Vladimir Serbinenko (phcoder@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7185
-gerrit
commit 296708b2872167f61c92b4183866ee071e10d13b Author: Vladimir Serbinenko phcoder@gmail.com Date: Wed Oct 22 10:42:42 2014 +0200
Rename mobo directories to match partnumber
It's needed to make board_status runnable without the tree.
Change-Id: Ie18ea7205f22d3c51a2d9244216881b47707416a Signed-off-by: Vladimir Serbinenko phcoder@gmail.com --- src/ec/acpi/Makefile.inc | 2 +- src/mainboard/a_trend/Kconfig | 4 +- src/mainboard/a_trend/atc-6220/Kconfig | 43 - src/mainboard/a_trend/atc-6220/board_info.txt | 6 - src/mainboard/a_trend/atc-6220/devicetree.cb | 59 - src/mainboard/a_trend/atc-6220/irq_tables.c | 50 - src/mainboard/a_trend/atc-6220/romstage.c | 57 - src/mainboard/a_trend/atc-6240/Kconfig | 43 - src/mainboard/a_trend/atc-6240/board_info.txt | 4 - src/mainboard/a_trend/atc-6240/devicetree.cb | 69 - src/mainboard/a_trend/atc-6240/irq_tables.c | 50 - src/mainboard/a_trend/atc-6240/romstage.c | 56 - src/mainboard/a_trend/atc_6220/Kconfig | 43 + src/mainboard/a_trend/atc_6220/board_info.txt | 6 + src/mainboard/a_trend/atc_6220/devicetree.cb | 59 + src/mainboard/a_trend/atc_6220/irq_tables.c | 50 + src/mainboard/a_trend/atc_6220/romstage.c | 57 + src/mainboard/a_trend/atc_6240/Kconfig | 43 + src/mainboard/a_trend/atc_6240/board_info.txt | 4 + src/mainboard/a_trend/atc_6240/devicetree.cb | 69 + src/mainboard/a_trend/atc_6240/irq_tables.c | 50 + src/mainboard/a_trend/atc_6240/romstage.c | 56 + src/mainboard/aaeon/Kconfig | 2 +- src/mainboard/aaeon/pfm-540i_revb/Kconfig | 27 - src/mainboard/aaeon/pfm-540i_revb/board_info.txt | 3 - src/mainboard/aaeon/pfm-540i_revb/devicetree.cb | 74 - src/mainboard/aaeon/pfm-540i_revb/irq_tables.c | 74 - src/mainboard/aaeon/pfm-540i_revb/mainboard.c | 36 - src/mainboard/aaeon/pfm-540i_revb/romstage.c | 85 - src/mainboard/aaeon/pfm_540i_revb/Kconfig | 27 + src/mainboard/aaeon/pfm_540i_revb/board_info.txt | 3 + src/mainboard/aaeon/pfm_540i_revb/devicetree.cb | 74 + src/mainboard/aaeon/pfm_540i_revb/irq_tables.c | 74 + src/mainboard/aaeon/pfm_540i_revb/mainboard.c | 36 + src/mainboard/aaeon/pfm_540i_revb/romstage.c | 85 + src/mainboard/abit/Kconfig | 2 +- src/mainboard/abit/be6-ii_v2_0/Kconfig | 43 - src/mainboard/abit/be6-ii_v2_0/board_info.txt | 5 - src/mainboard/abit/be6-ii_v2_0/devicetree.cb | 59 - src/mainboard/abit/be6-ii_v2_0/irq_tables.c | 52 - src/mainboard/abit/be6-ii_v2_0/romstage.c | 58 - src/mainboard/abit/be6_ii_v2_0/Kconfig | 43 + src/mainboard/abit/be6_ii_v2_0/board_info.txt | 5 + src/mainboard/abit/be6_ii_v2_0/devicetree.cb | 59 + src/mainboard/abit/be6_ii_v2_0/irq_tables.c | 52 + src/mainboard/abit/be6_ii_v2_0/romstage.c | 58 + src/mainboard/adlink/CM2-GF/board_info.txt | 2 +- src/mainboard/adlink/cExpress-GFR/board_info.txt | 2 +- src/mainboard/advansus/Kconfig | 2 +- src/mainboard/advansus/a785e-i/Kconfig | 92 - src/mainboard/advansus/a785e-i/Makefile.inc | 15 - src/mainboard/advansus/a785e-i/acpi/cpstate.asl | 75 - src/mainboard/advansus/a785e-i/acpi/routing.asl | 398 ----- src/mainboard/advansus/a785e-i/acpi/sata.asl | 149 -- src/mainboard/advansus/a785e-i/acpi/usb.asl | 161 -- src/mainboard/advansus/a785e-i/acpi_tables.c | 228 --- src/mainboard/advansus/a785e-i/board_info.txt | 5 - src/mainboard/advansus/a785e-i/cmos.layout | 96 - src/mainboard/advansus/a785e-i/devicetree.cb | 124 -- src/mainboard/advansus/a785e-i/dsdt.asl | 1818 ------------------- src/mainboard/advansus/a785e-i/get_bus_conf.c | 141 -- src/mainboard/advansus/a785e-i/irq_tables.c | 111 -- src/mainboard/advansus/a785e-i/mainboard.c | 86 - src/mainboard/advansus/a785e-i/mb_sysconf.h | 42 - src/mainboard/advansus/a785e-i/mptable.c | 92 - src/mainboard/advansus/a785e-i/platform_cfg.h | 219 --- src/mainboard/advansus/a785e-i/resourcemap.c | 278 --- src/mainboard/advansus/a785e-i/romstage.c | 253 --- src/mainboard/advansus/a785e_i/Kconfig | 92 + src/mainboard/advansus/a785e_i/Makefile.inc | 15 + src/mainboard/advansus/a785e_i/acpi/cpstate.asl | 75 + src/mainboard/advansus/a785e_i/acpi/routing.asl | 398 +++++ src/mainboard/advansus/a785e_i/acpi/sata.asl | 149 ++ src/mainboard/advansus/a785e_i/acpi/usb.asl | 161 ++ src/mainboard/advansus/a785e_i/acpi_tables.c | 228 +++ src/mainboard/advansus/a785e_i/board_info.txt | 5 + src/mainboard/advansus/a785e_i/cmos.layout | 96 + src/mainboard/advansus/a785e_i/devicetree.cb | 124 ++ src/mainboard/advansus/a785e_i/dsdt.asl | 1818 +++++++++++++++++++ src/mainboard/advansus/a785e_i/get_bus_conf.c | 141 ++ src/mainboard/advansus/a785e_i/irq_tables.c | 111 ++ src/mainboard/advansus/a785e_i/mainboard.c | 86 + src/mainboard/advansus/a785e_i/mb_sysconf.h | 42 + src/mainboard/advansus/a785e_i/mptable.c | 92 + src/mainboard/advansus/a785e_i/platform_cfg.h | 219 +++ src/mainboard/advansus/a785e_i/resourcemap.c | 278 +++ src/mainboard/advansus/a785e_i/romstage.c | 253 +++ src/mainboard/advantech/Kconfig | 2 +- src/mainboard/advantech/pcm-5820/Kconfig | 45 - src/mainboard/advantech/pcm-5820/board_info.txt | 5 - src/mainboard/advantech/pcm-5820/devicetree.cb | 56 - src/mainboard/advantech/pcm-5820/irq_tables.c | 45 - src/mainboard/advantech/pcm-5820/romstage.c | 41 - src/mainboard/advantech/pcm_5820/Kconfig | 45 + src/mainboard/advantech/pcm_5820/board_info.txt | 5 + src/mainboard/advantech/pcm_5820/devicetree.cb | 56 + src/mainboard/advantech/pcm_5820/irq_tables.c | 45 + src/mainboard/advantech/pcm_5820/romstage.c | 41 + src/mainboard/amd/Kconfig | 12 +- src/mainboard/amd/db_ft3/BiosCallOuts.c | 224 +++ src/mainboard/amd/db_ft3/Kconfig | 83 + src/mainboard/amd/db_ft3/Makefile.inc | 28 + src/mainboard/amd/db_ft3/OptionsIds.h | 67 + src/mainboard/amd/db_ft3/PlatformGnbPcie.c | 154 ++ src/mainboard/amd/db_ft3/PlatformGnbPcieComplex.h | 32 + src/mainboard/amd/db_ft3/acpi/AmdImc.asl | 114 ++ src/mainboard/amd/db_ft3/acpi/gpe.asl | 78 + src/mainboard/amd/db_ft3/acpi/ide.asl | 250 +++ src/mainboard/amd/db_ft3/acpi/mainboard.asl | 41 + src/mainboard/amd/db_ft3/acpi/routing.asl | 197 +++ src/mainboard/amd/db_ft3/acpi/sata.asl | 150 ++ src/mainboard/amd/db_ft3/acpi/si.asl | 27 + src/mainboard/amd/db_ft3/acpi/sleep.asl | 97 + src/mainboard/amd/db_ft3/acpi/superio.asl | 20 + src/mainboard/amd/db_ft3/acpi/thermal.asl | 20 + src/mainboard/amd/db_ft3/acpi/usb_oc.asl | 132 ++ src/mainboard/amd/db_ft3/acpi_tables.c | 286 +++ src/mainboard/amd/db_ft3/agesawrapper.c | 625 +++++++ src/mainboard/amd/db_ft3/agesawrapper.h | 61 + src/mainboard/amd/db_ft3/board_info.txt | 1 + src/mainboard/amd/db_ft3/buildOpts.c | 507 ++++++ src/mainboard/amd/db_ft3/cmos.layout | 114 ++ src/mainboard/amd/db_ft3/devicetree.cb | 76 + src/mainboard/amd/db_ft3/dsdt.asl | 91 + src/mainboard/amd/db_ft3/irq_tables.c | 107 ++ src/mainboard/amd/db_ft3/mainboard.c | 45 + src/mainboard/amd/db_ft3/mptable.c | 233 +++ src/mainboard/amd/db_ft3/romstage.c | 114 ++ src/mainboard/amd/db_ft3b/BiosCallOuts.c | 309 ++++ src/mainboard/amd/db_ft3b/Kconfig | 83 + src/mainboard/amd/db_ft3b/Makefile.inc | 26 + src/mainboard/amd/db_ft3b/PlatformGnbPcie.c | 126 ++ src/mainboard/amd/db_ft3b/PlatformGnbPcieComplex.h | 31 + src/mainboard/amd/db_ft3b/acpi/AmdImc.asl | 113 ++ src/mainboard/amd/db_ft3b/acpi/gpe.asl | 78 + src/mainboard/amd/db_ft3b/acpi/ide.asl | 1 + src/mainboard/amd/db_ft3b/acpi/mainboard.asl | 41 + src/mainboard/amd/db_ft3b/acpi/routing.asl | 197 +++ src/mainboard/amd/db_ft3b/acpi/sata.asl | 1 + src/mainboard/amd/db_ft3b/acpi/si.asl | 27 + src/mainboard/amd/db_ft3b/acpi/sleep.asl | 97 + src/mainboard/amd/db_ft3b/acpi/superio.asl | 1 + src/mainboard/amd/db_ft3b/acpi/thermal.asl | 1 + src/mainboard/amd/db_ft3b/acpi/usb_oc.asl | 41 + src/mainboard/amd/db_ft3b/acpi_tables.c | 286 +++ src/mainboard/amd/db_ft3b/agesawrapper.c | 658 +++++++ src/mainboard/amd/db_ft3b/agesawrapper.h | 61 + src/mainboard/amd/db_ft3b/board_info.txt | 6 + src/mainboard/amd/db_ft3b/cmos.layout | 114 ++ src/mainboard/amd/db_ft3b/devicetree.cb | 75 + src/mainboard/amd/db_ft3b/dsdt.asl | 91 + src/mainboard/amd/db_ft3b/irq_tables.c | 107 ++ src/mainboard/amd/db_ft3b/mainboard.c | 45 + src/mainboard/amd/db_ft3b/mptable.c | 194 ++ src/mainboard/amd/db_ft3b/romstage.c | 128 ++ src/mainboard/amd/olivehill/BiosCallOuts.c | 224 --- src/mainboard/amd/olivehill/Kconfig | 83 - src/mainboard/amd/olivehill/Makefile.inc | 28 - src/mainboard/amd/olivehill/OptionsIds.h | 67 - src/mainboard/amd/olivehill/PlatformGnbPcie.c | 154 -- .../amd/olivehill/PlatformGnbPcieComplex.h | 32 - src/mainboard/amd/olivehill/acpi/AmdImc.asl | 114 -- src/mainboard/amd/olivehill/acpi/gpe.asl | 78 - src/mainboard/amd/olivehill/acpi/ide.asl | 250 --- src/mainboard/amd/olivehill/acpi/mainboard.asl | 41 - src/mainboard/amd/olivehill/acpi/routing.asl | 197 --- src/mainboard/amd/olivehill/acpi/sata.asl | 150 -- src/mainboard/amd/olivehill/acpi/si.asl | 27 - src/mainboard/amd/olivehill/acpi/sleep.asl | 97 - src/mainboard/amd/olivehill/acpi/superio.asl | 20 - src/mainboard/amd/olivehill/acpi/thermal.asl | 20 - src/mainboard/amd/olivehill/acpi/usb_oc.asl | 132 -- src/mainboard/amd/olivehill/acpi_tables.c | 286 --- src/mainboard/amd/olivehill/agesawrapper.c | 625 ------- src/mainboard/amd/olivehill/agesawrapper.h | 61 - src/mainboard/amd/olivehill/board_info.txt | 1 - src/mainboard/amd/olivehill/buildOpts.c | 507 ------ src/mainboard/amd/olivehill/cmos.layout | 114 -- src/mainboard/amd/olivehill/devicetree.cb | 76 - src/mainboard/amd/olivehill/dsdt.asl | 91 - src/mainboard/amd/olivehill/irq_tables.c | 107 -- src/mainboard/amd/olivehill/mainboard.c | 45 - src/mainboard/amd/olivehill/mptable.c | 233 --- src/mainboard/amd/olivehill/romstage.c | 114 -- src/mainboard/amd/olivehillplus/BiosCallOuts.c | 309 ---- src/mainboard/amd/olivehillplus/Kconfig | 83 - src/mainboard/amd/olivehillplus/Makefile.inc | 26 - src/mainboard/amd/olivehillplus/PlatformGnbPcie.c | 126 -- .../amd/olivehillplus/PlatformGnbPcieComplex.h | 31 - src/mainboard/amd/olivehillplus/acpi/AmdImc.asl | 113 -- src/mainboard/amd/olivehillplus/acpi/gpe.asl | 78 - src/mainboard/amd/olivehillplus/acpi/ide.asl | 1 - src/mainboard/amd/olivehillplus/acpi/mainboard.asl | 41 - src/mainboard/amd/olivehillplus/acpi/routing.asl | 197 --- src/mainboard/amd/olivehillplus/acpi/sata.asl | 1 - src/mainboard/amd/olivehillplus/acpi/si.asl | 27 - src/mainboard/amd/olivehillplus/acpi/sleep.asl | 97 - src/mainboard/amd/olivehillplus/acpi/superio.asl | 1 - src/mainboard/amd/olivehillplus/acpi/thermal.asl | 1 - src/mainboard/amd/olivehillplus/acpi/usb_oc.asl | 41 - src/mainboard/amd/olivehillplus/acpi_tables.c | 286 --- src/mainboard/amd/olivehillplus/agesawrapper.c | 658 ------- src/mainboard/amd/olivehillplus/agesawrapper.h | 61 - src/mainboard/amd/olivehillplus/board_info.txt | 6 - src/mainboard/amd/olivehillplus/cmos.layout | 114 -- src/mainboard/amd/olivehillplus/devicetree.cb | 75 - src/mainboard/amd/olivehillplus/dsdt.asl | 91 - src/mainboard/amd/olivehillplus/irq_tables.c | 107 -- src/mainboard/amd/olivehillplus/mainboard.c | 45 - src/mainboard/amd/olivehillplus/mptable.c | 194 -- src/mainboard/amd/olivehillplus/romstage.c | 128 -- src/mainboard/amd/samba/board_info.txt | 2 +- src/mainboard/amd/south_station/BiosCallOuts.c | 210 --- src/mainboard/amd/south_station/Kconfig | 92 - src/mainboard/amd/south_station/Makefile.inc | 28 - src/mainboard/amd/south_station/OptionsIds.h | 64 - src/mainboard/amd/south_station/PlatformGnbPcie.c | 146 -- .../amd/south_station/PlatformGnbPcieComplex.h | 72 - src/mainboard/amd/south_station/acpi/gpe.asl | 82 - src/mainboard/amd/south_station/acpi/ide.asl | 244 --- src/mainboard/amd/south_station/acpi/mainboard.asl | 67 - src/mainboard/amd/south_station/acpi/routing.asl | 407 ----- src/mainboard/amd/south_station/acpi/sata.asl | 149 -- src/mainboard/amd/south_station/acpi/sleep.asl | 120 -- src/mainboard/amd/south_station/acpi/superio.asl | 20 - src/mainboard/amd/south_station/acpi/thermal.asl | 90 - src/mainboard/amd/south_station/acpi/usb_oc.asl | 174 -- src/mainboard/amd/south_station/acpi_tables.c | 268 --- src/mainboard/amd/south_station/agesawrapper.c | 473 ----- src/mainboard/amd/south_station/agesawrapper.h | 57 - src/mainboard/amd/south_station/board_info.txt | 6 - src/mainboard/amd/south_station/buildOpts.c | 457 ----- src/mainboard/amd/south_station/cmos.layout | 116 -- src/mainboard/amd/south_station/devicetree.cb | 112 -- src/mainboard/amd/south_station/dsdt.asl | 69 - src/mainboard/amd/south_station/irq_tables.c | 115 -- src/mainboard/amd/south_station/mainboard.c | 97 - src/mainboard/amd/south_station/mptable.c | 153 -- src/mainboard/amd/south_station/platform_cfg.h | 214 --- src/mainboard/amd/south_station/romstage.c | 97 - src/mainboard/amd/southstation/BiosCallOuts.c | 210 +++ src/mainboard/amd/southstation/Kconfig | 92 + src/mainboard/amd/southstation/Makefile.inc | 28 + src/mainboard/amd/southstation/OptionsIds.h | 64 + src/mainboard/amd/southstation/PlatformGnbPcie.c | 146 ++ .../amd/southstation/PlatformGnbPcieComplex.h | 72 + src/mainboard/amd/southstation/acpi/gpe.asl | 82 + src/mainboard/amd/southstation/acpi/ide.asl | 244 +++ src/mainboard/amd/southstation/acpi/mainboard.asl | 67 + src/mainboard/amd/southstation/acpi/routing.asl | 407 +++++ src/mainboard/amd/southstation/acpi/sata.asl | 149 ++ src/mainboard/amd/southstation/acpi/sleep.asl | 120 ++ src/mainboard/amd/southstation/acpi/superio.asl | 20 + src/mainboard/amd/southstation/acpi/thermal.asl | 90 + src/mainboard/amd/southstation/acpi/usb_oc.asl | 174 ++ src/mainboard/amd/southstation/acpi_tables.c | 268 +++ src/mainboard/amd/southstation/agesawrapper.c | 473 +++++ src/mainboard/amd/southstation/agesawrapper.h | 57 + src/mainboard/amd/southstation/board_info.txt | 6 + src/mainboard/amd/southstation/buildOpts.c | 457 +++++ src/mainboard/amd/southstation/cmos.layout | 116 ++ src/mainboard/amd/southstation/devicetree.cb | 112 ++ src/mainboard/amd/southstation/dsdt.asl | 69 + src/mainboard/amd/southstation/irq_tables.c | 115 ++ src/mainboard/amd/southstation/mainboard.c | 97 + src/mainboard/amd/southstation/mptable.c | 153 ++ src/mainboard/amd/southstation/platform_cfg.h | 214 +++ src/mainboard/amd/southstation/romstage.c | 97 + src/mainboard/amd/union_station/BiosCallOuts.c | 210 --- src/mainboard/amd/union_station/Kconfig | 91 - src/mainboard/amd/union_station/Makefile.inc | 28 - src/mainboard/amd/union_station/OptionsIds.h | 64 - src/mainboard/amd/union_station/PlatformGnbPcie.c | 152 -- .../amd/union_station/PlatformGnbPcieComplex.h | 72 - src/mainboard/amd/union_station/acpi/gpe.asl | 82 - src/mainboard/amd/union_station/acpi/ide.asl | 244 --- src/mainboard/amd/union_station/acpi/mainboard.asl | 67 - src/mainboard/amd/union_station/acpi/routing.asl | 407 ----- src/mainboard/amd/union_station/acpi/sata.asl | 149 -- src/mainboard/amd/union_station/acpi/sleep.asl | 120 -- src/mainboard/amd/union_station/acpi/superio.asl | 20 - src/mainboard/amd/union_station/acpi/thermal.asl | 90 - src/mainboard/amd/union_station/acpi/usb_oc.asl | 174 -- src/mainboard/amd/union_station/acpi_tables.c | 268 --- src/mainboard/amd/union_station/agesawrapper.c | 473 ----- src/mainboard/amd/union_station/agesawrapper.h | 57 - src/mainboard/amd/union_station/board_info.txt | 6 - src/mainboard/amd/union_station/buildOpts.c | 457 ----- src/mainboard/amd/union_station/cmos.layout | 116 -- src/mainboard/amd/union_station/devicetree.cb | 88 - src/mainboard/amd/union_station/dsdt.asl | 69 - src/mainboard/amd/union_station/irq_tables.c | 115 -- src/mainboard/amd/union_station/mainboard.c | 69 - src/mainboard/amd/union_station/mptable.c | 153 -- src/mainboard/amd/union_station/platform_cfg.h | 214 --- src/mainboard/amd/union_station/romstage.c | 91 - src/mainboard/amd/unionstation/BiosCallOuts.c | 210 +++ src/mainboard/amd/unionstation/Kconfig | 91 + src/mainboard/amd/unionstation/Makefile.inc | 28 + src/mainboard/amd/unionstation/OptionsIds.h | 64 + src/mainboard/amd/unionstation/PlatformGnbPcie.c | 152 ++ .../amd/unionstation/PlatformGnbPcieComplex.h | 72 + src/mainboard/amd/unionstation/acpi/gpe.asl | 82 + src/mainboard/amd/unionstation/acpi/ide.asl | 244 +++ src/mainboard/amd/unionstation/acpi/mainboard.asl | 67 + src/mainboard/amd/unionstation/acpi/routing.asl | 407 +++++ src/mainboard/amd/unionstation/acpi/sata.asl | 149 ++ src/mainboard/amd/unionstation/acpi/sleep.asl | 120 ++ src/mainboard/amd/unionstation/acpi/superio.asl | 20 + src/mainboard/amd/unionstation/acpi/thermal.asl | 90 + src/mainboard/amd/unionstation/acpi/usb_oc.asl | 174 ++ src/mainboard/amd/unionstation/acpi_tables.c | 268 +++ src/mainboard/amd/unionstation/agesawrapper.c | 473 +++++ src/mainboard/amd/unionstation/agesawrapper.h | 57 + src/mainboard/amd/unionstation/board_info.txt | 6 + src/mainboard/amd/unionstation/buildOpts.c | 457 +++++ src/mainboard/amd/unionstation/cmos.layout | 116 ++ src/mainboard/amd/unionstation/devicetree.cb | 88 + src/mainboard/amd/unionstation/dsdt.asl | 69 + src/mainboard/amd/unionstation/irq_tables.c | 115 ++ src/mainboard/amd/unionstation/mainboard.c | 69 + src/mainboard/amd/unionstation/mptable.c | 153 ++ src/mainboard/amd/unionstation/platform_cfg.h | 214 +++ src/mainboard/amd/unionstation/romstage.c | 91 + src/mainboard/aopen/Kconfig | 4 +- src/mainboard/aopen/dxpl_plus_u/Kconfig | 41 + src/mainboard/aopen/dxpl_plus_u/acpi/e7505_pri.asl | 85 + src/mainboard/aopen/dxpl_plus_u/acpi/e7505_sec.asl | 71 + src/mainboard/aopen/dxpl_plus_u/acpi/i82801db.asl | 168 ++ src/mainboard/aopen/dxpl_plus_u/acpi/p64h2.asl | 95 + src/mainboard/aopen/dxpl_plus_u/acpi/power.asl | 94 + src/mainboard/aopen/dxpl_plus_u/acpi/scsi.asl | 62 + src/mainboard/aopen/dxpl_plus_u/acpi/superio.asl | 182 ++ src/mainboard/aopen/dxpl_plus_u/acpi_tables.c | 85 + src/mainboard/aopen/dxpl_plus_u/board_info.txt | 6 + src/mainboard/aopen/dxpl_plus_u/bus.h | 42 + src/mainboard/aopen/dxpl_plus_u/devicetree.cb | 90 + src/mainboard/aopen/dxpl_plus_u/dsdt.asl | 114 ++ src/mainboard/aopen/dxpl_plus_u/fadt.c | 166 ++ src/mainboard/aopen/dxpl_plus_u/irq_tables.c | 76 + src/mainboard/aopen/dxpl_plus_u/romstage.c | 85 + src/mainboard/aopen/dxplplusu/Kconfig | 41 - src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl | 85 - src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl | 71 - src/mainboard/aopen/dxplplusu/acpi/i82801db.asl | 168 -- src/mainboard/aopen/dxplplusu/acpi/p64h2.asl | 95 - src/mainboard/aopen/dxplplusu/acpi/power.asl | 94 - src/mainboard/aopen/dxplplusu/acpi/scsi.asl | 62 - src/mainboard/aopen/dxplplusu/acpi/superio.asl | 182 -- src/mainboard/aopen/dxplplusu/acpi_tables.c | 85 - src/mainboard/aopen/dxplplusu/board_info.txt | 6 - src/mainboard/aopen/dxplplusu/bus.h | 42 - src/mainboard/aopen/dxplplusu/devicetree.cb | 90 - src/mainboard/aopen/dxplplusu/dsdt.asl | 114 -- src/mainboard/aopen/dxplplusu/fadt.c | 166 -- src/mainboard/aopen/dxplplusu/irq_tables.c | 76 - src/mainboard/aopen/dxplplusu/romstage.c | 85 - src/mainboard/apple/Kconfig | 8 +- src/mainboard/apple/macbook11/Kconfig | 7 - src/mainboard/apple/macbook11/board_info.txt | 8 - src/mainboard/apple/macbook1_1/Kconfig | 7 + src/mainboard/apple/macbook1_1/board_info.txt | 8 + src/mainboard/apple/macbook21/Kconfig | 64 - src/mainboard/apple/macbook21/acpi/ec.asl | 232 --- .../apple/macbook21/acpi/i945_pci_irqs.asl | 71 - .../apple/macbook21/acpi/ich7_pci_irqs.asl | 74 - src/mainboard/apple/macbook21/acpi/platform.asl | 192 -- src/mainboard/apple/macbook21/acpi/superio.asl | 0 src/mainboard/apple/macbook21/acpi/video.asl | 51 - src/mainboard/apple/macbook21/acpi_tables.c | 91 - src/mainboard/apple/macbook21/board_info.txt | 6 - src/mainboard/apple/macbook21/cmos.default | 21 - src/mainboard/apple/macbook21/cmos.layout | 162 -- src/mainboard/apple/macbook21/devicetree.cb | 107 -- src/mainboard/apple/macbook21/dsdt.asl | 51 - src/mainboard/apple/macbook21/fadt.c | 27 - src/mainboard/apple/macbook21/hda_verb.c | 66 - src/mainboard/apple/macbook21/irq_tables.c | 61 - src/mainboard/apple/macbook21/mainboard.c | 57 - src/mainboard/apple/macbook21/mptable.c | 76 - src/mainboard/apple/macbook21/romstage.c | 414 ----- src/mainboard/apple/macbook21/smihandler.c | 90 - src/mainboard/apple/macbook2_1/Kconfig | 64 + src/mainboard/apple/macbook2_1/acpi/ec.asl | 232 +++ .../apple/macbook2_1/acpi/i945_pci_irqs.asl | 71 + .../apple/macbook2_1/acpi/ich7_pci_irqs.asl | 74 + src/mainboard/apple/macbook2_1/acpi/platform.asl | 192 ++ src/mainboard/apple/macbook2_1/acpi/superio.asl | 0 src/mainboard/apple/macbook2_1/acpi/video.asl | 51 + src/mainboard/apple/macbook2_1/acpi_tables.c | 91 + src/mainboard/apple/macbook2_1/board_info.txt | 6 + src/mainboard/apple/macbook2_1/cmos.default | 21 + src/mainboard/apple/macbook2_1/cmos.layout | 162 ++ src/mainboard/apple/macbook2_1/devicetree.cb | 107 ++ src/mainboard/apple/macbook2_1/dsdt.asl | 51 + src/mainboard/apple/macbook2_1/fadt.c | 27 + src/mainboard/apple/macbook2_1/hda_verb.c | 66 + src/mainboard/apple/macbook2_1/irq_tables.c | 61 + src/mainboard/apple/macbook2_1/mainboard.c | 57 + src/mainboard/apple/macbook2_1/mptable.c | 76 + src/mainboard/apple/macbook2_1/romstage.c | 414 +++++ src/mainboard/apple/macbook2_1/smihandler.c | 90 + src/mainboard/artec_group/dbe61/Kconfig | 2 +- src/mainboard/asrock/Kconfig | 2 +- src/mainboard/asrock/imb-a180/BiosCallOuts.c | 337 ---- src/mainboard/asrock/imb-a180/Kconfig | 92 - src/mainboard/asrock/imb-a180/Makefile.inc | 28 - src/mainboard/asrock/imb-a180/OptionsIds.h | 67 - src/mainboard/asrock/imb-a180/PlatformGnbPcie.c | 154 -- .../asrock/imb-a180/PlatformGnbPcieComplex.h | 32 - src/mainboard/asrock/imb-a180/acpi/AmdImc.asl | 114 -- src/mainboard/asrock/imb-a180/acpi/gpe.asl | 78 - src/mainboard/asrock/imb-a180/acpi/ide.asl | 250 --- src/mainboard/asrock/imb-a180/acpi/mainboard.asl | 41 - src/mainboard/asrock/imb-a180/acpi/routing.asl | 197 --- src/mainboard/asrock/imb-a180/acpi/sata.asl | 150 -- src/mainboard/asrock/imb-a180/acpi/si.asl | 27 - src/mainboard/asrock/imb-a180/acpi/sleep.asl | 97 - src/mainboard/asrock/imb-a180/acpi/superio.asl | 20 - src/mainboard/asrock/imb-a180/acpi/thermal.asl | 20 - src/mainboard/asrock/imb-a180/acpi/usb_oc.asl | 132 -- src/mainboard/asrock/imb-a180/acpi_tables.c | 286 --- src/mainboard/asrock/imb-a180/agesawrapper.c | 654 ------- src/mainboard/asrock/imb-a180/agesawrapper.h | 61 - src/mainboard/asrock/imb-a180/board_info.txt | 6 - src/mainboard/asrock/imb-a180/buildOpts.c | 507 ------ src/mainboard/asrock/imb-a180/cmos.layout | 114 -- src/mainboard/asrock/imb-a180/devicetree.cb | 117 -- src/mainboard/asrock/imb-a180/dsdt.asl | 91 - src/mainboard/asrock/imb-a180/irq_tables.c | 107 -- src/mainboard/asrock/imb-a180/mainboard.c | 45 - src/mainboard/asrock/imb-a180/mptable.c | 234 --- src/mainboard/asrock/imb-a180/romstage.c | 138 -- src/mainboard/asrock/imb_a180/BiosCallOuts.c | 337 ++++ src/mainboard/asrock/imb_a180/Kconfig | 92 + src/mainboard/asrock/imb_a180/Makefile.inc | 28 + src/mainboard/asrock/imb_a180/OptionsIds.h | 67 + src/mainboard/asrock/imb_a180/PlatformGnbPcie.c | 154 ++ .../asrock/imb_a180/PlatformGnbPcieComplex.h | 32 + src/mainboard/asrock/imb_a180/acpi/AmdImc.asl | 114 ++ src/mainboard/asrock/imb_a180/acpi/gpe.asl | 78 + src/mainboard/asrock/imb_a180/acpi/ide.asl | 250 +++ src/mainboard/asrock/imb_a180/acpi/mainboard.asl | 41 + src/mainboard/asrock/imb_a180/acpi/routing.asl | 197 +++ src/mainboard/asrock/imb_a180/acpi/sata.asl | 150 ++ src/mainboard/asrock/imb_a180/acpi/si.asl | 27 + src/mainboard/asrock/imb_a180/acpi/sleep.asl | 97 + src/mainboard/asrock/imb_a180/acpi/superio.asl | 20 + src/mainboard/asrock/imb_a180/acpi/thermal.asl | 20 + src/mainboard/asrock/imb_a180/acpi/usb_oc.asl | 132 ++ src/mainboard/asrock/imb_a180/acpi_tables.c | 286 +++ src/mainboard/asrock/imb_a180/agesawrapper.c | 654 +++++++ src/mainboard/asrock/imb_a180/agesawrapper.h | 61 + src/mainboard/asrock/imb_a180/board_info.txt | 6 + src/mainboard/asrock/imb_a180/buildOpts.c | 507 ++++++ src/mainboard/asrock/imb_a180/cmos.layout | 114 ++ src/mainboard/asrock/imb_a180/devicetree.cb | 117 ++ src/mainboard/asrock/imb_a180/dsdt.asl | 91 + src/mainboard/asrock/imb_a180/irq_tables.c | 107 ++ src/mainboard/asrock/imb_a180/mainboard.c | 45 + src/mainboard/asrock/imb_a180/mptable.c | 234 +++ src/mainboard/asrock/imb_a180/romstage.c | 138 ++ src/mainboard/asus/Kconfig | 34 +- src/mainboard/asus/a8v-e_deluxe/Kconfig | 68 - src/mainboard/asus/a8v-e_deluxe/acpi_tables.c | 69 - src/mainboard/asus/a8v-e_deluxe/board_info.txt | 5 - src/mainboard/asus/a8v-e_deluxe/cmos.layout | 96 - src/mainboard/asus/a8v-e_deluxe/devicetree.cb | 97 - src/mainboard/asus/a8v-e_deluxe/dsdt.asl | 204 --- src/mainboard/asus/a8v-e_deluxe/mptable.c | 116 -- src/mainboard/asus/a8v-e_deluxe/romstage.c | 214 --- src/mainboard/asus/a8v-e_se/Kconfig | 68 - src/mainboard/asus/a8v-e_se/acpi_tables.c | 71 - src/mainboard/asus/a8v-e_se/board_info.txt | 6 - src/mainboard/asus/a8v-e_se/cmos.layout | 96 - src/mainboard/asus/a8v-e_se/devicetree.cb | 97 - src/mainboard/asus/a8v-e_se/dsdt.asl | 249 --- src/mainboard/asus/a8v-e_se/mptable.c | 116 -- src/mainboard/asus/a8v-e_se/romstage.c | 214 --- src/mainboard/asus/a8v_e_deluxe/Kconfig | 68 + src/mainboard/asus/a8v_e_deluxe/acpi_tables.c | 69 + src/mainboard/asus/a8v_e_deluxe/board_info.txt | 5 + src/mainboard/asus/a8v_e_deluxe/cmos.layout | 96 + src/mainboard/asus/a8v_e_deluxe/devicetree.cb | 97 + src/mainboard/asus/a8v_e_deluxe/dsdt.asl | 204 +++ src/mainboard/asus/a8v_e_deluxe/mptable.c | 116 ++ src/mainboard/asus/a8v_e_deluxe/romstage.c | 214 +++ src/mainboard/asus/a8v_e_se/Kconfig | 68 + src/mainboard/asus/a8v_e_se/acpi_tables.c | 71 + src/mainboard/asus/a8v_e_se/board_info.txt | 6 + src/mainboard/asus/a8v_e_se/cmos.layout | 96 + src/mainboard/asus/a8v_e_se/devicetree.cb | 97 + src/mainboard/asus/a8v_e_se/dsdt.asl | 249 +++ src/mainboard/asus/a8v_e_se/mptable.c | 116 ++ src/mainboard/asus/a8v_e_se/romstage.c | 214 +++ src/mainboard/asus/f2a85-m/BiosCallOuts.c | 111 -- src/mainboard/asus/f2a85-m/Kconfig | 109 -- src/mainboard/asus/f2a85-m/Makefile.inc | 28 - src/mainboard/asus/f2a85-m/OptionsIds.h | 67 - src/mainboard/asus/f2a85-m/PlatformGnbPcie.c | 200 --- .../asus/f2a85-m/PlatformGnbPcieComplex.h | 31 - src/mainboard/asus/f2a85-m/acpi/AmdImc.asl | 97 - src/mainboard/asus/f2a85-m/acpi/cpstate.asl | 115 -- src/mainboard/asus/f2a85-m/acpi/gpe.asl | 76 - src/mainboard/asus/f2a85-m/acpi/mainboard.asl | 36 - src/mainboard/asus/f2a85-m/acpi/routing.asl | 262 --- src/mainboard/asus/f2a85-m/acpi/sata.asl | 20 - src/mainboard/asus/f2a85-m/acpi/si.asl | 26 - src/mainboard/asus/f2a85-m/acpi/sleep.asl | 100 -- src/mainboard/asus/f2a85-m/acpi/superio.asl | 20 - src/mainboard/asus/f2a85-m/acpi/thermal.asl | 20 - src/mainboard/asus/f2a85-m/acpi/usb_oc.asl | 31 - src/mainboard/asus/f2a85-m/acpi_tables.c | 280 --- src/mainboard/asus/f2a85-m/agesawrapper.c | 645 ------- src/mainboard/asus/f2a85-m/agesawrapper.h | 60 - src/mainboard/asus/f2a85-m/board_info.txt | 6 - src/mainboard/asus/f2a85-m/buildOpts.c | 511 ------ src/mainboard/asus/f2a85-m/cmos.layout | 114 -- src/mainboard/asus/f2a85-m/devicetree.cb | 139 -- src/mainboard/asus/f2a85-m/dsdt.asl | 113 -- src/mainboard/asus/f2a85-m/irq_tables.c | 107 -- src/mainboard/asus/f2a85-m/mainboard.c | 60 - src/mainboard/asus/f2a85-m/mptable.c | 188 -- src/mainboard/asus/f2a85-m/romstage.c | 157 -- src/mainboard/asus/f2a85_m/BiosCallOuts.c | 111 ++ src/mainboard/asus/f2a85_m/Kconfig | 109 ++ src/mainboard/asus/f2a85_m/Makefile.inc | 28 + src/mainboard/asus/f2a85_m/OptionsIds.h | 67 + src/mainboard/asus/f2a85_m/PlatformGnbPcie.c | 200 +++ .../asus/f2a85_m/PlatformGnbPcieComplex.h | 31 + src/mainboard/asus/f2a85_m/acpi/AmdImc.asl | 97 + src/mainboard/asus/f2a85_m/acpi/cpstate.asl | 115 ++ src/mainboard/asus/f2a85_m/acpi/gpe.asl | 76 + src/mainboard/asus/f2a85_m/acpi/mainboard.asl | 36 + src/mainboard/asus/f2a85_m/acpi/routing.asl | 262 +++ src/mainboard/asus/f2a85_m/acpi/sata.asl | 20 + src/mainboard/asus/f2a85_m/acpi/si.asl | 26 + src/mainboard/asus/f2a85_m/acpi/sleep.asl | 100 ++ src/mainboard/asus/f2a85_m/acpi/superio.asl | 20 + src/mainboard/asus/f2a85_m/acpi/thermal.asl | 20 + src/mainboard/asus/f2a85_m/acpi/usb_oc.asl | 31 + src/mainboard/asus/f2a85_m/acpi_tables.c | 280 +++ src/mainboard/asus/f2a85_m/agesawrapper.c | 645 +++++++ src/mainboard/asus/f2a85_m/agesawrapper.h | 60 + src/mainboard/asus/f2a85_m/board_info.txt | 6 + src/mainboard/asus/f2a85_m/buildOpts.c | 511 ++++++ src/mainboard/asus/f2a85_m/cmos.layout | 114 ++ src/mainboard/asus/f2a85_m/devicetree.cb | 139 ++ src/mainboard/asus/f2a85_m/dsdt.asl | 113 ++ src/mainboard/asus/f2a85_m/irq_tables.c | 107 ++ src/mainboard/asus/f2a85_m/mainboard.c | 60 + src/mainboard/asus/f2a85_m/mptable.c | 188 ++ src/mainboard/asus/f2a85_m/romstage.c | 157 ++ src/mainboard/asus/k8v-x/Kconfig | 71 - src/mainboard/asus/k8v-x/acpi_tables.c | 71 - src/mainboard/asus/k8v-x/board_info.txt | 1 - src/mainboard/asus/k8v-x/cmos.layout | 96 - src/mainboard/asus/k8v-x/devicetree.cb | 98 - src/mainboard/asus/k8v-x/dsdt.asl | 186 -- src/mainboard/asus/k8v-x/mainboard.c | 59 - src/mainboard/asus/k8v-x/mptable.c | 116 -- src/mainboard/asus/k8v-x/romstage.c | 190 -- src/mainboard/asus/k8v_x/Kconfig | 71 + src/mainboard/asus/k8v_x/acpi_tables.c | 71 + src/mainboard/asus/k8v_x/board_info.txt | 1 + src/mainboard/asus/k8v_x/cmos.layout | 96 + src/mainboard/asus/k8v_x/devicetree.cb | 98 + src/mainboard/asus/k8v_x/dsdt.asl | 186 ++ src/mainboard/asus/k8v_x/mainboard.c | 59 + src/mainboard/asus/k8v_x/mptable.c | 116 ++ src/mainboard/asus/k8v_x/romstage.c | 190 ++ src/mainboard/asus/m2n-e/Kconfig | 88 - src/mainboard/asus/m2n-e/Makefile.inc | 21 - src/mainboard/asus/m2n-e/board_info.txt | 6 - src/mainboard/asus/m2n-e/cmos.layout | 116 -- src/mainboard/asus/m2n-e/devicetree.cb | 121 -- src/mainboard/asus/m2n-e/fanctl.c | 64 - src/mainboard/asus/m2n-e/get_bus_conf.c | 121 -- src/mainboard/asus/m2n-e/hda_verb.c | 81 - src/mainboard/asus/m2n-e/mainboard.c | 30 - src/mainboard/asus/m2n-e/mptable.c | 105 -- src/mainboard/asus/m2n-e/resourcemap.c | 281 --- src/mainboard/asus/m2n-e/romstage.c | 165 -- src/mainboard/asus/m2n_e/Kconfig | 88 + src/mainboard/asus/m2n_e/Makefile.inc | 21 + src/mainboard/asus/m2n_e/board_info.txt | 6 + src/mainboard/asus/m2n_e/cmos.layout | 116 ++ src/mainboard/asus/m2n_e/devicetree.cb | 121 ++ src/mainboard/asus/m2n_e/fanctl.c | 64 + src/mainboard/asus/m2n_e/get_bus_conf.c | 121 ++ src/mainboard/asus/m2n_e/hda_verb.c | 81 + src/mainboard/asus/m2n_e/mainboard.c | 30 + src/mainboard/asus/m2n_e/mptable.c | 105 ++ src/mainboard/asus/m2n_e/resourcemap.c | 281 +++ src/mainboard/asus/m2n_e/romstage.c | 165 ++ src/mainboard/asus/m2v-mx_se/Kconfig | 82 - src/mainboard/asus/m2v-mx_se/acpi_tables.c | 72 - src/mainboard/asus/m2v-mx_se/board_info.txt | 6 - src/mainboard/asus/m2v-mx_se/cmos.layout | 104 -- src/mainboard/asus/m2v-mx_se/devicetree.cb | 77 - src/mainboard/asus/m2v-mx_se/dsdt.asl | 253 --- src/mainboard/asus/m2v-mx_se/romstage.c | 191 -- src/mainboard/asus/m2v/dsdt.asl | 2 +- src/mainboard/asus/m2v_mx_se/Kconfig | 82 + src/mainboard/asus/m2v_mx_se/acpi_tables.c | 72 + src/mainboard/asus/m2v_mx_se/board_info.txt | 6 + src/mainboard/asus/m2v_mx_se/cmos.layout | 104 ++ src/mainboard/asus/m2v_mx_se/devicetree.cb | 77 + src/mainboard/asus/m2v_mx_se/dsdt.asl | 253 +++ src/mainboard/asus/m2v_mx_se/romstage.c | 191 ++ src/mainboard/asus/m4a78-em/Kconfig | 75 - src/mainboard/asus/m4a78-em/acpi/cpstate.asl | 75 - src/mainboard/asus/m4a78-em/acpi/ide.asl | 244 --- src/mainboard/asus/m4a78-em/acpi/routing.asl | 300 ---- src/mainboard/asus/m4a78-em/acpi/sata.asl | 149 -- src/mainboard/asus/m4a78-em/acpi/usb.asl | 161 -- src/mainboard/asus/m4a78-em/acpi_tables.c | 221 --- src/mainboard/asus/m4a78-em/board_info.txt | 6 - src/mainboard/asus/m4a78-em/cmos.layout | 96 - src/mainboard/asus/m4a78-em/devicetree.cb | 106 -- src/mainboard/asus/m4a78-em/dsdt.asl | 1850 ------------------- src/mainboard/asus/m4a78-em/get_bus_conf.c | 116 -- src/mainboard/asus/m4a78-em/irq_tables.c | 64 - src/mainboard/asus/m4a78-em/mainboard.c | 132 -- src/mainboard/asus/m4a78-em/mb_sysconf.h | 43 - src/mainboard/asus/m4a78-em/mptable.c | 114 -- src/mainboard/asus/m4a78-em/resourcemap.c | 280 --- src/mainboard/asus/m4a78-em/romstage.c | 256 --- src/mainboard/asus/m4a785-m/Kconfig | 76 - src/mainboard/asus/m4a785-m/acpi/cpstate.asl | 75 - src/mainboard/asus/m4a785-m/acpi/ide.asl | 244 --- src/mainboard/asus/m4a785-m/acpi/routing.asl | 300 ---- src/mainboard/asus/m4a785-m/acpi/sata.asl | 149 -- src/mainboard/asus/m4a785-m/acpi/usb.asl | 161 -- src/mainboard/asus/m4a785-m/acpi_tables.c | 191 -- src/mainboard/asus/m4a785-m/board_info.txt | 6 - src/mainboard/asus/m4a785-m/cmos.layout | 96 - src/mainboard/asus/m4a785-m/devicetree.cb | 106 -- src/mainboard/asus/m4a785-m/dsdt.asl | 1850 ------------------- src/mainboard/asus/m4a785-m/get_bus_conf.c | 116 -- src/mainboard/asus/m4a785-m/irq_tables.c | 65 - src/mainboard/asus/m4a785-m/mainboard.c | 204 --- src/mainboard/asus/m4a785-m/mb_sysconf.h | 43 - src/mainboard/asus/m4a785-m/mptable.c | 114 -- src/mainboard/asus/m4a785-m/resourcemap.c | 280 --- src/mainboard/asus/m4a785-m/romstage.c | 265 --- src/mainboard/asus/m4a785_m/Kconfig | 76 + src/mainboard/asus/m4a785_m/acpi/cpstate.asl | 75 + src/mainboard/asus/m4a785_m/acpi/ide.asl | 244 +++ src/mainboard/asus/m4a785_m/acpi/routing.asl | 300 ++++ src/mainboard/asus/m4a785_m/acpi/sata.asl | 149 ++ src/mainboard/asus/m4a785_m/acpi/usb.asl | 161 ++ src/mainboard/asus/m4a785_m/acpi_tables.c | 191 ++ src/mainboard/asus/m4a785_m/board_info.txt | 6 + src/mainboard/asus/m4a785_m/cmos.layout | 96 + src/mainboard/asus/m4a785_m/devicetree.cb | 106 ++ src/mainboard/asus/m4a785_m/dsdt.asl | 1850 +++++++++++++++++++ src/mainboard/asus/m4a785_m/get_bus_conf.c | 116 ++ src/mainboard/asus/m4a785_m/irq_tables.c | 65 + src/mainboard/asus/m4a785_m/mainboard.c | 204 +++ src/mainboard/asus/m4a785_m/mb_sysconf.h | 43 + src/mainboard/asus/m4a785_m/mptable.c | 114 ++ src/mainboard/asus/m4a785_m/resourcemap.c | 280 +++ src/mainboard/asus/m4a785_m/romstage.c | 265 +++ src/mainboard/asus/m4a785t-m/Kconfig | 78 - src/mainboard/asus/m4a785t-m/acpi/cpstate.asl | 95 - src/mainboard/asus/m4a785t-m/acpi/ide.asl | 244 --- src/mainboard/asus/m4a785t-m/acpi/routing.asl | 300 ---- src/mainboard/asus/m4a785t-m/acpi/sata.asl | 149 -- src/mainboard/asus/m4a785t-m/acpi/usb.asl | 161 -- src/mainboard/asus/m4a785t-m/acpi_tables.c | 21 - src/mainboard/asus/m4a785t-m/board_info.txt | 6 - src/mainboard/asus/m4a785t-m/cmos.default | 18 - src/mainboard/asus/m4a785t-m/cmos.layout | 96 - src/mainboard/asus/m4a785t-m/devicetree.cb | 108 -- src/mainboard/asus/m4a785t-m/dsdt.asl | 1773 ------------------- src/mainboard/asus/m4a785t-m/get_bus_conf.c | 21 - src/mainboard/asus/m4a785t-m/irq_tables.c | 21 - src/mainboard/asus/m4a785t-m/mainboard.c | 21 - src/mainboard/asus/m4a785t-m/mptable.c | 21 - src/mainboard/asus/m4a785t-m/romstage.c | 21 - src/mainboard/asus/m4a785t_m/Kconfig | 78 + src/mainboard/asus/m4a785t_m/acpi/cpstate.asl | 95 + src/mainboard/asus/m4a785t_m/acpi/ide.asl | 244 +++ src/mainboard/asus/m4a785t_m/acpi/routing.asl | 300 ++++ src/mainboard/asus/m4a785t_m/acpi/sata.asl | 149 ++ src/mainboard/asus/m4a785t_m/acpi/usb.asl | 161 ++ src/mainboard/asus/m4a785t_m/acpi_tables.c | 21 + src/mainboard/asus/m4a785t_m/board_info.txt | 6 + src/mainboard/asus/m4a785t_m/cmos.default | 18 + src/mainboard/asus/m4a785t_m/cmos.layout | 96 + src/mainboard/asus/m4a785t_m/devicetree.cb | 108 ++ src/mainboard/asus/m4a785t_m/dsdt.asl | 1773 +++++++++++++++++++ src/mainboard/asus/m4a785t_m/get_bus_conf.c | 21 + src/mainboard/asus/m4a785t_m/irq_tables.c | 21 + src/mainboard/asus/m4a785t_m/mainboard.c | 21 + src/mainboard/asus/m4a785t_m/mptable.c | 21 + src/mainboard/asus/m4a785t_m/romstage.c | 21 + src/mainboard/asus/m4a78_em/Kconfig | 75 + src/mainboard/asus/m4a78_em/acpi/cpstate.asl | 75 + src/mainboard/asus/m4a78_em/acpi/ide.asl | 244 +++ src/mainboard/asus/m4a78_em/acpi/routing.asl | 300 ++++ src/mainboard/asus/m4a78_em/acpi/sata.asl | 149 ++ src/mainboard/asus/m4a78_em/acpi/usb.asl | 161 ++ src/mainboard/asus/m4a78_em/acpi_tables.c | 221 +++ src/mainboard/asus/m4a78_em/board_info.txt | 6 + src/mainboard/asus/m4a78_em/cmos.layout | 96 + src/mainboard/asus/m4a78_em/devicetree.cb | 106 ++ src/mainboard/asus/m4a78_em/dsdt.asl | 1850 +++++++++++++++++++ src/mainboard/asus/m4a78_em/get_bus_conf.c | 116 ++ src/mainboard/asus/m4a78_em/irq_tables.c | 64 + src/mainboard/asus/m4a78_em/mainboard.c | 132 ++ src/mainboard/asus/m4a78_em/mb_sysconf.h | 43 + src/mainboard/asus/m4a78_em/mptable.c | 114 ++ src/mainboard/asus/m4a78_em/resourcemap.c | 280 +++ src/mainboard/asus/m4a78_em/romstage.c | 256 +++ src/mainboard/asus/m5a88-v/Kconfig | 90 - src/mainboard/asus/m5a88-v/Makefile.inc | 15 - src/mainboard/asus/m5a88-v/acpi/cpstate.asl | 75 - src/mainboard/asus/m5a88-v/acpi/ide.asl | 244 --- src/mainboard/asus/m5a88-v/acpi/routing.asl | 398 ----- src/mainboard/asus/m5a88-v/acpi/sata.asl | 149 -- src/mainboard/asus/m5a88-v/acpi/usb.asl | 161 -- src/mainboard/asus/m5a88-v/acpi_tables.c | 228 --- src/mainboard/asus/m5a88-v/board_info.txt | 6 - src/mainboard/asus/m5a88-v/cmos.layout | 96 - src/mainboard/asus/m5a88-v/devicetree.cb | 124 -- src/mainboard/asus/m5a88-v/dsdt.asl | 1824 ------------------- src/mainboard/asus/m5a88-v/get_bus_conf.c | 141 -- src/mainboard/asus/m5a88-v/irq_tables.c | 111 -- src/mainboard/asus/m5a88-v/mainboard.c | 87 - src/mainboard/asus/m5a88-v/mb_sysconf.h | 42 - src/mainboard/asus/m5a88-v/mptable.c | 91 - src/mainboard/asus/m5a88-v/platform_cfg.h | 219 --- src/mainboard/asus/m5a88-v/resourcemap.c | 278 --- src/mainboard/asus/m5a88-v/romstage.c | 250 --- src/mainboard/asus/m5a88_v/Kconfig | 90 + src/mainboard/asus/m5a88_v/Makefile.inc | 15 + src/mainboard/asus/m5a88_v/acpi/cpstate.asl | 75 + src/mainboard/asus/m5a88_v/acpi/ide.asl | 244 +++ src/mainboard/asus/m5a88_v/acpi/routing.asl | 398 +++++ src/mainboard/asus/m5a88_v/acpi/sata.asl | 149 ++ src/mainboard/asus/m5a88_v/acpi/usb.asl | 161 ++ src/mainboard/asus/m5a88_v/acpi_tables.c | 228 +++ src/mainboard/asus/m5a88_v/board_info.txt | 6 + src/mainboard/asus/m5a88_v/cmos.layout | 96 + src/mainboard/asus/m5a88_v/devicetree.cb | 124 ++ src/mainboard/asus/m5a88_v/dsdt.asl | 1824 +++++++++++++++++++ src/mainboard/asus/m5a88_v/get_bus_conf.c | 141 ++ src/mainboard/asus/m5a88_v/irq_tables.c | 111 ++ src/mainboard/asus/m5a88_v/mainboard.c | 87 + src/mainboard/asus/m5a88_v/mb_sysconf.h | 42 + src/mainboard/asus/m5a88_v/mptable.c | 91 + src/mainboard/asus/m5a88_v/platform_cfg.h | 219 +++ src/mainboard/asus/m5a88_v/resourcemap.c | 278 +++ src/mainboard/asus/m5a88_v/romstage.c | 250 +++ src/mainboard/asus/mew-am/Kconfig | 43 - src/mainboard/asus/mew-am/board_info.txt | 5 - src/mainboard/asus/mew-am/devicetree.cb | 60 - src/mainboard/asus/mew-am/irq_tables.c | 51 - src/mainboard/asus/mew-am/romstage.c | 48 - src/mainboard/asus/mew-vm/Kconfig | 44 - src/mainboard/asus/mew-vm/board_info.txt | 5 - src/mainboard/asus/mew-vm/cmos.layout | 72 - src/mainboard/asus/mew-vm/devicetree.cb | 52 - src/mainboard/asus/mew-vm/irq_tables.c | 42 - src/mainboard/asus/mew-vm/romstage.c | 48 - src/mainboard/asus/mew_am/Kconfig | 43 + src/mainboard/asus/mew_am/board_info.txt | 5 + src/mainboard/asus/mew_am/devicetree.cb | 60 + src/mainboard/asus/mew_am/irq_tables.c | 51 + src/mainboard/asus/mew_am/romstage.c | 48 + src/mainboard/asus/mew_vm/Kconfig | 44 + src/mainboard/asus/mew_vm/board_info.txt | 5 + src/mainboard/asus/mew_vm/cmos.layout | 72 + src/mainboard/asus/mew_vm/devicetree.cb | 52 + src/mainboard/asus/mew_vm/irq_tables.c | 42 + src/mainboard/asus/mew_vm/romstage.c | 48 + src/mainboard/asus/p2b-d/Kconfig | 51 - src/mainboard/asus/p2b-d/board_info.txt | 6 - src/mainboard/asus/p2b-d/devicetree.cb | 62 - src/mainboard/asus/p2b-d/irq_tables.c | 49 - src/mainboard/asus/p2b-d/mptable.c | 63 - src/mainboard/asus/p2b-d/romstage.c | 56 - src/mainboard/asus/p2b-ds/Kconfig | 51 - src/mainboard/asus/p2b-ds/board_info.txt | 6 - src/mainboard/asus/p2b-ds/devicetree.cb | 63 - src/mainboard/asus/p2b-ds/irq_tables.c | 50 - src/mainboard/asus/p2b-ds/mptable.c | 64 - src/mainboard/asus/p2b-ds/romstage.c | 56 - src/mainboard/asus/p2b-f/Kconfig | 43 - src/mainboard/asus/p2b-f/board_info.txt | 6 - src/mainboard/asus/p2b-f/devicetree.cb | 59 - src/mainboard/asus/p2b-f/irq_tables.c | 50 - src/mainboard/asus/p2b-f/romstage.c | 58 - src/mainboard/asus/p2b-ls/Kconfig | 44 - src/mainboard/asus/p2b-ls/board_info.txt | 6 - src/mainboard/asus/p2b-ls/devicetree.cb | 59 - src/mainboard/asus/p2b-ls/irq_tables.c | 54 - src/mainboard/asus/p2b-ls/romstage.c | 57 - src/mainboard/asus/p2b_d/Kconfig | 51 + src/mainboard/asus/p2b_d/board_info.txt | 6 + src/mainboard/asus/p2b_d/devicetree.cb | 62 + src/mainboard/asus/p2b_d/irq_tables.c | 49 + src/mainboard/asus/p2b_d/mptable.c | 63 + src/mainboard/asus/p2b_d/romstage.c | 56 + src/mainboard/asus/p2b_ds/Kconfig | 51 + src/mainboard/asus/p2b_ds/board_info.txt | 6 + src/mainboard/asus/p2b_ds/devicetree.cb | 63 + src/mainboard/asus/p2b_ds/irq_tables.c | 50 + src/mainboard/asus/p2b_ds/mptable.c | 64 + src/mainboard/asus/p2b_ds/romstage.c | 56 + src/mainboard/asus/p2b_f/Kconfig | 43 + src/mainboard/asus/p2b_f/board_info.txt | 6 + src/mainboard/asus/p2b_f/devicetree.cb | 59 + src/mainboard/asus/p2b_f/irq_tables.c | 50 + src/mainboard/asus/p2b_f/romstage.c | 58 + src/mainboard/asus/p2b_ls/Kconfig | 44 + src/mainboard/asus/p2b_ls/board_info.txt | 6 + src/mainboard/asus/p2b_ls/devicetree.cb | 59 + src/mainboard/asus/p2b_ls/irq_tables.c | 54 + src/mainboard/asus/p2b_ls/romstage.c | 57 + src/mainboard/asus/p3b-f/Kconfig | 44 - src/mainboard/asus/p3b-f/board_info.txt | 6 - src/mainboard/asus/p3b-f/devicetree.cb | 59 - src/mainboard/asus/p3b-f/irq_tables.c | 51 - src/mainboard/asus/p3b-f/romstage.c | 95 - src/mainboard/asus/p3b_f/Kconfig | 44 + src/mainboard/asus/p3b_f/board_info.txt | 6 + src/mainboard/asus/p3b_f/devicetree.cb | 59 + src/mainboard/asus/p3b_f/irq_tables.c | 51 + src/mainboard/asus/p3b_f/romstage.c | 95 + src/mainboard/avalue/Kconfig | 2 +- src/mainboard/avalue/eax-785e/Kconfig | 92 - src/mainboard/avalue/eax-785e/Makefile.inc | 15 - src/mainboard/avalue/eax-785e/acpi/cpstate.asl | 75 - src/mainboard/avalue/eax-785e/acpi/routing.asl | 398 ----- src/mainboard/avalue/eax-785e/acpi/sata.asl | 149 -- src/mainboard/avalue/eax-785e/acpi/usb.asl | 161 -- src/mainboard/avalue/eax-785e/acpi_tables.c | 228 --- src/mainboard/avalue/eax-785e/board_info.txt | 5 - src/mainboard/avalue/eax-785e/cmos.layout | 96 - src/mainboard/avalue/eax-785e/devicetree.cb | 111 -- src/mainboard/avalue/eax-785e/dsdt.asl | 1818 ------------------- src/mainboard/avalue/eax-785e/get_bus_conf.c | 141 -- src/mainboard/avalue/eax-785e/irq_tables.c | 111 -- src/mainboard/avalue/eax-785e/mainboard.c | 86 - src/mainboard/avalue/eax-785e/mb_sysconf.h | 42 - src/mainboard/avalue/eax-785e/mptable.c | 94 - src/mainboard/avalue/eax-785e/platform_cfg.h | 219 --- src/mainboard/avalue/eax-785e/resourcemap.c | 278 --- src/mainboard/avalue/eax-785e/romstage.c | 254 --- src/mainboard/avalue/eax_785e/Kconfig | 92 + src/mainboard/avalue/eax_785e/Makefile.inc | 15 + src/mainboard/avalue/eax_785e/acpi/cpstate.asl | 75 + src/mainboard/avalue/eax_785e/acpi/routing.asl | 398 +++++ src/mainboard/avalue/eax_785e/acpi/sata.asl | 149 ++ src/mainboard/avalue/eax_785e/acpi/usb.asl | 161 ++ src/mainboard/avalue/eax_785e/acpi_tables.c | 228 +++ src/mainboard/avalue/eax_785e/board_info.txt | 5 + src/mainboard/avalue/eax_785e/cmos.layout | 96 + src/mainboard/avalue/eax_785e/devicetree.cb | 111 ++ src/mainboard/avalue/eax_785e/dsdt.asl | 1818 +++++++++++++++++++ src/mainboard/avalue/eax_785e/get_bus_conf.c | 141 ++ src/mainboard/avalue/eax_785e/irq_tables.c | 111 ++ src/mainboard/avalue/eax_785e/mainboard.c | 86 + src/mainboard/avalue/eax_785e/mb_sysconf.h | 42 + src/mainboard/avalue/eax_785e/mptable.c | 94 + src/mainboard/avalue/eax_785e/platform_cfg.h | 219 +++ src/mainboard/avalue/eax_785e/resourcemap.c | 278 +++ src/mainboard/avalue/eax_785e/romstage.c | 254 +++ src/mainboard/azza/Kconfig | 2 +- src/mainboard/azza/pt-6ibd/Kconfig | 43 - src/mainboard/azza/pt-6ibd/board_info.txt | 4 - src/mainboard/azza/pt-6ibd/devicetree.cb | 59 - src/mainboard/azza/pt-6ibd/irq_tables.c | 50 - src/mainboard/azza/pt-6ibd/romstage.c | 58 - src/mainboard/azza/pt_6ibd/Kconfig | 43 + src/mainboard/azza/pt_6ibd/board_info.txt | 4 + src/mainboard/azza/pt_6ibd/devicetree.cb | 59 + src/mainboard/azza/pt_6ibd/irq_tables.c | 50 + src/mainboard/azza/pt_6ibd/romstage.c | 58 + src/mainboard/bcom/Kconfig | 4 +- src/mainboard/bcom/winnet_p680/Kconfig | 26 + src/mainboard/bcom/winnet_p680/board_info.txt | 1 + src/mainboard/bcom/winnet_p680/cmos.layout | 72 + src/mainboard/bcom/winnet_p680/devicetree.cb | 64 + src/mainboard/bcom/winnet_p680/irq_tables.c | 54 + src/mainboard/bcom/winnet_p680/romstage.c | 103 ++ src/mainboard/bcom/winnetp680/Kconfig | 26 - src/mainboard/bcom/winnetp680/board_info.txt | 1 - src/mainboard/bcom/winnetp680/cmos.layout | 72 - src/mainboard/bcom/winnetp680/devicetree.cb | 64 - src/mainboard/bcom/winnetp680/irq_tables.c | 54 - src/mainboard/bcom/winnetp680/romstage.c | 103 -- src/mainboard/cubietech/Kconfig | 4 +- src/mainboard/cubietech/cubieboard/Kconfig | 33 - src/mainboard/cubietech/cubieboard/Makefile.inc | 1 - src/mainboard/cubietech/cubieboard/board_info.txt | 2 - src/mainboard/cubietech/cubieboard/bootblock.c | 142 -- src/mainboard/cubietech/cubieboard/devicetree.cb | 12 - src/mainboard/cubietech/cubieboard/romstage.c | 94 - src/mainboard/cubietech/cubieboard_a10/Kconfig | 33 + .../cubietech/cubieboard_a10/Makefile.inc | 1 + .../cubietech/cubieboard_a10/board_info.txt | 2 + src/mainboard/cubietech/cubieboard_a10/bootblock.c | 142 ++ .../cubietech/cubieboard_a10/devicetree.cb | 12 + src/mainboard/cubietech/cubieboard_a10/romstage.c | 94 + src/mainboard/digital_logic/Kconfig | 4 +- src/mainboard/digital_logic/adl855pc/Kconfig | 33 - .../digital_logic/adl855pc/board_info.txt | 1 - src/mainboard/digital_logic/adl855pc/cmos.layout | 72 - src/mainboard/digital_logic/adl855pc/devicetree.cb | 56 - src/mainboard/digital_logic/adl855pc/irq_tables.c | 36 - src/mainboard/digital_logic/adl855pc/romstage.c | 64 - src/mainboard/digital_logic/smartmodule855/Kconfig | 33 + .../digital_logic/smartmodule855/board_info.txt | 1 + .../digital_logic/smartmodule855/cmos.layout | 72 + .../digital_logic/smartmodule855/devicetree.cb | 56 + .../digital_logic/smartmodule855/irq_tables.c | 36 + .../digital_logic/smartmodule855/romstage.c | 64 + src/mainboard/ecs/Kconfig | 2 +- src/mainboard/ecs/p6iwp-fe/Kconfig | 44 - src/mainboard/ecs/p6iwp-fe/board_info.txt | 6 - src/mainboard/ecs/p6iwp-fe/devicetree.cb | 86 - src/mainboard/ecs/p6iwp-fe/irq_tables.c | 56 - src/mainboard/ecs/p6iwp-fe/romstage.c | 53 - src/mainboard/ecs/p6iwp_fe/Kconfig | 44 + src/mainboard/ecs/p6iwp_fe/board_info.txt | 6 + src/mainboard/ecs/p6iwp_fe/devicetree.cb | 86 + src/mainboard/ecs/p6iwp_fe/irq_tables.c | 56 + src/mainboard/ecs/p6iwp_fe/romstage.c | 53 + src/mainboard/emulation/Kconfig | 6 +- src/mainboard/emulation/qemu-armv7/Kconfig | 101 -- src/mainboard/emulation/qemu-armv7/Makefile.inc | 27 - src/mainboard/emulation/qemu-armv7/board_info.txt | 3 - src/mainboard/emulation/qemu-armv7/devicetree.cb | 20 - src/mainboard/emulation/qemu-armv7/mainboard.c | 26 - src/mainboard/emulation/qemu-armv7/media.c | 65 - src/mainboard/emulation/qemu-armv7/mmio.c | 21 - src/mainboard/emulation/qemu-armv7/romstage.c | 29 - src/mainboard/emulation/qemu-armv7/timer.c | 24 - src/mainboard/emulation/qemu-i440fx/Kconfig | 36 - src/mainboard/emulation/qemu-i440fx/Makefile.inc | 3 - .../emulation/qemu-i440fx/acpi/cpu-hotplug.asl | 78 - src/mainboard/emulation/qemu-i440fx/acpi/dbug.asl | 26 - src/mainboard/emulation/qemu-i440fx/acpi/hpet.asl | 36 - src/mainboard/emulation/qemu-i440fx/acpi/isa.asl | 102 -- .../emulation/qemu-i440fx/acpi/pci-crs.asl | 94 - src/mainboard/emulation/qemu-i440fx/acpi_tables.c | 195 -- src/mainboard/emulation/qemu-i440fx/board_info.txt | 2 - .../emulation/qemu-i440fx/cache_as_ram.inc | 73 - src/mainboard/emulation/qemu-i440fx/cmos.layout | 72 - src/mainboard/emulation/qemu-i440fx/devicetree.cb | 18 - src/mainboard/emulation/qemu-i440fx/dsdt.asl | 347 ---- src/mainboard/emulation/qemu-i440fx/fw_cfg.c | 393 ---- src/mainboard/emulation/qemu-i440fx/fw_cfg.h | 22 - src/mainboard/emulation/qemu-i440fx/fw_cfg_if.h | 76 - src/mainboard/emulation/qemu-i440fx/irq_tables.c | 35 - src/mainboard/emulation/qemu-i440fx/mainboard.c | 65 - src/mainboard/emulation/qemu-i440fx/memory.c | 46 - src/mainboard/emulation/qemu-i440fx/northbridge.c | 296 ---- src/mainboard/emulation/qemu-i440fx/romstage.c | 57 - src/mainboard/emulation/qemu-q35/Kconfig | 47 - src/mainboard/emulation/qemu-q35/Makefile.inc | 3 - src/mainboard/emulation/qemu-q35/acpi_tables.c | 345 ---- src/mainboard/emulation/qemu-q35/board_info.txt | 2 - src/mainboard/emulation/qemu-q35/bootblock.c | 33 - src/mainboard/emulation/qemu-q35/devicetree.cb | 39 - src/mainboard/emulation/qemu-q35/dsdt.asl | 454 ----- src/mainboard/emulation/qemu-q35/hda_verb.c | 7 - src/mainboard/emulation/qemu-q35/mainboard.c | 85 - src/mainboard/emulation/qemu-q35/romstage.c | 59 - src/mainboard/emulation/qemu_armv7/Kconfig | 101 ++ src/mainboard/emulation/qemu_armv7/Makefile.inc | 27 + src/mainboard/emulation/qemu_armv7/board_info.txt | 3 + src/mainboard/emulation/qemu_armv7/devicetree.cb | 20 + src/mainboard/emulation/qemu_armv7/mainboard.c | 26 + src/mainboard/emulation/qemu_armv7/media.c | 65 + src/mainboard/emulation/qemu_armv7/mmio.c | 21 + src/mainboard/emulation/qemu_armv7/romstage.c | 29 + src/mainboard/emulation/qemu_armv7/timer.c | 24 + .../emulation/qemu_x86_i440fx_piix4/Kconfig | 36 + .../emulation/qemu_x86_i440fx_piix4/Makefile.inc | 3 + .../qemu_x86_i440fx_piix4/acpi/cpu-hotplug.asl | 78 + .../emulation/qemu_x86_i440fx_piix4/acpi/dbug.asl | 26 + .../emulation/qemu_x86_i440fx_piix4/acpi/hpet.asl | 36 + .../emulation/qemu_x86_i440fx_piix4/acpi/isa.asl | 102 ++ .../qemu_x86_i440fx_piix4/acpi/pci-crs.asl | 94 + .../emulation/qemu_x86_i440fx_piix4/acpi_tables.c | 195 ++ .../emulation/qemu_x86_i440fx_piix4/board_info.txt | 2 + .../qemu_x86_i440fx_piix4/cache_as_ram.inc | 73 + .../emulation/qemu_x86_i440fx_piix4/cmos.layout | 72 + .../emulation/qemu_x86_i440fx_piix4/devicetree.cb | 18 + .../emulation/qemu_x86_i440fx_piix4/dsdt.asl | 347 ++++ .../emulation/qemu_x86_i440fx_piix4/fw_cfg.c | 393 ++++ .../emulation/qemu_x86_i440fx_piix4/fw_cfg.h | 22 + .../emulation/qemu_x86_i440fx_piix4/fw_cfg_if.h | 76 + .../emulation/qemu_x86_i440fx_piix4/irq_tables.c | 35 + .../emulation/qemu_x86_i440fx_piix4/mainboard.c | 65 + .../emulation/qemu_x86_i440fx_piix4/memory.c | 46 + .../emulation/qemu_x86_i440fx_piix4/northbridge.c | 296 ++++ .../emulation/qemu_x86_i440fx_piix4/romstage.c | 57 + src/mainboard/emulation/qemu_x86_q35_ich9/Kconfig | 47 + .../emulation/qemu_x86_q35_ich9/Makefile.inc | 3 + .../emulation/qemu_x86_q35_ich9/acpi_tables.c | 345 ++++ .../emulation/qemu_x86_q35_ich9/board_info.txt | 2 + .../emulation/qemu_x86_q35_ich9/bootblock.c | 33 + .../emulation/qemu_x86_q35_ich9/devicetree.cb | 39 + src/mainboard/emulation/qemu_x86_q35_ich9/dsdt.asl | 454 +++++ .../emulation/qemu_x86_q35_ich9/hda_verb.c | 7 + .../emulation/qemu_x86_q35_ich9/mainboard.c | 85 + .../emulation/qemu_x86_q35_ich9/romstage.c | 59 + src/mainboard/gigabyte/Kconfig | 20 +- src/mainboard/gigabyte/ga-6bxc/Kconfig | 43 - src/mainboard/gigabyte/ga-6bxc/board_info.txt | 6 - src/mainboard/gigabyte/ga-6bxc/devicetree.cb | 57 - src/mainboard/gigabyte/ga-6bxc/irq_tables.c | 49 - src/mainboard/gigabyte/ga-6bxc/romstage.c | 55 - src/mainboard/gigabyte/ga-6bxe/Kconfig | 45 - src/mainboard/gigabyte/ga-6bxe/board_info.txt | 6 - src/mainboard/gigabyte/ga-6bxe/devicetree.cb | 57 - src/mainboard/gigabyte/ga-6bxe/irq_tables.c | 53 - src/mainboard/gigabyte/ga-6bxe/romstage.c | 56 - src/mainboard/gigabyte/ga_6bxc/Kconfig | 43 + src/mainboard/gigabyte/ga_6bxc/board_info.txt | 6 + src/mainboard/gigabyte/ga_6bxc/devicetree.cb | 57 + src/mainboard/gigabyte/ga_6bxc/irq_tables.c | 49 + src/mainboard/gigabyte/ga_6bxc/romstage.c | 55 + src/mainboard/gigabyte/ga_6bxe/Kconfig | 45 + src/mainboard/gigabyte/ga_6bxe/board_info.txt | 6 + src/mainboard/gigabyte/ga_6bxe/devicetree.cb | 57 + src/mainboard/gigabyte/ga_6bxe/irq_tables.c | 53 + src/mainboard/gigabyte/ga_6bxe/romstage.c | 56 + src/mainboard/gigabyte/ga_m57sli_s4/Kconfig | 80 + src/mainboard/gigabyte/ga_m57sli_s4/Makefile.inc | 20 + src/mainboard/gigabyte/ga_m57sli_s4/acpi_tables.c | 86 + src/mainboard/gigabyte/ga_m57sli_s4/board_info.txt | 6 + src/mainboard/gigabyte/ga_m57sli_s4/cmos.layout | 117 ++ src/mainboard/gigabyte/ga_m57sli_s4/devicetree.cb | 154 ++ src/mainboard/gigabyte/ga_m57sli_s4/dsdt.asl | 304 ++++ src/mainboard/gigabyte/ga_m57sli_s4/fanctl.c | 81 + src/mainboard/gigabyte/ga_m57sli_s4/get_bus_conf.c | 127 ++ src/mainboard/gigabyte/ga_m57sli_s4/irq_tables.c | 118 ++ src/mainboard/gigabyte/ga_m57sli_s4/mainboard.c | 35 + src/mainboard/gigabyte/ga_m57sli_s4/mptable.c | 125 ++ src/mainboard/gigabyte/ga_m57sli_s4/resourcemap.c | 282 +++ src/mainboard/gigabyte/ga_m57sli_s4/romstage.c | 208 +++ src/mainboard/gigabyte/ga_ma785gm_us2h/Kconfig | 76 + .../gigabyte/ga_ma785gm_us2h/acpi/cpstate.asl | 75 + .../gigabyte/ga_ma785gm_us2h/acpi/ide.asl | 244 +++ .../gigabyte/ga_ma785gm_us2h/acpi/routing.asl | 300 ++++ .../gigabyte/ga_ma785gm_us2h/acpi/sata.asl | 149 ++ .../gigabyte/ga_ma785gm_us2h/acpi/usb.asl | 161 ++ .../gigabyte/ga_ma785gm_us2h/acpi_tables.c | 222 +++ .../gigabyte/ga_ma785gm_us2h/board_info.txt | 2 + src/mainboard/gigabyte/ga_ma785gm_us2h/cmos.layout | 96 + .../gigabyte/ga_ma785gm_us2h/devicetree.cb | 115 ++ src/mainboard/gigabyte/ga_ma785gm_us2h/dsdt.asl | 1850 +++++++++++++++++++ .../gigabyte/ga_ma785gm_us2h/get_bus_conf.c | 116 ++ .../gigabyte/ga_ma785gm_us2h/irq_tables.c | 112 ++ src/mainboard/gigabyte/ga_ma785gm_us2h/mainboard.c | 148 ++ .../gigabyte/ga_ma785gm_us2h/mb_sysconf.h | 43 + src/mainboard/gigabyte/ga_ma785gm_us2h/mptable.c | 114 ++ .../gigabyte/ga_ma785gm_us2h/resourcemap.c | 280 +++ src/mainboard/gigabyte/ga_ma785gm_us2h/romstage.c | 251 +++ src/mainboard/gigabyte/ga_ma785gmt_ud2h/Kconfig | 76 + .../gigabyte/ga_ma785gmt_ud2h/acpi/cpstate.asl | 75 + .../gigabyte/ga_ma785gmt_ud2h/acpi/ide.asl | 244 +++ .../gigabyte/ga_ma785gmt_ud2h/acpi/routing.asl | 300 ++++ .../gigabyte/ga_ma785gmt_ud2h/acpi/sata.asl | 149 ++ .../gigabyte/ga_ma785gmt_ud2h/acpi/usb.asl | 161 ++ .../gigabyte/ga_ma785gmt_ud2h/acpi_tables.c | 220 +++ .../gigabyte/ga_ma785gmt_ud2h/board_info.txt | 2 + .../gigabyte/ga_ma785gmt_ud2h/cmos.layout | 96 + .../gigabyte/ga_ma785gmt_ud2h/devicetree.cb | 115 ++ src/mainboard/gigabyte/ga_ma785gmt_ud2h/dsdt.asl | 1850 +++++++++++++++++++ .../gigabyte/ga_ma785gmt_ud2h/get_bus_conf.c | 116 ++ .../gigabyte/ga_ma785gmt_ud2h/irq_tables.c | 112 ++ .../gigabyte/ga_ma785gmt_ud2h/mainboard.c | 259 +++ src/mainboard/gigabyte/ga_ma785gmt_ud2h/mptable.c | 114 ++ .../gigabyte/ga_ma785gmt_ud2h/resourcemap.c | 280 +++ src/mainboard/gigabyte/ga_ma785gmt_ud2h/romstage.c | 251 +++ src/mainboard/gigabyte/ga_ma78gm_us2h/Kconfig | 76 + .../gigabyte/ga_ma78gm_us2h/acpi/cpstate.asl | 75 + src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/ide.asl | 244 +++ .../gigabyte/ga_ma78gm_us2h/acpi/routing.asl | 311 ++++ .../gigabyte/ga_ma78gm_us2h/acpi/sata.asl | 149 ++ src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/usb.asl | 161 ++ .../gigabyte/ga_ma78gm_us2h/acpi_tables.c | 220 +++ .../gigabyte/ga_ma78gm_us2h/board_info.txt | 2 + src/mainboard/gigabyte/ga_ma78gm_us2h/cmos.layout | 96 + .../gigabyte/ga_ma78gm_us2h/devicetree.cb | 115 ++ src/mainboard/gigabyte/ga_ma78gm_us2h/dsdt.asl | 1850 +++++++++++++++++++ .../gigabyte/ga_ma78gm_us2h/get_bus_conf.c | 116 ++ src/mainboard/gigabyte/ga_ma78gm_us2h/irq_tables.c | 112 ++ src/mainboard/gigabyte/ga_ma78gm_us2h/mainboard.c | 84 + src/mainboard/gigabyte/ga_ma78gm_us2h/mptable.c | 114 ++ .../gigabyte/ga_ma78gm_us2h/resourcemap.c | 280 +++ src/mainboard/gigabyte/ga_ma78gm_us2h/romstage.c | 254 +++ src/mainboard/gigabyte/m57sli/Kconfig | 80 - src/mainboard/gigabyte/m57sli/Makefile.inc | 20 - src/mainboard/gigabyte/m57sli/acpi_tables.c | 86 - src/mainboard/gigabyte/m57sli/board_info.txt | 6 - src/mainboard/gigabyte/m57sli/cmos.layout | 117 -- src/mainboard/gigabyte/m57sli/devicetree.cb | 154 -- src/mainboard/gigabyte/m57sli/dsdt.asl | 304 ---- src/mainboard/gigabyte/m57sli/fanctl.c | 81 - src/mainboard/gigabyte/m57sli/get_bus_conf.c | 127 -- src/mainboard/gigabyte/m57sli/irq_tables.c | 118 -- src/mainboard/gigabyte/m57sli/mainboard.c | 35 - src/mainboard/gigabyte/m57sli/mptable.c | 125 -- src/mainboard/gigabyte/m57sli/resourcemap.c | 282 --- src/mainboard/gigabyte/m57sli/romstage.c | 208 --- src/mainboard/gigabyte/ma785gm/Kconfig | 76 - src/mainboard/gigabyte/ma785gm/acpi/cpstate.asl | 75 - src/mainboard/gigabyte/ma785gm/acpi/ide.asl | 244 --- src/mainboard/gigabyte/ma785gm/acpi/routing.asl | 300 ---- src/mainboard/gigabyte/ma785gm/acpi/sata.asl | 149 -- src/mainboard/gigabyte/ma785gm/acpi/usb.asl | 161 -- src/mainboard/gigabyte/ma785gm/acpi_tables.c | 222 --- src/mainboard/gigabyte/ma785gm/board_info.txt | 2 - src/mainboard/gigabyte/ma785gm/cmos.layout | 96 - src/mainboard/gigabyte/ma785gm/devicetree.cb | 115 -- src/mainboard/gigabyte/ma785gm/dsdt.asl | 1850 ------------------- src/mainboard/gigabyte/ma785gm/get_bus_conf.c | 116 -- src/mainboard/gigabyte/ma785gm/irq_tables.c | 112 -- src/mainboard/gigabyte/ma785gm/mainboard.c | 148 -- src/mainboard/gigabyte/ma785gm/mb_sysconf.h | 43 - src/mainboard/gigabyte/ma785gm/mptable.c | 114 -- src/mainboard/gigabyte/ma785gm/resourcemap.c | 280 --- src/mainboard/gigabyte/ma785gm/romstage.c | 251 --- src/mainboard/gigabyte/ma785gmt/Kconfig | 76 - src/mainboard/gigabyte/ma785gmt/acpi/cpstate.asl | 75 - src/mainboard/gigabyte/ma785gmt/acpi/ide.asl | 244 --- src/mainboard/gigabyte/ma785gmt/acpi/routing.asl | 300 ---- src/mainboard/gigabyte/ma785gmt/acpi/sata.asl | 149 -- src/mainboard/gigabyte/ma785gmt/acpi/usb.asl | 161 -- src/mainboard/gigabyte/ma785gmt/acpi_tables.c | 220 --- src/mainboard/gigabyte/ma785gmt/board_info.txt | 2 - src/mainboard/gigabyte/ma785gmt/cmos.layout | 96 - src/mainboard/gigabyte/ma785gmt/devicetree.cb | 115 -- src/mainboard/gigabyte/ma785gmt/dsdt.asl | 1850 ------------------- src/mainboard/gigabyte/ma785gmt/get_bus_conf.c | 116 -- src/mainboard/gigabyte/ma785gmt/irq_tables.c | 112 -- src/mainboard/gigabyte/ma785gmt/mainboard.c | 259 --- src/mainboard/gigabyte/ma785gmt/mptable.c | 114 -- src/mainboard/gigabyte/ma785gmt/resourcemap.c | 280 --- src/mainboard/gigabyte/ma785gmt/romstage.c | 251 --- src/mainboard/gigabyte/ma78gm/Kconfig | 76 - src/mainboard/gigabyte/ma78gm/acpi/cpstate.asl | 75 - src/mainboard/gigabyte/ma78gm/acpi/ide.asl | 244 --- src/mainboard/gigabyte/ma78gm/acpi/routing.asl | 311 ---- src/mainboard/gigabyte/ma78gm/acpi/sata.asl | 149 -- src/mainboard/gigabyte/ma78gm/acpi/usb.asl | 161 -- src/mainboard/gigabyte/ma78gm/acpi_tables.c | 220 --- src/mainboard/gigabyte/ma78gm/board_info.txt | 2 - src/mainboard/gigabyte/ma78gm/cmos.layout | 96 - src/mainboard/gigabyte/ma78gm/devicetree.cb | 115 -- src/mainboard/gigabyte/ma78gm/dsdt.asl | 1850 ------------------- src/mainboard/gigabyte/ma78gm/get_bus_conf.c | 116 -- src/mainboard/gigabyte/ma78gm/irq_tables.c | 112 -- src/mainboard/gigabyte/ma78gm/mainboard.c | 84 - src/mainboard/gigabyte/ma78gm/mptable.c | 114 -- src/mainboard/gigabyte/ma78gm/resourcemap.c | 280 --- src/mainboard/gigabyte/ma78gm/romstage.c | 254 --- src/mainboard/hp/Kconfig | 12 +- src/mainboard/hp/dl145_g1/Kconfig | 59 - src/mainboard/hp/dl145_g1/acpi/amd8111.asl | 617 ------- src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl | 155 -- src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl | 231 --- src/mainboard/hp/dl145_g1/acpi/amd8131.asl | 101 -- src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl | 6 - src/mainboard/hp/dl145_g1/acpi_tables.c | 130 -- src/mainboard/hp/dl145_g1/board_info.txt | 6 - src/mainboard/hp/dl145_g1/cmos.layout | 96 - src/mainboard/hp/dl145_g1/devicetree.cb | 142 -- src/mainboard/hp/dl145_g1/dsdt.asl | 314 ---- src/mainboard/hp/dl145_g1/fadt.c | 183 -- src/mainboard/hp/dl145_g1/get_bus_conf.c | 115 -- src/mainboard/hp/dl145_g1/irq_tables.c | 98 - src/mainboard/hp/dl145_g1/mb_sysconf.h | 23 - src/mainboard/hp/dl145_g1/mptable.c | 94 - src/mainboard/hp/dl145_g1/resourcemap.c | 268 --- src/mainboard/hp/dl145_g1/romstage.c | 201 --- src/mainboard/hp/dl145_g3/Kconfig | 67 - src/mainboard/hp/dl145_g3/board_info.txt | 2 - src/mainboard/hp/dl145_g3/cmos.layout | 96 - src/mainboard/hp/dl145_g3/devicetree.cb | 87 - src/mainboard/hp/dl145_g3/get_bus_conf.c | 137 -- src/mainboard/hp/dl145_g3/irq_tables.c | 58 - src/mainboard/hp/dl145_g3/mb_sysconf.h | 41 - src/mainboard/hp/dl145_g3/mptable.c | 190 -- src/mainboard/hp/dl145_g3/romstage.c | 213 --- src/mainboard/hp/dl165_g6_fam10/Kconfig | 87 - src/mainboard/hp/dl165_g6_fam10/board_info.txt | 2 - src/mainboard/hp/dl165_g6_fam10/bootblock.c | 54 - src/mainboard/hp/dl165_g6_fam10/cmos.layout | 96 - src/mainboard/hp/dl165_g6_fam10/devicetree.cb | 90 - src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c | 135 -- src/mainboard/hp/dl165_g6_fam10/irq_tables.c | 51 - src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h | 41 - src/mainboard/hp/dl165_g6_fam10/mptable.c | 168 -- src/mainboard/hp/dl165_g6_fam10/romstage.c | 247 --- src/mainboard/hp/proliant_dl145_g1/Kconfig | 59 + .../hp/proliant_dl145_g1/acpi/amd8111.asl | 617 +++++++ .../hp/proliant_dl145_g1/acpi/amd8111_isa.asl | 155 ++ .../hp/proliant_dl145_g1/acpi/amd8111_pic.asl | 231 +++ .../hp/proliant_dl145_g1/acpi/amd8131.asl | 101 ++ .../hp/proliant_dl145_g1/acpi/pci0_hc.asl | 6 + src/mainboard/hp/proliant_dl145_g1/acpi_tables.c | 130 ++ src/mainboard/hp/proliant_dl145_g1/board_info.txt | 6 + src/mainboard/hp/proliant_dl145_g1/cmos.layout | 96 + src/mainboard/hp/proliant_dl145_g1/devicetree.cb | 142 ++ src/mainboard/hp/proliant_dl145_g1/dsdt.asl | 314 ++++ src/mainboard/hp/proliant_dl145_g1/fadt.c | 183 ++ src/mainboard/hp/proliant_dl145_g1/get_bus_conf.c | 115 ++ src/mainboard/hp/proliant_dl145_g1/irq_tables.c | 98 + src/mainboard/hp/proliant_dl145_g1/mb_sysconf.h | 23 + src/mainboard/hp/proliant_dl145_g1/mptable.c | 94 + src/mainboard/hp/proliant_dl145_g1/resourcemap.c | 268 +++ src/mainboard/hp/proliant_dl145_g1/romstage.c | 201 +++ src/mainboard/hp/proliant_dl145_g3/Kconfig | 67 + src/mainboard/hp/proliant_dl145_g3/board_info.txt | 2 + src/mainboard/hp/proliant_dl145_g3/cmos.layout | 96 + src/mainboard/hp/proliant_dl145_g3/devicetree.cb | 87 + src/mainboard/hp/proliant_dl145_g3/get_bus_conf.c | 137 ++ src/mainboard/hp/proliant_dl145_g3/irq_tables.c | 58 + src/mainboard/hp/proliant_dl145_g3/mb_sysconf.h | 41 + src/mainboard/hp/proliant_dl145_g3/mptable.c | 190 ++ src/mainboard/hp/proliant_dl145_g3/romstage.c | 213 +++ src/mainboard/hp/proliant_dl165_g6_fam10/Kconfig | 87 + .../hp/proliant_dl165_g6_fam10/board_info.txt | 2 + .../hp/proliant_dl165_g6_fam10/bootblock.c | 54 + .../hp/proliant_dl165_g6_fam10/cmos.layout | 96 + .../hp/proliant_dl165_g6_fam10/devicetree.cb | 90 + .../hp/proliant_dl165_g6_fam10/get_bus_conf.c | 135 ++ .../hp/proliant_dl165_g6_fam10/irq_tables.c | 51 + .../hp/proliant_dl165_g6_fam10/mb_sysconf.h | 41 + src/mainboard/hp/proliant_dl165_g6_fam10/mptable.c | 168 ++ .../hp/proliant_dl165_g6_fam10/romstage.c | 247 +++ src/mainboard/ibm/Kconfig | 8 +- src/mainboard/ibm/e325/Kconfig | 62 - src/mainboard/ibm/e325/board_info.txt | 2 - src/mainboard/ibm/e325/cmos.layout | 96 - src/mainboard/ibm/e325/devicetree.cb | 70 - src/mainboard/ibm/e325/irq_tables.c | 60 - src/mainboard/ibm/e325/mptable.c | 131 -- src/mainboard/ibm/e325/resourcemap.c | 271 --- src/mainboard/ibm/e325/romstage.c | 119 -- src/mainboard/ibm/e326/Kconfig | 62 - src/mainboard/ibm/e326/board_info.txt | 2 - src/mainboard/ibm/e326/cmos.layout | 96 - src/mainboard/ibm/e326/devicetree.cb | 74 - src/mainboard/ibm/e326/irq_tables.c | 60 - src/mainboard/ibm/e326/mptable.c | 130 -- src/mainboard/ibm/e326/resourcemap.c | 271 --- src/mainboard/ibm/e326/romstage.c | 119 -- src/mainboard/ibm/eserver_325/Kconfig | 62 + src/mainboard/ibm/eserver_325/board_info.txt | 2 + src/mainboard/ibm/eserver_325/cmos.layout | 96 + src/mainboard/ibm/eserver_325/devicetree.cb | 70 + src/mainboard/ibm/eserver_325/irq_tables.c | 60 + src/mainboard/ibm/eserver_325/mptable.c | 131 ++ src/mainboard/ibm/eserver_325/resourcemap.c | 271 +++ src/mainboard/ibm/eserver_325/romstage.c | 119 ++ src/mainboard/ibm/eserver_326/Kconfig | 62 + src/mainboard/ibm/eserver_326/board_info.txt | 2 + src/mainboard/ibm/eserver_326/cmos.layout | 96 + src/mainboard/ibm/eserver_326/devicetree.cb | 74 + src/mainboard/ibm/eserver_326/irq_tables.c | 60 + src/mainboard/ibm/eserver_326/mptable.c | 130 ++ src/mainboard/ibm/eserver_326/resourcemap.c | 271 +++ src/mainboard/ibm/eserver_326/romstage.c | 119 ++ src/mainboard/iei/Kconfig | 14 +- src/mainboard/iei/juki-511p/Kconfig | 47 - src/mainboard/iei/juki-511p/board_info.txt | 2 - src/mainboard/iei/juki-511p/cmos.layout | 72 - src/mainboard/iei/juki-511p/devicetree.cb | 57 - src/mainboard/iei/juki-511p/irq_tables.c | 103 -- src/mainboard/iei/juki-511p/romstage.c | 48 - src/mainboard/iei/juki_511p/Kconfig | 47 + src/mainboard/iei/juki_511p/board_info.txt | 2 + src/mainboard/iei/juki_511p/cmos.layout | 72 + src/mainboard/iei/juki_511p/devicetree.cb | 57 + src/mainboard/iei/juki_511p/irq_tables.c | 103 ++ src/mainboard/iei/juki_511p/romstage.c | 48 + src/mainboard/iei/kino-780am2-fam10/Kconfig | 80 - .../iei/kino-780am2-fam10/acpi/cpstate.asl | 75 - src/mainboard/iei/kino-780am2-fam10/acpi/ide.asl | 244 --- .../iei/kino-780am2-fam10/acpi/routing.asl | 337 ---- src/mainboard/iei/kino-780am2-fam10/acpi/sata.asl | 149 -- src/mainboard/iei/kino-780am2-fam10/acpi/usb.asl | 161 -- src/mainboard/iei/kino-780am2-fam10/acpi_tables.c | 191 -- src/mainboard/iei/kino-780am2-fam10/board_info.txt | 4 - src/mainboard/iei/kino-780am2-fam10/cmos.layout | 96 - src/mainboard/iei/kino-780am2-fam10/devicetree.cb | 71 - src/mainboard/iei/kino-780am2-fam10/dsdt.asl | 1868 -------------------- src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c | 116 -- src/mainboard/iei/kino-780am2-fam10/irq_tables.c | 112 -- src/mainboard/iei/kino-780am2-fam10/mainboard.c | 66 - src/mainboard/iei/kino-780am2-fam10/mb_sysconf.h | 43 - src/mainboard/iei/kino-780am2-fam10/mptable.c | 114 -- src/mainboard/iei/kino-780am2-fam10/resourcemap.c | 280 --- src/mainboard/iei/kino-780am2-fam10/romstage.c | 251 --- src/mainboard/iei/kino_780am2fam10/Kconfig | 80 + .../iei/kino_780am2fam10/acpi/cpstate.asl | 75 + src/mainboard/iei/kino_780am2fam10/acpi/ide.asl | 244 +++ .../iei/kino_780am2fam10/acpi/routing.asl | 337 ++++ src/mainboard/iei/kino_780am2fam10/acpi/sata.asl | 149 ++ src/mainboard/iei/kino_780am2fam10/acpi/usb.asl | 161 ++ src/mainboard/iei/kino_780am2fam10/acpi_tables.c | 191 ++ src/mainboard/iei/kino_780am2fam10/board_info.txt | 4 + src/mainboard/iei/kino_780am2fam10/cmos.layout | 96 + src/mainboard/iei/kino_780am2fam10/devicetree.cb | 71 + src/mainboard/iei/kino_780am2fam10/dsdt.asl | 1868 ++++++++++++++++++++ src/mainboard/iei/kino_780am2fam10/get_bus_conf.c | 116 ++ src/mainboard/iei/kino_780am2fam10/irq_tables.c | 112 ++ src/mainboard/iei/kino_780am2fam10/mainboard.c | 66 + src/mainboard/iei/kino_780am2fam10/mb_sysconf.h | 43 + src/mainboard/iei/kino_780am2fam10/mptable.c | 114 ++ src/mainboard/iei/kino_780am2fam10/resourcemap.c | 280 +++ src/mainboard/iei/kino_780am2fam10/romstage.c | 251 +++ src/mainboard/iei/nova4899r/Kconfig | 46 - src/mainboard/iei/nova4899r/board_info.txt | 2 - src/mainboard/iei/nova4899r/cmos.layout | 72 - src/mainboard/iei/nova4899r/devicetree.cb | 64 - src/mainboard/iei/nova4899r/irq_tables.c | 214 --- src/mainboard/iei/nova4899r/romstage.c | 43 - src/mainboard/iei/nova_4899r/Kconfig | 46 + src/mainboard/iei/nova_4899r/board_info.txt | 2 + src/mainboard/iei/nova_4899r/cmos.layout | 72 + src/mainboard/iei/nova_4899r/devicetree.cb | 64 + src/mainboard/iei/nova_4899r/irq_tables.c | 214 +++ src/mainboard/iei/nova_4899r/romstage.c | 43 + src/mainboard/iei/pcisa-lx-800-r10/Kconfig | 32 - src/mainboard/iei/pcisa-lx-800-r10/board_info.txt | 2 - src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb | 76 - src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c | 296 ---- src/mainboard/iei/pcisa-lx-800-r10/romstage.c | 81 - src/mainboard/iei/pcisa_lx_800_r10/Kconfig | 32 + src/mainboard/iei/pcisa_lx_800_r10/board_info.txt | 2 + src/mainboard/iei/pcisa_lx_800_r10/devicetree.cb | 76 + src/mainboard/iei/pcisa_lx_800_r10/irq_tables.c | 296 ++++ src/mainboard/iei/pcisa_lx_800_r10/romstage.c | 81 + src/mainboard/iei/pm-lx-800-r11/Kconfig | 53 - src/mainboard/iei/pm-lx-800-r11/board_info.txt | 6 - src/mainboard/iei/pm-lx-800-r11/devicetree.cb | 101 -- src/mainboard/iei/pm-lx-800-r11/irq_tables.c | 228 --- src/mainboard/iei/pm-lx-800-r11/romstage.c | 78 - src/mainboard/iei/pm-lx2-800-r10/Kconfig | 53 - src/mainboard/iei/pm-lx2-800-r10/board_info.txt | 6 - src/mainboard/iei/pm-lx2-800-r10/devicetree.cb | 87 - src/mainboard/iei/pm-lx2-800-r10/irq_tables.c | 134 -- src/mainboard/iei/pm-lx2-800-r10/mainboard.c | 51 - src/mainboard/iei/pm-lx2-800-r10/romstage.c | 89 - src/mainboard/iei/pm_lx2_800_r10/Kconfig | 53 + src/mainboard/iei/pm_lx2_800_r10/board_info.txt | 6 + src/mainboard/iei/pm_lx2_800_r10/devicetree.cb | 87 + src/mainboard/iei/pm_lx2_800_r10/irq_tables.c | 134 ++ src/mainboard/iei/pm_lx2_800_r10/mainboard.c | 51 + src/mainboard/iei/pm_lx2_800_r10/romstage.c | 89 + src/mainboard/iei/pm_lx_800_r11/Kconfig | 53 + src/mainboard/iei/pm_lx_800_r11/board_info.txt | 6 + src/mainboard/iei/pm_lx_800_r11/devicetree.cb | 101 ++ src/mainboard/iei/pm_lx_800_r11/irq_tables.c | 228 +++ src/mainboard/iei/pm_lx_800_r11/romstage.c | 78 + src/mainboard/iei/rocky-512/Kconfig | 9 - src/mainboard/iei/rocky-512/board_info.txt | 3 - src/mainboard/iei/rocky_512/Kconfig | 9 + src/mainboard/iei/rocky_512/board_info.txt | 3 + src/mainboard/intel/3100_devkit_mt__arvon/Kconfig | 38 + .../intel/3100_devkit_mt__arvon/board_info.txt | 1 + .../intel/3100_devkit_mt__arvon/devicetree.cb | 45 + .../intel/3100_devkit_mt__arvon/irq_tables.c | 43 + .../intel/3100_devkit_mt__arvon/mptable.c | 111 ++ .../intel/3100_devkit_mt__arvon/romstage.c | 119 ++ src/mainboard/intel/Kconfig | 34 +- src/mainboard/intel/bakersport_crb_fsp/Kconfig | 103 ++ .../intel/bakersport_crb_fsp/board_info.txt | 4 + src/mainboard/intel/bakersport_fsp/Kconfig | 103 -- src/mainboard/intel/bakersport_fsp/board_info.txt | 4 - src/mainboard/intel/basking_ridge/Kconfig | 49 + src/mainboard/intel/basking_ridge/Makefile.inc | 23 + .../intel/basking_ridge/acpi/chromeos.asl | 24 + src/mainboard/intel/basking_ridge/acpi/ec.asl | 0 .../intel/basking_ridge/acpi/haswell_pci_irqs.asl | 68 + .../intel/basking_ridge/acpi/mainboard.asl | 28 + .../intel/basking_ridge/acpi/platform.asl | 72 + src/mainboard/intel/basking_ridge/acpi/superio.asl | 35 + src/mainboard/intel/basking_ridge/acpi/thermal.asl | 255 +++ src/mainboard/intel/basking_ridge/acpi_tables.c | 126 ++ src/mainboard/intel/basking_ridge/board_info.txt | 1 + src/mainboard/intel/basking_ridge/chromeos.c | 126 ++ src/mainboard/intel/basking_ridge/cmos.layout | 133 ++ src/mainboard/intel/basking_ridge/devicetree.cb | 84 + src/mainboard/intel/basking_ridge/dsdt.asl | 58 + src/mainboard/intel/basking_ridge/fadt.c | 156 ++ src/mainboard/intel/basking_ridge/gpio.h | 247 +++ src/mainboard/intel/basking_ridge/hda_verb.c | 71 + src/mainboard/intel/basking_ridge/mainboard.c | 54 + src/mainboard/intel/basking_ridge/mainboard_smi.c | 95 + src/mainboard/intel/basking_ridge/onboard.h | 37 + src/mainboard/intel/basking_ridge/romstage.c | 149 ++ src/mainboard/intel/basking_ridge/thermal.h | 57 + src/mainboard/intel/baskingridge/Kconfig | 49 - src/mainboard/intel/baskingridge/Makefile.inc | 23 - src/mainboard/intel/baskingridge/acpi/chromeos.asl | 24 - src/mainboard/intel/baskingridge/acpi/ec.asl | 0 .../intel/baskingridge/acpi/haswell_pci_irqs.asl | 68 - .../intel/baskingridge/acpi/mainboard.asl | 28 - src/mainboard/intel/baskingridge/acpi/platform.asl | 72 - src/mainboard/intel/baskingridge/acpi/superio.asl | 35 - src/mainboard/intel/baskingridge/acpi/thermal.asl | 255 --- src/mainboard/intel/baskingridge/acpi_tables.c | 126 -- src/mainboard/intel/baskingridge/board_info.txt | 1 - src/mainboard/intel/baskingridge/chromeos.c | 126 -- src/mainboard/intel/baskingridge/cmos.layout | 133 -- src/mainboard/intel/baskingridge/devicetree.cb | 84 - src/mainboard/intel/baskingridge/dsdt.asl | 58 - src/mainboard/intel/baskingridge/fadt.c | 156 -- src/mainboard/intel/baskingridge/gpio.h | 247 --- src/mainboard/intel/baskingridge/hda_verb.c | 71 - src/mainboard/intel/baskingridge/mainboard.c | 54 - src/mainboard/intel/baskingridge/mainboard_smi.c | 95 - src/mainboard/intel/baskingridge/onboard.h | 37 - src/mainboard/intel/baskingridge/romstage.c | 149 -- src/mainboard/intel/baskingridge/thermal.h | 57 - src/mainboard/intel/bayley_bay_crb_fsp/Kconfig | 103 ++ .../intel/bayley_bay_crb_fsp/Makefile.inc | 21 + src/mainboard/intel/bayley_bay_crb_fsp/acpi/ec.asl | 0 .../intel/bayley_bay_crb_fsp/acpi/mainboard.asl | 25 + .../intel/bayley_bay_crb_fsp/acpi/superio.asl | 0 .../intel/bayley_bay_crb_fsp/acpi_tables.c | 254 +++ .../intel/bayley_bay_crb_fsp/board_info.txt | 4 + src/mainboard/intel/bayley_bay_crb_fsp/cmos.layout | 132 ++ .../intel/bayley_bay_crb_fsp/devicetree.cb | 81 + src/mainboard/intel/bayley_bay_crb_fsp/dsdt.asl | 57 + src/mainboard/intel/bayley_bay_crb_fsp/fadt.c | 35 + src/mainboard/intel/bayley_bay_crb_fsp/gpio.c | 224 +++ src/mainboard/intel/bayley_bay_crb_fsp/irqroute.c | 22 + src/mainboard/intel/bayley_bay_crb_fsp/irqroute.h | 77 + src/mainboard/intel/bayley_bay_crb_fsp/mainboard.c | 48 + src/mainboard/intel/bayley_bay_crb_fsp/romstage.c | 181 ++ src/mainboard/intel/bayley_bay_crb_fsp/thermal.h | 33 + src/mainboard/intel/bayleybay_fsp/Kconfig | 103 -- src/mainboard/intel/bayleybay_fsp/Makefile.inc | 21 - src/mainboard/intel/bayleybay_fsp/acpi/ec.asl | 0 .../intel/bayleybay_fsp/acpi/mainboard.asl | 25 - src/mainboard/intel/bayleybay_fsp/acpi/superio.asl | 0 src/mainboard/intel/bayleybay_fsp/acpi_tables.c | 254 --- src/mainboard/intel/bayleybay_fsp/board_info.txt | 4 - src/mainboard/intel/bayleybay_fsp/cmos.layout | 132 -- src/mainboard/intel/bayleybay_fsp/devicetree.cb | 81 - src/mainboard/intel/bayleybay_fsp/dsdt.asl | 57 - src/mainboard/intel/bayleybay_fsp/fadt.c | 35 - src/mainboard/intel/bayleybay_fsp/gpio.c | 224 --- src/mainboard/intel/bayleybay_fsp/irqroute.c | 22 - src/mainboard/intel/bayleybay_fsp/irqroute.h | 77 - src/mainboard/intel/bayleybay_fsp/mainboard.c | 48 - src/mainboard/intel/bayleybay_fsp/romstage.c | 181 -- src/mainboard/intel/bayleybay_fsp/thermal.h | 33 - src/mainboard/intel/cougar_canyon2/Kconfig | 68 - src/mainboard/intel/cougar_canyon2/acpi/ec.asl | 0 .../cougar_canyon2/acpi/hostbridge_pci_irqs.asl | 99 -- .../intel/cougar_canyon2/acpi/mainboard.asl | 28 - .../intel/cougar_canyon2/acpi/platform.asl | 85 - .../intel/cougar_canyon2/acpi/superio.asl | 35 - src/mainboard/intel/cougar_canyon2/acpi_tables.c | 105 -- src/mainboard/intel/cougar_canyon2/board_info.txt | 1 - src/mainboard/intel/cougar_canyon2/cmos.layout | 140 -- src/mainboard/intel/cougar_canyon2/devicetree.cb | 73 - src/mainboard/intel/cougar_canyon2/dsdt.asl | 51 - src/mainboard/intel/cougar_canyon2/fadt.c | 171 -- src/mainboard/intel/cougar_canyon2/gpio.h | 308 ---- src/mainboard/intel/cougar_canyon2/hda_verb.c | 40 - src/mainboard/intel/cougar_canyon2/mainboard.c | 56 - src/mainboard/intel/cougar_canyon2/mainboard_smi.c | 97 - src/mainboard/intel/cougar_canyon2/romstage.c | 360 ---- src/mainboard/intel/cougar_canyon2/thermal.h | 57 - src/mainboard/intel/cougar_canyon_2/Kconfig | 68 + src/mainboard/intel/cougar_canyon_2/acpi/ec.asl | 0 .../cougar_canyon_2/acpi/hostbridge_pci_irqs.asl | 99 ++ .../intel/cougar_canyon_2/acpi/mainboard.asl | 28 + .../intel/cougar_canyon_2/acpi/platform.asl | 85 + .../intel/cougar_canyon_2/acpi/superio.asl | 35 + src/mainboard/intel/cougar_canyon_2/acpi_tables.c | 105 ++ src/mainboard/intel/cougar_canyon_2/board_info.txt | 1 + src/mainboard/intel/cougar_canyon_2/cmos.layout | 140 ++ src/mainboard/intel/cougar_canyon_2/devicetree.cb | 73 + src/mainboard/intel/cougar_canyon_2/dsdt.asl | 51 + src/mainboard/intel/cougar_canyon_2/fadt.c | 171 ++ src/mainboard/intel/cougar_canyon_2/gpio.h | 308 ++++ src/mainboard/intel/cougar_canyon_2/hda_verb.c | 40 + src/mainboard/intel/cougar_canyon_2/mainboard.c | 56 + .../intel/cougar_canyon_2/mainboard_smi.c | 97 + src/mainboard/intel/cougar_canyon_2/romstage.c | 360 ++++ src/mainboard/intel/cougar_canyon_2/thermal.h | 57 + src/mainboard/intel/emerald_lake_2/Kconfig | 40 + src/mainboard/intel/emerald_lake_2/Makefile.inc | 21 + .../intel/emerald_lake_2/acpi/chromeos.asl | 24 + src/mainboard/intel/emerald_lake_2/acpi/ec.asl | 0 .../emerald_lake_2/acpi/ivybridge_pci_irqs.asl | 68 + .../intel/emerald_lake_2/acpi/mainboard.asl | 28 + .../intel/emerald_lake_2/acpi/platform.asl | 85 + .../emerald_lake_2/acpi/sandybridge_pci_irqs.asl | 68 + .../intel/emerald_lake_2/acpi/superio.asl | 35 + .../intel/emerald_lake_2/acpi/thermal.asl | 273 +++ src/mainboard/intel/emerald_lake_2/acpi_tables.c | 123 ++ src/mainboard/intel/emerald_lake_2/board_info.txt | 1 + src/mainboard/intel/emerald_lake_2/chromeos.c | 114 ++ src/mainboard/intel/emerald_lake_2/cmos.layout | 152 ++ src/mainboard/intel/emerald_lake_2/devicetree.cb | 82 + src/mainboard/intel/emerald_lake_2/dsdt.asl | 56 + src/mainboard/intel/emerald_lake_2/ec.c | 46 + src/mainboard/intel/emerald_lake_2/ec.h | 53 + src/mainboard/intel/emerald_lake_2/fadt.c | 156 ++ src/mainboard/intel/emerald_lake_2/gpio.h | 106 ++ src/mainboard/intel/emerald_lake_2/hda_verb.c | 71 + src/mainboard/intel/emerald_lake_2/mainboard.c | 54 + src/mainboard/intel/emerald_lake_2/onboard.h | 37 + src/mainboard/intel/emerald_lake_2/romstage.c | 297 ++++ src/mainboard/intel/emerald_lake_2/smihandler.c | 96 + src/mainboard/intel/emerald_lake_2/thermal.h | 57 + src/mainboard/intel/emeraldlake2/Kconfig | 40 - src/mainboard/intel/emeraldlake2/Makefile.inc | 21 - src/mainboard/intel/emeraldlake2/acpi/chromeos.asl | 24 - src/mainboard/intel/emeraldlake2/acpi/ec.asl | 0 .../intel/emeraldlake2/acpi/ivybridge_pci_irqs.asl | 68 - .../intel/emeraldlake2/acpi/mainboard.asl | 28 - src/mainboard/intel/emeraldlake2/acpi/platform.asl | 85 - .../emeraldlake2/acpi/sandybridge_pci_irqs.asl | 68 - src/mainboard/intel/emeraldlake2/acpi/superio.asl | 35 - src/mainboard/intel/emeraldlake2/acpi/thermal.asl | 273 --- src/mainboard/intel/emeraldlake2/acpi_tables.c | 123 -- src/mainboard/intel/emeraldlake2/board_info.txt | 1 - src/mainboard/intel/emeraldlake2/chromeos.c | 114 -- src/mainboard/intel/emeraldlake2/cmos.layout | 152 -- src/mainboard/intel/emeraldlake2/devicetree.cb | 82 - src/mainboard/intel/emeraldlake2/dsdt.asl | 56 - src/mainboard/intel/emeraldlake2/ec.c | 46 - src/mainboard/intel/emeraldlake2/ec.h | 53 - src/mainboard/intel/emeraldlake2/fadt.c | 156 -- src/mainboard/intel/emeraldlake2/gpio.h | 106 -- src/mainboard/intel/emeraldlake2/hda_verb.c | 71 - src/mainboard/intel/emeraldlake2/mainboard.c | 54 - src/mainboard/intel/emeraldlake2/onboard.h | 37 - src/mainboard/intel/emeraldlake2/romstage.c | 297 ---- src/mainboard/intel/emeraldlake2/smihandler.c | 96 - src/mainboard/intel/emeraldlake2/thermal.h | 57 - src/mainboard/intel/minnow_max/Kconfig | 127 ++ src/mainboard/intel/minnow_max/Makefile.inc | 21 + src/mainboard/intel/minnow_max/acpi/ec.asl | 0 src/mainboard/intel/minnow_max/acpi/mainboard.asl | 25 + src/mainboard/intel/minnow_max/acpi/superio.asl | 0 src/mainboard/intel/minnow_max/acpi_tables.c | 282 +++ src/mainboard/intel/minnow_max/board_info.txt | 3 + src/mainboard/intel/minnow_max/cmos.layout | 139 ++ src/mainboard/intel/minnow_max/devicetree.cb | 80 + src/mainboard/intel/minnow_max/dsdt.asl | 57 + src/mainboard/intel/minnow_max/fadt.c | 36 + src/mainboard/intel/minnow_max/gpio.c | 235 +++ src/mainboard/intel/minnow_max/irqroute.c | 22 + src/mainboard/intel/minnow_max/irqroute.h | 78 + src/mainboard/intel/minnow_max/mainboard.c | 45 + src/mainboard/intel/minnow_max/romstage.c | 60 + src/mainboard/intel/minnowmax/Kconfig | 127 -- src/mainboard/intel/minnowmax/Makefile.inc | 21 - src/mainboard/intel/minnowmax/acpi/ec.asl | 0 src/mainboard/intel/minnowmax/acpi/mainboard.asl | 25 - src/mainboard/intel/minnowmax/acpi/superio.asl | 0 src/mainboard/intel/minnowmax/acpi_tables.c | 282 --- src/mainboard/intel/minnowmax/board_info.txt | 3 - src/mainboard/intel/minnowmax/cmos.layout | 139 -- src/mainboard/intel/minnowmax/devicetree.cb | 80 - src/mainboard/intel/minnowmax/dsdt.asl | 57 - src/mainboard/intel/minnowmax/fadt.c | 36 - src/mainboard/intel/minnowmax/gpio.c | 235 --- src/mainboard/intel/minnowmax/irqroute.c | 22 - src/mainboard/intel/minnowmax/irqroute.h | 78 - src/mainboard/intel/minnowmax/mainboard.c | 45 - src/mainboard/intel/minnowmax/romstage.c | 60 - src/mainboard/intel/mohon_peak_crb/Kconfig | 107 ++ src/mainboard/intel/mohon_peak_crb/Makefile.inc | 20 + src/mainboard/intel/mohon_peak_crb/acpi/ec.asl | 0 .../intel/mohon_peak_crb/acpi/mainboard.asl | 28 + .../intel/mohon_peak_crb/acpi/platform.asl | 65 + .../intel/mohon_peak_crb/acpi/superio.asl | 0 .../intel/mohon_peak_crb/acpi/thermal.asl | 0 src/mainboard/intel/mohon_peak_crb/acpi_tables.c | 261 +++ src/mainboard/intel/mohon_peak_crb/board_info.txt | 3 + src/mainboard/intel/mohon_peak_crb/cmos.layout | 141 ++ src/mainboard/intel/mohon_peak_crb/devicetree.cb | 68 + src/mainboard/intel/mohon_peak_crb/dsdt.asl | 53 + src/mainboard/intel/mohon_peak_crb/fadt.c | 42 + src/mainboard/intel/mohon_peak_crb/gpio.h | 178 ++ src/mainboard/intel/mohon_peak_crb/irq_tables.c | 68 + src/mainboard/intel/mohon_peak_crb/irqroute.c | 23 + src/mainboard/intel/mohon_peak_crb/irqroute.h | 73 + src/mainboard/intel/mohon_peak_crb/mainboard.c | 35 + src/mainboard/intel/mohon_peak_crb/romstage.c | 86 + src/mainboard/intel/mohon_peak_crb/thermal.h | 33 + src/mainboard/intel/mohonpeak/Kconfig | 107 -- src/mainboard/intel/mohonpeak/Makefile.inc | 20 - src/mainboard/intel/mohonpeak/acpi/ec.asl | 0 src/mainboard/intel/mohonpeak/acpi/mainboard.asl | 28 - src/mainboard/intel/mohonpeak/acpi/platform.asl | 65 - src/mainboard/intel/mohonpeak/acpi/superio.asl | 0 src/mainboard/intel/mohonpeak/acpi/thermal.asl | 0 src/mainboard/intel/mohonpeak/acpi_tables.c | 261 --- src/mainboard/intel/mohonpeak/board_info.txt | 3 - src/mainboard/intel/mohonpeak/cmos.layout | 141 -- src/mainboard/intel/mohonpeak/devicetree.cb | 68 - src/mainboard/intel/mohonpeak/dsdt.asl | 53 - src/mainboard/intel/mohonpeak/fadt.c | 42 - src/mainboard/intel/mohonpeak/gpio.h | 178 -- src/mainboard/intel/mohonpeak/irq_tables.c | 68 - src/mainboard/intel/mohonpeak/irqroute.c | 23 - src/mainboard/intel/mohonpeak/irqroute.h | 73 - src/mainboard/intel/mohonpeak/mainboard.c | 35 - src/mainboard/intel/mohonpeak/romstage.c | 86 - src/mainboard/intel/mohonpeak/thermal.h | 33 - src/mainboard/intel/mtarvon/Kconfig | 38 - src/mainboard/intel/mtarvon/board_info.txt | 1 - src/mainboard/intel/mtarvon/devicetree.cb | 45 - src/mainboard/intel/mtarvon/irq_tables.c | 43 - src/mainboard/intel/mtarvon/mptable.c | 111 -- src/mainboard/intel/mtarvon/romstage.c | 119 -- src/mainboard/intel/whitetip_mountain_2/Kconfig | 51 + .../intel/whitetip_mountain_2/Makefile.inc | 26 + .../intel/whitetip_mountain_2/acpi/chromeos.asl | 24 + .../intel/whitetip_mountain_2/acpi/ec.asl | 37 + .../whitetip_mountain_2/acpi/haswell_pci_irqs.asl | 75 + .../intel/whitetip_mountain_2/acpi/mainboard.asl | 28 + .../intel/whitetip_mountain_2/acpi/platform.asl | 72 + .../intel/whitetip_mountain_2/acpi/superio.asl | 20 + .../intel/whitetip_mountain_2/acpi/thermal.asl | 245 +++ .../intel/whitetip_mountain_2/acpi_tables.c | 123 ++ .../intel/whitetip_mountain_2/board_info.txt | 1 + src/mainboard/intel/whitetip_mountain_2/chromeos.c | 66 + .../intel/whitetip_mountain_2/cmos.layout | 137 ++ .../intel/whitetip_mountain_2/devicetree.cb | 88 + src/mainboard/intel/whitetip_mountain_2/dsdt.asl | 58 + src/mainboard/intel/whitetip_mountain_2/fadt.c | 156 ++ src/mainboard/intel/whitetip_mountain_2/gpio.h | 124 ++ src/mainboard/intel/whitetip_mountain_2/graphics.c | 87 + src/mainboard/intel/whitetip_mountain_2/hda_verb.c | 71 + src/mainboard/intel/whitetip_mountain_2/i915.c | 233 +++ src/mainboard/intel/whitetip_mountain_2/intel_dp.c | 167 ++ .../intel/whitetip_mountain_2/mainboard.c | 54 + .../intel/whitetip_mountain_2/mainboard_smi.c | 71 + src/mainboard/intel/whitetip_mountain_2/romstage.c | 140 ++ src/mainboard/intel/whitetip_mountain_2/thermal.h | 57 + src/mainboard/intel/wtm2/Kconfig | 51 - src/mainboard/intel/wtm2/Makefile.inc | 26 - src/mainboard/intel/wtm2/acpi/chromeos.asl | 24 - src/mainboard/intel/wtm2/acpi/ec.asl | 37 - src/mainboard/intel/wtm2/acpi/haswell_pci_irqs.asl | 75 - src/mainboard/intel/wtm2/acpi/mainboard.asl | 28 - src/mainboard/intel/wtm2/acpi/platform.asl | 72 - src/mainboard/intel/wtm2/acpi/superio.asl | 20 - src/mainboard/intel/wtm2/acpi/thermal.asl | 245 --- src/mainboard/intel/wtm2/acpi_tables.c | 123 -- src/mainboard/intel/wtm2/board_info.txt | 1 - src/mainboard/intel/wtm2/chromeos.c | 66 - src/mainboard/intel/wtm2/cmos.layout | 137 -- src/mainboard/intel/wtm2/devicetree.cb | 88 - src/mainboard/intel/wtm2/dsdt.asl | 58 - src/mainboard/intel/wtm2/fadt.c | 156 -- src/mainboard/intel/wtm2/gpio.h | 124 -- src/mainboard/intel/wtm2/graphics.c | 87 - src/mainboard/intel/wtm2/hda_verb.c | 71 - src/mainboard/intel/wtm2/i915.c | 233 --- src/mainboard/intel/wtm2/intel_dp.c | 167 -- src/mainboard/intel/wtm2/mainboard.c | 54 - src/mainboard/intel/wtm2/mainboard_smi.c | 71 - src/mainboard/intel/wtm2/romstage.c | 140 -- src/mainboard/intel/wtm2/thermal.h | 57 - src/mainboard/iwave/Kconfig | 4 +- src/mainboard/iwave/iWRainbowG6/Kconfig | 36 - src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl | 50 - src/mainboard/iwave/iWRainbowG6/acpi/ec.asl | 51 - .../iWRainbowG6/acpi/northbridge_pci_irqs.asl | 85 - src/mainboard/iwave/iWRainbowG6/acpi/platform.asl | 92 - .../iwave/iWRainbowG6/acpi/sleepstates.asl | 26 - .../iWRainbowG6/acpi/southbridge_pci_irqs.asl | 102 -- src/mainboard/iwave/iWRainbowG6/acpi/superio.asl | 47 - src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl | 95 - src/mainboard/iwave/iWRainbowG6/acpi/video.asl | 44 - src/mainboard/iwave/iWRainbowG6/acpi_tables.c | 83 - src/mainboard/iwave/iWRainbowG6/board_info.txt | 3 - src/mainboard/iwave/iWRainbowG6/cmos.layout | 147 -- src/mainboard/iwave/iWRainbowG6/devicetree.cb | 39 - src/mainboard/iwave/iWRainbowG6/dsdt.asl | 50 - src/mainboard/iwave/iWRainbowG6/fadt.c | 155 -- src/mainboard/iwave/iWRainbowG6/hda_verb.c | 92 - src/mainboard/iwave/iWRainbowG6/irq_tables.c | 55 - src/mainboard/iwave/iWRainbowG6/mainboard.c | 31 - src/mainboard/iwave/iWRainbowG6/mptable.c | 105 -- src/mainboard/iwave/iWRainbowG6/romstage.c | 383 ---- src/mainboard/iwave/iWRainbowG6/smihandler.c | 51 - src/mainboard/iwave/iwrainbowg6/Kconfig | 36 + src/mainboard/iwave/iwrainbowg6/acpi/cpu.asl | 50 + src/mainboard/iwave/iwrainbowg6/acpi/ec.asl | 51 + .../iwrainbowg6/acpi/northbridge_pci_irqs.asl | 85 + src/mainboard/iwave/iwrainbowg6/acpi/platform.asl | 92 + .../iwave/iwrainbowg6/acpi/sleepstates.asl | 26 + .../iwrainbowg6/acpi/southbridge_pci_irqs.asl | 102 ++ src/mainboard/iwave/iwrainbowg6/acpi/superio.asl | 47 + src/mainboard/iwave/iwrainbowg6/acpi/thermal.asl | 95 + src/mainboard/iwave/iwrainbowg6/acpi/video.asl | 44 + src/mainboard/iwave/iwrainbowg6/acpi_tables.c | 83 + src/mainboard/iwave/iwrainbowg6/board_info.txt | 3 + src/mainboard/iwave/iwrainbowg6/cmos.layout | 147 ++ src/mainboard/iwave/iwrainbowg6/devicetree.cb | 39 + src/mainboard/iwave/iwrainbowg6/dsdt.asl | 50 + src/mainboard/iwave/iwrainbowg6/fadt.c | 155 ++ src/mainboard/iwave/iwrainbowg6/hda_verb.c | 92 + src/mainboard/iwave/iwrainbowg6/irq_tables.c | 55 + src/mainboard/iwave/iwrainbowg6/mainboard.c | 31 + src/mainboard/iwave/iwrainbowg6/mptable.c | 105 ++ src/mainboard/iwave/iwrainbowg6/romstage.c | 383 ++++ src/mainboard/iwave/iwrainbowg6/smihandler.c | 51 + src/mainboard/jetway/Kconfig | 6 +- src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c | 103 -- src/mainboard/jetway/nf81-t56n-lf/Kconfig | 98 - src/mainboard/jetway/nf81-t56n-lf/Makefile.inc | 35 - src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h | 64 - .../jetway/nf81-t56n-lf/PlatformGnbPcie.c | 191 -- .../jetway/nf81-t56n-lf/PlatformGnbPcieComplex.h | 84 - src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl | 82 - .../jetway/nf81-t56n-lf/acpi/mainboard.asl | 67 - src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl | 340 ---- src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl | 149 -- src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl | 120 -- src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl | 22 - src/mainboard/jetway/nf81-t56n-lf/acpi/thermal.asl | 21 - src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl | 174 -- src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c | 268 --- src/mainboard/jetway/nf81-t56n-lf/agesawrapper.c | 567 ------ src/mainboard/jetway/nf81-t56n-lf/agesawrapper.h | 62 - src/mainboard/jetway/nf81-t56n-lf/board_info.txt | 6 - src/mainboard/jetway/nf81-t56n-lf/buildOpts.c | 347 ---- src/mainboard/jetway/nf81-t56n-lf/cmos.layout | 116 -- src/mainboard/jetway/nf81-t56n-lf/devicetree.cb | 151 -- src/mainboard/jetway/nf81-t56n-lf/dsdt.asl | 64 - src/mainboard/jetway/nf81-t56n-lf/irq_tables.c | 109 -- src/mainboard/jetway/nf81-t56n-lf/mainboard.c | 184 -- src/mainboard/jetway/nf81-t56n-lf/mptable.c | 155 -- src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h | 260 --- src/mainboard/jetway/nf81-t56n-lf/romstage.c | 132 -- src/mainboard/jetway/nf81_t56n_lf/BiosCallOuts.c | 103 ++ src/mainboard/jetway/nf81_t56n_lf/Kconfig | 98 + src/mainboard/jetway/nf81_t56n_lf/Makefile.inc | 35 + src/mainboard/jetway/nf81_t56n_lf/OptionsIds.h | 64 + .../jetway/nf81_t56n_lf/PlatformGnbPcie.c | 191 ++ .../jetway/nf81_t56n_lf/PlatformGnbPcieComplex.h | 84 + src/mainboard/jetway/nf81_t56n_lf/acpi/gpe.asl | 82 + .../jetway/nf81_t56n_lf/acpi/mainboard.asl | 67 + src/mainboard/jetway/nf81_t56n_lf/acpi/routing.asl | 340 ++++ src/mainboard/jetway/nf81_t56n_lf/acpi/sata.asl | 149 ++ src/mainboard/jetway/nf81_t56n_lf/acpi/sleep.asl | 120 ++ src/mainboard/jetway/nf81_t56n_lf/acpi/superio.asl | 22 + src/mainboard/jetway/nf81_t56n_lf/acpi/thermal.asl | 21 + src/mainboard/jetway/nf81_t56n_lf/acpi/usb_oc.asl | 174 ++ src/mainboard/jetway/nf81_t56n_lf/acpi_tables.c | 268 +++ src/mainboard/jetway/nf81_t56n_lf/agesawrapper.c | 567 ++++++ src/mainboard/jetway/nf81_t56n_lf/agesawrapper.h | 62 + src/mainboard/jetway/nf81_t56n_lf/board_info.txt | 6 + src/mainboard/jetway/nf81_t56n_lf/buildOpts.c | 347 ++++ src/mainboard/jetway/nf81_t56n_lf/cmos.layout | 116 ++ src/mainboard/jetway/nf81_t56n_lf/devicetree.cb | 151 ++ src/mainboard/jetway/nf81_t56n_lf/dsdt.asl | 64 + src/mainboard/jetway/nf81_t56n_lf/irq_tables.c | 109 ++ src/mainboard/jetway/nf81_t56n_lf/mainboard.c | 184 ++ src/mainboard/jetway/nf81_t56n_lf/mptable.c | 155 ++ src/mainboard/jetway/nf81_t56n_lf/platform_cfg.h | 260 +++ src/mainboard/jetway/nf81_t56n_lf/romstage.c | 132 ++ src/mainboard/jetway/pa78vm5/Kconfig | 76 - src/mainboard/jetway/pa78vm5/acpi/cpstate.asl | 75 - src/mainboard/jetway/pa78vm5/acpi/ide.asl | 244 --- src/mainboard/jetway/pa78vm5/acpi/routing.asl | 311 ---- src/mainboard/jetway/pa78vm5/acpi/sata.asl | 149 -- src/mainboard/jetway/pa78vm5/acpi/usb.asl | 161 -- src/mainboard/jetway/pa78vm5/acpi_tables.c | 221 --- src/mainboard/jetway/pa78vm5/board_info.txt | 2 - src/mainboard/jetway/pa78vm5/cmos.layout | 96 - src/mainboard/jetway/pa78vm5/devicetree.cb | 110 -- src/mainboard/jetway/pa78vm5/dsdt.asl | 1850 ------------------- src/mainboard/jetway/pa78vm5/get_bus_conf.c | 116 -- src/mainboard/jetway/pa78vm5/irq_tables.c | 112 -- src/mainboard/jetway/pa78vm5/mainboard.c | 113 -- src/mainboard/jetway/pa78vm5/mptable.c | 115 -- src/mainboard/jetway/pa78vm5/resourcemap.c | 281 --- src/mainboard/jetway/pa78vm5/romstage.c | 259 --- src/mainboard/jetway/pa78vm5_fam10/Kconfig | 76 + .../jetway/pa78vm5_fam10/acpi/cpstate.asl | 75 + src/mainboard/jetway/pa78vm5_fam10/acpi/ide.asl | 244 +++ .../jetway/pa78vm5_fam10/acpi/routing.asl | 311 ++++ src/mainboard/jetway/pa78vm5_fam10/acpi/sata.asl | 149 ++ src/mainboard/jetway/pa78vm5_fam10/acpi/usb.asl | 161 ++ src/mainboard/jetway/pa78vm5_fam10/acpi_tables.c | 221 +++ src/mainboard/jetway/pa78vm5_fam10/board_info.txt | 2 + src/mainboard/jetway/pa78vm5_fam10/cmos.layout | 96 + src/mainboard/jetway/pa78vm5_fam10/devicetree.cb | 110 ++ src/mainboard/jetway/pa78vm5_fam10/dsdt.asl | 1850 +++++++++++++++++++ src/mainboard/jetway/pa78vm5_fam10/get_bus_conf.c | 116 ++ src/mainboard/jetway/pa78vm5_fam10/irq_tables.c | 112 ++ src/mainboard/jetway/pa78vm5_fam10/mainboard.c | 113 ++ src/mainboard/jetway/pa78vm5_fam10/mptable.c | 115 ++ src/mainboard/jetway/pa78vm5_fam10/resourcemap.c | 281 +++ src/mainboard/jetway/pa78vm5_fam10/romstage.c | 259 +++ src/mainboard/kontron/986lcd-m/Kconfig | 45 - src/mainboard/kontron/986lcd-m/acpi/ec.asl | 49 - .../kontron/986lcd-m/acpi/i945_pci_irqs.asl | 85 - .../kontron/986lcd-m/acpi/ich7_pci_irqs.asl | 102 -- src/mainboard/kontron/986lcd-m/acpi/platform.asl | 90 - src/mainboard/kontron/986lcd-m/acpi/superio.asl | 91 - src/mainboard/kontron/986lcd-m/acpi/thermal.asl | 93 - src/mainboard/kontron/986lcd-m/acpi/video.asl | 42 - src/mainboard/kontron/986lcd-m/acpi_tables.c | 80 - src/mainboard/kontron/986lcd-m/board_info.txt | 7 - src/mainboard/kontron/986lcd-m/cmos.layout | 197 --- src/mainboard/kontron/986lcd-m/devicetree.cb | 130 -- src/mainboard/kontron/986lcd-m/dsdt.asl | 50 - src/mainboard/kontron/986lcd-m/fadt.c | 33 - src/mainboard/kontron/986lcd-m/hda_verb.c | 7 - src/mainboard/kontron/986lcd-m/irq_tables.c | 60 - src/mainboard/kontron/986lcd-m/mainboard.c | 175 -- src/mainboard/kontron/986lcd-m/mptable.c | 116 -- src/mainboard/kontron/986lcd-m/romstage.c | 431 ----- src/mainboard/kontron/986lcd-m/smihandler.c | 49 - src/mainboard/kontron/986lcd_m/Kconfig | 45 + src/mainboard/kontron/986lcd_m/acpi/ec.asl | 49 + .../kontron/986lcd_m/acpi/i945_pci_irqs.asl | 85 + .../kontron/986lcd_m/acpi/ich7_pci_irqs.asl | 102 ++ src/mainboard/kontron/986lcd_m/acpi/platform.asl | 90 + src/mainboard/kontron/986lcd_m/acpi/superio.asl | 91 + src/mainboard/kontron/986lcd_m/acpi/thermal.asl | 93 + src/mainboard/kontron/986lcd_m/acpi/video.asl | 42 + src/mainboard/kontron/986lcd_m/acpi_tables.c | 80 + src/mainboard/kontron/986lcd_m/board_info.txt | 7 + src/mainboard/kontron/986lcd_m/cmos.layout | 197 +++ src/mainboard/kontron/986lcd_m/devicetree.cb | 130 ++ src/mainboard/kontron/986lcd_m/dsdt.asl | 50 + src/mainboard/kontron/986lcd_m/fadt.c | 33 + src/mainboard/kontron/986lcd_m/hda_verb.c | 7 + src/mainboard/kontron/986lcd_m/irq_tables.c | 60 + src/mainboard/kontron/986lcd_m/mainboard.c | 175 ++ src/mainboard/kontron/986lcd_m/mptable.c | 116 ++ src/mainboard/kontron/986lcd_m/romstage.c | 431 +++++ src/mainboard/kontron/986lcd_m/smihandler.c | 49 + src/mainboard/kontron/Kconfig | 10 +- src/mainboard/kontron/kt690/Kconfig | 60 - src/mainboard/kontron/kt690/acpi/ide.asl | 244 --- src/mainboard/kontron/kt690/acpi/routing.asl | 262 --- src/mainboard/kontron/kt690/acpi/sata.asl | 149 -- src/mainboard/kontron/kt690/acpi/usb.asl | 161 -- src/mainboard/kontron/kt690/acpi_tables.c | 58 - src/mainboard/kontron/kt690/board_info.txt | 2 - src/mainboard/kontron/kt690/cmos.layout | 117 -- src/mainboard/kontron/kt690/devicetree.cb | 126 -- src/mainboard/kontron/kt690/dsdt.asl | 1792 ------------------- src/mainboard/kontron/kt690/fadt.c | 201 --- src/mainboard/kontron/kt690/get_bus_conf.c | 116 -- src/mainboard/kontron/kt690/irq_tables.c | 118 -- src/mainboard/kontron/kt690/mainboard.c | 194 -- src/mainboard/kontron/kt690/mptable.c | 113 -- src/mainboard/kontron/kt690/resourcemap.c | 278 --- src/mainboard/kontron/kt690/romstage.c | 155 -- src/mainboard/kontron/kt690_mitx/Kconfig | 60 + src/mainboard/kontron/kt690_mitx/acpi/ide.asl | 244 +++ src/mainboard/kontron/kt690_mitx/acpi/routing.asl | 262 +++ src/mainboard/kontron/kt690_mitx/acpi/sata.asl | 149 ++ src/mainboard/kontron/kt690_mitx/acpi/usb.asl | 161 ++ src/mainboard/kontron/kt690_mitx/acpi_tables.c | 58 + src/mainboard/kontron/kt690_mitx/board_info.txt | 2 + src/mainboard/kontron/kt690_mitx/cmos.layout | 117 ++ src/mainboard/kontron/kt690_mitx/devicetree.cb | 126 ++ src/mainboard/kontron/kt690_mitx/dsdt.asl | 1792 +++++++++++++++++++ src/mainboard/kontron/kt690_mitx/fadt.c | 201 +++ src/mainboard/kontron/kt690_mitx/get_bus_conf.c | 116 ++ src/mainboard/kontron/kt690_mitx/irq_tables.c | 118 ++ src/mainboard/kontron/kt690_mitx/mainboard.c | 194 ++ src/mainboard/kontron/kt690_mitx/mptable.c | 113 ++ src/mainboard/kontron/kt690_mitx/resourcemap.c | 278 +++ src/mainboard/kontron/kt690_mitx/romstage.c | 155 ++ src/mainboard/kontron/ktqm77/Kconfig | 78 - src/mainboard/kontron/ktqm77/acpi/ec.asl | 7 - src/mainboard/kontron/ktqm77/acpi/mainboard.asl | 27 - src/mainboard/kontron/ktqm77/acpi/platform.asl | 73 - .../kontron/ktqm77/acpi/sandybridge_pci_irqs.asl | 87 - src/mainboard/kontron/ktqm77/acpi/superio.asl | 12 - src/mainboard/kontron/ktqm77/acpi/thermal.asl | 73 - src/mainboard/kontron/ktqm77/acpi_tables.c | 94 - src/mainboard/kontron/ktqm77/board_info.txt | 1 - src/mainboard/kontron/ktqm77/cmos.layout | 181 -- src/mainboard/kontron/ktqm77/devicetree.cb | 161 -- src/mainboard/kontron/ktqm77/dsdt.asl | 54 - src/mainboard/kontron/ktqm77/fadt.c | 169 -- src/mainboard/kontron/ktqm77/gpio.h | 303 ---- src/mainboard/kontron/ktqm77/hda_verb.c | 121 -- src/mainboard/kontron/ktqm77/mainboard.c | 202 --- src/mainboard/kontron/ktqm77/romstage.c | 302 ---- src/mainboard/kontron/ktqm77/smihandler.c | 80 - src/mainboard/kontron/ktqm77/thermal.h | 31 - src/mainboard/kontron/ktqm77_mitx/Kconfig | 78 + src/mainboard/kontron/ktqm77_mitx/acpi/ec.asl | 7 + .../kontron/ktqm77_mitx/acpi/mainboard.asl | 27 + .../kontron/ktqm77_mitx/acpi/platform.asl | 73 + .../ktqm77_mitx/acpi/sandybridge_pci_irqs.asl | 87 + src/mainboard/kontron/ktqm77_mitx/acpi/superio.asl | 12 + src/mainboard/kontron/ktqm77_mitx/acpi/thermal.asl | 73 + src/mainboard/kontron/ktqm77_mitx/acpi_tables.c | 94 + src/mainboard/kontron/ktqm77_mitx/board_info.txt | 1 + src/mainboard/kontron/ktqm77_mitx/cmos.layout | 181 ++ src/mainboard/kontron/ktqm77_mitx/devicetree.cb | 161 ++ src/mainboard/kontron/ktqm77_mitx/dsdt.asl | 54 + src/mainboard/kontron/ktqm77_mitx/fadt.c | 169 ++ src/mainboard/kontron/ktqm77_mitx/gpio.h | 303 ++++ src/mainboard/kontron/ktqm77_mitx/hda_verb.c | 121 ++ src/mainboard/kontron/ktqm77_mitx/mainboard.c | 202 +++ src/mainboard/kontron/ktqm77_mitx/romstage.c | 302 ++++ src/mainboard/kontron/ktqm77_mitx/smihandler.c | 80 + src/mainboard/kontron/ktqm77_mitx/thermal.h | 31 + src/mainboard/lanner/Kconfig | 4 +- src/mainboard/lanner/em8510/Kconfig | 33 - src/mainboard/lanner/em8510/board_info.txt | 1 - src/mainboard/lanner/em8510/cmos.layout | 72 - src/mainboard/lanner/em8510/devicetree.cb | 56 - src/mainboard/lanner/em8510/irq_tables.c | 56 - src/mainboard/lanner/em8510/romstage.c | 81 - src/mainboard/lanner/em_8510/Kconfig | 33 + src/mainboard/lanner/em_8510/board_info.txt | 1 + src/mainboard/lanner/em_8510/cmos.layout | 72 + src/mainboard/lanner/em_8510/devicetree.cb | 56 + src/mainboard/lanner/em_8510/irq_tables.c | 56 + src/mainboard/lanner/em_8510/romstage.c | 81 + src/mainboard/lenovo/Kconfig | 46 +- src/mainboard/lenovo/t520/Kconfig | 80 - src/mainboard/lenovo/t520/Makefile.inc | 21 - src/mainboard/lenovo/t520/acpi/ec.asl | 26 - src/mainboard/lenovo/t520/acpi/gpe.asl | 13 - src/mainboard/lenovo/t520/acpi/platform.asl | 77 - .../lenovo/t520/acpi/sandybridge_pci_irqs.asl | 64 - src/mainboard/lenovo/t520/acpi/superio.asl | 1 - src/mainboard/lenovo/t520/acpi_tables.c | 96 - src/mainboard/lenovo/t520/board_info.txt | 5 - src/mainboard/lenovo/t520/cmos.default | 18 - src/mainboard/lenovo/t520/cmos.layout | 166 -- src/mainboard/lenovo/t520/devicetree.cb | 147 -- src/mainboard/lenovo/t520/dsdt.asl | 60 - src/mainboard/lenovo/t520/fadt.c | 160 -- src/mainboard/lenovo/t520/gpio.c | 309 ---- src/mainboard/lenovo/t520/hda_verb.c | 73 - src/mainboard/lenovo/t520/mainboard.c | 81 - src/mainboard/lenovo/t520/romstage.c | 130 -- src/mainboard/lenovo/t520/smihandler.c | 189 -- src/mainboard/lenovo/t520/thermal.h | 30 - src/mainboard/lenovo/t530/Kconfig | 77 - src/mainboard/lenovo/t530/Makefile.inc | 21 - src/mainboard/lenovo/t530/acpi/ec.asl | 26 - src/mainboard/lenovo/t530/acpi/gpe.asl | 13 - src/mainboard/lenovo/t530/acpi/platform.asl | 77 - .../lenovo/t530/acpi/sandybridge_pci_irqs.asl | 64 - src/mainboard/lenovo/t530/acpi/superio.asl | 1 - src/mainboard/lenovo/t530/acpi_tables.c | 96 - src/mainboard/lenovo/t530/board_info.txt | 5 - src/mainboard/lenovo/t530/cmos.default | 18 - src/mainboard/lenovo/t530/cmos.layout | 166 -- src/mainboard/lenovo/t530/devicetree.cb | 153 -- src/mainboard/lenovo/t530/dsdt.asl | 60 - src/mainboard/lenovo/t530/fadt.c | 160 -- src/mainboard/lenovo/t530/gpio.c | 345 ---- src/mainboard/lenovo/t530/hda_verb.c | 130 -- src/mainboard/lenovo/t530/mainboard.c | 85 - src/mainboard/lenovo/t530/romstage.c | 117 -- src/mainboard/lenovo/t530/smihandler.c | 194 -- src/mainboard/lenovo/t530/thermal.h | 30 - src/mainboard/lenovo/t60/Kconfig | 58 - src/mainboard/lenovo/t60/Makefile.inc | 21 - src/mainboard/lenovo/t60/acpi/dock.asl | 98 - src/mainboard/lenovo/t60/acpi/ec.asl | 22 - src/mainboard/lenovo/t60/acpi/gpe.asl | 30 - src/mainboard/lenovo/t60/acpi/i945_pci_irqs.asl | 63 - src/mainboard/lenovo/t60/acpi/ich7_pci_irqs.asl | 46 - src/mainboard/lenovo/t60/acpi/mainboard.asl | 0 src/mainboard/lenovo/t60/acpi/platform.asl | 205 --- src/mainboard/lenovo/t60/acpi/superio.asl | 0 src/mainboard/lenovo/t60/acpi/video.asl | 55 - src/mainboard/lenovo/t60/acpi_tables.c | 91 - src/mainboard/lenovo/t60/board_info.txt | 6 - src/mainboard/lenovo/t60/cmos.default | 21 - src/mainboard/lenovo/t60/cmos.layout | 159 -- src/mainboard/lenovo/t60/devicetree.cb | 230 --- src/mainboard/lenovo/t60/dock.c | 238 --- src/mainboard/lenovo/t60/dock.h | 30 - src/mainboard/lenovo/t60/dsdt.asl | 61 - src/mainboard/lenovo/t60/fadt.c | 28 - src/mainboard/lenovo/t60/hda_verb.c | 7 - src/mainboard/lenovo/t60/irq_tables.c | 61 - src/mainboard/lenovo/t60/mainboard.c | 105 -- src/mainboard/lenovo/t60/mptable.c | 76 - src/mainboard/lenovo/t60/romstage.c | 332 ---- src/mainboard/lenovo/t60/smi.h | 28 - src/mainboard/lenovo/t60/smihandler.c | 197 --- src/mainboard/lenovo/thinkpad_t520/Kconfig | 80 + src/mainboard/lenovo/thinkpad_t520/Makefile.inc | 21 + src/mainboard/lenovo/thinkpad_t520/acpi/ec.asl | 26 + src/mainboard/lenovo/thinkpad_t520/acpi/gpe.asl | 13 + .../lenovo/thinkpad_t520/acpi/platform.asl | 77 + .../thinkpad_t520/acpi/sandybridge_pci_irqs.asl | 64 + .../lenovo/thinkpad_t520/acpi/superio.asl | 1 + src/mainboard/lenovo/thinkpad_t520/acpi_tables.c | 96 + src/mainboard/lenovo/thinkpad_t520/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_t520/cmos.default | 18 + src/mainboard/lenovo/thinkpad_t520/cmos.layout | 166 ++ src/mainboard/lenovo/thinkpad_t520/devicetree.cb | 147 ++ src/mainboard/lenovo/thinkpad_t520/dsdt.asl | 60 + src/mainboard/lenovo/thinkpad_t520/fadt.c | 160 ++ src/mainboard/lenovo/thinkpad_t520/gpio.c | 309 ++++ src/mainboard/lenovo/thinkpad_t520/hda_verb.c | 73 + src/mainboard/lenovo/thinkpad_t520/mainboard.c | 81 + src/mainboard/lenovo/thinkpad_t520/romstage.c | 130 ++ src/mainboard/lenovo/thinkpad_t520/smihandler.c | 189 ++ src/mainboard/lenovo/thinkpad_t520/thermal.h | 30 + src/mainboard/lenovo/thinkpad_t530/Kconfig | 77 + src/mainboard/lenovo/thinkpad_t530/Makefile.inc | 21 + src/mainboard/lenovo/thinkpad_t530/acpi/ec.asl | 26 + src/mainboard/lenovo/thinkpad_t530/acpi/gpe.asl | 13 + .../lenovo/thinkpad_t530/acpi/platform.asl | 77 + .../thinkpad_t530/acpi/sandybridge_pci_irqs.asl | 64 + .../lenovo/thinkpad_t530/acpi/superio.asl | 1 + src/mainboard/lenovo/thinkpad_t530/acpi_tables.c | 96 + src/mainboard/lenovo/thinkpad_t530/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_t530/cmos.default | 18 + src/mainboard/lenovo/thinkpad_t530/cmos.layout | 166 ++ src/mainboard/lenovo/thinkpad_t530/devicetree.cb | 153 ++ src/mainboard/lenovo/thinkpad_t530/dsdt.asl | 60 + src/mainboard/lenovo/thinkpad_t530/fadt.c | 160 ++ src/mainboard/lenovo/thinkpad_t530/gpio.c | 345 ++++ src/mainboard/lenovo/thinkpad_t530/hda_verb.c | 130 ++ src/mainboard/lenovo/thinkpad_t530/mainboard.c | 85 + src/mainboard/lenovo/thinkpad_t530/romstage.c | 117 ++ src/mainboard/lenovo/thinkpad_t530/smihandler.c | 194 ++ src/mainboard/lenovo/thinkpad_t530/thermal.h | 30 + src/mainboard/lenovo/thinkpad_t60/Kconfig | 58 + src/mainboard/lenovo/thinkpad_t60/Makefile.inc | 21 + src/mainboard/lenovo/thinkpad_t60/acpi/dock.asl | 98 + src/mainboard/lenovo/thinkpad_t60/acpi/ec.asl | 22 + src/mainboard/lenovo/thinkpad_t60/acpi/gpe.asl | 30 + .../lenovo/thinkpad_t60/acpi/i945_pci_irqs.asl | 63 + .../lenovo/thinkpad_t60/acpi/ich7_pci_irqs.asl | 46 + .../lenovo/thinkpad_t60/acpi/mainboard.asl | 0 .../lenovo/thinkpad_t60/acpi/platform.asl | 205 +++ src/mainboard/lenovo/thinkpad_t60/acpi/superio.asl | 0 src/mainboard/lenovo/thinkpad_t60/acpi/video.asl | 55 + src/mainboard/lenovo/thinkpad_t60/acpi_tables.c | 91 + src/mainboard/lenovo/thinkpad_t60/board_info.txt | 6 + src/mainboard/lenovo/thinkpad_t60/cmos.default | 21 + src/mainboard/lenovo/thinkpad_t60/cmos.layout | 159 ++ src/mainboard/lenovo/thinkpad_t60/devicetree.cb | 230 +++ src/mainboard/lenovo/thinkpad_t60/dock.c | 238 +++ src/mainboard/lenovo/thinkpad_t60/dock.h | 30 + src/mainboard/lenovo/thinkpad_t60/dsdt.asl | 61 + src/mainboard/lenovo/thinkpad_t60/fadt.c | 28 + src/mainboard/lenovo/thinkpad_t60/hda_verb.c | 7 + src/mainboard/lenovo/thinkpad_t60/irq_tables.c | 61 + src/mainboard/lenovo/thinkpad_t60/mainboard.c | 105 ++ src/mainboard/lenovo/thinkpad_t60/mptable.c | 76 + src/mainboard/lenovo/thinkpad_t60/romstage.c | 332 ++++ src/mainboard/lenovo/thinkpad_t60/smi.h | 28 + src/mainboard/lenovo/thinkpad_t60/smihandler.c | 197 +++ src/mainboard/lenovo/thinkpad_x200/Kconfig | 49 + src/mainboard/lenovo/thinkpad_x200/Makefile.inc | 20 + src/mainboard/lenovo/thinkpad_x200/acpi/dock.asl | 73 + src/mainboard/lenovo/thinkpad_x200/acpi/ec.asl | 1 + .../lenovo/thinkpad_x200/acpi/gm45_pci_irqs.asl | 86 + src/mainboard/lenovo/thinkpad_x200/acpi/gpe.asl | 43 + .../lenovo/thinkpad_x200/acpi/ich9_pci_irqs.asl | 110 ++ .../lenovo/thinkpad_x200/acpi/platform.asl | 206 +++ .../lenovo/thinkpad_x200/acpi/superio.asl | 0 src/mainboard/lenovo/thinkpad_x200/acpi_tables.c | 91 + src/mainboard/lenovo/thinkpad_x200/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_x200/cmos.default | 15 + src/mainboard/lenovo/thinkpad_x200/cmos.layout | 167 ++ src/mainboard/lenovo/thinkpad_x200/cstates.c | 41 + src/mainboard/lenovo/thinkpad_x200/devicetree.cb | 203 +++ src/mainboard/lenovo/thinkpad_x200/dock.c | 65 + src/mainboard/lenovo/thinkpad_x200/dock.h | 26 + src/mainboard/lenovo/thinkpad_x200/dsdt.asl | 60 + src/mainboard/lenovo/thinkpad_x200/fadt.c | 158 ++ src/mainboard/lenovo/thinkpad_x200/hda_verb.c | 51 + src/mainboard/lenovo/thinkpad_x200/mainboard.c | 66 + src/mainboard/lenovo/thinkpad_x200/mptable.c | 1 + src/mainboard/lenovo/thinkpad_x200/romstage.c | 212 +++ src/mainboard/lenovo/thinkpad_x200/smihandler.c | 75 + src/mainboard/lenovo/thinkpad_x201/Kconfig | 56 + src/mainboard/lenovo/thinkpad_x201/Makefile.inc | 23 + src/mainboard/lenovo/thinkpad_x201/acpi/dock.asl | 79 + src/mainboard/lenovo/thinkpad_x201/acpi/ec.asl | 26 + src/mainboard/lenovo/thinkpad_x201/acpi/gpe.asl | 44 + .../lenovo/thinkpad_x201/acpi/nehalem_pci_irqs.asl | 86 + .../lenovo/thinkpad_x201/acpi/platform.asl | 148 ++ .../lenovo/thinkpad_x201/acpi/superio.asl | 1 + src/mainboard/lenovo/thinkpad_x201/acpi_tables.c | 97 + src/mainboard/lenovo/thinkpad_x201/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_x201/cmos.default | 18 + src/mainboard/lenovo/thinkpad_x201/cmos.layout | 157 ++ src/mainboard/lenovo/thinkpad_x201/devicetree.cb | 181 ++ src/mainboard/lenovo/thinkpad_x201/dock.c | 71 + src/mainboard/lenovo/thinkpad_x201/dock.h | 26 + src/mainboard/lenovo/thinkpad_x201/dsdt.asl | 97 + src/mainboard/lenovo/thinkpad_x201/fadt.c | 160 ++ src/mainboard/lenovo/thinkpad_x201/gpio.h | 405 +++++ src/mainboard/lenovo/thinkpad_x201/hda_verb.c | 81 + src/mainboard/lenovo/thinkpad_x201/irq_tables.c | 61 + src/mainboard/lenovo/thinkpad_x201/mainboard.c | 152 ++ src/mainboard/lenovo/thinkpad_x201/mptable.c | 82 + src/mainboard/lenovo/thinkpad_x201/romstage.c | 348 ++++ src/mainboard/lenovo/thinkpad_x201/smi.h | 26 + src/mainboard/lenovo/thinkpad_x201/smihandler.c | 222 +++ src/mainboard/lenovo/thinkpad_x220/Kconfig | 80 + src/mainboard/lenovo/thinkpad_x220/Makefile.inc | 21 + src/mainboard/lenovo/thinkpad_x220/acpi/ec.asl | 26 + src/mainboard/lenovo/thinkpad_x220/acpi/gpe.asl | 13 + .../lenovo/thinkpad_x220/acpi/platform.asl | 77 + .../thinkpad_x220/acpi/sandybridge_pci_irqs.asl | 64 + .../lenovo/thinkpad_x220/acpi/superio.asl | 1 + src/mainboard/lenovo/thinkpad_x220/acpi_tables.c | 96 + src/mainboard/lenovo/thinkpad_x220/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_x220/cmos.default | 17 + src/mainboard/lenovo/thinkpad_x220/cmos.layout | 167 ++ src/mainboard/lenovo/thinkpad_x220/devicetree.cb | 188 ++ src/mainboard/lenovo/thinkpad_x220/dsdt.asl | 60 + src/mainboard/lenovo/thinkpad_x220/fadt.c | 160 ++ src/mainboard/lenovo/thinkpad_x220/gpio.c | 380 ++++ src/mainboard/lenovo/thinkpad_x220/hda_verb.c | 97 + src/mainboard/lenovo/thinkpad_x220/mainboard.c | 88 + src/mainboard/lenovo/thinkpad_x220/romstage.c | 127 ++ src/mainboard/lenovo/thinkpad_x220/smihandler.c | 194 ++ src/mainboard/lenovo/thinkpad_x220/thermal.h | 30 + src/mainboard/lenovo/thinkpad_x230/Kconfig | 76 + src/mainboard/lenovo/thinkpad_x230/Makefile.inc | 21 + src/mainboard/lenovo/thinkpad_x230/acpi/ec.asl | 26 + src/mainboard/lenovo/thinkpad_x230/acpi/gpe.asl | 13 + .../lenovo/thinkpad_x230/acpi/platform.asl | 77 + .../thinkpad_x230/acpi/sandybridge_pci_irqs.asl | 64 + .../lenovo/thinkpad_x230/acpi/superio.asl | 1 + src/mainboard/lenovo/thinkpad_x230/acpi_tables.c | 96 + src/mainboard/lenovo/thinkpad_x230/board_info.txt | 5 + src/mainboard/lenovo/thinkpad_x230/cmos.default | 18 + src/mainboard/lenovo/thinkpad_x230/cmos.layout | 167 ++ src/mainboard/lenovo/thinkpad_x230/devicetree.cb | 187 ++ src/mainboard/lenovo/thinkpad_x230/dsdt.asl | 60 + src/mainboard/lenovo/thinkpad_x230/fadt.c | 160 ++ src/mainboard/lenovo/thinkpad_x230/gpio.c | 306 ++++ src/mainboard/lenovo/thinkpad_x230/hda_verb.c | 130 ++ src/mainboard/lenovo/thinkpad_x230/mainboard.c | 89 + src/mainboard/lenovo/thinkpad_x230/romstage.c | 130 ++ src/mainboard/lenovo/thinkpad_x230/smihandler.c | 194 ++ src/mainboard/lenovo/thinkpad_x230/thermal.h | 30 + src/mainboard/lenovo/thinkpad_x60/Kconfig | 63 + src/mainboard/lenovo/thinkpad_x60/Makefile.inc | 22 + src/mainboard/lenovo/thinkpad_x60/acpi/dock.asl | 77 + src/mainboard/lenovo/thinkpad_x60/acpi/ec.asl | 22 + src/mainboard/lenovo/thinkpad_x60/acpi/gpe.asl | 30 + .../lenovo/thinkpad_x60/acpi/i945_pci_irqs.asl | 63 + .../lenovo/thinkpad_x60/acpi/ich7_pci_irqs.asl | 46 + .../lenovo/thinkpad_x60/acpi/mainboard.asl | 0 .../lenovo/thinkpad_x60/acpi/platform.asl | 205 +++ src/mainboard/lenovo/thinkpad_x60/acpi/superio.asl | 0 src/mainboard/lenovo/thinkpad_x60/acpi/video.asl | 55 + src/mainboard/lenovo/thinkpad_x60/acpi_tables.c | 91 + src/mainboard/lenovo/thinkpad_x60/board_info.txt | 6 + src/mainboard/lenovo/thinkpad_x60/cmos.default | 21 + src/mainboard/lenovo/thinkpad_x60/cmos.layout | 160 ++ src/mainboard/lenovo/thinkpad_x60/devicetree.cb | 217 +++ src/mainboard/lenovo/thinkpad_x60/dock.c | 269 +++ src/mainboard/lenovo/thinkpad_x60/dock.h | 28 + src/mainboard/lenovo/thinkpad_x60/dsdt.asl | 61 + src/mainboard/lenovo/thinkpad_x60/fadt.c | 28 + src/mainboard/lenovo/thinkpad_x60/hda_verb.c | 7 + src/mainboard/lenovo/thinkpad_x60/irq_tables.c | 61 + src/mainboard/lenovo/thinkpad_x60/mainboard.c | 126 ++ src/mainboard/lenovo/thinkpad_x60/mptable.c | 78 + src/mainboard/lenovo/thinkpad_x60/romstage.c | 336 ++++ src/mainboard/lenovo/thinkpad_x60/smi.h | 27 + src/mainboard/lenovo/thinkpad_x60/smihandler.c | 207 +++ src/mainboard/lenovo/x200/Kconfig | 49 - src/mainboard/lenovo/x200/Makefile.inc | 20 - src/mainboard/lenovo/x200/acpi/dock.asl | 73 - src/mainboard/lenovo/x200/acpi/ec.asl | 1 - src/mainboard/lenovo/x200/acpi/gm45_pci_irqs.asl | 86 - src/mainboard/lenovo/x200/acpi/gpe.asl | 43 - src/mainboard/lenovo/x200/acpi/ich9_pci_irqs.asl | 110 -- src/mainboard/lenovo/x200/acpi/platform.asl | 206 --- src/mainboard/lenovo/x200/acpi/superio.asl | 0 src/mainboard/lenovo/x200/acpi_tables.c | 91 - src/mainboard/lenovo/x200/board_info.txt | 5 - src/mainboard/lenovo/x200/cmos.default | 15 - src/mainboard/lenovo/x200/cmos.layout | 167 -- src/mainboard/lenovo/x200/cstates.c | 41 - src/mainboard/lenovo/x200/devicetree.cb | 203 --- src/mainboard/lenovo/x200/dock.c | 65 - src/mainboard/lenovo/x200/dock.h | 26 - src/mainboard/lenovo/x200/dsdt.asl | 60 - src/mainboard/lenovo/x200/fadt.c | 158 -- src/mainboard/lenovo/x200/hda_verb.c | 51 - src/mainboard/lenovo/x200/mainboard.c | 66 - src/mainboard/lenovo/x200/mptable.c | 1 - src/mainboard/lenovo/x200/romstage.c | 212 --- src/mainboard/lenovo/x200/smihandler.c | 75 - src/mainboard/lenovo/x201/Kconfig | 56 - src/mainboard/lenovo/x201/Makefile.inc | 23 - src/mainboard/lenovo/x201/acpi/dock.asl | 79 - src/mainboard/lenovo/x201/acpi/ec.asl | 26 - src/mainboard/lenovo/x201/acpi/gpe.asl | 44 - .../lenovo/x201/acpi/nehalem_pci_irqs.asl | 86 - src/mainboard/lenovo/x201/acpi/platform.asl | 148 -- src/mainboard/lenovo/x201/acpi/superio.asl | 1 - src/mainboard/lenovo/x201/acpi_tables.c | 97 - src/mainboard/lenovo/x201/board_info.txt | 5 - src/mainboard/lenovo/x201/cmos.default | 18 - src/mainboard/lenovo/x201/cmos.layout | 157 -- src/mainboard/lenovo/x201/devicetree.cb | 181 -- src/mainboard/lenovo/x201/dock.c | 71 - src/mainboard/lenovo/x201/dock.h | 26 - src/mainboard/lenovo/x201/dsdt.asl | 97 - src/mainboard/lenovo/x201/fadt.c | 160 -- src/mainboard/lenovo/x201/gpio.h | 405 ----- src/mainboard/lenovo/x201/hda_verb.c | 81 - src/mainboard/lenovo/x201/irq_tables.c | 61 - src/mainboard/lenovo/x201/mainboard.c | 152 -- src/mainboard/lenovo/x201/mptable.c | 82 - src/mainboard/lenovo/x201/romstage.c | 348 ---- src/mainboard/lenovo/x201/smi.h | 26 - src/mainboard/lenovo/x201/smihandler.c | 222 --- src/mainboard/lenovo/x220/Kconfig | 80 - src/mainboard/lenovo/x220/Makefile.inc | 21 - src/mainboard/lenovo/x220/acpi/ec.asl | 26 - src/mainboard/lenovo/x220/acpi/gpe.asl | 13 - src/mainboard/lenovo/x220/acpi/platform.asl | 77 - .../lenovo/x220/acpi/sandybridge_pci_irqs.asl | 64 - src/mainboard/lenovo/x220/acpi/superio.asl | 1 - src/mainboard/lenovo/x220/acpi_tables.c | 96 - src/mainboard/lenovo/x220/board_info.txt | 5 - src/mainboard/lenovo/x220/cmos.default | 17 - src/mainboard/lenovo/x220/cmos.layout | 167 -- src/mainboard/lenovo/x220/devicetree.cb | 188 -- src/mainboard/lenovo/x220/dsdt.asl | 60 - src/mainboard/lenovo/x220/fadt.c | 160 -- src/mainboard/lenovo/x220/gpio.c | 380 ---- src/mainboard/lenovo/x220/hda_verb.c | 97 - src/mainboard/lenovo/x220/mainboard.c | 88 - src/mainboard/lenovo/x220/romstage.c | 127 -- src/mainboard/lenovo/x220/smihandler.c | 194 -- src/mainboard/lenovo/x220/thermal.h | 30 - src/mainboard/lenovo/x230/Kconfig | 76 - src/mainboard/lenovo/x230/Makefile.inc | 21 - src/mainboard/lenovo/x230/acpi/ec.asl | 26 - src/mainboard/lenovo/x230/acpi/gpe.asl | 13 - src/mainboard/lenovo/x230/acpi/platform.asl | 77 - .../lenovo/x230/acpi/sandybridge_pci_irqs.asl | 64 - src/mainboard/lenovo/x230/acpi/superio.asl | 1 - src/mainboard/lenovo/x230/acpi_tables.c | 96 - src/mainboard/lenovo/x230/board_info.txt | 5 - src/mainboard/lenovo/x230/cmos.default | 18 - src/mainboard/lenovo/x230/cmos.layout | 167 -- src/mainboard/lenovo/x230/devicetree.cb | 187 -- src/mainboard/lenovo/x230/dsdt.asl | 60 - src/mainboard/lenovo/x230/fadt.c | 160 -- src/mainboard/lenovo/x230/gpio.c | 306 ---- src/mainboard/lenovo/x230/hda_verb.c | 130 -- src/mainboard/lenovo/x230/mainboard.c | 89 - src/mainboard/lenovo/x230/romstage.c | 130 -- src/mainboard/lenovo/x230/smihandler.c | 194 -- src/mainboard/lenovo/x230/thermal.h | 30 - src/mainboard/lenovo/x60/Kconfig | 63 - src/mainboard/lenovo/x60/Makefile.inc | 22 - src/mainboard/lenovo/x60/acpi/dock.asl | 77 - src/mainboard/lenovo/x60/acpi/ec.asl | 22 - src/mainboard/lenovo/x60/acpi/gpe.asl | 30 - src/mainboard/lenovo/x60/acpi/i945_pci_irqs.asl | 63 - src/mainboard/lenovo/x60/acpi/ich7_pci_irqs.asl | 46 - src/mainboard/lenovo/x60/acpi/mainboard.asl | 0 src/mainboard/lenovo/x60/acpi/platform.asl | 205 --- src/mainboard/lenovo/x60/acpi/superio.asl | 0 src/mainboard/lenovo/x60/acpi/video.asl | 55 - src/mainboard/lenovo/x60/acpi_tables.c | 91 - src/mainboard/lenovo/x60/board_info.txt | 6 - src/mainboard/lenovo/x60/cmos.default | 21 - src/mainboard/lenovo/x60/cmos.layout | 160 -- src/mainboard/lenovo/x60/devicetree.cb | 217 --- src/mainboard/lenovo/x60/dock.c | 269 --- src/mainboard/lenovo/x60/dock.h | 28 - src/mainboard/lenovo/x60/dsdt.asl | 61 - src/mainboard/lenovo/x60/fadt.c | 28 - src/mainboard/lenovo/x60/hda_verb.c | 7 - src/mainboard/lenovo/x60/irq_tables.c | 61 - src/mainboard/lenovo/x60/mainboard.c | 126 -- src/mainboard/lenovo/x60/mptable.c | 78 - src/mainboard/lenovo/x60/romstage.c | 336 ---- src/mainboard/lenovo/x60/smi.h | 27 - src/mainboard/lenovo/x60/smihandler.c | 207 --- src/mainboard/linutop/Kconfig | 4 +- src/mainboard/linutop/linutop1/Kconfig | 9 - src/mainboard/linutop/linutop1/board_info.txt | 4 - src/mainboard/linutop/linutop_1/Kconfig | 9 + src/mainboard/linutop/linutop_1/board_info.txt | 4 + src/mainboard/lippert/Kconfig | 16 +- src/mainboard/lippert/cool_frontrunner/Kconfig | 27 + .../lippert/cool_frontrunner/board_info.txt | 5 + src/mainboard/lippert/cool_frontrunner/cmos.layout | 72 + .../lippert/cool_frontrunner/devicetree.cb | 21 + .../lippert/cool_frontrunner/irq_tables.c | 49 + src/mainboard/lippert/cool_frontrunner/romstage.c | 130 ++ src/mainboard/lippert/cool_literunner_lx/Kconfig | 50 + .../lippert/cool_literunner_lx/board_info.txt | 6 + .../lippert/cool_literunner_lx/devicetree.cb | 87 + .../lippert/cool_literunner_lx/irq_tables.c | 73 + .../lippert/cool_literunner_lx/mainboard.c | 91 + .../lippert/cool_literunner_lx/romstage.c | 194 ++ src/mainboard/lippert/cool_roadrunner_lx/Kconfig | 42 + .../lippert/cool_roadrunner_lx/board_info.txt | 6 + .../lippert/cool_roadrunner_lx/devicetree.cb | 89 + .../lippert/cool_roadrunner_lx/irq_tables.c | 75 + .../lippert/cool_roadrunner_lx/mainboard.c | 81 + .../lippert/cool_roadrunner_lx/romstage.c | 119 ++ src/mainboard/lippert/cool_spacerunner_lx/Kconfig | 49 + .../lippert/cool_spacerunner_lx/board_info.txt | 6 + .../lippert/cool_spacerunner_lx/devicetree.cb | 90 + .../lippert/cool_spacerunner_lx/irq_tables.c | 75 + .../lippert/cool_spacerunner_lx/mainboard.c | 86 + .../lippert/cool_spacerunner_lx/romstage.c | 192 ++ .../lippert/frontrunner-af/BiosCallOuts.c | 75 - src/mainboard/lippert/frontrunner-af/Kconfig | 99 -- src/mainboard/lippert/frontrunner-af/Makefile.inc | 35 - src/mainboard/lippert/frontrunner-af/OptionsIds.h | 64 - .../lippert/frontrunner-af/PlatformGnbPcie.c | 150 -- .../frontrunner-af/PlatformGnbPcieComplex.h | 73 - .../lippert/frontrunner-af/acpi/routing.asl | 411 ----- src/mainboard/lippert/frontrunner-af/acpi/sata.asl | 149 -- .../lippert/frontrunner-af/acpi/superio.asl | 39 - src/mainboard/lippert/frontrunner-af/acpi/usb.asl | 161 -- src/mainboard/lippert/frontrunner-af/acpi_tables.c | 268 --- .../lippert/frontrunner-af/agesawrapper.c | 625 ------- .../lippert/frontrunner-af/agesawrapper.h | 59 - .../lippert/frontrunner-af/board_info.txt | 6 - src/mainboard/lippert/frontrunner-af/buildOpts.c | 459 ----- src/mainboard/lippert/frontrunner-af/cmos.layout | 116 -- src/mainboard/lippert/frontrunner-af/devicetree.cb | 110 -- src/mainboard/lippert/frontrunner-af/dsdt.asl | 1835 ------------------- src/mainboard/lippert/frontrunner-af/irq_tables.c | 115 -- src/mainboard/lippert/frontrunner-af/mainboard.c | 192 -- src/mainboard/lippert/frontrunner-af/mptable.c | 152 -- .../lippert/frontrunner-af/platform_cfg.h | 259 --- src/mainboard/lippert/frontrunner-af/romstage.c | 119 -- src/mainboard/lippert/frontrunner/Kconfig | 27 - src/mainboard/lippert/frontrunner/board_info.txt | 5 - src/mainboard/lippert/frontrunner/cmos.layout | 72 - src/mainboard/lippert/frontrunner/devicetree.cb | 21 - src/mainboard/lippert/frontrunner/irq_tables.c | 49 - src/mainboard/lippert/frontrunner/romstage.c | 130 -- .../lippert/frontrunner_af/BiosCallOuts.c | 75 + src/mainboard/lippert/frontrunner_af/Kconfig | 99 ++ src/mainboard/lippert/frontrunner_af/Makefile.inc | 35 + src/mainboard/lippert/frontrunner_af/OptionsIds.h | 64 + .../lippert/frontrunner_af/PlatformGnbPcie.c | 150 ++ .../frontrunner_af/PlatformGnbPcieComplex.h | 73 + .../lippert/frontrunner_af/acpi/routing.asl | 411 +++++ src/mainboard/lippert/frontrunner_af/acpi/sata.asl | 149 ++ .../lippert/frontrunner_af/acpi/superio.asl | 39 + src/mainboard/lippert/frontrunner_af/acpi/usb.asl | 161 ++ src/mainboard/lippert/frontrunner_af/acpi_tables.c | 268 +++ .../lippert/frontrunner_af/agesawrapper.c | 625 +++++++ .../lippert/frontrunner_af/agesawrapper.h | 59 + .../lippert/frontrunner_af/board_info.txt | 6 + src/mainboard/lippert/frontrunner_af/buildOpts.c | 459 +++++ src/mainboard/lippert/frontrunner_af/cmos.layout | 116 ++ src/mainboard/lippert/frontrunner_af/devicetree.cb | 110 ++ src/mainboard/lippert/frontrunner_af/dsdt.asl | 1835 +++++++++++++++++++ src/mainboard/lippert/frontrunner_af/irq_tables.c | 115 ++ src/mainboard/lippert/frontrunner_af/mainboard.c | 192 ++ src/mainboard/lippert/frontrunner_af/mptable.c | 152 ++ .../lippert/frontrunner_af/platform_cfg.h | 259 +++ src/mainboard/lippert/frontrunner_af/romstage.c | 119 ++ src/mainboard/lippert/hurricane-lx/Kconfig | 56 - src/mainboard/lippert/hurricane-lx/board_info.txt | 6 - src/mainboard/lippert/hurricane-lx/devicetree.cb | 90 - src/mainboard/lippert/hurricane-lx/irq_tables.c | 76 - src/mainboard/lippert/hurricane-lx/mainboard.c | 87 - src/mainboard/lippert/hurricane-lx/romstage.c | 154 -- src/mainboard/lippert/hurricane_lx/Kconfig | 56 + src/mainboard/lippert/hurricane_lx/board_info.txt | 6 + src/mainboard/lippert/hurricane_lx/devicetree.cb | 90 + src/mainboard/lippert/hurricane_lx/irq_tables.c | 76 + src/mainboard/lippert/hurricane_lx/mainboard.c | 87 + src/mainboard/lippert/hurricane_lx/romstage.c | 154 ++ src/mainboard/lippert/literunner-lx/Kconfig | 50 - src/mainboard/lippert/literunner-lx/board_info.txt | 6 - src/mainboard/lippert/literunner-lx/devicetree.cb | 87 - src/mainboard/lippert/literunner-lx/irq_tables.c | 73 - src/mainboard/lippert/literunner-lx/mainboard.c | 91 - src/mainboard/lippert/literunner-lx/romstage.c | 194 -- src/mainboard/lippert/roadrunner-lx/Kconfig | 42 - src/mainboard/lippert/roadrunner-lx/board_info.txt | 6 - src/mainboard/lippert/roadrunner-lx/devicetree.cb | 89 - src/mainboard/lippert/roadrunner-lx/irq_tables.c | 75 - src/mainboard/lippert/roadrunner-lx/mainboard.c | 81 - src/mainboard/lippert/roadrunner-lx/romstage.c | 119 -- src/mainboard/lippert/spacerunner-lx/Kconfig | 49 - .../lippert/spacerunner-lx/board_info.txt | 6 - src/mainboard/lippert/spacerunner-lx/devicetree.cb | 90 - src/mainboard/lippert/spacerunner-lx/irq_tables.c | 75 - src/mainboard/lippert/spacerunner-lx/mainboard.c | 86 - src/mainboard/lippert/spacerunner-lx/romstage.c | 192 -- src/mainboard/lippert/toucan-af/BiosCallOuts.c | 76 - src/mainboard/lippert/toucan-af/Kconfig | 101 -- src/mainboard/lippert/toucan-af/Makefile.inc | 35 - src/mainboard/lippert/toucan-af/OptionsIds.h | 64 - src/mainboard/lippert/toucan-af/PlatformGnbPcie.c | 150 -- .../lippert/toucan-af/PlatformGnbPcieComplex.h | 73 - src/mainboard/lippert/toucan-af/acpi/routing.asl | 407 ----- src/mainboard/lippert/toucan-af/acpi/sata.asl | 149 -- src/mainboard/lippert/toucan-af/acpi/superio.asl | 39 - src/mainboard/lippert/toucan-af/acpi/usb.asl | 161 -- src/mainboard/lippert/toucan-af/acpi_tables.c | 268 --- src/mainboard/lippert/toucan-af/agesawrapper.c | 625 ------- src/mainboard/lippert/toucan-af/agesawrapper.h | 59 - src/mainboard/lippert/toucan-af/board_info.txt | 6 - src/mainboard/lippert/toucan-af/buildOpts.c | 459 ----- src/mainboard/lippert/toucan-af/cmos.layout | 116 -- src/mainboard/lippert/toucan-af/devicetree.cb | 116 -- src/mainboard/lippert/toucan-af/dsdt.asl | 1834 ------------------- src/mainboard/lippert/toucan-af/irq_tables.c | 115 -- src/mainboard/lippert/toucan-af/mainboard.c | 159 -- src/mainboard/lippert/toucan-af/mptable.c | 152 -- src/mainboard/lippert/toucan-af/platform_cfg.h | 259 --- src/mainboard/lippert/toucan-af/romstage.c | 120 -- src/mainboard/lippert/toucan_af/BiosCallOuts.c | 76 + src/mainboard/lippert/toucan_af/Kconfig | 101 ++ src/mainboard/lippert/toucan_af/Makefile.inc | 35 + src/mainboard/lippert/toucan_af/OptionsIds.h | 64 + src/mainboard/lippert/toucan_af/PlatformGnbPcie.c | 150 ++ .../lippert/toucan_af/PlatformGnbPcieComplex.h | 73 + src/mainboard/lippert/toucan_af/acpi/routing.asl | 407 +++++ src/mainboard/lippert/toucan_af/acpi/sata.asl | 149 ++ src/mainboard/lippert/toucan_af/acpi/superio.asl | 39 + src/mainboard/lippert/toucan_af/acpi/usb.asl | 161 ++ src/mainboard/lippert/toucan_af/acpi_tables.c | 268 +++ src/mainboard/lippert/toucan_af/agesawrapper.c | 625 +++++++ src/mainboard/lippert/toucan_af/agesawrapper.h | 59 + src/mainboard/lippert/toucan_af/board_info.txt | 6 + src/mainboard/lippert/toucan_af/buildOpts.c | 459 +++++ src/mainboard/lippert/toucan_af/cmos.layout | 116 ++ src/mainboard/lippert/toucan_af/devicetree.cb | 116 ++ src/mainboard/lippert/toucan_af/dsdt.asl | 1834 +++++++++++++++++++ src/mainboard/lippert/toucan_af/irq_tables.c | 115 ++ src/mainboard/lippert/toucan_af/mainboard.c | 159 ++ src/mainboard/lippert/toucan_af/mptable.c | 152 ++ src/mainboard/lippert/toucan_af/platform_cfg.h | 259 +++ src/mainboard/lippert/toucan_af/romstage.c | 120 ++ src/mainboard/msi/Kconfig | 28 +- src/mainboard/msi/ms6119/Kconfig | 43 - src/mainboard/msi/ms6119/board_info.txt | 4 - src/mainboard/msi/ms6119/devicetree.cb | 60 - src/mainboard/msi/ms6119/irq_tables.c | 50 - src/mainboard/msi/ms6119/romstage.c | 56 - src/mainboard/msi/ms6147/Kconfig | 43 - src/mainboard/msi/ms6147/board_info.txt | 5 - src/mainboard/msi/ms6147/devicetree.cb | 60 - src/mainboard/msi/ms6147/irq_tables.c | 51 - src/mainboard/msi/ms6147/romstage.c | 56 - src/mainboard/msi/ms6156/Kconfig | 43 - src/mainboard/msi/ms6156/board_info.txt | 6 - src/mainboard/msi/ms6156/devicetree.cb | 81 - src/mainboard/msi/ms6156/irq_tables.c | 50 - src/mainboard/msi/ms6156/romstage.c | 56 - src/mainboard/msi/ms6178/Kconfig | 47 - src/mainboard/msi/ms6178/board_info.txt | 4 - src/mainboard/msi/ms6178/devicetree.cb | 84 - src/mainboard/msi/ms6178/irq_tables.c | 47 - src/mainboard/msi/ms6178/romstage.c | 52 - src/mainboard/msi/ms7135/Kconfig | 58 - src/mainboard/msi/ms7135/acpi_tables.c | 63 - src/mainboard/msi/ms7135/board_info.txt | 7 - src/mainboard/msi/ms7135/cmos.layout | 108 -- src/mainboard/msi/ms7135/devicetree.cb | 75 - src/mainboard/msi/ms7135/dsdt.asl | 269 --- src/mainboard/msi/ms7135/get_bus_conf.c | 107 -- src/mainboard/msi/ms7135/irq_tables.c | 262 --- src/mainboard/msi/ms7135/mptable.c | 160 -- src/mainboard/msi/ms7135/romstage.c | 172 -- src/mainboard/msi/ms7260/Kconfig | 78 - src/mainboard/msi/ms7260/board_info.txt | 6 - src/mainboard/msi/ms7260/cmos.layout | 118 -- src/mainboard/msi/ms7260/devicetree.cb | 143 -- src/mainboard/msi/ms7260/get_bus_conf.c | 126 -- src/mainboard/msi/ms7260/irq_tables.c | 109 -- src/mainboard/msi/ms7260/mainboard.c | 33 - src/mainboard/msi/ms7260/mptable.c | 110 -- src/mainboard/msi/ms7260/resourcemap.c | 283 --- src/mainboard/msi/ms7260/romstage.c | 202 --- src/mainboard/msi/ms9185/Kconfig | 65 - src/mainboard/msi/ms9185/board_info.txt | 3 - src/mainboard/msi/ms9185/cmos.layout | 96 - src/mainboard/msi/ms9185/devicetree.cb | 87 - src/mainboard/msi/ms9185/get_bus_conf.c | 137 -- src/mainboard/msi/ms9185/irq_tables.c | 126 -- src/mainboard/msi/ms9185/mb_sysconf.h | 37 - src/mainboard/msi/ms9185/mptable.c | 161 -- src/mainboard/msi/ms9185/resourcemap.c | 290 --- src/mainboard/msi/ms9185/romstage.c | 211 --- src/mainboard/msi/ms9282/Kconfig | 68 - src/mainboard/msi/ms9282/board_info.txt | 3 - src/mainboard/msi/ms9282/cmos.layout | 96 - src/mainboard/msi/ms9282/devicetree.cb | 182 -- src/mainboard/msi/ms9282/get_bus_conf.c | 130 -- src/mainboard/msi/ms9282/irq_tables.c | 132 -- src/mainboard/msi/ms9282/mainboard.c | 35 - src/mainboard/msi/ms9282/mb_sysconf.h | 33 - src/mainboard/msi/ms9282/mptable.c | 130 -- src/mainboard/msi/ms9282/resourcemap.c | 298 ---- src/mainboard/msi/ms9282/romstage.c | 170 -- src/mainboard/msi/ms9652_fam10/Kconfig | 116 -- src/mainboard/msi/ms9652_fam10/acpi_tables.c | 201 --- src/mainboard/msi/ms9652_fam10/board_info.txt | 1 - src/mainboard/msi/ms9652_fam10/cmos.layout | 117 -- src/mainboard/msi/ms9652_fam10/devicetree.cb | 169 -- src/mainboard/msi/ms9652_fam10/dsdt.asl | 302 ---- src/mainboard/msi/ms9652_fam10/get_bus_conf.c | 127 -- src/mainboard/msi/ms9652_fam10/irq_tables.c | 138 -- src/mainboard/msi/ms9652_fam10/mainboard.c | 35 - src/mainboard/msi/ms9652_fam10/mb_sysconf.h | 30 - src/mainboard/msi/ms9652_fam10/mptable.c | 119 -- src/mainboard/msi/ms9652_fam10/resourcemap.c | 286 --- src/mainboard/msi/ms9652_fam10/romstage.c | 272 --- src/mainboard/msi/ms_6119/Kconfig | 43 + src/mainboard/msi/ms_6119/board_info.txt | 4 + src/mainboard/msi/ms_6119/devicetree.cb | 60 + src/mainboard/msi/ms_6119/irq_tables.c | 50 + src/mainboard/msi/ms_6119/romstage.c | 56 + src/mainboard/msi/ms_6147/Kconfig | 43 + src/mainboard/msi/ms_6147/board_info.txt | 5 + src/mainboard/msi/ms_6147/devicetree.cb | 60 + src/mainboard/msi/ms_6147/irq_tables.c | 51 + src/mainboard/msi/ms_6147/romstage.c | 56 + src/mainboard/msi/ms_6156/Kconfig | 43 + src/mainboard/msi/ms_6156/board_info.txt | 6 + src/mainboard/msi/ms_6156/devicetree.cb | 81 + src/mainboard/msi/ms_6156/irq_tables.c | 50 + src/mainboard/msi/ms_6156/romstage.c | 56 + src/mainboard/msi/ms_6178/Kconfig | 47 + src/mainboard/msi/ms_6178/board_info.txt | 4 + src/mainboard/msi/ms_6178/devicetree.cb | 84 + src/mainboard/msi/ms_6178/irq_tables.c | 47 + src/mainboard/msi/ms_6178/romstage.c | 52 + src/mainboard/msi/ms_7135/Kconfig | 58 + src/mainboard/msi/ms_7135/acpi_tables.c | 63 + src/mainboard/msi/ms_7135/board_info.txt | 7 + src/mainboard/msi/ms_7135/cmos.layout | 108 ++ src/mainboard/msi/ms_7135/devicetree.cb | 75 + src/mainboard/msi/ms_7135/dsdt.asl | 269 +++ src/mainboard/msi/ms_7135/get_bus_conf.c | 107 ++ src/mainboard/msi/ms_7135/irq_tables.c | 262 +++ src/mainboard/msi/ms_7135/mptable.c | 160 ++ src/mainboard/msi/ms_7135/romstage.c | 172 ++ src/mainboard/msi/ms_7260/Kconfig | 78 + src/mainboard/msi/ms_7260/board_info.txt | 6 + src/mainboard/msi/ms_7260/cmos.layout | 118 ++ src/mainboard/msi/ms_7260/devicetree.cb | 143 ++ src/mainboard/msi/ms_7260/get_bus_conf.c | 126 ++ src/mainboard/msi/ms_7260/irq_tables.c | 109 ++ src/mainboard/msi/ms_7260/mainboard.c | 33 + src/mainboard/msi/ms_7260/mptable.c | 110 ++ src/mainboard/msi/ms_7260/resourcemap.c | 283 +++ src/mainboard/msi/ms_7260/romstage.c | 202 +++ src/mainboard/msi/ms_9185/Kconfig | 65 + src/mainboard/msi/ms_9185/board_info.txt | 3 + src/mainboard/msi/ms_9185/cmos.layout | 96 + src/mainboard/msi/ms_9185/devicetree.cb | 87 + src/mainboard/msi/ms_9185/get_bus_conf.c | 137 ++ src/mainboard/msi/ms_9185/irq_tables.c | 126 ++ src/mainboard/msi/ms_9185/mb_sysconf.h | 37 + src/mainboard/msi/ms_9185/mptable.c | 161 ++ src/mainboard/msi/ms_9185/resourcemap.c | 290 +++ src/mainboard/msi/ms_9185/romstage.c | 211 +++ src/mainboard/msi/ms_9282/Kconfig | 68 + src/mainboard/msi/ms_9282/board_info.txt | 3 + src/mainboard/msi/ms_9282/cmos.layout | 96 + src/mainboard/msi/ms_9282/devicetree.cb | 182 ++ src/mainboard/msi/ms_9282/get_bus_conf.c | 130 ++ src/mainboard/msi/ms_9282/irq_tables.c | 132 ++ src/mainboard/msi/ms_9282/mainboard.c | 35 + src/mainboard/msi/ms_9282/mb_sysconf.h | 33 + src/mainboard/msi/ms_9282/mptable.c | 130 ++ src/mainboard/msi/ms_9282/resourcemap.c | 298 ++++ src/mainboard/msi/ms_9282/romstage.c | 170 ++ src/mainboard/msi/ms_9652/Kconfig | 116 ++ src/mainboard/msi/ms_9652/acpi_tables.c | 201 +++ src/mainboard/msi/ms_9652/board_info.txt | 1 + src/mainboard/msi/ms_9652/cmos.layout | 117 ++ src/mainboard/msi/ms_9652/devicetree.cb | 169 ++ src/mainboard/msi/ms_9652/dsdt.asl | 302 ++++ src/mainboard/msi/ms_9652/get_bus_conf.c | 127 ++ src/mainboard/msi/ms_9652/irq_tables.c | 138 ++ src/mainboard/msi/ms_9652/mainboard.c | 35 + src/mainboard/msi/ms_9652/mb_sysconf.h | 30 + src/mainboard/msi/ms_9652/mptable.c | 119 ++ src/mainboard/msi/ms_9652/resourcemap.c | 286 +++ src/mainboard/msi/ms_9652/romstage.c | 272 +++ src/mainboard/nec/Kconfig | 2 +- src/mainboard/nec/powermate2000/Kconfig | 43 - src/mainboard/nec/powermate2000/board_info.txt | 4 - src/mainboard/nec/powermate2000/devicetree.cb | 54 - src/mainboard/nec/powermate2000/irq_tables.c | 48 - src/mainboard/nec/powermate2000/romstage.c | 48 - src/mainboard/nec/powermate_2000/Kconfig | 43 + src/mainboard/nec/powermate_2000/board_info.txt | 4 + src/mainboard/nec/powermate_2000/devicetree.cb | 54 + src/mainboard/nec/powermate_2000/irq_tables.c | 48 + src/mainboard/nec/powermate_2000/romstage.c | 48 + src/mainboard/packard_bell/Kconfig | 4 +- src/mainboard/packard_bell/easynote_lm85/Kconfig | 61 + .../packard_bell/easynote_lm85/Makefile.inc | 20 + .../packard_bell/easynote_lm85/acpi/ac.asl | 49 + .../packard_bell/easynote_lm85/acpi/battery.asl | 155 ++ .../packard_bell/easynote_lm85/acpi/ec.asl | 136 ++ .../packard_bell/easynote_lm85/acpi/gpe.asl | 24 + .../easynote_lm85/acpi/nehalem_pci_irqs.asl | 86 + .../packard_bell/easynote_lm85/acpi/platform.asl | 146 ++ .../packard_bell/easynote_lm85/acpi/superio.asl | 1 + .../packard_bell/easynote_lm85/acpi/thermal.asl | 48 + .../packard_bell/easynote_lm85/acpi_tables.c | 97 + .../packard_bell/easynote_lm85/board_info.txt | 6 + .../packard_bell/easynote_lm85/cmos.default | 7 + .../packard_bell/easynote_lm85/cmos.layout | 138 ++ .../packard_bell/easynote_lm85/devicetree.cb | 104 ++ src/mainboard/packard_bell/easynote_lm85/dsdt.asl | 88 + src/mainboard/packard_bell/easynote_lm85/fadt.c | 160 ++ .../packard_bell/easynote_lm85/hda_verb.c | 66 + .../packard_bell/easynote_lm85/mainboard.c | 136 ++ .../packard_bell/easynote_lm85/romstage.c | 330 ++++ .../packard_bell/easynote_lm85/smihandler.c | 112 ++ src/mainboard/packard_bell/ms2290/Kconfig | 61 - src/mainboard/packard_bell/ms2290/Makefile.inc | 20 - src/mainboard/packard_bell/ms2290/acpi/ac.asl | 49 - src/mainboard/packard_bell/ms2290/acpi/battery.asl | 155 -- src/mainboard/packard_bell/ms2290/acpi/ec.asl | 136 -- src/mainboard/packard_bell/ms2290/acpi/gpe.asl | 24 - .../packard_bell/ms2290/acpi/nehalem_pci_irqs.asl | 86 - .../packard_bell/ms2290/acpi/platform.asl | 146 -- src/mainboard/packard_bell/ms2290/acpi/superio.asl | 1 - src/mainboard/packard_bell/ms2290/acpi/thermal.asl | 48 - src/mainboard/packard_bell/ms2290/acpi_tables.c | 97 - src/mainboard/packard_bell/ms2290/board_info.txt | 6 - src/mainboard/packard_bell/ms2290/cmos.default | 7 - src/mainboard/packard_bell/ms2290/cmos.layout | 138 -- src/mainboard/packard_bell/ms2290/devicetree.cb | 104 -- src/mainboard/packard_bell/ms2290/dsdt.asl | 88 - src/mainboard/packard_bell/ms2290/fadt.c | 160 -- src/mainboard/packard_bell/ms2290/hda_verb.c | 66 - src/mainboard/packard_bell/ms2290/mainboard.c | 136 -- src/mainboard/packard_bell/ms2290/romstage.c | 330 ---- src/mainboard/packard_bell/ms2290/smihandler.c | 112 -- src/mainboard/pc_engines/Kconfig | 16 +- src/mainboard/pc_engines/alix1c/Kconfig | 29 - src/mainboard/pc_engines/alix1c/board_info.txt | 5 - src/mainboard/pc_engines/alix1c/cmos.default | 11 - src/mainboard/pc_engines/alix1c/cmos.layout | 72 - src/mainboard/pc_engines/alix1c/devicetree.cb | 86 - src/mainboard/pc_engines/alix1c/irq_tables.c | 110 -- src/mainboard/pc_engines/alix1c/mainboard.c | 36 - src/mainboard/pc_engines/alix1c/romstage.c | 169 -- src/mainboard/pc_engines/alix2c/Kconfig | 9 - src/mainboard/pc_engines/alix2c/board_info.txt | 4 - src/mainboard/pc_engines/alix2d/Kconfig | 30 - src/mainboard/pc_engines/alix2d/board_info.txt | 3 - src/mainboard/pc_engines/alix2d/cmos.layout | 72 - src/mainboard/pc_engines/alix2d/devicetree.cb | 46 - src/mainboard/pc_engines/alix2d/irq_tables.c | 117 -- src/mainboard/pc_engines/alix2d/mainboard.c | 36 - src/mainboard/pc_engines/alix2d/romstage.c | 192 -- src/mainboard/pc_engines/alix6/Kconfig | 9 - src/mainboard/pc_engines/alix6/board_info.txt | 5 - src/mainboard/pc_engines/alix_1c/Kconfig | 29 + src/mainboard/pc_engines/alix_1c/board_info.txt | 5 + src/mainboard/pc_engines/alix_1c/cmos.default | 11 + src/mainboard/pc_engines/alix_1c/cmos.layout | 72 + src/mainboard/pc_engines/alix_1c/devicetree.cb | 86 + src/mainboard/pc_engines/alix_1c/irq_tables.c | 110 ++ src/mainboard/pc_engines/alix_1c/mainboard.c | 36 + src/mainboard/pc_engines/alix_1c/romstage.c | 169 ++ src/mainboard/pc_engines/alix_2c/Kconfig | 9 + src/mainboard/pc_engines/alix_2c/board_info.txt | 4 + src/mainboard/pc_engines/alix_2d/Kconfig | 30 + src/mainboard/pc_engines/alix_2d/board_info.txt | 3 + src/mainboard/pc_engines/alix_2d/cmos.layout | 72 + src/mainboard/pc_engines/alix_2d/devicetree.cb | 46 + src/mainboard/pc_engines/alix_2d/irq_tables.c | 117 ++ src/mainboard/pc_engines/alix_2d/mainboard.c | 36 + src/mainboard/pc_engines/alix_2d/romstage.c | 192 ++ src/mainboard/pc_engines/alix_6/Kconfig | 9 + src/mainboard/pc_engines/alix_6/board_info.txt | 5 + src/mainboard/siemens/Kconfig | 4 +- .../siemens/mb_sitemp_g1_u1p0_u1p1/Kconfig | 74 + .../siemens/mb_sitemp_g1_u1p0_u1p1/Makefile.inc | 22 + .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi/debug.asl | 198 +++ .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi/event.asl | 316 ++++ .../mb_sitemp_g1_u1p0_u1p1/acpi/globutil.asl | 218 +++ .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi/ide.asl | 249 +++ .../mb_sitemp_g1_u1p0_u1p1/acpi/platform.asl | 66 + .../mb_sitemp_g1_u1p0_u1p1/acpi/routing.asl | 178 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi/sata.asl | 149 ++ .../mb_sitemp_g1_u1p0_u1p1/acpi/statdef.asl | 91 + .../mb_sitemp_g1_u1p0_u1p1/acpi/thermal.asl | 99 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi/usb.asl | 154 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/acpi_tables.c | 109 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/board_info.txt | 1 + .../siemens/mb_sitemp_g1_u1p0_u1p1/cmos.default | 24 + .../siemens/mb_sitemp_g1_u1p0_u1p1/cmos.layout | 206 +++ .../siemens/mb_sitemp_g1_u1p0_u1p1/devicetree.cb | 135 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/dsdt.asl | 1313 ++++++++++++++ .../siemens/mb_sitemp_g1_u1p0_u1p1/fadt.c | 202 +++ .../siemens/mb_sitemp_g1_u1p0_u1p1/get_bus_conf.c | 116 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.c | 112 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.h | 35 + .../siemens/mb_sitemp_g1_u1p0_u1p1/irq_tables.c | 138 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.c | 855 +++++++++ .../siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.h | 1 + .../siemens/mb_sitemp_g1_u1p0_u1p1/mptable.c | 130 ++ .../siemens/mb_sitemp_g1_u1p0_u1p1/resourcemap.c | 278 +++ .../siemens/mb_sitemp_g1_u1p0_u1p1/romstage.c | 194 ++ src/mainboard/siemens/sitemp_g1p1/Kconfig | 74 - src/mainboard/siemens/sitemp_g1p1/Makefile.inc | 22 - src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl | 198 --- src/mainboard/siemens/sitemp_g1p1/acpi/event.asl | 316 ---- .../siemens/sitemp_g1p1/acpi/globutil.asl | 218 --- src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl | 249 --- .../siemens/sitemp_g1p1/acpi/platform.asl | 66 - src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl | 178 -- src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl | 149 -- src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl | 91 - src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl | 99 -- src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl | 154 -- src/mainboard/siemens/sitemp_g1p1/acpi_tables.c | 109 -- src/mainboard/siemens/sitemp_g1p1/board_info.txt | 1 - src/mainboard/siemens/sitemp_g1p1/cmos.default | 24 - src/mainboard/siemens/sitemp_g1p1/cmos.layout | 206 --- src/mainboard/siemens/sitemp_g1p1/devicetree.cb | 135 -- src/mainboard/siemens/sitemp_g1p1/dsdt.asl | 1313 -------------- src/mainboard/siemens/sitemp_g1p1/fadt.c | 202 --- src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c | 116 -- src/mainboard/siemens/sitemp_g1p1/int15_func.c | 112 -- src/mainboard/siemens/sitemp_g1p1/int15_func.h | 35 - src/mainboard/siemens/sitemp_g1p1/irq_tables.c | 138 -- src/mainboard/siemens/sitemp_g1p1/mainboard.c | 855 --------- src/mainboard/siemens/sitemp_g1p1/mainboard.h | 1 - src/mainboard/siemens/sitemp_g1p1/mptable.c | 130 -- src/mainboard/siemens/sitemp_g1p1/resourcemap.c | 278 --- src/mainboard/siemens/sitemp_g1p1/romstage.c | 194 -- src/mainboard/soyo/Kconfig | 2 +- src/mainboard/soyo/sy-6ba-plus-iii/Kconfig | 43 - src/mainboard/soyo/sy-6ba-plus-iii/board_info.txt | 5 - src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb | 73 - src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c | 53 - src/mainboard/soyo/sy-6ba-plus-iii/romstage.c | 55 - src/mainboard/soyo/sy_6ba_plus_iii/Kconfig | 43 + src/mainboard/soyo/sy_6ba_plus_iii/board_info.txt | 5 + src/mainboard/soyo/sy_6ba_plus_iii/devicetree.cb | 73 + src/mainboard/soyo/sy_6ba_plus_iii/irq_tables.c | 53 + src/mainboard/soyo/sy_6ba_plus_iii/romstage.c | 55 + src/mainboard/sun/Kconfig | 4 +- src/mainboard/sun/ultra40/Kconfig | 66 - src/mainboard/sun/ultra40/board_info.txt | 2 - src/mainboard/sun/ultra40/cmos.layout | 96 - src/mainboard/sun/ultra40/devicetree.cb | 151 -- src/mainboard/sun/ultra40/get_bus_conf.c | 279 --- src/mainboard/sun/ultra40/irq_tables.c | 181 -- src/mainboard/sun/ultra40/mptable.c | 197 --- src/mainboard/sun/ultra40/resourcemap.c | 265 --- src/mainboard/sun/ultra40/romstage.c | 152 -- src/mainboard/sun/ultra_40/Kconfig | 66 + src/mainboard/sun/ultra_40/board_info.txt | 2 + src/mainboard/sun/ultra_40/cmos.layout | 96 + src/mainboard/sun/ultra_40/devicetree.cb | 151 ++ src/mainboard/sun/ultra_40/get_bus_conf.c | 279 +++ src/mainboard/sun/ultra_40/irq_tables.c | 181 ++ src/mainboard/sun/ultra_40/mptable.c | 197 +++ src/mainboard/sun/ultra_40/resourcemap.c | 265 +++ src/mainboard/sun/ultra_40/romstage.c | 152 ++ src/mainboard/supermicro/Kconfig | 20 +- src/mainboard/supermicro/h8dme/Kconfig | 71 - src/mainboard/supermicro/h8dme/board_info.txt | 2 - src/mainboard/supermicro/h8dme/cmos.layout | 117 -- src/mainboard/supermicro/h8dme/devicetree.cb | 126 -- src/mainboard/supermicro/h8dme/get_bus_conf.c | 152 -- src/mainboard/supermicro/h8dme/irq_tables.c | 119 -- src/mainboard/supermicro/h8dme/mptable.c | 132 -- src/mainboard/supermicro/h8dme/resourcemap.c | 282 --- src/mainboard/supermicro/h8dme/romstage.c | 220 --- src/mainboard/supermicro/h8dme_2/Kconfig | 71 + src/mainboard/supermicro/h8dme_2/board_info.txt | 2 + src/mainboard/supermicro/h8dme_2/cmos.layout | 117 ++ src/mainboard/supermicro/h8dme_2/devicetree.cb | 126 ++ src/mainboard/supermicro/h8dme_2/get_bus_conf.c | 152 ++ src/mainboard/supermicro/h8dme_2/irq_tables.c | 119 ++ src/mainboard/supermicro/h8dme_2/mptable.c | 132 ++ src/mainboard/supermicro/h8dme_2/resourcemap.c | 282 +++ src/mainboard/supermicro/h8dme_2/romstage.c | 220 +++ src/mainboard/supermicro/h8dmr/Kconfig | 70 - src/mainboard/supermicro/h8dmr/board_info.txt | 2 - src/mainboard/supermicro/h8dmr/cmos.layout | 117 -- src/mainboard/supermicro/h8dmr/devicetree.cb | 146 -- src/mainboard/supermicro/h8dmr/get_bus_conf.c | 152 -- src/mainboard/supermicro/h8dmr/irq_tables.c | 119 -- src/mainboard/supermicro/h8dmr/mptable.c | 133 -- src/mainboard/supermicro/h8dmr/resourcemap.c | 282 --- src/mainboard/supermicro/h8dmr/romstage.c | 189 -- src/mainboard/supermicro/h8dmr_fam10/Kconfig | 83 - src/mainboard/supermicro/h8dmr_fam10/README | 23 - .../supermicro/h8dmr_fam10/board_info.txt | 1 - src/mainboard/supermicro/h8dmr_fam10/cmos.layout | 117 -- src/mainboard/supermicro/h8dmr_fam10/devicetree.cb | 152 -- .../supermicro/h8dmr_fam10/get_bus_conf.c | 125 -- src/mainboard/supermicro/h8dmr_fam10/irq_tables.c | 138 -- src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h | 30 - src/mainboard/supermicro/h8dmr_fam10/mptable.c | 119 -- src/mainboard/supermicro/h8dmr_fam10/resourcemap.c | 285 --- src/mainboard/supermicro/h8dmr_fam10/romstage.c | 269 --- src/mainboard/supermicro/h8dmr_i2/Kconfig | 70 + src/mainboard/supermicro/h8dmr_i2/board_info.txt | 2 + src/mainboard/supermicro/h8dmr_i2/cmos.layout | 117 ++ src/mainboard/supermicro/h8dmr_i2/devicetree.cb | 146 ++ src/mainboard/supermicro/h8dmr_i2/get_bus_conf.c | 152 ++ src/mainboard/supermicro/h8dmr_i2/irq_tables.c | 119 ++ src/mainboard/supermicro/h8dmr_i2/mptable.c | 133 ++ src/mainboard/supermicro/h8dmr_i2/resourcemap.c | 282 +++ src/mainboard/supermicro/h8dmr_i2/romstage.c | 189 ++ src/mainboard/supermicro/h8dmr_i2_fam10/Kconfig | 83 + src/mainboard/supermicro/h8dmr_i2_fam10/README | 23 + .../supermicro/h8dmr_i2_fam10/board_info.txt | 1 + .../supermicro/h8dmr_i2_fam10/cmos.layout | 117 ++ .../supermicro/h8dmr_i2_fam10/devicetree.cb | 152 ++ .../supermicro/h8dmr_i2_fam10/get_bus_conf.c | 125 ++ .../supermicro/h8dmr_i2_fam10/irq_tables.c | 138 ++ .../supermicro/h8dmr_i2_fam10/mb_sysconf.h | 30 + src/mainboard/supermicro/h8dmr_i2_fam10/mptable.c | 119 ++ .../supermicro/h8dmr_i2_fam10/resourcemap.c | 285 +++ src/mainboard/supermicro/h8dmr_i2_fam10/romstage.c | 269 +++ .../supermicro/h8qme_2_plus_fam10/Kconfig | 81 + .../supermicro/h8qme_2_plus_fam10/board_info.txt | 2 + .../supermicro/h8qme_2_plus_fam10/cmos.layout | 117 ++ .../supermicro/h8qme_2_plus_fam10/devicetree.cb | 115 ++ .../supermicro/h8qme_2_plus_fam10/get_bus_conf.c | 143 ++ .../supermicro/h8qme_2_plus_fam10/irq_tables.c | 138 ++ .../supermicro/h8qme_2_plus_fam10/mb_sysconf.h | 36 + .../supermicro/h8qme_2_plus_fam10/mptable.c | 117 ++ .../supermicro/h8qme_2_plus_fam10/resourcemap.c | 285 +++ .../supermicro/h8qme_2_plus_fam10/romstage.c | 333 ++++ src/mainboard/supermicro/h8qme_fam10/Kconfig | 81 - .../supermicro/h8qme_fam10/board_info.txt | 2 - src/mainboard/supermicro/h8qme_fam10/cmos.layout | 117 -- src/mainboard/supermicro/h8qme_fam10/devicetree.cb | 115 -- .../supermicro/h8qme_fam10/get_bus_conf.c | 143 -- src/mainboard/supermicro/h8qme_fam10/irq_tables.c | 138 -- src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h | 36 - src/mainboard/supermicro/h8qme_fam10/mptable.c | 117 -- src/mainboard/supermicro/h8qme_fam10/resourcemap.c | 285 --- src/mainboard/supermicro/h8qme_fam10/romstage.c | 333 ---- src/mainboard/supermicro/x7db8/Kconfig | 43 - src/mainboard/supermicro/x7db8/board_info.txt | 5 - src/mainboard/supermicro/x7db8/cmos.layout | 140 -- src/mainboard/supermicro/x7db8/devicetree.cb | 182 -- src/mainboard/supermicro/x7db8/irq_tables.c | 57 - src/mainboard/supermicro/x7db8/mainboard.c | 36 - src/mainboard/supermicro/x7db8/romstage.c | 150 -- .../supermicro/x7db8___x7db8_plus/Kconfig | 43 + .../supermicro/x7db8___x7db8_plus/board_info.txt | 5 + .../supermicro/x7db8___x7db8_plus/cmos.layout | 140 ++ .../supermicro/x7db8___x7db8_plus/devicetree.cb | 182 ++ .../supermicro/x7db8___x7db8_plus/irq_tables.c | 57 + .../supermicro/x7db8___x7db8_plus/mainboard.c | 36 + .../supermicro/x7db8___x7db8_plus/romstage.c | 150 ++ src/mainboard/technexion/Kconfig | 8 +- src/mainboard/technexion/tim5690/Kconfig | 60 - src/mainboard/technexion/tim5690/Makefile.inc | 26 - src/mainboard/technexion/tim5690/acpi/ide.asl | 244 --- src/mainboard/technexion/tim5690/acpi/routing.asl | 258 --- src/mainboard/technexion/tim5690/acpi/sata.asl | 149 -- src/mainboard/technexion/tim5690/acpi/usb.asl | 162 -- src/mainboard/technexion/tim5690/acpi_tables.c | 58 - src/mainboard/technexion/tim5690/board_info.txt | 2 - src/mainboard/technexion/tim5690/cmos.layout | 117 -- src/mainboard/technexion/tim5690/devicetree.cb | 113 -- src/mainboard/technexion/tim5690/dsdt.asl | 1792 ------------------- src/mainboard/technexion/tim5690/fadt.c | 201 --- src/mainboard/technexion/tim5690/get_bus_conf.c | 116 -- src/mainboard/technexion/tim5690/irq_tables.c | 118 -- src/mainboard/technexion/tim5690/mainboard.c | 261 --- src/mainboard/technexion/tim5690/mptable.c | 113 -- src/mainboard/technexion/tim5690/resourcemap.c | 278 --- src/mainboard/technexion/tim5690/romstage.c | 168 -- src/mainboard/technexion/tim5690/speaker.c | 91 - src/mainboard/technexion/tim5690/speaker.h | 25 - src/mainboard/technexion/tim5690/tn_post_code.c | 227 --- src/mainboard/technexion/tim5690/tn_post_code.h | 33 - src/mainboard/technexion/tim5690/vgabios.c | 79 - src/mainboard/technexion/tim5690/vgabios.h | 37 - src/mainboard/technexion/tim8690/Kconfig | 55 - src/mainboard/technexion/tim8690/acpi/ide.asl | 244 --- src/mainboard/technexion/tim8690/acpi/routing.asl | 258 --- src/mainboard/technexion/tim8690/acpi/sata.asl | 149 -- src/mainboard/technexion/tim8690/acpi/usb.asl | 161 -- src/mainboard/technexion/tim8690/acpi_tables.c | 58 - src/mainboard/technexion/tim8690/board_info.txt | 2 - src/mainboard/technexion/tim8690/cmos.layout | 117 -- src/mainboard/technexion/tim8690/devicetree.cb | 116 -- src/mainboard/technexion/tim8690/dsdt.asl | 1792 ------------------- src/mainboard/technexion/tim8690/fadt.c | 201 --- src/mainboard/technexion/tim8690/get_bus_conf.c | 116 -- src/mainboard/technexion/tim8690/irq_tables.c | 118 -- src/mainboard/technexion/tim8690/mainboard.c | 153 -- src/mainboard/technexion/tim8690/mptable.c | 113 -- src/mainboard/technexion/tim8690/resourcemap.c | 278 --- src/mainboard/technexion/tim8690/romstage.c | 154 -- src/mainboard/technexion/tim_5690/Kconfig | 60 + src/mainboard/technexion/tim_5690/Makefile.inc | 26 + src/mainboard/technexion/tim_5690/acpi/ide.asl | 244 +++ src/mainboard/technexion/tim_5690/acpi/routing.asl | 258 +++ src/mainboard/technexion/tim_5690/acpi/sata.asl | 149 ++ src/mainboard/technexion/tim_5690/acpi/usb.asl | 162 ++ src/mainboard/technexion/tim_5690/acpi_tables.c | 58 + src/mainboard/technexion/tim_5690/board_info.txt | 2 + src/mainboard/technexion/tim_5690/cmos.layout | 117 ++ src/mainboard/technexion/tim_5690/devicetree.cb | 113 ++ src/mainboard/technexion/tim_5690/dsdt.asl | 1792 +++++++++++++++++++ src/mainboard/technexion/tim_5690/fadt.c | 201 +++ src/mainboard/technexion/tim_5690/get_bus_conf.c | 116 ++ src/mainboard/technexion/tim_5690/irq_tables.c | 118 ++ src/mainboard/technexion/tim_5690/mainboard.c | 261 +++ src/mainboard/technexion/tim_5690/mptable.c | 113 ++ src/mainboard/technexion/tim_5690/resourcemap.c | 278 +++ src/mainboard/technexion/tim_5690/romstage.c | 168 ++ src/mainboard/technexion/tim_5690/speaker.c | 91 + src/mainboard/technexion/tim_5690/speaker.h | 25 + src/mainboard/technexion/tim_5690/tn_post_code.c | 227 +++ src/mainboard/technexion/tim_5690/tn_post_code.h | 33 + src/mainboard/technexion/tim_5690/vgabios.c | 79 + src/mainboard/technexion/tim_5690/vgabios.h | 37 + src/mainboard/technexion/tim_8690/Kconfig | 55 + src/mainboard/technexion/tim_8690/acpi/ide.asl | 244 +++ src/mainboard/technexion/tim_8690/acpi/routing.asl | 258 +++ src/mainboard/technexion/tim_8690/acpi/sata.asl | 149 ++ src/mainboard/technexion/tim_8690/acpi/usb.asl | 161 ++ src/mainboard/technexion/tim_8690/acpi_tables.c | 58 + src/mainboard/technexion/tim_8690/board_info.txt | 2 + src/mainboard/technexion/tim_8690/cmos.layout | 117 ++ src/mainboard/technexion/tim_8690/devicetree.cb | 116 ++ src/mainboard/technexion/tim_8690/dsdt.asl | 1792 +++++++++++++++++++ src/mainboard/technexion/tim_8690/fadt.c | 201 +++ src/mainboard/technexion/tim_8690/get_bus_conf.c | 116 ++ src/mainboard/technexion/tim_8690/irq_tables.c | 118 ++ src/mainboard/technexion/tim_8690/mainboard.c | 153 ++ src/mainboard/technexion/tim_8690/mptable.c | 113 ++ src/mainboard/technexion/tim_8690/resourcemap.c | 278 +++ src/mainboard/technexion/tim_8690/romstage.c | 154 ++ src/mainboard/technologic/Kconfig | 4 +- src/mainboard/technologic/ts5300/Kconfig | 23 - src/mainboard/technologic/ts5300/board_info.txt | 2 - src/mainboard/technologic/ts5300/cmos.layout | 72 - src/mainboard/technologic/ts5300/devicetree.cb | 6 - src/mainboard/technologic/ts5300/irq_tables.c | 31 - src/mainboard/technologic/ts5300/mainboard.c | 147 -- src/mainboard/technologic/ts5300/romstage.c | 169 -- src/mainboard/technologic/ts_5300/Kconfig | 23 + src/mainboard/technologic/ts_5300/board_info.txt | 2 + src/mainboard/technologic/ts_5300/cmos.layout | 72 + src/mainboard/technologic/ts_5300/devicetree.cb | 6 + src/mainboard/technologic/ts_5300/irq_tables.c | 31 + src/mainboard/technologic/ts_5300/mainboard.c | 147 ++ src/mainboard/technologic/ts_5300/romstage.c | 169 ++ src/mainboard/via/Kconfig | 14 +- src/mainboard/via/epia-cn/Kconfig | 25 - src/mainboard/via/epia-cn/board_info.txt | 3 - src/mainboard/via/epia-cn/cmos.layout | 72 - src/mainboard/via/epia-cn/devicetree.cb | 61 - src/mainboard/via/epia-cn/irq_tables.c | 53 - src/mainboard/via/epia-cn/romstage.c | 95 - src/mainboard/via/epia-m/Kconfig | 33 - src/mainboard/via/epia-m/acpi_tables.c | 36 - src/mainboard/via/epia-m/board_info.txt | 3 - src/mainboard/via/epia-m/cmos.layout | 72 - src/mainboard/via/epia-m/devicetree.cb | 61 - src/mainboard/via/epia-m/dsdt.asl | 256 --- src/mainboard/via/epia-m/fadt.c | 157 -- src/mainboard/via/epia-m/irq_tables.c | 34 - src/mainboard/via/epia-m/romstage.c | 110 -- src/mainboard/via/epia-m700/Kconfig | 28 - src/mainboard/via/epia-m700/acpi_tables.c | 115 -- src/mainboard/via/epia-m700/board_info.txt | 6 - src/mainboard/via/epia-m700/cmos.layout | 72 - src/mainboard/via/epia-m700/devicetree.cb | 24 - .../via/epia-m700/driving_clk_phase_data.c | 237 --- src/mainboard/via/epia-m700/fadt.c | 171 -- src/mainboard/via/epia-m700/get_dsdt | 43 - src/mainboard/via/epia-m700/irq_tables.c | 56 - src/mainboard/via/epia-m700/romstage.c | 666 ------- src/mainboard/via/epia-m700/wakeup.c | 451 ----- src/mainboard/via/epia-m700/wakeup.h | 33 - src/mainboard/via/epia-m850/Kconfig | 48 - src/mainboard/via/epia-m850/board_info.txt | 6 - src/mainboard/via/epia-m850/devicetree.cb | 111 -- src/mainboard/via/epia-m850/irq_tables.c | 75 - src/mainboard/via/epia-m850/mainboard.c | 111 -- src/mainboard/via/epia-m850/romstage.c | 105 -- src/mainboard/via/epia-mii/Kconfig | 9 - src/mainboard/via/epia-mii/board_info.txt | 4 - src/mainboard/via/epia-ml/Kconfig | 9 - src/mainboard/via/epia-ml/board_info.txt | 4 - src/mainboard/via/epia-n/Kconfig | 29 - src/mainboard/via/epia-n/acpi/irq_links.asl | 571 ------ src/mainboard/via/epia-n/acpi/pata_methods.asl | 132 -- src/mainboard/via/epia-n/acpi/pci_init.asl | 30 - src/mainboard/via/epia-n/acpi/sb_physical.asl | 548 ------ src/mainboard/via/epia-n/acpi_tables.c | 185 -- src/mainboard/via/epia-n/board_info.txt | 2 - src/mainboard/via/epia-n/cmos.layout | 72 - src/mainboard/via/epia-n/devicetree.cb | 101 -- src/mainboard/via/epia-n/dsdt.asl | 353 ---- src/mainboard/via/epia-n/irq_tables.c | 47 - src/mainboard/via/epia-n/mptable.c | 50 - src/mainboard/via/epia-n/romstage.c | 136 -- src/mainboard/via/epia_cn/Kconfig | 25 + src/mainboard/via/epia_cn/board_info.txt | 3 + src/mainboard/via/epia_cn/cmos.layout | 72 + src/mainboard/via/epia_cn/devicetree.cb | 61 + src/mainboard/via/epia_cn/irq_tables.c | 53 + src/mainboard/via/epia_cn/romstage.c | 95 + src/mainboard/via/epia_m/Kconfig | 33 + src/mainboard/via/epia_m/acpi_tables.c | 36 + src/mainboard/via/epia_m/board_info.txt | 3 + src/mainboard/via/epia_m/cmos.layout | 72 + src/mainboard/via/epia_m/devicetree.cb | 61 + src/mainboard/via/epia_m/dsdt.asl | 256 +++ src/mainboard/via/epia_m/fadt.c | 157 ++ src/mainboard/via/epia_m/irq_tables.c | 34 + src/mainboard/via/epia_m/romstage.c | 110 ++ src/mainboard/via/epia_m700/Kconfig | 28 + src/mainboard/via/epia_m700/acpi_tables.c | 115 ++ src/mainboard/via/epia_m700/board_info.txt | 6 + src/mainboard/via/epia_m700/cmos.layout | 72 + src/mainboard/via/epia_m700/devicetree.cb | 24 + .../via/epia_m700/driving_clk_phase_data.c | 237 +++ src/mainboard/via/epia_m700/fadt.c | 171 ++ src/mainboard/via/epia_m700/get_dsdt | 43 + src/mainboard/via/epia_m700/irq_tables.c | 56 + src/mainboard/via/epia_m700/romstage.c | 666 +++++++ src/mainboard/via/epia_m700/wakeup.c | 451 +++++ src/mainboard/via/epia_m700/wakeup.h | 33 + src/mainboard/via/epia_m850/Kconfig | 48 + src/mainboard/via/epia_m850/board_info.txt | 6 + src/mainboard/via/epia_m850/devicetree.cb | 111 ++ src/mainboard/via/epia_m850/irq_tables.c | 75 + src/mainboard/via/epia_m850/mainboard.c | 111 ++ src/mainboard/via/epia_m850/romstage.c | 105 ++ src/mainboard/via/epia_mii/Kconfig | 9 + src/mainboard/via/epia_mii/board_info.txt | 4 + src/mainboard/via/epia_ml/Kconfig | 9 + src/mainboard/via/epia_ml/board_info.txt | 4 + src/mainboard/via/epia_n/Kconfig | 29 + src/mainboard/via/epia_n/acpi/irq_links.asl | 571 ++++++ src/mainboard/via/epia_n/acpi/pata_methods.asl | 132 ++ src/mainboard/via/epia_n/acpi/pci_init.asl | 30 + src/mainboard/via/epia_n/acpi/sb_physical.asl | 548 ++++++ src/mainboard/via/epia_n/acpi_tables.c | 185 ++ src/mainboard/via/epia_n/board_info.txt | 2 + src/mainboard/via/epia_n/cmos.layout | 72 + src/mainboard/via/epia_n/devicetree.cb | 101 ++ src/mainboard/via/epia_n/dsdt.asl | 353 ++++ src/mainboard/via/epia_n/irq_tables.c | 47 + src/mainboard/via/epia_n/mptable.c | 50 + src/mainboard/via/epia_n/romstage.c | 136 ++ 3084 files changed, 191746 insertions(+), 191746 deletions(-)
diff --git a/src/ec/acpi/Makefile.inc b/src/ec/acpi/Makefile.inc index b39aaa2..84776bd 100644 --- a/src/ec/acpi/Makefile.inc +++ b/src/ec/acpi/Makefile.inc @@ -1,3 +1,3 @@ ramstage-y += ec.c smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c -romstage-$(CONFIG_BOARD_LENOVO_X201) += ec.c +romstage-$(CONFIG_BOARD_LENOVO_THINKPAD_X201) += ec.c diff --git a/src/mainboard/a_trend/Kconfig b/src/mainboard/a_trend/Kconfig index e7a154d..a81ca60 100644 --- a/src/mainboard/a_trend/Kconfig +++ b/src/mainboard/a_trend/Kconfig @@ -28,8 +28,8 @@ config BOARD_A_TREND_ATC_6240
endchoice
-source "src/mainboard/a_trend/atc-6220/Kconfig" -source "src/mainboard/a_trend/atc-6240/Kconfig" +source "src/mainboard/a_trend/atc_6220/Kconfig" +source "src/mainboard/a_trend/atc_6240/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/a_trend/atc-6220/Kconfig b/src/mainboard/a_trend/atc-6220/Kconfig deleted file mode 100644 index 982271d..0000000 --- a/src/mainboard/a_trend/atc-6220/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_A_TREND_ATC_6220 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default a_trend/atc-6220 - -config MAINBOARD_PART_NUMBER - string - default "ATC-6220" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_A_TREND_ATC_6220 diff --git a/src/mainboard/a_trend/atc-6220/board_info.txt b/src/mainboard/a_trend/atc-6220/board_info.txt deleted file mode 100644 index a56cca3..0000000 --- a/src/mainboard/a_trend/atc-6220/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.motherboard.cz/mb/atrend/atc6220.htm -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/a_trend/atc-6220/devicetree.cb b/src/mainboard/a_trend/atc-6220/devicetree.cb deleted file mode 100644 index 0dea9ae..0000000 --- a/src/mainboard/a_trend/atc-6220/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/a_trend/atc-6220/irq_tables.c b/src/mainboard/a_trend/atc-6220/irq_tables.c deleted file mode 100644 index c1b42e4..0000000 --- a/src/mainboard/a_trend/atc-6220/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0x600, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x4e, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0a<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0c<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/a_trend/atc-6220/romstage.c b/src/mainboard/a_trend/atc-6220/romstage.c deleted file mode 100644 index 70bc5d8..0000000 --- a/src/mainboard/a_trend/atc-6220/romstage.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> - -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/a_trend/atc-6240/Kconfig b/src/mainboard/a_trend/atc-6240/Kconfig deleted file mode 100644 index 776768b..0000000 --- a/src/mainboard/a_trend/atc-6240/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_A_TREND_ATC_6240 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default a_trend/atc-6240 - -config MAINBOARD_PART_NUMBER - string - default "ATC-6240" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_A_TREND_ATC_6240 diff --git a/src/mainboard/a_trend/atc-6240/board_info.txt b/src/mainboard/a_trend/atc-6240/board_info.txt deleted file mode 100644 index 1acf41b..0000000 --- a/src/mainboard/a_trend/atc-6240/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: desktop -Board URL: http://active-hardware.com/english/reviews/mainboard/atc6240.htm -ROM package: DIP32 -ROM protocol: Parallel diff --git a/src/mainboard/a_trend/atc-6240/devicetree.cb b/src/mainboard/a_trend/atc-6240/devicetree.cb deleted file mode 100644 index e0bfdac..0000000 --- a/src/mainboard/a_trend/atc-6240/devicetree.cb +++ /dev/null @@ -1,69 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83627hf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - io 0x60 = 0x00 - end - device pnp 3f0.7 on # Game port / MIDI / GPIO 1 - io 0x60 = 0x201 - io 0x62 = 0x330 - irq 0x70 = 9 - end - device pnp 3f0.8 off # GPIO 2 / WDT - end - device pnp 3f0.9 off # GPIO 3 - end - device pnp 3f0.a off # ACPI - end - device pnp 3f0.b off # HWM (TODO) - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - device pci c.0 on end # Onboard audio (ES1371) - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/a_trend/atc-6240/irq_tables.c b/src/mainboard/a_trend/atc-6240/irq_tables.c deleted file mode 100644 index 3383056..0000000 --- a/src/mainboard/a_trend/atc-6240/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0xc20, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x44, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0a<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0e<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0c<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, - {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/a_trend/atc-6240/romstage.c b/src/mainboard/a_trend/atc-6240/romstage.c deleted file mode 100644 index 392f40f..0000000 --- a/src/mainboard/a_trend/atc-6240/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/a_trend/atc_6220/Kconfig b/src/mainboard/a_trend/atc_6220/Kconfig new file mode 100644 index 0000000..c1560b4 --- /dev/null +++ b/src/mainboard/a_trend/atc_6220/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_A_TREND_ATC_6220 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default a_trend/atc_6220 + +config MAINBOARD_PART_NUMBER + string + default "ATC-6220" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_A_TREND_ATC_6220 diff --git a/src/mainboard/a_trend/atc_6220/board_info.txt b/src/mainboard/a_trend/atc_6220/board_info.txt new file mode 100644 index 0000000..a56cca3 --- /dev/null +++ b/src/mainboard/a_trend/atc_6220/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.motherboard.cz/mb/atrend/atc6220.htm +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/a_trend/atc_6220/devicetree.cb b/src/mainboard/a_trend/atc_6220/devicetree.cb new file mode 100644 index 0000000..0dea9ae --- /dev/null +++ b/src/mainboard/a_trend/atc_6220/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/a_trend/atc_6220/irq_tables.c b/src/mainboard/a_trend/atc_6220/irq_tables.c new file mode 100644 index 0000000..c1b42e4 --- /dev/null +++ b/src/mainboard/a_trend/atc_6220/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0x600, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x4e, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0a<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/a_trend/atc_6220/romstage.c b/src/mainboard/a_trend/atc_6220/romstage.c new file mode 100644 index 0000000..70bc5d8 --- /dev/null +++ b/src/mainboard/a_trend/atc_6220/romstage.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> + +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/a_trend/atc_6240/Kconfig b/src/mainboard/a_trend/atc_6240/Kconfig new file mode 100644 index 0000000..d1e660e --- /dev/null +++ b/src/mainboard/a_trend/atc_6240/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_A_TREND_ATC_6240 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default a_trend/atc_6240 + +config MAINBOARD_PART_NUMBER + string + default "ATC-6240" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_A_TREND_ATC_6240 diff --git a/src/mainboard/a_trend/atc_6240/board_info.txt b/src/mainboard/a_trend/atc_6240/board_info.txt new file mode 100644 index 0000000..1acf41b --- /dev/null +++ b/src/mainboard/a_trend/atc_6240/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +Board URL: http://active-hardware.com/english/reviews/mainboard/atc6240.htm +ROM package: DIP32 +ROM protocol: Parallel diff --git a/src/mainboard/a_trend/atc_6240/devicetree.cb b/src/mainboard/a_trend/atc_6240/devicetree.cb new file mode 100644 index 0000000..e0bfdac --- /dev/null +++ b/src/mainboard/a_trend/atc_6240/devicetree.cb @@ -0,0 +1,69 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83627hf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + io 0x60 = 0x00 + end + device pnp 3f0.7 on # Game port / MIDI / GPIO 1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 3f0.8 off # GPIO 2 / WDT + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a off # ACPI + end + device pnp 3f0.b off # HWM (TODO) + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci c.0 on end # Onboard audio (ES1371) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/a_trend/atc_6240/irq_tables.c b/src/mainboard/a_trend/atc_6240/irq_tables.c new file mode 100644 index 0000000..3383056 --- /dev/null +++ b/src/mainboard/a_trend/atc_6240/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0xc20, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x44, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0a<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0e<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, + {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/a_trend/atc_6240/romstage.c b/src/mainboard/a_trend/atc_6240/romstage.c new file mode 100644 index 0000000..392f40f --- /dev/null +++ b/src/mainboard/a_trend/atc_6240/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83627HF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/aaeon/Kconfig b/src/mainboard/aaeon/Kconfig index d335938..9201c56 100644 --- a/src/mainboard/aaeon/Kconfig +++ b/src/mainboard/aaeon/Kconfig @@ -8,7 +8,7 @@ config BOARD_AAEON_PFM_540I_REVB
endchoice
-source "src/mainboard/aaeon/pfm-540i_revb/Kconfig" +source "src/mainboard/aaeon/pfm_540i_revb/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/aaeon/pfm-540i_revb/Kconfig b/src/mainboard/aaeon/pfm-540i_revb/Kconfig deleted file mode 100644 index 6b156b2..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_AAEON_PFM_540I_REVB - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_1024 - select POWER_BUTTON_FORCE_ENABLE - -config MAINBOARD_DIR - string - default aaeon/pfm-540i_revb - -config MAINBOARD_PART_NUMBER - string - default "PFM-540I_REVB" - -config IRQ_SLOT_COUNT - int - default 4 - -endif # BOARD_AAEON_PFM_540I_REVB diff --git a/src/mainboard/aaeon/pfm-540i_revb/board_info.txt b/src/mainboard/aaeon/pfm-540i_revb/board_info.txt deleted file mode 100644 index 76246af..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: PFM-540I Rev.B -Category: half -Board URL: http://www.aaeonusa.com/products/details/?item_id=1043 diff --git a/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb b/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb deleted file mode 100644 index 221b80c..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/devicetree.cb +++ /dev/null @@ -1,74 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci c.0 on end # ISA Bridge (PC104) - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/smsc/smscsuperio - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.7 on # Keyboard - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.a off end # Runtime/ACPI - - # superio/smsc/smscsuperio currently only supports the first 2 serial ports. - device pnp 4e.b off # Com3 - io 0x60 = 0x3e8 - irq 0x70 = 10 - end - device pnp 4e.c off # Com4 - io 0x60 = 0x2e8 - irq 0x70 = 11 - end - end - end - device pci f.2 on end # IDE Controller - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end - diff --git a/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c b/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c deleted file mode 100644 index 79bbb3e..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/irq_tables.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2011 Mark Norman mpnorman@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 5 -#define PIRQB 11 -#define PIRQC 10 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - /* CPU */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - /* Ethernet */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - /* Chipset */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/aaeon/pfm-540i_revb/mainboard.c b/src/mainboard/aaeon/pfm-540i_revb/mainboard.c deleted file mode 100644 index a5fbfe4..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/mainboard.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Mark Norman mpnorman@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> - -static void init(struct device *dev) -{ - printk(BIOS_DEBUG, "AAEON PFM-540I_REVB ENTER %s\n", __func__); - printk(BIOS_DEBUG, "AAEON PFM-540I_REVB EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/aaeon/pfm-540i_revb/romstage.c b/src/mainboard/aaeon/pfm-540i_revb/romstage.c deleted file mode 100644 index c4bf462..0000000 --- a/src/mainboard/aaeon/pfm-540i_revb/romstage.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2011 Mark Norman mpnorman@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on romstage.c from AMD's DB800 mainboard. */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include <spd.h> -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/aaeon/pfm_540i_revb/Kconfig b/src/mainboard/aaeon/pfm_540i_revb/Kconfig new file mode 100644 index 0000000..ff8fe62 --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/Kconfig @@ -0,0 +1,27 @@ +if BOARD_AAEON_PFM_540I_REVB + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_1024 + select POWER_BUTTON_FORCE_ENABLE + +config MAINBOARD_DIR + string + default aaeon/pfm_540i_revb + +config MAINBOARD_PART_NUMBER + string + default "PFM-540I_REVB" + +config IRQ_SLOT_COUNT + int + default 4 + +endif # BOARD_AAEON_PFM_540I_REVB diff --git a/src/mainboard/aaeon/pfm_540i_revb/board_info.txt b/src/mainboard/aaeon/pfm_540i_revb/board_info.txt new file mode 100644 index 0000000..76246af --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/board_info.txt @@ -0,0 +1,3 @@ +Board name: PFM-540I Rev.B +Category: half +Board URL: http://www.aaeonusa.com/products/details/?item_id=1043 diff --git a/src/mainboard/aaeon/pfm_540i_revb/devicetree.cb b/src/mainboard/aaeon/pfm_540i_revb/devicetree.cb new file mode 100644 index 0000000..221b80c --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/devicetree.cb @@ -0,0 +1,74 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "1" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci c.0 on end # ISA Bridge (PC104) + device pci e.0 on end # Ethernet + device pci f.0 on # ISA Bridge + chip superio/smsc/smscsuperio + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.7 on # Keyboard + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.a off end # Runtime/ACPI + + # superio/smsc/smscsuperio currently only supports the first 2 serial ports. + device pnp 4e.b off # Com3 + io 0x60 = 0x3e8 + irq 0x70 = 10 + end + device pnp 4e.c off # Com4 + io 0x60 = 0x2e8 + irq 0x70 = 11 + end + end + end + device pci f.2 on end # IDE Controller + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end + diff --git a/src/mainboard/aaeon/pfm_540i_revb/irq_tables.c b/src/mainboard/aaeon/pfm_540i_revb/irq_tables.c new file mode 100644 index 0000000..79bbb3e --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/irq_tables.c @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2011 Mark Norman mpnorman@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on irq_tables.c from AMD's DB800 mainboard. */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 5 +#define PIRQB 11 +#define PIRQC 10 +#define PIRQD 9 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x00, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + /* CPU */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + /* Ethernet */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + /* Chipset */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/aaeon/pfm_540i_revb/mainboard.c b/src/mainboard/aaeon/pfm_540i_revb/mainboard.c new file mode 100644 index 0000000..7b300eb --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/mainboard.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Mark Norman mpnorman@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> + +static void init(struct device *dev) +{ + printk(BIOS_DEBUG, "AAEON PFM_540I_REVB ENTER %s\n", __func__); + printk(BIOS_DEBUG, "AAEON PFM_540I_REVB EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/aaeon/pfm_540i_revb/romstage.c b/src/mainboard/aaeon/pfm_540i_revb/romstage.c new file mode 100644 index 0000000..c4bf462 --- /dev/null +++ b/src/mainboard/aaeon/pfm_540i_revb/romstage.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2011 Mark Norman mpnorman@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from AMD's DB800 mainboard. */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include <spd.h> +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/smsc/smscsuperio/smscsuperio.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ +} diff --git a/src/mainboard/abit/Kconfig b/src/mainboard/abit/Kconfig index 6a72054..a445755 100644 --- a/src/mainboard/abit/Kconfig +++ b/src/mainboard/abit/Kconfig @@ -26,7 +26,7 @@ config BOARD_ABIT_BE6_II_V2_0
endchoice
-source "src/mainboard/abit/be6-ii_v2_0/Kconfig" +source "src/mainboard/abit/be6_ii_v2_0/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/abit/be6-ii_v2_0/Kconfig b/src/mainboard/abit/be6-ii_v2_0/Kconfig deleted file mode 100644 index 5dc1ca0..0000000 --- a/src/mainboard/abit/be6-ii_v2_0/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ABIT_BE6_II_V2_0 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default abit/be6-ii_v2_0 - -config MAINBOARD_PART_NUMBER - string - default "BE6-II V2.0" - -config IRQ_SLOT_COUNT - int - default 9 - -endif # BOARD_ABIT_BE6_II_V2_0 diff --git a/src/mainboard/abit/be6-ii_v2_0/board_info.txt b/src/mainboard/abit/be6-ii_v2_0/board_info.txt deleted file mode 100644 index 078ab8f..0000000 --- a/src/mainboard/abit/be6-ii_v2_0/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: http://www.extremeoverclocking.com/reviews/motherboards/BE6-II_v2_1.html -ROM package: DIP32 -ROM protocol: Parallel -Flashrom support: — diff --git a/src/mainboard/abit/be6-ii_v2_0/devicetree.cb b/src/mainboard/abit/be6-ii_v2_0/devicetree.cb deleted file mode 100644 index 3a6648a..0000000 --- a/src/mainboard/abit/be6-ii_v2_0/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE, UDMA/33 (part of 82371EB) - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - device pci 13.0 on end # IDE, UDMA/66 (HPT366 controller) - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/abit/be6-ii_v2_0/irq_tables.c b/src/mainboard/abit/be6-ii_v2_0/irq_tables.c deleted file mode 100644 index dfc639b..0000000 --- a/src/mainboard/abit/be6-ii_v2_0/irq_tables.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x4b, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x13<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x61, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x60, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0x0deb8}}, 0x6, 0x0}, - {0x00,(0x08<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x7, 0x0}, - {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/abit/be6-ii_v2_0/romstage.c b/src/mainboard/abit/be6-ii_v2_0/romstage.c deleted file mode 100644 index 41a09da..0000000 --- a/src/mainboard/abit/be6-ii_v2_0/romstage.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -/* FIXME: It's a Winbond W83977EF, actually. */ -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -/* FIXME: It's a Winbond W83977EF, actually. */ -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/abit/be6_ii_v2_0/Kconfig b/src/mainboard/abit/be6_ii_v2_0/Kconfig new file mode 100644 index 0000000..9f6237c --- /dev/null +++ b/src/mainboard/abit/be6_ii_v2_0/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ABIT_BE6_II_V2_0 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default abit/be6_ii_v2_0 + +config MAINBOARD_PART_NUMBER + string + default "BE6-II V2.0" + +config IRQ_SLOT_COUNT + int + default 9 + +endif # BOARD_ABIT_BE6_II_V2_0 diff --git a/src/mainboard/abit/be6_ii_v2_0/board_info.txt b/src/mainboard/abit/be6_ii_v2_0/board_info.txt new file mode 100644 index 0000000..078ab8f --- /dev/null +++ b/src/mainboard/abit/be6_ii_v2_0/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://www.extremeoverclocking.com/reviews/motherboards/BE6-II_v2_1.html +ROM package: DIP32 +ROM protocol: Parallel +Flashrom support: — diff --git a/src/mainboard/abit/be6_ii_v2_0/devicetree.cb b/src/mainboard/abit/be6_ii_v2_0/devicetree.cb new file mode 100644 index 0000000..3a6648a --- /dev/null +++ b/src/mainboard/abit/be6_ii_v2_0/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE, UDMA/33 (part of 82371EB) + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci 13.0 on end # IDE, UDMA/66 (HPT366 controller) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/abit/be6_ii_v2_0/irq_tables.c b/src/mainboard/abit/be6_ii_v2_0/irq_tables.c new file mode 100644 index 0000000..dfc639b --- /dev/null +++ b/src/mainboard/abit/be6_ii_v2_0/irq_tables.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0x1c20, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x4b, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x13<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x61, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x60, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0x0deb8}}, 0x6, 0x0}, + {0x00,(0x08<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x7, 0x0}, + {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/abit/be6_ii_v2_0/romstage.c b/src/mainboard/abit/be6_ii_v2_0/romstage.c new file mode 100644 index 0000000..41a09da --- /dev/null +++ b/src/mainboard/abit/be6_ii_v2_0/romstage.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +/* FIXME: It's a Winbond W83977EF, actually. */ +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +/* FIXME: It's a Winbond W83977EF, actually. */ +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/adlink/CM2-GF/board_info.txt b/src/mainboard/adlink/CM2-GF/board_info.txt index 4244bfc..ac70067 100644 --- a/src/mainboard/adlink/CM2-GF/board_info.txt +++ b/src/mainboard/adlink/CM2-GF/board_info.txt @@ -5,4 +5,4 @@ ROM package: SOIC8 ROM protocol: SPI ROM socketed: n Flashrom support: y -Clone of: lippert/frontrunner-af +Clone of: lippert/frontrunner_af diff --git a/src/mainboard/adlink/cExpress-GFR/board_info.txt b/src/mainboard/adlink/cExpress-GFR/board_info.txt index 7f883db..5f343df 100644 --- a/src/mainboard/adlink/cExpress-GFR/board_info.txt +++ b/src/mainboard/adlink/cExpress-GFR/board_info.txt @@ -5,4 +5,4 @@ ROM package: SOIC8 ROM protocol: SPI ROM socketed: n Flashrom support: y -Clone of: lippert/toucan-af +Clone of: lippert/toucan_af diff --git a/src/mainboard/advansus/Kconfig b/src/mainboard/advansus/Kconfig index 956d14d..9cd3765 100644 --- a/src/mainboard/advansus/Kconfig +++ b/src/mainboard/advansus/Kconfig @@ -26,7 +26,7 @@ config BOARD_ADVANSUS_A785E_I
endchoice
-source "src/mainboard/advansus/a785e-i/Kconfig" +source "src/mainboard/advansus/a785e_i/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/advansus/a785e-i/Kconfig b/src/mainboard/advansus/a785e-i/Kconfig deleted file mode 100644 index b3427a2..0000000 --- a/src/mainboard/advansus/a785e-i/Kconfig +++ /dev/null @@ -1,92 +0,0 @@ -if BOARD_ADVANSUS_A785E_I - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_ASB2 - select DIMM_DDR3 - select DIMM_REGISTERED - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_WINBOND_W83627HF #COM1, COM2 - #select SUPERIO_FINTEK_F81216AD #COM3, COM4 - select SB_SUPERIO_HWM - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select HAVE_DEBUG_CAR - select SET_FIDVID - -config MAINBOARD_DIR - string - default advansus/a785e-i - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "A785E-I" - -config HW_MEM_HOLE_SIZEK - hex - default 0x100000 - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config VGA_BIOS_ID - string - default "1002,9712" - -endif #BOARD_ADVANSUS_A785E_I diff --git a/src/mainboard/advansus/a785e-i/Makefile.inc b/src/mainboard/advansus/a785e-i/Makefile.inc deleted file mode 100644 index 0bbc26f..0000000 --- a/src/mainboard/advansus/a785e-i/Makefile.inc +++ /dev/null @@ -1,15 +0,0 @@ - -#SB800 CIMx share AGESA V5 lib code -ifneq ($(CONFIG_CPU_AMD_AGESA),y) - AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 - romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - - AGESA_INC := -I$(AGESA_ROOT)/ \ - -I$(AGESA_ROOT)/Include \ - -I$(AGESA_ROOT)/Proc/IDS/ \ - -I$(AGESA_ROOT)/Proc/CPU/ \ - -I$(AGESA_ROOT)/Proc/CPU/Family - - CFLAGS_common += $(AGESA_INC) -endif diff --git a/src/mainboard/advansus/a785e-i/acpi/cpstate.asl b/src/mainboard/advansus/a785e-i/acpi/cpstate.asl deleted file mode 100644 index f2a0d62..0000000 --- a/src/mainboard/advansus/a785e-i/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/advansus/a785e-i/acpi/routing.asl b/src/mainboard/advansus/a785e-i/acpi/routing.asl deleted file mode 100644 index 87a79f9..0000000 --- a/src/mainboard/advansus/a785e-i/acpi/routing.asl +++ /dev/null @@ -1,398 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/advansus/a785e-i/acpi/sata.asl b/src/mainboard/advansus/a785e-i/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/advansus/a785e-i/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/advansus/a785e-i/acpi/usb.asl b/src/mainboard/advansus/a785e-i/acpi/usb.asl deleted file mode 100644 index 2822ffd..0000000 --- a/src/mainboard/advansus/a785e-i/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/advansus/a785e-i/acpi_tables.c b/src/mainboard/advansus/a785e-i/acpi_tables.c deleted file mode 100644 index 3f9bd60..0000000 --- a/src/mainboard/advansus/a785e-i/acpi_tables.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/advansus/a785e-i/board_info.txt b/src/mainboard/advansus/a785e-i/board_info.txt deleted file mode 100644 index 3c865ec..0000000 --- a/src/mainboard/advansus/a785e-i/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: mini -Board URL: http://www.advansus.com.tw/products/247/A785E-I -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n diff --git a/src/mainboard/advansus/a785e-i/cmos.layout b/src/mainboard/advansus/a785e-i/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/advansus/a785e-i/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/advansus/a785e-i/devicetree.cb b/src/mainboard/advansus/a785e-i/devicetree.cb deleted file mode 100644 index f7db1cc..0000000 --- a/src/mainboard/advansus/a785e-i/devicetree.cb +++ /dev/null @@ -1,124 +0,0 @@ -# sample config for advansus/A785E-I -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_ASB2 #L1 and DDR3 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # Ethernet - device pci a.0 on end # Ethernet - register "gppsb_configuration" = "4" # Configuration E - register "gpp_configuration" = "3" # Configuration D - register "port_enable" = "0x6f6" - register "gfx_dev2_dev3" = "0" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - register "gfx_tmds" = "1" - register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 - register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL - end - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end #superio/winbond/w83627hf - end # LPC 0x439d - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - device pci 15.0 on end # PCIe 0 - device pci 15.1 on end # PCIe 1 - device pci 15.2 on end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB - #register "gpp_configuration" = "0" #4:0:0:0 - #register "gpp_configuration" = "2" #2:2:0:0 - #register "gpp_configuration" = "3" #2:1:1:0 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #domain -end diff --git a/src/mainboard/advansus/a785e-i/dsdt.asl b/src/mainboard/advansus/a785e-i/dsdt.asl deleted file mode 100644 index c6b5492..0000000 --- a/src/mainboard/advansus/a785e-i/dsdt.asl +++ /dev/null @@ -1,1818 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ADVANSUS", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) -#if 0 - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/advansus/a785e-i/get_bus_conf.c b/src/mainboard/advansus/a785e-i/get_bus_conf.c deleted file mode 100644 index 80e1d3e..0000000 --- a/src/mainboard/advansus/a785e-i/get_bus_conf.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdfam10_sysconf.h> -#if CONFIG_AMD_SB_CIMX -#include <sb_cimx.h> -#endif - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -int bus_isa; -u8 bus_rs780[11]; -u8 bus_sb800[6]; -u32 apicid_sb800; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_rs780; -u32 sbdn_sb800; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb800 = 0; - - memset(bus_sb800, 0, sizeof(bus_sb800)); - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = bus_rs780[0]; - - - /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); - if (dev) { - bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - - for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); - if (dev) { - bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - if(255 != bus_rs780[i]) { - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - } - - /* I/O APICs: APIC ID Version State Address */ - bus_isa = 10; -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb800 = apicid_base + 0; - -#if CONFIG_AMD_SB_CIMX - sb_Late_Post(); -#endif -} diff --git a/src/mainboard/advansus/a785e-i/irq_tables.c b/src/mainboard/advansus/a785e-i/irq_tables.c deleted file mode 100644 index 067b2e6..0000000 --- a/src/mainboard/advansus/a785e-i/irq_tables.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam10_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_isa; -extern u8 bus_rs780[8]; -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/advansus/a785e-i/mainboard.c b/src/mainboard/advansus/a785e-i/mainboard.c deleted file mode 100644 index 9b6450d..0000000 --- a/src/mainboard/advansus/a785e-i/mainboard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "SBPLATFORM.h" - - -u8 is_dev3_present(void); -void set_pcie_dereset(void); -void set_pcie_reset(void); -void enable_int_gfx(void); - -/* GPIO6. */ -void enable_int_gfx(void) -{ - volatile u8 *gpio_reg; - -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif - /* make sure the Acpi MMIO(fed80000) is accessible */ - RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ - - *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ - *(gpio_reg + 170) = 0x1; /* gpio_gate */ - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ - - *(gpio_reg + 0x6) = 0x8; - *(gpio_reg + 170) = 0x0; -} - -void set_pcie_dereset() -{ -} - -void set_pcie_reset(void) -{ -} - -u8 is_dev3_present(void) -{ - return 0; -} - - -/************************************************* -* enable the dedicated function in A785E-I board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard A785E-I Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - enable_int_gfx(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/advansus/a785e-i/mb_sysconf.h b/src/mainboard/advansus/a785e-i/mb_sysconf.h deleted file mode 100644 index 8a693fd..0000000 --- a/src/mainboard/advansus/a785e-i/mb_sysconf.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/advansus/a785e-i/mptable.c b/src/mainboard/advansus/a785e-i/mptable.c deleted file mode 100644 index b04cf41..0000000 --- a/src/mainboard/advansus/a785e-i/mptable.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include <SBPLATFORM.h> - -extern int bus_isa; -extern u8 bus_rs780[11]; -extern u8 bus_sb800[6]; -extern u32 apicid_sb800; -extern u32 sbdn_rs780; -extern u32 sbdn_sb800; - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - u32 dword; - u8 byte; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); - dword &= 0xFFFFFFF0; - smp_write_ioapic(mc, apicid_sb800, 0x11, dword); - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/advansus/a785e-i/platform_cfg.h b/src/mainboard/advansus/a785e-i/platform_cfg.h deleted file mode 100644 index 6944ab2..0000000 --- a/src/mainboard/advansus/a785e-i/platform_cfg.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -/** - * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address - */ -#define SIO_HWM_BASE_ADDRESS 0x290 - -#endif diff --git a/src/mainboard/advansus/a785e-i/resourcemap.c b/src/mainboard/advansus/a785e-i/resourcemap.c deleted file mode 100644 index 183883a..0000000 --- a/src/mainboard/advansus/a785e-i/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/advansus/a785e-i/romstage.c b/src/mainboard/advansus/a785e-i/romstage.c deleted file mode 100644 index 20cb703..0000000 --- a/src/mainboard/advansus/a785e-i/romstage.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <lib.h> -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include <sb_cimx.h> -#include <SBPLATFORM.h> /* SB OEM constants */ -#include <southbridge/amd/cimx/sb800/smbus.h> -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include "spd.h" -#include <reset.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - //enable port80 decoding and southbridge poweron init - sb_Poweron_Init(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb800_clk_output_48Mhz(); - - w83627hf_set_clksel_48(PNP_DEV(0x2e, 0)); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - printk(BIOS_DEBUG, "\n"); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// ram_check(0x00200000, 0x00200000 + (640 * 1024)); -// ram_check(0x40200000, 0x40200000 + (640 * 1024)); - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - - return 0; -} diff --git a/src/mainboard/advansus/a785e_i/Kconfig b/src/mainboard/advansus/a785e_i/Kconfig new file mode 100644 index 0000000..46e7a40 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/Kconfig @@ -0,0 +1,92 @@ +if BOARD_ADVANSUS_A785E_I + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_ASB2 + select DIMM_DDR3 + select DIMM_REGISTERED + select QRANK_DIMM_SUPPORT + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_WINBOND_W83627HF #COM1, COM2 + #select SUPERIO_FINTEK_F81216AD #COM3, COM4 + select SB_SUPERIO_HWM + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select HAVE_DEBUG_CAR + select SET_FIDVID + +config MAINBOARD_DIR + string + default advansus/a785e_i + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "A785E-I" + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config VGA_BIOS_ID + string + default "1002,9712" + +endif #BOARD_ADVANSUS_A785E_I diff --git a/src/mainboard/advansus/a785e_i/Makefile.inc b/src/mainboard/advansus/a785e_i/Makefile.inc new file mode 100644 index 0000000..0bbc26f --- /dev/null +++ b/src/mainboard/advansus/a785e_i/Makefile.inc @@ -0,0 +1,15 @@ + +#SB800 CIMx share AGESA V5 lib code +ifneq ($(CONFIG_CPU_AMD_AGESA),y) + AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 + romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + + AGESA_INC := -I$(AGESA_ROOT)/ \ + -I$(AGESA_ROOT)/Include \ + -I$(AGESA_ROOT)/Proc/IDS/ \ + -I$(AGESA_ROOT)/Proc/CPU/ \ + -I$(AGESA_ROOT)/Proc/CPU/Family + + CFLAGS_common += $(AGESA_INC) +endif diff --git a/src/mainboard/advansus/a785e_i/acpi/cpstate.asl b/src/mainboard/advansus/a785e_i/acpi/cpstate.asl new file mode 100644 index 0000000..f2a0d62 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/advansus/a785e_i/acpi/routing.asl b/src/mainboard/advansus/a785e_i/acpi/routing.asl new file mode 100644 index 0000000..87a79f9 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/acpi/routing.asl @@ -0,0 +1,398 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/advansus/a785e_i/acpi/sata.asl b/src/mainboard/advansus/a785e_i/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/advansus/a785e_i/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/advansus/a785e_i/acpi/usb.asl b/src/mainboard/advansus/a785e_i/acpi/usb.asl new file mode 100644 index 0000000..2822ffd --- /dev/null +++ b/src/mainboard/advansus/a785e_i/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/advansus/a785e_i/acpi_tables.c b/src/mainboard/advansus/a785e_i/acpi_tables.c new file mode 100644 index 0000000..3f9bd60 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/acpi_tables.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/advansus/a785e_i/board_info.txt b/src/mainboard/advansus/a785e_i/board_info.txt new file mode 100644 index 0000000..3c865ec --- /dev/null +++ b/src/mainboard/advansus/a785e_i/board_info.txt @@ -0,0 +1,5 @@ +Category: mini +Board URL: http://www.advansus.com.tw/products/247/A785E-I +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/advansus/a785e_i/cmos.layout b/src/mainboard/advansus/a785e_i/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/advansus/a785e_i/devicetree.cb b/src/mainboard/advansus/a785e_i/devicetree.cb new file mode 100644 index 0000000..7b15a4e --- /dev/null +++ b/src/mainboard/advansus/a785e_i/devicetree.cb @@ -0,0 +1,124 @@ +# sample config for advansus/A785E_I +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_ASB2 #L1 and DDR3 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # Ethernet + device pci a.0 on end # Ethernet + register "gppsb_configuration" = "4" # Configuration E + register "gpp_configuration" = "3" # Configuration D + register "port_enable" = "0x6f6" + register "gfx_dev2_dev3" = "0" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + register "gfx_tmds" = "1" + register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 + register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL + end + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end #superio/winbond/w83627hf + end # LPC 0x439d + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 15.0 on end # PCIe 0 + device pci 15.1 on end # PCIe 1 + device pci 15.2 on end # PCIe 2 + device pci 15.3 on end # PCIe 3 + device pci 16.0 on end # USB + device pci 16.2 on end # USB + #register "gpp_configuration" = "0" #4:0:0:0 + #register "gpp_configuration" = "2" #2:2:0:0 + #register "gpp_configuration" = "3" #2:1:1:0 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end #domain +end diff --git a/src/mainboard/advansus/a785e_i/dsdt.asl b/src/mainboard/advansus/a785e_i/dsdt.asl new file mode 100644 index 0000000..c6b5492 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/dsdt.asl @@ -0,0 +1,1818 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ADVANSUS", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PIRA) + Store(0, PIRB) + Store(0, PIRC) + Store(0, PIRD) + Store(0, PIRE) + Store(0, PIRF) + Store(0, PIRG) + Store(0, PIRH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PIRA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PIRB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PIRC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIRD) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PIRE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PIRF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PIRG) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PIRH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) +#if 0 + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ +#if 0 + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +#endif +} +/* End of ASL file */ diff --git a/src/mainboard/advansus/a785e_i/get_bus_conf.c b/src/mainboard/advansus/a785e_i/get_bus_conf.c new file mode 100644 index 0000000..80e1d3e --- /dev/null +++ b/src/mainboard/advansus/a785e_i/get_bus_conf.c @@ -0,0 +1,141 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdfam10_sysconf.h> +#if CONFIG_AMD_SB_CIMX +#include <sb_cimx.h> +#endif + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +int bus_isa; +u8 bus_rs780[11]; +u8 bus_sb800[6]; +u32 apicid_sb800; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + + +u32 sbdn_rs780; +u32 sbdn_sb800; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb800 = 0; + + memset(bus_sb800, 0, sizeof(bus_sb800)); + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb800[0] = bus_rs780[0]; + + + /* sb800 */ + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + if (dev) { + bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); + if (dev) { + bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + if(255 != bus_rs780[i]) { + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + } + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb800 = apicid_base + 0; + +#if CONFIG_AMD_SB_CIMX + sb_Late_Post(); +#endif +} diff --git a/src/mainboard/advansus/a785e_i/irq_tables.c b/src/mainboard/advansus/a785e_i/irq_tables.c new file mode 100644 index 0000000..067b2e6 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/irq_tables.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam10_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern u8 bus_isa; +extern u8 bus_rs780[8]; +extern u8 bus_sb800[6]; +extern unsigned long sbdn_sb800; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb800[0]; + pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/advansus/a785e_i/mainboard.c b/src/mainboard/advansus/a785e_i/mainboard.c new file mode 100644 index 0000000..9b6450d --- /dev/null +++ b/src/mainboard/advansus/a785e_i/mainboard.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "SBPLATFORM.h" + + +u8 is_dev3_present(void); +void set_pcie_dereset(void); +void set_pcie_reset(void); +void enable_int_gfx(void); + +/* GPIO6. */ +void enable_int_gfx(void) +{ + volatile u8 *gpio_reg; + +#ifdef UNUSED_CODE + RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ + RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ +#endif + /* make sure the Acpi MMIO(fed80000) is accessible */ + RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ + + *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ + *(gpio_reg + 170) = 0x1; /* gpio_gate */ + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ + + *(gpio_reg + 0x6) = 0x8; + *(gpio_reg + 170) = 0x0; +} + +void set_pcie_dereset() +{ +} + +void set_pcie_reset(void) +{ +} + +u8 is_dev3_present(void) +{ + return 0; +} + + +/************************************************* +* enable the dedicated function in A785E-I board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard A785E-I Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + enable_int_gfx(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/advansus/a785e_i/mb_sysconf.h b/src/mainboard/advansus/a785e_i/mb_sysconf.h new file mode 100644 index 0000000..8a693fd --- /dev/null +++ b/src/mainboard/advansus/a785e_i/mb_sysconf.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/advansus/a785e_i/mptable.c b/src/mainboard/advansus/a785e_i/mptable.c new file mode 100644 index 0000000..b04cf41 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/mptable.c @@ -0,0 +1,92 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include <SBPLATFORM.h> + +extern int bus_isa; +extern u8 bus_rs780[11]; +extern u8 bus_sb800[6]; +extern u32 apicid_sb800; +extern u32 sbdn_rs780; +extern u32 sbdn_sb800; + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + u32 dword; + u8 byte; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); + dword &= 0xFFFFFFF0; + smp_write_ioapic(mc, apicid_sb800, 0x11, dword); + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/advansus/a785e_i/platform_cfg.h b/src/mainboard/advansus/a785e_i/platform_cfg.h new file mode 100644 index 0000000..6944ab2 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/platform_cfg.h @@ -0,0 +1,219 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +/** + * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address + */ +#define SIO_HWM_BASE_ADDRESS 0x290 + +#endif diff --git a/src/mainboard/advansus/a785e_i/resourcemap.c b/src/mainboard/advansus/a785e_i/resourcemap.c new file mode 100644 index 0000000..183883a --- /dev/null +++ b/src/mainboard/advansus/a785e_i/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/advansus/a785e_i/romstage.c b/src/mainboard/advansus/a785e_i/romstage.c new file mode 100644 index 0000000..20cb703 --- /dev/null +++ b/src/mainboard/advansus/a785e_i/romstage.c @@ -0,0 +1,253 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <lib.h> +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include <sb_cimx.h> +#include <SBPLATFORM.h> /* SB OEM constants */ +#include <southbridge/amd/cimx/sb800/smbus.h> +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include "spd.h" +#include <reset.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + //enable port80 decoding and southbridge poweron init + sb_Poweron_Init(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb800_clk_output_48Mhz(); + + w83627hf_set_clksel_48(PNP_DEV(0x2e, 0)); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + printk(BIOS_DEBUG, "\n"); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// ram_check(0x00200000, 0x00200000 + (640 * 1024)); +// ram_check(0x40200000, 0x40200000 + (640 * 1024)); + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + + return 0; +} diff --git a/src/mainboard/advantech/Kconfig b/src/mainboard/advantech/Kconfig index ab46f96..d23021e 100644 --- a/src/mainboard/advantech/Kconfig +++ b/src/mainboard/advantech/Kconfig @@ -26,7 +26,7 @@ config BOARD_ADVANTECH_PCM_5820
endchoice
-source "src/mainboard/advantech/pcm-5820/Kconfig" +source "src/mainboard/advantech/pcm_5820/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/advantech/pcm-5820/Kconfig b/src/mainboard/advantech/pcm-5820/Kconfig deleted file mode 100644 index 86bcd7a..0000000 --- a/src/mainboard/advantech/pcm-5820/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ADVANTECH_PCM_5820 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977F - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default advantech/pcm-5820 - -config MAINBOARD_PART_NUMBER - string - default "PCM-5820" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_ADVANTECH_PCM_5820 diff --git a/src/mainboard/advantech/pcm-5820/board_info.txt b/src/mainboard/advantech/pcm-5820/board_info.txt deleted file mode 100644 index 84b3c8d..0000000 --- a/src/mainboard/advantech/pcm-5820/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: half -Board URL: http://taiwan.advantech.com.tw/products/Model_Detail.asp?model_id=1-1TGZL8 -ROM package: PLCC32 -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/advantech/pcm-5820/devicetree.cb b/src/mainboard/advantech/pcm-5820/devicetree.cb deleted file mode 100644 index 8027ee2..0000000 --- a/src/mainboard/advantech/pcm-5820/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 12.0 on # ISA bridge - chip superio/winbond/w83977f # SUper I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.4 on # RTC / On-Now control - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # IR - # TODO? - end - device pnp 3f0.7 on # GPIO 1 - # TODO? - end - device pnp 3f0.8 on # GPIO 2 - # TODO? - end - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio (onboard) - device pci 12.4 on end # VGA - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/advantech/pcm-5820/irq_tables.c b/src/mainboard/advantech/pcm-5820/irq_tables.c deleted file mode 100644 index ac25227..0000000 --- a/src/mainboard/advantech/pcm-5820/irq_tables.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x12 << 3) | 0x0, /* Interrupt router device */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xde, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0b << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00, (0x13 << 3) | 0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/advantech/pcm-5820/romstage.c b/src/mainboard/advantech/pcm-5820/romstage.c deleted file mode 100644 index a6b856e..0000000 --- a/src/mainboard/advantech/pcm-5820/romstage.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "cpu/x86/bist.h" -#include "superio/winbond/w83977f/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/advantech/pcm_5820/Kconfig b/src/mainboard/advantech/pcm_5820/Kconfig new file mode 100644 index 0000000..f0d7296 --- /dev/null +++ b/src/mainboard/advantech/pcm_5820/Kconfig @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ADVANTECH_PCM_5820 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_GX1 + select NORTHBRIDGE_AMD_GX1 + select SOUTHBRIDGE_AMD_CS5530 + select SUPERIO_WINBOND_W83977F + select ROMCC + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default advantech/pcm_5820 + +config MAINBOARD_PART_NUMBER + string + default "PCM-5820" + +config IRQ_SLOT_COUNT + int + default 2 + +endif # BOARD_ADVANTECH_PCM_5820 diff --git a/src/mainboard/advantech/pcm_5820/board_info.txt b/src/mainboard/advantech/pcm_5820/board_info.txt new file mode 100644 index 0000000..84b3c8d --- /dev/null +++ b/src/mainboard/advantech/pcm_5820/board_info.txt @@ -0,0 +1,5 @@ +Category: half +Board URL: http://taiwan.advantech.com.tw/products/Model_Detail.asp?model_id=1-1TGZL8 +ROM package: PLCC32 +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/advantech/pcm_5820/devicetree.cb b/src/mainboard/advantech/pcm_5820/devicetree.cb new file mode 100644 index 0000000..8027ee2 --- /dev/null +++ b/src/mainboard/advantech/pcm_5820/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/amd/gx1 # Northbridge + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + chip southbridge/amd/cs5530 # Southbridge + device pci 12.0 on # ISA bridge + chip superio/winbond/w83977f # SUper I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.4 on # RTC / On-Now control + io 0x60 = 0x70 + irq 0x70 = 8 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # IR + # TODO? + end + device pnp 3f0.7 on # GPIO 1 + # TODO? + end + device pnp 3f0.8 on # GPIO 2 + # TODO? + end + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio (onboard) + device pci 12.4 on end # VGA + device pci 13.0 on end # USB + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/amd/geode_gx1 # CPU + end +end diff --git a/src/mainboard/advantech/pcm_5820/irq_tables.c b/src/mainboard/advantech/pcm_5820/irq_tables.c new file mode 100644 index 0000000..ac25227 --- /dev/null +++ b/src/mainboard/advantech/pcm_5820/irq_tables.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x12 << 3) | 0x0, /* Interrupt router device */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x1078, /* Vendor */ + 0x2, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xde, /* Checksum */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0b << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/advantech/pcm_5820/romstage.c b/src/mainboard/advantech/pcm_5820/romstage.c new file mode 100644 index 0000000..a6b856e --- /dev/null +++ b/src/mainboard/advantech/pcm_5820/romstage.c @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "northbridge/amd/gx1/raminit.c" +#include "cpu/x86/bist.h" +#include "superio/winbond/w83977f/early_serial.c" +#include "southbridge/amd/cs5530/enable_rom.c" + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + cs5530_enable_rom(); + sdram_init(); +} diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig index cc5679a..7a2b3d9 100644 --- a/src/mainboard/amd/Kconfig +++ b/src/mainboard/amd/Kconfig @@ -41,9 +41,9 @@ config BOARD_AMD_PARMER bool "Parmer" config BOARD_AMD_THATCHER bool "Thatcher" -config BOARD_AMD_OLIVEHILL +config BOARD_AMD_DB_FT3 bool "Olive Hill" -config BOARD_AMD_OLIVEHILLPLUS +config BOARD_AMD_DB_FT3B bool "Olive Hill Plus" endchoice
@@ -61,13 +61,13 @@ source "src/mainboard/amd/tilapia_fam10/Kconfig" source "src/mainboard/amd/bimini_fam10/Kconfig" source "src/mainboard/amd/inagua/Kconfig" source "src/mainboard/amd/persimmon/Kconfig" -source "src/mainboard/amd/south_station/Kconfig" +source "src/mainboard/amd/southstation/Kconfig" source "src/mainboard/amd/torpedo/Kconfig" -source "src/mainboard/amd/union_station/Kconfig" +source "src/mainboard/amd/unionstation/Kconfig" source "src/mainboard/amd/parmer/Kconfig" source "src/mainboard/amd/thatcher/Kconfig" -source "src/mainboard/amd/olivehill/Kconfig" -source "src/mainboard/amd/olivehillplus/Kconfig" +source "src/mainboard/amd/db_ft3/Kconfig" +source "src/mainboard/amd/db_ft3b/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/amd/db_ft3/BiosCallOuts.c b/src/mainboard/amd/db_ft3/BiosCallOuts.c new file mode 100644 index 0000000..97f8769 --- /dev/null +++ b/src/mainboard/amd/db_ft3/BiosCallOuts.c @@ -0,0 +1,224 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "cbfs.h" +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) +#include "imc.h" +#endif +#include <stdlib.h> + +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * AMD Olivehill Platform ALC272 Verb Table + */ +static const CODEC_ENTRY Olivehill_Alc272_VerbTbl[] = { + {0x11, 0x411111F0}, // - SPDIF_OUT2 + {0x12, 0x411111F0}, // - DMIC_1/2 + {0x13, 0x411111F0}, // - DMIC_3/4 + {0x14, 0x411111F0}, // Port D - LOUT1 + {0x15, 0x411111F0}, // Port A - LOUT2 + {0x16, 0x411111F0}, // + {0x17, 0x411111F0}, // Port H - MONO + {0x18, 0x01a19840}, // Port B - MIC1 + {0x19, 0x411111F0}, // Port F - MIC2 + {0x1a, 0x01813030}, // Port C - LINE1 + {0x1b, 0x411111F0}, // Port E - LINE2 + {0x1d, 0x40130605}, // - PCBEEP + {0x1e, 0x01441120}, // - SPDIF_OUT1 + {0x21, 0x01214010}, // Port I - HPOUT + {0xff, 0xffffffff} +}; + +static const CODEC_TBL_LIST OlivehillCodecTableList[] = +{ + {0x10ec0272, (CODEC_ENTRY*)&Olivehill_Alc272_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +/* Olivehill Hardware Monitor Fan Control + * Hardware limitation: + * HWM failed to read the input temperture vi I2C, + * if other software switch the I2C switch by mistake or intention. + * We recommend to using IMC to control Fans, instead of HWM. + */ +static void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + /* Enable IMC fan control. the recommand way */ +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) + + imc_reg_init(); + + /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); + + /* Thermal Zone Parameter */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; + + /* IMC Fan Policy temperature thresholds */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; + + /* IMC Fan Policy PWM Settings */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ + + FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8; + + /* NOTE: + * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, + * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. + * so we remove it from AGESA code. Please Seee FchInitLateHwm. + */ + +#else /* HWM fan control, the way not recommand */ + FchParams->Imc.ImcEnable = FALSE; + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ + +#endif /* CONFIG_HUDSON_IMC_FWM */ +} + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, IMC etc. + */ +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; + + if (StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ + FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_reset->FchReset.Xhci1Enable = FALSE; + } else if (StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&OlivehillCodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + + /* Fan Control */ + oem_fan_control(FchParams_env); + + /* XHCI configuration */ + FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_env->Usb.Xhci1Enable = FALSE; + + /* sata configuration */ + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/amd/db_ft3/Kconfig b/src/mainboard/amd/db_ft3/Kconfig new file mode 100644 index 0000000..1636a9e --- /dev/null +++ b/src/mainboard/amd/db_ft3/Kconfig @@ -0,0 +1,83 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_DB_FT3 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY16_KB + select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB + select SOUTHBRIDGE_AMD_AGESA_YANGTZE + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default amd/db_ft3 + +config MAINBOARD_PART_NUMBER + string + default "DB-FT3" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config ACPI_SSDTX_NUM + int + default 0 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config HUDSON_LEGACY_FREE + bool + default y + +endif # BOARD_AMD_DB_FT3 diff --git a/src/mainboard/amd/db_ft3/Makefile.inc b/src/mainboard/amd/db_ft3/Makefile.inc new file mode 100644 index 0000000..3103f70 --- /dev/null +++ b/src/mainboard/amd/db_ft3/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/db_ft3/OptionsIds.h b/src/mainboard/amd/db_ft3/OptionsIds.h new file mode 100644 index 0000000..e006441 --- /dev/null +++ b/src/mainboard/amd/db_ft3/OptionsIds.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/amd/db_ft3/PlatformGnbPcie.c b/src/mainboard/amd/db_ft3/PlatformGnbPcie.c new file mode 100644 index 0000000..0775ad3 --- /dev/null +++ b/src/mainboard/amd/db_ft3/PlatformGnbPcie.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +static const PCIe_PORT_DESCRIPTOR PortList [] = { + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x01, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x05, 0) + } +}; + +static const PCIe_DDI_DESCRIPTOR DdiList [] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This is the stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + /* GNB PCIe topology Porting */ + + /* */ + /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ + /* */ + AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ + ASSERT(FALSE); + return; + } + + PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); + InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; +} diff --git a/src/mainboard/amd/db_ft3/PlatformGnbPcieComplex.h b/src/mainboard/amd/db_ft3/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..b3c69cf --- /dev/null +++ b/src/mainboard/amd/db_ft3/PlatformGnbPcieComplex.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/db_ft3/acpi/AmdImc.asl b/src/mainboard/amd/db_ft3/acpi/AmdImc.asl new file mode 100644 index 0000000..074dd7c --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/AmdImc.asl @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + While (LNotEqual(Local0, 0xFA)) { + Store(MRG0, Local0) + Sleep(10) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/amd/db_ft3/acpi/gpe.asl b/src/mainboard/amd/db_ft3/acpi/gpe.asl new file mode 100644 index 0000000..8d4f8a2 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/gpe.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/amd/db_ft3/acpi/ide.asl b/src/mainboard/amd/db_ft3/acpi/ide.asl new file mode 100644 index 0000000..853dc13 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/ide.asl @@ -0,0 +1,250 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No IDE functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + /* save total time of primary PIO master timing to PIO spd0 */ + Store(GTTM(PPTM), PSD0) + /* save total time of primary PIO slave Timing to PIO spd1 */ + Store(GTTM(PPTS), PSD1) + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} +#endif diff --git a/src/mainboard/amd/db_ft3/acpi/mainboard.asl b/src/mainboard/amd/db_ft3/acpi/mainboard.asl new file mode 100644 index 0000000..05523fb --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/mainboard.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +/* AcpiGpe0Blk */ +OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) + Field(GP0B, ByteAcc, NoLock, Preserve) { + , 11, + USBS, 1, +} diff --git a/src/mainboard/amd/db_ft3/acpi/routing.asl b/src/mainboard/amd/db_ft3/acpi/routing.asl new file mode 100644 index 0000000..91849ed --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/routing.asl @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F16 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 44 }, + Package(){0x0001FFFF, 1, 0, 45 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + +}) + +Name(PS2, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS2, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GFX */ +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, +}) + +/* GPP 0 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, +}) + +/* GPP 1 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GPP 2 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) + +/* GPP 3 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) diff --git a/src/mainboard/amd/db_ft3/acpi/sata.asl b/src/mainboard/amd/db_ft3/acpi/sata.asl new file mode 100644 index 0000000..3d19222 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/sata.asl @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SATA functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} +#endif diff --git a/src/mainboard/amd/db_ft3/acpi/si.asl b/src/mainboard/amd/db_ft3/acpi/si.asl new file mode 100644 index 0000000..3cc2170 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/si.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/amd/db_ft3/acpi/sleep.asl b/src/mainboard/amd/db_ft3/acpi/sleep.asl new file mode 100644 index 0000000..2fc2efe --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/sleep.asl @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ + +External(_SB.APTS, MethodObj) +External(_SB.AWAK, MethodObj) + +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) + _SB.APTS(Arg0) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + Store(1,USBS) + + _SB.AWAK(Arg0) + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/db_ft3/acpi/superio.asl b/src/mainboard/amd/db_ft3/acpi/superio.asl new file mode 100644 index 0000000..ec72e36 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/amd/db_ft3/acpi/thermal.asl b/src/mainboard/amd/db_ft3/acpi/thermal.asl new file mode 100644 index 0000000..0466a1b --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/amd/db_ft3/acpi/usb_oc.asl b/src/mainboard/amd/db_ft3/acpi/usb_oc.asl new file mode 100644 index 0000000..e0a9143 --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi/usb_oc.asl @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +/* USB Overcurrent GPEs */ + +#if 0 /* TODO: Update for Olivehill */ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + } + } +} +#endif diff --git a/src/mainboard/amd/db_ft3/acpi_tables.c b/src/mainboard/amd/db_ft3/acpi_tables.c new file mode 100644 index 0000000..a02b92c --- /dev/null +++ b/src/mainboard/amd/db_ft3/acpi_tables.c @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam16.h> + +#include "agesawrapper.h" + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + /* TODO: Remove the hardcode */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, + 0xFEC20000, 24); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/amd/db_ft3/agesawrapper.c b/src/mainboard/amd/db_ft3/agesawrapper.c new file mode 100644 index 0000000..604278b --- /dev/null +++ b/src/mainboard/amd/db_ft3/agesawrapper.c @@ -0,0 +1,625 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <cpu/x86/mtrr.h> +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "Fch.h" +#include <cpu/amd/agesa/s3_resume.h> +#include <arch/io.h> +#include <device/device.h> +#include "hudson.h" + + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; +VOID *AcpiIvrs = NULL; + +AGESA_STATUS agesawrapper_amdinitcpuio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* For serial port */ + PciData = 0xFF03FFD5; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + status = AmdInitPost (PostParams); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return Status; +} + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + + +AGESA_STATUS agesawrapper_amdinitresume(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_fchs3earlyrestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +AGESA_STATUS agesawrapper_amds3laterestore(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +AGESA_STATUS agesawrapper_fchs3laterestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +AGESA_STATUS agesawrapper_amdS3Save(void) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} + +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdreadeventlog ( + UINT8 HeapStatus + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/amd/db_ft3/agesawrapper.h b/src/mainboard/amd/db_ft3/agesawrapper.h new file mode 100644 index 0000000..9e4617d --- /dev/null +++ b/src/mainboard/amd/db_ft3/agesawrapper.h @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); +AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitcpuio(void); +void *agesawrapper_getlateinitptr (int pick); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); + +AGESA_STATUS agesawrapper_fchs3earlyrestore(void); +AGESA_STATUS agesawrapper_fchs3laterestore(void); + +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/db_ft3/board_info.txt b/src/mainboard/amd/db_ft3/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/amd/db_ft3/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/amd/db_ft3/buildOpts.c b/src/mainboard/amd/db_ft3/buildOpts.c new file mode 100644 index 0000000..5aa1768 --- /dev/null +++ b/src/mainboard/amd/db_ft3/buildOpts.c @@ -0,0 +1,507 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> +#include "AGESA.h" +//#include "CommonReturns.h" +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +#define INSTALL_FT3_SOCKET_SUPPORT TRUE +#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE + +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE +#define INSTALL_FM2_SOCKET_SUPPORT FALSE + + +#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT + #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE + #undef INSTALL_FT3_SOCKET_SUPPORT + #define INSTALL_FT3_SOCKET_SUPPORT FALSE + #endif +#endif + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_CDIT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 15000 +#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 +#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 +#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_SLEW_RATE 10000 +#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE + +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the + // core for C-state entry requests. A value + // of 0 in this field specifies that the core + // does not trap any IO addresses for C-state entry. + // Values greater than 0xFFF8 results in undefined behavior. +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE TRUE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYNC_FLOOD TRUE +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled +#define BLDCFG_IOMMU_SUPPORT FALSE +#define OPTION_GFX_INIT_SVIEW FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife + +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL +#define BLDCFG_CFG_ABM_SUPPORT TRUE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +#ifdef PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) +#endif + +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList + +//#include "KeralaInstall.h" + +/* Include the files that instantiate the configuration definitions. */ +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "CommonReturns.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +//#define DDR400_FREQUENCY 200 ///< DDR 400 +//#define DDR533_FREQUENCY 266 ///< DDR 533 +//#define DDR667_FREQUENCY 333 ///< DDR 667 +//#define DDR800_FREQUENCY 400 ///< DDR 800 +//#define DDR1066_FREQUENCY 533 ///< DDR 1066 +//#define DDR1333_FREQUENCY 667 ///< DDR 1333 +//#define DDR1600_FREQUENCY 800 ///< DDR 1600 +//#define DDR1866_FREQUENCY 933 ///< DDR 1866 +//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency +// +///* QUANDRANK_TYPE*/ +//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM +// +///* USER_MEMORY_TIMING_MODE */ +//#define TIMING_MODE_AUTO 0 ///< Use best rate possible +//#define TIMING_MODE_LIMITED 1 ///< Set user top limit +//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed +// +///* POWER_DOWN_MODE */ +//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA4 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 + +GPIO_CONTROL olivehill_gpio[] = { + {183, Function1, GpioIn | GpioOutEnB | PullUpB}, + {-1} +}; +//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&olivehill_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +// Customer table +UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); diff --git a/src/mainboard/amd/db_ft3/cmos.layout b/src/mainboard/amd/db_ft3/cmos.layout new file mode 100644 index 0000000..5520564 --- /dev/null +++ b/src/mainboard/amd/db_ft3/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/amd/db_ft3/devicetree.cb b/src/mainboard/amd/db_ft3/devicetree.cb new file mode 100644 index 0000000..3bcaaee --- /dev/null +++ b/src/mainboard/amd/db_ft3/devicetree.cb @@ -0,0 +1,76 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family16kb/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family16kb + device lapic 0 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + + chip northbridge/amd/agesa/family16kb # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + end #chip northbridge/amd/agesa/family16kb + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/amd/db_ft3/dsdt.asl b/src/mainboard/amd/db_ft3/dsdt.asl new file mode 100644 index 0000000..d2d8122 --- /dev/null +++ b/src/mainboard/amd/db_ft3/dsdt.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* System Bus */ + Scope(_SB) { /* Start _SB scope */ + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End _SB scope */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/amd/db_ft3/irq_tables.c b/src/mainboard/amd/db_ft3/irq_tables.c new file mode 100644 index 0000000..22ed1ab --- /dev/null +++ b/src/mainboard/amd/db_ft3/irq_tables.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam16.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/amd/db_ft3/mainboard.c b/src/mainboard/amd/db_ft3/mainboard.c new file mode 100644 index 0000000..ac40c84 --- /dev/null +++ b/src/mainboard/amd/db_ft3/mainboard.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "agesawrapper.h" + +/********************************************** + * enable the dedicated function in mainboard. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + if (acpi_is_wakeup_s3()) + agesawrapper_fchs3earlyrestore(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/amd/db_ft3/mptable.c b/src/mainboard/amd/db_ft3/mptable.c new file mode 100644 index 0000000..db4a3ff --- /dev/null +++ b/src/mainboard/amd/db_ft3/mptable.c @@ -0,0 +1,233 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam15.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + +u8 picr_data[0x54] = { + 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x03,0x04,0x05,0x07 +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } +#if 0 + outb(0x0B, 0xCD6); + outb(0x02, 0xCD7); + + outb(0x50, 0xCD6); + outb(0x1F, 0xCD7); + + outb(0x48, 0xCD6); + outb(0xF2, 0xCD7); + + //outb(0xBE, 0xCD6); + //outb(0x52, 0xCD7); + + outb(0xED, 0xCD6); + outb(0x17, 0xCD7); + + *(volatile u8 *) (0xFED80D00 + 0x31) = 2; + *(volatile u8 *) (0xFED80D00 + 0x32) = 2; + *(volatile u8 *) (0xFED80D00 + 0x33) = 2; + *(volatile u8 *) (0xFED80D00 + 0x34) = 2; + + *(volatile u8 *) (0xFED80100 + 0x31) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x32) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x33) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x34) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0x6c) = 1; + *(volatile u8 *) (0xFED80D00 + 0x6E) = 2; + *(volatile u8 *) (0xFED80D00 + 0x6f) = 2; + + *(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0; + *(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8; + *(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0xA6) = 2; + *(volatile u8 *) (0xFED80100 + 0xA6) = 0; + + *(volatile u8 *) (0xFED80100 + 0x40) = 0xC8; +#endif + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/db_ft3/romstage.c b/src/mainboard/amd/db_ft3/romstage.c new file mode 100644 index 0000000..4c1b18e --- /dev/null +++ b/src/mainboard/amd/db_ft3/romstage.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include "southbridge/amd/agesa/hudson/hudson.h" +#include "cpu/amd/agesa/s3_resume.h" +#include "cbmem.h" + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA + * even though the register is not documented in the Kabini BKDG. + * Otherwise the serial output is bad code. + */ + outb(0xD2, 0xcd6); + outb(0x00, 0xcd7); + + AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); + + hudson_lpc_port80(); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + + post_code(0x31); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ + int i; + for(i = 0; i < 200000; i++) + val = inb(0xcd6); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + post_code(0x38); + printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); + + post_code(0x39); + + AGESAWRAPPER(amdinitearly); + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + AGESAWRAPPER(amdinitpost); + post_code(0x41); + AGESAWRAPPER(amdinitenv); + /* TODO: Disable cache is not ok. */ + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + outb(0xEA, 0xCD6); + outb(0x1, 0xcd7); + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/amd/db_ft3b/BiosCallOuts.c b/src/mainboard/amd/db_ft3b/BiosCallOuts.c new file mode 100644 index 0000000..5720250 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/BiosCallOuts.c @@ -0,0 +1,309 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "cbfs.h" +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) +#include "imc.h" +#endif +#include <stdlib.h> + +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * Realtek ALC272 CODEC Verb Table + */ +static const CODEC_ENTRY Alc272_VerbTbl[] = { + {0x11, 0x411111F0}, // - SPDIF_OUT2 + {0x12, 0x411111F0}, // - DMIC_1/2 + {0x13, 0x411111F0}, // - DMIC_3/4 + {0x14, 0x411111F0}, // Port D - LOUT1 + {0x15, 0x411111F0}, // Port A - LOUT2 + {0x16, 0x411111F0}, // + {0x17, 0x411111F0}, // Port H - MONO + {0x18, 0x01a19840}, // Port B - MIC1 + {0x19, 0x411111F0}, // Port F - MIC2 + {0x1a, 0x01813030}, // Port C - LINE1 + {0x1b, 0x411111F0}, // Port E - LINE2 + {0x1d, 0x40251E05}, // - PCBEEP + {0x1e, 0x01441120}, // - SPDIF_OUT1 + {0x21, 0x01214010}, // Port I - HPOUT + {0xff, 0xffffffff} +}; + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +/* + * Hardware Monitor Fan Control + * Hardware limitation: + * HWM will fail to read the input temperature via I2C if other + * software switches the I2C address. AMD recommends using IMC + * to control fans, instead of HWM. + */ +static void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + FCH_HWM_FAN_CTR oem_factl[5] = { + /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ + /* DB-FT3 FanOUT0 Fan header J32 */ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + /* DB-FT3 FanOUT1 Fan header J31*/ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + }; + LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); + + /* Enable IMC fan control. the recommended way */ +#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) + + /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */ + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); + + /* Thermal Zone Parameter */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; + + /* IMC Fan Policy temperature thresholds */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; + + /* IMC Fan Policy PWM Settings */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; + + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; + + /* IMC Function */ + FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8; + + /* NOTE: + * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, + * AGESA put EcDefaultMessage as global data in ROM, so we can't override it. + * so we remove it from AGESA code. Please See FchInitLateHwm. + */ + +#else /* HWM fan control, using the alternative method */ + FchParams->Imc.ImcEnable = FALSE; + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */ + +#endif /* CONFIG_HUDSON_IMC_FWM */ +} + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, IMC etc. + */ +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr; + if (StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData; + printk(BIOS_DEBUG, "\nFch OEM config in INIT RESET\n"); + //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ + FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE; + FchParams->FchReset.SataEnable = CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_AHCI; + FchParams->FchReset.IdeEnable = CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_LEGACY_IDE; + FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams->FchReset.Xhci1Enable = FALSE; + } else if (StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + + /* Fan Control */ + oem_fan_control(FchParams); + + /* XHCI configuration */ + FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams->Usb.Xhci1Enable = FALSE; + + /* sata configuration */ + FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; + switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { + case SataRaid: + case SataAhci: + case SataAhci7804: + case SataLegacyIde: + FchParams->Sata.SataIdeMode = FALSE; + break; + case SataIde2Ahci: + case SataIde2Ahci7804: + default: /* SataNativeIde */ + FchParams->Sata.SataIdeMode = TRUE; + break; + } + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/amd/db_ft3b/Kconfig b/src/mainboard/amd/db_ft3b/Kconfig new file mode 100644 index 0000000..147c12d --- /dev/null +++ b/src/mainboard/amd/db_ft3b/Kconfig @@ -0,0 +1,83 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_DB_FT3B + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_00730F01 + select NORTHBRIDGE_AMD_AGESA_00730F01 + select SOUTHBRIDGE_AMD_AGESA_AVALON + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE +# select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_8192 + select GFXUMA + +config MAINBOARD_DIR + string + default amd/db_ft3b + +config MAINBOARD_PART_NUMBER + string + default "DB-FT3b" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config ACPI_SSDTX_NUM + int + default 0 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config HUDSON_LEGACY_FREE + bool + default y + +endif # BOARD_AMD_DB_FT3B diff --git a/src/mainboard/amd/db_ft3b/Makefile.inc b/src/mainboard/amd/db_ft3b/Makefile.inc new file mode 100644 index 0000000..ec584cb --- /dev/null +++ b/src/mainboard/amd/db_ft3b/Makefile.inc @@ -0,0 +1,26 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/db_ft3b/PlatformGnbPcie.c b/src/mainboard/amd/db_ft3b/PlatformGnbPcie.c new file mode 100644 index 0000000..71a5e6c --- /dev/null +++ b/src/mainboard/amd/db_ft3b/PlatformGnbPcie.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "PlatformGnbPcieComplex.h" + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +const PCIe_PORT_DESCRIPTOR PortList [] = { + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x01, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x05, 0) + } +}; + +const PCIe_DDI_DESCRIPTOR DdiList [] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) + }, +}; + +const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + InitEarly->GnbConfig.PcieComplexList = &PcieComplex; +} diff --git a/src/mainboard/amd/db_ft3b/PlatformGnbPcieComplex.h b/src/mainboard/amd/db_ft3b/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..cf3beb9 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/PlatformGnbPcieComplex.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include <Porting.h> +#include <AGESA.h> + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/db_ft3b/acpi/AmdImc.asl b/src/mainboard/amd/db_ft3b/acpi/AmdImc.asl new file mode 100644 index 0000000..8ff4b1c --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/AmdImc.asl @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + While (LNotEqual(Local0, 0xFA)) { + Store(MRG0, Local0) + Sleep(10) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/amd/db_ft3b/acpi/gpe.asl b/src/mainboard/amd/db_ft3b/acpi/gpe.asl new file mode 100644 index 0000000..8d4f8a2 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/gpe.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/amd/db_ft3b/acpi/ide.asl b/src/mainboard/amd/db_ft3b/acpi/ide.asl new file mode 100644 index 0000000..95d1db4 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/ide.asl @@ -0,0 +1 @@ +/* No IDE functionality */ diff --git a/src/mainboard/amd/db_ft3b/acpi/mainboard.asl b/src/mainboard/amd/db_ft3b/acpi/mainboard.asl new file mode 100644 index 0000000..05523fb --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/mainboard.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +/* AcpiGpe0Blk */ +OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) + Field(GP0B, ByteAcc, NoLock, Preserve) { + , 11, + USBS, 1, +} diff --git a/src/mainboard/amd/db_ft3b/acpi/routing.asl b/src/mainboard/amd/db_ft3b/acpi/routing.asl new file mode 100644 index 0000000..91849ed --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/routing.asl @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F16 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 44 }, + Package(){0x0001FFFF, 1, 0, 45 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + +}) + +Name(PS2, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS2, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GFX */ +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, +}) + +/* GPP 0 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, +}) + +/* GPP 1 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GPP 2 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) + +/* GPP 3 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) diff --git a/src/mainboard/amd/db_ft3b/acpi/sata.asl b/src/mainboard/amd/db_ft3b/acpi/sata.asl new file mode 100644 index 0000000..f675323 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/sata.asl @@ -0,0 +1 @@ +/* No SATA functionality */ diff --git a/src/mainboard/amd/db_ft3b/acpi/si.asl b/src/mainboard/amd/db_ft3b/acpi/si.asl new file mode 100644 index 0000000..3cc2170 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/si.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/amd/db_ft3b/acpi/sleep.asl b/src/mainboard/amd/db_ft3b/acpi/sleep.asl new file mode 100644 index 0000000..aa22879 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/sleep.asl @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +*s Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ + +External(_SB.APTS, MethodObj) +External(_SB.AWAK, MethodObj) + +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) + _SB.APTS(Arg0) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + Store(1,USBS) + + _SB.AWAK(Arg0) + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/db_ft3b/acpi/superio.asl b/src/mainboard/amd/db_ft3b/acpi/superio.asl new file mode 100644 index 0000000..69c6108 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/superio.asl @@ -0,0 +1 @@ +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/amd/db_ft3b/acpi/thermal.asl b/src/mainboard/amd/db_ft3b/acpi/thermal.asl new file mode 100644 index 0000000..edb1daf --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/thermal.asl @@ -0,0 +1 @@ +/* No thermal zone functionality */ diff --git a/src/mainboard/amd/db_ft3b/acpi/usb_oc.asl b/src/mainboard/amd/db_ft3b/acpi/usb_oc.asl new file mode 100644 index 0000000..8dae1df --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi/usb_oc.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + diff --git a/src/mainboard/amd/db_ft3b/acpi_tables.c b/src/mainboard/amd/db_ft3b/acpi_tables.c new file mode 100644 index 0000000..e066f15 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/acpi_tables.c @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam16.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + /* TODO: Remove the hardcode */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, + 0xFEC20000, 24); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/amd/db_ft3b/agesawrapper.c b/src/mainboard/amd/db_ft3b/agesawrapper.c new file mode 100644 index 0000000..45670bd --- /dev/null +++ b/src/mainboard/amd/db_ft3b/agesawrapper.c @@ -0,0 +1,658 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <config.h> +#include <cpu/x86/mtrr.h> +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "Fch.h" +#include <cpu/amd/agesa/s3_resume.h> +#include <arch/io.h> +#include <device/device.h> +#include "hudson.h" + +VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); +VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#ifndef __PRE_RAM__ +/* ACPI table pointers returned by AmdInitLate */ +static void *DmiTable = NULL; +static void *AcpiPstate = NULL; +static void *AcpiSrat = NULL; +static void *AcpiSlit = NULL; + +static void *AcpiWheaMce = NULL; +static void *AcpiWheaCmc = NULL; +static void *AcpiAlib = NULL; +static void *AcpiIvrs = NULL; +#endif + +AGESA_STATUS agesawrapper_amdinitcpuio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* For serial port */ + PciData = 0xFF03FFD5; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* PSP */ + //PciData = 0xD; + //PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x8, 0x0, 0x48); + //LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResetParams.FchInterface.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + AmdResetParams.FchInterface.Xhci1Enable = FALSE; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + //PspBarInitEarly (); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + + // Do not use IS_ENABLED here. CONFIG_GFXUMA should always have a value. Allow + // the compiler to flag the error if CONFIG_GFXUMA is not set. + PostParams->MemConfig.UmaMode = CONFIG_GFXUMA ? UMA_AUTO : UMA_NONE; + PostParams->MemConfig.UmaSize = 0; + status = AmdInitPost (PostParams); + printk( + BIOS_SPEW, + "setup_uma_memory: syslimit 0x%08llX, bottomio 0x%08lx\n", + (unsigned long long)(PostParams->MemConfig.SysLimit) << 16, + (unsigned long)(PostParams->MemConfig.BottomIo) << 16 + ); + printk( + BIOS_SPEW, + "setup_uma_memory: uma size %luMB, uma start 0x%08lx\n", + (unsigned long)(PostParams->MemConfig.UmaSize) >> (20 - 16), + (unsigned long)(PostParams->MemConfig.UmaBase) << 16 + ); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return status; +} + +#ifndef __PRE_RAM__ +VOID* agesawrapper_getlateinitptr (int pick) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} +#endif + +AGESA_STATUS agesawrapper_amdinitmid(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_amdinitlate(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return Status; +} +#endif + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#if CONFIG_HAVE_ACPI_RESUME + +AGESA_STATUS agesawrapper_amdinitresume(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_fchs3earlyrestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +AGESA_STATUS agesawrapper_amds3laterestore(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +AGESA_STATUS agesawrapper_fchs3laterestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +AGESA_STATUS agesawrapper_amdS3Save(void) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + +// Status = OemAgesaSaveS3Info ( +// S3DataType, +// AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, +// AmdS3SaveParamsPtr->S3DataBlock.NvStorage); +// PspMboxBiosCmdS3Info (AmdS3SaveParamsPtr->S3DataBlock.NvStorage, AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize); + + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} + +#endif /* #ifndef __PRE_RAM__ */ +#endif /* CONFIG_HAVE_ACPI_RESUME */ + +AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/amd/db_ft3b/agesawrapper.h b/src/mainboard/amd/db_ft3b/agesawrapper.h new file mode 100644 index 0000000..6d2e802 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/agesawrapper.h @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD APU and SoC SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); +AGESA_STATUS agesawrapper_amdreadeventlog(UINT8 HeapStatus); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitcpuio(void); +void *agesawrapper_getlateinitptr(int pick); +AGESA_STATUS agesawrapper_amdlaterunaptask(UINT32 Func, UINT32 Data, void *ConfigPtr); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); + +AGESA_STATUS agesawrapper_fchs3earlyrestore(void); +AGESA_STATUS agesawrapper_fchs3laterestore(void); + +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/db_ft3b/board_info.txt b/src/mainboard/amd/db_ft3b/board_info.txt new file mode 100644 index 0000000..d2c6670 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/board_info.txt @@ -0,0 +1,6 @@ +Board name: DB-FT3b (Olive Hill+) +Board URL: http://wwwd.amd.com/amd/devsite.nsf/platforms/DB-FT3.htm +Category: eval +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/amd/db_ft3b/cmos.layout b/src/mainboard/amd/db_ft3b/cmos.layout new file mode 100644 index 0000000..5520564 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/amd/db_ft3b/devicetree.cb b/src/mainboard/amd/db_ft3b/devicetree.cb new file mode 100644 index 0000000..a00e2ba --- /dev/null +++ b/src/mainboard/amd/db_ft3b/devicetree.cb @@ -0,0 +1,75 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/00730F01/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/00730F01 + device lapic 0 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/00730F01 # CPU side of HT root complex + + chip northbridge/amd/agesa/00730F01 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + end #chip northbridge/amd/agesa/00730F01 + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + register "spdAddrLookup" = " + { + { {0xA0, 0xA2} }, // socket 0, channel 0, slots 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/00730F01 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/00730F01/root_complex diff --git a/src/mainboard/amd/db_ft3b/dsdt.asl b/src/mainboard/amd/db_ft3b/dsdt.asl new file mode 100644 index 0000000..15bcd3d --- /dev/null +++ b/src/mainboard/amd/db_ft3b/dsdt.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/00730F01/acpi/cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* System Bus */ + Scope(_SB) { /* Start _SB scope */ + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/00730F01/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End _SB scope */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/amd/db_ft3b/irq_tables.c b/src/mainboard/amd/db_ft3b/irq_tables.c new file mode 100644 index 0000000..22ed1ab --- /dev/null +++ b/src/mainboard/amd/db_ft3b/irq_tables.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam16.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/amd/db_ft3b/mainboard.c b/src/mainboard/amd/db_ft3b/mainboard.c new file mode 100644 index 0000000..6073fd4 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/mainboard.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "agesawrapper.h" +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> + +/********************************************** + * enable the dedicated function in mainboard. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + if (acpi_is_wakeup_s3()) + agesawrapper_fchs3earlyrestore(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/amd/db_ft3b/mptable.c b/src/mainboard/amd/db_ft3b/mptable.c new file mode 100644 index 0000000..73660e4 --- /dev/null +++ b/src/mainboard/amd/db_ft3b/mptable.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam15.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <southbridge/amd/agesa/hudson/hudson.h> /* pm_ioread() */ + +u8 picr_data[0x54] = { + 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x03,0x04,0x05,0x07 +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/db_ft3b/romstage.c b/src/mainboard/amd/db_ft3b/romstage.c new file mode 100644 index 0000000..6f300ce --- /dev/null +++ b/src/mainboard/amd/db_ft3b/romstage.c @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include "southbridge/amd/agesa/hudson/hudson.h" +#include "cpu/amd/agesa/s3_resume.h" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + volatile int halt = 0; + + /* + * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". This following register setting has been + * replicated in every reference design since Parmer, so it is + * believed to be required even though it is not documented in + * the SoC BKDGs. Without this setting, there is no serial + * output. + */ + outb(0xD2, 0xcd6); + outb(0x00, 0xcd7); + + AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); + + hudson_lpc_port80(); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + + post_code(0x31); + console_init(); + } + + if(boot_cpu()) { + while(halt); + } + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + + /* + * This refers to LpcClkDrvSth settling time. Without this setting, processor + * initialization is slow or incorrect, so this wait has been replicated from + * earlier development boards. + */ + { + int i; + for(i = 0; i < 200000; i++) inb(0xCD6); + } + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x38); + printk(BIOS_DEBUG, "Got past avalon_early_setup\n"); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + AGESAWRAPPER(amdinitpost); + + //PspMboxBiosCmdDramInfo(); + post_code(0x41); + AGESAWRAPPER(amdinitenv); + /* + If code hangs here, please check cahaltasm.S + */ + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + outb(0xEA, 0xCD6); + outb(0x1, 0xcd7); + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.c b/src/mainboard/amd/olivehill/BiosCallOuts.c deleted file mode 100644 index 97f8769..0000000 --- a/src/mainboard/amd/olivehill/BiosCallOuts.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "Ids.h" -#include "OptionsIds.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "cbfs.h" -#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) -#include "imc.h" -#endif -#include <stdlib.h> - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * AMD Olivehill Platform ALC272 Verb Table - */ -static const CODEC_ENTRY Olivehill_Alc272_VerbTbl[] = { - {0x11, 0x411111F0}, // - SPDIF_OUT2 - {0x12, 0x411111F0}, // - DMIC_1/2 - {0x13, 0x411111F0}, // - DMIC_3/4 - {0x14, 0x411111F0}, // Port D - LOUT1 - {0x15, 0x411111F0}, // Port A - LOUT2 - {0x16, 0x411111F0}, // - {0x17, 0x411111F0}, // Port H - MONO - {0x18, 0x01a19840}, // Port B - MIC1 - {0x19, 0x411111F0}, // Port F - MIC2 - {0x1a, 0x01813030}, // Port C - LINE1 - {0x1b, 0x411111F0}, // Port E - LINE2 - {0x1d, 0x40130605}, // - PCBEEP - {0x1e, 0x01441120}, // - SPDIF_OUT1 - {0x21, 0x01214010}, // Port I - HPOUT - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST OlivehillCodecTableList[] = -{ - {0x10ec0272, (CODEC_ENTRY*)&Olivehill_Alc272_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* Olivehill Hardware Monitor Fan Control - * Hardware limitation: - * HWM failed to read the input temperture vi I2C, - * if other software switch the I2C switch by mistake or intention. - * We recommend to using IMC to control Fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - /* Enable IMC fan control. the recommand way */ -#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) - - imc_reg_init(); - - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, - * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. - * so we remove it from AGESA code. Please Seee FchInitLateHwm. - */ - -#else /* HWM fan control, the way not recommand */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ - -#endif /* CONFIG_HUDSON_IMC_FWM */ -} - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; - - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_reset->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&OlivehillCodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - oem_fan_control(FchParams_env); - - /* XHCI configuration */ - FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_env->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/amd/olivehill/Kconfig b/src/mainboard/amd/olivehill/Kconfig deleted file mode 100644 index a089d21..0000000 --- a/src/mainboard/amd/olivehill/Kconfig +++ /dev/null @@ -1,83 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_AMD_OLIVEHILL - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY16_KB - select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB - select SOUTHBRIDGE_AMD_AGESA_YANGTZE - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default amd/olivehill - -config MAINBOARD_PART_NUMBER - string - default "DB-FT3" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config ACPI_SSDTX_NUM - int - default 0 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -endif # BOARD_AMD_OLIVEHILL diff --git a/src/mainboard/amd/olivehill/Makefile.inc b/src/mainboard/amd/olivehill/Makefile.inc deleted file mode 100644 index 3103f70..0000000 --- a/src/mainboard/amd/olivehill/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/olivehill/OptionsIds.h b/src/mainboard/amd/olivehill/OptionsIds.h deleted file mode 100644 index e006441..0000000 --- a/src/mainboard/amd/olivehill/OptionsIds.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_CONTROL_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE -//#define IDSOPT_PERF_ANALYSIS TRUE -#define IDSOPT_ASSERT_ENABLED TRUE -//#undef IDSOPT_DEBUG_ENABLED -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/amd/olivehill/PlatformGnbPcie.c b/src/mainboard/amd/olivehill/PlatformGnbPcie.c deleted file mode 100644 index 0775ad3..0000000 --- a/src/mainboard/amd/olivehill/PlatformGnbPcie.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "heapManager.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" - -#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE - -static const PCIe_PORT_DESCRIPTOR PortList [] = { - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x01, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList [] = { - /* DP0 to HDMI0/DP */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - }, - /* DP1 to FCH */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - }, - /* DP2 to HDMI1/DP */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) - }, -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This is the stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - /* GNB PCIe topology Porting */ - - /* */ - /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ - /* */ - AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ - ASSERT(FALSE); - return; - } - - PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); - InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; -} diff --git a/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h b/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h deleted file mode 100644 index b3c69cf..0000000 --- a/src/mainboard/amd/olivehill/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/olivehill/acpi/AmdImc.asl b/src/mainboard/amd/olivehill/acpi/AmdImc.asl deleted file mode 100644 index 074dd7c..0000000 --- a/src/mainboard/amd/olivehill/acpi/AmdImc.asl +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//BTDC Due to IMC Fan, ACPI control codes -OperationRegion(IMIO, SystemIO, 0x3E, 0x02) -Field(IMIO , ByteAcc, NoLock, Preserve) { - IMCX,8, - IMCA,8 -} - -IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { - Offset(0x80), - MSTI, 8, - MITS, 8, - MRG0, 8, - MRG1, 8, - MRG2, 8, - MRG3, 8, -} - -Method(WACK, 0) -{ - Store(0, Local0) - While (LNotEqual(Local0, 0xFA)) { - Store(MRG0, Local0) - Sleep(10) - } -} - -//Init -Method (ITZE, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} - -//Sleep -Method (IMSP, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(1, MRG1) - Store(0, MRG2) - Store(0x98, MSTI) - WACK() - - Store(0, MRG0) - Store(0xB4, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() -} - -//Wake -Method (IMWK, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} diff --git a/src/mainboard/amd/olivehill/acpi/gpe.asl b/src/mainboard/amd/olivehill/acpi/gpe.asl deleted file mode 100644 index 8d4f8a2..0000000 --- a/src/mainboard/amd/olivehill/acpi/gpe.asl +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/amd/olivehill/acpi/ide.asl b/src/mainboard/amd/olivehill/acpi/ide.asl deleted file mode 100644 index 853dc13..0000000 --- a/src/mainboard/amd/olivehill/acpi/ide.asl +++ /dev/null @@ -1,250 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No IDE functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - /* save total time of primary PIO master timing to PIO spd0 */ - Store(GTTM(PPTM), PSD0) - /* save total time of primary PIO slave Timing to PIO spd1 */ - Store(GTTM(PPTS), PSD1) - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} -#endif diff --git a/src/mainboard/amd/olivehill/acpi/mainboard.asl b/src/mainboard/amd/olivehill/acpi/mainboard.asl deleted file mode 100644 index 05523fb..0000000 --- a/src/mainboard/amd/olivehill/acpi/mainboard.asl +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -/* AcpiGpe0Blk */ -OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} diff --git a/src/mainboard/amd/olivehill/acpi/routing.asl b/src/mainboard/amd/olivehill/acpi/routing.asl deleted file mode 100644 index 91849ed..0000000 --- a/src/mainboard/amd/olivehill/acpi/routing.asl +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 44 }, - Package(){0x0001FFFF, 1, 0, 45 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 18 }, - Package(){0x0002FFFF, 1, 0, 19 }, - Package(){0x0002FFFF, 2, 0, 16 }, - Package(){0x0002FFFF, 3, 0, 17 }, - - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) diff --git a/src/mainboard/amd/olivehill/acpi/sata.asl b/src/mainboard/amd/olivehill/acpi/sata.asl deleted file mode 100644 index 3d19222..0000000 --- a/src/mainboard/amd/olivehill/acpi/sata.asl +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No SATA functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} -#endif diff --git a/src/mainboard/amd/olivehill/acpi/si.asl b/src/mainboard/amd/olivehill/acpi/si.asl deleted file mode 100644 index 3cc2170..0000000 --- a/src/mainboard/amd/olivehill/acpi/si.asl +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/amd/olivehill/acpi/sleep.asl b/src/mainboard/amd/olivehill/acpi/sleep.asl deleted file mode 100644 index 2fc2efe..0000000 --- a/src/mainboard/amd/olivehill/acpi/sleep.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ - -External(_SB.APTS, MethodObj) -External(_SB.AWAK, MethodObj) - -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) - _SB.APTS(Arg0) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - Store(1,USBS) - - _SB.AWAK(Arg0) - - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/olivehill/acpi/superio.asl b/src/mainboard/amd/olivehill/acpi/superio.asl deleted file mode 100644 index ec72e36..0000000 --- a/src/mainboard/amd/olivehill/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/amd/olivehill/acpi/thermal.asl b/src/mainboard/amd/olivehill/acpi/thermal.asl deleted file mode 100644 index 0466a1b..0000000 --- a/src/mainboard/amd/olivehill/acpi/thermal.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No thermal zone functionality */ diff --git a/src/mainboard/amd/olivehill/acpi/usb_oc.asl b/src/mainboard/amd/olivehill/acpi/usb_oc.asl deleted file mode 100644 index e0a9143..0000000 --- a/src/mainboard/amd/olivehill/acpi/usb_oc.asl +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -/* USB Overcurrent GPEs */ - -#if 0 /* TODO: Update for Olivehill */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - } - } -} -#endif diff --git a/src/mainboard/amd/olivehill/acpi_tables.c b/src/mainboard/amd/olivehill/acpi_tables.c deleted file mode 100644 index a02b92c..0000000 --- a/src/mainboard/amd/olivehill/acpi_tables.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam16.h> - -#include "agesawrapper.h" - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - 0xFEC20000, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *alib; - acpi_header_t *ivrs; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; /* it will used by fadt */ - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ /* it needs 64 bit alignment */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; /* it will be used by fadt */ - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); - ivrs = agesawrapper_getlateinitptr(PICK_IVRS); - if (ivrs != NULL) { - memcpy((void *)current, ivrs, ivrs->length); - ivrs = (acpi_header_t *) current; - current += ivrs->length; - acpi_add_table(rsdp, ivrs); - } else { - printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); - } - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* ALIB */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } - else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - } - else { - printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); - } - acpi_add_table(rsdp,ssdt); - - printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/amd/olivehill/agesawrapper.c b/src/mainboard/amd/olivehill/agesawrapper.c deleted file mode 100644 index 604278b..0000000 --- a/src/mainboard/amd/olivehill/agesawrapper.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <cpu/x86/mtrr.h> -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "cpuRegisters.h" -#include "cpuCacheInit.h" -#include "cpuApicUtilities.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "Dispatcher.h" -#include "cpuCacheInit.h" -#include "amdlib.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "Fch.h" -#include <cpu/amd/agesa/s3_resume.h> -#include <arch/io.h> -#include <device/device.h> -#include "hudson.h" - - -#define FILECODE UNASSIGNED_FILE_FILECODE - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; -VOID *AcpiIvrs = NULL; - -AGESA_STATUS agesawrapper_amdinitcpuio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; /* last address before non-posted range */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* For serial port */ - PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Set ROM cache onto WP to decrease post time */ - MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - LibAmdMemFill (&AmdResetParams, - 0, - sizeof (AMD_RESET_PARAMS), - &(AmdResetParams.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_POST_PARAMS *PostParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; - status = AmdInitPost (PostParams); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_ENV_PARAMS *EnvParam; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - status = AmdCreateStruct (&AmdParamStruct); - EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; - - status = AmdInitEnv (EnvParam); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - case PICK_IVRS: - return AcpiIvrs; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS *AmdLateParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ - AmdCreateStruct(&AmdParamStruct); - AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; - Status = AmdInitLate(AmdLateParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParams->DmiTable; - AcpiPstate = AmdLateParams->AcpiPState; - AcpiSrat = AmdLateParams->AcpiSrat; - AcpiSlit = AmdLateParams->AcpiSlit; - - AcpiWheaMce = AmdLateParams->AcpiWheaMce; - AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; - AcpiAlib = AmdLateParams->AcpiAlib; - AcpiIvrs = AmdLateParams->AcpiIvrs; - - printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," - "AcpiSlit:%x, Mce:%x, Cmc:%x," - "Alib:%x, AcpiIvrs:%x in %s\n", - (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, - (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, - (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); - - /* AmdReleaseStruct (&AmdParamStruct); */ - return Status; -} - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - LibAmdMemFill (&ApExeParams, - 0, - sizeof (AP_EXE_PARAMS), - &(ApExeParams.StdHeader)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - /* agesawrapper_amdreadeventlog(); */ - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - - -AGESA_STATUS agesawrapper_amdinitresume(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_fchs3earlyrestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - - FchInitS3EarlyRestore(&FchParams); - - return status; -} -#endif - -AGESA_STATUS agesawrapper_amds3laterestore(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - agesawrapper_amdinitcpuio(); - LibAmdMemFill (&AmdS3LateParams, - 0, - sizeof (AMD_S3LATE_PARAMS), - &(AmdS3LateParams.StdHeader)); - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ - -extern UINT8 picr_data[0x54], intr_data[0x54]; - -AGESA_STATUS agesawrapper_fchs3laterestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - UINT8 byte; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - FchInitS3LateRestore(&FchParams); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - return status; -} -#endif - -#ifndef __PRE_RAM__ - -AGESA_STATUS agesawrapper_amdS3Save(void) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdInterfaceParams, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdInterfaceParams.StdHeader)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - - AmdCreateStruct(&AmdInterfaceParams); - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save(AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - } - OemAgesaSaveMtrr(); - - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} - -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdreadeventlog ( - UINT8 HeapStatus - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - LibAmdMemFill (&AmdEventParams, - 0, - sizeof (EVENT_PARAMS), - &(AmdEventParams.StdHeader)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - AmdEventParams.StdHeader.HeapStatus = HeapStatus; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/amd/olivehill/agesawrapper.h b/src/mainboard/amd/olivehill/agesawrapper.h deleted file mode 100644 index 9e4617d..0000000 --- a/src/mainboard/amd/olivehill/agesawrapper.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ - PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); -AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitcpuio(void); -void *agesawrapper_getlateinitptr (int pick); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); - -AGESA_STATUS agesawrapper_fchs3earlyrestore(void); -AGESA_STATUS agesawrapper_fchs3laterestore(void); - -#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/olivehill/board_info.txt b/src/mainboard/amd/olivehill/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/amd/olivehill/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/amd/olivehill/buildOpts.c b/src/mainboard/amd/olivehill/buildOpts.c deleted file mode 100644 index 5aa1768..0000000 --- a/src/mainboard/amd/olivehill/buildOpts.c +++ /dev/null @@ -1,507 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> -#include "AGESA.h" -//#include "CommonReturns.h" -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - -#define INSTALL_FT3_SOCKET_SUPPORT TRUE -#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE - -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP2_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT FALSE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE -#define INSTALL_FM2_SOCKET_SUPPORT FALSE - - -#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT - #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE - #undef INSTALL_FT3_SOCKET_SUPPORT - #define INSTALL_FT3_SOCKET_SUPPORT FALSE - #endif -#endif - -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE -#define BLDOPT_REMOVE_SRAT FALSE //TRUE -#define BLDOPT_REMOVE_SLIT FALSE //TRUE -#define BLDOPT_REMOVE_WHEA FALSE //TRUE -#define BLDOPT_REMOVE_CRAT TRUE -#define BLDOPT_REMOVE_CDIT TRUE -#define BLDOPT_REMOVE_DMI TRUE -//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -//This element selects whether P-States should be forced to be independent, -// as reported by the ACPI _PSD object. For single-link processors, -// setting TRUE for OS to support this feature. - -//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 15000 -#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 -#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 -#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 -#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_SLEW_RATE 10000 -#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE - -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the - // core for C-state entry requests. A value - // of 0 in this field specifies that the core - // does not trap any IO addresses for C-state entry. - // Values greater than 0xFFF8 results in undefined behavior. -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE TRUE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_DRAM_RATE 0 -#define BLDCFG_SCRUB_L2_RATE 0 -#define BLDCFG_SCRUB_L3_RATE 0 -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_SCRUB_DC_RATE 0 -#define BLDCFG_ECC_SYNC_FLOOD TRUE -#define BLDCFG_ECC_SYMBOL_SIZE 4 -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul -#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled -#define BLDCFG_IOMMU_SUPPORT FALSE -#define OPTION_GFX_INIT_SVIEW FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife - -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL -#define BLDCFG_CFG_ABM_SUPPORT TRUE - -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID -//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID -//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID - -#ifdef PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) -#endif - -#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' -#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed - -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE -/* - * Customized OEM build configurations for FCH component - */ -// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 -// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 -// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 -// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 -// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 -// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 -// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 -// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 -// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 -// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 -// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 -// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 -// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 -// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 -// #define BLDCFG_AZALIA_SSID 0x780D1022 -// #define BLDCFG_SMBUS_SSID 0x780B1022 -// #define BLDCFG_IDE_SSID 0x780C1022 -// #define BLDCFG_SATA_AHCI_SSID 0x78011022 -// #define BLDCFG_SATA_IDE_SSID 0x78001022 -// #define BLDCFG_SATA_RAID5_SSID 0x78031022 -// #define BLDCFG_SATA_RAID_SSID 0x78021022 -// #define BLDCFG_EHCI_SSID 0x78081022 -// #define BLDCFG_OHCI_SSID 0x78071022 -// #define BLDCFG_LPC_SSID 0x780E1022 -// #define BLDCFG_SD_SSID 0x78061022 -// #define BLDCFG_XHCI_SSID 0x78121022 -// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE -// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 -// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE - -CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, - { CPU_LIST_TERMINAL } -}; - -#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList - -//#include "KeralaInstall.h" - -/* Include the files that instantiate the configuration definitions. */ -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "CommonReturns.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -//#define DDR400_FREQUENCY 200 ///< DDR 400 -//#define DDR533_FREQUENCY 266 ///< DDR 533 -//#define DDR667_FREQUENCY 333 ///< DDR 667 -//#define DDR800_FREQUENCY 400 ///< DDR 800 -//#define DDR1066_FREQUENCY 533 ///< DDR 1066 -//#define DDR1333_FREQUENCY 667 ///< DDR 1333 -//#define DDR1600_FREQUENCY 800 ///< DDR 1600 -//#define DDR1866_FREQUENCY 933 ///< DDR 1866 -//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 -//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 -//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 -//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency -// -///* QUANDRANK_TYPE*/ -//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM -// -///* USER_MEMORY_TIMING_MODE */ -//#define TIMING_MODE_AUTO 0 ///< Use best rate possible -//#define TIMING_MODE_LIMITED 1 ///< Set user top limit -//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed -// -///* POWER_DOWN_MODE */ -//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 -#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 -#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 -#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 -#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 -#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 -#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 -#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 -#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 -#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 -#define DFLT_HPET_BASE_ADDRESS 0xFED00000 -#define DFLT_SMI_CMD_PORT 0xB0 -#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 -#define DFLT_GEC_BASE_ADDRESS 0xFED61000 -#define DFLT_AZALIA_SSID 0x780D1022 -#define DFLT_SMBUS_SSID 0x780B1022 -#define DFLT_IDE_SSID 0x780C1022 -#define DFLT_SATA_AHCI_SSID 0x78011022 -#define DFLT_SATA_IDE_SSID 0x78001022 -#define DFLT_SATA_RAID5_SSID 0x78031022 -#define DFLT_SATA_RAID_SSID 0x78021022 -#define DFLT_EHCI_SSID 0x78081022 -#define DFLT_OHCI_SSID 0x78071022 -#define DFLT_LPC_SSID 0x780E1022 -#define DFLT_SD_SSID 0x78061022 -#define DFLT_XHCI_SSID 0x78121022 -#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE -#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -#define DFLT_FCH_GPP_LINK_CONFIG PortA4 -#define DFLT_FCH_GPP_PORT0_PRESENT FALSE -#define DFLT_FCH_GPP_PORT1_PRESENT FALSE -#define DFLT_FCH_GPP_PORT2_PRESENT FALSE -#define DFLT_FCH_GPP_PORT3_PRESENT FALSE -#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE -//#define BLDCFG_IR_PIN_CONTROL 0x33 - -GPIO_CONTROL olivehill_gpio[] = { - {183, Function1, GpioIn | GpioOutEnB | PullUpB}, - {-1} -}; -//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&olivehill_gpio[0]) - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -// Customer table -UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); diff --git a/src/mainboard/amd/olivehill/cmos.layout b/src/mainboard/amd/olivehill/cmos.layout deleted file mode 100644 index 5520564..0000000 --- a/src/mainboard/amd/olivehill/cmos.layout +++ /dev/null @@ -1,114 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/olivehill/devicetree.cb b/src/mainboard/amd/olivehill/devicetree.cb deleted file mode 100644 index 3bcaaee..0000000 --- a/src/mainboard/amd/olivehill/devicetree.cb +++ /dev/null @@ -1,76 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2013 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family16kb/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family16kb - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family16kb # CPU side of HT root complex - - chip northbridge/amd/agesa/family16kb # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - end #chip northbridge/amd/agesa/family16kb - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/hudson - - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/amd/olivehill/dsdt.asl b/src/mainboard/amd/olivehill/dsdt.asl deleted file mode 100644 index d2d8122..0000000 --- a/src/mainboard/amd/olivehill/dsdt.asl +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> - - /* Describe the processor tree (_PR) */ - #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> - - } /* End _SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c deleted file mode 100644 index 22ed1ab..0000000 --- a/src/mainboard/amd/olivehill/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam16.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/olivehill/mainboard.c b/src/mainboard/amd/olivehill/mainboard.c deleted file mode 100644 index ac40c84..0000000 --- a/src/mainboard/amd/olivehill/mainboard.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <arch/acpi.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <cpu/amd/agesa/s3_resume.h> -#include "agesawrapper.h" - -/********************************************** - * enable the dedicated function in mainboard. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - if (acpi_is_wakeup_s3()) - agesawrapper_fchs3earlyrestore(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/olivehill/mptable.c b/src/mainboard/amd/olivehill/mptable.c deleted file mode 100644 index db4a3ff..0000000 --- a/src/mainboard/amd/olivehill/mptable.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam15.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ - -u8 picr_data[0x54] = { - 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x03,0x04,0x05,0x07 -}; -u8 intr_data[0x54] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 byte; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - //mptable_write_buses(mc, NULL, &bus_isa); - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } -#if 0 - outb(0x0B, 0xCD6); - outb(0x02, 0xCD7); - - outb(0x50, 0xCD6); - outb(0x1F, 0xCD7); - - outb(0x48, 0xCD6); - outb(0xF2, 0xCD7); - - //outb(0xBE, 0xCD6); - //outb(0x52, 0xCD7); - - outb(0xED, 0xCD6); - outb(0x17, 0xCD7); - - *(volatile u8 *) (0xFED80D00 + 0x31) = 2; - *(volatile u8 *) (0xFED80D00 + 0x32) = 2; - *(volatile u8 *) (0xFED80D00 + 0x33) = 2; - *(volatile u8 *) (0xFED80D00 + 0x34) = 2; - - *(volatile u8 *) (0xFED80100 + 0x31) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x32) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x33) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x34) = 0xa0; - - *(volatile u8 *) (0xFED80D00 + 0x6c) = 1; - *(volatile u8 *) (0xFED80D00 + 0x6E) = 2; - *(volatile u8 *) (0xFED80D00 + 0x6f) = 2; - - *(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0; - *(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8; - *(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0; - - *(volatile u8 *) (0xFED80D00 + 0xA6) = 2; - *(volatile u8 *) (0xFED80100 + 0xA6) = 0; - - *(volatile u8 *) (0xFED80100 + 0x40) = 0xC8; -#endif - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/olivehill/romstage.c b/src/mainboard/amd/olivehill/romstage.c deleted file mode 100644 index 4c1b18e..0000000 --- a/src/mainboard/amd/olivehill/romstage.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/lapic.h" -#include "southbridge/amd/agesa/hudson/hudson.h" -#include "cpu/amd/agesa/s3_resume.h" -#include "cbmem.h" - - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA - * even though the register is not documented in the Kabini BKDG. - * Otherwise the serial output is bad code. - */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); - - AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); - - hudson_lpc_port80(); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - - post_code(0x31); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ - int i; - for(i = 0; i < 200000; i++) - val = inb(0xcd6); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - post_code(0x38); - printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); - - post_code(0x39); - - AGESAWRAPPER(amdinitearly); - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - AGESAWRAPPER(amdinitpost); - post_code(0x41); - AGESAWRAPPER(amdinitenv); - /* TODO: Disable cache is not ok. */ - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/amd/olivehillplus/BiosCallOuts.c b/src/mainboard/amd/olivehillplus/BiosCallOuts.c deleted file mode 100644 index 5720250..0000000 --- a/src/mainboard/amd/olivehillplus/BiosCallOuts.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "Ids.h" -#include "OptionsIds.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "cbfs.h" -#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) -#include "imc.h" -#endif -#include <stdlib.h> - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * Realtek ALC272 CODEC Verb Table - */ -static const CODEC_ENTRY Alc272_VerbTbl[] = { - {0x11, 0x411111F0}, // - SPDIF_OUT2 - {0x12, 0x411111F0}, // - DMIC_1/2 - {0x13, 0x411111F0}, // - DMIC_3/4 - {0x14, 0x411111F0}, // Port D - LOUT1 - {0x15, 0x411111F0}, // Port A - LOUT2 - {0x16, 0x411111F0}, // - {0x17, 0x411111F0}, // Port H - MONO - {0x18, 0x01a19840}, // Port B - MIC1 - {0x19, 0x411111F0}, // Port F - MIC2 - {0x1a, 0x01813030}, // Port C - LINE1 - {0x1b, 0x411111F0}, // Port E - LINE2 - {0x1d, 0x40251E05}, // - PCBEEP - {0x1e, 0x01441120}, // - SPDIF_OUT1 - {0x21, 0x01214010}, // Port I - HPOUT - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* - * Hardware Monitor Fan Control - * Hardware limitation: - * HWM will fail to read the input temperature via I2C if other - * software switches the I2C address. AMD recommends using IMC - * to control fans, instead of HWM. - */ -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - FCH_HWM_FAN_CTR oem_factl[5] = { - /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ - /* DB-FT3 FanOUT0 Fan header J32 */ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - /* DB-FT3 FanOUT1 Fan header J31*/ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - }; - LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); - - /* Enable IMC fan control. the recommended way */ -#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) - - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; - - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; - - /* IMC Function */ - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, - * AGESA put EcDefaultMessage as global data in ROM, so we can't override it. - * so we remove it from AGESA code. Please See FchInitLateHwm. - */ - -#else /* HWM fan control, using the alternative method */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */ - -#endif /* CONFIG_HUDSON_IMC_FWM */ -} - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr; - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData; - printk(BIOS_DEBUG, "\nFch OEM config in INIT RESET\n"); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE; - FchParams->FchReset.SataEnable = CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_AHCI; - FchParams->FchReset.IdeEnable = CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_LEGACY_IDE; - FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - oem_fan_control(FchParams); - - /* XHCI configuration */ - FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; - switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { - case SataRaid: - case SataAhci: - case SataAhci7804: - case SataLegacyIde: - FchParams->Sata.SataIdeMode = FALSE; - break; - case SataIde2Ahci: - case SataIde2Ahci7804: - default: /* SataNativeIde */ - FchParams->Sata.SataIdeMode = TRUE; - break; - } - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/amd/olivehillplus/Kconfig b/src/mainboard/amd/olivehillplus/Kconfig deleted file mode 100644 index a61859f..0000000 --- a/src/mainboard/amd/olivehillplus/Kconfig +++ /dev/null @@ -1,83 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_AMD_OLIVEHILLPLUS - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_00730F01 - select NORTHBRIDGE_AMD_AGESA_00730F01 - select SOUTHBRIDGE_AMD_AGESA_AVALON - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE -# select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_8192 - select GFXUMA - -config MAINBOARD_DIR - string - default amd/olivehillplus - -config MAINBOARD_PART_NUMBER - string - default "DB-FT3b" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config ACPI_SSDTX_NUM - int - default 0 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -endif # BOARD_AMD_OLIVEHILLPLUS diff --git a/src/mainboard/amd/olivehillplus/Makefile.inc b/src/mainboard/amd/olivehillplus/Makefile.inc deleted file mode 100644 index ec584cb..0000000 --- a/src/mainboard/amd/olivehillplus/Makefile.inc +++ /dev/null @@ -1,26 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/olivehillplus/PlatformGnbPcie.c b/src/mainboard/amd/olivehillplus/PlatformGnbPcie.c deleted file mode 100644 index 71a5e6c..0000000 --- a/src/mainboard/amd/olivehillplus/PlatformGnbPcie.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "PlatformGnbPcieComplex.h" - -#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE - -const PCIe_PORT_DESCRIPTOR PortList [] = { - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x01, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - } -}; - -const PCIe_DDI_DESCRIPTOR DdiList [] = { - /* DP0 to HDMI0/DP */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - }, - /* DP1 to FCH */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - }, - /* DP2 to HDMI1/DP */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) - }, -}; - -const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - InitEarly->GnbConfig.PcieComplexList = &PcieComplex; -} diff --git a/src/mainboard/amd/olivehillplus/PlatformGnbPcieComplex.h b/src/mainboard/amd/olivehillplus/PlatformGnbPcieComplex.h deleted file mode 100644 index cf3beb9..0000000 --- a/src/mainboard/amd/olivehillplus/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include <Porting.h> -#include <AGESA.h> - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/olivehillplus/acpi/AmdImc.asl b/src/mainboard/amd/olivehillplus/acpi/AmdImc.asl deleted file mode 100644 index 8ff4b1c..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/AmdImc.asl +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -OperationRegion(IMIO, SystemIO, 0x3E, 0x02) -Field(IMIO , ByteAcc, NoLock, Preserve) { - IMCX,8, - IMCA,8 -} - -IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { - Offset(0x80), - MSTI, 8, - MITS, 8, - MRG0, 8, - MRG1, 8, - MRG2, 8, - MRG3, 8, -} - -Method(WACK, 0) -{ - Store(0, Local0) - While (LNotEqual(Local0, 0xFA)) { - Store(MRG0, Local0) - Sleep(10) - } -} - -//Init -Method (ITZE, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} - -//Sleep -Method (IMSP, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(1, MRG1) - Store(0, MRG2) - Store(0x98, MSTI) - WACK() - - Store(0, MRG0) - Store(0xB4, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() -} - -//Wake -Method (IMWK, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} diff --git a/src/mainboard/amd/olivehillplus/acpi/gpe.asl b/src/mainboard/amd/olivehillplus/acpi/gpe.asl deleted file mode 100644 index 8d4f8a2..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/gpe.asl +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/amd/olivehillplus/acpi/ide.asl b/src/mainboard/amd/olivehillplus/acpi/ide.asl deleted file mode 100644 index 95d1db4..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/ide.asl +++ /dev/null @@ -1 +0,0 @@ -/* No IDE functionality */ diff --git a/src/mainboard/amd/olivehillplus/acpi/mainboard.asl b/src/mainboard/amd/olivehillplus/acpi/mainboard.asl deleted file mode 100644 index 05523fb..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/mainboard.asl +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -/* AcpiGpe0Blk */ -OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} diff --git a/src/mainboard/amd/olivehillplus/acpi/routing.asl b/src/mainboard/amd/olivehillplus/acpi/routing.asl deleted file mode 100644 index 91849ed..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/routing.asl +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 44 }, - Package(){0x0001FFFF, 1, 0, 45 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 18 }, - Package(){0x0002FFFF, 1, 0, 19 }, - Package(){0x0002FFFF, 2, 0, 16 }, - Package(){0x0002FFFF, 3, 0, 17 }, - - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) diff --git a/src/mainboard/amd/olivehillplus/acpi/sata.asl b/src/mainboard/amd/olivehillplus/acpi/sata.asl deleted file mode 100644 index f675323..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/sata.asl +++ /dev/null @@ -1 +0,0 @@ -/* No SATA functionality */ diff --git a/src/mainboard/amd/olivehillplus/acpi/si.asl b/src/mainboard/amd/olivehillplus/acpi/si.asl deleted file mode 100644 index 3cc2170..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/si.asl +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/amd/olivehillplus/acpi/sleep.asl b/src/mainboard/amd/olivehillplus/acpi/sleep.asl deleted file mode 100644 index aa22879..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/sleep.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -*s Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ - -External(_SB.APTS, MethodObj) -External(_SB.AWAK, MethodObj) - -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) - _SB.APTS(Arg0) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - Store(1,USBS) - - _SB.AWAK(Arg0) - - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/olivehillplus/acpi/superio.asl b/src/mainboard/amd/olivehillplus/acpi/superio.asl deleted file mode 100644 index 69c6108..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/amd/olivehillplus/acpi/thermal.asl b/src/mainboard/amd/olivehillplus/acpi/thermal.asl deleted file mode 100644 index edb1daf..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/thermal.asl +++ /dev/null @@ -1 +0,0 @@ -/* No thermal zone functionality */ diff --git a/src/mainboard/amd/olivehillplus/acpi/usb_oc.asl b/src/mainboard/amd/olivehillplus/acpi/usb_oc.asl deleted file mode 100644 index 8dae1df..0000000 --- a/src/mainboard/amd/olivehillplus/acpi/usb_oc.asl +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - diff --git a/src/mainboard/amd/olivehillplus/acpi_tables.c b/src/mainboard/amd/olivehillplus/acpi_tables.c deleted file mode 100644 index e066f15..0000000 --- a/src/mainboard/amd/olivehillplus/acpi_tables.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam16.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - 0xFEC20000, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *alib; - acpi_header_t *ivrs; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; /* it will used by fadt */ - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ /* it needs 64 bit alignment */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; /* it will be used by fadt */ - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); - ivrs = agesawrapper_getlateinitptr(PICK_IVRS); - if (ivrs != NULL) { - memcpy((void *)current, ivrs, ivrs->length); - ivrs = (acpi_header_t *) current; - current += ivrs->length; - acpi_add_table(rsdp, ivrs); - } else { - printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); - } - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* ALIB */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } - else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - } - else { - printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); - } - acpi_add_table(rsdp,ssdt); - - printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/amd/olivehillplus/agesawrapper.c b/src/mainboard/amd/olivehillplus/agesawrapper.c deleted file mode 100644 index 45670bd..0000000 --- a/src/mainboard/amd/olivehillplus/agesawrapper.c +++ /dev/null @@ -1,658 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <config.h> -#include <cpu/x86/mtrr.h> -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "cpuRegisters.h" -#include "cpuCacheInit.h" -#include "cpuApicUtilities.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "Dispatcher.h" -#include "cpuCacheInit.h" -#include "amdlib.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "Fch.h" -#include <cpu/amd/agesa/s3_resume.h> -#include <arch/io.h> -#include <device/device.h> -#include "hudson.h" - -VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr); -VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr); - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#ifndef __PRE_RAM__ -/* ACPI table pointers returned by AmdInitLate */ -static void *DmiTable = NULL; -static void *AcpiPstate = NULL; -static void *AcpiSrat = NULL; -static void *AcpiSlit = NULL; - -static void *AcpiWheaMce = NULL; -static void *AcpiWheaCmc = NULL; -static void *AcpiAlib = NULL; -static void *AcpiIvrs = NULL; -#endif - -AGESA_STATUS agesawrapper_amdinitcpuio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; /* last address before non-posted range */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* For serial port */ - PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* PSP */ - //PciData = 0xD; - //PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x8, 0x0, 0x48); - //LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Set ROM cache onto WP to decrease post time */ - MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - LibAmdMemFill (&AmdResetParams, - 0, - sizeof (AMD_RESET_PARAMS), - &(AmdResetParams.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResetParams.FchInterface.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - AmdResetParams.FchInterface.Xhci1Enable = FALSE; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - //PspBarInitEarly (); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_POST_PARAMS *PostParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; - - // Do not use IS_ENABLED here. CONFIG_GFXUMA should always have a value. Allow - // the compiler to flag the error if CONFIG_GFXUMA is not set. - PostParams->MemConfig.UmaMode = CONFIG_GFXUMA ? UMA_AUTO : UMA_NONE; - PostParams->MemConfig.UmaSize = 0; - status = AmdInitPost (PostParams); - printk( - BIOS_SPEW, - "setup_uma_memory: syslimit 0x%08llX, bottomio 0x%08lx\n", - (unsigned long long)(PostParams->MemConfig.SysLimit) << 16, - (unsigned long)(PostParams->MemConfig.BottomIo) << 16 - ); - printk( - BIOS_SPEW, - "setup_uma_memory: uma size %luMB, uma start 0x%08lx\n", - (unsigned long)(PostParams->MemConfig.UmaSize) >> (20 - 16), - (unsigned long)(PostParams->MemConfig.UmaBase) << 16 - ); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_ENV_PARAMS *EnvParam; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - status = AmdCreateStruct (&AmdParamStruct); - EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; - - status = AmdInitEnv (EnvParam); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - - return status; -} - -#ifndef __PRE_RAM__ -VOID* agesawrapper_getlateinitptr (int pick) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - case PICK_IVRS: - return AcpiIvrs; - default: - return NULL; - } -} -#endif - -AGESA_STATUS agesawrapper_amdinitmid(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_amdinitlate(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS *AmdLateParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ - AmdCreateStruct(&AmdParamStruct); - AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; - Status = AmdInitLate(AmdLateParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParams->DmiTable; - AcpiPstate = AmdLateParams->AcpiPState; - AcpiSrat = AmdLateParams->AcpiSrat; - AcpiSlit = AmdLateParams->AcpiSlit; - - AcpiWheaMce = AmdLateParams->AcpiWheaMce; - AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; - AcpiAlib = AmdLateParams->AcpiAlib; - AcpiIvrs = AmdLateParams->AcpiIvrs; - - printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," - "AcpiSlit:%x, Mce:%x, Cmc:%x," - "Alib:%x, AcpiIvrs:%x in %s\n", - (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, - (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, - (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); - - /* AmdReleaseStruct (&AmdParamStruct); */ - return Status; -} -#endif - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - LibAmdMemFill (&ApExeParams, - 0, - sizeof (AP_EXE_PARAMS), - &(ApExeParams.StdHeader)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - /* agesawrapper_amdreadeventlog(); */ - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#if CONFIG_HAVE_ACPI_RESUME - -AGESA_STATUS agesawrapper_amdinitresume(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_fchs3earlyrestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - - FchInitS3EarlyRestore(&FchParams); - - return status; -} -#endif - -AGESA_STATUS agesawrapper_amds3laterestore(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - agesawrapper_amdinitcpuio(); - LibAmdMemFill (&AmdS3LateParams, - 0, - sizeof (AMD_S3LATE_PARAMS), - &(AmdS3LateParams.StdHeader)); - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ - -extern UINT8 picr_data[0x54], intr_data[0x54]; - -AGESA_STATUS agesawrapper_fchs3laterestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - UINT8 byte; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - FchInitS3LateRestore(&FchParams); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - return status; -} -#endif - -#ifndef __PRE_RAM__ - -AGESA_STATUS agesawrapper_amdS3Save(void) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdInterfaceParams, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdInterfaceParams.StdHeader)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - - AmdCreateStruct(&AmdInterfaceParams); - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save(AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - -// Status = OemAgesaSaveS3Info ( -// S3DataType, -// AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, -// AmdS3SaveParamsPtr->S3DataBlock.NvStorage); -// PspMboxBiosCmdS3Info (AmdS3SaveParamsPtr->S3DataBlock.NvStorage, AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize); - - printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - } - OemAgesaSaveMtrr(); - - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} - -#endif /* #ifndef __PRE_RAM__ */ -#endif /* CONFIG_HAVE_ACPI_RESUME */ - -AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - LibAmdMemFill (&AmdEventParams, - 0, - sizeof (EVENT_PARAMS), - &(AmdEventParams.StdHeader)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - AmdEventParams.StdHeader.HeapStatus = HeapStatus; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/amd/olivehillplus/agesawrapper.h b/src/mainboard/amd/olivehillplus/agesawrapper.h deleted file mode 100644 index 6d2e802..0000000 --- a/src/mainboard/amd/olivehillplus/agesawrapper.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD APU and SoC SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ - PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); -AGESA_STATUS agesawrapper_amdreadeventlog(UINT8 HeapStatus); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitcpuio(void); -void *agesawrapper_getlateinitptr(int pick); -AGESA_STATUS agesawrapper_amdlaterunaptask(UINT32 Func, UINT32 Data, void *ConfigPtr); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); - -AGESA_STATUS agesawrapper_fchs3earlyrestore(void); -AGESA_STATUS agesawrapper_fchs3laterestore(void); - -#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/olivehillplus/board_info.txt b/src/mainboard/amd/olivehillplus/board_info.txt deleted file mode 100644 index d2c6670..0000000 --- a/src/mainboard/amd/olivehillplus/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: DB-FT3b (Olive Hill+) -Board URL: http://wwwd.amd.com/amd/devsite.nsf/platforms/DB-FT3.htm -Category: eval -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/amd/olivehillplus/cmos.layout b/src/mainboard/amd/olivehillplus/cmos.layout deleted file mode 100644 index 5520564..0000000 --- a/src/mainboard/amd/olivehillplus/cmos.layout +++ /dev/null @@ -1,114 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/olivehillplus/devicetree.cb b/src/mainboard/amd/olivehillplus/devicetree.cb deleted file mode 100644 index a00e2ba..0000000 --- a/src/mainboard/amd/olivehillplus/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2013 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/00730F01/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/00730F01 - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/00730F01 # CPU side of HT root complex - - chip northbridge/amd/agesa/00730F01 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - end #chip northbridge/amd/agesa/00730F01 - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/hudson - - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - register "spdAddrLookup" = " - { - { {0xA0, 0xA2} }, // socket 0, channel 0, slots 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/00730F01 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/00730F01/root_complex diff --git a/src/mainboard/amd/olivehillplus/dsdt.asl b/src/mainboard/amd/olivehillplus/dsdt.asl deleted file mode 100644 index 15bcd3d..0000000 --- a/src/mainboard/amd/olivehillplus/dsdt.asl +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> - - /* Describe the processor tree (_PR) */ - #include <cpu/amd/agesa/00730F01/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/00730F01/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> - - } /* End _SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/amd/olivehillplus/irq_tables.c b/src/mainboard/amd/olivehillplus/irq_tables.c deleted file mode 100644 index 22ed1ab..0000000 --- a/src/mainboard/amd/olivehillplus/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam16.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/amd/olivehillplus/mainboard.c b/src/mainboard/amd/olivehillplus/mainboard.c deleted file mode 100644 index 6073fd4..0000000 --- a/src/mainboard/amd/olivehillplus/mainboard.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <arch/acpi.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <cpu/amd/agesa/s3_resume.h> -#include "agesawrapper.h" -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> - -/********************************************** - * enable the dedicated function in mainboard. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - if (acpi_is_wakeup_s3()) - agesawrapper_fchs3earlyrestore(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/olivehillplus/mptable.c b/src/mainboard/amd/olivehillplus/mptable.c deleted file mode 100644 index 73660e4..0000000 --- a/src/mainboard/amd/olivehillplus/mptable.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam15.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/agesa/hudson/hudson.h> /* pm_ioread() */ - -u8 picr_data[0x54] = { - 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x03,0x04,0x05,0x07 -}; -u8 intr_data[0x54] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 byte; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - //mptable_write_buses(mc, NULL, &bus_isa); - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/olivehillplus/romstage.c b/src/mainboard/amd/olivehillplus/romstage.c deleted file mode 100644 index 6f300ce..0000000 --- a/src/mainboard/amd/olivehillplus/romstage.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/lapic.h" -#include "southbridge/amd/agesa/hudson/hudson.h" -#include "cpu/amd/agesa/s3_resume.h" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - volatile int halt = 0; - - /* - * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". This following register setting has been - * replicated in every reference design since Parmer, so it is - * believed to be required even though it is not documented in - * the SoC BKDGs. Without this setting, there is no serial - * output. - */ - outb(0xD2, 0xcd6); - outb(0x00, 0xcd7); - - AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); - - hudson_lpc_port80(); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - - post_code(0x31); - console_init(); - } - - if(boot_cpu()) { - while(halt); - } - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); - - /* - * This refers to LpcClkDrvSth settling time. Without this setting, processor - * initialization is slow or incorrect, so this wait has been replicated from - * earlier development boards. - */ - { - int i; - for(i = 0; i < 200000; i++) inb(0xCD6); - } - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x38); - printk(BIOS_DEBUG, "Got past avalon_early_setup\n"); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - AGESAWRAPPER(amdinitpost); - - //PspMboxBiosCmdDramInfo(); - post_code(0x41); - AGESAWRAPPER(amdinitenv); - /* - If code hangs here, please check cahaltasm.S - */ - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/amd/samba/board_info.txt b/src/mainboard/amd/samba/board_info.txt index d608aba..709be49 100644 --- a/src/mainboard/amd/samba/board_info.txt +++ b/src/mainboard/amd/samba/board_info.txt @@ -5,4 +5,4 @@ ROM package: SOIC8 ROM protocol: SPI ROM socketed: n Flashrom support: n -Clone of: lippert/hurricane-lx +Clone of: lippert/hurricane_lx diff --git a/src/mainboard/amd/south_station/BiosCallOuts.c b/src/mainboard/amd/south_station/BiosCallOuts.c deleted file mode 100644 index 693f159..0000000 --- a/src/mainboard/amd/south_station/BiosCallOuts.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "heapManager.h" -#include "SB800.h" -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include <stdlib.h> - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; - UINTN FcnData; - MEM_DATA_STRUCT *MemData; - UINT32 AcpiMmioAddr; - UINT32 GpioMmioAddr; - UINT8 Data8; - UINT16 Data16; - UINT8 TempData8; - - FcnData = Data; - MemData = ConfigPtr; - - Status = AGESA_SUCCESS; - /* Get SB MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8<<8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - - switch(MemData->ParameterListPtr->DDR3Voltage){ - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - } - return Status; -} - -/* PCIE slot reset control */ -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; - UINTN FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; - - UINT32 GpioMmioAddr; - UINT32 AcpiMmioAddr; - UINT8 Data8; - UINT16 Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16=Data8<<8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16|=Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 4: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - } - break; - case 6: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - } - break; - case 7: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; -} diff --git a/src/mainboard/amd/south_station/Kconfig b/src/mainboard/amd/south_station/Kconfig deleted file mode 100644 index 813dcfc..0000000 --- a/src/mainboard/amd/south_station/Kconfig +++ /dev/null @@ -1,92 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_AMD_SOUTHSTATION - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_FINTEK_F81865F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - select UDELAY_LAPIC - -config MAINBOARD_DIR - string - default amd/south_station - -config MAINBOARD_PART_NUMBER - string - default "Southstation" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n -config VGA_BIOS_FILE - string - default "site-local/vgabios.bin" - -config VGA_BIOS_ID - string - default "1002,9806" - -config DRIVERS_PS2_KEYBOARD - bool - default n - -endif # BOARD_AMD_SOUTHSTATION - diff --git a/src/mainboard/amd/south_station/Makefile.inc b/src/mainboard/amd/south_station/Makefile.inc deleted file mode 100644 index de376ba..0000000 --- a/src/mainboard/amd/south_station/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/south_station/OptionsIds.h b/src/mainboard/amd/south_station/OptionsIds.h deleted file mode 100644 index cf0a4be..0000000 --- a/src/mainboard/amd/south_station/OptionsIds.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/amd/south_station/PlatformGnbPcie.c b/src/mainboard/amd/south_station/PlatformGnbPcie.c deleted file mode 100644 index 3798251..0000000 --- a/src/mainboard/amd/south_station/PlatformGnbPcie.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "PlatformGnbPcieComplex.h" - -#include <string.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> - -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - VOID *BrazosPcieComplexListPtr; - VOID *BrazosPciePortPtr; - VOID *BrazosPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - -PCIe_PORT_DESCRIPTOR PortList [] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4) - }, - #if 1 - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7) - }, - #endif - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } -}; - -PCIe_DDI_DESCRIPTOR DdiList [] = { - /* Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) DP1 HDMI */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) - }, - /* Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) DP0 VGA */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux1, Hdp1) - } -}; - -PCIe_COMPLEX_DESCRIPTOR Brazos = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - - // GNB PCIe topology Porting - - // - // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - // - AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); - return; - } - - BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Brazos); - BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); - memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); - memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); - - - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; -} diff --git a/src/mainboard/amd/south_station/PlatformGnbPcieComplex.h b/src/mainboard/amd/south_station/PlatformGnbPcieComplex.h deleted file mode 100644 index 5efcd7d..0000000 --- a/src/mainboard/amd/south_station/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" - -//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/south_station/acpi/gpe.asl b/src/mainboard/amd/south_station/acpi/gpe.asl deleted file mode 100644 index bb47ded..0000000 --- a/src/mainboard/amd/south_station/acpi/gpe.asl +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ - -/* Contains the GPEs for USB overcurrent */ -#include "usb_oc.asl" diff --git a/src/mainboard/amd/south_station/acpi/ide.asl b/src/mainboard/amd/south_station/acpi/ide.asl deleted file mode 100644 index 4071f85..0000000 --- a/src/mainboard/amd/south_station/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0, Serialized) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, Serialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/south_station/acpi/mainboard.asl b/src/mainboard/amd/south_station/acpi/mainboard.asl deleted file mode 100644 index 1f532cf..0000000 --- a/src/mainboard/amd/south_station/acpi/mainboard.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Data to be patched by the BIOS during POST */ -/* FIXME the patching is not done yet! */ -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -Scope(_SB) { - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } -} - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/amd/south_station/acpi/routing.asl b/src/mainboard/amd/south_station/acpi/routing.asl deleted file mode 100644 index 98ad439..0000000 --- a/src/mainboard/amd/south_station/acpi/routing.asl +++ /dev/null @@ -1,407 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/south_station/acpi/sata.asl b/src/mainboard/amd/south_station/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/amd/south_station/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/south_station/acpi/sleep.asl b/src/mainboard/amd/south_station/acpi/sleep.asl deleted file mode 100644 index 5d0f8f0..0000000 --- a/src/mainboard/amd/south_station/acpi/sleep.asl +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/south_station/acpi/superio.asl b/src/mainboard/amd/south_station/acpi/superio.asl deleted file mode 100644 index 7d8d9df..0000000 --- a/src/mainboard/amd/south_station/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No SuperIO device or functionality yet */ diff --git a/src/mainboard/amd/south_station/acpi/thermal.asl b/src/mainboard/amd/south_station/acpi/thermal.asl deleted file mode 100644 index c9bccb1..0000000 --- a/src/mainboard/amd/south_station/acpi/thermal.asl +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#if 0 -/* THERMAL */ -Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ -} -#endif diff --git a/src/mainboard/amd/south_station/acpi/usb_oc.asl b/src/mainboard/amd/south_station/acpi/usb_oc.asl deleted file mode 100644 index ee00fbd..0000000 --- a/src/mainboard/amd/south_station/acpi/usb_oc.asl +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/south_station/acpi_tables.c b/src/mainboard/amd/south_station/acpi_tables.c deleted file mode 100644 index 588345e..0000000 --- a/src/mainboard/amd/south_station/acpi_tables.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include "agesawrapper.h" -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam14.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *alib; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } - else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } - else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* The DSDT needs additional work for the AGESA SSDT Pstate table */ - /* Keep the comment for a while. */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - } else { - printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); - } - - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); - ssdt2 = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); - current += ssdt2->length; - acpi_add_table(rsdp,ssdt2); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/amd/south_station/agesawrapper.c b/src/mainboard/amd/south_station/agesawrapper.c deleted file mode 100644 index 2c7549b..0000000 --- a/src/mainboard/amd/south_station/agesawrapper.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "cpuRegisters.h" -#include "cpuCacheInit.h" -#include "cpuApicUtilities.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "Dispatcher.h" -#include "cpuCacheInit.h" -#include "amdlib.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" -#include <arch/io.h> - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#define MMCONF_ENABLE 1 - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - -AGESA_STATUS agesawrapper_amdinitcpuio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 - PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - UINT8 BusRangeVal = 0; - UINT8 BusNum; - UINT8 Index; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - - for (Index = 0; Index < 8; Index++) { - BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; - if (BusNum == 1) { - BusRangeVal = Index; - break; - } - } - - MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000ull; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set Ontario Link Data */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); - PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); - PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = NULL; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - return status; - } - -AGESA_STATUS agesawrapper_amdinitearly ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - PCI_ADDR PciAddress; - UINT32 PciValue; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - /* Write to D1F0x18 */ - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x00010100; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Legacy Bridge Mode - * Modify B1D5F0x18 - */ - PciAddress.Address.Bus = 1; - PciAddress.Address.Device = 5; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Legacy Bridge Mode - * Modify B1D5F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Pcie Mode - * Modify B0D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Pcie Mode - * Modify B0D1F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Base and Limit Address - * Modify B0D1F0x20 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x20; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96009600; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Prefetchable Memory Limit and Base - * Modify B0D1F0x24 - */ - PciAddress.Address.Register = 0x24; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x8FF18001; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS * AmdLateParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; - - printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); - - Status = AmdInitLate (AmdLateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParamsPtr->DmiTable; - AcpiPstate = AmdLateParamsPtr->AcpiPState; - AcpiSrat = AmdLateParamsPtr->AcpiSrat; - AcpiSlit = AmdLateParamsPtr->AcpiSlit; - - AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; - AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; - AcpiAlib = AmdLateParamsPtr->AcpiAlib; - - /* Don't release the structure until coreboot has copied the ACPI tables. - * AmdReleaseStruct (&AmdLateParams); - */ - - return Status; -} - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -AGESA_STATUS agesawrapper_amdreadeventlog ( - VOID - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = NULL; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/amd/south_station/agesawrapper.h b/src/mainboard/amd/south_station/agesawrapper.h deleted file mode 100644 index 65c14e9..0000000 --- a/src/mainboard/amd/south_station/agesawrapper.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); - -AGESA_STATUS agesawrapper_amdreadeventlog(void); - -AGESA_STATUS agesawrapper_amdinitcpuio(void); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -void *agesawrapper_getlateinitptr (int pick); - -static inline AGESA_STATUS agesawrapper_amdS3Save(void) { return 0; } -#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/south_station/board_info.txt b/src/mainboard/amd/south_station/board_info.txt deleted file mode 100644 index 6391228..0000000 --- a/src/mainboard/amd/south_station/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: South Station -Category: eval -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/amd/south_station/buildOpts.c b/src/mainboard/amd/south_station/buildOpts.c deleted file mode 100644 index 9c7c219..0000000 --- a/src/mainboard/amd/south_station/buildOpts.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT TRUE -#define BLDOPT_REMOVE_SLIT TRUE -#define BLDOPT_REMOVE_WHEA TRUE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - -/* - * Agesa entry points used in this implementation. - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE FALSE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include "AGESA.h" -#include "CommonReturns.h" - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -//DA Customer table -CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); - -/* *************************************************************************** - * Optional User code to be included into the AGESA build - * These may be 32-bit call-out routines... - */ -//AGESA_STATUS -//AgesaReadSpd ( -// IN UINTN FcnData, -// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd -// ) -//{ -// /* platform code to read an SPD... */ -// return Status; -//} diff --git a/src/mainboard/amd/south_station/cmos.layout b/src/mainboard/amd/south_station/cmos.layout deleted file mode 100644 index ab65be0..0000000 --- a/src/mainboard/amd/south_station/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/south_station/devicetree.cb b/src/mainboard/amd/south_station/devicetree.cb deleted file mode 100644 index 60335d7..0000000 --- a/src/mainboard/amd/south_station/devicetree.cb +++ /dev/null @@ -1,112 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal HDMI Audio - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 on end # PCIE P2P bridge 0x9605 - device pci 6.0 on end # PCIE P2P bridge 0x9606 - device pci 7.0 on end # PCIE P2P bridge 0x9607 - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM -## chip drivers/generic/generic #dimm 0-0-0 -## device i2c 50 on end -## end -## chip drivers/generic/generic #dimm 0-0-1 -## device i2c 51 on end -## end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f81865f - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 off end # Hardware Monitor - device pnp 4e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.6 off end # GPIO - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - end # f81865f - end #LPC - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 15.0 off end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 off end # OHCI USB3 - device pci 16.2 off end # EHCI USB3 - register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family14/root_complex - diff --git a/src/mainboard/amd/south_station/dsdt.asl b/src/mainboard/amd/south_station/dsdt.asl deleted file mode 100644 index 25520b2..0000000 --- a/src/mainboard/amd/south_station/dsdt.asl +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - #include "acpi/mainboard.asl" - - #include <cpu/amd/agesa/family14/acpi/cpu.asl> - - #include "acpi/routing.asl" - - Scope(_SB) { - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - Device(PCI0) { - - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/cimx/sb800/acpi/fch.asl> - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - } - } /* End Scope(_SB) */ - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - #include "acpi/gpe.asl" - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - #include "acpi/thermal.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/amd/south_station/irq_tables.c b/src/mainboard/amd/south_station/irq_tables.c deleted file mode 100644 index 12a64a8..0000000 --- a/src/mainboard/amd/south_station/irq_tables.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam14.h> - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - - - slot_num++; - - - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/amd/south_station/mainboard.c b/src/mainboard/amd/south_station/mainboard.c deleted file mode 100644 index 43d6a78..0000000 --- a/src/mainboard/amd/south_station/mainboard.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <southbridge/amd/sb800/sb800.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <delay.h> -#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ - - -void set_pcie_reset(void); -void set_pcie_dereset(void); - -/** - * TODO - * SB CIMx callback - */ -void set_pcie_reset(void) -{ -} - -/** - * TODO - * mainboard specific SB CIMx callback - */ -void set_pcie_dereset(void) -{ -} - -/** - * Southstation using SB GPIO 17/18 to control the Red/Green LED - * These two LEDs can be used to show the OS booting status. - */ -static void southstation_led_init(void) -{ -#define GPIO_FUNCTION 2 //GPIO function -#define SB_GPIO_REG17 17 //Red Light -#define SB_GPIO_REG18 18 //Green Light - - /* multi-function pins switch to GPIO0-35 */ - RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1); - - /* select IOMux to function2, corresponds to GPIO */ - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG17, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); - RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG18, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); - - /* Lighting test */ - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x08); //output high - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x08); - mdelay(100); - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x48); //output low - RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x48); -} - - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - southstation_led_init(); - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_iowrite(0x29, 0x80); - pm_iowrite(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/south_station/mptable.c b/src/mainboard/amd/south_station/mptable.c deleted file mode 100644 index c2ec4a2..0000000 --- a/src/mainboard/amd/south_station/mptable.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam14.h> -#include <SBPLATFORM.h> - - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/south_station/platform_cfg.h b/src/mainboard/amd/south_station/platform_cfg.h deleted file mode 100644 index 4bd6a0e..0000000 --- a/src/mainboard/amd/south_station/platform_cfg.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -#endif diff --git a/src/mainboard/amd/south_station/romstage.c b/src/mainboard/amd/south_station/romstage.c deleted file mode 100644 index 98a042a..0000000 --- a/src/mainboard/amd/south_station/romstage.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <lib.h> -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include <cpu/x86/mtrr.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f81865f/f81865f.h> -#include "cpu/x86/lapic.h" -#include <sb_cimx.h> -#include "SBPLATFORM.h" - -#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* - * All cores: allow caching of flash chip code and data - * (there are no cache-as-ram reliability concerns with family 14h) - */ - __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); - __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); - - /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ - __writemsr (0xc0010062, 0); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - sb_Poweron_Init(); - - post_code(0x31); - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x35); - AGESAWRAPPER(amdinitmmio); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - - post_code(0x40); - AGESAWRAPPER(amdinitpost); - - post_code(0x41); - AGESAWRAPPER(amdinitenv); - - post_code(0x50); - copy_and_run(); - printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/amd/southstation/BiosCallOuts.c b/src/mainboard/amd/southstation/BiosCallOuts.c new file mode 100644 index 0000000..693f159 --- /dev/null +++ b/src/mainboard/amd/southstation/BiosCallOuts.c @@ -0,0 +1,210 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "heapManager.h" +#include "SB800.h" +#include <southbridge/amd/cimx/sb800/gpio_oem.h> +#include <stdlib.h> + +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT16 Data16; + UINT8 TempData8; + + FcnData = Data; + MemData = ConfigPtr; + + Status = AGESA_SUCCESS; + /* Get SB MMIO Base (AcpiMmioAddr) */ + WriteIo8 (0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16 = Data8<<8; + WriteIo8 (0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16 |= Data8; + AcpiMmioAddr = (UINT32)Data16 << 16; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~BIT5; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~BIT5; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + + switch(MemData->ParameterListPtr->DDR3Voltage){ + case VOLT1_35: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + } + return Status; +} + +/* PCIE slot reset control */ +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINTN FcnData; + PCIe_SLOT_RESET_INFO *ResetInfo; + + UINT32 GpioMmioAddr; + UINT32 AcpiMmioAddr; + UINT8 Data8; + UINT16 Data16; + + FcnData = Data; + ResetInfo = ConfigPtr; + // Get SB800 MMIO Base (AcpiMmioAddr) + WriteIo8(0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16=Data8<<8; + WriteIo8(0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16|=Data8; + AcpiMmioAddr = (UINT32)Data16 << 16; + Status = AGESA_UNSUPPORTED; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + switch (ResetInfo->ResetId) + { + case 4: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 + Status = AGESA_SUCCESS; + break; + } + break; + case 6: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 + Status = AGESA_SUCCESS; + break; + } + break; + case 7: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 + Status = AGESA_SUCCESS; + break; + } + break; + } + return Status; +} diff --git a/src/mainboard/amd/southstation/Kconfig b/src/mainboard/amd/southstation/Kconfig new file mode 100644 index 0000000..5c5928f --- /dev/null +++ b/src/mainboard/amd/southstation/Kconfig @@ -0,0 +1,92 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_SOUTHSTATION + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_FINTEK_F81865F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + select UDELAY_LAPIC + +config MAINBOARD_DIR + string + default amd/southstation + +config MAINBOARD_PART_NUMBER + string + default "Southstation" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n +config VGA_BIOS_FILE + string + default "site-local/vgabios.bin" + +config VGA_BIOS_ID + string + default "1002,9806" + +config DRIVERS_PS2_KEYBOARD + bool + default n + +endif # BOARD_AMD_SOUTHSTATION + diff --git a/src/mainboard/amd/southstation/Makefile.inc b/src/mainboard/amd/southstation/Makefile.inc new file mode 100644 index 0000000..de376ba --- /dev/null +++ b/src/mainboard/amd/southstation/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/southstation/OptionsIds.h b/src/mainboard/amd/southstation/OptionsIds.h new file mode 100644 index 0000000..cf0a4be --- /dev/null +++ b/src/mainboard/amd/southstation/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/amd/southstation/PlatformGnbPcie.c b/src/mainboard/amd/southstation/PlatformGnbPcie.c new file mode 100644 index 0000000..3798251 --- /dev/null +++ b/src/mainboard/amd/southstation/PlatformGnbPcie.c @@ -0,0 +1,146 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "PlatformGnbPcieComplex.h" + +#include <string.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + VOID *BrazosPcieComplexListPtr; + VOID *BrazosPciePortPtr; + VOID *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +PCIe_PORT_DESCRIPTOR PortList [] = { + // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4) + }, + #if 1 + // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5) + }, + // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6) + }, + // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7) + }, + #endif + // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) + } +}; + +PCIe_DDI_DESCRIPTOR DdiList [] = { + /* Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) DP1 HDMI */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) + }, + /* Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) DP0 VGA */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux1, Hdp1) + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + ASSERT(FALSE); + return; + } + + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; +} diff --git a/src/mainboard/amd/southstation/PlatformGnbPcieComplex.h b/src/mainboard/amd/southstation/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..5efcd7d --- /dev/null +++ b/src/mainboard/amd/southstation/PlatformGnbPcieComplex.h @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +//GNB GPP Port4 +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port5 +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port6 +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port7 +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port8 +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/southstation/acpi/gpe.asl b/src/mainboard/amd/southstation/acpi/gpe.asl new file mode 100644 index 0000000..bb47ded --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/gpe.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ + +/* Contains the GPEs for USB overcurrent */ +#include "usb_oc.asl" diff --git a/src/mainboard/amd/southstation/acpi/ide.asl b/src/mainboard/amd/southstation/acpi/ide.asl new file mode 100644 index 0000000..4071f85 --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0, Serialized) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, Serialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/amd/southstation/acpi/mainboard.asl b/src/mainboard/amd/southstation/acpi/mainboard.asl new file mode 100644 index 0000000..1f532cf --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/mainboard.asl @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Data to be patched by the BIOS during POST */ +/* FIXME the patching is not done yet! */ +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +Scope(_SB) { + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } +} + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/amd/southstation/acpi/routing.asl b/src/mainboard/amd/southstation/acpi/routing.asl new file mode 100644 index 0000000..98ad439 --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/routing.asl @@ -0,0 +1,407 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + Package(){0x0009FFFF, 1, 0, 16 }, + Package(){0x0009FFFF, 2, 0, 17 }, + Package(){0x0009FFFF, 3, 0, 18 }, + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + Package(){0x000AFFFF, 1, 0, 16 }, + Package(){0x000AFFFF, 2, 0, 17 }, + Package(){0x000AFFFF, 3, 0, 18 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/amd/southstation/acpi/sata.asl b/src/mainboard/amd/southstation/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/amd/southstation/acpi/sleep.asl b/src/mainboard/amd/southstation/acpi/sleep.asl new file mode 100644 index 0000000..5d0f8f0 --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/sleep.asl @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/southstation/acpi/superio.asl b/src/mainboard/amd/southstation/acpi/superio.asl new file mode 100644 index 0000000..7d8d9df --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SuperIO device or functionality yet */ diff --git a/src/mainboard/amd/southstation/acpi/thermal.asl b/src/mainboard/amd/southstation/acpi/thermal.asl new file mode 100644 index 0000000..c9bccb1 --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/thermal.asl @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if 0 +/* THERMAL */ +Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ +} +#endif diff --git a/src/mainboard/amd/southstation/acpi/usb_oc.asl b/src/mainboard/amd/southstation/acpi/usb_oc.asl new file mode 100644 index 0000000..ee00fbd --- /dev/null +++ b/src/mainboard/amd/southstation/acpi/usb_oc.asl @@ -0,0 +1,174 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/amd/southstation/acpi_tables.c b/src/mainboard/amd/southstation/acpi_tables.c new file mode 100644 index 0000000..588345e --- /dev/null +++ b/src/mainboard/amd/southstation/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam14.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* The DSDT needs additional work for the AGESA SSDT Pstate table */ + /* Keep the comment for a while. */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + } else { + printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); + } + + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/amd/southstation/agesawrapper.c b/src/mainboard/amd/southstation/agesawrapper.c new file mode 100644 index 0000000..2c7549b --- /dev/null +++ b/src/mainboard/amd/southstation/agesawrapper.c @@ -0,0 +1,473 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include <arch/io.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#define MMCONF_ENABLE 1 + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; + +AGESA_STATUS agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 + PciData |= 1 << 7; // set NP (non-posted) bit + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; // last address before non-posted range + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + UINT8 BusRangeVal = 0; + UINT8 BusNum; + UINT8 Index; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + + for (Index = 0; Index < 8; Index++) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1) { + BusRangeVal = Index; + break; + } + } + + MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000ull; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set Ontario Link Data */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); + PciData = 0x01308002; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); + PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + return status; + } + +AGESA_STATUS agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + UINT32 PciValue; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + /* Write to D1F0x18 */ + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x00010100; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Legacy Bridge Mode + * Modify B1D5F0x18 + */ + PciAddress.Address.Bus = 1; + PciAddress.Address.Device = 5; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Legacy Bridge Mode + * Modify B1D5F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Pcie Mode + * Modify B0D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Pcie Mode + * Modify B0D1F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Base and Limit Address + * Modify B0D1F0x20 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x20; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96009600; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Prefetchable Memory Limit and Base + * Modify B0D1F0x24 + */ + PciAddress.Address.Register = 0x24; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x8FF18001; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS * AmdLateParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + Status = AmdInitLate (AmdLateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return Status; +} + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +AGESA_STATUS agesawrapper_amdreadeventlog ( + VOID + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/amd/southstation/agesawrapper.h b/src/mainboard/amd/southstation/agesawrapper.h new file mode 100644 index 0000000..65c14e9 --- /dev/null +++ b/src/mainboard/amd/southstation/agesawrapper.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); + +AGESA_STATUS agesawrapper_amdreadeventlog(void); + +AGESA_STATUS agesawrapper_amdinitcpuio(void); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +void *agesawrapper_getlateinitptr (int pick); + +static inline AGESA_STATUS agesawrapper_amdS3Save(void) { return 0; } +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/southstation/board_info.txt b/src/mainboard/amd/southstation/board_info.txt new file mode 100644 index 0000000..6391228 --- /dev/null +++ b/src/mainboard/amd/southstation/board_info.txt @@ -0,0 +1,6 @@ +Board name: South Station +Category: eval +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/amd/southstation/buildOpts.c b/src/mainboard/amd/southstation/buildOpts.c new file mode 100644 index 0000000..9c7c219 --- /dev/null +++ b/src/mainboard/amd/southstation/buildOpts.c @@ -0,0 +1,457 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT TRUE +#define BLDOPT_REMOVE_SLIT TRUE +#define BLDOPT_REMOVE_WHEA TRUE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * Agesa entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE FALSE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/* + * Agesa configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ +#include "AGESA.h" +#include "CommonReturns.h" + +/* The fixed MTRR values to be set after memory initialization. */ +CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/* Include the files that instantiate the configuration definitions. */ + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +// Instantiate all solution relevant data. +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//DA Customer table +CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/amd/southstation/cmos.layout b/src/mainboard/amd/southstation/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/amd/southstation/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/amd/southstation/devicetree.cb b/src/mainboard/amd/southstation/devicetree.cb new file mode 100644 index 0000000..60335d7 --- /dev/null +++ b/src/mainboard/amd/southstation/devicetree.cb @@ -0,0 +1,112 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal HDMI Audio + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 on end # PCIE P2P bridge 0x9605 + device pci 6.0 on end # PCIE P2P bridge 0x9606 + device pci 7.0 on end # PCIE P2P bridge 0x9607 + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM +## chip drivers/generic/generic #dimm 0-0-0 +## device i2c 50 on end +## end +## chip drivers/generic/generic #dimm 0-0-1 +## device i2c 51 on end +## end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81865f + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 off end # Hardware Monitor + device pnp 4e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.6 off end # GPIO + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end # f81865f + end #LPC + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 15.0 off end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 off end # OHCI USB3 + device pci 16.2 off end # EHCI USB3 + register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex + diff --git a/src/mainboard/amd/southstation/dsdt.asl b/src/mainboard/amd/southstation/dsdt.asl new file mode 100644 index 0000000..25520b2 --- /dev/null +++ b/src/mainboard/amd/southstation/dsdt.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + #include "acpi/mainboard.asl" + + #include <cpu/amd/agesa/family14/acpi/cpu.asl> + + #include "acpi/routing.asl" + + Scope(_SB) { + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + Device(PCI0) { + + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/cimx/sb800/acpi/fch.asl> + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + } + } /* End Scope(_SB) */ + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + #include "acpi/gpe.asl" + #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> + #include "acpi/thermal.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/amd/southstation/irq_tables.c b/src/mainboard/amd/southstation/irq_tables.c new file mode 100644 index 0000000..12a64a8 --- /dev/null +++ b/src/mainboard/amd/southstation/irq_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam14.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/amd/southstation/mainboard.c b/src/mainboard/amd/southstation/mainboard.c new file mode 100644 index 0000000..43d6a78 --- /dev/null +++ b/src/mainboard/amd/southstation/mainboard.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <southbridge/amd/sb800/sb800.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <delay.h> +#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ + + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + +/** + * Southstation using SB GPIO 17/18 to control the Red/Green LED + * These two LEDs can be used to show the OS booting status. + */ +static void southstation_led_init(void) +{ +#define GPIO_FUNCTION 2 //GPIO function +#define SB_GPIO_REG17 17 //Red Light +#define SB_GPIO_REG18 18 //Green Light + + /* multi-function pins switch to GPIO0-35 */ + RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1); + + /* select IOMux to function2, corresponds to GPIO */ + RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG17, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); + RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG18, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION); + + /* Lighting test */ + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x08); //output high + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x08); + mdelay(100); + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x48); //output low + RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x48); +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + southstation_led_init(); + + /* + * Initialize ASF registers to an arbitrary address because someone + * long ago set things up this way inside the SPD read code. The + * SPD read code has been made generic and moved out of the board + * directory, so the ASF init is being done here. + */ + pm_iowrite(0x29, 0x80); + pm_iowrite(0x28, 0x61); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/amd/southstation/mptable.c b/src/mainboard/amd/southstation/mptable.c new file mode 100644 index 0000000..c2ec4a2 --- /dev/null +++ b/src/mainboard/amd/southstation/mptable.c @@ -0,0 +1,153 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam14.h> +#include <SBPLATFORM.h> + + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + u8 byte; + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device*/ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + /* Southbridge HD Audio: */ + PCI_INT(0x0, 0x14, 0x2, 0x12); + + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/southstation/platform_cfg.h b/src/mainboard/amd/southstation/platform_cfg.h new file mode 100644 index 0000000..4bd6a0e --- /dev/null +++ b/src/mainboard/amd/southstation/platform_cfg.h @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +#endif diff --git a/src/mainboard/amd/southstation/romstage.c b/src/mainboard/amd/southstation/romstage.c new file mode 100644 index 0000000..98a042a --- /dev/null +++ b/src/mainboard/amd/southstation/romstage.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <lib.h> +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include <superio/fintek/common/fintek.h> +#include <superio/fintek/f81865f/f81865f.h> +#include "cpu/x86/lapic.h" +#include <sb_cimx.h> +#include "SBPLATFORM.h" + +#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ + __writemsr (0xc0010062, 0); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x35); + AGESAWRAPPER(amdinitmmio); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + + post_code(0x40); + AGESAWRAPPER(amdinitpost); + + post_code(0x41); + AGESAWRAPPER(amdinitenv); + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/amd/union_station/BiosCallOuts.c b/src/mainboard/amd/union_station/BiosCallOuts.c deleted file mode 100644 index 693f159..0000000 --- a/src/mainboard/amd/union_station/BiosCallOuts.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "heapManager.h" -#include "SB800.h" -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include <stdlib.h> - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; - UINTN FcnData; - MEM_DATA_STRUCT *MemData; - UINT32 AcpiMmioAddr; - UINT32 GpioMmioAddr; - UINT8 Data8; - UINT16 Data16; - UINT8 TempData8; - - FcnData = Data; - MemData = ConfigPtr; - - Status = AGESA_SUCCESS; - /* Get SB MMIO Base (AcpiMmioAddr) */ - WriteIo8 (0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16 = Data8<<8; - WriteIo8 (0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16 |= Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); - - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~BIT5; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x03; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - - Data8 |= BIT2+BIT3; - Data8 &= ~BIT4; - TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - TempData8 &= 0x23; - TempData8 |= Data8; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); - - switch(MemData->ParameterListPtr->DDR3Voltage){ - case VOLT1_35: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_25: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - break; - case VOLT1_5: - default: - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); - Data8 |= (UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); - Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); - Data8 &= ~(UINT8)BIT6; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); - } - return Status; -} - -/* PCIE slot reset control */ -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; - UINTN FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; - - UINT32 GpioMmioAddr; - UINT32 AcpiMmioAddr; - UINT8 Data8; - UINT16 Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - // Get SB800 MMIO Base (AcpiMmioAddr) - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16=Data8<<8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16|=Data8; - AcpiMmioAddr = (UINT32)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 4: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 - Status = AGESA_SUCCESS; - break; - } - break; - case 6: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 - Status = AGESA_SUCCESS; - break; - } - break; - case 7: - switch (ResetInfo->ResetControl) - { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 &= ~(UINT8)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; -} diff --git a/src/mainboard/amd/union_station/Kconfig b/src/mainboard/amd/union_station/Kconfig deleted file mode 100644 index 8955435..0000000 --- a/src/mainboard/amd/union_station/Kconfig +++ /dev/null @@ -1,91 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_AMD_UNIONSTATION - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - select GFXUMA - select UDELAY_LAPIC - -config MAINBOARD_DIR - string - default amd/union_station - -config MAINBOARD_PART_NUMBER - string - default "Unionstation" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n -config VGA_BIOS_FILE - string - default "site-local/vgabios.bin" - -config VGA_BIOS_ID - string - default "1002,9802" - -config DRIVERS_PS2_KEYBOARD - bool - default n - -endif # BOARD_AMD_UNIONSTATION - diff --git a/src/mainboard/amd/union_station/Makefile.inc b/src/mainboard/amd/union_station/Makefile.inc deleted file mode 100644 index de376ba..0000000 --- a/src/mainboard/amd/union_station/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/union_station/OptionsIds.h b/src/mainboard/amd/union_station/OptionsIds.h deleted file mode 100644 index cf0a4be..0000000 --- a/src/mainboard/amd/union_station/OptionsIds.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/amd/union_station/PlatformGnbPcie.c b/src/mainboard/amd/union_station/PlatformGnbPcie.c deleted file mode 100644 index aa0eedb..0000000 --- a/src/mainboard/amd/union_station/PlatformGnbPcie.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "heapManager.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" - -#include <string.h> - -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - VOID *BrazosPcieComplexListPtr; - VOID *BrazosPciePortPtr; - VOID *BrazosPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - -PCIe_PORT_DESCRIPTOR PortList [] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4) - }, - #if 1 - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7) - }, - #endif - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } -}; - -PCIe_DDI_DESCRIPTOR DdiList [] = { - // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) - { - 0, //Descriptor flags - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - {ConnectorTypeHDMI, Aux1, Hdp1} - }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - {ConnectorTypeHDMI, Aux2, Hdp2} - } -}; - -PCIe_COMPLEX_DESCRIPTOR Brazos = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - - // GNB PCIe topology Porting - - // - // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - // - AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); - return; - } - - BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Brazos); - BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); - memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); - memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); - - - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; -} diff --git a/src/mainboard/amd/union_station/PlatformGnbPcieComplex.h b/src/mainboard/amd/union_station/PlatformGnbPcieComplex.h deleted file mode 100644 index 5efcd7d..0000000 --- a/src/mainboard/amd/union_station/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" - -//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/union_station/acpi/gpe.asl b/src/mainboard/amd/union_station/acpi/gpe.asl deleted file mode 100644 index bb47ded..0000000 --- a/src/mainboard/amd/union_station/acpi/gpe.asl +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ - -/* Contains the GPEs for USB overcurrent */ -#include "usb_oc.asl" diff --git a/src/mainboard/amd/union_station/acpi/ide.asl b/src/mainboard/amd/union_station/acpi/ide.asl deleted file mode 100644 index 4071f85..0000000 --- a/src/mainboard/amd/union_station/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0, Serialized) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, Serialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/amd/union_station/acpi/mainboard.asl b/src/mainboard/amd/union_station/acpi/mainboard.asl deleted file mode 100644 index 1f532cf..0000000 --- a/src/mainboard/amd/union_station/acpi/mainboard.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Data to be patched by the BIOS during POST */ -/* FIXME the patching is not done yet! */ -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -Scope(_SB) { - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } -} - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/amd/union_station/acpi/routing.asl b/src/mainboard/amd/union_station/acpi/routing.asl deleted file mode 100644 index 98ad439..0000000 --- a/src/mainboard/amd/union_station/acpi/routing.asl +++ /dev/null @@ -1,407 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/amd/union_station/acpi/sata.asl b/src/mainboard/amd/union_station/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/amd/union_station/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/amd/union_station/acpi/sleep.asl b/src/mainboard/amd/union_station/acpi/sleep.asl deleted file mode 100644 index 5d0f8f0..0000000 --- a/src/mainboard/amd/union_station/acpi/sleep.asl +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/union_station/acpi/superio.asl b/src/mainboard/amd/union_station/acpi/superio.asl deleted file mode 100644 index 7d8d9df..0000000 --- a/src/mainboard/amd/union_station/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No SuperIO device or functionality yet */ diff --git a/src/mainboard/amd/union_station/acpi/thermal.asl b/src/mainboard/amd/union_station/acpi/thermal.asl deleted file mode 100644 index c9bccb1..0000000 --- a/src/mainboard/amd/union_station/acpi/thermal.asl +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#if 0 -/* THERMAL */ -Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ -} -#endif diff --git a/src/mainboard/amd/union_station/acpi/usb_oc.asl b/src/mainboard/amd/union_station/acpi/usb_oc.asl deleted file mode 100644 index ee00fbd..0000000 --- a/src/mainboard/amd/union_station/acpi/usb_oc.asl +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/amd/union_station/acpi_tables.c b/src/mainboard/amd/union_station/acpi_tables.c deleted file mode 100644 index 588345e..0000000 --- a/src/mainboard/amd/union_station/acpi_tables.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include "agesawrapper.h" -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam14.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *alib; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } - else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } - else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* The DSDT needs additional work for the AGESA SSDT Pstate table */ - /* Keep the comment for a while. */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - } else { - printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); - } - - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); - ssdt2 = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); - current += ssdt2->length; - acpi_add_table(rsdp,ssdt2); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/amd/union_station/agesawrapper.c b/src/mainboard/amd/union_station/agesawrapper.c deleted file mode 100644 index 2c7549b..0000000 --- a/src/mainboard/amd/union_station/agesawrapper.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "cpuRegisters.h" -#include "cpuCacheInit.h" -#include "cpuApicUtilities.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "Dispatcher.h" -#include "cpuCacheInit.h" -#include "amdlib.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" -#include <arch/io.h> - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#define MMCONF_ENABLE 1 - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - -AGESA_STATUS agesawrapper_amdinitcpuio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 - PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - UINT8 BusRangeVal = 0; - UINT8 BusNum; - UINT8 Index; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - - for (Index = 0; Index < 8; Index++) { - BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; - if (BusNum == 1) { - BusRangeVal = Index; - break; - } - } - - MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000ull; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set Ontario Link Data */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); - PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); - PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = NULL; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - return status; - } - -AGESA_STATUS agesawrapper_amdinitearly ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - PCI_ADDR PciAddress; - UINT32 PciValue; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - /* Write to D1F0x18 */ - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x00010100; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Legacy Bridge Mode - * Modify B1D5F0x18 - */ - PciAddress.Address.Bus = 1; - PciAddress.Address.Device = 5; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Legacy Bridge Mode - * Modify B1D5F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Pcie Mode - * Modify B0D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Pcie Mode - * Modify B0D1F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Base and Limit Address - * Modify B0D1F0x20 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x20; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96009600; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Prefetchable Memory Limit and Base - * Modify B0D1F0x24 - */ - PciAddress.Address.Register = 0x24; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x8FF18001; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS * AmdLateParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; - - printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); - - Status = AmdInitLate (AmdLateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParamsPtr->DmiTable; - AcpiPstate = AmdLateParamsPtr->AcpiPState; - AcpiSrat = AmdLateParamsPtr->AcpiSrat; - AcpiSlit = AmdLateParamsPtr->AcpiSlit; - - AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; - AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; - AcpiAlib = AmdLateParamsPtr->AcpiAlib; - - /* Don't release the structure until coreboot has copied the ACPI tables. - * AmdReleaseStruct (&AmdLateParams); - */ - - return Status; -} - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -AGESA_STATUS agesawrapper_amdreadeventlog ( - VOID - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = NULL; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/amd/union_station/agesawrapper.h b/src/mainboard/amd/union_station/agesawrapper.h deleted file mode 100644 index 65c14e9..0000000 --- a/src/mainboard/amd/union_station/agesawrapper.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); - -AGESA_STATUS agesawrapper_amdreadeventlog(void); - -AGESA_STATUS agesawrapper_amdinitcpuio(void); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -void *agesawrapper_getlateinitptr (int pick); - -static inline AGESA_STATUS agesawrapper_amdS3Save(void) { return 0; } -#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/union_station/board_info.txt b/src/mainboard/amd/union_station/board_info.txt deleted file mode 100644 index 23fc323..0000000 --- a/src/mainboard/amd/union_station/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: Union Station -Category: eval -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/amd/union_station/buildOpts.c b/src/mainboard/amd/union_station/buildOpts.c deleted file mode 100644 index 9c7c219..0000000 --- a/src/mainboard/amd/union_station/buildOpts.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT TRUE -#define BLDOPT_REMOVE_SLIT TRUE -#define BLDOPT_REMOVE_WHEA TRUE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - -/* - * Agesa entry points used in this implementation. - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE FALSE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include "AGESA.h" -#include "CommonReturns.h" - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -//DA Customer table -CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); - -/* *************************************************************************** - * Optional User code to be included into the AGESA build - * These may be 32-bit call-out routines... - */ -//AGESA_STATUS -//AgesaReadSpd ( -// IN UINTN FcnData, -// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd -// ) -//{ -// /* platform code to read an SPD... */ -// return Status; -//} diff --git a/src/mainboard/amd/union_station/cmos.layout b/src/mainboard/amd/union_station/cmos.layout deleted file mode 100644 index ab65be0..0000000 --- a/src/mainboard/amd/union_station/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/amd/union_station/devicetree.cb b/src/mainboard/amd/union_station/devicetree.cb deleted file mode 100644 index 2289126..0000000 --- a/src/mainboard/amd/union_station/devicetree.cb +++ /dev/null @@ -1,88 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal HDMI Audio - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 on end # PCIE P2P bridge 0x9605 - device pci 6.0 on end # PCIE P2P bridge 0x9606 - device pci 7.0 on end # PCIE P2P bridge 0x9607 - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM -## chip drivers/generic/generic #dimm 0-0-0 -## device i2c 50 on end -## end -## chip drivers/generic/generic #dimm 0-0-1 -## device i2c 51 on end -## end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - end #LPC - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 15.0 off end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 off end # OHCI USB3 - device pci 16.2 off end # EHCI USB3 - register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family14/root_complex - diff --git a/src/mainboard/amd/union_station/dsdt.asl b/src/mainboard/amd/union_station/dsdt.asl deleted file mode 100644 index 25520b2..0000000 --- a/src/mainboard/amd/union_station/dsdt.asl +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - #include "acpi/mainboard.asl" - - #include <cpu/amd/agesa/family14/acpi/cpu.asl> - - #include "acpi/routing.asl" - - Scope(_SB) { - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - Device(PCI0) { - - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/cimx/sb800/acpi/fch.asl> - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - } - } /* End Scope(_SB) */ - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - #include "acpi/gpe.asl" - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - #include "acpi/thermal.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/amd/union_station/irq_tables.c b/src/mainboard/amd/union_station/irq_tables.c deleted file mode 100644 index 12a64a8..0000000 --- a/src/mainboard/amd/union_station/irq_tables.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam14.h> - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - - - slot_num++; - - - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/amd/union_station/mainboard.c b/src/mainboard/amd/union_station/mainboard.c deleted file mode 100644 index 8816e8d..0000000 --- a/src/mainboard/amd/union_station/mainboard.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb800/sb800.h> -#include <cpu/amd/mtrr.h> -#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ - -void set_pcie_reset(void); -void set_pcie_dereset(void); - -/** - * TODO - * SB CIMx callback - */ -void set_pcie_reset(void) -{ -} - -/** - * TODO - * mainboard specific SB CIMx callback - */ -void set_pcie_dereset(void) -{ -} - - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_iowrite(0x29, 0x80); - pm_iowrite(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/amd/union_station/mptable.c b/src/mainboard/amd/union_station/mptable.c deleted file mode 100644 index c2ec4a2..0000000 --- a/src/mainboard/amd/union_station/mptable.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam14.h> -#include <SBPLATFORM.h> - - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/amd/union_station/platform_cfg.h b/src/mainboard/amd/union_station/platform_cfg.h deleted file mode 100644 index 4bd6a0e..0000000 --- a/src/mainboard/amd/union_station/platform_cfg.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -#endif diff --git a/src/mainboard/amd/union_station/romstage.c b/src/mainboard/amd/union_station/romstage.c deleted file mode 100644 index 168b57f..0000000 --- a/src/mainboard/amd/union_station/romstage.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <lib.h> -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include <cpu/x86/mtrr.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/lapic.h" -#include <sb_cimx.h> -#include "SBPLATFORM.h" - -#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* - * All cores: allow caching of flash chip code and data - * (there are no cache-as-ram reliability concerns with family 14h) - */ - __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); - __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - sb_Poweron_Init(); - - post_code(0x31); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x35); - AGESAWRAPPER(amdinitmmio); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - - post_code(0x40); - AGESAWRAPPER(amdinitpost); - - post_code(0x41); - AGESAWRAPPER(amdinitenv); - - post_code(0x50); - copy_and_run(); - printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/amd/unionstation/BiosCallOuts.c b/src/mainboard/amd/unionstation/BiosCallOuts.c new file mode 100644 index 0000000..693f159 --- /dev/null +++ b/src/mainboard/amd/unionstation/BiosCallOuts.c @@ -0,0 +1,210 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "heapManager.h" +#include "SB800.h" +#include <southbridge/amd/cimx/sb800/gpio_oem.h> +#include <stdlib.h> + +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINTN FcnData; + MEM_DATA_STRUCT *MemData; + UINT32 AcpiMmioAddr; + UINT32 GpioMmioAddr; + UINT8 Data8; + UINT16 Data16; + UINT8 TempData8; + + FcnData = Data; + MemData = ConfigPtr; + + Status = AGESA_SUCCESS; + /* Get SB MMIO Base (AcpiMmioAddr) */ + WriteIo8 (0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16 = Data8<<8; + WriteIo8 (0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16 |= Data8; + AcpiMmioAddr = (UINT32)Data16 << 16; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~BIT5; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8); + + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~BIT5; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x03; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + + Data8 |= BIT2+BIT3; + Data8 &= ~BIT4; + TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + TempData8 &= 0x23; + TempData8 |= Data8; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8); + + switch(MemData->ParameterListPtr->DDR3Voltage){ + case VOLT1_35: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_25: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + break; + case VOLT1_5: + default: + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178); + Data8 |= (UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8); + Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179); + Data8 &= ~(UINT8)BIT6; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8); + } + return Status; +} + +/* PCIE slot reset control */ +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + UINTN FcnData; + PCIe_SLOT_RESET_INFO *ResetInfo; + + UINT32 GpioMmioAddr; + UINT32 AcpiMmioAddr; + UINT8 Data8; + UINT16 Data16; + + FcnData = Data; + ResetInfo = ConfigPtr; + // Get SB800 MMIO Base (AcpiMmioAddr) + WriteIo8(0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16=Data8<<8; + WriteIo8(0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16|=Data8; + AcpiMmioAddr = (UINT32)Data16 << 16; + Status = AGESA_UNSUPPORTED; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + switch (ResetInfo->ResetId) + { + case 4: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21 + Status = AGESA_SUCCESS; + break; + } + break; + case 6: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25 + Status = AGESA_SUCCESS; + break; + } + break; + case 7: + switch (ResetInfo->ResetControl) + { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 &= ~(UINT8)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02 + Status = AGESA_SUCCESS; + break; + } + break; + } + return Status; +} diff --git a/src/mainboard/amd/unionstation/Kconfig b/src/mainboard/amd/unionstation/Kconfig new file mode 100644 index 0000000..9de3a2c --- /dev/null +++ b/src/mainboard/amd/unionstation/Kconfig @@ -0,0 +1,91 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_AMD_UNIONSTATION + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_2048 + select GFXUMA + select UDELAY_LAPIC + +config MAINBOARD_DIR + string + default amd/unionstation + +config MAINBOARD_PART_NUMBER + string + default "Unionstation" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n +config VGA_BIOS_FILE + string + default "site-local/vgabios.bin" + +config VGA_BIOS_ID + string + default "1002,9802" + +config DRIVERS_PS2_KEYBOARD + bool + default n + +endif # BOARD_AMD_UNIONSTATION + diff --git a/src/mainboard/amd/unionstation/Makefile.inc b/src/mainboard/amd/unionstation/Makefile.inc new file mode 100644 index 0000000..de376ba --- /dev/null +++ b/src/mainboard/amd/unionstation/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/amd/unionstation/OptionsIds.h b/src/mainboard/amd/unionstation/OptionsIds.h new file mode 100644 index 0000000..cf0a4be --- /dev/null +++ b/src/mainboard/amd/unionstation/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/amd/unionstation/PlatformGnbPcie.c b/src/mainboard/amd/unionstation/PlatformGnbPcie.c new file mode 100644 index 0000000..aa0eedb --- /dev/null +++ b/src/mainboard/amd/unionstation/PlatformGnbPcie.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#include <string.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + VOID *BrazosPcieComplexListPtr; + VOID *BrazosPciePortPtr; + VOID *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +PCIe_PORT_DESCRIPTOR PortList [] = { + // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4) + }, + #if 1 + // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5) + }, + // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6) + }, + // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7) + }, + #endif + // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) + } +}; + +PCIe_DDI_DESCRIPTOR DdiList [] = { + // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) + { + 0, //Descriptor flags + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + {ConnectorTypeHDMI, Aux1, Hdp1} + }, + // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + {ConnectorTypeHDMI, Aux2, Hdp2} + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + ASSERT(FALSE); + return; + } + + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; +} diff --git a/src/mainboard/amd/unionstation/PlatformGnbPcieComplex.h b/src/mainboard/amd/unionstation/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..5efcd7d --- /dev/null +++ b/src/mainboard/amd/unionstation/PlatformGnbPcieComplex.h @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +//GNB GPP Port4 +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port5 +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port6 +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port7 +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port8 +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/amd/unionstation/acpi/gpe.asl b/src/mainboard/amd/unionstation/acpi/gpe.asl new file mode 100644 index 0000000..bb47ded --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/gpe.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ + +/* Contains the GPEs for USB overcurrent */ +#include "usb_oc.asl" diff --git a/src/mainboard/amd/unionstation/acpi/ide.asl b/src/mainboard/amd/unionstation/acpi/ide.asl new file mode 100644 index 0000000..4071f85 --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0, Serialized) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, Serialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/amd/unionstation/acpi/mainboard.asl b/src/mainboard/amd/unionstation/acpi/mainboard.asl new file mode 100644 index 0000000..1f532cf --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/mainboard.asl @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Data to be patched by the BIOS during POST */ +/* FIXME the patching is not done yet! */ +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +Scope(_SB) { + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } +} + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/amd/unionstation/acpi/routing.asl b/src/mainboard/amd/unionstation/acpi/routing.asl new file mode 100644 index 0000000..98ad439 --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/routing.asl @@ -0,0 +1,407 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + Package(){0x0009FFFF, 1, 0, 16 }, + Package(){0x0009FFFF, 2, 0, 17 }, + Package(){0x0009FFFF, 3, 0, 18 }, + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + Package(){0x000AFFFF, 1, 0, 16 }, + Package(){0x000AFFFF, 2, 0, 17 }, + Package(){0x000AFFFF, 3, 0, 18 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/amd/unionstation/acpi/sata.asl b/src/mainboard/amd/unionstation/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/amd/unionstation/acpi/sleep.asl b/src/mainboard/amd/unionstation/acpi/sleep.asl new file mode 100644 index 0000000..5d0f8f0 --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/sleep.asl @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/amd/unionstation/acpi/superio.asl b/src/mainboard/amd/unionstation/acpi/superio.asl new file mode 100644 index 0000000..7d8d9df --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SuperIO device or functionality yet */ diff --git a/src/mainboard/amd/unionstation/acpi/thermal.asl b/src/mainboard/amd/unionstation/acpi/thermal.asl new file mode 100644 index 0000000..c9bccb1 --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/thermal.asl @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if 0 +/* THERMAL */ +Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ +} +#endif diff --git a/src/mainboard/amd/unionstation/acpi/usb_oc.asl b/src/mainboard/amd/unionstation/acpi/usb_oc.asl new file mode 100644 index 0000000..ee00fbd --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi/usb_oc.asl @@ -0,0 +1,174 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/amd/unionstation/acpi_tables.c b/src/mainboard/amd/unionstation/acpi_tables.c new file mode 100644 index 0000000..588345e --- /dev/null +++ b/src/mainboard/amd/unionstation/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam14.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* The DSDT needs additional work for the AGESA SSDT Pstate table */ + /* Keep the comment for a while. */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + } else { + printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); + } + + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/amd/unionstation/agesawrapper.c b/src/mainboard/amd/unionstation/agesawrapper.c new file mode 100644 index 0000000..2c7549b --- /dev/null +++ b/src/mainboard/amd/unionstation/agesawrapper.c @@ -0,0 +1,473 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include <arch/io.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#define MMCONF_ENABLE 1 + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; + +AGESA_STATUS agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 + PciData |= 1 << 7; // set NP (non-posted) bit + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; // last address before non-posted range + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + UINT8 BusRangeVal = 0; + UINT8 BusNum; + UINT8 Index; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + + for (Index = 0; Index < 8; Index++) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1) { + BusRangeVal = Index; + break; + } + } + + MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000ull; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set Ontario Link Data */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); + PciData = 0x01308002; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); + PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + return status; + } + +AGESA_STATUS agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + UINT32 PciValue; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + /* Write to D1F0x18 */ + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x00010100; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Legacy Bridge Mode + * Modify B1D5F0x18 + */ + PciAddress.Address.Bus = 1; + PciAddress.Address.Device = 5; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Legacy Bridge Mode + * Modify B1D5F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Pcie Mode + * Modify B0D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Pcie Mode + * Modify B0D1F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Base and Limit Address + * Modify B0D1F0x20 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x20; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96009600; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Prefetchable Memory Limit and Base + * Modify B0D1F0x24 + */ + PciAddress.Address.Register = 0x24; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x8FF18001; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS * AmdLateParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + Status = AmdInitLate (AmdLateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return Status; +} + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +AGESA_STATUS agesawrapper_amdreadeventlog ( + VOID + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/amd/unionstation/agesawrapper.h b/src/mainboard/amd/unionstation/agesawrapper.h new file mode 100644 index 0000000..65c14e9 --- /dev/null +++ b/src/mainboard/amd/unionstation/agesawrapper.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); + +AGESA_STATUS agesawrapper_amdreadeventlog(void); + +AGESA_STATUS agesawrapper_amdinitcpuio(void); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +void *agesawrapper_getlateinitptr (int pick); + +static inline AGESA_STATUS agesawrapper_amdS3Save(void) { return 0; } +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/amd/unionstation/board_info.txt b/src/mainboard/amd/unionstation/board_info.txt new file mode 100644 index 0000000..23fc323 --- /dev/null +++ b/src/mainboard/amd/unionstation/board_info.txt @@ -0,0 +1,6 @@ +Board name: Union Station +Category: eval +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/amd/unionstation/buildOpts.c b/src/mainboard/amd/unionstation/buildOpts.c new file mode 100644 index 0000000..9c7c219 --- /dev/null +++ b/src/mainboard/amd/unionstation/buildOpts.c @@ -0,0 +1,457 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT TRUE +#define BLDOPT_REMOVE_SLIT TRUE +#define BLDOPT_REMOVE_WHEA TRUE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * Agesa entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE FALSE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/* + * Agesa configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ +#include "AGESA.h" +#include "CommonReturns.h" + +/* The fixed MTRR values to be set after memory initialization. */ +CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/* Include the files that instantiate the configuration definitions. */ + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +// Instantiate all solution relevant data. +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//DA Customer table +CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/amd/unionstation/cmos.layout b/src/mainboard/amd/unionstation/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/amd/unionstation/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/amd/unionstation/devicetree.cb b/src/mainboard/amd/unionstation/devicetree.cb new file mode 100644 index 0000000..2289126 --- /dev/null +++ b/src/mainboard/amd/unionstation/devicetree.cb @@ -0,0 +1,88 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal HDMI Audio + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 on end # PCIE P2P bridge 0x9605 + device pci 6.0 on end # PCIE P2P bridge 0x9606 + device pci 7.0 on end # PCIE P2P bridge 0x9607 + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM +## chip drivers/generic/generic #dimm 0-0-0 +## device i2c 50 on end +## end +## chip drivers/generic/generic #dimm 0-0-1 +## device i2c 51 on end +## end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + end #LPC + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 15.0 off end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 off end # OHCI USB3 + device pci 16.2 off end # EHCI USB3 + register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex + diff --git a/src/mainboard/amd/unionstation/dsdt.asl b/src/mainboard/amd/unionstation/dsdt.asl new file mode 100644 index 0000000..25520b2 --- /dev/null +++ b/src/mainboard/amd/unionstation/dsdt.asl @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + #include "acpi/mainboard.asl" + + #include <cpu/amd/agesa/family14/acpi/cpu.asl> + + #include "acpi/routing.asl" + + Scope(_SB) { + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + Device(PCI0) { + + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/cimx/sb800/acpi/fch.asl> + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + } + } /* End Scope(_SB) */ + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + #include "acpi/gpe.asl" + #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> + #include "acpi/thermal.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/amd/unionstation/irq_tables.c b/src/mainboard/amd/unionstation/irq_tables.c new file mode 100644 index 0000000..12a64a8 --- /dev/null +++ b/src/mainboard/amd/unionstation/irq_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam14.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/amd/unionstation/mainboard.c b/src/mainboard/amd/unionstation/mainboard.c new file mode 100644 index 0000000..8816e8d --- /dev/null +++ b/src/mainboard/amd/unionstation/mainboard.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb800/sb800.h> +#include <cpu/amd/mtrr.h> +#include "SBPLATFORM.h" /* Platfrom Specific Definitions */ + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + /* + * Initialize ASF registers to an arbitrary address because someone + * long ago set things up this way inside the SPD read code. The + * SPD read code has been made generic and moved out of the board + * directory, so the ASF init is being done here. + */ + pm_iowrite(0x29, 0x80); + pm_iowrite(0x28, 0x61); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/amd/unionstation/mptable.c b/src/mainboard/amd/unionstation/mptable.c new file mode 100644 index 0000000..c2ec4a2 --- /dev/null +++ b/src/mainboard/amd/unionstation/mptable.c @@ -0,0 +1,153 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam14.h> +#include <SBPLATFORM.h> + + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + u8 byte; + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device*/ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + /* Southbridge HD Audio: */ + PCI_INT(0x0, 0x14, 0x2, 0x12); + + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/amd/unionstation/platform_cfg.h b/src/mainboard/amd/unionstation/platform_cfg.h new file mode 100644 index 0000000..4bd6a0e --- /dev/null +++ b/src/mainboard/amd/unionstation/platform_cfg.h @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +#endif diff --git a/src/mainboard/amd/unionstation/romstage.c b/src/mainboard/amd/unionstation/romstage.c new file mode 100644 index 0000000..168b57f --- /dev/null +++ b/src/mainboard/amd/unionstation/romstage.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <lib.h> +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include <sb_cimx.h> +#include "SBPLATFORM.h" + +#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x35); + AGESAWRAPPER(amdinitmmio); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + + post_code(0x40); + AGESAWRAPPER(amdinitpost); + + post_code(0x41); + AGESAWRAPPER(amdinitenv); + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/aopen/Kconfig b/src/mainboard/aopen/Kconfig index b0fc66b..c172dc9 100644 --- a/src/mainboard/aopen/Kconfig +++ b/src/mainboard/aopen/Kconfig @@ -3,12 +3,12 @@ if VENDOR_AOPEN choice prompt "Mainboard model"
-config BOARD_AOPEN_DXPLPLUSU +config BOARD_AOPEN_DXPL_PLUS_U bool "DXPL Plus-U"
endchoice
-source "src/mainboard/aopen/dxplplusu/Kconfig" +source "src/mainboard/aopen/dxpl_plus_u/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/aopen/dxpl_plus_u/Kconfig b/src/mainboard/aopen/dxpl_plus_u/Kconfig new file mode 100644 index 0000000..83b6c66 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/Kconfig @@ -0,0 +1,41 @@ +if BOARD_AOPEN_DXPL_PLUS_U + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_MPGA604 + select NORTHBRIDGE_INTEL_E7505 + select SOUTHBRIDGE_INTEL_I82870 + select SOUTHBRIDGE_INTEL_I82801DX + select SUPERIO_SMSC_LPC47M10X +# select HAVE_PIRQ_TABLE +# select PIRQ_ROUTE + select UDELAY_TSC + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select HW_SCRUBBER + +config MAINBOARD_DIR + string + default aopen/dxpl_plus_u + +config MAINBOARD_PART_NUMBER + string + default "DXPL Plus-U" + +config IRQ_SLOT_COUNT + int + default 12 + +config MAX_CPUS + int + default 4 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x0 + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x0 + +endif # BOARD_AOPEN_DXPL_PLUS_U diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_pri.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_pri.asl new file mode 100644 index 0000000..2818e4a --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_pri.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (MBRS) +{ + Name (_HID, EisaId ("PNP0C01")) + Name (_UID, 0x01) + Name (MSBF, ResourceTemplate () + { + /* System memory */ + QWordMemory (ResourceProducer, PosDecode, MinFixed, + MaxNotFixed, Prefetchable, ReadWrite, + 0x0, 0x100000000, 0x400000000, 0x0, 0x0, ,, _Y1C, + AddressRangeMemory, TypeStatic) + + /* Top Of Low Memory */ + Memory32 (ReadOnly, 0x0, 0x0, 0x1, 0x0, _Y1D) + + /* 640kB who wants more? */ + Memory32Fixed (ReadWrite, 0x0, 0xA0000, ) + + /* 64k BIOS bootblock */ + Memory32Fixed (ReadOnly, 0xF0000, 0x10000,) + + /* ISA memory hole 15-16 MB ? */ + /* Memory32Fixed (ReadOnly, 0x100000, 0xF00000,) */ + /* ISA memory hole 14-15 MB ? */ + /* Memory32Fixed (ReadOnly, 0x100000, 0xE00000,) */ + + /* Local APIC */ + Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000,) + }) + + Method (_CRS, 0, NotSerialized) + { + CreateQWordField (MSBF, _SB.MBRS._Y1C._MIN, MEML) + CreateQWordField (MSBF, _SB.MBRS._Y1C._MAX, MEMM) + CreateQWordField (MSBF, _SB.MBRS._Y1C._LEN, LELM) + + And (_SB.PCI0.RLAR, 0x03FF, Local1) + Increment (Local1) + If (LGreater (Local1, 0x40)) + { + ShiftLeft (Local1, 0x1A, LELM) + } + + + CreateDWordField (MSBF, _SB.MBRS._Y1D._MIN, MS00) + CreateDWordField (MSBF, _SB.MBRS._Y1D._MAX, MS01) + CreateDWordField (MSBF, _SB.MBRS._Y1D._LEN, MEM2) + And (_SB.PCI0.TOLM, 0xF800, Local1) + ShiftRight (Local1, 0x04, Local1) + Decrement (Local1) + If (LGreater (Local1, 0x10)) + { + Subtract (Local1, 0x0F, Local1) + Store (ShiftLeft (Local1, 0x14), MEM2) + Store (0x01000000, MS00) + Store (MS00, MS01) + } + + Return (MSBF) + } + + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_sec.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_sec.asl new file mode 100644 index 0000000..eb59dd7 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/e7505_sec.asl @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name (PBRS, ResourceTemplate () +{ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, 0x0000, 0x00FF, 0x0000, 0x0100, ,, ) + + /* System IO */ + DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0, 0x0, 0xffff, 0x0000, 0x10000, ,,, TypeStatic) + IO (Decode16, 0x0CF8, 0x0CF8, 0x08, 0x08, ) + + /* Video RAM */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000A0000, 0x000BFFFF, + 0x00000000, 0x00020000, ,,, AddressRangeMemory, TypeStatic) + + /* Video ROM */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000C0000, 0x000C7FFF, + 0x00000000, 0x00008000, ,,, AddressRangeMemory, TypeStatic) + + /* Option ROMs ? */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x000C8000, 0x000DFFFF, + 0x00000000, 0x00018000, ,,, AddressRangeMemory, TypeStatic) + + /* Top Of Lowmemory to IOAPIC */ + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, 0x00000000, 0xFEBFFFFF, + 0x00000000, IO_APIC_ADDR, ,, _Y08, AddressRangeMemory, TypeStatic) +}) + + +Method (_CRS, 0, NotSerialized) +{ + + /* Top Of Lowmemory to IOAPIC */ + CreateDWordField (PBRS, _SB.PCI0._Y08._MIN, MEML) + CreateDWordField (PBRS, _SB.PCI0._Y08._MAX, MEMH) + CreateDWordField (PBRS, _SB.PCI0._Y08._LEN, LENM) + And (_SB.PCI0.TOLM, 0xF800, Local1) + ShiftRight (Local1, 0x04, Local1) + ShiftLeft (Local1, 0x14, MEML) + Subtract (IO_APIC_ADDR, 0x01, MEMH) + Subtract (IO_APIC_ADDR, MEML, LENM) + + Return (PBRS) +} + +Method (_STA, 0, NotSerialized) +{ + Return (0x0F) +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/i82801db.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/i82801db.asl new file mode 100644 index 0000000..77892cd --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/i82801db.asl @@ -0,0 +1,168 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device (USB0) +{ + Name (_ADR, 0x001D0000) + Name (_PRW, Package () { 0x03, 0x05 }) + + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), URES, 8 + } +} + +Device (USB1) +{ + Name (_ADR, 0x001D0001) + Name (_PRW, Package () { 0x04, 0x05 }) + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), URES, 8 + } +} + +Device (USB2) +{ + Name (_ADR, 0x001D0002) + Name (_PRW, Package () { 0x0C, 0x05 }) + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), URES, 8 + } +} + +Device (USB3) +{ + Name (_ADR, 0x001D0007) + Name (_PRW, Package () { 0x0D, 0x05 }) /* PME_B0_STS any 0:1d or 0:1f device */ + OperationRegion (USBS, PCI_Config, 0x00, 0x0100) + Field (USBS, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), URES, 8 + } +} + +Device(PCI5) +{ + Name (_ADR, 0x001E0000) + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + Name (_PRT, Package() { + Package() { 0x0003ffff, 0, 0, 20 }, + Package() { 0x0003ffff, 1, 0, 21 }, + Package() { 0x0003ffff, 2, 0, 22 }, + Package() { 0x0003ffff, 3, 0, 23 }, + }) +} + +Device (ICH0) +{ + Name (_ADR, 0x001F0000) + OperationRegion (D310, PCI_Config, 0x00, 0xFF) + Field (D310, ByteAcc, NoLock, Preserve) + { + Offset (0x40), PBAR, 16, + Offset (0x58), GBAR, 16, + } + + OperationRegion (ACPI, SystemIO, 0x0400, 0xC0) + Field (ACPI, ByteAcc, NoLock, Preserve) + { + Offset (0x00), PS1L,8, PS1H,8, PE1L,8, PE1H,8, + Offset (0x28), GS0L,8, GS0H,8, GSPL,8, GSPH,8, + Offset (0x2C), GE0L,8, GE0H,8, GEPL,8, GEPH,8, + Offset (0xB8), GPLV,8 + } + + Name (MSBF, ResourceTemplate () + { + /* IOAPIC 0 */ + Memory32Fixed (ReadWrite, IO_APIC_ADDR, 0x00001000,) + + IO (Decode16, 0x0, 0x0, 0x80, 0x0, PMIO) + IO (Decode16, 0x0, 0x0, 0x40, 0x0, GPIO) + + /* 8254 legacy irq */ + IO (Decode16, 0x04D0, 0x04D0, 0x02, 0x02,) + + /* reset generator */ + IO (Decode16, 0x0092, 0x0092, 0x01, 0x01, ) + }) + + Method (_CRS, 0, NotSerialized) + { + CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MIN, IOA1) + CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MAX, IOA2) + CreateByteField (MSBF, _SB_.PCI0.ICH0.PMIO._LEN, IOAL) + + Store (PBAR, Local0) + If ( Land(Local0, 0x01) ) + { + And (Local0, 0xFFFE, Local0) + Store (Local0, IOA1) + Store (Local0, IOA2) + Store (0x80, IOAL) + } Else { + Store (0x00, IOAL) + } + + CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MIN, IOS1) + CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MAX, IOS2) + CreateByteField (MSBF, _SB_.PCI0.ICH0.GPIO._LEN, IOSL) + + Store (GBAR, Local0) + If ( Land(Local0, 0x01) ) { + And (Local0, 0xFFFE, Local0) + Store (Local0, IOS1) + Store (Local0, IOS2) + Store (0x40, IOSL) + } Else { + Store (0x00, IOSL) + } + Return (MSBF) + } + + Device (FWH) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + + + Name (MSBG, ResourceTemplate () { + Memory32Fixed (ReadOnly, 0xFFF00000, 0x00080000,) + Memory32Fixed (ReadOnly, 0xFFF80000, 0x00080000,) + }) + + Method (_CRS, 0, NotSerialized) + { + Return (MSBG) + } + } + + Device (SMSC) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x02) + #include "acpi/superio.asl" + } + +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/p64h2.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/p64h2.asl new file mode 100644 index 0000000..cfd0763 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/p64h2.asl @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Interrupt routing for PCI 03:xx.x */ + +/* I/O APIC id 0x3 */ +Device(PBIO) +{ + Name (_HID, "ACPI000A") + Name (_ADR, 0x001c0000) +} + +/* PCI-X bridge */ +Device(P64B) +{ + Name (_ADR, 0x001d0000) + Name (_PRT, Package() { + Package() { 0x0002ffff, 0, 0, 24 }, /* PCI-X slot 1 */ + Package() { 0x0002ffff, 1, 0, 25 }, + Package() { 0x0002ffff, 2, 0, 26 }, + Package() { 0x0002ffff, 3, 0, 27 }, + Package() { 0x0003ffff, 0, 0, 28 }, /* PCI-X slot 2 */ + Package() { 0x0003ffff, 1, 0, 29 }, + Package() { 0x0003ffff, 2, 0, 30 }, + Package() { 0x0003ffff, 3, 0, 31 }, + Package() { 0x0004ffff, 0, 0, 32 }, /* On-board GbE */ + }) + + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) + Field (PBPC, ByteAcc, NoLock, Preserve) + { + Offset (0x3E), BCRL, 8, BCRH, 8 + } + + + Device (ETH0) + { + Name (_ADR, 0x00040000) + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + } +} + + +/* Interrupt routing for PCI 04:xx.x */ + +/* I/O APIC id 0x4 */ +Device(PAIO) +{ + Name (_HID, "ACPI000A") + Name (_ADR, 0x001e0000) +} + +/* PCI-X bridge */ +Device(P64A) +{ + Name (_ADR, 0x001f0000) + Name (_PRT, Package() { + Package() { 0x0002ffff, 0, 0, 48 }, /* PCI-X slot 3 */ + Package() { 0x0002ffff, 1, 0, 49 }, + Package() { 0x0002ffff, 2, 0, 50 }, + Package() { 0x0002ffff, 3, 0, 51 }, + Package() { 0x0003ffff, 0, 0, 52 }, /* PCI-X slot 4 */ + Package() { 0x0003ffff, 1, 0, 53 }, + Package() { 0x0003ffff, 2, 0, 54 }, + Package() { 0x0003ffff, 3, 0, 55 }, + Package() { 0x0004ffff, 0, 0, 54 }, /* On-board SCSI, GSI not 56 ? */ + Package() { 0x0004ffff, 1, 0, 55 }, /* On-board SCSI, GSI not 57 */ + }) + + Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ + OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) + Field (PBPC, ByteAcc, NoLock, Preserve) + { + Offset (0x3E), BCRL, 8, BCRH, 8 + } + + #include "acpi/scsi.asl" +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/power.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/power.asl new file mode 100644 index 0000000..9a18059 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/power.asl @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* Board powers on with button or PME# from on-board GbE wake-on-lan. + * Board shuts down to S5/G2. Any other power management is untested. + */ + +Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) +Name (_S1, Package () { 0x01, 0x01, 0x00, 0x00 }) +Name (_S3, Package () { 0x05, 0x05, 0x00, 0x00 }) +Name (_S4, Package () { 0x06, 0x06, 0x00, 0x00 }) +Name (_S5, Package () { 0x07, 0x07, 0x00, 0x00 }) + +Scope (_GPE) +{ + Method (_L03, 0, NotSerialized) + { + Notify (_SB.PCI0.USB0, 0x02) + } + Method (_L04, 0, NotSerialized) + { + Notify (_SB.PCI0.USB1, 0x02) + } + + /* WOL header */ + Method (_L08, 0, NotSerialized) + { + Notify (_SB.PCI0.PCI5, 0x02) + Notify (_SB.SLBT, 0x02) + } + + /* PME# */ + Method (_L0B, 0, NotSerialized) + { +#if 1 + Notify (_SB.LID0, 0x02) +#else + Notify (_SB.PCI0.HLIB.P64B.ETH0, 0x02) + Notify (_SB.PCI0.HLIB.P64B, 0x02) + Notify (_SB.PCI0.HLIB.P64A, 0x02) +#endif + } + + Method (_L0C, 0, NotSerialized) + { + Notify (_SB.PCI0.USB2, 0x02) + } + + /* PME_B0_STS# */ + Method (_L0D, 0, NotSerialized) + { + Notify (_SB.PCI0.USB3, 0x02) + } +} + +/* Clear power buttons */ +Method (_INI, 0, NotSerialized) +{ + Or (_SB.PCI0.ICH0.PS1H, 0x09, _SB.PCI0.ICH0.PS1H) + Or (_SB.PCI0.ICH0.PE1H, 0x01, _SB.PCI0.ICH0.PE1H) +} + +/* Prepare To Sleep */ +Method (_PTS, 1, NotSerialized) +{ + Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) + Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) +} + +/* System Wake */ +Method (_WAK, 1, NotSerialized) +{ + Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) + Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) + + Return ( Package() { 0x0, 0x0 } ) +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/scsi.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/scsi.asl new file mode 100644 index 0000000..2c315bc --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/scsi.asl @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* PCI-X devices 04:04.0 and 04:04.1 : AIC-7902W + * U320 SCSI dual-channel controller + */ + +Device (SCS0) +{ + Name (_ADR, 0x00040000) + OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) + Field (SCSC, ByteAcc, NoLock, Preserve) + { + Offset (0x2C), SID, 32, + Offset (0xE0), PMC, 8, + Offset (0xFF), IDW, 8 + } +} + +Device (SCS1) +{ + Name (_ADR, 0x00040001) + OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) + Field (SCSC, ByteAcc, NoLock, Preserve) + { + Offset (0x2C), SID, 32, + Offset (0xE0), PMC, 8, + Offset (0xFF), IDW, 8 + } +} + +#if 0 +/* Set subsystem id for both SCSI devices. + * It may require some delay on wake-up before this can be done. + */ + Method ( ) + { + Or (_SB.PCI0.HLIB.P64A.SCS0.IDW, 0x01, _SB.PCI0.HLIB.P64A.SCS0.IDW) + Store (0x1106A0A0, _SB.PCI0.HLIB.P64A.SCS0.SID) + And (_SB.PCI0.HLIB.P64A.SCS0.IDW, 0xFE, _SB.PCI0.HLIB.P64A.SCS0.IDW) + + Or (_SB.PCI0.HLIB.P64A.SCS1.IDW, 0x01, _SB.PCI0.HLIB.P64A.SCS1.IDW) + Store (0x1106A0A0, _SB.PCI0.HLIB.P64A.SCS1.SID) + And (_SB.PCI0.HLIB.P64A.SCS1.IDW, 0xFE, _SB.PCI0.HLIB.P64A.SCS1.IDW) + } +#endif diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi/superio.asl b/src/mainboard/aopen/dxpl_plus_u/acpi/superio.asl new file mode 100644 index 0000000..621a027 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi/superio.asl @@ -0,0 +1,182 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* SuperIO GPIO configuration via logical device 0x0A */ + +Name (MSBF, ResourceTemplate () +{ + IO (Decode16, 0x0000, 0x0000, 0x01, 0x80, _Y1B) +}) + +OperationRegion (LPC0, SystemIO, 0x0E00, 0x60) +Field (LPC0, ByteAcc, NoLock, Preserve) +{ + PME0, 8, + Offset (0x02), PME2,8, + Offset (0x04), PME4,8, + Offset (0x0A), PMEA,8, + Offset (0x23), + GC10,8, GC11,8, GC12,8, GC13,8, GC14,8, GC15,8, GC16,8, GC17,8, + GC20,8, GC21,8, GC22,8, GC23,8, GC24,8, GC25,8, GC26,8, GC27,8, + GC30,8, GC31,8, GC32,8, GC33,8, GC34,8, GC35,8, GC36,8, GC37,8, + GC40,8, GC41,8, GC42,8, GC43,8, + + Offset (0x3F), + GC50,8, GC51,8, GC52,8, GC53,8, GC54,8, GC55,8, GC56,8, GC57,8, + GC60,8, GC61,8, + + Offset (0x4B), + GP_1,8, GP_2,8, GP_3,8, GP_4,8, GP_5,8, GP_6,8, + Offset (0x56), FAN1,8, + Offset (0x5D), LED1,8, LED2,8, +} + +OperationRegion (SMC1, SystemIO, 0x2E, 0x02) +Field (SMC1, ByteAcc, NoLock, Preserve) +{ + INDX, 8, DATA, 8 +} + +IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) +{ + Offset (0x07), LDN, 8, + Offset (0x22), PWRC, 8, + Offset (0x30), ACTR, 8, + Offset (0x60), + IOAH, 8, IOAL, 8, + IOBH, 8, IOBL, 8, + + Offset (0x70), INTR, 8, + Offset (0x72), INT1, 8, + Offset (0x74), DMCH, 8, + Offset (0xB2), SPS1, 8, SPS2, 8, + Offset (0xB8), D2TS, 8, + Offset (0xF0), OPT1, 8, OPT2, 8, OPT3, 8, + Offset (0xF4), WDTC, 8, + Offset (0xF6), GP01, 8, GP02, 8, GP04, 8 +} + +Method (ECFG, 0, NotSerialized) +{ + Store (0x55, INDX) +} +Method (XCFG, 0, NotSerialized) +{ + Store (0xAA, INDX) +} + +Method (_CRS, 0, NotSerialized) +{ + CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MIN, IOM1) + CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MAX, IOM2) + CreateByteField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._LEN, IOML) + + ECFG () + Store (0x0A, _SB.PCI0.ICH0.SMSC.LDN) + Store (0x00, IOM1) + Store (0x00, IOM2) + Or (_SB.PCI0.ICH0.SMSC.IOAH, IOM1, IOM1) + ShiftLeft (IOM1, 0x08, IOM1) + Or (_SB.PCI0.ICH0.SMSC.IOAL, IOM1, IOM1) + Store (IOM1, IOM2) + If (LNotEqual (IOM1, 0x00)) + { + Store (0x80, IOML) + } + XCFG () + + Return (MSBF) +} + + +Method (_INI, 0, NotSerialized) +{ + /* GPIO configuration */ + Store (0x00, GC10) + Store (0x81, GC11) + Store (0x00, GC17) + Store (0x0c, GC21) + Store (0x00, GC22) + Store (0x04, GC27) + Store (0x04, GC30) + Store (0x01, GC31) + Store (0x01, GC32) + Store (0x01, GC33) + Store (0x01, GC34) /* GPI password jumper */ + Store (0x01, GC35) /* GPI scsi enable jumper */ +#if 1 + Store (0x01, GC42) /* GPI */ +#else + Store (0x84, GC42) /* nIO_PME */ +#endif + Store (0x86, GC60) /* led 1 */ + Store (0x81, GC61) /* led 2 ?? */ + + /* GPIO initial output levels */ + Store (GP_1, Local0) + And( Local0, 0x7C, Local0) + Or ( Local0, 0x81, Local0) + Store (Local0, GP_1) + + Store (GP_2, Local0) + And( Local0, 0xFE, Local0) + Or ( Local0, 0x00, Local0) + Store (Local0, GP_2) + + Store (GP_3, Local0) + And( Local0, 0x7F, Local0) + Or ( Local0, 0x80, Local0) + Store (Local0, GP_3) + + Store (GP_4, Local0) + And( Local0, 0x7F, Local0) + Or ( Local0, 0x00, Local0) + Store (Local0, GP_4) + + /* Power Led */ + Store (LED1, Local0) + And( Local0, 0xfc, Local0) + Or ( Local0, 0x01, Local0) + Store (Local0, LED1) + +} + +Method (MLED, 1, NotSerialized) +{ + If (LEqual (Arg0, 0x00)) + { + Store (0x00, LED1) + } + + If (LOr (LEqual (Arg0, 0x01), LEqual (Arg0, 0x02))) + { + Store (0x01, LED1) + } + + If (LEqual (Arg0, 0x03)) + { + Store (0x02, LED1) + } + + If (LOr (LEqual (Arg0, 0x04), LEqual (Arg0, 0x05))) + { + Store (0x03, LED1) + } +} diff --git a/src/mainboard/aopen/dxpl_plus_u/acpi_tables.c b/src/mainboard/aopen/dxpl_plus_u/acpi_tables.c new file mode 100644 index 0000000..405c420 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/acpi_tables.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * (C) 2005 Digital Design Corporation + * + * Ported to Intel XE7501DEVKIT by Agami Aruma + * Ported to AOpen DXPL Plus-U by Kyösti Mälkki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <assert.h> +#include "bus.h" + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int irq_start = 0; + device_t dev = 0; + struct resource* res = NULL; + + // SJM: Hard-code CPU LAPIC entries for now + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 6); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 1); + current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 7); + + // Southbridge IOAPIC + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH4, 0xfec00000, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2 Bus B IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_B, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + // P64H2 Bus A IOAPIC + dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); + if (!dev) + BUG(); // Config.lb error? + res = find_resource(dev, PCI_BASE_ADDRESS_0); + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_A, res->base, irq_start); + irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; + + + // Map ISA IRQ 0 to IRQ 2 + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0); + + // IRQ9 differs from ISA standard - ours is active high, level-triggered + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD); + + return current; +} diff --git a/src/mainboard/aopen/dxpl_plus_u/board_info.txt b/src/mainboard/aopen/dxpl_plus_u/board_info.txt new file mode 100644 index 0000000..4e50628 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/board_info.txt @@ -0,0 +1,6 @@ +Category: server +Board URL: ftp://ftp.aopen.com/pub/server/motherboard/dxplpu/manual/dxplpu-ol-e.pdf +ROM package: PLCC +ROM protocol: FWH +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/aopen/dxpl_plus_u/bus.h b/src/mainboard/aopen/dxpl_plus_u/bus.h new file mode 100644 index 0000000..eaf9ac7 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/bus.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef DXPL_PLUS_U_BUS_H_INCLUDED +#define DXPL_PLUS_U_BUS_H_INCLUDED + +// These were determined by seeing how coreboot enumerates the various +// PCI (and PCI-like) buses on the board. + +#define PCI_BUS_ROOT 0 +#define PCI_BUS_AGP 1 // AGP +#define PCI_BUS_E7501_HI_B 2 // P64H2#1 +#define PCI_BUS_P64H2_B 3 // P64H2#1 bus B +#define PCI_BUS_P64H2_A 4 // P64H2#1 bus A +#define PCI_BUS_ICH4 5 // ICH4 + +// IOAPIC addresses determined by coreboot enumeration. +// Someday add functions to get APIC IDs and versions from the chips themselves. + +#define IOAPIC_ICH4 2 +#define IOAPIC_P64H2_BUS_B 3 // IOAPIC 3 at 02:1c.0 MBAR = fe300000 DataAddr = fe300010 +#define IOAPIC_P64H2_BUS_A 4 // IOAPIC 4 at 02:1e.0 MBAR = fe301000 DataAddr = fe301010 + +#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-4 and P64-H2 + +#endif diff --git a/src/mainboard/aopen/dxpl_plus_u/devicetree.cb b/src/mainboard/aopen/dxpl_plus_u/devicetree.cb new file mode 100644 index 0000000..f43aec8 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/devicetree.cb @@ -0,0 +1,90 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/e7505 + + device cpu_cluster 0 on + chip cpu/intel/socket_mPGA604 + device lapic 0 on end + device lapic 6 on end + end + end + + device domain 0 on + device pci 0.0 on end # Chipset host controller + device pci 0.1 on end # Host RASUM controller + device pci 2.0 on # Hub interface B + chip southbridge/intel/i82870 # P64H2 + device pci 1c.0 on end # IOAPIC - bus B + device pci 1d.0 on end # Hub to PCI-B bridge + device pci 1e.0 on end # IOAPIC - bus A + device pci 1f.0 on end # Hub to PCI-A bridge + end + end + device pci 4.0 off end # (undocumented) + device pci 6.0 off end # (undocumented) + chip southbridge/intel/i82801dx + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.7 on end # USB EHCI + device pci 1e.0 on # Hub to PCI bridge + device pci 2.0 off end + end + device pci 1f.0 on # LPC bridge + chip superio/smsc/lpc47m10x + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a on # ACPI + io 0x60 = 0x0e00 + end + end + end + device pci 1f.1 on end # IDE + register "ide0_enable" = "1" + register "ide1_enable" = "1" + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC97 Audio + device pci 1f.6 off end # AC97 Modem + end # SB + end # PCI domain +end diff --git a/src/mainboard/aopen/dxpl_plus_u/dsdt.asl b/src/mainboard/aopen/dxpl_plus_u/dsdt.asl new file mode 100644 index 0000000..6c43dd5 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/dsdt.asl @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/ioapic.h> + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x04, // DSDT revision: ACPI v4.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20111103 // OEM revision +) { + +Scope(_SB) +{ + Device(PCI0) { + Name (_HID, EISAID("PNP0A03")) + Name (_ADR, 0x00) + Name (_PRT, Package() { + Package() { 0x001dffff, 0, 0, 16 }, + Package() { 0x001dffff, 1, 0, 19 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 23 }, + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 17 }, + }) + + #include "acpi/e7505_sec.asl" + + OperationRegion (I750, PCI_Config, 0x00, 0x0100) + Field (I750, ByteAcc, NoLock, Preserve) + { + Offset (0xC4), + TOLM, 16, /* Top of Low Memory */ + RBAR, 16, /* REMAP_BASE */ + RLAR, 16 /* REMAP_LIMIT */ + } + } + + #include "acpi/e7505_pri.asl" + + + Device (PWBT) + { + Name (_HID, EisaId ("PNP0C0C")) + Name (_PRW, Package () { 0x08, 0x05 }) + } + + Device (SLBT) + { + Name (_HID, EisaId ("PNP0C0E")) + Name (_PRW, Package () { 0x0B, 0x05 }) + } + + Device (LID0) + { + Name (_HID, EisaId ("PNP0C0D")) + Name (_PRW, Package () { 0x0B, 0x05 }) + } + +} + +Scope(_SB.PCI0) +{ + + Device(PCI1) + { + Name (_ADR, 0x00010000) + Name (_PRT, Package() { + Package() { 0x0000ffff, 0, 0, 16 }, + Package() { 0x0000ffff, 1, 0, 17 }, + }) + } + + Device(HLIB) + { + Name (_ADR, 0x00020000) + Name (_PRT, Package() { + Package() { 0x001dffff, 0, 0, 18 }, + Package() { 0x001dffff, 1, 0, 18 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 18 }, + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 18 }, + Package() { 0x001fffff, 2, 0, 18 }, + Package() { 0x001fffff, 3, 0, 18 }, + }) + + #include "acpi/p64h2.asl" + } + + #include "acpi/i82801db.asl" +} + +#include "acpi/power.asl" + +} diff --git a/src/mainboard/aopen/dxpl_plus_u/fadt.c b/src/mainboard/aopen/dxpl_plus_u/fadt.c new file mode 100644 index 0000000..9707b9d --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/fadt.c @@ -0,0 +1,166 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ +#define APM_CNT 0x0 /* ACPI mode only */ +#define CST_CONTROL 0x85 +#define PST_CONTROL 0x0 +#define ACPI_DISABLE 0xAA +#define ACPI_ENABLE 0x55 +#define S4_BIOS 0x77 +#define GNVS_UPDATE 0xea + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 4; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = 0; /* PM_MOBILE; */ + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = ACPI_ENABLE; + fadt->acpi_disable = ACPI_DISABLE; + fadt->s4bios_req = S4_BIOS; + fadt->pstate_cnt = PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = 0x0; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x28; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0) + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; /* CST_CONTROL; */ + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 85; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = 0x03; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x28; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/aopen/dxpl_plus_u/irq_tables.c b/src/mainboard/aopen/dxpl_plus_u/irq_tables.c new file mode 100644 index 0000000..a59d7e8 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/irq_tables.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include "bus.h" + +#define UNUSED_INTERRUPT {0, 0} +#define PIRQ_A 0x60 +#define PIRQ_B 0x61 +#define PIRQ_C 0x62 +#define PIRQ_D 0x63 +#define PIRQ_E 0x68 +#define PIRQ_F 0x69 +#define PIRQ_G 0x6A +#define PIRQ_H 0x6B + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, // Size of this struct in bytes + 0, // PCI bus number on which the interrupt router resides + PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router + 0, // PCI-exclusive IRQ bitmap + PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router + PCI_DEVICE_ID_INTEL_82801DB_LPC, // Device ID of compatible PCI interrupt router + 0, // Additional miniport information + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero + 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0) + { + // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space + // This was determined from linux-2.6.11/arch/i386/pci/irq.c + // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15 + // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13 + // Not sure why IRQ9 isn't routable (inherited from Tyan S2735) + + // INTA# INTB# INTC# INTD# + // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu + + {PCI_BUS_ROOT, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus + {PCI_BUS_ROOT, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // USB 1.1 + + {PCI_BUS_P64H2_B, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_B, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_B, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // GbE + + {PCI_BUS_P64H2_A, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_A, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, + {PCI_BUS_P64H2_A, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // SCSI + + {PCI_BUS_ICH4, PCI_DEVFN(3, 0), {{PIRQ_E, 0xdcf8}, {PIRQ_F, 0xdcf8}, {PIRQ_G, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // 32-bit slot + + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/aopen/dxpl_plus_u/romstage.c b/src/mainboard/aopen/dxpl_plus_u/romstage.c new file mode 100644 index 0000000..86470b3 --- /dev/null +++ b/src/mainboard/aopen/dxpl_plus_u/romstage.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <arch/cpu.h> +#include <stdlib.h> +#include <console/console.h> +#include <cpu/x86/bist.h> + +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "northbridge/intel/e7505/raminit.h" + +#include <device/pnp_def.h> +#include "superio/smsc/lpc47m10x/early_serial.c" + + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47M10X2_SP1) + +int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + { + .d0 = PCI_DEV(0, 0, 0), + .d0f1 = PCI_DEV(0, 0, 1), + .channel0 = { 0x50, 0x52, 0, 0 }, + .channel1 = { 0x51, 0x53, 0, 0 }, + }, + }; + + // Get the serial port running and print a welcome banner + lpc47m10x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + // Halt if there was a built in self test failure + report_bist_failure(bist); + + // If this is a warm boot, some initialization can be skipped + if (!e7505_mch_is_ready()) { + enable_smbus(); + + /* The real MCH initialisation. */ + e7505_mch_init(memctrl); + + /* + * ECC scrub invalidates cache, so all stack in CAR + * is lost. Only return addresses from main() and + * scrub_ecc() are recovered to stack via xmm0-xmm3. + */ +#if CONFIG_HW_SCRUBBER +#if !CONFIG_USBDEBUG_IN_ROMSTAGE + unsigned long ret_addr = (unsigned long)((unsigned long*)&bist - 1); + e7505_mch_scrub_ecc(ret_addr); +#endif +#endif + + /* Hook for post ECC scrub settings and debug. */ + e7505_mch_done(memctrl); + } + + printk(BIOS_DEBUG, "SDRAM is up.\n"); +} diff --git a/src/mainboard/aopen/dxplplusu/Kconfig b/src/mainboard/aopen/dxplplusu/Kconfig deleted file mode 100644 index 1802b5a..0000000 --- a/src/mainboard/aopen/dxplplusu/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -if BOARD_AOPEN_DXPLPLUSU - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA604 - select NORTHBRIDGE_INTEL_E7505 - select SOUTHBRIDGE_INTEL_I82870 - select SOUTHBRIDGE_INTEL_I82801DX - select SUPERIO_SMSC_LPC47M10X -# select HAVE_PIRQ_TABLE -# select PIRQ_ROUTE - select UDELAY_TSC - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select HW_SCRUBBER - -config MAINBOARD_DIR - string - default aopen/dxplplusu - -config MAINBOARD_PART_NUMBER - string - default "DXPL Plus-U" - -config IRQ_SLOT_COUNT - int - default 12 - -config MAX_CPUS - int - default 4 - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x0 - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x0 - -endif # BOARD_AOPEN_DXPLPLUSU diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl deleted file mode 100644 index 2818e4a..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Device (MBRS) -{ - Name (_HID, EisaId ("PNP0C01")) - Name (_UID, 0x01) - Name (MSBF, ResourceTemplate () - { - /* System memory */ - QWordMemory (ResourceProducer, PosDecode, MinFixed, - MaxNotFixed, Prefetchable, ReadWrite, - 0x0, 0x100000000, 0x400000000, 0x0, 0x0, ,, _Y1C, - AddressRangeMemory, TypeStatic) - - /* Top Of Low Memory */ - Memory32 (ReadOnly, 0x0, 0x0, 0x1, 0x0, _Y1D) - - /* 640kB who wants more? */ - Memory32Fixed (ReadWrite, 0x0, 0xA0000, ) - - /* 64k BIOS bootblock */ - Memory32Fixed (ReadOnly, 0xF0000, 0x10000,) - - /* ISA memory hole 15-16 MB ? */ - /* Memory32Fixed (ReadOnly, 0x100000, 0xF00000,) */ - /* ISA memory hole 14-15 MB ? */ - /* Memory32Fixed (ReadOnly, 0x100000, 0xE00000,) */ - - /* Local APIC */ - Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000,) - }) - - Method (_CRS, 0, NotSerialized) - { - CreateQWordField (MSBF, _SB.MBRS._Y1C._MIN, MEML) - CreateQWordField (MSBF, _SB.MBRS._Y1C._MAX, MEMM) - CreateQWordField (MSBF, _SB.MBRS._Y1C._LEN, LELM) - - And (_SB.PCI0.RLAR, 0x03FF, Local1) - Increment (Local1) - If (LGreater (Local1, 0x40)) - { - ShiftLeft (Local1, 0x1A, LELM) - } - - - CreateDWordField (MSBF, _SB.MBRS._Y1D._MIN, MS00) - CreateDWordField (MSBF, _SB.MBRS._Y1D._MAX, MS01) - CreateDWordField (MSBF, _SB.MBRS._Y1D._LEN, MEM2) - And (_SB.PCI0.TOLM, 0xF800, Local1) - ShiftRight (Local1, 0x04, Local1) - Decrement (Local1) - If (LGreater (Local1, 0x10)) - { - Subtract (Local1, 0x0F, Local1) - Store (ShiftLeft (Local1, 0x14), MEM2) - Store (0x01000000, MS00) - Store (MS00, MS01) - } - - Return (MSBF) - } - - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl deleted file mode 100644 index eb59dd7..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Name (PBRS, ResourceTemplate () -{ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, 0x0000, 0x00FF, 0x0000, 0x0100, ,, ) - - /* System IO */ - DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0, 0x0, 0xffff, 0x0000, 0x10000, ,,, TypeStatic) - IO (Decode16, 0x0CF8, 0x0CF8, 0x08, 0x08, ) - - /* Video RAM */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000A0000, 0x000BFFFF, - 0x00000000, 0x00020000, ,,, AddressRangeMemory, TypeStatic) - - /* Video ROM */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000C0000, 0x000C7FFF, - 0x00000000, 0x00008000, ,,, AddressRangeMemory, TypeStatic) - - /* Option ROMs ? */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x000C8000, 0x000DFFFF, - 0x00000000, 0x00018000, ,,, AddressRangeMemory, TypeStatic) - - /* Top Of Lowmemory to IOAPIC */ - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, 0x00000000, 0xFEBFFFFF, - 0x00000000, IO_APIC_ADDR, ,, _Y08, AddressRangeMemory, TypeStatic) -}) - - -Method (_CRS, 0, NotSerialized) -{ - - /* Top Of Lowmemory to IOAPIC */ - CreateDWordField (PBRS, _SB.PCI0._Y08._MIN, MEML) - CreateDWordField (PBRS, _SB.PCI0._Y08._MAX, MEMH) - CreateDWordField (PBRS, _SB.PCI0._Y08._LEN, LENM) - And (_SB.PCI0.TOLM, 0xF800, Local1) - ShiftRight (Local1, 0x04, Local1) - ShiftLeft (Local1, 0x14, MEML) - Subtract (IO_APIC_ADDR, 0x01, MEMH) - Subtract (IO_APIC_ADDR, MEML, LENM) - - Return (PBRS) -} - -Method (_STA, 0, NotSerialized) -{ - Return (0x0F) -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl deleted file mode 100644 index 77892cd..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Device (USB0) -{ - Name (_ADR, 0x001D0000) - Name (_PRW, Package () { 0x03, 0x05 }) - - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB1) -{ - Name (_ADR, 0x001D0001) - Name (_PRW, Package () { 0x04, 0x05 }) - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB2) -{ - Name (_ADR, 0x001D0002) - Name (_PRW, Package () { 0x0C, 0x05 }) - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device (USB3) -{ - Name (_ADR, 0x001D0007) - Name (_PRW, Package () { 0x0D, 0x05 }) /* PME_B0_STS any 0:1d or 0:1f device */ - OperationRegion (USBS, PCI_Config, 0x00, 0x0100) - Field (USBS, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), URES, 8 - } -} - -Device(PCI5) -{ - Name (_ADR, 0x001E0000) - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - Name (_PRT, Package() { - Package() { 0x0003ffff, 0, 0, 20 }, - Package() { 0x0003ffff, 1, 0, 21 }, - Package() { 0x0003ffff, 2, 0, 22 }, - Package() { 0x0003ffff, 3, 0, 23 }, - }) -} - -Device (ICH0) -{ - Name (_ADR, 0x001F0000) - OperationRegion (D310, PCI_Config, 0x00, 0xFF) - Field (D310, ByteAcc, NoLock, Preserve) - { - Offset (0x40), PBAR, 16, - Offset (0x58), GBAR, 16, - } - - OperationRegion (ACPI, SystemIO, 0x0400, 0xC0) - Field (ACPI, ByteAcc, NoLock, Preserve) - { - Offset (0x00), PS1L,8, PS1H,8, PE1L,8, PE1H,8, - Offset (0x28), GS0L,8, GS0H,8, GSPL,8, GSPH,8, - Offset (0x2C), GE0L,8, GE0H,8, GEPL,8, GEPH,8, - Offset (0xB8), GPLV,8 - } - - Name (MSBF, ResourceTemplate () - { - /* IOAPIC 0 */ - Memory32Fixed (ReadWrite, IO_APIC_ADDR, 0x00001000,) - - IO (Decode16, 0x0, 0x0, 0x80, 0x0, PMIO) - IO (Decode16, 0x0, 0x0, 0x40, 0x0, GPIO) - - /* 8254 legacy irq */ - IO (Decode16, 0x04D0, 0x04D0, 0x02, 0x02,) - - /* reset generator */ - IO (Decode16, 0x0092, 0x0092, 0x01, 0x01, ) - }) - - Method (_CRS, 0, NotSerialized) - { - CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MIN, IOA1) - CreateWordField (MSBF, _SB_.PCI0.ICH0.PMIO._MAX, IOA2) - CreateByteField (MSBF, _SB_.PCI0.ICH0.PMIO._LEN, IOAL) - - Store (PBAR, Local0) - If ( Land(Local0, 0x01) ) - { - And (Local0, 0xFFFE, Local0) - Store (Local0, IOA1) - Store (Local0, IOA2) - Store (0x80, IOAL) - } Else { - Store (0x00, IOAL) - } - - CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MIN, IOS1) - CreateWordField (MSBF, _SB_.PCI0.ICH0.GPIO._MAX, IOS2) - CreateByteField (MSBF, _SB_.PCI0.ICH0.GPIO._LEN, IOSL) - - Store (GBAR, Local0) - If ( Land(Local0, 0x01) ) { - And (Local0, 0xFFFE, Local0) - Store (Local0, IOS1) - Store (Local0, IOS2) - Store (0x40, IOSL) - } Else { - Store (0x00, IOSL) - } - Return (MSBF) - } - - Device (FWH) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - - - Name (MSBG, ResourceTemplate () { - Memory32Fixed (ReadOnly, 0xFFF00000, 0x00080000,) - Memory32Fixed (ReadOnly, 0xFFF80000, 0x00080000,) - }) - - Method (_CRS, 0, NotSerialized) - { - Return (MSBG) - } - } - - Device (SMSC) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x02) - #include "acpi/superio.asl" - } - -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl deleted file mode 100644 index cfd0763..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Interrupt routing for PCI 03:xx.x */ - -/* I/O APIC id 0x3 */ -Device(PBIO) -{ - Name (_HID, "ACPI000A") - Name (_ADR, 0x001c0000) -} - -/* PCI-X bridge */ -Device(P64B) -{ - Name (_ADR, 0x001d0000) - Name (_PRT, Package() { - Package() { 0x0002ffff, 0, 0, 24 }, /* PCI-X slot 1 */ - Package() { 0x0002ffff, 1, 0, 25 }, - Package() { 0x0002ffff, 2, 0, 26 }, - Package() { 0x0002ffff, 3, 0, 27 }, - Package() { 0x0003ffff, 0, 0, 28 }, /* PCI-X slot 2 */ - Package() { 0x0003ffff, 1, 0, 29 }, - Package() { 0x0003ffff, 2, 0, 30 }, - Package() { 0x0003ffff, 3, 0, 31 }, - Package() { 0x0004ffff, 0, 0, 32 }, /* On-board GbE */ - }) - - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) - Field (PBPC, ByteAcc, NoLock, Preserve) - { - Offset (0x3E), BCRL, 8, BCRH, 8 - } - - - Device (ETH0) - { - Name (_ADR, 0x00040000) - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - } -} - - -/* Interrupt routing for PCI 04:xx.x */ - -/* I/O APIC id 0x4 */ -Device(PAIO) -{ - Name (_HID, "ACPI000A") - Name (_ADR, 0x001e0000) -} - -/* PCI-X bridge */ -Device(P64A) -{ - Name (_ADR, 0x001f0000) - Name (_PRT, Package() { - Package() { 0x0002ffff, 0, 0, 48 }, /* PCI-X slot 3 */ - Package() { 0x0002ffff, 1, 0, 49 }, - Package() { 0x0002ffff, 2, 0, 50 }, - Package() { 0x0002ffff, 3, 0, 51 }, - Package() { 0x0003ffff, 0, 0, 52 }, /* PCI-X slot 4 */ - Package() { 0x0003ffff, 1, 0, 53 }, - Package() { 0x0003ffff, 2, 0, 54 }, - Package() { 0x0003ffff, 3, 0, 55 }, - Package() { 0x0004ffff, 0, 0, 54 }, /* On-board SCSI, GSI not 56 ? */ - Package() { 0x0004ffff, 1, 0, 55 }, /* On-board SCSI, GSI not 57 */ - }) - - Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */ - OperationRegion (PBPC, PCI_Config, 0x00, 0xFF) - Field (PBPC, ByteAcc, NoLock, Preserve) - { - Offset (0x3E), BCRL, 8, BCRH, 8 - } - - #include "acpi/scsi.asl" -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/power.asl b/src/mainboard/aopen/dxplplusu/acpi/power.asl deleted file mode 100644 index 9a18059..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/power.asl +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -/* Board powers on with button or PME# from on-board GbE wake-on-lan. - * Board shuts down to S5/G2. Any other power management is untested. - */ - -Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) -Name (_S1, Package () { 0x01, 0x01, 0x00, 0x00 }) -Name (_S3, Package () { 0x05, 0x05, 0x00, 0x00 }) -Name (_S4, Package () { 0x06, 0x06, 0x00, 0x00 }) -Name (_S5, Package () { 0x07, 0x07, 0x00, 0x00 }) - -Scope (_GPE) -{ - Method (_L03, 0, NotSerialized) - { - Notify (_SB.PCI0.USB0, 0x02) - } - Method (_L04, 0, NotSerialized) - { - Notify (_SB.PCI0.USB1, 0x02) - } - - /* WOL header */ - Method (_L08, 0, NotSerialized) - { - Notify (_SB.PCI0.PCI5, 0x02) - Notify (_SB.SLBT, 0x02) - } - - /* PME# */ - Method (_L0B, 0, NotSerialized) - { -#if 1 - Notify (_SB.LID0, 0x02) -#else - Notify (_SB.PCI0.HLIB.P64B.ETH0, 0x02) - Notify (_SB.PCI0.HLIB.P64B, 0x02) - Notify (_SB.PCI0.HLIB.P64A, 0x02) -#endif - } - - Method (_L0C, 0, NotSerialized) - { - Notify (_SB.PCI0.USB2, 0x02) - } - - /* PME_B0_STS# */ - Method (_L0D, 0, NotSerialized) - { - Notify (_SB.PCI0.USB3, 0x02) - } -} - -/* Clear power buttons */ -Method (_INI, 0, NotSerialized) -{ - Or (_SB.PCI0.ICH0.PS1H, 0x09, _SB.PCI0.ICH0.PS1H) - Or (_SB.PCI0.ICH0.PE1H, 0x01, _SB.PCI0.ICH0.PE1H) -} - -/* Prepare To Sleep */ -Method (_PTS, 1, NotSerialized) -{ - Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) - Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) -} - -/* System Wake */ -Method (_WAK, 1, NotSerialized) -{ - Or (_SB.PCI0.ICH0.GS0H, 0x19, _SB.PCI0.ICH0.GS0H) - Or (_SB.PCI0.ICH0.GS0L, 0x11, _SB.PCI0.ICH0.GS0L) - - Return ( Package() { 0x0, 0x0 } ) -} diff --git a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl deleted file mode 100644 index 2c315bc..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* PCI-X devices 04:04.0 and 04:04.1 : AIC-7902W - * U320 SCSI dual-channel controller - */ - -Device (SCS0) -{ - Name (_ADR, 0x00040000) - OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) - Field (SCSC, ByteAcc, NoLock, Preserve) - { - Offset (0x2C), SID, 32, - Offset (0xE0), PMC, 8, - Offset (0xFF), IDW, 8 - } -} - -Device (SCS1) -{ - Name (_ADR, 0x00040001) - OperationRegion (SCSC, PCI_Config, 0x00, 0x0100) - Field (SCSC, ByteAcc, NoLock, Preserve) - { - Offset (0x2C), SID, 32, - Offset (0xE0), PMC, 8, - Offset (0xFF), IDW, 8 - } -} - -#if 0 -/* Set subsystem id for both SCSI devices. - * It may require some delay on wake-up before this can be done. - */ - Method ( ) - { - Or (_SB.PCI0.HLIB.P64A.SCS0.IDW, 0x01, _SB.PCI0.HLIB.P64A.SCS0.IDW) - Store (0x1106A0A0, _SB.PCI0.HLIB.P64A.SCS0.SID) - And (_SB.PCI0.HLIB.P64A.SCS0.IDW, 0xFE, _SB.PCI0.HLIB.P64A.SCS0.IDW) - - Or (_SB.PCI0.HLIB.P64A.SCS1.IDW, 0x01, _SB.PCI0.HLIB.P64A.SCS1.IDW) - Store (0x1106A0A0, _SB.PCI0.HLIB.P64A.SCS1.SID) - And (_SB.PCI0.HLIB.P64A.SCS1.IDW, 0xFE, _SB.PCI0.HLIB.P64A.SCS1.IDW) - } -#endif diff --git a/src/mainboard/aopen/dxplplusu/acpi/superio.asl b/src/mainboard/aopen/dxplplusu/acpi/superio.asl deleted file mode 100644 index 621a027..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi/superio.asl +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -/* SuperIO GPIO configuration via logical device 0x0A */ - -Name (MSBF, ResourceTemplate () -{ - IO (Decode16, 0x0000, 0x0000, 0x01, 0x80, _Y1B) -}) - -OperationRegion (LPC0, SystemIO, 0x0E00, 0x60) -Field (LPC0, ByteAcc, NoLock, Preserve) -{ - PME0, 8, - Offset (0x02), PME2,8, - Offset (0x04), PME4,8, - Offset (0x0A), PMEA,8, - Offset (0x23), - GC10,8, GC11,8, GC12,8, GC13,8, GC14,8, GC15,8, GC16,8, GC17,8, - GC20,8, GC21,8, GC22,8, GC23,8, GC24,8, GC25,8, GC26,8, GC27,8, - GC30,8, GC31,8, GC32,8, GC33,8, GC34,8, GC35,8, GC36,8, GC37,8, - GC40,8, GC41,8, GC42,8, GC43,8, - - Offset (0x3F), - GC50,8, GC51,8, GC52,8, GC53,8, GC54,8, GC55,8, GC56,8, GC57,8, - GC60,8, GC61,8, - - Offset (0x4B), - GP_1,8, GP_2,8, GP_3,8, GP_4,8, GP_5,8, GP_6,8, - Offset (0x56), FAN1,8, - Offset (0x5D), LED1,8, LED2,8, -} - -OperationRegion (SMC1, SystemIO, 0x2E, 0x02) -Field (SMC1, ByteAcc, NoLock, Preserve) -{ - INDX, 8, DATA, 8 -} - -IndexField (INDX, DATA, ByteAcc, NoLock, Preserve) -{ - Offset (0x07), LDN, 8, - Offset (0x22), PWRC, 8, - Offset (0x30), ACTR, 8, - Offset (0x60), - IOAH, 8, IOAL, 8, - IOBH, 8, IOBL, 8, - - Offset (0x70), INTR, 8, - Offset (0x72), INT1, 8, - Offset (0x74), DMCH, 8, - Offset (0xB2), SPS1, 8, SPS2, 8, - Offset (0xB8), D2TS, 8, - Offset (0xF0), OPT1, 8, OPT2, 8, OPT3, 8, - Offset (0xF4), WDTC, 8, - Offset (0xF6), GP01, 8, GP02, 8, GP04, 8 -} - -Method (ECFG, 0, NotSerialized) -{ - Store (0x55, INDX) -} -Method (XCFG, 0, NotSerialized) -{ - Store (0xAA, INDX) -} - -Method (_CRS, 0, NotSerialized) -{ - CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MIN, IOM1) - CreateWordField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._MAX, IOM2) - CreateByteField (MSBF, _SB.PCI0.ICH0.SMSC._Y1B._LEN, IOML) - - ECFG () - Store (0x0A, _SB.PCI0.ICH0.SMSC.LDN) - Store (0x00, IOM1) - Store (0x00, IOM2) - Or (_SB.PCI0.ICH0.SMSC.IOAH, IOM1, IOM1) - ShiftLeft (IOM1, 0x08, IOM1) - Or (_SB.PCI0.ICH0.SMSC.IOAL, IOM1, IOM1) - Store (IOM1, IOM2) - If (LNotEqual (IOM1, 0x00)) - { - Store (0x80, IOML) - } - XCFG () - - Return (MSBF) -} - - -Method (_INI, 0, NotSerialized) -{ - /* GPIO configuration */ - Store (0x00, GC10) - Store (0x81, GC11) - Store (0x00, GC17) - Store (0x0c, GC21) - Store (0x00, GC22) - Store (0x04, GC27) - Store (0x04, GC30) - Store (0x01, GC31) - Store (0x01, GC32) - Store (0x01, GC33) - Store (0x01, GC34) /* GPI password jumper */ - Store (0x01, GC35) /* GPI scsi enable jumper */ -#if 1 - Store (0x01, GC42) /* GPI */ -#else - Store (0x84, GC42) /* nIO_PME */ -#endif - Store (0x86, GC60) /* led 1 */ - Store (0x81, GC61) /* led 2 ?? */ - - /* GPIO initial output levels */ - Store (GP_1, Local0) - And( Local0, 0x7C, Local0) - Or ( Local0, 0x81, Local0) - Store (Local0, GP_1) - - Store (GP_2, Local0) - And( Local0, 0xFE, Local0) - Or ( Local0, 0x00, Local0) - Store (Local0, GP_2) - - Store (GP_3, Local0) - And( Local0, 0x7F, Local0) - Or ( Local0, 0x80, Local0) - Store (Local0, GP_3) - - Store (GP_4, Local0) - And( Local0, 0x7F, Local0) - Or ( Local0, 0x00, Local0) - Store (Local0, GP_4) - - /* Power Led */ - Store (LED1, Local0) - And( Local0, 0xfc, Local0) - Or ( Local0, 0x01, Local0) - Store (Local0, LED1) - -} - -Method (MLED, 1, NotSerialized) -{ - If (LEqual (Arg0, 0x00)) - { - Store (0x00, LED1) - } - - If (LOr (LEqual (Arg0, 0x01), LEqual (Arg0, 0x02))) - { - Store (0x01, LED1) - } - - If (LEqual (Arg0, 0x03)) - { - Store (0x02, LED1) - } - - If (LOr (LEqual (Arg0, 0x04), LEqual (Arg0, 0x05))) - { - Store (0x03, LED1) - } -} diff --git a/src/mainboard/aopen/dxplplusu/acpi_tables.c b/src/mainboard/aopen/dxplplusu/acpi_tables.c deleted file mode 100644 index 405c420..0000000 --- a/src/mainboard/aopen/dxplplusu/acpi_tables.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org - * (C) 2005 Stefan Reinauer - * (C) 2005 Digital Design Corporation - * - * Ported to Intel XE7501DEVKIT by Agami Aruma - * Ported to AOpen DXPL Plus-U by Kyösti Mälkki - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <assert.h> -#include "bus.h" - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int irq_start = 0; - device_t dev = 0; - struct resource* res = NULL; - - // SJM: Hard-code CPU LAPIC entries for now - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 6); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 1); - current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 7); - - // Southbridge IOAPIC - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH4, 0xfec00000, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - - // P64H2 Bus B IOAPIC - dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); - if (!dev) - BUG(); // Config.lb error? - res = find_resource(dev, PCI_BASE_ADDRESS_0); - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_B, res->base, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - - // P64H2 Bus A IOAPIC - dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); - if (!dev) - BUG(); // Config.lb error? - res = find_resource(dev, PCI_BASE_ADDRESS_0); - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_A, res->base, irq_start); - irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; - - - // Map ISA IRQ 0 to IRQ 2 - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0); - - // IRQ9 differs from ISA standard - ours is active high, level-triggered - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD); - - return current; -} diff --git a/src/mainboard/aopen/dxplplusu/board_info.txt b/src/mainboard/aopen/dxplplusu/board_info.txt deleted file mode 100644 index 4e50628..0000000 --- a/src/mainboard/aopen/dxplplusu/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: server -Board URL: ftp://ftp.aopen.com/pub/server/motherboard/dxplpu/manual/dxplpu-ol-e.pdf -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/aopen/dxplplusu/bus.h b/src/mainboard/aopen/dxplplusu/bus.h deleted file mode 100644 index 0269371..0000000 --- a/src/mainboard/aopen/dxplplusu/bus.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef DXPLPLUSU_BUS_H_INCLUDED -#define DXPLPLUSU_BUS_H_INCLUDED - -// These were determined by seeing how coreboot enumerates the various -// PCI (and PCI-like) buses on the board. - -#define PCI_BUS_ROOT 0 -#define PCI_BUS_AGP 1 // AGP -#define PCI_BUS_E7501_HI_B 2 // P64H2#1 -#define PCI_BUS_P64H2_B 3 // P64H2#1 bus B -#define PCI_BUS_P64H2_A 4 // P64H2#1 bus A -#define PCI_BUS_ICH4 5 // ICH4 - -// IOAPIC addresses determined by coreboot enumeration. -// Someday add functions to get APIC IDs and versions from the chips themselves. - -#define IOAPIC_ICH4 2 -#define IOAPIC_P64H2_BUS_B 3 // IOAPIC 3 at 02:1c.0 MBAR = fe300000 DataAddr = fe300010 -#define IOAPIC_P64H2_BUS_A 4 // IOAPIC 4 at 02:1e.0 MBAR = fe301000 DataAddr = fe301010 - -#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-4 and P64-H2 - -#endif diff --git a/src/mainboard/aopen/dxplplusu/devicetree.cb b/src/mainboard/aopen/dxplplusu/devicetree.cb deleted file mode 100644 index f43aec8..0000000 --- a/src/mainboard/aopen/dxplplusu/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/e7505 - - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 - device lapic 0 on end - device lapic 6 on end - end - end - - device domain 0 on - device pci 0.0 on end # Chipset host controller - device pci 0.1 on end # Host RASUM controller - device pci 2.0 on # Hub interface B - chip southbridge/intel/i82870 # P64H2 - device pci 1c.0 on end # IOAPIC - bus B - device pci 1d.0 on end # Hub to PCI-B bridge - device pci 1e.0 on end # IOAPIC - bus A - device pci 1f.0 on end # Hub to PCI-A bridge - end - end - device pci 4.0 off end # (undocumented) - device pci 6.0 off end # (undocumented) - chip southbridge/intel/i82801dx - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.7 on end # USB EHCI - device pci 1e.0 on # Hub to PCI bridge - device pci 2.0 off end - end - device pci 1f.0 on # LPC bridge - chip superio/smsc/lpc47m10x - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.a on # ACPI - io 0x60 = 0x0e00 - end - end - end - device pci 1f.1 on end # IDE - register "ide0_enable" = "1" - register "ide1_enable" = "1" - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC97 Audio - device pci 1f.6 off end # AC97 Modem - end # SB - end # PCI domain -end diff --git a/src/mainboard/aopen/dxplplusu/dsdt.asl b/src/mainboard/aopen/dxplplusu/dsdt.asl deleted file mode 100644 index 6c43dd5..0000000 --- a/src/mainboard/aopen/dxplplusu/dsdt.asl +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/ioapic.h> - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x04, // DSDT revision: ACPI v4.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20111103 // OEM revision -) { - -Scope(_SB) -{ - Device(PCI0) { - Name (_HID, EISAID("PNP0A03")) - Name (_ADR, 0x00) - Name (_PRT, Package() { - Package() { 0x001dffff, 0, 0, 16 }, - Package() { 0x001dffff, 1, 0, 19 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 23 }, - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 17 }, - }) - - #include "acpi/e7505_sec.asl" - - OperationRegion (I750, PCI_Config, 0x00, 0x0100) - Field (I750, ByteAcc, NoLock, Preserve) - { - Offset (0xC4), - TOLM, 16, /* Top of Low Memory */ - RBAR, 16, /* REMAP_BASE */ - RLAR, 16 /* REMAP_LIMIT */ - } - } - - #include "acpi/e7505_pri.asl" - - - Device (PWBT) - { - Name (_HID, EisaId ("PNP0C0C")) - Name (_PRW, Package () { 0x08, 0x05 }) - } - - Device (SLBT) - { - Name (_HID, EisaId ("PNP0C0E")) - Name (_PRW, Package () { 0x0B, 0x05 }) - } - - Device (LID0) - { - Name (_HID, EisaId ("PNP0C0D")) - Name (_PRW, Package () { 0x0B, 0x05 }) - } - -} - -Scope(_SB.PCI0) -{ - - Device(PCI1) - { - Name (_ADR, 0x00010000) - Name (_PRT, Package() { - Package() { 0x0000ffff, 0, 0, 16 }, - Package() { 0x0000ffff, 1, 0, 17 }, - }) - } - - Device(HLIB) - { - Name (_ADR, 0x00020000) - Name (_PRT, Package() { - Package() { 0x001dffff, 0, 0, 18 }, - Package() { 0x001dffff, 1, 0, 18 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 18 }, - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 18 }, - Package() { 0x001fffff, 2, 0, 18 }, - Package() { 0x001fffff, 3, 0, 18 }, - }) - - #include "acpi/p64h2.asl" - } - - #include "acpi/i82801db.asl" -} - -#include "acpi/power.asl" - -} diff --git a/src/mainboard/aopen/dxplplusu/fadt.c b/src/mainboard/aopen/dxplplusu/fadt.c deleted file mode 100644 index 9707b9d..0000000 --- a/src/mainboard/aopen/dxplplusu/fadt.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> - -/* FIXME: This needs to go into a separate .h file - * to be included by the ich7 smi handler, ich7 smi init - * code and the mainboard fadt. - */ -#define APM_CNT 0x0 /* ACPI mode only */ -#define CST_CONTROL 0x85 -#define PST_CONTROL 0x0 -#define ACPI_DISABLE 0xAA -#define ACPI_ENABLE 0x55 -#define S4_BIOS 0x77 -#define GNVS_UPDATE 0xea - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 4; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = 0; /* PM_MOBILE; */ - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = ACPI_ENABLE; - fadt->acpi_disable = ACPI_DISABLE; - fadt->s4bios_req = S4_BIOS; - fadt->pstate_cnt = PST_CONTROL; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = 0x0; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x28; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0) - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; /* CST_CONTROL; */ - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 85; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = 0x03; - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x28; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/aopen/dxplplusu/irq_tables.c b/src/mainboard/aopen/dxplplusu/irq_tables.c deleted file mode 100644 index a59d7e8..0000000 --- a/src/mainboard/aopen/dxplplusu/irq_tables.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include "bus.h" - -#define UNUSED_INTERRUPT {0, 0} -#define PIRQ_A 0x60 -#define PIRQ_B 0x61 -#define PIRQ_C 0x62 -#define PIRQ_D 0x63 -#define PIRQ_E 0x68 -#define PIRQ_F 0x69 -#define PIRQ_G 0x6A -#define PIRQ_H 0x6B - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, // Size of this struct in bytes - 0, // PCI bus number on which the interrupt router resides - PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router - 0, // PCI-exclusive IRQ bitmap - PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router - PCI_DEVICE_ID_INTEL_82801DB_LPC, // Device ID of compatible PCI interrupt router - 0, // Additional miniport information - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero - 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0) - { - // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space - // This was determined from linux-2.6.11/arch/i386/pci/irq.c - // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15 - // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13 - // Not sure why IRQ9 isn't routable (inherited from Tyan S2735) - - // INTA# INTB# INTC# INTD# - // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu - - {PCI_BUS_ROOT, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus - {PCI_BUS_ROOT, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // USB 1.1 - - {PCI_BUS_P64H2_B, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, - {PCI_BUS_P64H2_B, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, - {PCI_BUS_P64H2_B, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // GbE - - {PCI_BUS_P64H2_A, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, - {PCI_BUS_P64H2_A, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, - {PCI_BUS_P64H2_A, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // SCSI - - {PCI_BUS_ICH4, PCI_DEVFN(3, 0), {{PIRQ_E, 0xdcf8}, {PIRQ_F, 0xdcf8}, {PIRQ_G, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // 32-bit slot - - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c deleted file mode 100644 index 86470b3..0000000 --- a/src/mainboard/aopen/dxplplusu/romstage.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Kyösti Mälkki kyosti.malkki@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <arch/cpu.h> -#include <stdlib.h> -#include <console/console.h> -#include <cpu/x86/bist.h> - -#include "southbridge/intel/i82801dx/i82801dx.h" -#include "northbridge/intel/e7505/raminit.h" - -#include <device/pnp_def.h> -#include "superio/smsc/lpc47m10x/early_serial.c" - - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47M10X2_SP1) - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - { - .d0 = PCI_DEV(0, 0, 0), - .d0f1 = PCI_DEV(0, 0, 1), - .channel0 = { 0x50, 0x52, 0, 0 }, - .channel1 = { 0x51, 0x53, 0, 0 }, - }, - }; - - // Get the serial port running and print a welcome banner - lpc47m10x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - // Halt if there was a built in self test failure - report_bist_failure(bist); - - // If this is a warm boot, some initialization can be skipped - if (!e7505_mch_is_ready()) { - enable_smbus(); - - /* The real MCH initialisation. */ - e7505_mch_init(memctrl); - - /* - * ECC scrub invalidates cache, so all stack in CAR - * is lost. Only return addresses from main() and - * scrub_ecc() are recovered to stack via xmm0-xmm3. - */ -#if CONFIG_HW_SCRUBBER -#if !CONFIG_USBDEBUG_IN_ROMSTAGE - unsigned long ret_addr = (unsigned long)((unsigned long*)&bist - 1); - e7505_mch_scrub_ecc(ret_addr); -#endif -#endif - - /* Hook for post ECC scrub settings and debug. */ - e7505_mch_done(memctrl); - } - - printk(BIOS_DEBUG, "SDRAM is up.\n"); -} diff --git a/src/mainboard/apple/Kconfig b/src/mainboard/apple/Kconfig index 7d3e8c2..d9b45ae 100644 --- a/src/mainboard/apple/Kconfig +++ b/src/mainboard/apple/Kconfig @@ -3,20 +3,20 @@ if VENDOR_APPLE choice prompt "Mainboard model"
-config BOARD_APPLE_MACBOOK11 +config BOARD_APPLE_MACBOOK1_1 bool "Macbook1,1" help Consult wiki for details.
-config BOARD_APPLE_MACBOOK21 +config BOARD_APPLE_MACBOOK2_1 bool "Macbook2,1" help Consult wiki for details.
endchoice
-source "src/mainboard/apple/macbook11/Kconfig" -source "src/mainboard/apple/macbook21/Kconfig" +source "src/mainboard/apple/macbook1_1/Kconfig" +source "src/mainboard/apple/macbook2_1/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/apple/macbook11/Kconfig b/src/mainboard/apple/macbook11/Kconfig deleted file mode 100644 index ebf5dfe..0000000 --- a/src/mainboard/apple/macbook11/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -if BOARD_APPLE_MACBOOK11 - -config MAINBOARD_PART_NUMBER - string - default "MacBook1,1" - -endif diff --git a/src/mainboard/apple/macbook11/board_info.txt b/src/mainboard/apple/macbook11/board_info.txt deleted file mode 100644 index 51c9161..0000000 --- a/src/mainboard/apple/macbook11/board_info.txt +++ /dev/null @@ -1,8 +0,0 @@ -Board name: Macbook1,1 -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n -Clone of: apple/macbook21 - diff --git a/src/mainboard/apple/macbook1_1/Kconfig b/src/mainboard/apple/macbook1_1/Kconfig new file mode 100644 index 0000000..bf846e7 --- /dev/null +++ b/src/mainboard/apple/macbook1_1/Kconfig @@ -0,0 +1,7 @@ +if BOARD_APPLE_MACBOOK1_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBook1,1" + +endif diff --git a/src/mainboard/apple/macbook1_1/board_info.txt b/src/mainboard/apple/macbook1_1/board_info.txt new file mode 100644 index 0000000..fe7e239 --- /dev/null +++ b/src/mainboard/apple/macbook1_1/board_info.txt @@ -0,0 +1,8 @@ +Board name: Macbook1,1 +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n +Clone of: apple/macbook2_1 + diff --git a/src/mainboard/apple/macbook21/Kconfig b/src/mainboard/apple/macbook21/Kconfig deleted file mode 100644 index 1a491ec..0000000 --- a/src/mainboard/apple/macbook21/Kconfig +++ /dev/null @@ -1,64 +0,0 @@ -if BOARD_APPLE_MACBOOK11 || BOARD_APPLE_MACBOOK21 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select ARCH_X86 - select CPU_INTEL_SOCKET_MFCPGA478 - select NORTHBRIDGE_INTEL_I945 - select NORTHBRIDGE_INTEL_SUBTYPE_I945GM - select SOUTHBRIDGE_INTEL_I82801GX - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_2048 - select CHANNEL_XOR_RANDOMIZATION - select INTEL_INT15 - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select USE_OPTION_TABLE - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select VGA - select MAINBOARD_DO_EDID - select EARLY_CBMEM_INIT - select INTEL_EDID - -config MAINBOARD_DIR - string - default apple/macbook21 - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -if BOARD_APPLE_MACBOOK21 - -config MAINBOARD_PART_NUMBER - string - default "MacBook2,1" - -endif - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 2 - -config MAINBOARD_SMBIOS_MANUFACTURER - string - default "Apple Inc." - -endif diff --git a/src/mainboard/apple/macbook21/acpi/ec.asl b/src/mainboard/apple/macbook21/acpi/ec.asl deleted file mode 100644 index dc248b4..0000000 --- a/src/mainboard/apple/macbook21/acpi/ec.asl +++ /dev/null @@ -1,232 +0,0 @@ -Device(EC) -{ - Name(_HID, EISAID("PNP0C09")) - Name(_UID, 0) - - Name(_GPE, 0x17) - Mutex(ECLK, 0) - - OperationRegion(ERAM, EmbeddedControl, 0x00, 0x100) - Field(ERAM, ByteAcc, NoLock, Preserve) - { - Offset(0x01), - LIDS, 1, /* Lid status */ - HPAC, 1, - Offset(0x02), - WKLD, 1, /* Lid wake */ - - Offset(0x20), - SPTR, 8, - SSTS, 8, - SADR, 8, - SCMD, 8, - SBFR, 256, - } - Field(ERAM, ByteAcc, Lock, Preserve) - { - Offset(0x24), - SBDW, 16, - } - - Method(SBPC, 0, NotSerialized) - { - Store(1000, Local0) - While(Local0) - { - If(LEqual(SPTR, 0x00)) - { - Return() - } - - Sleep(1) - Decrement(Local0) - } - } - - Method(SBRW, 2, NotSerialized) - { - Acquire(ECLK, 0xFFFF) - Store(ShiftLeft(Arg0, 0x01), SADR) - Store(Arg1, SCMD) - Store(0x09, SPTR) - SBPC() - Store(SBDW, Local0) - Release(ECLK) - Return(Local0) - } - - Method(SBRB, 2, NotSerialized) - { - Acquire(ECLK, 0xFFFF) - Store(ShiftLeft(Arg0, 0x01), SADR) - Store(Arg1, SCMD) - Store(0x0B, SPTR) - SBPC() - Store(SBFR, Local0) - Release(ECLK) - Return(Local0) - } - - /* LID status change. */ - Method(_Q20, 0, NotSerialized) - { - Notify(LID, 0x80) - } - - /* AC status change. */ - Method(_Q21, 0, NotSerialized) - { - Notify(AC, 0x80) - } - - Method(_CRS, 0) - { - Name(ECMD, ResourceTemplate() - { - IO(Decode16, 0x62, 0x62, 1, 1) - IO(Decode16, 0x66, 0x66, 1, 1) - }) - Return(ECMD) - } - - Method(_INI, 0, NotSerialized) - { - } - - Device(LID) - { - Name(_HID, "PNP0C0D") - - Method(_LID, 0, NotSerialized) - { - return(LIDS) - } - - Method(_PRW, 0, NotSerialized) - { - Return (Package() { 0x1d, 0x03 }) - } - - Method(_PSW, 1, NotSerialized) - { - if (Arg0) { - Store(1, WKLD) - } else { - Store(0, WKLD) - } - } - } - - Device(AC) - { - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_PSR, 0, NotSerialized) - { - return(HPAC) - } - - Method(_STA, 0, NotSerialized) - { - Return(0x0f) - } - } - - Device(BAT0) - { - Name(_HID, EisaId("PNP0C0A")) - Name(_UID, 0x00) - Name(_PCL, Package() { _SB }) - - Name(BATS, Package() - { - 0x00, // 0: PowerUnit: Report in mWh - 0xFFFFFFFF, // 1: Design cap - 0xFFFFFFFF, // 2: Last full charge cap - 0x01, // 3: Battery Technology - 10800, // 4: Design Voltage(mV) - 0x00, // 5: Warning design capacity - 200, // 6: Low design capacity - 10, // 7: granularity1 - 10, // 8: granularity2 - "", // 9: Model number - "", // A: Serial number - "", // B: Battery Type - "" // C: OEM information - }) - - Name(BATI, Package() - { - 0, // Battery State - // Bit 0 - discharge - // Bit 1 - charge - // Bit 2 - critical state - 0, // Battery present Rate - 0, // Battery remaining capacity - 0 // Battery present voltage - }) - - Method(_BIF, 0, NotSerialized) - { - Multiply(^^SBRW(0x0B, 0x18), 10, Index(BATS, 0x01)) - Multiply(^^SBRW(0x0B, 0x10), 10, Index(BATS, 0x02)) - Store(^^SBRW(0x0B, 0x19), Index(BATS, 0x04)) - Store(^^SBRB(0x0B, 0x21), Index(BATS, 0x09)) - Store(^^SBRB(0x0B, 0x22), Index(BATS, 0x0B)) - Store(^^SBRB(0x0B, 0x20), Index(BATS, 0x0C)) - - Return(BATS) - } - - Method(_STA, 0, NotSerialized) - { - If(And(^^SBRW(0x0A, 0x01), 0x01)) { - Return(0x1f) - } else { - Return(0x0f) - } - } - - Method(_BST, 0, NotSerialized) - { - /* Check for battery presence. */ - If(LNot(And(^^SBRW(0x0A, 0x01), 0x01))) { - Return(Package(4) { - 0, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF - }) - } - Store(^^SBRW(0x0B, 0x09), Local1) - Store(Local1, Index(BATI, 0x03)) - Store(^^SBRW(0x0B, 0x0A), Local0) - /* Sign-extend Local0. */ - If(And(Local0, 0x8000)) - { - Not(Local0, Local0) - And(Increment(Local0), 0xFFFF, Local0) - } - - Multiply(Local0, Local1, Local0) - Divide(Local0, 1000, , Index(BATI, 1)) - Multiply(^^SBRW(0x0B, 0x0F), 10, Index(BATI, 2)) - If(HPAC) - { - If(LNot(And(^^SBRW(0x0B, 0x16), 0x40))) { - Store(2, Index(BATI, 0)) - } Else { - Store(0, Index(BATI, 0)) - } - } - Else - { - Store(0x01, Index(BATI, 0)) - } - - Return(BATI) - } - } -} diff --git a/src/mainboard/apple/macbook21/acpi/i945_pci_irqs.asl b/src/mainboard/apple/macbook21/acpi/i945_pci_irqs.asl deleted file mode 100644 index 6047def..0000000 --- a/src/mainboard/apple/macbook21/acpi/i945_pci_irqs.asl +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * i945 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0001FFFF, 0, 0, 0x10 }, - Package() { 0x0002FFFF, 0, 0, 0x10 }, - Package() { 0x0007FFFF, 0, 0, 0x10 }, - Package() { 0x001BFFFF, 0, 0, 0x16 }, - Package() { 0x001CFFFF, 0, 0, 0x11 }, - Package() { 0x001CFFFF, 1, 0, 0x10 }, - Package() { 0x001CFFFF, 2, 0, 0x12 }, - Package() { 0x001CFFFF, 3, 0, 0x13 }, - Package() { 0x001DFFFF, 0, 0, 0x15 }, - Package() { 0x001DFFFF, 1, 0, 0x13 }, - Package() { 0x001DFFFF, 2, 0, 0x12 }, - Package() { 0x001DFFFF, 3, 0, 0x10 }, - Package() { 0x001EFFFF, 0, 0, 0x16 }, - Package() { 0x001EFFFF, 1, 0, 0x14 }, - Package() { 0x001FFFFF, 0, 0, 0x12 }, - Package() { 0x001FFFFF, 1, 0, 0x13 }, - Package() { 0x001FFFFF, 3, 0, 0x10 } - }) - } Else { - Return (Package() { - Package() { 0x0001FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0002FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0007FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001BFFFF, 0, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001CFFFF, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001CFFFF, 1, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001CFFFF, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001CFFFF, 3, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001DFFFF, 0, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001DFFFF, 1, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001DFFFF, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001DFFFF, 3, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001EFFFF, 0, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001EFFFF, 1, _SB.PCI0.LPCB.LNKE, 0 }, - Package() { 0x001FFFFF, 0, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001FFFFF, 1, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001FFFFF, 3, _SB.PCI0.LPCB.LNKA, 0 } - }) - } -} diff --git a/src/mainboard/apple/macbook21/acpi/ich7_pci_irqs.asl b/src/mainboard/apple/macbook21/acpi/ich7_pci_irqs.asl deleted file mode 100644 index 5354901..0000000 --- a/src/mainboard/apple/macbook21/acpi/ich7_pci_irqs.asl +++ /dev/null @@ -1,74 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH7 - */ - -If (PICM) { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x15 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x17 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x14 }, - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x16 }, - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x14 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x17 }, - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x13 }, - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x16 }, - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x14 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x15 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } - }) - } Else { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKH, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LPCB.LNKE, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LPCB.LNKE, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LPCB.LNKH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKC, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKD, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LPCB.LNKB, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LPCB.LNKA, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LPCB.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LPCB.LNKC, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LPCB.LNKB, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LPCB.LNKE, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } - }) -} diff --git a/src/mainboard/apple/macbook21/acpi/platform.asl b/src/mainboard/apple/macbook21/acpi/platform.asl deleted file mode 100644 index 1c6ac6e..0000000 --- a/src/mainboard/apple/macbook21/acpi/platform.asl +++ /dev/null @@ -1,192 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - Return(Package(){0,0}) -} - -// Power notification - -External (_PR_.CPU0, DeviceObj) -External (_PR_.CPU1, DeviceObj) - -Method (PNOT) -{ - If (MPEN) { - If(And(PDC0, 0x08)) { - Notify (_PR_.CPU0, 0x80) // _PPC - - If (And(PDC0, 0x10)) { - Sleep(100) - Notify(_PR_.CPU0, 0x81) // _CST - } - } - - If(And(PDC1, 0x08)) { - Notify (_PR_.CPU1, 0x80) // _PPC - If (And(PDC1, 0x10)) { - Sleep(100) - Notify(_PR_.CPU1, 0x81) // _CST - } - } - - } Else { // UP - Notify (_PR_.CPU0, 0x80) - Sleep(0x64) - Notify(_PR_.CPU0, 0x81) - } -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - // TRAP(71) // TODO - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - /* Linux answers _OSI with "True" for a couple of - * Windows version queries. But unlike Windows it - * needs a Video repost, so let's determine whether - * we're running Linux. - */ - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - - /* And the OS workarounds start right after we know what we're - * running: Windows XP SP1 needs to have C-State coordination - * enabled in SMM. - */ - If (LAnd(LEqual(OSYS, 2001), MPEN)) { - // TRAP(61) // TODO - } - - /* SMM power state and C4-on-C3 settings need to be updated */ - // TRAP(43) // TODO - } -} - diff --git a/src/mainboard/apple/macbook21/acpi/superio.asl b/src/mainboard/apple/macbook21/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/apple/macbook21/acpi/video.asl b/src/mainboard/apple/macbook21/acpi/video.asl deleted file mode 100644 index c2f9dfb..0000000 --- a/src/mainboard/apple/macbook21/acpi/video.asl +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (DSPC) -{ - Name (_ADR, 0x00020001) - OperationRegion (DSPC, PCI_Config, 0x00, 0x100) - Field (DSPC, ByteAcc, NoLock, Preserve) - { - Offset (0xf4), - BRTC, 8 - } - - Method(BRTD, 0, NotSerialized) - { - Store(BRTC, Local0) - if (LGreater (Local0, 15)) - { - Subtract(Local0, 16, Local0) - Store(Local0, BRTC) - } - } - - Method(BRTU, 0, NotSerialized) - { - Store (BRTC, Local0) - if (LLess(Local0, 0xff)) - { - Add (Local0, 16, Local0) - Store(Local0, BRTC) - } - } -} diff --git a/src/mainboard/apple/macbook21/acpi_tables.c b/src/mainboard/apple/macbook21/acpi_tables.c deleted file mode 100644 index ada7d08..0000000 --- a/src/mainboard/apple/macbook21/acpi_tables.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#include "southbridge/intel/i82801gx/nvs.h" -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - - /* Enable both COM ports */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); - - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/apple/macbook21/board_info.txt b/src/mainboard/apple/macbook21/board_info.txt deleted file mode 100644 index b620278..0000000 --- a/src/mainboard/apple/macbook21/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: Macbook2,1 -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/apple/macbook21/cmos.default b/src/mainboard/apple/macbook21/cmos.default deleted file mode 100644 index 0185e94..0000000 --- a/src/mainboard/apple/macbook21/cmos.default +++ /dev/null @@ -1,21 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -hyper_threading=Enable -nmi=Enable -boot_devices='' -boot_default=0x40 -cmos_defaults_loaded=Yes -lpt=Enable -volume=0x3 -tft_brightness=0xff -first_battery=Primary -bluetooth=Enable -wlan=Enable -wwan=Enable -trackpoint=Enable -fn_ctrl_swap=Disable -sticky_fn=Disable -power_management_beeps=Enable -low_battery_beep=Enable diff --git a/src/mainboard/apple/macbook21/cmos.layout b/src/mainboard/apple/macbook21/cmos.layout deleted file mode 100644 index 469371e..0000000 --- a/src/mainboard/apple/macbook21/cmos.layout +++ /dev/null @@ -1,162 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2008 coresystems GmbH -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 h 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -#409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default -936 1 e 8 cmos_defaults_loaded -937 1 e 1 lpt -#938 46 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ram initialization internal data -1024 8 r 0 C0WL0REOST -1032 8 r 0 C1WL0REOST -1040 8 r 0 RCVENMT -1048 4 r 0 C0DRT1 -1052 4 r 0 C1DRT1 - -1064 8 h 0 volume -1072 8 h 0 tft_brightness -1080 1 e 9 first_battery -1081 1 e 1 bluetooth -1082 1 e 1 wwan -1083 1 e 1 wlan -1084 1 e 1 trackpoint -1085 1 e 1 fn_ctrl_swap -1086 1 e 1 sticky_fn -1087 1 e 1 power_management_beeps -1088 1 e 1 low_battery_beep -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 No -8 1 Yes -9 0 Secondary -9 1 Primary - -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 - - diff --git a/src/mainboard/apple/macbook21/devicetree.cb b/src/mainboard/apple/macbook21/devicetree.cb deleted file mode 100644 index a3dfe3a..0000000 --- a/src/mainboard/apple/macbook21/devicetree.cb +++ /dev/null @@ -1,107 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/i945 - - register "gpu_hotplug" = "0x00000220" - register "gpu_lvds_use_spread_spectrum_clock" = "1" - register "gpu_lvds_is_dual_channel" = "0" - register "gpu_backlight" = "0x1280128" - - device cpu_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x8086 0x7270 - end - device pci 02.0 on # VGA controller - subsystemid 0x8086 0x7270 - end - device pci 02.1 on # display controller - subsystemid 0x17aa 0x201a - end - chip southbridge/intel/i82801gx - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi1_routing" = "2" - register "gpi7_routing" = "2" - - register "sata_ahci" = "0x1" - register "sata_ports_implemented" = "0x04" - - register "gpe0_en" = "0x11000006" - register "alt_gp_smi_en" = "0x1000" - - register "ide_enable_primary" = "1" - register "ide_enable_secondary" = "1" - - register "c4onc3_enable" = "1" - device pci 1b.0 on # Audio Controller - subsystemid 0x8384 0x7680 - end - device pci 1c.0 on end # Ethernet - device pci 1c.1 on end # Atheros WLAN - device pci 1d.0 on # USB UHCI - subsystemid 0x8086 0x7270 - end - device pci 1d.1 on # USB UHCI - subsystemid 0x8086 0x7270 - end - device pci 1d.2 on # USB UHCI - subsystemid 0x8086 0x7270 - end - device pci 1d.3 on # USB UHCI - subsystemid 0x8086 0x7270 - end - device pci 1d.7 on # USB2 EHCI - subsystemid 0x8086 0x7270 - end - device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x8086 0x7270 - end - device pci 1f.1 on # IDE - subsystemid 0x8086 0x7270 - end - device pci 1f.2 on # SATA - subsystemid 0x8086 0x7270 - end - device pci 1f.3 on # SMBUS - subsystemid 0x8086 0x7270 - end - end - end -end diff --git a/src/mainboard/apple/macbook21/dsdt.asl b/src/mainboard/apple/macbook21/dsdt.asl deleted file mode 100644 index fb0a34f..0000000 --- a/src/mainboard/apple/macbook21/dsdt.asl +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define BRIGHTNESS_UP \DSPC.BRTU -#define BRIGHTNESS_DOWN \DSPC.BRTD -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, // DSDT revision: ACPI v3.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/i945/acpi/i945.asl> - #include <southbridge/intel/i82801gx/acpi/ich7.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> -} diff --git a/src/mainboard/apple/macbook21/fadt.c b/src/mainboard/apple/macbook21/fadt.c deleted file mode 100644 index 314153d..0000000 --- a/src/mainboard/apple/macbook21/fadt.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/acpi.h> - -void mainboard_fill_fadt(acpi_fadt_t * fadt) -{ - fadt->p_lvl3_lat = 0x23; -} diff --git a/src/mainboard/apple/macbook21/hda_verb.c b/src/mainboard/apple/macbook21/hda_verb.c deleted file mode 100644 index 1fe188e..0000000 --- a/src/mainboard/apple/macbook21/hda_verb.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Vladimir Serbinenko. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License, - * or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x83847680, /* Codec Vendor / Device ID: SigmaTel STAC9221 A1 */ - 0x106b2200, /* Subsystem ID */ - 0x0000000B, /* Number of 4 dword sets */ - - /* NID 0x01: Subsystem ID. */ - AZALIA_SUBVENDOR(0x0, 0x106B2200), - - /* NID 0x0A. */ - AZALIA_PIN_CFG(0x0, 0x0A, 0x0321E21F), - - /* NID 0x0B. */ - AZALIA_PIN_CFG(0x0, 0x0B, 0x03A1E02E), - - /* NID 0x0C. */ - AZALIA_PIN_CFG(0x0, 0x0C, 0x9017E110), - - /* NID 0x0D. */ - AZALIA_PIN_CFG(0x0, 0x0D, 0x9017E11F), - - /* NID 0x0E. */ - AZALIA_PIN_CFG(0x0, 0x0E, 0x400000FE), - - /* NID 0x0F */ - AZALIA_PIN_CFG(0x0, 0x0F, 0x0381E020), - - /* NID 0x10 */ - AZALIA_PIN_CFG(0x0, 0x10, 0x1345E230), - - /* NID 0x11 */ - AZALIA_PIN_CFG(0x0, 0x11, 0x13C5E240), - - /* NID 0x15 */ - AZALIA_PIN_CFG(0x0, 0x15, 0x400000FC), - - /* NID 0x1B. */ - AZALIA_PIN_CFG(0x0, 0x1B, 0x400000FB), - -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbook21/irq_tables.c b/src/mainboard/apple/macbook21/irq_tables.c deleted file mode 100644 index 8991d7f..0000000 --- a/src/mainboard/apple/macbook21/irq_tables.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 15, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf5, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ - {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ - {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ - {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ - {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ - {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ - {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ - {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ - {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ - {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ - {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ - {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ - {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ - {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/apple/macbook21/mainboard.c b/src/mainboard/apple/macbook21/mainboard.c deleted file mode 100644 index 99527c1..0000000 --- a/src/mainboard/apple/macbook21/mainboard.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <northbridge/intel/i945/i945.h> -#include <pc80/mc146818rtc.h> -#include <arch/x86/include/arch/acpigen.h> -#include <smbios.h> -#include <drivers/intel/gma/int15.h> -#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT - -int get_cst_entries(acpi_cstate_t **entries) -{ - return 0; -} - -static void mainboard_init(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); -} - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; - diff --git a/src/mainboard/apple/macbook21/mptable.c b/src/mainboard/apple/macbook21/mptable.c deleted file mode 100644 index cc97e52..0000000 --- a/src/mainboard/apple/macbook21/mptable.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); - - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x16); /* HD Audio 0:1b.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x11); /* PCIe 0:1c.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x10); /* PCIe 0:1c.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x12); /* PCIe 0:1c.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x13); /* PCIe 0:1c.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x15); /* USB 0:1d.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x13); /* USB 0:1d.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x10); /* USB 0:1d.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x12); /* LPC 0:1f.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x13); /* IDE 0:1f.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x03, 0x02, 0x10); /* SATA 0:1f.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x03, (0x03 << 2) , 0x02, 0x13); /* Firewire 3:03.0 */ - - mptable_lintsrc(mc, isa_bus); - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c deleted file mode 100644 index e7ff902..0000000 --- a/src/mainboard/apple/macbook21/romstage.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// __PRE_RAM__ means: use "unsigned" for device, not a struct. - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <cbmem.h> -#include <timestamp.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include "northbridge/intel/i945/i945.h" -#include "northbridge/intel/i945/raminit.h" -#include "southbridge/intel/i82801gx/i82801gx.h" - -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* X60 GPIO: - * 1: HDD_PRESENCE# - * 6: Unknown (Pulled high by R215 to VCC3B) - * 7: BDC_PRESENCE# - * 8: H8_WAKE# - * 9: RTC_BAT_IN# - * 10: Unknown (Pulled high by R700 to VCC3M) - * 12: H8SCI# - * 13: SLICE_ON_3M# - * 14: Unknown (Pulled high by R321 to VCC3) - * 15: Unknown (Pulled high by R258 to VCC3) - * 19: Unknown (Pulled low by R594) - * 21: Unknown (Pulled high by R145 to VCC3) - * 22: FWH_WP# - * 25: MDC_KILL# - * 33: HDD_PRESENCE_2# - * 35: CLKREQ_SATA# - * 36: PLANARID0 - * 37: PLANARID1 - * 38: PLANARID2 - * 39: PLANARID3 - * 48: FWH_TBL# - */ - - outl(0x1f40f7e2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfcc06bdf, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -} - -static void ich7_enable_lpc(void) -{ - // Enable Serial IRQ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); - - // I/O Decode Ranges - // X60: 0x0210 == 00000010 00010000 - // Macbook21: 0x0010 == 00000000 00010000 - // Bit 9:8 LPT Decode Range. This field determines which range to - // decode for the LPT Port. - // 00 = 378h  37Fh and 778h  77Fh - // 10 = 3BCh  3BEh and 7BCh  7BEh - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); - - // LPC_EN--LPC I/F Enables Register - // X60: 0x1f0d == 00011111 00001101 - // Macbook21: 0x3807 == 00111000 00000111 - // Bit 13 CNF2_LPC_EN -- R/W. Microcontroller Enable # 2. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 4Eh and 4Fh - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 12 CNF1_LPC_EN -- R/W. Super I/O Enable. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 2Eh and 2Fh - // to the LPC interface. This range is used for - // Super I/O devices. - // Bit 11 MC_LPC_EN -- R/W. Microcontroller Enable # 1. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 62h and 66h - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 10 KBC_LPC_EN -- R/W. Keyboard Enable. - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 60h and 64h - // to the LPC interface. This range is used for a - // microcontroller. - // Bit 9 GAMEH_LPC_EN -- R/W. High Gameport Enable - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 208h to 20Fh - // to the LPC interface. This range is used for a gameport. - // Bit 8 GAMEL_LPC_EN -- R/W. Low Gameport Enable - // 0 = Disable. - // 1 = Enables the decoding of the I/O locations 200h to 207h - // to the LPC interface. This range is used for a gameport. - // Bit 3 FDD_LPC_EN -- R/W. Floppy Drive Enable - // 0 = Disable. - // 1 = Enables the decoding of the FDD range to the LPC - // interface. This range is selected in the LPC_FDD/LPT - // Decode Range Register (D31:F0:80h, bit 12). - // Bit 2 LPT_LPC_EN -- R/W. Parallel Port Enable - // 0 = Disable. - // 1 = Enables the decoding of the LPT range to the LPC - // interface. This range is selected in the LPC_FDD/LPT - // Decode Range Register (D31:F0:80h, bit 9:8). - // Bit 1 COMB_LPC_EN -- R/W. Com Port B Enable - // 0 = Disable. - // 1 = Enables the decoding of the COMB range to the LPC - // interface. This range is selected in the LPC_COM Decode - // Range Register (D31:F0:80h, bits 6:4). - // Bit 0 COMA_LPC_EN -- R/W. Com Port A Enable - // 0 = Disable. - // 1 = Enables the decoding of the COMA range to the LPC - // interface. This range is selected in the LPC_COM Decode - // Range Register (D31:F0:80h, bits 3:2). - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3807); - - /* GEN1_DEC, LPC Interface Generic Decode Range 1 */ - // X60: 0x1601 0x007c == 00000000 01111100 00010110 00000001 - // Macbook21: 0x0681 0x000c == 00000000 00001100 00000110 10000001 - // Bit 31:24 Reserved. - // Bit 23:18 Generic I/O Decode Range Address[7:2] Mask: A `1' in any - // bit position indicates that any value in the corresponding - // address bit in a received cycle will be treated as a - // match. The corresponding bit in the Address field, below, - // is ignored. The mask is only provided for the lower 6 bits - // of the DWord address, allowing for decoding blocks up to - // 256 bytes in size. - // Bit 17:16 Reserved. - // Bit 15:2 Generic I/O Decode Range 1 Base Address (GEN1_BASE). This - // address is aligned on a 128-byte boundary, and must have - // address lines 31:16 as 0. NOTE: The Intel ICH7 does not - // provide decode down to the word or byte level. - // Bit 1 Reserved. - // Bit 0 Generic Decode Range 1 Enable (GEN1_EN) -- R/W. - // 0 = Disable. - // 1 = Enable the GEN1 I/O range to be forwarded to the LPC - // I/F - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0681); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x000c); - - /* GEN2_DEC, LPC Interface Generic Decode Range 2 */ - // X60: 0x15e1 0x000c == 00000000 00001100 00010101 11100001 - // Macbook21: 0x1641 0x000c == 00000000 00001100 00010110 01000001 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x1641); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); - - /* GEN3_DEC, LPC Interface Generic Decode Range 3 */ - // X60: 0x1681 0x001c == 00000000 00011100 00010110 10000001 - // Macbook21: 0x0000 0x0000 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x0000); // obsolete, because it writes zeros? - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x0000); - - /* GEN4_DEC, LPC Interface Generic Decode Range 4 */ - // X60: 0x0000 0x0000 - // Macbook21: 0x0301 0x001c == 00000000 00011100 00000011 00000001 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x90, 0x0301); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x92, 0x001c); -} - -static void rcba_config(void) -{ - /* V0CTL Virtual Channel 0 Resource Control */ - RCBA32(0x0014) = 0x80000001; - /* V1CAP Virtual Channel 1 Resource Capability */ - RCBA32(0x001c) = 0x03128010; - - /* Device 1f interrupt pin register */ - RCBA32(0x3100) = 0x00042210; - RCBA32(0x3108) = 0x10004321; - - /* PCIe Interrupts */ - RCBA32(0x310c) = 0x00214321; - /* HD Audio Interrupt */ - RCBA32(0x3110) = 0x00000001; - - /* dev irq route register */ - RCBA16(0x3140) = 0x0232; - RCBA16(0x3142) = 0x3246; - RCBA16(0x3144) = 0x0235; - RCBA16(0x3146) = 0x3201; - RCBA16(0x3148) = 0x3216; - - /* Enable IOAPIC */ - RCBA8(0x31ff) = 0x03; - - /* Enable upper 128bytes of CMOS */ - RCBA32(0x3400) = (1 << 2); - - /* Disable unused devices */ - RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_PCIE4 | FD_PCIE3 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. - - /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ - // RCBA32(0x1e84) = 0x00020001; - // RCBA32(0x1e80) = 0x0000fe01; - - /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ - RCBA32(0x1e9c) = 0x000200f0; - RCBA32(0x1e98) = 0x000c0801; -} - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - RCBA32(0x0088) = 0x0011d000; - RCBA16(0x01fc) = 0x060f; - RCBA32(0x01f4) = 0x86000040; - RCBA32(0x0214) = 0x10030549; - RCBA32(0x0218) = 0x00020504; - RCBA8(0x0220) = 0xc5; - reg32 = RCBA32(0x3410); - reg32 |= (1 << 6); - RCBA32(0x3410) = reg32; - reg32 = RCBA32(0x3430); - reg32 &= ~(3 << 0); - reg32 |= (1 << 0); - RCBA32(0x3430) = reg32; - RCBA32(0x3418) |= (1 << 0); - RCBA16(0x0200) = 0x2008; - RCBA8(0x2027) = 0x0d; - RCBA16(0x3e08) |= (1 << 7); - RCBA16(0x3e48) |= (1 << 7); - RCBA32(0x3e0e) |= (1 << 7); - RCBA32(0x3e4e) |= (1 << 7); - - // next step only on ich7m b0 and later: - reg32 = RCBA32(0x2034); - reg32 &= ~(0x0f << 16); - reg32 |= (5 << 16); - RCBA32(0x2034) = reg32; -} - -void main(unsigned long bist) -{ - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; - const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x51, 0x52, 0x53 }; - - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - /* Force PCIRST# */ - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); - udelay(200 * 1000); - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); - - ich7_enable_lpc(); - - /* Set up the console */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, - "Soft reset detected, rebooting properly.\n"); - outb(0x6, 0xcf9); - while (1) - asm("hlt"); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - i945_early_initialization(); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - -#else - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); -#endif - } - - /* Enable SPD ROMs and DDR-II DRAM */ - enable_smbus(); - -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 - dump_spd_registers(); -#endif - - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); - timestamp_add_now(TS_AFTER_INITRAM); - - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - /* Chipset Errata! */ - fixup_i945_errata(); - - /* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - -#if !CONFIG_HAVE_ACPI_RESUME -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 -#if CONFIG_DEBUG_RAM_SETUP - sdram_dump_mchbar_registers(); - - { - /* This will not work if TSEG is in place! */ - u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); - - printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); - ram_check(0x00000000, 0x000a0000); - ram_check(0x00100000, tom); - } -#endif -#endif -#endif - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, - SKPAD_ACPI_S3_MAGIC); - } -#endif - - timestamp_add_now(TS_END_ROMSTAGE); - -} diff --git a/src/mainboard/apple/macbook21/smihandler.c b/src/mainboard/apple/macbook21/smihandler.c deleted file mode 100644 index ab039dd..0000000 --- a/src/mainboard/apple/macbook21/smihandler.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/i82801gx/nvs.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include <pc80/mc146818rtc.h> -#include <delay.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); - - if (!pmbase) - return 0; - - switch(data) { - case APM_CNT_ACPI_ENABLE: - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - case APM_CNT_ACPI_DISABLE: - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - default: - break; - } - return 0; -} diff --git a/src/mainboard/apple/macbook2_1/Kconfig b/src/mainboard/apple/macbook2_1/Kconfig new file mode 100644 index 0000000..2df1503 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/Kconfig @@ -0,0 +1,64 @@ +if BOARD_APPLE_MACBOOK1_1 || BOARD_APPLE_MACBOOK2_1 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select ARCH_X86 + select CPU_INTEL_SOCKET_MFCPGA478 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GM + select SOUTHBRIDGE_INTEL_I82801GX + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_2048 + select CHANNEL_XOR_RANDOMIZATION + select INTEL_INT15 + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select USE_OPTION_TABLE + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select VGA + select MAINBOARD_DO_EDID + select EARLY_CBMEM_INIT + select INTEL_EDID + +config MAINBOARD_DIR + string + default apple/macbook2_1 + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +if BOARD_APPLE_MACBOOK2_1 + +config MAINBOARD_PART_NUMBER + string + default "MacBook2,1" + +endif + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 2 + +config MAINBOARD_SMBIOS_MANUFACTURER + string + default "Apple Inc." + +endif diff --git a/src/mainboard/apple/macbook2_1/acpi/ec.asl b/src/mainboard/apple/macbook2_1/acpi/ec.asl new file mode 100644 index 0000000..dc248b4 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi/ec.asl @@ -0,0 +1,232 @@ +Device(EC) +{ + Name(_HID, EISAID("PNP0C09")) + Name(_UID, 0) + + Name(_GPE, 0x17) + Mutex(ECLK, 0) + + OperationRegion(ERAM, EmbeddedControl, 0x00, 0x100) + Field(ERAM, ByteAcc, NoLock, Preserve) + { + Offset(0x01), + LIDS, 1, /* Lid status */ + HPAC, 1, + Offset(0x02), + WKLD, 1, /* Lid wake */ + + Offset(0x20), + SPTR, 8, + SSTS, 8, + SADR, 8, + SCMD, 8, + SBFR, 256, + } + Field(ERAM, ByteAcc, Lock, Preserve) + { + Offset(0x24), + SBDW, 16, + } + + Method(SBPC, 0, NotSerialized) + { + Store(1000, Local0) + While(Local0) + { + If(LEqual(SPTR, 0x00)) + { + Return() + } + + Sleep(1) + Decrement(Local0) + } + } + + Method(SBRW, 2, NotSerialized) + { + Acquire(ECLK, 0xFFFF) + Store(ShiftLeft(Arg0, 0x01), SADR) + Store(Arg1, SCMD) + Store(0x09, SPTR) + SBPC() + Store(SBDW, Local0) + Release(ECLK) + Return(Local0) + } + + Method(SBRB, 2, NotSerialized) + { + Acquire(ECLK, 0xFFFF) + Store(ShiftLeft(Arg0, 0x01), SADR) + Store(Arg1, SCMD) + Store(0x0B, SPTR) + SBPC() + Store(SBFR, Local0) + Release(ECLK) + Return(Local0) + } + + /* LID status change. */ + Method(_Q20, 0, NotSerialized) + { + Notify(LID, 0x80) + } + + /* AC status change. */ + Method(_Q21, 0, NotSerialized) + { + Notify(AC, 0x80) + } + + Method(_CRS, 0) + { + Name(ECMD, ResourceTemplate() + { + IO(Decode16, 0x62, 0x62, 1, 1) + IO(Decode16, 0x66, 0x66, 1, 1) + }) + Return(ECMD) + } + + Method(_INI, 0, NotSerialized) + { + } + + Device(LID) + { + Name(_HID, "PNP0C0D") + + Method(_LID, 0, NotSerialized) + { + return(LIDS) + } + + Method(_PRW, 0, NotSerialized) + { + Return (Package() { 0x1d, 0x03 }) + } + + Method(_PSW, 1, NotSerialized) + { + if (Arg0) { + Store(1, WKLD) + } else { + Store(0, WKLD) + } + } + } + + Device(AC) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_PSR, 0, NotSerialized) + { + return(HPAC) + } + + Method(_STA, 0, NotSerialized) + { + Return(0x0f) + } + } + + Device(BAT0) + { + Name(_HID, EisaId("PNP0C0A")) + Name(_UID, 0x00) + Name(_PCL, Package() { _SB }) + + Name(BATS, Package() + { + 0x00, // 0: PowerUnit: Report in mWh + 0xFFFFFFFF, // 1: Design cap + 0xFFFFFFFF, // 2: Last full charge cap + 0x01, // 3: Battery Technology + 10800, // 4: Design Voltage(mV) + 0x00, // 5: Warning design capacity + 200, // 6: Low design capacity + 10, // 7: granularity1 + 10, // 8: granularity2 + "", // 9: Model number + "", // A: Serial number + "", // B: Battery Type + "" // C: OEM information + }) + + Name(BATI, Package() + { + 0, // Battery State + // Bit 0 - discharge + // Bit 1 - charge + // Bit 2 - critical state + 0, // Battery present Rate + 0, // Battery remaining capacity + 0 // Battery present voltage + }) + + Method(_BIF, 0, NotSerialized) + { + Multiply(^^SBRW(0x0B, 0x18), 10, Index(BATS, 0x01)) + Multiply(^^SBRW(0x0B, 0x10), 10, Index(BATS, 0x02)) + Store(^^SBRW(0x0B, 0x19), Index(BATS, 0x04)) + Store(^^SBRB(0x0B, 0x21), Index(BATS, 0x09)) + Store(^^SBRB(0x0B, 0x22), Index(BATS, 0x0B)) + Store(^^SBRB(0x0B, 0x20), Index(BATS, 0x0C)) + + Return(BATS) + } + + Method(_STA, 0, NotSerialized) + { + If(And(^^SBRW(0x0A, 0x01), 0x01)) { + Return(0x1f) + } else { + Return(0x0f) + } + } + + Method(_BST, 0, NotSerialized) + { + /* Check for battery presence. */ + If(LNot(And(^^SBRW(0x0A, 0x01), 0x01))) { + Return(Package(4) { + 0, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF + }) + } + Store(^^SBRW(0x0B, 0x09), Local1) + Store(Local1, Index(BATI, 0x03)) + Store(^^SBRW(0x0B, 0x0A), Local0) + /* Sign-extend Local0. */ + If(And(Local0, 0x8000)) + { + Not(Local0, Local0) + And(Increment(Local0), 0xFFFF, Local0) + } + + Multiply(Local0, Local1, Local0) + Divide(Local0, 1000, , Index(BATI, 1)) + Multiply(^^SBRW(0x0B, 0x0F), 10, Index(BATI, 2)) + If(HPAC) + { + If(LNot(And(^^SBRW(0x0B, 0x16), 0x40))) { + Store(2, Index(BATI, 0)) + } Else { + Store(0, Index(BATI, 0)) + } + } + Else + { + Store(0x01, Index(BATI, 0)) + } + + Return(BATI) + } + } +} diff --git a/src/mainboard/apple/macbook2_1/acpi/i945_pci_irqs.asl b/src/mainboard/apple/macbook2_1/acpi/i945_pci_irqs.asl new file mode 100644 index 0000000..6047def --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi/i945_pci_irqs.asl @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0001FFFF, 0, 0, 0x10 }, + Package() { 0x0002FFFF, 0, 0, 0x10 }, + Package() { 0x0007FFFF, 0, 0, 0x10 }, + Package() { 0x001BFFFF, 0, 0, 0x16 }, + Package() { 0x001CFFFF, 0, 0, 0x11 }, + Package() { 0x001CFFFF, 1, 0, 0x10 }, + Package() { 0x001CFFFF, 2, 0, 0x12 }, + Package() { 0x001CFFFF, 3, 0, 0x13 }, + Package() { 0x001DFFFF, 0, 0, 0x15 }, + Package() { 0x001DFFFF, 1, 0, 0x13 }, + Package() { 0x001DFFFF, 2, 0, 0x12 }, + Package() { 0x001DFFFF, 3, 0, 0x10 }, + Package() { 0x001EFFFF, 0, 0, 0x16 }, + Package() { 0x001EFFFF, 1, 0, 0x14 }, + Package() { 0x001FFFFF, 0, 0, 0x12 }, + Package() { 0x001FFFFF, 1, 0, 0x13 }, + Package() { 0x001FFFFF, 3, 0, 0x10 } + }) + } Else { + Return (Package() { + Package() { 0x0001FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0002FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0007FFFF, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001BFFFF, 0, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001CFFFF, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001CFFFF, 1, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001CFFFF, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001CFFFF, 3, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001DFFFF, 0, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001DFFFF, 1, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001DFFFF, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001DFFFF, 3, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001EFFFF, 0, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001EFFFF, 1, _SB.PCI0.LPCB.LNKE, 0 }, + Package() { 0x001FFFFF, 0, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001FFFFF, 1, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001FFFFF, 3, _SB.PCI0.LPCB.LNKA, 0 } + }) + } +} diff --git a/src/mainboard/apple/macbook2_1/acpi/ich7_pci_irqs.asl b/src/mainboard/apple/macbook2_1/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..5354901 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi/ich7_pci_irqs.asl @@ -0,0 +1,74 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x15 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x16 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x17 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x14 }, + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x16 }, + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x14 }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x17 }, + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x13 }, + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x16 }, + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x14 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x15 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } + }) + } Else { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKH, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LPCB.LNKE, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LPCB.LNKE, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LPCB.LNKH, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKC, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKD, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LPCB.LNKB, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LPCB.LNKA, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LPCB.LNKD, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LPCB.LNKC, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LPCB.LNKB, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LPCB.LNKE, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } + }) +} diff --git a/src/mainboard/apple/macbook2_1/acpi/platform.asl b/src/mainboard/apple/macbook2_1/acpi/platform.asl new file mode 100644 index 0000000..1c6ac6e --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi/platform.asl @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} + +// Power notification + +External (_PR_.CPU0, DeviceObj) +External (_PR_.CPU1, DeviceObj) + +Method (PNOT) +{ + If (MPEN) { + If(And(PDC0, 0x08)) { + Notify (_PR_.CPU0, 0x80) // _PPC + + If (And(PDC0, 0x10)) { + Sleep(100) + Notify(_PR_.CPU0, 0x81) // _CST + } + } + + If(And(PDC1, 0x08)) { + Notify (_PR_.CPU1, 0x80) // _PPC + If (And(PDC1, 0x10)) { + Sleep(100) + Notify(_PR_.CPU1, 0x81) // _CST + } + } + + } Else { // UP + Notify (_PR_.CPU0, 0x80) + Sleep(0x64) + Notify(_PR_.CPU0, 0x81) + } +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + // TRAP(71) // TODO + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + /* Linux answers _OSI with "True" for a couple of + * Windows version queries. But unlike Windows it + * needs a Video repost, so let's determine whether + * we're running Linux. + */ + + If (_OSI("Linux")) { + Store (1, LINX) + } + + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + } + + /* And the OS workarounds start right after we know what we're + * running: Windows XP SP1 needs to have C-State coordination + * enabled in SMM. + */ + If (LAnd(LEqual(OSYS, 2001), MPEN)) { + // TRAP(61) // TODO + } + + /* SMM power state and C4-on-C3 settings need to be updated */ + // TRAP(43) // TODO + } +} + diff --git a/src/mainboard/apple/macbook2_1/acpi/superio.asl b/src/mainboard/apple/macbook2_1/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/apple/macbook2_1/acpi/video.asl b/src/mainboard/apple/macbook2_1/acpi/video.asl new file mode 100644 index 0000000..c2f9dfb --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi/video.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (DSPC) +{ + Name (_ADR, 0x00020001) + OperationRegion (DSPC, PCI_Config, 0x00, 0x100) + Field (DSPC, ByteAcc, NoLock, Preserve) + { + Offset (0xf4), + BRTC, 8 + } + + Method(BRTD, 0, NotSerialized) + { + Store(BRTC, Local0) + if (LGreater (Local0, 15)) + { + Subtract(Local0, 16, Local0) + Store(Local0, BRTC) + } + } + + Method(BRTU, 0, NotSerialized) + { + Store (BRTC, Local0) + if (LLess(Local0, 0xff)) + { + Add (Local0, 16, Local0) + Store(Local0, BRTC) + } + } +} diff --git a/src/mainboard/apple/macbook2_1/acpi_tables.c b/src/mainboard/apple/macbook2_1/acpi_tables.c new file mode 100644 index 0000000..ada7d08 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/acpi_tables.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include "southbridge/intel/i82801gx/nvs.h" +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); + + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/apple/macbook2_1/board_info.txt b/src/mainboard/apple/macbook2_1/board_info.txt new file mode 100644 index 0000000..b620278 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/board_info.txt @@ -0,0 +1,6 @@ +Board name: Macbook2,1 +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/apple/macbook2_1/cmos.default b/src/mainboard/apple/macbook2_1/cmos.default new file mode 100644 index 0000000..0185e94 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/cmos.default @@ -0,0 +1,21 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +hyper_threading=Enable +nmi=Enable +boot_devices='' +boot_default=0x40 +cmos_defaults_loaded=Yes +lpt=Enable +volume=0x3 +tft_brightness=0xff +first_battery=Primary +bluetooth=Enable +wlan=Enable +wwan=Enable +trackpoint=Enable +fn_ctrl_swap=Disable +sticky_fn=Disable +power_management_beeps=Enable +low_battery_beep=Enable diff --git a/src/mainboard/apple/macbook2_1/cmos.layout b/src/mainboard/apple/macbook2_1/cmos.layout new file mode 100644 index 0000000..469371e --- /dev/null +++ b/src/mainboard/apple/macbook2_1/cmos.layout @@ -0,0 +1,162 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 h 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +#409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default +936 1 e 8 cmos_defaults_loaded +937 1 e 1 lpt +#938 46 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ram initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +1064 8 h 0 volume +1072 8 h 0 tft_brightness +1080 1 e 9 first_battery +1081 1 e 1 bluetooth +1082 1 e 1 wwan +1083 1 e 1 wlan +1084 1 e 1 trackpoint +1085 1 e 1 fn_ctrl_swap +1086 1 e 1 sticky_fn +1087 1 e 1 power_management_beeps +1088 1 e 1 low_battery_beep +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 No +8 1 Yes +9 0 Secondary +9 1 Primary + +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/apple/macbook2_1/devicetree.cb b/src/mainboard/apple/macbook2_1/devicetree.cb new file mode 100644 index 0000000..a3dfe3a --- /dev/null +++ b/src/mainboard/apple/macbook2_1/devicetree.cb @@ -0,0 +1,107 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/i945 + + register "gpu_hotplug" = "0x00000220" + register "gpu_lvds_use_spread_spectrum_clock" = "1" + register "gpu_lvds_is_dual_channel" = "0" + register "gpu_backlight" = "0x1280128" + + device cpu_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x8086 0x7270 + end + device pci 02.0 on # VGA controller + subsystemid 0x8086 0x7270 + end + device pci 02.1 on # display controller + subsystemid 0x17aa 0x201a + end + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "2" + register "gpi7_routing" = "2" + + register "sata_ahci" = "0x1" + register "sata_ports_implemented" = "0x04" + + register "gpe0_en" = "0x11000006" + register "alt_gp_smi_en" = "0x1000" + + register "ide_enable_primary" = "1" + register "ide_enable_secondary" = "1" + + register "c4onc3_enable" = "1" + device pci 1b.0 on # Audio Controller + subsystemid 0x8384 0x7680 + end + device pci 1c.0 on end # Ethernet + device pci 1c.1 on end # Atheros WLAN + device pci 1d.0 on # USB UHCI + subsystemid 0x8086 0x7270 + end + device pci 1d.1 on # USB UHCI + subsystemid 0x8086 0x7270 + end + device pci 1d.2 on # USB UHCI + subsystemid 0x8086 0x7270 + end + device pci 1d.3 on # USB UHCI + subsystemid 0x8086 0x7270 + end + device pci 1d.7 on # USB2 EHCI + subsystemid 0x8086 0x7270 + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x8086 0x7270 + end + device pci 1f.1 on # IDE + subsystemid 0x8086 0x7270 + end + device pci 1f.2 on # SATA + subsystemid 0x8086 0x7270 + end + device pci 1f.3 on # SMBUS + subsystemid 0x8086 0x7270 + end + end + end +end diff --git a/src/mainboard/apple/macbook2_1/dsdt.asl b/src/mainboard/apple/macbook2_1/dsdt.asl new file mode 100644 index 0000000..fb0a34f --- /dev/null +++ b/src/mainboard/apple/macbook2_1/dsdt.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define BRIGHTNESS_UP \DSPC.BRTU +#define BRIGHTNESS_DOWN \DSPC.BRTD +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/apple/macbook2_1/fadt.c b/src/mainboard/apple/macbook2_1/fadt.c new file mode 100644 index 0000000..314153d --- /dev/null +++ b/src/mainboard/apple/macbook2_1/fadt.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/acpi.h> + +void mainboard_fill_fadt(acpi_fadt_t * fadt) +{ + fadt->p_lvl3_lat = 0x23; +} diff --git a/src/mainboard/apple/macbook2_1/hda_verb.c b/src/mainboard/apple/macbook2_1/hda_verb.c new file mode 100644 index 0000000..1fe188e --- /dev/null +++ b/src/mainboard/apple/macbook2_1/hda_verb.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Vladimir Serbinenko. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License, + * or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x83847680, /* Codec Vendor / Device ID: SigmaTel STAC9221 A1 */ + 0x106b2200, /* Subsystem ID */ + 0x0000000B, /* Number of 4 dword sets */ + + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x106B2200), + + /* NID 0x0A. */ + AZALIA_PIN_CFG(0x0, 0x0A, 0x0321E21F), + + /* NID 0x0B. */ + AZALIA_PIN_CFG(0x0, 0x0B, 0x03A1E02E), + + /* NID 0x0C. */ + AZALIA_PIN_CFG(0x0, 0x0C, 0x9017E110), + + /* NID 0x0D. */ + AZALIA_PIN_CFG(0x0, 0x0D, 0x9017E11F), + + /* NID 0x0E. */ + AZALIA_PIN_CFG(0x0, 0x0E, 0x400000FE), + + /* NID 0x0F */ + AZALIA_PIN_CFG(0x0, 0x0F, 0x0381E020), + + /* NID 0x10 */ + AZALIA_PIN_CFG(0x0, 0x10, 0x1345E230), + + /* NID 0x11 */ + AZALIA_PIN_CFG(0x0, 0x11, 0x13C5E240), + + /* NID 0x15 */ + AZALIA_PIN_CFG(0x0, 0x15, 0x400000FC), + + /* NID 0x1B. */ + AZALIA_PIN_CFG(0x0, 0x1B, 0x400000FB), + +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/apple/macbook2_1/irq_tables.c b/src/mainboard/apple/macbook2_1/irq_tables.c new file mode 100644 index 0000000..8991d7f --- /dev/null +++ b/src/mainboard/apple/macbook2_1/irq_tables.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 15, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf5, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ + {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ + {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ + {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ + {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ + {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ + {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ + {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ + {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ + {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ + {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ + {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ + {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/apple/macbook2_1/mainboard.c b/src/mainboard/apple/macbook2_1/mainboard.c new file mode 100644 index 0000000..99527c1 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/mainboard.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <northbridge/intel/i945/i945.h> +#include <pc80/mc146818rtc.h> +#include <arch/x86/include/arch/acpigen.h> +#include <smbios.h> +#include <drivers/intel/gma/int15.h> +#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT + +int get_cst_entries(acpi_cstate_t **entries) +{ + return 0; +} + +static void mainboard_init(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); +} + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; + diff --git a/src/mainboard/apple/macbook2_1/mptable.c b/src/mainboard/apple/macbook2_1/mptable.c new file mode 100644 index 0000000..cc97e52 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/mptable.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x16); /* HD Audio 0:1b.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x11); /* PCIe 0:1c.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x10); /* PCIe 0:1c.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x12); /* PCIe 0:1c.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x13); /* PCIe 0:1c.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x15); /* USB 0:1d.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x13); /* USB 0:1d.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x10); /* USB 0:1d.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x12); /* LPC 0:1f.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x13); /* IDE 0:1f.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x03, 0x02, 0x10); /* SATA 0:1f.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x03, (0x03 << 2) , 0x02, 0x13); /* Firewire 3:03.0 */ + + mptable_lintsrc(mc, isa_bus); + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/apple/macbook2_1/romstage.c b/src/mainboard/apple/macbook2_1/romstage.c new file mode 100644 index 0000000..9bf6ec4 --- /dev/null +++ b/src/mainboard/apple/macbook2_1/romstage.c @@ -0,0 +1,414 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <cbmem.h> +#include <timestamp.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include "northbridge/intel/i945/i945.h" +#include "northbridge/intel/i945/raminit.h" +#include "southbridge/intel/i82801gx/i82801gx.h" + +void setup_ich7_gpios(void) +{ + printk(BIOS_DEBUG, " GPIOS..."); + + /* THINKPAD_X60 GPIO: + * 1: HDD_PRESENCE# + * 6: Unknown (Pulled high by R215 to VCC3B) + * 7: BDC_PRESENCE# + * 8: H8_WAKE# + * 9: RTC_BAT_IN# + * 10: Unknown (Pulled high by R700 to VCC3M) + * 12: H8SCI# + * 13: SLICE_ON_3M# + * 14: Unknown (Pulled high by R321 to VCC3) + * 15: Unknown (Pulled high by R258 to VCC3) + * 19: Unknown (Pulled low by R594) + * 21: Unknown (Pulled high by R145 to VCC3) + * 22: FWH_WP# + * 25: MDC_KILL# + * 33: HDD_PRESENCE_2# + * 35: CLKREQ_SATA# + * 36: PLANARID0 + * 37: PLANARID1 + * 38: PLANARID2 + * 39: PLANARID3 + * 48: FWH_TBL# + */ + + outl(0x1f40f7e2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xfcc06bdf, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + /* Output Control Registers */ + outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + /* Input Control Registers */ + outl(0x00002082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000100c0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ +} + +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); + + // I/O Decode Ranges + // THINKPAD_X60: 0x0210 == 00000010 00010000 + // Macbook21: 0x0010 == 00000000 00010000 + // Bit 9:8 LPT Decode Range. This field determines which range to + // decode for the LPT Port. + // 00 = 378h  37Fh and 778h  77Fh + // 10 = 3BCh  3BEh and 7BCh  7BEh + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); + + // LPC_EN--LPC I/F Enables Register + // THINKPAD_X60: 0x1f0d == 00011111 00001101 + // Macbook21: 0x3807 == 00111000 00000111 + // Bit 13 CNF2_LPC_EN -- R/W. Microcontroller Enable # 2. + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 4Eh and 4Fh + // to the LPC interface. This range is used for a + // microcontroller. + // Bit 12 CNF1_LPC_EN -- R/W. Super I/O Enable. + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 2Eh and 2Fh + // to the LPC interface. This range is used for + // Super I/O devices. + // Bit 11 MC_LPC_EN -- R/W. Microcontroller Enable # 1. + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 62h and 66h + // to the LPC interface. This range is used for a + // microcontroller. + // Bit 10 KBC_LPC_EN -- R/W. Keyboard Enable. + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 60h and 64h + // to the LPC interface. This range is used for a + // microcontroller. + // Bit 9 GAMEH_LPC_EN -- R/W. High Gameport Enable + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 208h to 20Fh + // to the LPC interface. This range is used for a gameport. + // Bit 8 GAMEL_LPC_EN -- R/W. Low Gameport Enable + // 0 = Disable. + // 1 = Enables the decoding of the I/O locations 200h to 207h + // to the LPC interface. This range is used for a gameport. + // Bit 3 FDD_LPC_EN -- R/W. Floppy Drive Enable + // 0 = Disable. + // 1 = Enables the decoding of the FDD range to the LPC + // interface. This range is selected in the LPC_FDD/LPT + // Decode Range Register (D31:F0:80h, bit 12). + // Bit 2 LPT_LPC_EN -- R/W. Parallel Port Enable + // 0 = Disable. + // 1 = Enables the decoding of the LPT range to the LPC + // interface. This range is selected in the LPC_FDD/LPT + // Decode Range Register (D31:F0:80h, bit 9:8). + // Bit 1 COMB_LPC_EN -- R/W. Com Port B Enable + // 0 = Disable. + // 1 = Enables the decoding of the COMB range to the LPC + // interface. This range is selected in the LPC_COM Decode + // Range Register (D31:F0:80h, bits 6:4). + // Bit 0 COMA_LPC_EN -- R/W. Com Port A Enable + // 0 = Disable. + // 1 = Enables the decoding of the COMA range to the LPC + // interface. This range is selected in the LPC_COM Decode + // Range Register (D31:F0:80h, bits 3:2). + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3807); + + /* GEN1_DEC, LPC Interface Generic Decode Range 1 */ + // THINKPAD_X60: 0x1601 0x007c == 00000000 01111100 00010110 00000001 + // Macbook21: 0x0681 0x000c == 00000000 00001100 00000110 10000001 + // Bit 31:24 Reserved. + // Bit 23:18 Generic I/O Decode Range Address[7:2] Mask: A `1' in any + // bit position indicates that any value in the corresponding + // address bit in a received cycle will be treated as a + // match. The corresponding bit in the Address field, below, + // is ignored. The mask is only provided for the lower 6 bits + // of the DWord address, allowing for decoding blocks up to + // 256 bytes in size. + // Bit 17:16 Reserved. + // Bit 15:2 Generic I/O Decode Range 1 Base Address (GEN1_BASE). This + // address is aligned on a 128-byte boundary, and must have + // address lines 31:16 as 0. NOTE: The Intel ICH7 does not + // provide decode down to the word or byte level. + // Bit 1 Reserved. + // Bit 0 Generic Decode Range 1 Enable (GEN1_EN) -- R/W. + // 0 = Disable. + // 1 = Enable the GEN1 I/O range to be forwarded to the LPC + // I/F + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0681); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x000c); + + /* GEN2_DEC, LPC Interface Generic Decode Range 2 */ + // THINKPAD_X60: 0x15e1 0x000c == 00000000 00001100 00010101 11100001 + // Macbook21: 0x1641 0x000c == 00000000 00001100 00010110 01000001 + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x1641); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); + + /* GEN3_DEC, LPC Interface Generic Decode Range 3 */ + // THINKPAD_X60: 0x1681 0x001c == 00000000 00011100 00010110 10000001 + // Macbook21: 0x0000 0x0000 + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x0000); // obsolete, because it writes zeros? + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x0000); + + /* GEN4_DEC, LPC Interface Generic Decode Range 4 */ + // THINKPAD_X60: 0x0000 0x0000 + // Macbook21: 0x0301 0x001c == 00000000 00011100 00000011 00000001 + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x90, 0x0301); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x92, 0x001c); +} + +static void rcba_config(void) +{ + /* V0CTL Virtual Channel 0 Resource Control */ + RCBA32(0x0014) = 0x80000001; + /* V1CAP Virtual Channel 1 Resource Capability */ + RCBA32(0x001c) = 0x03128010; + + /* Device 1f interrupt pin register */ + RCBA32(0x3100) = 0x00042210; + RCBA32(0x3108) = 0x10004321; + + /* PCIe Interrupts */ + RCBA32(0x310c) = 0x00214321; + /* HD Audio Interrupt */ + RCBA32(0x3110) = 0x00000001; + + /* dev irq route register */ + RCBA16(0x3140) = 0x0232; + RCBA16(0x3142) = 0x3246; + RCBA16(0x3144) = 0x0235; + RCBA16(0x3146) = 0x3201; + RCBA16(0x3148) = 0x3216; + + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + /* Enable upper 128bytes of CMOS */ + RCBA32(0x3400) = (1 << 2); + + /* Disable unused devices */ + RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_PCIE4 | FD_PCIE3 | FD_INTLAN | FD_ACMOD | FD_ACAUD; + RCBA32(0x3418) |= (1 << 0); // Required. + + /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ + // RCBA32(0x1e84) = 0x00020001; + // RCBA32(0x1e80) = 0x0000fe01; + + /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ + RCBA32(0x1e9c) = 0x000200f0; + RCBA32(0x1e98) = 0x000c0801; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA32(0x3418) |= (1 << 0); + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +void main(unsigned long bist) +{ + u32 reg32; + int boot_mode = 0; + int cbmem_was_initted; + const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x51, 0x52, 0x53 }; + + + timestamp_init(get_initial_timestamp()); + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + udelay(200 * 1000); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + + ich7_enable_lpc(); + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, + "Soft reset detected, rebooting properly.\n"); + outb(0x6, 0xcf9); + while (1) + asm("hlt"); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(boot_mode, spd_addrmap); + timestamp_add_now(TS_AFTER_INITRAM); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(); + +#if !CONFIG_HAVE_ACPI_RESUME +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 +#if CONFIG_DEBUG_RAM_SETUP + sdram_dump_mchbar_registers(); + + { + /* This will not work if TSEG is in place! */ + u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); + + printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); + ram_check(0x00000000, 0x000a0000); + ram_check(0x00100000, tom); + } +#endif +#endif +#endif + + MCHBAR16(SSKPD) = 0xCAFE; + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, + SKPAD_ACPI_S3_MAGIC); + } +#endif + + timestamp_add_now(TS_END_ROMSTAGE); + +} diff --git a/src/mainboard/apple/macbook2_1/smihandler.c b/src/mainboard/apple/macbook2_1/smihandler.c new file mode 100644 index 0000000..ab039dd --- /dev/null +++ b/src/mainboard/apple/macbook2_1/smihandler.c @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include <pc80/mc146818rtc.h> +#include <delay.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); + + if (!pmbase) + return 0; + + switch(data) { + case APM_CNT_ACPI_ENABLE: + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + case APM_CNT_ACPI_DISABLE: + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + default: + break; + } + return 0; +} diff --git a/src/mainboard/artec_group/dbe61/Kconfig b/src/mainboard/artec_group/dbe61/Kconfig index 5266e15..82792c7 100644 --- a/src/mainboard/artec_group/dbe61/Kconfig +++ b/src/mainboard/artec_group/dbe61/Kconfig @@ -1,4 +1,4 @@ -if BOARD_ARTEC_GROUP_DBE61 || BOARD_LINUTOP_LINUTOP1 +if BOARD_ARTEC_GROUP_DBE61 || BOARD_LINUTOP_LINUTOP_1
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y diff --git a/src/mainboard/asrock/Kconfig b/src/mainboard/asrock/Kconfig index 9b3f63f..c3a469a 100644 --- a/src/mainboard/asrock/Kconfig +++ b/src/mainboard/asrock/Kconfig @@ -32,7 +32,7 @@ endchoice
source "src/mainboard/asrock/939a785gmh/Kconfig" source "src/mainboard/asrock/e350m1/Kconfig" -source "src/mainboard/asrock/imb-a180/Kconfig" +source "src/mainboard/asrock/imb_a180/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/asrock/imb-a180/BiosCallOuts.c b/src/mainboard/asrock/imb-a180/BiosCallOuts.c deleted file mode 100644 index 53b6871..0000000 --- a/src/mainboard/asrock/imb-a180/BiosCallOuts.c +++ /dev/null @@ -1,337 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia.h> -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "Ids.h" -#include "OptionsIds.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "cbfs.h" -#include <stdlib.h> - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip - */ -static const CODEC_ENTRY Alc662_VerbTbl[] = -{ - { 0x14, /*01014010*/ /* Port D - green headphone jack */ - (AZALIA_PINCFG_PORT_JACK << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_LINEOUT << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_GREEN << 12) - | (1 << 4) - | (0 << 0) - }, - { 0x15, /*0x90170120*/ /* Port A - white speaker header */ - (AZALIA_PINCFG_PORT_FIXED << 30) - | (AZALIA_PINCFG_LOCATION_INTERNAL << 24) - | (AZALIA_PINCFG_DEVICE_SPEAKER << 20) - | (AZALIA_PINCFG_CONN_OTHER_ANALOG << 16) - | (AZALIA_PINCFG_COLOR_WHITE << 12) - | (AZALIA_PINCFG_MISC_IGNORE_PRESENCE << 8) - | (2 << 4) - | (0 << 0) - }, - { 0x16, 0x411111F0 }, /* Port G - not connected */ - { 0x18, /*0x01A19040*/ /* Port B - pink headphone jack */ - (AZALIA_PINCFG_PORT_JACK << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_PINK << 12) - | (4 << 4) - | (0 << 0) - }, - { 0x19, /*0x02A19050*/ /* Port F - front panel header mic */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) - | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_PINK << 12) - | (5 << 4) - | (0 << 0) - }, - { 0x1A, /*0x0181304F*/ /* Port C - NL blue headphone jack */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) - | (AZALIA_PINCFG_DEVICE_LINEIN << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_BLUE << 12) - | (4 << 4) - | (0xF << 0) - }, - { 0x1B, /*0x02214030*/ /* Port E - front panel line-out */ - (AZALIA_PINCFG_PORT_NC << 30) - | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) - | (AZALIA_PINCFG_DEVICE_HP_OUT << 20) - | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) - | (AZALIA_PINCFG_COLOR_GREEN << 12) - | (3 << 4) - | (0 << 0) - }, - { 0x1C, 0x411111F0 }, /* CD-in - Not Connected */ - { 0x1D, 0x411111F0 }, /* PC Beep - Not Connected */ - { 0x1E, 0x411111F0 }, /* S/PDIF - Not connected */ - { 0xFF, 0xFFFFFFFF }, -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0662, (CODEC_ENTRY*)Alc662_VerbTbl}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -#define FAN_INPUT_INTERNAL_DIODE 0 -#define FAN_INPUT_TEMP0 1 -#define FAN_INPUT_TEMP1 2 -#define FAN_INPUT_TEMP2 3 -#define FAN_INPUT_TEMP3 4 -#define FAN_INPUT_TEMP0_FILTER 5 -#define FAN_INPUT_ZERO 6 -#define FAN_INPUT_DISABLED 7 - -#define FAN_AUTOMODE (1 << 0) -#define FAN_LINEARMODE (1 << 1) -#define FAN_STEPMODE ~(1 << 1) -#define FAN_POLARITY_HIGH (1 << 2) -#define FAN_POLARITY_LOW ~(1 << 2) - -/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ -#define FREQ_28KHZ 0x0 -#define FREQ_25KHZ 0x1 -#define FREQ_23KHZ 0x2 -#define FREQ_21KHZ 0x3 -#define FREQ_29KHZ 0x4 -#define FREQ_18KHZ 0x5 -#define FREQ_100HZ 0xF7 -#define FREQ_87HZ 0xF8 -#define FREQ_58HZ 0xF9 -#define FREQ_44HZ 0xFA -#define FREQ_35HZ 0xFB -#define FREQ_29HZ 0xFC -#define FREQ_22HZ 0xFD -#define FREQ_14HZ 0xFE -#define FREQ_11HZ 0xFF - -/* imb_a180 Hardware Monitor Fan Control - * Hardware limitation: - * HWM failed to read the input temperture vi I2C, - * if other software switch the I2C switch by mistake or intention. - * We recommend to using IMC to control Fans, instead of HWM. - */ -#if 0 -static void oem_fan_control(FCH_DATA_BLOCK *FchParams) -{ - FCH_HWM_FAN_CTR oem_factl[5] = { - /* temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ - /* imb_a180 FanOUT0 Fan header J32 */ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - /* imb_a180 FanOUT1 Fan header J31*/ - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, - }; - LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); - - /* Enable IMC fan control. the recommand way */ -#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1) - /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ - - FchParams->Imc.ImcEnable = TRUE; - FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ - FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ - - LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); - - /* Thermal Zone Parameter */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0; - - /* IMC Fan Policy temperature thresholds */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; - - /* IMC Fan Policy PWM Settings */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ - FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; - - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ - FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ - - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; - - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ - FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; - - /* IMC Function */ - FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8; - - /* NOTE: - * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, - * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. - * so we remove it from AGESA code. Please Seee FchInitLateHwm. - */ - -#else /* HWM fan control, the way not recommand */ - FchParams->Imc.ImcEnable = FALSE; - FchParams->Hwm.HwMonitorEnable = TRUE; - FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ - -#endif /* CONFIG_HUDSON_IMC_FWM */ -} -#endif - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; - - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ - FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_reset->FchReset.Xhci1Enable = FALSE; - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList; - /* Azalia Controller Front Panel OEM Table Pointer */ - - /* Fan Control */ - //oem_fan_control(FchParams_env); - - /* XHCI configuration */ - FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_env->Usb.Xhci1Enable = FALSE; - - /* sata configuration */ - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/asrock/imb-a180/Kconfig b/src/mainboard/asrock/imb-a180/Kconfig deleted file mode 100644 index aa075c8..0000000 --- a/src/mainboard/asrock/imb-a180/Kconfig +++ /dev/null @@ -1,92 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_ASROCK_IMB_A180 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY16_KB - select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB - select SOUTHBRIDGE_AMD_AGESA_YANGTZE - select SUPERIO_WINBOND_W83627UHG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default asrock/imb-a180 - -config MAINBOARD_PART_NUMBER - string - default "IMB-A180" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config ACPI_SSDTX_NUM - int - default 0 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config HUDSON_LEGACY_FREE - bool - default y - -# bit 1,0 - pin 0 -# bit 3,2 - pin 1 -# bit 5,4 - pin 2 -# bit 7,6 - pin 3 -config AZ_PIN - hex - default 0x2 - -endif # BOARD_ASROCK_IMB_A180 diff --git a/src/mainboard/asrock/imb-a180/Makefile.inc b/src/mainboard/asrock/imb-a180/Makefile.inc deleted file mode 100644 index a83297a..0000000 --- a/src/mainboard/asrock/imb-a180/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asrock/imb-a180/OptionsIds.h b/src/mainboard/asrock/imb-a180/OptionsIds.h deleted file mode 100644 index 0a1d328..0000000 --- a/src/mainboard/asrock/imb-a180/OptionsIds.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_CONTROL_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE -//#define IDSOPT_PERF_ANALYSIS TRUE -#define IDSOPT_ASSERT_ENABLED TRUE -//#undef IDSOPT_DEBUG_ENABLED -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c b/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c deleted file mode 100644 index 24d8381..0000000 --- a/src/mainboard/asrock/imb-a180/PlatformGnbPcie.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "heapManager.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" - -#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE - -static const PCIe_PORT_DESCRIPTOR PortList [] = { - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x01, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x02, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x03, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x04, 0) - }, - /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, - HotplugDisabled, - PcieGenMaxSupported, - PcieGenMaxSupported, - AspmDisabled, 0x05, 0) - } -}; - -static const PCIe_DDI_DESCRIPTOR DdiList [] = { - /* DP0 to HDMI0/DP */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) - }, - /* DP1 to FCH */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) - }, - /* DP2 to HDMI1/DP */ - { - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) - }, -}; - -static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { - .Flags = DESCRIPTOR_TERMINATE_LIST, - .SocketId = 0, - .PciePortList = PortList, - .DdiLinkList = DdiList -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This is the stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - /* GNB PCIe topology Porting */ - - /* */ - /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ - /* */ - AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ - ASSERT(FALSE); - return; - } - - PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); - InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; -} diff --git a/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h b/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h deleted file mode 100644 index 1db8b2d..0000000 --- a/src/mainboard/asrock/imb-a180/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl b/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl deleted file mode 100644 index 074dd7c..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/AmdImc.asl +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//BTDC Due to IMC Fan, ACPI control codes -OperationRegion(IMIO, SystemIO, 0x3E, 0x02) -Field(IMIO , ByteAcc, NoLock, Preserve) { - IMCX,8, - IMCA,8 -} - -IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { - Offset(0x80), - MSTI, 8, - MITS, 8, - MRG0, 8, - MRG1, 8, - MRG2, 8, - MRG3, 8, -} - -Method(WACK, 0) -{ - Store(0, Local0) - While (LNotEqual(Local0, 0xFA)) { - Store(MRG0, Local0) - Sleep(10) - } -} - -//Init -Method (ITZE, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} - -//Sleep -Method (IMSP, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(1, MRG1) - Store(0, MRG2) - Store(0x98, MSTI) - WACK() - - Store(0, MRG0) - Store(0xB4, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() -} - -//Wake -Method (IMWK, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} diff --git a/src/mainboard/asrock/imb-a180/acpi/gpe.asl b/src/mainboard/asrock/imb-a180/acpi/gpe.asl deleted file mode 100644 index 8d4f8a2..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/gpe.asl +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/asrock/imb-a180/acpi/ide.asl b/src/mainboard/asrock/imb-a180/acpi/ide.asl deleted file mode 100644 index 853dc13..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/ide.asl +++ /dev/null @@ -1,250 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No IDE functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - /* save total time of primary PIO master timing to PIO spd0 */ - Store(GTTM(PPTM), PSD0) - /* save total time of primary PIO slave Timing to PIO spd1 */ - Store(GTTM(PPTS), PSD1) - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} -#endif diff --git a/src/mainboard/asrock/imb-a180/acpi/mainboard.asl b/src/mainboard/asrock/imb-a180/acpi/mainboard.asl deleted file mode 100644 index 05523fb..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/mainboard.asl +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -/* AcpiGpe0Blk */ -OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) - Field(GP0B, ByteAcc, NoLock, Preserve) { - , 11, - USBS, 1, -} diff --git a/src/mainboard/asrock/imb-a180/acpi/routing.asl b/src/mainboard/asrock/imb-a180/acpi/routing.asl deleted file mode 100644 index a0a53d2..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/routing.asl +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F16 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - - /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* FCH devices */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - -}) - -Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 44 }, - Package(){0x0001FFFF, 1, 0, 45 }, - - /* Bus 0, Dev 2 - PCIe Bridges */ - Package(){0x0002FFFF, 0, 0, 18 }, - Package(){0x0002FFFF, 1, 0, 19 }, - Package(){0x0002FFFF, 2, 0, 16 }, - Package(){0x0002FFFF, 3, 0, 17 }, - - - /* SB devices in APIC mode */ - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ - /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - -}) - -Name(PS2, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS2, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GFX */ -Name(PS4, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, -}) - -/* GPP 0 */ -Name(PS5, Package(){ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, -}) -Name(APS5, Package(){ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, -}) - -/* GPP 1 */ -Name(PS6, Package(){ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, -}) -Name(APS6, Package(){ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, -}) - -/* GPP 2 */ -Name(PS7, Package(){ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, -}) -Name(APS7, Package(){ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) - -/* GPP 3 */ -Name(PS8, Package(){ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, -}) -Name(APS8, Package(){ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 18 }, -}) diff --git a/src/mainboard/asrock/imb-a180/acpi/sata.asl b/src/mainboard/asrock/imb-a180/acpi/sata.asl deleted file mode 100644 index 3d19222..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/sata.asl +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No SATA functionality */ - -#if 0 -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} -#endif diff --git a/src/mainboard/asrock/imb-a180/acpi/si.asl b/src/mainboard/asrock/imb-a180/acpi/si.asl deleted file mode 100644 index 3cc2170..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/si.asl +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/asrock/imb-a180/acpi/sleep.asl b/src/mainboard/asrock/imb-a180/acpi/sleep.asl deleted file mode 100644 index 2fc2efe..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/sleep.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ - -External(_SB.APTS, MethodObj) -External(_SB.AWAK, MethodObj) - -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - Store(7, UPWS) - _SB.APTS(Arg0) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - Store(1,USBS) - - _SB.AWAK(Arg0) - - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/asrock/imb-a180/acpi/superio.asl b/src/mainboard/asrock/imb-a180/acpi/superio.asl deleted file mode 100644 index ec72e36..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asrock/imb-a180/acpi/thermal.asl b/src/mainboard/asrock/imb-a180/acpi/thermal.asl deleted file mode 100644 index 0466a1b..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/thermal.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No thermal zone functionality */ diff --git a/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl b/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl deleted file mode 100644 index 7b5b1c6..0000000 --- a/src/mainboard/asrock/imb-a180/acpi/usb_oc.asl +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -/* USB Overcurrent GPEs */ - -#if 0 /* TODO: Update for imba180 */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - } - } -} -#endif diff --git a/src/mainboard/asrock/imb-a180/acpi_tables.c b/src/mainboard/asrock/imb-a180/acpi_tables.c deleted file mode 100644 index 2c480c3..0000000 --- a/src/mainboard/asrock/imb-a180/acpi_tables.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam16.h> - -#include "agesawrapper.h" - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - /* TODO: Remove the hardcode */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, - 0xFEC20000, 24); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *alib; - acpi_header_t *ivrs; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; /* it will used by fadt */ - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ /* it needs 64 bit alignment */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; /* it will be used by fadt */ - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); - ivrs = agesawrapper_getlateinitptr(PICK_IVRS); - if (ivrs != NULL) { - memcpy((void *)current, ivrs, ivrs->length); - ivrs = (acpi_header_t *) current; - current += ivrs->length; - acpi_add_table(rsdp, ivrs); - } else { - printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); - } - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* ALIB */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } - else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - } - else { - printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); - } - acpi_add_table(rsdp,ssdt); - - printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/asrock/imb-a180/agesawrapper.c b/src/mainboard/asrock/imb-a180/agesawrapper.c deleted file mode 100644 index 5b8c97f..0000000 --- a/src/mainboard/asrock/imb-a180/agesawrapper.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ - -#include <stdint.h> -#include <string.h> -#include <cpu/x86/mtrr.h> -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "cpuRegisters.h" -#include "cpuCacheInit.h" -#include "cpuApicUtilities.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "Dispatcher.h" -#include "cpuCacheInit.h" -#include "amdlib.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" -#include "heapManager.h" -#include "FchPlatform.h" -#include "Fch.h" -#include <cpu/amd/agesa/s3_resume.h> -#include <arch/io.h> -#include <device/device.h> -#include "hudson.h" - - -#define FILECODE UNASSIGNED_FILE_FILECODE - -/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; -VOID *AcpiIvrs = NULL; - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*--------------------------------------------------------------------------------------- - * L O C A L F U N C T I O N S - *--------------------------------------------------------------------------------------- - */ -AGESA_STATUS agesawrapper_amdinitcpuio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; /* last address before non-posted range */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* For serial port */ - PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Set ROM cache onto WP to decrease post time */ - MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - LibAmdMemFill (&AmdResetParams, - 0, - sizeof (AMD_RESET_PARAMS), - &(AmdResetParams.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_POST_PARAMS *PostParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; - status = AmdInitPost (PostParams); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_ENV_PARAMS *EnvParam; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - status = AmdCreateStruct (&AmdParamStruct); - EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; - - status = AmdInitEnv (EnvParam); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - case PICK_IVRS: - return AcpiIvrs; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS *AmdLateParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ - AmdCreateStruct(&AmdParamStruct); - AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; - Status = AmdInitLate(AmdLateParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParams->DmiTable; - AcpiPstate = AmdLateParams->AcpiPState; - AcpiSrat = AmdLateParams->AcpiSrat; - AcpiSlit = AmdLateParams->AcpiSlit; - - AcpiWheaMce = AmdLateParams->AcpiWheaMce; - AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; - AcpiAlib = AmdLateParams->AcpiAlib; - AcpiIvrs = AmdLateParams->AcpiIvrs; - - printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," - "AcpiSlit:%x, Mce:%x, Cmc:%x," - "Alib:%x, AcpiIvrs:%x in %s\n", - (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, - (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, - (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); - - /* AmdReleaseStruct (&AmdParamStruct); */ - return Status; -} - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - LibAmdMemFill (&ApExeParams, - 0, - sizeof (AP_EXE_PARAMS), - &(ApExeParams.StdHeader)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - /* agesawrapper_amdreadeventlog(); */ - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - - -AGESA_STATUS agesawrapper_amdinitresume(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_fchs3earlyrestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - - FchInitS3EarlyRestore(&FchParams); - - return status; -} -#endif - -AGESA_STATUS agesawrapper_amds3laterestore(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - agesawrapper_amdinitcpuio(); - LibAmdMemFill (&AmdS3LateParams, - 0, - sizeof (AMD_S3LATE_PARAMS), - &(AmdS3LateParams.StdHeader)); - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ - -extern UINT8 picr_data[0x54], intr_data[0x54]; - -AGESA_STATUS agesawrapper_fchs3laterestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - UINT8 byte; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - FchInitS3LateRestore(&FchParams); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - return status; -} -#endif - -#ifndef __PRE_RAM__ - -AGESA_STATUS agesawrapper_amdS3Save(void) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdInterfaceParams, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdInterfaceParams.StdHeader)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - - AmdCreateStruct(&AmdInterfaceParams); - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save(AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - } - OemAgesaSaveMtrr(); - - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} - -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdreadeventlog ( - UINT8 HeapStatus - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - LibAmdMemFill (&AmdEventParams, - 0, - sizeof (EVENT_PARAMS), - &(AmdEventParams.StdHeader)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - AmdEventParams.StdHeader.HeapStatus = HeapStatus; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/asrock/imb-a180/agesawrapper.h b/src/mainboard/asrock/imb-a180/agesawrapper.h deleted file mode 100644 index acaa2b3..0000000 --- a/src/mainboard/asrock/imb-a180/agesawrapper.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ - PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); -AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitcpuio(void); -void *agesawrapper_getlateinitptr (int pick); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); - -AGESA_STATUS agesawrapper_fchs3earlyrestore(void); -AGESA_STATUS agesawrapper_fchs3laterestore(void); - -#endif diff --git a/src/mainboard/asrock/imb-a180/board_info.txt b/src/mainboard/asrock/imb-a180/board_info.txt deleted file mode 100644 index be1cde5..0000000 --- a/src/mainboard/asrock/imb-a180/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: mini -Board URL: http://www.asrock.com/ipc/overview.asp?Model=IMB-A180 -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asrock/imb-a180/buildOpts.c b/src/mainboard/asrock/imb-a180/buildOpts.c deleted file mode 100644 index 55df22a..0000000 --- a/src/mainboard/asrock/imb-a180/buildOpts.c +++ /dev/null @@ -1,507 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> -#include "AGESA.h" -//#include "CommonReturns.h" -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - -#define INSTALL_FT3_SOCKET_SUPPORT TRUE -#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE - -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP2_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT FALSE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE -#define INSTALL_FM2_SOCKET_SUPPORT FALSE - - -#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT - #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE - #undef INSTALL_FT3_SOCKET_SUPPORT - #define INSTALL_FT3_SOCKET_SUPPORT FALSE - #endif -#endif - -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE -#define BLDOPT_REMOVE_SRAT FALSE //TRUE -#define BLDOPT_REMOVE_SLIT FALSE //TRUE -#define BLDOPT_REMOVE_WHEA FALSE //TRUE -#define BLDOPT_REMOVE_CRAT TRUE -#define BLDOPT_REMOVE_CDIT TRUE -#define BLDOPT_REMOVE_DMI TRUE -//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -//This element selects whether P-States should be forced to be independent, -// as reported by the ACPI _PSD object. For single-link processors, -// setting TRUE for OS to support this feature. - -//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 15000 -#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 -#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 -#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 -#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_SLEW_RATE 10000 -#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE - -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the - // core for C-state entry requests. A value - // of 0 in this field specifies that the core - // does not trap any IO addresses for C-state entry. - // Values greater than 0xFFF8 results in undefined behavior. -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE TRUE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_DRAM_RATE 0 -#define BLDCFG_SCRUB_L2_RATE 0 -#define BLDCFG_SCRUB_L3_RATE 0 -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_SCRUB_DC_RATE 0 -#define BLDCFG_ECC_SYNC_FLOOD TRUE -#define BLDCFG_ECC_SYMBOL_SIZE 4 -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul -#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled -#define BLDCFG_IOMMU_SUPPORT FALSE -#define OPTION_GFX_INIT_SVIEW FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife - -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL -#define BLDCFG_CFG_ABM_SUPPORT TRUE - -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID -//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID -//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID - -#ifdef PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) -#endif - -#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' -#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed - -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE -/* - * Customized OEM build configurations for FCH component - */ -// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 -// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 -// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 -// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 -// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 -// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 -// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 -// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 -// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 -// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 -// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 -// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 -// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 -// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 -// #define BLDCFG_AZALIA_SSID 0x780D1022 -// #define BLDCFG_SMBUS_SSID 0x780B1022 -// #define BLDCFG_IDE_SSID 0x780C1022 -// #define BLDCFG_SATA_AHCI_SSID 0x78011022 -// #define BLDCFG_SATA_IDE_SSID 0x78001022 -// #define BLDCFG_SATA_RAID5_SSID 0x78031022 -// #define BLDCFG_SATA_RAID_SSID 0x78021022 -// #define BLDCFG_EHCI_SSID 0x78081022 -// #define BLDCFG_OHCI_SSID 0x78071022 -// #define BLDCFG_LPC_SSID 0x780E1022 -// #define BLDCFG_SD_SSID 0x78061022 -// #define BLDCFG_XHCI_SSID 0x78121022 -// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE -// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 -// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE - -CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, - { CPU_LIST_TERMINAL } -}; - -#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList - -//#include "KeralaInstall.h" - -/* Include the files that instantiate the configuration definitions. */ -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "CommonReturns.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -//#define DDR400_FREQUENCY 200 ///< DDR 400 -//#define DDR533_FREQUENCY 266 ///< DDR 533 -//#define DDR667_FREQUENCY 333 ///< DDR 667 -//#define DDR800_FREQUENCY 400 ///< DDR 800 -//#define DDR1066_FREQUENCY 533 ///< DDR 1066 -//#define DDR1333_FREQUENCY 667 ///< DDR 1333 -//#define DDR1600_FREQUENCY 800 ///< DDR 1600 -//#define DDR1866_FREQUENCY 933 ///< DDR 1866 -//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 -//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 -//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 -//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency -// -///* QUANDRANK_TYPE*/ -//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM -// -///* USER_MEMORY_TIMING_MODE */ -//#define TIMING_MODE_AUTO 0 ///< Use best rate possible -//#define TIMING_MODE_LIMITED 1 ///< Set user top limit -//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed -// -///* POWER_DOWN_MODE */ -//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 -#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 -#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 -#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 -#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 -#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 -#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 -#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 -#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 -#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 -#define DFLT_HPET_BASE_ADDRESS 0xFED00000 -#define DFLT_SMI_CMD_PORT 0xB0 -#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 -#define DFLT_GEC_BASE_ADDRESS 0xFED61000 -#define DFLT_AZALIA_SSID 0x780D1022 -#define DFLT_SMBUS_SSID 0x780B1022 -#define DFLT_IDE_SSID 0x780C1022 -#define DFLT_SATA_AHCI_SSID 0x78011022 -#define DFLT_SATA_IDE_SSID 0x78001022 -#define DFLT_SATA_RAID5_SSID 0x78031022 -#define DFLT_SATA_RAID_SSID 0x78021022 -#define DFLT_EHCI_SSID 0x78081022 -#define DFLT_OHCI_SSID 0x78071022 -#define DFLT_LPC_SSID 0x780E1022 -#define DFLT_SD_SSID 0x78061022 -#define DFLT_XHCI_SSID 0x78121022 -#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE -#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -#define DFLT_FCH_GPP_LINK_CONFIG PortA4 -#define DFLT_FCH_GPP_PORT0_PRESENT FALSE -#define DFLT_FCH_GPP_PORT1_PRESENT FALSE -#define DFLT_FCH_GPP_PORT2_PRESENT FALSE -#define DFLT_FCH_GPP_PORT3_PRESENT FALSE -#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE -//#define BLDCFG_IR_PIN_CONTROL 0x33 - -GPIO_CONTROL imba180_gpio[] = { - {183, Function1, GpioIn | GpioOutEnB | PullUpB}, - {-1} -}; -//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&imba180_gpio[0]) - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - #define SEED_A 0x12 - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - MOTHER_BOARD_LAYERS (LAYERS_4), - - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -// Customer table -UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); diff --git a/src/mainboard/asrock/imb-a180/cmos.layout b/src/mainboard/asrock/imb-a180/cmos.layout deleted file mode 100644 index f6b5806..0000000 --- a/src/mainboard/asrock/imb-a180/cmos.layout +++ /dev/null @@ -1,114 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asrock/imb-a180/devicetree.cb b/src/mainboard/asrock/imb-a180/devicetree.cb deleted file mode 100644 index 6d6875d..0000000 --- a/src/mainboard/asrock/imb-a180/devicetree.cb +++ /dev/null @@ -1,117 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2013 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family16kb/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family16kb - device lapic 0 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family16kb # CPU side of HT root complex - - chip northbridge/amd/agesa/family16kb # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIe Host Bridge - device pci 2.1 on end # x4 PCIe slot - device pci 2.2 on end # mPCIe slot - device pci 2.3 on end # Realtek NIC - device pci 2.4 on end # Edge Connector - device pci 2.5 on end # Edge Connector - end #chip northbridge/amd/agesa/family16kb - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on - chip superio/winbond/w83627uhg - device pnp 2e.0 off end # FDC - device pnp 2e.1 off end # LPT1 - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # KEYBRD - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # WDT - device pnp 2e.9 off end # GPIO - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HWMON - device pnp 2e.c off end # PECI - device pnp 2e.d on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.e on # COM5 - io 0x60 = 0x3e0 - irq 0x70 = 4 - end - device pnp 2e.f on # COM6 - io 0x60 = 0x2e0 - irq 0x70 = 3 - end - end # w83627uhg - end # LPC 0x439d - device pci 14.7 on end # SD - end #chip southbridge/amd/hudson - - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/asrock/imb-a180/dsdt.asl b/src/mainboard/asrock/imb-a180/dsdt.asl deleted file mode 100644 index cecaa59..0000000 --- a/src/mainboard/asrock/imb-a180/dsdt.asl +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> - - /* Describe the processor tree (_PR) */ - #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - /* System Bus */ - Scope(_SB) { /* Start _SB scope */ - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/fch.asl> - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> - - } /* End _SB scope */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/asrock/imb-a180/irq_tables.c b/src/mainboard/asrock/imb-a180/irq_tables.c deleted file mode 100644 index c1c25ba..0000000 --- a/src/mainboard/asrock/imb-a180/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam16.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asrock/imb-a180/mainboard.c b/src/mainboard/asrock/imb-a180/mainboard.c deleted file mode 100644 index ac40c84..0000000 --- a/src/mainboard/asrock/imb-a180/mainboard.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <arch/acpi.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <cpu/amd/agesa/s3_resume.h> -#include "agesawrapper.h" - -/********************************************** - * enable the dedicated function in mainboard. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - if (acpi_is_wakeup_s3()) - agesawrapper_fchs3earlyrestore(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asrock/imb-a180/mptable.c b/src/mainboard/asrock/imb-a180/mptable.c deleted file mode 100644 index d9ca7b7..0000000 --- a/src/mainboard/asrock/imb-a180/mptable.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam15.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ - - -u8 picr_data[0x54] = { - 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x03,0x04,0x05,0x07 -}; -u8 intr_data[0x54] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 byte; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - //mptable_write_buses(mc, NULL, &bus_isa); - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } -#if 0 - outb(0x0B, 0xCD6); - outb(0x02, 0xCD7); - - outb(0x50, 0xCD6); - outb(0x1F, 0xCD7); - - outb(0x48, 0xCD6); - outb(0xF2, 0xCD7); - - //outb(0xBE, 0xCD6); - //outb(0x52, 0xCD7); - - outb(0xED, 0xCD6); - outb(0x17, 0xCD7); - - *(volatile u8 *) (0xFED80D00 + 0x31) = 2; - *(volatile u8 *) (0xFED80D00 + 0x32) = 2; - *(volatile u8 *) (0xFED80D00 + 0x33) = 2; - *(volatile u8 *) (0xFED80D00 + 0x34) = 2; - - *(volatile u8 *) (0xFED80100 + 0x31) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x32) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x33) = 0xc8; - *(volatile u8 *) (0xFED80100 + 0x34) = 0xa0; - - *(volatile u8 *) (0xFED80D00 + 0x6c) = 1; - *(volatile u8 *) (0xFED80D00 + 0x6E) = 2; - *(volatile u8 *) (0xFED80D00 + 0x6f) = 2; - - *(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0; - *(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8; - *(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0; - - *(volatile u8 *) (0xFED80D00 + 0xA6) = 2; - *(volatile u8 *) (0xFED80100 + 0xA6) = 0; - - *(volatile u8 *) (0xFED80100 + 0x40) = 0xC8; -#endif - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asrock/imb-a180/romstage.c b/src/mainboard/asrock/imb-a180/romstage.c deleted file mode 100644 index cabcde8..0000000 --- a/src/mainboard/asrock/imb-a180/romstage.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/lapic.h" -#include "southbridge/amd/agesa/hudson/hudson.h" -#include "cpu/amd/agesa/s3_resume.h" -#include "cbmem.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627uhg/w83627uhg.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627UHG_SP1) - - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val, t32; - u32 *addr32; - - /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for - * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA - * even though the register is not documented in the Kabini BKDG. - * Otherwise the serial output is bad code. - */ - //outb(0xD2, 0xcd6); - //outb(0x00, 0xcd7); - - AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); - - hudson_lpc_port80(); - - /* Enable the AcpiMmio space */ - outb(0x24, 0xcd6); - outb(0x1, 0xcd7); - - /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ - addr32 = (u32 *)0xfed80e28; - t32 = *addr32; - t32 &= 0xfff8ffff; - *addr32 = t32; - - /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ - addr32 = (u32 *)0xfed80e40; - t32 = *addr32; - t32 &= 0xffffbffb; - *addr32 = t32; - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - post_code(0x31); - - /* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ - int i; - for(i = 0; i < 200000; i++) - val = inb(0xcd6); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - post_code(0x38); - printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); - - post_code(0x39); - - AGESAWRAPPER(amdinitearly); - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - AGESAWRAPPER(amdinitpost); - post_code(0x41); - AGESAWRAPPER(amdinitenv); - /* TODO: Disable cache is not ok. */ - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - outb(0xEA, 0xCD6); - outb(0x1, 0xcd7); - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/asrock/imb_a180/BiosCallOuts.c b/src/mainboard/asrock/imb_a180/BiosCallOuts.c new file mode 100644 index 0000000..53b6871 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/BiosCallOuts.c @@ -0,0 +1,337 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia.h> +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "Ids.h" +#include "OptionsIds.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "cbfs.h" +#include <stdlib.h> + +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * CODEC Initialization Table for Azalia HD Audio using Realtek ALC662 chip + */ +static const CODEC_ENTRY Alc662_VerbTbl[] = +{ + { 0x14, /*01014010*/ /* Port D - green headphone jack */ + (AZALIA_PINCFG_PORT_JACK << 30) + | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) + | (AZALIA_PINCFG_DEVICE_LINEOUT << 20) + | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) + | (AZALIA_PINCFG_COLOR_GREEN << 12) + | (1 << 4) + | (0 << 0) + }, + { 0x15, /*0x90170120*/ /* Port A - white speaker header */ + (AZALIA_PINCFG_PORT_FIXED << 30) + | (AZALIA_PINCFG_LOCATION_INTERNAL << 24) + | (AZALIA_PINCFG_DEVICE_SPEAKER << 20) + | (AZALIA_PINCFG_CONN_OTHER_ANALOG << 16) + | (AZALIA_PINCFG_COLOR_WHITE << 12) + | (AZALIA_PINCFG_MISC_IGNORE_PRESENCE << 8) + | (2 << 4) + | (0 << 0) + }, + { 0x16, 0x411111F0 }, /* Port G - not connected */ + { 0x18, /*0x01A19040*/ /* Port B - pink headphone jack */ + (AZALIA_PINCFG_PORT_JACK << 30) + | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) + | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) + | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) + | (AZALIA_PINCFG_COLOR_PINK << 12) + | (4 << 4) + | (0 << 0) + }, + { 0x19, /*0x02A19050*/ /* Port F - front panel header mic */ + (AZALIA_PINCFG_PORT_NC << 30) + | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) + | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) + | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) + | (AZALIA_PINCFG_COLOR_PINK << 12) + | (5 << 4) + | (0 << 0) + }, + { 0x1A, /*0x0181304F*/ /* Port C - NL blue headphone jack */ + (AZALIA_PINCFG_PORT_NC << 30) + | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) + | (AZALIA_PINCFG_DEVICE_LINEIN << 20) + | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) + | (AZALIA_PINCFG_COLOR_BLUE << 12) + | (4 << 4) + | (0xF << 0) + }, + { 0x1B, /*0x02214030*/ /* Port E - front panel line-out */ + (AZALIA_PINCFG_PORT_NC << 30) + | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24) + | (AZALIA_PINCFG_DEVICE_HP_OUT << 20) + | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) + | (AZALIA_PINCFG_COLOR_GREEN << 12) + | (3 << 4) + | (0 << 0) + }, + { 0x1C, 0x411111F0 }, /* CD-in - Not Connected */ + { 0x1D, 0x411111F0 }, /* PC Beep - Not Connected */ + { 0x1E, 0x411111F0 }, /* S/PDIF - Not connected */ + { 0xFF, 0xFFFFFFFF }, +}; + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0662, (CODEC_ENTRY*)Alc662_VerbTbl}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +#define FAN_INPUT_INTERNAL_DIODE 0 +#define FAN_INPUT_TEMP0 1 +#define FAN_INPUT_TEMP1 2 +#define FAN_INPUT_TEMP2 3 +#define FAN_INPUT_TEMP3 4 +#define FAN_INPUT_TEMP0_FILTER 5 +#define FAN_INPUT_ZERO 6 +#define FAN_INPUT_DISABLED 7 + +#define FAN_AUTOMODE (1 << 0) +#define FAN_LINEARMODE (1 << 1) +#define FAN_STEPMODE ~(1 << 1) +#define FAN_POLARITY_HIGH (1 << 2) +#define FAN_POLARITY_LOW ~(1 << 2) + +/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ +#define FREQ_28KHZ 0x0 +#define FREQ_25KHZ 0x1 +#define FREQ_23KHZ 0x2 +#define FREQ_21KHZ 0x3 +#define FREQ_29KHZ 0x4 +#define FREQ_18KHZ 0x5 +#define FREQ_100HZ 0xF7 +#define FREQ_87HZ 0xF8 +#define FREQ_58HZ 0xF9 +#define FREQ_44HZ 0xFA +#define FREQ_35HZ 0xFB +#define FREQ_29HZ 0xFC +#define FREQ_22HZ 0xFD +#define FREQ_14HZ 0xFE +#define FREQ_11HZ 0xFF + +/* imb_a180 Hardware Monitor Fan Control + * Hardware limitation: + * HWM failed to read the input temperture vi I2C, + * if other software switch the I2C switch by mistake or intention. + * We recommend to using IMC to control Fans, instead of HWM. + */ +#if 0 +static void oem_fan_control(FCH_DATA_BLOCK *FchParams) +{ + FCH_HWM_FAN_CTR oem_factl[5] = { + /* temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ + /* imb_a180 FanOUT0 Fan header J32 */ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + /* imb_a180 FanOUT1 Fan header J31*/ + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, + }; + LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); + + /* Enable IMC fan control. the recommand way */ +#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1) + /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ + + FchParams->Imc.ImcEnable = TRUE; + FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ + FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ + + LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); + + /* Thermal Zone Parameter */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2; + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0; + + /* IMC Fan Policy temperature thresholds */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; + + /* IMC Fan Policy PWM Settings */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */ + FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; + + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ + FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ + + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; + + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ + FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; + + /* IMC Function */ + FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8; + + /* NOTE: + * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, + * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. + * so we remove it from AGESA code. Please Seee FchInitLateHwm. + */ + +#else /* HWM fan control, the way not recommand */ + FchParams->Imc.ImcEnable = FALSE; + FchParams->Hwm.HwMonitorEnable = TRUE; + FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ + +#endif /* CONFIG_HUDSON_IMC_FWM */ +} +#endif + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, IMC etc. + */ +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; + + if (StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */ + FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_reset->FchReset.Xhci1Enable = FALSE; + } else if (StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST*)CodecTableList; + /* Azalia Controller Front Panel OEM Table Pointer */ + + /* Fan Control */ + //oem_fan_control(FchParams_env); + + /* XHCI configuration */ + FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_env->Usb.Xhci1Enable = FALSE; + + /* sata configuration */ + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/asrock/imb_a180/Kconfig b/src/mainboard/asrock/imb_a180/Kconfig new file mode 100644 index 0000000..e895797 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/Kconfig @@ -0,0 +1,92 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_ASROCK_IMB_A180 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY16_KB + select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB + select SOUTHBRIDGE_AMD_AGESA_YANGTZE + select SUPERIO_WINBOND_W83627UHG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default asrock/imb_a180 + +config MAINBOARD_PART_NUMBER + string + default "IMB-A180" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config ACPI_SSDTX_NUM + int + default 0 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config HUDSON_LEGACY_FREE + bool + default y + +# bit 1,0 - pin 0 +# bit 3,2 - pin 1 +# bit 5,4 - pin 2 +# bit 7,6 - pin 3 +config AZ_PIN + hex + default 0x2 + +endif # BOARD_ASROCK_IMB_A180 diff --git a/src/mainboard/asrock/imb_a180/Makefile.inc b/src/mainboard/asrock/imb_a180/Makefile.inc new file mode 100644 index 0000000..a83297a --- /dev/null +++ b/src/mainboard/asrock/imb_a180/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asrock/imb_a180/OptionsIds.h b/src/mainboard/asrock/imb_a180/OptionsIds.h new file mode 100644 index 0000000..0a1d328 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/OptionsIds.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asrock/imb_a180/PlatformGnbPcie.c b/src/mainboard/asrock/imb_a180/PlatformGnbPcie.c new file mode 100644 index 0000000..24d8381 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/PlatformGnbPcie.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +static const PCIe_PORT_DESCRIPTOR PortList [] = { + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x01, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x02, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */ + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x03, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x04, 0) + }, + /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */ + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1, + HotplugDisabled, + PcieGenMaxSupported, + PcieGenMaxSupported, + AspmDisabled, 0x05, 0) + } +}; + +static const PCIe_DDI_DESCRIPTOR DdiList [] = { + /* DP0 to HDMI0/DP */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) + }, + /* DP1 to FCH */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) + }, + /* DP2 to HDMI1/DP */ + { + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3) + }, +}; + +static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = { + .Flags = DESCRIPTOR_TERMINATE_LIST, + .SocketId = 0, + .PciePortList = PortList, + .DdiLinkList = DdiList +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This is the stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + /* GNB PCIe topology Porting */ + + /* */ + /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */ + /* */ + AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + /* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */ + ASSERT(FALSE); + return; + } + + PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader); + InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr; +} diff --git a/src/mainboard/asrock/imb_a180/PlatformGnbPcieComplex.h b/src/mainboard/asrock/imb_a180/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..1db8b2d --- /dev/null +++ b/src/mainboard/asrock/imb_a180/PlatformGnbPcieComplex.h @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asrock/imb_a180/acpi/AmdImc.asl b/src/mainboard/asrock/imb_a180/acpi/AmdImc.asl new file mode 100644 index 0000000..074dd7c --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/AmdImc.asl @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + While (LNotEqual(Local0, 0xFA)) { + Store(MRG0, Local0) + Sleep(10) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/asrock/imb_a180/acpi/gpe.asl b/src/mainboard/asrock/imb_a180/acpi/gpe.asl new file mode 100644 index 0000000..8d4f8a2 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/gpe.asl @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asrock/imb_a180/acpi/ide.asl b/src/mainboard/asrock/imb_a180/acpi/ide.asl new file mode 100644 index 0000000..853dc13 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/ide.asl @@ -0,0 +1,250 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No IDE functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + /* save total time of primary PIO master timing to PIO spd0 */ + Store(GTTM(PPTM), PSD0) + /* save total time of primary PIO slave Timing to PIO spd1 */ + Store(GTTM(PPTS), PSD1) + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} +#endif diff --git a/src/mainboard/asrock/imb_a180/acpi/mainboard.asl b/src/mainboard/asrock/imb_a180/acpi/mainboard.asl new file mode 100644 index 0000000..05523fb --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/mainboard.asl @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +/* AcpiGpe0Blk */ +OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04) + Field(GP0B, ByteAcc, NoLock, Preserve) { + , 11, + USBS, 1, +} diff --git a/src/mainboard/asrock/imb_a180/acpi/routing.asl b/src/mainboard/asrock/imb_a180/acpi/routing.asl new file mode 100644 index 0000000..a0a53d2 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/routing.asl @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F16 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + + /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* FCH devices */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + +}) + +Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 44 }, + Package(){0x0001FFFF, 1, 0, 45 }, + + /* Bus 0, Dev 2 - PCIe Bridges */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + + /* SB devices in APIC mode */ + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */ + /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + +}) + +Name(PS2, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS2, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GFX */ +Name(PS4, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, +}) + +/* GPP 0 */ +Name(PS5, Package(){ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, +}) +Name(APS5, Package(){ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, +}) + +/* GPP 1 */ +Name(PS6, Package(){ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, +}) +Name(APS6, Package(){ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, +}) + +/* GPP 2 */ +Name(PS7, Package(){ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, +}) +Name(APS7, Package(){ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) + +/* GPP 3 */ +Name(PS8, Package(){ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, +}) +Name(APS8, Package(){ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 18 }, +}) diff --git a/src/mainboard/asrock/imb_a180/acpi/sata.asl b/src/mainboard/asrock/imb_a180/acpi/sata.asl new file mode 100644 index 0000000..3d19222 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/sata.asl @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SATA functionality */ + +#if 0 +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} +#endif diff --git a/src/mainboard/asrock/imb_a180/acpi/si.asl b/src/mainboard/asrock/imb_a180/acpi/si.asl new file mode 100644 index 0000000..3cc2170 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/si.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/asrock/imb_a180/acpi/sleep.asl b/src/mainboard/asrock/imb_a180/acpi/sleep.asl new file mode 100644 index 0000000..2fc2efe --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/sleep.asl @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ + +External(_SB.APTS, MethodObj) +External(_SB.AWAK, MethodObj) + +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + Store(7, UPWS) + _SB.APTS(Arg0) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + Store(1,USBS) + + _SB.AWAK(Arg0) + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/asrock/imb_a180/acpi/superio.asl b/src/mainboard/asrock/imb_a180/acpi/superio.asl new file mode 100644 index 0000000..ec72e36 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asrock/imb_a180/acpi/thermal.asl b/src/mainboard/asrock/imb_a180/acpi/thermal.asl new file mode 100644 index 0000000..0466a1b --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/asrock/imb_a180/acpi/usb_oc.asl b/src/mainboard/asrock/imb_a180/acpi/usb_oc.asl new file mode 100644 index 0000000..7b5b1c6 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi/usb_oc.asl @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +/* USB Overcurrent GPEs */ + +#if 0 /* TODO: Update for imba180 */ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + } + } +} +#endif diff --git a/src/mainboard/asrock/imb_a180/acpi_tables.c b/src/mainboard/asrock/imb_a180/acpi_tables.c new file mode 100644 index 0000000..2c480c3 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/acpi_tables.c @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam16.h> + +#include "agesawrapper.h" + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + /* TODO: Remove the hardcode */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1, + 0xFEC20000, 24); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asrock/imb_a180/agesawrapper.c b/src/mainboard/asrock/imb_a180/agesawrapper.c new file mode 100644 index 0000000..5b8c97f --- /dev/null +++ b/src/mainboard/asrock/imb_a180/agesawrapper.c @@ -0,0 +1,654 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include <stdint.h> +#include <string.h> +#include <cpu/x86/mtrr.h> +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "cpuRegisters.h" +#include "cpuCacheInit.h" +#include "cpuApicUtilities.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "Dispatcher.h" +#include "cpuCacheInit.h" +#include "amdlib.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" +#include "heapManager.h" +#include "FchPlatform.h" +#include "Fch.h" +#include <cpu/amd/agesa/s3_resume.h> +#include <arch/io.h> +#include <device/device.h> +#include "hudson.h" + + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; +VOID *AcpiIvrs = NULL; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ +AGESA_STATUS agesawrapper_amdinitcpuio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* For serial port */ + PciData = 0xFF03FFD5; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + status = AmdInitPost (PostParams); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return Status; +} + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + + +AGESA_STATUS agesawrapper_amdinitresume(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_fchs3earlyrestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +AGESA_STATUS agesawrapper_amds3laterestore(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +AGESA_STATUS agesawrapper_fchs3laterestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +AGESA_STATUS agesawrapper_amdS3Save(void) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} + +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdreadeventlog ( + UINT8 HeapStatus + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/asrock/imb_a180/agesawrapper.h b/src/mainboard/asrock/imb_a180/agesawrapper.h new file mode 100644 index 0000000..acaa2b3 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/agesawrapper.h @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); +AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitcpuio(void); +void *agesawrapper_getlateinitptr (int pick); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); + +AGESA_STATUS agesawrapper_fchs3earlyrestore(void); +AGESA_STATUS agesawrapper_fchs3laterestore(void); + +#endif diff --git a/src/mainboard/asrock/imb_a180/board_info.txt b/src/mainboard/asrock/imb_a180/board_info.txt new file mode 100644 index 0000000..be1cde5 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/board_info.txt @@ -0,0 +1,6 @@ +Category: mini +Board URL: http://www.asrock.com/ipc/overview.asp?Model=IMB-A180 +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asrock/imb_a180/buildOpts.c b/src/mainboard/asrock/imb_a180/buildOpts.c new file mode 100644 index 0000000..55df22a --- /dev/null +++ b/src/mainboard/asrock/imb_a180/buildOpts.c @@ -0,0 +1,507 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> +#include "AGESA.h" +//#include "CommonReturns.h" +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +#define INSTALL_FT3_SOCKET_SUPPORT TRUE +#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE + +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE +#define INSTALL_FM2_SOCKET_SUPPORT FALSE + + +#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT + #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE + #undef INSTALL_FT3_SOCKET_SUPPORT + #define INSTALL_FT3_SOCKET_SUPPORT FALSE + #endif +#endif + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_CDIT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 15000 +#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000 +#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000 +#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_SLEW_RATE 10000 +#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE + +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the + // core for C-state entry requests. A value + // of 0 in this field specifies that the core + // does not trap any IO addresses for C-state entry. + // Values greater than 0xFFF8 results in undefined behavior. +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE TRUE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYNC_FLOOD TRUE +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled +#define BLDCFG_IOMMU_SUPPORT FALSE +#define OPTION_GFX_INIT_SVIEW FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife + +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL +#define BLDCFG_CFG_ABM_SUPPORT TRUE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +#ifdef PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20) +#endif + +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList + +//#include "KeralaInstall.h" + +/* Include the files that instantiate the configuration definitions. */ +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "CommonReturns.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +//#define DDR400_FREQUENCY 200 ///< DDR 400 +//#define DDR533_FREQUENCY 266 ///< DDR 533 +//#define DDR667_FREQUENCY 333 ///< DDR 667 +//#define DDR800_FREQUENCY 400 ///< DDR 800 +//#define DDR1066_FREQUENCY 533 ///< DDR 1066 +//#define DDR1333_FREQUENCY 667 ///< DDR 1333 +//#define DDR1600_FREQUENCY 800 ///< DDR 1600 +//#define DDR1866_FREQUENCY 933 ///< DDR 1866 +//#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +//#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +//#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency +// +///* QUANDRANK_TYPE*/ +//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM +// +///* USER_MEMORY_TIMING_MODE */ +//#define TIMING_MODE_AUTO 0 ///< Use best rate possible +//#define TIMING_MODE_LIMITED 1 ///< Set user top limit +//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed +// +///* POWER_DOWN_MODE */ +//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA4 +#define DFLT_FCH_GPP_PORT0_PRESENT FALSE +#define DFLT_FCH_GPP_PORT1_PRESENT FALSE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 + +GPIO_CONTROL imba180_gpio[] = { + {183, Function1, GpioIn | GpioOutEnB | PullUpB}, + {-1} +}; +//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&imba180_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + #define SEED_A 0x12 + HW_RXEN_SEED( + ANY_SOCKET, CHANNEL_A, ALL_DIMMS, + SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, + SEED_A), + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + MOTHER_BOARD_LAYERS (LAYERS_4), + + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */ + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00), + + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +// Customer table +UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); diff --git a/src/mainboard/asrock/imb_a180/cmos.layout b/src/mainboard/asrock/imb_a180/cmos.layout new file mode 100644 index 0000000..f6b5806 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asrock/imb_a180/devicetree.cb b/src/mainboard/asrock/imb_a180/devicetree.cb new file mode 100644 index 0000000..6d6875d --- /dev/null +++ b/src/mainboard/asrock/imb_a180/devicetree.cb @@ -0,0 +1,117 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family16kb/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family16kb + device lapic 0 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + + chip northbridge/amd/agesa/family16kb # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x9804 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # x4 PCIe slot + device pci 2.2 on end # mPCIe slot + device pci 2.3 on end # Realtek NIC + device pci 2.4 on end # Edge Connector + device pci 2.5 on end # Edge Connector + end #chip northbridge/amd/agesa/family16kb + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on + chip superio/winbond/w83627uhg + device pnp 2e.0 off end # FDC + device pnp 2e.1 off end # LPT1 + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # KEYBRD + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # WDT + device pnp 2e.9 off end # GPIO + device pnp 2e.a off end # ACPI + device pnp 2e.b off end # HWMON + device pnp 2e.c off end # PECI + device pnp 2e.d on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.e on # COM5 + io 0x60 = 0x3e0 + irq 0x70 = 4 + end + device pnp 2e.f on # COM6 + io 0x60 = 0x2e0 + irq 0x70 = 3 + end + end # w83627uhg + end # LPC 0x439d + device pci 14.7 on end # SD + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family16kb/root_complex diff --git a/src/mainboard/asrock/imb_a180/dsdt.asl b/src/mainboard/asrock/imb_a180/dsdt.asl new file mode 100644 index 0000000..cecaa59 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/dsdt.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/family16kb/acpi/cpu.asl> + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + /* System Bus */ + Scope(_SB) { /* Start _SB scope */ + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End _SB scope */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/asrock/imb_a180/irq_tables.c b/src/mainboard/asrock/imb_a180/irq_tables.c new file mode 100644 index 0000000..c1c25ba --- /dev/null +++ b/src/mainboard/asrock/imb_a180/irq_tables.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam16.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asrock/imb_a180/mainboard.c b/src/mainboard/asrock/imb_a180/mainboard.c new file mode 100644 index 0000000..ac40c84 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/mainboard.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "agesawrapper.h" + +/********************************************** + * enable the dedicated function in mainboard. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + if (acpi_is_wakeup_s3()) + agesawrapper_fchs3earlyrestore(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asrock/imb_a180/mptable.c b/src/mainboard/asrock/imb_a180/mptable.c new file mode 100644 index 0000000..d9ca7b7 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/mptable.c @@ -0,0 +1,234 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam15.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + + +u8 picr_data[0x54] = { + 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x03,0x04,0x05,0x07 +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + smp_write_ioapic(mc, ioapic_id+1, 0x21, 0xFEC20000); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } +#if 0 + outb(0x0B, 0xCD6); + outb(0x02, 0xCD7); + + outb(0x50, 0xCD6); + outb(0x1F, 0xCD7); + + outb(0x48, 0xCD6); + outb(0xF2, 0xCD7); + + //outb(0xBE, 0xCD6); + //outb(0x52, 0xCD7); + + outb(0xED, 0xCD6); + outb(0x17, 0xCD7); + + *(volatile u8 *) (0xFED80D00 + 0x31) = 2; + *(volatile u8 *) (0xFED80D00 + 0x32) = 2; + *(volatile u8 *) (0xFED80D00 + 0x33) = 2; + *(volatile u8 *) (0xFED80D00 + 0x34) = 2; + + *(volatile u8 *) (0xFED80100 + 0x31) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x32) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x33) = 0xc8; + *(volatile u8 *) (0xFED80100 + 0x34) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0x6c) = 1; + *(volatile u8 *) (0xFED80D00 + 0x6E) = 2; + *(volatile u8 *) (0xFED80D00 + 0x6f) = 2; + + *(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0; + *(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8; + *(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0; + + *(volatile u8 *) (0xFED80D00 + 0xA6) = 2; + *(volatile u8 *) (0xFED80100 + 0xA6) = 0; + + *(volatile u8 *) (0xFED80100 + 0x40) = 0xC8; +#endif + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asrock/imb_a180/romstage.c b/src/mainboard/asrock/imb_a180/romstage.c new file mode 100644 index 0000000..cabcde8 --- /dev/null +++ b/src/mainboard/asrock/imb_a180/romstage.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/lapic.h" +#include "southbridge/amd/agesa/hudson/hudson.h" +#include "cpu/amd/agesa/s3_resume.h" +#include "cbmem.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627uhg/w83627uhg.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627UHG_SP1) + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val, t32; + u32 *addr32; + + /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for + * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA + * even though the register is not documented in the Kabini BKDG. + * Otherwise the serial output is bad code. + */ + //outb(0xD2, 0xcd6); + //outb(0x00, 0xcd7); + + AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); + + hudson_lpc_port80(); + + /* Enable the AcpiMmio space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */ + addr32 = (u32 *)0xfed80e28; + t32 = *addr32; + t32 &= 0xfff8ffff; + *addr32 = t32; + + /* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */ + addr32 = (u32 *)0xfed80e40; + t32 = *addr32; + t32 &= 0xffffbffb; + *addr32 = t32; + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + post_code(0x31); + + /* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ + int i; + for(i = 0; i < 200000; i++) + val = inb(0xcd6); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + post_code(0x38); + printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); + + post_code(0x39); + + AGESAWRAPPER(amdinitearly); + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + AGESAWRAPPER(amdinitpost); + post_code(0x41); + AGESAWRAPPER(amdinitenv); + /* TODO: Disable cache is not ok. */ + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + outb(0xEA, 0xCD6); + outb(0x1, 0xcd7); + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/asus/Kconfig b/src/mainboard/asus/Kconfig index ba56b6e..4b90fb7 100644 --- a/src/mainboard/asus/Kconfig +++ b/src/mainboard/asus/Kconfig @@ -69,25 +69,25 @@ endchoice
source "src/mainboard/asus/a8n_e/Kconfig" source "src/mainboard/asus/a8n_sli/Kconfig" -source "src/mainboard/asus/a8v-e_se/Kconfig" -source "src/mainboard/asus/a8v-e_deluxe/Kconfig" -source "src/mainboard/asus/f2a85-m/Kconfig" -source "src/mainboard/asus/k8v-x/Kconfig" -source "src/mainboard/asus/m2n-e/Kconfig" +source "src/mainboard/asus/a8v_e_se/Kconfig" +source "src/mainboard/asus/a8v_e_deluxe/Kconfig" +source "src/mainboard/asus/f2a85_m/Kconfig" +source "src/mainboard/asus/k8v_x/Kconfig" +source "src/mainboard/asus/m2n_e/Kconfig" source "src/mainboard/asus/m2v/Kconfig" -source "src/mainboard/asus/m2v-mx_se/Kconfig" -source "src/mainboard/asus/m4a785-m/Kconfig" -source "src/mainboard/asus/m4a785t-m/Kconfig" -source "src/mainboard/asus/m4a78-em/Kconfig" -source "src/mainboard/asus/m5a88-v/Kconfig" -source "src/mainboard/asus/mew-am/Kconfig" -source "src/mainboard/asus/mew-vm/Kconfig" +source "src/mainboard/asus/m2v_mx_se/Kconfig" +source "src/mainboard/asus/m4a785_m/Kconfig" +source "src/mainboard/asus/m4a785t_m/Kconfig" +source "src/mainboard/asus/m4a78_em/Kconfig" +source "src/mainboard/asus/m5a88_v/Kconfig" +source "src/mainboard/asus/mew_am/Kconfig" +source "src/mainboard/asus/mew_vm/Kconfig" source "src/mainboard/asus/p2b/Kconfig" -source "src/mainboard/asus/p2b-d/Kconfig" -source "src/mainboard/asus/p2b-ds/Kconfig" -source "src/mainboard/asus/p2b-f/Kconfig" -source "src/mainboard/asus/p2b-ls/Kconfig" -source "src/mainboard/asus/p3b-f/Kconfig" +source "src/mainboard/asus/p2b_d/Kconfig" +source "src/mainboard/asus/p2b_ds/Kconfig" +source "src/mainboard/asus/p2b_f/Kconfig" +source "src/mainboard/asus/p2b_ls/Kconfig" +source "src/mainboard/asus/p3b_f/Kconfig" source "src/mainboard/asus/dsbf/Kconfig"
config MAINBOARD_VENDOR diff --git a/src/mainboard/asus/a8v-e_deluxe/Kconfig b/src/mainboard/asus/a8v-e_deluxe/Kconfig deleted file mode 100644 index a1533c4..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -if BOARD_ASUS_A8V_E_DELUXE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 - select SUPERIO_WINBOND_W83627EHG - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/a8v-e_deluxe - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "A8V-E Deluxe" - -config HW_MEM_HOLE_SIZEK - hex - default 0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HEAP_SIZE - hex - default 0x40000 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -endif # BOARD_ASUS_A8V_E_DELUXE diff --git a/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c b/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c deleted file mode 100644 index b86e4d2..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/acpi_tables.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/a8v-e_deluxe/board_info.txt b/src/mainboard/asus/a8v-e_deluxe/board_info.txt deleted file mode 100644 index 8246100..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/ -ROM package: PLCC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/a8v-e_deluxe/cmos.layout b/src/mainboard/asus/a8v-e_deluxe/cmos.layout deleted file mode 100644 index 0afe66a..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb b/src/mainboard/asus/a8v-e_deluxe/devicetree.cb deleted file mode 100644 index 5e56acc..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/devicetree.cb +++ /dev/null @@ -1,97 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/a8v-e_deluxe/dsdt.asl b/src/mainboard/asus/a8v-e_deluxe/dsdt.asl deleted file mode 100644 index 8f1e197..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/dsdt.asl +++ /dev/null @@ -1,204 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - /* PCI Routing Table */ - /* aaa */ - Name (_PRT, Package () { - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00030001) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, - }) - } - - Device (PEX2) - { - Name (_ADR, 0x00030002) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, - }) - } - - Device (PEX3) - { - Name (_ADR, 0x00030003) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, - }) - } - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - } - } -} diff --git a/src/mainboard/asus/a8v-e_deluxe/mptable.c b/src/mainboard/asus/a8v-e_deluxe/mptable.c deleted file mode 100644 index 71e0e1e..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/mptable.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c deleted file mode 100644 index c137b14..0000000 --- a/src/mainboard/asus/a8v-e_deluxe/romstage.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include "southbridge/via/vt8237r/early_smbus.c" -#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) -#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) -#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - print_debug("soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - while (1) { - /* daisy daisy ... */ - hlt(); - } -} - -#include "southbridge/via/k8t890/early_car.c" -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - device_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_ext_func_mode(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); - /* We have GPIO for KB/MS pin. */ - reg = pnp_read_config(SERIAL_DEV, 0x2a); - pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); - /* We have all RESTOUT and even some reserved bits, too. */ - reg = pnp_read_config(SERIAL_DEV, 0x2c); - pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); - pnp_exit_ext_func_mode(SERIAL_DEV); - - pnp_enter_ext_func_mode(ACPI_DEV); - pnp_set_logical_device(ACPI_DEV); - /* - * Set the delay rising time from PWROK_LP to PWROK_ST to - * 300 - 600ms, and 0 to vice versa. - */ - reg = pnp_read_config(ACPI_DEV, 0xe6); - pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); - /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ - reg = pnp_read_config(ACPI_DEV, 0xe4); - pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); - pnp_exit_ext_func_mode(ACPI_DEV); - - pnp_enter_ext_func_mode(GPIO_DEV); - pnp_set_logical_device(GPIO_DEV); - /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ - pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ - pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ - pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ - pnp_exit_ext_func_mode(GPIO_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - print_info("now booting... romstage\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - print_info("now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - print_info("now booting... Core0 started\n"); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - print_debug("ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); -} diff --git a/src/mainboard/asus/a8v-e_se/Kconfig b/src/mainboard/asus/a8v-e_se/Kconfig deleted file mode 100644 index dcc75fa..0000000 --- a/src/mainboard/asus/a8v-e_se/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -if BOARD_ASUS_A8V_E_SE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_939 - select K8_HT_FREQ_1G_SUPPORT - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 - select SUPERIO_WINBOND_W83627EHG - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/a8v-e_se - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "A8V-E SE" - -config HW_MEM_HOLE_SIZEK - hex - default 0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HEAP_SIZE - hex - default 0x40000 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -endif # BOARD_ASUS_A8V_E_SE diff --git a/src/mainboard/asus/a8v-e_se/acpi_tables.c b/src/mainboard/asus/a8v-e_se/acpi_tables.c deleted file mode 100644 index c0d0862..0000000 --- a/src/mainboard/asus/a8v-e_se/acpi_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/a8v-e_se/board_info.txt b/src/mainboard/asus/a8v-e_se/board_info.txt deleted file mode 100644 index c554519..0000000 --- a/src/mainboard/asus/a8v-e_se/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/a8v-e_se/cmos.layout b/src/mainboard/asus/a8v-e_se/cmos.layout deleted file mode 100644 index 0afe66a..0000000 --- a/src/mainboard/asus/a8v-e_se/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/a8v-e_se/devicetree.cb b/src/mainboard/asus/a8v-e_se/devicetree.cb deleted file mode 100644 index f2d078a..0000000 --- a/src/mainboard/asus/a8v-e_se/devicetree.cb +++ /dev/null @@ -1,97 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_939 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # PS/2 keyboard & mouse (off) - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 on # GPIO 5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/a8v-e_se/dsdt.asl b/src/mainboard/asus/a8v-e_se/dsdt.asl deleted file mode 100644 index 5f98168..0000000 --- a/src/mainboard/asus/a8v-e_se/dsdt.asl +++ /dev/null @@ -1,249 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00030001) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, - }) - } - - Device (PEX2) - { - Name (_ADR, 0x00030002) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, - }) - } - - Device (PEX3) - { - Name (_ADR, 0x00030003) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, - }) - } - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - } - } -} diff --git a/src/mainboard/asus/a8v-e_se/mptable.c b/src/mainboard/asus/a8v-e_se/mptable.c deleted file mode 100644 index 71e0e1e..0000000 --- a/src/mainboard/asus/a8v-e_se/mptable.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c deleted file mode 100644 index 5c78ab1..0000000 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include "southbridge/via/vt8237r/early_smbus.c" -#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) -#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) -#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - print_debug("soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - while (1) { - /* daisy daisy ... */ - hlt(); - } -} - -#include "southbridge/via/k8t890/early_car.c" -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - device_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_ext_func_mode(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); - /* We have GPIO for KB/MS pin. */ - reg = pnp_read_config(SERIAL_DEV, 0x2a); - pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); - /* We have all RESTOUT and even some reserved bits, too. */ - reg = pnp_read_config(SERIAL_DEV, 0x2c); - pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); - pnp_exit_ext_func_mode(SERIAL_DEV); - - pnp_enter_ext_func_mode(ACPI_DEV); - pnp_set_logical_device(ACPI_DEV); - /* - * Set the delay rising time from PWROK_LP to PWROK_ST to - * 300 - 600ms, and 0 to vice versa. - */ - reg = pnp_read_config(ACPI_DEV, 0xe6); - pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); - /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ - reg = pnp_read_config(ACPI_DEV, 0xe4); - pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); - pnp_exit_ext_func_mode(ACPI_DEV); - - pnp_enter_ext_func_mode(GPIO_DEV); - pnp_set_logical_device(GPIO_DEV); - /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ - pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ - pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ - pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */ - pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ - pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ - pnp_exit_ext_func_mode(GPIO_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - 0, 0, 0, 0, - // Node 1 - DIMM1, DIMM3, 0, 0, - 0, 0, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - print_info("now booting... fallback\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - print_info("now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - print_info("now booting... Core0 started\n"); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - print_debug("ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); -} diff --git a/src/mainboard/asus/a8v_e_deluxe/Kconfig b/src/mainboard/asus/a8v_e_deluxe/Kconfig new file mode 100644 index 0000000..497147f --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/Kconfig @@ -0,0 +1,68 @@ +if BOARD_ASUS_A8V_E_DELUXE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_939 + select K8_HT_FREQ_1G_SUPPORT + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_VIA_VT8237R + select SOUTHBRIDGE_VIA_K8T890 + select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 + select SUPERIO_WINBOND_W83627EHG + select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select RAMINIT_SYSINFO + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default asus/a8v_e_deluxe + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x4000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "A8V-E Deluxe" + +config HW_MEM_HOLE_SIZEK + hex + default 0 + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HEAP_SIZE + hex + default 0x40000 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +endif # BOARD_ASUS_A8V_E_DELUXE diff --git a/src/mainboard/asus/a8v_e_deluxe/acpi_tables.c b/src/mainboard/asus/a8v_e_deluxe/acpi_tables.c new file mode 100644 index 0000000..b86e4d2 --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/acpi_tables.c @@ -0,0 +1,69 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" +#include <cpu/amd/amdk8_sysconf.h> + +void get_bus_conf(void) +{ + /* FIXME: implement this. */ +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/asus/a8v_e_deluxe/board_info.txt b/src/mainboard/asus/a8v_e_deluxe/board_info.txt new file mode 100644 index 0000000..8246100 --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/ +ROM package: PLCC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/a8v_e_deluxe/cmos.layout b/src/mainboard/asus/a8v_e_deluxe/cmos.layout new file mode 100644 index 0000000..0afe66a --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/a8v_e_deluxe/devicetree.cb b/src/mainboard/asus/a8v_e_deluxe/devicetree.cb new file mode 100644 index 0000000..5e56acc --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/devicetree.cb @@ -0,0 +1,97 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # PS/2 keyboard & mouse (off) + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 on # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 on # GPIO 5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/a8v_e_deluxe/dsdt.asl b/src/mainboard/asus/a8v_e_deluxe/dsdt.asl new file mode 100644 index 0000000..8f1e197 --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/dsdt.asl @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + /* aaa */ + Name (_PRT, Package () { + Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ + Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ + Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ + Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ + Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, + Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ + }) + + Device (PEGG) + { + Name (_ADR, 0x00020000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, + }) + } + + Device (PEX0) + { + Name (_ADR, 0x00030000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, + }) + } + + Device (PEX1) + { + Name (_ADR, 0x00030001) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, + }) + } + + Device (PEX2) + { + Name (_ADR, 0x00030002) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, + }) + } + + Device (PEX3) + { + Name (_ADR, 0x00030003) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, + }) + } + + Device (ISA) { + Name (_ADR, 0x00110000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + } + } +} diff --git a/src/mainboard/asus/a8v_e_deluxe/mptable.c b/src/mainboard/asus/a8v_e_deluxe/mptable.c new file mode 100644 index 0000000..71e0e1e --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/mptable.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <stdint.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); + smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); + + mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/a8v_e_deluxe/romstage.c b/src/mainboard/asus/a8v_e_deluxe/romstage.c new file mode 100644 index 0000000..c137b14 --- /dev/null +++ b/src/mainboard/asus/a8v_e_deluxe/romstage.c @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include "southbridge/via/vt8237r/early_smbus.c" +#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) +#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include <reset.h> +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset\n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +#include "southbridge/via/k8t890/early_car.c" +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +static void sio_init(void) +{ + u8 reg; + + pnp_enter_ext_func_mode(SERIAL_DEV); + /* We have 24MHz input. */ + reg = pnp_read_config(SERIAL_DEV, 0x24); + pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); + /* We have GPIO for KB/MS pin. */ + reg = pnp_read_config(SERIAL_DEV, 0x2a); + pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); + /* We have all RESTOUT and even some reserved bits, too. */ + reg = pnp_read_config(SERIAL_DEV, 0x2c); + pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); + pnp_exit_ext_func_mode(SERIAL_DEV); + + pnp_enter_ext_func_mode(ACPI_DEV); + pnp_set_logical_device(ACPI_DEV); + /* + * Set the delay rising time from PWROK_LP to PWROK_ST to + * 300 - 600ms, and 0 to vice versa. + */ + reg = pnp_read_config(ACPI_DEV, 0xe6); + pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); + /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ + reg = pnp_read_config(ACPI_DEV, 0xe4); + pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); + pnp_exit_ext_func_mode(ACPI_DEV); + + pnp_enter_ext_func_mode(GPIO_DEV); + pnp_set_logical_device(GPIO_DEV); + /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ + pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ + pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ + pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ + pnp_exit_ext_func_mode(GPIO_DEV); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = &sysinfo_car; + + sio_init(); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + enable_rom_decode(); + + print_info("now booting... romstage\n"); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + } + + print_info("now booting... real_main\n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + print_info("now booting... Core0 started\n"); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= k8t890_early_setup_ht(); + + if (needs_reset) { + print_debug("ht reset -\n"); + soft_reset(); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + enable_fid_change(); + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/a8v_e_se/Kconfig b/src/mainboard/asus/a8v_e_se/Kconfig new file mode 100644 index 0000000..d9231f4 --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/Kconfig @@ -0,0 +1,68 @@ +if BOARD_ASUS_A8V_E_SE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_939 + select K8_HT_FREQ_1G_SUPPORT + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_VIA_VT8237R + select SOUTHBRIDGE_VIA_K8T890 + select SOUTHBRIDGE_VIA_SUBTYPE_K8T890 + select SUPERIO_WINBOND_W83627EHG + select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select RAMINIT_SYSINFO + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default asus/a8v_e_se + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x4000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "A8V-E SE" + +config HW_MEM_HOLE_SIZEK + hex + default 0 + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HEAP_SIZE + hex + default 0x40000 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +endif # BOARD_ASUS_A8V_E_SE diff --git a/src/mainboard/asus/a8v_e_se/acpi_tables.c b/src/mainboard/asus/a8v_e_se/acpi_tables.c new file mode 100644 index 0000000..c0d0862 --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/acpi_tables.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" +#include "northbridge/amd/amdk8/acpi.h" +#include <cpu/amd/powernow.h> +#include <cpu/amd/amdk8_sysconf.h> + +void get_bus_conf(void) +{ + /* FIXME: implement this. */ +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/asus/a8v_e_se/board_info.txt b/src/mainboard/asus/a8v_e_se/board_info.txt new file mode 100644 index 0000000..c554519 --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/ +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/a8v_e_se/cmos.layout b/src/mainboard/asus/a8v_e_se/cmos.layout new file mode 100644 index 0000000..0afe66a --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/a8v_e_se/devicetree.cb b/src/mainboard/asus/a8v_e_se/devicetree.cb new file mode 100644 index 0000000..f2d078a --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/devicetree.cb @@ -0,0 +1,97 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_939 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # PS/2 keyboard & mouse (off) + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 on # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 on # GPIO 5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/a8v_e_se/dsdt.asl b/src/mainboard/asus/a8v_e_se/dsdt.asl new file mode 100644 index 0000000..5f98168 --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/dsdt.asl @@ -0,0 +1,249 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ + Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ + Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ + Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ + Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, + Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ + }) + + Device (PEGG) + { + Name (_ADR, 0x00020000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, + }) + } + + Device (PEX0) + { + Name (_ADR, 0x00030000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, + }) + } + + Device (PEX1) + { + Name (_ADR, 0x00030001) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, + }) + } + + Device (PEX2) + { + Name (_ADR, 0x00030002) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, + }) + } + + Device (PEX3) + { + Name (_ADR, 0x00030003) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, + }) + } + + Device (ISA) { + Name (_ADR, 0x00110000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + /* Dummy device to hold auto generated reserved resources */ + Device(MBRS) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + External(_CRS) /* Resource Template in SSDT */ + } + + } + } +} diff --git a/src/mainboard/asus/a8v_e_se/mptable.c b/src/mainboard/asus/a8v_e_se/mptable.c new file mode 100644 index 0000000..71e0e1e --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/mptable.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <stdint.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); + smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); + + mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/a8v_e_se/romstage.c b/src/mainboard/asus/a8v_e_se/romstage.c new file mode 100644 index 0000000..5c78ab1 --- /dev/null +++ b/src/mainboard/asus/a8v_e_se/romstage.c @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include "southbridge/via/vt8237r/early_smbus.c" +#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED_V) +#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include <reset.h> +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset\n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +#include "southbridge/via/k8t890/early_car.c" +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +static void sio_init(void) +{ + u8 reg; + + pnp_enter_ext_func_mode(SERIAL_DEV); + /* We have 24MHz input. */ + reg = pnp_read_config(SERIAL_DEV, 0x24); + pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); + /* We have GPIO for KB/MS pin. */ + reg = pnp_read_config(SERIAL_DEV, 0x2a); + pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); + /* We have all RESTOUT and even some reserved bits, too. */ + reg = pnp_read_config(SERIAL_DEV, 0x2c); + pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); + pnp_exit_ext_func_mode(SERIAL_DEV); + + pnp_enter_ext_func_mode(ACPI_DEV); + pnp_set_logical_device(ACPI_DEV); + /* + * Set the delay rising time from PWROK_LP to PWROK_ST to + * 300 - 600ms, and 0 to vice versa. + */ + reg = pnp_read_config(ACPI_DEV, 0xe6); + pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); + /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ + reg = pnp_read_config(ACPI_DEV, 0xe4); + pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); + pnp_exit_ext_func_mode(ACPI_DEV); + + pnp_enter_ext_func_mode(GPIO_DEV); + pnp_set_logical_device(GPIO_DEV); + /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ + pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ + pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ + pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ + pnp_exit_ext_func_mode(GPIO_DEV); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + 0, 0, 0, 0, + // Node 1 + DIMM1, DIMM3, 0, 0, + 0, 0, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = &sysinfo_car; + + sio_init(); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + enable_rom_decode(); + + print_info("now booting... fallback\n"); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + } + + print_info("now booting... real_main\n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + print_info("now booting... Core0 started\n"); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= k8t890_early_setup_ht(); + + if (needs_reset) { + print_debug("ht reset -\n"); + soft_reset(); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + enable_fid_change(); + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/f2a85-m/BiosCallOuts.c b/src/mainboard/asus/f2a85-m/BiosCallOuts.c deleted file mode 100644 index 13bee0c..0000000 --- a/src/mainboard/asus/f2a85-m/BiosCallOuts.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "OptionsIds.h" - -#include <cbfs.h> -#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> -#include <stdlib.h> - -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, - {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, - {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/** - * ASUS F2A85-M board ALC887-VD Verb Table - * - * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running - * the vendor BIOS. - */ -const CODEC_ENTRY f2a85_m_alc887_VerbTbl[] = { - {0x11, 0x99430140}, - {0x12, 0x411111f0}, - {0x14, 0x01014010}, - {0x15, 0x01011012}, - {0x16, 0x01016011}, - {0x17, 0x01012014}, - {0x18, 0x01a19850}, - {0x19, 0x02a19c60}, - {0x1a, 0x0181305f}, - {0x1b, 0x02214c20}, - {0x1c, 0x411111f0}, - {0x1d, 0x4005e601}, - {0x1e, 0x01456130}, - {0x1f, 0x411111f0}, - {0xff, 0xffffffff} -}; - -static const CODEC_TBL_LIST CodecTableList[] = -{ - {0x10ec0887, (CODEC_ENTRY*)&f2a85_m_alc887_VerbTbl[0]}, - {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} -}; - -/** - * Fch Oem setting callback - * - * Configure platform specific Hudson device, - * such Azalia, SATA, GEC, IMC etc. - */ -static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) -{ - AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; - - if (StdHeader->Func == AMD_INIT_RESET) { - FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); - FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE); - FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_reset->FchReset.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - } else if (StdHeader->Func == AMD_INIT_ENV) { - FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; - printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); - - /* Azalia Controller OEM Codec Table Pointer */ - FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); - /* Azalia Controller Front Panel OEM Table Pointer */ - FchParams_env->Imc.ImcEnable = FALSE; - FchParams_env->Hwm.HwMonitorEnable = FALSE; - FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ - - /* XHCI configuration */ - FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - FchParams_env->Usb.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); - } - printk(BIOS_DEBUG, "Done\n"); - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/asus/f2a85-m/Kconfig b/src/mainboard/asus/f2a85-m/Kconfig deleted file mode 100644 index 6dea246..0000000 --- a/src/mainboard/asus/f2a85-m/Kconfig +++ /dev/null @@ -1,109 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# Copyright (C) 2012 Rudolf Marek r.marek@assembler.cz -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_ASUS_F2A85_M - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY15_TN - select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN - select SOUTHBRIDGE_AMD_AGESA_HUDSON - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select SUPERIO_ITE_IT8728F - select BOARD_ROMSIZE_KB_8192 - select GFXUMA - -choice - prompt "DDR3 memory voltage" - default BOARD_ASUS_F2A85_M_DDR3_VOLT_150 - -config BOARD_ASUS_F2A85_M_DDR3_VOLT_135 - bool "1.35V" - help - Set DRR3 memory voltage to 1.35V -config BOARD_ASUS_F2A85_M_DDR3_VOLT_150 - bool "1.50V" - help - Set DRR3 memory voltage to 1.50V -config BOARD_ASUS_F2A85_M_DDR3_VOLT_165 - bool "1.65V" - help - Set DRR3 memory voltage to 1.65V -endchoice - -config BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL - hex - default 0x9e if BOARD_ASUS_F2A85_M_DDR3_VOLT_135 - default 0x0 if BOARD_ASUS_F2A85_M_DDR3_VOLT_150 - default 0x1e if BOARD_ASUS_F2A85_M_DDR3_VOLT_165 - -config MAINBOARD_DIR - string - default asus/f2a85-m - -config MAINBOARD_PART_NUMBER - string - default "F2A85-M" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 4 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS_ID - string - default "1002,9993" - -config HUDSON_LEGACY_FREE - bool - default y - -endif # BOARD_ASUS_F2A85_M diff --git a/src/mainboard/asus/f2a85-m/Makefile.inc b/src/mainboard/asus/f2a85-m/Makefile.inc deleted file mode 100644 index 3103f70..0000000 --- a/src/mainboard/asus/f2a85-m/Makefile.inc +++ /dev/null @@ -1,28 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asus/f2a85-m/OptionsIds.h b/src/mainboard/asus/f2a85-m/OptionsIds.h deleted file mode 100644 index bf7eedc..0000000 --- a/src/mainboard/asus/f2a85-m/OptionsIds.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -//#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_CONTROL_ENABLED TRUE -#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE -//#define IDSOPT_PERF_ANALYSIS TRUE -#define IDSOPT_ASSERT_ENABLED TRUE -//#undef IDSOPT_DEBUG_ENABLED -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c b/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c deleted file mode 100644 index ee5b5ff..0000000 --- a/src/mainboard/asus/f2a85-m/PlatformGnbPcie.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "PlatformGnbPcieComplex.h" - -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> - -#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE - -/* - * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping) - * - * Lane Id - * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8 - * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8 - * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8 - * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8 - * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7 - * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7 - * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7 - * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7 - * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI - * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI - * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI - * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI - * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI - * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI - * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI - * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI - * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI - * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI - * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI - * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI - * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI - * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI - * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI - * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI - * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs) - * 25 DP0_TX[P,N]1 - * 26 DP0_TX[P,N]2 - * 27 DP0_TX[P,N]3 - * 28 DP1_TX[P,N]0 - * 29 DP1_TX[P,N]1 - * 30 DP1_TX[P,N]2 - * 31 DP1_TX[P,N]3 - * 32 DP2_TX[P,N]0 - * 33 DP2_TX[P,N]1 - * 34 DP2_TX[P,N]2 - * 35 DP2_TX[P,N]3 - * 36 DP2_TX[P,N]4 - * 37 DP2_TX[P,N]5 - * 38 DP2_TX[P,N]6 - */ - -PCIe_PORT_DESCRIPTOR PortList [] = { - /* PCIe port, Lanes 8:23, PCI Device Number 2, blue x16 slot */ - { - 0, /* Descriptor flags */ - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23), - PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) - }, - /* PCIe port, Lanes 4:7, PCI Device Number 4, black x16 slot (in fact x4) */ - { - 0, /* Descriptor flags */ - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), - PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) - }, - /* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */ - { - DESCRIPTOR_TERMINATE_LIST, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */ - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 8, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) - }, -}; - -/* - * It is not known, if the setup is complete. - * - * Tested and works: VGA/DVI - * Untested: HDMI - */ -PCIe_DDI_DESCRIPTOR DdiList [] = { - // DP0 to HDMI0/DP - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) - }, - // DP1 to FCH - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeNutmegDpToVga, Aux2, Hdp2) - }, - // DP2 to HDMI1/DP - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35), - PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux3, Hdp3) - }, -}; - -PCIe_COMPLEX_DESCRIPTOR Trinity = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - VOID *TrinityPcieComplexListPtr; - VOID *TrinityPciePortPtr; - VOID *TrinityPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - - // GNB PCIe topology Porting - - // - // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - // - AllocHeapParams.RequestedBufferSize = sizeof(Trinity) + sizeof(PortList) + sizeof(DdiList); - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); - return; - } - - TrinityPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Trinity); - TrinityPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - TrinityPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - LibAmdMemFill (TrinityPcieComplexListPtr, - 0, - sizeof(Trinity), - &InitEarly->StdHeader); - - LibAmdMemFill (TrinityPciePortPtr, - 0, - sizeof(PortList), - &InitEarly->StdHeader); - - LibAmdMemFill (TrinityPcieDdiPtr, - 0, - sizeof(DdiList), - &InitEarly->StdHeader); - - LibAmdMemCopy (TrinityPcieComplexListPtr, &Trinity, sizeof(Trinity), &InitEarly->StdHeader); - LibAmdMemCopy (TrinityPciePortPtr, &PortList[0], sizeof(PortList), &InitEarly->StdHeader); - LibAmdMemCopy (TrinityPcieDdiPtr, &DdiList[0], sizeof(DdiList), &InitEarly->StdHeader); - - ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)TrinityPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)TrinityPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = TrinityPcieComplexListPtr; -} diff --git a/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h b/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h deleted file mode 100644 index add9008..0000000 --- a/src/mainboard/asus/f2a85-m/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include <vendorcode/amd/agesa/f15tn/AGESA.h> -#include <vendorcode/amd/agesa/f15tn/Lib/amdlib.h> - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl b/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl deleted file mode 100644 index f55a12a..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/AmdImc.asl +++ /dev/null @@ -1,97 +0,0 @@ -//BTDC Due to IMC Fan, ACPI control codes -OperationRegion(IMIO, SystemIO, 0x3E, 0x02) -Field(IMIO , ByteAcc, NoLock, Preserve) { - IMCX,8, - IMCA,8 -} - -IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { - Offset(0x80), - MSTI, 8, - MITS, 8, - MRG0, 8, - MRG1, 8, - MRG2, 8, - MRG3, 8, -} - -Method(WACK, 0) -{ - Store(0, Local0) - Store(50, Local1) - While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) { - Store(MRG0, Local0) - Sleep(10) - Decrement(Local1) - } -} - -//Init -Method (ITZE, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} - -//Sleep -Method (IMSP, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(1, MRG1) - Store(0, MRG2) - Store(0x98, MSTI) - WACK() - - Store(0, MRG0) - Store(0xB4, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() -} - -//Wake -Method (IMWK, 0) -{ - Store(0, MRG0) - Store(0xB5, MRG1) - Store(0, MRG2) - Store(0x96, MSTI) - WACK() - - Store(0, MRG0) - Store(0, MRG1) - Store(0, MRG2) - Store(0x80, MSTI) - WACK() - - Or(MRG2, 0x01, Local0) - - Store(0, MRG0) - Store(0, MRG1) - Store(Local0, MRG2) - Store(0x81, MSTI) - WACK() -} diff --git a/src/mainboard/asus/f2a85-m/acpi/cpstate.asl b/src/mainboard/asus/f2a85-m/acpi/cpstate.asl deleted file mode 100644 index 2240fd6..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/cpstate.asl +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package() - { - 0x00000D48, - 0x00011170, - 0x00000004, - 0x00000004, - 0x00000000, - 0x00000000 - }, - - Package() - { - 0x00000AF0, - 0x0000C544, - 0x00000004, - 0x00000004, - 0x00000001, - 0x00000001 - }, - - Package() - { - 0x000009C4, - 0x0000B3B0, - 0x00000004, - 0x00000004, - 0x00000002, - 0x00000002 - }, - - Package() - { - 0x00000898, - 0x0000ABE0, - 0x00000004, - 0x00000004, - 0x00000003, - 0x00000003 - }, - - Package() - { - 0x00000708, - 0x0000A410, - 0x00000004, - 0x00000004, - 0x00000004, - 0x00000004 - }, - - Package() - { - 0x00000578, - 0x00006F54, - 0x00000004, - 0x00000004, - 0x00000005, - 0x00000005 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/asus/f2a85-m/acpi/gpe.asl b/src/mainboard/asus/f2a85-m/acpi/gpe.asl deleted file mode 100644 index a5ec91a..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/gpe.asl +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ diff --git a/src/mainboard/asus/f2a85-m/acpi/mainboard.asl b/src/mainboard/asus/f2a85-m/acpi/mainboard.asl deleted file mode 100644 index a2c3119..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/mainboard.asl +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/asus/f2a85-m/acpi/routing.asl b/src/mainboard/asus/f2a85-m/acpi/routing.asl deleted file mode 100644 index 0685f8d..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/routing.asl +++ /dev/null @@ -1,262 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - /* Routing is in System Bus scope */ - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - F15 Host Controller */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, INTB, 0 }, - Package(){0x0001FFFF, 1, INTC, 0 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - - /* Bus 0, Dev 4 - PCIe Bridge for 4x slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 - * EHCI @ func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* SB devices */ - /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, INTC, 0 }, - Package(){0x0010FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 21 Pcie Bridge */ - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - F15 Host Controller */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ - Package(){0x0001FFFF, 0, 0, 17 }, - Package(){0x0001FFFF, 1, 0, 18 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */ - Package(){0x0002FFFF, 0, 0, 18 }, - Package(){0x0002FFFF, 1, 0, 19 }, - Package(){0x0002FFFF, 2, 0, 16 }, - Package(){0x0002FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - - /* Bus 0, Dev 4 - PCIe Bridge for x4 PCIe Slot black */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - - /* SB devices in APIC mode */ - /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 - * EHCI @ func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ - Package(){0x0010FFFF, 0, 0, 0x12}, - Package(){0x0010FFFF, 1, 0, 0x11}, - - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus0, Dev 21 PCIE Bridge */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - /* black slot */ - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PBR0, Package(){ - /* PCIx1 on SB */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(ABR0, Package(){ - /* PCIx1 on SB */ - Package(){0x0000FFFF, 0, 0, 0x10 }, - Package(){0x0000FFFF, 1, 0, 0x11 }, - Package(){0x0000FFFF, 2, 0, 0x12 }, - Package(){0x0000FFFF, 3, 0, 0x13 }, - }) - - Name(PBR1, Package(){ - /* Onboard network */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(ABR1, Package(){ - /* Onboard network */ - Package(){0x0000FFFF, 0, 0, 0x11 }, - Package(){0x0000FFFF, 1, 0, 0x12 }, - Package(){0x0000FFFF, 2, 0, 0x13 }, - Package(){0x0000FFFF, 3, 0, 0x10 }, - }) - - /* SB PCI Bridge */ - Name(PCIB, Package(){ - /* PCI slots: slot 0 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - }) diff --git a/src/mainboard/asus/f2a85-m/acpi/sata.asl b/src/mainboard/asus/f2a85-m/acpi/sata.asl deleted file mode 100644 index 5ad3e47..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/sata.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No SATA functionality */ diff --git a/src/mainboard/asus/f2a85-m/acpi/si.asl b/src/mainboard/asus/f2a85-m/acpi/si.asl deleted file mode 100644 index 554b59d..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/si.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ diff --git a/src/mainboard/asus/f2a85-m/acpi/sleep.asl b/src/mainboard/asus/f2a85-m/acpi/sleep.asl deleted file mode 100644 index 77fd8f6..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/sleep.asl +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - - Store (0x07, UPWS) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/asus/f2a85-m/acpi/superio.asl b/src/mainboard/asus/f2a85-m/acpi/superio.asl deleted file mode 100644 index ec72e36..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asus/f2a85-m/acpi/thermal.asl b/src/mainboard/asus/f2a85-m/acpi/thermal.asl deleted file mode 100644 index 0466a1b..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/thermal.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* No thermal zone functionality */ diff --git a/src/mainboard/asus/f2a85-m/acpi/usb_oc.asl b/src/mainboard/asus/f2a85-m/acpi/usb_oc.asl deleted file mode 100644 index 1e63d97..0000000 --- a/src/mainboard/asus/f2a85-m/acpi/usb_oc.asl +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) diff --git a/src/mainboard/asus/f2a85-m/acpi_tables.c b/src/mainboard/asus/f2a85-m/acpi_tables.c deleted file mode 100644 index 428721e..0000000 --- a/src/mainboard/asus/f2a85-m/acpi_tables.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" - -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <console/console.h> -#include <cpu/amd/amdfam15.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write Hudson IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *alib; - acpi_header_t *ivrs; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; /* it will used by fadt */ - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ /* it needs 64 bit alignment */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; /* it will be used by fadt */ - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); - ivrs = agesawrapper_getlateinitptr(PICK_IVRS); - if (ivrs != NULL) { - memcpy((void *)current, ivrs, ivrs->length); - ivrs = (acpi_header_t *) current; - current += ivrs->length; - acpi_add_table(rsdp, ivrs); - } else { - printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); - } - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* ALIB */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } - else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - } - else { - printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); - } - acpi_add_table(rsdp,ssdt); - - printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/asus/f2a85-m/agesawrapper.c b/src/mainboard/asus/f2a85-m/agesawrapper.c deleted file mode 100644 index e02ca14..0000000 --- a/src/mainboard/asus/f2a85-m/agesawrapper.c +++ /dev/null @@ -1,645 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/*---------------------------------------------------------------------------------------- - * M O D U L E S U S E D - *---------------------------------------------------------------------------------------- - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "PlatformGnbPcieComplex.h" - -#include <arch/io.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/x86/mtrr.h> -#include <device/device.h> -#include <southbridge/amd/agesa/hudson/hudson.h> -#include <stdint.h> -#include <string.h> -#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> - - -#define FILECODE UNASSIGNED_FILE_FILECODE - -/*---------------------------------------------------------------------------------------- - * D E F I N I T I O N S A N D M A C R O S - *---------------------------------------------------------------------------------------- - */ - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; -VOID *AcpiIvrs = NULL; - -/*---------------------------------------------------------------------------------------- - * T Y P E D E F S A N D S T R U C T U R E S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------------------- - * E X P O R T E D F U N C T I O N S - *---------------------------------------------------------------------------------------- - */ - -/*--------------------------------------------------------------------------------------- - * L O C A L F U N C T I O N S - *--------------------------------------------------------------------------------------- - */ -AGESA_STATUS agesawrapper_amdinitcpuio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of Hudson legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; /* last address before non-posted range */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio(void) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - AMD_CONFIG_PARAMS StdHeader; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set ROM cache onto WP to decrease post time */ - MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - LibAmdMemFill (&AmdResetParams, - 0, - sizeof (AMD_RESET_PARAMS), - &(AmdResetParams.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_POST_PARAMS *PostParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; - status = AmdInitPost (PostParams); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_ENV_PARAMS *EnvParam; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - status = AmdCreateStruct (&AmdParamStruct); - EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; - - status = AmdInitEnv (EnvParam); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - case PICK_IVRS: - return AcpiIvrs; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS *AmdLateParams; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ - AmdCreateStruct(&AmdParamStruct); - AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; - Status = AmdInitLate(AmdLateParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParams->DmiTable; - AcpiPstate = AmdLateParams->AcpiPState; - AcpiSrat = AmdLateParams->AcpiSrat; - AcpiSlit = AmdLateParams->AcpiSlit; - - AcpiWheaMce = AmdLateParams->AcpiWheaMce; - AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; - AcpiAlib = AmdLateParams->AcpiAlib; - AcpiIvrs = AmdLateParams->AcpiIvrs; - - printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," - "AcpiSlit:%x, Mce:%x, Cmc:%x," - "Alib:%x, AcpiIvrs:%x in %s\n", - (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, - (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, - (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); - - /* AmdReleaseStruct (&AmdParamStruct); */ - return Status; -} - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - LibAmdMemFill (&ApExeParams, - 0, - sizeof (AP_EXE_PARAMS), - &(ApExeParams.StdHeader)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - /* agesawrapper_amdreadeventlog(); */ - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - - -AGESA_STATUS agesawrapper_amdinitresume(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdParamStruct, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdParamStruct.StdHeader)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; -#if 1 /* TODO: Get the param from Nv storage. */ - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); -#endif - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_fchs3earlyrestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - - FchInitS3EarlyRestore(&FchParams); - - return status; -} -#endif - -AGESA_STATUS agesawrapper_amds3laterestore(void) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - agesawrapper_amdinitcpuio(); - LibAmdMemFill (&AmdS3LateParams, - 0, - sizeof (AMD_S3LATE_PARAMS), - &(AmdS3LateParams.StdHeader)); - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - -#if 1 /* TODO:Get params from Volatile storage. */ - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); -#endif - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ - -extern UINT8 picr_data[0x54], intr_data[0x54]; - -AGESA_STATUS agesawrapper_fchs3laterestore(void) -{ - AGESA_STATUS status = AGESA_SUCCESS; - - FCH_DATA_BLOCK FchParams; - AMD_CONFIG_PARAMS StdHeader; - UINT8 byte; - - StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; - StdHeader.AltImageBasePtr = 0; - StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - StdHeader.Func = 0; - StdHeader.ImageBasePtr = 0; - - FchParams.StdHeader = &StdHeader; - s3_resume_init_data(&FchParams); - FchInitS3LateRestore(&FchParams); - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - return status; -} -#endif - -#ifndef __PRE_RAM__ - -AGESA_STATUS agesawrapper_amdS3Save(void) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - LibAmdMemFill (&AmdInterfaceParams, - 0, - sizeof (AMD_INTERFACE_PARAMS), - &(AmdInterfaceParams.StdHeader)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - - AmdCreateStruct(&AmdInterfaceParams); - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save(AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); -#if 1 /* TODO: Save the params to NvStorage */ - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); -#endif - printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - -#if 1 /* TODO: Save the params to VolatileStorage */ - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage - ); -#endif - } - OemAgesaSaveMtrr(); - - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} - -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdreadeventlog ( - UINT8 HeapStatus - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - LibAmdMemFill (&AmdEventParams, - 0, - sizeof (EVENT_PARAMS), - &(AmdEventParams.StdHeader)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - AmdEventParams.StdHeader.HeapStatus = HeapStatus; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/asus/f2a85-m/agesawrapper.h b/src/mainboard/asus/f2a85-m/agesawrapper.h deleted file mode 100644 index d4a6106..0000000 --- a/src/mainboard/asus/f2a85-m/agesawrapper.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include <vendorcode/amd/agesa/f15tn/AGESA.h> - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ - PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); -AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitcpuio(void); -void *agesawrapper_getlateinitptr (int pick); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); - -AGESA_STATUS agesawrapper_fchs3earlyrestore(void); -AGESA_STATUS agesawrapper_fchs3laterestore(void); - -#endif diff --git a/src/mainboard/asus/f2a85-m/board_info.txt b/src/mainboard/asus/f2a85-m/board_info.txt deleted file mode 100644 index b68541c..0000000 --- a/src/mainboard/asus/f2a85-m/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_Socket_FM2/F2A85M/ -ROM package: DIP8 -ROM protocol: [http://www.winbond-usa.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/S... SPI] -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/f2a85-m/buildOpts.c b/src/mainboard/asus/f2a85-m/buildOpts.c deleted file mode 100644 index cd1c812..0000000 --- a/src/mainboard/asus/f2a85-m/buildOpts.c +++ /dev/null @@ -1,511 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> - -#include <vendorcode/amd/agesa/f15tn/AGESA.h> - -/* Include the files that instantiate the configuration definitions. */ -#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> -#include <vendorcode/amd/agesa/f15tn/Include/CommonReturns.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> -/* the next two headers depend on heapManager.h */ -#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> -/* These tables are optional and may be used to adjust memory timing settings */ -#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> -#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> - -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT FALSE -#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP2_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT FALSE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -#define INSTALL_FM2_SOCKET_SUPPORT TRUE - -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE -#define BLDOPT_REMOVE_SRAT FALSE //TRUE -#define BLDOPT_REMOVE_SLIT FALSE //TRUE -#define BLDOPT_REMOVE_WHEA FALSE //TRUE -#define BLDOPT_REMOVE_CRAT TRUE -#define BLDOPT_REMOVE_DMI TRUE -//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -//This element selects whether P-States should be forced to be independent, -// as reported by the ACPI _PSD object. For single-link processors, -// setting TRUE for OS to support this feature. - -//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 90000 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE FALSE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_DRAM_RATE 0 -#define BLDCFG_SCRUB_L2_RATE 0 -#define BLDCFG_SCRUB_L3_RATE 0 -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_SCRUB_DC_RATE 0 -#define BLDCFG_ECC_SYMBOL_SIZE 4 -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_ECC_SYNC_FLOOD FALSE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 - -#define BLDOPT_REMOVE_ALIB FALSE -#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled -#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' -#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 - -#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 -#define BLDCFG_CFG_ABM_SUPPORT 0 - -//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 - -// Specify the default values for the VRM controlling the VDDNB plane. -// If not specified, the values used for the core VRM will be applied -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity - -#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 - -#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 -#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 - -#if CONFIG_GFXUMA -#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED -#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED -//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ -#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#endif - -#define BLDCFG_IOMMU_SUPPORT FALSE - -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID -//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID -//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID - -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE -/* - * Customized OEM build configurations for FCH component - */ -// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 -// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 -// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 -// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 -// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 -// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 -// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 -// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 -// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 -// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 -// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 -// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 -// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 -// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 -// #define BLDCFG_AZALIA_SSID 0x780D1022 -// #define BLDCFG_SMBUS_SSID 0x780B1022 -// #define BLDCFG_IDE_SSID 0x780C1022 -// #define BLDCFG_SATA_AHCI_SSID 0x78011022 -// #define BLDCFG_SATA_IDE_SSID 0x78001022 -// #define BLDCFG_SATA_RAID5_SSID 0x78031022 -// #define BLDCFG_SATA_RAID_SSID 0x78021022 -// #define BLDCFG_EHCI_SSID 0x78081022 -// #define BLDCFG_OHCI_SSID 0x78071022 -// #define BLDCFG_LPC_SSID 0x780E1022 -// #define BLDCFG_SD_SSID 0x78061022 -// #define BLDCFG_XHCI_SSID 0x78121022 -// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE -// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 -// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE - -CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, - { CPU_LIST_TERMINAL } -}; - -#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList - - // This is the delivery package title, "BrazosPI" - // This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - - // This is the release version number of the AGESA component - // This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define DDR2100_FREQUENCY 1050 ///< DDR 2100 -#define DDR2133_FREQUENCY 1066 ///< DDR 2133 -#define DDR2400_FREQUENCY 1200 ///< DDR 2400 -#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 -#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 -/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ -#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 -#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 -#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 -#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 -#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 -#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 -#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 -#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 -#define DFLT_HPET_BASE_ADDRESS 0xFED00000 -#define DFLT_SMI_CMD_PORT 0xB0 -#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 -#define DFLT_GEC_BASE_ADDRESS 0xFED61000 -#define DFLT_AZALIA_SSID 0x780D1022 -#define DFLT_SMBUS_SSID 0x780B1022 -#define DFLT_IDE_SSID 0x780C1022 -#define DFLT_SATA_AHCI_SSID 0x78011022 -#define DFLT_SATA_IDE_SSID 0x78001022 -#define DFLT_SATA_RAID5_SSID 0x78031022 -#define DFLT_SATA_RAID_SSID 0x78021022 -#define DFLT_EHCI_SSID 0x78081022 -#define DFLT_OHCI_SSID 0x78071022 -#define DFLT_LPC_SSID 0x780E1022 -#define DFLT_SD_SSID 0x78061022 -#define DFLT_XHCI_SSID 0x78121022 -#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE -#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 -#define DFLT_FCH_GPP_PORT0_PRESENT TRUE -#define DFLT_FCH_GPP_PORT1_PRESENT TRUE -#define DFLT_FCH_GPP_PORT2_PRESENT FALSE -#define DFLT_FCH_GPP_PORT3_PRESENT FALSE -#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE -//#define BLDCFG_IR_PIN_CONTROL 0x33 -//#define FCH_NO_XHCI_SUPPORT FALSE -GPIO_CONTROL f2a85_m_gpio[] = { -// {183, Function1, PullUpB}, - {-1} -}; -#define BLDCFG_FCH_GPIO_CONTROL_LIST (&f2a85_m_gpio[0]) - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -/* Moving this include up will break AGESA. */ -#include <vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h> - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Speicifes the HW RXEN training seed for a channel of a socket - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), -/* - TODO: is this OK for DDR3 socket FM2? - MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), - ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), - CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - */ - PSO_END -}; - -// Customer table -UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); - -/* *************************************************************************** - * Optional User code to be included into the AGESA build - * These may be 32-bit call-out routines... - */ -//AGESA_STATUS -//AgesaReadSpd ( -// IN UINTN FcnData, -// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd -// ) -//{ -// /* platform code to read an SPD... */ -// return Status; -//} diff --git a/src/mainboard/asus/f2a85-m/cmos.layout b/src/mainboard/asus/f2a85-m/cmos.layout deleted file mode 100644 index 5520564..0000000 --- a/src/mainboard/asus/f2a85-m/cmos.layout +++ /dev/null @@ -1,114 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/f2a85-m/devicetree.cb b/src/mainboard/asus/f2a85-m/devicetree.cb deleted file mode 100644 index 9ac5574..0000000 --- a/src/mainboard/asus/f2a85-m/devicetree.cb +++ /dev/null @@ -1,139 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family15tn/root_complex - - device cpu_cluster 0 on - chip cpu/amd/agesa/family15tn - device lapic 10 on end - end - end - - device domain 0 on - subsystemid 0x1022 0x1410 inherit - chip northbridge/amd/agesa/family15tn # CPU side of HT root complex - - chip northbridge/amd/agesa/family15tn # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX - device pci 1.1 on end # Internal Multimedia - device pci 2.0 on end # PCIE SLOT0 x16 blue - device pci 3.0 off end # unused? - device pci 4.0 on end # PCIE 4x black - device pci 5.0 off end # unused? - device pci 6.0 off end # unused? - device pci 7.0 off end # LAN - device pci 8.0 off end # NB/SB Link P2P bridge - end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex - - chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus - device pci 10.0 on end # XHCI HC0 - device pci 10.1 on end # XHCI HC1 - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SMBUS - chip drivers/generic/generic #dimm 0 - device i2c 50 on end # 7-bit SPD address - end - chip drivers/generic/generic #dimm 1 - device i2c 51 on end # 7-bit SPD address - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8728f - register hwm_ctl_register = "0xc0" - register hwm_main_ctl_register = "0x33" - register hwm_adc_temp_chan_en_reg = "0x38" - register hwm_fan1_ctl_pwm = "0x00" - register hwm_fan2_ctl_pwm = "0x00" - register hwm_fan3_ctl_pwm = "0x00" - - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Env Controller - io 0x60 = 0x290 - io 0x62 = 0x220 - irq 0x70 = 0 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 off # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0x228 #SMI - io 0x62 = 0x300 #Simple I/O - io 0x64 = 0x238 #Phony resource IT8603E does not have it - irq 0x70 = 0 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8728f - end #device pci 14.3 # LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - # SD, make it on so the BAR is assigned (if proper hudson on/off handling is implemented this may go away) - device pci 14.7 on end - device pci 15.0 on end # PCIe 0 - onboard PCIe 1x - device pci 15.1 on end # PCIe 1 onboard gigabit - device pci 15.2 off end # unused - device pci 15.3 off end # unused - - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - register "gpp_configuration" = "4" - end #chip southbridge/amd/hudson - - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex - end #domain -end #chip northbridge/amd/agesa/family15tn/root_complex diff --git a/src/mainboard/asus/f2a85-m/dsdt.asl b/src/mainboard/asus/f2a85-m/dsdt.asl deleted file mode 100644 index a1a95b2..0000000 --- a/src/mainboard/asus/f2a85-m/dsdt.asl +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Globals for the platform */ - #include "acpi/mainboard.asl" - - /* Describe the USB Overcurrent pins */ - #include "acpi/usb_oc.asl" - - /* PCI IRQ mapping for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> - - /* Describe the processor tree (_PR) */ - #include <cpu/amd/agesa/family15tn/acpi/cpu.asl> - - /* Describe the supported Sleep States for this Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> - - /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */ - #include "acpi/sleep.asl" - - Scope(_SB) { - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ - #include "acpi/routing.asl" - - Device(PWRB) { - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) - Name(_STA, 0x0B) - } - - Device(PCI0) { - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/fch.asl> - - /** - * TODO: The devices listed here (SBR0 and SBR1) do not appear to - * be referenced anywhere and could possibly be removed. - */ - Device(SBR0) { /* PCIe 1x SB */ - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(ABR0) } /* APIC mode */ - Return (PBR0) /* PIC mode */ - } - } - - Device(SBR1) { /* Onboard network */ - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT, 0) { - If(PMOD){ Return(ABR1) } /* APIC mode */ - Return (PBR1) /* PIC mode */ - } - } - } - - /* Describe PCI INT[A-H] for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> - - } /* End Scope(_SB) */ - - /* Describe SMBUS for the Southbridge */ - #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> - - /* Define the General Purpose Events for the platform */ - #include "acpi/gpe.asl" - - /* Define the Thermal zones and methods for the platform */ - #include "acpi/thermal.asl" - - /* Define the System Indicators for the platform */ - #include "acpi/si.asl" - -} -/* End of ASL file */ diff --git a/src/mainboard/asus/f2a85-m/irq_tables.c b/src/mainboard/asus/f2a85-m/irq_tables.c deleted file mode 100644 index 0bab5c9..0000000 --- a/src/mainboard/asus/f2a85-m/irq_tables.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <cpu/amd/amdfam15.h> -#include <device/pci_def.h> -#include <stdint.h> -#include <string.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asus/f2a85-m/mainboard.c b/src/mainboard/asus/f2a85-m/mainboard.c deleted file mode 100644 index 191eea8..0000000 --- a/src/mainboard/asus/f2a85-m/mainboard.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> - -#include <arch/acpi.h> -#include <arch/io.h> -#include <console/console.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/x86/msr.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_def.h> - -/************************************************* - * enable the dedicated function in thatcher board. - *************************************************/ -static void mainboard_enable(device_t dev) -{ - msr_t msr; - - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - msr = rdmsr(0xC0011020); - msr.lo &= ~(1 << 28); - wrmsr(0xC0011020, msr); - - msr = rdmsr(0xC0011022); - msr.lo &= ~(1 << 4); - msr.lo &= ~(1 << 13); - wrmsr(0xC0011022, msr); - - msr = rdmsr(0xC0011023); - msr.lo &= ~(1 << 23); - wrmsr(0xC0011023, msr); - - if (acpi_is_wakeup_s3()) - agesawrapper_fchs3earlyrestore(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asus/f2a85-m/mptable.c b/src/mainboard/asus/f2a85-m/mptable.c deleted file mode 100644 index cc81819..0000000 --- a/src/mainboard/asus/f2a85-m/mptable.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/cpu.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/smp/mpspec.h> -#include <cpu/amd/amdfam15.h> -#include <cpu/x86/lapic.h> -#include <device/pci.h> -#include <stdint.h> -#include <string.h> -#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ - - -u8 picr_data[] = { - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F -}; -u8 intr_data[0x54] = { - 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) -{ - mc->mpc_length += length; - mc->mpc_entry_count++; -} - -static void my_smp_write_bus(struct mp_config_table *mc, - unsigned char id, const char *bustype) -{ - struct mpc_config_bus *mpc; - mpc = smp_next_mpc_entry(mc); - memset(mpc, '\0', sizeof(*mpc)); - mpc->mpc_type = MP_BUS; - mpc->mpc_busid = id; - memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); - smp_add_mpc_entry(mc, sizeof(*mpc)); -} - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 byte; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - //mptable_write_buses(mc, NULL, &bus_isa); - my_smp_write_bus(mc, 0, "PCI "); - my_smp_write_bus(mc, 1, "PCI "); - bus_isa = 0x02; - my_smp_write_bus(mc, bus_isa, "ISA "); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - /* PIC IRQ routine */ - for (byte = 0x0; byte < sizeof(picr_data); byte ++) { - outb(byte, 0xC00); - outb(picr_data[byte], 0xC01); - } - - /* APIC IRQ routine */ - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) - - /* IOMMU */ - PCI_INT(0x0, 0x0, 0x0, 0x10); - PCI_INT(0x0, 0x0, 0x1, 0x11); - PCI_INT(0x0, 0x0, 0x2, 0x12); - PCI_INT(0x0, 0x0, 0x3, 0x13); - - /* Internal VGA */ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - /* SMBUS */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - } - - /* PCIe Lan*/ - PCI_INT(0x0, 0x06, 0x0, 0x13); - - /* FCH PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* FCH PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* FCH PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* FCH PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c deleted file mode 100644 index caa32ca..0000000 --- a/src/mainboard/asus/f2a85-m/romstage.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Advanced Micro Devices, Inc. - * Copyright (C) 2012 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> - -#include <arch/acpi.h> -#include <arch/cpu.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <cbmem.h> -#include <console/console.h> -#include <cpu/amd/agesa/s3_resume.h> -#include "cpu/amd/car.h" -#include <cpu/x86/bist.h> -#include <cpu/x86/lapic.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <device/pnp_def.h> -#include <southbridge/amd/agesa/hudson/hudson.h> -#include <southbridge/amd/agesa/hudson/smbus.h> -#include <stdint.h> -#include <string.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8728f/it8728f.h> - -#define MMIO_NON_POSTED_START 0xfed00000 -#define MMIO_NON_POSTED_END 0xfedfffff -#define SB_MMIO 0xFED80000 -#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) - -#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) - -static void sbxxx_enable_48mhzout(void) -{ - /* most likely programming to 48MHz out signal */ - u32 reg32; - reg32 = SB_MMIO_MISC32(0x28); - reg32 &= 0xffc7ffff; - reg32 |= 0x00100000; - SB_MMIO_MISC32(0x28) = reg32; - - reg32 = SB_MMIO_MISC32(0x40); - reg32 &= ~0x80u; - SB_MMIO_MISC32(0x40) = reg32; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - u8 byte; - device_t dev; - -#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE) - hudson_pci_port80(); -#endif -#if IS_ENABLED(CONFIG_POST_DEVICE_LPC) - hudson_lpc_port80(); -#endif - - AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); - - if (!cpu_init_detectedx && boot_cpu()) { - - /* enable SIO LPC decode */ - dev = PCI_DEV(0, 0x14, 3); - byte = pci_read_config8(dev, 0x48); - byte |= 3; /* 2e, 2f */ - pci_write_config8(dev, 0x48, byte); - - /* enable serial decode */ - byte = pci_read_config8(dev, 0x44); - byte |= (1 << 6); /* 0x3f8 */ - pci_write_config8(dev, 0x44, byte); - - post_code(0x30); - - /* enable SB MMIO space */ - outb(0x24, 0xcd6); - outb(0x1, 0xcd7); - - /* enable SIO clock */ - sbxxx_enable_48mhzout(); - ite_kill_watchdog(GPIO_DEV); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_enable_3vsbsw(GPIO_DEV); - console_init(); - - /* turn on secondary smbus at b20 */ - outb(0x28, 0xcd6); - byte = inb(0xcd7); - byte |= 1; - outb(byte, 0xcd7); - - /* set DDR3 voltage */ - byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL; - - /* default is byte = 0x0, so no need to set it in this case */ - if (byte) - do_smbus_write_byte(0xb20, 0x15, 0x3, byte); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - post_code(0x39); - - AGESAWRAPPER(amdinitearly); - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - AGESAWRAPPER(amdinitpost); - post_code(0x41); - AGESAWRAPPER(amdinitenv); - disable_cache_as_ram(); - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - post_code(0x50); - copy_and_run(); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/asus/f2a85_m/BiosCallOuts.c b/src/mainboard/asus/f2a85_m/BiosCallOuts.c new file mode 100644 index 0000000..13bee0c --- /dev/null +++ b/src/mainboard/asus/f2a85_m/BiosCallOuts.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "OptionsIds.h" + +#include <cbfs.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> +#include <stdlib.h> + +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, + {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, + {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/** + * ASUS F2A85-M board ALC887-VD Verb Table + * + * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running + * the vendor BIOS. + */ +const CODEC_ENTRY f2a85_m_alc887_VerbTbl[] = { + {0x11, 0x99430140}, + {0x12, 0x411111f0}, + {0x14, 0x01014010}, + {0x15, 0x01011012}, + {0x16, 0x01016011}, + {0x17, 0x01012014}, + {0x18, 0x01a19850}, + {0x19, 0x02a19c60}, + {0x1a, 0x0181305f}, + {0x1b, 0x02214c20}, + {0x1c, 0x411111f0}, + {0x1d, 0x4005e601}, + {0x1e, 0x01456130}, + {0x1f, 0x411111f0}, + {0xff, 0xffffffff} +}; + +static const CODEC_TBL_LIST CodecTableList[] = +{ + {0x10ec0887, (CODEC_ENTRY*)&f2a85_m_alc887_VerbTbl[0]}, + {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} +}; + +/** + * Fch Oem setting callback + * + * Configure platform specific Hudson device, + * such Azalia, SATA, GEC, IMC etc. + */ +static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr) +{ + AMD_CONFIG_PARAMS *StdHeader = ConfigPtr; + + if (StdHeader->Func == AMD_INIT_RESET) { + FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); + FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE); + FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_reset->FchReset.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + } else if (StdHeader->Func == AMD_INIT_ENV) { + FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData; + printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); + + /* Azalia Controller OEM Codec Table Pointer */ + FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); + /* Azalia Controller Front Panel OEM Table Pointer */ + FchParams_env->Imc.ImcEnable = FALSE; + FchParams_env->Hwm.HwMonitorEnable = FALSE; + FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ + + /* XHCI configuration */ + FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + FchParams_env->Usb.Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); + } + printk(BIOS_DEBUG, "Done\n"); + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/asus/f2a85_m/Kconfig b/src/mainboard/asus/f2a85_m/Kconfig new file mode 100644 index 0000000..8578a08 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/Kconfig @@ -0,0 +1,109 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# Copyright (C) 2012 Rudolf Marek r.marek@assembler.cz +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_ASUS_F2A85_M + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY15_TN + select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN + select SOUTHBRIDGE_AMD_AGESA_HUDSON + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select SUPERIO_ITE_IT8728F + select BOARD_ROMSIZE_KB_8192 + select GFXUMA + +choice + prompt "DDR3 memory voltage" + default BOARD_ASUS_F2A85_M_DDR3_VOLT_150 + +config BOARD_ASUS_F2A85_M_DDR3_VOLT_135 + bool "1.35V" + help + Set DRR3 memory voltage to 1.35V +config BOARD_ASUS_F2A85_M_DDR3_VOLT_150 + bool "1.50V" + help + Set DRR3 memory voltage to 1.50V +config BOARD_ASUS_F2A85_M_DDR3_VOLT_165 + bool "1.65V" + help + Set DRR3 memory voltage to 1.65V +endchoice + +config BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL + hex + default 0x9e if BOARD_ASUS_F2A85_M_DDR3_VOLT_135 + default 0x0 if BOARD_ASUS_F2A85_M_DDR3_VOLT_150 + default 0x1e if BOARD_ASUS_F2A85_M_DDR3_VOLT_165 + +config MAINBOARD_DIR + string + default asus/f2a85_m + +config MAINBOARD_PART_NUMBER + string + default "F2A85-M" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 4 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS_ID + string + default "1002,9993" + +config HUDSON_LEGACY_FREE + bool + default y + +endif # BOARD_ASUS_F2A85_M diff --git a/src/mainboard/asus/f2a85_m/Makefile.inc b/src/mainboard/asus/f2a85_m/Makefile.inc new file mode 100644 index 0000000..3103f70 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/Makefile.inc @@ -0,0 +1,28 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/asus/f2a85_m/OptionsIds.h b/src/mainboard/asus/f2a85_m/OptionsIds.h new file mode 100644 index 0000000..bf7eedc --- /dev/null +++ b/src/mainboard/asus/f2a85_m/OptionsIds.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +//#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_CONTROL_ENABLED TRUE +#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE +//#define IDSOPT_PERF_ANALYSIS TRUE +#define IDSOPT_ASSERT_ENABLED TRUE +//#undef IDSOPT_DEBUG_ENABLED +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/asus/f2a85_m/PlatformGnbPcie.c b/src/mainboard/asus/f2a85_m/PlatformGnbPcie.c new file mode 100644 index 0000000..ee5b5ff --- /dev/null +++ b/src/mainboard/asus/f2a85_m/PlatformGnbPcie.c @@ -0,0 +1,200 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "PlatformGnbPcieComplex.h" + +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> + +#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE + +/* + * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping) + * + * Lane Id + * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8 + * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8 + * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8 + * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8 + * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7 + * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7 + * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7 + * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7 + * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI + * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI + * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI + * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI + * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI + * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI + * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI + * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI + * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI + * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI + * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI + * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI + * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI + * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI + * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI + * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI + * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs) + * 25 DP0_TX[P,N]1 + * 26 DP0_TX[P,N]2 + * 27 DP0_TX[P,N]3 + * 28 DP1_TX[P,N]0 + * 29 DP1_TX[P,N]1 + * 30 DP1_TX[P,N]2 + * 31 DP1_TX[P,N]3 + * 32 DP2_TX[P,N]0 + * 33 DP2_TX[P,N]1 + * 34 DP2_TX[P,N]2 + * 35 DP2_TX[P,N]3 + * 36 DP2_TX[P,N]4 + * 37 DP2_TX[P,N]5 + * 38 DP2_TX[P,N]6 + */ + +PCIe_PORT_DESCRIPTOR PortList [] = { + /* PCIe port, Lanes 8:23, PCI Device Number 2, blue x16 slot */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + /* PCIe port, Lanes 4:7, PCI Device Number 4, black x16 slot (in fact x4) */ + { + 0, /* Descriptor flags */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1) + }, + /* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */ + { + DESCRIPTOR_TERMINATE_LIST, /* Descriptor flags !!!IMPORTANT!!! Terminate last element of array */ + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 8, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) + }, +}; + +/* + * It is not known, if the setup is complete. + * + * Tested and works: VGA/DVI + * Untested: HDMI + */ +PCIe_DDI_DESCRIPTOR DdiList [] = { + // DP0 to HDMI0/DP + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1) + }, + // DP1 to FCH + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeNutmegDpToVga, Aux2, Hdp2) + }, + // DP2 to HDMI1/DP + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35), + PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux3, Hdp3) + }, +}; + +PCIe_COMPLEX_DESCRIPTOR Trinity = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + VOID *TrinityPcieComplexListPtr; + VOID *TrinityPciePortPtr; + VOID *TrinityPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Trinity) + sizeof(PortList) + sizeof(DdiList); + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + ASSERT(FALSE); + return; + } + + TrinityPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Trinity); + TrinityPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + TrinityPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + LibAmdMemFill (TrinityPcieComplexListPtr, + 0, + sizeof(Trinity), + &InitEarly->StdHeader); + + LibAmdMemFill (TrinityPciePortPtr, + 0, + sizeof(PortList), + &InitEarly->StdHeader); + + LibAmdMemFill (TrinityPcieDdiPtr, + 0, + sizeof(DdiList), + &InitEarly->StdHeader); + + LibAmdMemCopy (TrinityPcieComplexListPtr, &Trinity, sizeof(Trinity), &InitEarly->StdHeader); + LibAmdMemCopy (TrinityPciePortPtr, &PortList[0], sizeof(PortList), &InitEarly->StdHeader); + LibAmdMemCopy (TrinityPcieDdiPtr, &DdiList[0], sizeof(DdiList), &InitEarly->StdHeader); + + ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)TrinityPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)TrinityPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)TrinityPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = TrinityPcieComplexListPtr; +} diff --git a/src/mainboard/asus/f2a85_m/PlatformGnbPcieComplex.h b/src/mainboard/asus/f2a85_m/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..add9008 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/PlatformGnbPcieComplex.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include <vendorcode/amd/agesa/f15tn/AGESA.h> +#include <vendorcode/amd/agesa/f15tn/Lib/amdlib.h> + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/asus/f2a85_m/acpi/AmdImc.asl b/src/mainboard/asus/f2a85_m/acpi/AmdImc.asl new file mode 100644 index 0000000..f55a12a --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/AmdImc.asl @@ -0,0 +1,97 @@ +//BTDC Due to IMC Fan, ACPI control codes +OperationRegion(IMIO, SystemIO, 0x3E, 0x02) +Field(IMIO , ByteAcc, NoLock, Preserve) { + IMCX,8, + IMCA,8 +} + +IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) { + Offset(0x80), + MSTI, 8, + MITS, 8, + MRG0, 8, + MRG1, 8, + MRG2, 8, + MRG3, 8, +} + +Method(WACK, 0) +{ + Store(0, Local0) + Store(50, Local1) + While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) { + Store(MRG0, Local0) + Sleep(10) + Decrement(Local1) + } +} + +//Init +Method (ITZE, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} + +//Sleep +Method (IMSP, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(1, MRG1) + Store(0, MRG2) + Store(0x98, MSTI) + WACK() + + Store(0, MRG0) + Store(0xB4, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() +} + +//Wake +Method (IMWK, 0) +{ + Store(0, MRG0) + Store(0xB5, MRG1) + Store(0, MRG2) + Store(0x96, MSTI) + WACK() + + Store(0, MRG0) + Store(0, MRG1) + Store(0, MRG2) + Store(0x80, MSTI) + WACK() + + Or(MRG2, 0x01, Local0) + + Store(0, MRG0) + Store(0, MRG1) + Store(Local0, MRG2) + Store(0x81, MSTI) + WACK() +} diff --git a/src/mainboard/asus/f2a85_m/acpi/cpstate.asl b/src/mainboard/asus/f2a85_m/acpi/cpstate.asl new file mode 100644 index 0000000..2240fd6 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/cpstate.asl @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package() + { + 0x00000D48, + 0x00011170, + 0x00000004, + 0x00000004, + 0x00000000, + 0x00000000 + }, + + Package() + { + 0x00000AF0, + 0x0000C544, + 0x00000004, + 0x00000004, + 0x00000001, + 0x00000001 + }, + + Package() + { + 0x000009C4, + 0x0000B3B0, + 0x00000004, + 0x00000004, + 0x00000002, + 0x00000002 + }, + + Package() + { + 0x00000898, + 0x0000ABE0, + 0x00000004, + 0x00000004, + 0x00000003, + 0x00000003 + }, + + Package() + { + 0x00000708, + 0x0000A410, + 0x00000004, + 0x00000004, + 0x00000004, + 0x00000004 + }, + + Package() + { + 0x00000578, + 0x00006F54, + 0x00000004, + 0x00000004, + 0x00000005, + 0x00000005 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/f2a85_m/acpi/gpe.asl b/src/mainboard/asus/f2a85_m/acpi/gpe.asl new file mode 100644 index 0000000..a5ec91a --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/gpe.asl @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ diff --git a/src/mainboard/asus/f2a85_m/acpi/mainboard.asl b/src/mainboard/asus/f2a85_m/acpi/mainboard.asl new file mode 100644 index 0000000..a2c3119 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/mainboard.asl @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ diff --git a/src/mainboard/asus/f2a85_m/acpi/routing.asl b/src/mainboard/asus/f2a85_m/acpi/routing.asl new file mode 100644 index 0000000..0685f8d --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/routing.asl @@ -0,0 +1,262 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + /* Routing is in System Bus scope */ + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, INTB, 0 }, + Package(){0x0001FFFF, 1, INTC, 0 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for 4x slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* SB devices */ + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, INTC, 0 }, + Package(){0x0010FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 21 Pcie Bridge */ + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - F15 Host Controller */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */ + Package(){0x0001FFFF, 0, 0, 17 }, + Package(){0x0001FFFF, 1, 0, 18 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */ + Package(){0x0002FFFF, 0, 0, 18 }, + Package(){0x0002FFFF, 1, 0, 19 }, + Package(){0x0002FFFF, 2, 0, 16 }, + Package(){0x0002FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + + /* Bus 0, Dev 4 - PCIe Bridge for x4 PCIe Slot black */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + + /* SB devices in APIC mode */ + /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0 + * EHCI @ func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */ + Package(){0x0010FFFF, 0, 0, 0x12}, + Package(){0x0010FFFF, 1, 0, 0x11}, + + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus0, Dev 21 PCIE Bridge */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + /* black slot */ + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PBR0, Package(){ + /* PCIx1 on SB */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(ABR0, Package(){ + /* PCIx1 on SB */ + Package(){0x0000FFFF, 0, 0, 0x10 }, + Package(){0x0000FFFF, 1, 0, 0x11 }, + Package(){0x0000FFFF, 2, 0, 0x12 }, + Package(){0x0000FFFF, 3, 0, 0x13 }, + }) + + Name(PBR1, Package(){ + /* Onboard network */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(ABR1, Package(){ + /* Onboard network */ + Package(){0x0000FFFF, 0, 0, 0x11 }, + Package(){0x0000FFFF, 1, 0, 0x12 }, + Package(){0x0000FFFF, 2, 0, 0x13 }, + Package(){0x0000FFFF, 3, 0, 0x10 }, + }) + + /* SB PCI Bridge */ + Name(PCIB, Package(){ + /* PCI slots: slot 0 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + }) diff --git a/src/mainboard/asus/f2a85_m/acpi/sata.asl b/src/mainboard/asus/f2a85_m/acpi/sata.asl new file mode 100644 index 0000000..5ad3e47 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/sata.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No SATA functionality */ diff --git a/src/mainboard/asus/f2a85_m/acpi/si.asl b/src/mainboard/asus/f2a85_m/acpi/si.asl new file mode 100644 index 0000000..554b59d --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/si.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ diff --git a/src/mainboard/asus/f2a85_m/acpi/sleep.asl b/src/mainboard/asus/f2a85_m/acpi/sleep.asl new file mode 100644 index 0000000..77fd8f6 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/sleep.asl @@ -0,0 +1,100 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + + Store (0x07, UPWS) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/asus/f2a85_m/acpi/superio.asl b/src/mainboard/asus/f2a85_m/acpi/superio.asl new file mode 100644 index 0000000..ec72e36 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No Super I/O device or functionality yet */ diff --git a/src/mainboard/asus/f2a85_m/acpi/thermal.asl b/src/mainboard/asus/f2a85_m/acpi/thermal.asl new file mode 100644 index 0000000..0466a1b --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/thermal.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* No thermal zone functionality */ diff --git a/src/mainboard/asus/f2a85_m/acpi/usb_oc.asl b/src/mainboard/asus/f2a85_m/acpi/usb_oc.asl new file mode 100644 index 0000000..1e63d97 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi/usb_oc.asl @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) diff --git a/src/mainboard/asus/f2a85_m/acpi_tables.c b/src/mainboard/asus/f2a85_m/acpi_tables.c new file mode 100644 index 0000000..428721e --- /dev/null +++ b/src/mainboard/asus/f2a85_m/acpi_tables.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <console/console.h> +#include <cpu/amd/amdfam15.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write Hudson IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *alib; + acpi_header_t *ivrs; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; /* it will used by fadt */ + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ /* it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; /* it will be used by fadt */ + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); + ivrs = agesawrapper_getlateinitptr(PICK_IVRS); + if (ivrs != NULL) { + memcpy((void *)current, ivrs, ivrs->length); + ivrs = (acpi_header_t *) current; + current += ivrs->length; + acpi_add_table(rsdp, ivrs); + } else { + printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); + } + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* ALIB */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } + else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */ + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + } + else { + printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); + } + acpi_add_table(rsdp,ssdt); + + printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asus/f2a85_m/agesawrapper.c b/src/mainboard/asus/f2a85_m/agesawrapper.c new file mode 100644 index 0000000..e02ca14 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/agesawrapper.c @@ -0,0 +1,645 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "PlatformGnbPcieComplex.h" + +#include <arch/io.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/x86/mtrr.h> +#include <device/device.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <stdint.h> +#include <string.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> + + +#define FILECODE UNASSIGNED_FILE_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; +VOID *AcpiIvrs = NULL; + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*--------------------------------------------------------------------------------------- + * L O C A L F U N C T I O N S + *--------------------------------------------------------------------------------------- + */ +AGESA_STATUS agesawrapper_amdinitcpuio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of Hudson legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ + PciData |= 1 << 7; /* set NP (non-posted) bit */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; /* last address before non-posted range */ + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio(void) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + AMD_CONFIG_PARAMS StdHeader; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set ROM cache onto WP to decrease post time */ + MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; + LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; + LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + LibAmdMemFill (&AmdResetParams, + 0, + sizeof (AMD_RESET_PARAMS), + &(AmdResetParams.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_POST_PARAMS *PostParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr; + status = AmdInitPost (PostParams); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_ENV_PARAMS *EnvParam; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + status = AmdCreateStruct (&AmdParamStruct); + EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr; + + status = AmdInitEnv (EnvParam); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + case PICK_IVRS: + return AcpiIvrs; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */ + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS *AmdLateParams; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */ + AmdCreateStruct(&AmdParamStruct); + AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr; + Status = AmdInitLate(AmdLateParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParams->DmiTable; + AcpiPstate = AmdLateParams->AcpiPState; + AcpiSrat = AmdLateParams->AcpiSrat; + AcpiSlit = AmdLateParams->AcpiSlit; + + AcpiWheaMce = AmdLateParams->AcpiWheaMce; + AcpiWheaCmc = AmdLateParams->AcpiWheaCmc; + AcpiAlib = AmdLateParams->AcpiAlib; + AcpiIvrs = AmdLateParams->AcpiIvrs; + + printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x," + "AcpiSlit:%x, Mce:%x, Cmc:%x," + "Alib:%x, AcpiIvrs:%x in %s\n", + (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat, + (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc, + (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__); + + /* AmdReleaseStruct (&AmdParamStruct); */ + return Status; +} + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + LibAmdMemFill (&ApExeParams, + 0, + sizeof (AP_EXE_PARAMS), + &(ApExeParams.StdHeader)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + /* agesawrapper_amdreadeventlog(); */ + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + + +AGESA_STATUS agesawrapper_amdinitresume(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdParamStruct, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdParamStruct.StdHeader)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; +#if 1 /* TODO: Get the param from Nv storage. */ + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); +#endif + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_fchs3earlyrestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + + FchInitS3EarlyRestore(&FchParams); + + return status; +} +#endif + +AGESA_STATUS agesawrapper_amds3laterestore(void) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + agesawrapper_amdinitcpuio(); + LibAmdMemFill (&AmdS3LateParams, + 0, + sizeof (AMD_S3LATE_PARAMS), + &(AmdS3LateParams.StdHeader)); + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + +#if 1 /* TODO:Get params from Volatile storage. */ + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); +#endif + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ + +extern UINT8 picr_data[0x54], intr_data[0x54]; + +AGESA_STATUS agesawrapper_fchs3laterestore(void) +{ + AGESA_STATUS status = AGESA_SUCCESS; + + FCH_DATA_BLOCK FchParams; + AMD_CONFIG_PARAMS StdHeader; + UINT8 byte; + + StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10; + StdHeader.AltImageBasePtr = 0; + StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + StdHeader.Func = 0; + StdHeader.ImageBasePtr = 0; + + FchParams.StdHeader = &StdHeader; + s3_resume_init_data(&FchParams); + FchInitS3LateRestore(&FchParams); + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + return status; +} +#endif + +#ifndef __PRE_RAM__ + +AGESA_STATUS agesawrapper_amdS3Save(void) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + LibAmdMemFill (&AmdInterfaceParams, + 0, + sizeof (AMD_INTERFACE_PARAMS), + &(AmdInterfaceParams.StdHeader)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + + AmdCreateStruct(&AmdInterfaceParams); + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save(AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage); +#if 1 /* TODO: Save the params to NvStorage */ + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); +#endif + printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n", + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + +#if 1 /* TODO: Save the params to VolatileStorage */ + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage + ); +#endif + } + OemAgesaSaveMtrr(); + + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} + +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdreadeventlog ( + UINT8 HeapStatus + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + LibAmdMemFill (&AmdEventParams, + 0, + sizeof (EVENT_PARAMS), + &(AmdEventParams.StdHeader)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + AmdEventParams.StdHeader.HeapStatus = HeapStatus; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/asus/f2a85_m/agesawrapper.h b/src/mainboard/asus/f2a85_m/agesawrapper.h new file mode 100644 index 0000000..d4a6106 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/agesawrapper.h @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include <vendorcode/amd/agesa/f15tn/AGESA.h> + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ + PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); +AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitcpuio(void); +void *agesawrapper_getlateinitptr (int pick); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); + +AGESA_STATUS agesawrapper_fchs3earlyrestore(void); +AGESA_STATUS agesawrapper_fchs3laterestore(void); + +#endif diff --git a/src/mainboard/asus/f2a85_m/board_info.txt b/src/mainboard/asus/f2a85_m/board_info.txt new file mode 100644 index 0000000..b68541c --- /dev/null +++ b/src/mainboard/asus/f2a85_m/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_Socket_FM2/F2A85M/ +ROM package: DIP8 +ROM protocol: [http://www.winbond-usa.com/hq/enu/ProductAndSales/ProductLines/FlashMemory/S... SPI] +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/f2a85_m/buildOpts.c b/src/mainboard/asus/f2a85_m/buildOpts.c new file mode 100644 index 0000000..cd1c812 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/buildOpts.c @@ -0,0 +1,511 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> + +#include <vendorcode/amd/agesa/f15tn/AGESA.h> + +/* Include the files that instantiate the configuration definitions. */ +#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> +#include <vendorcode/amd/agesa/f15tn/Include/CommonReturns.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> +/* the next two headers depend on heapManager.h */ +#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> +#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> +/* These tables are optional and may be used to adjust memory timing settings */ +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> +#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> + +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT FALSE +#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP2_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT FALSE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +#define INSTALL_FM2_SOCKET_SUPPORT TRUE + +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE +#define BLDOPT_REMOVE_SRAT FALSE //TRUE +#define BLDOPT_REMOVE_SLIT FALSE //TRUE +#define BLDOPT_REMOVE_WHEA FALSE //TRUE +#define BLDOPT_REMOVE_CRAT TRUE +#define BLDOPT_REMOVE_DMI TRUE +//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE +//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE + +//This element selects whether P-States should be forced to be independent, +// as reported by the ACPI _PSD object. For single-link processors, +// setting TRUE for OS to support this feature. + +//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER +/* Build configuration values here. + */ +#define BLDCFG_VRM_CURRENT_LIMIT 90000 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 +#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 +#define BLDCFG_PLAT_NUM_IO_APICS 3 +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_MEM_INIT_PSTATE 0 + +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE + +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +#define BLDCFG_ONLINE_SPARE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +#define BLDCFG_ENABLE_ECC_FEATURE FALSE +#define BLDCFG_ECC_REDIRECTION FALSE +#define BLDCFG_SCRUB_DRAM_RATE 0 +#define BLDCFG_SCRUB_L2_RATE 0 +#define BLDCFG_SCRUB_L3_RATE 0 +#define BLDCFG_SCRUB_IC_RATE 0 +#define BLDCFG_SCRUB_DC_RATE 0 +#define BLDCFG_ECC_SYMBOL_SIZE 4 +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_ECC_SYNC_FLOOD FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 + +#define BLDOPT_REMOVE_ALIB FALSE +#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled +#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' +#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 + +#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 +#define BLDCFG_CFG_ABM_SUPPORT 0 + +//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 + +// Specify the default values for the VRM controlling the VDDNB plane. +// If not specified, the values used for the core VRM will be applied +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity + +#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 + +#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 +#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 + +#if CONFIG_GFXUMA +#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED +#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED +//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ +#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#endif + +#define BLDCFG_IOMMU_SUPPORT FALSE + +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE +//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID +//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID +//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID + +/* Process the options... + * This file include MUST occur AFTER the user option selection settings + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE +/* + * Customized OEM build configurations for FCH component + */ +// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 +// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 +// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 +// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 +// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 +// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 +// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 +// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 +// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 +// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 +// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 +// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 +// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 +// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 +// #define BLDCFG_AZALIA_SSID 0x780D1022 +// #define BLDCFG_SMBUS_SSID 0x780B1022 +// #define BLDCFG_IDE_SSID 0x780C1022 +// #define BLDCFG_SATA_AHCI_SSID 0x78011022 +// #define BLDCFG_SATA_IDE_SSID 0x78001022 +// #define BLDCFG_SATA_RAID5_SSID 0x78031022 +// #define BLDCFG_SATA_RAID_SSID 0x78021022 +// #define BLDCFG_EHCI_SSID 0x78081022 +// #define BLDCFG_OHCI_SSID 0x78071022 +// #define BLDCFG_LPC_SSID 0x780E1022 +// #define BLDCFG_SD_SSID 0x78061022 +// #define BLDCFG_XHCI_SSID 0x78121022 +// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE +// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 +// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE +// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE +// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE + +CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, + { CPU_LIST_TERMINAL } +}; + +#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList + + // This is the delivery package title, "BrazosPI" + // This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + + // This is the release version number of the AGESA component + // This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define DDR2100_FREQUENCY 1050 ///< DDR 2100 +#define DDR2133_FREQUENCY 1066 ///< DDR 2133 +#define DDR2400_FREQUENCY 1200 ///< DDR 2400 +#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 +#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ +#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 +#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 +#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 +#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 +#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 +#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 +#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 +#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 +#define DFLT_HPET_BASE_ADDRESS 0xFED00000 +#define DFLT_SMI_CMD_PORT 0xB0 +#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 +#define DFLT_GEC_BASE_ADDRESS 0xFED61000 +#define DFLT_AZALIA_SSID 0x780D1022 +#define DFLT_SMBUS_SSID 0x780B1022 +#define DFLT_IDE_SSID 0x780C1022 +#define DFLT_SATA_AHCI_SSID 0x78011022 +#define DFLT_SATA_IDE_SSID 0x78001022 +#define DFLT_SATA_RAID5_SSID 0x78031022 +#define DFLT_SATA_RAID_SSID 0x78021022 +#define DFLT_EHCI_SSID 0x78081022 +#define DFLT_OHCI_SSID 0x78071022 +#define DFLT_LPC_SSID 0x780E1022 +#define DFLT_SD_SSID 0x78061022 +#define DFLT_XHCI_SSID 0x78121022 +#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE +#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE +#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 +#define DFLT_FCH_GPP_PORT0_PRESENT TRUE +#define DFLT_FCH_GPP_PORT1_PRESENT TRUE +#define DFLT_FCH_GPP_PORT2_PRESENT FALSE +#define DFLT_FCH_GPP_PORT3_PRESENT FALSE +#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE +#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE +//#define BLDCFG_IR_PIN_CONTROL 0x33 +//#define FCH_NO_XHCI_SUPPORT FALSE +GPIO_CONTROL f2a85_m_gpio[] = { +// {183, Function1, PullUpB}, + {-1} +}; +#define BLDCFG_FCH_GPIO_CONTROL_LIST (&f2a85_m_gpio[0]) + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +/* Moving this include up will break AGESA. */ +#include <vendorcode/amd/agesa/f15tn/Include/PlatformInstall.h> + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Speicifes the HW RXEN training seed for a channel of a socket + // + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), +/* + TODO: is this OK for DDR3 socket FM2? + MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), + ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), + CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + */ + PSO_END +}; + +// Customer table +UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +UINT8 SizeOfTableTN = ARRAY_SIZE(AGESA_MEM_TABLE_TN); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/asus/f2a85_m/cmos.layout b/src/mainboard/asus/f2a85_m/cmos.layout new file mode 100644 index 0000000..5520564 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/cmos.layout @@ -0,0 +1,114 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/f2a85_m/devicetree.cb b/src/mainboard/asus/f2a85_m/devicetree.cb new file mode 100644 index 0000000..9ac5574 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/devicetree.cb @@ -0,0 +1,139 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2012 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family15tn/root_complex + + device cpu_cluster 0 on + chip cpu/amd/agesa/family15tn + device lapic 10 on end + end + end + + device domain 0 on + subsystemid 0x1022 0x1410 inherit + chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + + chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIE SLOT0 x16 blue + device pci 3.0 off end # unused? + device pci 4.0 on end # PCIE 4x black + device pci 5.0 off end # unused? + device pci 6.0 off end # unused? + device pci 7.0 off end # LAN + device pci 8.0 off end # NB/SB Link P2P bridge + end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex + + chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus + device pci 10.0 on end # XHCI HC0 + device pci 10.1 on end # XHCI HC1 + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SMBUS + chip drivers/generic/generic #dimm 0 + device i2c 50 on end # 7-bit SPD address + end + chip drivers/generic/generic #dimm 1 + device i2c 51 on end # 7-bit SPD address + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8728f + register hwm_ctl_register = "0xc0" + register hwm_main_ctl_register = "0x33" + register hwm_adc_temp_chan_en_reg = "0x38" + register hwm_fan1_ctl_pwm = "0x00" + register hwm_fan2_ctl_pwm = "0x00" + register hwm_fan3_ctl_pwm = "0x00" + + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Env Controller + io 0x60 = 0x290 + io 0x62 = 0x220 + irq 0x70 = 0 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 off # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x60 = 0x228 #SMI + io 0x62 = 0x300 #Simple I/O + io 0x64 = 0x238 #Phony resource IT8603E does not have it + irq 0x70 = 0 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8728f + end #device pci 14.3 # LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + # SD, make it on so the BAR is assigned (if proper hudson on/off handling is implemented this may go away) + device pci 14.7 on end + device pci 15.0 on end # PCIe 0 - onboard PCIe 1x + device pci 15.1 on end # PCIe 1 onboard gigabit + device pci 15.2 off end # unused + device pci 15.3 off end # unused + + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + register "gpp_configuration" = "4" + end #chip southbridge/amd/hudson + + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex + end #domain +end #chip northbridge/amd/agesa/family15tn/root_complex diff --git a/src/mainboard/asus/f2a85_m/dsdt.asl b/src/mainboard/asus/f2a85_m/dsdt.asl new file mode 100644 index 0000000..a1a95b2 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/dsdt.asl @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASUS ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Globals for the platform */ + #include "acpi/mainboard.asl" + + /* Describe the USB Overcurrent pins */ + #include "acpi/usb_oc.asl" + + /* PCI IRQ mapping for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pcie.asl> + + /* Describe the processor tree (_PR) */ + #include <cpu/amd/agesa/family15tn/acpi/cpu.asl> + + /* Describe the supported Sleep States for this Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl> + + /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */ + #include "acpi/sleep.asl" + + Scope(_SB) { + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + /* Describe IRQ Routing mapping for this platform (within the _SB scope) */ + #include "acpi/routing.asl" + + Device(PWRB) { + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) + Name(_STA, 0x0B) + } + + Device(PCI0) { + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/fch.asl> + + /** + * TODO: The devices listed here (SBR0 and SBR1) do not appear to + * be referenced anywhere and could possibly be removed. + */ + Device(SBR0) { /* PCIe 1x SB */ + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(ABR0) } /* APIC mode */ + Return (PBR0) /* PIC mode */ + } + } + + Device(SBR1) { /* Onboard network */ + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT, 0) { + If(PMOD){ Return(ABR1) } /* APIC mode */ + Return (PBR1) /* PIC mode */ + } + } + } + + /* Describe PCI INT[A-H] for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl> + + } /* End Scope(_SB) */ + + /* Describe SMBUS for the Southbridge */ + #include <southbridge/amd/agesa/hudson/acpi/smbus.asl> + + /* Define the General Purpose Events for the platform */ + #include "acpi/gpe.asl" + + /* Define the Thermal zones and methods for the platform */ + #include "acpi/thermal.asl" + + /* Define the System Indicators for the platform */ + #include "acpi/si.asl" + +} +/* End of ASL file */ diff --git a/src/mainboard/asus/f2a85_m/irq_tables.c b/src/mainboard/asus/f2a85_m/irq_tables.c new file mode 100644 index 0000000..0bab5c9 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/irq_tables.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <cpu/amd/amdfam15.h> +#include <device/pci_def.h> +#include <stdint.h> +#include <string.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asus/f2a85_m/mainboard.c b/src/mainboard/asus/f2a85_m/mainboard.c new file mode 100644 index 0000000..191eea8 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/mainboard.c @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> + +#include <arch/acpi.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/x86/msr.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> + +/************************************************* + * enable the dedicated function in thatcher board. + *************************************************/ +static void mainboard_enable(device_t dev) +{ + msr_t msr; + + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + msr = rdmsr(0xC0011020); + msr.lo &= ~(1 << 28); + wrmsr(0xC0011020, msr); + + msr = rdmsr(0xC0011022); + msr.lo &= ~(1 << 4); + msr.lo &= ~(1 << 13); + wrmsr(0xC0011022, msr); + + msr = rdmsr(0xC0011023); + msr.lo &= ~(1 << 23); + wrmsr(0xC0011023, msr); + + if (acpi_is_wakeup_s3()) + agesawrapper_fchs3earlyrestore(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/f2a85_m/mptable.c b/src/mainboard/asus/f2a85_m/mptable.c new file mode 100644 index 0000000..cc81819 --- /dev/null +++ b/src/mainboard/asus/f2a85_m/mptable.c @@ -0,0 +1,188 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/smp/mpspec.h> +#include <cpu/amd/amdfam15.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <stdint.h> +#include <string.h> +#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */ + + +u8 picr_data[] = { + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F +}; +u8 intr_data[0x54] = { + 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length) +{ + mc->mpc_length += length; + mc->mpc_entry_count++; +} + +static void my_smp_write_bus(struct mp_config_table *mc, + unsigned char id, const char *bustype) +{ + struct mpc_config_bus *mpc; + mpc = smp_next_mpc_entry(mc); + memset(mpc, '\0', sizeof(*mpc)); + mpc->mpc_type = MP_BUS; + mpc->mpc_busid = id; + memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype)); + smp_add_mpc_entry(mc, sizeof(*mpc)); +} + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 byte; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + //mptable_write_buses(mc, NULL, &bus_isa); + my_smp_write_bus(mc, 0, "PCI "); + my_smp_write_bus(mc, 1, "PCI "); + bus_isa = 0x02; + my_smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + /* PIC IRQ routine */ + for (byte = 0x0; byte < sizeof(picr_data); byte ++) { + outb(byte, 0xC00); + outb(picr_data[byte], 0xC01); + } + + /* APIC IRQ routine */ + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, int_sign, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin)) + + /* IOMMU */ + PCI_INT(0x0, 0x0, 0x0, 0x10); + PCI_INT(0x0, 0x0, 0x1, 0x11); + PCI_INT(0x0, 0x0, 0x2, 0x12); + PCI_INT(0x0, 0x0, 0x3, 0x13); + + /* Internal VGA */ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + /* SMBUS */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* HD Audio */ + PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]); + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + } + + /* PCIe Lan*/ + PCI_INT(0x0, 0x06, 0x0, 0x13); + + /* FCH PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* FCH PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* FCH PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* FCH PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/f2a85_m/romstage.c b/src/mainboard/asus/f2a85_m/romstage.c new file mode 100644 index 0000000..caa32ca --- /dev/null +++ b/src/mainboard/asus/f2a85_m/romstage.c @@ -0,0 +1,157 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> + +#include <arch/acpi.h> +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include "cpu/amd/car.h" +#include <cpu/x86/bist.h> +#include <cpu/x86/lapic.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <device/pnp_def.h> +#include <southbridge/amd/agesa/hudson/hudson.h> +#include <southbridge/amd/agesa/hudson/smbus.h> +#include <stdint.h> +#include <string.h> +#include <superio/ite/common/ite.h> +#include <superio/ite/it8728f/it8728f.h> + +#define MMIO_NON_POSTED_START 0xfed00000 +#define MMIO_NON_POSTED_END 0xfedfffff +#define SB_MMIO 0xFED80000 +#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x)) + +#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO) + +static void sbxxx_enable_48mhzout(void) +{ + /* most likely programming to 48MHz out signal */ + u32 reg32; + reg32 = SB_MMIO_MISC32(0x28); + reg32 &= 0xffc7ffff; + reg32 |= 0x00100000; + SB_MMIO_MISC32(0x28) = reg32; + + reg32 = SB_MMIO_MISC32(0x40); + reg32 &= ~0x80u; + SB_MMIO_MISC32(0x40) = reg32; +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + u8 byte; + device_t dev; + +#if IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE) + hudson_pci_port80(); +#endif +#if IS_ENABLED(CONFIG_POST_DEVICE_LPC) + hudson_lpc_port80(); +#endif + + AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); + + if (!cpu_init_detectedx && boot_cpu()) { + + /* enable SIO LPC decode */ + dev = PCI_DEV(0, 0x14, 3); + byte = pci_read_config8(dev, 0x48); + byte |= 3; /* 2e, 2f */ + pci_write_config8(dev, 0x48, byte); + + /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + + post_code(0x30); + + /* enable SB MMIO space */ + outb(0x24, 0xcd6); + outb(0x1, 0xcd7); + + /* enable SIO clock */ + sbxxx_enable_48mhzout(); + ite_kill_watchdog(GPIO_DEV); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_enable_3vsbsw(GPIO_DEV); + console_init(); + + /* turn on secondary smbus at b20 */ + outb(0x28, 0xcd6); + byte = inb(0xcd7); + byte |= 1; + outb(byte, 0xcd7); + + /* set DDR3 voltage */ + byte = CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_VAL; + + /* default is byte = 0x0, so no need to set it in this case */ + if (byte) + do_smbus_write_byte(0xb20, 0x15, 0x3, byte); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + post_code(0x39); + + AGESAWRAPPER(amdinitearly); + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + AGESAWRAPPER(amdinitpost); + post_code(0x41); + AGESAWRAPPER(amdinitenv); + disable_cache_as_ram(); + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/asus/k8v-x/Kconfig b/src/mainboard/asus/k8v-x/Kconfig deleted file mode 100644 index 0e829f0..0000000 --- a/src/mainboard/asus/k8v-x/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if BOARD_ASUS_K8V_X - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_754 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD - select SUPERIO_WINBOND_W83697HF - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select RAMINIT_SYSINFO - select SET_FIDVID - select K8_FORCE_2T_DRAM_TIMING - -config MAINBOARD_DIR - string - default asus/k8v-x - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "K8V-X" - -config AGP_APERTURE_SIZE - hex - default 0x10000000 - -config HW_MEM_HOLE_SIZEK - hex - default 0 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HEAP_SIZE - hex - default 0x40000 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -endif # BOARD_ASUS_K8V_X diff --git a/src/mainboard/asus/k8v-x/acpi_tables.c b/src/mainboard/asus/k8v-x/acpi_tables.c deleted file mode 100644 index 1c48a95..0000000 --- a/src/mainboard/asus/k8v-x/acpi_tables.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8x8xx.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/k8v-x/board_info.txt b/src/mainboard/asus/k8v-x/board_info.txt deleted file mode 100644 index 31cf750..0000000 --- a/src/mainboard/asus/k8v-x/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: desktop diff --git a/src/mainboard/asus/k8v-x/cmos.layout b/src/mainboard/asus/k8v-x/cmos.layout deleted file mode 100644 index 0afe66a..0000000 --- a/src/mainboard/asus/k8v-x/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/k8v-x/devicetree.cb b/src/mainboard/asus/k8v-x/devicetree.cb deleted file mode 100644 index 6bb9bc8..0000000 --- a/src/mainboard/asus/k8v-x/devicetree.cb +++ /dev/null @@ -1,98 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_754 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0" # Enable SB functions - register "fn_ctrl_hi" = "0xad" # Enable SB functions - register "usb2_termination_set" = "1" - register "usb2_termination_a" = "8" - register "usb2_termination_b" = "8" - register "usb2_termination_c" = "6" - register "usb2_termination_d" = "6" - register "usb2_termination_e" = "6" - register "usb2_termination_f" = "6" - register "usb2_termination_g" = "6" - register "usb2_termination_h" = "6" - register "usb2_dpll_set" = "1" - register "usb2_dpll_delay" = "3" - register "int_efgh_as_gpio" = "1" - register "enable_gpo3" = "1" - register "disable_gpo26_gpo27" = "1" - register "enable_aol_2_smb_slave" = "1" - register "enable_gpo5" = "1" - register "gpio15_12_dir_output" = "1" - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 10.4 on end # USB2 - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip superio/winbond/w83697hf # Super I/O - register "hwmon_fan1_divisor" = "128" - register "hwmon_fan2_divisor" = "4" - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 (N/A on this board) - end - device pnp 2e.6 off # CIR - end - device pnp 2e.7 off # Game port/GPIO 1 - end - device pnp 2e.8 off # MIDI/GPIO 5 - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 12.0 off end # VIA LAN (off, other chip used) - end - chip southbridge/via/k8t890 # "Southbridge" K8T890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/k8v-x/dsdt.asl b/src/mainboard/asus/k8v-x/dsdt.asl deleted file mode 100644 index 76c7abd..0000000 --- a/src/mainboard/asus/k8v-x/dsdt.asl +++ /dev/null @@ -1,186 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP slot, effectively */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ - Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ - Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ - Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x000EFFFF, 0x00, 0x00, 0x13 }, /* Slot 0xE */ - Package (0x04) { 0x000EFFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x000EFFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x000EFFFF, 0x03, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x10 }, /* Slot 0x9 */ - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x11 }, /* Marvell 88E8001 ethernet */ - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 } /* AC97, MC97 */ - }) - - Device (ISA) { - Name (_ADR, 0x00110000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - } - } -} diff --git a/src/mainboard/asus/k8v-x/mainboard.c b/src/mainboard/asus/k8v-x/mainboard.c deleted file mode 100644 index cd45213..0000000 --- a/src/mainboard/asus/k8v-x/mainboard.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2010 Tobias Diedrich ranma+coreboot@tdiedrich.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include "southbridge/via/vt8237r/vt8237r.h" - -u32 vt8237_ide_80pin_detect(struct device *dev) -{ - device_t lpc_dev; - u16 acpi_io_base; - u32 gpio_in; - u32 res; - - lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC, 0); - if (!lpc_dev) - return 0; - - acpi_io_base = pci_read_config16(lpc_dev, 0x88) & ~1; - if (!acpi_io_base) - return 0; - - /* select function GPIO29 for pin AB9 */ - pci_write_config8(lpc_dev, 0xe5, pci_read_config8(lpc_dev, 0xe5) | 0x08); - - gpio_in = inl(acpi_io_base + 0x48); - /* bit 29 for primary port, clear if unconnected or 80-pin cable */ - res = gpio_in & (1<<29) ? 0 : VT8237R_IDE0_80PIN_CABLE; - /* bit 8 for secondary port, clear if unconnected or 80-pin cable */ - res |= gpio_in & (1<<8) ? 0 : VT8237R_IDE1_80PIN_CABLE; - - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "primary", - res & VT8237R_IDE0_80PIN_CABLE ? 80 : 40); - printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "secondary", - res & VT8237R_IDE1_80PIN_CABLE ? 80 : 40); - - return res; -} diff --git a/src/mainboard/asus/k8v-x/mptable.c b/src/mainboard/asus/k8v-x/mptable.c deleted file mode 100644 index 794194c..0000000 --- a/src/mainboard/asus/k8v-x/mptable.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <stdint.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8x8xx.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); - smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); - - mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/k8v-x/romstage.c b/src/mainboard/asus/k8v-x/romstage.c deleted file mode 100644 index 15b8682..0000000 --- a/src/mainboard/asus/k8v-x/romstage.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/early_ht.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83697hf/w83697hf.h> -#include "southbridge/via/vt8237r/early_smbus.c" -#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <reset.h> -void soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - print_debug("soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - while (1) { - /* daisy daisy ... */ - hlt(); - } -} - -#include "southbridge/via/k8t890/early_car.c" -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -unsigned int get_sbdn(unsigned bus) -{ - device_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM1, DIMM2, 0, - 0, 0, 0, 0, - // Node 1 - 0, 0, 0, 0, - 0, 0, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - - print_info("now booting... fallback\n"); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - } - - print_info("now booting... real_main\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - print_info("now booting... Core0 started\n"); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= k8t890_early_setup_ht(); - - if (needs_reset) { - print_debug("ht reset -\n"); - soft_reset(); - } - - /* the HT settings needs to be OK, because link freq change may cause HT disconnect */ - vt8237_sb_enable_fid_vid(); - enable_fid_change(); - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* this seems to be some GPIO on the SMBus--in any case, setting these - * two bits reduces the pullup impedance of the bus lines and is required - * in order to be able to read SPD info */ - smbus_write_byte(0x48, 0x07, smbus_read_byte(0x48, 0x07) | 0x80); - smbus_write_byte(0x4a, 0x07, smbus_read_byte(0x4a, 0x07) | 0x10); - - unsigned char mask; - - mask = 0; -// mask |= 1 /* AGP voltage 1.7 V (not verified, just vendor BIOS value) */ -// mask |= 2 /* V-Link voltage 2.6 V (not verified either) */ - smbus_write_byte(0x4a, 0x00, (smbus_read_byte(0x4a, 0x00) & ~0x0f) | (0x0f ^ (mask << 2))); - smbus_write_byte(0x4a, 0x01, (smbus_read_byte(0x4a, 0x01) & ~0x03) | (0x03 ^ mask)); - - mask = 25; /* RAM voltage in decivolts, valid range from 25 to 28 */ - mask = 3 - (mask - 25); - smbus_write_byte(0x4a, 0x02, 0x4f | (mask << 4)); - smbus_write_byte(0x4a, 0x03, 0x04 | mask); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); -} diff --git a/src/mainboard/asus/k8v_x/Kconfig b/src/mainboard/asus/k8v_x/Kconfig new file mode 100644 index 0000000..7a11401 --- /dev/null +++ b/src/mainboard/asus/k8v_x/Kconfig @@ -0,0 +1,71 @@ +if BOARD_ASUS_K8V_X + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_754 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_VIA_VT8237R + select SOUTHBRIDGE_VIA_K8T890 + select SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD + select SUPERIO_WINBOND_W83697HF + select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select RAMINIT_SYSINFO + select SET_FIDVID + select K8_FORCE_2T_DRAM_TIMING + +config MAINBOARD_DIR + string + default asus/k8v_x + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x4000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "K8V-X" + +config AGP_APERTURE_SIZE + hex + default 0x10000000 + +config HW_MEM_HOLE_SIZEK + hex + default 0 + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HEAP_SIZE + hex + default 0x40000 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +endif # BOARD_ASUS_K8V_X diff --git a/src/mainboard/asus/k8v_x/acpi_tables.c b/src/mainboard/asus/k8v_x/acpi_tables.c new file mode 100644 index 0000000..1c48a95 --- /dev/null +++ b/src/mainboard/asus/k8v_x/acpi_tables.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8x8xx.h" +#include "northbridge/amd/amdk8/acpi.h" +#include <cpu/amd/powernow.h> +#include <cpu/amd/amdk8_sysconf.h> + +void get_bus_conf(void) +{ + /* FIXME: implement this. */ +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/asus/k8v_x/board_info.txt b/src/mainboard/asus/k8v_x/board_info.txt new file mode 100644 index 0000000..31cf750 --- /dev/null +++ b/src/mainboard/asus/k8v_x/board_info.txt @@ -0,0 +1 @@ +Category: desktop diff --git a/src/mainboard/asus/k8v_x/cmos.layout b/src/mainboard/asus/k8v_x/cmos.layout new file mode 100644 index 0000000..0afe66a --- /dev/null +++ b/src/mainboard/asus/k8v_x/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/k8v_x/devicetree.cb b/src/mainboard/asus/k8v_x/devicetree.cb new file mode 100644 index 0000000..6bb9bc8 --- /dev/null +++ b/src/mainboard/asus/k8v_x/devicetree.cb @@ -0,0 +1,98 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_754 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0" # Enable SB functions + register "fn_ctrl_hi" = "0xad" # Enable SB functions + register "usb2_termination_set" = "1" + register "usb2_termination_a" = "8" + register "usb2_termination_b" = "8" + register "usb2_termination_c" = "6" + register "usb2_termination_d" = "6" + register "usb2_termination_e" = "6" + register "usb2_termination_f" = "6" + register "usb2_termination_g" = "6" + register "usb2_termination_h" = "6" + register "usb2_dpll_set" = "1" + register "usb2_dpll_delay" = "3" + register "int_efgh_as_gpio" = "1" + register "enable_gpo3" = "1" + register "disable_gpo26_gpo27" = "1" + register "enable_aol_2_smb_slave" = "1" + register "enable_gpo5" = "1" + register "gpio15_12_dir_output" = "1" + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 10.4 on end # USB2 + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip superio/winbond/w83697hf # Super I/O + register "hwmon_fan1_divisor" = "128" + register "hwmon_fan2_divisor" = "4" + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + end + device pnp 2e.6 off # CIR + end + device pnp 2e.7 off # Game port/GPIO 1 + end + device pnp 2e.8 off # MIDI/GPIO 5 + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/k8v_x/dsdt.asl b/src/mainboard/asus/k8v_x/dsdt.asl new file mode 100644 index 0000000..76c7abd --- /dev/null +++ b/src/mainboard/asus/k8v_x/dsdt.asl @@ -0,0 +1,186 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP slot, effectively */ + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ + Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ + Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ + Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x000EFFFF, 0x00, 0x00, 0x13 }, /* Slot 0xE */ + Package (0x04) { 0x000EFFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x000EFFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x000EFFFF, 0x03, 0x00, 0x12 }, + Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x10 }, /* Slot 0x9 */ + Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x11 }, /* Marvell 88E8001 ethernet */ + Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ + Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 } /* AC97, MC97 */ + }) + + Device (ISA) { + Name (_ADR, 0x00110000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + /* Dummy device to hold auto generated reserved resources */ + Device(MBRS) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + External(_CRS) /* Resource Template in SSDT */ + } + + } + } +} diff --git a/src/mainboard/asus/k8v_x/mainboard.c b/src/mainboard/asus/k8v_x/mainboard.c new file mode 100644 index 0000000..cd45213 --- /dev/null +++ b/src/mainboard/asus/k8v_x/mainboard.c @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2010 Tobias Diedrich ranma+coreboot@tdiedrich.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include "southbridge/via/vt8237r/vt8237r.h" + +u32 vt8237_ide_80pin_detect(struct device *dev) +{ + device_t lpc_dev; + u16 acpi_io_base; + u32 gpio_in; + u32 res; + + lpc_dev = dev_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC, 0); + if (!lpc_dev) + return 0; + + acpi_io_base = pci_read_config16(lpc_dev, 0x88) & ~1; + if (!acpi_io_base) + return 0; + + /* select function GPIO29 for pin AB9 */ + pci_write_config8(lpc_dev, 0xe5, pci_read_config8(lpc_dev, 0xe5) | 0x08); + + gpio_in = inl(acpi_io_base + 0x48); + /* bit 29 for primary port, clear if unconnected or 80-pin cable */ + res = gpio_in & (1<<29) ? 0 : VT8237R_IDE0_80PIN_CABLE; + /* bit 8 for secondary port, clear if unconnected or 80-pin cable */ + res |= gpio_in & (1<<8) ? 0 : VT8237R_IDE1_80PIN_CABLE; + + printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "primary", + res & VT8237R_IDE0_80PIN_CABLE ? 80 : 40); + printk(BIOS_INFO, "Cable on %s PATA port: %d pin\n", "secondary", + res & VT8237R_IDE1_80PIN_CABLE ? 80 : 40); + + return res; +} diff --git a/src/mainboard/asus/k8v_x/mptable.c b/src/mainboard/asus/k8v_x/mptable.c new file mode 100644 index 0000000..794194c --- /dev/null +++ b/src/mainboard/asus/k8v_x/mptable.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <stdint.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8x8xx.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); + smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); + + mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/k8v_x/romstage.c b/src/mainboard/asus/k8v_x/romstage.c new file mode 100644 index 0000000..15b8682 --- /dev/null +++ b/src/mainboard/asus/k8v_x/romstage.c @@ -0,0 +1,190 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83697hf/w83697hf.h> +#include "southbridge/via/vt8237r/early_smbus.c" +#include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include <reset.h> +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset\n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +#include "southbridge/via/k8t890/early_car.c" +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + DIMM0, DIMM1, DIMM2, 0, + 0, 0, 0, 0, + // Node 1 + 0, 0, 0, 0, + 0, 0, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = &sysinfo_car; + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + enable_rom_decode(); + + print_info("now booting... fallback\n"); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + } + + print_info("now booting... real_main\n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + print_info("now booting... Core0 started\n"); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= k8t890_early_setup_ht(); + + if (needs_reset) { + print_debug("ht reset -\n"); + soft_reset(); + } + + /* the HT settings needs to be OK, because link freq change may cause HT disconnect */ + vt8237_sb_enable_fid_vid(); + enable_fid_change(); + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + /* this seems to be some GPIO on the SMBus--in any case, setting these + * two bits reduces the pullup impedance of the bus lines and is required + * in order to be able to read SPD info */ + smbus_write_byte(0x48, 0x07, smbus_read_byte(0x48, 0x07) | 0x80); + smbus_write_byte(0x4a, 0x07, smbus_read_byte(0x4a, 0x07) | 0x10); + + unsigned char mask; + + mask = 0; +// mask |= 1 /* AGP voltage 1.7 V (not verified, just vendor BIOS value) */ +// mask |= 2 /* V-Link voltage 2.6 V (not verified either) */ + smbus_write_byte(0x4a, 0x00, (smbus_read_byte(0x4a, 0x00) & ~0x0f) | (0x0f ^ (mask << 2))); + smbus_write_byte(0x4a, 0x01, (smbus_read_byte(0x4a, 0x01) & ~0x03) | (0x03 ^ mask)); + + mask = 25; /* RAM voltage in decivolts, valid range from 25 to 28 */ + mask = 3 - (mask - 25); + smbus_write_byte(0x4a, 0x02, 0x4f | (mask << 4)); + smbus_write_byte(0x4a, 0x03, 0x04 | mask); + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/m2n-e/Kconfig b/src/mainboard/asus/m2n-e/Kconfig deleted file mode 100644 index 7292bf3..0000000 --- a/src/mainboard/asus/m2n-e/Kconfig +++ /dev/null @@ -1,88 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_ASUS_M2N_E - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_ITE_IT8716F - select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default asus/m2n-e - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "M2N-E" - -config PCI_64BIT_PREF_MEM - bool - default n - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -endif # BOARD_ASUS_M2N_E diff --git a/src/mainboard/asus/m2n-e/Makefile.inc b/src/mainboard/asus/m2n-e/Makefile.inc deleted file mode 100644 index b8477db..0000000 --- a/src/mainboard/asus/m2n-e/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/asus/m2n-e/board_info.txt b/src/mainboard/asus/m2n-e/board_info.txt deleted file mode 100644 index 44a2b8c..0000000 --- a/src/mainboard/asus/m2n-e/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2NE/ -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m2n-e/cmos.layout b/src/mainboard/asus/m2n-e/cmos.layout deleted file mode 100644 index fedb8c8..0000000 --- a/src/mainboard/asus/m2n-e/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m2n-e/devicetree.cb b/src/mainboard/asus/m2n-e/devicetree.cb deleted file mode 100644 index bbe2124..0000000 --- a/src/mainboard/asus/m2n-e/devicetree.cb +++ /dev/null @@ -1,121 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x8239 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 (N/A) - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - io 0x62 = 0x000 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x000 - irq 0x70 = 0 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 # PS/2 mouse IRQ - end - device pnp 2e.7 off # GPIO - io 0x60 = 0x0000 # SMI# Normal Run Access - io 0x62 = 0x800 # Simple I/O - io 0x64 = 0x0000 # Serial Flash I/F - end - device pnp 2e.8 off # MIDI (N/A) - end - device pnp 2e.9 off # Game port (N/A) - end - device pnp 2e.a off # Consumer IR (N/A) - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # Azalia (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A) - device pci a.0 on end # PCI E 5 (PCIEX4) - device pci b.0 off end # PCI E 4 - device pci c.0 on end # PCI E 3 (PCIEX1_2) - device pci d.0 on end # PCI E 2 (PCIEX1_1) - device pci e.0 off end # PCI E 1 - device pci f.0 on end # PCI E 0 (PCIEX16_1) - register "ide0_enable" = "1" # Primary IDE - register "ide1_enable" = "0" # Secondary IDE (N/A) - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/m2n-e/fanctl.c b/src/mainboard/asus/m2n-e/fanctl.c deleted file mode 100644 index bcee1d3..0000000 --- a/src/mainboard/asus/m2n-e/fanctl.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * The ASUS M2N-E has 6 different fans, connected to two different chips: - * - ITE IT8716F: fan1 = CPU_FAN, fan2 = CHA_FAN1, fan3 = PWR_FAN1 - * - Analog Devices ADT7475: fan1 = CHA_FAN4, fan2 = CHA_FAN2, fan3 = CHA_FAN3 - */ - -#include <arch/io.h> -#include <stdlib.h> -#include <superio/ite/it8716f/it8716f.h> - -static void write_index(u16 port, u8 reg, u8 value) -{ - outb(reg, port); - outb(value, port + 1); -} - -static const struct { - u8 index; - u8 value; -} sequence[] = { - /* Enable startup of monitoring operations. */ - { 0x00, 0x11}, - /* Polarity active-high, PWM frequency 23.43KHz, activate fans 1-3. */ - { 0x14, 0xd7}, - /* Set the correct sensor types. TMPIN1: diode, TMPIN2/3: resistor. */ - { 0x51, 0x31}, - /* Fan1 (CPU_FAN) is software-controlled. */ - { 0x15, 0x7f}, - /* Fan2 (CHA_FAN1) is software-controlled. */ - { 0x16, 0x7f}, - /* Fan3 (PWR_FAN1) is software-controlled. */ - { 0x17, 0x7f}, - /* Enable fan1/2/3, select "on/off mode" for all of them. */ - { 0x13, 0x70}, -}; - -/* Called from src/ite/it8716f/superio.c. */ -void init_ec(u16 base) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sequence); i++) - write_index(base, sequence[i].index, sequence[i].value); -} diff --git a/src/mainboard/asus/m2n-e/get_bus_conf.c b/src/mainboard/asus/m2n-e/get_bus_conf.c deleted file mode 100644 index fd7d304..0000000 --- a/src/mainboard/asus/m2n-e/get_bus_conf.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ -// busnum is default. -unsigned char bus_mcp55[8]; // 1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { - /* Here you only need to set value in pci1234 for HT-IO that could - * be installed or not. You may need to preset pci1234 for HTIO board, - * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. - */ - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { - /* HT Chain device num, actually it is unit id base of every ht - * device in chain, assume every chain only have 4 ht device at most. - */ - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned int apicid_base, sbdn; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) - bus_mcp55[i] = 0; - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, " - "using defaults\n", sbdn + 0x06); - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_mcp55 = apicid_base + 0; -} diff --git a/src/mainboard/asus/m2n-e/hda_verb.c b/src/mainboard/asus/m2n-e/hda_verb.c deleted file mode 100644 index 2f8fe87..0000000 --- a/src/mainboard/asus/m2n-e/hda_verb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * HDA codec soldered onto the ASUS M2N-E: - * Analog Devices AD1988B (High Definition Audio SoundMAX Codec), rev. 0x100200 - * http://www.analog.com/static/imported-files/data_sheets/AD1988A_1988B.pdf - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x11d4198b, /* Codec Vendor / Device ID: Analog Devices AD1988B */ - 0x104381f6, /* Subsystem ID (0x1043 == ASUS) */ - 0x0000000d, /* Number of "pin complex" entries in the table */ - - /* NID 0x01, FUNCTION, Designates this device as an audio codec */ - /* Set the Implementation ID (IID), here: 0x104381f6. */ - AZALIA_SUBVENDOR(0x0, 0x104381f6), - - /* "Pin complex" HDA widgets. Comments: Node ID, Name, Description. */ - - /* NID 0x11, Port A, Front panel headphone jack */ - AZALIA_PIN_CFG(0x0, 0x11, 0x02214130), - - /* NID 0x12, Port D, Rear panel front speaker jack */ - AZALIA_PIN_CFG(0x0, 0x12, 0x01014010), - - /* NID 0x13, MONO_OUT, Monaural output pin */ - AZALIA_PIN_CFG(0x0, 0x13, 0x511711f0), - - /* NID 0x14, Port B, Front panel microphone jack */ - AZALIA_PIN_CFG(0x0, 0x14, 0x02a19122), - - /* NID 0x15, Port C, Rear panel line-in jack */ - AZALIA_PIN_CFG(0x0, 0x15, 0x01813021), - - /* NID 0x16, Port F, Rear panel surround-back (5.1) jack */ - AZALIA_PIN_CFG(0x0, 0x16, 0x01011012), - - /* NID 0x17, Port E, Rear panel microphone jack */ - AZALIA_PIN_CFG(0x0, 0x17, 0x01a19020), - - /* NID 0x18, CD IN, Analog CD input */ - AZALIA_PIN_CFG(0x0, 0x18, 0x9933112e), - - /* NID 0x1a, Analog PCBEEP, External analog PCBEEP signal input */ - AZALIA_PIN_CFG(0x0, 0x1a, 0x99f301f0), - - /* NID 0x1b, S/PDIF Out, S/PDIF output pin */ - AZALIA_PIN_CFG(0x0, 0x1b, 0x0145f1f0), - - /* NID 0x1c, S/PDIF In, S/PDIF input pin */ - AZALIA_PIN_CFG(0x0, 0x1c, 0x41c5f1f0), - - /* NID 0x24, Port G, Rear panel C/LFE jack */ - AZALIA_PIN_CFG(0x0, 0x24, 0x01016011), - - /* NID 0x25, Port H, Rear panel surround-side (7.1) jack */ - AZALIA_PIN_CFG(0x0, 0x25, 0x01012014), -}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/asus/m2n-e/mainboard.c b/src/mainboard/asus/m2n-e/mainboard.c deleted file mode 100644 index 2c18100..0000000 --- a/src/mainboard/asus/m2n-e/mainboard.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> - - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asus/m2n-e/mptable.c b/src/mainboard/asus/m2n-e/mptable.c deleted file mode 100644 index 333ec49..0000000 --- a/src/mainboard/asus/m2n-e/mptable.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, \ - MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, \ - bus_mcp55[bus], (((dev) << 2) | (fn)), apicid_mcp55, (pin)) - -extern unsigned char bus_mcp55[8]; -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned int sbdn; - int i, j, bus_isa; - device_t dev; - struct resource *res; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); - - pci_write_config32(dev, 0x7c, 0x00000000); - pci_write_config32(dev, 0x80, 0x11002009); - pci_write_config32(dev, 0x84, 0x2000dd08); - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /* I/O Ints */ - PCI_INT(0, sbdn + 1, 1, 10); /* SMBus */ - PCI_INT(0, sbdn + 2, 0, 20); /* USB 1.1 */ - PCI_INT(0, sbdn + 2, 1, 22); /* USB 2.0 */ - PCI_INT(0, sbdn + 4, 0, 14); /* IDE */ - PCI_INT(0, sbdn + 5, 0, 23); /* SATA 0 */ - PCI_INT(0, sbdn + 5, 1, 23); /* SATA 1 */ - PCI_INT(0, sbdn + 5, 2, 22); /* SATA 2 */ - PCI_INT(0, sbdn + 6, 1, 21); /* HD audio */ - PCI_INT(0, sbdn + 8, 0, 24); /* NIC */ - - /* PCI-E slots (two x1, one x4, one x16) */ - for (j = 7; j >= 2; j--) { - if (!bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - PCI_INT(j, 0, i, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); - } - - /* PCI slots (three on this board) */ - for (j = 0; j < 3; j++) { - for (i = 0; i < 4; i++) - PCI_INT(1, 0x06 + j, i, 0x10 + (2 + i + j) % 4); - } - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m2n-e/resourcemap.c b/src/mainboard/asus/m2n-e/resourcemap.c deleted file mode 100644 index 304980b..0000000 --- a/src/mainboard/asus/m2n-e/resourcemap.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/m2n-e/romstage.c b/src/mainboard/asus/m2n-e/romstage.c deleted file mode 100644 index d12b77c..0000000 --- a/src/mainboard/asus/m2n-e/romstage.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <lib.h> -#include <spd.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8716f/it8716f.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) - -static void memreset(int controllers, const struct mem_controller *ctrl) {} -static inline void activate_spd_rom(const struct mem_controller *ctrl) {} - -static inline int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - u8 byte; - u32 dword; - device_t dev = PCI_DEV(0, MCP55_DEVN_BASE + 1, 0); /* LPC */ - - /* Subject decoding */ - byte = pci_read_config8(dev, 0x7b); - byte |= (1 << 5); - pci_write_config8(dev, 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(dev, 0xa0); - dword |= (1 << 0); /* COM1 */ - pci_write_config32(dev, 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { - DIMM0, DIMM2, 0, 0, /* Channel A (DIMM_A1, DIMM_A2) */ - DIMM1, DIMM3, 0, 0, /* Channel B (DIMM_B1, DIMM_B2) */ - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - setup_mb_resource_map(); - report_bist_failure(bist); - console_init(); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo, sysinfo + 1); - printk(BIOS_DEBUG, "bsp_apicid=0x%02x\n", bsp_apicid); - - /* In BSP so could hold all AP until sysinfo is in RAM. */ - set_sysinfo_in_ram(0); - - setup_coherent_ht_domain(); /* Routing table and start other core0. */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* - * It is said that we should start core1 after all core0 launched - * becase optimize_link_coherent_ht is moved out from - * setup_coherent_ht_domain, so here need to make sure last core0 is - * started, esp for two way system (there may be APIC ID conflicts in - * that case). - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* Set up chains and store link pair for optimization later. */ - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - /* TODO: FIDVID */ - - init_timer(); /* Need to use TMICT to synconize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* - * FIDVID change will issue one LDTSTOP and the HT change will be - * effective too. - */ - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - /* BSP switch stack to RAM and copy sysinfo RAM now. */ - post_cache_as_ram(); -} diff --git a/src/mainboard/asus/m2n_e/Kconfig b/src/mainboard/asus/m2n_e/Kconfig new file mode 100644 index 0000000..46ac25b --- /dev/null +++ b/src/mainboard/asus/m2n_e/Kconfig @@ -0,0 +1,88 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_ASUS_M2N_E + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_ITE_IT8716F + select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_512 + select K8_ALLOCATE_IO_RANGE + +config MAINBOARD_DIR + string + default asus/m2n_e + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "M2N-E" + +config PCI_64BIT_PREF_MEM + bool + default n + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +endif # BOARD_ASUS_M2N_E diff --git a/src/mainboard/asus/m2n_e/Makefile.inc b/src/mainboard/asus/m2n_e/Makefile.inc new file mode 100644 index 0000000..b8477db --- /dev/null +++ b/src/mainboard/asus/m2n_e/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/asus/m2n_e/board_info.txt b/src/mainboard/asus/m2n_e/board_info.txt new file mode 100644 index 0000000..44a2b8c --- /dev/null +++ b/src/mainboard/asus/m2n_e/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2NE/ +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m2n_e/cmos.layout b/src/mainboard/asus/m2n_e/cmos.layout new file mode 100644 index 0000000..fedb8c8 --- /dev/null +++ b/src/mainboard/asus/m2n_e/cmos.layout @@ -0,0 +1,116 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m2n_e/devicetree.cb b/src/mainboard/asus/m2n_e/devicetree.cb new file mode 100644 index 0000000..bbe2124 --- /dev/null +++ b/src/mainboard/asus/m2n_e/devicetree.cb @@ -0,0 +1,121 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_AM2 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0x8239 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 (N/A) + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + io 0x62 = 0x000 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x000 + irq 0x70 = 0 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard IRQ + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 # PS/2 mouse IRQ + end + device pnp 2e.7 off # GPIO + io 0x60 = 0x0000 # SMI# Normal Run Access + io 0x62 = 0x800 # Simple I/O + io 0x64 = 0x0000 # Serial Flash I/F + end + device pnp 2e.8 off # MIDI (N/A) + end + device pnp 2e.9 off # Game port (N/A) + end + device pnp 2e.a off # Consumer IR (N/A) + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # Azalia (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A) + device pci a.0 on end # PCI E 5 (PCIEX4) + device pci b.0 off end # PCI E 4 + device pci c.0 on end # PCI E 3 (PCIEX1_2) + device pci d.0 on end # PCI E 2 (PCIEX1_1) + device pci e.0 off end # PCI E 1 + device pci f.0 on end # PCI E 0 (PCIEX16_1) + register "ide0_enable" = "1" # Primary IDE + register "ide1_enable" = "0" # Secondary IDE (N/A) + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/m2n_e/fanctl.c b/src/mainboard/asus/m2n_e/fanctl.c new file mode 100644 index 0000000..bcee1d3 --- /dev/null +++ b/src/mainboard/asus/m2n_e/fanctl.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * The ASUS M2N-E has 6 different fans, connected to two different chips: + * - ITE IT8716F: fan1 = CPU_FAN, fan2 = CHA_FAN1, fan3 = PWR_FAN1 + * - Analog Devices ADT7475: fan1 = CHA_FAN4, fan2 = CHA_FAN2, fan3 = CHA_FAN3 + */ + +#include <arch/io.h> +#include <stdlib.h> +#include <superio/ite/it8716f/it8716f.h> + +static void write_index(u16 port, u8 reg, u8 value) +{ + outb(reg, port); + outb(value, port + 1); +} + +static const struct { + u8 index; + u8 value; +} sequence[] = { + /* Enable startup of monitoring operations. */ + { 0x00, 0x11}, + /* Polarity active-high, PWM frequency 23.43KHz, activate fans 1-3. */ + { 0x14, 0xd7}, + /* Set the correct sensor types. TMPIN1: diode, TMPIN2/3: resistor. */ + { 0x51, 0x31}, + /* Fan1 (CPU_FAN) is software-controlled. */ + { 0x15, 0x7f}, + /* Fan2 (CHA_FAN1) is software-controlled. */ + { 0x16, 0x7f}, + /* Fan3 (PWR_FAN1) is software-controlled. */ + { 0x17, 0x7f}, + /* Enable fan1/2/3, select "on/off mode" for all of them. */ + { 0x13, 0x70}, +}; + +/* Called from src/ite/it8716f/superio.c. */ +void init_ec(u16 base) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sequence); i++) + write_index(base, sequence[i].index, sequence[i].value); +} diff --git a/src/mainboard/asus/m2n_e/get_bus_conf.c b/src/mainboard/asus/m2n_e/get_bus_conf.c new file mode 100644 index 0000000..fd7d304 --- /dev/null +++ b/src/mainboard/asus/m2n_e/get_bus_conf.c @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ +// busnum is default. +unsigned char bus_mcp55[8]; // 1 +unsigned apicid_mcp55; + +unsigned pci1234x[] = { + /* Here you only need to set value in pci1234 for HT-IO that could + * be installed or not. You may need to preset pci1234 for HTIO board, + * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. + */ + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { + /* HT Chain device num, actually it is unit id base of every ht + * device in chain, assume every chain only have 4 ht device at most. + */ + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned int apicid_base, sbdn; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* Do it only once. */ + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ + sbdn = sysconf.sbdn; + + for (i = 0; i < 8; i++) + bus_mcp55[i] = 0; + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, " + "using defaults\n", sbdn + 0x06); + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; +} diff --git a/src/mainboard/asus/m2n_e/hda_verb.c b/src/mainboard/asus/m2n_e/hda_verb.c new file mode 100644 index 0000000..2f8fe87 --- /dev/null +++ b/src/mainboard/asus/m2n_e/hda_verb.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * HDA codec soldered onto the ASUS M2N-E: + * Analog Devices AD1988B (High Definition Audio SoundMAX Codec), rev. 0x100200 + * http://www.analog.com/static/imported-files/data_sheets/AD1988A_1988B.pdf + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x11d4198b, /* Codec Vendor / Device ID: Analog Devices AD1988B */ + 0x104381f6, /* Subsystem ID (0x1043 == ASUS) */ + 0x0000000d, /* Number of "pin complex" entries in the table */ + + /* NID 0x01, FUNCTION, Designates this device as an audio codec */ + /* Set the Implementation ID (IID), here: 0x104381f6. */ + AZALIA_SUBVENDOR(0x0, 0x104381f6), + + /* "Pin complex" HDA widgets. Comments: Node ID, Name, Description. */ + + /* NID 0x11, Port A, Front panel headphone jack */ + AZALIA_PIN_CFG(0x0, 0x11, 0x02214130), + + /* NID 0x12, Port D, Rear panel front speaker jack */ + AZALIA_PIN_CFG(0x0, 0x12, 0x01014010), + + /* NID 0x13, MONO_OUT, Monaural output pin */ + AZALIA_PIN_CFG(0x0, 0x13, 0x511711f0), + + /* NID 0x14, Port B, Front panel microphone jack */ + AZALIA_PIN_CFG(0x0, 0x14, 0x02a19122), + + /* NID 0x15, Port C, Rear panel line-in jack */ + AZALIA_PIN_CFG(0x0, 0x15, 0x01813021), + + /* NID 0x16, Port F, Rear panel surround-back (5.1) jack */ + AZALIA_PIN_CFG(0x0, 0x16, 0x01011012), + + /* NID 0x17, Port E, Rear panel microphone jack */ + AZALIA_PIN_CFG(0x0, 0x17, 0x01a19020), + + /* NID 0x18, CD IN, Analog CD input */ + AZALIA_PIN_CFG(0x0, 0x18, 0x9933112e), + + /* NID 0x1a, Analog PCBEEP, External analog PCBEEP signal input */ + AZALIA_PIN_CFG(0x0, 0x1a, 0x99f301f0), + + /* NID 0x1b, S/PDIF Out, S/PDIF output pin */ + AZALIA_PIN_CFG(0x0, 0x1b, 0x0145f1f0), + + /* NID 0x1c, S/PDIF In, S/PDIF input pin */ + AZALIA_PIN_CFG(0x0, 0x1c, 0x41c5f1f0), + + /* NID 0x24, Port G, Rear panel C/LFE jack */ + AZALIA_PIN_CFG(0x0, 0x24, 0x01016011), + + /* NID 0x25, Port H, Rear panel surround-side (7.1) jack */ + AZALIA_PIN_CFG(0x0, 0x25, 0x01012014), +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/asus/m2n_e/mainboard.c b/src/mainboard/asus/m2n_e/mainboard.c new file mode 100644 index 0000000..2c18100 --- /dev/null +++ b/src/mainboard/asus/m2n_e/mainboard.c @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/m2n_e/mptable.c b/src/mainboard/asus/m2n_e/mptable.c new file mode 100644 index 0000000..333ec49 --- /dev/null +++ b/src/mainboard/asus/m2n_e/mptable.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, \ + MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, \ + bus_mcp55[bus], (((dev) << 2) | (fn)), apicid_mcp55, (pin)) + +extern unsigned char bus_mcp55[8]; +extern unsigned apicid_mcp55; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned int sbdn; + int i, j, bus_isa; + device_t dev; + struct resource *res; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + + pci_write_config32(dev, 0x7c, 0x00000000); + pci_write_config32(dev, 0x80, 0x11002009); + pci_write_config32(dev, 0x84, 0x2000dd08); + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); + + /* I/O Ints */ + PCI_INT(0, sbdn + 1, 1, 10); /* SMBus */ + PCI_INT(0, sbdn + 2, 0, 20); /* USB 1.1 */ + PCI_INT(0, sbdn + 2, 1, 22); /* USB 2.0 */ + PCI_INT(0, sbdn + 4, 0, 14); /* IDE */ + PCI_INT(0, sbdn + 5, 0, 23); /* SATA 0 */ + PCI_INT(0, sbdn + 5, 1, 23); /* SATA 1 */ + PCI_INT(0, sbdn + 5, 2, 22); /* SATA 2 */ + PCI_INT(0, sbdn + 6, 1, 21); /* HD audio */ + PCI_INT(0, sbdn + 8, 0, 24); /* NIC */ + + /* PCI-E slots (two x1, one x4, one x16) */ + for (j = 7; j >= 2; j--) { + if (!bus_mcp55[j]) + continue; + for (i = 0; i < 4; i++) + PCI_INT(j, 0, i, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); + } + + /* PCI slots (three on this board) */ + for (j = 0; j < 3; j++) { + for (i = 0; i < 4; i++) + PCI_INT(1, 0x06 + j, i, 0x10 + (2 + i + j) % 4); + } + + /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/m2n_e/resourcemap.c b/src/mainboard/asus/m2n_e/resourcemap.c new file mode 100644 index 0000000..304980b --- /dev/null +++ b/src/mainboard/asus/m2n_e/resourcemap.c @@ -0,0 +1,281 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/asus/m2n_e/romstage.c b/src/mainboard/asus/m2n_e/romstage.c new file mode 100644 index 0000000..d12b77c --- /dev/null +++ b/src/mainboard/asus/m2n_e/romstage.c @@ -0,0 +1,165 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2010 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <lib.h> +#include <spd.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8716f/it8716f.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) +#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) {} +static inline void activate_spd_rom(const struct mem_controller *ctrl) {} + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + u8 byte; + u32 dword; + device_t dev = PCI_DEV(0, MCP55_DEVN_BASE + 1, 0); /* LPC */ + + /* Subject decoding */ + byte = pci_read_config8(dev, 0x7b); + byte |= (1 << 5); + pci_write_config8(dev, 0x7b, byte); + + /* LPC Positive Decode 0 */ + dword = pci_read_config32(dev, 0xa0); + dword |= (1 << 0); /* COM1 */ + pci_write_config32(dev, 0xa0, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { + DIMM0, DIMM2, 0, 0, /* Channel A (DIMM_A1, DIMM_A2) */ + DIMM1, DIMM3, 0, 0, /* Channel B (DIMM_B1, DIMM_B2) */ + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + setup_mb_resource_map(); + report_bist_failure(bist); + console_init(); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo, sysinfo + 1); + printk(BIOS_DEBUG, "bsp_apicid=0x%02x\n", bsp_apicid); + + /* In BSP so could hold all AP until sysinfo is in RAM. */ + set_sysinfo_in_ram(0); + + setup_coherent_ht_domain(); /* Routing table and start other core0. */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* + * It is said that we should start core1 after all core0 launched + * becase optimize_link_coherent_ht is moved out from + * setup_coherent_ht_domain, so here need to make sure last core0 is + * started, esp for two way system (there may be APIC ID conflicts in + * that case). + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* Set up chains and store link pair for optimization later. */ + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + /* TODO: FIDVID */ + + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + /* + * FIDVID change will issue one LDTSTOP and the HT change will be + * effective too. + */ + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); + + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + /* BSP switch stack to RAM and copy sysinfo RAM now. */ + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/m2v-mx_se/Kconfig b/src/mainboard/asus/m2v-mx_se/Kconfig deleted file mode 100644 index 2c1331f..0000000 --- a/src/mainboard/asus/m2v-mx_se/Kconfig +++ /dev/null @@ -1,82 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Cristi Măgherușan cristi.magherusan@net.utcluj.ro -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_M2V_MX_SE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_VIA_VT8237R - select SOUTHBRIDGE_VIA_K8T890 - select SOUTHBRIDGE_VIA_SUBTYPE_K8M890 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select VGA - select HAVE_ACPI_RESUME - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/m2v-mx_se - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x4000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "M2V-MX SE" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HEAP_SIZE - hex - default 0x40000 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -endif # BOARD_ASUS_M2V_MX_SE diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c deleted file mode 100644 index 3beac4b..0000000 --- a/src/mainboard/asus/m2v-mx_se/acpi_tables.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" -#include "southbridge/via/k8t890/k8t890.h" -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <cpu/amd/amdk8_sysconf.h> - -void get_bus_conf(void) -{ - /* FIXME: implement this. */ -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, 0); - - /* Write NB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/asus/m2v-mx_se/board_info.txt b/src/mainboard/asus/m2v-mx_se/board_info.txt deleted file mode 100644 index 739c351..0000000 --- a/src/mainboard/asus/m2v-mx_se/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2VMX_SE/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m2v-mx_se/cmos.layout b/src/mainboard/asus/m2v-mx_se/cmos.layout deleted file mode 100644 index 3114791..0000000 --- a/src/mainboard/asus/m2v-mx_se/cmos.layout +++ /dev/null @@ -1,104 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -448 3 e 10 videoram_size -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% -# videoram_size: mimics the bits in the ramcontroller. -10 1 8MB -10 2 16MB -10 3 32MB -10 4 64MB -10 5 128MB -10 6 256MB - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m2v-mx_se/devicetree.cb b/src/mainboard/asus/m2v-mx_se/devicetree.cb deleted file mode 100644 index 213e3ea..0000000 --- a/src/mainboard/asus/m2v-mx_se/devicetree.cb +++ /dev/null @@ -1,77 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # APIC cluster - chip cpu/amd/socket_AM2 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0 inherit - chip northbridge/amd/amdk8 # mc0 - device pci 18.0 on # Northbridge - # Devices on link 0, link 0 == LDT 0 - chip southbridge/via/vt8237r # Southbridge - register "ide0_enable" = "1" # Enable IDE channel 0 - register "ide1_enable" = "1" # Enable IDE channel 1 - register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 - register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 - register "fn_ctrl_lo" = "0xc0" # Enable SB functions - register "fn_ctrl_hi" = "0x1d" # Enable SB functions - device pci 0.0 on end # HT - device pci f.1 on end # IDE - device pci 11.0 on # LPC - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Environment controller - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 0x00 - end - device pnp 2e.5 off end # PS/2 keyboard - device pnp 2e.6 off end # PS/2 mouse - device pnp 2e.7 off end # GPIO config - device pnp 2e.8 off end # Midi port - device pnp 2e.9 off end # Game port - device pnp 2e.a off end # IR - end - end - device pci 12.0 on end # VIA LAN - device pci 13.0 on end # br - device pci 13.1 on end # br2 need to have it here to discover it - end - chip southbridge/via/k8t890 # "Southbridge" K8M890 - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/asus/m2v-mx_se/dsdt.asl b/src/mainboard/asus/m2v-mx_se/dsdt.asl deleted file mode 100644 index c555058..0000000 --- a/src/mainboard/asus/m2v-mx_se/dsdt.asl +++ /dev/null @@ -1,253 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S3, Package () { 0x01, 0x01, 0x00, 0x00 }) - Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) - - - /* blink a LED when entering the sleep (any type) */ - Method (_PTS, 1, NotSerialized) - { - Store (0x1, _SB.PCI0.ISA.LEDR) - } - - /* cancel a LED blinking when waking from sleep (any type) */ - Method (_WAK, 1, NotSerialized) - { - Store (0x0, _SB.PCI0.ISA.LEDR) - /* wake OK */ - Return(Package(0x02){0x00, 0x00}) - } - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x15 }, /* 0xf SATA IRQ 21 */ - Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ - Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x14 }, /* USB routing */ - Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, - Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x17 }, - Package (0x04) { 0x0012FFFF, 0x00, 0x00, 0x17 }, /* LAN */ - Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, /* PCIe bridge SB */ - Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x16 }, /* PCIe bridge SB */ - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP pridge */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, /* FIXME FIXME */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ - }) - - Device (PEGG) - { - Name (_ADR, 0x00020000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, - }) - } - - Device (PEX0) - { - Name (_ADR, 0x00030000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, - }) - } - - Device (PEX1) - { - Name (_ADR, 0x00130000) - Name (_UID, 0x00) - Name (_BBN, 0x4) - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* PCIE audio */ - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (TBRG) - { - Name (_ADR, 0x00130001) - Name (_UID, 0x00) - Name (_BBN, 0x5) - Name (_PRT, Package () { - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, /* PCI slot */ - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, /* PCI slot */ - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 }, - }) - } - Device (ISA) { - Name (_ADR, 0x00110000) - OperationRegion (PCIC, PCI_Config, 0x0, 0xff) - Field (PCIC, ByteAcc, NoLock, Preserve) - { - Offset (0x94), - /* two LSB bits are blink rate */ - LEDR, 2, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - } - /* Dummy device to hold auto generated reserved resources */ - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - } - } -} diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c deleted file mode 100644 index adcdfc7..0000000 --- a/src/mainboard/asus/m2v-mx_se/romstage.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) - * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/amd/mtrr.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "southbridge/via/vt8237r/early_smbus.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/via/k8t890/early_car.c" -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -#define SB_VFSMAF 0 - -static void ldtstop_sb(void) -{ - print_debug("toggle LDTSTP#\n"); - - /* fix errata #181, disable DRAM controller it will get enabled later */ - u8 tmp = pci_read_config8(PCI_DEV(0, 0x18, 2), 0x94); - tmp |= (( 1 << 14) | (1 << 3)); - pci_write_config8(PCI_DEV(0, 0x18, 2), 0x94, tmp); - - u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); - reg = reg ^ (1 << 0); - outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); - reg = inb(VT8237R_ACPI_IO_BASE + 0x15); - print_debug("done\n"); -} - -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -void soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - print_debug("soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - while (1) { - /* daisy daisy ... */ - hlt(); - } -} - -unsigned int get_sbdn(unsigned bus) -{ - device_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - ite_enable_3vsbsw(GPIO_DEV); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting...\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... All core 0 started\n"); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - print_debug_hex8(needs_reset); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - print_debug_hex8(needs_reset); - needs_reset |= k8t890_early_setup_ht(); - print_debug_hex8(needs_reset); - - vt8237_early_network_init(NULL); - vt8237_early_spi_init(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - printk(BIOS_DEBUG, "FAILED!\n"); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - /* allow LDT STOP asserts */ - vt8237_sb_enable_fid_vid(); - - enable_fid_change(); - print_debug("after enable_fid_change\n"); - - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); -} diff --git a/src/mainboard/asus/m2v/dsdt.asl b/src/mainboard/asus/m2v/dsdt.asl index fde6ae8..ae1d44f 100644 --- a/src/mainboard/asus/m2v/dsdt.asl +++ b/src/mainboard/asus/m2v/dsdt.asl @@ -496,7 +496,7 @@ DefinitionBlock ("DSDT.aml", "DSDT", 2, "CORE ", "COREBOOT", 1) IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 6, 7, 10, 11, 12} })
- /* adapted from ma78gm/dsdt.asl */ + /* adapted from ga_ma78gm_us2h/dsdt.asl */ #define PCI_INTX_DEV(intx, pinx, uid) \ Device(intx) { \ Name(_HID, EISAID("PNP0C0F")) \ diff --git a/src/mainboard/asus/m2v_mx_se/Kconfig b/src/mainboard/asus/m2v_mx_se/Kconfig new file mode 100644 index 0000000..3cbfffb --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/Kconfig @@ -0,0 +1,82 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Cristi Măgherușan cristi.magherusan@net.utcluj.ro +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_M2V_MX_SE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_VIA_VT8237R + select SOUTHBRIDGE_VIA_K8T890 + select SOUTHBRIDGE_VIA_SUBTYPE_K8M890 + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select VGA + select HAVE_ACPI_RESUME + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default asus/m2v_mx_se + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x4000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MAINBOARD_PART_NUMBER + string + default "M2V-MX SE" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HEAP_SIZE + hex + default 0x40000 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +endif # BOARD_ASUS_M2V_MX_SE diff --git a/src/mainboard/asus/m2v_mx_se/acpi_tables.c b/src/mainboard/asus/m2v_mx_se/acpi_tables.c new file mode 100644 index 0000000..3beac4b --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/acpi_tables.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" +#include "northbridge/amd/amdk8/acpi.h" +#include <cpu/amd/powernow.h> +#include <cpu/amd/amdk8_sysconf.h> + +void get_bus_conf(void) +{ + /* FIXME: implement this. */ +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/asus/m2v_mx_se/board_info.txt b/src/mainboard/asus/m2v_mx_se/board_info.txt new file mode 100644 index 0000000..739c351 --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM2/M2VMX_SE/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m2v_mx_se/cmos.layout b/src/mainboard/asus/m2v_mx_se/cmos.layout new file mode 100644 index 0000000..3114791 --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/cmos.layout @@ -0,0 +1,104 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +448 3 e 10 videoram_size +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% +# videoram_size: mimics the bits in the ramcontroller. +10 1 8MB +10 2 16MB +10 3 32MB +10 4 64MB +10 5 128MB +10 6 256MB + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m2v_mx_se/devicetree.cb b/src/mainboard/asus/m2v_mx_se/devicetree.cb new file mode 100644 index 0000000..213e3ea --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/devicetree.cb @@ -0,0 +1,77 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + subsystemid 0x1043 0 inherit + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x1d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 on end # VIA LAN + device pci 13.0 on end # br + device pci 13.1 on end # br2 need to have it here to discover it + end + chip southbridge/via/k8t890 # "Southbridge" K8M890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/asus/m2v_mx_se/dsdt.asl b/src/mainboard/asus/m2v_mx_se/dsdt.asl new file mode 100644 index 0000000..c555058 --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/dsdt.asl @@ -0,0 +1,253 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S3, Package () { 0x01, 0x01, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + + /* blink a LED when entering the sleep (any type) */ + Method (_PTS, 1, NotSerialized) + { + Store (0x1, _SB.PCI0.ISA.LEDR) + } + + /* cancel a LED blinking when waking from sleep (any type) */ + Method (_WAK, 1, NotSerialized) + { + Store (0x0, _SB.PCI0.ISA.LEDR) + /* wake OK */ + Return(Package(0x02){0x00, 0x00}) + } + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x15 }, /* 0xf SATA IRQ 21 */ + Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x14 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x16 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x17 }, + Package (0x04) { 0x0012FFFF, 0x00, 0x00, 0x17 }, /* LAN */ + Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, /* PCIe bridge SB */ + Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x16 }, /* PCIe bridge SB */ + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP pridge */ + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, /* FIXME FIXME */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ + }) + + Device (PEGG) + { + Name (_ADR, 0x00020000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, + }) + } + + Device (PEX0) + { + Name (_ADR, 0x00030000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, + }) + } + + Device (PEX1) + { + Name (_ADR, 0x00130000) + Name (_UID, 0x00) + Name (_BBN, 0x4) + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* PCIE audio */ + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (TBRG) + { + Name (_ADR, 0x00130001) + Name (_UID, 0x00) + Name (_BBN, 0x5) + Name (_PRT, Package () { + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, /* PCI slot */ + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, /* PCI slot */ + Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 }, + }) + } + Device (ISA) { + Name (_ADR, 0x00110000) + OperationRegion (PCIC, PCI_Config, 0x0, 0xff) + Field (PCIC, ByteAcc, NoLock, Preserve) + { + Offset (0x94), + /* two LSB bits are blink rate */ + LEDR, 2, + } + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + /* Dummy device to hold auto generated reserved resources */ + Device(MBRS) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + External(_CRS) /* Resource Template in SSDT */ + } + } + } +} diff --git a/src/mainboard/asus/m2v_mx_se/romstage.c b/src/mainboard/asus/m2v_mx_se/romstage.c new file mode 100644 index 0000000..adcdfc7 --- /dev/null +++ b/src/mainboard/asus/m2v_mx_se/romstage.c @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/amd/mtrr.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "southbridge/via/vt8237r/early_smbus.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "southbridge/via/k8t890/early_car.c" +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +#define SB_VFSMAF 0 + +static void ldtstop_sb(void) +{ + print_debug("toggle LDTSTP#\n"); + + /* fix errata #181, disable DRAM controller it will get enabled later */ + u8 tmp = pci_read_config8(PCI_DEV(0, 0x18, 2), 0x94); + tmp |= (( 1 << 14) | (1 << 3)); + pci_write_config8(PCI_DEV(0, 0x18, 2), 0x94, tmp); + + u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); + reg = reg ^ (1 << 0); + outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); + reg = inb(VT8237R_ACPI_IO_BASE + 0x15); + print_debug("done\n"); +} + +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset\n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = &sysinfo_car; + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + ite_enable_3vsbsw(GPIO_DEV); + console_init(); + enable_rom_decode(); + + printk(BIOS_INFO, "now booting...\n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + printk(BIOS_INFO, "now booting... All core 0 started\n"); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + print_debug_hex8(needs_reset); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + print_debug_hex8(needs_reset); + needs_reset |= k8t890_early_setup_ht(); + print_debug_hex8(needs_reset); + + vt8237_early_network_init(NULL); + vt8237_early_spi_init(); + + if (needs_reset) { + printk(BIOS_DEBUG, "ht reset -\n"); + soft_reset(); + printk(BIOS_DEBUG, "FAILED!\n"); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + /* allow LDT STOP asserts */ + vt8237_sb_enable_fid_vid(); + + enable_fid_change(); + print_debug("after enable_fid_change\n"); + + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} diff --git a/src/mainboard/asus/m4a78-em/Kconfig b/src/mainboard/asus/m4a78-em/Kconfig deleted file mode 100644 index d100806..0000000 --- a/src/mainboard/asus/m4a78-em/Kconfig +++ /dev/null @@ -1,75 +0,0 @@ -if BOARD_ASUS_M4A78_EM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default asus/m4a78-em - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "M4A78-EM" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 18 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif diff --git a/src/mainboard/asus/m4a78-em/acpi/cpstate.asl b/src/mainboard/asus/m4a78-em/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/asus/m4a78-em/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/asus/m4a78-em/acpi/ide.asl b/src/mainboard/asus/m4a78-em/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/asus/m4a78-em/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/asus/m4a78-em/acpi/routing.asl b/src/mainboard/asus/m4a78-em/acpi/routing.asl deleted file mode 100644 index 7b54b24..0000000 --- a/src/mainboard/asus/m4a78-em/acpi/routing.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTA, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0014FFFF, 0, 0, 16 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/asus/m4a78-em/acpi/sata.asl b/src/mainboard/asus/m4a78-em/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/asus/m4a78-em/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/asus/m4a78-em/acpi/usb.asl b/src/mainboard/asus/m4a78-em/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/asus/m4a78-em/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/asus/m4a78-em/acpi_tables.c b/src/mainboard/asus/m4a78-em/acpi_tables.c deleted file mode 100644 index 7e159b4..0000000 --- a/src/mainboard/asus/m4a78-em/acpi_tables.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/asus/m4a78-em/board_info.txt b/src/mainboard/asus/m4a78-em/board_info.txt deleted file mode 100644 index be683dd..0000000 --- a/src/mainboard/asus/m4a78-em/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m4a78-em/cmos.layout b/src/mainboard/asus/m4a78-em/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/asus/m4a78-em/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m4a78-em/devicetree.cb b/src/mainboard/asus/m4a78-em/devicetree.cb deleted file mode 100644 index e760c17..0000000 --- a/src/mainboard/asus/m4a78-em/devicetree.cb +++ /dev/null @@ -1,106 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1043 0x83f1 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # bridge to RTL8112 PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "2" - - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - end - device pnp 2e.9 off # GAME - end - device pnp 2e.a off end # CIR - end #superio - end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end # chip northbridge - end #domain -end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a78-em/dsdt.asl b/src/mainboard/asus/m4a78-em/dsdt.asl deleted file mode 100644 index ab58dd0..0000000 --- a/src/mainboard/asus/m4a78-em/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/asus/m4a78-em/get_bus_conf.c b/src/mainboard/asus/m4a78-em/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/asus/m4a78-em/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/asus/m4a78-em/irq_tables.c b/src/mainboard/asus/m4a78-em/irq_tables.c deleted file mode 100644 index 41d5880..0000000 --- a/src/mainboard/asus/m4a78-em/irq_tables.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Juhana Helovuo juhe@iki.fi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x14 << 3) | 0x3, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1002, /* Vendor */ - 0x439d, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xca, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x01, (0x05 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x02 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x03 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x04 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x05 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x06 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x07 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x02, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0xa, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x0c << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x12 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x13 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x11 << 3) | 0x0, {{0x0c, 0xdc90}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x03, (0x06 << 3) | 0x0, {{0x0a, 0xdc90}, {0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}}, 0xd, 0x0}, - {0x03, (0x07 << 3) | 0x0, {{0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}, {0x0a, 0xdc90}}, 0xe, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/m4a78-em/mainboard.c b/src/mainboard/asus/m4a78-em/mainboard.c deleted file mode 100644 index 1a2e9fc..0000000 --- a/src/mainboard/asus/m4a78-em/mainboard.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); - -void set_pcie_dereset() -{ - u8 byte; - u16 word; - device_t sm_dev; - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 1 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte |= ((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 1 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word |= (1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -void set_pcie_reset() -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 0 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte &= ~((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 0 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word &= ~(1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -/* - * justify the dev3 is exist or not - * NOTE: This just copied from AMD Tilapia code. - * It is completly unknown if it will work at all for this board. - */ -u8 is_dev3_present(void) -{ - u16 word; - device_t sm_dev; - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* put the GPIO68 output to tristate */ - word = pci_read_config16(sm_dev, 0x7e); - word |= 1 << 6; - pci_write_config16(sm_dev, 0x7e,word); - - /* read the GPIO68 input status */ - word = pci_read_config16(sm_dev, 0x7e); - - if(word & (1 << 10)){ - /*not exist*/ - return 0; - }else{ - /*exist*/ - return 1; - } -} - - -/************************************************* -* enable the dedicated function in this board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ - /* set_thermal_config(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asus/m4a78-em/mb_sysconf.h b/src/mainboard/asus/m4a78-em/mb_sysconf.h deleted file mode 100644 index 25d63d5..0000000 --- a/src/mainboard/asus/m4a78-em/mb_sysconf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/asus/m4a78-em/mptable.c b/src/mainboard/asus/m4a78-em/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/asus/m4a78-em/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m4a78-em/resourcemap.c b/src/mainboard/asus/m4a78-em/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/asus/m4a78-em/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/m4a78-em/romstage.c b/src/mainboard/asus/m4a78-em/romstage.c deleted file mode 100644 index 0a03d59..0000000 --- a/src/mainboard/asus/m4a78-em/romstage.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - - #if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); - #endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - #if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - #endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/asus/m4a785-m/Kconfig b/src/mainboard/asus/m4a785-m/Kconfig deleted file mode 100644 index e0e76fe..0000000 --- a/src/mainboard/asus/m4a785-m/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_ASUS_M4A785M - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default asus/m4a785-m - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "M4A785-M" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 19 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif diff --git a/src/mainboard/asus/m4a785-m/acpi/cpstate.asl b/src/mainboard/asus/m4a785-m/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/asus/m4a785-m/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/asus/m4a785-m/acpi/ide.asl b/src/mainboard/asus/m4a785-m/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/asus/m4a785-m/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/asus/m4a785-m/acpi/routing.asl b/src/mainboard/asus/m4a785-m/acpi/routing.asl deleted file mode 100644 index 7b54b24..0000000 --- a/src/mainboard/asus/m4a785-m/acpi/routing.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTA, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0014FFFF, 0, 0, 16 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/asus/m4a785-m/acpi/sata.asl b/src/mainboard/asus/m4a785-m/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/asus/m4a785-m/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/asus/m4a785-m/acpi/usb.asl b/src/mainboard/asus/m4a785-m/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/asus/m4a785-m/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/asus/m4a785-m/acpi_tables.c b/src/mainboard/asus/m4a785-m/acpi_tables.c deleted file mode 100644 index 1c0afeb..0000000 --- a/src/mainboard/asus/m4a785-m/acpi_tables.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - - /* TODO: More HT and other tables need to go into this table generation. - * This should also be moved out to the silicon level if it can. - */ - - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot PSTATE/TOM SSDT at %lx\n", current); - ssdt = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/asus/m4a785-m/board_info.txt b/src/mainboard/asus/m4a785-m/board_info.txt deleted file mode 100644 index 3c5f145..0000000 --- a/src/mainboard/asus/m4a785-m/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM2Plus/M4A785M/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m4a785-m/cmos.layout b/src/mainboard/asus/m4a785-m/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/asus/m4a785-m/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m4a785-m/devicetree.cb b/src/mainboard/asus/m4a785-m/devicetree.cb deleted file mode 100644 index 4549ead..0000000 --- a/src/mainboard/asus/m4a785-m/devicetree.cb +++ /dev/null @@ -1,106 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1043 0x83a2 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 off end # - device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "2" - - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - end - device pnp 2e.9 off # GAME - end - device pnp 2e.a off end # CIR - end #superio - end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end # chip northbridge - end #domain -end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a785-m/dsdt.asl b/src/mainboard/asus/m4a785-m/dsdt.asl deleted file mode 100644 index ab58dd0..0000000 --- a/src/mainboard/asus/m4a785-m/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/asus/m4a785-m/get_bus_conf.c b/src/mainboard/asus/m4a785-m/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/asus/m4a785-m/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/asus/m4a785-m/irq_tables.c b/src/mainboard/asus/m4a785-m/irq_tables.c deleted file mode 100644 index 708f311..0000000 --- a/src/mainboard/asus/m4a785-m/irq_tables.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Juhana Helovuo juhe@iki.fi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x14 << 3) | 0x3, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1002, /* Vendor */ - 0x439d, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x8, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x01, (0x05 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x02 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x03 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x04 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x05 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x06 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x07 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x02, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0xa, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x0c << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x12 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x13 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x00, (0x11 << 3) | 0x0, {{0x0c, 0xdc90}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x0a, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, - {0x03, (0x05 << 3) | 0x0, {{0x0a, 0xdc90}, {0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}}, 0xc, 0x0}, - {0x03, (0x06 << 3) | 0x0, {{0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}, {0x0a, 0xdc90}}, 0xd, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c deleted file mode 100644 index b1154ab..0000000 --- a/src/mainboard/asus/m4a785-m/mainboard.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ - -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); - -void set_pcie_dereset() -{ - u8 byte; - u16 word; - device_t sm_dev; - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 1 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte |= ((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 1 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word |= (1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -void set_pcie_reset() -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 0 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte &= ~((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 0 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word &= ~(1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -/* - * justify the dev3 is exist or not - * NOTE: This just copied from AMD Tilapia code. - * It is completly unknown it it will work at all for ASUS M4A785-M. - */ -u8 is_dev3_present(void) -{ - u16 word; - device_t sm_dev; - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* put the GPIO68 output to tristate */ - word = pci_read_config16(sm_dev, 0x7e); - word |= 1 << 6; - pci_write_config16(sm_dev, 0x7e,word); - - /* read the GPIO68 input status */ - word = pci_read_config16(sm_dev, 0x7e); - - if(word & (1 << 10)){ - /*not exist*/ - return 0; - }else{ - /*exist*/ - return 1; - } -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb700 settings for thermal config */ - /* set SB700 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in this board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asus/m4a785-m/mb_sysconf.h b/src/mainboard/asus/m4a785-m/mb_sysconf.h deleted file mode 100644 index 25d63d5..0000000 --- a/src/mainboard/asus/m4a785-m/mb_sysconf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/asus/m4a785-m/mptable.c b/src/mainboard/asus/m4a785-m/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/asus/m4a785-m/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m4a785-m/resourcemap.c b/src/mainboard/asus/m4a785-m/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/asus/m4a785-m/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c deleted file mode 100644 index 84d2b97..0000000 --- a/src/mainboard/asus/m4a785-m/romstage.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - - #if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); - #endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - #if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - #endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ -#if !CONFIG_BOARD_ASUS_M4A785TM - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } -#else - static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } -#endif - - return 0; -} diff --git a/src/mainboard/asus/m4a785_m/Kconfig b/src/mainboard/asus/m4a785_m/Kconfig new file mode 100644 index 0000000..cd8f416 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/Kconfig @@ -0,0 +1,76 @@ +if BOARD_ASUS_M4A785M + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default asus/m4a785_m + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "M4A785-M" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 19 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif diff --git a/src/mainboard/asus/m4a785_m/acpi/cpstate.asl b/src/mainboard/asus/m4a785_m/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/m4a785_m/acpi/ide.asl b/src/mainboard/asus/m4a785_m/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/asus/m4a785_m/acpi/routing.asl b/src/mainboard/asus/m4a785_m/acpi/routing.asl new file mode 100644 index 0000000..7b54b24 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi/routing.asl @@ -0,0 +1,300 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTA, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0014FFFF, 0, 0, 16 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/asus/m4a785_m/acpi/sata.asl b/src/mainboard/asus/m4a785_m/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/asus/m4a785_m/acpi/usb.asl b/src/mainboard/asus/m4a785_m/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/asus/m4a785_m/acpi_tables.c b/src/mainboard/asus/m4a785_m/acpi_tables.c new file mode 100644 index 0000000..1c0afeb --- /dev/null +++ b/src/mainboard/asus/m4a785_m/acpi_tables.c @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + + /* TODO: More HT and other tables need to go into this table generation. + * This should also be moved out to the silicon level if it can. + */ + + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot PSTATE/TOM SSDT at %lx\n", current); + ssdt = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asus/m4a785_m/board_info.txt b/src/mainboard/asus/m4a785_m/board_info.txt new file mode 100644 index 0000000..3c5f145 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM2Plus/M4A785M/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m4a785_m/cmos.layout b/src/mainboard/asus/m4a785_m/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m4a785_m/devicetree.cb b/src/mainboard/asus/m4a785_m/devicetree.cb new file mode 100644 index 0000000..4549ead --- /dev/null +++ b/src/mainboard/asus/m4a785_m/devicetree.cb @@ -0,0 +1,106 @@ +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1043 0x83a2 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 off end # + device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "2" + + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8712f + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + end + device pnp 2e.9 off # GAME + end + device pnp 2e.a off end # CIR + end #superio + end #LPC + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # chip northbridge + end #domain +end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a785_m/dsdt.asl b/src/mainboard/asus/m4a785_m/dsdt.asl new file mode 100644 index 0000000..ab58dd0 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASUS ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/asus/m4a785_m/get_bus_conf.c b/src/mainboard/asus/m4a785_m/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/asus/m4a785_m/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/asus/m4a785_m/irq_tables.c b/src/mainboard/asus/m4a785_m/irq_tables.c new file mode 100644 index 0000000..708f311 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/irq_tables.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Juhana Helovuo juhe@iki.fi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x14 << 3) | 0x3, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1002, /* Vendor */ + 0x439d, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x8, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x01, (0x05 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x05 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x06 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x07 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x02, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0xa, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0c << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x0c, 0xdc90}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x0a, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x03, (0x05 << 3) | 0x0, {{0x0a, 0xdc90}, {0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}}, 0xc, 0x0}, + {0x03, (0x06 << 3) | 0x0, {{0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}, {0x0a, 0xdc90}}, 0xd, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/m4a785_m/mainboard.c b/src/mainboard/asus/m4a785_m/mainboard.c new file mode 100644 index 0000000..b1154ab --- /dev/null +++ b/src/mainboard/asus/m4a785_m/mainboard.c @@ -0,0 +1,204 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ + +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + +void set_pcie_dereset(void); +void set_pcie_reset(void); +u8 is_dev3_present(void); + +void set_pcie_dereset() +{ + u8 byte; + u16 word; + device_t sm_dev; + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 1 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte |= ((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 1 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word |= (1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +void set_pcie_reset() +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 0 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte &= ~((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 0 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word &= ~(1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +/* + * justify the dev3 is exist or not + * NOTE: This just copied from AMD Tilapia code. + * It is completly unknown it it will work at all for ASUS M4A785-M. + */ +u8 is_dev3_present(void) +{ + u16 word; + device_t sm_dev; + + /* access the smbus extended register */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* put the GPIO68 output to tristate */ + word = pci_read_config16(sm_dev, 0x7e); + word |= 1 << 6; + pci_write_config16(sm_dev, 0x7e,word); + + /* read the GPIO68 input status */ + word = pci_read_config16(sm_dev, 0x7e); + + if(word & (1 << 10)){ + /*not exist*/ + return 0; + }else{ + /*exist*/ + return 1; + } +} + +/* + * set thermal config + */ +static void set_thermal_config(void) +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb700 settings for thermal config */ + /* set SB700 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/************************************************* +* enable the dedicated function in this board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ + set_thermal_config(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/m4a785_m/mb_sysconf.h b/src/mainboard/asus/m4a785_m/mb_sysconf.h new file mode 100644 index 0000000..25d63d5 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/mb_sysconf.h @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/asus/m4a785_m/mptable.c b/src/mainboard/asus/m4a785_m/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/m4a785_m/resourcemap.c b/src/mainboard/asus/m4a785_m/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/asus/m4a785_m/romstage.c b/src/mainboard/asus/m4a785_m/romstage.c new file mode 100644 index 0000000..84d2b97 --- /dev/null +++ b/src/mainboard/asus/m4a785_m/romstage.c @@ -0,0 +1,265 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + + #if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); + #endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + + #if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + #endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ +#if !CONFIG_BOARD_ASUS_M4A785TM + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } +#else + static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } +#endif + + return 0; +} diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig deleted file mode 100644 index 71affb8..0000000 --- a/src/mainboard/asus/m4a785t-m/Kconfig +++ /dev/null @@ -1,78 +0,0 @@ -if BOARD_ASUS_M4A785TM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR3 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default asus/m4a785t-m - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "M4A785T-M" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 19 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_0100009f.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif diff --git a/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl b/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl deleted file mode 100644 index b38e59e..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000BB8, - 0x000078D9, - 0x00000004, - 0x00000004, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x000008FC, - 0x0000659A, - 0x00000004, - 0x00000004, - 0x00000001, - 0x00000001 - }, - - Package () - { - 0x00000708, - 0x000056BF, - 0x00000004, - 0x00000004, - 0x00000002, - 0x00000002 - }, - - Package () - { - 0x00000320, - 0x00001FA1, - 0x00000004, - 0x00000004, - 0x00000003, - 0x00000003 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/asus/m4a785t-m/acpi/ide.asl b/src/mainboard/asus/m4a785t-m/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/asus/m4a785t-m/acpi/routing.asl b/src/mainboard/asus/m4a785t-m/acpi/routing.asl deleted file mode 100644 index 7b54b24..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi/routing.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTA, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0014FFFF, 0, 0, 16 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/asus/m4a785t-m/acpi/sata.asl b/src/mainboard/asus/m4a785t-m/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/asus/m4a785t-m/acpi/usb.asl b/src/mainboard/asus/m4a785t-m/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/asus/m4a785t-m/acpi_tables.c b/src/mainboard/asus/m4a785t-m/acpi_tables.c deleted file mode 100644 index 3797a58..0000000 --- a/src/mainboard/asus/m4a785t-m/acpi_tables.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/acpi_tables.c" diff --git a/src/mainboard/asus/m4a785t-m/board_info.txt b/src/mainboard/asus/m4a785t-m/board_info.txt deleted file mode 100644 index 375d74f..0000000 --- a/src/mainboard/asus/m4a785t-m/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m4a785t-m/cmos.default b/src/mainboard/asus/m4a785t-m/cmos.default deleted file mode 100644 index da086de..0000000 --- a/src/mainboard/asus/m4a785t-m/cmos.default +++ /dev/null @@ -1,18 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -ECC_memory=Enable -baud_rate=115200 -hw_scrubber=Enable -interleave_chip_selects=Enable -max_mem_clock=400Mhz -multi_core=Enable -power_on_after_fail=Disable -debug_level=Spew -boot_first=HDD -boot_second=Fallback_Floppy -boot_third=Fallback_Network -boot_index=0xf -boot_countdown=0xc -slow_cpu=off -nmi=Enable -iommu=Enable diff --git a/src/mainboard/asus/m4a785t-m/cmos.layout b/src/mainboard/asus/m4a785t-m/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/asus/m4a785t-m/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m4a785t-m/devicetree.cb b/src/mainboard/asus/m4a785t-m/devicetree.cb deleted file mode 100644 index 9783989..0000000 --- a/src/mainboard/asus/m4a785t-m/devicetree.cb +++ /dev/null @@ -1,108 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1043 0x83a2 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on # Internal Graphics P2P bridge 0x9602 - device pci 5.0 on end # onboard VGA - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 off end # - device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8712f - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # Environment Controller - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - end - device pnp 2e.9 off # GAME - end - device pnp 2e.a off end # CIR - end #superio - end #LPC - device pci 14.4 on end # PCI to PCI Bridge [1002:4384] - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end # chip northbridge - end #domain -end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a785t-m/dsdt.asl b/src/mainboard/asus/m4a785t-m/dsdt.asl deleted file mode 100644 index 4a56f26..0000000 --- a/src/mainboard/asus/m4a785t-m/dsdt.asl +++ /dev/null @@ -1,1773 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA,CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/asus/m4a785t-m/get_bus_conf.c b/src/mainboard/asus/m4a785t-m/get_bus_conf.c deleted file mode 100644 index 371d4b2..0000000 --- a/src/mainboard/asus/m4a785t-m/get_bus_conf.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/get_bus_conf.c" diff --git a/src/mainboard/asus/m4a785t-m/irq_tables.c b/src/mainboard/asus/m4a785t-m/irq_tables.c deleted file mode 100644 index 3311e26..0000000 --- a/src/mainboard/asus/m4a785t-m/irq_tables.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/irq_tables.c" diff --git a/src/mainboard/asus/m4a785t-m/mainboard.c b/src/mainboard/asus/m4a785t-m/mainboard.c deleted file mode 100644 index 197ff01..0000000 --- a/src/mainboard/asus/m4a785t-m/mainboard.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/mainboard.c" diff --git a/src/mainboard/asus/m4a785t-m/mptable.c b/src/mainboard/asus/m4a785t-m/mptable.c deleted file mode 100644 index 32389ca..0000000 --- a/src/mainboard/asus/m4a785t-m/mptable.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/mptable.c" diff --git a/src/mainboard/asus/m4a785t-m/romstage.c b/src/mainboard/asus/m4a785t-m/romstage.c deleted file mode 100644 index 7c767b7..0000000 --- a/src/mainboard/asus/m4a785t-m/romstage.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../m4a785-m/romstage.c" diff --git a/src/mainboard/asus/m4a785t_m/Kconfig b/src/mainboard/asus/m4a785t_m/Kconfig new file mode 100644 index 0000000..e774747 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/Kconfig @@ -0,0 +1,78 @@ +if BOARD_ASUS_M4A785TM + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR3 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default asus/m4a785t_m + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "M4A785T-M" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 19 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_0100009f.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif diff --git a/src/mainboard/asus/m4a785t_m/acpi/cpstate.asl b/src/mainboard/asus/m4a785t_m/acpi/cpstate.asl new file mode 100644 index 0000000..b38e59e --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi/cpstate.asl @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000BB8, + 0x000078D9, + 0x00000004, + 0x00000004, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x000008FC, + 0x0000659A, + 0x00000004, + 0x00000004, + 0x00000001, + 0x00000001 + }, + + Package () + { + 0x00000708, + 0x000056BF, + 0x00000004, + 0x00000004, + 0x00000002, + 0x00000002 + }, + + Package () + { + 0x00000320, + 0x00001FA1, + 0x00000004, + 0x00000004, + 0x00000003, + 0x00000003 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/m4a785t_m/acpi/ide.asl b/src/mainboard/asus/m4a785t_m/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/asus/m4a785t_m/acpi/routing.asl b/src/mainboard/asus/m4a785t_m/acpi/routing.asl new file mode 100644 index 0000000..7b54b24 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi/routing.asl @@ -0,0 +1,300 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTA, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0014FFFF, 0, 0, 16 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/asus/m4a785t_m/acpi/sata.asl b/src/mainboard/asus/m4a785t_m/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/asus/m4a785t_m/acpi/usb.asl b/src/mainboard/asus/m4a785t_m/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/asus/m4a785t_m/acpi_tables.c b/src/mainboard/asus/m4a785t_m/acpi_tables.c new file mode 100644 index 0000000..0e60131 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/acpi_tables.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/acpi_tables.c" diff --git a/src/mainboard/asus/m4a785t_m/board_info.txt b/src/mainboard/asus/m4a785t_m/board_info.txt new file mode 100644 index 0000000..375d74f --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m4a785t_m/cmos.default b/src/mainboard/asus/m4a785t_m/cmos.default new file mode 100644 index 0000000..da086de --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +ECC_memory=Enable +baud_rate=115200 +hw_scrubber=Enable +interleave_chip_selects=Enable +max_mem_clock=400Mhz +multi_core=Enable +power_on_after_fail=Disable +debug_level=Spew +boot_first=HDD +boot_second=Fallback_Floppy +boot_third=Fallback_Network +boot_index=0xf +boot_countdown=0xc +slow_cpu=off +nmi=Enable +iommu=Enable diff --git a/src/mainboard/asus/m4a785t_m/cmos.layout b/src/mainboard/asus/m4a785t_m/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m4a785t_m/devicetree.cb b/src/mainboard/asus/m4a785t_m/devicetree.cb new file mode 100644 index 0000000..9783989 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/devicetree.cb @@ -0,0 +1,108 @@ +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1043 0x83a2 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on # Internal Graphics P2P bridge 0x9602 + device pci 5.0 on end # onboard VGA + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 off end # + device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8712f + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + end + device pnp 2e.9 off # GAME + end + device pnp 2e.a off end # CIR + end #superio + end #LPC + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # chip northbridge + end #domain +end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a785t_m/dsdt.asl b/src/mainboard/asus/m4a785t_m/dsdt.asl new file mode 100644 index 0000000..4a56f26 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/dsdt.asl @@ -0,0 +1,1773 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASUS", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA,CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/asus/m4a785t_m/get_bus_conf.c b/src/mainboard/asus/m4a785t_m/get_bus_conf.c new file mode 100644 index 0000000..3580906 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/get_bus_conf.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/get_bus_conf.c" diff --git a/src/mainboard/asus/m4a785t_m/irq_tables.c b/src/mainboard/asus/m4a785t_m/irq_tables.c new file mode 100644 index 0000000..b12b616 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/irq_tables.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/irq_tables.c" diff --git a/src/mainboard/asus/m4a785t_m/mainboard.c b/src/mainboard/asus/m4a785t_m/mainboard.c new file mode 100644 index 0000000..fd0e9a6 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/mainboard.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/mainboard.c" diff --git a/src/mainboard/asus/m4a785t_m/mptable.c b/src/mainboard/asus/m4a785t_m/mptable.c new file mode 100644 index 0000000..1e5283b --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/mptable.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/mptable.c" diff --git a/src/mainboard/asus/m4a785t_m/romstage.c b/src/mainboard/asus/m4a785t_m/romstage.c new file mode 100644 index 0000000..6e0ef53 --- /dev/null +++ b/src/mainboard/asus/m4a785t_m/romstage.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Denis 'GNUtoo' Carikli GNUtoo@no-log.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../m4a785_m/romstage.c" diff --git a/src/mainboard/asus/m4a78_em/Kconfig b/src/mainboard/asus/m4a78_em/Kconfig new file mode 100644 index 0000000..edbc626 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/Kconfig @@ -0,0 +1,75 @@ +if BOARD_ASUS_M4A78_EM + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default asus/m4a78_em + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "M4A78-EM" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 18 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif diff --git a/src/mainboard/asus/m4a78_em/acpi/cpstate.asl b/src/mainboard/asus/m4a78_em/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/m4a78_em/acpi/ide.asl b/src/mainboard/asus/m4a78_em/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/asus/m4a78_em/acpi/routing.asl b/src/mainboard/asus/m4a78_em/acpi/routing.asl new file mode 100644 index 0000000..7b54b24 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi/routing.asl @@ -0,0 +1,300 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTA, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0014FFFF, 0, 0, 16 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/asus/m4a78_em/acpi/sata.asl b/src/mainboard/asus/m4a78_em/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/asus/m4a78_em/acpi/usb.asl b/src/mainboard/asus/m4a78_em/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/asus/m4a78_em/acpi_tables.c b/src/mainboard/asus/m4a78_em/acpi_tables.c new file mode 100644 index 0000000..7e159b4 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/acpi_tables.c @@ -0,0 +1,221 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asus/m4a78_em/board_info.txt b/src/mainboard/asus/m4a78_em/board_info.txt new file mode 100644 index 0000000..be683dd --- /dev/null +++ b/src/mainboard/asus/m4a78_em/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m4a78_em/cmos.layout b/src/mainboard/asus/m4a78_em/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m4a78_em/devicetree.cb b/src/mainboard/asus/m4a78_em/devicetree.cb new file mode 100644 index 0000000..e760c17 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/devicetree.cb @@ -0,0 +1,106 @@ +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1043 0x83f1 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # bridge to RTL8112 PCI Express Gigabit Ethernet + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "2" + + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8712f + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # Environment Controller + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + end + device pnp 2e.9 off # GAME + end + device pnp 2e.a off end # CIR + end #superio + end #LPC + device pci 14.4 on end # PCI to PCI Bridge [1002:4384] + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # chip northbridge + end #domain +end # northbridge/amd/amdfam10/root_complex diff --git a/src/mainboard/asus/m4a78_em/dsdt.asl b/src/mainboard/asus/m4a78_em/dsdt.asl new file mode 100644 index 0000000..ab58dd0 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASUS ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/asus/m4a78_em/get_bus_conf.c b/src/mainboard/asus/m4a78_em/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/asus/m4a78_em/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/asus/m4a78_em/irq_tables.c b/src/mainboard/asus/m4a78_em/irq_tables.c new file mode 100644 index 0000000..41d5880 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/irq_tables.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Juhana Helovuo juhe@iki.fi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x14 << 3) | 0x3, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1002, /* Vendor */ + 0x439d, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xca, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x01, (0x05 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x05 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x06 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x07 << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x02, (0x00 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0xa, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x0c << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x01, 0xdc90}, {0x02, 0xdc90}, {0x03, 0xdc90}, {0x04, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x03, 0xdc90}, {0x04, 0xdc90}, {0x01, 0xdc90}, {0x02, 0xdc90}}, 0x0, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x0c, 0xdc90}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x03, (0x06 << 3) | 0x0, {{0x0a, 0xdc90}, {0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}}, 0xd, 0x0}, + {0x03, (0x07 << 3) | 0x0, {{0x0b, 0xdc90}, {0x0c, 0xdc90}, {0x0d, 0xdc90}, {0x0a, 0xdc90}}, 0xe, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/m4a78_em/mainboard.c b/src/mainboard/asus/m4a78_em/mainboard.c new file mode 100644 index 0000000..1a2e9fc --- /dev/null +++ b/src/mainboard/asus/m4a78_em/mainboard.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + + +void set_pcie_dereset(void); +void set_pcie_reset(void); +u8 is_dev3_present(void); + +void set_pcie_dereset() +{ + u8 byte; + u16 word; + device_t sm_dev; + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 1 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte |= ((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 1 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word |= (1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +void set_pcie_reset() +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 0 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte &= ~((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 0 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word &= ~(1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +/* + * justify the dev3 is exist or not + * NOTE: This just copied from AMD Tilapia code. + * It is completly unknown if it will work at all for this board. + */ +u8 is_dev3_present(void) +{ + u16 word; + device_t sm_dev; + + /* access the smbus extended register */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* put the GPIO68 output to tristate */ + word = pci_read_config16(sm_dev, 0x7e); + word |= 1 << 6; + pci_write_config16(sm_dev, 0x7e,word); + + /* read the GPIO68 input status */ + word = pci_read_config16(sm_dev, 0x7e); + + if(word & (1 << 10)){ + /*not exist*/ + return 0; + }else{ + /*exist*/ + return 1; + } +} + + +/************************************************* +* enable the dedicated function in this board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ + /* set_thermal_config(); */ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/m4a78_em/mb_sysconf.h b/src/mainboard/asus/m4a78_em/mb_sysconf.h new file mode 100644 index 0000000..25d63d5 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/mb_sysconf.h @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/asus/m4a78_em/mptable.c b/src/mainboard/asus/m4a78_em/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/m4a78_em/resourcemap.c b/src/mainboard/asus/m4a78_em/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/asus/m4a78_em/romstage.c b/src/mainboard/asus/m4a78_em/romstage.c new file mode 100644 index 0000000..0a03d59 --- /dev/null +++ b/src/mainboard/asus/m4a78_em/romstage.c @@ -0,0 +1,256 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + + #if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); + #endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + + #if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + #endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/asus/m5a88-v/Kconfig b/src/mainboard/asus/m5a88-v/Kconfig deleted file mode 100644 index 40ac542..0000000 --- a/src/mainboard/asus/m5a88-v/Kconfig +++ /dev/null @@ -1,90 +0,0 @@ -if BOARD_ASUS_M5A88_V - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR3 - select DIMM_REGISTERED - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_ITE_IT8721F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - select ENABLE_APIC_EXT_ID - select GFXUMA - select HAVE_DEBUG_CAR - select SET_FIDVID - -config MAINBOARD_DIR - string - default asus/m5a88-v - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "M5A88-V" - -config HW_MEM_HOLE_SIZEK - hex - default 0x100000 - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000bf.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config VGA_BIOS_ID - string - default "1002,9715" - -endif #BOARD_ASUS_M5A88_V diff --git a/src/mainboard/asus/m5a88-v/Makefile.inc b/src/mainboard/asus/m5a88-v/Makefile.inc deleted file mode 100644 index 0bbc26f..0000000 --- a/src/mainboard/asus/m5a88-v/Makefile.inc +++ /dev/null @@ -1,15 +0,0 @@ - -#SB800 CIMx share AGESA V5 lib code -ifneq ($(CONFIG_CPU_AMD_AGESA),y) - AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 - romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - - AGESA_INC := -I$(AGESA_ROOT)/ \ - -I$(AGESA_ROOT)/Include \ - -I$(AGESA_ROOT)/Proc/IDS/ \ - -I$(AGESA_ROOT)/Proc/CPU/ \ - -I$(AGESA_ROOT)/Proc/CPU/Family - - CFLAGS_common += $(AGESA_INC) -endif diff --git a/src/mainboard/asus/m5a88-v/acpi/cpstate.asl b/src/mainboard/asus/m5a88-v/acpi/cpstate.asl deleted file mode 100644 index f2a0d62..0000000 --- a/src/mainboard/asus/m5a88-v/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/asus/m5a88-v/acpi/ide.asl b/src/mainboard/asus/m5a88-v/acpi/ide.asl deleted file mode 100644 index 4071f85..0000000 --- a/src/mainboard/asus/m5a88-v/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0, Serialized) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, Serialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF, 0, Serialized) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/asus/m5a88-v/acpi/routing.asl b/src/mainboard/asus/m5a88-v/acpi/routing.asl deleted file mode 100644 index 87a79f9..0000000 --- a/src/mainboard/asus/m5a88-v/acpi/routing.asl +++ /dev/null @@ -1,398 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/asus/m5a88-v/acpi/sata.asl b/src/mainboard/asus/m5a88-v/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/asus/m5a88-v/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/asus/m5a88-v/acpi/usb.asl b/src/mainboard/asus/m5a88-v/acpi/usb.asl deleted file mode 100644 index 48905a9..0000000 --- a/src/mainboard/asus/m5a88-v/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/asus/m5a88-v/acpi_tables.c b/src/mainboard/asus/m5a88-v/acpi_tables.c deleted file mode 100644 index 3f9bd60..0000000 --- a/src/mainboard/asus/m5a88-v/acpi_tables.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/asus/m5a88-v/board_info.txt b/src/mainboard/asus/m5a88-v/board_info.txt deleted file mode 100644 index 53f9b3f..0000000 --- a/src/mainboard/asus/m5a88-v/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.asus.com/Motherboards/AMD_AM3Plus/M5A88V_EVO/ -ROM package: DIP8 -ROM protocol: SPI -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/m5a88-v/cmos.layout b/src/mainboard/asus/m5a88-v/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/asus/m5a88-v/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/asus/m5a88-v/devicetree.cb b/src/mainboard/asus/m5a88-v/devicetree.cb deleted file mode 100644 index 65ddf30..0000000 --- a/src/mainboard/asus/m5a88-v/devicetree.cb +++ /dev/null @@ -1,124 +0,0 @@ -# sample config for advansus/A785E-I -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR3 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1043 0x843e inherit #TODO: Set the correctly subsystem id. - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # Ethernet - device pci a.0 on end # Ethernet - register "gppsb_configuration" = "4" # Configuration E - register "gpp_configuration" = "3" # Configuration D - register "port_enable" = "0x6f6" - register "gfx_dev2_dev3" = "0" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - register "gfx_tmds" = "1" - register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 - register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL - end - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC host controller [1002:439d] - chip superio/ite/it8721f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end #superio/ite/it8721f - end # LPC host controller [1002:439d] - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - device pci 15.0 on end # PCIe 0 - device pci 15.1 on end # PCIe 1 - device pci 15.2 on end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB - #register "gpp_configuration" = "0" #4:0:0:0 - #register "gpp_configuration" = "2" #2:2:0:0 - #register "gpp_configuration" = "3" #2:1:1:0 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #domain -end diff --git a/src/mainboard/asus/m5a88-v/dsdt.asl b/src/mainboard/asus/m5a88-v/dsdt.asl deleted file mode 100644 index 8ce2991..0000000 --- a/src/mainboard/asus/m5a88-v/dsdt.asl +++ /dev/null @@ -1,1824 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "ASUS ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) -#if 0 - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c deleted file mode 100644 index f90c6b8..0000000 --- a/src/mainboard/asus/m5a88-v/get_bus_conf.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdfam10_sysconf.h> -#if CONFIG_AMD_SB_CIMX -#include <sb_cimx.h> -#endif - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -int bus_isa; -u8 bus_rs780[11]; -u8 bus_sb800[6]; -u32 apicid_sb800; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_rs780; -u32 sbdn_sb800; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb800 = 0; - - memset(bus_sb800, 0, sizeof(bus_sb800)); - - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = bus_rs780[0]; - - - /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); - if (dev) { - bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - - for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); - if (dev) { - bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - if(255 != bus_rs780[i]) { - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - } - - /* I/O APICs: APIC ID Version State Address */ - bus_isa = 10; -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb800 = apicid_base + 0; - -#if CONFIG_AMD_SB_CIMX - sb_Late_Post(); -#endif -} diff --git a/src/mainboard/asus/m5a88-v/irq_tables.c b/src/mainboard/asus/m5a88-v/irq_tables.c deleted file mode 100644 index 067b2e6..0000000 --- a/src/mainboard/asus/m5a88-v/irq_tables.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam10_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_isa; -extern u8 bus_rs780[8]; -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/asus/m5a88-v/mainboard.c b/src/mainboard/asus/m5a88-v/mainboard.c deleted file mode 100644 index 8ee338e..0000000 --- a/src/mainboard/asus/m5a88-v/mainboard.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 QingPei Wang wangqingpei@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "SBPLATFORM.h" - - -u8 is_dev3_present(void); -void set_pcie_dereset(void); -void set_pcie_reset(void); -void enable_int_gfx(void); - -/* GPIO6. */ -void enable_int_gfx(void) -{ - volatile u8 *gpio_reg; - -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthuint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif - /* make sure the MMIO(fed80000) is accessible */ - RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ - - *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ - *(gpio_reg + 170) = 0x1; /* gpio_gate */ - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ - - *(gpio_reg + 0x6) = 0x8; - *(gpio_reg + 170) = 0x0; -} - -void set_pcie_dereset() -{ -} - -void set_pcie_reset(void) -{ -} - -u8 is_dev3_present(void) -{ - return 0; -} - - -/************************************************* -* enable the dedicated function in M5A88-V board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - - printk(BIOS_INFO, "Mainboard ASUS M5A88-V Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - enable_int_gfx(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/asus/m5a88-v/mb_sysconf.h b/src/mainboard/asus/m5a88-v/mb_sysconf.h deleted file mode 100644 index 8a693fd..0000000 --- a/src/mainboard/asus/m5a88-v/mb_sysconf.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/asus/m5a88-v/mptable.c b/src/mainboard/asus/m5a88-v/mptable.c deleted file mode 100644 index 5259dec..0000000 --- a/src/mainboard/asus/m5a88-v/mptable.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include <SBPLATFORM.h> - -extern int bus_isa; -extern u8 bus_rs780[11]; -extern u8 bus_sb800[6]; -extern u32 apicid_sb800; -extern u32 sbdn_rs780; -extern u32 sbdn_sb800; - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - u32 dword; - u8 byte; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); - dword &= 0xFFFFFFF0; - smp_write_ioapic(mc, apicid_sb800, 0x11, dword); - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/m5a88-v/platform_cfg.h b/src/mainboard/asus/m5a88-v/platform_cfg.h deleted file mode 100644 index 6944ab2..0000000 --- a/src/mainboard/asus/m5a88-v/platform_cfg.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -/** - * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address - */ -#define SIO_HWM_BASE_ADDRESS 0x290 - -#endif diff --git a/src/mainboard/asus/m5a88-v/resourcemap.c b/src/mainboard/asus/m5a88-v/resourcemap.c deleted file mode 100644 index 183883a..0000000 --- a/src/mainboard/asus/m5a88-v/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c deleted file mode 100644 index 4753bb0..0000000 --- a/src/mainboard/asus/m5a88-v/romstage.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <lib.h> -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8721f/it8721f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include <sb_cimx.h> -#include <SBPLATFORM.h> /* SB OEM constants */ -#include <southbridge/amd/cimx/sb800/smbus.h> -#include "northbridge/amd/amdfam10/debug.c" - -static void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include "spd.h" -#include <reset.h> - -#define SERIAL_DEV PNP_DEV(0x4e, IT8721F_SP1) -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - //enable port80 decoding and southbridge poweron init - sb_Poweron_Init(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb800_clk_output_48Mhz(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - printk(BIOS_DEBUG, "\n"); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// ram_check(0x00200000, 0x00200000 + (640 * 1024)); -// ram_check(0x40200000, 0x40200000 + (640 * 1024)); - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - - return 0; -} diff --git a/src/mainboard/asus/m5a88_v/Kconfig b/src/mainboard/asus/m5a88_v/Kconfig new file mode 100644 index 0000000..dd61cae --- /dev/null +++ b/src/mainboard/asus/m5a88_v/Kconfig @@ -0,0 +1,90 @@ +if BOARD_ASUS_M5A88_V + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR3 + select DIMM_REGISTERED + select QRANK_DIMM_SUPPORT + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_ITE_IT8721F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_2048 + select ENABLE_APIC_EXT_ID + select GFXUMA + select HAVE_DEBUG_CAR + select SET_FIDVID + +config MAINBOARD_DIR + string + default asus/m5a88_v + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "M5A88-V" + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000bf.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config VGA_BIOS_ID + string + default "1002,9715" + +endif #BOARD_ASUS_M5A88_V diff --git a/src/mainboard/asus/m5a88_v/Makefile.inc b/src/mainboard/asus/m5a88_v/Makefile.inc new file mode 100644 index 0000000..0bbc26f --- /dev/null +++ b/src/mainboard/asus/m5a88_v/Makefile.inc @@ -0,0 +1,15 @@ + +#SB800 CIMx share AGESA V5 lib code +ifneq ($(CONFIG_CPU_AMD_AGESA),y) + AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 + romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + + AGESA_INC := -I$(AGESA_ROOT)/ \ + -I$(AGESA_ROOT)/Include \ + -I$(AGESA_ROOT)/Proc/IDS/ \ + -I$(AGESA_ROOT)/Proc/CPU/ \ + -I$(AGESA_ROOT)/Proc/CPU/Family + + CFLAGS_common += $(AGESA_INC) +endif diff --git a/src/mainboard/asus/m5a88_v/acpi/cpstate.asl b/src/mainboard/asus/m5a88_v/acpi/cpstate.asl new file mode 100644 index 0000000..f2a0d62 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/asus/m5a88_v/acpi/ide.asl b/src/mainboard/asus/m5a88_v/acpi/ide.asl new file mode 100644 index 0000000..4071f85 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0, Serialized) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, Serialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF, 0, Serialized) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/asus/m5a88_v/acpi/routing.asl b/src/mainboard/asus/m5a88_v/acpi/routing.asl new file mode 100644 index 0000000..87a79f9 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi/routing.asl @@ -0,0 +1,398 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/asus/m5a88_v/acpi/sata.asl b/src/mainboard/asus/m5a88_v/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/asus/m5a88_v/acpi/usb.asl b/src/mainboard/asus/m5a88_v/acpi/usb.asl new file mode 100644 index 0000000..48905a9 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/asus/m5a88_v/acpi_tables.c b/src/mainboard/asus/m5a88_v/acpi_tables.c new file mode 100644 index 0000000..3f9bd60 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/acpi_tables.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/asus/m5a88_v/board_info.txt b/src/mainboard/asus/m5a88_v/board_info.txt new file mode 100644 index 0000000..53f9b3f --- /dev/null +++ b/src/mainboard/asus/m5a88_v/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.asus.com/Motherboards/AMD_AM3Plus/M5A88V_EVO/ +ROM package: DIP8 +ROM protocol: SPI +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/m5a88_v/cmos.layout b/src/mainboard/asus/m5a88_v/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/asus/m5a88_v/devicetree.cb b/src/mainboard/asus/m5a88_v/devicetree.cb new file mode 100644 index 0000000..6b4cdcb --- /dev/null +++ b/src/mainboard/asus/m5a88_v/devicetree.cb @@ -0,0 +1,124 @@ +# sample config for advansus/A785E_I +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR3 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1043 0x843e inherit #TODO: Set the correctly subsystem id. + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 wireless + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # Ethernet + device pci a.0 on end # Ethernet + register "gppsb_configuration" = "4" # Configuration E + register "gpp_configuration" = "3" # Configuration D + register "port_enable" = "0x6f6" + register "gfx_dev2_dev3" = "0" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + register "gfx_tmds" = "1" + register "gfx_pcie_config" = "3" # 1x8 GFX on Lanes 8-15 + register "gfx_ddi_config" = "1" # Lanes 0-3 DDI_SL + end + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC host controller [1002:439d] + chip superio/ite/it8721f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end #superio/ite/it8721f + end # LPC host controller [1002:439d] + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 15.0 on end # PCIe 0 + device pci 15.1 on end # PCIe 1 + device pci 15.2 on end # PCIe 2 + device pci 15.3 on end # PCIe 3 + device pci 16.0 on end # USB + device pci 16.2 on end # USB + #register "gpp_configuration" = "0" #4:0:0:0 + #register "gpp_configuration" = "2" #2:2:0:0 + #register "gpp_configuration" = "3" #2:1:1:0 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end #domain +end diff --git a/src/mainboard/asus/m5a88_v/dsdt.asl b/src/mainboard/asus/m5a88_v/dsdt.asl new file mode 100644 index 0000000..8ce2991 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/dsdt.asl @@ -0,0 +1,1824 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "ASUS ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PIRA) + Store(0, PIRB) + Store(0, PIRC) + Store(0, PIRD) + Store(0, PIRE) + Store(0, PIRF) + Store(0, PIRG) + Store(0, PIRH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PIRA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PIRB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PIRC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIRD) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PIRE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PIRF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PIRG) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PIRH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) +#if 0 + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ +#if 0 + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +#endif +} +/* End of ASL file */ diff --git a/src/mainboard/asus/m5a88_v/get_bus_conf.c b/src/mainboard/asus/m5a88_v/get_bus_conf.c new file mode 100644 index 0000000..f90c6b8 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/get_bus_conf.c @@ -0,0 +1,141 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdfam10_sysconf.h> +#if CONFIG_AMD_SB_CIMX +#include <sb_cimx.h> +#endif + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +int bus_isa; +u8 bus_rs780[11]; +u8 bus_sb800[6]; +u32 apicid_sb800; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + + +u32 sbdn_rs780; +u32 sbdn_sb800; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb800 = 0; + + memset(bus_sb800, 0, sizeof(bus_sb800)); + + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb800[0] = bus_rs780[0]; + + + /* sb800 */ + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + if (dev) { + bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); + if (dev) { + bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + if(255 != bus_rs780[i]) { + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + } + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb800 = apicid_base + 0; + +#if CONFIG_AMD_SB_CIMX + sb_Late_Post(); +#endif +} diff --git a/src/mainboard/asus/m5a88_v/irq_tables.c b/src/mainboard/asus/m5a88_v/irq_tables.c new file mode 100644 index 0000000..067b2e6 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/irq_tables.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam10_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern u8 bus_isa; +extern u8 bus_rs780[8]; +extern u8 bus_sb800[6]; +extern unsigned long sbdn_sb800; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb800[0]; + pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/asus/m5a88_v/mainboard.c b/src/mainboard/asus/m5a88_v/mainboard.c new file mode 100644 index 0000000..8ee338e --- /dev/null +++ b/src/mainboard/asus/m5a88_v/mainboard.c @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 QingPei Wang wangqingpei@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "SBPLATFORM.h" + + +u8 is_dev3_present(void); +void set_pcie_dereset(void); +void set_pcie_reset(void); +void enable_int_gfx(void); + +/* GPIO6. */ +void enable_int_gfx(void) +{ + volatile u8 *gpio_reg; + +#ifdef UNUSED_CODE + RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ + RWPMIO(SB_PMIOA_REGF6, AccWidthuint8, ~(BIT0), BIT0); /* Disable Gec */ +#endif + /* make sure the MMIO(fed80000) is accessible */ + RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ + + *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ + *(gpio_reg + 170) = 0x1; /* gpio_gate */ + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ + + *(gpio_reg + 0x6) = 0x8; + *(gpio_reg + 170) = 0x0; +} + +void set_pcie_dereset() +{ +} + +void set_pcie_reset(void) +{ +} + +u8 is_dev3_present(void) +{ + return 0; +} + + +/************************************************* +* enable the dedicated function in M5A88-V board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + + printk(BIOS_INFO, "Mainboard ASUS M5A88-V Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + enable_int_gfx(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/asus/m5a88_v/mb_sysconf.h b/src/mainboard/asus/m5a88_v/mb_sysconf.h new file mode 100644 index 0000000..8a693fd --- /dev/null +++ b/src/mainboard/asus/m5a88_v/mb_sysconf.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/asus/m5a88_v/mptable.c b/src/mainboard/asus/m5a88_v/mptable.c new file mode 100644 index 0000000..5259dec --- /dev/null +++ b/src/mainboard/asus/m5a88_v/mptable.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include <SBPLATFORM.h> + +extern int bus_isa; +extern u8 bus_rs780[11]; +extern u8 bus_sb800[6]; +extern u32 apicid_sb800; +extern u32 sbdn_rs780; +extern u32 sbdn_sb800; + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + u32 dword; + u8 byte; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); + dword &= 0xFFFFFFF0; + smp_write_ioapic(mc, apicid_sb800, 0x11, dword); + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/m5a88_v/platform_cfg.h b/src/mainboard/asus/m5a88_v/platform_cfg.h new file mode 100644 index 0000000..6944ab2 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/platform_cfg.h @@ -0,0 +1,219 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +/** + * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address + */ +#define SIO_HWM_BASE_ADDRESS 0x290 + +#endif diff --git a/src/mainboard/asus/m5a88_v/resourcemap.c b/src/mainboard/asus/m5a88_v/resourcemap.c new file mode 100644 index 0000000..183883a --- /dev/null +++ b/src/mainboard/asus/m5a88_v/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/asus/m5a88_v/romstage.c b/src/mainboard/asus/m5a88_v/romstage.c new file mode 100644 index 0000000..4753bb0 --- /dev/null +++ b/src/mainboard/asus/m5a88_v/romstage.c @@ -0,0 +1,250 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <lib.h> +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8721f/it8721f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include <sb_cimx.h> +#include <SBPLATFORM.h> /* SB OEM constants */ +#include <southbridge/amd/cimx/sb800/smbus.h> +#include "northbridge/amd/amdfam10/debug.c" + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include "spd.h" +#include <reset.h> + +#define SERIAL_DEV PNP_DEV(0x4e, IT8721F_SP1) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + //enable port80 decoding and southbridge poweron init + sb_Poweron_Init(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb800_clk_output_48Mhz(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + printk(BIOS_DEBUG, "\n"); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// ram_check(0x00200000, 0x00200000 + (640 * 1024)); +// ram_check(0x40200000, 0x40200000 + (640 * 1024)); + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + + return 0; +} diff --git a/src/mainboard/asus/mew-am/Kconfig b/src/mainboard/asus/mew-am/Kconfig deleted file mode 100644 index 509d281..0000000 --- a/src/mainboard/asus/mew-am/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_MEW_AM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_PGA370 - select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801AX - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default asus/mew-am - -config MAINBOARD_PART_NUMBER - string - default "MEW-AM" - -config IRQ_SLOT_COUNT - int - default 8 - -endif # BOARD_ASUS_MEW_AM diff --git a/src/mainboard/asus/mew-am/board_info.txt b/src/mainboard/asus/mew-am/board_info.txt deleted file mode 100644 index 7b22f82..0000000 --- a/src/mainboard/asus/mew-am/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/ -ROM package: PLCC -ROM socketed: y -Flashrom support: n diff --git a/src/mainboard/asus/mew-am/devicetree.cb b/src/mainboard/asus/mew-am/devicetree.cb deleted file mode 100644 index 8a20cab..0000000 --- a/src/mainboard/asus/mew-am/devicetree.cb +++ /dev/null @@ -1,60 +0,0 @@ -chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) - device pci 1.0 on end # Chipset Graphics Controller (CGC) - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" - - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA bridge - chip superio/smsc/smscsuperio # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 2e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 2e.9 on # Game port - io 0x60 = 0x201 - end - device pnp 2e.a on # Power-management events (PME) - io 0x60 = 0x600 - end - device pnp 2e.b on # MIDI port (MPU-401) - io 0x60 = 0x330 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMbus - device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip) - device pci 1f.6 off end # AC'97 modem (N/A) - end - end -end diff --git a/src/mainboard/asus/mew-am/irq_tables.c b/src/mainboard/asus/mew-am/irq_tables.c deleted file mode 100644 index 06968d5..0000000 --- a/src/mainboard/asus/mew-am/irq_tables.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xe3, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x1e<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - {0x01,(0x08<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, - {0x01,(0x09<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, - {0x01,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, - {0x01,(0x0b<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, - {0x00,(0x1f<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - {0x01,(0x02<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/mew-am/romstage.c b/src/mainboard/asus/mew-am/romstage.c deleted file mode 100644 index 7a79e85..0000000 --- a/src/mainboard/asus/mew-am/romstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82801ax/i82801ax.h" -#include "northbridge/intel/i82810/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "cpu/x86/bist.h" -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/mew-vm/Kconfig b/src/mainboard/asus/mew-vm/Kconfig deleted file mode 100644 index 46b6eb8..0000000 --- a/src/mainboard/asus/mew-vm/Kconfig +++ /dev/null @@ -1,44 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_MEW_VM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_PGA370 - select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801AX - select SUPERIO_SMSC_LPC47B272 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default asus/mew-vm - -config MAINBOARD_PART_NUMBER - string - default "MEW-VM" - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_ASUS_MEW_VM diff --git a/src/mainboard/asus/mew-vm/board_info.txt b/src/mainboard/asus/mew-vm/board_info.txt deleted file mode 100644 index 78640a0..0000000 --- a/src/mainboard/asus/mew-vm/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm -ROM package: PLCC -ROM socketed: y -Flashrom support: n diff --git a/src/mainboard/asus/mew-vm/cmos.layout b/src/mainboard/asus/mew-vm/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/asus/mew-vm/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/asus/mew-vm/devicetree.cb b/src/mainboard/asus/mew-vm/devicetree.cb deleted file mode 100644 index e0cc9e3..0000000 --- a/src/mainboard/asus/mew-vm/devicetree.cb +++ /dev/null @@ -1,52 +0,0 @@ -chip northbridge/intel/i82810 - device domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 on # Onboard Video - # device pci 1.0 on end - end - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" - - device pci 1e.0 on # PCI Bridge - # device pci 1.0 on end - end - device pci 1f.0 on # ISA/LPC? Bridge - chip superio/smsc/lpc47b272 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.a off end # ACPI - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # AC'97, no header on MEW-VM - device pci 1f.6 off end # AC'97 Modem (MC'97) - end - end - chip cpu/intel/socket_PGA370 - end -end - diff --git a/src/mainboard/asus/mew-vm/irq_tables.c b/src/mainboard/asus/mew-vm/irq_tables.c deleted file mode 100644 index 4fbf122..0000000 --- a/src/mainboard/asus/mew-vm/irq_tables.c +++ /dev/null @@ -1,42 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0xe20, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7120, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x89, /* u8 checksum , this has to set to some value -that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x08<<3)|0x0, {{0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0xdea0}, {0x01, 0x0dea0}}, 0x1, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x03, 0xdea0}, {0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0x0dea0}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0x0dea0}}, 0x3, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0x0dea0}}, 0x4, 0x0}, - {0x00,(0x0c<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x5, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x6, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x00, 0xdea0}, {0x00, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x01, 0xdea0}, {0x00, 0xdea0}, {0x00, 0xdea0}, {0x00, 0x0dea0}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/mew-vm/romstage.c b/src/mainboard/asus/mew-vm/romstage.c deleted file mode 100644 index 04bbd86..0000000 --- a/src/mainboard/asus/mew-vm/romstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Corey Osgood corey.osgood@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "superio/smsc/lpc47b272/early_serial.c" -#include "northbridge/intel/i82810/raminit.h" -#include "cpu/x86/bist.h" -#include "southbridge/intel/i82801ax/i82801ax.h" -#include "drivers/pc80/udelay_io.c" -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1) - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - lpc47b272_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_smbus(); - report_bist_failure(bist); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/mew_am/Kconfig b/src/mainboard/asus/mew_am/Kconfig new file mode 100644 index 0000000..e5cd5f5 --- /dev/null +++ b/src/mainboard/asus/mew_am/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_MEW_AM + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801AX + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default asus/mew_am + +config MAINBOARD_PART_NUMBER + string + default "MEW-AM" + +config IRQ_SLOT_COUNT + int + default 8 + +endif # BOARD_ASUS_MEW_AM diff --git a/src/mainboard/asus/mew_am/board_info.txt b/src/mainboard/asus/mew_am/board_info.txt new file mode 100644 index 0000000..7b22f82 --- /dev/null +++ b/src/mainboard/asus/mew_am/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/ +ROM package: PLCC +ROM socketed: y +Flashrom support: n diff --git a/src/mainboard/asus/mew_am/devicetree.cb b/src/mainboard/asus/mew_am/devicetree.cb new file mode 100644 index 0000000..8a20cab --- /dev/null +++ b/src/mainboard/asus/mew_am/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end # Chipset Graphics Controller (CGC) + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/smsc/smscsuperio # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 2e.9 on # Game port + io 0x60 = 0x201 + end + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x600 + end + device pnp 2e.b on # MIDI port (MPU-401) + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMbus + device pci 1f.5 off end # AC'97 audio (N/A, uses CS4280 chip) + device pci 1f.6 off end # AC'97 modem (N/A) + end + end +end diff --git a/src/mainboard/asus/mew_am/irq_tables.c b/src/mainboard/asus/mew_am/irq_tables.c new file mode 100644 index 0000000..06968d5 --- /dev/null +++ b/src/mainboard/asus/mew_am/irq_tables.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xe3, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x1e<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + {0x01,(0x08<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, + {0x01,(0x09<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, + {0x01,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, + {0x01,(0x0b<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, + {0x00,(0x1f<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + {0x01,(0x02<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/mew_am/romstage.c b/src/mainboard/asus/mew_am/romstage.c new file mode 100644 index 0000000..7a79e85 --- /dev/null +++ b/src/mainboard/asus/mew_am/romstage.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82801ax/i82801ax.h" +#include "northbridge/intel/i82810/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "cpu/x86/bist.h" +#include <superio/smsc/smscsuperio/smscsuperio.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/mew_vm/Kconfig b/src/mainboard/asus/mew_vm/Kconfig new file mode 100644 index 0000000..a4e7cfc --- /dev/null +++ b/src/mainboard/asus/mew_vm/Kconfig @@ -0,0 +1,44 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_MEW_VM + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801AX + select SUPERIO_SMSC_LPC47B272 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default asus/mew_vm + +config MAINBOARD_PART_NUMBER + string + default "MEW-VM" + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_ASUS_MEW_VM diff --git a/src/mainboard/asus/mew_vm/board_info.txt b/src/mainboard/asus/mew_vm/board_info.txt new file mode 100644 index 0000000..78640a0 --- /dev/null +++ b/src/mainboard/asus/mew_vm/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm +ROM package: PLCC +ROM socketed: y +Flashrom support: n diff --git a/src/mainboard/asus/mew_vm/cmos.layout b/src/mainboard/asus/mew_vm/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/asus/mew_vm/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/asus/mew_vm/devicetree.cb b/src/mainboard/asus/mew_vm/devicetree.cb new file mode 100644 index 0000000..e0cc9e3 --- /dev/null +++ b/src/mainboard/asus/mew_vm/devicetree.cb @@ -0,0 +1,52 @@ +chip northbridge/intel/i82810 + device domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 on # Onboard Video + # device pci 1.0 on end + end + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on # PCI Bridge + # device pci 1.0 on end + end + device pci 1f.0 on # ISA/LPC? Bridge + chip superio/smsc/lpc47b272 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.a off end # ACPI + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # AC'97, no header on MEW-VM + device pci 1f.6 off end # AC'97 Modem (MC'97) + end + end + chip cpu/intel/socket_PGA370 + end +end + diff --git a/src/mainboard/asus/mew_vm/irq_tables.c b/src/mainboard/asus/mew_vm/irq_tables.c new file mode 100644 index 0000000..4fbf122 --- /dev/null +++ b/src/mainboard/asus/mew_vm/irq_tables.c @@ -0,0 +1,42 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0xe20, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7120, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x89, /* u8 checksum , this has to set to some value +that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x08<<3)|0x0, {{0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0xdea0}, {0x01, 0x0dea0}}, 0x1, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x03, 0xdea0}, {0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0x0dea0}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0x0dea0}}, 0x3, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x04, 0xdea0}, {0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0x0dea0}}, 0x4, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x5, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x6, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdea0}, {0x00, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdea0}, {0x02, 0xdea0}, {0x03, 0xdea0}, {0x04, 0x0dea0}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdea0}, {0x00, 0xdea0}, {0x00, 0xdea0}, {0x00, 0x0dea0}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/mew_vm/romstage.c b/src/mainboard/asus/mew_vm/romstage.c new file mode 100644 index 0000000..04bbd86 --- /dev/null +++ b/src/mainboard/asus/mew_vm/romstage.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood corey.osgood@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "superio/smsc/lpc47b272/early_serial.c" +#include "northbridge/intel/i82810/raminit.h" +#include "cpu/x86/bist.h" +#include "southbridge/intel/i82801ax/i82801ax.h" +#include "drivers/pc80/udelay_io.c" +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1) + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + lpc47b272_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + enable_smbus(); + report_bist_failure(bist); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/p2b-d/Kconfig b/src/mainboard/asus/p2b-d/Kconfig deleted file mode 100644 index b84a142..0000000 --- a/src/mainboard/asus/p2b-d/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_P2B_D - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SMP - select IOAPIC - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select SDRAMPWR_4DIMM - -config MAINBOARD_DIR - string - default asus/p2b-d - -config MAINBOARD_PART_NUMBER - string - default "P2B-D" - -config IRQ_SLOT_COUNT - int - default 6 - -config MAX_CPUS - int - default 2 - -endif # BOARD_ASUS_P2B_D diff --git a/src/mainboard/asus/p2b-d/board_info.txt b/src/mainboard/asus/p2b-d/board_info.txt deleted file mode 100644 index ee3ffa7..0000000 --- a/src/mainboard/asus/p2b-d/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/ -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/p2b-d/devicetree.cb b/src/mainboard/asus/p2b-d/devicetree.cb deleted file mode 100644 index fe82a0d..0000000 --- a/src/mainboard/asus/p2b-d/devicetree.cb +++ /dev/null @@ -1,62 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/intel/slot_1 # CPU socket 0 - device lapic 0 on end # Local APIC of CPU 0 - end - chip cpu/intel/slot_1 # CPU socket 1 - device lapic 1 on end # Local APIC of CPU 1 - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/asus/p2b-d/irq_tables.c b/src/mainboard/asus/p2b-d/irq_tables.c deleted file mode 100644 index af6f851..0000000 --- a/src/mainboard/asus/p2b-d/irq_tables.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x04 << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x54, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, - {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/p2b-d/mptable.c b/src/mainboard/asus/p2b-d/mptable.c deleted file mode 100644 index 51d00a3..0000000 --- a/src/mainboard/asus/p2b-d/mptable.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - int ioapic_id, ioapic_ver, isa_bus; - struct mp_config_table *mc; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - - ioapic_id = 2; - ioapic_ver = 0x11; /* External Intel 82093AA IOAPIC. */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); - - /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x13, ioapic_id, 0x13); /* UHCI */ - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/p2b-d/romstage.c b/src/mainboard/asus/p2b-d/romstage.c deleted file mode 100644 index d41afc8..0000000 --- a/src/mainboard/asus/p2b-d/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/p2b-ds/Kconfig b/src/mainboard/asus/p2b-ds/Kconfig deleted file mode 100644 index 6a70e71..0000000 --- a/src/mainboard/asus/p2b-ds/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_P2B_DS - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SMP - select IOAPIC - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select SDRAMPWR_4DIMM - -config MAINBOARD_DIR - string - default asus/p2b-ds - -config MAINBOARD_PART_NUMBER - string - default "P2B-DS" - -config IRQ_SLOT_COUNT - int - default 7 - -config MAX_CPUS - int - default 2 - -endif # BOARD_ASUS_P2B_DS diff --git a/src/mainboard/asus/p2b-ds/board_info.txt b/src/mainboard/asus/p2b-ds/board_info.txt deleted file mode 100644 index cf8f69c..0000000 --- a/src/mainboard/asus/p2b-ds/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/ -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/p2b-ds/devicetree.cb b/src/mainboard/asus/p2b-ds/devicetree.cb deleted file mode 100644 index b8e9e85..0000000 --- a/src/mainboard/asus/p2b-ds/devicetree.cb +++ /dev/null @@ -1,63 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/intel/slot_1 # CPU socket 0 - device lapic 0 on end # Local APIC of CPU 0 - end - chip cpu/intel/slot_1 # CPU socket 1 - device lapic 1 on end # Local APIC of CPU 1 - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - device pci 6.0 on end # Onboard SCSI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/asus/p2b-ds/irq_tables.c b/src/mainboard/asus/p2b-ds/irq_tables.c deleted file mode 100644 index b678520..0000000 --- a/src/mainboard/asus/p2b-ds/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x04 << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x36, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, - {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x06 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/p2b-ds/mptable.c b/src/mainboard/asus/p2b-ds/mptable.c deleted file mode 100644 index ee3c20e..0000000 --- a/src/mainboard/asus/p2b-ds/mptable.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - int ioapic_id, ioapic_ver, isa_bus; - struct mp_config_table *mc; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - - ioapic_id = 2; - ioapic_ver = 0x11; /* External Intel 82093AA IOAPIC. */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); - - /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x13, ioapic_id, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x18, ioapic_id, 0x13); - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, 0x1); - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/asus/p2b-ds/romstage.c b/src/mainboard/asus/p2b-ds/romstage.c deleted file mode 100644 index 494a3f0..0000000 --- a/src/mainboard/asus/p2b-ds/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/p2b-f/Kconfig b/src/mainboard/asus/p2b-f/Kconfig deleted file mode 100644 index 07fa744..0000000 --- a/src/mainboard/asus/p2b-f/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_P2B_F - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default asus/p2b-f - -config MAINBOARD_PART_NUMBER - string - default "P2B-F" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_ASUS_P2B_F diff --git a/src/mainboard/asus/p2b-f/board_info.txt b/src/mainboard/asus/p2b-f/board_info.txt deleted file mode 100644 index 7176770..0000000 --- a/src/mainboard/asus/p2b-f/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-f/ -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/p2b-f/devicetree.cb b/src/mainboard/asus/p2b-f/devicetree.cb deleted file mode 100644 index 5bee5ae..0000000 --- a/src/mainboard/asus/p2b-f/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/asus/p2b-f/irq_tables.c b/src/mainboard/asus/p2b-f/irq_tables.c deleted file mode 100644 index a66761f..0000000 --- a/src/mainboard/asus/p2b-f/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x04 << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf9, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0c<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x5, 0x0}, - {0x00,(0x04<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/p2b-f/romstage.c b/src/mainboard/asus/p2b-f/romstage.c deleted file mode 100644 index 1b905e4..0000000 --- a/src/mainboard/asus/p2b-f/romstage.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -/* FIXME: The ASUS P2B-F has a Winbond W83977EF, actually. */ -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -/* FIXME: The ASUS P2B-F has a Winbond W83977EF, actually. */ -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/p2b-ls/Kconfig b/src/mainboard/asus/p2b-ls/Kconfig deleted file mode 100644 index 3822eb7..0000000 --- a/src/mainboard/asus/p2b-ls/Kconfig +++ /dev/null @@ -1,44 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Keith Hui buurin@gmail.com -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_P2B_LS - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select SDRAMPWR_4DIMM - -config MAINBOARD_DIR - string - default asus/p2b-ls - -config MAINBOARD_PART_NUMBER - string - default "P2B-LS" - -config IRQ_SLOT_COUNT - int - default 8 - -endif # BOARD_ASUS_P2B_LS diff --git a/src/mainboard/asus/p2b-ls/board_info.txt b/src/mainboard/asus/p2b-ls/board_info.txt deleted file mode 100644 index 6a957c3..0000000 --- a/src/mainboard/asus/p2b-ls/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ls/ -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/p2b-ls/devicetree.cb b/src/mainboard/asus/p2b-ls/devicetree.cb deleted file mode 100644 index 9a785da..0000000 --- a/src/mainboard/asus/p2b-ls/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - device pci 6.0 on end # Onboard SCSI - device pci 7.0 on end # Onboard LAN - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/asus/p2b-ls/irq_tables.c b/src/mainboard/asus/p2b-ls/irq_tables.c deleted file mode 100644 index e5ff319..0000000 --- a/src/mainboard/asus/p2b-ls/irq_tables.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Keith Hui buurin@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x04 << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x10, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, - {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x06 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x0, 0x0}, - {0x00, (0x07 << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/p2b-ls/romstage.c b/src/mainboard/asus/p2b-ls/romstage.c deleted file mode 100644 index 09b9a4e..0000000 --- a/src/mainboard/asus/p2b-ls/romstage.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -/* FIXME: The ASUS P2B-LS has a Winbond W83977EF, actually. */ -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/asus/p2b_d/Kconfig b/src/mainboard/asus/p2b_d/Kconfig new file mode 100644 index 0000000..821b6c3 --- /dev/null +++ b/src/mainboard/asus/p2b_d/Kconfig @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_P2B_D + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SMP + select IOAPIC + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + select SDRAMPWR_4DIMM + +config MAINBOARD_DIR + string + default asus/p2b_d + +config MAINBOARD_PART_NUMBER + string + default "P2B-D" + +config IRQ_SLOT_COUNT + int + default 6 + +config MAX_CPUS + int + default 2 + +endif # BOARD_ASUS_P2B_D diff --git a/src/mainboard/asus/p2b_d/board_info.txt b/src/mainboard/asus/p2b_d/board_info.txt new file mode 100644 index 0000000..ee3ffa7 --- /dev/null +++ b/src/mainboard/asus/p2b_d/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/ +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/p2b_d/devicetree.cb b/src/mainboard/asus/p2b_d/devicetree.cb new file mode 100644 index 0000000..fe82a0d --- /dev/null +++ b/src/mainboard/asus/p2b_d/devicetree.cb @@ -0,0 +1,62 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/intel/slot_1 # CPU socket 0 + device lapic 0 on end # Local APIC of CPU 0 + end + chip cpu/intel/slot_1 # CPU socket 1 + device lapic 1 on end # Local APIC of CPU 1 + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/asus/p2b_d/irq_tables.c b/src/mainboard/asus/p2b_d/irq_tables.c new file mode 100644 index 0000000..af6f851 --- /dev/null +++ b/src/mainboard/asus/p2b_d/irq_tables.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x04 << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x54, /* Checksum */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/p2b_d/mptable.c b/src/mainboard/asus/p2b_d/mptable.c new file mode 100644 index 0000000..51d00a3 --- /dev/null +++ b/src/mainboard/asus/p2b_d/mptable.c @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + int ioapic_id, ioapic_ver, isa_bus; + struct mp_config_table *mc; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + ioapic_id = 2; + ioapic_ver = 0x11; /* External Intel 82093AA IOAPIC. */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); + + /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x13, ioapic_id, 0x13); /* UHCI */ + + /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/p2b_d/romstage.c b/src/mainboard/asus/p2b_d/romstage.c new file mode 100644 index 0000000..d41afc8 --- /dev/null +++ b/src/mainboard/asus/p2b_d/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/p2b_ds/Kconfig b/src/mainboard/asus/p2b_ds/Kconfig new file mode 100644 index 0000000..e663eea --- /dev/null +++ b/src/mainboard/asus/p2b_ds/Kconfig @@ -0,0 +1,51 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_P2B_DS + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SMP + select IOAPIC + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + select SDRAMPWR_4DIMM + +config MAINBOARD_DIR + string + default asus/p2b_ds + +config MAINBOARD_PART_NUMBER + string + default "P2B-DS" + +config IRQ_SLOT_COUNT + int + default 7 + +config MAX_CPUS + int + default 2 + +endif # BOARD_ASUS_P2B_DS diff --git a/src/mainboard/asus/p2b_ds/board_info.txt b/src/mainboard/asus/p2b_ds/board_info.txt new file mode 100644 index 0000000..cf8f69c --- /dev/null +++ b/src/mainboard/asus/p2b_ds/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/ +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/p2b_ds/devicetree.cb b/src/mainboard/asus/p2b_ds/devicetree.cb new file mode 100644 index 0000000..b8e9e85 --- /dev/null +++ b/src/mainboard/asus/p2b_ds/devicetree.cb @@ -0,0 +1,63 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/intel/slot_1 # CPU socket 0 + device lapic 0 on end # Local APIC of CPU 0 + end + chip cpu/intel/slot_1 # CPU socket 1 + device lapic 1 on end # Local APIC of CPU 1 + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + device pci 6.0 on end # Onboard SCSI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/asus/p2b_ds/irq_tables.c b/src/mainboard/asus/p2b_ds/irq_tables.c new file mode 100644 index 0000000..b678520 --- /dev/null +++ b/src/mainboard/asus/p2b_ds/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x04 << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x36, /* Checksum */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x06 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/p2b_ds/mptable.c b/src/mainboard/asus/p2b_ds/mptable.c new file mode 100644 index 0000000..ee3c20e --- /dev/null +++ b/src/mainboard/asus/p2b_ds/mptable.c @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + int ioapic_id, ioapic_ver, isa_bus; + struct mp_config_table *mc; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + ioapic_id = 2; + ioapic_ver = 0x11; /* External Intel 82093AA IOAPIC. */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); + + /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x13, ioapic_id, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, 0x0, 0x18, ioapic_id, 0x13); + + /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, 0x1); + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/asus/p2b_ds/romstage.c b/src/mainboard/asus/p2b_ds/romstage.c new file mode 100644 index 0000000..494a3f0 --- /dev/null +++ b/src/mainboard/asus/p2b_ds/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/p2b_f/Kconfig b/src/mainboard/asus/p2b_f/Kconfig new file mode 100644 index 0000000..baaa040 --- /dev/null +++ b/src/mainboard/asus/p2b_f/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_P2B_F + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default asus/p2b_f + +config MAINBOARD_PART_NUMBER + string + default "P2B-F" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_ASUS_P2B_F diff --git a/src/mainboard/asus/p2b_f/board_info.txt b/src/mainboard/asus/p2b_f/board_info.txt new file mode 100644 index 0000000..7176770 --- /dev/null +++ b/src/mainboard/asus/p2b_f/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-f/ +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/p2b_f/devicetree.cb b/src/mainboard/asus/p2b_f/devicetree.cb new file mode 100644 index 0000000..5bee5ae --- /dev/null +++ b/src/mainboard/asus/p2b_f/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/asus/p2b_f/irq_tables.c b/src/mainboard/asus/p2b_f/irq_tables.c new file mode 100644 index 0000000..a66761f --- /dev/null +++ b/src/mainboard/asus/p2b_f/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x04 << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf9, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0c<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x5, 0x0}, + {0x00,(0x04<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/p2b_f/romstage.c b/src/mainboard/asus/p2b_f/romstage.c new file mode 100644 index 0000000..1b905e4 --- /dev/null +++ b/src/mainboard/asus/p2b_f/romstage.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +/* FIXME: The ASUS P2B-F has a Winbond W83977EF, actually. */ +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +/* FIXME: The ASUS P2B-F has a Winbond W83977EF, actually. */ +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/p2b_ls/Kconfig b/src/mainboard/asus/p2b_ls/Kconfig new file mode 100644 index 0000000..198404f --- /dev/null +++ b/src/mainboard/asus/p2b_ls/Kconfig @@ -0,0 +1,44 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Keith Hui buurin@gmail.com +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_P2B_LS + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + select SDRAMPWR_4DIMM + +config MAINBOARD_DIR + string + default asus/p2b_ls + +config MAINBOARD_PART_NUMBER + string + default "P2B-LS" + +config IRQ_SLOT_COUNT + int + default 8 + +endif # BOARD_ASUS_P2B_LS diff --git a/src/mainboard/asus/p2b_ls/board_info.txt b/src/mainboard/asus/p2b_ls/board_info.txt new file mode 100644 index 0000000..6a957c3 --- /dev/null +++ b/src/mainboard/asus/p2b_ls/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ls/ +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/p2b_ls/devicetree.cb b/src/mainboard/asus/p2b_ls/devicetree.cb new file mode 100644 index 0000000..9a785da --- /dev/null +++ b/src/mainboard/asus/p2b_ls/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + device pci 6.0 on end # Onboard SCSI + device pci 7.0 on end # Onboard LAN + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/asus/p2b_ls/irq_tables.c b/src/mainboard/asus/p2b_ls/irq_tables.c new file mode 100644 index 0000000..e5ff319 --- /dev/null +++ b/src/mainboard/asus/p2b_ls/irq_tables.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Keith Hui buurin@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x04 << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x10, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0c << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x1, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}}, 0x2, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x3, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x4, 0x0}, + {0x00, (0x04 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x06 << 3) | 0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}}, 0x0, 0x0}, + {0x00, (0x07 << 3) | 0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/p2b_ls/romstage.c b/src/mainboard/asus/p2b_ls/romstage.c new file mode 100644 index 0000000..09b9a4e --- /dev/null +++ b/src/mainboard/asus/p2b_ls/romstage.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +/* FIXME: The ASUS P2B-LS has a Winbond W83977EF, actually. */ +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/asus/p3b-f/Kconfig b/src/mainboard/asus/p3b-f/Kconfig deleted file mode 100644 index 07cd91f..0000000 --- a/src/mainboard/asus/p3b-f/Kconfig +++ /dev/null @@ -1,44 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ASUS_P3B_F - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select SDRAMPWR_4DIMM - -config MAINBOARD_DIR - string - default asus/p3b-f - -config MAINBOARD_PART_NUMBER - string - default "P3B-F" - -config IRQ_SLOT_COUNT - int - default 8 - -endif # BOARD_ASUS_P3B_F diff --git a/src/mainboard/asus/p3b-f/board_info.txt b/src/mainboard/asus/p3b-f/board_info.txt deleted file mode 100644 index d6ded16..0000000 --- a/src/mainboard/asus/p3b-f/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/ -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/asus/p3b-f/devicetree.cb b/src/mainboard/asus/p3b-f/devicetree.cb deleted file mode 100644 index 5bee5ae..0000000 --- a/src/mainboard/asus/p3b-f/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 4.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 4.1 on end # IDE - device pci 4.2 on end # USB - device pci 4.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/asus/p3b-f/irq_tables.c b/src/mainboard/asus/p3b-f/irq_tables.c deleted file mode 100644 index 6a5f0c9..0000000 --- a/src/mainboard/asus/p3b-f/irq_tables.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x04 << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x95, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0c<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x5, 0x0}, - {0x00,(0x0e<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x6, 0x0}, - {0x00,(0x04<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/asus/p3b-f/romstage.c b/src/mainboard/asus/p3b-f/romstage.c deleted file mode 100644 index 78c7629..0000000 --- a/src/mainboard/asus/p3b-f/romstage.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */ -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */ -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -/* - * ASUS P3B-F specific SPD enable magic. - * - * Setting the byte at offset 0x37 in the PM I/O space to 0x6f will make the - * board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD - * offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which - * will make RAM init fail. - * - * Tested values for PM I/O offset 0x37: - * 0x67: 11 00 111: Only SMBus/I2C offsets 0x48/0x49/0x2d accessible - * 0x6f: 11 01 111: Only SMBus/I2C offsets 0x50-0x53 (SPD) accessible - * 0x77: 11 10 111: Only SMBus/I2C offset 0x69 accessible - * - * PM I/O space offset 0x37 is GPOREG[31:24], i.e. it controls the GPIOs - * 24-30 of the PIIX4E (bit 31 is reserved). Thus, GPIOs 27 and 28 - * control which SMBus/I2C offsets can be accessed. - */ -static void enable_spd(void) -{ - outb(0x6f, PM_IO_BASE + 0x37); -} - -/* - * Disable SPD access after RAM init to allow access to SMBus/I2C offsets - * 0x48/0x49/0x2d, which is required e.g. by lm-sensors. - */ -static void disable_spd(void) -{ - outb(0x67, PM_IO_BASE + 0x37); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - enable_pm(); - - enable_spd(); - - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); - - disable_spd(); -} diff --git a/src/mainboard/asus/p3b_f/Kconfig b/src/mainboard/asus/p3b_f/Kconfig new file mode 100644 index 0000000..fc8d716 --- /dev/null +++ b/src/mainboard/asus/p3b_f/Kconfig @@ -0,0 +1,44 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ASUS_P3B_F + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + select SDRAMPWR_4DIMM + +config MAINBOARD_DIR + string + default asus/p3b_f + +config MAINBOARD_PART_NUMBER + string + default "P3B-F" + +config IRQ_SLOT_COUNT + int + default 8 + +endif # BOARD_ASUS_P3B_F diff --git a/src/mainboard/asus/p3b_f/board_info.txt b/src/mainboard/asus/p3b_f/board_info.txt new file mode 100644 index 0000000..d6ded16 --- /dev/null +++ b/src/mainboard/asus/p3b_f/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/ +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/asus/p3b_f/devicetree.cb b/src/mainboard/asus/p3b_f/devicetree.cb new file mode 100644 index 0000000..5bee5ae --- /dev/null +++ b/src/mainboard/asus/p3b_f/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/asus/p3b_f/irq_tables.c b/src/mainboard/asus/p3b_f/irq_tables.c new file mode 100644 index 0000000..6a5f0c9 --- /dev/null +++ b/src/mainboard/asus/p3b_f/irq_tables.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x04 << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x95, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0c<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x1, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x01eb8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x3, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x4, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x01eb8}}, 0x5, 0x0}, + {0x00,(0x0e<<3)|0x0, {{0x62, 0x1eb8}, {0x63, 0x1eb8}, {0x60, 0x1eb8}, {0x61, 0x01eb8}}, 0x6, 0x0}, + {0x00,(0x04<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0x1eb8}, {0x61, 0x1eb8}, {0x62, 0x1eb8}, {0x63, 0x01eb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/asus/p3b_f/romstage.c b/src/mainboard/asus/p3b_f/romstage.c new file mode 100644 index 0000000..78c7629 --- /dev/null +++ b/src/mainboard/asus/p3b_f/romstage.c @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */ +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */ +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +/* + * ASUS P3B-F specific SPD enable magic. + * + * Setting the byte at offset 0x37 in the PM I/O space to 0x6f will make the + * board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD + * offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which + * will make RAM init fail. + * + * Tested values for PM I/O offset 0x37: + * 0x67: 11 00 111: Only SMBus/I2C offsets 0x48/0x49/0x2d accessible + * 0x6f: 11 01 111: Only SMBus/I2C offsets 0x50-0x53 (SPD) accessible + * 0x77: 11 10 111: Only SMBus/I2C offset 0x69 accessible + * + * PM I/O space offset 0x37 is GPOREG[31:24], i.e. it controls the GPIOs + * 24-30 of the PIIX4E (bit 31 is reserved). Thus, GPIOs 27 and 28 + * control which SMBus/I2C offsets can be accessed. + */ +static void enable_spd(void) +{ + outb(0x6f, PM_IO_BASE + 0x37); +} + +/* + * Disable SPD access after RAM init to allow access to SMBus/I2C offsets + * 0x48/0x49/0x2d, which is required e.g. by lm-sensors. + */ +static void disable_spd(void) +{ + outb(0x67, PM_IO_BASE + 0x37); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + enable_pm(); + + enable_spd(); + + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + + disable_spd(); +} diff --git a/src/mainboard/avalue/Kconfig b/src/mainboard/avalue/Kconfig index 72ed2bb..fb3f671 100644 --- a/src/mainboard/avalue/Kconfig +++ b/src/mainboard/avalue/Kconfig @@ -26,7 +26,7 @@ config BOARD_AVALUE_EAX_785E
endchoice
-source "src/mainboard/avalue/eax-785e/Kconfig" +source "src/mainboard/avalue/eax_785e/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/avalue/eax-785e/Kconfig b/src/mainboard/avalue/eax-785e/Kconfig deleted file mode 100644 index 32b2aff..0000000 --- a/src/mainboard/avalue/eax-785e/Kconfig +++ /dev/null @@ -1,92 +0,0 @@ -if BOARD_AVALUE_EAX_785E - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR3 - select DIMM_REGISTERED - select QRANK_DIMM_SUPPORT - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_WINBOND_W83627HF #COM1, COM2 - #select SUPERIO_FINTEK_F81216AD #COM3, COM4 - select SB_SUPERIO_HWM - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - select ENABLE_APIC_EXT_ID - select GFXUMA - select HAVE_DEBUG_CAR - select SET_FIDVID - -config MAINBOARD_DIR - string - default avalue/eax-785e - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "EAX-785E" - -config HW_MEM_HOLE_SIZEK - hex - default 0x100000 - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config VGA_BIOS_ID - string - default "1002,9712" - -endif #BOARD_AVALUE_EAX_785E diff --git a/src/mainboard/avalue/eax-785e/Makefile.inc b/src/mainboard/avalue/eax-785e/Makefile.inc deleted file mode 100644 index 0bbc26f..0000000 --- a/src/mainboard/avalue/eax-785e/Makefile.inc +++ /dev/null @@ -1,15 +0,0 @@ - -#SB800 CIMx share AGESA V5 lib code -ifneq ($(CONFIG_CPU_AMD_AGESA),y) - AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 - romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c - - AGESA_INC := -I$(AGESA_ROOT)/ \ - -I$(AGESA_ROOT)/Include \ - -I$(AGESA_ROOT)/Proc/IDS/ \ - -I$(AGESA_ROOT)/Proc/CPU/ \ - -I$(AGESA_ROOT)/Proc/CPU/Family - - CFLAGS_common += $(AGESA_INC) -endif diff --git a/src/mainboard/avalue/eax-785e/acpi/cpstate.asl b/src/mainboard/avalue/eax-785e/acpi/cpstate.asl deleted file mode 100644 index f2a0d62..0000000 --- a/src/mainboard/avalue/eax-785e/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/avalue/eax-785e/acpi/routing.asl b/src/mainboard/avalue/eax-785e/acpi/routing.asl deleted file mode 100644 index 87a79f9..0000000 --- a/src/mainboard/avalue/eax-785e/acpi/routing.asl +++ /dev/null @@ -1,398 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/avalue/eax-785e/acpi/sata.asl b/src/mainboard/avalue/eax-785e/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/avalue/eax-785e/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/avalue/eax-785e/acpi/usb.asl b/src/mainboard/avalue/eax-785e/acpi/usb.asl deleted file mode 100644 index 48905a9..0000000 --- a/src/mainboard/avalue/eax-785e/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/avalue/eax-785e/acpi_tables.c b/src/mainboard/avalue/eax-785e/acpi_tables.c deleted file mode 100644 index 3f9bd60..0000000 --- a/src/mainboard/avalue/eax-785e/acpi_tables.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/avalue/eax-785e/board_info.txt b/src/mainboard/avalue/eax-785e/board_info.txt deleted file mode 100644 index bf7e28a..0000000 --- a/src/mainboard/avalue/eax-785e/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: http://www.avalue.com.tw/en/product/detail.aspx?ccid=2&cid=9&id=68&a... -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n diff --git a/src/mainboard/avalue/eax-785e/cmos.layout b/src/mainboard/avalue/eax-785e/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/avalue/eax-785e/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/avalue/eax-785e/devicetree.cb b/src/mainboard/avalue/eax-785e/devicetree.cb deleted file mode 100644 index 42ddf01..0000000 --- a/src/mainboard/avalue/eax-785e/devicetree.cb +++ /dev/null @@ -1,111 +0,0 @@ -# sample config for avalue/EAX-785E -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR3 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 - device pci 2.0 on end # GFX_RX0-7/TX0-7 PCIEx16_1 slot - device pci 3.0 on end # GFX_RX8-15/TX8-15 PCIEx16_2 slot - device pci 4.0 on end # PortB GPP_RX/TX0 PCIEx1_1 slot - device pci 5.0 on end # PortC GPP_RX/TX1 PCIEx1_2 slot - device pci 6.0 on end # PortD GPP_RX/TX2 PCIEx1_3 slot - device pci 7.0 on end # PortE GPP_RX/TX3 PCIEx1_4 slot - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # Ethernet - device pci a.0 on end # Ethernet - register "gppsb_configuration" = "4" # Configuration E - register "gpp_configuration" = "3" # Configuration D - register "port_enable" = "0x6FE" - register "gfx_dev2_dev3" = "0" #no use - register "gfx_dual_slot" = "1" # 0 single slot, 1 dual slot - register "gfx_lane_reversal" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - register "gfx_tmds" = "1" - register "gfx_pcie_config" = "4" # 2x8 GFX, one on Lanes 0-7, one on Lanes 8-15 - register "gfx_ddi_config" = "0" # no DDI_SL - end - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 Keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end #superio/winbond/w83627hf - end # LPC 0x439d - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # USB 2 - device pci 14.6 off end # Gec - device pci 15.0 off end # PCIe 0 - device pci 15.1 off end # PCIe 1 - device pci 15.2 off end # PCIe 2 - device pci 15.3 on end # PCIe 3 - device pci 16.0 on end # USB - device pci 16.2 on end # USB - #register "gpp_configuration" = "0" #4:0:0:0 - #register "gpp_configuration" = "2" #2:2:0:0 - #register "gpp_configuration" = "3" #2:1:1:0 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #domain -end diff --git a/src/mainboard/avalue/eax-785e/dsdt.asl b/src/mainboard/avalue/eax-785e/dsdt.asl deleted file mode 100644 index a3696f3..0000000 --- a/src/mainboard/avalue/eax-785e/dsdt.asl +++ /dev/null @@ -1,1818 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AVALUE ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) -#if 0 - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0xFFFFFFFF, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000000, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c deleted file mode 100644 index f90c6b8..0000000 --- a/src/mainboard/avalue/eax-785e/get_bus_conf.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdfam10_sysconf.h> -#if CONFIG_AMD_SB_CIMX -#include <sb_cimx.h> -#endif - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -int bus_isa; -u8 bus_rs780[11]; -u8 bus_sb800[6]; -u32 apicid_sb800; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_rs780; -u32 sbdn_sb800; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb800 = 0; - - memset(bus_sb800, 0, sizeof(bus_sb800)); - - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = bus_rs780[0]; - - - /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); - if (dev) { - bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - - for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); - if (dev) { - bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - if(255 != bus_rs780[i]) { - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - } - - /* I/O APICs: APIC ID Version State Address */ - bus_isa = 10; -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb800 = apicid_base + 0; - -#if CONFIG_AMD_SB_CIMX - sb_Late_Post(); -#endif -} diff --git a/src/mainboard/avalue/eax-785e/irq_tables.c b/src/mainboard/avalue/eax-785e/irq_tables.c deleted file mode 100644 index 067b2e6..0000000 --- a/src/mainboard/avalue/eax-785e/irq_tables.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam10_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_isa; -extern u8 bus_rs780[8]; -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/avalue/eax-785e/mainboard.c b/src/mainboard/avalue/eax-785e/mainboard.c deleted file mode 100644 index 6ce3469..0000000 --- a/src/mainboard/avalue/eax-785e/mainboard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "SBPLATFORM.h" - - -u8 is_dev3_present(void); -void set_pcie_dereset(void); -void set_pcie_reset(void); -void enable_int_gfx(void); - -/* GPIO6. */ -void enable_int_gfx(void) -{ - volatile u8 *gpio_reg; - -#ifdef UNUSED_CODE - RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ - RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ -#endif - /* make sure the Acpi MMIO(fed80000) is accessible */ - RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ - - *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ - *(gpio_reg + 170) = 0x1; /* gpio_gate */ - - gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ - - *(gpio_reg + 0x6) = 0x8; - *(gpio_reg + 170) = 0x0; -} - -void set_pcie_dereset() -{ -} - -void set_pcie_reset(void) -{ -} - -u8 is_dev3_present(void) -{ - return 1; -} - - -/************************************************* -* enable the dedicated function in EAX-785E board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - set_pcie_dereset(); - enable_int_gfx(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/avalue/eax-785e/mb_sysconf.h b/src/mainboard/avalue/eax-785e/mb_sysconf.h deleted file mode 100644 index 8a693fd..0000000 --- a/src/mainboard/avalue/eax-785e/mb_sysconf.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/avalue/eax-785e/mptable.c b/src/mainboard/avalue/eax-785e/mptable.c deleted file mode 100644 index 9c25da6..0000000 --- a/src/mainboard/avalue/eax-785e/mptable.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <SBPLATFORM.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern int bus_isa; -extern u8 bus_rs780[11]; -extern u8 bus_sb800[6]; -extern u32 apicid_sb800; -extern u32 sbdn_rs780; -extern u32 sbdn_sb800; - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - u32 dword; - u8 byte; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); - dword &= 0xFFFFFFF0; - - smp_write_ioapic(mc, apicid_sb800, 0x11, dword); - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); - - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/avalue/eax-785e/platform_cfg.h b/src/mainboard/avalue/eax-785e/platform_cfg.h deleted file mode 100644 index 6944ab2..0000000 --- a/src/mainboard/avalue/eax-785e/platform_cfg.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -/** - * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address - */ -#define SIO_HWM_BASE_ADDRESS 0x290 - -#endif diff --git a/src/mainboard/avalue/eax-785e/resourcemap.c b/src/mainboard/avalue/eax-785e/resourcemap.c deleted file mode 100644 index 183883a..0000000 --- a/src/mainboard/avalue/eax-785e/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/avalue/eax-785e/romstage.c b/src/mainboard/avalue/eax-785e/romstage.c deleted file mode 100644 index 65f499b..0000000 --- a/src/mainboard/avalue/eax-785e/romstage.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <lib.h> -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include <sb_cimx.h> -#include <SBPLATFORM.h> /* SB OEM constants */ -#include <southbridge/amd/cimx/sb800/smbus.h> -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define CLK_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include "spd.h" -#include <reset.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - //enable port80 decoding and southbridge poweron init - sb_Poweron_Init(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb800_clk_output_48Mhz(); - - w83627hf_set_clksel_48(CLK_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - printk(BIOS_DEBUG, "\n"); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// ram_check(0x00200000, 0x00200000 + (640 * 1024)); -// ram_check(0x40200000, 0x40200000 + (640 * 1024)); - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - - return 0; -} diff --git a/src/mainboard/avalue/eax_785e/Kconfig b/src/mainboard/avalue/eax_785e/Kconfig new file mode 100644 index 0000000..c3d19a8 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/Kconfig @@ -0,0 +1,92 @@ +if BOARD_AVALUE_EAX_785E + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR3 + select DIMM_REGISTERED + select QRANK_DIMM_SUPPORT + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_WINBOND_W83627HF #COM1, COM2 + #select SUPERIO_FINTEK_F81216AD #COM3, COM4 + select SB_SUPERIO_HWM + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_2048 + select ENABLE_APIC_EXT_ID + select GFXUMA + select HAVE_DEBUG_CAR + select SET_FIDVID + +config MAINBOARD_DIR + string + default avalue/eax_785e + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "EAX-785E" + +config HW_MEM_HOLE_SIZEK + hex + default 0x100000 + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config VGA_BIOS_ID + string + default "1002,9712" + +endif #BOARD_AVALUE_EAX_785E diff --git a/src/mainboard/avalue/eax_785e/Makefile.inc b/src/mainboard/avalue/eax_785e/Makefile.inc new file mode 100644 index 0000000..0bbc26f --- /dev/null +++ b/src/mainboard/avalue/eax_785e/Makefile.inc @@ -0,0 +1,15 @@ + +#SB800 CIMx share AGESA V5 lib code +ifneq ($(CONFIG_CPU_AMD_AGESA),y) + AGESA_ROOT ?= src/vendorcode/amd/agesa/f14 + romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c + + AGESA_INC := -I$(AGESA_ROOT)/ \ + -I$(AGESA_ROOT)/Include \ + -I$(AGESA_ROOT)/Proc/IDS/ \ + -I$(AGESA_ROOT)/Proc/CPU/ \ + -I$(AGESA_ROOT)/Proc/CPU/Family + + CFLAGS_common += $(AGESA_INC) +endif diff --git a/src/mainboard/avalue/eax_785e/acpi/cpstate.asl b/src/mainboard/avalue/eax_785e/acpi/cpstate.asl new file mode 100644 index 0000000..f2a0d62 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/avalue/eax_785e/acpi/routing.asl b/src/mainboard/avalue/eax_785e/acpi/routing.asl new file mode 100644 index 0000000..87a79f9 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/acpi/routing.asl @@ -0,0 +1,398 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/avalue/eax_785e/acpi/sata.asl b/src/mainboard/avalue/eax_785e/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/avalue/eax_785e/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/avalue/eax_785e/acpi/usb.asl b/src/mainboard/avalue/eax_785e/acpi/usb.asl new file mode 100644 index 0000000..48905a9 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/avalue/eax_785e/acpi_tables.c b/src/mainboard/avalue/eax_785e/acpi_tables.c new file mode 100644 index 0000000..3f9bd60 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/acpi_tables.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/avalue/eax_785e/board_info.txt b/src/mainboard/avalue/eax_785e/board_info.txt new file mode 100644 index 0000000..bf7e28a --- /dev/null +++ b/src/mainboard/avalue/eax_785e/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://www.avalue.com.tw/en/product/detail.aspx?ccid=2&cid=9&id=68&a... +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/avalue/eax_785e/cmos.layout b/src/mainboard/avalue/eax_785e/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/avalue/eax_785e/devicetree.cb b/src/mainboard/avalue/eax_785e/devicetree.cb new file mode 100644 index 0000000..fa2e93f --- /dev/null +++ b/src/mainboard/avalue/eax_785e/devicetree.cb @@ -0,0 +1,111 @@ +# sample config for avalue/EAX_785E +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR3 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 + device pci 2.0 on end # GFX_RX0-7/TX0-7 PCIEx16_1 slot + device pci 3.0 on end # GFX_RX8-15/TX8-15 PCIEx16_2 slot + device pci 4.0 on end # PortB GPP_RX/TX0 PCIEx1_1 slot + device pci 5.0 on end # PortC GPP_RX/TX1 PCIEx1_2 slot + device pci 6.0 on end # PortD GPP_RX/TX2 PCIEx1_3 slot + device pci 7.0 on end # PortE GPP_RX/TX3 PCIEx1_4 slot + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # Ethernet + device pci a.0 on end # Ethernet + register "gppsb_configuration" = "4" # Configuration E + register "gpp_configuration" = "3" # Configuration D + register "port_enable" = "0x6FE" + register "gfx_dev2_dev3" = "0" #no use + register "gfx_dual_slot" = "1" # 0 single slot, 1 dual slot + register "gfx_lane_reversal" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + register "gfx_tmds" = "1" + register "gfx_pcie_config" = "4" # 2x8 GFX, one on Lanes 0-7, one on Lanes 8-15 + register "gfx_ddi_config" = "0" # no DDI_SL + end + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 Keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO_GAME_MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO_PLED + device pnp 2e.9 off end # GPIO_SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end #superio/winbond/w83627hf + end # LPC 0x439d + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # USB 2 + device pci 14.6 off end # Gec + device pci 15.0 off end # PCIe 0 + device pci 15.1 off end # PCIe 1 + device pci 15.2 off end # PCIe 2 + device pci 15.3 on end # PCIe 3 + device pci 16.0 on end # USB + device pci 16.2 on end # USB + #register "gpp_configuration" = "0" #4:0:0:0 + #register "gpp_configuration" = "2" #2:2:0:0 + #register "gpp_configuration" = "3" #2:1:1:0 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 + end # device pci 18.0 + + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end #domain +end diff --git a/src/mainboard/avalue/eax_785e/dsdt.asl b/src/mainboard/avalue/eax_785e/dsdt.asl new file mode 100644 index 0000000..a3696f3 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/dsdt.asl @@ -0,0 +1,1818 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AVALUE ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PIRA) + Store(0, PIRB) + Store(0, PIRC) + Store(0, PIRD) + Store(0, PIRE) + Store(0, PIRF) + Store(0, PIRG) + Store(0, PIRH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PIRA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PIRB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PIRC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIRD) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PIRE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PIRF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PIRG) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PIRH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x00, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x00, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x00, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x00, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) +#if 0 + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ +#if 0 + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +#endif +} +/* End of ASL file */ diff --git a/src/mainboard/avalue/eax_785e/get_bus_conf.c b/src/mainboard/avalue/eax_785e/get_bus_conf.c new file mode 100644 index 0000000..f90c6b8 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/get_bus_conf.c @@ -0,0 +1,141 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdfam10_sysconf.h> +#if CONFIG_AMD_SB_CIMX +#include <sb_cimx.h> +#endif + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +int bus_isa; +u8 bus_rs780[11]; +u8 bus_sb800[6]; +u32 apicid_sb800; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + + +u32 sbdn_rs780; +u32 sbdn_sb800; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb800 = 0; + + memset(bus_sb800, 0, sizeof(bus_sb800)); + + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb800[0] = bus_rs780[0]; + + + /* sb800 */ + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + if (dev) { + bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i)); + if (dev) { + bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + if(255 != bus_rs780[i]) { + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + } + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb800 = apicid_base + 0; + +#if CONFIG_AMD_SB_CIMX + sb_Late_Post(); +#endif +} diff --git a/src/mainboard/avalue/eax_785e/irq_tables.c b/src/mainboard/avalue/eax_785e/irq_tables.c new file mode 100644 index 0000000..067b2e6 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/irq_tables.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam10_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern u8 bus_isa; +extern u8 bus_rs780[8]; +extern u8 bus_sb800[6]; +extern unsigned long sbdn_sb800; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb800[0]; + pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/avalue/eax_785e/mainboard.c b/src/mainboard/avalue/eax_785e/mainboard.c new file mode 100644 index 0000000..6ce3469 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/mainboard.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "SBPLATFORM.h" + + +u8 is_dev3_present(void); +void set_pcie_dereset(void); +void set_pcie_reset(void); +void enable_int_gfx(void); + +/* GPIO6. */ +void enable_int_gfx(void) +{ + volatile u8 *gpio_reg; + +#ifdef UNUSED_CODE + RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ + RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ +#endif + /* make sure the Acpi MMIO(fed80000) is accessible */ + RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ + + *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ + *(gpio_reg + 170) = 0x1; /* gpio_gate */ + + gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ + + *(gpio_reg + 0x6) = 0x8; + *(gpio_reg + 170) = 0x0; +} + +void set_pcie_dereset() +{ +} + +void set_pcie_reset(void) +{ +} + +u8 is_dev3_present(void) +{ + return 1; +} + + +/************************************************* +* enable the dedicated function in EAX-785E board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + set_pcie_dereset(); + enable_int_gfx(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/avalue/eax_785e/mb_sysconf.h b/src/mainboard/avalue/eax_785e/mb_sysconf.h new file mode 100644 index 0000000..8a693fd --- /dev/null +++ b/src/mainboard/avalue/eax_785e/mb_sysconf.h @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/avalue/eax_785e/mptable.c b/src/mainboard/avalue/eax_785e/mptable.c new file mode 100644 index 0000000..9c25da6 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/mptable.c @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <SBPLATFORM.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern int bus_isa; +extern u8 bus_rs780[11]; +extern u8 bus_sb800[6]; +extern u32 apicid_sb800; +extern u32 sbdn_rs780; +extern u32 sbdn_sb800; + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + u32 dword; + u8 byte; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword); + dword &= 0xFFFFFFF0; + + smp_write_ioapic(mc, apicid_sb800, 0x11, dword); + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0); + + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/avalue/eax_785e/platform_cfg.h b/src/mainboard/avalue/eax_785e/platform_cfg.h new file mode 100644 index 0000000..6944ab2 --- /dev/null +++ b/src/mainboard/avalue/eax_785e/platform_cfg.h @@ -0,0 +1,219 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +/** + * @def SIO_HWM_BASE_ADDRESS Super IO HWM base address + */ +#define SIO_HWM_BASE_ADDRESS 0x290 + +#endif diff --git a/src/mainboard/avalue/eax_785e/resourcemap.c b/src/mainboard/avalue/eax_785e/resourcemap.c new file mode 100644 index 0000000..183883a --- /dev/null +++ b/src/mainboard/avalue/eax_785e/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/avalue/eax_785e/romstage.c b/src/mainboard/avalue/eax_785e/romstage.c new file mode 100644 index 0000000..65f499b --- /dev/null +++ b/src/mainboard/avalue/eax_785e/romstage.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <lib.h> +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include <sb_cimx.h> +#include <SBPLATFORM.h> /* SB OEM constants */ +#include <southbridge/amd/cimx/sb800/smbus.h> +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define CLK_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include "spd.h" +#include <reset.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + //enable port80 decoding and southbridge poweron init + sb_Poweron_Init(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb800_clk_output_48Mhz(); + + w83627hf_set_clksel_48(CLK_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + printk(BIOS_DEBUG, "\n"); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// ram_check(0x00200000, 0x00200000 + (640 * 1024)); +// ram_check(0x40200000, 0x40200000 + (640 * 1024)); + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + + return 0; +} diff --git a/src/mainboard/azza/Kconfig b/src/mainboard/azza/Kconfig index b6488cd..a504c62 100644 --- a/src/mainboard/azza/Kconfig +++ b/src/mainboard/azza/Kconfig @@ -26,7 +26,7 @@ config BOARD_AZZA_PT_6IBD
endchoice
-source "src/mainboard/azza/pt-6ibd/Kconfig" +source "src/mainboard/azza/pt_6ibd/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/azza/pt-6ibd/Kconfig b/src/mainboard/azza/pt-6ibd/Kconfig deleted file mode 100644 index 8897102..0000000 --- a/src/mainboard/azza/pt-6ibd/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_AZZA_PT_6IBD - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default azza/pt-6ibd - -config MAINBOARD_PART_NUMBER - string - default "PT-6IBD" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_AZZA_PT_6IBD diff --git a/src/mainboard/azza/pt-6ibd/board_info.txt b/src/mainboard/azza/pt-6ibd/board_info.txt deleted file mode 100644 index 3a7ef4f..0000000 --- a/src/mainboard/azza/pt-6ibd/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: desktop -Board URL: http://web.tiscali.it/acorp/?http://web.archive.org/web/20050426181911/http:... -ROM package: DIP32 -ROM protocol: Parallel diff --git a/src/mainboard/azza/pt-6ibd/devicetree.cb b/src/mainboard/azza/pt-6ibd/devicetree.cb deleted file mode 100644 index a2f5513..0000000 --- a/src/mainboard/azza/pt-6ibd/devicetree.cb +++ /dev/null @@ -1,59 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.6 on # Consumer IR - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/azza/pt-6ibd/irq_tables.c b/src/mainboard/azza/pt-6ibd/irq_tables.c deleted file mode 100644 index d99b230..0000000 --- a/src/mainboard/azza/pt-6ibd/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x3c, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x09<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, - {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/azza/pt-6ibd/romstage.c b/src/mainboard/azza/pt-6ibd/romstage.c deleted file mode 100644 index b31be70..0000000 --- a/src/mainboard/azza/pt-6ibd/romstage.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -/* FIXME: It's a Winbond W83977EF, actually. */ -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -/* FIXME: It's a Winbond W83977EF, actually. */ -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/azza/pt_6ibd/Kconfig b/src/mainboard/azza/pt_6ibd/Kconfig new file mode 100644 index 0000000..730d3c3 --- /dev/null +++ b/src/mainboard/azza/pt_6ibd/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_AZZA_PT_6IBD + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default azza/pt_6ibd + +config MAINBOARD_PART_NUMBER + string + default "PT-6IBD" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_AZZA_PT_6IBD diff --git a/src/mainboard/azza/pt_6ibd/board_info.txt b/src/mainboard/azza/pt_6ibd/board_info.txt new file mode 100644 index 0000000..3a7ef4f --- /dev/null +++ b/src/mainboard/azza/pt_6ibd/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +Board URL: http://web.tiscali.it/acorp/?http://web.archive.org/web/20050426181911/http:... +ROM package: DIP32 +ROM protocol: Parallel diff --git a/src/mainboard/azza/pt_6ibd/devicetree.cb b/src/mainboard/azza/pt_6ibd/devicetree.cb new file mode 100644 index 0000000..a2f5513 --- /dev/null +++ b/src/mainboard/azza/pt_6ibd/devicetree.cb @@ -0,0 +1,59 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!) + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.6 on # Consumer IR + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/azza/pt_6ibd/irq_tables.c b/src/mainboard/azza/pt_6ibd/irq_tables.c new file mode 100644 index 0000000..d99b230 --- /dev/null +++ b/src/mainboard/azza/pt_6ibd/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x3c, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x09<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0x0deb8}}, 0x5, 0x0}, + {0x00,(0x07<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/azza/pt_6ibd/romstage.c b/src/mainboard/azza/pt_6ibd/romstage.c new file mode 100644 index 0000000..b31be70 --- /dev/null +++ b/src/mainboard/azza/pt_6ibd/romstage.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +/* FIXME: It's a Winbond W83977EF, actually. */ +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +/* FIXME: It's a Winbond W83977EF, actually. */ +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/bcom/Kconfig b/src/mainboard/bcom/Kconfig index 60945d6..cc94e13 100644 --- a/src/mainboard/bcom/Kconfig +++ b/src/mainboard/bcom/Kconfig @@ -23,13 +23,13 @@ choice
config BOARD_BCOM_WINNET100 bool "WinNET100" -config BOARD_BCOM_WINNETP680 +config BOARD_BCOM_WINNET_P680 bool "WinNET P680"
endchoice
source "src/mainboard/bcom/winnet100/Kconfig" -source "src/mainboard/bcom/winnetp680/Kconfig" +source "src/mainboard/bcom/winnet_p680/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/bcom/winnet_p680/Kconfig b/src/mainboard/bcom/winnet_p680/Kconfig new file mode 100644 index 0000000..a21f039 --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/Kconfig @@ -0,0 +1,26 @@ +if BOARD_BCOM_WINNET_P680 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_C7 + select NORTHBRIDGE_VIA_CN700 + select SOUTHBRIDGE_VIA_VT8237R + select SUPERIO_WINBOND_W83697HF + select HAVE_PIRQ_TABLE + select HAVE_OPTION_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default bcom/winnet_p680 + +config MAINBOARD_PART_NUMBER + string + default "WinNET P680" + +config IRQ_SLOT_COUNT + int + default 10 + +endif # BOARD_BCOM_WINNET_P680 diff --git a/src/mainboard/bcom/winnet_p680/board_info.txt b/src/mainboard/bcom/winnet_p680/board_info.txt new file mode 100644 index 0000000..0ba2657 --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/board_info.txt @@ -0,0 +1 @@ +Category: settop diff --git a/src/mainboard/bcom/winnet_p680/cmos.layout b/src/mainboard/bcom/winnet_p680/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/bcom/winnet_p680/devicetree.cb b/src/mainboard/bcom/winnet_p680/devicetree.cb new file mode 100644 index 0000000..f0a086b --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/devicetree.cb @@ -0,0 +1,64 @@ +chip northbridge/via/cn700 # Northbridge + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci f.0 on end # IDE + device pci 10.0 on end # UHCI + device pci 10.1 on end # UHCI + device pci 10.2 on end # UHCI + device pci 10.3 on end # UHCI + device pci 10.4 on end # EHCI + device pci 11.0 on # Southbridge LPC + chip superio/winbond/w83697hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 off end # Consumer IR + device pnp 2e.7 off end # Game port, GPIO 1 + device pnp 2e.8 off end # MIDI port, GPIO 5 + device pnp 2e.9 off end # GPIO 2-4 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HWM + io 0x60 = 0x290 + end + end + end + device pci 11.5 on end # AC'97 audio + device pci 12.0 on end # Ethernet + end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end +end diff --git a/src/mainboard/bcom/winnet_p680/irq_tables.c b/src/mainboard/bcom/winnet_p680/irq_tables.c new file mode 100644 index 0000000..888cf48 --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/irq_tables.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x11 << 3) | 0x0, /* Interrupt router device */ + 0x828, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x596, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x3e, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x1, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0x0def8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x3, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0x0def8}}, 0x4, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x5, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/bcom/winnet_p680/romstage.c b/src/mainboard/bcom/winnet_p680/romstage.c new file mode 100644 index 0000000..898ad1a --- /dev/null +++ b/src/mainboard/bcom/winnet_p680/romstage.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "northbridge/via/cn700/raminit.h" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include <lib.h> +#include <spd.h> +#include "southbridge/via/vt8237r/early_smbus.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83697hf/w83697hf.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/via/cn700/raminit.c" + +static void enable_mainboard_devices(void) +{ + device_t dev; + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Southbridge not found!!!\n"); + + /* bit=0 means enable function (per CX700 datasheet) + * 5 16.1 USB 2 + * 4 16.0 USB 1 + * 3 15.0 SATA and PATA + * 2 16.2 USB 3 + * 1 16.4 USB EHCI + */ + pci_write_config8(dev, 0x50, 0x80); + + /* bit=1 means enable internal function (per CX700 datasheet) + * 3 Internal RTC + * 2 Internal PS2 Mouse + * 1 Internal KBC Configuration + * 0 Internal Keyboard Controller + */ + pci_write_config8(dev, 0x51, 0x1d); +} + +static const struct mem_controller ctrl = { + .d0f0 = 0x0000, + .d0f2 = 0x2000, + .d0f3 = 0x3000, + .d0f4 = 0x4000, + .d0f7 = 0x7000, + .d1f0 = 0x8000, + .channel0 = { DIMM0 }, +}; + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + /* Enable multifunction for northbridge. */ + pci_write_config8(ctrl.d0f0, 0x4f, 0x01); + + w83697hf_set_clksel_48(SERIAL_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + enable_smbus(); + smbus_fixup(&ctrl); + + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + enable_mainboard_devices(); + + ddr_ram_setup(&ctrl); +} diff --git a/src/mainboard/bcom/winnetp680/Kconfig b/src/mainboard/bcom/winnetp680/Kconfig deleted file mode 100644 index f6a80af..0000000 --- a/src/mainboard/bcom/winnetp680/Kconfig +++ /dev/null @@ -1,26 +0,0 @@ -if BOARD_BCOM_WINNETP680 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C7 - select NORTHBRIDGE_VIA_CN700 - select SOUTHBRIDGE_VIA_VT8237R - select SUPERIO_WINBOND_W83697HF - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default bcom/winnetp680 - -config MAINBOARD_PART_NUMBER - string - default "WinNET P680" - -config IRQ_SLOT_COUNT - int - default 10 - -endif # BOARD_BCOM_WINNETP680 diff --git a/src/mainboard/bcom/winnetp680/board_info.txt b/src/mainboard/bcom/winnetp680/board_info.txt deleted file mode 100644 index 0ba2657..0000000 --- a/src/mainboard/bcom/winnetp680/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: settop diff --git a/src/mainboard/bcom/winnetp680/cmos.layout b/src/mainboard/bcom/winnetp680/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/bcom/winnetp680/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/bcom/winnetp680/devicetree.cb b/src/mainboard/bcom/winnetp680/devicetree.cb deleted file mode 100644 index f0a086b..0000000 --- a/src/mainboard/bcom/winnetp680/devicetree.cb +++ /dev/null @@ -1,64 +0,0 @@ -chip northbridge/via/cn700 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - register "fn_ctrl_lo" = "0x80" - register "fn_ctrl_hi" = "0x1d" - device pci f.0 on end # IDE - device pci 10.0 on end # UHCI - device pci 10.1 on end # UHCI - device pci 10.2 on end # UHCI - device pci 10.3 on end # UHCI - device pci 10.4 on end # EHCI - device pci 11.0 on # Southbridge LPC - chip superio/winbond/w83697hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 off end # Consumer IR - device pnp 2e.7 off end # Game port, GPIO 1 - device pnp 2e.8 off end # MIDI port, GPIO 5 - device pnp 2e.9 off end # GPIO 2-4 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HWM - io 0x60 = 0x290 - end - end - end - device pci 11.5 on end # AC'97 audio - device pci 12.0 on end # Ethernet - end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end -end diff --git a/src/mainboard/bcom/winnetp680/irq_tables.c b/src/mainboard/bcom/winnetp680/irq_tables.c deleted file mode 100644 index 888cf48..0000000 --- a/src/mainboard/bcom/winnetp680/irq_tables.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 VIA Technologies, Inc. - * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x11 << 3) | 0x0, /* Interrupt router device */ - 0x828, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x596, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x3e, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x1, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0x0def8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x3, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0x0def8}}, 0x4, 0x0}, - {0x00,(0x0c<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x5, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/bcom/winnetp680/romstage.c b/src/mainboard/bcom/winnetp680/romstage.c deleted file mode 100644 index 898ad1a..0000000 --- a/src/mainboard/bcom/winnetp680/romstage.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 VIA Technologies, Inc. - * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/via/cn700/raminit.h" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include <lib.h> -#include <spd.h> -#include "southbridge/via/vt8237r/early_smbus.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83697hf/w83697hf.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/via/cn700/raminit.c" - -static void enable_mainboard_devices(void) -{ - device_t dev; - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); - if (dev == PCI_DEV_INVALID) - die("Southbridge not found!!!\n"); - - /* bit=0 means enable function (per CX700 datasheet) - * 5 16.1 USB 2 - * 4 16.0 USB 1 - * 3 15.0 SATA and PATA - * 2 16.2 USB 3 - * 1 16.4 USB EHCI - */ - pci_write_config8(dev, 0x50, 0x80); - - /* bit=1 means enable internal function (per CX700 datasheet) - * 3 Internal RTC - * 2 Internal PS2 Mouse - * 1 Internal KBC Configuration - * 0 Internal Keyboard Controller - */ - pci_write_config8(dev, 0x51, 0x1d); -} - -static const struct mem_controller ctrl = { - .d0f0 = 0x0000, - .d0f2 = 0x2000, - .d0f3 = 0x3000, - .d0f4 = 0x4000, - .d0f7 = 0x7000, - .d1f0 = 0x8000, - .channel0 = { DIMM0 }, -}; - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - /* Enable multifunction for northbridge. */ - pci_write_config8(ctrl.d0f0, 0x4f, 0x01); - - w83697hf_set_clksel_48(SERIAL_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - enable_smbus(); - smbus_fixup(&ctrl); - - /* Halt if there was a built-in self test failure. */ - report_bist_failure(bist); - - enable_mainboard_devices(); - - ddr_ram_setup(&ctrl); -} diff --git a/src/mainboard/cubietech/Kconfig b/src/mainboard/cubietech/Kconfig index 840ee85..174099f 100644 --- a/src/mainboard/cubietech/Kconfig +++ b/src/mainboard/cubietech/Kconfig @@ -4,12 +4,12 @@ if VENDOR_CUBIETECH choice prompt "Mainboard model"
-config BOARD_CUBIETECH_CUBIEBOARD +config BOARD_CUBIETECH_CUBIEBOARD_A10 bool "Cubieboard"
endchoice
-source "src/mainboard/cubietech/cubieboard/Kconfig" +source "src/mainboard/cubietech/cubieboard_a10/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/cubietech/cubieboard/Kconfig b/src/mainboard/cubietech/cubieboard/Kconfig deleted file mode 100644 index c127329..0000000 --- a/src/mainboard/cubietech/cubieboard/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -if BOARD_CUBIETECH_CUBIEBOARD - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_ALLWINNER_A10 - select BOARD_ROMSIZE_KB_4096 - select DRIVER_XPOWERS_AXP209 - -config MAINBOARD_DIR - string - default cubietech/cubieboard - -config MAINBOARD_PART_NUMBER - string - default "Cubieboard A10" - -config MAX_CPUS - int - default 1 - -config BOOTBLOCK_MAINBOARD_INIT - string - default "mainboard/cubietech/cubieboard/bootblock.c" - -config DRAM_SIZE_MB - int - default 1024 - -config UART_FOR_CONSOLE - int - default 0 - -endif # BOARD_CUBIETECH_CUBIEBOARD diff --git a/src/mainboard/cubietech/cubieboard/Makefile.inc b/src/mainboard/cubietech/cubieboard/Makefile.inc deleted file mode 100644 index 29763fb..0000000 --- a/src/mainboard/cubietech/cubieboard/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -romstage-y += romstage.c diff --git a/src/mainboard/cubietech/cubieboard/board_info.txt b/src/mainboard/cubietech/cubieboard/board_info.txt deleted file mode 100644 index 14a3755..0000000 --- a/src/mainboard/cubietech/cubieboard/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: sbc - diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c deleted file mode 100644 index 9f6db93..0000000 --- a/src/mainboard/cubietech/cubieboard/bootblock.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Minimal bootblock for Cubieboard - * It sets up CPU clock, and enables the bootblock console. - * - * Copyright (C) 2013 Alexandru Gagniuc mr.nuke.me@gmail.com - * Subject to the GNU GPL v2, or (at your option) any later version. - */ - -#include <arch/io.h> -#include <console/uart.h> -#include <console/console.h> -#include <delay.h> -#include <cpu/allwinner/a10/gpio.h> -#include <cpu/allwinner/a10/clock.h> -#include <cpu/allwinner/a10/dramc.h> - -#define CPU_AHB_APB0_DEFAULT \ - CPU_CLK_SRC_OSC24M \ - | APB0_DIV_1 \ - | AHB_DIV_2 \ - | AXI_DIV_1 - -#define GPH_STATUS_LEDS (1 << 20) | (1 << 21) -#define GPH_LED1_PIN_NO 21 -#define GPH_LED2_PIN_NO 20 - -#define GPB_UART0_FUNC 2 -#define GPB_UART0_PINS ((1 << 22) | (1 << 23)) - -#define GPF_SD0_FUNC 2 -#define GPF_SD0_PINS 0x3f /* PF0 thru PF5 */ -#define GPH1_SD0_DET_FUNC 5 - -static void cubieboard_set_sys_clock(void) -{ - u32 reg32; - struct a10_ccm *ccm = (void *)A1X_CCM_BASE; - - /* Switch CPU clock to main oscillator */ - write32(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); - - /* Configure the PLL1. The value is the same one used by u-boot - * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz - */ - write32(0xa1005000, &ccm->pll1_cfg); - - /* FIXME: Delay to wait for PLL to lock */ - u32 wait = 1000; - while (--wait); - - /* Switch CPU to PLL clock */ - reg32 = read32(&ccm->cpu_ahb_apb0_cfg); - reg32 &= ~CPU_CLK_SRC_MASK; - reg32 |= CPU_CLK_SRC_PLL1; - write32(reg32, &ccm->cpu_ahb_apb0_cfg); -} - -static void cubieboard_setup_clocks(void) -{ - struct a10_ccm *ccm = (void *)A1X_CCM_BASE; - - cubieboard_set_sys_clock(); - /* Configure the clock source for APB1. This drives our UART */ - write32(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0), - &ccm->apb1_clk_div_cfg); - - /* Configure the clock for SD0 */ - write32(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) - | SDx_RAT_M(1), &ccm->sd0_clk_cfg); - - /* Enable clock to SD0 */ - a1x_periph_clock_enable(A1X_CLKEN_MMC0); - -} - -static void cubieboard_setup_gpios(void) -{ - /* Mux Status LED pins */ - gpio_set_multipin_func(GPH, GPH_STATUS_LEDS, GPIO_PIN_FUNC_OUTPUT); - /* Turn on green LED to let user know we're executing coreboot code */ - gpio_set(GPH, GPH_LED2_PIN_NO); - - /* Mux UART pins */ - gpio_set_multipin_func(GPB, GPB_UART0_PINS, GPB_UART0_FUNC); - - /* Mux SD pins */ - gpio_set_multipin_func(GPF, GPF_SD0_PINS, GPF_SD0_FUNC); - gpio_set_pin_func(GPH, 1, GPH1_SD0_DET_FUNC); -} - -static void cubieboard_enable_uart(void) -{ - a1x_periph_clock_enable(A1X_CLKEN_UART0); -} - -static void cubieboard_raminit(void) -{ - struct dram_para dram_para = { - .clock = 480, - .type = 3, - .rank_num = 1, - .density = 4096, - .io_width = 16, - .bus_width = 32, - .cas = 6, - .zq = 123, - .odt_en = 0, - .size = 1024, - .tpr0 = 0x30926692, - .tpr1 = 0x1090, - .tpr2 = 0x1a0c8, - .tpr3 = 0, - .tpr4 = 0, - .tpr5 = 0, - .emr1 = 0, - .emr2 = 0, - .emr3 = 0, - }; - - dramc_init(&dram_para); - - /* FIXME: ram_check does not compile for ARM, - * and we didn't init console yet - */ - ////void *const test_base = (void *)A1X_DRAM_BASE; - ////ram_check((u32)test_base, (u32)test_base + 0x1000); -} - -void bootblock_mainboard_init(void); -void bootblock_mainboard_init(void) -{ - /* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very - * early on to get udelay, which is used almost everywhere else. - */ - init_timer(); - - cubieboard_setup_clocks(); - cubieboard_setup_gpios(); - cubieboard_enable_uart(); - - cubieboard_raminit(); -} diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb deleted file mode 100644 index 65ea5ff..0000000 --- a/src/mainboard/cubietech/cubieboard/devicetree.cb +++ /dev/null @@ -1,12 +0,0 @@ -chip cpu/allwinner/a10 - device cpu_cluster 0 on end - - chip drivers/xpowers/axp209 # AXP209 is on I²C 0 - device i2c 0x34 on end - register "dcdc2_voltage_mv" = "1400" # Vcore - register "dcdc3_voltage_mv" = "1250" # DLL Vdd - register "ldo2_voltage_mv" = "3000" # AVCC - register "ldo3_voltage_mv" = "2800" # NC? - register "ldo4_voltage_mv" = "2800" # CSI1-IO-2V8 - end -end diff --git a/src/mainboard/cubietech/cubieboard/romstage.c b/src/mainboard/cubietech/cubieboard/romstage.c deleted file mode 100644 index 6a32c56..0000000 --- a/src/mainboard/cubietech/cubieboard/romstage.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Basic romstage for Cubieboard - * - * Set up system voltages, then increase the CPU clock, before turning control - * to ramstage. The CPU VDD needs to be properly set before it can run at full - * speed. Setting the CPU at full speed helps lzma-decompress ramstage a lot - * faster. - * - * Copyright (C) 2013 Alexandru Gagniuc mr.nuke.me@gmail.com - * Subject to the GNU GPL v2, or (at your option) any later version. - */ - -#include <arch/stages.h> -#include <cbfs.h> -#include <console/console.h> -#include <cpu/allwinner/a10/clock.h> -#include <cpu/allwinner/a10/gpio.h> -#include <cpu/allwinner/a10/twi.h> -#define __SIMPLE_DEVICE__ -#include <device/device.h> -#include <drivers/xpowers/axp209/axp209.h> -#include <drivers/xpowers/axp209/chip.h> - - -#define GPB_TWI0_FUNC 2 -#define GPB_TWI0_PINS ((1 << 0) | (1 << 1)) - -#define AXP209_BUS 0 - -static enum cb_err cubieboard_setup_power(void) -{ - enum cb_err err; - const struct device * pmu; - const struct drivers_xpowers_axp209_config *cfg; - - /* Find the AXP209 in devicetree */ - pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR); - if (!pmu) { - printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n"); - return CB_ERR; - } - - cfg = pmu->chip_info; - - /* Mux TWI0 pins */ - gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC); - /* Enable TWI0 */ - a1x_periph_clock_enable(A1X_CLKEN_TWI0); - a1x_twi_init(AXP209_BUS, 400000); - - if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) { - printk(BIOS_ERR, "PMU initialization failed\n"); - return err; - } - - if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) { - printk(BIOS_WARNING, "Power setup incomplete: " - "CPU may hang when increasing clock\n"); - return err; - } - - printk(BIOS_SPEW, "VDD CPU (DCDC2): %imv\n", cfg->dcdc2_voltage_mv); - printk(BIOS_SPEW, "VDD DLL (DCDC3): %imv\n", cfg->dcdc3_voltage_mv); - printk(BIOS_SPEW, "AVCC (LDO2) : %imv\n", cfg->ldo2_voltage_mv); - printk(BIOS_SPEW, "CSI1-IO (LDO4) : %imv\n", cfg->ldo4_voltage_mv); - printk(BIOS_SPEW, "(LDO3) : %imv\n", cfg->ldo3_voltage_mv); - - return CB_SUCCESS; -} - -void main(void) -{ - void *entry; - enum cb_err err; - - console_init(); - - /* Configure power rails */ - err = cubieboard_setup_power(); - - if (err == CB_SUCCESS) { - /* TODO: Get this clock from devicetree.cb */ - a1x_set_cpu_clock(1008); - } else { - /* cubieboard_setup_power() prints more details */ - printk(BIOS_WARNING, "Will run CPU at reduced speed\n"); - a1x_set_cpu_clock(384); - } - - entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); - printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry); - - stage_exit(entry); -} diff --git a/src/mainboard/cubietech/cubieboard_a10/Kconfig b/src/mainboard/cubietech/cubieboard_a10/Kconfig new file mode 100644 index 0000000..026fb61 --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/Kconfig @@ -0,0 +1,33 @@ +if BOARD_CUBIETECH_CUBIEBOARD_A10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_ALLWINNER_A10 + select BOARD_ROMSIZE_KB_4096 + select DRIVER_XPOWERS_AXP209 + +config MAINBOARD_DIR + string + default cubietech/cubieboard_a10 + +config MAINBOARD_PART_NUMBER + string + default "Cubieboard A10" + +config MAX_CPUS + int + default 1 + +config BOOTBLOCK_MAINBOARD_INIT + string + default "mainboard/cubietech/cubieboard_a10/bootblock.c" + +config DRAM_SIZE_MB + int + default 1024 + +config UART_FOR_CONSOLE + int + default 0 + +endif # BOARD_CUBIETECH_CUBIEBOARD_A10 diff --git a/src/mainboard/cubietech/cubieboard_a10/Makefile.inc b/src/mainboard/cubietech/cubieboard_a10/Makefile.inc new file mode 100644 index 0000000..29763fb --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/Makefile.inc @@ -0,0 +1 @@ +romstage-y += romstage.c diff --git a/src/mainboard/cubietech/cubieboard_a10/board_info.txt b/src/mainboard/cubietech/cubieboard_a10/board_info.txt new file mode 100644 index 0000000..14a3755 --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/board_info.txt @@ -0,0 +1,2 @@ +Category: sbc + diff --git a/src/mainboard/cubietech/cubieboard_a10/bootblock.c b/src/mainboard/cubietech/cubieboard_a10/bootblock.c new file mode 100644 index 0000000..ea8f3b2 --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/bootblock.c @@ -0,0 +1,142 @@ +/* + * Minimal bootblock for Cubieboard + * It sets up CPU clock, and enables the bootblock console. + * + * Copyright (C) 2013 Alexandru Gagniuc mr.nuke.me@gmail.com + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +#include <arch/io.h> +#include <console/uart.h> +#include <console/console.h> +#include <delay.h> +#include <cpu/allwinner/a10/gpio.h> +#include <cpu/allwinner/a10/clock.h> +#include <cpu/allwinner/a10/dramc.h> + +#define CPU_AHB_APB0_DEFAULT \ + CPU_CLK_SRC_OSC24M \ + | APB0_DIV_1 \ + | AHB_DIV_2 \ + | AXI_DIV_1 + +#define GPH_STATUS_LEDS (1 << 20) | (1 << 21) +#define GPH_LED1_PIN_NO 21 +#define GPH_LED2_PIN_NO 20 + +#define GPB_UART0_FUNC 2 +#define GPB_UART0_PINS ((1 << 22) | (1 << 23)) + +#define GPF_SD0_FUNC 2 +#define GPF_SD0_PINS 0x3f /* PF0 thru PF5 */ +#define GPH1_SD0_DET_FUNC 5 + +static void cubieboard_a10_set_sys_clock(void) +{ + u32 reg32; + struct a10_ccm *ccm = (void *)A1X_CCM_BASE; + + /* Switch CPU clock to main oscillator */ + write32(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); + + /* Configure the PLL1. The value is the same one used by u-boot + * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz + */ + write32(0xa1005000, &ccm->pll1_cfg); + + /* FIXME: Delay to wait for PLL to lock */ + u32 wait = 1000; + while (--wait); + + /* Switch CPU to PLL clock */ + reg32 = read32(&ccm->cpu_ahb_apb0_cfg); + reg32 &= ~CPU_CLK_SRC_MASK; + reg32 |= CPU_CLK_SRC_PLL1; + write32(reg32, &ccm->cpu_ahb_apb0_cfg); +} + +static void cubieboard_a10_setup_clocks(void) +{ + struct a10_ccm *ccm = (void *)A1X_CCM_BASE; + + cubieboard_a10_set_sys_clock(); + /* Configure the clock source for APB1. This drives our UART */ + write32(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0), + &ccm->apb1_clk_div_cfg); + + /* Configure the clock for SD0 */ + write32(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) + | SDx_RAT_M(1), &ccm->sd0_clk_cfg); + + /* Enable clock to SD0 */ + a1x_periph_clock_enable(A1X_CLKEN_MMC0); + +} + +static void cubieboard_a10_setup_gpios(void) +{ + /* Mux Status LED pins */ + gpio_set_multipin_func(GPH, GPH_STATUS_LEDS, GPIO_PIN_FUNC_OUTPUT); + /* Turn on green LED to let user know we're executing coreboot code */ + gpio_set(GPH, GPH_LED2_PIN_NO); + + /* Mux UART pins */ + gpio_set_multipin_func(GPB, GPB_UART0_PINS, GPB_UART0_FUNC); + + /* Mux SD pins */ + gpio_set_multipin_func(GPF, GPF_SD0_PINS, GPF_SD0_FUNC); + gpio_set_pin_func(GPH, 1, GPH1_SD0_DET_FUNC); +} + +static void cubieboard_a10_enable_uart(void) +{ + a1x_periph_clock_enable(A1X_CLKEN_UART0); +} + +static void cubieboard_a10_raminit(void) +{ + struct dram_para dram_para = { + .clock = 480, + .type = 3, + .rank_num = 1, + .density = 4096, + .io_width = 16, + .bus_width = 32, + .cas = 6, + .zq = 123, + .odt_en = 0, + .size = 1024, + .tpr0 = 0x30926692, + .tpr1 = 0x1090, + .tpr2 = 0x1a0c8, + .tpr3 = 0, + .tpr4 = 0, + .tpr5 = 0, + .emr1 = 0, + .emr2 = 0, + .emr3 = 0, + }; + + dramc_init(&dram_para); + + /* FIXME: ram_check does not compile for ARM, + * and we didn't init console yet + */ + ////void *const test_base = (void *)A1X_DRAM_BASE; + ////ram_check((u32)test_base, (u32)test_base + 0x1000); +} + +void bootblock_mainboard_init(void); +void bootblock_mainboard_init(void) +{ + /* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very + * early on to get udelay, which is used almost everywhere else. + */ + init_timer(); + + cubieboard_a10_setup_clocks(); + cubieboard_a10_setup_gpios(); + cubieboard_a10_enable_uart(); + + cubieboard_a10_raminit(); +} diff --git a/src/mainboard/cubietech/cubieboard_a10/devicetree.cb b/src/mainboard/cubietech/cubieboard_a10/devicetree.cb new file mode 100644 index 0000000..65ea5ff --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/devicetree.cb @@ -0,0 +1,12 @@ +chip cpu/allwinner/a10 + device cpu_cluster 0 on end + + chip drivers/xpowers/axp209 # AXP209 is on I²C 0 + device i2c 0x34 on end + register "dcdc2_voltage_mv" = "1400" # Vcore + register "dcdc3_voltage_mv" = "1250" # DLL Vdd + register "ldo2_voltage_mv" = "3000" # AVCC + register "ldo3_voltage_mv" = "2800" # NC? + register "ldo4_voltage_mv" = "2800" # CSI1-IO-2V8 + end +end diff --git a/src/mainboard/cubietech/cubieboard_a10/romstage.c b/src/mainboard/cubietech/cubieboard_a10/romstage.c new file mode 100644 index 0000000..3a20652 --- /dev/null +++ b/src/mainboard/cubietech/cubieboard_a10/romstage.c @@ -0,0 +1,94 @@ +/* + * Basic romstage for Cubieboard + * + * Set up system voltages, then increase the CPU clock, before turning control + * to ramstage. The CPU VDD needs to be properly set before it can run at full + * speed. Setting the CPU at full speed helps lzma-decompress ramstage a lot + * faster. + * + * Copyright (C) 2013 Alexandru Gagniuc mr.nuke.me@gmail.com + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +#include <arch/stages.h> +#include <cbfs.h> +#include <console/console.h> +#include <cpu/allwinner/a10/clock.h> +#include <cpu/allwinner/a10/gpio.h> +#include <cpu/allwinner/a10/twi.h> +#define __SIMPLE_DEVICE__ +#include <device/device.h> +#include <drivers/xpowers/axp209/axp209.h> +#include <drivers/xpowers/axp209/chip.h> + + +#define GPB_TWI0_FUNC 2 +#define GPB_TWI0_PINS ((1 << 0) | (1 << 1)) + +#define AXP209_BUS 0 + +static enum cb_err cubieboard_a10_setup_power(void) +{ + enum cb_err err; + const struct device * pmu; + const struct drivers_xpowers_axp209_config *cfg; + + /* Find the AXP209 in devicetree */ + pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR); + if (!pmu) { + printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n"); + return CB_ERR; + } + + cfg = pmu->chip_info; + + /* Mux TWI0 pins */ + gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC); + /* Enable TWI0 */ + a1x_periph_clock_enable(A1X_CLKEN_TWI0); + a1x_twi_init(AXP209_BUS, 400000); + + if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) { + printk(BIOS_ERR, "PMU initialization failed\n"); + return err; + } + + if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) { + printk(BIOS_WARNING, "Power setup incomplete: " + "CPU may hang when increasing clock\n"); + return err; + } + + printk(BIOS_SPEW, "VDD CPU (DCDC2): %imv\n", cfg->dcdc2_voltage_mv); + printk(BIOS_SPEW, "VDD DLL (DCDC3): %imv\n", cfg->dcdc3_voltage_mv); + printk(BIOS_SPEW, "AVCC (LDO2) : %imv\n", cfg->ldo2_voltage_mv); + printk(BIOS_SPEW, "CSI1-IO (LDO4) : %imv\n", cfg->ldo4_voltage_mv); + printk(BIOS_SPEW, "(LDO3) : %imv\n", cfg->ldo3_voltage_mv); + + return CB_SUCCESS; +} + +void main(void) +{ + void *entry; + enum cb_err err; + + console_init(); + + /* Configure power rails */ + err = cubieboard_a10_setup_power(); + + if (err == CB_SUCCESS) { + /* TODO: Get this clock from devicetree.cb */ + a1x_set_cpu_clock(1008); + } else { + /* cubieboard_a10_setup_power() prints more details */ + printk(BIOS_WARNING, "Will run CPU at reduced speed\n"); + a1x_set_cpu_clock(384); + } + + entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); + printk(BIOS_INFO, "entry is 0x%p, leaving romstage.\n", entry); + + stage_exit(entry); +} diff --git a/src/mainboard/digital_logic/Kconfig b/src/mainboard/digital_logic/Kconfig index 11b1709..21619aa 100644 --- a/src/mainboard/digital_logic/Kconfig +++ b/src/mainboard/digital_logic/Kconfig @@ -3,7 +3,7 @@ if VENDOR_DIGITAL_LOGIC choice prompt "Mainboard model"
-config BOARD_DIGITAL_LOGIC_ADL855PC +config BOARD_DIGITAL_LOGIC_SMARTMODULE855 bool "smartModule855" config BOARD_DIGITAL_LOGIC_MSM586SEG bool "MSM586SEG" @@ -12,7 +12,7 @@ config BOARD_DIGITAL_LOGIC_MSM800SEV
endchoice
-source "src/mainboard/digital_logic/adl855pc/Kconfig" +source "src/mainboard/digital_logic/smartmodule855/Kconfig" source "src/mainboard/digital_logic/msm586seg/Kconfig" source "src/mainboard/digital_logic/msm800sev/Kconfig"
diff --git a/src/mainboard/digital_logic/adl855pc/Kconfig b/src/mainboard/digital_logic/adl855pc/Kconfig deleted file mode 100644 index a863c4b..0000000 --- a/src/mainboard/digital_logic/adl855pc/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -if BOARD_DIGITAL_LOGIC_ADL855PC - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA479M - select NORTHBRIDGE_INTEL_I855 - select SOUTHBRIDGE_INTEL_I82801DX - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_1024 - -config MAINBOARD_DIR - string - default digital_logic/adl855pc - -config MAINBOARD_PART_NUMBER - string - default "smartModule855" - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_DIGITAL_LOGIC_ADL855PC diff --git a/src/mainboard/digital_logic/adl855pc/board_info.txt b/src/mainboard/digital_logic/adl855pc/board_info.txt deleted file mode 100644 index 7680e6f..0000000 --- a/src/mainboard/digital_logic/adl855pc/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/digital_logic/adl855pc/cmos.layout b/src/mainboard/digital_logic/adl855pc/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/digital_logic/adl855pc/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/digital_logic/adl855pc/devicetree.cb b/src/mainboard/digital_logic/adl855pc/devicetree.cb deleted file mode 100644 index 3a9603b..0000000 --- a/src/mainboard/digital_logic/adl855pc/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/intel/i855 - device domain 0 on - device pci 0.0 on end - device pci 1.0 on end - chip southbridge/intel/i82801dx -# pci 11.0 on end -# pci 11.1 on end -# pci 11.2 on end -# pci 11.3 on end -# pci 11.4 on end -# pci 11.5 on end -# pci 11.6 on end -# pci 12.0 on end - register "enable_usb" = "0" - register "enable_native_ide" = "0" - chip superio/winbond/w83627hf # link 1 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA479M - device lapic 0 on end - end - end -end diff --git a/src/mainboard/digital_logic/adl855pc/irq_tables.c b/src/mainboard/digital_logic/adl855pc/irq_tables.c deleted file mode 100644 index 94adba1..0000000 --- a/src/mainboard/digital_logic/adl855pc/irq_tables.c +++ /dev/null @@ -1,36 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x88, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x8231, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* 8231 ethernet */ - {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, - /* 8231 internal */ - {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* PCI slot */ - {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, - {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/digital_logic/adl855pc/romstage.c b/src/mainboard/digital_logic/adl855pc/romstage.c deleted file mode 100644 index 093c60b..0000000 --- a/src/mainboard/digital_logic/adl855pc/romstage.c +++ /dev/null @@ -1,64 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <lib.h> -#include "drivers/pc80/udelay_io.c" -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include "southbridge/intel/i82801dx/i82801dx.h" -#include "northbridge/intel/i855/raminit.h" -#include "northbridge/intel/i855/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/i855/raminit.c" -#include "northbridge/intel/i855/reset_test.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - if (bist == 0) { -#if 0 - enable_lapic(); - init_timer(); -#endif - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - print_pci_devices(); -#endif - - if (!bios_reset_detected()) { - enable_smbus(); -#if 0 - dump_spd_registers(); - dump_smbus_registers(); -#endif - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); - } - -#if 0 - dump_pci_devices(); - dump_pci_device(PCI_DEV(0, 0, 0)); -#endif -} diff --git a/src/mainboard/digital_logic/smartmodule855/Kconfig b/src/mainboard/digital_logic/smartmodule855/Kconfig new file mode 100644 index 0000000..a7f12b8 --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/Kconfig @@ -0,0 +1,33 @@ +if BOARD_DIGITAL_LOGIC_SMARTMODULE855 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_MPGA479M + select NORTHBRIDGE_INTEL_I855 + select SOUTHBRIDGE_INTEL_I82801DX + select SUPERIO_WINBOND_W83627HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_1024 + +config MAINBOARD_DIR + string + default digital_logic/smartmodule855 + +config MAINBOARD_PART_NUMBER + string + default "smartModule855" + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config IRQ_SLOT_COUNT + int + default 5 + +endif # BOARD_DIGITAL_LOGIC_SMARTMODULE855 diff --git a/src/mainboard/digital_logic/smartmodule855/board_info.txt b/src/mainboard/digital_logic/smartmodule855/board_info.txt new file mode 100644 index 0000000..7680e6f --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/board_info.txt @@ -0,0 +1 @@ +Category: half diff --git a/src/mainboard/digital_logic/smartmodule855/cmos.layout b/src/mainboard/digital_logic/smartmodule855/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/digital_logic/smartmodule855/devicetree.cb b/src/mainboard/digital_logic/smartmodule855/devicetree.cb new file mode 100644 index 0000000..3a9603b --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/intel/i855 + device domain 0 on + device pci 0.0 on end + device pci 1.0 on end + chip southbridge/intel/i82801dx +# pci 11.0 on end +# pci 11.1 on end +# pci 11.2 on end +# pci 11.3 on end +# pci 11.4 on end +# pci 11.5 on end +# pci 11.6 on end +# pci 12.0 on end + register "enable_usb" = "0" + register "enable_native_ide" = "0" + chip superio/winbond/w83627hf # link 1 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + end + end + end + device cpu_cluster 0 on + chip cpu/intel/socket_mPGA479M + device lapic 0 on end + end + end +end diff --git a/src/mainboard/digital_logic/smartmodule855/irq_tables.c b/src/mainboard/digital_logic/smartmodule855/irq_tables.c new file mode 100644 index 0000000..94adba1 --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/irq_tables.c @@ -0,0 +1,36 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0, /* Where the interrupt router lies (bus) */ + 0x88, /* Where the interrupt router lies (dev) */ + 0x1c20, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x8231, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* 8231 ethernet */ + {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, + /* 8231 internal */ + {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, + /* PCI slot */ + {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, + {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, + {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/digital_logic/smartmodule855/romstage.c b/src/mainboard/digital_logic/smartmodule855/romstage.c new file mode 100644 index 0000000..093c60b --- /dev/null +++ b/src/mainboard/digital_logic/smartmodule855/romstage.c @@ -0,0 +1,64 @@ +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <lib.h> +#include "drivers/pc80/udelay_io.c" +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "northbridge/intel/i855/raminit.h" +#include "northbridge/intel/i855/debug.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/i855/raminit.c" +#include "northbridge/intel/i855/reset_test.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + if (bist == 0) { +#if 0 + enable_lapic(); + init_timer(); +#endif + } + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +#if 0 + print_pci_devices(); +#endif + + if (!bios_reset_detected()) { + enable_smbus(); +#if 0 + dump_spd_registers(); + dump_smbus_registers(); +#endif + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + } + +#if 0 + dump_pci_devices(); + dump_pci_device(PCI_DEV(0, 0, 0)); +#endif +} diff --git a/src/mainboard/ecs/Kconfig b/src/mainboard/ecs/Kconfig index 7dd9fa9..cbd0cf7 100644 --- a/src/mainboard/ecs/Kconfig +++ b/src/mainboard/ecs/Kconfig @@ -27,7 +27,7 @@ config BOARD_ECS_P6IWP_FE
endchoice
-source "src/mainboard/ecs/p6iwp-fe/Kconfig" +source "src/mainboard/ecs/p6iwp_fe/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/ecs/p6iwp-fe/Kconfig b/src/mainboard/ecs/p6iwp-fe/Kconfig deleted file mode 100644 index 5670dae..0000000 --- a/src/mainboard/ecs/p6iwp-fe/Kconfig +++ /dev/null @@ -1,44 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_ECS_P6IWP_FE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_PGA370 - select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801AX - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default ecs/p6iwp-fe - -config MAINBOARD_PART_NUMBER - string - default "P6IWP-FE" - -config IRQ_SLOT_COUNT - int - default 10 - -endif # BOARD_ECS_P6IWP_FE diff --git a/src/mainboard/ecs/p6iwp-fe/board_info.txt b/src/mainboard/ecs/p6iwp-fe/board_info.txt deleted file mode 100644 index 31ce6e4..0000000 --- a/src/mainboard/ecs/p6iwp-fe/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&am... -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/ecs/p6iwp-fe/devicetree.cb b/src/mainboard/ecs/p6iwp-fe/devicetree.cb deleted file mode 100644 index 405b547..0000000 --- a/src/mainboard/ecs/p6iwp-fe/devicetree.cb +++ /dev/null @@ -1,86 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) - device pci 1.0 on end # Chipset Graphics Controller (CGC) - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" - - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA bridge - chip superio/ite/it8712f # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 - io 0x64 = 0x1200 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - end - end -end diff --git a/src/mainboard/ecs/p6iwp-fe/irq_tables.c b/src/mainboard/ecs/p6iwp-fe/irq_tables.c deleted file mode 100644 index f9cc97d..0000000 --- a/src/mainboard/ecs/p6iwp-fe/irq_tables.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0x1c00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x7, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, - {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, - {0x01, (0x04 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x3, 0x0}, - {0x01, (0x05 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x4, 0x0}, - {0x01, (0x0a << 3) | 0x0, {{0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x5, 0x0}, - {0x01, (0x07 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x6, 0x0}, - {0x01, (0x08 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x7, 0x0}, - {0x01, (0x09 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x8, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x1f << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/ecs/p6iwp-fe/romstage.c b/src/mainboard/ecs/p6iwp-fe/romstage.c deleted file mode 100644 index 9d5f2cd..0000000 --- a/src/mainboard/ecs/p6iwp-fe/romstage.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82801ax/i82801ax.h" -#include "northbridge/intel/i82810/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); - dump_spd_registers(); -} diff --git a/src/mainboard/ecs/p6iwp_fe/Kconfig b/src/mainboard/ecs/p6iwp_fe/Kconfig new file mode 100644 index 0000000..43d850d --- /dev/null +++ b/src/mainboard/ecs/p6iwp_fe/Kconfig @@ -0,0 +1,44 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_ECS_P6IWP_FE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801AX + select SUPERIO_ITE_IT8712F + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default ecs/p6iwp_fe + +config MAINBOARD_PART_NUMBER + string + default "P6IWP-FE" + +config IRQ_SLOT_COUNT + int + default 10 + +endif # BOARD_ECS_P6IWP_FE diff --git a/src/mainboard/ecs/p6iwp_fe/board_info.txt b/src/mainboard/ecs/p6iwp_fe/board_info.txt new file mode 100644 index 0000000..31ce6e4 --- /dev/null +++ b/src/mainboard/ecs/p6iwp_fe/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&am... +ROM package: PLCC +ROM protocol: FWH +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/ecs/p6iwp_fe/devicetree.cb b/src/mainboard/ecs/p6iwp_fe/devicetree.cb new file mode 100644 index 0000000..405b547 --- /dev/null +++ b/src/mainboard/ecs/p6iwp_fe/devicetree.cb @@ -0,0 +1,86 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) + device pci 1.0 on end # Chipset Graphics Controller (CGC) + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA bridge + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 + io 0x64 = 0x1200 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + end + end +end diff --git a/src/mainboard/ecs/p6iwp_fe/irq_tables.c b/src/mainboard/ecs/p6iwp_fe/irq_tables.c new file mode 100644 index 0000000..f9cc97d --- /dev/null +++ b/src/mainboard/ecs/p6iwp_fe/irq_tables.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0x1c00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x7, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, + {0x01, (0x04 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x3, 0x0}, + {0x01, (0x05 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x4, 0x0}, + {0x01, (0x0a << 3) | 0x0, {{0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x5, 0x0}, + {0x01, (0x07 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x6, 0x0}, + {0x01, (0x08 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x7, 0x0}, + {0x01, (0x09 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x8, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x1f << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/ecs/p6iwp_fe/romstage.c b/src/mainboard/ecs/p6iwp_fe/romstage.c new file mode 100644 index 0000000..9d5f2cd --- /dev/null +++ b/src/mainboard/ecs/p6iwp_fe/romstage.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82801ax/i82801ax.h" +#include "northbridge/intel/i82810/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define CLKIN_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_24); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + dump_spd_registers(); +} diff --git a/src/mainboard/emulation/Kconfig b/src/mainboard/emulation/Kconfig index 3fbc415..60242f1 100644 --- a/src/mainboard/emulation/Kconfig +++ b/src/mainboard/emulation/Kconfig @@ -19,9 +19,9 @@ config BOARD_EMULATION_QEMU_X86 default y depends on BOARD_EMULATION_QEMU_X86_I440FX || BOARD_EMULATION_QEMU_X86_Q35
-source "src/mainboard/emulation/qemu-i440fx/Kconfig" -source "src/mainboard/emulation/qemu-q35/Kconfig" -source "src/mainboard/emulation/qemu-armv7/Kconfig" +source "src/mainboard/emulation/qemu_x86_i440fx_piix4/Kconfig" +source "src/mainboard/emulation/qemu_x86_q35_ich9/Kconfig" +source "src/mainboard/emulation/qemu_armv7/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/emulation/qemu-armv7/Kconfig b/src/mainboard/emulation/qemu-armv7/Kconfig deleted file mode 100644 index fad20c6..0000000 --- a/src/mainboard/emulation/qemu-armv7/Kconfig +++ /dev/null @@ -1,101 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Google Inc. -## -## This software is licensed under the terms of the GNU General Public -## License version 2, as published by the Free Software Foundation, and -## may be copied, distributed, and modified under those terms. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. - -# Emulation for ARM Ltd Versatile Express Cortex-A9 -# http://www.arm.com/products/tools/development-boards/versatile-express - -# To execute, do: -# export QEMU_AUDIO_DRV=none -# qemu-system-arm -M vexpress-a9 -m 1024M -nographic -kernel build/coreboot.rom - -if BOARD_EMULATION_QEMU_ARMV7 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_ARMLTD_CORTEX_A9 - select DRIVERS_UART_PL011 - select BOARD_ROMSIZE_KB_4096 - -config MAINBOARD_DIR - string - default emulation/qemu-armv7 - -config MAINBOARD_PART_NUMBER - string - default "QEMU ARMv7" - -config MAX_CPUS - int - default 2 - -config MAINBOARD_VENDOR - string - default "ARM Ltd." - -config SYS_SDRAM_BASE - hex "SDRAM base address" - default 0x01000000 - -config DRAM_SIZE_MB - int - default 1024 - -# Memory map for qemu vexpress-a9: -# -# 0x0000_0000: jump instruction (by qemu) -# 0x0001_0000: bootblock (entry of kernel / firmware) -# 0x0002_0000: romstage, assume up to 128KB in size. -# 0x0007_ff00: stack pointer -# 0x0010_0000: CBFS header -# 0x0011_0000: CBFS data -# 0x0100_0000: reserved for ramstage -# 0x1000_0000: I/O map address - -config BOOTBLOCK_BASE - hex - default 0x00010000 - -config ROMSTAGE_BASE - hex - default 0x00020000 - -config RAMSTAGE_BASE - hex - default SYS_SDRAM_BASE - -config BOOTBLOCK_ROM_OFFSET - hex - default 0x0 - -config CBFS_HEADER_ROM_OFFSET - hex - default 0x0100000 - -config CBFS_ROM_OFFSET - hex - default 0x0110000 - -config STACK_TOP - hex - default 0x0007ff00 - -config STACK_BOTTOM - hex - default 0x00040000 - -config STACK_SIZE - hex - default 0x0003ff00 - -endif # BOARD_EMULATION_QEMU_ARMV7 diff --git a/src/mainboard/emulation/qemu-armv7/Makefile.inc b/src/mainboard/emulation/qemu-armv7/Makefile.inc deleted file mode 100644 index e088da6..0000000 --- a/src/mainboard/emulation/qemu-armv7/Makefile.inc +++ /dev/null @@ -1,27 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Google Inc. -## -## This software is licensed under the terms of the GNU General Public -## License version 2, as published by the Free Software Foundation, and -## may be copied, distributed, and modified under those terms. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. - -romstage-y += romstage.c - -bootblock-y += media.c -romstage-y += media.c -ramstage-y += media.c - -bootblock-y += timer.c -romstage-y += timer.c -ramstage-y += timer.c - -bootblock-y += mmio.c -romstage-y += mmio.c -ramstage-y += mmio.c diff --git a/src/mainboard/emulation/qemu-armv7/board_info.txt b/src/mainboard/emulation/qemu-armv7/board_info.txt deleted file mode 100644 index 1bb78e9..0000000 --- a/src/mainboard/emulation/qemu-armv7/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: QEMU armv7 (vexpress-a9) -Category: emulation -Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu-armv7/devicetree.cb b/src/mainboard/emulation/qemu-armv7/devicetree.cb deleted file mode 100644 index 9153442..0000000 --- a/src/mainboard/emulation/qemu-armv7/devicetree.cb +++ /dev/null @@ -1,20 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Google, Inc. -## -## This software is licensed under the terms of the GNU General Public -## License version 2, as published by the Free Software Foundation, and -## may be copied, distributed, and modified under those terms. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. - -# TODO fill with Versatile Express board data in QEMU. -chip cpu/armltd/cortex-a9 - chip drivers/generic/generic # I2C0 controller - device i2c 6 on end # Fake component for testing - end -end diff --git a/src/mainboard/emulation/qemu-armv7/mainboard.c b/src/mainboard/emulation/qemu-armv7/mainboard.c deleted file mode 100644 index 83a55e3..0000000 --- a/src/mainboard/emulation/qemu-armv7/mainboard.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> - -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Enable qemu/armv7 device...\n"); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/emulation/qemu-armv7/media.c b/src/mainboard/emulation/qemu-armv7/media.c deleted file mode 100644 index 1168881..0000000 --- a/src/mainboard/emulation/qemu-armv7/media.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <cbfs.h> -#include <string.h> -#include <console/console.h> - -/* Simple memory-mapped ROM emulation. */ - -static int emu_rom_open(struct cbfs_media *media) -{ - return 0; -} - -static void *emu_rom_map(struct cbfs_media *media, size_t offset, size_t count) -{ - return (void*)(offset + CONFIG_BOOTBLOCK_BASE); -} - -static void *emu_rom_unmap(struct cbfs_media *media, const void *address) -{ - return NULL; -} - -static size_t emu_rom_read(struct cbfs_media *media, void *dest, size_t offset, - size_t count) -{ - void *ptr = emu_rom_map(media, offset, count); - memcpy(dest, ptr, count); - emu_rom_unmap(media, ptr); - return count; -} - -static int emu_rom_close(struct cbfs_media *media) -{ - return 0; -} - -int init_emu_rom_cbfs_media(struct cbfs_media *media); - -int init_emu_rom_cbfs_media(struct cbfs_media *media) -{ - media->open = emu_rom_open; - media->close = emu_rom_close; - media->map = emu_rom_map; - media->unmap = emu_rom_unmap; - media->read = emu_rom_read; - return 0; -} - -int init_default_cbfs_media(struct cbfs_media *media) -{ - return init_emu_rom_cbfs_media(media); -} diff --git a/src/mainboard/emulation/qemu-armv7/mmio.c b/src/mainboard/emulation/qemu-armv7/mmio.c deleted file mode 100644 index 00a20a2..0000000 --- a/src/mainboard/emulation/qemu-armv7/mmio.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/uart.h> - -#define VEXPRESS_UART0_IO_ADDRESS (0x10009000) - -uintptr_t uart_platform_base(int idx) -{ - return VEXPRESS_UART0_IO_ADDRESS; -} diff --git a/src/mainboard/emulation/qemu-armv7/romstage.c b/src/mainboard/emulation/qemu-armv7/romstage.c deleted file mode 100644 index 00dfecd..0000000 --- a/src/mainboard/emulation/qemu-armv7/romstage.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <cbfs.h> -#include <console/console.h> -#include <arch/stages.h> - -void main(void) -{ - void *entry; - - console_init(); - - entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); - - stage_exit(entry); -} diff --git a/src/mainboard/emulation/qemu-armv7/timer.c b/src/mainboard/emulation/qemu-armv7/timer.c deleted file mode 100644 index 53c3789..0000000 --- a/src/mainboard/emulation/qemu-armv7/timer.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -void udelay(unsigned int n); -void udelay(unsigned int n) { - /* TODO provide delay here. */ -} - -int init_timer(void); -int init_timer(void) { - return 0; -} diff --git a/src/mainboard/emulation/qemu-i440fx/Kconfig b/src/mainboard/emulation/qemu-i440fx/Kconfig deleted file mode 100644 index 34f3342..0000000 --- a/src/mainboard/emulation/qemu-i440fx/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -if BOARD_EMULATION_QEMU_X86_I440FX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_QEMU_X86 - select SOUTHBRIDGE_INTEL_I82371EB - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_256 - select DYNAMIC_CBMEM - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_DO_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - -config MAINBOARD_DIR - string - default emulation/qemu-i440fx - -config MAINBOARD_PART_NUMBER - string - default "QEMU x86 i440fx/piix4" - -config IRQ_SLOT_COUNT - int - default 6 - -config DCACHE_RAM_BASE - hex - default 0xd0000 - -config DCACHE_RAM_SIZE - hex - default 0x10000 - -endif # BOARD_EMULATION_QEMU_X86_I440FX diff --git a/src/mainboard/emulation/qemu-i440fx/Makefile.inc b/src/mainboard/emulation/qemu-i440fx/Makefile.inc deleted file mode 100644 index 7423b2b..0000000 --- a/src/mainboard/emulation/qemu-i440fx/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ -cpu_incs += $(src)/mainboard/emulation/qemu-i440fx/cache_as_ram.inc -ramstage-y += northbridge.c -ramstage-y += fw_cfg.c diff --git a/src/mainboard/emulation/qemu-i440fx/acpi/cpu-hotplug.asl b/src/mainboard/emulation/qemu-i440fx/acpi/cpu-hotplug.asl deleted file mode 100644 index 0f3e83b..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi/cpu-hotplug.asl +++ /dev/null @@ -1,78 +0,0 @@ -/**************************************************************** - * CPU hotplug - ****************************************************************/ - -Scope(_SB) { - /* Objects filled in by run-time generated SSDT */ - External(NTFY, MethodObj) - External(CPON, PkgObj) - - /* Methods called by run-time generated SSDT Processor objects */ - Method(CPMA, 1, NotSerialized) { - // _MAT method - create an madt apic buffer - // Arg0 = Processor ID = Local APIC ID - // Local0 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Arg0)), Local0) - // Local1 = Buffer (in madt apic form) to return - Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1) - // Update the processor id, lapic id, and enable/disable status - Store(Arg0, Index(Local1, 2)) - Store(Arg0, Index(Local1, 3)) - Store(Local0, Index(Local1, 4)) - Return (Local1) - } - Method(CPST, 1, NotSerialized) { - // _STA method - return ON status of cpu - // Arg0 = Processor ID = Local APIC ID - // Local0 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Arg0)), Local0) - If (Local0) { - Return (0xF) - } Else { - Return (0x0) - } - } - Method(CPEJ, 2, NotSerialized) { - // _EJ0 method - eject callback - Sleep(200) - } - - /* CPU hotplug notify method */ - OperationRegion(PRST, SystemIO, 0xaf00, 32) - Field(PRST, ByteAcc, NoLock, Preserve) { - PRS, 256 - } - Method(PRSC, 0) { - // Local5 = active cpu bitmap - Store(PRS, Local5) - // Local2 = last read byte from bitmap - Store(Zero, Local2) - // Local0 = Processor ID / APIC ID iterator - Store(Zero, Local0) - While (LLess(Local0, SizeOf(CPON))) { - // Local1 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Local0)), Local1) - If (And(Local0, 0x07)) { - // Shift down previously read bitmap byte - ShiftRight(Local2, 1, Local2) - } Else { - // Read next byte from cpu bitmap - Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) - } - // Local3 = active state for this cpu - Store(And(Local2, 1), Local3) - - If (LNotEqual(Local1, Local3)) { - // State change - update CPON with new state - Store(Local3, Index(CPON, Local0)) - // Do CPU notify - If (LEqual(Local3, 1)) { - NTFY(Local0, 1) - } Else { - NTFY(Local0, 3) - } - } - Increment(Local0) - } - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/acpi/dbug.asl b/src/mainboard/emulation/qemu-i440fx/acpi/dbug.asl deleted file mode 100644 index 276321f..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi/dbug.asl +++ /dev/null @@ -1,26 +0,0 @@ -/**************************************************************** - * Debugging - ****************************************************************/ - -Scope() { - /* Debug Output */ - OperationRegion(DBG, SystemIO, 0x0402, 0x01) - Field(DBG, ByteAcc, NoLock, Preserve) { - DBGB, 8, - } - - /* Debug method - use this method to send output to the QEMU - * BIOS debug port. This method handles strings, integers, - * and buffers. For example: DBUG("abc") DBUG(0x123) */ - Method(DBUG, 1) { - ToHexString(Arg0, Local0) - ToBuffer(Local0, Local0) - Subtract(SizeOf(Local0), 1, Local1) - Store(Zero, Local2) - While (LLess(Local2, Local1)) { - Store(DerefOf(Index(Local0, Local2)), DBGB) - Increment(Local2) - } - Store(0x0A, DBGB) - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/acpi/hpet.asl b/src/mainboard/emulation/qemu-i440fx/acpi/hpet.asl deleted file mode 100644 index f33e527..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi/hpet.asl +++ /dev/null @@ -1,36 +0,0 @@ -/**************************************************************** - * HPET - ****************************************************************/ - -Scope(_SB) { - Device(HPET) { - Name(_HID, EISAID("PNP0103")) - Name(_UID, 0) - OperationRegion(HPTM, SystemMemory, 0xFED00000, 0x400) - Field(HPTM, DWordAcc, Lock, Preserve) { - VEND, 32, - PRD, 32, - } - Method(_STA, 0, NotSerialized) { - Store(VEND, Local0) - Store(PRD, Local1) - ShiftRight(Local0, 16, Local0) - If (LOr(LEqual(Local0, 0), LEqual(Local0, 0xffff))) { - Return (0x0) - } - If (LOr(LEqual(Local1, 0), LGreater(Local1, 100000000))) { - Return (0x0) - } - Return (0x0F) - } - Name(_CRS, ResourceTemplate() { -#if 0 /* This makes WinXP BSOD for not yet figured reasons. */ - IRQNoFlags() {2, 8} -#endif - Memory32Fixed(ReadOnly, - 0xFED00000, // Address Base - 0x00000400, // Address Length - ) - }) - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/acpi/isa.asl b/src/mainboard/emulation/qemu-i440fx/acpi/isa.asl deleted file mode 100644 index 23761db..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi/isa.asl +++ /dev/null @@ -1,102 +0,0 @@ -/* Common legacy ISA style devices. */ -Scope(_SB.PCI0.ISA) { - - Device(RTC) { - Name(_HID, EisaId("PNP0B00")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0070, 0x0070, 0x10, 0x02) - IRQNoFlags() { 8 } - IO(Decode16, 0x0072, 0x0072, 0x02, 0x06) - }) - } - - Device(KBD) { - Name(_HID, EisaId("PNP0303")) - Method(_STA, 0, NotSerialized) { - Return (0x0f) - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO(Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags() { 1 } - }) - } - - Device(MOU) { - Name(_HID, EisaId("PNP0F13")) - Method(_STA, 0, NotSerialized) { - Return (0x0f) - } - Name(_CRS, ResourceTemplate() { - IRQNoFlags() { 12 } - }) - } - - Device(FDC0) { - Name(_HID, EisaId("PNP0700")) - Method(_STA, 0, NotSerialized) { - Store(FDEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO(Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags() { 6 } - DMA(Compatibility, NotBusMaster, Transfer8) { 2 } - }) - } - - Device(LPT) { - Name(_HID, EisaId("PNP0400")) - Method(_STA, 0, NotSerialized) { - Store(LPEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0378, 0x0378, 0x08, 0x08) - IRQNoFlags() { 7 } - }) - } - - Device(COM1) { - Name(_HID, EisaId("PNP0501")) - Name(_UID, 0x01) - Method(_STA, 0, NotSerialized) { - Store(CAEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x03F8, 0x03F8, 0x00, 0x08) - IRQNoFlags() { 4 } - }) - } - - Device(COM2) { - Name(_HID, EisaId("PNP0501")) - Name(_UID, 0x02) - Method(_STA, 0, NotSerialized) { - Store(CBEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x02F8, 0x02F8, 0x00, 0x08) - IRQNoFlags() { 3 } - }) - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/acpi/pci-crs.asl b/src/mainboard/emulation/qemu-i440fx/acpi/pci-crs.asl deleted file mode 100644 index 63d1fd5..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi/pci-crs.asl +++ /dev/null @@ -1,94 +0,0 @@ -/* PCI CRS (current resources) definition. */ -Scope(_SB.PCI0) { - - Name(CRES, ResourceTemplate() { - WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x00FF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0100, // Address Length - ,, ) - IO(Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0D00, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0xF300, // Address Length - ,, , TypeStatic) - DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000A0000, // Address Range Minimum - 0x000BFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00020000, // Address Length - ,, , AddressRangeMemory, TypeStatic) - DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0xE0000000, // Address Range Minimum - 0xFEBFFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x1EC00000, // Address Length - ,, PW32, AddressRangeMemory, TypeStatic) - }) - - Name(CR64, ResourceTemplate() { - QWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x8000000000, // Address Range Minimum - 0xFFFFFFFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x8000000000, // Address Length - ,, PW64, AddressRangeMemory, TypeStatic) - }) - - Method(_CRS, 0) { -#if 0 - /* Fields provided by dynamically created ssdt */ - External(P0S, IntObj) - External(P0E, IntObj) - External(P1V, IntObj) - External(P1S, BuffObj) - External(P1E, BuffObj) - External(P1L, BuffObj) - - /* fixup 32bit pci io window */ - CreateDWordField(CRES, _SB.PCI0.PW32._MIN, PS32) - CreateDWordField(CRES, _SB.PCI0.PW32._MAX, PE32) - CreateDWordField(CRES, _SB.PCI0.PW32._LEN, PL32) - Store(P0S, PS32) - Store(P0E, PE32) - Store(Add(Subtract(P0E, P0S), 1), PL32) - - If (LEqual(P1V, Zero)) { - Return (CRES) - } - - /* fixup 64bit pci io window */ - CreateQWordField(CR64, _SB.PCI0.PW64._MIN, PS64) - CreateQWordField(CR64, _SB.PCI0.PW64._MAX, PE64) - CreateQWordField(CR64, _SB.PCI0.PW64._LEN, PL64) - Store(P1S, PS64) - Store(P1E, PE64) - Store(P1L, PL64) - /* add window and return result */ - ConcatenateResTemplate(CRES, CR64, Local0) - Return (Local0) -#else - Return (CRES) -#endif - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/acpi_tables.c b/src/mainboard/emulation/qemu-i440fx/acpi_tables.c deleted file mode 100644 index 8be187a..0000000 --- a/src/mainboard/emulation/qemu-i440fx/acpi_tables.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> - -#include "fw_cfg.h" - -extern const unsigned char AmlCode[]; -#if CONFIG_HAVE_ACPI_SLIC -unsigned long acpi_create_slic(unsigned long current); -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - generate_cpu_entries(); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -#define ALIGN_CURRENT current = (ALIGN(current, 16)) -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_xsdt_t *xsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_mcfg_t *mcfg; - acpi_fadt_t *fadt; - acpi_facs_t *facs; -#if CONFIG_HAVE_ACPI_SLIC - acpi_header_t *slic; -#endif - acpi_header_t *ssdt; - acpi_header_t *dsdt; - - current = fw_cfg_acpi_tables(start); - if (current) - return current; - - current = start; - - /* Align ACPI tables to 16byte */ - ALIGN_CURRENT; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - ALIGN_CURRENT; - xsdt = (acpi_xsdt_t *) current; - current += sizeof(acpi_xsdt_t); - ALIGN_CURRENT; - - /* clear all table memory */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, xsdt); - acpi_write_rsdt(rsdt); - acpi_write_xsdt(xsdt); - - /* - * We explicitly add these tables later on: - */ - printk(BIOS_DEBUG, "ACPI: * HPET\n"); - - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - ALIGN_CURRENT; - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); - - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, madt); - - printk(BIOS_DEBUG, "ACPI: * MCFG\n"); - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, mcfg); - - printk(BIOS_DEBUG, "ACPI: * FACS\n"); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - ALIGN_CURRENT; - acpi_create_facs(facs); - - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - - ALIGN_CURRENT; - - /* We patched up the DSDT, so we need to recalculate the checksum */ - dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, - dsdt->length); - -#if CONFIG_HAVE_ACPI_SLIC - printk(BIOS_DEBUG, "ACPI: * SLIC\n"); - slic = (acpi_header_t *)current; - current += acpi_create_slic(current); - ALIGN_CURRENT; - acpi_add_table(rsdp, slic); -#endif - - printk(BIOS_DEBUG, "ACPI: * FADT\n"); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - ALIGN_CURRENT; - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - ALIGN_CURRENT; - - printk(BIOS_DEBUG, "current = %lx\n", current); - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/emulation/qemu-i440fx/board_info.txt b/src/mainboard/emulation/qemu-i440fx/board_info.txt deleted file mode 100644 index 6938d86..0000000 --- a/src/mainboard/emulation/qemu-i440fx/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: emulation -Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu-i440fx/cache_as_ram.inc b/src/mainboard/emulation/qemu-i440fx/cache_as_ram.inc deleted file mode 100644 index ce54c51..0000000 --- a/src/mainboard/emulation/qemu-i440fx/cache_as_ram.inc +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000,2007 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cpu/x86/mtrr.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/post_code.h> -#include <cbmem.h> - -#define CACHE_AS_RAM_SIZE 0x10000 -#define CACHE_AS_RAM_BASE 0xd0000 - -#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) - - /* Save the BIST result. */ - movl %eax, %ebp - -cache_as_ram: - post_code(0x20) - /* Clear the cache memory region. This will also fill up the cache */ - movl $CACHE_AS_RAM_BASE, %esi - movl %esi, %edi - movl $(CACHE_AS_RAM_SIZE / 4), %ecx - // movl $0x23322332, %eax - xorl %eax, %eax - rep stosl - - post_code(0x21) - /* Set up the stack pointer. */ - movl $(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - 4), %eax - movl %eax, %esp - - /* Restore the BIST result. */ - movl %ebp, %eax - movl %esp, %ebp - pushl %eax - -before_romstage: - post_code(0x29) - /* Call romstage.c main function. */ - call main - - post_code(0x30) - -__main: - post_code(POST_PREPARE_RAMSTAGE) - cld /* Clear direction flag. */ - - movl $CONFIG_RAMTOP, %esp - movl %esp, %ebp - call copy_and_run - -.Lhlt: - post_code(POST_DEAD_CODE) - hlt - jmp .Lhlt - diff --git a/src/mainboard/emulation/qemu-i440fx/cmos.layout b/src/mainboard/emulation/qemu-i440fx/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/emulation/qemu-i440fx/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/emulation/qemu-i440fx/devicetree.cb b/src/mainboard/emulation/qemu-i440fx/devicetree.cb deleted file mode 100644 index a4fcef1..0000000 --- a/src/mainboard/emulation/qemu-i440fx/devicetree.cb +++ /dev/null @@ -1,18 +0,0 @@ -chip mainboard/emulation/qemu-i440fx - device cpu_cluster 0 on - chip cpu/qemu-x86 - device lapic 0 on end - end - end - device domain 0 on - device pci 0.0 on end # northbridge (i440fx) - chip southbridge/intel/i82371eb # southbridge - device pci 01.0 on end # ISA bridge - device pci 01.1 on end # IDE - device pci 01.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "gpo" = "0x7fffbbff" - end - end -end diff --git a/src/mainboard/emulation/qemu-i440fx/dsdt.asl b/src/mainboard/emulation/qemu-i440fx/dsdt.asl deleted file mode 100644 index e63d10f..0000000 --- a/src/mainboard/emulation/qemu-i440fx/dsdt.asl +++ /dev/null @@ -1,347 +0,0 @@ -/* - * Bochs/QEMU ACPI DSDT ASL definition - * - * Copyright (c) 2006 Fabrice Bellard - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License version 2 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -DefinitionBlock ( - "dsdt.aml", // Output Filename - "DSDT", // Signature - 0x01, // DSDT Compliance Revision - "CORE", // OEMID - "COREBOOT", // TABLE ID - 0x1 // OEM Revision - ) -{ - -#include "acpi/dbug.asl" - - -/**************************************************************** - * PCI Bus definition - ****************************************************************/ - - Scope(_SB) { - Device(PCI0) { - Name(_HID, EisaId("PNP0A03")) - Name(_ADR, 0x00) - Name(_UID, 1) - } - } - -#include "acpi/pci-crs.asl" -#include "acpi/hpet.asl" - - -/**************************************************************** - * VGA - ****************************************************************/ - - Scope(_SB.PCI0) { - Device(VGA) { - Name(_ADR, 0x00020000) - OperationRegion(PCIC, PCI_Config, Zero, 0x4) - Field(PCIC, DWordAcc, NoLock, Preserve) { - VEND, 32 - } - Method(_S1D, 0, NotSerialized) { - Return (0x00) - } - Method(_S2D, 0, NotSerialized) { - Return (0x00) - } - Method(_S3D, 0, NotSerialized) { - If (LEqual(VEND, 0x1001b36)) { - Return (0x03) // QXL - } Else { - Return (0x00) - } - } - } - } - - -/**************************************************************** - * PIIX4 PM - ****************************************************************/ - - Scope(_SB.PCI0) { - Device(PX13) { - Name(_ADR, 0x00010003) - OperationRegion(P13C, PCI_Config, 0x00, 0xff) - } - } - - -/**************************************************************** - * PIIX3 ISA bridge - ****************************************************************/ - - Scope(_SB.PCI0) { - Device(ISA) { - Name(_ADR, 0x00010000) - - /* PIIX PCI to ISA irq remapping */ - OperationRegion(P40C, PCI_Config, 0x60, 0x04) - - /* enable bits */ - Field(_SB.PCI0.PX13.P13C, AnyAcc, NoLock, Preserve) { - Offset(0x5f), - , 7, - LPEN, 1, // LPT - Offset(0x67), - , 3, - CAEN, 1, // COM1 - , 3, - CBEN, 1, // COM2 - } - Name(FDEN, 1) - } - } - -#include "acpi/isa.asl" - - -/**************************************************************** - * PCI hotplug - ****************************************************************/ - - Scope(_SB.PCI0) { - OperationRegion(PCST, SystemIO, 0xae00, 0x08) - Field(PCST, DWordAcc, NoLock, WriteAsZeros) { - PCIU, 32, - PCID, 32, - } - - OperationRegion(SEJ, SystemIO, 0xae08, 0x04) - Field(SEJ, DWordAcc, NoLock, WriteAsZeros) { - B0EJ, 32, - } - - /* Methods called by bulk generated PCI devices below */ - - /* Methods called by hotplug devices */ - Method(PCEJ, 1, NotSerialized) { - // _EJ0 method - eject callback - Store(ShiftLeft(1, Arg0), B0EJ) - Return (0x0) - } - - /* Hotplug notification method supplied by SSDT */ - External(_SB.PCI0.PCNT, MethodObj) - - /* PCI hotplug notify method */ - Method(PCNF, 0) { - // Local0 = iterator - Store(Zero, Local0) - While (LLess(Local0, 31)) { - Increment(Local0) - If (And(PCIU, ShiftLeft(1, Local0))) { - PCNT(Local0, 1) - } - If (And(PCID, ShiftLeft(1, Local0))) { - PCNT(Local0, 3) - } - } - } - } - - -/**************************************************************** - * PCI IRQs - ****************************************************************/ - - Scope(_SB) { - Scope(PCI0) { - Name(_PRT, Package() { - /* PCI IRQ routing table, example from ACPI 2.0a specification, - section 6.2.8.1 */ - /* Note: we provide the same info as the PCI routing - table of the Bochs BIOS */ - -#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \ - Package() { nr##ffff, 0, lnk0, 0 }, \ - Package() { nr##ffff, 1, lnk1, 0 }, \ - Package() { nr##ffff, 2, lnk2, 0 }, \ - Package() { nr##ffff, 3, lnk3, 0 } - -#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC) -#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD) -#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA) -#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB) - - prt_slot0(0x0000), - /* Device 1 is power mgmt device, and can only use irq 9 */ - prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD), - prt_slot2(0x0002), - prt_slot3(0x0003), - prt_slot0(0x0004), - prt_slot1(0x0005), - prt_slot2(0x0006), - prt_slot3(0x0007), - prt_slot0(0x0008), - prt_slot1(0x0009), - prt_slot2(0x000a), - prt_slot3(0x000b), - prt_slot0(0x000c), - prt_slot1(0x000d), - prt_slot2(0x000e), - prt_slot3(0x000f), - prt_slot0(0x0010), - prt_slot1(0x0011), - prt_slot2(0x0012), - prt_slot3(0x0013), - prt_slot0(0x0014), - prt_slot1(0x0015), - prt_slot2(0x0016), - prt_slot3(0x0017), - prt_slot0(0x0018), - prt_slot1(0x0019), - prt_slot2(0x001a), - prt_slot3(0x001b), - prt_slot0(0x001c), - prt_slot1(0x001d), - prt_slot2(0x001e), - prt_slot3(0x001f), - }) - } - - Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) { - PRQ0, 8, - PRQ1, 8, - PRQ2, 8, - PRQ3, 8 - } - - Method(IQST, 1, NotSerialized) { - // _STA method - get status - If (And(0x80, Arg0)) { - Return (0x09) - } - Return (0x0B) - } - Method(IQCR, 1, NotSerialized) { - // _CRS method - get current settings - Name(PRR0, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 0 } - }) - CreateDWordField(PRR0, 0x05, PRRI) - If (LLess(Arg0, 0x80)) { - Store(Arg0, PRRI) - } - Return (PRR0) - } - -#define define_link(link, uid, reg) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - 5, 10, 11 \ - } \ - }) \ - Method(_STA, 0, NotSerialized) { \ - Return (IQST(reg)) \ - } \ - Method(_DIS, 0, NotSerialized) { \ - Or(reg, 0x80, reg) \ - } \ - Method(_CRS, 0, NotSerialized) { \ - Return (IQCR(reg)) \ - } \ - Method(_SRS, 1, NotSerialized) { \ - CreateDWordField(Arg0, 0x05, PRRI) \ - Store(PRRI, reg) \ - } \ - } - - define_link(LNKA, 0, PRQ0) - define_link(LNKB, 1, PRQ1) - define_link(LNKC, 2, PRQ2) - define_link(LNKD, 3, PRQ3) - - Device(LNKS) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - Name(_PRS, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 9 } - }) - - // The SCI cannot be disabled and is always attached to GSI 9, - // so these are no-ops. We only need this link to override the - // polarity to active high and match the content of the MADT. - Method(_STA, 0, NotSerialized) { Return (0x0b) } - Method(_DIS, 0, NotSerialized) { } - Method(_CRS, 0, NotSerialized) { Return (_PRS) } - Method(_SRS, 1, NotSerialized) { } - } - } - -#if 0 -#include "acpi/cpu-hotplug.asl" -#endif - - -/**************************************************************** - * General purpose events - ****************************************************************/ - - Scope(_GPE) { - Name(_HID, "ACPI0006") - - Method(_L00) { - } - Method(_E01) { -#if 0 - // PCI hotplug event - _SB.PCI0.PCNF() -#endif - } - Method(_E02) { -#if 0 - // CPU hotplug event - _SB.PRSC() -#endif - } - Method(_L03) { - } - Method(_L04) { - } - Method(_L05) { - } - Method(_L06) { - } - Method(_L07) { - } - Method(_L08) { - } - Method(_L09) { - } - Method(_L0A) { - } - Method(_L0B) { - } - Method(_L0C) { - } - Method(_L0D) { - } - Method(_L0E) { - } - Method(_L0F) { - } - } -} diff --git a/src/mainboard/emulation/qemu-i440fx/fw_cfg.c b/src/mainboard/emulation/qemu-i440fx/fw_cfg.c deleted file mode 100644 index 44256be..0000000 --- a/src/mainboard/emulation/qemu-i440fx/fw_cfg.c +++ /dev/null @@ -1,393 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <swab.h> -#include <smbios.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/acpigen.h> - -#include "fw_cfg.h" -#include "fw_cfg_if.h" - -#define FW_CFG_PORT_CTL 0x0510 -#define FW_CFG_PORT_DATA 0x0511 - -static unsigned char fw_cfg_detected = 0xff; -static FWCfgFiles *fw_files; - -static int fw_cfg_present(void) -{ - static const char qsig[] = "QEMU"; - unsigned char sig[4]; - - if (fw_cfg_detected == 0xff) { - fw_cfg_get(FW_CFG_SIGNATURE, sig, sizeof(sig)); - fw_cfg_detected = (memcmp(sig, qsig, 4) == 0) ? 1 : 0; - printk(BIOS_INFO, "QEMU: firmware config interface %s\n", - fw_cfg_detected ? "detected" : "not found"); - } - return fw_cfg_detected; -} - -void fw_cfg_get(int entry, void *dst, int dstlen) -{ - outw(entry, FW_CFG_PORT_CTL); - insb(FW_CFG_PORT_DATA, dst, dstlen); -} - -static void fw_cfg_init_file(void) -{ - u32 i, size, count = 0; - - if (fw_files != NULL) - return; - - fw_cfg_get(FW_CFG_FILE_DIR, &count, sizeof(count)); - count = swab32(count); - size = count * sizeof(FWCfgFile) + sizeof(count); - printk(BIOS_DEBUG, "QEMU: %d files in fw_cfg\n", count); - fw_files = malloc(size); - fw_cfg_get(FW_CFG_FILE_DIR, fw_files, size); - fw_files->count = swab32(fw_files->count); - for (i = 0; i < count; i++) { - fw_files->f[i].size = swab32(fw_files->f[i].size); - fw_files->f[i].select = swab16(fw_files->f[i].select); - printk(BIOS_DEBUG, "QEMU: %s [size=%d]\n", - fw_files->f[i].name, fw_files->f[i].size); - } -} - -static FWCfgFile *fw_cfg_find_file(const char *name) -{ - int i; - - fw_cfg_init_file(); - for (i = 0; i < fw_files->count; i++) - if (strcmp(fw_files->f[i].name, name) == 0) - return fw_files->f + i; - return NULL; -} - -int fw_cfg_check_file(const char *name) -{ - FWCfgFile *file; - - if (!fw_cfg_present()) - return -1; - file = fw_cfg_find_file(name); - if (!file) - return -1; - return file->size; -} - -void fw_cfg_load_file(const char *name, void *dst) -{ - FWCfgFile *file; - - if (!fw_cfg_present()) - return; - file = fw_cfg_find_file(name); - if (!file) - return; - fw_cfg_get(file->select, dst, file->size); -} - -int fw_cfg_max_cpus(void) -{ - unsigned short max_cpus; - - if (!fw_cfg_present()) - return -1; - - fw_cfg_get(FW_CFG_MAX_CPUS, &max_cpus, sizeof(max_cpus)); - return max_cpus; -} - -/* ---------------------------------------------------------------------- */ - -/* - * Starting with release 1.7 qemu provides acpi tables via fw_cfg. - * Main advantage is that new (virtual) hardware which needs acpi - * support JustWorks[tm] without having to patch & update the firmware - * (seabios, coreboot, ...) accordingly. - * - * Qemu provides a etc/table-loader file with instructions for the - * firmware: - * - A "load" instruction to fetch acpi data from fw_cfg. - * - A "pointer" instruction to patch a pointer. This is needed to - * get table-to-table references right, it is basically a - * primitive dynamic linker for acpi tables. - * - A "checksum" instruction to generate acpi table checksums. - * - * If a etc/table-loader file is found we'll go try loading the acpi - * tables from fw_cfg, otherwise we'll fallback to the acpi tables - * compiled in. - */ - -#define BIOS_LINKER_LOADER_FILESZ 56 - -struct BiosLinkerLoaderEntry { - uint32_t command; - union { - /* - * COMMAND_ALLOCATE - allocate a table from @alloc.file - * subject to @alloc.align alignment (must be power of 2) - * and @alloc.zone (can be HIGH or FSEG) requirements. - * - * Must appear exactly once for each file, and before - * this file is referenced by any other command. - */ - struct { - char file[BIOS_LINKER_LOADER_FILESZ]; - uint32_t align; - uint8_t zone; - } alloc; - - /* - * COMMAND_ADD_POINTER - patch the table (originating from - * @dest_file) at @pointer.offset, by adding a pointer to the table - * originating from @src_file. 1,2,4 or 8 byte unsigned - * addition is used depending on @pointer.size. - */ - struct { - char dest_file[BIOS_LINKER_LOADER_FILESZ]; - char src_file[BIOS_LINKER_LOADER_FILESZ]; - uint32_t offset; - uint8_t size; - } pointer; - - /* - * COMMAND_ADD_CHECKSUM - calculate checksum of the range specified by - * @cksum_start and @cksum_length fields, - * and then add the value at @cksum.offset. - * Checksum simply sums -X for each byte X in the range - * using 8-bit math. - */ - struct { - char file[BIOS_LINKER_LOADER_FILESZ]; - uint32_t offset; - uint32_t start; - uint32_t length; - } cksum; - - /* padding */ - char pad[124]; - }; -} __attribute__((packed)); -typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry; - -enum { - BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1, - BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2, - BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3, -}; - -enum { - BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1, - BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2, -}; - -unsigned long fw_cfg_acpi_tables(unsigned long start) -{ - BiosLinkerLoaderEntry *s; - unsigned long *addrs, current; - uint32_t *ptr4; - uint64_t *ptr8; - int rc, i, j, src, dst, max; - - rc = fw_cfg_check_file("etc/table-loader"); - if (rc < 0) - return 0; - - printk(BIOS_DEBUG, "QEMU: found acpi tables in fw_cfg.\n"); - - max = rc / sizeof(*s); - s = malloc(rc); - addrs = malloc(max * sizeof(*addrs)); - fw_cfg_load_file("etc/table-loader", s); - - current = start; - for (i = 0; i < max && s[i].command != 0; i++) { - switch (s[i].command) { - case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: - current = ALIGN(current, s[i].alloc.align); - rc = fw_cfg_check_file(s[i].alloc.file); - if (rc < 0) - goto err; - printk(BIOS_DEBUG, "QEMU: loading "%s" to 0x%lx (len %d)\n", - s[i].alloc.file, current, rc); - fw_cfg_load_file(s[i].alloc.file, (void*)current); - addrs[i] = current; - current += rc; - break; - - case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: - src = -1; dst = -1; - for (j = 0; j < i; j++) { - if (s[j].command != BIOS_LINKER_LOADER_COMMAND_ALLOCATE) - continue; - if (strcmp(s[j].alloc.file, s[i].pointer.dest_file) == 0) - dst = j; - if (strcmp(s[j].alloc.file, s[i].pointer.src_file) == 0) - src = j; - } - if (src == -1 || dst == -1) - goto err; - - switch (s[i].pointer.size) { - case 4: - ptr4 = (uint32_t*)(addrs[dst] + s[i].pointer.offset); - *ptr4 += addrs[src]; - break; - - case 8: - ptr8 = (uint64_t*)(addrs[dst] + s[i].pointer.offset); - *ptr8 += addrs[src]; - break; - - default: - /* - * Should not happen. acpi knows 1 and 2 byte ptrs - * too, but we are operating with 32bit offsets which - * would simply not fit in there ... - */ - printk(BIOS_DEBUG, "QEMU: acpi: unimplemented ptr size %d\n", - s[i].pointer.size); - goto err; - } - break; - - case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: - dst = -1; - for (j = 0; j < i; j++) { - if (s[j].command != BIOS_LINKER_LOADER_COMMAND_ALLOCATE) - continue; - if (strcmp(s[j].alloc.file, s[i].cksum.file) == 0) - dst = j; - } - if (dst == -1) - goto err; - - ptr4 = (uint32_t*)(addrs[dst] + s[i].cksum.offset); - *ptr4 = 0; - *ptr4 = acpi_checksum((void *)(addrs[dst] + s[i].cksum.start), - s[i].cksum.length); - break; - - default: - printk(BIOS_DEBUG, "QEMU: acpi: unknown script cmd 0x%x @ %p\n", - s[i].command, s+i); - goto err; - }; - } - - printk(BIOS_DEBUG, "QEMU: loaded acpi tables from fw_cfg.\n"); - free(s); - free(addrs); - return ALIGN(current, 16); - -err: - printk(BIOS_DEBUG, "QEMU: loading acpi tables from fw_cfg failed.\n"); - free(s); - free(addrs); - return 0; -} - -/* ---------------------------------------------------------------------- */ -/* pick up smbios information from fw_cfg */ - -static const char *type1_manufacturer; -static const char *type1_product_name; -static const char *type1_version; -static const char *type1_serial_number; -static const char *type1_family; -static u8 type1_uuid[16]; - -static void fw_cfg_smbios_init(void) -{ - static int done = 0; - uint16_t i, count = 0; - FwCfgSmbios entry; - char *buf; - - if (done) - return; - done = 1; - - fw_cfg_get(FW_CFG_SMBIOS_ENTRIES, &count, sizeof(count)); - for (i = 0; i < count; i++) { - insb(FW_CFG_PORT_DATA, &entry, sizeof(entry)); - buf = malloc(entry.length - sizeof(entry)); - insb(FW_CFG_PORT_DATA, buf, entry.length - sizeof(entry)); - if (entry.headertype == SMBIOS_FIELD_ENTRY && - entry.tabletype == 1) { - switch (entry.fieldoffset) { - case offsetof(struct smbios_type1, manufacturer): - type1_manufacturer = strdup(buf); - break; - case offsetof(struct smbios_type1, product_name): - type1_product_name = strdup(buf); - break; - case offsetof(struct smbios_type1, version): - type1_version = strdup(buf); - break; - case offsetof(struct smbios_type1, serial_number): - type1_serial_number = strdup(buf); - break; - case offsetof(struct smbios_type1, family): - type1_family = strdup(buf); - break; - case offsetof(struct smbios_type1, uuid): - memcpy(type1_uuid, buf, 16); - break; - } - } - free(buf); - } -} - -const char *smbios_mainboard_manufacturer(void) -{ - fw_cfg_smbios_init(); - return type1_manufacturer ?: CONFIG_MAINBOARD_SMBIOS_MANUFACTURER; -} - -const char *smbios_mainboard_product_name(void) -{ - fw_cfg_smbios_init(); - return type1_product_name ?: CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME; -} - -const char *smbios_mainboard_version(void) -{ - fw_cfg_smbios_init(); - return type1_version ?: CONFIG_MAINBOARD_VERSION; -} - -const char *smbios_mainboard_serial_number(void) -{ - fw_cfg_smbios_init(); - return type1_serial_number ?: CONFIG_MAINBOARD_SERIAL_NUMBER; -} - -void smbios_mainboard_set_uuid(u8 *uuid) -{ - fw_cfg_smbios_init(); - memcpy(uuid, type1_uuid, 16); -} diff --git a/src/mainboard/emulation/qemu-i440fx/fw_cfg.h b/src/mainboard/emulation/qemu-i440fx/fw_cfg.h deleted file mode 100644 index 5ab024f..0000000 --- a/src/mainboard/emulation/qemu-i440fx/fw_cfg.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -void fw_cfg_get(int entry, void *dst, int dstlen); -int fw_cfg_check_file(const char *name); -void fw_cfg_load_file(const char *name, void *dst); -int fw_cfg_max_cpus(void); -unsigned long fw_cfg_acpi_tables(unsigned long start); diff --git a/src/mainboard/emulation/qemu-i440fx/fw_cfg_if.h b/src/mainboard/emulation/qemu-i440fx/fw_cfg_if.h deleted file mode 100644 index 2d27245..0000000 --- a/src/mainboard/emulation/qemu-i440fx/fw_cfg_if.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This are the qemu firmware config interface defines and structs. - * Copyed over from qemu soure tree, include/hw/nvram/fw_cfg.h - */ - -#define FW_CFG_SIGNATURE 0x00 -#define FW_CFG_ID 0x01 -#define FW_CFG_UUID 0x02 -#define FW_CFG_RAM_SIZE 0x03 -#define FW_CFG_NOGRAPHIC 0x04 -#define FW_CFG_NB_CPUS 0x05 -#define FW_CFG_MACHINE_ID 0x06 -#define FW_CFG_KERNEL_ADDR 0x07 -#define FW_CFG_KERNEL_SIZE 0x08 -#define FW_CFG_KERNEL_CMDLINE 0x09 -#define FW_CFG_INITRD_ADDR 0x0a -#define FW_CFG_INITRD_SIZE 0x0b -#define FW_CFG_BOOT_DEVICE 0x0c -#define FW_CFG_NUMA 0x0d -#define FW_CFG_BOOT_MENU 0x0e -#define FW_CFG_MAX_CPUS 0x0f -#define FW_CFG_KERNEL_ENTRY 0x10 -#define FW_CFG_KERNEL_DATA 0x11 -#define FW_CFG_INITRD_DATA 0x12 -#define FW_CFG_CMDLINE_ADDR 0x13 -#define FW_CFG_CMDLINE_SIZE 0x14 -#define FW_CFG_CMDLINE_DATA 0x15 -#define FW_CFG_SETUP_ADDR 0x16 -#define FW_CFG_SETUP_SIZE 0x17 -#define FW_CFG_SETUP_DATA 0x18 -#define FW_CFG_FILE_DIR 0x19 - -#define FW_CFG_FILE_FIRST 0x20 -#define FW_CFG_FILE_SLOTS 0x10 -#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS) - -#define FW_CFG_WRITE_CHANNEL 0x4000 -#define FW_CFG_ARCH_LOCAL 0x8000 -#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) - -#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0) -#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1) -#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2) -#define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3) -#define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) - -#define FW_CFG_INVALID 0xffff - -typedef struct FWCfgFile { - uint32_t size; /* file size */ - uint16_t select; /* write this to 0x510 to read it */ - uint16_t reserved; - char name[56]; -} FWCfgFile; - -typedef struct FWCfgFiles { - uint32_t count; - FWCfgFile f[]; -} FWCfgFiles; - -typedef struct FwCfgE820Entry { - uint64_t address; - uint64_t length; - uint32_t type; -} FwCfgE820Entry __attribute((__aligned__(4))); - - -#define SMBIOS_FIELD_ENTRY 0 -#define SMBIOS_TABLE_ENTRY 1 - -typedef struct FwCfgSmbios { - uint16_t length; - uint8_t headertype; - uint8_t tabletype; - uint16_t fieldoffset; -} FwCfgSmbios; diff --git a/src/mainboard/emulation/qemu-i440fx/irq_tables.c b/src/mainboard/emulation/qemu-i440fx/irq_tables.c deleted file mode 100644 index 21eeabf..0000000 --- a/src/mainboard/emulation/qemu-i440fx/irq_tables.c +++ /dev/null @@ -1,35 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x01<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x7, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x01<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x0, 0x0}, - {0x00,(0x02<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x1, 0x0}, - {0x00,(0x03<<3)|0x0, {{0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0x0def8}}, 0x2, 0x0}, - {0x00,(0x04<<3)|0x0, {{0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0x0def8}}, 0x3, 0x0}, - {0x00,(0x05<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x4, 0x0}, - {0x00,(0x06<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x5, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/emulation/qemu-i440fx/mainboard.c b/src/mainboard/emulation/qemu-i440fx/mainboard.c deleted file mode 100644 index a8a61c4..0000000 --- a/src/mainboard/emulation/qemu-i440fx/mainboard.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org - * Copyright (C) 2010 Kevin O'Connor kevin@koconnor.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <pc80/keyboard.h> -#include <arch/io.h> - -static const unsigned char qemu_i440fx_irqs[] = { - 11, 10, 10, 11, - 11, 10, 10, 11, -}; - -static void qemu_nb_init(device_t dev) -{ - /* Map memory at 0xc0000 - 0xfffff */ - int i; - uint8_t v = pci_read_config8(dev, 0x59); - v |= 0x30; - pci_write_config8(dev, 0x59, v); - for (i=0; i<6; i++) - pci_write_config8(dev, 0x5a + i, 0x33); - - /* This sneaked in here, because Qemu does not - * emulate a SuperIO chip - */ - pc_keyboard_init(); - - /* setup IRQ routing */ - for (i = 0; i < 32; i++) - pci_assign_irqs(0, i, qemu_i440fx_irqs + (i % 4)); -} - -static struct device_operations nb_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = qemu_nb_init, - .ops_pci = 0, -}; - -static const struct pci_driver nb_driver __pci_driver = { - .ops = &nb_operations, - .vendor = 0x8086, - .device = 0x1237, -}; diff --git a/src/mainboard/emulation/qemu-i440fx/memory.c b/src/mainboard/emulation/qemu-i440fx/memory.c deleted file mode 100644 index a189d75..0000000 --- a/src/mainboard/emulation/qemu-i440fx/memory.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <cbmem.h> - -#define CMOS_ADDR_PORT 0x70 -#define CMOS_DATA_PORT 0x71 - -#define HIGH_RAM_ADDR 0x35 -#define LOW_RAM_ADDR 0x34 - -#define HIGH_HIGHRAM_ADDR 0x5d -#define MID_HIGHRAM_ADDR 0x5c -#define LOW_HIGHRAM_ADDR 0x5b - -static unsigned long qemu_get_memory_size(void) -{ - unsigned long tomk; - outb (HIGH_RAM_ADDR, CMOS_ADDR_PORT); - tomk = ((unsigned long) inb(CMOS_DATA_PORT)) << 14; - outb (LOW_RAM_ADDR, CMOS_ADDR_PORT); - tomk |= ((unsigned long) inb(CMOS_DATA_PORT)) << 6; - tomk += 16 * 1024; - return tomk; -} - -unsigned long get_top_of_ram(void) -{ - return qemu_get_memory_size() * 1024; -} diff --git a/src/mainboard/emulation/qemu-i440fx/northbridge.c b/src/mainboard/emulation/qemu-i440fx/northbridge.c deleted file mode 100644 index 0f8c0c2..0000000 --- a/src/mainboard/emulation/qemu-i440fx/northbridge.c +++ /dev/null @@ -1,296 +0,0 @@ -#include <console/console.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic_def.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <stdint.h> -#include <device/device.h> -#include <device/pci.h> -#include <stdlib.h> -#include <string.h> -#include <delay.h> -#include <smbios.h> -#include <cbmem.h> - -#include "fw_cfg.h" -#include "fw_cfg_if.h" - -#include "memory.c" - -static unsigned long qemu_get_high_memory_size(void) -{ - unsigned long high; - outb (HIGH_HIGHRAM_ADDR, CMOS_ADDR_PORT); - high = ((unsigned long) inb(CMOS_DATA_PORT)) << 22; - outb (MID_HIGHRAM_ADDR, CMOS_ADDR_PORT); - high |= ((unsigned long) inb(CMOS_DATA_PORT)) << 14; - outb (LOW_HIGHRAM_ADDR, CMOS_ADDR_PORT); - high |= ((unsigned long) inb(CMOS_DATA_PORT)) << 6; - return high; -} - -static void qemu_reserve_ports(struct device *dev, unsigned int idx, - unsigned int base, unsigned int size, - const char *name) -{ - unsigned int end = base + size -1; - struct resource *res; - - printk(BIOS_DEBUG, "QEMU: reserve ioports 0x%04x-0x%04x [%s]\n", - base, end, name); - res = new_resource(dev, idx); - res->base = base; - res->size = size; - res->limit = 0xffff; - res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_STORED | - IORESOURCE_ASSIGNED; -} - -static void cpu_pci_domain_set_resources(device_t dev) -{ - assign_resources(dev->link_list); -} - -static void cpu_pci_domain_read_resources(struct device *dev) -{ - u16 nbid = pci_read_config16(dev_find_slot(0, 0), PCI_DEVICE_ID); - int i440fx = (nbid == 0x1237); - int q35 = (nbid == 0x29c0); - struct resource *res; - unsigned long tomk = 0, high; - int idx = 10; - int size; - - pci_domain_read_resources(dev); - - size = fw_cfg_check_file("etc/e820"); - if (size > 0) { - /* supported by qemu 1.7+ */ - FwCfgE820Entry *list = malloc(size); - int i; - fw_cfg_load_file("etc/e820", list); - for (i = 0; i < size/sizeof(*list); i++) { - switch (list[i].type) { - case 1: /* ram */ - printk(BIOS_DEBUG, "QEMU: e820/ram: 0x%08llx +0x%08llx\n", - list[i].address, list[i].length); - if (list[i].address == 0) { - tomk = list[i].length / 1024; - ram_resource(dev, idx++, 0, 640); - ram_resource(dev, idx++, 768, tomk - 768); - } else { - ram_resource(dev, idx++, - list[i].address / 1024, - list[i].length / 1024); - } - break; - case 2: /* reserved */ - printk(BIOS_DEBUG, "QEMU: e820/res: 0x%08llx +0x%08llx\n", - list[i].address, list[i].length); - res = new_resource(dev, idx++); - res->base = list[i].address; - res->size = list[i].length; - res->limit = 0xffffffff; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - break; - default: - /* skip unknown */ - break; - } - } - free(list); - } - - if (!tomk) { - /* qemu older than 1.7, or reading etc/e820 failed. Fallback to cmos. */ - tomk = qemu_get_memory_size(); - high = qemu_get_high_memory_size(); - printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM below 4G.\n", tomk / 1024); - printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM above 4G.\n", high / 1024); - - /* Report the memory regions. */ - ram_resource(dev, idx++, 0, 640); - ram_resource(dev, idx++, 768, tomk - 768); - if (high) - ram_resource(dev, idx++, 4 * 1024 * 1024, high); - } - - /* Reserve I/O ports used by QEMU */ - qemu_reserve_ports(dev, idx++, 0x0510, 0x02, "firmware-config"); - qemu_reserve_ports(dev, idx++, 0x5658, 0x01, "vmware-port"); - if (i440fx) { - qemu_reserve_ports(dev, idx++, 0xae00, 0x10, "pci-hotplug"); - qemu_reserve_ports(dev, idx++, 0xaf00, 0x20, "cpu-hotplug"); - qemu_reserve_ports(dev, idx++, 0xafe0, 0x04, "piix4-gpe0"); - } - if (inb(CONFIG_CONSOLE_QEMU_DEBUGCON_PORT) == 0xe9) { - qemu_reserve_ports(dev, idx++, CONFIG_CONSOLE_QEMU_DEBUGCON_PORT, 1, - "debugcon"); - } - -#if !CONFIG_DYNAMIC_CBMEM - set_top_of_ram(tomk * 1024); -#endif - - if (q35 && ((tomk * 1024) < 0xb0000000)) { - /* - * Reserve the region between top-of-ram and the - * mmconf xbar (ar 0xb0000000), so coreboot doesn't - * place pci bars there. The region isn't declared as - * pci io window in the acpi tables (_SB.PCI0._CRS). - */ - res = new_resource(dev, idx++); - res->base = tomk * 1024; - res->size = 0xb0000000 - tomk * 1024; - res->limit = 0xffffffff; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - } - - if (i440fx) { - /* Reserve space for the IOAPIC. This should be in - * the southbridge, but I couldn't tell which device - * to put it in. */ - res = new_resource(dev, 2); - res->base = IO_APIC_ADDR; - res->size = 0x100000UL; - res->limit = 0xffffffffUL; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | - IORESOURCE_STORED | IORESOURCE_ASSIGNED; - } - - /* Reserve space for the LAPIC. There's one in every processor, but - * the space only needs to be reserved once, so we do it here. */ - res = new_resource(dev, 3); - res->base = LOCAL_APIC_ADDR; - res->size = 0x10000UL; - res->limit = 0xffffffffUL; - res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | - IORESOURCE_ASSIGNED; -} - -#if CONFIG_GENERATE_SMBIOS_TABLES -static int qemu_get_smbios_data16(int handle, unsigned long *current) -{ - struct smbios_type16 *t = (struct smbios_type16 *)*current; - int len = sizeof(struct smbios_type16); - - memset(t, 0, sizeof(struct smbios_type16)); - t->type = SMBIOS_PHYS_MEMORY_ARRAY; - t->handle = handle; - t->length = len - 2; - t->location = 3; /* Location: System Board */ - t->use = 3; /* System memory */ - t->memory_error_correction = 3; /* No error correction */ - t->maximum_capacity = qemu_get_memory_size(); - *current += len; - return len; -} - -static int qemu_get_smbios_data17(int handle, int parent_handle, unsigned long *current) -{ - struct smbios_type17 *t = (struct smbios_type17 *)*current; - int len; - - memset(t, 0, sizeof(struct smbios_type17)); - t->type = SMBIOS_MEMORY_DEVICE; - t->handle = handle; - t->phys_memory_array_handle = parent_handle; - t->length = sizeof(struct smbios_type17) - 2; - t->size = qemu_get_memory_size() / 1024; - t->data_width = 64; - t->total_width = 64; - t->form_factor = 9; /* DIMM */ - t->device_locator = smbios_add_string(t->eos, "Virtual"); - t->memory_type = 0x12; /* DDR */ - t->type_detail = 0x80; /* Synchronous */ - t->speed = 200; - t->clock_speed = 200; - t->manufacturer = smbios_add_string(t->eos, CONFIG_MAINBOARD_VENDOR); - len = t->length + smbios_string_table_len(t->eos); - *current += len; - return len; -} - -static int qemu_get_smbios_data(device_t dev, int *handle, unsigned long *current) -{ - int len; - len = qemu_get_smbios_data16(*handle, current); - len += qemu_get_smbios_data17(*handle+1, *handle, current); - *handle += 2; - return len; -} -#endif -static struct device_operations pci_domain_ops = { - .read_resources = cpu_pci_domain_read_resources, - .set_resources = cpu_pci_domain_set_resources, - .enable_resources = NULL, - .init = NULL, - .scan_bus = pci_domain_scan_bus, - .ops_pci_bus = pci_bus_default_ops, -#if CONFIG_GENERATE_SMBIOS_TABLES - .get_smbios_data = qemu_get_smbios_data, -#endif -}; - -static void cpu_bus_init(device_t dev) -{ - initialize_cpus(dev->link_list); -} - -static unsigned int cpu_bus_scan(device_t bus, unsigned int max) -{ - int max_cpus = fw_cfg_max_cpus(); - device_t cpu; - int i; - - if (max_cpus < 0) - return 0; - - /* - * TODO: This only handles the simple "qemu -smp $nr" case - * correctly. qemu also allows to specify the number of - * cores, threads & sockets. - */ - printk(BIOS_INFO, "QEMU: max_cpus is %d\n", max_cpus); - for (i = 0; i < max_cpus; i++) { - cpu = add_cpu_device(bus->link_list, i, 1); - if (cpu) - set_cpu_topology(cpu, 1, 0, i, 0); - } - return max_cpus; -} - -static void cpu_bus_noop(device_t dev) -{ -} - -static struct device_operations cpu_bus_ops = { - .read_resources = cpu_bus_noop, - .set_resources = cpu_bus_noop, - .enable_resources = cpu_bus_noop, - .init = cpu_bus_init, - .scan_bus = cpu_bus_scan, -}; - -static void northbridge_enable(struct device *dev) -{ - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -} - -struct chip_operations mainboard_emulation_qemu_i440fx_ops = { - CHIP_NAME("QEMU Northbridge i440fx") - .enable_dev = northbridge_enable, -}; - -struct chip_operations mainboard_emulation_qemu_q35_ops = { - CHIP_NAME("QEMU Northbridge q35") - .enable_dev = northbridge_enable, -}; diff --git a/src/mainboard/emulation/qemu-i440fx/romstage.c b/src/mainboard/emulation/qemu-i440fx/romstage.c deleted file mode 100644 index 6c17645..0000000 --- a/src/mainboard/emulation/qemu-i440fx/romstage.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Stefan Reinauer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <timestamp.h> -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" - -#include "memory.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int cbmem_was_initted; - - /* init_timer(); */ - post_code(0x05); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - //print_pci_devices(); - //dump_pci_devices(); - - cbmem_was_initted = !cbmem_recovery(0); - - timestamp_init(rdtsc()); - timestamp_add_now(TS_START_ROMSTAGE); - -} diff --git a/src/mainboard/emulation/qemu-q35/Kconfig b/src/mainboard/emulation/qemu-q35/Kconfig deleted file mode 100644 index 3949937..0000000 --- a/src/mainboard/emulation/qemu-q35/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -if BOARD_EMULATION_QEMU_X86_Q35 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_QEMU_X86 - select SOUTHBRIDGE_INTEL_I82801IX - select IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS - select MMCONF_SUPPORT - select MMCONF_SUPPORT_DEFAULT -# select HAVE_OPTION_TABLE -# select HAVE_PIRQ_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_256 - select DYNAMIC_CBMEM - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_DO_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - -config MAINBOARD_DIR - string - default emulation/qemu-q35 - -config MAINBOARD_PART_NUMBER - string - default "QEMU x86 q35/ich9" - -config BOOTBLOCK_MAINBOARD_INIT - string - default "mainboard/emulation/qemu-q35/bootblock.c" - -#config IRQ_SLOT_COUNT -# int -# default 6 - -config MMCONF_BASE_ADDRESS - hex - default 0xb0000000 - -config DCACHE_RAM_BASE - hex - default 0xd0000 - -config DCACHE_RAM_SIZE - hex - default 0x10000 - -endif # BOARD_EMULATION_QEMU_X86_Q35 diff --git a/src/mainboard/emulation/qemu-q35/Makefile.inc b/src/mainboard/emulation/qemu-q35/Makefile.inc deleted file mode 100644 index 0a0f869..0000000 --- a/src/mainboard/emulation/qemu-q35/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ -cpu_incs += $(src)/mainboard/emulation/qemu-i440fx/cache_as_ram.inc -ramstage-y += ../qemu-i440fx/northbridge.c -ramstage-y += ../qemu-i440fx/fw_cfg.c diff --git a/src/mainboard/emulation/qemu-q35/acpi_tables.c b/src/mainboard/emulation/qemu-q35/acpi_tables.c deleted file mode 100644 index 4e79b2c..0000000 --- a/src/mainboard/emulation/qemu-q35/acpi_tables.c +++ /dev/null @@ -1,345 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> - -#include "../qemu-i440fx/fw_cfg.h" - -extern const unsigned char AmlCode[]; -#if CONFIG_HAVE_ACPI_SLIC -unsigned long acpi_create_slic(unsigned long current); -#endif - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 0x00; - fadt->preferred_pm_profile = PM_MOBILE; - fadt->sci_int = 0x9; - fadt->smi_cmd = 0; - fadt->acpi_enable = 0; - fadt->acpi_disable = 0; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; /* Upper word is reserved and - Linux complains about 32 bit. */ - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 0x39; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x32; - fadt->iapc_boot_arch = 0x00; - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_DOCKING_SUPPORTED | ACPI_FADT_RESET_REGISTER | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - fadt->reset_value = 0x06; - - fadt->x_firmware_ctl_l = 0; /* Set X_FIRMWARE_CTRL only if FACS is */ - fadt->x_firmware_ctl_h = 0; /* above 4GB. If X_FIRMWARE_CTRL is set, */ - /* then FIRMWARE_CTRL must be zero. */ - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 0; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; /* Upper word is reserved and - Linux complains about 32 bit. */ - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 0; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 0; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - device_t dev; - u32 reg; - - dev = dev_find_device(0x8086, 0x29c0, 0); - if (!dev) - return current; - - reg = pci_read_config32(dev, 0x60); - if ((reg & 0x07) != 0x01) // require enabled + 256MB size - return current; - - current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, - reg & 0xf0000000, 0x0, 0x0, 255); - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -#define ALIGN_CURRENT current = (ALIGN(current, 16)) -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_xsdt_t *xsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_mcfg_t *mcfg; - acpi_fadt_t *fadt; - acpi_facs_t *facs; -#if CONFIG_HAVE_ACPI_SLIC - acpi_header_t *slic; -#endif - acpi_header_t *ssdt; - acpi_header_t *dsdt; - - current = fw_cfg_acpi_tables(start); - if (current) - return current; - - current = start; - - /* Align ACPI tables to 16byte */ - ALIGN_CURRENT; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - ALIGN_CURRENT; - xsdt = (acpi_xsdt_t *) current; - current += sizeof(acpi_xsdt_t); - ALIGN_CURRENT; - - /* clear all table memory */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, xsdt); - acpi_write_rsdt(rsdt); - acpi_write_xsdt(xsdt); - - /* - * We explicitly add these tables later on: - */ - printk(BIOS_DEBUG, "ACPI: * HPET\n"); - - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - ALIGN_CURRENT; - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); - - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, madt); - - printk(BIOS_DEBUG, "ACPI: * MCFG\n"); - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, mcfg); - - printk(BIOS_DEBUG, "ACPI: * FACS\n"); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - ALIGN_CURRENT; - acpi_create_facs(facs); - - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - - ALIGN_CURRENT; - - /* We patched up the DSDT, so we need to recalculate the checksum */ - dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, - dsdt->length); - -#if CONFIG_HAVE_ACPI_SLIC - printk(BIOS_DEBUG, "ACPI: * SLIC\n"); - slic = (acpi_header_t *)current; - current += acpi_create_slic(current); - ALIGN_CURRENT; - acpi_add_table(rsdp, slic); -#endif - - printk(BIOS_DEBUG, "ACPI: * FADT\n"); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - ALIGN_CURRENT; - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - ALIGN_CURRENT; - - printk(BIOS_DEBUG, "current = %lx\n", current); - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/emulation/qemu-q35/board_info.txt b/src/mainboard/emulation/qemu-q35/board_info.txt deleted file mode 100644 index 6938d86..0000000 --- a/src/mainboard/emulation/qemu-q35/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: emulation -Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu-q35/bootblock.c b/src/mainboard/emulation/qemu-q35/bootblock.c deleted file mode 100644 index 939a4e6..0000000 --- a/src/mainboard/emulation/qemu-q35/bootblock.c +++ /dev/null @@ -1,33 +0,0 @@ -#include <arch/io.h> - -/* Just define these here, there is no gm35.h file to include. */ -#define D0F0_PCIEXBAR_LO 0x60 -#define D0F0_PCIEXBAR_HI 0x64 - -static void bootblock_northbridge_init(void) -{ - uint32_t reg; - - /* - * The "io" variant of the config access is explicitly used to - * setup the PCIEXBAR because CONFIG_MMCONF_SUPPORT_DEFAULT is set to - * to true. That way all subsequent non-explicit config accesses use - * MCFG. This code also assumes that bootblock_northbridge_init() is - * the first thing called in the non-asm boot block code. The final - * assumption is that no assembly code is using the - * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config acceses. - * - * The PCIEXBAR is assumed to live in the memory mapped IO space under - * 4GiB. - */ - reg = 0; - pci_io_write_config32(PCI_DEV(0,0,0), D0F0_PCIEXBAR_HI, reg); - reg = CONFIG_MMCONF_BASE_ADDRESS | 1; /* 256MiB - 0-255 buses. */ - pci_io_write_config32(PCI_DEV(0,0,0), D0F0_PCIEXBAR_LO, reg); -} - -static void bootblock_mainboard_init(void) -{ - bootblock_northbridge_init(); - bootblock_southbridge_init(); -} diff --git a/src/mainboard/emulation/qemu-q35/devicetree.cb b/src/mainboard/emulation/qemu-q35/devicetree.cb deleted file mode 100644 index 671a2d6..0000000 --- a/src/mainboard/emulation/qemu-q35/devicetree.cb +++ /dev/null @@ -1,39 +0,0 @@ -chip mainboard/emulation/qemu-q35 - device cpu_cluster 0 on - chip cpu/qemu-x86 - device lapic 0 on end - end - end - device domain 0 on - device pci 0.0 on end # northbridge (q35) - chip southbridge/intel/i82801ix - # present unconditionally - device pci 1f.0 on end # LPC - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus - - # presence depends in qemu config - # (see docs/q35-chipset.cfg in qemu src tree) - device pci 1a.0 on end # UHCI #4 - device pci 1a.1 on end # UHCI #5 - device pci 1a.2 on end # UHCI #6 - device pci 1a.7 on end # EHCI #2 - device pci 1b.0 on end # HD Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 - device pci 1d.0 on end # UHCI #1 - device pci 1d.1 on end # UHCI #2 - device pci 1d.2 on end # UHCI #3 - device pci 1d.7 on end # EHCI #1 - - # not present (not emulated by qemu) - device pci 19.0 off end - device pci 1f.5 off end - device pci 1f.6 off end - end - end -end diff --git a/src/mainboard/emulation/qemu-q35/dsdt.asl b/src/mainboard/emulation/qemu-q35/dsdt.asl deleted file mode 100644 index 0e8da7b..0000000 --- a/src/mainboard/emulation/qemu-q35/dsdt.asl +++ /dev/null @@ -1,454 +0,0 @@ -/* - * Bochs/QEMU ACPI DSDT ASL definition - * - * Copyright (c) 2006 Fabrice Bellard - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License version 2 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -/* - * Copyright (c) 2010 Isaku Yamahata - * yamahata at valinux co jp - * Based on acpi-dsdt.dsl, but heavily modified for q35 chipset. - */ - -DefinitionBlock ( - "dsdt.aml", // Output Filename - "DSDT", // Signature - 0x01, // DSDT Compliance Revision - "CORE", // OEMID - "COREBOOT", // TABLE ID - 0x2 // OEM Revision - ) -{ - -#include "../qemu-i440fx/acpi/dbug.asl" - - Scope(_SB) { - OperationRegion(PCST, SystemIO, 0xae00, 0x0c) - OperationRegion(PCSB, SystemIO, 0xae0c, 0x01) - Field(PCSB, AnyAcc, NoLock, WriteAsZeros) { - PCIB, 8, - } - } - - -/**************************************************************** - * PCI Bus definition - ****************************************************************/ - - Scope(_SB) { - Device(PCI0) { - Name(_HID, EisaId("PNP0A08")) - Name(_CID, EisaId("PNP0A03")) - Name(_ADR, 0x00) - Name(_UID, 1) - - // _OSC: based on sample of ACPI3.0b spec - Name(SUPP, 0) // PCI _OSC Support Field value - Name(CTRL, 0) // PCI _OSC Control Field value - Method(_OSC, 4) { - // Create DWORD-addressable fields from the Capabilities Buffer - CreateDWordField(Arg3, 0, CDW1) - - // Check for proper UUID - If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) { - // Create DWORD-addressable fields from the Capabilities Buffer - CreateDWordField(Arg3, 4, CDW2) - CreateDWordField(Arg3, 8, CDW3) - - // Save Capabilities DWORD2 & 3 - Store(CDW2, SUPP) - Store(CDW3, CTRL) - - // Always allow native PME, AER (no dependencies) - // Never allow SHPC (no SHPC controller in this system) - And(CTRL, 0x1D, CTRL) - -#if 0 // For now, nothing to do - If (Not(And(CDW1, 1))) { // Query flag clear? - // Disable GPEs for features granted native control. - If (And(CTRL, 0x01)) { // Hot plug control granted? - Store(0, HPCE) // clear the hot plug SCI enable bit - Store(1, HPCS) // clear the hot plug SCI status bit - } - If (And(CTRL, 0x04)) { // PME control granted? - Store(0, PMCE) // clear the PME SCI enable bit - Store(1, PMCS) // clear the PME SCI status bit - } - If (And(CTRL, 0x10)) { // OS restoring PCI Express cap structure? - // Set status to not restore PCI Express cap structure - // upon resume from S3 - Store(1, S3CR) - } - } -#endif - If (LNotEqual(Arg1, One)) { - // Unknown revision - Or(CDW1, 0x08, CDW1) - } - If (LNotEqual(CDW3, CTRL)) { - // Capabilities bits were masked - Or(CDW1, 0x10, CDW1) - } - // Update DWORD3 in the buffer - Store(CTRL, CDW3) - } Else { - Or(CDW1, 4, CDW1) // Unrecognized UUID - } - Return (Arg3) - } - } - } - -#include "../qemu-i440fx/acpi/pci-crs.asl" -#include "../qemu-i440fx/acpi/hpet.asl" - - -/**************************************************************** - * VGA - ****************************************************************/ - - Scope(_SB.PCI0) { - Device(VGA) { - Name(_ADR, 0x00010000) - Method(_S1D, 0, NotSerialized) { - Return (0x00) - } - Method(_S2D, 0, NotSerialized) { - Return (0x00) - } - Method(_S3D, 0, NotSerialized) { - Return (0x00) - } - } - } - - -/**************************************************************** - * LPC ISA bridge - ****************************************************************/ - - Scope(_SB.PCI0) { - /* PCI D31:f0 LPC ISA bridge */ - Device(ISA) { - /* PCI D31:f0 */ - Name(_ADR, 0x001f0000) - - /* ICH9 PCI to ISA irq remapping */ - OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C) - - OperationRegion(LPCD, PCI_Config, 0x80, 0x2) - Field(LPCD, AnyAcc, NoLock, Preserve) { - COMA, 3, - , 1, - COMB, 3, - - Offset(0x01), - LPTD, 2, - , 2, - FDCD, 2 - } - OperationRegion(LPCE, PCI_Config, 0x82, 0x2) - Field(LPCE, AnyAcc, NoLock, Preserve) { - CAEN, 1, - CBEN, 1, - LPEN, 1, - FDEN, 1 - } - } - } - -#include "../qemu-i440fx/acpi/isa.asl" - - -/**************************************************************** - * PCI IRQs - ****************************************************************/ - - /* Zero => PIC mode, One => APIC Mode */ - Name(\PICF, Zero) - Method(_PIC, 1, NotSerialized) { - Store(Arg0, \PICF) - } - - Scope(_SB) { - Scope(PCI0) { -#define prt_slot_lnk(nr, lnk0, lnk1, lnk2, lnk3) \ - Package() { nr##ffff, 0, lnk0, 0 }, \ - Package() { nr##ffff, 1, lnk1, 0 }, \ - Package() { nr##ffff, 2, lnk2, 0 }, \ - Package() { nr##ffff, 3, lnk3, 0 } - -#define prt_slot_lnkA(nr) prt_slot_lnk(nr, LNKA, LNKB, LNKC, LNKD) -#define prt_slot_lnkB(nr) prt_slot_lnk(nr, LNKB, LNKC, LNKD, LNKA) -#define prt_slot_lnkC(nr) prt_slot_lnk(nr, LNKC, LNKD, LNKA, LNKB) -#define prt_slot_lnkD(nr) prt_slot_lnk(nr, LNKD, LNKA, LNKB, LNKC) - -#define prt_slot_lnkE(nr) prt_slot_lnk(nr, LNKE, LNKF, LNKG, LNKH) -#define prt_slot_lnkF(nr) prt_slot_lnk(nr, LNKF, LNKG, LNKH, LNKE) -#define prt_slot_lnkG(nr) prt_slot_lnk(nr, LNKG, LNKH, LNKE, LNKF) -#define prt_slot_lnkH(nr) prt_slot_lnk(nr, LNKH, LNKE, LNKF, LNKG) - - Name(PRTP, Package() { - prt_slot_lnkE(0x0000), - prt_slot_lnkF(0x0001), - prt_slot_lnkG(0x0002), - prt_slot_lnkH(0x0003), - prt_slot_lnkE(0x0004), - prt_slot_lnkF(0x0005), - prt_slot_lnkG(0x0006), - prt_slot_lnkH(0x0007), - prt_slot_lnkE(0x0008), - prt_slot_lnkF(0x0009), - prt_slot_lnkG(0x000a), - prt_slot_lnkH(0x000b), - prt_slot_lnkE(0x000c), - prt_slot_lnkF(0x000d), - prt_slot_lnkG(0x000e), - prt_slot_lnkH(0x000f), - prt_slot_lnkE(0x0010), - prt_slot_lnkF(0x0011), - prt_slot_lnkG(0x0012), - prt_slot_lnkH(0x0013), - prt_slot_lnkE(0x0014), - prt_slot_lnkF(0x0015), - prt_slot_lnkG(0x0016), - prt_slot_lnkH(0x0017), - prt_slot_lnkE(0x0018), - - /* INTA -> PIRQA for slot 25 - 31 - see the default value of D<N>IR */ - prt_slot_lnkA(0x0019), - prt_slot_lnkA(0x001a), - prt_slot_lnkA(0x001b), - prt_slot_lnkA(0x001c), - prt_slot_lnkA(0x001d), - - /* PCIe->PCI bridge. use PIRQ[E-H] */ - prt_slot_lnkE(0x001e), - - prt_slot_lnkA(0x001f) - }) - -#define prt_slot_gsi(nr, gsi0, gsi1, gsi2, gsi3) \ - Package() { nr##ffff, 0, gsi0, 0 }, \ - Package() { nr##ffff, 1, gsi1, 0 }, \ - Package() { nr##ffff, 2, gsi2, 0 }, \ - Package() { nr##ffff, 3, gsi3, 0 } - -#define prt_slot_gsiA(nr) prt_slot_gsi(nr, GSIA, GSIB, GSIC, GSID) -#define prt_slot_gsiB(nr) prt_slot_gsi(nr, GSIB, GSIC, GSID, GSIA) -#define prt_slot_gsiC(nr) prt_slot_gsi(nr, GSIC, GSID, GSIA, GSIB) -#define prt_slot_gsiD(nr) prt_slot_gsi(nr, GSID, GSIA, GSIB, GSIC) - -#define prt_slot_gsiE(nr) prt_slot_gsi(nr, GSIE, GSIF, GSIG, GSIH) -#define prt_slot_gsiF(nr) prt_slot_gsi(nr, GSIF, GSIG, GSIH, GSIE) -#define prt_slot_gsiG(nr) prt_slot_gsi(nr, GSIG, GSIH, GSIE, GSIF) -#define prt_slot_gsiH(nr) prt_slot_gsi(nr, GSIH, GSIE, GSIF, GSIG) - - Name(PRTA, Package() { - prt_slot_gsiE(0x0000), - prt_slot_gsiF(0x0001), - prt_slot_gsiG(0x0002), - prt_slot_gsiH(0x0003), - prt_slot_gsiE(0x0004), - prt_slot_gsiF(0x0005), - prt_slot_gsiG(0x0006), - prt_slot_gsiH(0x0007), - prt_slot_gsiE(0x0008), - prt_slot_gsiF(0x0009), - prt_slot_gsiG(0x000a), - prt_slot_gsiH(0x000b), - prt_slot_gsiE(0x000c), - prt_slot_gsiF(0x000d), - prt_slot_gsiG(0x000e), - prt_slot_gsiH(0x000f), - prt_slot_gsiE(0x0010), - prt_slot_gsiF(0x0011), - prt_slot_gsiG(0x0012), - prt_slot_gsiH(0x0013), - prt_slot_gsiE(0x0014), - prt_slot_gsiF(0x0015), - prt_slot_gsiG(0x0016), - prt_slot_gsiH(0x0017), - prt_slot_gsiE(0x0018), - - /* INTA -> PIRQA for slot 25 - 31, but 30 - see the default value of D<N>IR */ - prt_slot_gsiA(0x0019), - prt_slot_gsiA(0x001a), - prt_slot_gsiA(0x001b), - prt_slot_gsiA(0x001c), - prt_slot_gsiA(0x001d), - - /* PCIe->PCI bridge. use PIRQ[E-H] */ - prt_slot_gsiE(0x001e), - - prt_slot_gsiA(0x001f) - }) - - Method(_PRT, 0, NotSerialized) { - /* PCI IRQ routing table, example from ACPI 2.0a specification, - section 6.2.8.1 */ - /* Note: we provide the same info as the PCI routing - table of the Bochs BIOS */ - If (LEqual(\PICF, Zero)) { - Return (PRTP) - } Else { - Return (PRTA) - } - } - } - - Field(PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve) { - PRQA, 8, - PRQB, 8, - PRQC, 8, - PRQD, 8, - - Offset(0x08), - PRQE, 8, - PRQF, 8, - PRQG, 8, - PRQH, 8 - } - - Method(IQST, 1, NotSerialized) { - // _STA method - get status - If (And(0x80, Arg0)) { - Return (0x09) - } - Return (0x0B) - } - Method(IQCR, 1, NotSerialized) { - // _CRS method - get current settings - Name(PRR0, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 0 } - }) - CreateDWordField(PRR0, 0x05, PRRI) - Store(And(Arg0, 0x0F), PRRI) - Return (PRR0) - } - -#define define_link(link, uid, reg) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - 5, 10, 11 \ - } \ - }) \ - Method(_STA, 0, NotSerialized) { \ - Return (IQST(reg)) \ - } \ - Method(_DIS, 0, NotSerialized) { \ - Or(reg, 0x80, reg) \ - } \ - Method(_CRS, 0, NotSerialized) { \ - Return (IQCR(reg)) \ - } \ - Method(_SRS, 1, NotSerialized) { \ - CreateDWordField(Arg0, 0x05, PRRI) \ - Store(PRRI, reg) \ - } \ - } - - define_link(LNKA, 0, PRQA) - define_link(LNKB, 1, PRQB) - define_link(LNKC, 2, PRQC) - define_link(LNKD, 3, PRQD) - define_link(LNKE, 4, PRQE) - define_link(LNKF, 5, PRQF) - define_link(LNKG, 6, PRQG) - define_link(LNKH, 7, PRQH) - -#define define_gsi_link(link, uid, gsi) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - gsi \ - } \ - }) \ - Name(_CRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - gsi \ - } \ - }) \ - Method(_SRS, 1, NotSerialized) { \ - } \ - } - - define_gsi_link(GSIA, 0, 0x10) - define_gsi_link(GSIB, 0, 0x11) - define_gsi_link(GSIC, 0, 0x12) - define_gsi_link(GSID, 0, 0x13) - define_gsi_link(GSIE, 0, 0x14) - define_gsi_link(GSIF, 0, 0x15) - define_gsi_link(GSIG, 0, 0x16) - define_gsi_link(GSIH, 0, 0x17) - } - -#if 0 -#include "../qemu-i440fx/acpi/cpu-hotplug.asl" -#endif - - -/**************************************************************** - * General purpose events - ****************************************************************/ - - Scope(_GPE) { - Name(_HID, "ACPI0006") - - Method(_L00) { - } - Method(_L01) { -#if 0 - // CPU hotplug event - _SB.PRSC() -#endif - } - Method(_L02) { - } - Method(_L03) { - } - Method(_L04) { - } - Method(_L05) { - } - Method(_L06) { - } - Method(_L07) { - } - Method(_L08) { - } - Method(_L09) { - } - Method(_L0A) { - } - Method(_L0B) { - } - Method(_L0C) { - } - Method(_L0D) { - } - Method(_L0E) { - } - Method(_L0F) { - } - } -} diff --git a/src/mainboard/emulation/qemu-q35/hda_verb.c b/src/mainboard/emulation/qemu-q35/hda_verb.c deleted file mode 100644 index 072a306..0000000 --- a/src/mainboard/emulation/qemu-q35/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/emulation/qemu-q35/mainboard.c b/src/mainboard/emulation/qemu-q35/mainboard.c deleted file mode 100644 index e991b53..0000000 --- a/src/mainboard/emulation/qemu-q35/mainboard.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org - * Copyright (C) 2010 Kevin O'Connor kevin@koconnor.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <pc80/keyboard.h> -#include <arch/io.h> -#include <console/console.h> - -#define Q35_PAM0 0x90 - -static const unsigned char qemu_q35_irqs[] = { - 10, 10, 11, 11, - 10, 10, 11, 11, -}; - -static void qemu_nb_init(device_t dev) -{ - /* Map memory at 0xc0000 - 0xfffff */ - int i; - uint8_t v = pci_read_config8(dev, Q35_PAM0); - v |= 0x30; - pci_write_config8(dev, Q35_PAM0, v); - pci_write_config8(dev, Q35_PAM0 + 1, 0x33); - pci_write_config8(dev, Q35_PAM0 + 2, 0x33); - pci_write_config8(dev, Q35_PAM0 + 3, 0x33); - pci_write_config8(dev, Q35_PAM0 + 4, 0x33); - pci_write_config8(dev, Q35_PAM0 + 5, 0x33); - pci_write_config8(dev, Q35_PAM0 + 6, 0x33); - - /* This sneaked in here, because Qemu does not - * emulate a SuperIO chip - */ - pc_keyboard_init(); - - /* setup IRQ routing for pci slots */ - for (i = 0; i < 25; i++) - pci_assign_irqs(0, i, qemu_q35_irqs + (i % 4)); - /* setup IRQ routing southbridge devices */ - for (i = 25; i < 32; i++) - pci_assign_irqs(0, i, qemu_q35_irqs); -} - -static void qemu_nb_read_resources(struct device *dev) -{ - pci_dev_read_resources(dev); - - /* reserve mmconfig */ - fixed_mem_resource(dev, 2, CONFIG_MMCONF_BASE_ADDRESS >> 10, 0x10000000 >> 10, - IORESOURCE_RESERVE); -} - - -static struct device_operations nb_operations = { - .read_resources = qemu_nb_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = qemu_nb_init, - .ops_pci = 0, -}; - -static const struct pci_driver nb_driver __pci_driver = { - .ops = &nb_operations, - .vendor = 0x8086, - .device = 0x29c0, -}; diff --git a/src/mainboard/emulation/qemu-q35/romstage.c b/src/mainboard/emulation/qemu-q35/romstage.c deleted file mode 100644 index dd86701..0000000 --- a/src/mainboard/emulation/qemu-q35/romstage.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Stefan Reinauer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <southbridge/intel/i82801ix/i82801ix.h> -#include <cpu/x86/bist.h> -#include <timestamp.h> -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" - -#include "../qemu-i440fx/memory.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int cbmem_was_initted; - - /* init_timer(); */ - post_code(0x05); - - i82801ix_early_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - //print_pci_devices(); - //dump_pci_devices(); - - cbmem_was_initted = !cbmem_recovery(0); - - timestamp_init(rdtsc()); - timestamp_add_now(TS_START_ROMSTAGE); - -} diff --git a/src/mainboard/emulation/qemu_armv7/Kconfig b/src/mainboard/emulation/qemu_armv7/Kconfig new file mode 100644 index 0000000..5bed6c4 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/Kconfig @@ -0,0 +1,101 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This software is licensed under the terms of the GNU General Public +## License version 2, as published by the Free Software Foundation, and +## may be copied, distributed, and modified under those terms. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. + +# Emulation for ARM Ltd Versatile Express Cortex-A9 +# http://www.arm.com/products/tools/development-boards/versatile-express + +# To execute, do: +# export QEMU_AUDIO_DRV=none +# qemu-system-arm -M vexpress-a9 -m 1024M -nographic -kernel build/coreboot.rom + +if BOARD_EMULATION_QEMU_ARMV7 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_ARMLTD_CORTEX_A9 + select DRIVERS_UART_PL011 + select BOARD_ROMSIZE_KB_4096 + +config MAINBOARD_DIR + string + default emulation/qemu_armv7 + +config MAINBOARD_PART_NUMBER + string + default "QEMU ARMv7" + +config MAX_CPUS + int + default 2 + +config MAINBOARD_VENDOR + string + default "ARM Ltd." + +config SYS_SDRAM_BASE + hex "SDRAM base address" + default 0x01000000 + +config DRAM_SIZE_MB + int + default 1024 + +# Memory map for qemu vexpress-a9: +# +# 0x0000_0000: jump instruction (by qemu) +# 0x0001_0000: bootblock (entry of kernel / firmware) +# 0x0002_0000: romstage, assume up to 128KB in size. +# 0x0007_ff00: stack pointer +# 0x0010_0000: CBFS header +# 0x0011_0000: CBFS data +# 0x0100_0000: reserved for ramstage +# 0x1000_0000: I/O map address + +config BOOTBLOCK_BASE + hex + default 0x00010000 + +config ROMSTAGE_BASE + hex + default 0x00020000 + +config RAMSTAGE_BASE + hex + default SYS_SDRAM_BASE + +config BOOTBLOCK_ROM_OFFSET + hex + default 0x0 + +config CBFS_HEADER_ROM_OFFSET + hex + default 0x0100000 + +config CBFS_ROM_OFFSET + hex + default 0x0110000 + +config STACK_TOP + hex + default 0x0007ff00 + +config STACK_BOTTOM + hex + default 0x00040000 + +config STACK_SIZE + hex + default 0x0003ff00 + +endif # BOARD_EMULATION_QEMU_ARMV7 diff --git a/src/mainboard/emulation/qemu_armv7/Makefile.inc b/src/mainboard/emulation/qemu_armv7/Makefile.inc new file mode 100644 index 0000000..e088da6 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/Makefile.inc @@ -0,0 +1,27 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This software is licensed under the terms of the GNU General Public +## License version 2, as published by the Free Software Foundation, and +## may be copied, distributed, and modified under those terms. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. + +romstage-y += romstage.c + +bootblock-y += media.c +romstage-y += media.c +ramstage-y += media.c + +bootblock-y += timer.c +romstage-y += timer.c +ramstage-y += timer.c + +bootblock-y += mmio.c +romstage-y += mmio.c +ramstage-y += mmio.c diff --git a/src/mainboard/emulation/qemu_armv7/board_info.txt b/src/mainboard/emulation/qemu_armv7/board_info.txt new file mode 100644 index 0000000..1bb78e9 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/board_info.txt @@ -0,0 +1,3 @@ +Board name: QEMU armv7 (vexpress-a9) +Category: emulation +Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu_armv7/devicetree.cb b/src/mainboard/emulation/qemu_armv7/devicetree.cb new file mode 100644 index 0000000..9153442 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/devicetree.cb @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google, Inc. +## +## This software is licensed under the terms of the GNU General Public +## License version 2, as published by the Free Software Foundation, and +## may be copied, distributed, and modified under those terms. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. + +# TODO fill with Versatile Express board data in QEMU. +chip cpu/armltd/cortex-a9 + chip drivers/generic/generic # I2C0 controller + device i2c 6 on end # Fake component for testing + end +end diff --git a/src/mainboard/emulation/qemu_armv7/mainboard.c b/src/mainboard/emulation/qemu_armv7/mainboard.c new file mode 100644 index 0000000..83a55e3 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/mainboard.c @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <device/device.h> + +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Enable qemu/armv7 device...\n"); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/emulation/qemu_armv7/media.c b/src/mainboard/emulation/qemu_armv7/media.c new file mode 100644 index 0000000..1168881 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/media.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <cbfs.h> +#include <string.h> +#include <console/console.h> + +/* Simple memory-mapped ROM emulation. */ + +static int emu_rom_open(struct cbfs_media *media) +{ + return 0; +} + +static void *emu_rom_map(struct cbfs_media *media, size_t offset, size_t count) +{ + return (void*)(offset + CONFIG_BOOTBLOCK_BASE); +} + +static void *emu_rom_unmap(struct cbfs_media *media, const void *address) +{ + return NULL; +} + +static size_t emu_rom_read(struct cbfs_media *media, void *dest, size_t offset, + size_t count) +{ + void *ptr = emu_rom_map(media, offset, count); + memcpy(dest, ptr, count); + emu_rom_unmap(media, ptr); + return count; +} + +static int emu_rom_close(struct cbfs_media *media) +{ + return 0; +} + +int init_emu_rom_cbfs_media(struct cbfs_media *media); + +int init_emu_rom_cbfs_media(struct cbfs_media *media) +{ + media->open = emu_rom_open; + media->close = emu_rom_close; + media->map = emu_rom_map; + media->unmap = emu_rom_unmap; + media->read = emu_rom_read; + return 0; +} + +int init_default_cbfs_media(struct cbfs_media *media) +{ + return init_emu_rom_cbfs_media(media); +} diff --git a/src/mainboard/emulation/qemu_armv7/mmio.c b/src/mainboard/emulation/qemu_armv7/mmio.c new file mode 100644 index 0000000..00a20a2 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/mmio.c @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/uart.h> + +#define VEXPRESS_UART0_IO_ADDRESS (0x10009000) + +uintptr_t uart_platform_base(int idx) +{ + return VEXPRESS_UART0_IO_ADDRESS; +} diff --git a/src/mainboard/emulation/qemu_armv7/romstage.c b/src/mainboard/emulation/qemu_armv7/romstage.c new file mode 100644 index 0000000..00dfecd --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/romstage.c @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <cbfs.h> +#include <console/console.h> +#include <arch/stages.h> + +void main(void) +{ + void *entry; + + console_init(); + + entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/ramstage"); + + stage_exit(entry); +} diff --git a/src/mainboard/emulation/qemu_armv7/timer.c b/src/mainboard/emulation/qemu_armv7/timer.c new file mode 100644 index 0000000..53c3789 --- /dev/null +++ b/src/mainboard/emulation/qemu_armv7/timer.c @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +void udelay(unsigned int n); +void udelay(unsigned int n) { + /* TODO provide delay here. */ +} + +int init_timer(void); +int init_timer(void) { + return 0; +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/Kconfig b/src/mainboard/emulation/qemu_x86_i440fx_piix4/Kconfig new file mode 100644 index 0000000..6cfa4de --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/Kconfig @@ -0,0 +1,36 @@ +if BOARD_EMULATION_QEMU_X86_I440FX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_QEMU_X86 + select SOUTHBRIDGE_INTEL_I82371EB + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_256 + select DYNAMIC_CBMEM + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_DO_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + +config MAINBOARD_DIR + string + default emulation/qemu_x86_i440fx_piix4 + +config MAINBOARD_PART_NUMBER + string + default "QEMU x86 i440fx/piix4" + +config IRQ_SLOT_COUNT + int + default 6 + +config DCACHE_RAM_BASE + hex + default 0xd0000 + +config DCACHE_RAM_SIZE + hex + default 0x10000 + +endif # BOARD_EMULATION_QEMU_X86_I440FX diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/Makefile.inc b/src/mainboard/emulation/qemu_x86_i440fx_piix4/Makefile.inc new file mode 100644 index 0000000..450106a --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/Makefile.inc @@ -0,0 +1,3 @@ +cpu_incs += $(src)/mainboard/emulation/qemu_x86_i440fx_piix4/cache_as_ram.inc +ramstage-y += northbridge.c +ramstage-y += fw_cfg.c diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/cpu-hotplug.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/cpu-hotplug.asl new file mode 100644 index 0000000..0f3e83b --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/cpu-hotplug.asl @@ -0,0 +1,78 @@ +/**************************************************************** + * CPU hotplug + ****************************************************************/ + +Scope(_SB) { + /* Objects filled in by run-time generated SSDT */ + External(NTFY, MethodObj) + External(CPON, PkgObj) + + /* Methods called by run-time generated SSDT Processor objects */ + Method(CPMA, 1, NotSerialized) { + // _MAT method - create an madt apic buffer + // Arg0 = Processor ID = Local APIC ID + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + // Local1 = Buffer (in madt apic form) to return + Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1) + // Update the processor id, lapic id, and enable/disable status + Store(Arg0, Index(Local1, 2)) + Store(Arg0, Index(Local1, 3)) + Store(Local0, Index(Local1, 4)) + Return (Local1) + } + Method(CPST, 1, NotSerialized) { + // _STA method - return ON status of cpu + // Arg0 = Processor ID = Local APIC ID + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + If (Local0) { + Return (0xF) + } Else { + Return (0x0) + } + } + Method(CPEJ, 2, NotSerialized) { + // _EJ0 method - eject callback + Sleep(200) + } + + /* CPU hotplug notify method */ + OperationRegion(PRST, SystemIO, 0xaf00, 32) + Field(PRST, ByteAcc, NoLock, Preserve) { + PRS, 256 + } + Method(PRSC, 0) { + // Local5 = active cpu bitmap + Store(PRS, Local5) + // Local2 = last read byte from bitmap + Store(Zero, Local2) + // Local0 = Processor ID / APIC ID iterator + Store(Zero, Local0) + While (LLess(Local0, SizeOf(CPON))) { + // Local1 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Local0)), Local1) + If (And(Local0, 0x07)) { + // Shift down previously read bitmap byte + ShiftRight(Local2, 1, Local2) + } Else { + // Read next byte from cpu bitmap + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) + } + // Local3 = active state for this cpu + Store(And(Local2, 1), Local3) + + If (LNotEqual(Local1, Local3)) { + // State change - update CPON with new state + Store(Local3, Index(CPON, Local0)) + // Do CPU notify + If (LEqual(Local3, 1)) { + NTFY(Local0, 1) + } Else { + NTFY(Local0, 3) + } + } + Increment(Local0) + } + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/dbug.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/dbug.asl new file mode 100644 index 0000000..276321f --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/dbug.asl @@ -0,0 +1,26 @@ +/**************************************************************** + * Debugging + ****************************************************************/ + +Scope() { + /* Debug Output */ + OperationRegion(DBG, SystemIO, 0x0402, 0x01) + Field(DBG, ByteAcc, NoLock, Preserve) { + DBGB, 8, + } + + /* Debug method - use this method to send output to the QEMU + * BIOS debug port. This method handles strings, integers, + * and buffers. For example: DBUG("abc") DBUG(0x123) */ + Method(DBUG, 1) { + ToHexString(Arg0, Local0) + ToBuffer(Local0, Local0) + Subtract(SizeOf(Local0), 1, Local1) + Store(Zero, Local2) + While (LLess(Local2, Local1)) { + Store(DerefOf(Index(Local0, Local2)), DBGB) + Increment(Local2) + } + Store(0x0A, DBGB) + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/hpet.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/hpet.asl new file mode 100644 index 0000000..f33e527 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/hpet.asl @@ -0,0 +1,36 @@ +/**************************************************************** + * HPET + ****************************************************************/ + +Scope(_SB) { + Device(HPET) { + Name(_HID, EISAID("PNP0103")) + Name(_UID, 0) + OperationRegion(HPTM, SystemMemory, 0xFED00000, 0x400) + Field(HPTM, DWordAcc, Lock, Preserve) { + VEND, 32, + PRD, 32, + } + Method(_STA, 0, NotSerialized) { + Store(VEND, Local0) + Store(PRD, Local1) + ShiftRight(Local0, 16, Local0) + If (LOr(LEqual(Local0, 0), LEqual(Local0, 0xffff))) { + Return (0x0) + } + If (LOr(LEqual(Local1, 0), LGreater(Local1, 100000000))) { + Return (0x0) + } + Return (0x0F) + } + Name(_CRS, ResourceTemplate() { +#if 0 /* This makes WinXP BSOD for not yet figured reasons. */ + IRQNoFlags() {2, 8} +#endif + Memory32Fixed(ReadOnly, + 0xFED00000, // Address Base + 0x00000400, // Address Length + ) + }) + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/isa.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/isa.asl new file mode 100644 index 0000000..23761db --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/isa.asl @@ -0,0 +1,102 @@ +/* Common legacy ISA style devices. */ +Scope(_SB.PCI0.ISA) { + + Device(RTC) { + Name(_HID, EisaId("PNP0B00")) + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0070, 0x0070, 0x10, 0x02) + IRQNoFlags() { 8 } + IO(Decode16, 0x0072, 0x0072, 0x02, 0x06) + }) + } + + Device(KBD) { + Name(_HID, EisaId("PNP0303")) + Method(_STA, 0, NotSerialized) { + Return (0x0f) + } + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO(Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags() { 1 } + }) + } + + Device(MOU) { + Name(_HID, EisaId("PNP0F13")) + Method(_STA, 0, NotSerialized) { + Return (0x0f) + } + Name(_CRS, ResourceTemplate() { + IRQNoFlags() { 12 } + }) + } + + Device(FDC0) { + Name(_HID, EisaId("PNP0700")) + Method(_STA, 0, NotSerialized) { + Store(FDEN, Local0) + If (LEqual(Local0, 0)) { + Return (0x00) + } Else { + Return (0x0F) + } + } + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO(Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags() { 6 } + DMA(Compatibility, NotBusMaster, Transfer8) { 2 } + }) + } + + Device(LPT) { + Name(_HID, EisaId("PNP0400")) + Method(_STA, 0, NotSerialized) { + Store(LPEN, Local0) + If (LEqual(Local0, 0)) { + Return (0x00) + } Else { + Return (0x0F) + } + } + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0378, 0x0378, 0x08, 0x08) + IRQNoFlags() { 7 } + }) + } + + Device(COM1) { + Name(_HID, EisaId("PNP0501")) + Name(_UID, 0x01) + Method(_STA, 0, NotSerialized) { + Store(CAEN, Local0) + If (LEqual(Local0, 0)) { + Return (0x00) + } Else { + Return (0x0F) + } + } + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x03F8, 0x03F8, 0x00, 0x08) + IRQNoFlags() { 4 } + }) + } + + Device(COM2) { + Name(_HID, EisaId("PNP0501")) + Name(_UID, 0x02) + Method(_STA, 0, NotSerialized) { + Store(CBEN, Local0) + If (LEqual(Local0, 0)) { + Return (0x00) + } Else { + Return (0x0F) + } + } + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x02F8, 0x02F8, 0x00, 0x08) + IRQNoFlags() { 3 } + }) + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/pci-crs.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/pci-crs.asl new file mode 100644 index 0000000..63d1fd5 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi/pci-crs.asl @@ -0,0 +1,94 @@ +/* PCI CRS (current resources) definition. */ +Scope(_SB.PCI0) { + + Name(CRES, ResourceTemplate() { + WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x00FF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0100, // Address Length + ,, ) + IO(Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0D00, // Address Range Minimum + 0xFFFF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0xF300, // Address Length + ,, , TypeStatic) + DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x000A0000, // Address Range Minimum + 0x000BFFFF, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00020000, // Address Length + ,, , AddressRangeMemory, TypeStatic) + DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0xE0000000, // Address Range Minimum + 0xFEBFFFFF, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x1EC00000, // Address Length + ,, PW32, AddressRangeMemory, TypeStatic) + }) + + Name(CR64, ResourceTemplate() { + QWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x8000000000, // Address Range Minimum + 0xFFFFFFFFFF, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x8000000000, // Address Length + ,, PW64, AddressRangeMemory, TypeStatic) + }) + + Method(_CRS, 0) { +#if 0 + /* Fields provided by dynamically created ssdt */ + External(P0S, IntObj) + External(P0E, IntObj) + External(P1V, IntObj) + External(P1S, BuffObj) + External(P1E, BuffObj) + External(P1L, BuffObj) + + /* fixup 32bit pci io window */ + CreateDWordField(CRES, _SB.PCI0.PW32._MIN, PS32) + CreateDWordField(CRES, _SB.PCI0.PW32._MAX, PE32) + CreateDWordField(CRES, _SB.PCI0.PW32._LEN, PL32) + Store(P0S, PS32) + Store(P0E, PE32) + Store(Add(Subtract(P0E, P0S), 1), PL32) + + If (LEqual(P1V, Zero)) { + Return (CRES) + } + + /* fixup 64bit pci io window */ + CreateQWordField(CR64, _SB.PCI0.PW64._MIN, PS64) + CreateQWordField(CR64, _SB.PCI0.PW64._MAX, PE64) + CreateQWordField(CR64, _SB.PCI0.PW64._LEN, PL64) + Store(P1S, PS64) + Store(P1E, PE64) + Store(P1L, PL64) + /* add window and return result */ + ConcatenateResTemplate(CRES, CR64, Local0) + Return (Local0) +#else + Return (CRES) +#endif + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi_tables.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi_tables.c new file mode 100644 index 0000000..8be187a --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/acpi_tables.c @@ -0,0 +1,195 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +#include "fw_cfg.h" + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = fw_cfg_acpi_tables(start); + if (current) + return current; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/board_info.txt b/src/mainboard/emulation/qemu_x86_i440fx_piix4/board_info.txt new file mode 100644 index 0000000..6938d86 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/board_info.txt @@ -0,0 +1,2 @@ +Category: emulation +Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/cache_as_ram.inc b/src/mainboard/emulation/qemu_x86_i440fx_piix4/cache_as_ram.inc new file mode 100644 index 0000000..ce54c51 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/cache_as_ram.inc @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich rminnich@gmail.com + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/post_code.h> +#include <cbmem.h> + +#define CACHE_AS_RAM_SIZE 0x10000 +#define CACHE_AS_RAM_BASE 0xd0000 + +#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1) + + /* Save the BIST result. */ + movl %eax, %ebp + +cache_as_ram: + post_code(0x20) + /* Clear the cache memory region. This will also fill up the cache */ + movl $CACHE_AS_RAM_BASE, %esi + movl %esi, %edi + movl $(CACHE_AS_RAM_SIZE / 4), %ecx + // movl $0x23322332, %eax + xorl %eax, %eax + rep stosl + + post_code(0x21) + /* Set up the stack pointer. */ + movl $(CACHE_AS_RAM_SIZE + CACHE_AS_RAM_BASE - 4), %eax + movl %eax, %esp + + /* Restore the BIST result. */ + movl %ebp, %eax + movl %esp, %ebp + pushl %eax + +before_romstage: + post_code(0x29) + /* Call romstage.c main function. */ + call main + + post_code(0x30) + +__main: + post_code(POST_PREPARE_RAMSTAGE) + cld /* Clear direction flag. */ + + movl $CONFIG_RAMTOP, %esp + movl %esp, %ebp + call copy_and_run + +.Lhlt: + post_code(POST_DEAD_CODE) + hlt + jmp .Lhlt + diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/cmos.layout b/src/mainboard/emulation/qemu_x86_i440fx_piix4/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/devicetree.cb b/src/mainboard/emulation/qemu_x86_i440fx_piix4/devicetree.cb new file mode 100644 index 0000000..a89a572 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/devicetree.cb @@ -0,0 +1,18 @@ +chip mainboard/emulation/qemu_x86_i440fx_piix4 + device cpu_cluster 0 on + chip cpu/qemu-x86 + device lapic 0 on end + end + end + device domain 0 on + device pci 0.0 on end # northbridge (i440fx) + chip southbridge/intel/i82371eb # southbridge + device pci 01.0 on end # ISA bridge + device pci 01.1 on end # IDE + device pci 01.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "gpo" = "0x7fffbbff" + end + end +end diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/dsdt.asl b/src/mainboard/emulation/qemu_x86_i440fx_piix4/dsdt.asl new file mode 100644 index 0000000..e63d10f --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/dsdt.asl @@ -0,0 +1,347 @@ +/* + * Bochs/QEMU ACPI DSDT ASL definition + * + * Copyright (c) 2006 Fabrice Bellard + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +DefinitionBlock ( + "dsdt.aml", // Output Filename + "DSDT", // Signature + 0x01, // DSDT Compliance Revision + "CORE", // OEMID + "COREBOOT", // TABLE ID + 0x1 // OEM Revision + ) +{ + +#include "acpi/dbug.asl" + + +/**************************************************************** + * PCI Bus definition + ****************************************************************/ + + Scope(_SB) { + Device(PCI0) { + Name(_HID, EisaId("PNP0A03")) + Name(_ADR, 0x00) + Name(_UID, 1) + } + } + +#include "acpi/pci-crs.asl" +#include "acpi/hpet.asl" + + +/**************************************************************** + * VGA + ****************************************************************/ + + Scope(_SB.PCI0) { + Device(VGA) { + Name(_ADR, 0x00020000) + OperationRegion(PCIC, PCI_Config, Zero, 0x4) + Field(PCIC, DWordAcc, NoLock, Preserve) { + VEND, 32 + } + Method(_S1D, 0, NotSerialized) { + Return (0x00) + } + Method(_S2D, 0, NotSerialized) { + Return (0x00) + } + Method(_S3D, 0, NotSerialized) { + If (LEqual(VEND, 0x1001b36)) { + Return (0x03) // QXL + } Else { + Return (0x00) + } + } + } + } + + +/**************************************************************** + * PIIX4 PM + ****************************************************************/ + + Scope(_SB.PCI0) { + Device(PX13) { + Name(_ADR, 0x00010003) + OperationRegion(P13C, PCI_Config, 0x00, 0xff) + } + } + + +/**************************************************************** + * PIIX3 ISA bridge + ****************************************************************/ + + Scope(_SB.PCI0) { + Device(ISA) { + Name(_ADR, 0x00010000) + + /* PIIX PCI to ISA irq remapping */ + OperationRegion(P40C, PCI_Config, 0x60, 0x04) + + /* enable bits */ + Field(_SB.PCI0.PX13.P13C, AnyAcc, NoLock, Preserve) { + Offset(0x5f), + , 7, + LPEN, 1, // LPT + Offset(0x67), + , 3, + CAEN, 1, // COM1 + , 3, + CBEN, 1, // COM2 + } + Name(FDEN, 1) + } + } + +#include "acpi/isa.asl" + + +/**************************************************************** + * PCI hotplug + ****************************************************************/ + + Scope(_SB.PCI0) { + OperationRegion(PCST, SystemIO, 0xae00, 0x08) + Field(PCST, DWordAcc, NoLock, WriteAsZeros) { + PCIU, 32, + PCID, 32, + } + + OperationRegion(SEJ, SystemIO, 0xae08, 0x04) + Field(SEJ, DWordAcc, NoLock, WriteAsZeros) { + B0EJ, 32, + } + + /* Methods called by bulk generated PCI devices below */ + + /* Methods called by hotplug devices */ + Method(PCEJ, 1, NotSerialized) { + // _EJ0 method - eject callback + Store(ShiftLeft(1, Arg0), B0EJ) + Return (0x0) + } + + /* Hotplug notification method supplied by SSDT */ + External(_SB.PCI0.PCNT, MethodObj) + + /* PCI hotplug notify method */ + Method(PCNF, 0) { + // Local0 = iterator + Store(Zero, Local0) + While (LLess(Local0, 31)) { + Increment(Local0) + If (And(PCIU, ShiftLeft(1, Local0))) { + PCNT(Local0, 1) + } + If (And(PCID, ShiftLeft(1, Local0))) { + PCNT(Local0, 3) + } + } + } + } + + +/**************************************************************** + * PCI IRQs + ****************************************************************/ + + Scope(_SB) { + Scope(PCI0) { + Name(_PRT, Package() { + /* PCI IRQ routing table, example from ACPI 2.0a specification, + section 6.2.8.1 */ + /* Note: we provide the same info as the PCI routing + table of the Bochs BIOS */ + +#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \ + Package() { nr##ffff, 0, lnk0, 0 }, \ + Package() { nr##ffff, 1, lnk1, 0 }, \ + Package() { nr##ffff, 2, lnk2, 0 }, \ + Package() { nr##ffff, 3, lnk3, 0 } + +#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC) +#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD) +#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA) +#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB) + + prt_slot0(0x0000), + /* Device 1 is power mgmt device, and can only use irq 9 */ + prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD), + prt_slot2(0x0002), + prt_slot3(0x0003), + prt_slot0(0x0004), + prt_slot1(0x0005), + prt_slot2(0x0006), + prt_slot3(0x0007), + prt_slot0(0x0008), + prt_slot1(0x0009), + prt_slot2(0x000a), + prt_slot3(0x000b), + prt_slot0(0x000c), + prt_slot1(0x000d), + prt_slot2(0x000e), + prt_slot3(0x000f), + prt_slot0(0x0010), + prt_slot1(0x0011), + prt_slot2(0x0012), + prt_slot3(0x0013), + prt_slot0(0x0014), + prt_slot1(0x0015), + prt_slot2(0x0016), + prt_slot3(0x0017), + prt_slot0(0x0018), + prt_slot1(0x0019), + prt_slot2(0x001a), + prt_slot3(0x001b), + prt_slot0(0x001c), + prt_slot1(0x001d), + prt_slot2(0x001e), + prt_slot3(0x001f), + }) + } + + Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) { + PRQ0, 8, + PRQ1, 8, + PRQ2, 8, + PRQ3, 8 + } + + Method(IQST, 1, NotSerialized) { + // _STA method - get status + If (And(0x80, Arg0)) { + Return (0x09) + } + Return (0x0B) + } + Method(IQCR, 1, NotSerialized) { + // _CRS method - get current settings + Name(PRR0, ResourceTemplate() { + Interrupt(, Level, ActiveHigh, Shared) { 0 } + }) + CreateDWordField(PRR0, 0x05, PRRI) + If (LLess(Arg0, 0x80)) { + Store(Arg0, PRRI) + } + Return (PRR0) + } + +#define define_link(link, uid, reg) \ + Device(link) { \ + Name(_HID, EISAID("PNP0C0F")) \ + Name(_UID, uid) \ + Name(_PRS, ResourceTemplate() { \ + Interrupt(, Level, ActiveHigh, Shared) { \ + 5, 10, 11 \ + } \ + }) \ + Method(_STA, 0, NotSerialized) { \ + Return (IQST(reg)) \ + } \ + Method(_DIS, 0, NotSerialized) { \ + Or(reg, 0x80, reg) \ + } \ + Method(_CRS, 0, NotSerialized) { \ + Return (IQCR(reg)) \ + } \ + Method(_SRS, 1, NotSerialized) { \ + CreateDWordField(Arg0, 0x05, PRRI) \ + Store(PRRI, reg) \ + } \ + } + + define_link(LNKA, 0, PRQ0) + define_link(LNKB, 1, PRQ1) + define_link(LNKC, 2, PRQ2) + define_link(LNKD, 3, PRQ3) + + Device(LNKS) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + Name(_PRS, ResourceTemplate() { + Interrupt(, Level, ActiveHigh, Shared) { 9 } + }) + + // The SCI cannot be disabled and is always attached to GSI 9, + // so these are no-ops. We only need this link to override the + // polarity to active high and match the content of the MADT. + Method(_STA, 0, NotSerialized) { Return (0x0b) } + Method(_DIS, 0, NotSerialized) { } + Method(_CRS, 0, NotSerialized) { Return (_PRS) } + Method(_SRS, 1, NotSerialized) { } + } + } + +#if 0 +#include "acpi/cpu-hotplug.asl" +#endif + + +/**************************************************************** + * General purpose events + ****************************************************************/ + + Scope(_GPE) { + Name(_HID, "ACPI0006") + + Method(_L00) { + } + Method(_E01) { +#if 0 + // PCI hotplug event + _SB.PCI0.PCNF() +#endif + } + Method(_E02) { +#if 0 + // CPU hotplug event + _SB.PRSC() +#endif + } + Method(_L03) { + } + Method(_L04) { + } + Method(_L05) { + } + Method(_L06) { + } + Method(_L07) { + } + Method(_L08) { + } + Method(_L09) { + } + Method(_L0A) { + } + Method(_L0B) { + } + Method(_L0C) { + } + Method(_L0D) { + } + Method(_L0E) { + } + Method(_L0F) { + } + } +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.c new file mode 100644 index 0000000..44256be --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.c @@ -0,0 +1,393 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <swab.h> +#include <smbios.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/acpigen.h> + +#include "fw_cfg.h" +#include "fw_cfg_if.h" + +#define FW_CFG_PORT_CTL 0x0510 +#define FW_CFG_PORT_DATA 0x0511 + +static unsigned char fw_cfg_detected = 0xff; +static FWCfgFiles *fw_files; + +static int fw_cfg_present(void) +{ + static const char qsig[] = "QEMU"; + unsigned char sig[4]; + + if (fw_cfg_detected == 0xff) { + fw_cfg_get(FW_CFG_SIGNATURE, sig, sizeof(sig)); + fw_cfg_detected = (memcmp(sig, qsig, 4) == 0) ? 1 : 0; + printk(BIOS_INFO, "QEMU: firmware config interface %s\n", + fw_cfg_detected ? "detected" : "not found"); + } + return fw_cfg_detected; +} + +void fw_cfg_get(int entry, void *dst, int dstlen) +{ + outw(entry, FW_CFG_PORT_CTL); + insb(FW_CFG_PORT_DATA, dst, dstlen); +} + +static void fw_cfg_init_file(void) +{ + u32 i, size, count = 0; + + if (fw_files != NULL) + return; + + fw_cfg_get(FW_CFG_FILE_DIR, &count, sizeof(count)); + count = swab32(count); + size = count * sizeof(FWCfgFile) + sizeof(count); + printk(BIOS_DEBUG, "QEMU: %d files in fw_cfg\n", count); + fw_files = malloc(size); + fw_cfg_get(FW_CFG_FILE_DIR, fw_files, size); + fw_files->count = swab32(fw_files->count); + for (i = 0; i < count; i++) { + fw_files->f[i].size = swab32(fw_files->f[i].size); + fw_files->f[i].select = swab16(fw_files->f[i].select); + printk(BIOS_DEBUG, "QEMU: %s [size=%d]\n", + fw_files->f[i].name, fw_files->f[i].size); + } +} + +static FWCfgFile *fw_cfg_find_file(const char *name) +{ + int i; + + fw_cfg_init_file(); + for (i = 0; i < fw_files->count; i++) + if (strcmp(fw_files->f[i].name, name) == 0) + return fw_files->f + i; + return NULL; +} + +int fw_cfg_check_file(const char *name) +{ + FWCfgFile *file; + + if (!fw_cfg_present()) + return -1; + file = fw_cfg_find_file(name); + if (!file) + return -1; + return file->size; +} + +void fw_cfg_load_file(const char *name, void *dst) +{ + FWCfgFile *file; + + if (!fw_cfg_present()) + return; + file = fw_cfg_find_file(name); + if (!file) + return; + fw_cfg_get(file->select, dst, file->size); +} + +int fw_cfg_max_cpus(void) +{ + unsigned short max_cpus; + + if (!fw_cfg_present()) + return -1; + + fw_cfg_get(FW_CFG_MAX_CPUS, &max_cpus, sizeof(max_cpus)); + return max_cpus; +} + +/* ---------------------------------------------------------------------- */ + +/* + * Starting with release 1.7 qemu provides acpi tables via fw_cfg. + * Main advantage is that new (virtual) hardware which needs acpi + * support JustWorks[tm] without having to patch & update the firmware + * (seabios, coreboot, ...) accordingly. + * + * Qemu provides a etc/table-loader file with instructions for the + * firmware: + * - A "load" instruction to fetch acpi data from fw_cfg. + * - A "pointer" instruction to patch a pointer. This is needed to + * get table-to-table references right, it is basically a + * primitive dynamic linker for acpi tables. + * - A "checksum" instruction to generate acpi table checksums. + * + * If a etc/table-loader file is found we'll go try loading the acpi + * tables from fw_cfg, otherwise we'll fallback to the acpi tables + * compiled in. + */ + +#define BIOS_LINKER_LOADER_FILESZ 56 + +struct BiosLinkerLoaderEntry { + uint32_t command; + union { + /* + * COMMAND_ALLOCATE - allocate a table from @alloc.file + * subject to @alloc.align alignment (must be power of 2) + * and @alloc.zone (can be HIGH or FSEG) requirements. + * + * Must appear exactly once for each file, and before + * this file is referenced by any other command. + */ + struct { + char file[BIOS_LINKER_LOADER_FILESZ]; + uint32_t align; + uint8_t zone; + } alloc; + + /* + * COMMAND_ADD_POINTER - patch the table (originating from + * @dest_file) at @pointer.offset, by adding a pointer to the table + * originating from @src_file. 1,2,4 or 8 byte unsigned + * addition is used depending on @pointer.size. + */ + struct { + char dest_file[BIOS_LINKER_LOADER_FILESZ]; + char src_file[BIOS_LINKER_LOADER_FILESZ]; + uint32_t offset; + uint8_t size; + } pointer; + + /* + * COMMAND_ADD_CHECKSUM - calculate checksum of the range specified by + * @cksum_start and @cksum_length fields, + * and then add the value at @cksum.offset. + * Checksum simply sums -X for each byte X in the range + * using 8-bit math. + */ + struct { + char file[BIOS_LINKER_LOADER_FILESZ]; + uint32_t offset; + uint32_t start; + uint32_t length; + } cksum; + + /* padding */ + char pad[124]; + }; +} __attribute__((packed)); +typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry; + +enum { + BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1, + BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2, + BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3, +}; + +enum { + BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1, + BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2, +}; + +unsigned long fw_cfg_acpi_tables(unsigned long start) +{ + BiosLinkerLoaderEntry *s; + unsigned long *addrs, current; + uint32_t *ptr4; + uint64_t *ptr8; + int rc, i, j, src, dst, max; + + rc = fw_cfg_check_file("etc/table-loader"); + if (rc < 0) + return 0; + + printk(BIOS_DEBUG, "QEMU: found acpi tables in fw_cfg.\n"); + + max = rc / sizeof(*s); + s = malloc(rc); + addrs = malloc(max * sizeof(*addrs)); + fw_cfg_load_file("etc/table-loader", s); + + current = start; + for (i = 0; i < max && s[i].command != 0; i++) { + switch (s[i].command) { + case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: + current = ALIGN(current, s[i].alloc.align); + rc = fw_cfg_check_file(s[i].alloc.file); + if (rc < 0) + goto err; + printk(BIOS_DEBUG, "QEMU: loading "%s" to 0x%lx (len %d)\n", + s[i].alloc.file, current, rc); + fw_cfg_load_file(s[i].alloc.file, (void*)current); + addrs[i] = current; + current += rc; + break; + + case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: + src = -1; dst = -1; + for (j = 0; j < i; j++) { + if (s[j].command != BIOS_LINKER_LOADER_COMMAND_ALLOCATE) + continue; + if (strcmp(s[j].alloc.file, s[i].pointer.dest_file) == 0) + dst = j; + if (strcmp(s[j].alloc.file, s[i].pointer.src_file) == 0) + src = j; + } + if (src == -1 || dst == -1) + goto err; + + switch (s[i].pointer.size) { + case 4: + ptr4 = (uint32_t*)(addrs[dst] + s[i].pointer.offset); + *ptr4 += addrs[src]; + break; + + case 8: + ptr8 = (uint64_t*)(addrs[dst] + s[i].pointer.offset); + *ptr8 += addrs[src]; + break; + + default: + /* + * Should not happen. acpi knows 1 and 2 byte ptrs + * too, but we are operating with 32bit offsets which + * would simply not fit in there ... + */ + printk(BIOS_DEBUG, "QEMU: acpi: unimplemented ptr size %d\n", + s[i].pointer.size); + goto err; + } + break; + + case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: + dst = -1; + for (j = 0; j < i; j++) { + if (s[j].command != BIOS_LINKER_LOADER_COMMAND_ALLOCATE) + continue; + if (strcmp(s[j].alloc.file, s[i].cksum.file) == 0) + dst = j; + } + if (dst == -1) + goto err; + + ptr4 = (uint32_t*)(addrs[dst] + s[i].cksum.offset); + *ptr4 = 0; + *ptr4 = acpi_checksum((void *)(addrs[dst] + s[i].cksum.start), + s[i].cksum.length); + break; + + default: + printk(BIOS_DEBUG, "QEMU: acpi: unknown script cmd 0x%x @ %p\n", + s[i].command, s+i); + goto err; + }; + } + + printk(BIOS_DEBUG, "QEMU: loaded acpi tables from fw_cfg.\n"); + free(s); + free(addrs); + return ALIGN(current, 16); + +err: + printk(BIOS_DEBUG, "QEMU: loading acpi tables from fw_cfg failed.\n"); + free(s); + free(addrs); + return 0; +} + +/* ---------------------------------------------------------------------- */ +/* pick up smbios information from fw_cfg */ + +static const char *type1_manufacturer; +static const char *type1_product_name; +static const char *type1_version; +static const char *type1_serial_number; +static const char *type1_family; +static u8 type1_uuid[16]; + +static void fw_cfg_smbios_init(void) +{ + static int done = 0; + uint16_t i, count = 0; + FwCfgSmbios entry; + char *buf; + + if (done) + return; + done = 1; + + fw_cfg_get(FW_CFG_SMBIOS_ENTRIES, &count, sizeof(count)); + for (i = 0; i < count; i++) { + insb(FW_CFG_PORT_DATA, &entry, sizeof(entry)); + buf = malloc(entry.length - sizeof(entry)); + insb(FW_CFG_PORT_DATA, buf, entry.length - sizeof(entry)); + if (entry.headertype == SMBIOS_FIELD_ENTRY && + entry.tabletype == 1) { + switch (entry.fieldoffset) { + case offsetof(struct smbios_type1, manufacturer): + type1_manufacturer = strdup(buf); + break; + case offsetof(struct smbios_type1, product_name): + type1_product_name = strdup(buf); + break; + case offsetof(struct smbios_type1, version): + type1_version = strdup(buf); + break; + case offsetof(struct smbios_type1, serial_number): + type1_serial_number = strdup(buf); + break; + case offsetof(struct smbios_type1, family): + type1_family = strdup(buf); + break; + case offsetof(struct smbios_type1, uuid): + memcpy(type1_uuid, buf, 16); + break; + } + } + free(buf); + } +} + +const char *smbios_mainboard_manufacturer(void) +{ + fw_cfg_smbios_init(); + return type1_manufacturer ?: CONFIG_MAINBOARD_SMBIOS_MANUFACTURER; +} + +const char *smbios_mainboard_product_name(void) +{ + fw_cfg_smbios_init(); + return type1_product_name ?: CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME; +} + +const char *smbios_mainboard_version(void) +{ + fw_cfg_smbios_init(); + return type1_version ?: CONFIG_MAINBOARD_VERSION; +} + +const char *smbios_mainboard_serial_number(void) +{ + fw_cfg_smbios_init(); + return type1_serial_number ?: CONFIG_MAINBOARD_SERIAL_NUMBER; +} + +void smbios_mainboard_set_uuid(u8 *uuid) +{ + fw_cfg_smbios_init(); + memcpy(uuid, type1_uuid, 16); +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.h b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.h new file mode 100644 index 0000000..5ab024f --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg.h @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void fw_cfg_get(int entry, void *dst, int dstlen); +int fw_cfg_check_file(const char *name); +void fw_cfg_load_file(const char *name, void *dst); +int fw_cfg_max_cpus(void); +unsigned long fw_cfg_acpi_tables(unsigned long start); diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg_if.h b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg_if.h new file mode 100644 index 0000000..2d27245 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/fw_cfg_if.h @@ -0,0 +1,76 @@ +/* + * This are the qemu firmware config interface defines and structs. + * Copyed over from qemu soure tree, include/hw/nvram/fw_cfg.h + */ + +#define FW_CFG_SIGNATURE 0x00 +#define FW_CFG_ID 0x01 +#define FW_CFG_UUID 0x02 +#define FW_CFG_RAM_SIZE 0x03 +#define FW_CFG_NOGRAPHIC 0x04 +#define FW_CFG_NB_CPUS 0x05 +#define FW_CFG_MACHINE_ID 0x06 +#define FW_CFG_KERNEL_ADDR 0x07 +#define FW_CFG_KERNEL_SIZE 0x08 +#define FW_CFG_KERNEL_CMDLINE 0x09 +#define FW_CFG_INITRD_ADDR 0x0a +#define FW_CFG_INITRD_SIZE 0x0b +#define FW_CFG_BOOT_DEVICE 0x0c +#define FW_CFG_NUMA 0x0d +#define FW_CFG_BOOT_MENU 0x0e +#define FW_CFG_MAX_CPUS 0x0f +#define FW_CFG_KERNEL_ENTRY 0x10 +#define FW_CFG_KERNEL_DATA 0x11 +#define FW_CFG_INITRD_DATA 0x12 +#define FW_CFG_CMDLINE_ADDR 0x13 +#define FW_CFG_CMDLINE_SIZE 0x14 +#define FW_CFG_CMDLINE_DATA 0x15 +#define FW_CFG_SETUP_ADDR 0x16 +#define FW_CFG_SETUP_SIZE 0x17 +#define FW_CFG_SETUP_DATA 0x18 +#define FW_CFG_FILE_DIR 0x19 + +#define FW_CFG_FILE_FIRST 0x20 +#define FW_CFG_FILE_SLOTS 0x10 +#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS) + +#define FW_CFG_WRITE_CHANNEL 0x4000 +#define FW_CFG_ARCH_LOCAL 0x8000 +#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL) + +#define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0) +#define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1) +#define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2) +#define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3) +#define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) + +#define FW_CFG_INVALID 0xffff + +typedef struct FWCfgFile { + uint32_t size; /* file size */ + uint16_t select; /* write this to 0x510 to read it */ + uint16_t reserved; + char name[56]; +} FWCfgFile; + +typedef struct FWCfgFiles { + uint32_t count; + FWCfgFile f[]; +} FWCfgFiles; + +typedef struct FwCfgE820Entry { + uint64_t address; + uint64_t length; + uint32_t type; +} FwCfgE820Entry __attribute((__aligned__(4))); + + +#define SMBIOS_FIELD_ENTRY 0 +#define SMBIOS_TABLE_ENTRY 1 + +typedef struct FwCfgSmbios { + uint16_t length; + uint8_t headertype; + uint8_t tabletype; + uint16_t fieldoffset; +} FwCfgSmbios; diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/irq_tables.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/irq_tables.c new file mode 100644 index 0000000..21eeabf --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/irq_tables.c @@ -0,0 +1,35 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x01<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x7, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x0, 0x0}, + {0x00,(0x02<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x1, 0x0}, + {0x00,(0x03<<3)|0x0, {{0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0x0def8}}, 0x2, 0x0}, + {0x00,(0x04<<3)|0x0, {{0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0x0def8}}, 0x3, 0x0}, + {0x00,(0x05<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x4, 0x0}, + {0x00,(0x06<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x5, 0x0}, + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/mainboard.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/mainboard.c new file mode 100644 index 0000000..a8a61c4 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/mainboard.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org + * Copyright (C) 2010 Kevin O'Connor kevin@koconnor.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <pc80/keyboard.h> +#include <arch/io.h> + +static const unsigned char qemu_i440fx_irqs[] = { + 11, 10, 10, 11, + 11, 10, 10, 11, +}; + +static void qemu_nb_init(device_t dev) +{ + /* Map memory at 0xc0000 - 0xfffff */ + int i; + uint8_t v = pci_read_config8(dev, 0x59); + v |= 0x30; + pci_write_config8(dev, 0x59, v); + for (i=0; i<6; i++) + pci_write_config8(dev, 0x5a + i, 0x33); + + /* This sneaked in here, because Qemu does not + * emulate a SuperIO chip + */ + pc_keyboard_init(); + + /* setup IRQ routing */ + for (i = 0; i < 32; i++) + pci_assign_irqs(0, i, qemu_i440fx_irqs + (i % 4)); +} + +static struct device_operations nb_operations = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = qemu_nb_init, + .ops_pci = 0, +}; + +static const struct pci_driver nb_driver __pci_driver = { + .ops = &nb_operations, + .vendor = 0x8086, + .device = 0x1237, +}; diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/memory.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/memory.c new file mode 100644 index 0000000..a189d75 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/memory.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <cbmem.h> + +#define CMOS_ADDR_PORT 0x70 +#define CMOS_DATA_PORT 0x71 + +#define HIGH_RAM_ADDR 0x35 +#define LOW_RAM_ADDR 0x34 + +#define HIGH_HIGHRAM_ADDR 0x5d +#define MID_HIGHRAM_ADDR 0x5c +#define LOW_HIGHRAM_ADDR 0x5b + +static unsigned long qemu_get_memory_size(void) +{ + unsigned long tomk; + outb (HIGH_RAM_ADDR, CMOS_ADDR_PORT); + tomk = ((unsigned long) inb(CMOS_DATA_PORT)) << 14; + outb (LOW_RAM_ADDR, CMOS_ADDR_PORT); + tomk |= ((unsigned long) inb(CMOS_DATA_PORT)) << 6; + tomk += 16 * 1024; + return tomk; +} + +unsigned long get_top_of_ram(void) +{ + return qemu_get_memory_size() * 1024; +} diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/northbridge.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/northbridge.c new file mode 100644 index 0000000..0f8c0c2 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/northbridge.c @@ -0,0 +1,296 @@ +#include <console/console.h> +#include <cpu/cpu.h> +#include <cpu/x86/lapic_def.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <stdint.h> +#include <device/device.h> +#include <device/pci.h> +#include <stdlib.h> +#include <string.h> +#include <delay.h> +#include <smbios.h> +#include <cbmem.h> + +#include "fw_cfg.h" +#include "fw_cfg_if.h" + +#include "memory.c" + +static unsigned long qemu_get_high_memory_size(void) +{ + unsigned long high; + outb (HIGH_HIGHRAM_ADDR, CMOS_ADDR_PORT); + high = ((unsigned long) inb(CMOS_DATA_PORT)) << 22; + outb (MID_HIGHRAM_ADDR, CMOS_ADDR_PORT); + high |= ((unsigned long) inb(CMOS_DATA_PORT)) << 14; + outb (LOW_HIGHRAM_ADDR, CMOS_ADDR_PORT); + high |= ((unsigned long) inb(CMOS_DATA_PORT)) << 6; + return high; +} + +static void qemu_reserve_ports(struct device *dev, unsigned int idx, + unsigned int base, unsigned int size, + const char *name) +{ + unsigned int end = base + size -1; + struct resource *res; + + printk(BIOS_DEBUG, "QEMU: reserve ioports 0x%04x-0x%04x [%s]\n", + base, end, name); + res = new_resource(dev, idx); + res->base = base; + res->size = size; + res->limit = 0xffff; + res->flags = IORESOURCE_IO | IORESOURCE_FIXED | IORESOURCE_STORED | + IORESOURCE_ASSIGNED; +} + +static void cpu_pci_domain_set_resources(device_t dev) +{ + assign_resources(dev->link_list); +} + +static void cpu_pci_domain_read_resources(struct device *dev) +{ + u16 nbid = pci_read_config16(dev_find_slot(0, 0), PCI_DEVICE_ID); + int i440fx = (nbid == 0x1237); + int q35 = (nbid == 0x29c0); + struct resource *res; + unsigned long tomk = 0, high; + int idx = 10; + int size; + + pci_domain_read_resources(dev); + + size = fw_cfg_check_file("etc/e820"); + if (size > 0) { + /* supported by qemu 1.7+ */ + FwCfgE820Entry *list = malloc(size); + int i; + fw_cfg_load_file("etc/e820", list); + for (i = 0; i < size/sizeof(*list); i++) { + switch (list[i].type) { + case 1: /* ram */ + printk(BIOS_DEBUG, "QEMU: e820/ram: 0x%08llx +0x%08llx\n", + list[i].address, list[i].length); + if (list[i].address == 0) { + tomk = list[i].length / 1024; + ram_resource(dev, idx++, 0, 640); + ram_resource(dev, idx++, 768, tomk - 768); + } else { + ram_resource(dev, idx++, + list[i].address / 1024, + list[i].length / 1024); + } + break; + case 2: /* reserved */ + printk(BIOS_DEBUG, "QEMU: e820/res: 0x%08llx +0x%08llx\n", + list[i].address, list[i].length); + res = new_resource(dev, idx++); + res->base = list[i].address; + res->size = list[i].length; + res->limit = 0xffffffff; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; + break; + default: + /* skip unknown */ + break; + } + } + free(list); + } + + if (!tomk) { + /* qemu older than 1.7, or reading etc/e820 failed. Fallback to cmos. */ + tomk = qemu_get_memory_size(); + high = qemu_get_high_memory_size(); + printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM below 4G.\n", tomk / 1024); + printk(BIOS_DEBUG, "QEMU: cmos: %lu MiB RAM above 4G.\n", high / 1024); + + /* Report the memory regions. */ + ram_resource(dev, idx++, 0, 640); + ram_resource(dev, idx++, 768, tomk - 768); + if (high) + ram_resource(dev, idx++, 4 * 1024 * 1024, high); + } + + /* Reserve I/O ports used by QEMU */ + qemu_reserve_ports(dev, idx++, 0x0510, 0x02, "firmware-config"); + qemu_reserve_ports(dev, idx++, 0x5658, 0x01, "vmware-port"); + if (i440fx) { + qemu_reserve_ports(dev, idx++, 0xae00, 0x10, "pci-hotplug"); + qemu_reserve_ports(dev, idx++, 0xaf00, 0x20, "cpu-hotplug"); + qemu_reserve_ports(dev, idx++, 0xafe0, 0x04, "piix4-gpe0"); + } + if (inb(CONFIG_CONSOLE_QEMU_DEBUGCON_PORT) == 0xe9) { + qemu_reserve_ports(dev, idx++, CONFIG_CONSOLE_QEMU_DEBUGCON_PORT, 1, + "debugcon"); + } + +#if !CONFIG_DYNAMIC_CBMEM + set_top_of_ram(tomk * 1024); +#endif + + if (q35 && ((tomk * 1024) < 0xb0000000)) { + /* + * Reserve the region between top-of-ram and the + * mmconf xbar (ar 0xb0000000), so coreboot doesn't + * place pci bars there. The region isn't declared as + * pci io window in the acpi tables (_SB.PCI0._CRS). + */ + res = new_resource(dev, idx++); + res->base = tomk * 1024; + res->size = 0xb0000000 - tomk * 1024; + res->limit = 0xffffffff; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; + } + + if (i440fx) { + /* Reserve space for the IOAPIC. This should be in + * the southbridge, but I couldn't tell which device + * to put it in. */ + res = new_resource(dev, 2); + res->base = IO_APIC_ADDR; + res->size = 0x100000UL; + res->limit = 0xffffffffUL; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | + IORESOURCE_STORED | IORESOURCE_ASSIGNED; + } + + /* Reserve space for the LAPIC. There's one in every processor, but + * the space only needs to be reserved once, so we do it here. */ + res = new_resource(dev, 3); + res->base = LOCAL_APIC_ADDR; + res->size = 0x10000UL; + res->limit = 0xffffffffUL; + res->flags = IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | + IORESOURCE_ASSIGNED; +} + +#if CONFIG_GENERATE_SMBIOS_TABLES +static int qemu_get_smbios_data16(int handle, unsigned long *current) +{ + struct smbios_type16 *t = (struct smbios_type16 *)*current; + int len = sizeof(struct smbios_type16); + + memset(t, 0, sizeof(struct smbios_type16)); + t->type = SMBIOS_PHYS_MEMORY_ARRAY; + t->handle = handle; + t->length = len - 2; + t->location = 3; /* Location: System Board */ + t->use = 3; /* System memory */ + t->memory_error_correction = 3; /* No error correction */ + t->maximum_capacity = qemu_get_memory_size(); + *current += len; + return len; +} + +static int qemu_get_smbios_data17(int handle, int parent_handle, unsigned long *current) +{ + struct smbios_type17 *t = (struct smbios_type17 *)*current; + int len; + + memset(t, 0, sizeof(struct smbios_type17)); + t->type = SMBIOS_MEMORY_DEVICE; + t->handle = handle; + t->phys_memory_array_handle = parent_handle; + t->length = sizeof(struct smbios_type17) - 2; + t->size = qemu_get_memory_size() / 1024; + t->data_width = 64; + t->total_width = 64; + t->form_factor = 9; /* DIMM */ + t->device_locator = smbios_add_string(t->eos, "Virtual"); + t->memory_type = 0x12; /* DDR */ + t->type_detail = 0x80; /* Synchronous */ + t->speed = 200; + t->clock_speed = 200; + t->manufacturer = smbios_add_string(t->eos, CONFIG_MAINBOARD_VENDOR); + len = t->length + smbios_string_table_len(t->eos); + *current += len; + return len; +} + +static int qemu_get_smbios_data(device_t dev, int *handle, unsigned long *current) +{ + int len; + len = qemu_get_smbios_data16(*handle, current); + len += qemu_get_smbios_data17(*handle+1, *handle, current); + *handle += 2; + return len; +} +#endif +static struct device_operations pci_domain_ops = { + .read_resources = cpu_pci_domain_read_resources, + .set_resources = cpu_pci_domain_set_resources, + .enable_resources = NULL, + .init = NULL, + .scan_bus = pci_domain_scan_bus, + .ops_pci_bus = pci_bus_default_ops, +#if CONFIG_GENERATE_SMBIOS_TABLES + .get_smbios_data = qemu_get_smbios_data, +#endif +}; + +static void cpu_bus_init(device_t dev) +{ + initialize_cpus(dev->link_list); +} + +static unsigned int cpu_bus_scan(device_t bus, unsigned int max) +{ + int max_cpus = fw_cfg_max_cpus(); + device_t cpu; + int i; + + if (max_cpus < 0) + return 0; + + /* + * TODO: This only handles the simple "qemu -smp $nr" case + * correctly. qemu also allows to specify the number of + * cores, threads & sockets. + */ + printk(BIOS_INFO, "QEMU: max_cpus is %d\n", max_cpus); + for (i = 0; i < max_cpus; i++) { + cpu = add_cpu_device(bus->link_list, i, 1); + if (cpu) + set_cpu_topology(cpu, 1, 0, i, 0); + } + return max_cpus; +} + +static void cpu_bus_noop(device_t dev) +{ +} + +static struct device_operations cpu_bus_ops = { + .read_resources = cpu_bus_noop, + .set_resources = cpu_bus_noop, + .enable_resources = cpu_bus_noop, + .init = cpu_bus_init, + .scan_bus = cpu_bus_scan, +}; + +static void northbridge_enable(struct device *dev) +{ + /* Set the operations if it is a special bus type */ + if (dev->path.type == DEVICE_PATH_DOMAIN) { + dev->ops = &pci_domain_ops; + } + else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { + dev->ops = &cpu_bus_ops; + } +} + +struct chip_operations mainboard_emulation_qemu_i440fx_ops = { + CHIP_NAME("QEMU Northbridge i440fx") + .enable_dev = northbridge_enable, +}; + +struct chip_operations mainboard_emulation_qemu_q35_ops = { + CHIP_NAME("QEMU Northbridge q35") + .enable_dev = northbridge_enable, +}; diff --git a/src/mainboard/emulation/qemu_x86_i440fx_piix4/romstage.c b/src/mainboard/emulation/qemu_x86_i440fx_piix4/romstage.c new file mode 100644 index 0000000..6c17645 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_i440fx_piix4/romstage.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Stefan Reinauer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <timestamp.h> +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" + +#include "memory.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int cbmem_was_initted; + + /* init_timer(); */ + post_code(0x05); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + //print_pci_devices(); + //dump_pci_devices(); + + cbmem_was_initted = !cbmem_recovery(0); + + timestamp_init(rdtsc()); + timestamp_add_now(TS_START_ROMSTAGE); + +} diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/Kconfig b/src/mainboard/emulation/qemu_x86_q35_ich9/Kconfig new file mode 100644 index 0000000..52d9f87 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/Kconfig @@ -0,0 +1,47 @@ +if BOARD_EMULATION_QEMU_X86_Q35 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_QEMU_X86 + select SOUTHBRIDGE_INTEL_I82801IX + select IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS + select MMCONF_SUPPORT + select MMCONF_SUPPORT_DEFAULT +# select HAVE_OPTION_TABLE +# select HAVE_PIRQ_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_256 + select DYNAMIC_CBMEM + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_DO_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + +config MAINBOARD_DIR + string + default emulation/qemu_x86_q35_ich9 + +config MAINBOARD_PART_NUMBER + string + default "QEMU x86 q35/ich9" + +config BOOTBLOCK_MAINBOARD_INIT + string + default "mainboard/emulation/qemu_x86_q35_ich9/bootblock.c" + +#config IRQ_SLOT_COUNT +# int +# default 6 + +config MMCONF_BASE_ADDRESS + hex + default 0xb0000000 + +config DCACHE_RAM_BASE + hex + default 0xd0000 + +config DCACHE_RAM_SIZE + hex + default 0x10000 + +endif # BOARD_EMULATION_QEMU_X86_Q35 diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/Makefile.inc b/src/mainboard/emulation/qemu_x86_q35_ich9/Makefile.inc new file mode 100644 index 0000000..d6f0d17 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/Makefile.inc @@ -0,0 +1,3 @@ +cpu_incs += $(src)/mainboard/emulation/qemu_x86_i440fx_piix4/cache_as_ram.inc +ramstage-y += ../qemu_x86_i440fx_piix4/northbridge.c +ramstage-y += ../qemu_x86_i440fx_piix4/fw_cfg.c diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/acpi_tables.c b/src/mainboard/emulation/qemu_x86_q35_ich9/acpi_tables.c new file mode 100644 index 0000000..bad55a4 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/acpi_tables.c @@ -0,0 +1,345 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +#include "../qemu_x86_i440fx_piix4/fw_cfg.h" + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 0x00; + fadt->preferred_pm_profile = PM_MOBILE; + fadt->sci_int = 0x9; + fadt->smi_cmd = 0; + fadt->acpi_enable = 0; + fadt->acpi_disable = 0; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; /* Upper word is reserved and + Linux complains about 32 bit. */ + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 0x39; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x00; + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_DOCKING_SUPPORTED | ACPI_FADT_RESET_REGISTER | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + fadt->reset_value = 0x06; + + fadt->x_firmware_ctl_l = 0; /* Set X_FIRMWARE_CTRL only if FACS is */ + fadt->x_firmware_ctl_h = 0; /* above 4GB. If X_FIRMWARE_CTRL is set, */ + /* then FIRMWARE_CTRL must be zero. */ + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 0; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; /* Upper word is reserved and + Linux complains about 32 bit. */ + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 0; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 0; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + device_t dev; + u32 reg; + + dev = dev_find_device(0x8086, 0x29c0, 0); + if (!dev) + return current; + + reg = pci_read_config32(dev, 0x60); + if ((reg & 0x07) != 0x01) // require enabled + 256MB size + return current; + + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, + reg & 0xf0000000, 0x0, 0x0, 255); + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = fw_cfg_acpi_tables(start); + if (current) + return current; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/board_info.txt b/src/mainboard/emulation/qemu_x86_q35_ich9/board_info.txt new file mode 100644 index 0000000..6938d86 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/board_info.txt @@ -0,0 +1,2 @@ +Category: emulation +Board URL: http://fabrice.bellard.free.fr/qemu/ diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/bootblock.c b/src/mainboard/emulation/qemu_x86_q35_ich9/bootblock.c new file mode 100644 index 0000000..939a4e6 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/bootblock.c @@ -0,0 +1,33 @@ +#include <arch/io.h> + +/* Just define these here, there is no gm35.h file to include. */ +#define D0F0_PCIEXBAR_LO 0x60 +#define D0F0_PCIEXBAR_HI 0x64 + +static void bootblock_northbridge_init(void) +{ + uint32_t reg; + + /* + * The "io" variant of the config access is explicitly used to + * setup the PCIEXBAR because CONFIG_MMCONF_SUPPORT_DEFAULT is set to + * to true. That way all subsequent non-explicit config accesses use + * MCFG. This code also assumes that bootblock_northbridge_init() is + * the first thing called in the non-asm boot block code. The final + * assumption is that no assembly code is using the + * CONFIG_MMCONF_SUPPORT_DEFAULT option to do PCI config acceses. + * + * The PCIEXBAR is assumed to live in the memory mapped IO space under + * 4GiB. + */ + reg = 0; + pci_io_write_config32(PCI_DEV(0,0,0), D0F0_PCIEXBAR_HI, reg); + reg = CONFIG_MMCONF_BASE_ADDRESS | 1; /* 256MiB - 0-255 buses. */ + pci_io_write_config32(PCI_DEV(0,0,0), D0F0_PCIEXBAR_LO, reg); +} + +static void bootblock_mainboard_init(void) +{ + bootblock_northbridge_init(); + bootblock_southbridge_init(); +} diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/devicetree.cb b/src/mainboard/emulation/qemu_x86_q35_ich9/devicetree.cb new file mode 100644 index 0000000..d404cb5 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/devicetree.cb @@ -0,0 +1,39 @@ +chip mainboard/emulation/qemu_x86_q35_ich9 + device cpu_cluster 0 on + chip cpu/qemu-x86 + device lapic 0 on end + end + end + device domain 0 on + device pci 0.0 on end # northbridge (q35) + chip southbridge/intel/i82801ix + # present unconditionally + device pci 1f.0 on end # LPC + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + + # presence depends in qemu config + # (see docs/q35-chipset.cfg in qemu src tree) + device pci 1a.0 on end # UHCI #4 + device pci 1a.1 on end # UHCI #5 + device pci 1a.2 on end # UHCI #6 + device pci 1a.7 on end # EHCI #2 + device pci 1b.0 on end # HD Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 + device pci 1c.4 on end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 + device pci 1d.0 on end # UHCI #1 + device pci 1d.1 on end # UHCI #2 + device pci 1d.2 on end # UHCI #3 + device pci 1d.7 on end # EHCI #1 + + # not present (not emulated by qemu) + device pci 19.0 off end + device pci 1f.5 off end + device pci 1f.6 off end + end + end +end diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/dsdt.asl b/src/mainboard/emulation/qemu_x86_q35_ich9/dsdt.asl new file mode 100644 index 0000000..ca492c4 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/dsdt.asl @@ -0,0 +1,454 @@ +/* + * Bochs/QEMU ACPI DSDT ASL definition + * + * Copyright (c) 2006 Fabrice Bellard + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +/* + * Copyright (c) 2010 Isaku Yamahata + * yamahata at valinux co jp + * Based on acpi-dsdt.dsl, but heavily modified for q35 chipset. + */ + +DefinitionBlock ( + "dsdt.aml", // Output Filename + "DSDT", // Signature + 0x01, // DSDT Compliance Revision + "CORE", // OEMID + "COREBOOT", // TABLE ID + 0x2 // OEM Revision + ) +{ + +#include "../qemu_x86_i440fx_piix4/acpi/dbug.asl" + + Scope(_SB) { + OperationRegion(PCST, SystemIO, 0xae00, 0x0c) + OperationRegion(PCSB, SystemIO, 0xae0c, 0x01) + Field(PCSB, AnyAcc, NoLock, WriteAsZeros) { + PCIB, 8, + } + } + + +/**************************************************************** + * PCI Bus definition + ****************************************************************/ + + Scope(_SB) { + Device(PCI0) { + Name(_HID, EisaId("PNP0A08")) + Name(_CID, EisaId("PNP0A03")) + Name(_ADR, 0x00) + Name(_UID, 1) + + // _OSC: based on sample of ACPI3.0b spec + Name(SUPP, 0) // PCI _OSC Support Field value + Name(CTRL, 0) // PCI _OSC Control Field value + Method(_OSC, 4) { + // Create DWORD-addressable fields from the Capabilities Buffer + CreateDWordField(Arg3, 0, CDW1) + + // Check for proper UUID + If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) { + // Create DWORD-addressable fields from the Capabilities Buffer + CreateDWordField(Arg3, 4, CDW2) + CreateDWordField(Arg3, 8, CDW3) + + // Save Capabilities DWORD2 & 3 + Store(CDW2, SUPP) + Store(CDW3, CTRL) + + // Always allow native PME, AER (no dependencies) + // Never allow SHPC (no SHPC controller in this system) + And(CTRL, 0x1D, CTRL) + +#if 0 // For now, nothing to do + If (Not(And(CDW1, 1))) { // Query flag clear? + // Disable GPEs for features granted native control. + If (And(CTRL, 0x01)) { // Hot plug control granted? + Store(0, HPCE) // clear the hot plug SCI enable bit + Store(1, HPCS) // clear the hot plug SCI status bit + } + If (And(CTRL, 0x04)) { // PME control granted? + Store(0, PMCE) // clear the PME SCI enable bit + Store(1, PMCS) // clear the PME SCI status bit + } + If (And(CTRL, 0x10)) { // OS restoring PCI Express cap structure? + // Set status to not restore PCI Express cap structure + // upon resume from S3 + Store(1, S3CR) + } + } +#endif + If (LNotEqual(Arg1, One)) { + // Unknown revision + Or(CDW1, 0x08, CDW1) + } + If (LNotEqual(CDW3, CTRL)) { + // Capabilities bits were masked + Or(CDW1, 0x10, CDW1) + } + // Update DWORD3 in the buffer + Store(CTRL, CDW3) + } Else { + Or(CDW1, 4, CDW1) // Unrecognized UUID + } + Return (Arg3) + } + } + } + +#include "../qemu_x86_i440fx_piix4/acpi/pci-crs.asl" +#include "../qemu_x86_i440fx_piix4/acpi/hpet.asl" + + +/**************************************************************** + * VGA + ****************************************************************/ + + Scope(_SB.PCI0) { + Device(VGA) { + Name(_ADR, 0x00010000) + Method(_S1D, 0, NotSerialized) { + Return (0x00) + } + Method(_S2D, 0, NotSerialized) { + Return (0x00) + } + Method(_S3D, 0, NotSerialized) { + Return (0x00) + } + } + } + + +/**************************************************************** + * LPC ISA bridge + ****************************************************************/ + + Scope(_SB.PCI0) { + /* PCI D31:f0 LPC ISA bridge */ + Device(ISA) { + /* PCI D31:f0 */ + Name(_ADR, 0x001f0000) + + /* ICH9 PCI to ISA irq remapping */ + OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C) + + OperationRegion(LPCD, PCI_Config, 0x80, 0x2) + Field(LPCD, AnyAcc, NoLock, Preserve) { + COMA, 3, + , 1, + COMB, 3, + + Offset(0x01), + LPTD, 2, + , 2, + FDCD, 2 + } + OperationRegion(LPCE, PCI_Config, 0x82, 0x2) + Field(LPCE, AnyAcc, NoLock, Preserve) { + CAEN, 1, + CBEN, 1, + LPEN, 1, + FDEN, 1 + } + } + } + +#include "../qemu_x86_i440fx_piix4/acpi/isa.asl" + + +/**************************************************************** + * PCI IRQs + ****************************************************************/ + + /* Zero => PIC mode, One => APIC Mode */ + Name(\PICF, Zero) + Method(_PIC, 1, NotSerialized) { + Store(Arg0, \PICF) + } + + Scope(_SB) { + Scope(PCI0) { +#define prt_slot_lnk(nr, lnk0, lnk1, lnk2, lnk3) \ + Package() { nr##ffff, 0, lnk0, 0 }, \ + Package() { nr##ffff, 1, lnk1, 0 }, \ + Package() { nr##ffff, 2, lnk2, 0 }, \ + Package() { nr##ffff, 3, lnk3, 0 } + +#define prt_slot_lnkA(nr) prt_slot_lnk(nr, LNKA, LNKB, LNKC, LNKD) +#define prt_slot_lnkB(nr) prt_slot_lnk(nr, LNKB, LNKC, LNKD, LNKA) +#define prt_slot_lnkC(nr) prt_slot_lnk(nr, LNKC, LNKD, LNKA, LNKB) +#define prt_slot_lnkD(nr) prt_slot_lnk(nr, LNKD, LNKA, LNKB, LNKC) + +#define prt_slot_lnkE(nr) prt_slot_lnk(nr, LNKE, LNKF, LNKG, LNKH) +#define prt_slot_lnkF(nr) prt_slot_lnk(nr, LNKF, LNKG, LNKH, LNKE) +#define prt_slot_lnkG(nr) prt_slot_lnk(nr, LNKG, LNKH, LNKE, LNKF) +#define prt_slot_lnkH(nr) prt_slot_lnk(nr, LNKH, LNKE, LNKF, LNKG) + + Name(PRTP, Package() { + prt_slot_lnkE(0x0000), + prt_slot_lnkF(0x0001), + prt_slot_lnkG(0x0002), + prt_slot_lnkH(0x0003), + prt_slot_lnkE(0x0004), + prt_slot_lnkF(0x0005), + prt_slot_lnkG(0x0006), + prt_slot_lnkH(0x0007), + prt_slot_lnkE(0x0008), + prt_slot_lnkF(0x0009), + prt_slot_lnkG(0x000a), + prt_slot_lnkH(0x000b), + prt_slot_lnkE(0x000c), + prt_slot_lnkF(0x000d), + prt_slot_lnkG(0x000e), + prt_slot_lnkH(0x000f), + prt_slot_lnkE(0x0010), + prt_slot_lnkF(0x0011), + prt_slot_lnkG(0x0012), + prt_slot_lnkH(0x0013), + prt_slot_lnkE(0x0014), + prt_slot_lnkF(0x0015), + prt_slot_lnkG(0x0016), + prt_slot_lnkH(0x0017), + prt_slot_lnkE(0x0018), + + /* INTA -> PIRQA for slot 25 - 31 + see the default value of D<N>IR */ + prt_slot_lnkA(0x0019), + prt_slot_lnkA(0x001a), + prt_slot_lnkA(0x001b), + prt_slot_lnkA(0x001c), + prt_slot_lnkA(0x001d), + + /* PCIe->PCI bridge. use PIRQ[E-H] */ + prt_slot_lnkE(0x001e), + + prt_slot_lnkA(0x001f) + }) + +#define prt_slot_gsi(nr, gsi0, gsi1, gsi2, gsi3) \ + Package() { nr##ffff, 0, gsi0, 0 }, \ + Package() { nr##ffff, 1, gsi1, 0 }, \ + Package() { nr##ffff, 2, gsi2, 0 }, \ + Package() { nr##ffff, 3, gsi3, 0 } + +#define prt_slot_gsiA(nr) prt_slot_gsi(nr, GSIA, GSIB, GSIC, GSID) +#define prt_slot_gsiB(nr) prt_slot_gsi(nr, GSIB, GSIC, GSID, GSIA) +#define prt_slot_gsiC(nr) prt_slot_gsi(nr, GSIC, GSID, GSIA, GSIB) +#define prt_slot_gsiD(nr) prt_slot_gsi(nr, GSID, GSIA, GSIB, GSIC) + +#define prt_slot_gsiE(nr) prt_slot_gsi(nr, GSIE, GSIF, GSIG, GSIH) +#define prt_slot_gsiF(nr) prt_slot_gsi(nr, GSIF, GSIG, GSIH, GSIE) +#define prt_slot_gsiG(nr) prt_slot_gsi(nr, GSIG, GSIH, GSIE, GSIF) +#define prt_slot_gsiH(nr) prt_slot_gsi(nr, GSIH, GSIE, GSIF, GSIG) + + Name(PRTA, Package() { + prt_slot_gsiE(0x0000), + prt_slot_gsiF(0x0001), + prt_slot_gsiG(0x0002), + prt_slot_gsiH(0x0003), + prt_slot_gsiE(0x0004), + prt_slot_gsiF(0x0005), + prt_slot_gsiG(0x0006), + prt_slot_gsiH(0x0007), + prt_slot_gsiE(0x0008), + prt_slot_gsiF(0x0009), + prt_slot_gsiG(0x000a), + prt_slot_gsiH(0x000b), + prt_slot_gsiE(0x000c), + prt_slot_gsiF(0x000d), + prt_slot_gsiG(0x000e), + prt_slot_gsiH(0x000f), + prt_slot_gsiE(0x0010), + prt_slot_gsiF(0x0011), + prt_slot_gsiG(0x0012), + prt_slot_gsiH(0x0013), + prt_slot_gsiE(0x0014), + prt_slot_gsiF(0x0015), + prt_slot_gsiG(0x0016), + prt_slot_gsiH(0x0017), + prt_slot_gsiE(0x0018), + + /* INTA -> PIRQA for slot 25 - 31, but 30 + see the default value of D<N>IR */ + prt_slot_gsiA(0x0019), + prt_slot_gsiA(0x001a), + prt_slot_gsiA(0x001b), + prt_slot_gsiA(0x001c), + prt_slot_gsiA(0x001d), + + /* PCIe->PCI bridge. use PIRQ[E-H] */ + prt_slot_gsiE(0x001e), + + prt_slot_gsiA(0x001f) + }) + + Method(_PRT, 0, NotSerialized) { + /* PCI IRQ routing table, example from ACPI 2.0a specification, + section 6.2.8.1 */ + /* Note: we provide the same info as the PCI routing + table of the Bochs BIOS */ + If (LEqual(\PICF, Zero)) { + Return (PRTP) + } Else { + Return (PRTA) + } + } + } + + Field(PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve) { + PRQA, 8, + PRQB, 8, + PRQC, 8, + PRQD, 8, + + Offset(0x08), + PRQE, 8, + PRQF, 8, + PRQG, 8, + PRQH, 8 + } + + Method(IQST, 1, NotSerialized) { + // _STA method - get status + If (And(0x80, Arg0)) { + Return (0x09) + } + Return (0x0B) + } + Method(IQCR, 1, NotSerialized) { + // _CRS method - get current settings + Name(PRR0, ResourceTemplate() { + Interrupt(, Level, ActiveHigh, Shared) { 0 } + }) + CreateDWordField(PRR0, 0x05, PRRI) + Store(And(Arg0, 0x0F), PRRI) + Return (PRR0) + } + +#define define_link(link, uid, reg) \ + Device(link) { \ + Name(_HID, EISAID("PNP0C0F")) \ + Name(_UID, uid) \ + Name(_PRS, ResourceTemplate() { \ + Interrupt(, Level, ActiveHigh, Shared) { \ + 5, 10, 11 \ + } \ + }) \ + Method(_STA, 0, NotSerialized) { \ + Return (IQST(reg)) \ + } \ + Method(_DIS, 0, NotSerialized) { \ + Or(reg, 0x80, reg) \ + } \ + Method(_CRS, 0, NotSerialized) { \ + Return (IQCR(reg)) \ + } \ + Method(_SRS, 1, NotSerialized) { \ + CreateDWordField(Arg0, 0x05, PRRI) \ + Store(PRRI, reg) \ + } \ + } + + define_link(LNKA, 0, PRQA) + define_link(LNKB, 1, PRQB) + define_link(LNKC, 2, PRQC) + define_link(LNKD, 3, PRQD) + define_link(LNKE, 4, PRQE) + define_link(LNKF, 5, PRQF) + define_link(LNKG, 6, PRQG) + define_link(LNKH, 7, PRQH) + +#define define_gsi_link(link, uid, gsi) \ + Device(link) { \ + Name(_HID, EISAID("PNP0C0F")) \ + Name(_UID, uid) \ + Name(_PRS, ResourceTemplate() { \ + Interrupt(, Level, ActiveHigh, Shared) { \ + gsi \ + } \ + }) \ + Name(_CRS, ResourceTemplate() { \ + Interrupt(, Level, ActiveHigh, Shared) { \ + gsi \ + } \ + }) \ + Method(_SRS, 1, NotSerialized) { \ + } \ + } + + define_gsi_link(GSIA, 0, 0x10) + define_gsi_link(GSIB, 0, 0x11) + define_gsi_link(GSIC, 0, 0x12) + define_gsi_link(GSID, 0, 0x13) + define_gsi_link(GSIE, 0, 0x14) + define_gsi_link(GSIF, 0, 0x15) + define_gsi_link(GSIG, 0, 0x16) + define_gsi_link(GSIH, 0, 0x17) + } + +#if 0 +#include "../qemu_x86_i440fx_piix4/acpi/cpu-hotplug.asl" +#endif + + +/**************************************************************** + * General purpose events + ****************************************************************/ + + Scope(_GPE) { + Name(_HID, "ACPI0006") + + Method(_L00) { + } + Method(_L01) { +#if 0 + // CPU hotplug event + _SB.PRSC() +#endif + } + Method(_L02) { + } + Method(_L03) { + } + Method(_L04) { + } + Method(_L05) { + } + Method(_L06) { + } + Method(_L07) { + } + Method(_L08) { + } + Method(_L09) { + } + Method(_L0A) { + } + Method(_L0B) { + } + Method(_L0C) { + } + Method(_L0D) { + } + Method(_L0E) { + } + Method(_L0F) { + } + } +} diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/hda_verb.c b/src/mainboard/emulation/qemu_x86_q35_ich9/hda_verb.c new file mode 100644 index 0000000..072a306 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/hda_verb.c @@ -0,0 +1,7 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/mainboard.c b/src/mainboard/emulation/qemu_x86_q35_ich9/mainboard.c new file mode 100644 index 0000000..e991b53 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/mainboard.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Stefan Reinauer stefan.reinauer@coreboot.org + * Copyright (C) 2010 Kevin O'Connor kevin@koconnor.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <pc80/keyboard.h> +#include <arch/io.h> +#include <console/console.h> + +#define Q35_PAM0 0x90 + +static const unsigned char qemu_q35_irqs[] = { + 10, 10, 11, 11, + 10, 10, 11, 11, +}; + +static void qemu_nb_init(device_t dev) +{ + /* Map memory at 0xc0000 - 0xfffff */ + int i; + uint8_t v = pci_read_config8(dev, Q35_PAM0); + v |= 0x30; + pci_write_config8(dev, Q35_PAM0, v); + pci_write_config8(dev, Q35_PAM0 + 1, 0x33); + pci_write_config8(dev, Q35_PAM0 + 2, 0x33); + pci_write_config8(dev, Q35_PAM0 + 3, 0x33); + pci_write_config8(dev, Q35_PAM0 + 4, 0x33); + pci_write_config8(dev, Q35_PAM0 + 5, 0x33); + pci_write_config8(dev, Q35_PAM0 + 6, 0x33); + + /* This sneaked in here, because Qemu does not + * emulate a SuperIO chip + */ + pc_keyboard_init(); + + /* setup IRQ routing for pci slots */ + for (i = 0; i < 25; i++) + pci_assign_irqs(0, i, qemu_q35_irqs + (i % 4)); + /* setup IRQ routing southbridge devices */ + for (i = 25; i < 32; i++) + pci_assign_irqs(0, i, qemu_q35_irqs); +} + +static void qemu_nb_read_resources(struct device *dev) +{ + pci_dev_read_resources(dev); + + /* reserve mmconfig */ + fixed_mem_resource(dev, 2, CONFIG_MMCONF_BASE_ADDRESS >> 10, 0x10000000 >> 10, + IORESOURCE_RESERVE); +} + + +static struct device_operations nb_operations = { + .read_resources = qemu_nb_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = qemu_nb_init, + .ops_pci = 0, +}; + +static const struct pci_driver nb_driver __pci_driver = { + .ops = &nb_operations, + .vendor = 0x8086, + .device = 0x29c0, +}; diff --git a/src/mainboard/emulation/qemu_x86_q35_ich9/romstage.c b/src/mainboard/emulation/qemu_x86_q35_ich9/romstage.c new file mode 100644 index 0000000..d9864c9 --- /dev/null +++ b/src/mainboard/emulation/qemu_x86_q35_ich9/romstage.c @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Stefan Reinauer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <southbridge/intel/i82801ix/i82801ix.h> +#include <cpu/x86/bist.h> +#include <timestamp.h> +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" + +#include "../qemu_x86_i440fx_piix4/memory.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int cbmem_was_initted; + + /* init_timer(); */ + post_code(0x05); + + i82801ix_early_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + //print_pci_devices(); + //dump_pci_devices(); + + cbmem_was_initted = !cbmem_recovery(0); + + timestamp_init(rdtsc()); + timestamp_add_now(TS_START_ROMSTAGE); + +} diff --git a/src/mainboard/gigabyte/Kconfig b/src/mainboard/gigabyte/Kconfig index ff96a17..80563d3 100644 --- a/src/mainboard/gigabyte/Kconfig +++ b/src/mainboard/gigabyte/Kconfig @@ -27,24 +27,24 @@ config BOARD_GIGABYTE_GA_6BXC bool "GA-6BXC" config BOARD_GIGABYTE_GA_6BXE bool "GA-6BXE" -config BOARD_GIGABYTE_M57SLI +config BOARD_GIGABYTE_GA_M57SLI_S4 bool "GA-M57SLI-S4" -config BOARD_GIGABYTE_MA785GMT +config BOARD_GIGABYTE_GA_MA785GMT_UD2H bool "GA-MA785GMT-UD2H" -config BOARD_GIGABYTE_MA785GM +config BOARD_GIGABYTE_GA_MA785GM_US2H bool "GA-MA785GM-US2H" -config BOARD_GIGABYTE_MA78GM +config BOARD_GIGABYTE_GA_MA78GM_US2H bool "GA-MA78GM-US2H"
endchoice
source "src/mainboard/gigabyte/ga_2761gxdk/Kconfig" -source "src/mainboard/gigabyte/ga-6bxc/Kconfig" -source "src/mainboard/gigabyte/ga-6bxe/Kconfig" -source "src/mainboard/gigabyte/m57sli/Kconfig" -source "src/mainboard/gigabyte/ma785gmt/Kconfig" -source "src/mainboard/gigabyte/ma785gm/Kconfig" -source "src/mainboard/gigabyte/ma78gm/Kconfig" +source "src/mainboard/gigabyte/ga_6bxc/Kconfig" +source "src/mainboard/gigabyte/ga_6bxe/Kconfig" +source "src/mainboard/gigabyte/ga_m57sli_s4/Kconfig" +source "src/mainboard/gigabyte/ga_ma785gmt_ud2h/Kconfig" +source "src/mainboard/gigabyte/ga_ma785gm_us2h/Kconfig" +source "src/mainboard/gigabyte/ga_ma78gm_us2h/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/gigabyte/ga-6bxc/Kconfig b/src/mainboard/gigabyte/ga-6bxc/Kconfig deleted file mode 100644 index 8ea1abd..0000000 --- a/src/mainboard/gigabyte/ga-6bxc/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_GIGABYTE_GA_6BXC - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_ITE_IT8671F - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default gigabyte/ga-6bxc - -config MAINBOARD_PART_NUMBER - string - default "GA-6BXC" - -config IRQ_SLOT_COUNT - int - default 6 - -endif # BOARD_GIGABYTE_GA_6BXC diff --git a/src/mainboard/gigabyte/ga-6bxc/board_info.txt b/src/mainboard/gigabyte/ga-6bxc/board_info.txt deleted file mode 100644 index ac2a58e..0000000 --- a/src/mainboard/gigabyte/ga-6bxc/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=1445#sp -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/gigabyte/ga-6bxc/devicetree.cb b/src/mainboard/gigabyte/ga-6bxc/devicetree.cb deleted file mode 100644 index 5b5c1ae..0000000 --- a/src/mainboard/gigabyte/ga-6bxc/devicetree.cb +++ /dev/null @@ -1,57 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/ite/it8671f # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.2 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.4 on # APC - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 3f0.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 3f0.7 on # GPIO - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/gigabyte/ga-6bxc/irq_tables.c b/src/mainboard/gigabyte/ga-6bxc/irq_tables.c deleted file mode 100644 index 0314a34..0000000 --- a/src/mainboard/gigabyte/ga-6bxc/irq_tables.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x8, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x08<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x09<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0b<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x07<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/gigabyte/ga-6bxc/romstage.c b/src/mainboard/gigabyte/ga-6bxc/romstage.c deleted file mode 100644 index e0a248b..0000000 --- a/src/mainboard/gigabyte/ga-6bxc/romstage.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/ite/it8671f/it8671f.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, IT8671F_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/gigabyte/ga-6bxe/Kconfig b/src/mainboard/gigabyte/ga-6bxe/Kconfig deleted file mode 100644 index 5b35e7d..0000000 --- a/src/mainboard/gigabyte/ga-6bxe/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_GIGABYTE_GA_6BXE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_ITE_IT8671F - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - select SDRAMPWR_4DIMM - -config MAINBOARD_DIR - string - default gigabyte/ga-6bxe - -config MAINBOARD_PART_NUMBER - string - default "GA-6BXE" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_GIGABYTE_GA_6BXE diff --git a/src/mainboard/gigabyte/ga-6bxe/board_info.txt b/src/mainboard/gigabyte/ga-6bxe/board_info.txt deleted file mode 100644 index dc1457d..0000000 --- a/src/mainboard/gigabyte/ga-6bxe/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=1430#sp -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/gigabyte/ga-6bxe/devicetree.cb b/src/mainboard/gigabyte/ga-6bxe/devicetree.cb deleted file mode 100644 index 85f4785..0000000 --- a/src/mainboard/gigabyte/ga-6bxe/devicetree.cb +++ /dev/null @@ -1,57 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/ite/it8671f # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.2 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.4 on # APC - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 3f0.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 3f0.7 on # GPIO - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/gigabyte/ga-6bxe/irq_tables.c b/src/mainboard/gigabyte/ga-6bxe/irq_tables.c deleted file mode 100644 index 1bf573e..0000000 --- a/src/mainboard/gigabyte/ga-6bxe/irq_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router dev */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xb4, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x08 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, - {0x00, (0x09 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, - {0x00, (0x0c << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x5, 0x0}, - {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/gigabyte/ga-6bxe/romstage.c b/src/mainboard/gigabyte/ga-6bxe/romstage.c deleted file mode 100644 index 5d69510..0000000 --- a/src/mainboard/gigabyte/ga-6bxe/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/ite/it8671f/it8671f.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, IT8671F_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - it8671f_48mhz_clkin(); - it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/gigabyte/ga_6bxc/Kconfig b/src/mainboard/gigabyte/ga_6bxc/Kconfig new file mode 100644 index 0000000..4473a5c --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxc/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_GIGABYTE_GA_6BXC + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_ITE_IT8671F + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default gigabyte/ga_6bxc + +config MAINBOARD_PART_NUMBER + string + default "GA-6BXC" + +config IRQ_SLOT_COUNT + int + default 6 + +endif # BOARD_GIGABYTE_GA_6BXC diff --git a/src/mainboard/gigabyte/ga_6bxc/board_info.txt b/src/mainboard/gigabyte/ga_6bxc/board_info.txt new file mode 100644 index 0000000..ac2a58e --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxc/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=1445#sp +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/gigabyte/ga_6bxc/devicetree.cb b/src/mainboard/gigabyte/ga_6bxc/devicetree.cb new file mode 100644 index 0000000..5b5c1ae --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxc/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.2 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.4 on # APC + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 3f0.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 3f0.7 on # GPIO + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/gigabyte/ga_6bxc/irq_tables.c b/src/mainboard/gigabyte/ga_6bxc/irq_tables.c new file mode 100644 index 0000000..0314a34 --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxc/irq_tables.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x8, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x08<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x09<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x07<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/gigabyte/ga_6bxc/romstage.c b/src/mainboard/gigabyte/ga_6bxc/romstage.c new file mode 100644 index 0000000..e0a248b --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxc/romstage.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/ite/it8671f/it8671f.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, IT8671F_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/gigabyte/ga_6bxe/Kconfig b/src/mainboard/gigabyte/ga_6bxe/Kconfig new file mode 100644 index 0000000..77c3cba --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxe/Kconfig @@ -0,0 +1,45 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2010 Anders Jenbo anders@jenbo.dk +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_GIGABYTE_GA_6BXE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_ITE_IT8671F + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + select SDRAMPWR_4DIMM + +config MAINBOARD_DIR + string + default gigabyte/ga_6bxe + +config MAINBOARD_PART_NUMBER + string + default "GA-6BXE" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_GIGABYTE_GA_6BXE diff --git a/src/mainboard/gigabyte/ga_6bxe/board_info.txt b/src/mainboard/gigabyte/ga_6bxe/board_info.txt new file mode 100644 index 0000000..dc1457d --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxe/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=1430#sp +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/gigabyte/ga_6bxe/devicetree.cb b/src/mainboard/gigabyte/ga_6bxe/devicetree.cb new file mode 100644 index 0000000..85f4785 --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxe/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.2 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.4 on # APC + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 3f0.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 3f0.7 on # GPIO + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/gigabyte/ga_6bxe/irq_tables.c b/src/mainboard/gigabyte/ga_6bxe/irq_tables.c new file mode 100644 index 0000000..1bf573e --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxe/irq_tables.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router dev */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xb4, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x08 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x09 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, + {0x00, (0x0c << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x5, 0x0}, + {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/gigabyte/ga_6bxe/romstage.c b/src/mainboard/gigabyte/ga_6bxe/romstage.c new file mode 100644 index 0000000..5d69510 --- /dev/null +++ b/src/mainboard/gigabyte/ga_6bxe/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Anders Jenbo anders@jenbo.dk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/ite/it8671f/it8671f.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, IT8671F_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + it8671f_48mhz_clkin(); + it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/Kconfig b/src/mainboard/gigabyte/ga_m57sli_s4/Kconfig new file mode 100644 index 0000000..f073983 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/Kconfig @@ -0,0 +1,80 @@ +if BOARD_GIGABYTE_GA_M57SLI_S4 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_ITE_IT8716F + select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + select SET_FIDVID + +config MAINBOARD_DIR + string + default gigabyte/ga_m57sli_s4 + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "GA-M57SLI-S4" + +config PCI_64BIT_PREF_MEM + bool + default n + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config IRQ_SLOT_COUNT + int + default 11 + +config MCP55_PCI_E_X_0 + int + default 0 + +endif # BOARD_GIGABYTE_GA_M57SLI_S4 diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/Makefile.inc b/src/mainboard/gigabyte/ga_m57sli_s4/Makefile.inc new file mode 100644 index 0000000..2329bbd --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/acpi_tables.c b/src/mainboard/gigabyte/ga_m57sli_s4/acpi_tables.c new file mode 100644 index 0000000..13e7649 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/acpi_tables.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "northbridge/amd/amdk8/acpi.h" +#include <cpu/amd/powernow.h> +#include <device/pci.h> +#include <cpu/amd/amdk8_sysconf.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + extern unsigned char bus_mcp55[8]; + extern unsigned apicid_mcp55; + + unsigned sbdn; + struct resource *res; + device_t dev; + + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + apicid_mcp55, res->base, 0); + } + } + + /* Write NB IOAPIC. */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + apicid_mcp55++, res->base, gsi_base); + } + } + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/board_info.txt b/src/mainboard/gigabyte/ga_m57sli_s4/board_info.txt new file mode 100644 index 0000000..3e591f4 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=2287#ov +ROM socketed: n +Flashrom support: y +Vendor cooperation score: 3 +Vendor cooperation page: Gigabyte m57sli Vendor Cooperation Score diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/cmos.layout b/src/mainboard/gigabyte/ga_m57sli_s4/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/devicetree.cb b/src/mainboard/gigabyte/ga_m57sli_s4/devicetree.cb new file mode 100644 index 0000000..efbf76e --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/devicetree.cb @@ -0,0 +1,154 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_AM2 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end +end +device domain 0 on # PCI domain + subsystemid 0x1022 0x2b80 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/ite/it8716f # Super I/O + device pnp 2e.0 on # Floppy and any LDN + # Watchdog from CLKIN (24 MHz) + irq 0x23 = 0x11 + # Serial Flash (SPI only) + # 0x24 = 0x1a + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Embedded controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO, SPI flash + # Pin 84 is not GP10 + irq 0x25 = 0x0 + # Pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 + irq 0x26 = 0x43 + # Pin 13 is GP35 + irq 0x27 = 0x20 + # Pin 70 is not GP46 + # irq 0x28 = 0x0 + # Pin 6,3,128,127,126 is GP63,64,65,66,67 + irq 0x29 = 0x81 + # Enable FAN_CTL/FAN_TAC set to 5 (pin 21, 23), + # enable FAN_CTL/FAN_TAC set to 4 (pin 20, 22), + # pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal + # voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal + # voltage divider for VCC5V + # irq 0x2c = 0x1f + # Simple I/O base + io 0x62 = 0x800 + # Serial Flash I/O (SPI only) + io 0x64 = 0x820 + # Watchdog force timeout (parallel flash only) + # irq 0x71 = 0x1 + # No WDT interrupt + irq 0x72 = 0x0 + # GPIO pin set 1 disable internal pullup + irq 0xb8 = 0x0 + # GPIO pin set 5 enable internal pullup + irq 0xbc = 0x01 + # SIO pin set 1 alternate function + # irq 0xc0 = 0x0 + # SIO pin set 2 mixed function + irq 0xc1 = 0x43 + # SIO pin set 3 mixed function + irq 0xc2 = 0x20 + # SIO pin set 4 alternate function + # irq 0xc3 = 0x0 + # SIO pin set 1 input mode + # irq 0xc8 = 0x0 + # SIO pin set 2 input mode + irq 0xc9 = 0x0 + # SIO pin set 4 input mode + # irq 0xcb = 0x0 + # Generate SMI# on EC IRQ + # irq 0xf0 = 0x10 + # SMI# level trigger + # irq 0xf1 = 0x40 + # HWMON alert beep pin location + irq 0xf6 = 0x28 + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 10 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # Consumer IR + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on end # PCI + device pci 6.1 on end # AUDIO + device pci 8.0 on end # NIC + device pci 9.0 off end # N/A + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/dsdt.asl b/src/mainboard/gigabyte/ga_m57sli_s4/dsdt.asl new file mode 100644 index 0000000..3df689d --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/dsdt.asl @@ -0,0 +1,304 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ + }) + + Device (PEBF) /* PCI-E Bridge F */ + { + Name (_ADR, 0x000F0000) + Name (_UID, 0x00) + Name (_BBN, 0x07) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBE) /* PCI-E Bridge E */ + { + Name (_ADR, 0x000E0000) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PEBD) /* PCI-E Bridge D */ + { + Name (_ADR, 0x000D0000) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, + }) + } + + Device (PEBC) /* PCI-E Bridge C */ + { + Name (_ADR, 0x000C0000) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + }) + } + + Device (PEBB) /* PCI-E Bridge B */ + { + Name (_ADR, 0x000B0000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBA) /* PCI-E Bridge A */ + { + Name (_ADR, 0x000A0000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PCID) /* PCI Device */ + { + Name (_ADR, 0x00060000) + Name (_UID, 0x00) + Name (_BBN, 0x01) + Name (_PRT, Package () { + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ + Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ + Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ + Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, + }) + } + } + + Device (ISA) { + Name (_ADR, 0x000010000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP0, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP0) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP1, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {12} + }) + Return (TMP1) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) + IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + /* Parallel Port */ + Device (LPT1) + { + Name (_HID, EisaId ("PNP0400")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) + IRQNoFlags () {7} + }) + Return (BUF1) + } + } + /* Parallel Port ECP */ + Device (ECP1) + { + Name (_HID, EisaId ("PNP0401")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) + IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) + IRQNoFlags() {7} + DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} + }) + Return (BUF1) + } + } + } + } +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/fanctl.c b/src/mainboard/gigabyte/ga_m57sli_s4/fanctl.c new file mode 100644 index 0000000..07a2666 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/fanctl.c @@ -0,0 +1,81 @@ +#include <arch/io.h> +#include <stdlib.h> +#include <superio/ite/it8716f/it8716f.h> + +static void write_index(uint16_t port_base, uint8_t reg, uint8_t value) +{ + outb(reg, port_base); + outb(value, port_base + 1); +} + +static const struct { + uint8_t index, value; +} sequence[]= { + /* Make sure we can monitor, and enable SMI# interrupt output */ + { 0x00, 0x13}, + /* Disable fan interrupt status bits for SMI# */ + { 0x04, 0x37}, + /* Disable VIN interrupt status bits for SMI# */ + { 0x05, 0xff}, + /* Disable fan interrupt status bits for IRQ */ + { 0x07, 0x37}, + /* Disable VIN interrupt status bits for IRQ */ + { 0x08, 0xff}, + /* Disable external sensor interrupt */ + { 0x09, 0x87}, + /* Enable 16 bit counter divisors */ + { 0x0c, 0x07}, + /* Set FAN_CTL control register (0x14) polarity to high, and + activate fans 1, 2 and 3. */ + { 0x14, 0xd7}, + /* set the correct sensor types 1,2 thermistor; 3 diode */ + { 0x51, 0x1c}, + /* set the 'zero' voltage for diode type sensor 3 */ + { 0x5c, 0x80}, +// { 0x56, 0xe5}, +// { 0x57, 0xe5}, + { 0x59, 0xec}, + { 0x5c, 0x00}, + /* fan1 (controlled by temp3) control parameters */ + /* fan off limit */ + { 0x60, 0xff}, + /* fan start limit */ + { 0x61, 0x14}, + /* ???? */ +// { 0x62, 0x00}, + /* start PWM */ + { 0x63, 0x27}, + /* smooth and slope PWM */ + { 0x64, 0x90}, + /* direct-down and interval */ + { 0x65, 0x03}, + /* temperature limit of fan stop for fan3 (automatic) */ + { 0x70, 0xff}, + /* temperature limit of fan start for fan3 (automatic) */ + { 0x71, 0x14}, + /* Set PWM start & slope for fan3 */ + { 0x73, 0x20}, + /* Initialize PWM automatic mode slope values for fan3 */ + { 0x74, 0x90}, + /* set smartguardian temperature interval for fan3 */ + { 0x75, 0x03}, + /* fan1 auto controlled by temp3 */ + { 0x15, 0x82}, + /* fan2 auto controlled by temp3 */ + { 0x16, 0x82}, + /* fan3 auto controlled by temp3 */ + { 0x17, 0x82}, + /* all fans enable, fan1 ctl smart */ + { 0x13, 0x77} +}; + +/* + * Called from superio.c + */ +void init_ec(uint16_t base) +{ + int i; + for (i=0; i<ARRAY_SIZE(sequence); i++) { + write_index(base, sequence[i].index, sequence[i].value); + } +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/get_bus_conf.c b/src/mainboard/gigabyte/ga_m57sli_s4/get_bus_conf.c new file mode 100644 index 0000000..c798415 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/get_bus_conf.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + unsigned sbdn; + + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + for (i = 0; i < 8; i++) { + bus_mcp55[i] = 0; + } + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); + + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; + +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/irq_tables.c b/src/mainboard/gigabyte/ga_m57sli_s4/irq_tables.c new file mode 100644 index 0000000..e8a1ea0 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/irq_tables.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern unsigned char bus_mcp55[8]; //1 + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/mainboard.c b/src/mainboard/gigabyte/ga_m57sli_s4/mainboard.c new file mode 100644 index 0000000..291d4f7 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/mainboard.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/mptable.c b/src/mainboard/gigabyte/ga_m57sli_s4/mptable.c new file mode 100644 index 0000000..1536823 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/mptable.c @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_mcp55[8]; //1 + +extern unsigned apicid_mcp55; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned sbdn; + int i, j, k, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + } + /* set up the interrupt registers of mcp55 */ + pci_write_config32(dev, 0x7c, 0xc643c643); + pci_write_config32(dev, 0x80, 0x8da01009); + pci_write_config32(dev, 0x84, 0x200018d2); + } + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); + +/* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\ + bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin)) + + PCI_INT(0,sbdn+1,1, 10); /* SMBus */ + PCI_INT(0,sbdn+2,0, 22); /* USB */ + PCI_INT(0,sbdn+2,1, 23); /* USB */ + PCI_INT(0,sbdn+4,0, 21); /* IDE */ + PCI_INT(0,sbdn+5,0, 20); /* SATA */ + PCI_INT(0,sbdn+5,1, 21); /* SATA */ + PCI_INT(0,sbdn+5,2, 22); /* SATA */ + PCI_INT(0,sbdn+6,1, 23); /* HD Audio */ + PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */ + + /* The PCIe slots, each on its own bus */ + k = 1; + for(i=0; i<4; i++){ + for(j=7; j>1; j--){ + if(k>3) k=0; + PCI_INT(j,0,i, 16+k); + k++; + } + k--; + } + + /* On bus 1: the PCI bus slots... + physical PCI slots are j = 7,8 + FireWire is j = 10 + */ + k=2; + for(i=0; i<4; i++){ + for(j=6; j<11; j++){ + if(k>3) k=0; + PCI_INT(1,j,i, 16+k); + k++; + } + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/resourcemap.c b/src/mainboard/gigabyte/ga_m57sli_s4/resourcemap.c new file mode 100644 index 0000000..96879de --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/resourcemap.c @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/gigabyte/ga_m57sli_s4/romstage.c b/src/mainboard/gigabyte/ga_m57sli_s4/romstage.c new file mode 100644 index 0000000..b2e1d70 --- /dev/null +++ b/src/mainboard/gigabyte/ga_m57sli_s4/romstage.c @@ -0,0 +1,208 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8716f/it8716f.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) +#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x68,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x68,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x68,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + +#if 0 + uint8_t tmp = 0; + pnp_enter_ext_func_mode(SERIAL_DEV); + /* The following line will set CLKIN to 24 MHz, external */ + pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11); + tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP); + /* Is serial flash enabled? Then enable writing to serial flash. */ + if (tmp & 0x0e) { + pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP, tmp | 0x10); + pnp_set_logical_device(GPIO_DEV); + /* Set Serial Flash interface to 0x0820 */ + pnp_write_config(GPIO_DEV, 0x64, 0x08); + pnp_write_config(GPIO_DEV, 0x65, 0x20); + } + it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); + pnp_exit_ext_func_mode(SERIAL_DEV); +#endif + ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48); + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + setup_mb_resource_map(); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); + + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } +#endif + + init_timer(); // Need to use TMICT to synconize FID/VID + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + /* all ap stopped? */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/Kconfig b/src/mainboard/gigabyte/ga_ma785gm_us2h/Kconfig new file mode 100644 index 0000000..aaa20a0 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/Kconfig @@ -0,0 +1,76 @@ +if BOARD_GIGABYTE_GA_MA785GM_US2H + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_ITE_IT8718F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default gigabyte/ga_ma785gm_us2h + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "GA-MA785GM-US2H" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif # BOARD_GIGABYTE_GA_MA785GM_US2H diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/cpstate.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/ide.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/routing.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/routing.asl new file mode 100644 index 0000000..7b54b24 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/routing.asl @@ -0,0 +1,300 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTA, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0014FFFF, 0, 0, 16 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/sata.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/usb.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi_tables.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi_tables.c new file mode 100644 index 0000000..4c0cb77 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/acpi_tables.c @@ -0,0 +1,222 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/board_info.txt b/src/mainboard/gigabyte/ga_ma785gm_us2h/board_info.txt new file mode 100644 index 0000000..d8160bf --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +Board URL: http://www.gigabyte.us/products/product-page.aspx?pid=3447#sp diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/cmos.layout b/src/mainboard/gigabyte/ga_ma785gm_us2h/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/devicetree.cb b/src/mainboard/gigabyte/ga_ma785gm_us2h/devicetree.cb new file mode 100644 index 0000000..28b2807 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/devicetree.cb @@ -0,0 +1,115 @@ +# sample config for gigabyte/ga_ma785gm_us2h +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3060 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9601 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 off end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 off end # + device pci a.0 on end # PCIE P2P bridge 0x9609 + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "2" + + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8718f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8718f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end #domain + #for node 32 to node 63 +end diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/dsdt.asl b/src/mainboard/gigabyte/ga_ma785gm_us2h/dsdt.asl new file mode 100644 index 0000000..cb9de50 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "GIGA ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/get_bus_conf.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/irq_tables.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/irq_tables.c new file mode 100644 index 0000000..87c414a --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs780[8]; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/mainboard.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/mainboard.c new file mode 100644 index 0000000..cd06069 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/mainboard.c @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Alec Ari neotheuser@ymail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +void set_pcie_dereset(void); +void set_pcie_reset(void); +int is_dev3_present(void); + +void set_pcie_dereset() +{ + u8 byte; + u16 word; + device_t sm_dev; + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 1 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte |= ((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 1 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word |= (1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +void set_pcie_reset() +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 0 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte &= ~((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 0 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word &= ~(1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +/* + * dev3 does not exist on ma785gm + */ +int is_dev3_present(void) +{ + return 0; +} + +/* + * set gpio40 gfx + */ +static void set_gpio40_gfx(void) +{ + u8 byte; +// u16 word; + u32 dword; + device_t sm_dev; + /* disable the GPIO40 as CLKREQ2# function */ + byte = pm_ioread(0xd3); + byte &= ~(1 << 7); + pm_iowrite(0xd3, byte); + + /* disable the GPIO40 as CLKREQ3# function */ + byte = pm_ioread(0xd4); + byte &= ~(1 << 0); + pm_iowrite(0xd4, byte); + + /* enable pull up for GPIO68 */ + byte = pm2_ioread(0xf1); + byte &= ~(1 << 4); + pm2_iowrite(0xf1, byte); + + /* access the smbus extended register */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* set the gfx to 1x16 lanes */ + printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n"); + /* when the gpio40 is configured as GPIO, this will enable the output */ + pci_write_config32(sm_dev, 0xf8, 0x4); + dword = pci_read_config32(sm_dev, 0xfc); + dword &= ~(1 << 10); + + /* When the gpio40 is configured as GPIO, this will represent the output value*/ + /* 1 :enable two x8 , 0 : master slot enable only */ + dword &= ~(1 << 26); + pci_write_config32(sm_dev, 0xfc, dword); +} + +/************************************************* +* enable the dedicated function in ma785gm board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard MA785GM-US2H Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ + set_gpio40_gfx(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/mb_sysconf.h b/src/mainboard/gigabyte/ga_ma785gm_us2h/mb_sysconf.h new file mode 100644 index 0000000..25d63d5 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/mb_sysconf.h @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/mptable.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/resourcemap.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/gigabyte/ga_ma785gm_us2h/romstage.c b/src/mainboard/gigabyte/ga_ma785gm_us2h/romstage.c new file mode 100644 index 0000000..a0f9e76 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gm_us2h/romstage.c @@ -0,0 +1,251 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8718f/it8718f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8718f_disable_reboot(GPIO_DEV); + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/Kconfig b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/Kconfig new file mode 100644 index 0000000..55b26b4 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/Kconfig @@ -0,0 +1,76 @@ +if BOARD_GIGABYTE_GA_MA785GMT_UD2H + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM3 + select DIMM_DDR3 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_ITE_IT8718F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default gigabyte/ga_ma785gmt_ud2h + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "GA-MA785GMT-UD2H" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif # BOARD_GIGABYTE_GA_MA785GMT_UD2H diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/cpstate.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/ide.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/routing.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/routing.asl new file mode 100644 index 0000000..7b54b24 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/routing.asl @@ -0,0 +1,300 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTA, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0014FFFF, 0, 0, 16 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/sata.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/usb.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi_tables.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi_tables.c new file mode 100644 index 0000000..a9e72eb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/acpi_tables.c @@ -0,0 +1,220 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/board_info.txt b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/board_info.txt new file mode 100644 index 0000000..fea4649 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=3156#ov diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/cmos.layout b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/devicetree.cb b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/devicetree.cb new file mode 100644 index 0000000..666d558 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/devicetree.cb @@ -0,0 +1,115 @@ +# sample config for gigabyte/ga_ma785gmt_ud2h +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM3 #L1 and DDR3 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3060 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "2" + + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8718f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8718f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end #domain + #for node 32 to node 63 +end diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/dsdt.asl b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/dsdt.asl new file mode 100644 index 0000000..cb9de50 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "GIGA ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/get_bus_conf.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/irq_tables.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/irq_tables.c new file mode 100644 index 0000000..87c414a --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs780[8]; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mainboard.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mainboard.c new file mode 100644 index 0000000..89b50bb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mainboard.c @@ -0,0 +1,259 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ + +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + +void set_pcie_dereset(void); +void set_pcie_reset(void); +int is_dev3_present(void); + +void set_pcie_dereset() +{ + u8 byte; + u16 word; + device_t sm_dev; + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 1 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte |= ((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 1 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word |= (1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +void set_pcie_reset() +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ + /* set 0 to bit2 :disable GPM8 as AZ_RST output */ + byte = pm_ioread(0x8d); + byte &= ~((1 << 1) | (1 << 2)); + pm_iowrite(0x8d, byte); + + /* set the GPM8 and GPM9 output enable and the value to 0 */ + byte = pm_ioread(0x94); + byte &= ~((1 << 2) | (1 << 3)); + byte &= ~((1 << 0) | (1 << 1)); + pm_iowrite(0x94, byte); + + /* set the GPIO65 output enable and the value is 0 */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x7e); + word &= ~(1 << 0); + word &= ~(1 << 4); + pci_write_config16(sm_dev, 0x7e, word); +} + +/* + * justify the dev3 is exist or not + */ +int is_dev3_present(void) +{ + u16 word; + device_t sm_dev; + + /* access the smbus extended register */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* put the GPIO68 output to tristate */ + word = pci_read_config16(sm_dev, 0x7e); + word |= 1 << 6; + pci_write_config16(sm_dev, 0x7e,word); + + /* read the GPIO68 input status */ + word = pci_read_config16(sm_dev, 0x7e); + + if(word & (1 << 10)){ + /*not exist*/ + return 0; + }else{ + /*exist*/ + return 1; + } +} + +/* + * set gpio40 gfx + */ +static void set_gpio40_gfx(void) +{ + u8 byte; +// u16 word; + u32 dword; + device_t sm_dev; + /* disable the GPIO40 as CLKREQ2# function */ + byte = pm_ioread(0xd3); + byte &= ~(1 << 7); + pm_iowrite(0xd3, byte); + + /* disable the GPIO40 as CLKREQ3# function */ + byte = pm_ioread(0xd4); + byte &= ~(1 << 0); + pm_iowrite(0xd4, byte); + + /* enable pull up for GPIO68 */ + byte = pm2_ioread(0xf1); + byte &= ~(1 << 4); + pm2_iowrite(0xf1, byte); + + /* access the smbus extended register */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /*if the dev3 is present, set the gfx to 2x8 lanes*/ + /*otherwise set the gfx to 1x16 lanes*/ + if(is_dev3_present()){ + + printk(BIOS_INFO, "Dev3 is present. GFX Configuration is Two x8 slots\n"); + /* when the gpio40 is configured as GPIO, this will enable the output */ + pci_write_config32(sm_dev, 0xf8, 0x4); + dword = pci_read_config32(sm_dev, 0xfc); + dword &= ~(1 << 10); + + /* When the gpio40 is configured as GPIO, this will represent the output value*/ + /* 1 :enable two x8 , 0 : master slot enable only */ + dword |= (1 << 26); + pci_write_config32(sm_dev, 0xfc, dword); + + }else{ + printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n"); + /* when the gpio40 is configured as GPIO, this will enable the output */ + pci_write_config32(sm_dev, 0xf8, 0x4); + dword = pci_read_config32(sm_dev, 0xfc); + dword &= ~(1 << 10); + + /* When the gpio40 is configured as GPIO, this will represent the output value*/ + /* 1 :enable two x8 , 0 : master slot enable only */ + dword &= ~(1 << 26); + pci_write_config32(sm_dev, 0xfc, dword); + } +} + +/* + * set thermal config + */ +static void set_thermal_config(void) +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb700 settings for thermal config */ + /* set SB700 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/************************************************* +* enable the dedicated function in ma785gmt board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard MA785GMT-UD2H Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ + set_thermal_config(); + set_gpio40_gfx(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mptable.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/resourcemap.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/gigabyte/ga_ma785gmt_ud2h/romstage.c b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/romstage.c new file mode 100644 index 0000000..a0f9e76 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma785gmt_ud2h/romstage.c @@ -0,0 +1,251 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8718f/it8718f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8718f_disable_reboot(GPIO_DEV); + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/Kconfig b/src/mainboard/gigabyte/ga_ma78gm_us2h/Kconfig new file mode 100644 index 0000000..2ce5a90 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/Kconfig @@ -0,0 +1,76 @@ +if BOARD_GIGABYTE_GA_MA78GM_US2H + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2R2 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_ITE_IT8718F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default gigabyte/ga_ma78gm_us2h + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "GA-MA78GM-US2H" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_01000095.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif # BOARD_GIGABYTE_GA_MA78GM_US2H diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/cpstate.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/ide.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/routing.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/routing.asl new file mode 100644 index 0000000..bbcc61d --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/routing.asl @@ -0,0 +1,311 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0012FFFF, 2, INTC, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTD, 0 }, + Package(){0x0013FFFF, 2, INTA, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0012FFFF, 2, 0, 18 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0013FFFF, 2, 0, 16 }, + + /* Package(){0x00140000, 0, 0, 16 }, */ + + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/sata.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/usb.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi_tables.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi_tables.c new file mode 100644 index 0000000..a9e72eb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/acpi_tables.c @@ -0,0 +1,220 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/board_info.txt b/src/mainboard/gigabyte/ga_ma78gm_us2h/board_info.txt new file mode 100644 index 0000000..b4643c0 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=2995#ov diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/cmos.layout b/src/mainboard/gigabyte/ga_ma78gm_us2h/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/devicetree.cb b/src/mainboard/gigabyte/ga_ma78gm_us2h/devicetree.cb new file mode 100644 index 0000000..ae7725a --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/devicetree.cb @@ -0,0 +1,115 @@ +# sample config for gigabyte/ga_ma78gm_us2h +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM2r2 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3060 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 off end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "1" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8718f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8718f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end +# device pci 00.5 on end + end + end #domain + #for node 32 to node 63 +end diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/dsdt.asl b/src/mainboard/gigabyte/ga_ma78gm_us2h/dsdt.asl new file mode 100644 index 0000000..cb9de50 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "GIGA ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/get_bus_conf.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/irq_tables.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/irq_tables.c new file mode 100644 index 0000000..87c414a --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs780[8]; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/mainboard.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/mainboard.c new file mode 100644 index 0000000..49df0c2 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/mainboard.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +void set_pcie_dereset(void); +void set_pcie_reset(void); +u8 is_dev3_present(void); +/* + * ma78gm-us2h uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to + * pull it up before training the slot. + ***/ +void set_pcie_dereset() +{ + u16 word; + device_t sm_dev; + /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + word = pci_read_config16(sm_dev, 0xA8); + word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */ + word &= ~((1 << 8) | (1 << 10)); + pci_write_config16(sm_dev, 0xA8, word); +} + +void set_pcie_reset() +{ + u16 word; + device_t sm_dev; + /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + word = pci_read_config16(sm_dev, 0xA8); + word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */ + word &= ~((1 << 8) | (1 << 10)); + pci_write_config16(sm_dev, 0xA8, word); +} + + +u8 is_dev3_present(void) +{ + return 0; +} + +/************************************************* +* enable the dedicated function in board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard MA78GM-US2H Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/mptable.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/resourcemap.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/gigabyte/ga_ma78gm_us2h/romstage.c b/src/mainboard/gigabyte/ga_ma78gm_us2h/romstage.c new file mode 100644 index 0000000..b9d27f7 --- /dev/null +++ b/src/mainboard/gigabyte/ga_ma78gm_us2h/romstage.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8718f/it8718f.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8718f_disable_reboot(GPIO_DEV); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/gigabyte/m57sli/Kconfig b/src/mainboard/gigabyte/m57sli/Kconfig deleted file mode 100644 index 6ef94ce..0000000 --- a/src/mainboard/gigabyte/m57sli/Kconfig +++ /dev/null @@ -1,80 +0,0 @@ -if BOARD_GIGABYTE_M57SLI - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_ITE_IT8716F - select SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default gigabyte/m57sli - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "GA-M57SLI-S4" - -config PCI_64BIT_PREF_MEM - bool - default n - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 0 - -endif # BOARD_GIGABYTE_M57SLI diff --git a/src/mainboard/gigabyte/m57sli/Makefile.inc b/src/mainboard/gigabyte/m57sli/Makefile.inc deleted file mode 100644 index 2329bbd..0000000 --- a/src/mainboard/gigabyte/m57sli/Makefile.inc +++ /dev/null @@ -1,20 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-$(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) += fanctl.c diff --git a/src/mainboard/gigabyte/m57sli/acpi_tables.c b/src/mainboard/gigabyte/m57sli/acpi_tables.c deleted file mode 100644 index 13e7649..0000000 --- a/src/mainboard/gigabyte/m57sli/acpi_tables.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <cpu/amd/powernow.h> -#include <device/pci.h> -#include <cpu/amd/amdk8_sysconf.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - extern unsigned char bus_mcp55[8]; - extern unsigned apicid_mcp55; - - unsigned sbdn; - struct resource *res; - device_t dev; - - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_mcp55, res->base, 0); - } - } - - /* Write NB IOAPIC. */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_mcp55++, res->base, gsi_base); - } - } - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/gigabyte/m57sli/board_info.txt b/src/mainboard/gigabyte/m57sli/board_info.txt deleted file mode 100644 index 3e591f4..0000000 --- a/src/mainboard/gigabyte/m57sli/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=2287#ov -ROM socketed: n -Flashrom support: y -Vendor cooperation score: 3 -Vendor cooperation page: Gigabyte m57sli Vendor Cooperation Score diff --git a/src/mainboard/gigabyte/m57sli/cmos.layout b/src/mainboard/gigabyte/m57sli/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/gigabyte/m57sli/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/m57sli/devicetree.cb b/src/mainboard/gigabyte/m57sli/devicetree.cb deleted file mode 100644 index efbf76e..0000000 --- a/src/mainboard/gigabyte/m57sli/devicetree.cb +++ /dev/null @@ -1,154 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end -end -device domain 0 on # PCI domain - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/ite/it8716f # Super I/O - device pnp 2e.0 on # Floppy and any LDN - # Watchdog from CLKIN (24 MHz) - irq 0x23 = 0x11 - # Serial Flash (SPI only) - # 0x24 = 0x1a - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Embedded controller - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO, SPI flash - # Pin 84 is not GP10 - irq 0x25 = 0x0 - # Pin 21 is GP26, pin 26 is GP21, pin 27 is GP20 - irq 0x26 = 0x43 - # Pin 13 is GP35 - irq 0x27 = 0x20 - # Pin 70 is not GP46 - # irq 0x28 = 0x0 - # Pin 6,3,128,127,126 is GP63,64,65,66,67 - irq 0x29 = 0x81 - # Enable FAN_CTL/FAN_TAC set to 5 (pin 21, 23), - # enable FAN_CTL/FAN_TAC set to 4 (pin 20, 22), - # pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal - # voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal - # voltage divider for VCC5V - # irq 0x2c = 0x1f - # Simple I/O base - io 0x62 = 0x800 - # Serial Flash I/O (SPI only) - io 0x64 = 0x820 - # Watchdog force timeout (parallel flash only) - # irq 0x71 = 0x1 - # No WDT interrupt - irq 0x72 = 0x0 - # GPIO pin set 1 disable internal pullup - irq 0xb8 = 0x0 - # GPIO pin set 5 enable internal pullup - irq 0xbc = 0x01 - # SIO pin set 1 alternate function - # irq 0xc0 = 0x0 - # SIO pin set 2 mixed function - irq 0xc1 = 0x43 - # SIO pin set 3 mixed function - irq 0xc2 = 0x20 - # SIO pin set 4 alternate function - # irq 0xc3 = 0x0 - # SIO pin set 1 input mode - # irq 0xc8 = 0x0 - # SIO pin set 2 input mode - irq 0xc9 = 0x0 - # SIO pin set 4 input mode - # irq 0xcb = 0x0 - # Generate SMI# on EC IRQ - # irq 0xf0 = 0x10 - # SMI# level trigger - # irq 0xf1 = 0x40 - # HWMON alert beep pin location - irq 0xf6 = 0x28 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 10 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # Consumer IR - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on end # PCI - device pci 6.1 on end # AUDIO - device pci 8.0 on end # NIC - device pci 9.0 off end # N/A - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/gigabyte/m57sli/dsdt.asl b/src/mainboard/gigabyte/m57sli/dsdt.asl deleted file mode 100644 index 3df689d..0000000 --- a/src/mainboard/gigabyte/m57sli/dsdt.asl +++ /dev/null @@ -1,304 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ - }) - - Device (PEBF) /* PCI-E Bridge F */ - { - Name (_ADR, 0x000F0000) - Name (_UID, 0x00) - Name (_BBN, 0x07) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBE) /* PCI-E Bridge E */ - { - Name (_ADR, 0x000E0000) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PEBD) /* PCI-E Bridge D */ - { - Name (_ADR, 0x000D0000) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, - }) - } - - Device (PEBC) /* PCI-E Bridge C */ - { - Name (_ADR, 0x000C0000) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - }) - } - - Device (PEBB) /* PCI-E Bridge B */ - { - Name (_ADR, 0x000B0000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBA) /* PCI-E Bridge A */ - { - Name (_ADR, 0x000A0000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PCID) /* PCI Device */ - { - Name (_ADR, 0x00060000) - Name (_UID, 0x00) - Name (_BBN, 0x01) - Name (_PRT, Package () { - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ - Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ - Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, - }) - } - } - - Device (ISA) { - Name (_ADR, 0x000010000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP0, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP0) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP1, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {12} - }) - Return (TMP1) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) - IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - /* Parallel Port */ - Device (LPT1) - { - Name (_HID, EisaId ("PNP0400")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) - IRQNoFlags () {7} - }) - Return (BUF1) - } - } - /* Parallel Port ECP */ - Device (ECP1) - { - Name (_HID, EisaId ("PNP0401")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) - IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) - IRQNoFlags() {7} - DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} - }) - Return (BUF1) - } - } - } - } -} diff --git a/src/mainboard/gigabyte/m57sli/fanctl.c b/src/mainboard/gigabyte/m57sli/fanctl.c deleted file mode 100644 index 07a2666..0000000 --- a/src/mainboard/gigabyte/m57sli/fanctl.c +++ /dev/null @@ -1,81 +0,0 @@ -#include <arch/io.h> -#include <stdlib.h> -#include <superio/ite/it8716f/it8716f.h> - -static void write_index(uint16_t port_base, uint8_t reg, uint8_t value) -{ - outb(reg, port_base); - outb(value, port_base + 1); -} - -static const struct { - uint8_t index, value; -} sequence[]= { - /* Make sure we can monitor, and enable SMI# interrupt output */ - { 0x00, 0x13}, - /* Disable fan interrupt status bits for SMI# */ - { 0x04, 0x37}, - /* Disable VIN interrupt status bits for SMI# */ - { 0x05, 0xff}, - /* Disable fan interrupt status bits for IRQ */ - { 0x07, 0x37}, - /* Disable VIN interrupt status bits for IRQ */ - { 0x08, 0xff}, - /* Disable external sensor interrupt */ - { 0x09, 0x87}, - /* Enable 16 bit counter divisors */ - { 0x0c, 0x07}, - /* Set FAN_CTL control register (0x14) polarity to high, and - activate fans 1, 2 and 3. */ - { 0x14, 0xd7}, - /* set the correct sensor types 1,2 thermistor; 3 diode */ - { 0x51, 0x1c}, - /* set the 'zero' voltage for diode type sensor 3 */ - { 0x5c, 0x80}, -// { 0x56, 0xe5}, -// { 0x57, 0xe5}, - { 0x59, 0xec}, - { 0x5c, 0x00}, - /* fan1 (controlled by temp3) control parameters */ - /* fan off limit */ - { 0x60, 0xff}, - /* fan start limit */ - { 0x61, 0x14}, - /* ???? */ -// { 0x62, 0x00}, - /* start PWM */ - { 0x63, 0x27}, - /* smooth and slope PWM */ - { 0x64, 0x90}, - /* direct-down and interval */ - { 0x65, 0x03}, - /* temperature limit of fan stop for fan3 (automatic) */ - { 0x70, 0xff}, - /* temperature limit of fan start for fan3 (automatic) */ - { 0x71, 0x14}, - /* Set PWM start & slope for fan3 */ - { 0x73, 0x20}, - /* Initialize PWM automatic mode slope values for fan3 */ - { 0x74, 0x90}, - /* set smartguardian temperature interval for fan3 */ - { 0x75, 0x03}, - /* fan1 auto controlled by temp3 */ - { 0x15, 0x82}, - /* fan2 auto controlled by temp3 */ - { 0x16, 0x82}, - /* fan3 auto controlled by temp3 */ - { 0x17, 0x82}, - /* all fans enable, fan1 ctl smart */ - { 0x13, 0x77} -}; - -/* - * Called from superio.c - */ -void init_ec(uint16_t base) -{ - int i; - for (i=0; i<ARRAY_SIZE(sequence); i++) { - write_index(base, sequence[i].index, sequence[i].value); - } -} diff --git a/src/mainboard/gigabyte/m57sli/get_bus_conf.c b/src/mainboard/gigabyte/m57sli/get_bus_conf.c deleted file mode 100644 index c798415..0000000 --- a/src/mainboard/gigabyte/m57sli/get_bus_conf.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/gigabyte/m57sli/irq_tables.c b/src/mainboard/gigabyte/m57sli/irq_tables.c deleted file mode 100644 index e8a1ea0..0000000 --- a/src/mainboard/gigabyte/m57sli/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern unsigned char bus_mcp55[8]; //1 - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/gigabyte/m57sli/mainboard.c b/src/mainboard/gigabyte/m57sli/mainboard.c deleted file mode 100644 index 291d4f7..0000000 --- a/src/mainboard/gigabyte/m57sli/mainboard.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> - - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/gigabyte/m57sli/mptable.c b/src/mainboard/gigabyte/m57sli/mptable.c deleted file mode 100644 index 1536823..0000000 --- a/src/mainboard/gigabyte/m57sli/mptable.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, k, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); - } - /* set up the interrupt registers of mcp55 */ - pci_write_config32(dev, 0x7c, 0xc643c643); - pci_write_config32(dev, 0x80, 0x8da01009); - pci_write_config32(dev, 0x84, 0x200018d2); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - -/* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,\ - bus_mcp55[bus], (((dev)<<2)|(fn)), apicid_mcp55, (pin)) - - PCI_INT(0,sbdn+1,1, 10); /* SMBus */ - PCI_INT(0,sbdn+2,0, 22); /* USB */ - PCI_INT(0,sbdn+2,1, 23); /* USB */ - PCI_INT(0,sbdn+4,0, 21); /* IDE */ - PCI_INT(0,sbdn+5,0, 20); /* SATA */ - PCI_INT(0,sbdn+5,1, 21); /* SATA */ - PCI_INT(0,sbdn+5,2, 22); /* SATA */ - PCI_INT(0,sbdn+6,1, 23); /* HD Audio */ - PCI_INT(0,sbdn+8,0, 20); /* GBit Ethernet */ - - /* The PCIe slots, each on its own bus */ - k = 1; - for(i=0; i<4; i++){ - for(j=7; j>1; j--){ - if(k>3) k=0; - PCI_INT(j,0,i, 16+k); - k++; - } - k--; - } - - /* On bus 1: the PCI bus slots... - physical PCI slots are j = 7,8 - FireWire is j = 10 - */ - k=2; - for(i=0; i<4; i++){ - for(j=6; j<11; j++){ - if(k>3) k=0; - PCI_INT(1,j,i, 16+k); - k++; - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/m57sli/resourcemap.c b/src/mainboard/gigabyte/m57sli/resourcemap.c deleted file mode 100644 index 96879de..0000000 --- a/src/mainboard/gigabyte/m57sli/resourcemap.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c deleted file mode 100644 index b2e1d70..0000000 --- a/src/mainboard/gigabyte/m57sli/romstage.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8716f/it8716f.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) -#define CLKIN_DEV PNP_DEV(0x2e, IT8716F_GPIO) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x68,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x68,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x68,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - -#if 0 - uint8_t tmp = 0; - pnp_enter_ext_func_mode(SERIAL_DEV); - /* The following line will set CLKIN to 24 MHz, external */ - pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_CLOCKSEL, 0x11); - tmp = pnp_read_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP); - /* Is serial flash enabled? Then enable writing to serial flash. */ - if (tmp & 0x0e) { - pnp_write_config(SERIAL_DEV, IT8716F_CONFIG_REG_SWSUSP, tmp | 0x10); - pnp_set_logical_device(GPIO_DEV); - /* Set Serial Flash interface to 0x0820 */ - pnp_write_config(GPIO_DEV, 0x64, 0x08); - pnp_write_config(GPIO_DEV, 0x65, 0x20); - } - it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); - pnp_exit_ext_func_mode(SERIAL_DEV); -#endif - ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48); - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - setup_mb_resource_map(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } -#endif - - init_timer(); // Need to use TMICT to synconize FID/VID - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now -} diff --git a/src/mainboard/gigabyte/ma785gm/Kconfig b/src/mainboard/gigabyte/ma785gm/Kconfig deleted file mode 100644 index 67804dc..0000000 --- a/src/mainboard/gigabyte/ma785gm/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_GIGABYTE_MA785GM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8718F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default gigabyte/ma785gm - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "GA-MA785GM-US2H" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif # BOARD_GIGABYTE_MA785GM diff --git a/src/mainboard/gigabyte/ma785gm/acpi/cpstate.asl b/src/mainboard/gigabyte/ma785gm/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/gigabyte/ma785gm/acpi/ide.asl b/src/mainboard/gigabyte/ma785gm/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/gigabyte/ma785gm/acpi/routing.asl b/src/mainboard/gigabyte/ma785gm/acpi/routing.asl deleted file mode 100644 index 7b54b24..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi/routing.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTA, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0014FFFF, 0, 0, 16 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/gigabyte/ma785gm/acpi/sata.asl b/src/mainboard/gigabyte/ma785gm/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/gigabyte/ma785gm/acpi/usb.asl b/src/mainboard/gigabyte/ma785gm/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/gigabyte/ma785gm/acpi_tables.c b/src/mainboard/gigabyte/ma785gm/acpi_tables.c deleted file mode 100644 index 4c0cb77..0000000 --- a/src/mainboard/gigabyte/ma785gm/acpi_tables.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/gigabyte/ma785gm/board_info.txt b/src/mainboard/gigabyte/ma785gm/board_info.txt deleted file mode 100644 index d8160bf..0000000 --- a/src/mainboard/gigabyte/ma785gm/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.us/products/product-page.aspx?pid=3447#sp diff --git a/src/mainboard/gigabyte/ma785gm/cmos.layout b/src/mainboard/gigabyte/ma785gm/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/gigabyte/ma785gm/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ma785gm/devicetree.cb b/src/mainboard/gigabyte/ma785gm/devicetree.cb deleted file mode 100644 index c7d9932..0000000 --- a/src/mainboard/gigabyte/ma785gm/devicetree.cb +++ /dev/null @@ -1,115 +0,0 @@ -# sample config for gigabyte/ma785gm -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9601 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 off end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 off end # - device pci a.0 on end # PCIE P2P bridge 0x9609 - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "2" - - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8718f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8718f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #domain - #for node 32 to node 63 -end diff --git a/src/mainboard/gigabyte/ma785gm/dsdt.asl b/src/mainboard/gigabyte/ma785gm/dsdt.asl deleted file mode 100644 index cb9de50..0000000 --- a/src/mainboard/gigabyte/ma785gm/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "GIGA ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c b/src/mainboard/gigabyte/ma785gm/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/gigabyte/ma785gm/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/gigabyte/ma785gm/irq_tables.c b/src/mainboard/gigabyte/ma785gm/irq_tables.c deleted file mode 100644 index 87c414a..0000000 --- a/src/mainboard/gigabyte/ma785gm/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/gigabyte/ma785gm/mainboard.c b/src/mainboard/gigabyte/ma785gm/mainboard.c deleted file mode 100644 index cd06069..0000000 --- a/src/mainboard/gigabyte/ma785gm/mainboard.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Alec Ari neotheuser@ymail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -int is_dev3_present(void); - -void set_pcie_dereset() -{ - u8 byte; - u16 word; - device_t sm_dev; - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 1 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte |= ((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 1 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word |= (1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -void set_pcie_reset() -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 0 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte &= ~((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 0 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word &= ~(1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -/* - * dev3 does not exist on ma785gm - */ -int is_dev3_present(void) -{ - return 0; -} - -/* - * set gpio40 gfx - */ -static void set_gpio40_gfx(void) -{ - u8 byte; -// u16 word; - u32 dword; - device_t sm_dev; - /* disable the GPIO40 as CLKREQ2# function */ - byte = pm_ioread(0xd3); - byte &= ~(1 << 7); - pm_iowrite(0xd3, byte); - - /* disable the GPIO40 as CLKREQ3# function */ - byte = pm_ioread(0xd4); - byte &= ~(1 << 0); - pm_iowrite(0xd4, byte); - - /* enable pull up for GPIO68 */ - byte = pm2_ioread(0xf1); - byte &= ~(1 << 4); - pm2_iowrite(0xf1, byte); - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* set the gfx to 1x16 lanes */ - printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n"); - /* when the gpio40 is configured as GPIO, this will enable the output */ - pci_write_config32(sm_dev, 0xf8, 0x4); - dword = pci_read_config32(sm_dev, 0xfc); - dword &= ~(1 << 10); - - /* When the gpio40 is configured as GPIO, this will represent the output value*/ - /* 1 :enable two x8 , 0 : master slot enable only */ - dword &= ~(1 << 26); - pci_write_config32(sm_dev, 0xfc, dword); -} - -/************************************************* -* enable the dedicated function in ma785gm board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard MA785GM-US2H Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ - set_gpio40_gfx(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/gigabyte/ma785gm/mb_sysconf.h b/src/mainboard/gigabyte/ma785gm/mb_sysconf.h deleted file mode 100644 index 25d63d5..0000000 --- a/src/mainboard/gigabyte/ma785gm/mb_sysconf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/gigabyte/ma785gm/mptable.c b/src/mainboard/gigabyte/ma785gm/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/gigabyte/ma785gm/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/ma785gm/resourcemap.c b/src/mainboard/gigabyte/ma785gm/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/gigabyte/ma785gm/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/ma785gm/romstage.c b/src/mainboard/gigabyte/ma785gm/romstage.c deleted file mode 100644 index a0f9e76..0000000 --- a/src/mainboard/gigabyte/ma785gm/romstage.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8718f/it8718f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - it8718f_disable_reboot(GPIO_DEV); - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/gigabyte/ma785gmt/Kconfig b/src/mainboard/gigabyte/ma785gmt/Kconfig deleted file mode 100644 index 3dee469..0000000 --- a/src/mainboard/gigabyte/ma785gmt/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_GIGABYTE_MA785GMT - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM3 - select DIMM_DDR3 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8718F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default gigabyte/ma785gmt - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "GA-MA785GMT-UD2H" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif # BOARD_GIGABYTE_MA785GMT diff --git a/src/mainboard/gigabyte/ma785gmt/acpi/cpstate.asl b/src/mainboard/gigabyte/ma785gmt/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/gigabyte/ma785gmt/acpi/ide.asl b/src/mainboard/gigabyte/ma785gmt/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/gigabyte/ma785gmt/acpi/routing.asl b/src/mainboard/gigabyte/ma785gmt/acpi/routing.asl deleted file mode 100644 index 7b54b24..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi/routing.asl +++ /dev/null @@ -1,300 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTA, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0014FFFF, 0, 0, 16 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/gigabyte/ma785gmt/acpi/sata.asl b/src/mainboard/gigabyte/ma785gmt/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/gigabyte/ma785gmt/acpi/usb.asl b/src/mainboard/gigabyte/ma785gmt/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/gigabyte/ma785gmt/acpi_tables.c b/src/mainboard/gigabyte/ma785gmt/acpi_tables.c deleted file mode 100644 index a9e72eb..0000000 --- a/src/mainboard/gigabyte/ma785gmt/acpi_tables.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/gigabyte/ma785gmt/board_info.txt b/src/mainboard/gigabyte/ma785gmt/board_info.txt deleted file mode 100644 index fea4649..0000000 --- a/src/mainboard/gigabyte/ma785gmt/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=3156#ov diff --git a/src/mainboard/gigabyte/ma785gmt/cmos.layout b/src/mainboard/gigabyte/ma785gmt/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/gigabyte/ma785gmt/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ma785gmt/devicetree.cb b/src/mainboard/gigabyte/ma785gmt/devicetree.cb deleted file mode 100644 index bd98313..0000000 --- a/src/mainboard/gigabyte/ma785gmt/devicetree.cb +++ /dev/null @@ -1,115 +0,0 @@ -# sample config for gigabyte/ma785gmt -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM3 #L1 and DDR3 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "2" - - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8718f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8718f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end #domain - #for node 32 to node 63 -end diff --git a/src/mainboard/gigabyte/ma785gmt/dsdt.asl b/src/mainboard/gigabyte/ma785gmt/dsdt.asl deleted file mode 100644 index cb9de50..0000000 --- a/src/mainboard/gigabyte/ma785gmt/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "GIGA ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c b/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/gigabyte/ma785gmt/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/gigabyte/ma785gmt/irq_tables.c b/src/mainboard/gigabyte/ma785gmt/irq_tables.c deleted file mode 100644 index 87c414a..0000000 --- a/src/mainboard/gigabyte/ma785gmt/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/gigabyte/ma785gmt/mainboard.c b/src/mainboard/gigabyte/ma785gmt/mainboard.c deleted file mode 100644 index 89b50bb..0000000 --- a/src/mainboard/gigabyte/ma785gmt/mainboard.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ - -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - -void set_pcie_dereset(void); -void set_pcie_reset(void); -int is_dev3_present(void); - -void set_pcie_dereset() -{ - u8 byte; - u16 word; - device_t sm_dev; - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 1 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte |= ((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 1 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word |= (1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -void set_pcie_reset() -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ - /* set 0 to bit2 :disable GPM8 as AZ_RST output */ - byte = pm_ioread(0x8d); - byte &= ~((1 << 1) | (1 << 2)); - pm_iowrite(0x8d, byte); - - /* set the GPM8 and GPM9 output enable and the value to 0 */ - byte = pm_ioread(0x94); - byte &= ~((1 << 2) | (1 << 3)); - byte &= ~((1 << 0) | (1 << 1)); - pm_iowrite(0x94, byte); - - /* set the GPIO65 output enable and the value is 0 */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x7e); - word &= ~(1 << 0); - word &= ~(1 << 4); - pci_write_config16(sm_dev, 0x7e, word); -} - -/* - * justify the dev3 is exist or not - */ -int is_dev3_present(void) -{ - u16 word; - device_t sm_dev; - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* put the GPIO68 output to tristate */ - word = pci_read_config16(sm_dev, 0x7e); - word |= 1 << 6; - pci_write_config16(sm_dev, 0x7e,word); - - /* read the GPIO68 input status */ - word = pci_read_config16(sm_dev, 0x7e); - - if(word & (1 << 10)){ - /*not exist*/ - return 0; - }else{ - /*exist*/ - return 1; - } -} - -/* - * set gpio40 gfx - */ -static void set_gpio40_gfx(void) -{ - u8 byte; -// u16 word; - u32 dword; - device_t sm_dev; - /* disable the GPIO40 as CLKREQ2# function */ - byte = pm_ioread(0xd3); - byte &= ~(1 << 7); - pm_iowrite(0xd3, byte); - - /* disable the GPIO40 as CLKREQ3# function */ - byte = pm_ioread(0xd4); - byte &= ~(1 << 0); - pm_iowrite(0xd4, byte); - - /* enable pull up for GPIO68 */ - byte = pm2_ioread(0xf1); - byte &= ~(1 << 4); - pm2_iowrite(0xf1, byte); - - /* access the smbus extended register */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /*if the dev3 is present, set the gfx to 2x8 lanes*/ - /*otherwise set the gfx to 1x16 lanes*/ - if(is_dev3_present()){ - - printk(BIOS_INFO, "Dev3 is present. GFX Configuration is Two x8 slots\n"); - /* when the gpio40 is configured as GPIO, this will enable the output */ - pci_write_config32(sm_dev, 0xf8, 0x4); - dword = pci_read_config32(sm_dev, 0xfc); - dword &= ~(1 << 10); - - /* When the gpio40 is configured as GPIO, this will represent the output value*/ - /* 1 :enable two x8 , 0 : master slot enable only */ - dword |= (1 << 26); - pci_write_config32(sm_dev, 0xfc, dword); - - }else{ - printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n"); - /* when the gpio40 is configured as GPIO, this will enable the output */ - pci_write_config32(sm_dev, 0xf8, 0x4); - dword = pci_read_config32(sm_dev, 0xfc); - dword &= ~(1 << 10); - - /* When the gpio40 is configured as GPIO, this will represent the output value*/ - /* 1 :enable two x8 , 0 : master slot enable only */ - dword &= ~(1 << 26); - pci_write_config32(sm_dev, 0xfc, dword); - } -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb700 settings for thermal config */ - /* set SB700 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in ma785gmt board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard MA785GMT-UD2H Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ - set_thermal_config(); - set_gpio40_gfx(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/gigabyte/ma785gmt/mptable.c b/src/mainboard/gigabyte/ma785gmt/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/gigabyte/ma785gmt/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/ma785gmt/resourcemap.c b/src/mainboard/gigabyte/ma785gmt/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/gigabyte/ma785gmt/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/ma785gmt/romstage.c b/src/mainboard/gigabyte/ma785gmt/romstage.c deleted file mode 100644 index a0f9e76..0000000 --- a/src/mainboard/gigabyte/ma785gmt/romstage.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8718f/it8718f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - it8718f_disable_reboot(GPIO_DEV); - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/gigabyte/ma78gm/Kconfig b/src/mainboard/gigabyte/ma78gm/Kconfig deleted file mode 100644 index f42008a..0000000 --- a/src/mainboard/gigabyte/ma78gm/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_GIGABYTE_MA78GM - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2R2 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_ITE_IT8718F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default gigabyte/ma78gm - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "GA-MA78GM-US2H" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_01000095.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif # BOARD_GIGABYTE_MA78GM diff --git a/src/mainboard/gigabyte/ma78gm/acpi/cpstate.asl b/src/mainboard/gigabyte/ma78gm/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/gigabyte/ma78gm/acpi/ide.asl b/src/mainboard/gigabyte/ma78gm/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/gigabyte/ma78gm/acpi/routing.asl b/src/mainboard/gigabyte/ma78gm/acpi/routing.asl deleted file mode 100644 index bbcc61d..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi/routing.asl +++ /dev/null @@ -1,311 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0012FFFF, 2, INTC, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTD, 0 }, - Package(){0x0013FFFF, 2, INTA, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0012FFFF, 2, 0, 18 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0013FFFF, 2, 0, 16 }, - - /* Package(){0x00140000, 0, 0, 16 }, */ - - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/gigabyte/ma78gm/acpi/sata.asl b/src/mainboard/gigabyte/ma78gm/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/gigabyte/ma78gm/acpi/usb.asl b/src/mainboard/gigabyte/ma78gm/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/gigabyte/ma78gm/acpi_tables.c b/src/mainboard/gigabyte/ma78gm/acpi_tables.c deleted file mode 100644 index a9e72eb..0000000 --- a/src/mainboard/gigabyte/ma78gm/acpi_tables.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/gigabyte/ma78gm/board_info.txt b/src/mainboard/gigabyte/ma78gm/board_info.txt deleted file mode 100644 index b4643c0..0000000 --- a/src/mainboard/gigabyte/ma78gm/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://www.gigabyte.com/products/product-page.aspx?pid=2995#ov diff --git a/src/mainboard/gigabyte/ma78gm/cmos.layout b/src/mainboard/gigabyte/ma78gm/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/gigabyte/ma78gm/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/gigabyte/ma78gm/devicetree.cb b/src/mainboard/gigabyte/ma78gm/devicetree.cb deleted file mode 100644 index 8d81fbe..0000000 --- a/src/mainboard/gigabyte/ma78gm/devicetree.cb +++ /dev/null @@ -1,115 +0,0 @@ -# sample config for gigabyte/ma78gm -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2r2 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 off end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "1" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/ite/it8718f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8718f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end -# device pci 00.5 on end - end - end #domain - #for node 32 to node 63 -end diff --git a/src/mainboard/gigabyte/ma78gm/dsdt.asl b/src/mainboard/gigabyte/ma78gm/dsdt.asl deleted file mode 100644 index cb9de50..0000000 --- a/src/mainboard/gigabyte/ma78gm/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "GIGA ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c b/src/mainboard/gigabyte/ma78gm/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/gigabyte/ma78gm/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/gigabyte/ma78gm/irq_tables.c b/src/mainboard/gigabyte/ma78gm/irq_tables.c deleted file mode 100644 index 87c414a..0000000 --- a/src/mainboard/gigabyte/ma78gm/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/gigabyte/ma78gm/mainboard.c b/src/mainboard/gigabyte/ma78gm/mainboard.c deleted file mode 100644 index 49df0c2..0000000 --- a/src/mainboard/gigabyte/ma78gm/mainboard.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); -/* - * ma78gm-us2h uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to - * pull it up before training the slot. - ***/ -void set_pcie_dereset() -{ - u16 word; - device_t sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - -void set_pcie_reset() -{ - u16 word; - device_t sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - - -u8 is_dev3_present(void) -{ - return 0; -} - -/************************************************* -* enable the dedicated function in board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard MA78GM-US2H Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/gigabyte/ma78gm/mptable.c b/src/mainboard/gigabyte/ma78gm/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/gigabyte/ma78gm/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/gigabyte/ma78gm/resourcemap.c b/src/mainboard/gigabyte/ma78gm/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/gigabyte/ma78gm/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/gigabyte/ma78gm/romstage.c b/src/mainboard/gigabyte/ma78gm/romstage.c deleted file mode 100644 index b9d27f7..0000000 --- a/src/mainboard/gigabyte/ma78gm/romstage.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8718f/it8718f.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - it8718f_disable_reboot(GPIO_DEV); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/hp/Kconfig b/src/mainboard/hp/Kconfig index 4b391ad..eac572f 100644 --- a/src/mainboard/hp/Kconfig +++ b/src/mainboard/hp/Kconfig @@ -3,11 +3,11 @@ if VENDOR_HP choice prompt "Mainboard model"
-config BOARD_HP_DL145_G1 +config BOARD_HP_PROLIANT_DL145_G1 bool "ProLiant DL145 G1" -config BOARD_HP_DL145_G3 +config BOARD_HP_PROLIANT_DL145_G3 bool "ProLiant DL145 G3" -config BOARD_HP_DL165_G6_FAM10 +config BOARD_HP_PROLIANT_DL165_G6_FAM10 bool "ProLiant DL165 G6 Fam10" config BOARD_HP_E_VECTRA_P2706T bool "e-Vectra P2706T" @@ -17,9 +17,9 @@ config BOARD_HP_PAVILION_M6_1035DX
endchoice
-source "src/mainboard/hp/dl145_g1/Kconfig" -source "src/mainboard/hp/dl145_g3/Kconfig" -source "src/mainboard/hp/dl165_g6_fam10/Kconfig" +source "src/mainboard/hp/proliant_dl145_g1/Kconfig" +source "src/mainboard/hp/proliant_dl145_g3/Kconfig" +source "src/mainboard/hp/proliant_dl165_g6_fam10/Kconfig" source "src/mainboard/hp/e_vectra_p2706t/Kconfig" source "src/mainboard/hp/pavilion_m6_1035dx/Kconfig"
diff --git a/src/mainboard/hp/dl145_g1/Kconfig b/src/mainboard/hp/dl145_g1/Kconfig deleted file mode 100644 index 0c6d642..0000000 --- a/src/mainboard/hp/dl145_g1/Kconfig +++ /dev/null @@ -1,59 +0,0 @@ -if BOARD_HP_DL145_G1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8131 - select SOUTHBRIDGE_AMD_AMD8111 - select SUPERIO_WINBOND_W83627HF - select HAVE_HARD_RESET - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select SET_FIDVID - select SET_FIDVID_DEBUG - select RAMINIT_SYSINFO -# select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_I2CMUX - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default hp/dl145_g1 - -config APIC_ID_OFFSET - hex - default 0x0 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "ProLiant DL145 G1" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 9 - -endif # BOARD_HP_DL145_G1 diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111.asl deleted file mode 100644 index aa136ff..0000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111.asl +++ /dev/null @@ -1,617 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011, 2014 Oskar Enoksson enok@lysator.liu.se - */ -//AMD8111 -// APIC version of the interrupt routing table -Name (APIC, Package (0x04) { - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} -}) -// PIC version of the interrupt routing table -Name (PICM, Package (0x04) { - Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00}, - Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00}, - Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00}, - Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00} -}) -Name (DNCG, Ones) -Method (_PRT, 0, NotSerialized) { - If (LEqual (^DNCG, Ones)) { - Store (DADD(_SB.PCI0.SBDN, 0x0001ffff), Local0) - // Update the Device Number according to SBDN - Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) - - Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) - Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) - - Store (0x00, ^DNCG) - } - - If (LNot (PICF)) { - Return (PICM) - } Else { - Return (APIC) - } -} - -// AMD8111 System Management I/O Mapped Registers (PMxx) -OperationRegion (PMIO, SystemIO, PMBS, 0xDF) -Field (PMIO, ByteAcc, NoLock, Preserve) { - Offset (0x1E), - SWSM, 8, // Software SMI Trigger (sets GSTS) - Offset (0x28), - GSTS, 16, // Global STatuS - GNBL, 16, // Global SMI enable - Offset (0x30), - STMC, 5, // Miscellaneous SMI Status - Offset (0x32), - ENMC, 5, // Miscellaneous SMI Enable - Offset (0x44), - STC0, 9, // TCO Status 1 - Offset (0x46), - STC1, 4, // TCO Status 2 - Offset (0xA8), - STHW, 20 // Device monitor SMI Interrupt Enable -} -Device (HPET) { - Name (HPT, 0x00) - Name (_HID, EisaId ("PNP0103")) - Name (_UID, 0x00) - Method (_STA, 0, NotSerialized) { - Return (0x0F) - } - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) - }) - Return (BUF0) - } -} -#include "amd8111_pic.asl" -#include "amd8111_isa.asl" - -Device (TP2P) { - // 8111 P2P and it should 0x00030000 when 8131 present - Method (_ADR, 0, NotSerialized) { - Return (DADD(_SB.PCI0.SBDN, 0x00000000)) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - // result : - // [0] Bit index into GPEx_EN in the GPE block described by FADT. - // [1] The lowest power state from which the system can be awakened. - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x08, 0x03 }) - //} Else { - Return (Package (0x02) { 0x08, 0x01 }) - //} - } - Device (ETHR) { - Name (_ADR, 0x00010000) - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x08, 0x03 }) - //} Else { - Return (Package (0x02) { 0x08, 0x01 }) - //} - } - } - Device (USB0) { - Name (_ADR, 0x00000000) - Method (_PSW, 1, NotSerialized) { // Power State Wake - And (GNBL, 0x7FFF, GNBL) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x0F, 0x03 }) - //} Else { - Return (Package (0x02) { 0x0F, 0x01 }) - //} - } - } - Device (USB1) { - Name (_ADR, 0x00000001) - Method (_PSW, 1, NotSerialized) { // Power State Wake - And (GNBL, 0x7FFF, GNBL) - } - Method (_PRW, 0, NotSerialized) { // Power Resource for Wake - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x0F, 0x03 }) - //} Else { - Return (Package (0x02) { 0x0F, 0x01 }) - //} - } - } - Name (APIC, Package (0x0C) { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } - }) - Name (PICM, Package (0x0C) { - Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //USB - Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //Slot 6 - Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, //Slot 5 - Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} -Device (IDE0) { - Method (_ADR, 0, NotSerialized) { - Return (DADD(_SB.PCI0.SBDN, 0x00010001)) - } - Name (REGF, 0x01) - Method (_REG, 2, NotSerialized) { - If (LEqual (Arg0, 0x02)) { - Store (Arg1, REGF) - } - } - OperationRegion (BAR0, PCI_Config, 0x00, 0x60) - Field (BAR0, ByteAcc, NoLock, Preserve) { - Offset (0x40), // EIDE Controller Configuration Register - SCEN, 1, // Secondary Channel Enable - PCEN, 1, // Primary Channel Enable - , 10, - SPWB, 1, // Secondary Port posted-write buffer for PIO modes enable - SRPB, 1, // RW (controls nothing) - PPWB, 1, // Primary Port posted-write buffer for PIO modes enable - PRPB, 1, // RW (controls nothing) - PM80, 1, // High-speed 80-pin cable enable Primary Master - PS80, 1, // High-speed 80-pin cable enable Primary Slave - SM80, 1, // High-speed 80-pin cable enable Secondary Master - SS80, 1, // High-speed 80-pin cable enable Secondary Slave - , 4, // RW (controls nothing) - Offset (0x48), - SSRT, 4, // - SSPW, 4, // - SMRT, 4, // - SMPW, 4, - PSRT, 4, - PSPW, 4, - PMRT, 4, - PMPW, 4, - SSAD, 2, - SMAD, 2, - PSAD, 2, - PMAD, 2, - Offset (0x4E), - SXRT, 4, - SXPW, 4, - PXRT, 4, - PXPW, 4, - SSUD, 8, - SMUD, 8, - PSUD, 8, - PMUD, 8, - PPDN, 1, - PPDS, 1, - , 2, - SPDN, 1, - SPDS, 1 - } - Name (TIM0, Package (0x06) { - Package (0x05) { - 0x78, - 0xB4, - 0xF0, - 0x0186, - 0x0258 - }, - Package (0x07) { - 0x78, - 0x5A, - 0x3C, - 0x2D, - 0x1E, - 0x14, - 0x0F - }, - Package (0x08) { - 0x04, - 0x03, - 0x02, - 0x01, - 0x00, - 0x00, - 0x00, - 0x00 - }, - Package (0x03) { - 0x02, - 0x01, - 0x00 - }, - Package (0x05) { - 0x20, - 0x22, - 0x42, - 0x65, - 0xA8 - }, - Package (0x07) { - 0xC2, - 0xC1, - 0xC0, - 0xC4, - 0xC5, - 0xC6, - 0xC7 - } - }) - Name (TMD0, Buffer (0x14) {}) - CreateDWordField (TMD0, 0x00, PIO0) - CreateDWordField (TMD0, 0x04, DMA0) - CreateDWordField (TMD0, 0x08, PIO1) - CreateDWordField (TMD0, 0x0C, DMA1) - CreateDWordField (TMD0, 0x10, CHNF) - Device (CHN0) { - Name (_ADR, 0x00) - Method (_STA, 0, NotSerialized) { - If (PCEN) { Return (0x0F) } - Else { Return (0x09) } - } - Method (_GTM, 0, NotSerialized) { - Return (GTM (PMPW, PMRT, PSPW, PSRT, PMUD, PSUD)) - } - Method (_STM, 3, NotSerialized) { - Store (Arg0, TMD0) - Store (STM (), Local0) - And (Local0, 0xFF, PSUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0xFF, PMUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0x0F, PSRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PSPW) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PMRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, PMPW) - Store (GTF (0x00, Arg1), ATA0) - Store (GTF (0x01, Arg2), ATA1) - } - Device (DRV0) { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA0)) - } - } - Device (DRV1) { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA1)) - } - } - } - Device (CHN1) { - Name (_ADR, 0x01) - Method (_STA, 0, NotSerialized) { - If (SCEN) { Return (0x0F) } - Else { Return (0x09) } - } - Method (_GTM, 0, NotSerialized) { - Return (GTM (SMPW, SMRT, SSPW, SSRT, SMUD, SSUD)) - } - Method (_STM, 3, NotSerialized) { - Store (Arg0, TMD0) - Store (STM (), Local0) - And (Local0, 0xFF, SSUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0xFF, SMUD) - ShiftRight (Local0, 0x08, Local0) - And (Local0, 0x0F, SSRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SSPW) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SMRT) - ShiftRight (Local0, 0x04, Local0) - And (Local0, 0x0F, SMPW) - Store (GTF (0x00, Arg1), ATA2) - Store (GTF (0x01, Arg2), ATA3) - } - Device (DRV0) { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA2)) - } - } - Device (DRV1) { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) { - Return (RATA (ATA3)) - } - } - } - Method (GTM, 6, Serialized) { - Store (Ones, PIO0) - Store (Ones, PIO1) - Store (Ones, DMA0) - Store (Ones, DMA1) - Store (0x1A, CHNF) - If (REGF) {} - Else { Return (TMD0) } - Add (Arg0, Arg1, Local0) - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, PIO0) - Add (Arg2, Arg3, Local0) - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, PIO1) - If (And (Arg4, 0x40)) { - Or (CHNF, 0x01, CHNF) - And (Arg4, 0x07, Local0) - If (LLess (Local0, 0x04)) { - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, DMA0) - } Else { - If (LEqual (Local0, 0x04)) { - Store (0x2D, DMA0) - } Else { - If (LEqual (Local0, 0x05)) { - Store (0x1E, DMA0) - } Else { - If (LEqual (Local0, 0x06)) { - Store (0x14, DMA0) - } Else { - If (LEqual (Local0, 0x07)) { - Store (0x0F, DMA0) - } Else { - Store (PIO0, DMA0) - } - } - } - } - } - } Else { - Store (PIO0, DMA0) - } - If (And (Arg5, 0x40)) { - Or (CHNF, 0x04, CHNF) - And (Arg5, 0x07, Local0) - If (LLess (Local0, 0x04)) { - Add (Local0, 0x02, Local0) - Multiply (Local0, 0x1E, DMA1) - } Else { - If (LEqual (Local0, 0x04)) { - Store (0x2D, DMA1) - } Else { - If (LEqual (Local0, 0x05)) { - Store (0x1E, DMA1) - } Else { - If (LEqual (Local0, 0x06)) { - Store (0x14, DMA1) - } Else { - If (LEqual (Local0, 0x07)) { - Store (0x0F, DMA0) - } Else { - Store (PIO1, DMA1) - } - } - } - } - } - } Else { - Store (PIO1, DMA1) - } - Return (TMD0) - } - Method (STM, 0, Serialized) { - If (REGF) {} - Else { Return (0xFFFFFFFF) } - If (LEqual (PIO0, 0xFFFFFFFF)) { - Store (0xA8, Local1) - } Else { - And (Match (DerefOf (Index (TIM0, 0x00)), - MGE, PIO0, MTR, - 0x00, 0x00), - 0x07, Local0) - Store (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), - Local1) - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (PIO1, 0xFFFFFFFF)) { - Or (Local1, 0xA8, Local1) - } Else { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIO1, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), - Local1, Local1) - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (DMA0, 0xFFFFFFFF)) { - Or (Local1, 0x03, Local1) - } Else { - If (And (CHNF, 0x01)) { - And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA0, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), - Local1, Local1) - } Else { - Or (Local1, 0x03, Local1) - } - } - ShiftLeft (Local1, 0x08, Local1) - If (LEqual (DMA1, 0xFFFFFFFF)) { - Or (Local1, 0x03, Local1) - } Else { - If (And (CHNF, 0x04)) { - And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA1, MTR, - 0x00, 0x00), 0x07, Local0) - Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), - Local1, Local1) - } Else { - Or (Local1, 0x03, Local1) - } - } - Return (Local1) - } - Name (AT01, Buffer (0x07) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xEF - }) - Name (AT02, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90 - }) - Name (AT03, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6 - }) - Name (AT04, Buffer (0x07) { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91 - }) - Name (ATA0, Buffer (0x1D) {}) - Name (ATA1, Buffer (0x1D) {}) - Name (ATA2, Buffer (0x1D) {}) - Name (ATA3, Buffer (0x1D) {}) - Name (ATAB, Buffer (0x1D) {}) - CreateByteField (ATAB, 0x00, CMDC) - Method (GTFB, 3, Serialized) { - Multiply (CMDC, 0x38, Local0) - Add (Local0, 0x08, Local1) - CreateField (ATAB, Local1, 0x38, CMDX) - Multiply (CMDC, 0x07, Local0) - CreateByteField (ATAB, Add (Local0, 0x02), A001) - CreateByteField (ATAB, Add (Local0, 0x06), A005) - Store (Arg0, CMDX) - Store (Arg1, A001) - Store (Arg2, A005) - Increment (CMDC) - } - Method (GTF, 2, Serialized) { - Store (Arg1, Debug) - Store (0x00, CMDC) - Name (ID49, 0x0C00) - Name (ID59, 0x00) - Name (ID53, 0x04) - Name (ID63, 0x0F00) - Name (ID88, 0x0F00) - Name (IRDY, 0x01) - Name (PIOT, 0x00) - Name (DMAT, 0x00) - If (LEqual (SizeOf (Arg1), 0x0200)) { - CreateWordField (Arg1, 0x62, IW49) - Store (IW49, ID49) - CreateWordField (Arg1, 0x6A, IW53) - Store (IW53, ID53) - CreateWordField (Arg1, 0x7E, IW63) - Store (IW63, ID63) - CreateWordField (Arg1, 0x76, IW59) - Store (IW59, ID59) - CreateWordField (Arg1, 0xB0, IW88) - Store (IW88, ID88) - } - Store (0xA0, Local7) - If (Arg0) { - Store (0xB0, Local7) - And (CHNF, 0x08, IRDY) - If (And (CHNF, 0x10)) { - Store (PIO1, PIOT) - } Else { - Store (PIO0, PIOT) - } - If (And (CHNF, 0x04)) { - If (And (CHNF, 0x10)) { - Store (DMA1, DMAT) - } Else { - Store (DMA0, DMAT) - } - } Else { - Store (PIO1, DMAT) - } - } Else { - And (CHNF, 0x02, IRDY) - Store (PIO0, PIOT) - If (And (CHNF, 0x01)) { - Store (DMA0, DMAT) - } - } - If (LAnd (LAnd (And (ID53, 0x04), And (ID88, 0xFF00)), DMAT)) { - Store (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMAT, MTR, - 0x00, 0x00), Local1) - If (LGreater (Local1, 0x06)) { - Store (0x06, Local1) - } - GTFB (AT01, Or (0x40, Local1), Local7) - } Else { - If (LAnd (And (ID63, 0xFF00), PIOT)) { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, - 0x00, 0x00), 0x07, Local0) - If (Local0) { - If (And (Local0, 0x04)) { - Store (0x02, Local0) - } Else { - Store (0x01, Local0) - } - } - Or (0x20, DerefOf (Index (DerefOf (Index (TIM0, 0x03)), Local0 - )), Local1) - GTFB (AT01, Local1, Local7) - } - } - If (IRDY) { - And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, - 0x00, 0x00), 0x07, Local0) - Or (0x08, DerefOf (Index (DerefOf (Index (TIM0, 0x02)), Local0 - )), Local1) - GTFB (AT01, Local1, Local7) - } Else { - If (And (ID49, 0x0400)) { - GTFB (AT01, 0x01, Local7) - } - } - If (LAnd (And (ID59, 0x0100), And (ID59, 0xFF))) { - GTFB (AT03, And (ID59, 0xFF), Local7) - } - Store (ATAB, Debug) - Return (ATAB) - } - Method (RATA, 1, NotSerialized) { - CreateByteField (Arg0, 0x00, CMDN) - Multiply (CMDN, 0x38, Local0) - CreateField (Arg0, 0x08, Local0, RETB) - Store (RETB, Debug) - Return (RETB) - } -} -Device (PMF) { - // acpi smbus it should be 0x00040003 if 8131 present - Method (_ADR, 0, NotSerialized) - { - Return (DADD(_SB.PCI0.SBDN, 0x00010003)) - } - OperationRegion (BAR0, PCI_Config, 0x00, 0xff) - Field (BAR0, ByteAcc, NoLock, Preserve) { - Offset (0x56), - PIRA, 4, - PIRB, 4, - PIRC, 4, - PIRD, 4 - } - //OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) - //Field (TS3_, DWordAcc, NoLock, Preserve) { - // PTS3, 16 - //} -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl deleted file mode 100644 index be2a1ff..0000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111_isa.asl +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - */ -//AMD8111 isa - -Device (ISA) { - // lpc 0x00040000 - Method (_ADR, 0, NotSerialized) { - Return (DADD(_SB.PCI0.SBDN, 0x00010000)) - } - /* - OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers - Field (PIRY, ByteAcc, NoLock, Preserve) { - Z000, 2, // Parallel Port Range - , 1, - ECP , 1, // ECP Enable - FDC1, 1, // Floppy Drive Controller 1 - FDC2, 1, // Floppy Drive Controller 2 - Offset (0x01), - Z001, 3, // Serial Port A Range - SAEN, 1, // Serial Post A Enabled - Z002, 3, // Serial Port B Range - SBEN, 1 // Serial Post B Enabled - } - */ - Device (PIC) { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) // Master Interrupt controller - IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) // Slave Interrupt controller - IRQ (Edge, ActiveHigh, Exclusive) {2} - }) - } - Device (DMA1) { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) // Slave DMA controller - IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) // DMA page registers - IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) // Master DMA controller - DMA (Compatibility, NotBusMaster, Transfer16) {4} - }) - } - Device (TMR) { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) // Programmable Interval timer - IRQ (Edge, ActiveHigh, Exclusive) {0} - }) - } - Device (RTC) { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0070, 0x0070, 0x01, 0x04) // Realtime Clock and CMOS ram - IRQ (Edge, ActiveHigh, Exclusive) {8} - }) - } - Device (SPKR) { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) // PC speaker - }) - } - Device (COPR) { // Co-processor - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) // Floating point Error control - IRQ (Edge, ActiveHigh, Exclusive) {13} - }) - } - Device (SYSR) { // System control registers (?) - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x00) - Name (CRS, ResourceTemplate () { - IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) - IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) - IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) - IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) - IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) - IO (Decode16, 0x0074, 0x0074, 0x01, 0x0C) - IO (Decode16, 0x0080, 0x0080, 0x01, 0x01) - IO (Decode16, 0x0084, 0x0084, 0x01, 0x03) - IO (Decode16, 0x0088, 0x0088, 0x01, 0x01) - IO (Decode16, 0x008C, 0x008C, 0x01, 0x03) - IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) - IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) - IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) - // IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - // EISA defined level triggered interrupt control registers - IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) - // IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error - // IO (Decode16, 0xDE00, 0xDE00, 0x00, 0x80) - // IO (Decode16, 0xDE80, 0xDE80, 0x00, 0x80) - IO (Decode16,0xDE00,0xDE00,0x00,0x80) - IO (Decode16,0xDE80,0xDE80,0x00,0x80) - // IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM - // IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0D) // PMBS block - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0E) // SMBS block - IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0F) // GPBS block - }) - Method (_CRS, 0, NotSerialized) { - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0D._MIN, GP00) - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0D._MAX, GP01) - CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0D._LEN, GP0L) - Store (PMBS, GP00) - Store (PMBS, GP01) - Store (PMLN, GP0L) - If (SMBS) { - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0E._MIN, GP10) - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0E._MAX, GP11) - CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0E._LEN, GP1L) - Store (SMBS, GP10) - Store (SMBS, GP11) - Store (SMBL, GP1L) - } - If (GPBS) { - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0F._MIN, GP20) - CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0F._MAX, GP21) - CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0F._LEN, GP2L) - Store (GPBS, GP20) - Store (GPBS, GP21) - Store (GPLN, GP2L) - } - Return (CRS) - } - } - Device (MEM) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF - Memory32Fixed (ReadWrite, 0x000C0000, 0x00010000) // video BIOS c0000-c8404 - Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC - Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM - Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC - Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS - }) -// Read the Video Memory length - CreateDWordField (BUF0, 0x14, CLEN) - CreateDWordField (BUF0, 0x10, CBAS) - - ShiftLeft (VGA1, 0x09, Local0) - Store (Local0, CLEN) - - Return (BUF0) - } - } -#include "superio/winbond/w83627hf/acpi/superio.asl" -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl b/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl deleted file mode 100644 index a09c576..0000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8111_pic.asl +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - */ -//AMD8111 pic LNKA B C D - -Device (LNKA) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - Method (_STA, 0, NotSerialized) { - If (LEqual (_SB.PCI0.PMF.PIRA, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - Method (_PRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - Method (_DIS, 0, NotSerialized) { - Store (0x00, _SB.PCI0.PMF.PIRA ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (_SB.PCI0.PMF.PIRA, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,_SB.PCI0.PMF.PIRA) - } -} - -Device (LNKB) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) { - If (LEqual (_SB.PCI0.PMF.PIRB, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - - Method (_DIS, 0, NotSerialized) { - Store (0x00, _SB.PCI0.PMF.PIRB ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRA1) - CreateByteField (BUFB, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (_SB.PCI0.PMF.PIRB, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFB) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,_SB.PCI0.PMF.PIRB) - } -} - -Device (LNKC) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) { - If (LEqual (_SB.PCI0.PMF.PIRC, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - - Method (_PRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFA) - } - - Method (_DIS, 0, NotSerialized) { - Store (0x00, _SB.PCI0.PMF.PIRC ) - } - - Method (_CRS, 0, Serialized) { - Name (BUFA, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFA, 0x01, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (_SB.PCI0.PMF.PIRC, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFA) - } - - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,_SB.PCI0.PMF.PIRC) - } -} - -Device (LNKD) { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) { - If (LEqual (_SB.PCI0.PMF.PIRD, 0x00) ) { Return (0x09) } //Disabled - Else { Return (0x0B) } //Enabled - } - Method (_PRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {3,5,10,11} - }) - Return (BUFB) - } - Method (_DIS, 0, NotSerialized) { - Store (0x00, _SB.PCI0.PMF.PIRD ) - } - Method (_CRS, 0, Serialized) { - Name (BUFB, ResourceTemplate () { - IRQ (Level, ActiveLow, Shared) {} - }) - CreateByteField (BUFB, 0x01, IRA1) - CreateByteField (BUFB, 0x02, IRA2) - Store (0x00, Local2) - Store (0x00, Local3) - Store (_SB.PCI0.PMF.PIRD, Local1) - If (LNot (LEqual (Local1, 0x00))) { // Routing enable - If (LGreater (Local1, 0x07)) { - Subtract (Local1, 0x08, Local1) - ShiftLeft (One, Local1, Local3) - } Else { - If (LGreater (Local1, 0x00)) { - ShiftLeft (One, Local1, Local2) - } - } - Store (Local2, IRA1) - Store (Local3, IRA2) - } - Return (BUFB) - } - Method (_SRS, 1, NotSerialized) { - CreateByteField (Arg0, 0x01, IRA1) - CreateByteField (Arg0, 0x02, IRA2) - ShiftLeft (IRA2, 0x08, Local0) - Or (Local0, IRA1, Local0) - Store (0x00, Local1) - ShiftRight (Local0, 0x01, Local0) - While (LGreater (Local0, 0x00)) { - Increment (Local1) - ShiftRight (Local0, 0x01, Local0) - } - Store(Local1,_SB.PCI0.PMF.PIRD) - } -} diff --git a/src/mainboard/hp/dl145_g1/acpi/amd8131.asl b/src/mainboard/hp/dl145_g1/acpi/amd8131.asl deleted file mode 100644 index 54aae73..0000000 --- a/src/mainboard/hp/dl145_g1/acpi/amd8131.asl +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright 2005 AMD - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - */ - -Device (PG0A) { -/* 8131 pcix bridge 1 */ - Method (_ADR, 0, NotSerialized) { - Return (DADD(GHCD(HCIN, 0), 0x00000000)) - } - Method (_PRW, 0, NotSerialized) { - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x29, 0x03 }) - //} Else { - Return (Package (0x02) { 0x29, 0x01 }) - //} - } - Name (APIC, Package (0x0c) { - // Slot 3 - PIRQ BCDA ---- verified - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, - Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, - Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, - // Slot 4 - PIRQ CDAB ---- verified - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1A }, //? - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, - Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x18 }, - Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x19 }, - // Onboard NIC 1 - PIRQ DABC - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1B }, //? - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x18 }, - Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x19 }, - Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1A }, - // NIC 2 - PIRQ ABCD -- verified - // Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x18 }, //? - // Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x19 }, - // Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1A }, - // Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1B }, - // SERIAL ATA - PIRQ BCDA - // Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x19 }, //? - // Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x1A }, - // Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x1B }, - // Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x18 } - }) - Name (PICM, Package (0x0c) { - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 3 - Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, - // Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} -Device (PG0B) { -/* 8131 pcix bridge 2 */ - Method (_ADR, 0, NotSerialized) { - Return (DADD(GHCD(HCIN, 0), 0x00010000)) - } - Method (_PRW, 0, NotSerialized) { - //If (CondRefOf (_S3, Local0)) { - // Return (Package (0x02) { 0x22, 0x03 }) - //} Else { - Return (Package (0x02) { 0x22, 0x01 }) - //} - } - Name (APIC, Package (0x04) { - // Slot A - PIRQ CDAB -- verfied - Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F },// Slot 2 - Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1C }, - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1D }, - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1E } - }) - Name (PICM, Package (0x04) { - Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 },//Slot 2 - Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 } - }) - Method (_PRT, 0, NotSerialized) { - If (LNot (PICF)) { Return (PICM) } - Else { Return (APIC) } - } -} diff --git a/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl b/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl deleted file mode 100644 index 021ee1f..0000000 --- a/src/mainboard/hp/dl145_g1/acpi/pci0_hc.asl +++ /dev/null @@ -1,6 +0,0 @@ -/* - * Copyright (c) 2011, 2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include "amd8111.asl" //real SB at first -#include "amd8131.asl" diff --git a/src/mainboard/hp/dl145_g1/acpi_tables.c b/src/mainboard/hp/dl145_g1/acpi_tables.c deleted file mode 100644 index b051518..0000000 --- a/src/mainboard/hp/dl145_g1/acpi_tables.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Island Aruma ACPI support - * written by Stefan Reinauer stepan@openbios.org - * (C) 2005 Stefan Reinauer - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - * - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Modified to work with hp/dl145_g1 - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include "mb_sysconf.h" -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base=0x18; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write 8111 IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, - IO_APIC_ADDR, 0); - - /* Write all 8131 IOAPICs */ - { - device_t dev; - struct resource *res; - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_1, - res->base, gsi_base ); - gsi_base+=4; - - } - } - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_2, - res->base, gsi_base ); - gsi_base+=4; - } - } - - /* - int i; - int j = 0; - - for(i=1; i< sysconf.hc_possible_num; i++) { - unsigned d = 0; - if(!(sysconf.pci1234[i] & 0x1) ) continue; - // 8131 need to use +4 - - switch (sysconf.hcid[i]) { - case 1: - d = 7; - break; - case 3: - d = 4; - break; - } - switch (sysconf.hcid[i]) { - case 1: - case 3: - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], - res->base, gsi_base ); - gsi_base+=d; - } - } - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], - res->base, gsi_base ); - gsi_base+=d; - - } - } - break; - } - - j++; - } - */ - - } - - current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) - current, 0, 0, 2, 5 ); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high*/ - - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, 5, 1); - /* 1: LINT1 connect to NMI */ - - - return current; -} - diff --git a/src/mainboard/hp/dl145_g1/board_info.txt b/src/mainboard/hp/dl145_g1/board_info.txt deleted file mode 100644 index 2118837..0000000 --- a/src/mainboard/hp/dl145_g1/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: server -Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc... -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/hp/dl145_g1/cmos.layout b/src/mainboard/hp/dl145_g1/cmos.layout deleted file mode 100644 index d8e2eee..0000000 --- a/src/mainboard/hp/dl145_g1/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/hp/dl145_g1/devicetree.cb b/src/mainboard/hp/dl145_g1/devicetree.cb deleted file mode 100644 index c955ac3..0000000 --- a/src/mainboard/hp/dl145_g1/devicetree.cb +++ /dev/null @@ -1,142 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x7460 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end # link 0 - device pci 18.0 on end # link 1 - device pci 18.0 on # link 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on # PCIX Bridge A - # PCI-X expansion slot cards auto-detected here - end - device pci 0.1 on end # IOAPIC A - device pci 1.0 on # PCIX Bridge B - # On-board BCM5704 dual port ethernet chip auto-detected here - # Optional SCSI board also (?) - end - device pci 1.1 on end # IOAPIC B - device pci 2.0 off end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent of the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end # OHCI-based USB controller 0 - device pci 0.1 on end # OCHI-based USB controller 1 - device pci 0.2 on end # EHCI-based USB2 controller - device pci 1.0 off end # LAN Ethernet controller - #device pci 4.0 on end # VGA PCI-card (auto detected) - end - device pci 1.0 on # LPC Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - #io 0x60 = 0x3f0 - #irq 0x70 = 6 - #drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - #io 0x60 = 0x378 - #irq 0x70 = 7 - #drq 0x74 = 1 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - #io 0x60 = 0x2f8 - #irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - end - device pnp 2e.7 off # GAM_MIDI_GPIO1 - #io 0x60 = 0x201 - #io 0x62 = 0x330 - #irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 (watchdog timer) - end - device pnp 2e.9 on # GPIO3 - end - device pnp 2e.a on # ACPI - end - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end # EIDE controller - device pci 1.2 on - chip drivers/generic/generic - device i2c 8 on end # Some HW-monitor/sensor? - end - end - device pci 1.2 on - chip drivers/i2c/i2cmux # Multplexed DIMM spd eeproms. - device i2c 18 on #0 pca9516 (?) - # Some dimms also listen to address 30-33 - # It's some kind of write-protect function - # The 50-53 addresses are the interesting ones. - chip drivers/generic/generic #dimm H0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm H0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm H0-2 - device i2c 52 on end - end - chip drivers/generic/generic #dimm H0-3 - device i2c 53 on end - end - end - device i2c 18 on #1 pca9516 (?) - chip drivers/generic/generic #dimm H1-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm H1-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm H1-2 - device i2c 52 on end - end - chip drivers/generic/generic #dimm H1-3 - device i2c 53 on end - end - end - end - end - device pci 1.2 on - chip drivers/generic/generic - device i2c 69 on end # Texas Instruments cdc960 clock synthesizer - end - end # SMBus 2.0 controller - device pci 1.3 on # System management registers (ACPI) - end # System management - #device pci 1.4 off end - device pci 1.5 off end # AC97 Audio - device pci 1.6 off end # AC97 Modem - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end - diff --git a/src/mainboard/hp/dl145_g1/dsdt.asl b/src/mainboard/hp/dl145_g1/dsdt.asl deleted file mode 100644 index 05fa6de..0000000 --- a/src/mainboard/hp/dl145_g1/dsdt.asl +++ /dev/null @@ -1,314 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) -{ - // Name (SPIO, 0x2E) // SuperIO (w83627hf) - Name (SPI2, 0x4E) // Unknown National Semiconductors (EPM3128A?) - Name (IO1B, 0x0680) // GPIO Base (?) - Name (IO1L, 0x80) - //Name (IO2B, 0x0295) // Hardware monitor - //Name (IO2L, 0x02) - Name (PMBS, 0x2000) // Power Management Base - Name (PMLN, 0xC0) // Power Management Length - Name (GPBS, 0x20C0) - Name (GPLN, 0x20) - Name (SMBS, 0x20E0) - Name (SMBL, 0x20) - -#define NO_W83627HF_FDC // don't expose the floppy disk controller -#define NO_W83627HF_FDC_ENUM // don't try to enumerate the connected floppy drives -#define NO_W83627HF_PPORT // don't expose the parallel port -//#define NO_W83627HF_UARTA // don't expose the first serial port -#define NO_W83627HF_UARTB // don't expose the second serial port (already hidden - // if UARTB is configured as IRDA port by firmware) -#define NO_W83627HF_IRDA // don't expose the IRDA port (already hidden if UARTB is - // configured as serial port by firmware) -#define NO_W83627HF_CIR // don't expose the Consumer Infrared functionality -//#define NO_W83627HF_KBC // don't expose the keyboard controller -//#define NO_W83627HF_PS2M // don't expose the PS/2 mouse functionality of the - // keyboard controller -#define NO_W83627HF_GAME // don't expose the game port -#define NO_W83627HF_MIDI // don't expose the MIDI port -// #define NO_W83627HF_HWMON // don't expose the hardware monitor as - // PnP "Motherboard Resource" -// Scope (_PR) and relevant CPU? objects are auto-generated in SSDT - - Scope (_SB) { // Root of the bus hierarchy - Device (PCI0) { // Top PCI device (AMD K8 Northbridge 1) - - Device(MBRS) { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - External(_CRS) /* Resource Template in SSDT */ - } - - // The following symbols are assumed to be created by coreboot - External (BUSN) - External (PCIO) - External (MMIO) - External (SBLK) - External (CBST) - External (SBDN) - External (TOM1) // Top Of Memory 1 (low 4GB ?) - External (HCLK) // Hypertransport possible CLocK frequencies - External (HCDN) // Hypertransport Controller Device Numbers - - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00180000) - //Name (_UID, 0x00) - Name (_UID, 0x01) - - Name (HCIN, 0x00) // HC1 - Method (_BBN, 0, NotSerialized) { - Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - } - Method (_CRS, 0, Serialized) { - Name (BUF0, ResourceTemplate () { - // PCI Configuration address space address/data - IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) - IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h - IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x8100, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x7F00,,, - , TypeStatic) //8100h-FFFFh - DWordMemory (ResourceProducer, PosDecode, - MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000C0000, // Address Range Minimum - 0x000CFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00010000,,, - , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh - Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x03AF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x03B0,,, - , TypeStatic) //0-CF7h - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x03E0, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0918,,, - , TypeStatic) //0-CF7h - }) - _SB.OSVR () - CreateDWordField (BUF0, 0x3E, VLEN) - CreateDWordField (BUF0, 0x36, VMAX) - CreateDWordField (BUF0, 0x32, VMIN) - ShiftLeft (VGA1, 0x09, Local0) - Add (VMIN, Local0, VMAX) - Decrement (VMAX) - Store (Local0, VLEN) - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - #include "acpi/pci0_hc.asl" - } - Device (PCI1) { - Name (_HID, "PNP0A03") - Name (_ADR, 0x00190000) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) { - Return (_SB.PCI0.CBST) - } - //Name (HCIN, 0x01) // HC2 - //Method (_BBN, 0, NotSerialized) { - // Return (GBUS (GHCN(HCIN), GHCL(HCIN))) - //} - Name (_BBN, 0x00) - } - Device (PWRB) { - Name (_HID, EisaId ("PNP0C0C")) - Name (_UID, 0xAA) - Name (_STA, 0x0B) - } - } - Scope (_GPE) { - Method (_L08, 0, NotSerialized) { - Notify (_SB.PCI0, 0x02) //PME# Wakeup - Notify (_SB.PCI0.TP2P.ETHR, 0x02) - Notify (_SB.PWRB, 0x02) - } - Method (_L0F, 0, NotSerialized) { - Notify (_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup - Notify (_SB.PCI0.TP2P.USB1, 0x02) - Notify (_SB.PWRB, 0x02) - } - Method (_L22, 0, NotSerialized) { // GPIO18 (LID) - Pogo 0 Bridge B - Notify (_SB.PCI0.PG0B, 0x02) - Notify (_SB.PWRB, 0x02) - } - Method (_L29, 0, NotSerialized) { // GPIO25 (Suspend) - Pogo 0 Bridge A - Notify (_SB.PCI0.PG0A, 0x02) - Notify (_SB.PWRB, 0x02) - } - } - OperationRegion (KSB0, SystemIO, 0x72, 0x02) // CMOS ram (?) - Field (KSB0, ByteAcc, NoLock, Preserve) { - KSBI, 8, // Index - KSBD, 8 // Data - } -/* - OperationRegion (IHHM, SystemIO, IO2B, IO2L) // Hardware monitor - Field (IHHM, ByteAcc, NoLock, Preserve) { - HHMI, 8, // Index - HHMD, 8 // Data - } -*/ - // Method (_BFS, 1, NotSerialized) { - // Control method executed immediately following a wake event. - // Arg0 => Value of the sleeping state from which woken (1=S1, 2=S2 ...) - // Optional - //} - - Method (_PTS, 1, NotSerialized) { - // Control method used to Prepare To Sleep. - // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) - Or (Arg0, 0xF0, Local0) - Store (Local0, DBG8) - } - - // Method (_GTS, 1, NotSerialized) { - // Control method executed just prior to setting the sleep enable (SLP_EN) bit. - // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) - // Optional - //} - - // System _Sx states - // Four bytes must be stored for each supported power state: - // 0:7 Value for PM1a_CNT.SLP_TYP register to enter this system state. - // 8:f Value for PM1b_CNT.SLP_TYP register to enter this system state. - // To enter any given state, OSPM must write the PM1a_CNT.SLP_TYP - // register before the PM1b_CNT.SLP_TYP register. - // 10:1f Reserved - // The states are: - // S0 : Working - // S1 : Sleeping with Processor Context maintained - // S2 : Sleeping with Processor Context not maintained - // S3 : Same as S2, but more power saving (e.g. suspend to RAM) - // S4 : DRAM context not maintained (e.g. suspend to disk) - // S5 : Soft Off - // If only S0 and S5 are declared then no wake-up methods are needed - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - // S1 support should work, but never wakes up, so it's commented out - //Name (_S1, Package () { 0x01, 0x01, 0x01, 0x01 }) - //Name (_S3, Package () { 0x05, 0x05, 0x05, 0x05 }) - Name (_S5, Package () { 0x07, 0x07, 0x07, 0x07 }) - //Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) - - Method (WAK, 1, NotSerialized) {} - - Name (WAKP, Package (0x02) { 0x00, 0x00 }) - // Status - // 0: 0 Wake was signaled but failed due to lack of power. - // 1: 1 Wake was signaled but failed due to thermal condition - // 2:31 Reserved - // PSS - // 0:1f If non-zero, the effective S-state the power supply really entered. - - Method (_WAK, 1, NotSerialized) { - // System Wake - // Arg0: The value of the sleeping state from which woken (1=S1, ...) - // Result: (2 DWORD package) - ShiftLeft (Arg0, 0x04, DBG8) - WAK (Arg0) - Store (0xFF, KSBI) // Clear 0xFF in CMOS RAM - Store (0x00, KSBD) - If (LEqual (Arg0, 0x01)) { // Wake from S1 state - And (_SB.PCI0.GSTS, 0x10, Local0) - And (Local0, _SB.PCI0.GNBL, Local0) - If (Local0) { - Notify (_SB.PWRB, 0x02) - } - } - Store (_SB.PCI0.GSTS, _SB.PCI0.GSTS) - Store (_SB.PCI0.STMC, _SB.PCI0.STMC) - Store (_SB.PCI0.STC0, _SB.PCI0.STC0) - Store (_SB.PCI0.STC1, _SB.PCI0.STC1) - Store (_SB.PCI0.STHW, _SB.PCI0.STHW) - If (LEqual (Arg0, 0x03)) { // Wake from S3 state - Notify (_SB.PCI0.TP2P.USB0, 0x01) - } - Store (0xC0, _SB.PCI0.SWSM) - If (DerefOf (Index (WAKP, 0x00))) { - Store (0x00, Index (WAKP, 0x01)) - } Else { - Store (Arg0, Index (WAKP, 0x01)) - } - Return (WAKP) - } - - Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode - Method (_PIC, 1, NotSerialized) { //PIC Flag and Interface Method - // Control method that conveys interrupt model in use to the system - // firmware. OS reports interrupt model in use. - // 0 => PIC Mode - // 1 => APIC Mode - // 2 => SAPIC Mode - // 3.. => Reserved - Store (Arg0, PICF) - } - OperationRegion (DEB8, SystemIO, 0x80, 0x01) - Field (DEB8, ByteAcc, Lock, Preserve) { - DBG8, 8 - } - OperationRegion (DEB9, SystemIO, 0x90, 0x01) - Field (DEB9, ByteAcc, Lock, Preserve) { - DBG9, 8 - } - OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) - Field (EXTM, WordAcc, Lock, Preserve) { - AMEM, 32 - } - OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) - Field (VGAM, ByteAcc, Lock, Preserve) { - VGA1, 8 // Video memory length (in 2k units?) - } - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) { - Offset (0x10), - FLG0, 8 - } - OperationRegion (Z007, SystemIO, 0x21, 0x01) - Field (Z007, ByteAcc, NoLock, Preserve) { - Z008, 8 - } - OperationRegion (Z009, SystemIO, 0xA1, 0x01) - Field (Z009, ByteAcc, NoLock, Preserve) { - Z00A, 8 - } - #include "northbridge/amd/amdk8/util.asl" -} diff --git a/src/mainboard/hp/dl145_g1/fadt.c b/src/mainboard/hp/dl145_g1/fadt.c deleted file mode 100644 index b81caee..0000000 --- a/src/mainboard/hp/dl145_g1/fadt.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - * (C) Copyright 2005 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> - -extern unsigned pm_base; /* pm_base should be set in sb acpi */ - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - - acpi_header_t *header=&(fadt->header); - - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id,"COREBOOT",8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision=0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt= (u32)dsdt; - // 3=Workstation,4=Enterprise Server, 7=Performance Server - fadt->preferred_pm_profile=0x04; - fadt->sci_int=9; - - // disable system management mode by setting to 0: - fadt->smi_cmd = 0;//pm_base+0x2f; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - fadt->pm1a_evt_blk = pm_base; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = pm_base+0x04; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = 0x0000; - fadt->pm_tmr_blk = pm_base+0x08; - fadt->gpe0_blk = pm_base+0x20; - fadt->gpe1_blk = pm_base+0xb0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 8; - fadt->gpe1_base = 16; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; // > 100 means system doesnt support C2 state - fadt->p_lvl3_lat = 1001; // > 1000 means system doesnt support C3 state - fadt->flush_size = 0; // ignored if wbindv=1 in flags - fadt->flush_stride = 0; // ignored if wbindv=1 in flags - fadt->duty_offset = 1; - fadt->duty_width = 3; // 0 means duty cycle not supported - // _alrm value 0 means RTC alarm feature not supported - fadt->day_alrm = 0; // 0x7d these have to be - fadt->mon_alrm = 0; // 0x7e added to cmos.layout - fadt->century = 0; // 0x7f to make rtc alrm work - fadt->iapc_boot_arch = - ACPI_FADT_LEGACY_DEVICES | - ACPI_FADT_8042 | - // ACPI_FADT_VGA_NOT_PRESENT | - // ACPI_FADT_MSI_NOT_SUPPORTED| - // ACPI_FADT_NO_PCIE_ASPM_CONTROL| - 0; - - fadt->res2 = 0; - - fadt->flags = - ACPI_FADT_WBINVD | - // ACPI_FADT_WBINVD_FLUSH | - ACPI_FADT_C1_SUPPORTED | - // ACPI_FADT_C2_MP_SUPPORTED | - // ACPI_FADT_POWER_BUTTON | - ACPI_FADT_SLEEP_BUTTON | - // ACPI_FADT_FIXED_RTC | - // ACPI_FADT_S4_RTC_WAKE | - // ACPI_FADT_32BIT_TIMER | - // ACPI_FADT_DOCKING_SUPPORTED| - // ACPI_FADT_RESET_REGISTER | - // ACPI_FADT_SEALED_CASE | - // ACPI_FADT_HEADLESS | - // ACPI_FADT_SLEEP_TYPE | - // ACPI_FADT_PCI_EXPRESS_WAKE | - // ACPI_FADT_PLATFORM_CLOCK | - // ACPI_FADT_S4_RTC_VALID | - // ACPI_FADT_REMOTE_POWER_ON | - // ACPI_FADT_APIC_CLUSTER | - // ACPI_FADT_APIC_PHYSICAL | - 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - - fadt->res3 = 0; - fadt->res4 = 0; - fadt->res5 = 0; - - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pm_base; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pm_base+4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pm_base+0x08; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pm_base+0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 64; - fadt->x_gpe1_blk.bit_offset = 16; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = pm_base+0xb0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/hp/dl145_g1/get_bus_conf.c b/src/mainboard/hp/dl145_g1/get_bus_conf.c deleted file mode 100644 index acfa023..0000000 --- a/src/mainboard/hp/dl145_g1/get_bus_conf.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - int i; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - struct mb_sysconf_t *m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn3 = sysconf.hcdn[0] & 0xff; - - m->bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_8111_0 = m->bus_8131_0; - - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", m->bus_8111_0); - } - - /* 8131-1 */ - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,0)); - if (dev) { - m->bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", m->bus_8131_0); - } - - /* 8131-2 */ - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,0)); - if (dev) { - m->bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", m->bus_8131_0); - } - - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - m->apicid_8111 = apicid_base+0; - m->apicid_8131_1 = apicid_base+1; - m->apicid_8131_2 = apicid_base+2; -} diff --git a/src/mainboard/hp/dl145_g1/irq_tables.c b/src/mainboard/hp/dl145_g1/irq_tables.c deleted file mode 100644 index f5e19cd..0000000 --- a/src/mainboard/hp/dl145_g1/irq_tables.c +++ /dev/null @@ -1,98 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m = sysconf.mb; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_8111_0; - pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; -//pcix bridge -// write_pirq_info(pirq_info, m->bus_8131_0, (m->sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); -// pirq_info++; slot_num++; - - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/hp/dl145_g1/mb_sysconf.h b/src/mainboard/hp/dl145_g1/mb_sysconf.h deleted file mode 100644 index 3dfd5de..0000000 --- a/src/mainboard/hp/dl145_g1/mb_sysconf.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_8131_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - - unsigned sbdn3; -}; - -#endif diff --git a/src/mainboard/hp/dl145_g1/mptable.c b/src/mainboard/hp/dl145_g1/mptable.c deleted file mode 100644 index b9af38b..0000000 --- a/src/mainboard/hp/dl145_g1/mptable.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - struct mb_sysconf_t *m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, m->apicid_8111, 0x20, IO_APIC_ADDR); - { - device_t dev; - struct resource *res; - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8131_1, 0x20, res->base); - } - } - dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_8131_2, 0x20, res->base); - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0); - - // - // The commented-out lines are auto-detected on my servers. - // -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - // Integrated SMBus 2.0 - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|3, apicid_8111 , 0x15); - // Integrated AMD AC97 Audio - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|1, apicid_8111 , 0x11); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|2, apicid_8111 , 0x12); - // Integrated AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x4 <<2)|0, m->apicid_8111 , 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x0 <<2)|3, m->apicid_8111 , 0x13); - // On board ATI Rage XL - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x5 <<2)|0, apicid_8111 , 0x14); - // On board Broadcom nics - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|0, m->apicid_8131_2, 0x03); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|1, m->apicid_8131_2, 0x00); - // On board LSI SCSI - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x2 <<2)|0, apicid_8131_2, 0x02); - - // PCIX-133 Slot - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|0, m->apicid_8131_1, 0x01); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|1, apicid_8131_1, 0x02); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|2, apicid_8131_1, 0x03); - //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|3, apicid_8131_1, 0x04); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/hp/dl145_g1/resourcemap.c b/src/mainboard/hp/dl145_g1/resourcemap.c deleted file mode 100644 index 65a4610..0000000 --- a/src/mainboard/hp/dl145_g1/resourcemap.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * DL145G1 needs a different resource map - * This file was originally copied from the tyan/s2881 coreboot mainboard. - * - * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ - -static void setup_dl145g1_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - //PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000b20, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - //PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/hp/dl145_g1/romstage.c b/src/mainboard/hp/dl145_g1/romstage.c deleted file mode 100644 index 2b42e73..0000000 --- a/src/mainboard/hp/dl145_g1/romstage.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se - * Subject to the GNU GPL v2, or (at your option) any later version. - */ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <delay.h> -#include "northbridge/amd/amdk8/amdk8.h" -#include "southbridge/amd/amd8111/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -#define SMBUS_HUB 0x18 - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - int ret,i; - unsigned device=(ctrl->channel0[0])>>8; - /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - } while ((ret!=0) && (i-->0)); - smbus_write_byte(SMBUS_HUB, 0x03, 0); -} - -static inline void change_i2c_mux(unsigned device) -{ - int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); - i=2; - do { - ret = smbus_write_byte(SMBUS_HUB, 0x01, device); - print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); - } while ((ret!=0) && (i-->0)); - ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); - print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n"); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "resourcemap.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#if CONFIG_SET_FIDVID -#include "cpu/amd/model_fxx/fidvid.c" -#endif - -#define RC0 ((1<<1)<<8) -#define RC1 ((1<<2)<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - //first node - RC0|DIMM0, RC0|DIMM2, 0, 0, - RC0|DIMM1, RC0|DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC1|DIMM0, RC1|DIMM2, 0, 0, - RC1|DIMM1, RC1|DIMM3, 0, 0, -#endif - }; - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx,sysinfo); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_dl145g1_resource_map(); - //setup_default_resource_map(); - - setup_coherent_ht_domain(); - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - ht_setup_chains_x(sysinfo); -#if CONFIG_SET_FIDVID - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - struct cpuid_result cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - { - /* Read FIDVID_STATUS */ - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } - - } else { - print_debug("Changing FIDVID not supported\n"); - } -#endif - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); - } - - enable_smbus(); - - int i; - for(i=0;i<2;i++) { - activate_spd_rom(&sysinfo->ctrl[i]); - } - for(i=RC0;i<=RC1;i<<=1) { - change_i2c_mux(i); - } - - //dump_spd_registers(&sysinfo->ctrl[0]); - //dump_spd_registers(&sysinfo->ctrl[1]); - //dump_smbus_registers(); - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - memreset_setup(); -#if CONFIG_SET_FIDVID - init_timer(); // Need to use TMICT to synchronize FID/VID -#endif - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - //dump_pci_devices(); - - post_cache_as_ram(); -} diff --git a/src/mainboard/hp/dl145_g3/Kconfig b/src/mainboard/hp/dl145_g3/Kconfig deleted file mode 100644 index 439188a..0000000 --- a/src/mainboard/hp/dl145_g3/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -if BOARD_HP_DL145_G3 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM21000 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select SUPERIO_SERVERENGINES_PILOT - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default hp/dl145_g3 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "ProLiant DL145 G3" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 15 - -endif # BOARD_HP_DL145_G3 diff --git a/src/mainboard/hp/dl145_g3/board_info.txt b/src/mainboard/hp/dl145_g3/board_info.txt deleted file mode 100644 index 8c2a4af..0000000 --- a/src/mainboard/hp/dl145_g3/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c0081... diff --git a/src/mainboard/hp/dl145_g3/cmos.layout b/src/mainboard/hp/dl145_g3/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/hp/dl145_g3/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/hp/dl145_g3/devicetree.cb b/src/mainboard/hp/dl145_g3/devicetree.cb deleted file mode 100644 index 7012cf9..0000000 --- a/src/mainboard/hp/dl145_g3/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - chip northbridge/amd/amdk8 # northbridge - device pci 18.0 on # devices on link 0 - chip southbridge/broadcom/bcm21000 # HT2100 - device pci 0.0 on - end # bridge to slot PCI-E 4x ?? - device pci 1.0 on - end - device pci 2.0 on - end # unused - device pci 3.0 on # bridge to slot PCI-E 16x ?? - end - device pci 4.0 on - end # unused - device pci 5.0 on - device pci 4.0 on end # BCM5715 NIC - device pci 4.1 on end # BCM5715 NIC - end - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PCI/PCI-X bridge 0x0104 - device pci e.0 on end # SATA 0x024a - end - device pci 1.0 on end # Legacy pci main 0x0205 - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.3 off # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.4 off end # SWC - device pnp 4e.5 off end # Mouse - device pnp 4e.6 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.7 off end # GPIO - device pnp 4e.f off end # XBUS - device pnp 4e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end # end superio - end # end pci 1.2 - device pci 1.3 off end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # VGA - end - end - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - - end #domain -end - - diff --git a/src/mainboard/hp/dl145_g3/get_bus_conf.c b/src/mainboard/hp/dl145_g3/get_bus_conf.c deleted file mode 100644 index ba0fc88..0000000 --- a/src/mainboard/hp/dl145_g3/get_bus_conf.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - - - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - int i; - struct mb_sysconf_t *m; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); - printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); - if(dev) { - m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for(i = 1; i < 6; i++) { - dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); - if(dev) { - m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); - } - } - - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - for(i=0;i<3;i++) - m->apicid_bcm5785[i] = apicid_base+i; -} diff --git a/src/mainboard/hp/dl145_g3/irq_tables.c b/src/mainboard/hp/dl145_g3/irq_tables.c deleted file mode 100644 index b5ea725..0000000 --- a/src/mainboard/hp/dl145_g3/irq_tables.c +++ /dev/null @@ -1,58 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * - * Contains the IRQ Routing Table dumped directly from your - * memory, which BIOS sets up. - * - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ - -#ifdef GETPIR -#include "pirq_routing.h" -#else -#include <arch/pirq_routing.h> -#endif - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x0, /* Where the interrupt router lies (bus) */ - (0x2<<3)|0x4, - 0, /* IRQs devoted exclusively to PCI usage */ - 0, /* Vendor */ - 0, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x2a, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge - {0x00,(0x02<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge - {0x00,(0x03<<3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb - {0x00,(0x04<<3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr - {0x00,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge - {0x01,(0x0e<<3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA - {0x01,(0x0d<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge - //{0x02,(0x01<<3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0}, - {0x00,(0x06<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x03,(0x00<<3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0}, - {0x00,(0x07<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - {0x00,(0x08<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - {0x00,(0x09<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x06,(0x00<<3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge - //{0x07,(0x00<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, - {0x08,(0x04<<3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet - {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge - //{0x10,(0x01<<3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0}, - {0x40,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/hp/dl145_g3/mb_sysconf.h b/src/mainboard/hp/dl145_g3/mb_sysconf.h deleted file mode 100644 index 733258a..0000000 --- a/src/mainboard/hp/dl145_g3/mb_sysconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/hp/dl145_g3/mptable.c b/src/mainboard/hp/dl145_g3/mptable.c deleted file mode 100644 index 6c71bad..0000000 --- a/src/mainboard/hp/dl145_g3/mptable.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - - /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev = 0; - int i; - struct resource *res; - for(i=0; i<3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - printk(BIOS_DEBUG, "APIC %d base address: %llx\n",m->apicid_bcm5785[i], res->base); - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); - } - } - } - - } - - /* IRQ routing as factory BIOS */ - outb(0x01, 0xc00); outb(0x0A, 0xc01); - outb(0x17, 0xc00); outb(0x05, 0xc01); -/* outb(0x2E, 0xc00); outb(0x0B, 0xc01); */ -/* outb(0x07, 0xc00); outb(0x07, 0xc01); */ - outb(0x07, 0xc00); outb(0x0b, 0xc01); - - outb(0x24, 0xc00); outb(0x05, 0xc01); - //outb(0x00, 0xc00); outb(0x09, 0xc01); - outb(0x02, 0xc00); outb(0x0E, 0xc01); - - // 8259 registers... - outb(0xa0, 0x4d0); - outb(0x0e, 0x4d1); - - { - device_t dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7 - pci_write_config32(dev, 0x64, dword); - } - // set GEVENT pins to NO OP - outb(0x33, 0xcd6); outb(0x00, 0xcd7); - outb(0x34, 0xcd6); outb(0x00, 0xcd7); - outb(0x35, 0xcd6); outb(0x00, 0xcd7); - } - - // hide XIOAPIC PCI configuration space - { - device_t dev; - dev = dev_find_device(0x1166, 0x205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1<<26); - pci_write_config32(dev, 0x64, dword); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - - //SATA -/* printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ -/* smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ - printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); - //USB - printk(BIOS_DEBUG, "sysconf.sbdn: %d on bus: %x\n",sysconf.sbdn, m->bus_bcm5785_0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x03<<2)|0, m->apicid_bcm5785[0], 0xa); - - //VGA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x4<<2)|0, m->apicid_bcm5785[1], 0x7); - - //PCIE - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0, m->apicid_bcm5785[2], 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0, m->apicid_bcm5785[2], 0xe); - - //IDE -// outb(0x02, 0xc00); outb(0x0e, 0xc01); -// printk(BIOS_DEBUG, "MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); -// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, (0x02<<2)|1, m->apicid_bcm5785[0], 0xe); - - //onboard Broadcom GbE - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|0, m->apicid_bcm5785[2], 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|1, m->apicid_bcm5785[2], 0x4); - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - device_t dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1<<4); // enable interrupts - printk(BIOS_DEBUG, "6ch: %x\n",dword); - pci_write_config32(dev, 0x6c, dword); - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - printk(BIOS_DEBUG, "bus_isa is: %x\n", bus_isa); - mptable_lintsrc(mc, bus_isa); - - //extended table entries - smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); - smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); - smp_write_bus_hierarchy(mc, 9, 0x01, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); - - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/hp/dl145_g3/romstage.c b/src/mainboard/hp/dl145_g3/romstage.c deleted file mode 100644 index 9deaaba..0000000 --- a/src/mainboard/hp/dl145_g3/romstage.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/serverengines/pilot/pilot.h> -#include "superio/nsc/pc87417/early_serial.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/broadcom/bcm5785/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) -#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include <spd.h> -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#if 0 -#include "ipmi.c" - -static void setup_early_ipmi_serial() -{ - unsigned char result; - char channel_access[]={0x06<<2,0x40,0x04,0x80,0x05}; - char serialmodem_conf[]={0x0c<<2,0x10,0x04,0x08,0x00,0x0f}; - char serial_mux1[]={0x0c<<2,0x12,0x04,0x06}; - char serial_mux2[]={0x0c<<2,0x12,0x04,0x03}; - char serial_mux3[]={0x0c<<2,0x12,0x04,0x07}; - -// earlydbg(0x0d); - //set channel access system only - ipmi_request(5,channel_access); -// earlydbg(result); -/* - //Set serial/modem config - result=ipmi_request(6,serialmodem_conf); - earlydbg(result); - - //Set serial mux 1 - result=ipmi_request(4,serial_mux1); - earlydbg(result); - - //Set serial mux 2 - result=ipmi_request(4,serial_mux2); - earlydbg(result); - - //Set serial mux 3 - result=ipmi_request(4,serial_mux3); - earlydbg(result); -*/ -// earlydbg(0x0e); - -} -#endif - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // first node - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // second node - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - pc87417_enable_dev(RTC_DEV); /* Enable RTC */ - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -// setup_early_ipmi_serial(); - pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - bcm5785_early_setup(); - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x %08x\n", msr.hi, msr.lo); - } -#endif - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ - // init_timer(); // Need to use TMICT to synconize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_cache_as_ram(); -} diff --git a/src/mainboard/hp/dl165_g6_fam10/Kconfig b/src/mainboard/hp/dl165_g6_fam10/Kconfig deleted file mode 100644 index 985f4f5..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/Kconfig +++ /dev/null @@ -1,87 +0,0 @@ -if BOARD_HP_DL165_G6_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F_1207 - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_BROADCOM_BCM21000 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select SUPERIO_SERVERENGINES_PILOT - select SUPERIO_NSC_PC87417 - select DIMM_DDR2 - select DIMM_REGISTERED - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select AMDMCT - select QRANK_DIMM_SUPPORT - select MMCONF_SUPPORT_DEFAULT - -config MAINBOARD_DIR - string - default hp/dl165_g6_fam10 - -config DCACHE_RAM_BASE - hex - default 0xc4000 - -config DCACHE_RAM_SIZE - hex - default 0x0c000 - -config APIC_ID_OFFSET - hex - default 0 - -config MAINBOARD_PART_NUMBER - string - default "ProLiant DL165 G6 (Fam10)" - -config MAX_CPUS - int - default 12 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 15 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_01000095.h" - -config RAMBASE - hex - default 0x200000 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config BOOTBLOCK_MAINBOARD_INIT - string - default "mainboard/hp/dl165_g6_fam10/bootblock.c" - -endif # BOARD_HP_DL165_G6_FAM10 diff --git a/src/mainboard/hp/dl165_g6_fam10/board_info.txt b/src/mainboard/hp/dl165_g6_fam10/board_info.txt deleted file mode 100644 index 9b58599..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc... diff --git a/src/mainboard/hp/dl165_g6_fam10/bootblock.c b/src/mainboard/hp/dl165_g6_fam10/bootblock.c deleted file mode 100644 index 479e0b6..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/bootblock.c +++ /dev/null @@ -1,54 +0,0 @@ -#include <device/pnp_def.h> - -#define SCH4307_CONFIG_PORT 0x162e -static inline void shc4307_enter_ext_func_mode(device_t dev) -{ - unsigned port = dev >> 8; - outb(0x55, port); -} - -static inline void shc4307_exit_ext_func_mode(device_t dev) -{ - unsigned port = dev >> 8; - outb(0xaa, port); -} - -#define CMOS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x6) -#define KBD_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x7) -#define DBG_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x3) -#define REGS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0xa) - -/* FIXME: This appears to be a super-io initialisation, - * placed in the mainboard directory. - */ -void shc4307_init(void) -{ - shc4307_enter_ext_func_mode(CMOS_DEV); - pnp_set_logical_device(CMOS_DEV); /* CMOS/RTC */ - pnp_set_iobase(CMOS_DEV, PNP_IDX_IO0, 0x70); - pnp_set_iobase(CMOS_DEV, PNP_IDX_IO1, 0x72); - pnp_set_irq(CMOS_DEV, PNP_IDX_IRQ0, 8); - /* pnp_set_enable(CMOS_DEV, 3); */ - pnp_write_config(CMOS_DEV, 0x30, 3); - - pnp_set_logical_device(KBD_DEV); /* Keyboard */ - pnp_set_irq(KBD_DEV, PNP_IDX_IRQ0, 1); - pnp_set_enable(KBD_DEV, 1); - - pnp_set_logical_device(DBG_DEV); /* Debug */ - pnp_set_iobase(DBG_DEV, PNP_IDX_IO0, 0x80); - pnp_set_enable(DBG_DEV, 1); - - pnp_set_logical_device(REGS_DEV); - pnp_set_iobase(REGS_DEV, PNP_IDX_IO0, 0x600); - pnp_set_enable(REGS_DEV, 1); - - shc4307_exit_ext_func_mode(CMOS_DEV); -} - -static void bootblock_mainboard_init(void) -{ - bootblock_northbridge_init(); - bootblock_southbridge_init(); - shc4307_init(); -} diff --git a/src/mainboard/hp/dl165_g6_fam10/cmos.layout b/src/mainboard/hp/dl165_g6_fam10/cmos.layout deleted file mode 100644 index c5e27fe..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/hp/dl165_g6_fam10/devicetree.cb b/src/mainboard/hp/dl165_g6_fam10/devicetree.cb deleted file mode 100644 index 2dbcb9b..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F_1207 - device lapic 0 on end - end - end - device domain 0 on - chip northbridge/amd/amdfam10 # northbridge - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # devices on link 2 - chip southbridge/broadcom/bcm21000 # HT2100 - device pci 0.0 on - end # bridge to slot PCI-E 4x ?? - device pci 1.0 on - end - device pci 2.0 on - end # unused - device pci 3.0 on # bridge to slot PCI-E 16x ?? - end - device pci 4.0 on - end # unused - device pci 5.0 on - device pci 4.0 on end # BCM5715 NIC - device pci 4.1 on end # BCM5715 NIC - end - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PCI/PCI-X bridge 0x0104 - device pci e.0 on end # SATA 0x024a - end - device pci 1.0 on end # Legacy pci main 0x0205 - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 4e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.3 off # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.4 off end # SWC - device pnp 4e.5 off end # Mouse - device pnp 4e.6 off # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 4e.7 off end # GPIO - device pnp 4e.f off end # XBUS - device pnp 4e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end # end superio - end # end pci 1.2 - device pci 1.3 off end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # VGA - end - end - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end # amdfam10 - - end #domain -end - - diff --git a/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c b/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c deleted file mode 100644 index 099c41a..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/get_bus_conf.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -/* Here you only need to set value in pci1234 for HT-IO that could be - installed or not You may need to preset pci1234 for HTIO board, please - refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ -static u32 pci1234x[] = { - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, -}; - - -/* HT Chain device num, actually it is unit id base of every ht device - in chain, assume every chain only have 4 ht device at most */ - -static unsigned hcdnx[] = { - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, -}; - -extern void get_pci1234(void); - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - int i; - struct mb_sysconf_t *m; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 12) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); - printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); - if(dev) { - m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for(i = 1; i < 6; i++) { - dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); - if(dev) { - m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - apicid_base = 0x10; - for(i=0;i<3;i++) - m->apicid_bcm5785[i] = apicid_base+i; -} diff --git a/src/mainboard/hp/dl165_g6_fam10/irq_tables.c b/src/mainboard/hp/dl165_g6_fam10/irq_tables.c deleted file mode 100644 index 1784aec..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/irq_tables.c +++ /dev/null @@ -1,51 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * - * Contains the IRQ Routing Table dumped directly from your - * memory, which BIOS sets up. - * - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ - -#ifdef GETPIR -#include "pirq_routing.h" -#else -#include <arch/pirq_routing.h> -#endif - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 11, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x02 << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1166, /* Vendor */ - 0x36, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xe9, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x01, (0x0e << 3) | 0x0, {{0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}}, 0x0, 0x0}, /* 1166:024a */ - {0x00, (0x03 << 3) | 0x0, {{0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}}, 0x0, 0x0}, /* 1166:0223 */ - {0x00, (0x06 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x0, 0x0}, /* 1166:0140 */ - {0x00, (0x07 << 3) | 0x0, {{0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */ - {0x00, (0x08 << 3) | 0x0, {{0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */ - {0x00, (0x09 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */ - {0x00, (0x0a << 3) | 0x0, {{0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */ - {0x02, (0x02 << 3) | 0x0, {{0x28, 0xdac0}, {0x27, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 14e4:1648 */ - {0x06, (0x00 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x2, 0x0}, - {0x03, (0x00 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x2, 0x0}, - {0x07, (0x00 << 3) | 0x0, {{0x2a, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 102b:0522 */ - } -}; - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h b/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h deleted file mode 100644 index 733258a..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/mb_sysconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/hp/dl165_g6_fam10/mptable.c b/src/mainboard/hp/dl165_g6_fam10/mptable.c deleted file mode 100644 index 86f2cc6..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/mptable.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &isa_bus); - - /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev = 0; - int i; - struct resource *res; - for(i=0; i<3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - printk(BIOS_DEBUG, "APIC %d base address: %x\n",m->apicid_bcm5785[i], (int)res->base); - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); - } - } - } - - } - - /* IRQ routing as factory BIOS */ - outb(0x00, 0xc00); outb(0x09, 0xc01); - outb(0x01, 0xc00); outb(0x0a, 0xc01); - outb(0x02, 0xc00); outb(0x0e, 0xc01); - outb(0x03, 0xc00); outb(0x07, 0xc01); - outb(0x07, 0xc00); outb(0x05, 0xc01); - - // 8259 registers... - outb(0xa0, 0x4d0); - outb(0x0e, 0x4d1); - - { - device_t dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7 - pci_write_config32(dev, 0x64, dword); - } - // set GEVENT pins to NO OP - /* outb(0x33, 0xcd6); outb(0x00, 0xcd7); - outb(0x34, 0xcd6); outb(0x00, 0xcd7); - outb(0x35, 0xcd6); outb(0x00, 0xcd7); */ - } - - // hide XIOAPIC PCI configuration space - { - device_t dev; - dev = dev_find_device(0x1166, 0x205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x64); - dword |= (1<<26); - pci_write_config32(dev, 0x64, dword); - } - } - - mptable_add_isa_interrupts(mc, isa_bus, m->apicid_bcm5785[0], 0); - - /* I/O Ints: Type Polarity/Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0xe<<2)|0, m->apicid_bcm5785[0], 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x3<<2)|0, m->apicid_bcm5785[0], 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0, m->apicid_bcm5785[2], 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0, m->apicid_bcm5785[2], 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0, m->apicid_bcm5785[2], 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0, m->apicid_bcm5785[2], 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0, m->apicid_bcm5785[2], 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|0, m->apicid_bcm5785[2], 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|1, m->apicid_bcm5785[2], 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0x0<<2)|0, m->apicid_bcm5785[2], 0xa); - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - device_t dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1<<4); // enable interrupts - printk(BIOS_DEBUG, "6ch: %x\n",dword); - pci_write_config32(dev, 0x6c, dword); - } - } - - /* Local Ints: Type Polarity/Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - //extended table entries - smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); - smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); - smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); - smp_write_bus_hierarchy(mc, 8, 0x01, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); - smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); - - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/hp/dl165_g6_fam10/romstage.c b/src/mainboard/hp/dl165_g6_fam10/romstage.c deleted file mode 100644 index 474190b..0000000 --- a/src/mainboard/hp/dl165_g6_fam10/romstage.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. - * - * Copyright (C) 2007 University of Mannheim - * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 1 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include "option_table.h" -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include <spd.h> -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <superio/serverengines/pilot/pilot.h> -#include "superio/nsc/pc87417/early_serial.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdfam10/debug.c" -//#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/broadcom/bcm5785/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) -#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ - u8 val; - outb(0x3d, 0x0cd6); - outb(0x87, 0x0cd7); - - outb(0x44, 0xcd6); - val = inb(0xcd7); - outb((val & ~3) | ctrl->spd_switch_addr, 0xcd7); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" - -static const u8 spd_addr[] = { - // switch addr, 1A addr, 2A addr, 3A addr, 4A addr, 1B addr, 2B addr, 3B addr 4B addr - //first node - RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC01, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#endif -}; - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - bcm5785_enable_lpc(); - pc87417_enable_dev(RTC_DEV); /* Enable RTC */ - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ - - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - init_timer(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - /* It's the time to set ctrl in sysinfo now; */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - - bcm5785_early_setup(); - - post_cache_as_ram(); -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/hp/proliant_dl145_g1/Kconfig b/src/mainboard/hp/proliant_dl145_g1/Kconfig new file mode 100644 index 0000000..da2d50a --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/Kconfig @@ -0,0 +1,59 @@ +if BOARD_HP_PROLIANT_DL145_G1 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_940 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_AMD8131 + select SOUTHBRIDGE_AMD_AMD8111 + select SUPERIO_WINBOND_W83627HF + select HAVE_HARD_RESET + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select SET_FIDVID + select SET_FIDVID_DEBUG + select RAMINIT_SYSINFO +# select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + select DRIVERS_I2C_I2CMUX + select HAVE_ACPI_TABLES + +config MAINBOARD_DIR + string + default hp/proliant_dl145_g1 + +config APIC_ID_OFFSET + hex + default 0x0 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "ProLiant DL145 G1" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x6 + +config IRQ_SLOT_COUNT + int + default 9 + +endif # BOARD_HP_PROLIANT_DL145_G1 diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111.asl b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111.asl new file mode 100644 index 0000000..aa136ff --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111.asl @@ -0,0 +1,617 @@ +/* + * Copyright 2005 AMD + * Copyright (C) 2011, 2014 Oskar Enoksson enok@lysator.liu.se + */ +//AMD8111 +// APIC version of the interrupt routing table +Name (APIC, Package (0x04) { + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11}, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12}, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13} +}) +// PIC version of the interrupt routing table +Name (PICM, Package (0x04) { + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00}, + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00}, + Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00}, + Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00} +}) +Name (DNCG, Ones) +Method (_PRT, 0, NotSerialized) { + If (LEqual (^DNCG, Ones)) { + Store (DADD(_SB.PCI0.SBDN, 0x0001ffff), Local0) + // Update the Device Number according to SBDN + Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0)) + + Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0)) + Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0)) + + Store (0x00, ^DNCG) + } + + If (LNot (PICF)) { + Return (PICM) + } Else { + Return (APIC) + } +} + +// AMD8111 System Management I/O Mapped Registers (PMxx) +OperationRegion (PMIO, SystemIO, PMBS, 0xDF) +Field (PMIO, ByteAcc, NoLock, Preserve) { + Offset (0x1E), + SWSM, 8, // Software SMI Trigger (sets GSTS) + Offset (0x28), + GSTS, 16, // Global STatuS + GNBL, 16, // Global SMI enable + Offset (0x30), + STMC, 5, // Miscellaneous SMI Status + Offset (0x32), + ENMC, 5, // Miscellaneous SMI Enable + Offset (0x44), + STC0, 9, // TCO Status 1 + Offset (0x46), + STC1, 4, // TCO Status 2 + Offset (0xA8), + STHW, 20 // Device monitor SMI Interrupt Enable +} +Device (HPET) { + Name (HPT, 0x00) + Name (_HID, EisaId ("PNP0103")) + Name (_UID, 0x00) + Method (_STA, 0, NotSerialized) { + Return (0x0F) + } + Method (_CRS, 0, Serialized) { + Name (BUF0, ResourceTemplate () { + Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400) + }) + Return (BUF0) + } +} +#include "amd8111_pic.asl" +#include "amd8111_isa.asl" + +Device (TP2P) { + // 8111 P2P and it should 0x00030000 when 8131 present + Method (_ADR, 0, NotSerialized) { + Return (DADD(_SB.PCI0.SBDN, 0x00000000)) + } + Method (_PRW, 0, NotSerialized) { // Power Resource for Wake + // result : + // [0] Bit index into GPEx_EN in the GPE block described by FADT. + // [1] The lowest power state from which the system can be awakened. + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x08, 0x03 }) + //} Else { + Return (Package (0x02) { 0x08, 0x01 }) + //} + } + Device (ETHR) { + Name (_ADR, 0x00010000) + Method (_PRW, 0, NotSerialized) { // Power Resource for Wake + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x08, 0x03 }) + //} Else { + Return (Package (0x02) { 0x08, 0x01 }) + //} + } + } + Device (USB0) { + Name (_ADR, 0x00000000) + Method (_PSW, 1, NotSerialized) { // Power State Wake + And (GNBL, 0x7FFF, GNBL) + } + Method (_PRW, 0, NotSerialized) { // Power Resource for Wake + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x0F, 0x03 }) + //} Else { + Return (Package (0x02) { 0x0F, 0x01 }) + //} + } + } + Device (USB1) { + Name (_ADR, 0x00000001) + Method (_PSW, 1, NotSerialized) { // Power State Wake + And (GNBL, 0x7FFF, GNBL) + } + Method (_PRW, 0, NotSerialized) { // Power Resource for Wake + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x0F, 0x03 }) + //} Else { + Return (Package (0x02) { 0x0F, 0x01 }) + //} + } + } + Name (APIC, Package (0x0C) { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 6 + Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 5 + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 } + }) + Name (PICM, Package (0x0C) { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //USB + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, //Slot 6 + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, //Slot 5 + Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 } + }) + Method (_PRT, 0, NotSerialized) { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } +} +Device (IDE0) { + Method (_ADR, 0, NotSerialized) { + Return (DADD(_SB.PCI0.SBDN, 0x00010001)) + } + Name (REGF, 0x01) + Method (_REG, 2, NotSerialized) { + If (LEqual (Arg0, 0x02)) { + Store (Arg1, REGF) + } + } + OperationRegion (BAR0, PCI_Config, 0x00, 0x60) + Field (BAR0, ByteAcc, NoLock, Preserve) { + Offset (0x40), // EIDE Controller Configuration Register + SCEN, 1, // Secondary Channel Enable + PCEN, 1, // Primary Channel Enable + , 10, + SPWB, 1, // Secondary Port posted-write buffer for PIO modes enable + SRPB, 1, // RW (controls nothing) + PPWB, 1, // Primary Port posted-write buffer for PIO modes enable + PRPB, 1, // RW (controls nothing) + PM80, 1, // High-speed 80-pin cable enable Primary Master + PS80, 1, // High-speed 80-pin cable enable Primary Slave + SM80, 1, // High-speed 80-pin cable enable Secondary Master + SS80, 1, // High-speed 80-pin cable enable Secondary Slave + , 4, // RW (controls nothing) + Offset (0x48), + SSRT, 4, // + SSPW, 4, // + SMRT, 4, // + SMPW, 4, + PSRT, 4, + PSPW, 4, + PMRT, 4, + PMPW, 4, + SSAD, 2, + SMAD, 2, + PSAD, 2, + PMAD, 2, + Offset (0x4E), + SXRT, 4, + SXPW, 4, + PXRT, 4, + PXPW, 4, + SSUD, 8, + SMUD, 8, + PSUD, 8, + PMUD, 8, + PPDN, 1, + PPDS, 1, + , 2, + SPDN, 1, + SPDS, 1 + } + Name (TIM0, Package (0x06) { + Package (0x05) { + 0x78, + 0xB4, + 0xF0, + 0x0186, + 0x0258 + }, + Package (0x07) { + 0x78, + 0x5A, + 0x3C, + 0x2D, + 0x1E, + 0x14, + 0x0F + }, + Package (0x08) { + 0x04, + 0x03, + 0x02, + 0x01, + 0x00, + 0x00, + 0x00, + 0x00 + }, + Package (0x03) { + 0x02, + 0x01, + 0x00 + }, + Package (0x05) { + 0x20, + 0x22, + 0x42, + 0x65, + 0xA8 + }, + Package (0x07) { + 0xC2, + 0xC1, + 0xC0, + 0xC4, + 0xC5, + 0xC6, + 0xC7 + } + }) + Name (TMD0, Buffer (0x14) {}) + CreateDWordField (TMD0, 0x00, PIO0) + CreateDWordField (TMD0, 0x04, DMA0) + CreateDWordField (TMD0, 0x08, PIO1) + CreateDWordField (TMD0, 0x0C, DMA1) + CreateDWordField (TMD0, 0x10, CHNF) + Device (CHN0) { + Name (_ADR, 0x00) + Method (_STA, 0, NotSerialized) { + If (PCEN) { Return (0x0F) } + Else { Return (0x09) } + } + Method (_GTM, 0, NotSerialized) { + Return (GTM (PMPW, PMRT, PSPW, PSRT, PMUD, PSUD)) + } + Method (_STM, 3, NotSerialized) { + Store (Arg0, TMD0) + Store (STM (), Local0) + And (Local0, 0xFF, PSUD) + ShiftRight (Local0, 0x08, Local0) + And (Local0, 0xFF, PMUD) + ShiftRight (Local0, 0x08, Local0) + And (Local0, 0x0F, PSRT) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, PSPW) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, PMRT) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, PMPW) + Store (GTF (0x00, Arg1), ATA0) + Store (GTF (0x01, Arg2), ATA1) + } + Device (DRV0) { + Name (_ADR, 0x00) + Method (_GTF, 0, NotSerialized) { + Return (RATA (ATA0)) + } + } + Device (DRV1) { + Name (_ADR, 0x01) + Method (_GTF, 0, NotSerialized) { + Return (RATA (ATA1)) + } + } + } + Device (CHN1) { + Name (_ADR, 0x01) + Method (_STA, 0, NotSerialized) { + If (SCEN) { Return (0x0F) } + Else { Return (0x09) } + } + Method (_GTM, 0, NotSerialized) { + Return (GTM (SMPW, SMRT, SSPW, SSRT, SMUD, SSUD)) + } + Method (_STM, 3, NotSerialized) { + Store (Arg0, TMD0) + Store (STM (), Local0) + And (Local0, 0xFF, SSUD) + ShiftRight (Local0, 0x08, Local0) + And (Local0, 0xFF, SMUD) + ShiftRight (Local0, 0x08, Local0) + And (Local0, 0x0F, SSRT) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, SSPW) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, SMRT) + ShiftRight (Local0, 0x04, Local0) + And (Local0, 0x0F, SMPW) + Store (GTF (0x00, Arg1), ATA2) + Store (GTF (0x01, Arg2), ATA3) + } + Device (DRV0) { + Name (_ADR, 0x00) + Method (_GTF, 0, NotSerialized) { + Return (RATA (ATA2)) + } + } + Device (DRV1) { + Name (_ADR, 0x01) + Method (_GTF, 0, NotSerialized) { + Return (RATA (ATA3)) + } + } + } + Method (GTM, 6, Serialized) { + Store (Ones, PIO0) + Store (Ones, PIO1) + Store (Ones, DMA0) + Store (Ones, DMA1) + Store (0x1A, CHNF) + If (REGF) {} + Else { Return (TMD0) } + Add (Arg0, Arg1, Local0) + Add (Local0, 0x02, Local0) + Multiply (Local0, 0x1E, PIO0) + Add (Arg2, Arg3, Local0) + Add (Local0, 0x02, Local0) + Multiply (Local0, 0x1E, PIO1) + If (And (Arg4, 0x40)) { + Or (CHNF, 0x01, CHNF) + And (Arg4, 0x07, Local0) + If (LLess (Local0, 0x04)) { + Add (Local0, 0x02, Local0) + Multiply (Local0, 0x1E, DMA0) + } Else { + If (LEqual (Local0, 0x04)) { + Store (0x2D, DMA0) + } Else { + If (LEqual (Local0, 0x05)) { + Store (0x1E, DMA0) + } Else { + If (LEqual (Local0, 0x06)) { + Store (0x14, DMA0) + } Else { + If (LEqual (Local0, 0x07)) { + Store (0x0F, DMA0) + } Else { + Store (PIO0, DMA0) + } + } + } + } + } + } Else { + Store (PIO0, DMA0) + } + If (And (Arg5, 0x40)) { + Or (CHNF, 0x04, CHNF) + And (Arg5, 0x07, Local0) + If (LLess (Local0, 0x04)) { + Add (Local0, 0x02, Local0) + Multiply (Local0, 0x1E, DMA1) + } Else { + If (LEqual (Local0, 0x04)) { + Store (0x2D, DMA1) + } Else { + If (LEqual (Local0, 0x05)) { + Store (0x1E, DMA1) + } Else { + If (LEqual (Local0, 0x06)) { + Store (0x14, DMA1) + } Else { + If (LEqual (Local0, 0x07)) { + Store (0x0F, DMA0) + } Else { + Store (PIO1, DMA1) + } + } + } + } + } + } Else { + Store (PIO1, DMA1) + } + Return (TMD0) + } + Method (STM, 0, Serialized) { + If (REGF) {} + Else { Return (0xFFFFFFFF) } + If (LEqual (PIO0, 0xFFFFFFFF)) { + Store (0xA8, Local1) + } Else { + And (Match (DerefOf (Index (TIM0, 0x00)), + MGE, PIO0, MTR, + 0x00, 0x00), + 0x07, Local0) + Store (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), + Local1) + } + ShiftLeft (Local1, 0x08, Local1) + If (LEqual (PIO1, 0xFFFFFFFF)) { + Or (Local1, 0xA8, Local1) + } Else { + And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIO1, MTR, + 0x00, 0x00), 0x07, Local0) + Or (DerefOf (Index (DerefOf (Index (TIM0, 0x04)), Local0)), + Local1, Local1) + } + ShiftLeft (Local1, 0x08, Local1) + If (LEqual (DMA0, 0xFFFFFFFF)) { + Or (Local1, 0x03, Local1) + } Else { + If (And (CHNF, 0x01)) { + And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA0, MTR, + 0x00, 0x00), 0x07, Local0) + Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), + Local1, Local1) + } Else { + Or (Local1, 0x03, Local1) + } + } + ShiftLeft (Local1, 0x08, Local1) + If (LEqual (DMA1, 0xFFFFFFFF)) { + Or (Local1, 0x03, Local1) + } Else { + If (And (CHNF, 0x04)) { + And (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMA1, MTR, + 0x00, 0x00), 0x07, Local0) + Or (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Local0)), + Local1, Local1) + } Else { + Or (Local1, 0x03, Local1) + } + } + Return (Local1) + } + Name (AT01, Buffer (0x07) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0xEF + }) + Name (AT02, Buffer (0x07) { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90 + }) + Name (AT03, Buffer (0x07) { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6 + }) + Name (AT04, Buffer (0x07) { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91 + }) + Name (ATA0, Buffer (0x1D) {}) + Name (ATA1, Buffer (0x1D) {}) + Name (ATA2, Buffer (0x1D) {}) + Name (ATA3, Buffer (0x1D) {}) + Name (ATAB, Buffer (0x1D) {}) + CreateByteField (ATAB, 0x00, CMDC) + Method (GTFB, 3, Serialized) { + Multiply (CMDC, 0x38, Local0) + Add (Local0, 0x08, Local1) + CreateField (ATAB, Local1, 0x38, CMDX) + Multiply (CMDC, 0x07, Local0) + CreateByteField (ATAB, Add (Local0, 0x02), A001) + CreateByteField (ATAB, Add (Local0, 0x06), A005) + Store (Arg0, CMDX) + Store (Arg1, A001) + Store (Arg2, A005) + Increment (CMDC) + } + Method (GTF, 2, Serialized) { + Store (Arg1, Debug) + Store (0x00, CMDC) + Name (ID49, 0x0C00) + Name (ID59, 0x00) + Name (ID53, 0x04) + Name (ID63, 0x0F00) + Name (ID88, 0x0F00) + Name (IRDY, 0x01) + Name (PIOT, 0x00) + Name (DMAT, 0x00) + If (LEqual (SizeOf (Arg1), 0x0200)) { + CreateWordField (Arg1, 0x62, IW49) + Store (IW49, ID49) + CreateWordField (Arg1, 0x6A, IW53) + Store (IW53, ID53) + CreateWordField (Arg1, 0x7E, IW63) + Store (IW63, ID63) + CreateWordField (Arg1, 0x76, IW59) + Store (IW59, ID59) + CreateWordField (Arg1, 0xB0, IW88) + Store (IW88, ID88) + } + Store (0xA0, Local7) + If (Arg0) { + Store (0xB0, Local7) + And (CHNF, 0x08, IRDY) + If (And (CHNF, 0x10)) { + Store (PIO1, PIOT) + } Else { + Store (PIO0, PIOT) + } + If (And (CHNF, 0x04)) { + If (And (CHNF, 0x10)) { + Store (DMA1, DMAT) + } Else { + Store (DMA0, DMAT) + } + } Else { + Store (PIO1, DMAT) + } + } Else { + And (CHNF, 0x02, IRDY) + Store (PIO0, PIOT) + If (And (CHNF, 0x01)) { + Store (DMA0, DMAT) + } + } + If (LAnd (LAnd (And (ID53, 0x04), And (ID88, 0xFF00)), DMAT)) { + Store (Match (DerefOf (Index (TIM0, 0x01)), MLE, DMAT, MTR, + 0x00, 0x00), Local1) + If (LGreater (Local1, 0x06)) { + Store (0x06, Local1) + } + GTFB (AT01, Or (0x40, Local1), Local7) + } Else { + If (LAnd (And (ID63, 0xFF00), PIOT)) { + And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, + 0x00, 0x00), 0x07, Local0) + If (Local0) { + If (And (Local0, 0x04)) { + Store (0x02, Local0) + } Else { + Store (0x01, Local0) + } + } + Or (0x20, DerefOf (Index (DerefOf (Index (TIM0, 0x03)), Local0 + )), Local1) + GTFB (AT01, Local1, Local7) + } + } + If (IRDY) { + And (Match (DerefOf (Index (TIM0, 0x00)), MGE, PIOT, MTR, + 0x00, 0x00), 0x07, Local0) + Or (0x08, DerefOf (Index (DerefOf (Index (TIM0, 0x02)), Local0 + )), Local1) + GTFB (AT01, Local1, Local7) + } Else { + If (And (ID49, 0x0400)) { + GTFB (AT01, 0x01, Local7) + } + } + If (LAnd (And (ID59, 0x0100), And (ID59, 0xFF))) { + GTFB (AT03, And (ID59, 0xFF), Local7) + } + Store (ATAB, Debug) + Return (ATAB) + } + Method (RATA, 1, NotSerialized) { + CreateByteField (Arg0, 0x00, CMDN) + Multiply (CMDN, 0x38, Local0) + CreateField (Arg0, 0x08, Local0, RETB) + Store (RETB, Debug) + Return (RETB) + } +} +Device (PMF) { + // acpi smbus it should be 0x00040003 if 8131 present + Method (_ADR, 0, NotSerialized) + { + Return (DADD(_SB.PCI0.SBDN, 0x00010003)) + } + OperationRegion (BAR0, PCI_Config, 0x00, 0xff) + Field (BAR0, ByteAcc, NoLock, Preserve) { + Offset (0x56), + PIRA, 4, + PIRB, 4, + PIRC, 4, + PIRD, 4 + } + //OperationRegion (TS3_, PCI_Config, 0xC4, 0x02) + //Field (TS3_, DWordAcc, NoLock, Preserve) { + // PTS3, 16 + //} +} diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_isa.asl b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_isa.asl new file mode 100644 index 0000000..be2a1ff --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_isa.asl @@ -0,0 +1,155 @@ +/* + * Copyright 2005 AMD + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + */ +//AMD8111 isa + +Device (ISA) { + // lpc 0x00040000 + Method (_ADR, 0, NotSerialized) { + Return (DADD(_SB.PCI0.SBDN, 0x00010000)) + } + /* + OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers + Field (PIRY, ByteAcc, NoLock, Preserve) { + Z000, 2, // Parallel Port Range + , 1, + ECP , 1, // ECP Enable + FDC1, 1, // Floppy Drive Controller 1 + FDC2, 1, // Floppy Drive Controller 2 + Offset (0x01), + Z001, 3, // Serial Port A Range + SAEN, 1, // Serial Post A Enabled + Z002, 3, // Serial Port B Range + SBEN, 1 // Serial Post B Enabled + } + */ + Device (PIC) { + Name (_HID, EisaId ("PNP0000")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0020, 0x0020, 0x01, 0x02) // Master Interrupt controller + IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02) // Slave Interrupt controller + IRQ (Edge, ActiveHigh, Exclusive) {2} + }) + } + Device (DMA1) { + Name (_HID, EisaId ("PNP0200")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0000, 0x0000, 0x01, 0x10) // Slave DMA controller + IO (Decode16, 0x0080, 0x0080, 0x01, 0x10) // DMA page registers + IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20) // Master DMA controller + DMA (Compatibility, NotBusMaster, Transfer16) {4} + }) + } + Device (TMR) { + Name (_HID, EisaId ("PNP0100")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0040, 0x0040, 0x01, 0x04) // Programmable Interval timer + IRQ (Edge, ActiveHigh, Exclusive) {0} + }) + } + Device (RTC) { + Name (_HID, EisaId ("PNP0B00")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0070, 0x0070, 0x01, 0x04) // Realtime Clock and CMOS ram + IRQ (Edge, ActiveHigh, Exclusive) {8} + }) + } + Device (SPKR) { + Name (_HID, EisaId ("PNP0800")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x0061, 0x0061, 0x01, 0x01) // PC speaker + }) + } + Device (COPR) { // Co-processor + Name (_HID, EisaId ("PNP0C04")) + Name (_CRS, ResourceTemplate () { + IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10) // Floating point Error control + IRQ (Edge, ActiveHigh, Exclusive) {13} + }) + } + Device (SYSR) { // System control registers (?) + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x00) + Name (CRS, ResourceTemplate () { + IO (Decode16, 0x0010, 0x0010, 0x01, 0x10) + IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E) + IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C) + IO (Decode16, 0x0062, 0x0062, 0x01, 0x02) + IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B) + IO (Decode16, 0x0074, 0x0074, 0x01, 0x0C) + IO (Decode16, 0x0080, 0x0080, 0x01, 0x01) + IO (Decode16, 0x0084, 0x0084, 0x01, 0x03) + IO (Decode16, 0x0088, 0x0088, 0x01, 0x01) + IO (Decode16, 0x008C, 0x008C, 0x01, 0x03) + IO (Decode16, 0x0090, 0x0090, 0x01, 0x10) + IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E) + IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10) + // IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + // EISA defined level triggered interrupt control registers + IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) + // IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error + // IO (Decode16, 0xDE00, 0xDE00, 0x00, 0x80) + // IO (Decode16, 0xDE80, 0xDE80, 0x00, 0x80) + IO (Decode16,0xDE00,0xDE00,0x00,0x80) + IO (Decode16,0xDE80,0xDE80,0x00,0x80) + // IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM + // IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80) + IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0D) // PMBS block + IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0E) // SMBS block + IO (Decode16, 0x0000, 0x0000, 0x00, 0x00,_Y0F) // GPBS block + }) + Method (_CRS, 0, NotSerialized) { + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0D._MIN, GP00) + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0D._MAX, GP01) + CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0D._LEN, GP0L) + Store (PMBS, GP00) + Store (PMBS, GP01) + Store (PMLN, GP0L) + If (SMBS) { + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0E._MIN, GP10) + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0E._MAX, GP11) + CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0E._LEN, GP1L) + Store (SMBS, GP10) + Store (SMBS, GP11) + Store (SMBL, GP1L) + } + If (GPBS) { + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0F._MIN, GP20) + CreateWordField (CRS, _SB.PCI0.ISA.SYSR._Y0F._MAX, GP21) + CreateByteField (CRS, _SB.PCI0.ISA.SYSR._Y0F._LEN, GP2L) + Store (GPBS, GP20) + Store (GPBS, GP21) + Store (GPLN, GP2L) + } + Return (CRS) + } + } + Device (MEM) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + Method (_CRS, 0, Serialized) { + Name (BUF0, ResourceTemplate () { + Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF + Memory32Fixed (ReadWrite, 0x000C0000, 0x00010000) // video BIOS c0000-c8404 + Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC + Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM + Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC + Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS + }) +// Read the Video Memory length + CreateDWordField (BUF0, 0x14, CLEN) + CreateDWordField (BUF0, 0x10, CBAS) + + ShiftLeft (VGA1, 0x09, Local0) + Store (Local0, CLEN) + + Return (BUF0) + } + } +#include "superio/winbond/w83627hf/acpi/superio.asl" +} diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_pic.asl b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_pic.asl new file mode 100644 index 0000000..a09c576 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8111_pic.asl @@ -0,0 +1,231 @@ +/* + * Copyright 2005 AMD + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + */ +//AMD8111 pic LNKA B C D + +Device (LNKA) { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + Method (_STA, 0, NotSerialized) { + If (LEqual (_SB.PCI0.PMF.PIRA, 0x00) ) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + Method (_PRS, 0, Serialized) { + Name (BUFA, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + Method (_DIS, 0, NotSerialized) { + Store (0x00, _SB.PCI0.PMF.PIRA ) + } + + Method (_CRS, 0, Serialized) { + Name (BUFA, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local2) + Store (0x00, Local3) + Store (_SB.PCI0.PMF.PIRA, Local1) + If (LNot (LEqual (Local1, 0x00))) { // Routing enable + If (LGreater (Local1, 0x07)) { + Subtract (Local1, 0x08, Local1) + ShiftLeft (One, Local1, Local3) + } Else { + If (LGreater (Local1, 0x00)) { + ShiftLeft (One, Local1, Local2) + } + } + Store (Local2, IRA1) + Store (Local3, IRA2) + } + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + Store(Local1,_SB.PCI0.PMF.PIRA) + } +} + +Device (LNKB) { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) { + If (LEqual (_SB.PCI0.PMF.PIRB, 0x00) ) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + + Method (_PRS, 0, Serialized) { + Name (BUFB, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + + Method (_DIS, 0, NotSerialized) { + Store (0x00, _SB.PCI0.PMF.PIRB ) + } + + Method (_CRS, 0, Serialized) { + Name (BUFB, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRA1) + CreateByteField (BUFB, 0x02, IRA2) + Store (0x00, Local2) + Store (0x00, Local3) + Store (_SB.PCI0.PMF.PIRB, Local1) + If (LNot (LEqual (Local1, 0x00))) { // Routing enable + If (LGreater (Local1, 0x07)) { + Subtract (Local1, 0x08, Local1) + ShiftLeft (One, Local1, Local3) + } Else { + If (LGreater (Local1, 0x00)) { + ShiftLeft (One, Local1, Local2) + } + } + Store (Local2, IRA1) + Store (Local3, IRA2) + } + Return (BUFB) + } + + Method (_SRS, 1, NotSerialized) { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + Store(Local1,_SB.PCI0.PMF.PIRB) + } +} + +Device (LNKC) { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + Method (_STA, 0, NotSerialized) { + If (LEqual (_SB.PCI0.PMF.PIRC, 0x00) ) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + + Method (_PRS, 0, Serialized) { + Name (BUFA, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFA) + } + + Method (_DIS, 0, NotSerialized) { + Store (0x00, _SB.PCI0.PMF.PIRC ) + } + + Method (_CRS, 0, Serialized) { + Name (BUFA, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFA, 0x01, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local2) + Store (0x00, Local3) + Store (_SB.PCI0.PMF.PIRC, Local1) + If (LNot (LEqual (Local1, 0x00))) { // Routing enable + If (LGreater (Local1, 0x07)) { + Subtract (Local1, 0x08, Local1) + ShiftLeft (One, Local1, Local3) + } Else { + If (LGreater (Local1, 0x00)) { + ShiftLeft (One, Local1, Local2) + } + } + Store (Local2, IRA1) + Store (Local3, IRA2) + } + Return (BUFA) + } + + Method (_SRS, 1, NotSerialized) { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + Store(Local1,_SB.PCI0.PMF.PIRC) + } +} + +Device (LNKD) { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + Method (_STA, 0, NotSerialized) { + If (LEqual (_SB.PCI0.PMF.PIRD, 0x00) ) { Return (0x09) } //Disabled + Else { Return (0x0B) } //Enabled + } + Method (_PRS, 0, Serialized) { + Name (BUFB, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {3,5,10,11} + }) + Return (BUFB) + } + Method (_DIS, 0, NotSerialized) { + Store (0x00, _SB.PCI0.PMF.PIRD ) + } + Method (_CRS, 0, Serialized) { + Name (BUFB, ResourceTemplate () { + IRQ (Level, ActiveLow, Shared) {} + }) + CreateByteField (BUFB, 0x01, IRA1) + CreateByteField (BUFB, 0x02, IRA2) + Store (0x00, Local2) + Store (0x00, Local3) + Store (_SB.PCI0.PMF.PIRD, Local1) + If (LNot (LEqual (Local1, 0x00))) { // Routing enable + If (LGreater (Local1, 0x07)) { + Subtract (Local1, 0x08, Local1) + ShiftLeft (One, Local1, Local3) + } Else { + If (LGreater (Local1, 0x00)) { + ShiftLeft (One, Local1, Local2) + } + } + Store (Local2, IRA1) + Store (Local3, IRA2) + } + Return (BUFB) + } + Method (_SRS, 1, NotSerialized) { + CreateByteField (Arg0, 0x01, IRA1) + CreateByteField (Arg0, 0x02, IRA2) + ShiftLeft (IRA2, 0x08, Local0) + Or (Local0, IRA1, Local0) + Store (0x00, Local1) + ShiftRight (Local0, 0x01, Local0) + While (LGreater (Local0, 0x00)) { + Increment (Local1) + ShiftRight (Local0, 0x01, Local0) + } + Store(Local1,_SB.PCI0.PMF.PIRD) + } +} diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi/amd8131.asl b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8131.asl new file mode 100644 index 0000000..54aae73 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi/amd8131.asl @@ -0,0 +1,101 @@ +/* + * Copyright 2005 AMD + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + */ + +Device (PG0A) { +/* 8131 pcix bridge 1 */ + Method (_ADR, 0, NotSerialized) { + Return (DADD(GHCD(HCIN, 0), 0x00000000)) + } + Method (_PRW, 0, NotSerialized) { + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x29, 0x03 }) + //} Else { + Return (Package (0x02) { 0x29, 0x01 }) + //} + } + Name (APIC, Package (0x0c) { + // Slot 3 - PIRQ BCDA ---- verified + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 3 + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A }, + Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 }, + // Slot 4 - PIRQ CDAB ---- verified + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1A }, //? + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x18 }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x19 }, + // Onboard NIC 1 - PIRQ DABC + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1B }, //? + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x18 }, + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x19 }, + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x1A }, + // NIC 2 - PIRQ ABCD -- verified + // Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x18 }, //? + // Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x19 }, + // Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x1A }, + // Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x1B }, + // SERIAL ATA - PIRQ BCDA + // Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x19 }, //? + // Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x1A }, + // Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x1B }, + // Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x18 } + }) + Name (PICM, Package (0x0c) { + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 },//Slot 3 + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x03, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x02, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x03, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x02, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0003FFFF, 0x03, _SB.PCI0.LNKC, 0x00 }, + // Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + // Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + // Package (0x04) { 0x0004FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + // Package (0x04) { 0x0004FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + // Package (0x04) { 0x0005FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, + // Package (0x04) { 0x0005FFFF, 0x01, _SB.PCI0.LNKC, 0x00 }, + // Package (0x04) { 0x0005FFFF, 0x02, _SB.PCI0.LNKD, 0x00 }, + // Package (0x04) { 0x0005FFFF, 0x03, _SB.PCI0.LNKA, 0x00 } + }) + Method (_PRT, 0, NotSerialized) { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } +} +Device (PG0B) { +/* 8131 pcix bridge 2 */ + Method (_ADR, 0, NotSerialized) { + Return (DADD(GHCD(HCIN, 0), 0x00010000)) + } + Method (_PRW, 0, NotSerialized) { + //If (CondRefOf (_S3, Local0)) { + // Return (Package (0x02) { 0x22, 0x03 }) + //} Else { + Return (Package (0x02) { 0x22, 0x01 }) + //} + } + Name (APIC, Package (0x04) { + // Slot A - PIRQ CDAB -- verfied + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F },// Slot 2 + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1C }, + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1D }, + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1E } + }) + Name (PICM, Package (0x04) { + Package (0x04) { 0x0003FFFF, 0x00, _SB.PCI0.LNKD, 0x00 },//Slot 2 + Package (0x04) { 0x0003FFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LNKC, 0x00 } + }) + Method (_PRT, 0, NotSerialized) { + If (LNot (PICF)) { Return (PICM) } + Else { Return (APIC) } + } +} diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi/pci0_hc.asl b/src/mainboard/hp/proliant_dl145_g1/acpi/pci0_hc.asl new file mode 100644 index 0000000..021ee1f --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi/pci0_hc.asl @@ -0,0 +1,6 @@ +/* + * Copyright (c) 2011, 2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ +#include "amd8111.asl" //real SB at first +#include "amd8131.asl" diff --git a/src/mainboard/hp/proliant_dl145_g1/acpi_tables.c b/src/mainboard/hp/proliant_dl145_g1/acpi_tables.c new file mode 100644 index 0000000..068148b --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/acpi_tables.c @@ -0,0 +1,130 @@ +/* + * Island Aruma ACPI support + * written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * + * Copyright 2005 AMD + * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + * + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Modified to work with hp/proliant_dl145_g1 + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "northbridge/amd/amdk8/acpi.h" +#include "mb_sysconf.h" +#include <cpu/amd/powernow.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base=0x18; + + struct mb_sysconf_t *m; + + get_bus_conf(); + + m = sysconf.mb; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write 8111 IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8111, + IO_APIC_ADDR, 0); + + /* Write all 8131 IOAPICs */ + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0]&0xff), 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_1, + res->base, gsi_base ); + gsi_base+=4; + + } + } + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN((sysconf.hcdn[0] & 0xff)+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8131_2, + res->base, gsi_base ); + gsi_base+=4; + } + } + + /* + int i; + int j = 0; + + for(i=1; i< sysconf.hc_possible_num; i++) { + unsigned d = 0; + if(!(sysconf.pci1234[i] & 0x1) ) continue; + // 8131 need to use +4 + + switch (sysconf.hcid[i]) { + case 1: + d = 7; + break; + case 3: + d = 4; + break; + } + switch (sysconf.hcid[i]) { + case 1: + case 3: + dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j], 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][0], + res->base, gsi_base ); + gsi_base+=d; + } + } + dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1, 1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, m->apicid_8132a[j][1], + res->base, gsi_base ); + gsi_base+=d; + + } + } + break; + } + + j++; + } + */ + + } + + current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *) + current, 0, 0, 2, 5 ); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high*/ + + + /* create all subtables for processors */ + current = acpi_create_madt_lapic_nmis(current, 5, 1); + /* 1: LINT1 connect to NMI */ + + + return current; +} + diff --git a/src/mainboard/hp/proliant_dl145_g1/board_info.txt b/src/mainboard/hp/proliant_dl145_g1/board_info.txt new file mode 100644 index 0000000..2118837 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/board_info.txt @@ -0,0 +1,6 @@ +Category: server +Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc... +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/hp/proliant_dl145_g1/cmos.layout b/src/mainboard/hp/proliant_dl145_g1/cmos.layout new file mode 100644 index 0000000..d8e2eee --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/hp/proliant_dl145_g1/devicetree.cb b/src/mainboard/hp/proliant_dl145_g1/devicetree.cb new file mode 100644 index 0000000..c955ac3 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/devicetree.cb @@ -0,0 +1,142 @@ +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x7460 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on end # link 0 + device pci 18.0 on end # link 1 + device pci 18.0 on # link 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on # PCIX Bridge A + # PCI-X expansion slot cards auto-detected here + end + device pci 0.1 on end # IOAPIC A + device pci 1.0 on # PCIX Bridge B + # On-board BCM5704 dual port ethernet chip auto-detected here + # Optional SCSI board also (?) + end + device pci 1.1 on end # IOAPIC B + device pci 2.0 off end + end + chip southbridge/amd/amd8111 + # this "device pci 0.0" is the parent of the next one + # PCI bridge + device pci 0.0 on + device pci 0.0 on end # OHCI-based USB controller 0 + device pci 0.1 on end # OCHI-based USB controller 1 + device pci 0.2 on end # EHCI-based USB2 controller + device pci 1.0 off end # LAN Ethernet controller + #device pci 4.0 on end # VGA PCI-card (auto detected) + end + device pci 1.0 on # LPC Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + #io 0x60 = 0x3f0 + #irq 0x70 = 6 + #drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + #io 0x60 = 0x378 + #irq 0x70 = 7 + #drq 0x74 = 1 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + #io 0x60 = 0x2f8 + #irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + end + device pnp 2e.7 off # GAM_MIDI_GPIO1 + #io 0x60 = 0x201 + #io 0x62 = 0x330 + #irq 0x70 = 9 + end + device pnp 2e.8 on # GPIO2 (watchdog timer) + end + device pnp 2e.9 on # GPIO3 + end + device pnp 2e.a on # ACPI + end + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end # EIDE controller + device pci 1.2 on + chip drivers/generic/generic + device i2c 8 on end # Some HW-monitor/sensor? + end + end + device pci 1.2 on + chip drivers/i2c/i2cmux # Multplexed DIMM spd eeproms. + device i2c 18 on #0 pca9516 (?) + # Some dimms also listen to address 30-33 + # It's some kind of write-protect function + # The 50-53 addresses are the interesting ones. + chip drivers/generic/generic #dimm H0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm H0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm H0-2 + device i2c 52 on end + end + chip drivers/generic/generic #dimm H0-3 + device i2c 53 on end + end + end + device i2c 18 on #1 pca9516 (?) + chip drivers/generic/generic #dimm H1-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm H1-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm H1-2 + device i2c 52 on end + end + chip drivers/generic/generic #dimm H1-3 + device i2c 53 on end + end + end + end + end + device pci 1.2 on + chip drivers/generic/generic + device i2c 69 on end # Texas Instruments cdc960 clock synthesizer + end + end # SMBus 2.0 controller + device pci 1.3 on # System management registers (ACPI) + end # System management + #device pci 1.4 off end + device pci 1.5 off end # AC97 Audio + device pci 1.6 off end # AC97 Modem + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/hp/proliant_dl145_g1/dsdt.asl b/src/mainboard/hp/proliant_dl145_g1/dsdt.asl new file mode 100644 index 0000000..05fa6de --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/dsdt.asl @@ -0,0 +1,314 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) +{ + // Name (SPIO, 0x2E) // SuperIO (w83627hf) + Name (SPI2, 0x4E) // Unknown National Semiconductors (EPM3128A?) + Name (IO1B, 0x0680) // GPIO Base (?) + Name (IO1L, 0x80) + //Name (IO2B, 0x0295) // Hardware monitor + //Name (IO2L, 0x02) + Name (PMBS, 0x2000) // Power Management Base + Name (PMLN, 0xC0) // Power Management Length + Name (GPBS, 0x20C0) + Name (GPLN, 0x20) + Name (SMBS, 0x20E0) + Name (SMBL, 0x20) + +#define NO_W83627HF_FDC // don't expose the floppy disk controller +#define NO_W83627HF_FDC_ENUM // don't try to enumerate the connected floppy drives +#define NO_W83627HF_PPORT // don't expose the parallel port +//#define NO_W83627HF_UARTA // don't expose the first serial port +#define NO_W83627HF_UARTB // don't expose the second serial port (already hidden + // if UARTB is configured as IRDA port by firmware) +#define NO_W83627HF_IRDA // don't expose the IRDA port (already hidden if UARTB is + // configured as serial port by firmware) +#define NO_W83627HF_CIR // don't expose the Consumer Infrared functionality +//#define NO_W83627HF_KBC // don't expose the keyboard controller +//#define NO_W83627HF_PS2M // don't expose the PS/2 mouse functionality of the + // keyboard controller +#define NO_W83627HF_GAME // don't expose the game port +#define NO_W83627HF_MIDI // don't expose the MIDI port +// #define NO_W83627HF_HWMON // don't expose the hardware monitor as + // PnP "Motherboard Resource" +// Scope (_PR) and relevant CPU? objects are auto-generated in SSDT + + Scope (_SB) { // Root of the bus hierarchy + Device (PCI0) { // Top PCI device (AMD K8 Northbridge 1) + + Device(MBRS) { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + External(_CRS) /* Resource Template in SSDT */ + } + + // The following symbols are assumed to be created by coreboot + External (BUSN) + External (PCIO) + External (MMIO) + External (SBLK) + External (CBST) + External (SBDN) + External (TOM1) // Top Of Memory 1 (low 4GB ?) + External (HCLK) // Hypertransport possible CLocK frequencies + External (HCDN) // Hypertransport Controller Device Numbers + + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00180000) + //Name (_UID, 0x00) + Name (_UID, 0x01) + + Name (HCIN, 0x00) // HC1 + Method (_BBN, 0, NotSerialized) { + Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + } + Method (_CRS, 0, Serialized) { + Name (BUF0, ResourceTemplate () { + // PCI Configuration address space address/data + IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) + IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h + IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x8100, // Address Range Minimum + 0xFFFF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x7F00,,, + , TypeStatic) //8100h-FFFFh + DWordMemory (ResourceProducer, PosDecode, + MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x000C0000, // Address Range Minimum + 0x000CFFFF, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00010000,,, + , AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh + Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x03AF, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x03B0,,, + , TypeStatic) //0-CF7h + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x03E0, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0918,,, + , TypeStatic) //0-CF7h + }) + _SB.OSVR () + CreateDWordField (BUF0, 0x3E, VLEN) + CreateDWordField (BUF0, 0x36, VMAX) + CreateDWordField (BUF0, 0x32, VMIN) + ShiftLeft (VGA1, 0x09, Local0) + Add (VMIN, Local0, VMAX) + Decrement (VMAX) + Store (Local0, VLEN) + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + #include "acpi/pci0_hc.asl" + } + Device (PCI1) { + Name (_HID, "PNP0A03") + Name (_ADR, 0x00190000) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) { + Return (_SB.PCI0.CBST) + } + //Name (HCIN, 0x01) // HC2 + //Method (_BBN, 0, NotSerialized) { + // Return (GBUS (GHCN(HCIN), GHCL(HCIN))) + //} + Name (_BBN, 0x00) + } + Device (PWRB) { + Name (_HID, EisaId ("PNP0C0C")) + Name (_UID, 0xAA) + Name (_STA, 0x0B) + } + } + Scope (_GPE) { + Method (_L08, 0, NotSerialized) { + Notify (_SB.PCI0, 0x02) //PME# Wakeup + Notify (_SB.PCI0.TP2P.ETHR, 0x02) + Notify (_SB.PWRB, 0x02) + } + Method (_L0F, 0, NotSerialized) { + Notify (_SB.PCI0.TP2P.USB0, 0x02) //USB Wakeup + Notify (_SB.PCI0.TP2P.USB1, 0x02) + Notify (_SB.PWRB, 0x02) + } + Method (_L22, 0, NotSerialized) { // GPIO18 (LID) - Pogo 0 Bridge B + Notify (_SB.PCI0.PG0B, 0x02) + Notify (_SB.PWRB, 0x02) + } + Method (_L29, 0, NotSerialized) { // GPIO25 (Suspend) - Pogo 0 Bridge A + Notify (_SB.PCI0.PG0A, 0x02) + Notify (_SB.PWRB, 0x02) + } + } + OperationRegion (KSB0, SystemIO, 0x72, 0x02) // CMOS ram (?) + Field (KSB0, ByteAcc, NoLock, Preserve) { + KSBI, 8, // Index + KSBD, 8 // Data + } +/* + OperationRegion (IHHM, SystemIO, IO2B, IO2L) // Hardware monitor + Field (IHHM, ByteAcc, NoLock, Preserve) { + HHMI, 8, // Index + HHMD, 8 // Data + } +*/ + // Method (_BFS, 1, NotSerialized) { + // Control method executed immediately following a wake event. + // Arg0 => Value of the sleeping state from which woken (1=S1, 2=S2 ...) + // Optional + //} + + Method (_PTS, 1, NotSerialized) { + // Control method used to Prepare To Sleep. + // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) + Or (Arg0, 0xF0, Local0) + Store (Local0, DBG8) + } + + // Method (_GTS, 1, NotSerialized) { + // Control method executed just prior to setting the sleep enable (SLP_EN) bit. + // Arg0 => Value of the sleeping state (1=S1, 2=S2 ...) + // Optional + //} + + // System _Sx states + // Four bytes must be stored for each supported power state: + // 0:7 Value for PM1a_CNT.SLP_TYP register to enter this system state. + // 8:f Value for PM1b_CNT.SLP_TYP register to enter this system state. + // To enter any given state, OSPM must write the PM1a_CNT.SLP_TYP + // register before the PM1b_CNT.SLP_TYP register. + // 10:1f Reserved + // The states are: + // S0 : Working + // S1 : Sleeping with Processor Context maintained + // S2 : Sleeping with Processor Context not maintained + // S3 : Same as S2, but more power saving (e.g. suspend to RAM) + // S4 : DRAM context not maintained (e.g. suspend to disk) + // S5 : Soft Off + // If only S0 and S5 are declared then no wake-up methods are needed + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + // S1 support should work, but never wakes up, so it's commented out + //Name (_S1, Package () { 0x01, 0x01, 0x01, 0x01 }) + //Name (_S3, Package () { 0x05, 0x05, 0x05, 0x05 }) + Name (_S5, Package () { 0x07, 0x07, 0x07, 0x07 }) + //Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + Method (WAK, 1, NotSerialized) {} + + Name (WAKP, Package (0x02) { 0x00, 0x00 }) + // Status + // 0: 0 Wake was signaled but failed due to lack of power. + // 1: 1 Wake was signaled but failed due to thermal condition + // 2:31 Reserved + // PSS + // 0:1f If non-zero, the effective S-state the power supply really entered. + + Method (_WAK, 1, NotSerialized) { + // System Wake + // Arg0: The value of the sleeping state from which woken (1=S1, ...) + // Result: (2 DWORD package) + ShiftLeft (Arg0, 0x04, DBG8) + WAK (Arg0) + Store (0xFF, KSBI) // Clear 0xFF in CMOS RAM + Store (0x00, KSBD) + If (LEqual (Arg0, 0x01)) { // Wake from S1 state + And (_SB.PCI0.GSTS, 0x10, Local0) + And (Local0, _SB.PCI0.GNBL, Local0) + If (Local0) { + Notify (_SB.PWRB, 0x02) + } + } + Store (_SB.PCI0.GSTS, _SB.PCI0.GSTS) + Store (_SB.PCI0.STMC, _SB.PCI0.STMC) + Store (_SB.PCI0.STC0, _SB.PCI0.STC0) + Store (_SB.PCI0.STC1, _SB.PCI0.STC1) + Store (_SB.PCI0.STHW, _SB.PCI0.STHW) + If (LEqual (Arg0, 0x03)) { // Wake from S3 state + Notify (_SB.PCI0.TP2P.USB0, 0x01) + } + Store (0xC0, _SB.PCI0.SWSM) + If (DerefOf (Index (WAKP, 0x00))) { + Store (0x00, Index (WAKP, 0x01)) + } Else { + Store (Arg0, Index (WAKP, 0x01)) + } + Return (WAKP) + } + + Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode + Method (_PIC, 1, NotSerialized) { //PIC Flag and Interface Method + // Control method that conveys interrupt model in use to the system + // firmware. OS reports interrupt model in use. + // 0 => PIC Mode + // 1 => APIC Mode + // 2 => SAPIC Mode + // 3.. => Reserved + Store (Arg0, PICF) + } + OperationRegion (DEB8, SystemIO, 0x80, 0x01) + Field (DEB8, ByteAcc, Lock, Preserve) { + DBG8, 8 + } + OperationRegion (DEB9, SystemIO, 0x90, 0x01) + Field (DEB9, ByteAcc, Lock, Preserve) { + DBG9, 8 + } + OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04) + Field (EXTM, WordAcc, Lock, Preserve) { + AMEM, 32 + } + OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01) + Field (VGAM, ByteAcc, Lock, Preserve) { + VGA1, 8 // Video memory length (in 2k units?) + } + OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) + Field (GRAM, ByteAcc, Lock, Preserve) { + Offset (0x10), + FLG0, 8 + } + OperationRegion (Z007, SystemIO, 0x21, 0x01) + Field (Z007, ByteAcc, NoLock, Preserve) { + Z008, 8 + } + OperationRegion (Z009, SystemIO, 0xA1, 0x01) + Field (Z009, ByteAcc, NoLock, Preserve) { + Z00A, 8 + } + #include "northbridge/amd/amdk8/util.asl" +} diff --git a/src/mainboard/hp/proliant_dl145_g1/fadt.c b/src/mainboard/hp/proliant_dl145_g1/fadt.c new file mode 100644 index 0000000..b81caee --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/fadt.c @@ -0,0 +1,183 @@ +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + * (C) Copyright 2005 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2011,2014 Oskar Enoksson enok@lysator.liu.se + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> + +extern unsigned pm_base; /* pm_base should be set in sb acpi */ + +void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ + + acpi_header_t *header=&(fadt->header); + + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt,0,sizeof(acpi_fadt_t)); + memcpy(header->signature,"FACP",4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id,OEM_ID,6); + memcpy(header->oem_table_id,"COREBOOT",8); + memcpy(header->asl_compiler_id,ASLC,4); + header->asl_compiler_revision=0; + + fadt->firmware_ctrl=(u32)facs; + fadt->dsdt= (u32)dsdt; + // 3=Workstation,4=Enterprise Server, 7=Performance Server + fadt->preferred_pm_profile=0x04; + fadt->sci_int=9; + + // disable system management mode by setting to 0: + fadt->smi_cmd = 0;//pm_base+0x2f; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + fadt->pm1a_evt_blk = pm_base; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = pm_base+0x04; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = 0x0000; + fadt->pm_tmr_blk = pm_base+0x08; + fadt->gpe0_blk = pm_base+0x20; + fadt->gpe1_blk = pm_base+0xb0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 8; + fadt->gpe1_base = 16; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; // > 100 means system doesnt support C2 state + fadt->p_lvl3_lat = 1001; // > 1000 means system doesnt support C3 state + fadt->flush_size = 0; // ignored if wbindv=1 in flags + fadt->flush_stride = 0; // ignored if wbindv=1 in flags + fadt->duty_offset = 1; + fadt->duty_width = 3; // 0 means duty cycle not supported + // _alrm value 0 means RTC alarm feature not supported + fadt->day_alrm = 0; // 0x7d these have to be + fadt->mon_alrm = 0; // 0x7e added to cmos.layout + fadt->century = 0; // 0x7f to make rtc alrm work + fadt->iapc_boot_arch = + ACPI_FADT_LEGACY_DEVICES | + ACPI_FADT_8042 | + // ACPI_FADT_VGA_NOT_PRESENT | + // ACPI_FADT_MSI_NOT_SUPPORTED| + // ACPI_FADT_NO_PCIE_ASPM_CONTROL| + 0; + + fadt->res2 = 0; + + fadt->flags = + ACPI_FADT_WBINVD | + // ACPI_FADT_WBINVD_FLUSH | + ACPI_FADT_C1_SUPPORTED | + // ACPI_FADT_C2_MP_SUPPORTED | + // ACPI_FADT_POWER_BUTTON | + ACPI_FADT_SLEEP_BUTTON | + // ACPI_FADT_FIXED_RTC | + // ACPI_FADT_S4_RTC_WAKE | + // ACPI_FADT_32BIT_TIMER | + // ACPI_FADT_DOCKING_SUPPORTED| + // ACPI_FADT_RESET_REGISTER | + // ACPI_FADT_SEALED_CASE | + // ACPI_FADT_HEADLESS | + // ACPI_FADT_SLEEP_TYPE | + // ACPI_FADT_PCI_EXPRESS_WAKE | + // ACPI_FADT_PLATFORM_CLOCK | + // ACPI_FADT_S4_RTC_VALID | + // ACPI_FADT_REMOTE_POWER_ON | + // ACPI_FADT_APIC_CLUSTER | + // ACPI_FADT_APIC_PHYSICAL | + 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + + fadt->res3 = 0; + fadt->res4 = 0; + fadt->res5 = 0; + + fadt->x_firmware_ctl_l = (u32)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pm_base; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pm_base+4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pm_base+0x08; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pm_base+0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 64; + fadt->x_gpe1_blk.bit_offset = 16; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = pm_base+0xb0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); + +} diff --git a/src/mainboard/hp/proliant_dl145_g1/get_bus_conf.c b/src/mainboard/hp/proliant_dl145_g1/get_bus_conf.c new file mode 100644 index 0000000..acfa023 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/get_bus_conf.c @@ -0,0 +1,115 @@ +/* + * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +static unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + struct mb_sysconf_t *m = sysconf.mb; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn3 = sysconf.hcdn[0] & 0xff; + + m->bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_8111_0 = m->bus_8131_0; + + /* 8111 */ + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", m->bus_8111_0); + } + + /* 8131-1 */ + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,0)); + if (dev) { + m->bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", m->bus_8131_0); + } + + /* 8131-2 */ + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,0)); + if (dev) { + m->bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", m->bus_8131_0); + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_8111 = apicid_base+0; + m->apicid_8131_1 = apicid_base+1; + m->apicid_8131_2 = apicid_base+2; +} diff --git a/src/mainboard/hp/proliant_dl145_g1/irq_tables.c b/src/mainboard/hp/proliant_dl145_g1/irq_tables.c new file mode 100644 index 0000000..f5e19cd --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/irq_tables.c @@ -0,0 +1,98 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m = sysconf.mb; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_8111_0; + pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge +// write_pirq_info(pirq_info, m->bus_8131_0, (m->sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +// pirq_info++; slot_num++; + + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/hp/proliant_dl145_g1/mb_sysconf.h b/src/mainboard/hp/proliant_dl145_g1/mb_sysconf.h new file mode 100644 index 0000000..3dfd5de --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/mb_sysconf.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_8131_0; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + + unsigned apicid_8111; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + + unsigned sbdn3; +}; + +#endif diff --git a/src/mainboard/hp/proliant_dl145_g1/mptable.c b/src/mainboard/hp/proliant_dl145_g1/mptable.c new file mode 100644 index 0000000..b9af38b --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/mptable.c @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + struct mb_sysconf_t *m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, m->apicid_8111, 0x20, IO_APIC_ADDR); + { + device_t dev; + struct resource *res; + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8131_1, 0x20, res->base); + } + } + dev = dev_find_slot(m->bus_8131_0, PCI_DEVFN(m->sbdn3+1,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_8131_2, 0x20, res->base); + } + } + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_8111, 0); + + // + // The commented-out lines are auto-detected on my servers. + // +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + // Integrated SMBus 2.0 + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|3, apicid_8111 , 0x15); + // Integrated AMD AC97 Audio + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|1, apicid_8111 , 0x11); + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_0, ( 0x4 <<2)|2, apicid_8111 , 0x12); + // Integrated AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x4 <<2)|0, m->apicid_8111 , 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x0 <<2)|3, m->apicid_8111 , 0x13); + // On board ATI Rage XL + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8111_1, ( 0x5 <<2)|0, apicid_8111 , 0x14); + // On board Broadcom nics + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|0, m->apicid_8131_2, 0x03); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x3 <<2)|1, m->apicid_8131_2, 0x00); + // On board LSI SCSI + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_2, ( 0x2 <<2)|0, apicid_8131_2, 0x02); + + // PCIX-133 Slot + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|0, m->apicid_8131_1, 0x01); + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|1, apicid_8131_1, 0x02); + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|2, apicid_8131_1, 0x03); + //smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8131_1, ( 0x1 <<2)|3, apicid_8131_1, 0x04); + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/hp/proliant_dl145_g1/resourcemap.c b/src/mainboard/hp/proliant_dl145_g1/resourcemap.c new file mode 100644 index 0000000..65a4610 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/resourcemap.c @@ -0,0 +1,268 @@ +/* + * DL145G1 needs a different resource map + * This file was originally copied from the tyan/s2881 coreboot mainboard. + * + * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ + +static void setup_dl145g1_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + //PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000b20, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + //PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/hp/proliant_dl145_g1/romstage.c b/src/mainboard/hp/proliant_dl145_g1/romstage.c new file mode 100644 index 0000000..2b42e73 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g1/romstage.c @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2011,2014 Oskar Enoksson enok@lysator.liu.se + * Subject to the GNU GPL v2, or (at your option) any later version. + */ +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include <delay.h> +#include "northbridge/amd/amdk8/amdk8.h" +#include "southbridge/amd/amd8111/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "southbridge/amd/amd8111/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); + /* Ensure the BIOS has control of the memory lines. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } else { + /* Ensure the CPU has control of the memory lines. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset high. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); + udelay(90); + } +} + +#define SMBUS_HUB 0x18 + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + int ret,i; + unsigned device=(ctrl->channel0[0])>>8; + /* the very first write always get COL_STS=1 and ABRT_STS=1, so try another time*/ + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + } while ((ret!=0) && (i-->0)); + smbus_write_byte(SMBUS_HUB, 0x03, 0); +} + +static inline void change_i2c_mux(unsigned device) +{ + int ret, i; + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + i=2; + do { + ret = smbus_write_byte(SMBUS_HUB, 0x01, device); + print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); + } while ((ret!=0) && (i-->0)); + ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); + print_debug("change_i2c_mux 2 ret="); print_debug_hex32(ret); print_debug("\n"); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include <spd.h> +#include "cpu/amd/model_fxx/init_cpus.c" +#if CONFIG_SET_FIDVID +#include "cpu/amd/model_fxx/fidvid.c" +#endif + +#define RC0 ((1<<1)<<8) +#define RC1 ((1<<2)<<8) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + //first node + RC0|DIMM0, RC0|DIMM2, 0, 0, + RC0|DIMM1, RC0|DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC1|DIMM0, RC1|DIMM2, 0, 0, + RC1|DIMM1, RC1|DIMM3, 0, 0, +#endif + }; + struct sys_info *sysinfo = &sysinfo_car; + + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx,sysinfo); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + setup_dl145g1_resource_map(); + //setup_default_resource_map(); + + setup_coherent_ht_domain(); + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + ht_setup_chains_x(sysinfo); +#if CONFIG_SET_FIDVID + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + struct cpuid_result cpuid1 = cpuid(0x80000007); + if ((cpuid1.edx & 0x6) == 0x6) { + { + /* Read FIDVID_STATUS */ + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } + + } else { + print_debug("Changing FIDVID not supported\n"); + } +#endif + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset_x(sysinfo->sbbusn, sysinfo->sbdn); + } + + enable_smbus(); + + int i; + for(i=0;i<2;i++) { + activate_spd_rom(&sysinfo->ctrl[i]); + } + for(i=RC0;i<=RC1;i<<=1) { + change_i2c_mux(i); + } + + //dump_spd_registers(&sysinfo->ctrl[0]); + //dump_spd_registers(&sysinfo->ctrl[1]); + //dump_smbus_registers(); + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + memreset_setup(); +#if CONFIG_SET_FIDVID + init_timer(); // Need to use TMICT to synchronize FID/VID +#endif + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + //dump_pci_devices(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/hp/proliant_dl145_g3/Kconfig b/src/mainboard/hp/proliant_dl145_g3/Kconfig new file mode 100644 index 0000000..e15c20c --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/Kconfig @@ -0,0 +1,67 @@ +if BOARD_HP_PROLIANT_DL145_G3 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_BROADCOM_BCM21000 + select SOUTHBRIDGE_BROADCOM_BCM5785 + select SUPERIO_SERVERENGINES_PILOT + select SUPERIO_NSC_PC87417 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_512 + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + select SET_FIDVID + +config MAINBOARD_DIR + string + default hp/proliant_dl145_g3 + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x04000 + +config APIC_ID_OFFSET + hex + default 0x8 + +config MAINBOARD_PART_NUMBER + string + default "ProLiant DL145 G3" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x6 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 15 + +endif # BOARD_HP_PROLIANT_DL145_G3 diff --git a/src/mainboard/hp/proliant_dl145_g3/board_info.txt b/src/mainboard/hp/proliant_dl145_g3/board_info.txt new file mode 100644 index 0000000..8c2a4af --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c0081... diff --git a/src/mainboard/hp/proliant_dl145_g3/cmos.layout b/src/mainboard/hp/proliant_dl145_g3/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/hp/proliant_dl145_g3/devicetree.cb b/src/mainboard/hp/proliant_dl145_g3/devicetree.cb new file mode 100644 index 0000000..7012cf9 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/devicetree.cb @@ -0,0 +1,87 @@ +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_F + device lapic 0 on end + end + end + device domain 0 on + chip northbridge/amd/amdk8 # northbridge + device pci 18.0 on # devices on link 0 + chip southbridge/broadcom/bcm21000 # HT2100 + device pci 0.0 on + end # bridge to slot PCI-E 4x ?? + device pci 1.0 on + end + device pci 2.0 on + end # unused + device pci 3.0 on # bridge to slot PCI-E 16x ?? + end + device pci 4.0 on + end # unused + device pci 5.0 on + device pci 4.0 on end # BCM5715 NIC + device pci 4.1 on end # BCM5715 NIC + end + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PCI/PCI-X bridge 0x0104 + device pci e.0 on end # SATA 0x024a + end + device pci 1.0 on end # Legacy pci main 0x0205 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.3 off # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.4 off end # SWC + device pnp 4e.5 off end # Mouse + device pnp 4e.6 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.7 off end # GPIO + device pnp 4e.f off end # XBUS + device pnp 4e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end # end superio + end # end pci 1.2 + device pci 1.3 off end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + device pci 3.0 on end # VGA + end + end + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # amdk8 + + end #domain +end + + diff --git a/src/mainboard/hp/proliant_dl145_g3/get_bus_conf.c b/src/mainboard/hp/proliant_dl145_g3/get_bus_conf.c new file mode 100644 index 0000000..ba0fc88 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/get_bus_conf.c @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +static unsigned hcdnx[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + + + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + + m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_bcm5780[0] = m->bus_bcm5785_0; + + /* bcm5785 */ + printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); + dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); + m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); + dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); + printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); + if(dev) { + m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); + } + + /* bcm5780 */ + for(i = 1; i < 6; i++) { + dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); + if(dev) { + m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); + } + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + for(i=0;i<3;i++) + m->apicid_bcm5785[i] = apicid_base+i; +} diff --git a/src/mainboard/hp/proliant_dl145_g3/irq_tables.c b/src/mainboard/hp/proliant_dl145_g3/irq_tables.c new file mode 100644 index 0000000..b5ea725 --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/irq_tables.c @@ -0,0 +1,58 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * + * Contains the IRQ Routing Table dumped directly from your + * memory, which BIOS sets up. + * + * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx + */ + +#ifdef GETPIR +#include "pirq_routing.h" +#else +#include <arch/pirq_routing.h> +#endif + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x0, /* Where the interrupt router lies (bus) */ + (0x2<<3)|0x4, + 0, /* IRQs devoted exclusively to PCI usage */ + 0, /* Vendor */ + 0, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x2a, /* u8 checksum. This has to be set to some + value that would give 0 after the sum of all + bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + {0x00,(0x02<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge + {0x00,(0x03<<3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb + {0x00,(0x04<<3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr + {0x00,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge + {0x01,(0x0e<<3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA + {0x01,(0x0d<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge + //{0x02,(0x01<<3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x06<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x03,(0x00<<3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0}, + {0x00,(0x07<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x08<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x09<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x06,(0x00<<3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x07,(0x00<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, + {0x08,(0x04<<3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + //{0x10,(0x01<<3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0}, + {0x40,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/hp/proliant_dl145_g3/mb_sysconf.h b/src/mainboard/hp/proliant_dl145_g3/mb_sysconf.h new file mode 100644 index 0000000..733258a --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/mb_sysconf.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_bcm5780[7]; + unsigned char bus_bcm5785_0; + unsigned char bus_bcm5785_1; + unsigned char bus_bcm5785_1_1; + unsigned apicid_bcm5785[3]; + + unsigned sbdn2; +}; + +#endif diff --git a/src/mainboard/hp/proliant_dl145_g3/mptable.c b/src/mainboard/hp/proliant_dl145_g3/mptable.c new file mode 100644 index 0000000..6c71bad --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/mptable.c @@ -0,0 +1,190 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/io.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + + /*I/O APICs: APIC ID Version State Address*/ + { + device_t dev = 0; + int i; + struct resource *res; + for(i=0; i<3; i++) { + dev = dev_find_device(0x1166, 0x0235, dev); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + printk(BIOS_DEBUG, "APIC %d base address: %llx\n",m->apicid_bcm5785[i], res->base); + smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); + } + } + } + + } + + /* IRQ routing as factory BIOS */ + outb(0x01, 0xc00); outb(0x0A, 0xc01); + outb(0x17, 0xc00); outb(0x05, 0xc01); +/* outb(0x2E, 0xc00); outb(0x0B, 0xc01); */ +/* outb(0x07, 0xc00); outb(0x07, 0xc01); */ + outb(0x07, 0xc00); outb(0x0b, 0xc01); + + outb(0x24, 0xc00); outb(0x05, 0xc01); + //outb(0x00, 0xc00); outb(0x09, 0xc01); + outb(0x02, 0xc00); outb(0x0E, 0xc01); + + // 8259 registers... + outb(0xa0, 0x4d0); + outb(0x0e, 0x4d1); + + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7 + pci_write_config32(dev, 0x64, dword); + } + // set GEVENT pins to NO OP + outb(0x33, 0xcd6); outb(0x00, 0xcd7); + outb(0x34, 0xcd6); outb(0x00, 0xcd7); + outb(0x35, 0xcd6); outb(0x00, 0xcd7); + } + + // hide XIOAPIC PCI configuration space + { + device_t dev; + dev = dev_find_device(0x1166, 0x205, 0); + if (dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<26); + pci_write_config32(dev, 0x64, dword); + } + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); + + //SATA +/* printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ +/* smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0x7); */ + printk(BIOS_DEBUG, "MPTABLE_SATA: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xb); + //USB + printk(BIOS_DEBUG, "sysconf.sbdn: %d on bus: %x\n",sysconf.sbdn, m->bus_bcm5785_0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x03<<2)|0, m->apicid_bcm5785[0], 0xa); + + //VGA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x4<<2)|0, m->apicid_bcm5785[1], 0x7); + + //PCIE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0, m->apicid_bcm5785[2], 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0, m->apicid_bcm5785[2], 0xe); + + //IDE +// outb(0x02, 0xc00); outb(0x0e, 0xc01); +// printk(BIOS_DEBUG, "MPTABLE_IDE: bus_id:%d irq:%d apic_id:%d pin:%d\n",m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); +// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, (0x02<<2)|1, m->apicid_bcm5785[0], 0xe); + + //onboard Broadcom GbE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|0, m->apicid_bcm5785[2], 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,8, (4<<2)|1, m->apicid_bcm5785[2], 0x4); + + + + /* enable int */ + /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x6c); + dword |= (1<<4); // enable interrupts + printk(BIOS_DEBUG, "6ch: %x\n",dword); + pci_write_config32(dev, 0x6c, dword); + } + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + printk(BIOS_DEBUG, "bus_isa is: %x\n", bus_isa); + mptable_lintsrc(mc, bus_isa); + + //extended table entries + smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); + smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); + smp_write_bus_hierarchy(mc, 9, 0x01, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); + + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/hp/proliant_dl145_g3/romstage.c b/src/mainboard/hp/proliant_dl145_g3/romstage.c new file mode 100644 index 0000000..9deaaba --- /dev/null +++ b/src/mainboard/hp/proliant_dl145_g3/romstage.c @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Tyan + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/broadcom/bcm5785/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/serverengines/pilot/pilot.h> +#include "superio/nsc/pc87417/early_serial.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/broadcom/bcm5785/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) +#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_SWITCH1 0x70 +#define SMBUS_SWITCH2 0x72 + unsigned device = (ctrl->channel0[0]) >> 8; + smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include <spd.h> +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +#if 0 +#include "ipmi.c" + +static void setup_early_ipmi_serial() +{ + unsigned char result; + char channel_access[]={0x06<<2,0x40,0x04,0x80,0x05}; + char serialmodem_conf[]={0x0c<<2,0x10,0x04,0x08,0x00,0x0f}; + char serial_mux1[]={0x0c<<2,0x12,0x04,0x06}; + char serial_mux2[]={0x0c<<2,0x12,0x04,0x03}; + char serial_mux3[]={0x0c<<2,0x12,0x04,0x07}; + +// earlydbg(0x0d); + //set channel access system only + ipmi_request(5,channel_access); +// earlydbg(result); +/* + //Set serial/modem config + result=ipmi_request(6,serialmodem_conf); + earlydbg(result); + + //Set serial mux 1 + result=ipmi_request(4,serial_mux1); + earlydbg(result); + + //Set serial mux 2 + result=ipmi_request(4,serial_mux2); + earlydbg(result); + + //Set serial mux 3 + result=ipmi_request(4,serial_mux3); + earlydbg(result); +*/ +// earlydbg(0x0e); + +} +#endif + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // first node + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // second node + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + bcm5785_enable_lpc(); + pc87417_enable_dev(RTC_DEV); /* Enable RTC */ + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +// setup_early_ipmi_serial(); + pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); + + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + bcm5785_early_setup(); + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid %08x %08x\n", msr.hi, msr.lo); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid %08x %08x\n", msr.hi, msr.lo); + } +#endif + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + printk(BIOS_INFO, "ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ + // init_timer(); // Need to use TMICT to synconize FID/VID + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); +} diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/Kconfig b/src/mainboard/hp/proliant_dl165_g6_fam10/Kconfig new file mode 100644 index 0000000..ac6462e --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/Kconfig @@ -0,0 +1,87 @@ +if BOARD_HP_PROLIANT_DL165_G6_FAM10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F_1207 + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_BROADCOM_BCM21000 + select SOUTHBRIDGE_BROADCOM_BCM5785 + select SUPERIO_SERVERENGINES_PILOT + select SUPERIO_NSC_PC87417 + select DIMM_DDR2 + select DIMM_REGISTERED + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select AMDMCT + select QRANK_DIMM_SUPPORT + select MMCONF_SUPPORT_DEFAULT + +config MAINBOARD_DIR + string + default hp/proliant_dl165_g6_fam10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + +config APIC_ID_OFFSET + hex + default 0 + +config MAINBOARD_PART_NUMBER + string + default "ProLiant DL165 G6 (Fam10)" + +config MAX_CPUS + int + default 12 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x6 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 15 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_01000095.h" + +config RAMBASE + hex + default 0x200000 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config BOOTBLOCK_MAINBOARD_INIT + string + default "mainboard/hp/proliant_dl165_g6_fam10/bootblock.c" + +endif # BOARD_HP_PROLIANT_DL165_G6_FAM10 diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/board_info.txt b/src/mainboard/hp/proliant_dl165_g6_fam10/board_info.txt new file mode 100644 index 0000000..9b58599 --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc... diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/bootblock.c b/src/mainboard/hp/proliant_dl165_g6_fam10/bootblock.c new file mode 100644 index 0000000..479e0b6 --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/bootblock.c @@ -0,0 +1,54 @@ +#include <device/pnp_def.h> + +#define SCH4307_CONFIG_PORT 0x162e +static inline void shc4307_enter_ext_func_mode(device_t dev) +{ + unsigned port = dev >> 8; + outb(0x55, port); +} + +static inline void shc4307_exit_ext_func_mode(device_t dev) +{ + unsigned port = dev >> 8; + outb(0xaa, port); +} + +#define CMOS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x6) +#define KBD_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x7) +#define DBG_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0x3) +#define REGS_DEV PNP_DEV(SCH4307_CONFIG_PORT, 0xa) + +/* FIXME: This appears to be a super-io initialisation, + * placed in the mainboard directory. + */ +void shc4307_init(void) +{ + shc4307_enter_ext_func_mode(CMOS_DEV); + pnp_set_logical_device(CMOS_DEV); /* CMOS/RTC */ + pnp_set_iobase(CMOS_DEV, PNP_IDX_IO0, 0x70); + pnp_set_iobase(CMOS_DEV, PNP_IDX_IO1, 0x72); + pnp_set_irq(CMOS_DEV, PNP_IDX_IRQ0, 8); + /* pnp_set_enable(CMOS_DEV, 3); */ + pnp_write_config(CMOS_DEV, 0x30, 3); + + pnp_set_logical_device(KBD_DEV); /* Keyboard */ + pnp_set_irq(KBD_DEV, PNP_IDX_IRQ0, 1); + pnp_set_enable(KBD_DEV, 1); + + pnp_set_logical_device(DBG_DEV); /* Debug */ + pnp_set_iobase(DBG_DEV, PNP_IDX_IO0, 0x80); + pnp_set_enable(DBG_DEV, 1); + + pnp_set_logical_device(REGS_DEV); + pnp_set_iobase(REGS_DEV, PNP_IDX_IO0, 0x600); + pnp_set_enable(REGS_DEV, 1); + + shc4307_exit_ext_func_mode(CMOS_DEV); +} + +static void bootblock_mainboard_init(void) +{ + bootblock_northbridge_init(); + bootblock_southbridge_init(); + shc4307_init(); +} diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/cmos.layout b/src/mainboard/hp/proliant_dl165_g6_fam10/cmos.layout new file mode 100644 index 0000000..c5e27fe --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/devicetree.cb b/src/mainboard/hp/proliant_dl165_g6_fam10/devicetree.cb new file mode 100644 index 0000000..2dbcb9b --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/devicetree.cb @@ -0,0 +1,90 @@ +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_F_1207 + device lapic 0 on end + end + end + device domain 0 on + chip northbridge/amd/amdfam10 # northbridge + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # devices on link 2 + chip southbridge/broadcom/bcm21000 # HT2100 + device pci 0.0 on + end # bridge to slot PCI-E 4x ?? + device pci 1.0 on + end + device pci 2.0 on + end # unused + device pci 3.0 on # bridge to slot PCI-E 16x ?? + end + device pci 4.0 on + end # unused + device pci 5.0 on + device pci 4.0 on end # BCM5715 NIC + device pci 4.1 on end # BCM5715 NIC + end + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PCI/PCI-X bridge 0x0104 + device pci e.0 on end # SATA 0x024a + end + device pci 1.0 on end # Legacy pci main 0x0205 + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.3 off # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.4 off end # SWC + device pnp 4e.5 off end # Mouse + device pnp 4e.6 off # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.7 off end # GPIO + device pnp 4e.f off end # XBUS + device pnp 4e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end # end superio + end # end pci 1.2 + device pci 1.3 off end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + device pci 3.0 on end # VGA + end + end + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end # amdfam10 + + end #domain +end + + diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/get_bus_conf.c b/src/mainboard/hp/proliant_dl165_g6_fam10/get_bus_conf.c new file mode 100644 index 0000000..099c41a --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/get_bus_conf.c @@ -0,0 +1,135 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be + installed or not You may need to preset pci1234 for HTIO board, please + refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, +}; + + +/* HT Chain device num, actually it is unit id base of every ht device + in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + + m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 12) & 0xff; + m->bus_bcm5780[0] = m->bus_bcm5785_0; + + /* bcm5785 */ + printk(BIOS_DEBUG, "search for def %d.0 on bus %d\n",sysconf.sbdn,m->bus_bcm5785_0); + dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); + if (dev) { + printk(BIOS_DEBUG, "found dev %s...\n",dev_path(dev)); + m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + printk(BIOS_DEBUG, "secondary is %d...\n",m->bus_bcm5785_1); + dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); + printk(BIOS_DEBUG, "now found %s...\n",dev_path(dev)); + if(dev) { + m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); + } + + /* bcm5780 */ + for(i = 1; i < 6; i++) { + dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); + if(dev) { + m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); + } + } + +/*I/O APICs: APIC ID Version State Address*/ + apicid_base = 0x10; + for(i=0;i<3;i++) + m->apicid_bcm5785[i] = apicid_base+i; +} diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/irq_tables.c b/src/mainboard/hp/proliant_dl165_g6_fam10/irq_tables.c new file mode 100644 index 0000000..1784aec --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/irq_tables.c @@ -0,0 +1,51 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * + * Contains the IRQ Routing Table dumped directly from your + * memory, which BIOS sets up. + * + * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx + */ + +#ifdef GETPIR +#include "pirq_routing.h" +#else +#include <arch/pirq_routing.h> +#endif + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 11, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x02 << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1166, /* Vendor */ + 0x36, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xe9, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x01, (0x0e << 3) | 0x0, {{0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}, {0x07, 0x0020}}, 0x0, 0x0}, /* 1166:024a */ + {0x00, (0x03 << 3) | 0x0, {{0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}, {0x01, 0x0400}}, 0x0, 0x0}, /* 1166:0223 */ + {0x00, (0x06 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x0, 0x0}, /* 1166:0140 */ + {0x00, (0x07 << 3) | 0x0, {{0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}, {0x23, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */ + {0x00, (0x08 << 3) | 0x0, {{0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}, {0x22, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */ + {0x00, (0x09 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x0, 0x0}, /* 1166:0142 */ + {0x00, (0x0a << 3) | 0x0, {{0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}, {0x20, 0xdac0}}, 0x0, 0x0}, /* 1166:0144 */ + {0x02, (0x02 << 3) | 0x0, {{0x28, 0xdac0}, {0x27, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 14e4:1648 */ + {0x06, (0x00 << 3) | 0x0, {{0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}, {0x21, 0xdac0}}, 0x2, 0x0}, + {0x03, (0x00 << 3) | 0x0, {{0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}, {0x24, 0xdac0}}, 0x2, 0x0}, + {0x07, (0x00 << 3) | 0x0, {{0x2a, 0xdac0}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, /* 102b:0522 */ + } +}; + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/mb_sysconf.h b/src/mainboard/hp/proliant_dl165_g6_fam10/mb_sysconf.h new file mode 100644 index 0000000..733258a --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/mb_sysconf.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_bcm5780[7]; + unsigned char bus_bcm5785_0; + unsigned char bus_bcm5785_1; + unsigned char bus_bcm5785_1_1; + unsigned apicid_bcm5785[3]; + + unsigned sbdn2; +}; + +#endif diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/mptable.c b/src/mainboard/hp/proliant_dl165_g6_fam10/mptable.c new file mode 100644 index 0000000..86f2cc6 --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/mptable.c @@ -0,0 +1,168 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.e for Uni of Mannheim + * + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-hd.de for Uni of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/io.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + struct mb_sysconf_t *m; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &isa_bus); + + /*I/O APICs: APIC ID Version State Address*/ + { + device_t dev = 0; + int i; + struct resource *res; + for(i=0; i<3; i++) { + dev = dev_find_device(0x1166, 0x0235, dev); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + printk(BIOS_DEBUG, "APIC %d base address: %x\n",m->apicid_bcm5785[i], (int)res->base); + smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); + } + } + } + + } + + /* IRQ routing as factory BIOS */ + outb(0x00, 0xc00); outb(0x09, 0xc01); + outb(0x01, 0xc00); outb(0x0a, 0xc01); + outb(0x02, 0xc00); outb(0x0e, 0xc01); + outb(0x03, 0xc00); outb(0x07, 0xc01); + outb(0x07, 0xc00); outb(0x05, 0xc01); + + // 8259 registers... + outb(0xa0, 0x4d0); + outb(0x0e, 0x4d1); + + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<30); // GEVENT14-21 used as PCI IRQ0-7 + pci_write_config32(dev, 0x64, dword); + } + // set GEVENT pins to NO OP + /* outb(0x33, 0xcd6); outb(0x00, 0xcd7); + outb(0x34, 0xcd6); outb(0x00, 0xcd7); + outb(0x35, 0xcd6); outb(0x00, 0xcd7); */ + } + + // hide XIOAPIC PCI configuration space + { + device_t dev; + dev = dev_find_device(0x1166, 0x205, 0); + if (dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x64); + dword |= (1<<26); + pci_write_config32(dev, 0x64, dword); + } + } + + mptable_add_isa_interrupts(mc, isa_bus, m->apicid_bcm5785[0], 0); + + /* I/O Ints: Type Polarity/Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0xe<<2)|0, m->apicid_bcm5785[0], 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x3<<2)|0, m->apicid_bcm5785[0], 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x6<<2)|0, m->apicid_bcm5785[2], 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x7<<2)|0, m->apicid_bcm5785[2], 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x8<<2)|0, m->apicid_bcm5785[2], 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0x9<<2)|0, m->apicid_bcm5785[2], 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (0xa<<2)|0, m->apicid_bcm5785[2], 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|0, m->apicid_bcm5785[2], 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (0x2<<2)|1, m->apicid_bcm5785[2], 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0x0<<2)|0, m->apicid_bcm5785[2], 0xa); + + /* enable int */ + /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x6c); + dword |= (1<<4); // enable interrupts + printk(BIOS_DEBUG, "6ch: %x\n",dword); + pci_write_config32(dev, 0x6c, dword); + } + } + + /* Local Ints: Type Polarity/Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + //extended table entries + smp_write_address_space(mc,0 , ADDRESS_TYPE_IO, 0x0, 0x0, 0x0, 0x0001); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x7f80, 0x0, 0x5e80); + smp_write_address_space(mc,0 , ADDRESS_TYPE_PREFETCH, 0x0, 0xde00, 0x0, 0x0100); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0xdf00, 0x0, 0x1fe0); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x1000, 0xfee0, 0xf000, 0x011f); + smp_write_address_space(mc,0 , ADDRESS_TYPE_MEM, 0x0, 0x000a, 0x0, 0x0006); + smp_write_bus_hierarchy(mc, 8, 0x01, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 0); + smp_write_compatibility_address_space(mc, 0, ADDRESS_RANGE_ADD, 1); + + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/hp/proliant_dl165_g6_fam10/romstage.c b/src/mainboard/hp/proliant_dl165_g6_fam10/romstage.c new file mode 100644 index 0000000..474190b --- /dev/null +++ b/src/mainboard/hp/proliant_dl165_g6_fam10/romstage.c @@ -0,0 +1,247 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Tyan + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. + * + * Copyright (C) 2007 University of Mannheim + * Written by Philipp Degler pdegler@rumms.uni-mannheim.de for University of Mannheim + * Copyright (C) 2009 University of Heidelberg + * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for University of Heidelberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "southbridge/broadcom/bcm5785/early_smbus.c" +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include <spd.h> +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <superio/serverengines/pilot/pilot.h> +#include "superio/nsc/pc87417/early_serial.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdfam10/debug.c" +//#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/broadcom/bcm5785/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, PILOT_SP1) +#define RTC_DEV PNP_DEV(0x4e, PC87417_RTC) + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + u8 val; + outb(0x3d, 0x0cd6); + outb(0x87, 0x0cd7); + + outb(0x44, 0xcd6); + val = inb(0xcd7); + outb((val & ~3) | ctrl->spd_switch_addr, 0xcd7); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" + +static const u8 spd_addr[] = { + // switch addr, 1A addr, 2A addr, 3A addr, 4A addr, 1B addr, 2B addr, 3B addr 4B addr + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC01, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#endif +}; + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + bcm5785_enable_lpc(); + pc87417_enable_dev(RTC_DEV); /* Enable RTC */ + } + + post_code(0x30); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pilot_early_init(SERIAL_DEV); //config port is being taken from SERIAL_DEV + + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + init_timer(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + /* It's the time to set ctrl in sysinfo now; */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + + bcm5785_early_setup(); + + post_cache_as_ram(); +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/ibm/Kconfig b/src/mainboard/ibm/Kconfig index 642bb86..b6c3cf3 100644 --- a/src/mainboard/ibm/Kconfig +++ b/src/mainboard/ibm/Kconfig @@ -3,15 +3,15 @@ if VENDOR_IBM choice prompt "Mainboard model"
-config BOARD_IBM_E325 +config BOARD_IBM_ESERVER_325 bool "eServer 325" -config BOARD_IBM_E326 +config BOARD_IBM_ESERVER_326 bool "eServer 326"
endchoice
-source "src/mainboard/ibm/e325/Kconfig" -source "src/mainboard/ibm/e326/Kconfig" +source "src/mainboard/ibm/eserver_325/Kconfig" +source "src/mainboard/ibm/eserver_326/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/ibm/e325/Kconfig b/src/mainboard/ibm/e325/Kconfig deleted file mode 100644 index 10b6fde..0000000 --- a/src/mainboard/ibm/e325/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_IBM_E325 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select SUPERIO_NSC_PC87366 - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default ibm/e325 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x1000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "eServer 325" - -config MAX_CPUS - int - default 1 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 12 - -endif # BOARD_IBM_E325 diff --git a/src/mainboard/ibm/e325/board_info.txt b/src/mainboard/ibm/e325/board_info.txt deleted file mode 100644 index 5bb0bca..0000000 --- a/src/mainboard/ibm/e325/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lnd... diff --git a/src/mainboard/ibm/e325/cmos.layout b/src/mainboard/ibm/e325/cmos.layout deleted file mode 100644 index d8e2eee..0000000 --- a/src/mainboard/ibm/e325/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/ibm/e325/devicetree.cb b/src/mainboard/ibm/e325/devicetree.cb deleted file mode 100644 index bdaee50..0000000 --- a/src/mainboard/ibm/e325/devicetree.cb +++ /dev/null @@ -1,70 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - device domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT 0 - device pci 18.0 on # LDT 1 - chip southbridge/amd/amd8131 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/nsc/pc87366 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 off end - device pci 1.6 off end - end - end # device pci 18.0 - device pci 18.0 on end # LDT2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end - diff --git a/src/mainboard/ibm/e325/irq_tables.c b/src/mainboard/ibm/e325/irq_tables.c deleted file mode 100644 index 24987b7..0000000 --- a/src/mainboard/ibm/e325/irq_tables.c +++ /dev/null @@ -1,60 +0,0 @@ -#include <arch/pirq_routing.h> -#include <device/pci.h> - -#define IRQ_ROUTER_BUS 0 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x746b - -#define AVAILABLE_IRQS 0xdef8 -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ - {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} - -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT table entries */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x34, /* u8 checksum , mod 256 checksum must give zero */ - { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - /* Northbridge, Node 0 */ - IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), - /* Onboard LSI SCSI Controller */ - IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), - /* Onboard Broadcom NICs */ - IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), - /* PCI Slot 1-2 */ - IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), - IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), - /* AMD-8111 PCI Bridge */ - IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), - /* USB Controller */ - IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), - /* ATI Rage XL VGA */ - IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), - /* AMD-8111 LPC Dridge */ - IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), - /* Northbridge, Node 1 */ - IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), - - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/ibm/e325/mptable.c b/src/mainboard/ibm/e325/mptable.c deleted file mode 100644 index 6eb6390..0000000 --- a/src/mainboard/ibm/e325/mptable.c +++ /dev/null @@ -1,131 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int bus_isa; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); - bus_8111_0 = 1; - bus_8111_1 = 4; - } - - /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - bus_8131_1 = 2; - } - - /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8131_2 = 3; - } - } - - mptable_write_buses(mc, NULL, &bus_isa); - - /* Legacy IOAPIC #2 */ - smp_write_ioapic(mc, 2, 0x11, IO_APIC_ADDR); - { - device_t dev; - struct resource *res; - /* 8131-1 apic #3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x03, 0x11, res->base); - } - } - /* 8131-2 apic #4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x04, 0x11, res->base); - } - } - } - - mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); - - /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ - /* Integrated SMBus 2.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); - /* Integrated AMD AC97 Audio */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); - - /* Integrated AMD USB */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); - - /* On board ATI Rage XL */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); - - /* On board Broadcom nics */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); - - /* On board LSI SCSI */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); - - /* PCI Slot 1 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); - - /* PCI Slot 2 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); - - /* Standard local interrupt assignments: - * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/ibm/e325/resourcemap.c b/src/mainboard/ibm/e325/resourcemap.c deleted file mode 100644 index 85aafbf..0000000 --- a/src/mainboard/ibm/e325/resourcemap.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * IBM E325 needs a different resource map - * - */ - -static void setup_ibm_e325_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - - PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10, - PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003, - //PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0, - // PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010, - PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003, - //PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10, - PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03, - //PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010, - PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003, - //PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0, - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010, - PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33, - PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0, - PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0, - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/ibm/e325/romstage.c b/src/mainboard/ibm/e325/romstage.c deleted file mode 100644 index b44668a..0000000 --- a/src/mainboard/ibm/e325/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/nsc/pc87366/early_serial.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include "southbridge/amd/amd8111/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "resourcemap.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { DIMM0, DIMM2, 0, 0 }, - .channel1 = { DIMM1, DIMM3, 0, 0 }, - }, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { DIMM4, DIMM6, 0, 0 }, - .channel1 = { DIMM5, DIMM7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) - init_cpus(cpu_init_detectedx); - - pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ibm_e325_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - - post_cache_as_ram(); -} diff --git a/src/mainboard/ibm/e326/Kconfig b/src/mainboard/ibm/e326/Kconfig deleted file mode 100644 index 005012a..0000000 --- a/src/mainboard/ibm/e326/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_IBM_E326 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_AMD8111 - select SOUTHBRIDGE_AMD_AMD8131 - select SUPERIO_NSC_PC87366 - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default ibm/e326 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x1000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "eServer 326" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 12 - -endif # BOARD_IBM_E326 diff --git a/src/mainboard/ibm/e326/board_info.txt b/src/mainboard/ibm/e326/board_info.txt deleted file mode 100644 index af5631e..0000000 --- a/src/mainboard/ibm/e326/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lnd... diff --git a/src/mainboard/ibm/e326/cmos.layout b/src/mainboard/ibm/e326/cmos.layout deleted file mode 100644 index d8e2eee..0000000 --- a/src/mainboard/ibm/e326/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/ibm/e326/devicetree.cb b/src/mainboard/ibm/e326/devicetree.cb deleted file mode 100644 index 1888987..0000000 --- a/src/mainboard/ibm/e326/devicetree.cb +++ /dev/null @@ -1,74 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_940 - device lapic 0 on end - end - end - - device domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on end # LDT 0 - device pci 18.0 on # LDT 1 - chip southbridge/amd/amd8131 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on end - device pci 1.0 off end - device pci 5.0 on end # ATI Rage XL - end - device pci 1.0 on - chip superio/nsc/pc87366 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.8 off end # ACB - device pnp 2e.9 off end # FSCM - device pnp 2e.a off end # WDT - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on end - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - device pci 18.0 on end # LDT2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end - diff --git a/src/mainboard/ibm/e326/irq_tables.c b/src/mainboard/ibm/e326/irq_tables.c deleted file mode 100644 index 24987b7..0000000 --- a/src/mainboard/ibm/e326/irq_tables.c +++ /dev/null @@ -1,60 +0,0 @@ -#include <arch/pirq_routing.h> -#include <device/pci.h> - -#define IRQ_ROUTER_BUS 0 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x746b - -#define AVAILABLE_IRQS 0xdef8 -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ - {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} - -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT table entries */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x34, /* u8 checksum , mod 256 checksum must give zero */ - { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - /* Northbridge, Node 0 */ - IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), - /* Onboard LSI SCSI Controller */ - IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), - /* Onboard Broadcom NICs */ - IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), - /* AMD-8131 PCI-X Bridge */ - IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), - /* PCI Slot 1-2 */ - IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), - IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), - /* AMD-8111 PCI Bridge */ - IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), - /* USB Controller */ - IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), - /* ATI Rage XL VGA */ - IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), - /* AMD-8111 LPC Dridge */ - IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), - /* Northbridge, Node 1 */ - IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), - - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/ibm/e326/mptable.c b/src/mainboard/ibm/e326/mptable.c deleted file mode 100644 index f271166..0000000 --- a/src/mainboard/ibm/e326/mptable.c +++ /dev/null @@ -1,130 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int bus_isa; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); - bus_8111_0 = 1; - bus_8111_1 = 4; - } - - /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); - bus_8131_1 = 2; - } - - /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8131_2 = 3; - } - } - - mptable_write_buses(mc, NULL, &bus_isa); - - /* Legacy IOAPIC #2 */ - smp_write_ioapic(mc, 2, 0x11, IO_APIC_ADDR); - { - device_t dev; - struct resource *res; - /* 8131-1 apic #3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x03, 0x11, res->base); - } - } - /* 8131-2 apic #4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x04, 0x11, res->base); - } - } - } - - mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); - - /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ - /* Integrated SMBus 2.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); - /* Integrated AMD AC97 Audio */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); - - /* Integrated AMD USB */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); - - /* On board ATI Rage XL */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); - - /* On board Broadcom nics */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); - - /* On board LSI SCSI */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); - - /* PCI Slot 1 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); - - /* PCI Slot 2 PCIX */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); - - /* Standard local interrupt assignments: - * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/ibm/e326/resourcemap.c b/src/mainboard/ibm/e326/resourcemap.c deleted file mode 100644 index 98fdcc0..0000000 --- a/src/mainboard/ibm/e326/resourcemap.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * IBM E325 needs a different resource map - * - */ - -static void setup_ibm_e326_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - - PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10, - PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003, - //PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0, - // PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010, - PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003, - //PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10, - PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03, - //PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010, - PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003, - //PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0, - //PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0, - - PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0, - PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0, - PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0, - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010, - PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33, - PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0, - PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0, - PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0, - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0, - }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/ibm/e326/romstage.c b/src/mainboard/ibm/e326/romstage.c deleted file mode 100644 index c703b7a..0000000 --- a/src/mainboard/ibm/e326/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <stdlib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/amd/amd8111/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/nsc/pc87366/early_serial.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/amd8111/early_ctrl.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) - -static void memreset_setup(void) -{ - if (is_cpu_pre_c0()) { - /* Set the memreset low. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); - /* Ensure the BIOS has control of the memory lines. */ - outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - } else { - /* Ensure the CPU has control of the memory lines. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); - } -} - -static void memreset(int controllers, const struct mem_controller *ctrl) -{ - if (is_cpu_pre_c0()) { - udelay(800); - /* Set memreset high. */ - outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); - udelay(90); - } -} - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "resourcemap.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { DIMM0, DIMM2, 0, 0 }, - .channel1 = { DIMM1, DIMM3, 0, 0 }, - }, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { DIMM4, DIMM6, 0, 0 }, - .channel1 = { DIMM5, DIMM7, 0, 0 }, - }, -#endif - }; - - int needs_reset; - - if (bist == 0) - init_cpus(cpu_init_detectedx); - - pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ibm_e326_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - // automatically set that for you, but you might meet tight space - needs_reset |= ht_setup_chains_x(); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - enable_smbus(); - - memreset_setup(); - sdram_initialize(ARRAY_SIZE(cpu), cpu); - - post_cache_as_ram(); -} diff --git a/src/mainboard/ibm/eserver_325/Kconfig b/src/mainboard/ibm/eserver_325/Kconfig new file mode 100644 index 0000000..099efb3 --- /dev/null +++ b/src/mainboard/ibm/eserver_325/Kconfig @@ -0,0 +1,62 @@ +if BOARD_IBM_ESERVER_325 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_940 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_AMD8111 + select SOUTHBRIDGE_AMD_AMD8131 + select SUPERIO_NSC_PC87366 + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default ibm/eserver_325 + +config DCACHE_RAM_BASE + hex + default 0xcf000 + +config DCACHE_RAM_SIZE + hex + default 0x1000 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "eServer 325" + +config MAX_CPUS + int + default 1 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + +config IRQ_SLOT_COUNT + int + default 12 + +endif # BOARD_IBM_ESERVER_325 diff --git a/src/mainboard/ibm/eserver_325/board_info.txt b/src/mainboard/ibm/eserver_325/board_info.txt new file mode 100644 index 0000000..5bb0bca --- /dev/null +++ b/src/mainboard/ibm/eserver_325/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lnd... diff --git a/src/mainboard/ibm/eserver_325/cmos.layout b/src/mainboard/ibm/eserver_325/cmos.layout new file mode 100644 index 0000000..d8e2eee --- /dev/null +++ b/src/mainboard/ibm/eserver_325/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/ibm/eserver_325/devicetree.cb b/src/mainboard/ibm/eserver_325/devicetree.cb new file mode 100644 index 0000000..bdaee50 --- /dev/null +++ b/src/mainboard/ibm/eserver_325/devicetree.cb @@ -0,0 +1,70 @@ +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end + device domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/nsc/pc87366 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + end + end # device pci 18.0 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/ibm/eserver_325/irq_tables.c b/src/mainboard/ibm/eserver_325/irq_tables.c new file mode 100644 index 0000000..24987b7 --- /dev/null +++ b/src/mainboard/ibm/eserver_325/irq_tables.c @@ -0,0 +1,60 @@ +#include <arch/pirq_routing.h> +#include <device/pci.h> + +#define IRQ_ROUTER_BUS 0 +#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) +#define IRQ_ROUTER_VENDOR 0x1022 +#define IRQ_ROUTER_DEVICE 0x746b + +#define AVAILABLE_IRQS 0xdef8 +#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ + { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ + {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} + +/* Each IRQ_SLOT entry consists of: + * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu + */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT table entries */ + IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ + IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + IRQ_ROUTER_VENDOR, /* Vendor */ + IRQ_ROUTER_DEVICE, /* Device */ + 0x00, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x34, /* u8 checksum , mod 256 checksum must give zero */ + { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ + /* Northbridge, Node 0 */ + IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), + /* Onboard LSI SCSI Controller */ + IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), + /* Onboard Broadcom NICs */ + IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), + /* PCI Slot 1-2 */ + IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), + IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), + /* AMD-8111 PCI Bridge */ + IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), + /* USB Controller */ + IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), + /* ATI Rage XL VGA */ + IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), + /* AMD-8111 LPC Dridge */ + IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), + /* Northbridge, Node 1 */ + IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), + + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/ibm/eserver_325/mptable.c b/src/mainboard/ibm/eserver_325/mptable.c new file mode 100644 index 0000000..6eb6390 --- /dev/null +++ b/src/mainboard/ibm/eserver_325/mptable.c @@ -0,0 +1,131 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + + int bus_isa; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); + bus_8111_0 = 1; + bus_8111_1 = 4; + } + + /* 8131-1 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); + bus_8131_1 = 2; + } + + /* 8131-2 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); + bus_8131_2 = 3; + } + } + + mptable_write_buses(mc, NULL, &bus_isa); + + /* Legacy IOAPIC #2 */ + smp_write_ioapic(mc, 2, 0x11, IO_APIC_ADDR); + { + device_t dev; + struct resource *res; + /* 8131-1 apic #3 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } + } + /* 8131-2 apic #4 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } + } + } + + mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); + + /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ + /* Integrated SMBus 2.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); + /* Integrated AMD AC97 Audio */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); + + /* Integrated AMD USB */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); + + /* On board ATI Rage XL */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); + + /* On board Broadcom nics */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); + + /* On board LSI SCSI */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); + + /* PCI Slot 1 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); + + /* PCI Slot 2 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); + + /* Standard local interrupt assignments: + * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/ibm/eserver_325/resourcemap.c b/src/mainboard/ibm/eserver_325/resourcemap.c new file mode 100644 index 0000000..85aafbf --- /dev/null +++ b/src/mainboard/ibm/eserver_325/resourcemap.c @@ -0,0 +1,271 @@ +/* + * IBM E325 needs a different resource map + * + */ + +static void setup_ibm_e325_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + + PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10, + PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003, + //PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0, + // PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010, + PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003, + //PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10, + PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03, + //PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010, + PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003, + //PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0, + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010, + PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33, + PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0, + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103, + PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0, + }; + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/ibm/eserver_325/romstage.c b/src/mainboard/ibm/eserver_325/romstage.c new file mode 100644 index 0000000..b44668a --- /dev/null +++ b/src/mainboard/ibm/eserver_325/romstage.c @@ -0,0 +1,119 @@ +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <stdlib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/nsc/pc87366/early_serial.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <spd.h> +#include "southbridge/amd/amd8111/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); + /* Ensure the BIOS has control of the memory lines. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } else { + /* Ensure the CPU has control of the memory lines. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset high. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); + udelay(90); + } +} + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const struct mem_controller cpu[] = { + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { DIMM0, DIMM2, 0, 0 }, + .channel1 = { DIMM1, DIMM3, 0, 0 }, + }, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { DIMM4, DIMM6, 0, 0 }, + .channel1 = { DIMM5, DIMM7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + + if (bist == 0) + init_cpus(cpu_init_detectedx); + + pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_ibm_e325_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(ARRAY_SIZE(cpu), cpu); + + post_cache_as_ram(); +} diff --git a/src/mainboard/ibm/eserver_326/Kconfig b/src/mainboard/ibm/eserver_326/Kconfig new file mode 100644 index 0000000..2b92c6c --- /dev/null +++ b/src/mainboard/ibm/eserver_326/Kconfig @@ -0,0 +1,62 @@ +if BOARD_IBM_ESERVER_326 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_940 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_AMD8111 + select SOUTHBRIDGE_AMD_AMD8131 + select SUPERIO_NSC_PC87366 + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default ibm/eserver_326 + +config DCACHE_RAM_BASE + hex + default 0xcf000 + +config DCACHE_RAM_SIZE + hex + default 0x1000 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "eServer 326" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + +config IRQ_SLOT_COUNT + int + default 12 + +endif # BOARD_IBM_ESERVER_326 diff --git a/src/mainboard/ibm/eserver_326/board_info.txt b/src/mainboard/ibm/eserver_326/board_info.txt new file mode 100644 index 0000000..af5631e --- /dev/null +++ b/src/mainboard/ibm/eserver_326/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=ibm&lnd... diff --git a/src/mainboard/ibm/eserver_326/cmos.layout b/src/mainboard/ibm/eserver_326/cmos.layout new file mode 100644 index 0000000..d8e2eee --- /dev/null +++ b/src/mainboard/ibm/eserver_326/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/ibm/eserver_326/devicetree.cb b/src/mainboard/ibm/eserver_326/devicetree.cb new file mode 100644 index 0000000..1888987 --- /dev/null +++ b/src/mainboard/ibm/eserver_326/devicetree.cb @@ -0,0 +1,74 @@ +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_940 + device lapic 0 on end + end + end + + device domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + device pci 5.0 on end # ATI Rage XL + end + device pci 1.0 on + chip superio/nsc/pc87366 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end # device pci 18.0 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end + diff --git a/src/mainboard/ibm/eserver_326/irq_tables.c b/src/mainboard/ibm/eserver_326/irq_tables.c new file mode 100644 index 0000000..24987b7 --- /dev/null +++ b/src/mainboard/ibm/eserver_326/irq_tables.c @@ -0,0 +1,60 @@ +#include <arch/pirq_routing.h> +#include <device/pci.h> + +#define IRQ_ROUTER_BUS 0 +#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) +#define IRQ_ROUTER_VENDOR 0x1022 +#define IRQ_ROUTER_DEVICE 0x746b + +#define AVAILABLE_IRQS 0xdef8 +#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ + { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ + {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} + +/* Each IRQ_SLOT entry consists of: + * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu + */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT table entries */ + IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ + IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + IRQ_ROUTER_VENDOR, /* Vendor */ + IRQ_ROUTER_DEVICE, /* Device */ + 0x00, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x34, /* u8 checksum , mod 256 checksum must give zero */ + { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ + /* Northbridge, Node 0 */ + IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), + /* Onboard LSI SCSI Controller */ + IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), + /* Onboard Broadcom NICs */ + IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), + /* PCI Slot 1-2 */ + IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), + IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), + /* AMD-8111 PCI Bridge */ + IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), + /* USB Controller */ + IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), + /* ATI Rage XL VGA */ + IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), + /* AMD-8111 LPC Dridge */ + IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), + /* Northbridge, Node 1 */ + IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), + + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/ibm/eserver_326/mptable.c b/src/mainboard/ibm/eserver_326/mptable.c new file mode 100644 index 0000000..f271166 --- /dev/null +++ b/src/mainboard/ibm/eserver_326/mptable.c @@ -0,0 +1,130 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + + int bus_isa; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); + bus_8111_0 = 1; + bus_8111_1 = 4; + } + + /* 8131-1 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); + bus_8131_1 = 2; + } + + /* 8131-2 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); + bus_8131_2 = 3; + } + } + + mptable_write_buses(mc, NULL, &bus_isa); + + /* Legacy IOAPIC #2 */ + smp_write_ioapic(mc, 2, 0x11, IO_APIC_ADDR); + { + device_t dev; + struct resource *res; + /* 8131-1 apic #3 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } + } + /* 8131-2 apic #4 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } + } + } + + mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); + + /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ + /* Integrated SMBus 2.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); + /* Integrated AMD AC97 Audio */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); + + /* Integrated AMD USB */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); + + /* On board ATI Rage XL */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); + + /* On board Broadcom nics */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); + + /* On board LSI SCSI */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); + + /* PCI Slot 1 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); + + /* PCI Slot 2 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); + + /* Standard local interrupt assignments: + * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/ibm/eserver_326/resourcemap.c b/src/mainboard/ibm/eserver_326/resourcemap.c new file mode 100644 index 0000000..98fdcc0 --- /dev/null +++ b/src/mainboard/ibm/eserver_326/resourcemap.c @@ -0,0 +1,271 @@ +/* + * IBM E325 needs a different resource map + * + */ + +static void setup_ibm_e326_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + + PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10, + PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003, + //PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0, + // PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010, + PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003, + //PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10, + PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03, + //PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010, + PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003, + //PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0, + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010, + PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33, + PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0, + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103, + PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0, + }; + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/ibm/eserver_326/romstage.c b/src/mainboard/ibm/eserver_326/romstage.c new file mode 100644 index 0000000..c703b7a --- /dev/null +++ b/src/mainboard/ibm/eserver_326/romstage.c @@ -0,0 +1,119 @@ +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <stdlib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/nsc/pc87366/early_serial.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/amd/amd8111/early_ctrl.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); + /* Ensure the BIOS has control of the memory lines. */ + outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } else { + /* Ensure the CPU has control of the memory lines. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset high. */ + outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); + udelay(90); + } +} + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "resourcemap.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const struct mem_controller cpu[] = { + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { DIMM0, DIMM2, 0, 0 }, + .channel1 = { DIMM1, DIMM3, 0, 0 }, + }, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { DIMM4, DIMM6, 0, 0 }, + .channel1 = { DIMM5, DIMM7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + + if (bist == 0) + init_cpus(cpu_init_detectedx); + + pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_ibm_e326_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); +#endif + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + enable_smbus(); + + memreset_setup(); + sdram_initialize(ARRAY_SIZE(cpu), cpu); + + post_cache_as_ram(); +} diff --git a/src/mainboard/iei/Kconfig b/src/mainboard/iei/Kconfig index 014626a..a0b0444 100644 --- a/src/mainboard/iei/Kconfig +++ b/src/mainboard/iei/Kconfig @@ -38,13 +38,13 @@ config BOARD_IEI_PM_LX2_800_R10
endchoice
-source "src/mainboard/iei/juki-511p/Kconfig" -source "src/mainboard/iei/rocky-512/Kconfig" -source "src/mainboard/iei/kino-780am2-fam10/Kconfig" -source "src/mainboard/iei/nova4899r/Kconfig" -source "src/mainboard/iei/pcisa-lx-800-r10/Kconfig" -source "src/mainboard/iei/pm-lx-800-r11/Kconfig" -source "src/mainboard/iei/pm-lx2-800-r10/Kconfig" +source "src/mainboard/iei/juki_511p/Kconfig" +source "src/mainboard/iei/rocky_512/Kconfig" +source "src/mainboard/iei/kino_780am2fam10/Kconfig" +source "src/mainboard/iei/nova_4899r/Kconfig" +source "src/mainboard/iei/pcisa_lx_800_r10/Kconfig" +source "src/mainboard/iei/pm_lx_800_r11/Kconfig" +source "src/mainboard/iei/pm_lx2_800_r10/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/iei/juki-511p/Kconfig b/src/mainboard/iei/juki-511p/Kconfig deleted file mode 100644 index 0aebb03..0000000 --- a/src/mainboard/iei/juki-511p/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977F - select ROMCC - select PIRQ_ROUTE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default iei/juki-511p - -if BOARD_IEI_JUKI_511P -config MAINBOARD_PART_NUMBER - string - default "JUKI-511P" -endif # BOARD_IEI_JUKI_511P - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 diff --git a/src/mainboard/iei/juki-511p/board_info.txt b/src/mainboard/iei/juki-511p/board_info.txt deleted file mode 100644 index 3445599..0000000 --- a/src/mainboard/iei/juki-511p/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/news_content.asp?id=erbium/projectOBJ00150613 diff --git a/src/mainboard/iei/juki-511p/cmos.layout b/src/mainboard/iei/juki-511p/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/iei/juki-511p/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/iei/juki-511p/devicetree.cb b/src/mainboard/iei/juki-511p/devicetree.cb deleted file mode 100644 index 4706ff5..0000000 --- a/src/mainboard/iei/juki-511p/devicetree.cb +++ /dev/null @@ -1,57 +0,0 @@ -chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - - device pci 12.0 on - chip superio/winbond/w83977f - device pnp 3f0.0 on # FDC - irq 0x70 = 6 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.4 on # RTC - io 0x60 = 0x070 - irq 0x70 = 8 - end - device pnp 3f0.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Int 1 for PS/2 keyboard - irq 0x72 = 12 # Int 12 for PS/2 mouse - end - device pnp 3f0.6 off # IR - end - device pnp 3f0.7 off # GPIO1 - end - device pnp 3f0.8 off # GPIO - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA onboard - - end - - device pci 0e.0 on end # ETH0 - device pci 13.0 on end # USB - - end - end - - chip cpu/amd/geode_gx1 - end - -end - diff --git a/src/mainboard/iei/juki-511p/irq_tables.c b/src/mainboard/iei/juki-511p/irq_tables.c deleted file mode 100644 index 7d8e800..0000000 --- a/src/mainboard/iei/juki-511p/irq_tables.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */ -#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */ -#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */ -#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x57, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - - .slots = { - [0] = { - .slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */ - .bus = 0x00, - .devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ - .bitmap = IRQ_BITMAP_LINK3 - } - } - }, - - [1] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ - .bitmap = IRQ_BITMAP_LINK0 - } - } - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param addr Destination address (between 0xF0000...0x100000). - * @return The end address of the pirq routing table in memory. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/juki-511p/romstage.c b/src/mainboard/iei/juki-511p/romstage.c deleted file mode 100644 index 1b8e952..0000000 --- a/src/mainboard/iei/juki-511p/romstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "superio/winbond/w83977f/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "northbridge/amd/gx1/raminit.c" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - /* Disable Watchdog Timer. */ - inb(0x043); - inb(0x843); - - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/iei/juki_511p/Kconfig b/src/mainboard/iei/juki_511p/Kconfig new file mode 100644 index 0000000..2734865 --- /dev/null +++ b/src/mainboard/iei/juki_511p/Kconfig @@ -0,0 +1,47 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_GX1 + select NORTHBRIDGE_AMD_GX1 + select SOUTHBRIDGE_AMD_CS5530 + select SUPERIO_WINBOND_W83977F + select ROMCC + select PIRQ_ROUTE + select HAVE_PIRQ_TABLE + select HAVE_OPTION_TABLE + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default iei/juki_511p + +if BOARD_IEI_JUKI_511P +config MAINBOARD_PART_NUMBER + string + default "JUKI-511P" +endif # BOARD_IEI_JUKI_511P + +config IRQ_SLOT_COUNT + int + default 2 + +endif # BOARD_IEI_JUKI_511P || BOARD_IEI_ROCKY_512 diff --git a/src/mainboard/iei/juki_511p/board_info.txt b/src/mainboard/iei/juki_511p/board_info.txt new file mode 100644 index 0000000..3445599 --- /dev/null +++ b/src/mainboard/iei/juki_511p/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.ieiworld.com/en/news_content.asp?id=erbium/projectOBJ00150613 diff --git a/src/mainboard/iei/juki_511p/cmos.layout b/src/mainboard/iei/juki_511p/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/iei/juki_511p/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/iei/juki_511p/devicetree.cb b/src/mainboard/iei/juki_511p/devicetree.cb new file mode 100644 index 0000000..4706ff5 --- /dev/null +++ b/src/mainboard/iei/juki_511p/devicetree.cb @@ -0,0 +1,57 @@ +chip northbridge/amd/gx1 + device domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + + device pci 12.0 on + chip superio/winbond/w83977f + device pnp 3f0.0 on # FDC + irq 0x70 = 6 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.4 on # RTC + io 0x60 = 0x070 + irq 0x70 = 8 + end + device pnp 3f0.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Int 1 for PS/2 keyboard + irq 0x72 = 12 # Int 12 for PS/2 mouse + end + device pnp 3f0.6 off # IR + end + device pnp 3f0.7 off # GPIO1 + end + device pnp 3f0.8 off # GPIO + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA onboard + + end + + device pci 0e.0 on end # ETH0 + device pci 13.0 on end # USB + + end + end + + chip cpu/amd/geode_gx1 + end + +end + diff --git a/src/mainboard/iei/juki_511p/irq_tables.c b/src/mainboard/iei/juki_511p/irq_tables.c new file mode 100644 index 0000000..7d8e800 --- /dev/null +++ b/src/mainboard/iei/juki_511p/irq_tables.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +#define IRQ_BITMAP_LINK0 0x0800 /* chipset's INTA# input should be routed to IRQ11 */ +#define IRQ_BITMAP_LINK1 0x0400 /* chipset's INTB# input should be routed to IRQ10 */ +#define IRQ_BITMAP_LINK2 0x0000 /* chipset's INTC# input should be routed to nothing (disabled) */ +#define IRQ_BITMAP_LINK3 0x0000 /* chipset's INTD# input should be routed to nothing (disabled) */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be a total of CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x1078, /* Vendor */ + 0x2, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x57, /* u8 checksum. This has to be set to some + value that would give 0 after the sum of all + bytes for this structure (including checksum) */ + + .slots = { + [0] = { + .slot = 0x0, /* should be 0 when it is no real slot. My device is soldered */ + .bus = 0x00, + .devfn = (0x13<<3)|0x0, /* 0x13 is my USB OHCI */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ + .bitmap = IRQ_BITMAP_LINK0 + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ + .bitmap = IRQ_BITMAP_LINK1 + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ + .bitmap = IRQ_BITMAP_LINK2 + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ + .bitmap = IRQ_BITMAP_LINK3 + } + } + }, + + [1] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x0e<<3)|0x0, /* 0x0e is my Realtek Network device */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = 0x02, /* 0x02 means its connected to INTB# input at chipset */ + .bitmap = IRQ_BITMAP_LINK1 + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = 0x03, /* 0x03 means its connected to INTC# input at chipset */ + .bitmap = IRQ_BITMAP_LINK2 + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = 0x04, /* 0x04 means its connected to INTD# input at chipset */ + .bitmap = IRQ_BITMAP_LINK3 + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = 0x01, /* 0x01 means its connected to INTA# input at chipset */ + .bitmap = IRQ_BITMAP_LINK0 + } + } + } + } +}; + +/** + * Copy the IRQ routing table to memory. + * + * @param addr Destination address (between 0xF0000...0x100000). + * @return The end address of the pirq routing table in memory. + */ +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iei/juki_511p/romstage.c b/src/mainboard/iei/juki_511p/romstage.c new file mode 100644 index 0000000..1b8e952 --- /dev/null +++ b/src/mainboard/iei/juki_511p/romstage.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "superio/winbond/w83977f/early_serial.c" +#include "southbridge/amd/cs5530/enable_rom.c" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "northbridge/amd/gx1/raminit.c" + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977F_SP1) + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + w83977f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + /* Disable Watchdog Timer. */ + inb(0x043); + inb(0x843); + + cs5530_enable_rom(); + sdram_init(); +} diff --git a/src/mainboard/iei/kino-780am2-fam10/Kconfig b/src/mainboard/iei/kino-780am2-fam10/Kconfig deleted file mode 100644 index 08c49a3..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/Kconfig +++ /dev/null @@ -1,80 +0,0 @@ -if BOARD_IEI_KINO_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2R2 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_FINTEK_F71859 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default iei/kino-780am2-fam10 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "Kino-780AM2(Fam10)" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_01000086.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config VGA_BIOS_ID - string - default "1002,9615" - -endif #BOARD_IEI_KINO_FAM10 diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi/cpstate.asl b/src/mainboard/iei/kino-780am2-fam10/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi/ide.asl b/src/mainboard/iei/kino-780am2-fam10/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi/routing.asl b/src/mainboard/iei/kino-780am2-fam10/acpi/routing.asl deleted file mode 100644 index fa366d8..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi/routing.asl +++ /dev/null @@ -1,337 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTG, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0012FFFF, 2, INTC, 0 }, - Package(){0x0012FFFF, 3, INTD, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTD, 0 }, - Package(){0x0013FFFF, 2, INTA, 0 }, - Package(){0x0013FFFF, 3, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - -/* Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, -*/ - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0012FFFF, 2, 0, 18 }, - Package(){0x0012FFFF, 3, 0, 19 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0013FFFF, 2, 0, 16 }, - Package(){0x0013FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTC, 0 }, - Package(){0x0005FFFF, 1, INTD, 0 }, - Package(){0x0005FFFF, 2, INTA, 0 }, - Package(){0x0005FFFF, 3, INTB, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - Package(){0x0005FFFF, 2, 0, 16 }, - Package(){0x0005FFFF, 3, 0, 17 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi/sata.asl b/src/mainboard/iei/kino-780am2-fam10/acpi/sata.asl deleted file mode 100644 index 723b4aa..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi/usb.asl b/src/mainboard/iei/kino-780am2-fam10/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/iei/kino-780am2-fam10/acpi_tables.c b/src/mainboard/iei/kino-780am2-fam10/acpi_tables.c deleted file mode 100644 index 5efb0ee..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/acpi_tables.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010-2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - - /* TODO: More HT and other tables need to go into this table generation. - * This should also be moved out to the silicon level if it can. - */ - - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot PSTATE/TOM SSDT at %lx\n", current); - ssdt = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/iei/kino-780am2-fam10/board_info.txt b/src/mainboard/iei/kino-780am2-fam10/board_info.txt deleted file mode 100644 index 8265642..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Kino-780AM2 -Category: half -Board URL: http://web.archive.org/web/20111208234719/http://ieiworld.com/product_groups... -ROM protocol: SPI diff --git a/src/mainboard/iei/kino-780am2-fam10/cmos.layout b/src/mainboard/iei/kino-780am2-fam10/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/iei/kino-780am2-fam10/devicetree.cb b/src/mainboard/iei/kino-780am2-fam10/devicetree.cb deleted file mode 100644 index d5c7033..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/devicetree.cb +++ /dev/null @@ -1,71 +0,0 @@ -# Config for iei/kino-780am2-fam10 -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2r2 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 on end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "1" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71859 - device pnp 2e.3 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - end #SIO - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end #domain -end #root_complex - diff --git a/src/mainboard/iei/kino-780am2-fam10/dsdt.asl b/src/mainboard/iei/kino-780am2-fam10/dsdt.asl deleted file mode 100644 index b5a6faf..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/dsdt.asl +++ /dev/null @@ -1,1868 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "IEI ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 /* defined by HPET table? */ - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* f71859 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ -#if 0 - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c b/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/iei/kino-780am2-fam10/irq_tables.c b/src/mainboard/iei/kino-780am2-fam10/irq_tables.c deleted file mode 100644 index 87c414a..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/iei/kino-780am2-fam10/mainboard.c b/src/mainboard/iei/kino-780am2-fam10/mainboard.c deleted file mode 100644 index 43ff9c1..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/mainboard.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); -/* TODO - Need to find GPIO for PCIE slot. - * Kino uses GPIO ? as PCIe slot reset, GPIO? as GFX slot reset. We need to - * pull it up before training the slot. - ***/ -void set_pcie_dereset() -{ - /* PCIE slot not yet supported.*/ -} - -void set_pcie_reset() -{ - /* PCIE slot not yet supported.*/ -} - -u8 is_dev3_present(void) -{ - return 0; -} - -/************************************************* -* enable the dedicated function in kino board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard Kino Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/iei/kino-780am2-fam10/mb_sysconf.h b/src/mainboard/iei/kino-780am2-fam10/mb_sysconf.h deleted file mode 100644 index 25d63d5..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/mb_sysconf.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - u8 bus_isa; - u8 bus_8132_0; - u8 bus_8132_1; - u8 bus_8132_2; - u8 bus_8111_0; - u8 bus_8111_1; - u8 bus_8132a[31][3]; - u8 bus_8151[31][2]; - - u32 apicid_8111; - u32 apicid_8132_1; - u32 apicid_8132_2; - u32 apicid_8132a[31][2]; - u32 sbdn3; - u32 sbdn3a[31]; - u32 sbdn5[31]; -}; - -#endif diff --git a/src/mainboard/iei/kino-780am2-fam10/mptable.c b/src/mainboard/iei/kino-780am2-fam10/mptable.c deleted file mode 100644 index 11426c2..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/iei/kino-780am2-fam10/resourcemap.c b/src/mainboard/iei/kino-780am2-fam10/resourcemap.c deleted file mode 100644 index fc92f62..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/resourcemap.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/iei/kino-780am2-fam10/romstage.c b/src/mainboard/iei/kino-780am2-fam10/romstage.c deleted file mode 100644 index e1230e5..0000000 --- a/src/mainboard/iei/kino-780am2-fam10/romstage.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f71859/f71859.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - - #if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); - #endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - #if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - #endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - - return 0; -} diff --git a/src/mainboard/iei/kino_780am2fam10/Kconfig b/src/mainboard/iei/kino_780am2fam10/Kconfig new file mode 100644 index 0000000..57c3123 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/Kconfig @@ -0,0 +1,80 @@ +if BOARD_IEI_KINO_FAM10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2R2 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_FINTEK_F71859 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default iei/kino_780am2fam10 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "Kino-780AM2(Fam10)" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_01000086.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config VGA_BIOS_ID + string + default "1002,9615" + +endif #BOARD_IEI_KINO_FAM10 diff --git a/src/mainboard/iei/kino_780am2fam10/acpi/cpstate.asl b/src/mainboard/iei/kino_780am2fam10/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/iei/kino_780am2fam10/acpi/ide.asl b/src/mainboard/iei/kino_780am2fam10/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/iei/kino_780am2fam10/acpi/routing.asl b/src/mainboard/iei/kino_780am2fam10/acpi/routing.asl new file mode 100644 index 0000000..fa366d8 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi/routing.asl @@ -0,0 +1,337 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTG, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0012FFFF, 2, INTC, 0 }, + Package(){0x0012FFFF, 3, INTD, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTD, 0 }, + Package(){0x0013FFFF, 2, INTA, 0 }, + Package(){0x0013FFFF, 3, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + +/* Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, +*/ + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0012FFFF, 2, 0, 18 }, + Package(){0x0012FFFF, 3, 0, 19 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0013FFFF, 2, 0, 16 }, + Package(){0x0013FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTC, 0 }, + Package(){0x0005FFFF, 1, INTD, 0 }, + Package(){0x0005FFFF, 2, INTA, 0 }, + Package(){0x0005FFFF, 3, INTB, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + Package(){0x0005FFFF, 2, 0, 16 }, + Package(){0x0005FFFF, 3, 0, 17 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/iei/kino_780am2fam10/acpi/sata.asl b/src/mainboard/iei/kino_780am2fam10/acpi/sata.asl new file mode 100644 index 0000000..723b4aa --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/iei/kino_780am2fam10/acpi/usb.asl b/src/mainboard/iei/kino_780am2fam10/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/iei/kino_780am2fam10/acpi_tables.c b/src/mainboard/iei/kino_780am2fam10/acpi_tables.c new file mode 100644 index 0000000..5efb0ee --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/acpi_tables.c @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010-2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + + /* TODO: More HT and other tables need to go into this table generation. + * This should also be moved out to the silicon level if it can. + */ + + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot PSTATE/TOM SSDT at %lx\n", current); + ssdt = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/iei/kino_780am2fam10/board_info.txt b/src/mainboard/iei/kino_780am2fam10/board_info.txt new file mode 100644 index 0000000..8265642 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/board_info.txt @@ -0,0 +1,4 @@ +Board name: Kino-780AM2 +Category: half +Board URL: http://web.archive.org/web/20111208234719/http://ieiworld.com/product_groups... +ROM protocol: SPI diff --git a/src/mainboard/iei/kino_780am2fam10/cmos.layout b/src/mainboard/iei/kino_780am2fam10/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/iei/kino_780am2fam10/devicetree.cb b/src/mainboard/iei/kino_780am2fam10/devicetree.cb new file mode 100644 index 0000000..0bd9de4 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/devicetree.cb @@ -0,0 +1,71 @@ +# Config for iei/kino_780am2fam10 +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM2r2 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 on end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "1" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f71859 + device pnp 2e.3 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + end #SIO + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end #domain +end #root_complex + diff --git a/src/mainboard/iei/kino_780am2fam10/dsdt.asl b/src/mainboard/iei/kino_780am2fam10/dsdt.asl new file mode 100644 index 0000000..b5a6faf --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/dsdt.asl @@ -0,0 +1,1868 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "IEI ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 /* defined by HPET table? */ + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* f71859 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ +#if 0 + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/iei/kino_780am2fam10/get_bus_conf.c b/src/mainboard/iei/kino_780am2fam10/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/iei/kino_780am2fam10/irq_tables.c b/src/mainboard/iei/kino_780am2fam10/irq_tables.c new file mode 100644 index 0000000..87c414a --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs780[8]; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/iei/kino_780am2fam10/mainboard.c b/src/mainboard/iei/kino_780am2fam10/mainboard.c new file mode 100644 index 0000000..43ff9c1 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/mainboard.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +void set_pcie_dereset(void); +void set_pcie_reset(void); +u8 is_dev3_present(void); +/* TODO - Need to find GPIO for PCIE slot. + * Kino uses GPIO ? as PCIe slot reset, GPIO? as GFX slot reset. We need to + * pull it up before training the slot. + ***/ +void set_pcie_dereset() +{ + /* PCIE slot not yet supported.*/ +} + +void set_pcie_reset() +{ + /* PCIE slot not yet supported.*/ +} + +u8 is_dev3_present(void) +{ + return 0; +} + +/************************************************* +* enable the dedicated function in kino board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard Kino Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/iei/kino_780am2fam10/mb_sysconf.h b/src/mainboard/iei/kino_780am2fam10/mb_sysconf.h new file mode 100644 index 0000000..25d63d5 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/mb_sysconf.h @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + u8 bus_isa; + u8 bus_8132_0; + u8 bus_8132_1; + u8 bus_8132_2; + u8 bus_8111_0; + u8 bus_8111_1; + u8 bus_8132a[31][3]; + u8 bus_8151[31][2]; + + u32 apicid_8111; + u32 apicid_8132_1; + u32 apicid_8132_2; + u32 apicid_8132a[31][2]; + u32 sbdn3; + u32 sbdn3a[31]; + u32 sbdn5[31]; +}; + +#endif diff --git a/src/mainboard/iei/kino_780am2fam10/mptable.c b/src/mainboard/iei/kino_780am2fam10/mptable.c new file mode 100644 index 0000000..11426c2 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/mptable.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/iei/kino_780am2fam10/resourcemap.c b/src/mainboard/iei/kino_780am2fam10/resourcemap.c new file mode 100644 index 0000000..fc92f62 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/resourcemap.c @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/iei/kino_780am2fam10/romstage.c b/src/mainboard/iei/kino_780am2fam10/romstage.c new file mode 100644 index 0000000..e1230e5 --- /dev/null +++ b/src/mainboard/iei/kino_780am2fam10/romstage.c @@ -0,0 +1,251 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/fintek/common/fintek.h> +#include <superio/fintek/f71859/f71859.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#define SERIAL_DEV PNP_DEV(0x2e, F71859_SP1) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + + #if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); + #endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + + #if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + #endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF}; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + + return 0; +} diff --git a/src/mainboard/iei/nova4899r/Kconfig b/src/mainboard/iei/nova4899r/Kconfig deleted file mode 100644 index 8d0a9a4..0000000 --- a/src/mainboard/iei/nova4899r/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_IEI_NOVA_4899R - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_WINBOND_W83977TF - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select HAVE_OPTION_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default iei/nova4899r - -config MAINBOARD_PART_NUMBER - string - default "NOVA-4899R" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_IEI_NOVA_4899R diff --git a/src/mainboard/iei/nova4899r/board_info.txt b/src/mainboard/iei/nova4899r/board_info.txt deleted file mode 100644 index 6ffdfbe..0000000 --- a/src/mainboard/iei/nova4899r/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.icpamerica.com/products/single_board_computers/5_25_NOVA/NOVA-489... diff --git a/src/mainboard/iei/nova4899r/cmos.layout b/src/mainboard/iei/nova4899r/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/iei/nova4899r/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/iei/nova4899r/devicetree.cb b/src/mainboard/iei/nova4899r/devicetree.cb deleted file mode 100644 index f27662e..0000000 --- a/src/mainboard/iei/nova4899r/devicetree.cb +++ /dev/null @@ -1,64 +0,0 @@ -chip northbridge/amd/gx1 - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5530 - device pci 0a.0 on end # ETH0 - device pci 0b.0 off end # ETH1 - device pci 0c.0 on end # ETH2 - device pci 0f.0 on end # PCI slot - device pci 12.0 on - chip superio/winbond/w83977tf - device pnp 2e.0 on # FDC - irq 0x70 = 6 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off # Reserved - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 0x01 # Int 1 for PS/2 keyboard - irq 0x72 = 0x0c # Int 12 for PS/2 mouse - end - device pnp 2e.6 on # IR - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.7 on # GAME/MIDI/GPIO1 - io 0x60 = 0x290 - end - device pnp 2e.8 on # GPIO2 - io 0x60 = 0x110 - end - device pnp 2e.9 on # GPIO3 - io 0x60 = 0x120 - end - device pnp 2e.A on # Power Management - io 0x60 = 0xe800 - end - end - device pci 12.1 on end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA onboard - end - device pci 13.0 on end # USB - end - end - - chip cpu/amd/geode_gx1 - end - -end - diff --git a/src/mainboard/iei/nova4899r/irq_tables.c b/src/mainboard/iei/nova4899r/irq_tables.c deleted file mode 100644 index 785e0f3..0000000 --- a/src/mainboard/iei/nova4899r/irq_tables.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -/* - * IRQ 5530 USB Network Network Network free - * controller northbridge device device#0 device#1 device#2 slot - * 00.13.0 00.0a.00 00.0b.00 00.0c.00 00.0f.00 - * ------------------------------------------------------------------------ - * 14 INTA# INTA# n.c. n.c. n.c. INTA# - * 5 INTB# n.c. n.c. n.c. INTA# n.c. - * 10 INTC# n.c. n.c. INTA# n.c. n.c. - * 11 INTD# n.c. INTA# n.c. n.c. n.c. - */ - -/* - * - the USB controller should be connected to IRQ14 - * - the network controller #0 should be connected to IRQ11 - * - the network controller #1 should be connected to IRQ10 - * - the network controller #2 should be connected to IRQ5 - * - the additional PCI slot must share the IRQ with the internal USB - */ - -/* Bit 9 means IRQ 9 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK0 0x0200 -/* Bit 5 means IRQ 5 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK1 0x0020 -/* Bit 10 means IRQ10 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK2 0x0400 -/* Bit 11 means IRQ11 is available for this cs5530 INT input. */ -#define IRQ_BITMAP_LINK3 0x0800 - -static const struct irq_routing_table intel_irq_routing_table = { - .signature = PIRQ_SIGNATURE, /* u32 signature */ - .version = PIRQ_VERSION, /* u16 version */ - .size = 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total 4 devices on the bus */ - .rtr_bus = 0x00, /* Where the interrupt router lies (bus) */ - .rtr_devfn = (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - .exclusive_irqs = 0x4C20, /* IRQs devoted exclusively to PCI usage */ - .rtr_vendor = 0x1078, /* Vendor */ - .rtr_device = 0x0100, /* Device */ - .miniport_data = 0, /* Miniport data */ - .checksum = 0xBF+16, /* TODO! calculate correct sum ! */ -/* - * Definition for "slot#0". There is no real slot, - * the network device is soldered... - */ - .slots = { - [0] = { - .bus = 0x00, - .devfn = (0x0a<<3)|0x0, - .irq = { - [0] = { - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [1] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [2] = { /* = device INTA output */ - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [3] = { - .link = 0x04, /* = cs5530 INT D input */ - .bitmap = IRQ_BITMAP_LINK3 - } - }, - .slot = 0x3, /* soldered */ - }, -/* - * Definition for "slot#1". There is no real slot, - * the network device is soldered... - * - * Configuration is ommited on purpose in the attempt of solving the - * issue with IRQ panics (this is device is actually eth1). - - [1] = { - .bus = 0x00, - .devfn = (0x0b<<3)|0x0, - .irq = { - [0] = { - .link = 0x04, - .bitmap = IRQ_BITMAP_LINK3 - }, - [1] = { - .link = 0x03, - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { - .link = 0x02, - .bitmap = IRQ_BITMAP_LINK1 - }, - [3] = { - .link = 0x01, - .bitmap = IRQ_BITMAP_LINK0 - } - }, - .slot = 0x2, - }, - */ - -/* - * Definition for "slot#2". There is no real slot, - * the network device is soldered... - */ - [2] = { - .bus = 0x00, - .devfn = (0x0c<<3)|0x0, - .irq = { - [0] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [1] = { - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [2] = { /* = device INTA output */ - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [3] = { - .link = 0x02, /* = cs5530 INT B input */ - .bitmap = IRQ_BITMAP_LINK1 - } - }, - .slot = 0x1, /* soldered */ - }, -/* - * This is a free PCI slot. - */ - [3] = { - .bus = 0x00, - .devfn = (0x0f<<3)|0x0, - .irq = { - [0] = { /* = device INTA output */ - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [1] = { - .link = 0x03, /* = cs5530 INT C input */ - .bitmap = IRQ_BITMAP_LINK2 - }, - [2] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [3] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - } - }, - .slot = 0x6, /* FIXME: should be not 0, as it defines a real slot */ - }, -/* - * Definition for "slot#3". There is no real slot, - * the USB device is embedded... - */ - [4] = { - .bus = 0x00, - .devfn = (0x13<<3)|0x0, - .irq = { - [0] = { - .link = 0x02, /* INT B */ - .bitmap = IRQ_BITMAP_LINK1 - }, - [1] = { - .link = 0x01, /* INT A */ - .bitmap = IRQ_BITMAP_LINK0 - }, - [2] = { - .link = 0x04, /* INT D */ - .bitmap = IRQ_BITMAP_LINK3 - }, - [3] = { - .link = 0x03, /* INT C */ - .bitmap = IRQ_BITMAP_LINK2 - } - }, - .slot = 0x5, /* chip internal */ - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param addr Destination address (between 0xF0000...0x100000). - * @return The end address of the pirq routing table in memory. - **/ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/nova4899r/romstage.c b/src/mainboard/iei/nova4899r/romstage.c deleted file mode 100644 index 2b6caf3..0000000 --- a/src/mainboard/iei/nova4899r/romstage.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "superio/winbond/w83977tf/early_serial.c" -#include "southbridge/amd/cs5530/enable_rom.c" -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -#include "northbridge/amd/gx1/raminit.c" - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} diff --git a/src/mainboard/iei/nova_4899r/Kconfig b/src/mainboard/iei/nova_4899r/Kconfig new file mode 100644 index 0000000..9252eaa --- /dev/null +++ b/src/mainboard/iei/nova_4899r/Kconfig @@ -0,0 +1,46 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_IEI_NOVA_4899R + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_GX1 + select NORTHBRIDGE_AMD_GX1 + select SOUTHBRIDGE_AMD_CS5530 + select SUPERIO_WINBOND_W83977TF + select ROMCC + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select HAVE_OPTION_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default iei/nova_4899r + +config MAINBOARD_PART_NUMBER + string + default "NOVA-4899R" + +config IRQ_SLOT_COUNT + int + default 5 + +endif # BOARD_IEI_NOVA_4899R diff --git a/src/mainboard/iei/nova_4899r/board_info.txt b/src/mainboard/iei/nova_4899r/board_info.txt new file mode 100644 index 0000000..6ffdfbe --- /dev/null +++ b/src/mainboard/iei/nova_4899r/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.icpamerica.com/products/single_board_computers/5_25_NOVA/NOVA-489... diff --git a/src/mainboard/iei/nova_4899r/cmos.layout b/src/mainboard/iei/nova_4899r/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/iei/nova_4899r/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/iei/nova_4899r/devicetree.cb b/src/mainboard/iei/nova_4899r/devicetree.cb new file mode 100644 index 0000000..f27662e --- /dev/null +++ b/src/mainboard/iei/nova_4899r/devicetree.cb @@ -0,0 +1,64 @@ +chip northbridge/amd/gx1 + device domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5530 + device pci 0a.0 on end # ETH0 + device pci 0b.0 off end # ETH1 + device pci 0c.0 on end # ETH2 + device pci 0f.0 on end # PCI slot + device pci 12.0 on + chip superio/winbond/w83977tf + device pnp 2e.0 on # FDC + irq 0x70 = 6 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 off # Reserved + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 0x01 # Int 1 for PS/2 keyboard + irq 0x72 = 0x0c # Int 12 for PS/2 mouse + end + device pnp 2e.6 on # IR + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.7 on # GAME/MIDI/GPIO1 + io 0x60 = 0x290 + end + device pnp 2e.8 on # GPIO2 + io 0x60 = 0x110 + end + device pnp 2e.9 on # GPIO3 + io 0x60 = 0x120 + end + device pnp 2e.A on # Power Management + io 0x60 = 0xe800 + end + end + device pci 12.1 on end # SMI + device pci 12.2 on end # IDE + device pci 12.3 on end # Audio + device pci 12.4 on end # VGA onboard + end + device pci 13.0 on end # USB + end + end + + chip cpu/amd/geode_gx1 + end + +end + diff --git a/src/mainboard/iei/nova_4899r/irq_tables.c b/src/mainboard/iei/nova_4899r/irq_tables.c new file mode 100644 index 0000000..785e0f3 --- /dev/null +++ b/src/mainboard/iei/nova_4899r/irq_tables.c @@ -0,0 +1,214 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +/* + * IRQ 5530 USB Network Network Network free + * controller northbridge device device#0 device#1 device#2 slot + * 00.13.0 00.0a.00 00.0b.00 00.0c.00 00.0f.00 + * ------------------------------------------------------------------------ + * 14 INTA# INTA# n.c. n.c. n.c. INTA# + * 5 INTB# n.c. n.c. n.c. INTA# n.c. + * 10 INTC# n.c. n.c. INTA# n.c. n.c. + * 11 INTD# n.c. INTA# n.c. n.c. n.c. + */ + +/* + * - the USB controller should be connected to IRQ14 + * - the network controller #0 should be connected to IRQ11 + * - the network controller #1 should be connected to IRQ10 + * - the network controller #2 should be connected to IRQ5 + * - the additional PCI slot must share the IRQ with the internal USB + */ + +/* Bit 9 means IRQ 9 is available for this cs5530 INT input. */ +#define IRQ_BITMAP_LINK0 0x0200 +/* Bit 5 means IRQ 5 is available for this cs5530 INT input. */ +#define IRQ_BITMAP_LINK1 0x0020 +/* Bit 10 means IRQ10 is available for this cs5530 INT input. */ +#define IRQ_BITMAP_LINK2 0x0400 +/* Bit 11 means IRQ11 is available for this cs5530 INT input. */ +#define IRQ_BITMAP_LINK3 0x0800 + +static const struct irq_routing_table intel_irq_routing_table = { + .signature = PIRQ_SIGNATURE, /* u32 signature */ + .version = PIRQ_VERSION, /* u16 version */ + .size = 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total 4 devices on the bus */ + .rtr_bus = 0x00, /* Where the interrupt router lies (bus) */ + .rtr_devfn = (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ + .exclusive_irqs = 0x4C20, /* IRQs devoted exclusively to PCI usage */ + .rtr_vendor = 0x1078, /* Vendor */ + .rtr_device = 0x0100, /* Device */ + .miniport_data = 0, /* Miniport data */ + .checksum = 0xBF+16, /* TODO! calculate correct sum ! */ +/* + * Definition for "slot#0". There is no real slot, + * the network device is soldered... + */ + .slots = { + [0] = { + .bus = 0x00, + .devfn = (0x0a<<3)|0x0, + .irq = { + [0] = { + .link = 0x03, /* INT C */ + .bitmap = IRQ_BITMAP_LINK2 + }, + [1] = { + .link = 0x02, /* INT B */ + .bitmap = IRQ_BITMAP_LINK1 + }, + [2] = { /* = device INTA output */ + .link = 0x01, /* INT A */ + .bitmap = IRQ_BITMAP_LINK0 + }, + [3] = { + .link = 0x04, /* = cs5530 INT D input */ + .bitmap = IRQ_BITMAP_LINK3 + } + }, + .slot = 0x3, /* soldered */ + }, +/* + * Definition for "slot#1". There is no real slot, + * the network device is soldered... + * + * Configuration is ommited on purpose in the attempt of solving the + * issue with IRQ panics (this is device is actually eth1). + + [1] = { + .bus = 0x00, + .devfn = (0x0b<<3)|0x0, + .irq = { + [0] = { + .link = 0x04, + .bitmap = IRQ_BITMAP_LINK3 + }, + [1] = { + .link = 0x03, + .bitmap = IRQ_BITMAP_LINK2 + }, + [2] = { + .link = 0x02, + .bitmap = IRQ_BITMAP_LINK1 + }, + [3] = { + .link = 0x01, + .bitmap = IRQ_BITMAP_LINK0 + } + }, + .slot = 0x2, + }, + */ + +/* + * Definition for "slot#2". There is no real slot, + * the network device is soldered... + */ + [2] = { + .bus = 0x00, + .devfn = (0x0c<<3)|0x0, + .irq = { + [0] = { + .link = 0x01, /* INT A */ + .bitmap = IRQ_BITMAP_LINK0 + }, + [1] = { + .link = 0x04, /* INT D */ + .bitmap = IRQ_BITMAP_LINK3 + }, + [2] = { /* = device INTA output */ + .link = 0x03, /* INT C */ + .bitmap = IRQ_BITMAP_LINK2 + }, + [3] = { + .link = 0x02, /* = cs5530 INT B input */ + .bitmap = IRQ_BITMAP_LINK1 + } + }, + .slot = 0x1, /* soldered */ + }, +/* + * This is a free PCI slot. + */ + [3] = { + .bus = 0x00, + .devfn = (0x0f<<3)|0x0, + .irq = { + [0] = { /* = device INTA output */ + .link = 0x04, /* INT D */ + .bitmap = IRQ_BITMAP_LINK3 + }, + [1] = { + .link = 0x03, /* = cs5530 INT C input */ + .bitmap = IRQ_BITMAP_LINK2 + }, + [2] = { + .link = 0x02, /* INT B */ + .bitmap = IRQ_BITMAP_LINK1 + }, + [3] = { + .link = 0x01, /* INT A */ + .bitmap = IRQ_BITMAP_LINK0 + } + }, + .slot = 0x6, /* FIXME: should be not 0, as it defines a real slot */ + }, +/* + * Definition for "slot#3". There is no real slot, + * the USB device is embedded... + */ + [4] = { + .bus = 0x00, + .devfn = (0x13<<3)|0x0, + .irq = { + [0] = { + .link = 0x02, /* INT B */ + .bitmap = IRQ_BITMAP_LINK1 + }, + [1] = { + .link = 0x01, /* INT A */ + .bitmap = IRQ_BITMAP_LINK0 + }, + [2] = { + .link = 0x04, /* INT D */ + .bitmap = IRQ_BITMAP_LINK3 + }, + [3] = { + .link = 0x03, /* INT C */ + .bitmap = IRQ_BITMAP_LINK2 + } + }, + .slot = 0x5, /* chip internal */ + } + } +}; + +/** + * Copy the IRQ routing table to memory. + * + * @param addr Destination address (between 0xF0000...0x100000). + * @return The end address of the pirq routing table in memory. + **/ +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iei/nova_4899r/romstage.c b/src/mainboard/iei/nova_4899r/romstage.c new file mode 100644 index 0000000..2b6caf3 --- /dev/null +++ b/src/mainboard/iei/nova_4899r/romstage.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Luis Correia luis.f.correia@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "superio/winbond/w83977tf/early_serial.c" +#include "southbridge/amd/cs5530/enable_rom.c" +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +#include "northbridge/amd/gx1/raminit.c" + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + cs5530_enable_rom(); + sdram_init(); +} diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig deleted file mode 100644 index 74a3c10..0000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if BOARD_IEI_PCISA_LX_800_R10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_256 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pcisa-lx-800-r10 - -config MAINBOARD_PART_NUMBER - string - default "PCISA-LX-800-R10" - -config IRQ_SLOT_COUNT - int - default 9 - -config PLLMSRlo - hex - default 0x00DE6000 - -endif # BOARD_IEI_PCISA_LX_800_R10 diff --git a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt b/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt deleted file mode 100644 index b5a9773..0000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX diff --git a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb b/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb deleted file mode 100644 index a6dba30..0000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/devicetree.cb +++ /dev/null @@ -1,76 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000105a" - register "lpc_serirq_polarity" = "0x0000EFA5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "1" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 9.0 on end # Slot1 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot3 - device pci c.0 on end # Slot4 - device pci e.0 on end # Ethernet 0 - device pci 10.0 on end # Ethernet 1 - device pci 11.0 on end # SATA - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off end # HW Monitor - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end - diff --git a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c b/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c deleted file mode 100644 index 9396058..0000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/irq_tables.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> -// #include <console/console.h> -#include <arch/io.h> - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 5 - -/* Link */ -#define LINK_PIRQA 1 -#define LINK_PIRQB 2 -#define LINK_PIRQC 3 -#define LINK_PIRQD 4 -#define LINK_NONE 0 - -/* Map */ -#define IRQ_BITMAP_LINKA (1 << PIRQA) -#define IRQ_BITMAP_LINKB (1 << PIRQB) -#define IRQ_BITMAP_LINKC (1 << PIRQC) -#define IRQ_BITMAP_LINKD (1 << PIRQD) -#define IRQ_BITMAP_NOLINK 0x0 - -#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x0002, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x62, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - - .slots = { - [0] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x01<<3)|0x0, /* 0x01 is CS5536 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [1] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0f<<3)|0x0, /* 0x0f is CS5536 (USB, AUDIO) */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQB, /* Audio */ - .bitmap = IRQ_BITMAP_LINKB - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQD, /* USB */ - .bitmap = IRQ_BITMAP_LINKD - } - } - }, - - [2] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x0e<<3)|0x0, /* 0x0e is eth0 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [3] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x10<<3)|0x0, /* 0x10 is eth1 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - - [4] = { - .slot = 0x0, /* means also "on board" */ - .bus = 0x00, - .devfn = (0x11<<3)|0x0, /* 0x11 is SATA */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_NONE, - .bitmap = IRQ_BITMAP_NOLINK - } - } - }, - -/* - * ################### backplane ################### - */ - -/* - * PCI1 - */ - [5] = { - .slot = 0x1, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x09<<3)|0x0, /* 0x09 is PCI1 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - } - } - }, -/* - * PCI2 - */ - [6] = { - .slot = 0x2, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0a<<3)|0x0, /* 0x0a is PCI2 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - } - } - }, -/* - * PCI3 - */ - [7] = { - .slot = 0x3, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0b<<3)|0x0, /* 0x0b is PCI3 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - } - } - }, -/* - * PCI4 - */ - [8] = { - .slot = 0x4, /* This is real PCI slot. */ - .bus = 0x00, - .devfn = (0x0c<<3)|0x0, /* 0x0c is PCI4 */ - .irq = { - [0] = { /* <-- 0 means this is INTA# output from the device or slot */ - .link = LINK_PIRQB, - .bitmap = IRQ_BITMAP_LINKB - }, - [1] = { /* <-- 1 means this is INTB# output from the device or slot */ - .link = LINK_PIRQC, - .bitmap = IRQ_BITMAP_LINKC - }, - [2] = { /* <-- 2 means this is INTC# output from the device or slot */ - .link = LINK_PIRQD, - .bitmap = IRQ_BITMAP_LINKD - }, - [3] = { /* <-- 3 means this is INTD# output from the device or slot */ - .link = LINK_PIRQA, - .bitmap = IRQ_BITMAP_LINKA - } - } - }, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - /* Put the PIR table in memory and checksum. */ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c deleted file mode 100644 index 9f42232..0000000 --- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include <spd.h> -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/iei/pcisa_lx_800_r10/Kconfig b/src/mainboard/iei/pcisa_lx_800_r10/Kconfig new file mode 100644 index 0000000..4371323 --- /dev/null +++ b/src/mainboard/iei/pcisa_lx_800_r10/Kconfig @@ -0,0 +1,32 @@ +if BOARD_IEI_PCISA_LX_800_R10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select BOARD_ROMSIZE_KB_256 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266 + +config MAINBOARD_DIR + string + default iei/pcisa_lx_800_r10 + +config MAINBOARD_PART_NUMBER + string + default "PCISA-LX-800-R10" + +config IRQ_SLOT_COUNT + int + default 9 + +config PLLMSRlo + hex + default 0x00DE6000 + +endif # BOARD_IEI_PCISA_LX_800_R10 diff --git a/src/mainboard/iei/pcisa_lx_800_r10/board_info.txt b/src/mainboard/iei/pcisa_lx_800_r10/board_info.txt new file mode 100644 index 0000000..b5a9773 --- /dev/null +++ b/src/mainboard/iei/pcisa_lx_800_r10/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=PCISA-LX diff --git a/src/mainboard/iei/pcisa_lx_800_r10/devicetree.cb b/src/mainboard/iei/pcisa_lx_800_r10/devicetree.cb new file mode 100644 index 0000000..a6dba30 --- /dev/null +++ b/src/mainboard/iei/pcisa_lx_800_r10/devicetree.cb @@ -0,0 +1,76 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x0000105a" + register "lpc_serirq_polarity" = "0x0000EFA5" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "1" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 9.0 on end # Slot1 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot3 + device pci c.0 on end # Slot4 + device pci e.0 on end # Ethernet 0 + device pci 10.0 on end # Ethernet 1 + device pci 11.0 on end # SATA + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off end # HW Monitor + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end + diff --git a/src/mainboard/iei/pcisa_lx_800_r10/irq_tables.c b/src/mainboard/iei/pcisa_lx_800_r10/irq_tables.c new file mode 100644 index 0000000..9396058 --- /dev/null +++ b/src/mainboard/iei/pcisa_lx_800_r10/irq_tables.c @@ -0,0 +1,296 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> +// #include <console/console.h> +#include <arch/io.h> + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 5 + +/* Link */ +#define LINK_PIRQA 1 +#define LINK_PIRQB 2 +#define LINK_PIRQC 3 +#define LINK_PIRQD 4 +#define LINK_NONE 0 + +/* Map */ +#define IRQ_BITMAP_LINKA (1 << PIRQA) +#define IRQ_BITMAP_LINKB (1 << PIRQB) +#define IRQ_BITMAP_LINKC (1 << PIRQC) +#define IRQ_BITMAP_LINKD (1 << PIRQD) +#define IRQ_BITMAP_NOLINK 0x0 + +#define EXCLUSIVE_PCI_IRQS (IRQ_BITMAP_LINKA | IRQ_BITMAP_LINKB | IRQ_BITMAP_LINKC | IRQ_BITMAP_LINKD) + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + EXCLUSIVE_PCI_IRQS, /* IRQs devoted exclusively to PCI usage */ + 0x1078, /* Vendor */ + 0x0002, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x62, /* u8 checksum , this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + + .slots = { + [0] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x01<<3)|0x0, /* 0x01 is CS5536 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + } + } + }, + + [1] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x0f<<3)|0x0, /* 0x0f is CS5536 (USB, AUDIO) */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_PIRQB, /* Audio */ + .bitmap = IRQ_BITMAP_LINKB + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_PIRQD, /* USB */ + .bitmap = IRQ_BITMAP_LINKD + } + } + }, + + [2] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x0e<<3)|0x0, /* 0x0e is eth0 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQD, + .bitmap = IRQ_BITMAP_LINKD + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + } + } + }, + + [3] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x10<<3)|0x0, /* 0x10 is eth1 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQB, + .bitmap = IRQ_BITMAP_LINKB + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + } + } + }, + + [4] = { + .slot = 0x0, /* means also "on board" */ + .bus = 0x00, + .devfn = (0x11<<3)|0x0, /* 0x11 is SATA */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_NONE, + .bitmap = IRQ_BITMAP_NOLINK + } + } + }, + +/* + * ################### backplane ################### + */ + +/* + * PCI1 + */ + [5] = { + .slot = 0x1, /* This is real PCI slot. */ + .bus = 0x00, + .devfn = (0x09<<3)|0x0, /* 0x09 is PCI1 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_PIRQB, + .bitmap = IRQ_BITMAP_LINKB + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_PIRQC, + .bitmap = IRQ_BITMAP_LINKC + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_PIRQD, + .bitmap = IRQ_BITMAP_LINKD + } + } + }, +/* + * PCI2 + */ + [6] = { + .slot = 0x2, /* This is real PCI slot. */ + .bus = 0x00, + .devfn = (0x0a<<3)|0x0, /* 0x0a is PCI2 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQD, + .bitmap = IRQ_BITMAP_LINKD + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_PIRQB, + .bitmap = IRQ_BITMAP_LINKB + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_PIRQC, + .bitmap = IRQ_BITMAP_LINKC + } + } + }, +/* + * PCI3 + */ + [7] = { + .slot = 0x3, /* This is real PCI slot. */ + .bus = 0x00, + .devfn = (0x0b<<3)|0x0, /* 0x0b is PCI3 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQC, + .bitmap = IRQ_BITMAP_LINKC + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_PIRQD, + .bitmap = IRQ_BITMAP_LINKD + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_PIRQB, + .bitmap = IRQ_BITMAP_LINKB + } + } + }, +/* + * PCI4 + */ + [8] = { + .slot = 0x4, /* This is real PCI slot. */ + .bus = 0x00, + .devfn = (0x0c<<3)|0x0, /* 0x0c is PCI4 */ + .irq = { + [0] = { /* <-- 0 means this is INTA# output from the device or slot */ + .link = LINK_PIRQB, + .bitmap = IRQ_BITMAP_LINKB + }, + [1] = { /* <-- 1 means this is INTB# output from the device or slot */ + .link = LINK_PIRQC, + .bitmap = IRQ_BITMAP_LINKC + }, + [2] = { /* <-- 2 means this is INTC# output from the device or slot */ + .link = LINK_PIRQD, + .bitmap = IRQ_BITMAP_LINKD + }, + [3] = { /* <-- 3 means this is INTD# output from the device or slot */ + .link = LINK_PIRQA, + .bitmap = IRQ_BITMAP_LINKA + } + } + }, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + /* Put the PIR table in memory and checksum. */ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iei/pcisa_lx_800_r10/romstage.c b/src/mainboard/iei/pcisa_lx_800_r10/romstage.c new file mode 100644 index 0000000..9f42232 --- /dev/null +++ b/src/mainboard/iei/pcisa_lx_800_r10/romstage.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include <spd.h> +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ +} diff --git a/src/mainboard/iei/pm-lx-800-r11/Kconfig b/src/mainboard/iei/pm-lx-800-r11/Kconfig deleted file mode 100644 index 61c2772..0000000 --- a/src/mainboard/iei/pm-lx-800-r11/Kconfig +++ /dev/null @@ -1,53 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -if BOARD_IEI_PM_LX_800_R11 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627EHG - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pm-lx-800-r11 - -config MAINBOARD_PART_NUMBER - string - default "PM-LX-800-R11" - -config IRQ_SLOT_COUNT - int - default 7 - -config PLLMSRlo - hex - default 0x07de0000 - -endif # BOARD_IEI_PM_LX_800_R11 diff --git a/src/mainboard/iei/pm-lx-800-r11/board_info.txt b/src/mainboard/iei/pm-lx-800-r11/board_info.txt deleted file mode 100644 index f9a9fdb..0000000 --- a/src/mainboard/iei/pm-lx-800-r11/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=000010000... -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/iei/pm-lx-800-r11/devicetree.cb b/src/mainboard/iei/pm-lx-800-r11/devicetree.cb deleted file mode 100644 index 2bf4b7f..0000000 --- a/src/mainboard/iei/pm-lx-800-r11/devicetree.cb +++ /dev/null @@ -1,101 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Video Adapter - device pci 1.2 on end # AES Security Block - chip southbridge/amd/cs5536 - register "lpc_serirq_enable" = "0x0000115a" - register "lpc_serirq_polarity" = "0x0000eea5" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0d0c0700" - register "enable_ide_nand_flash" = "0" - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" - register "com1_enable" = "1" # CN10 (RS422/486 COM3) - register "com1_address" = "0x3e8" - register "com1_irq" = "5" - register "com2_enable" = "0" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci e.0 on end # RTL8100C - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627ehg # Winbond W83627EHG - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - - device pnp 2e.5 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard - irq 0x72 = 12 # Mouse - end - - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 0 - end - - device pnp 2e.6 off end # Serial Flash Interface - device pnp 2e.7 off end # GPIO1, GPIO6, Game Port & MIDI Port - device pnp 2e.8 off end # WDTO# & PLED - device pnp 2e.9 off end # GPIO2,GPIO3, GPIO4, GPIO5 & SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.106 off end # - device pnp 2e.107 off end # - device pnp 2e.207 off end # - - end - end - device pci f.2 on end # IDE Controller - device pci f.3 off end # Audio (N/A) - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/iei/pm-lx-800-r11/irq_tables.c b/src/mainboard/iei/pm-lx-800-r11/irq_tables.c deleted file mode 100644 index 66a3b70..0000000 --- a/src/mainboard/iei/pm-lx-800-r11/irq_tables.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/pci_ids.h> -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 11 -#define PIRQD 11 - -/* Links */ -#define L_PIRQA 1 -#define L_PIRQB 2 -#define L_PIRQC 3 -#define L_PIRQD 4 - -/* Bitmaps */ -#define B_LINK0 (1 << PIRQA) -#define B_LINK1 (1 << PIRQB) -#define B_LINK2 (1 << PIRQC) -#define B_LINK3 (1 << PIRQD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - 0x0f << 3, /* Interrupt router dev */ - B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3, /* IRQs devoted exclusively to PCI usage */ - PCI_VENDOR_ID_AMD, /* Vendor */ - PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ - 0, /* Miniport */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* Reserved */ - 0xa6, /* Checksum */ - { - [0] = { /* Host bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x01 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [1] = { /* ISA bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [2] = { /* Ethernet */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0e << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [2] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [3] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - } - } - }, - - [3] = { /* PCI Connector - Slot 0 */ - .slot = 0x01, - .bus = 0x00, - .devfn = (0x09 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [4] = { /* PCI Connector - Slot 1 */ - .slot = 0x02, - .bus = 0x00, - .devfn = (0x0c << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [1] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [2] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [3] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - } - } - }, - - [5] = { /* PCI Connector - Slot 2 */ - .slot = 0x03, - .bus = 0x00, - .devfn = (0x0b << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - }, - [1] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [2] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [3] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - } - } - }, - - [6] = { /* PCI Connector - Slot 3 */ - .slot = 0x04, - .bus = 0x00, - .devfn = (0x0a << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [2] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [3] = { - .link = L_PIRQC, - .bitmap = B_LINK2 - } - } - } - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pm-lx-800-r11/romstage.c b/src/mainboard/iei/pm-lx-800-r11/romstage.c deleted file mode 100644 index ac68b1d..0000000 --- a/src/mainboard/iei/pm-lx-800-r11/romstage.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdlib.h> -#include <spd.h> -#include <arch/io.h> -#include <arch/hlt.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <southbridge/amd/cs5536/early_smbus.c> -#include <southbridge/amd/cs5536/early_setup.c> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - /* Only DIMM0 is available. */ - if (device != DIMM0) - return 0xff; - - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/lx/pll_reset.c> -#include <lib/generic_sdram.c> -#include <cpu/amd/geode_lx/cpureginit.c> -#include <cpu/amd/geode_lx/syspreinit.c> -#include <cpu/amd/geode_lx/msrinit.c> - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); -} diff --git a/src/mainboard/iei/pm-lx2-800-r10/Kconfig b/src/mainboard/iei/pm-lx2-800-r10/Kconfig deleted file mode 100644 index 8e92e69..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/Kconfig +++ /dev/null @@ -1,53 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -if BOARD_IEI_PM_LX2_800_R10 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_266 - -config MAINBOARD_DIR - string - default iei/pm-lx2-800-r10 - -config MAINBOARD_PART_NUMBER - string - default "PM-LX2-800-R10" - -config IRQ_SLOT_COUNT - int - default 3 - -config PLLMSRlo - hex - default 0x07de0000 - -endif # BOARD_IEI_PM_LX2_800_R10 diff --git a/src/mainboard/iei/pm-lx2-800-r10/board_info.txt b/src/mainboard/iei/pm-lx2-800-r10/board_info.txt deleted file mode 100644 index 40edf4a..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=000010000... -ROM package: PLCC -ROM protocol: LPC -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb b/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb deleted file mode 100644 index f2166af..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Video Adapter - device pci 1.2 on end # AES Security Block - chip southbridge/amd/cs5536 - register "lpc_serirq_enable" = "0x000010da" - register "lpc_serirq_polarity" = "0x0000ef25" - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0d0c0700" - register "enable_ide_nand_flash" = "0" - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" - register "com1_enable" = "0" - register "com2_enable" = "0" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 11.0 on end # IT8888 - device pci e.0 on end # RTL8100C - device pci f.0 on # ISA Bridge - chip superio/smsc/smscsuperio # SMSC SCH3114 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - - device pnp 2e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - - device pnp 2e.7 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard - irq 0x72 = 12 # Mouse - end - - device pnp 2e.a on # Runtime Register - io 0x60 = 0x400 - end - end - end - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c b/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c deleted file mode 100644 index a3e9f52..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/irq_tables.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/pci_ids.h> -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 11 - -/* Links */ -#define L_PIRQN 0 -#define L_PIRQA 1 -#define L_PIRQB 2 -#define L_PIRQC 3 -#define L_PIRQD 4 - -/* Bitmaps */ -#define B_LINKN (0) -#define B_LINK0 (1 << PIRQA) -#define B_LINK1 (1 << PIRQB) -#define B_LINK2 (1 << PIRQC) -#define B_LINK3 (1 << PIRQD) - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x0f << 3) | 0x0, /* Interrupt router dev */ - (B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3),/* IRQs devoted exclusively to PCI usage */ - PCI_VENDOR_ID_AMD, /* Vendor */ - PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ - 0, /* Miniport */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, - 0x27, /* Checksum */ - { - [0] = { /* Host bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x01 << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQA, - .bitmap = B_LINK0 - }, - [1] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQN, - .bitmap = B_LINKN - } - } - }, - - [1] = { /* ISA bridge */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [1] = { - .link = L_PIRQB, - .bitmap = B_LINK1 - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - } - } - }, - - [2] = { /* Ethernet */ - .slot = 0x00, - .bus = 0x00, - .devfn = (0x0e << 3) | 0x0, - .irq = { - [0] = { - .link = L_PIRQD, - .bitmap = B_LINK3 - }, - [1] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [2] = { - .link = L_PIRQN, - .bitmap = B_LINKN - }, - [3] = { - .link = L_PIRQN, - .bitmap = B_LINKN - } - } - } - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iei/pm-lx2-800-r10/mainboard.c b/src/mainboard/iei/pm-lx2-800-r10/mainboard.c deleted file mode 100644 index f7f82c8..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/mainboard.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <device/pci.h> -#include <device/device.h> -#include <boot/tables.h> - -/* SCH3114 runtime register (RTR) address. */ -#define SCH3114_RTR_ADDR (0x400) -/* H/W Monitoring register block index. */ -#define SCH3114_RTR_HWM_IDX (SCH3114_RTR_ADDR + 0x70) -/* H/W Monitoring register block data. */ -#define SCH3114_RTR_HWM_DAT (SCH3114_RTR_ADDR + 0x71) -/* H/W Monitoring Ready/Lock/Start register. */ -#define SCH3114_HWM_RLS_REG (0x40) - -static void init(struct device *dev) -{ - /* SCH3114: enable hardware monitor. */ - printk(BIOS_INFO, "Enabling SCH3114 hardware monitor\n"); - outb(SCH3114_HWM_RLS_REG, SCH3114_RTR_HWM_IDX); - outb(inb(SCH3114_RTR_HWM_DAT) | 0x01, SCH3114_RTR_HWM_DAT); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/iei/pm-lx2-800-r10/romstage.c b/src/mainboard/iei/pm-lx2-800-r10/romstage.c deleted file mode 100644 index a83bf7e..0000000 --- a/src/mainboard/iei/pm-lx2-800-r10/romstage.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <spd.h> -#include <arch/io.h> -#include <arch/hlt.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include <southbridge/amd/cs5536/early_smbus.c> -#include <southbridge/amd/cs5536/early_setup.c> -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include <northbridge/amd/lx/raminit.h> - -#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - /* Only DIMM0 is available. */ - if (device != DIMM0) - return 0xFF; - - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/lx/pll_reset.c> -#include <lib/generic_sdram.c> -#include <cpu/amd/geode_lx/cpureginit.c> -#include <cpu/amd/geode_lx/syspreinit.c> -#include <cpu/amd/geode_lx/msrinit.c> - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Enable COM3. */ - device_t dev = PNP_DEV(0x2e, 0x0b); - u16 port = dev >> 8; - outb(0x55, port); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 4); - pnp_set_enable(dev, 1); - outb(0xaa, port); - - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); -} diff --git a/src/mainboard/iei/pm_lx2_800_r10/Kconfig b/src/mainboard/iei/pm_lx2_800_r10/Kconfig new file mode 100644 index 0000000..0b96634 --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/Kconfig @@ -0,0 +1,53 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +if BOARD_IEI_PM_LX2_800_R10 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266 + +config MAINBOARD_DIR + string + default iei/pm_lx2_800_r10 + +config MAINBOARD_PART_NUMBER + string + default "PM-LX2-800-R10" + +config IRQ_SLOT_COUNT + int + default 3 + +config PLLMSRlo + hex + default 0x07de0000 + +endif # BOARD_IEI_PM_LX2_800_R10 diff --git a/src/mainboard/iei/pm_lx2_800_r10/board_info.txt b/src/mainboard/iei/pm_lx2_800_r10/board_info.txt new file mode 100644 index 0000000..40edf4a --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=000010000... +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/iei/pm_lx2_800_r10/devicetree.cb b/src/mainboard/iei/pm_lx2_800_r10/devicetree.cb new file mode 100644 index 0000000..f2166af --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/devicetree.cb @@ -0,0 +1,87 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Video Adapter + device pci 1.2 on end # AES Security Block + chip southbridge/amd/cs5536 + register "lpc_serirq_enable" = "0x000010da" + register "lpc_serirq_polarity" = "0x0000ef25" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0d0c0700" + register "enable_ide_nand_flash" = "0" + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" + register "com1_enable" = "0" + register "com2_enable" = "0" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 11.0 on end # IT8888 + device pci e.0 on end # RTL8100C + device pci f.0 on # ISA Bridge + chip superio/smsc/smscsuperio # SMSC SCH3114 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + + device pnp 2e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + + device pnp 2e.7 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard + irq 0x72 = 12 # Mouse + end + + device pnp 2e.a on # Runtime Register + io 0x60 = 0x400 + end + end + end + device pci f.2 on end # IDE Controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/iei/pm_lx2_800_r10/irq_tables.c b/src/mainboard/iei/pm_lx2_800_r10/irq_tables.c new file mode 100644 index 0000000..a3e9f52 --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/irq_tables.c @@ -0,0 +1,134 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/pci_ids.h> +#include <arch/pirq_routing.h> + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 11 + +/* Links */ +#define L_PIRQN 0 +#define L_PIRQA 1 +#define L_PIRQB 2 +#define L_PIRQC 3 +#define L_PIRQD 4 + +/* Bitmaps */ +#define B_LINKN (0) +#define B_LINK0 (1 << PIRQA) +#define B_LINK1 (1 << PIRQB) +#define B_LINK2 (1 << PIRQC) +#define B_LINK3 (1 << PIRQD) + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x0f << 3) | 0x0, /* Interrupt router dev */ + (B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3),/* IRQs devoted exclusively to PCI usage */ + PCI_VENDOR_ID_AMD, /* Vendor */ + PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ + 0, /* Miniport */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, + 0x27, /* Checksum */ + { + [0] = { /* Host bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x01 << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [1] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQN, + .bitmap = B_LINKN + } + } + }, + + [1] = { /* ISA bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0f << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [1] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + } + } + }, + + [2] = { /* Ethernet */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0e << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [1] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [2] = { + .link = L_PIRQN, + .bitmap = B_LINKN + }, + [3] = { + .link = L_PIRQN, + .bitmap = B_LINKN + } + } + } + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iei/pm_lx2_800_r10/mainboard.c b/src/mainboard/iei/pm_lx2_800_r10/mainboard.c new file mode 100644 index 0000000..f7f82c8 --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/mainboard.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <device/pci.h> +#include <device/device.h> +#include <boot/tables.h> + +/* SCH3114 runtime register (RTR) address. */ +#define SCH3114_RTR_ADDR (0x400) +/* H/W Monitoring register block index. */ +#define SCH3114_RTR_HWM_IDX (SCH3114_RTR_ADDR + 0x70) +/* H/W Monitoring register block data. */ +#define SCH3114_RTR_HWM_DAT (SCH3114_RTR_ADDR + 0x71) +/* H/W Monitoring Ready/Lock/Start register. */ +#define SCH3114_HWM_RLS_REG (0x40) + +static void init(struct device *dev) +{ + /* SCH3114: enable hardware monitor. */ + printk(BIOS_INFO, "Enabling SCH3114 hardware monitor\n"); + outb(SCH3114_HWM_RLS_REG, SCH3114_RTR_HWM_IDX); + outb(inb(SCH3114_RTR_HWM_DAT) | 0x01, SCH3114_RTR_HWM_DAT); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/iei/pm_lx2_800_r10/romstage.c b/src/mainboard/iei/pm_lx2_800_r10/romstage.c new file mode 100644 index 0000000..a83bf7e --- /dev/null +++ b/src/mainboard/iei/pm_lx2_800_r10/romstage.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <spd.h> +#include <arch/io.h> +#include <arch/hlt.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/lxdef.h> +#include <southbridge/amd/cs5536/cs5536.h> +#include <southbridge/amd/cs5536/early_smbus.c> +#include <southbridge/amd/cs5536/early_setup.c> +#include <superio/smsc/smscsuperio/smscsuperio.h> +#include <northbridge/amd/lx/raminit.h> + +#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + /* Only DIMM0 is available. */ + if (device != DIMM0) + return 0xFF; + + return smbus_read_byte(device, address); +} + +#include <northbridge/amd/lx/pll_reset.c> +#include <lib/generic_sdram.c> +#include <cpu/amd/geode_lx/cpureginit.c> +#include <cpu/amd/geode_lx/syspreinit.c> +#include <cpu/amd/geode_lx/msrinit.c> + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Enable COM3. */ + device_t dev = PNP_DEV(0x2e, 0x0b); + u16 port = dev >> 8; + outb(0x55, port); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 4); + pnp_set_enable(dev, 1); + outb(0xaa, port); + + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); +} diff --git a/src/mainboard/iei/pm_lx_800_r11/Kconfig b/src/mainboard/iei/pm_lx_800_r11/Kconfig new file mode 100644 index 0000000..a3b686c --- /dev/null +++ b/src/mainboard/iei/pm_lx_800_r11/Kconfig @@ -0,0 +1,53 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +if BOARD_IEI_PM_LX_800_R11 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_WINBOND_W83627EHG + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266 + +config MAINBOARD_DIR + string + default iei/pm_lx_800_r11 + +config MAINBOARD_PART_NUMBER + string + default "PM-LX-800-R11" + +config IRQ_SLOT_COUNT + int + default 7 + +config PLLMSRlo + hex + default 0x07de0000 + +endif # BOARD_IEI_PM_LX_800_R11 diff --git a/src/mainboard/iei/pm_lx_800_r11/board_info.txt b/src/mainboard/iei/pm_lx_800_r11/board_info.txt new file mode 100644 index 0000000..f9a9fdb --- /dev/null +++ b/src/mainboard/iei/pm_lx_800_r11/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.ieiworld.com/product_groups/industrial/content.aspx?gid=000010000... +ROM package: PLCC +ROM protocol: LPC +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/iei/pm_lx_800_r11/devicetree.cb b/src/mainboard/iei/pm_lx_800_r11/devicetree.cb new file mode 100644 index 0000000..2bf4b7f --- /dev/null +++ b/src/mainboard/iei/pm_lx_800_r11/devicetree.cb @@ -0,0 +1,101 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Video Adapter + device pci 1.2 on end # AES Security Block + chip southbridge/amd/cs5536 + register "lpc_serirq_enable" = "0x0000115a" + register "lpc_serirq_polarity" = "0x0000eea5" + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0d0c0700" + register "enable_ide_nand_flash" = "0" + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" + register "com1_enable" = "1" # CN10 (RS422/486 COM3) + register "com1_address" = "0x3e8" + register "com1_irq" = "5" + register "com2_enable" = "0" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci e.0 on end # RTL8100C + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627ehg # Winbond W83627EHG + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + + device pnp 2e.5 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard + irq 0x72 = 12 # Mouse + end + + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + + device pnp 2e.6 off end # Serial Flash Interface + device pnp 2e.7 off end # GPIO1, GPIO6, Game Port & MIDI Port + device pnp 2e.8 off end # WDTO# & PLED + device pnp 2e.9 off end # GPIO2,GPIO3, GPIO4, GPIO5 & SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.106 off end # + device pnp 2e.107 off end # + device pnp 2e.207 off end # + + end + end + device pci f.2 on end # IDE Controller + device pci f.3 off end # Audio (N/A) + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/iei/pm_lx_800_r11/irq_tables.c b/src/mainboard/iei/pm_lx_800_r11/irq_tables.c new file mode 100644 index 0000000..66a3b70 --- /dev/null +++ b/src/mainboard/iei/pm_lx_800_r11/irq_tables.c @@ -0,0 +1,228 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/pci_ids.h> +#include <arch/pirq_routing.h> + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 11 +#define PIRQD 11 + +/* Links */ +#define L_PIRQA 1 +#define L_PIRQB 2 +#define L_PIRQC 3 +#define L_PIRQD 4 + +/* Bitmaps */ +#define B_LINK0 (1 << PIRQA) +#define B_LINK1 (1 << PIRQB) +#define B_LINK2 (1 << PIRQC) +#define B_LINK3 (1 << PIRQD) + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + 0x0f << 3, /* Interrupt router dev */ + B_LINK0 | B_LINK1 | B_LINK2 | B_LINK3, /* IRQs devoted exclusively to PCI usage */ + PCI_VENDOR_ID_AMD, /* Vendor */ + PCI_DEVICE_ID_AMD_CS5536_ISA, /* Device */ + 0, /* Miniport */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* Reserved */ + 0xa6, /* Checksum */ + { + [0] = { /* Host bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x01 << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [1] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [2] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + }, + [3] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + } + } + }, + + [1] = { /* ISA bridge */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0f << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [1] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [2] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + }, + [3] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + } + } + }, + + [2] = { /* Ethernet */ + .slot = 0x00, + .bus = 0x00, + .devfn = (0x0e << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [1] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [2] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [3] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + } + } + }, + + [3] = { /* PCI Connector - Slot 0 */ + .slot = 0x01, + .bus = 0x00, + .devfn = (0x09 << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [1] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [2] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + }, + [3] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + } + } + }, + + [4] = { /* PCI Connector - Slot 1 */ + .slot = 0x02, + .bus = 0x00, + .devfn = (0x0c << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [1] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + }, + [2] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [3] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + } + } + }, + + [5] = { /* PCI Connector - Slot 2 */ + .slot = 0x03, + .bus = 0x00, + .devfn = (0x0b << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + }, + [1] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [2] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [3] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + } + } + }, + + [6] = { /* PCI Connector - Slot 3 */ + .slot = 0x04, + .bus = 0x00, + .devfn = (0x0a << 3) | 0x0, + .irq = { + [0] = { + .link = L_PIRQD, + .bitmap = B_LINK3 + }, + [1] = { + .link = L_PIRQA, + .bitmap = B_LINK0 + }, + [2] = { + .link = L_PIRQB, + .bitmap = B_LINK1 + }, + [3] = { + .link = L_PIRQC, + .bitmap = B_LINK2 + } + } + } + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iei/pm_lx_800_r11/romstage.c b/src/mainboard/iei/pm_lx_800_r11/romstage.c new file mode 100644 index 0000000..ac68b1d --- /dev/null +++ b/src/mainboard/iei/pm_lx_800_r11/romstage.c @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2012 Ricardo Martins rasmartins@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <spd.h> +#include <arch/io.h> +#include <arch/hlt.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/lxdef.h> +#include <southbridge/amd/cs5536/cs5536.h> +#include <southbridge/amd/cs5536/early_smbus.c> +#include <southbridge/amd/cs5536/early_setup.c> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include <northbridge/amd/lx/raminit.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + /* Only DIMM0 is available. */ + if (device != DIMM0) + return 0xff; + + return smbus_read_byte(device, address); +} + +#include <northbridge/amd/lx/pll_reset.c> +#include <lib/generic_sdram.c> +#include <cpu/amd/geode_lx/cpureginit.c> +#include <cpu/amd/geode_lx/syspreinit.c> +#include <cpu/amd/geode_lx/msrinit.c> + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); +} diff --git a/src/mainboard/iei/rocky-512/Kconfig b/src/mainboard/iei/rocky-512/Kconfig deleted file mode 100644 index 864da86..0000000 --- a/src/mainboard/iei/rocky-512/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_IEI_ROCKY_512 - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "ROCKY-512" - -endif diff --git a/src/mainboard/iei/rocky-512/board_info.txt b/src/mainboard/iei/rocky-512/board_info.txt deleted file mode 100644 index 604bccf..0000000 --- a/src/mainboard/iei/rocky-512/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: half -Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=ROCKY-512 -Clone of: iei/juki-511p diff --git a/src/mainboard/iei/rocky_512/Kconfig b/src/mainboard/iei/rocky_512/Kconfig new file mode 100644 index 0000000..864da86 --- /dev/null +++ b/src/mainboard/iei/rocky_512/Kconfig @@ -0,0 +1,9 @@ +if BOARD_IEI_ROCKY_512 + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "ROCKY-512" + +endif diff --git a/src/mainboard/iei/rocky_512/board_info.txt b/src/mainboard/iei/rocky_512/board_info.txt new file mode 100644 index 0000000..dd811a6 --- /dev/null +++ b/src/mainboard/iei/rocky_512/board_info.txt @@ -0,0 +1,3 @@ +Category: half +Board URL: http://www.ieiworld.com/en/product_IPC.asp?model=ROCKY-512 +Clone of: iei/juki_511p diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/Kconfig b/src/mainboard/intel/3100_devkit_mt__arvon/Kconfig new file mode 100644 index 0000000..051113d --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/Kconfig @@ -0,0 +1,38 @@ +if BOARD_INTEL_3100_DEVKIT_MT__ARVON + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_MPGA479M + select NORTHBRIDGE_INTEL_I3100 + select SOUTHBRIDGE_INTEL_I3100 + select SUPERIO_INTEL_I3100 + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_2048 + +config MAINBOARD_DIR + string + default intel/3100_devkit_mt__arvon + +config MAINBOARD_PART_NUMBER + string + default "3100 devkit (Mt. Arvon)" + +config IRQ_SLOT_COUNT + int + default 1 + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config MAX_CPUS + int + default 4 + +endif # BOARD_INTEL_3100_DEVKIT_MT__ARVON diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/board_info.txt b/src/mainboard/intel/3100_devkit_mt__arvon/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/devicetree.cb b/src/mainboard/intel/3100_devkit_mt__arvon/devicetree.cb new file mode 100644 index 0000000..c1ff1d5 --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/devicetree.cb @@ -0,0 +1,45 @@ +chip northbridge/intel/i3100 + device domain 0 on + subsystemid 0x8086 0x2680 inherit + device pci 00.0 on end # IMCH + device pci 00.1 on end # IMCH error status + device pci 01.0 on end # IMCH EDMA engine + device pci 02.0 on end # PCIe port A/A0 + device pci 03.0 on end # PCIe port A1 + chip southbridge/intel/i3100 + # PIRQ line -> legacy IRQ mappings + register "pirq_a_d" = "0x0b070a05" + register "pirq_e_h" = "0x0a808080" + + device pci 1c.0 on end # PCIe port B0 + device pci 1c.1 on end # PCIe port B1 + device pci 1c.2 on end # PCIe port B2 + device pci 1c.3 on end # PCIe port B3 + device pci 1d.0 on end # USB (UHCI) 1 + device pci 1d.1 on end # USB (UHCI) 2 + device pci 1d.7 on end # USB (EHCI) + device pci 1e.0 on end # PCI bridge + device pci 1e.2 on end # audio + device pci 1e.3 on end # modem + device pci 1f.0 on # LPC bridge + chip superio/intel/i3100 + device pnp 4e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end + end + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + end + end + device cpu_cluster 0 on + chip cpu/intel/socket_mPGA479M + device lapic 0 on end + end + end +end diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/irq_tables.c b/src/mainboard/intel/3100_devkit_mt__arvon/irq_tables.c new file mode 100644 index 0000000..6f5b0a2 --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/irq_tables.c @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Arastra, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* u16 Table size 32+(16*devices) */ + 0x00, /* u8 Bus 0 */ + (0x1f << 3) | 0x0, /* u8 Device 1f, Function 0 */ + 0x0000, /* u16 reserve IRQ for PCI */ + 0x8086, /* u16 Vendor */ + 0x2670, /* Device ID */ + 0x00000000, /* u32 miniport_data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x49, /* u8 checksum - mod 256 checksum must give zero */ + { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, 0xf8, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/mptable.c b/src/mainboard/intel/3100_devkit_mt__arvon/mptable.c new file mode 100644 index 0000000..4dd13f9 --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/mptable.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Arastra, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This code is based on src/mainboard/intel/jarrell/mptable.c */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + u8 bus_pci = 6; + u8 bus_pcie_a = 1; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* IOAPIC handling */ + smp_write_ioapic(mc, 0x01, 0x20, IO_APIC_ADDR); + + mptable_add_isa_interrupts(mc, bus_isa, 0x1, 0); + + /* Standard local interrupt assignments */ + mptable_lintsrc(mc, bus_isa); + + /* Internal PCI devices */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x01<<2)|0, 0x01, 0x10); /* DMA controller */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x02<<2)|0, 0x01, 0x10); /* PCIe port A */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x03<<2)|0, 0x01, 0x10); /* PCIe port A1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1c<<2)|0, 0x01, 0x10); /* PCIe port B0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1c<<2)|1, 0x01, 0x11); /* PCIe port B1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1c<<2)|2, 0x01, 0x12); /* PCIe port B2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1c<<2)|3, 0x01, 0x13); /* PCIe port B3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1d<<2)|0, 0x01, 0x10); /* UHCI0/EHCI */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1d<<2)|1, 0x01, 0x11); /* UHCI1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1e<<2)|0, 0x01, 0x10); /* Audio */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1e<<2)|1, 0x01, 0x11); /* Modem */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1f<<2)|1, 0x01, 0x11); /* SATA/SMBus */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + 0, (0x1f<<2)|3, 0x01, 0x13); /* ? */ + + /* PCI slot */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pci, 0x00, 0x01, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pci, 0x01, 0x01, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pci, 0x02, 0x01, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pci, 0x03, 0x01, 0x13); + + /* PCIe port A slot */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pcie_a, 0x00, 0x01, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pcie_a, 0x01, 0x01, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pcie_a, 0x02, 0x01, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + bus_pcie_a, 0x03, 0x01, 0x13); + + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/intel/3100_devkit_mt__arvon/romstage.c b/src/mainboard/intel/3100_devkit_mt__arvon/romstage.c new file mode 100644 index 0000000..c1ee9bb --- /dev/null +++ b/src/mainboard/intel/3100_devkit_mt__arvon/romstage.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Arastra, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include "southbridge/intel/i3100/early_smbus.c" +#include "southbridge/intel/i3100/early_lpc.c" +#include "northbridge/intel/i3100/raminit.h" +#include "superio/intel/i3100/i3100.h" +#include "superio/intel/i3100/early_serial.c" +#include "northbridge/intel/i3100/memory_initialized.c" +#include "cpu/x86/bist.h" +#include <spd.h> + +#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0) +#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) + +#define SERIAL_DEV PNP_DEV(0x4e, I3100_SP1) + +static inline int spd_read_byte(u16 device, u8 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/i3100/raminit.c" +#include "lib/generic_sdram.c" +#if 0 /* skip_romstage doesn't compile with gcc */ +#include "arch/x86/lib/stages.c" +#endif + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + msr_t msr; + u16 perf; + static const struct mem_controller mch[] = { + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x00, 0), + .f1 = PCI_DEV(0, 0x00, 1), + .f2 = PCI_DEV(0, 0x00, 2), + .f3 = PCI_DEV(0, 0x00, 3), + .channel0 = { DIMM3, DIMM2, DIMM1, DIMM0 }, + .channel1 = { DIMM7, DIMM6, DIMM5, DIMM4 }, + } + }; + + if (bist == 0) { +#if 0 /* skip_romstage doesn't compile with gcc */ + /* Skip this if there was a built in self test failure */ + if (memory_initialized()) { + skip_romstage(); + } +#endif + } + + /* Set up the console */ + i3100_enable_superio(); + i3100_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + i3100_configure_uart_clk(SERIAL_DEV, I3100_UART_CLK_PREDIVIDE_26); + + console_init(); + + /* Prevent the TCO timer from rebooting us */ + i3100_halt_tco_timer(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* print_pci_devices(); */ + enable_smbus(); + /* dump_spd_registers(); */ + + /* Enable SpeedStep and automatic thermal throttling */ + /* FIXME: move to Pentium M init code */ + msr = rdmsr(0x1a0); + msr.lo |= (1 << 3) | (1 << 16); + wrmsr(0x1a0, msr); + msr = rdmsr(0x19d); + msr.lo |= (1 << 16); + wrmsr(0x19d, msr); + + /* Set CPU frequency/voltage to maximum */ + /* FIXME: move to Pentium M init code */ + msr = rdmsr(0x198); + perf = msr.hi & 0xffff; + msr = rdmsr(0x199); + msr.lo &= 0xffff0000; + msr.lo |= perf; + wrmsr(0x199, msr); + + sdram_initialize(ARRAY_SIZE(mch), mch); + /* dump_pci_devices(); */ + /* dump_pci_device(PCI_DEV(0, 0x00, 0)); */ + /* dump_bar14(PCI_DEV(0, 0x00, 0)); */ +} diff --git a/src/mainboard/intel/Kconfig b/src/mainboard/intel/Kconfig index d2dd7ce..c23b15a 100644 --- a/src/mainboard/intel/Kconfig +++ b/src/mainboard/intel/Kconfig @@ -3,11 +3,11 @@ if VENDOR_INTEL choice prompt "Mainboard model"
-config BOARD_INTEL_BAKERSPORT_FSP +config BOARD_INTEL_BAKERSPORT_CRB_FSP bool "Bakersport FSP-based CRB" -config BOARD_INTEL_BAYLEYBAY_FSP +config BOARD_INTEL_BAYLEY_BAY_CRB_FSP bool "Bayley Bay FSP-based CRB" -config BOARD_INTEL_COUGAR_CANYON2 +config BOARD_INTEL_COUGAR_CANYON_2 bool "Cougar Canyon 2 CRB" config BOARD_INTEL_D810E2CB bool "D810E2CB" @@ -15,15 +15,15 @@ config BOARD_INTEL_D945GCLF bool "D945GCLF" config BOARD_INTEL_EAGLEHEIGHTS bool "EagleHeights" -config BOARD_INTEL_EMERALDLAKE2 +config BOARD_INTEL_EMERALD_LAKE_2 bool "Emerald Lake 2 CRB" config BOARD_INTEL_JARRELL bool "Jarrell (SE7520JR2)" -config BOARD_INTEL_MINNOWMAX +config BOARD_INTEL_MINNOW_MAX bool "Minnow Max" -config BOARD_INTEL_MOHONPEAK +config BOARD_INTEL_MOHON_PEAK_CRB bool "Mohon Peak CRB" -config BOARD_INTEL_MTARVON +config BOARD_INTEL_3100_DEVKIT_MT__ARVON bool "3100 devkit (Mt. Arvon)" config BOARD_INTEL_TRUXTON bool "EP80579 devkit (Truxton)" @@ -31,26 +31,26 @@ config BOARD_INTEL_XE7501DEVKIT bool "XE7501devkit" config BOARD_INTEL_BASKING_RIDGE bool "Basking Ridge CRB" -config BOARD_INTEL_WTM2 +config BOARD_INTEL_WHITETIP_MOUNTAIN_2 bool "Whitetip Mountain 2 CRB"
endchoice
-source "src/mainboard/intel/bakersport_fsp/Kconfig" -source "src/mainboard/intel/bayleybay_fsp/Kconfig" -source "src/mainboard/intel/cougar_canyon2/Kconfig" +source "src/mainboard/intel/bakersport_crb_fsp/Kconfig" +source "src/mainboard/intel/bayley_bay_crb_fsp/Kconfig" +source "src/mainboard/intel/cougar_canyon_2/Kconfig" source "src/mainboard/intel/d810e2cb/Kconfig" source "src/mainboard/intel/d945gclf/Kconfig" source "src/mainboard/intel/eagleheights/Kconfig" -source "src/mainboard/intel/emeraldlake2/Kconfig" -source "src/mainboard/intel/baskingridge/Kconfig" +source "src/mainboard/intel/emerald_lake_2/Kconfig" +source "src/mainboard/intel/basking_ridge/Kconfig" source "src/mainboard/intel/jarrell/Kconfig" -source "src/mainboard/intel/minnowmax/Kconfig" -source "src/mainboard/intel/mohonpeak/Kconfig" -source "src/mainboard/intel/mtarvon/Kconfig" +source "src/mainboard/intel/minnow_max/Kconfig" +source "src/mainboard/intel/mohon_peak_crb/Kconfig" +source "src/mainboard/intel/3100_devkit_mt__arvon/Kconfig" source "src/mainboard/intel/truxton/Kconfig" source "src/mainboard/intel/xe7501devkit/Kconfig" -source "src/mainboard/intel/wtm2/Kconfig" +source "src/mainboard/intel/whitetip_mountain_2/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/intel/bakersport_crb_fsp/Kconfig b/src/mainboard/intel/bakersport_crb_fsp/Kconfig new file mode 100644 index 0000000..bef6c94 --- /dev/null +++ b/src/mainboard/intel/bakersport_crb_fsp/Kconfig @@ -0,0 +1,103 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_INTEL_BAKERSPORT_CRB_FSP + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SOC_INTEL_FSP_BAYTRAIL + select BOARD_ROMSIZE_KB_2048 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select OVERRIDE_MRC_CACHE_LOC + select POST_IO + select INCLUDE_MICROCODE_IN_BUILD if FSP_PACKAGE_DEFAULT + select ENABLE_BUILTIN_COM1 if FSP_PACKAGE_DEFAULT + select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT + select DEFAULT_CONSOLE_LOGLEVEL_7 if FSP_PACKAGE_DEFAULT + select TSC_MONOTONIC_TIMER + +config MAINBOARD_DIR + string + default "intel/bayley_bay_crb_fsp" + +config INCLUDE_ME + bool + default n + +config LOCK_MANAGEMENT_ENGINE + bool + default n + +config MAINBOARD_PART_NUMBER + string + default "Bakersport CRB (FSP)" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config CACHE_ROM_SIZE_OVERRIDE + hex + default 0x800000 + +config FSP_FILE + string + default "../intel/fsp/baytrail/BAYTRAIL_FSP_ECC.fd" + +config MRC_CACHE_LOC_OVERRIDE + hex + default 0xfff80000 + depends on ENABLE_FSP_FAST_BOOT + +config CBFS_SIZE + hex + default 0x00200000 + +config DRIVERS_PS2_KEYBOARD + bool + default n + +config CONSOLE_POST + bool + default y + +config ENABLE_FSP_FAST_BOOT + bool + depends on HAVE_FSP_BIN + default y + +config VIRTUAL_ROM_SIZE + hex + depends on ENABLE_FSP_FAST_BOOT + default 0x800000 + +config FSP_PACKAGE_DEFAULT + bool "Configure defaults for the Intel FSP package" + default n + +config VGA_BIOS + bool + default y if FSP_PACKAGE_DEFAULT + +endif # BOARD_INTEL_BAKERSPORT_CRB_FSP diff --git a/src/mainboard/intel/bakersport_crb_fsp/board_info.txt b/src/mainboard/intel/bakersport_crb_fsp/board_info.txt new file mode 100644 index 0000000..8527d41 --- /dev/null +++ b/src/mainboard/intel/bakersport_crb_fsp/board_info.txt @@ -0,0 +1,4 @@ +Board name: Bakersport +Category: eval +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/intel/bakersport_fsp/Kconfig b/src/mainboard/intel/bakersport_fsp/Kconfig deleted file mode 100644 index 567889d..0000000 --- a/src/mainboard/intel/bakersport_fsp/Kconfig +++ /dev/null @@ -1,103 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_INTEL_BAKERSPORT_FSP - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SOC_INTEL_FSP_BAYTRAIL - select BOARD_ROMSIZE_KB_2048 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select OVERRIDE_MRC_CACHE_LOC - select POST_IO - select INCLUDE_MICROCODE_IN_BUILD if FSP_PACKAGE_DEFAULT - select ENABLE_BUILTIN_COM1 if FSP_PACKAGE_DEFAULT - select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT - select DEFAULT_CONSOLE_LOGLEVEL_7 if FSP_PACKAGE_DEFAULT - select TSC_MONOTONIC_TIMER - -config MAINBOARD_DIR - string - default "intel/bayleybay_fsp" - -config INCLUDE_ME - bool - default n - -config LOCK_MANAGEMENT_ENGINE - bool - default n - -config MAINBOARD_PART_NUMBER - string - default "Bakersport CRB (FSP)" - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config CACHE_ROM_SIZE_OVERRIDE - hex - default 0x800000 - -config FSP_FILE - string - default "../intel/fsp/baytrail/BAYTRAIL_FSP_ECC.fd" if BOARD_INTEL_BAKERSPORT_FSP - -config MRC_CACHE_LOC_OVERRIDE - hex - default 0xfff80000 - depends on ENABLE_FSP_FAST_BOOT - -config CBFS_SIZE - hex - default 0x00200000 - -config DRIVERS_PS2_KEYBOARD - bool - default n - -config CONSOLE_POST - bool - default y - -config ENABLE_FSP_FAST_BOOT - bool - depends on HAVE_FSP_BIN - default y - -config VIRTUAL_ROM_SIZE - hex - depends on ENABLE_FSP_FAST_BOOT - default 0x800000 - -config FSP_PACKAGE_DEFAULT - bool "Configure defaults for the Intel FSP package" - default n - -config VGA_BIOS - bool - default y if FSP_PACKAGE_DEFAULT - -endif # BOARD_INTEL_BAKERSPORT_FSP diff --git a/src/mainboard/intel/bakersport_fsp/board_info.txt b/src/mainboard/intel/bakersport_fsp/board_info.txt deleted file mode 100644 index 8527d41..0000000 --- a/src/mainboard/intel/bakersport_fsp/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Bakersport -Category: eval -ROM protocol: SPI -ROM socketed: n diff --git a/src/mainboard/intel/basking_ridge/Kconfig b/src/mainboard/intel/basking_ridge/Kconfig new file mode 100644 index 0000000..040ad2b --- /dev/null +++ b/src/mainboard/intel/basking_ridge/Kconfig @@ -0,0 +1,49 @@ +if BOARD_INTEL_BASKING_RIDGE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_HASWELL + select SOUTHBRIDGE_INTEL_LYNXPOINT + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select MAINBOARD_HAS_CHROMEOS + select MONOTONIC_TIMER_MSR + select INTEL_INT15 + +config MAINBOARD_DIR + string + default intel/basking_ridge + +config MAINBOARD_PART_NUMBER + string + default "BASKING RIDGE" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +endif # BOARD_INTEL_BASKING_RIDGE diff --git a/src/mainboard/intel/basking_ridge/Makefile.inc b/src/mainboard/intel/basking_ridge/Makefile.inc new file mode 100644 index 0000000..b215ad7 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +romstage-y += chromeos.c +ramstage-y += chromeos.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c diff --git a/src/mainboard/intel/basking_ridge/acpi/chromeos.asl b/src/mainboard/intel/basking_ridge/acpi/chromeos.asl new file mode 100644 index 0000000..da4fb40 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/chromeos.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(OIPG, Package() { + Package () { 0x0001, 1, 69, "LynxPoint" }, // recovery + Package () { 0x0002, 0, 48, "LynxPoint" }, // developer + Package () { 0x0003, 0, 22, "LynxPoint" }, // firmware write protect +}) diff --git a/src/mainboard/intel/basking_ridge/acpi/ec.asl b/src/mainboard/intel/basking_ridge/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/basking_ridge/acpi/haswell_pci_irqs.asl b/src/mainboard/intel/basking_ridge/acpi/haswell_pci_irqs.asl new file mode 100644 index 0000000..f679733 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/haswell_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for IvyBridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/basking_ridge/acpi/mainboard.asl b/src/mainboard/intel/basking_ridge/acpi/mainboard.asl new file mode 100644 index 0000000..6b15331 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x05}) +} diff --git a/src/mainboard/intel/basking_ridge/acpi/platform.asl b/src/mainboard/intel/basking_ridge/acpi/platform.asl new file mode 100644 index 0000000..8e9a663 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/platform.asl @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/intel/basking_ridge/acpi/superio.asl b/src/mainboard/intel/basking_ridge/acpi/superio.asl new file mode 100644 index 0000000..a50c4b3 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/superio.asl @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Values should match those defined in devicetree.cb */ + +#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller +#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR + +#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard +#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse +#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 +#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller +#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 +#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 +#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO +#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 +#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 + +#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/basking_ridge/acpi/thermal.asl b/src/mainboard/intel/basking_ridge/acpi/thermal.asl new file mode 100644 index 0000000..8025366 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi/thermal.asl @@ -0,0 +1,255 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 0 seconds + Name (_TZP, 0) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + Return (CTOK (50)) + } + + Method (_AC0) { + If (LLessEqual (\FLVL, 0)) { + Return (CTOK (\F0OF)) + } Else { + Return (CTOK (\F0ON)) + } + } + + Method (_AC1) { + If (LLessEqual (\FLVL, 1)) { + Return (CTOK (\F1OF)) + } Else { + Return (CTOK (\F1ON)) + } + } + + Method (_AC2) { + If (LLessEqual (\FLVL, 2)) { + Return (CTOK (\F2OF)) + } Else { + Return (CTOK (\F2ON)) + } + } + + Method (_AC3) { + If (LLessEqual (\FLVL, 3)) { + Return (CTOK (\F3OF)) + } Else { + Return (CTOK (\F3ON)) + } + } + + Method (_AC4) { + If (LLessEqual (\FLVL, 4)) { + Return (CTOK (\F4OF)) + } Else { + Return (CTOK (\F4ON)) + } + } + + Name (_AL0, Package () { FAN0 }) + Name (_AL1, Package () { FAN1 }) + Name (_AL2, Package () { FAN2 }) + Name (_AL3, Package () { FAN3 }) + Name (_AL4, Package () { FAN4 }) + + PowerResource (FNP0, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 0)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (0, \FLVL) + Store (\F0PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (1, \FLVL) + Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP1, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 1)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (1, \FLVL) + Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (2, \FLVL) + Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP2, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 2)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (2, \FLVL) + Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (3, \FLVL) + Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP3, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 3)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (3, \FLVL) + Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP4, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 4)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + Device (FAN0) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 0) + Name (_PR0, Package () { FNP0 }) + } + + Device (FAN1) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 1) + Name (_PR0, Package () { FNP1 }) + } + + Device (FAN2) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 2) + Name (_PR0, Package () { FNP2 }) + } + + Device (FAN3) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 3) + Name (_PR0, Package () { FNP3 }) + } + + Device (FAN4) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 4) + Name (_PR0, Package () { FNP4 }) + } + } +} diff --git a/src/mainboard/intel/basking_ridge/acpi_tables.c b/src/mainboard/intel/basking_ridge/acpi_tables.c new file mode 100644 index 0000000..d5a5f03 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/acpi_tables.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> + +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->f4of = FAN4_THRESHOLD_OFF; + gnvs->f4on = FAN4_THRESHOLD_ON; + gnvs->f4pw = FAN4_PWM; + + gnvs->f3of = FAN3_THRESHOLD_OFF; + gnvs->f3on = FAN3_THRESHOLD_ON; + gnvs->f3pw = FAN3_PWM; + + gnvs->f2of = FAN2_THRESHOLD_OFF; + gnvs->f2on = FAN2_THRESHOLD_ON; + gnvs->f2pw = FAN2_PWM; + + gnvs->f1of = FAN1_THRESHOLD_OFF; + gnvs->f1on = FAN1_THRESHOLD_ON; + gnvs->f1pw = FAN1_PWM; + + gnvs->f0of = FAN0_THRESHOLD_OFF; + gnvs->f0on = FAN0_THRESHOLD_ON; + gnvs->f0pw = FAN0_PWM; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* + * Enable Front USB ports in S5 by default + * to be consistent with back port behavior + */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + /* TPM Present */ + gnvs->tpmp = 1; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + +#if CONFIG_CHROMEOS + /* Emerald Lake has no EC (?) */ + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; +#endif + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/intel/basking_ridge/board_info.txt b/src/mainboard/intel/basking_ridge/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/intel/basking_ridge/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/intel/basking_ridge/chromeos.c b/src/mainboard/intel/basking_ridge/chromeos.c new file mode 100644 index 0000000..c1cea63 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/chromeos.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <bootmode.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/gpio.h> + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return; + + u32 gp_lvl = inl(gpio_base + GP_LVL); + u32 gp_lvl2 = inl(gpio_base + GP_LVL2); + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + /* Write Protect: GPIO22 */ + gpios->gpios[0].port = 0; + gpios->gpios[0].polarity = ACTIVE_LOW; + gpios->gpios[0].value = (gp_lvl >> 22) & 1; + strncpy((char *)gpios->gpios[0].name,"write protect", + GPIO_MAX_NAME_LENGTH); + + /* Recovery: GPIO69 - SV_DETECT - J8E3 (silkscreen: J8E2) */ + gpios->gpios[1].port = 69; + gpios->gpios[1].polarity = ACTIVE_HIGH; + gpios->gpios[1].value = (gp_lvl3 >> (69-64)) & 1; + strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); + + /* Developer: GPIO48 - BIOS_RESP - J8E4 (silkscreen: J8E3) */ + gpios->gpios[2].port = 48; + gpios->gpios[2].polarity = ACTIVE_LOW; + gpios->gpios[2].value = (gp_lvl2 >> (48-32)) & 1; + strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); + + /* Hard code the lid switch GPIO to open. */ + gpios->gpios[3].port = -1; + gpios->gpios[3].polarity = ACTIVE_HIGH; + gpios->gpios[3].value = 1; + strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); + + /* Power Button */ + gpios->gpios[4].port = -1; + gpios->gpios[4].polarity = ACTIVE_HIGH; + gpios->gpios[4].value = 0; + strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); + + /* Did we load the VGA option ROM? */ + gpios->gpios[5].port = -1; + gpios->gpios[5].polarity = ACTIVE_HIGH; + gpios->gpios[5].value = gfx_get_init_done(); + strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); +} +#endif + +int get_developer_mode_switch(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + u32 gp_lvl2 = inl(gpio_base + GP_LVL2); + + /* + * Developer: GPIO48, Connected to J8E4, however the silkscreen says + * J8E3. The jumper is active low. + */ + return !((gp_lvl2 >> (48-32)) & 1); +} + +int get_recovery_mode_switch(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + u32 gp_lvl3 = inl(gpio_base + GP_LVL3); + + /* + * Recovery: GPIO69, Connected to J8E3, however the silkscreen says + * J8E2. The jump is active high. + */ + return (gp_lvl3 >> (69-64)) & 1; +} + +int get_write_protect_state(void) +{ + return 0; +} diff --git a/src/mainboard/intel/basking_ridge/cmos.layout b/src/mainboard/intel/basking_ridge/cmos.layout new file mode 100644 index 0000000..24e38cd --- /dev/null +++ b/src/mainboard/intel/basking_ridge/cmos.layout @@ -0,0 +1,133 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/basking_ridge/devicetree.cb b/src/mainboard/intel/basking_ridge/devicetree.cb new file mode 100644 index 0000000..a173aaa --- /dev/null +++ b/src/mainboard/intel/basking_ridge/devicetree.cb @@ -0,0 +1,84 @@ +chip northbridge/intel/haswell + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/haswell + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "1" + register "gpi14_routing" = "2" + register "alt_gp_smi_en" = "0x0000" + register "gpe0_en_1" = "0x4000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x3f" + + # SuperIO range is 0x700-0x73f + register "gen2_dec" = "0x003c0701" + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 (WLAN) + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 (Debug) + device pci 1c.3 on end # PCIe Port #4 (LAN) + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/intel/basking_ridge/dsdt.asl b/src/mainboard/intel/basking_ridge/dsdt.asl new file mode 100644 index 0000000..8746e02 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/dsdt.asl @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ENABLE_TPM + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include "../../../cpu/intel/haswell/acpi/cpu.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/haswell/acpi/haswell.asl> + #include <southbridge/intel/lynxpoint/acpi/pch.asl> + } + } + + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + /* Chipset specific sleep states */ + #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/basking_ridge/fadt.c b/src/mainboard/intel/basking_ridge/fadt.c new file mode 100644 index 0000000..315cb58 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/fadt.c @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_DESKTOP; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/intel/basking_ridge/gpio.h b/src/mainboard/intel/basking_ridge/gpio.h new file mode 100644 index 0000000..d271644 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/gpio.h @@ -0,0 +1,247 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BASKING_RIDGE_GPIO_H +#define BASKING_RIDGE_GPIO_H + +#include "southbridge/intel/lynxpoint/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, /* PCH_GPIO0_R -> S_GPIO -> J9F4 */ + .gpio1 = GPIO_MODE_GPIO, /* SMC_EXTSMI_N */ + .gpio2 = GPIO_MODE_GPIO, /* TP_RSVD_TESTMODE - float */ + .gpio3 = GPIO_MODE_NATIVE, /* PCH_PCI_IRQ_N -> SIO GPIO12/SMI# */ + .gpio4 = GPIO_MODE_GPIO, /* EXTTS_SNI_DRV0_PCH - float */ + .gpio5 = GPIO_MODE_GPIO, /* EXTTS_SNI_DRV1_PCH - float */ + .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR_N */ + .gpio7 = GPIO_MODE_GPIO, /* SMC_RUNTIME_SCI_N */ + .gpio8 = GPIO_MODE_GPIO, /* PCH_GPIO8 -> DDR Voltage Select Bit 0 */ + .gpio9 = GPIO_MODE_NATIVE, /* USB_OC_10_11_R_N */ + .gpio10 = GPIO_MODE_NATIVE, /* USB_OC_12_13_R_N */ + .gpio11 = GPIO_MODE_GPIO, /* PCH_GPIO11 -> HOST_ALERT2_N -> PCIE_RSVD_2_N (3GIO_X1) slot 4 */ + .gpio12 = GPIO_MODE_GPIO, /* PM_LANPHY_ENABLE */ + .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST_N */ + .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE_SCI_N (not stuffed) & USB_8_9_PWR */ + .gpio15 = GPIO_MODE_GPIO, /* Always GPIO: HOST_ALERT1_R_N -> PCIE_RSV_1_N */ + .gpio16 = GPIO_MODE_NATIVE, /* SATA_DET4_R_N */ + .gpio17 = GPIO_MODE_GPIO, /* DGPU_PWROK */ + .gpio18 = GPIO_MODE_NATIVE, /* CK_SLOT1_OE_N_R */ + .gpio19 = GPIO_MODE_GPIO, /* BBS_BIT0_R - STRAP */ + .gpio20 = GPIO_MODE_NATIVE, /* CK_SLOT2_OE_N_R */ + .gpio21 = GPIO_MODE_GPIO, /* SATA_DET0_R_N -> J9H4 */ + .gpio22 = GPIO_MODE_GPIO, /* BIOS_REC -> J8G1 */ + .gpio23 = GPIO_MODE_NATIVE, /* PCH_DRQ1_N */ + .gpio24 = GPIO_MODE_GPIO, /* Always GPIO: PCH_GPIO24_R1 -> DDR Voltage Select Bit 2 */ + .gpio25 = GPIO_MODE_NATIVE, /* CK_SLOT3_OE_N */ + .gpio26 = GPIO_MODE_NATIVE, /* CK_SLOT4_OE_N */ + .gpio27 = GPIO_MODE_GPIO, /* Always GPIO: PCH_GPIO_27 -> SMC_WAKE_SCI_N & LANWAKE_N */ + .gpio28 = GPIO_MODE_GPIO, /* Always GPIO: PLL_ODVR_EN -> PCH_AUDIO_PWR_N */ + .gpio29 = GPIO_MODE_NATIVE, /* PCH_SLP_WLAN_N */ + .gpio30 = GPIO_MODE_NATIVE, /* SUS_PWR_ACK_R */ + .gpio31 = GPIO_MODE_NATIVE, /* AC_PRESENT_R */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_OUTPUT, + /* .gpio3 NATIVE */ + .gpio4 = GPIO_DIR_OUTPUT, + .gpio5 = GPIO_DIR_OUTPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + /* .gpio10 NATIVE */ + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + /* .gpio13 NATIVE */ + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + /* .gpio16 NATIVE */ + .gpio17 = GPIO_DIR_INPUT, + /* .gpio18 NATIVE */ + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + /* .gpio23 NATIVE */ + .gpio24 = GPIO_DIR_OUTPUT, + /* .gpio25 NATIVE */ + /* .gpio26 NATIVE */ + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + /* .gpio29 NATIVE */ + /* .gpio30 NATIVE */ + /* .gpio31 NATIVE */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio2 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_LOW, + .gpio24 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, /* Always GPIO on desktop. Mobile Native. PM_CLKRUN_N */ + .gpio33 = GPIO_MODE_NATIVE, /* HDADOCKEN_R_N */ + .gpio34 = GPIO_MODE_GPIO, /* PCH_GPIO34 -> SATA_PWR_EN0_N */ + .gpio35 = GPIO_MODE_GPIO, /* SATA_PWR_EN1_R_N */ + .gpio36 = GPIO_MODE_NATIVE, /* SATA_ODD_PRSNT_R_N */ + .gpio37 = GPIO_MODE_NATIVE, /* SATA_ODD_DA_N_R */ + .gpio38 = GPIO_MODE_GPIO, /* MFG_MODE */ + .gpio39 = GPIO_MODE_GPIO, /* GFX_CRB_DET */ + .gpio40 = GPIO_MODE_NATIVE, /* USB_OC_2_5_R_N */ + .gpio41 = GPIO_MODE_GPIO, /* USB_0_1_PWR */ + .gpio42 = GPIO_MODE_NATIVE, /* USB_OC_6_7_R_N */ + .gpio43 = GPIO_MODE_NATIVE, /* USB_OSC_8_9_R_N */ + .gpio44 = GPIO_MODE_NATIVE, /* CK_SLOT5_OE_N */ + .gpio45 = GPIO_MODE_NATIVE, /* CK_PCIE_LAN_REQ_N */ + .gpio46 = GPIO_MODE_GPIO, /* PCH_GPIO46_R -> DDR Voltage Select Bit 1 */ + .gpio47 = GPIO_MODE_NATIVE, /* PEGA_CKREQ_N */ + .gpio48 = GPIO_MODE_GPIO, /* BIOS_RESP -> J8E3 */ + .gpio49 = GPIO_MODE_GPIO, /* PCH_GP_49 -> CRIT_TEMP_REP_N */ + .gpio50 = GPIO_MODE_GPIO, /* DGPU_HOLD_RST_N */ + .gpio51 = GPIO_MODE_GPIO, /* BBS_BIT1 Strap */ + .gpio52 = GPIO_MODE_GPIO, /* DGPU_SELECT_N */ + .gpio53 = GPIO_MODE_GPIO, /* DGPU_PWM_SELECT_N -> PEG_JTAG5 */ + .gpio54 = GPIO_MODE_GPIO, /* DGPU_PWR_EN_N -> PEG_RSVD5 */ + .gpio55 = GPIO_MODE_GPIO, /* STP_A16OVR Strap */ + .gpio56 = GPIO_MODE_NATIVE, /* MC_CKREQ_N */ + .gpio57 = GPIO_MODE_GPIO, /* Always GPIO. NFC_IRQ_R */ + .gpio58 = GPIO_MODE_NATIVE, /* SML1_CK */ + .gpio59 = GPIO_MODE_NATIVE, /* USB_OC_0_1_R_N */ + .gpio60 = GPIO_MODE_GPIO, /* DRAMRST_CNTRL_PCH */ + .gpio61 = GPIO_MODE_NATIVE, /* PM_SUS_STAT_N */ + .gpio62 = GPIO_MODE_NATIVE, /* SUS_CK */ + .gpio63 = GPIO_MODE_NATIVE, /* SLP_S5_R_N */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + /* .gpio32 NATIVE */ + /* .gpio33 NATIVE */ + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + /* .gpio36 NATIVE */ + /* .gpio37 NATIVE */ + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + /* .gpio40 NATIVE */ + .gpio41 = GPIO_DIR_OUTPUT, + /* .gpio42 NATIVE */ + /* .gpio43 NATIVE */ + /* .gpio44 NATIVE */ + /* .gpio45 NATIVE */ + .gpio46 = GPIO_DIR_OUTPUT, + /* .gpio47 NATIVE */ + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + /* .gpio56 NATIVE */ + .gpio57 = GPIO_DIR_INPUT, + /* .gpio58 NATIVE */ + /* .gpio59 NATIVE */ + .gpio60 = GPIO_DIR_OUTPUT, + /* .gpio61 NATIVE */ + /* .gpio62 NATIVE */ + /* .gpio63 NATIVE */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio34 = GPIO_LEVEL_LOW, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_LOW, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_LOW, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, /* CK_PCH_SIO_DOCK_R -> TP_CK_PCI_SIO_DOCK */ + .gpio65 = GPIO_MODE_NATIVE, /* CK_FLEX1 */ + .gpio66 = GPIO_MODE_GPIO, /* CK_FLEX2 */ + .gpio67 = GPIO_MODE_GPIO, /* DGPU_PRSNT_N -> PEG_RSVD3 */ + .gpio68 = GPIO_MODE_GPIO, /* SATA_ODD_PWRGT */ + .gpio69 = GPIO_MODE_GPIO, /* SV_DET -> J8E2 */ + .gpio70 = GPIO_MODE_GPIO, /* USB3_DET_P2_N */ + .gpio71 = GPIO_MODE_GPIO, /* USB3_DET_P3_N */ + .gpio72 = GPIO_MODE_NATIVE, /* PM_BATLOW_R_N */ + .gpio73 = GPIO_MODE_NATIVE, /* CK_REQ_DOCK_N */ + .gpio74 = GPIO_MODE_NATIVE, /* PCH_GPIO74_R -> AMB_THM2_R_N (PCHHOT) */ + .gpio75 = GPIO_MODE_NATIVE, /* SM1_DATA */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + /* .gpio65 NATIVE */ + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + /* .gpio72 NATIVE */ + /* .gpio73 NATIVE */ + /* .gpio74 NATIVE */ + /* .gpio75 NATIVE */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; + +#endif diff --git a/src/mainboard/intel/basking_ridge/hda_verb.c b/src/mainboard/intel/basking_ridge/hda_verb.c new file mode 100644 index 0000000..96770de --- /dev/null +++ b/src/mainboard/intel/basking_ridge/hda_verb.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 + 0x10134210, // Subsystem ID + 0x00000007, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ + AZALIA_SUBVENDOR(0x0, 0x10134210), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), + + /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ + AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), + + /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), + + /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), + + /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), + + /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), + + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/basking_ridge/mainboard.c b/src/mainboard/intel/basking_ridge/mainboard.c new file mode 100644 index 0000000..a6839fc --- /dev/null +++ b/src/mainboard/intel/basking_ridge/mainboard.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/lynxpoint/pch.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/basking_ridge/mainboard_smi.c b/src/mainboard/intel/basking_ridge/mainboard_smi.c new file mode 100644 index 0000000..f24af67 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/mainboard_smi.c @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/me.h> +#include <northbridge/intel/haswell/haswell.h> +#include <cpu/intel/haswell/haswell.h> + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +/* + * Change LED_POWER# (SIO GPIO 45) state based on sleep type. + * The IO address is hardcoded as we don't have device path in SMM. + */ +#define SIO_GPIO_BASE_SET4 (0x730 + 3) +#define SIO_GPIO_BLINK_GPIO45 0x25 +void mainboard_smi_sleep(u8 slp_typ) +{ + u8 reg8; + + switch (slp_typ) { + case SLP_TYP_S3: + case SLP_TYP_S4: + break; + + case SLP_TYP_S5: + /* Turn off LED */ + reg8 = inb(SIO_GPIO_BASE_SET4); + reg8 |= (1 << 5); + outb(reg8, SIO_GPIO_BASE_SET4); + break; + } +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APMC_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_pch_finalize_smm(); + intel_northbridge_haswell_finalize_smm(); + intel_cpu_haswell_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/intel/basking_ridge/onboard.h b/src/mainboard/intel/basking_ridge/onboard.h new file mode 100644 index 0000000..52f53e0 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/onboard.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef LUMPY_ONBOARD_H +#define LUMPY_ONBOARD_H + +#include <arch/smp/mpspec.h> + +#define LUMPY_LIGHTSENSOR_NAME "lightsensor" +#define LUMPY_LIGHTSENSOR_I2C_ADDR 0x44 +#define LUMPY_LIGHTSENSOR_GSI 20 +#define LUMPY_LIGHTSENSOR_IRQ 14 +#define LUMPY_LIGHTSENSOR_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) + +#define LUMPY_TRACKPAD_NAME "trackpad" +#define LUMPY_TRACKPAD_I2C_ADDR 0x67 +#define LUMPY_TRACKPAD_GSI 21 +#define LUMPY_TRACKPAD_IRQ 15 +#define LUMPY_TRACKPAD_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) + +#endif diff --git a/src/mainboard/intel/basking_ridge/romstage.c b/src/mainboard/intel/basking_ridge/romstage.c new file mode 100644 index 0000000..e02ae7a --- /dev/null +++ b/src/mainboard/intel/basking_ridge/romstage.c @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stddef.h> +#include <console/console.h> +#include "cpu/intel/haswell/haswell.h" +#include "northbridge/intel/haswell/haswell.h" +#include "northbridge/intel/haswell/raminit.h" +#include "southbridge/intel/lynxpoint/pch.h" +#include "gpio.h" + +const struct rcba_config_instruction rcba_config[] = { + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D30IP, (NOINT << D30IP_PIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)), + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)), + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)), + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)), + RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), + RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = DEFAULT_MCHBAR, + .dmibar = DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 0, // 0 Mobile, 1 Desktop/Server + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, + .ec_present = 0, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 0, + .dimm_channel1_disabled = 0, + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn#, Location */ + { 0x0040, 1, 0, /* P0: Back USB3 port (OC0) */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 0, /* P1: Back USB3 port (OC0) */ + USB_PORT_BACK_PANEL }, + { 0x0040, 1, 1, /* P2: Flex Port on bottom (OC1) */ + USB_PORT_FLEX }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: Dock connector */ + USB_PORT_DOCK }, + { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: Mini PCIE */ + USB_PORT_MINI_PCIE }, + { 0x0040, 1, 1, /* P5: USB eSATA header (OC1) */ + USB_PORT_FLEX }, + { 0x0040, 1, 3, /* P6: Front Header J8H2 (OC3) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 3, /* P7: Front Header J8H2 (OC3) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 4, /* P8: USB/LAN Jack (OC4) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 4, /* P9: USB/LAN Jack (OC4) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 5, /* P10: Front Header J7H3 (OC5) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 5, /* P11: Front Header J7H3 (OC5) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 6, /* P12: USB/DP Jack (OC6) */ + USB_PORT_FRONT_PANEL }, + { 0x0040, 1, 6, /* P13: USB/DP Jack (OC6) */ + USB_PORT_FRONT_PANEL }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, 0 }, /* P1; */ + { 1, 0 }, /* P2; */ + { 1, 0 }, /* P3; */ + { 1, 0 }, /* P4; */ + { 1, 0 }, /* P6; */ + { 1, 0 }, /* P6; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = NULL, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/intel/basking_ridge/thermal.h b/src/mainboard/intel/basking_ridge/thermal.h new file mode 100644 index 0000000..d8c0025 --- /dev/null +++ b/src/mainboard/intel/basking_ridge/thermal.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef BASKING_RIDGE_THERMAL_H +#define BASKING_RIDGE_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 +#define FAN4_PWM 0x00 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 48 +#define FAN3_THRESHOLD_ON 55 +#define FAN3_PWM 0x40 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 52 +#define FAN2_THRESHOLD_ON 64 +#define FAN2_PWM 0x80 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 60 +#define FAN1_THRESHOLD_ON 68 +#define FAN1_PWM 0xb0 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 66 +#define FAN0_THRESHOLD_ON 78 +#define FAN0_PWM 0xff + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/intel/baskingridge/Kconfig b/src/mainboard/intel/baskingridge/Kconfig deleted file mode 100644 index 512591e..0000000 --- a/src/mainboard/intel/baskingridge/Kconfig +++ /dev/null @@ -1,49 +0,0 @@ -if BOARD_INTEL_BASKING_RIDGE - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_HASWELL - select SOUTHBRIDGE_INTEL_LYNXPOINT - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select MAINBOARD_HAS_CHROMEOS - select MONOTONIC_TIMER_MSR - select INTEL_INT15 - -config MAINBOARD_DIR - string - default intel/baskingridge - -config MAINBOARD_PART_NUMBER - string - default "BASKING RIDGE" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config VGA_BIOS_FILE - string - default "pci8086,0166.rom" - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -endif # BOARD_INTEL_BASKING_RIDGE diff --git a/src/mainboard/intel/baskingridge/Makefile.inc b/src/mainboard/intel/baskingridge/Makefile.inc deleted file mode 100644 index b215ad7..0000000 --- a/src/mainboard/intel/baskingridge/Makefile.inc +++ /dev/null @@ -1,23 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -romstage-y += chromeos.c -ramstage-y += chromeos.c - -smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c diff --git a/src/mainboard/intel/baskingridge/acpi/chromeos.asl b/src/mainboard/intel/baskingridge/acpi/chromeos.asl deleted file mode 100644 index da4fb40..0000000 --- a/src/mainboard/intel/baskingridge/acpi/chromeos.asl +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Name(OIPG, Package() { - Package () { 0x0001, 1, 69, "LynxPoint" }, // recovery - Package () { 0x0002, 0, 48, "LynxPoint" }, // developer - Package () { 0x0003, 0, 22, "LynxPoint" }, // firmware write protect -}) diff --git a/src/mainboard/intel/baskingridge/acpi/ec.asl b/src/mainboard/intel/baskingridge/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/baskingridge/acpi/haswell_pci_irqs.asl b/src/mainboard/intel/baskingridge/acpi/haswell_pci_irqs.asl deleted file mode 100644 index f679733..0000000 --- a/src/mainboard/intel/baskingridge/acpi/haswell_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for IvyBridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 20 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/baskingridge/acpi/mainboard.asl b/src/mainboard/intel/baskingridge/acpi/mainboard.asl deleted file mode 100644 index 6b15331..0000000 --- a/src/mainboard/intel/baskingridge/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake - Name(_PRW, Package(){0x1d, 0x05}) -} diff --git a/src/mainboard/intel/baskingridge/acpi/platform.asl b/src/mainboard/intel/baskingridge/acpi/platform.asl deleted file mode 100644 index 8e9a663..0000000 --- a/src/mainboard/intel/baskingridge/acpi/platform.asl +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/intel/baskingridge/acpi/superio.asl b/src/mainboard/intel/baskingridge/acpi/superio.asl deleted file mode 100644 index a50c4b3..0000000 --- a/src/mainboard/intel/baskingridge/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Values should match those defined in devicetree.cb */ - -#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller -#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR - -#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard -#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse -#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 -#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller -#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 -#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 -#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO -#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 -#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 - -#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/baskingridge/acpi/thermal.asl b/src/mainboard/intel/baskingridge/acpi/thermal.asl deleted file mode 100644 index 8025366..0000000 --- a/src/mainboard/intel/baskingridge/acpi/thermal.asl +++ /dev/null @@ -1,255 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - Name (_TC1, 0x02) - Name (_TC2, 0x05) - - // Thermal zone polling frequency: 0 seconds - Name (_TZP, 0) - - // Thermal sampling period for passive cooling: 2 seconds - Name (_TSP, 20) - - // Convert from Degrees C to 1/10 Kelvin for ACPI - Method (CTOK, 1) { - // 10th of Degrees C - Multiply (Arg0, 10, Local0) - - // Convert to Kelvin - Add (Local0, 2732, Local0) - - Return (Local0) - } - - // Threshold for OS to shutdown - Method (_CRT, 0, Serialized) - { - Return (CTOK (\TCRT)) - } - - // Threshold for passive cooling - Method (_PSV, 0, Serialized) - { - Return (CTOK (\TPSV)) - } - - // Processors used for passive cooling - Method (_PSL, 0, Serialized) - { - Return (\PPKG ()) - } - - Method (_TMP, 0, Serialized) - { - Return (CTOK (50)) - } - - Method (_AC0) { - If (LLessEqual (\FLVL, 0)) { - Return (CTOK (\F0OF)) - } Else { - Return (CTOK (\F0ON)) - } - } - - Method (_AC1) { - If (LLessEqual (\FLVL, 1)) { - Return (CTOK (\F1OF)) - } Else { - Return (CTOK (\F1ON)) - } - } - - Method (_AC2) { - If (LLessEqual (\FLVL, 2)) { - Return (CTOK (\F2OF)) - } Else { - Return (CTOK (\F2ON)) - } - } - - Method (_AC3) { - If (LLessEqual (\FLVL, 3)) { - Return (CTOK (\F3OF)) - } Else { - Return (CTOK (\F3ON)) - } - } - - Method (_AC4) { - If (LLessEqual (\FLVL, 4)) { - Return (CTOK (\F4OF)) - } Else { - Return (CTOK (\F4ON)) - } - } - - Name (_AL0, Package () { FAN0 }) - Name (_AL1, Package () { FAN1 }) - Name (_AL2, Package () { FAN2 }) - Name (_AL3, Package () { FAN3 }) - Name (_AL4, Package () { FAN4 }) - - PowerResource (FNP0, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 0)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (0, \FLVL) - Store (\F0PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (1, \FLVL) - Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP1, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 1)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (1, \FLVL) - Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (2, \FLVL) - Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP2, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 2)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (2, \FLVL) - Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (3, \FLVL) - Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP3, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 3)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (3, \FLVL) - Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP4, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 4)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - Device (FAN0) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 0) - Name (_PR0, Package () { FNP0 }) - } - - Device (FAN1) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 1) - Name (_PR0, Package () { FNP1 }) - } - - Device (FAN2) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 2) - Name (_PR0, Package () { FNP2 }) - } - - Device (FAN3) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 3) - Name (_PR0, Package () { FNP3 }) - } - - Device (FAN4) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 4) - Name (_PR0, Package () { FNP4 }) - } - } -} diff --git a/src/mainboard/intel/baskingridge/acpi_tables.c b/src/mainboard/intel/baskingridge/acpi_tables.c deleted file mode 100644 index d5a5f03..0000000 --- a/src/mainboard/intel/baskingridge/acpi_tables.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> -#include <vendorcode/google/chromeos/gnvs.h> - -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->f4of = FAN4_THRESHOLD_OFF; - gnvs->f4on = FAN4_THRESHOLD_ON; - gnvs->f4pw = FAN4_PWM; - - gnvs->f3of = FAN3_THRESHOLD_OFF; - gnvs->f3on = FAN3_THRESHOLD_ON; - gnvs->f3pw = FAN3_PWM; - - gnvs->f2of = FAN2_THRESHOLD_OFF; - gnvs->f2on = FAN2_THRESHOLD_ON; - gnvs->f2pw = FAN2_PWM; - - gnvs->f1of = FAN1_THRESHOLD_OFF; - gnvs->f1on = FAN1_THRESHOLD_ON; - gnvs->f1pw = FAN1_PWM; - - gnvs->f0of = FAN0_THRESHOLD_OFF; - gnvs->f0on = FAN0_THRESHOLD_ON; - gnvs->f0pw = FAN0_PWM; - - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; - gnvs->tmax = MAX_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* - * Enable Front USB ports in S5 by default - * to be consistent with back port behavior - */ - gnvs->s5u0 = 1; - gnvs->s5u1 = 1; - - /* TPM Present */ - gnvs->tpmp = 1; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - -#if CONFIG_CHROMEOS - /* Emerald Lake has no EC (?) */ - gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; -#endif - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/intel/baskingridge/board_info.txt b/src/mainboard/intel/baskingridge/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/intel/baskingridge/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/intel/baskingridge/chromeos.c b/src/mainboard/intel/baskingridge/chromeos.c deleted file mode 100644 index c1cea63..0000000 --- a/src/mainboard/intel/baskingridge/chromeos.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <bootmode.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/gpio.h> - -#ifndef __PRE_RAM__ -#include <boot/coreboot_tables.h> - -#define GPIO_COUNT 6 - -void fill_lb_gpios(struct lb_gpios *gpios) -{ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - - if (!gpio_base) - return; - - u32 gp_lvl = inl(gpio_base + GP_LVL); - u32 gp_lvl2 = inl(gpio_base + GP_LVL2); - u32 gp_lvl3 = inl(gpio_base + GP_LVL3); - - gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); - gpios->count = GPIO_COUNT; - - /* Write Protect: GPIO22 */ - gpios->gpios[0].port = 0; - gpios->gpios[0].polarity = ACTIVE_LOW; - gpios->gpios[0].value = (gp_lvl >> 22) & 1; - strncpy((char *)gpios->gpios[0].name,"write protect", - GPIO_MAX_NAME_LENGTH); - - /* Recovery: GPIO69 - SV_DETECT - J8E3 (silkscreen: J8E2) */ - gpios->gpios[1].port = 69; - gpios->gpios[1].polarity = ACTIVE_HIGH; - gpios->gpios[1].value = (gp_lvl3 >> (69-64)) & 1; - strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); - - /* Developer: GPIO48 - BIOS_RESP - J8E4 (silkscreen: J8E3) */ - gpios->gpios[2].port = 48; - gpios->gpios[2].polarity = ACTIVE_LOW; - gpios->gpios[2].value = (gp_lvl2 >> (48-32)) & 1; - strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); - - /* Hard code the lid switch GPIO to open. */ - gpios->gpios[3].port = -1; - gpios->gpios[3].polarity = ACTIVE_HIGH; - gpios->gpios[3].value = 1; - strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); - - /* Power Button */ - gpios->gpios[4].port = -1; - gpios->gpios[4].polarity = ACTIVE_HIGH; - gpios->gpios[4].value = 0; - strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); - - /* Did we load the VGA option ROM? */ - gpios->gpios[5].port = -1; - gpios->gpios[5].polarity = ACTIVE_HIGH; - gpios->gpios[5].value = gfx_get_init_done(); - strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); -} -#endif - -int get_developer_mode_switch(void) -{ - device_t dev; -#ifdef __PRE_RAM__ - dev = PCI_DEV(0, 0x1f, 0); -#else - dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); -#endif - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl2 = inl(gpio_base + GP_LVL2); - - /* - * Developer: GPIO48, Connected to J8E4, however the silkscreen says - * J8E3. The jumper is active low. - */ - return !((gp_lvl2 >> (48-32)) & 1); -} - -int get_recovery_mode_switch(void) -{ - device_t dev; -#ifdef __PRE_RAM__ - dev = PCI_DEV(0, 0x1f, 0); -#else - dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); -#endif - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl3 = inl(gpio_base + GP_LVL3); - - /* - * Recovery: GPIO69, Connected to J8E3, however the silkscreen says - * J8E2. The jump is active high. - */ - return (gp_lvl3 >> (69-64)) & 1; -} - -int get_write_protect_state(void) -{ - return 0; -} diff --git a/src/mainboard/intel/baskingridge/cmos.layout b/src/mainboard/intel/baskingridge/cmos.layout deleted file mode 100644 index 24e38cd..0000000 --- a/src/mainboard/intel/baskingridge/cmos.layout +++ /dev/null @@ -1,133 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -#Used by ChromeOS: -416 128 r 0 vbnv -#544 440 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/baskingridge/devicetree.cb b/src/mainboard/intel/baskingridge/devicetree.cb deleted file mode 100644 index a173aaa..0000000 --- a/src/mainboard/intel/baskingridge/devicetree.cb +++ /dev/null @@ -1,84 +0,0 @@ -chip northbridge/intel/haswell - - # Enable DisplayPort 1 Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DisplayPort 0 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Enable DVI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/haswell - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S) - - register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - - chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi1_routing" = "1" - register "gpi14_routing" = "2" - register "alt_gp_smi_en" = "0x0000" - register "gpe0_en_1" = "0x4000" - - register "ide_legacy_combined" = "0x0" - register "sata_ahci" = "0x1" - register "sata_port_map" = "0x3f" - - # SuperIO range is 0x700-0x73f - register "gen2_dec" = "0x003c0701" - - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 off end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 (WLAN) - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 (Debug) - device pci 1c.3 on end # PCIe Port #4 (LAN) - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1c.6 off end # PCIe Port #7 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on end # LPC bridge - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/intel/baskingridge/dsdt.asl b/src/mainboard/intel/baskingridge/dsdt.asl deleted file mode 100644 index 8746e02..0000000 --- a/src/mainboard/intel/baskingridge/dsdt.asl +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define ENABLE_TPM - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include "acpi/thermal.asl" - - #include "../../../cpu/intel/haswell/acpi/cpu.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/haswell/acpi/haswell.asl> - #include <southbridge/intel/lynxpoint/acpi/pch.asl> - } - } - - #include "acpi/chromeos.asl" - #include <vendorcode/google/chromeos/acpi/chromeos.asl> - - /* Chipset specific sleep states */ - #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> -} diff --git a/src/mainboard/intel/baskingridge/fadt.c b/src/mainboard/intel/baskingridge/fadt.c deleted file mode 100644 index 315cb58..0000000 --- a/src/mainboard/intel/baskingridge/fadt.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_DESKTOP; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/intel/baskingridge/gpio.h b/src/mainboard/intel/baskingridge/gpio.h deleted file mode 100644 index d271644..0000000 --- a/src/mainboard/intel/baskingridge/gpio.h +++ /dev/null @@ -1,247 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef BASKING_RIDGE_GPIO_H -#define BASKING_RIDGE_GPIO_H - -#include "southbridge/intel/lynxpoint/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, /* PCH_GPIO0_R -> S_GPIO -> J9F4 */ - .gpio1 = GPIO_MODE_GPIO, /* SMC_EXTSMI_N */ - .gpio2 = GPIO_MODE_GPIO, /* TP_RSVD_TESTMODE - float */ - .gpio3 = GPIO_MODE_NATIVE, /* PCH_PCI_IRQ_N -> SIO GPIO12/SMI# */ - .gpio4 = GPIO_MODE_GPIO, /* EXTTS_SNI_DRV0_PCH - float */ - .gpio5 = GPIO_MODE_GPIO, /* EXTTS_SNI_DRV1_PCH - float */ - .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR_N */ - .gpio7 = GPIO_MODE_GPIO, /* SMC_RUNTIME_SCI_N */ - .gpio8 = GPIO_MODE_GPIO, /* PCH_GPIO8 -> DDR Voltage Select Bit 0 */ - .gpio9 = GPIO_MODE_NATIVE, /* USB_OC_10_11_R_N */ - .gpio10 = GPIO_MODE_NATIVE, /* USB_OC_12_13_R_N */ - .gpio11 = GPIO_MODE_GPIO, /* PCH_GPIO11 -> HOST_ALERT2_N -> PCIE_RSVD_2_N (3GIO_X1) slot 4 */ - .gpio12 = GPIO_MODE_GPIO, /* PM_LANPHY_ENABLE */ - .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST_N */ - .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE_SCI_N (not stuffed) & USB_8_9_PWR */ - .gpio15 = GPIO_MODE_GPIO, /* Always GPIO: HOST_ALERT1_R_N -> PCIE_RSV_1_N */ - .gpio16 = GPIO_MODE_NATIVE, /* SATA_DET4_R_N */ - .gpio17 = GPIO_MODE_GPIO, /* DGPU_PWROK */ - .gpio18 = GPIO_MODE_NATIVE, /* CK_SLOT1_OE_N_R */ - .gpio19 = GPIO_MODE_GPIO, /* BBS_BIT0_R - STRAP */ - .gpio20 = GPIO_MODE_NATIVE, /* CK_SLOT2_OE_N_R */ - .gpio21 = GPIO_MODE_GPIO, /* SATA_DET0_R_N -> J9H4 */ - .gpio22 = GPIO_MODE_GPIO, /* BIOS_REC -> J8G1 */ - .gpio23 = GPIO_MODE_NATIVE, /* PCH_DRQ1_N */ - .gpio24 = GPIO_MODE_GPIO, /* Always GPIO: PCH_GPIO24_R1 -> DDR Voltage Select Bit 2 */ - .gpio25 = GPIO_MODE_NATIVE, /* CK_SLOT3_OE_N */ - .gpio26 = GPIO_MODE_NATIVE, /* CK_SLOT4_OE_N */ - .gpio27 = GPIO_MODE_GPIO, /* Always GPIO: PCH_GPIO_27 -> SMC_WAKE_SCI_N & LANWAKE_N */ - .gpio28 = GPIO_MODE_GPIO, /* Always GPIO: PLL_ODVR_EN -> PCH_AUDIO_PWR_N */ - .gpio29 = GPIO_MODE_NATIVE, /* PCH_SLP_WLAN_N */ - .gpio30 = GPIO_MODE_NATIVE, /* SUS_PWR_ACK_R */ - .gpio31 = GPIO_MODE_NATIVE, /* AC_PRESENT_R */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_OUTPUT, - /* .gpio3 NATIVE */ - .gpio4 = GPIO_DIR_OUTPUT, - .gpio5 = GPIO_DIR_OUTPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - /* .gpio10 NATIVE */ - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - /* .gpio13 NATIVE */ - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_INPUT, - /* .gpio16 NATIVE */ - .gpio17 = GPIO_DIR_INPUT, - /* .gpio18 NATIVE */ - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_INPUT, - /* .gpio23 NATIVE */ - .gpio24 = GPIO_DIR_OUTPUT, - /* .gpio25 NATIVE */ - /* .gpio26 NATIVE */ - .gpio27 = GPIO_DIR_INPUT, - .gpio28 = GPIO_DIR_INPUT, - /* .gpio29 NATIVE */ - /* .gpio30 NATIVE */ - /* .gpio31 NATIVE */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio2 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_LOW, - .gpio24 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, /* Always GPIO on desktop. Mobile Native. PM_CLKRUN_N */ - .gpio33 = GPIO_MODE_NATIVE, /* HDADOCKEN_R_N */ - .gpio34 = GPIO_MODE_GPIO, /* PCH_GPIO34 -> SATA_PWR_EN0_N */ - .gpio35 = GPIO_MODE_GPIO, /* SATA_PWR_EN1_R_N */ - .gpio36 = GPIO_MODE_NATIVE, /* SATA_ODD_PRSNT_R_N */ - .gpio37 = GPIO_MODE_NATIVE, /* SATA_ODD_DA_N_R */ - .gpio38 = GPIO_MODE_GPIO, /* MFG_MODE */ - .gpio39 = GPIO_MODE_GPIO, /* GFX_CRB_DET */ - .gpio40 = GPIO_MODE_NATIVE, /* USB_OC_2_5_R_N */ - .gpio41 = GPIO_MODE_GPIO, /* USB_0_1_PWR */ - .gpio42 = GPIO_MODE_NATIVE, /* USB_OC_6_7_R_N */ - .gpio43 = GPIO_MODE_NATIVE, /* USB_OSC_8_9_R_N */ - .gpio44 = GPIO_MODE_NATIVE, /* CK_SLOT5_OE_N */ - .gpio45 = GPIO_MODE_NATIVE, /* CK_PCIE_LAN_REQ_N */ - .gpio46 = GPIO_MODE_GPIO, /* PCH_GPIO46_R -> DDR Voltage Select Bit 1 */ - .gpio47 = GPIO_MODE_NATIVE, /* PEGA_CKREQ_N */ - .gpio48 = GPIO_MODE_GPIO, /* BIOS_RESP -> J8E3 */ - .gpio49 = GPIO_MODE_GPIO, /* PCH_GP_49 -> CRIT_TEMP_REP_N */ - .gpio50 = GPIO_MODE_GPIO, /* DGPU_HOLD_RST_N */ - .gpio51 = GPIO_MODE_GPIO, /* BBS_BIT1 Strap */ - .gpio52 = GPIO_MODE_GPIO, /* DGPU_SELECT_N */ - .gpio53 = GPIO_MODE_GPIO, /* DGPU_PWM_SELECT_N -> PEG_JTAG5 */ - .gpio54 = GPIO_MODE_GPIO, /* DGPU_PWR_EN_N -> PEG_RSVD5 */ - .gpio55 = GPIO_MODE_GPIO, /* STP_A16OVR Strap */ - .gpio56 = GPIO_MODE_NATIVE, /* MC_CKREQ_N */ - .gpio57 = GPIO_MODE_GPIO, /* Always GPIO. NFC_IRQ_R */ - .gpio58 = GPIO_MODE_NATIVE, /* SML1_CK */ - .gpio59 = GPIO_MODE_NATIVE, /* USB_OC_0_1_R_N */ - .gpio60 = GPIO_MODE_GPIO, /* DRAMRST_CNTRL_PCH */ - .gpio61 = GPIO_MODE_NATIVE, /* PM_SUS_STAT_N */ - .gpio62 = GPIO_MODE_NATIVE, /* SUS_CK */ - .gpio63 = GPIO_MODE_NATIVE, /* SLP_S5_R_N */ -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - /* .gpio32 NATIVE */ - /* .gpio33 NATIVE */ - .gpio34 = GPIO_DIR_OUTPUT, - .gpio35 = GPIO_DIR_OUTPUT, - /* .gpio36 NATIVE */ - /* .gpio37 NATIVE */ - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - /* .gpio40 NATIVE */ - .gpio41 = GPIO_DIR_OUTPUT, - /* .gpio42 NATIVE */ - /* .gpio43 NATIVE */ - /* .gpio44 NATIVE */ - /* .gpio45 NATIVE */ - .gpio46 = GPIO_DIR_OUTPUT, - /* .gpio47 NATIVE */ - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_OUTPUT, - .gpio50 = GPIO_DIR_OUTPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_OUTPUT, - .gpio55 = GPIO_DIR_OUTPUT, - /* .gpio56 NATIVE */ - .gpio57 = GPIO_DIR_INPUT, - /* .gpio58 NATIVE */ - /* .gpio59 NATIVE */ - .gpio60 = GPIO_DIR_OUTPUT, - /* .gpio61 NATIVE */ - /* .gpio62 NATIVE */ - /* .gpio63 NATIVE */ -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio34 = GPIO_LEVEL_LOW, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio35 = GPIO_LEVEL_LOW, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_LOW, - .gpio52 = GPIO_LEVEL_LOW, - .gpio53 = GPIO_LEVEL_LOW, - .gpio54 = GPIO_LEVEL_LOW, - .gpio55 = GPIO_LEVEL_LOW, - .gpio60 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, /* CK_PCH_SIO_DOCK_R -> TP_CK_PCI_SIO_DOCK */ - .gpio65 = GPIO_MODE_NATIVE, /* CK_FLEX1 */ - .gpio66 = GPIO_MODE_GPIO, /* CK_FLEX2 */ - .gpio67 = GPIO_MODE_GPIO, /* DGPU_PRSNT_N -> PEG_RSVD3 */ - .gpio68 = GPIO_MODE_GPIO, /* SATA_ODD_PWRGT */ - .gpio69 = GPIO_MODE_GPIO, /* SV_DET -> J8E2 */ - .gpio70 = GPIO_MODE_GPIO, /* USB3_DET_P2_N */ - .gpio71 = GPIO_MODE_GPIO, /* USB3_DET_P3_N */ - .gpio72 = GPIO_MODE_NATIVE, /* PM_BATLOW_R_N */ - .gpio73 = GPIO_MODE_NATIVE, /* CK_REQ_DOCK_N */ - .gpio74 = GPIO_MODE_NATIVE, /* PCH_GPIO74_R -> AMB_THM2_R_N (PCHHOT) */ - .gpio75 = GPIO_MODE_NATIVE, /* SM1_DATA */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - /* .gpio65 NATIVE */ - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_INPUT, - .gpio68 = GPIO_DIR_OUTPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - /* .gpio72 NATIVE */ - /* .gpio73 NATIVE */ - /* .gpio74 NATIVE */ - /* .gpio75 NATIVE */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_LOW, - .gpio66 = GPIO_LEVEL_LOW, - .gpio68 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; - -#endif diff --git a/src/mainboard/intel/baskingridge/hda_verb.c b/src/mainboard/intel/baskingridge/hda_verb.c deleted file mode 100644 index 96770de..0000000 --- a/src/mainboard/intel/baskingridge/hda_verb.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 - 0x10134210, // Subsystem ID - 0x00000007, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ - AZALIA_SUBVENDOR(0x0, 0x10134210), - - /* Pin Widget Verb Table */ - - /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), - - /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ - AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), - - /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), - - /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), - - /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), - - /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ - AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), - - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/baskingridge/mainboard.c b/src/mainboard/intel/baskingridge/mainboard.c deleted file mode 100644 index a6839fc..0000000 --- a/src/mainboard/intel/baskingridge/mainboard.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/lynxpoint/pch.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/baskingridge/mainboard_smi.c b/src/mainboard/intel/baskingridge/mainboard_smi.c deleted file mode 100644 index f24af67..0000000 --- a/src/mainboard/intel/baskingridge/mainboard_smi.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/lynxpoint/nvs.h> -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/me.h> -#include <northbridge/intel/haswell/haswell.h> -#include <cpu/intel/haswell/haswell.h> - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - smm_get_gnvs()->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -/* - * Change LED_POWER# (SIO GPIO 45) state based on sleep type. - * The IO address is hardcoded as we don't have device path in SMM. - */ -#define SIO_GPIO_BASE_SET4 (0x730 + 3) -#define SIO_GPIO_BLINK_GPIO45 0x25 -void mainboard_smi_sleep(u8 slp_typ) -{ - u8 reg8; - - switch (slp_typ) { - case SLP_TYP_S3: - case SLP_TYP_S4: - break; - - case SLP_TYP_S5: - /* Turn off LED */ - reg8 = inb(SIO_GPIO_BASE_SET4); - reg8 |= (1 << 5); - outb(reg8, SIO_GPIO_BASE_SET4); - break; - } -} - -#define APMC_FINALIZE 0xcb - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APMC_FINALIZE: - if (mainboard_finalized) { - printk(BIOS_DEBUG, "SMI#: Already finalized\n"); - return 0; - } - - intel_pch_finalize_smm(); - intel_northbridge_haswell_finalize_smm(); - intel_cpu_haswell_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/intel/baskingridge/onboard.h b/src/mainboard/intel/baskingridge/onboard.h deleted file mode 100644 index 52f53e0..0000000 --- a/src/mainboard/intel/baskingridge/onboard.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef LUMPY_ONBOARD_H -#define LUMPY_ONBOARD_H - -#include <arch/smp/mpspec.h> - -#define LUMPY_LIGHTSENSOR_NAME "lightsensor" -#define LUMPY_LIGHTSENSOR_I2C_ADDR 0x44 -#define LUMPY_LIGHTSENSOR_GSI 20 -#define LUMPY_LIGHTSENSOR_IRQ 14 -#define LUMPY_LIGHTSENSOR_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) - -#define LUMPY_TRACKPAD_NAME "trackpad" -#define LUMPY_TRACKPAD_I2C_ADDR 0x67 -#define LUMPY_TRACKPAD_GSI 21 -#define LUMPY_TRACKPAD_IRQ 15 -#define LUMPY_TRACKPAD_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) - -#endif diff --git a/src/mainboard/intel/baskingridge/romstage.c b/src/mainboard/intel/baskingridge/romstage.c deleted file mode 100644 index e02ae7a..0000000 --- a/src/mainboard/intel/baskingridge/romstage.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stddef.h> -#include <console/console.h> -#include "cpu/intel/haswell/haswell.h" -#include "northbridge/intel/haswell/haswell.h" -#include "northbridge/intel/haswell/raminit.h" -#include "southbridge/intel/lynxpoint/pch.h" -#include "gpio.h" - -const struct rcba_config_instruction rcba_config[] = { - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQE - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), - RCBA_SET_REG_32(D30IP, (NOINT << D30IP_PIP)), - RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), - RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP)), - RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), - RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), - RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)), - RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), - - /* Device interrupt route registers */ - RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)), - RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)), - RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)), - RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)), - RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), - RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - - /* Disable unused devices (board specific) */ - RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), - - RCBA_END_CONFIG, -}; - -void mainboard_romstage_entry(unsigned long bist) -{ - struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = DEFAULT_MCHBAR, - .dmibar = DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = DEFAULT_PCIEXBAR, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, - .ec_present = 0, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 0, - .dimm_channel1_disabled = 0, - .max_ddr3_freq = 1600, - .usb2_ports = { - /* Length, Enable, OCn#, Location */ - { 0x0040, 1, 0, /* P0: Back USB3 port (OC0) */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 0, /* P1: Back USB3 port (OC0) */ - USB_PORT_BACK_PANEL }, - { 0x0040, 1, 1, /* P2: Flex Port on bottom (OC1) */ - USB_PORT_FLEX }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: Dock connector */ - USB_PORT_DOCK }, - { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: Mini PCIE */ - USB_PORT_MINI_PCIE }, - { 0x0040, 1, 1, /* P5: USB eSATA header (OC1) */ - USB_PORT_FLEX }, - { 0x0040, 1, 3, /* P6: Front Header J8H2 (OC3) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 3, /* P7: Front Header J8H2 (OC3) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 4, /* P8: USB/LAN Jack (OC4) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 4, /* P9: USB/LAN Jack (OC4) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 5, /* P10: Front Header J7H3 (OC5) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 5, /* P11: Front Header J7H3 (OC5) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 6, /* P12: USB/DP Jack (OC6) */ - USB_PORT_FRONT_PANEL }, - { 0x0040, 1, 6, /* P13: USB/DP Jack (OC6) */ - USB_PORT_FRONT_PANEL }, - }, - .usb3_ports = { - /* Enable, OCn# */ - { 1, 0 }, /* P1; */ - { 1, 0 }, /* P2; */ - { 1, 0 }, /* P3; */ - { 1, 0 }, /* P4; */ - { 1, 0 }, /* P6; */ - { 1, 0 }, /* P6; */ - }, - }; - - struct romstage_params romstage_params = { - .pei_data = &pei_data, - .gpio_map = &mainboard_gpio_map, - .rcba_config = &rcba_config[0], - .bist = bist, - .copy_spd = NULL, - }; - - /* Call into the real romstage main with this board's attributes. */ - romstage_common(&romstage_params); -} diff --git a/src/mainboard/intel/baskingridge/thermal.h b/src/mainboard/intel/baskingridge/thermal.h deleted file mode 100644 index d8c0025..0000000 --- a/src/mainboard/intel/baskingridge/thermal.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef BASKING_RIDGE_THERMAL_H -#define BASKING_RIDGE_THERMAL_H - -/* Fan is OFF */ -#define FAN4_THRESHOLD_OFF 0 -#define FAN4_THRESHOLD_ON 0 -#define FAN4_PWM 0x00 - -/* Fan is at LOW speed */ -#define FAN3_THRESHOLD_OFF 48 -#define FAN3_THRESHOLD_ON 55 -#define FAN3_PWM 0x40 - -/* Fan is at MEDIUM speed */ -#define FAN2_THRESHOLD_OFF 52 -#define FAN2_THRESHOLD_ON 64 -#define FAN2_PWM 0x80 - -/* Fan is at HIGH speed */ -#define FAN1_THRESHOLD_OFF 60 -#define FAN1_THRESHOLD_ON 68 -#define FAN1_PWM 0xb0 - -/* Fan is at FULL speed */ -#define FAN0_THRESHOLD_OFF 66 -#define FAN0_THRESHOLD_ON 78 -#define FAN0_PWM 0xff - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 100 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 90 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/Kconfig b/src/mainboard/intel/bayley_bay_crb_fsp/Kconfig new file mode 100644 index 0000000..2aabcbc --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/Kconfig @@ -0,0 +1,103 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_INTEL_BAYLEY_BAY_CRB_FSP + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SOC_INTEL_FSP_BAYTRAIL + select BOARD_ROMSIZE_KB_2048 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select OVERRIDE_MRC_CACHE_LOC + select POST_IO + select INCLUDE_MICROCODE_IN_BUILD if FSP_PACKAGE_DEFAULT + select ENABLE_BUILTIN_COM1 if FSP_PACKAGE_DEFAULT + select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT + select DEFAULT_CONSOLE_LOGLEVEL_7 if FSP_PACKAGE_DEFAULT + select TSC_MONOTONIC_TIMER + +config MAINBOARD_DIR + string + default "intel/bayley_bay_crb_fsp" + +config INCLUDE_ME + bool + default n + +config LOCK_MANAGEMENT_ENGINE + bool + default n + +config MAINBOARD_PART_NUMBER + string + default "Bayley Bay CRB (FSP)" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config CACHE_ROM_SIZE_OVERRIDE + hex + default 0x800000 + +config FSP_FILE + string + default "../intel/fsp/baytrail/BAYTRAIL_FSP.fd" + +config MRC_CACHE_LOC_OVERRIDE + hex + default 0xfff80000 + depends on ENABLE_FSP_FAST_BOOT + +config CBFS_SIZE + hex + default 0x00200000 + +config DRIVERS_PS2_KEYBOARD + bool + default n + +config CONSOLE_POST + bool + default y + +config ENABLE_FSP_FAST_BOOT + bool + depends on HAVE_FSP_BIN + default y + +config VIRTUAL_ROM_SIZE + hex + depends on ENABLE_FSP_FAST_BOOT + default 0x800000 + +config FSP_PACKAGE_DEFAULT + bool "Configure defaults for the Intel FSP package" + default n + +config VGA_BIOS + bool + default y if FSP_PACKAGE_DEFAULT + +endif # BOARD_INTEL_BAYLEY_BAY_CRB_FSP diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/Makefile.inc b/src/mainboard/intel/bayley_bay_crb_fsp/Makefile.inc new file mode 100644 index 0000000..2f7a8c5 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += gpio.c +ramstage-y += irqroute.c diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/acpi/ec.asl b/src/mainboard/intel/bayley_bay_crb_fsp/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/acpi/mainboard.asl b/src/mainboard/intel/bayley_bay_crb_fsp/acpi/mainboard.asl new file mode 100644 index 0000000..c1884c5 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/acpi/mainboard.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/acpi/superio.asl b/src/mainboard/intel/bayley_bay_crb_fsp/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/acpi_tables.c b/src/mainboard/intel/bayley_bay_crb_fsp/acpi_tables.c new file mode 100644 index 0000000..5f81e26 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/acpi_tables.c @@ -0,0 +1,254 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <baytrail/acpi.h> +#include <baytrail/nvs.h> +#include <baytrail/iomap.h> + + +extern const unsigned char AmlCode[]; + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + acpi_init_gnvs(gnvs); + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* TPM Present */ + gnvs->tpmp = 0; + + /* Enable DPTF */ + gnvs->dpte = 0; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + current = acpi_madt_irq_overrides(current); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *dsdt; + global_nvs_t *gnvs; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + printk(BIOS_DEBUG, "ACPI: * FACS @ %p Length %x", facs, + facs->length); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + ALIGN_CURRENT; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x", dsdt, + dsdt->length); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + printk(BIOS_DEBUG, "ACPI: * FADT @ %p Length %x", fadt, + fadt->header.length); + + /* + * We explicitly add these tables later on: + */ + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_intel_hpet(hpet); + acpi_add_table(rsdp, hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p Length %x\n", hpet, + hpet->header.length); + + /* If we want to use HPET Timers Linux wants an MADT */ + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + printk(BIOS_DEBUG, "ACPI: * MADT @ %p Length %x\n",madt, + madt->header.length); + + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + printk(BIOS_DEBUG, "ACPI: * MCFG @ %p Length %x\n",mcfg, + mcfg->header.length); + + /* Update GNVS pointer into CBMEM */ + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + printk(BIOS_DEBUG, "ACPI: Could not find CBMEM GNVS\n"); + gnvs = (global_nvs_t *)current; + } + + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> %p\n", i, gnvs); + *(u32*)(((u32)dsdt) + i) = (unsigned long)gnvs; + acpi_save_gnvs((unsigned long)gnvs); + break; + } + } + + /* And fill it */ + acpi_create_gnvs(gnvs); + + /* And tell SMI about it */ +#if CONFIG_HAVE_SMI_HANDLER + smm_setup_structures(gnvs, NULL, NULL); +#endif + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI Updated DSDT @ %p Length %x\n", dsdt, + dsdt->length); + + ssdt = (acpi_header_t *)current; + memset(ssdt, 0, sizeof(acpi_header_t)); + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + if (ssdt->length) { + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p Length %x\n",ssdt, + ssdt->length); + ALIGN_CURRENT; + } else { + ssdt = NULL; + printk(BIOS_DEBUG, "ACPI: * SSDT not generated.\n"); + } + + ssdt2 = (acpi_header_t *)current; + memset(ssdt2, 0, sizeof(acpi_header_t)); + acpi_create_serialio_ssdt(ssdt2); + if (ssdt2->length) { + current += ssdt2->length; + acpi_add_table(rsdp, ssdt2); + printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2, + ssdt2->length); + ALIGN_CURRENT; + } else { + ssdt2 = NULL; + printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n"); + } + + printk(BIOS_DEBUG, "current = %lx\n", current); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/board_info.txt b/src/mainboard/intel/bayley_bay_crb_fsp/board_info.txt new file mode 100644 index 0000000..501a6a4 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/board_info.txt @@ -0,0 +1,4 @@ +Board name: Bayley Bay +Category: eval +ROM protocol: SPI +ROM socketed: n diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/cmos.layout b/src/mainboard/intel/bayley_bay_crb_fsp/cmos.layout new file mode 100644 index 0000000..115dcb5 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/cmos.layout @@ -0,0 +1,132 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/devicetree.cb b/src/mainboard/intel/bayley_bay_crb_fsp/devicetree.cb new file mode 100644 index 0000000..356c8df --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/devicetree.cb @@ -0,0 +1,81 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip soc/intel/fsp_baytrail + + #### ACPI Register Settings #### + register "fadt_pm_profile" = "PM_MOBILE" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042" + + #### FSP register settings #### + register "SataMode" = "SATA_MODE_AHCI" + register "MrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" + register "MrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" + register "MrcInitTsegSize" = "TSEG_SIZE_8_MB" + register "MrcInitMmioSize" = "MMIO_SIZE_DEFAULT" + register "eMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" + register "IgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" + register "ApertureSize" = "APERTURE_SIZE_DEFAULT" + register "GttSize" = "GTT_SIZE_DEFAULT" + register "LpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # 8086 0F00 - SoC router + device pci 02.0 on end # 8086 0F31 - GFX + device pci 03.0 off end # 8086 0F38 - MIPI - camera interface + + device pci 10.0 off end # 8086 0F14 - EMMC 4.1 Port (MMC1 pins) - (DO NOT USE) - Only 1 EMMC port at a time + device pci 11.0 on end # 8086 0F15 - SDIO Port (SD2 pins) + device pci 12.0 on end # 8086 0F16 - SD Port (SD3 pins) + device pci 13.0 on end # 8086 0F23 - SATA AHCI (0F20, 0F21, 0F22, 0F23) + device pci 14.0 on end # 8086 0F35 - USB XHCI - Only 1 USB controller at a time + device pci 15.0 off end # 8086 0F28 - LP Engine Audio + device pci 16.0 off end # 8086 0F37 - OTG controller + device pci 17.0 on end # 8086 0F50 - EMMC 4.5 Port (MMC1 pins) - Only 1 EMMC port at a time + device pci 18.0 on end # 8086 0F40 - SIO - DMA + device pci 18.1 on end # 8086 0F41 - I2C Port 1 + device pci 18.2 on end # 8086 0F42 - I2C Port 2 + device pci 18.3 on end # 8086 0F43 - I2C Port 3 + device pci 18.4 on end # 8086 0F44 - I2C Port 4 + device pci 18.5 on end # 8086 0F45 - I2C Port 5 + device pci 18.6 on end # 8086 0F46 - I2C Port 6 + device pci 18.7 on end # 8086 0F47 - I2C Port 7 + device pci 1a.0 on end # 8086 0F18 - Trusted Execution Engine + device pci 1b.0 on end # 8086 0F04 - HD Audio + device pci 1c.0 on end # 8086 0F48 - PCIe Root Port 1 (x4 slot) + device pci 1c.1 on end # 8086 0F4A - PCIe Root Port 2 (half mini pcie slot) + device pci 1c.2 on end # 8086 0F4C - PCIe Root Port 3 (front x1 slot) + device pci 1c.3 on end # 8086 0F4E - PCIe Root Port 4 (rear x1 slot) + device pci 1d.0 off end # 8086 0F34 - USB EHCI - Only 1 USB controller at a time + device pci 1e.0 on end # 8086 0F06 - SIO - DMA + device pci 1e.1 on end # 8086 0F08 - PWM 1 + device pci 1e.2 on end # 8086 0F09 - PWM 2 + device pci 1e.3 on end # 8086 0F0A - HSUART 1 + device pci 1e.4 on end # 8086 0F0C - HSUART 2 + device pci 1e.5 on end # 8086 0F0E - SPI + device pci 1f.0 on end # 8086 0F1C - LPC bridge + device pci 1f.3 on end # 8086 0F12 - SMBus 0 + end +end diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/dsdt.asl b/src/mainboard/intel/bayley_bay_crb_fsp/dsdt.asl new file mode 100644 index 0000000..cb2a4da --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/dsdt.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define INCLUDE_LPE 1 +#define INCLUDE_SCC 1 +#define INCLUDE_EHCI 1 +#define INCLUDE_XHCI 1 +#define INCLUDE_LPSS 1 + + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/fsp_baytrail/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/fsp_baytrail/acpi/globalnvs.asl> + + #include <soc/intel/fsp_baytrail/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <soc/intel/fsp_baytrail/acpi/southcluster.asl> + } + } + + /* Chipset specific sleep states */ + #include <soc/intel/fsp_baytrail/acpi/sleepstates.asl> + + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/fadt.c b/src/mainboard/intel/bayley_bay_crb_fsp/fadt.c new file mode 100644 index 0000000..29d0c1d --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/fadt.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <baytrail/acpi.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + acpi_fill_in_fadt(fadt,facs,dsdt); + + /* Platform specific customizations go here */ + + header->checksum = 0; + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/gpio.c b/src/mainboard/intel/bayley_bay_crb_fsp/gpio.c new file mode 100644 index 0000000..ead4abc --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/gpio.c @@ -0,0 +1,224 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <baytrail/gpio.h> +#include "irqroute.h" + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* GPIO 0 */ + GPIO_FUNC2, /* GPIO 1 */ + GPIO_FUNC2, /* GPIO 2 */ + GPIO_FUNC2, /* GPIO 3 */ + GPIO_FUNC2, /* GPIO 4 */ + GPIO_FUNC2, /* GPIO 5 */ + GPIO_FUNC2, /* GPIO 6 */ + GPIO_FUNC2, /* GPIO 7 */ + GPIO_FUNC2, /* GPIO 8 */ + GPIO_FUNC2, /* GPIO 9 */ + GPIO_FUNC2, /* GPIO 10 */ + GPIO_FUNC2, /* GPIO 11 */ + GPIO_FUNC2, /* GPIO 12 */ + GPIO_FUNC2, /* GPIO 13 */ + GPIO_FUNC2, /* GPIO 14 */ + GPIO_FUNC2, /* GPIO 15 */ + GPIO_FUNC2, /* GPIO 16 */ + GPIO_FUNC2, /* GPIO 17 */ + GPIO_FUNC2, /* GPIO 18 */ + GPIO_FUNC2, /* GPIO 19 */ + GPIO_FUNC2, /* GPIO 20 */ + GPIO_FUNC2, /* GPIO 21 */ + GPIO_FUNC2, /* GPIO 22 */ + GPIO_FUNC2, /* GPIO 23 */ + GPIO_FUNC2, /* GPIO 24 */ + GPIO_FUNC2, /* GPIO 25 */ + GPIO_FUNC2, /* GPIO 26 */ + GPIO_END +}; + +/* SCORE GPIOs (GPIO_S0_SC_XX)*/ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_FUNC1, /* GPIO_S0_SC[000] SATA_GP[0] - - - */ + GPIO_FUNC2, /* GPIO_S0_SC[001] SATA_GP[1] SATA_DEVSLP[0] - - */ + GPIO_FUNC1, /* GPIO_S0_SC[002] SATA_LED# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[003] PCIE_CLKREQ[0]# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[004] PCIE_CLKREQ[1]# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[005] PCIE_CLKREQ[2]# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[006] PCIE_CLKREQ[3]# - - - */ + GPIO_NC, /* GPIO_S0_SC[007] RESERVED SD3_WP - - */ + GPIO_FUNC2, /* GPIO_S0_SC[008] I2S0_CLK HDA_RST# - - */ + GPIO_FUNC2, /* GPIO_S0_SC[009] I2S0_FRM HDA_SYNC - - */ + GPIO_FUNC2, /* GPIO_S0_SC[010] I2S0_DATAOUT HDA_CLK - - */ + GPIO_FUNC2, /* GPIO_S0_SC[011] I2S0_DATAIN HDA_SDO - - */ + GPIO_FUNC2, /* GPIO_S0_SC[012] I2S1_CLK HDA_SDI[0] - - */ + GPIO_NC, /* GPIO_S0_SC[013] I2S1_FRM HDA_SDI[1] - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[014] I2S1_DATAOUT RESERVED - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[015] I2S1_DATAIN RESERVED - - */ + GPIO_NC, /* GPIO_S0_SC[016] MMC1_CLK - MMC1_45_CLK - */ + GPIO_NC, /* GPIO_S0_SC[017] MMC1_D[0] - MMC1_45_D[0] - */ + GPIO_NC, /* GPIO_S0_SC[018] MMC1_D[1] - MMC1_45_D[1] - */ + GPIO_NC, /* GPIO_S0_SC[019] MMC1_D[2] - MMC1_45_D[2] - */ + GPIO_NC, /* GPIO_S0_SC[020] MMC1_D[3] - MMC1_45_D[3] - */ + GPIO_NC, /* GPIO_S0_SC[021] MMC1_D[4] - MMC1_45_D[4] - */ + GPIO_NC, /* GPIO_S0_SC[022] MMC1_D[5] - MMC1_45_D[5] - */ + GPIO_NC, /* GPIO_S0_SC[023] MMC1_D[6] - MMC1_45_D[6] - */ + GPIO_NC, /* GPIO_S0_SC[024] MMC1_D[7] - MMC1_45_D[7] - */ + GPIO_NC, /* GPIO_S0_SC[025] MMC1_CMD - MMC1_45_CMD - */ + GPIO_NC, /* GPIO_S0_SC[026] MMC1_RST# SATA_DEVSLP[0] MMC1_45_RST# - */ + GPIO_FUNC1, /* GPIO_S0_SC[027] SD2_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[028] SD2_D[0] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[029] SD2_D[1] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[030] SD2_D[2] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[031] SD2_D[3]_CD# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[032] SD2_CMD - - - */ + GPIO_NC, /* GPIO_S0_SC[033] SD3_CLK - - - */ + GPIO_NC, /* GPIO_S0_SC[034] SD3_D[0] - - - */ + GPIO_NC, /* GPIO_S0_SC[035] SD3_D[1] - - - */ + GPIO_NC, /* GPIO_S0_SC[036] SD3_D[2] - - - */ + GPIO_NC, /* GPIO_S0_SC[037] SD3_D[3] - - - */ + GPIO_NC, /* GPIO_S0_SC[038] SD3_CD# - - - */ + GPIO_NC, /* GPIO_S0_SC[039] SD3_CMD - - - */ + GPIO_NC, /* GPIO_S0_SC[040] SD3_1P8EN - - - */ + GPIO_NC, /* GPIO_S0_SC[041] SD3_PWREN# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[042] ILB_LPC_AD[0] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[043] ILB_LPC_AD[1] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[044] ILB_LPC_AD[2] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[045] ILB_LPC_AD[3] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[046] ILB_LPC_FRAME# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[047] ILB_LPC_CLK[0] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[048] ILB_LPC_CLK[1] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[049] ILB_LPC_CLKRUN# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[050] ILB_LPC_SERIRQ - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[051] PCU_SMB_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[052] PCU_SMB_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[053] PCU_SMB_ALERT# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[054] ILB_8254_SPKR RESERVED - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[055] RESERVED - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[056] RESERVED - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[057] PCU_UART_TXD - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[058] RESERVED - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[059] RESERVED - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[060] RESERVED - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[061] PCU_UART_RXD - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[062] LPE_I2S2_CLK SATA_DEVSLP[1] RESERVED - */ + GPIO_FUNC1, /* GPIO_S0_SC[063] LPE_I2S2_FRM RESERVED - - */ + GPIO_FUNC1, /* GPIO_S0_SC[064] LPE_I2S2_DATAIN - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[065] LPE_I2S2_DATAOUT - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[066] SIO_SPI_CS# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[067] SIO_SPI_MISO - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[068] SIO_SPI_MOSI - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[069] SIO_SPI_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[070] SIO_UART1_RXD RESERVED - - */ + GPIO_FUNC1, /* GPIO_S0_SC[071] SIO_UART1_TXD RESERVED - - */ + GPIO_FUNC1, /* GPIO_S0_SC[072] SIO_UART1_RTS# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[073] SIO_UART1_CTS# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[074] SIO_UART2_RXD - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[075] SIO_UART2_TXD - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[076] SIO_UART2_RTS# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[077] SIO_UART2_CTS# - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[078] SIO_I2C0_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[079] SIO_I2C0_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[080] SIO_I2C1_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[081] SIO_I2C1_CLK RESERVED - - */ + GPIO_FUNC1, /* GPIO_S0_SC[082] SIO_I2C2_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[083] SIO_I2C2_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[084] SIO_I2C3_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[085] SIO_I2C3_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[086] SIO_I2C4_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[087] SIO_I2C4_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[088] SIO_I2C5_DATA - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[089] SIO_I2C5_CLK - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[090] SIO_I2C6_DATA ILB_NMI - - */ + GPIO_FUNC1, /* GPIO_S0_SC[091] SIO_I2C6_CLK SD3_WP - - */ + GPIO_FUNC1, /* RESERVED GPIO_S0_SC[092] - - - */ + GPIO_FUNC1, /* RESERVED GPIO_S0_SC[093] - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[094] SIO_PWM[0] - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[095] SIO_PWM[1] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[096] PMC_PLT_CLK[0] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[097] PMC_PLT_CLK[1] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[098] PMC_PLT_CLK[2] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[099] PMC_PLT_CLK[3] - - - */ + GPIO_FUNC1, /* GPIO_S0_SC[100] PMC_PLT_CLK[4] - - - */ + GPIO_DEFAULT, /* GPIO_S0_SC[101] PMC_PLT_CLK[5] - - - */ + GPIO_END +}; + +/* SSUS GPIOs (GPIO_S5) */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_DEFAULT, /* GPIO_S5[00] RESERVED - - - */ + GPIO_DEFAULT, /* GPIO_S5[01] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[1]# */ + GPIO_DEFAULT, /* GPIO_S5[02] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[2]# */ + GPIO_DEFAULT, /* GPIO_S5[03] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[3]# */ + GPIO_DEFAULT, /* GPIO_S5[04] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[05] PMC_SUSCLK[1] RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[06] PMC_SUSCLK[2] RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[07] PMC_SUSCLK[3] RESERVED RESERVED RESERVED */ + GPIO_NC, /* GPIO_S5[08] RESERVED RESERVED RESERVED RESERVED */ + GPIO_NC, /* GPIO_S5[09] RESERVED RESERVED RESERVED RESERVED */ + GPIO_NC, /* GPIO_S5[10] RESERVED RESERVED RESERVED - */ + GPIO_DEFAULT, /* PMC_SUSPWRDNACK GPIO_S5[11] - - - */ + GPIO_FUNC0, /* PMC_SUSCLK[0] GPIO_S5[12] - - - */ + GPIO_FUNC1, /* RESERVED GPIO_S5[13] - - - */ + GPIO_FUNC1, /* RESERVED GPIO_S5[14] USB_ULPI_RST# - - */ + GPIO_FUNC0, /* PMC_WAKE_PCIE[0]# GPIO_S5[15] - - - */ + GPIO_FUNC0, /* PMC_PWRBTN# GPIO_S5[16] - - - */ + GPIO_DEFAULT, /* RESERVED GPIO_S5[17] - - - */ + GPIO_FUNC1, /* PMC_SUS_STAT# GPIO_S5[18] - - - */ + GPIO_FUNC0, /* USB_OC[0]# GPIO_S5[19] - - - */ + GPIO_FUNC0, /* USB_OC[1]# GPIO_S5[20] - - - */ + GPIO_FUNC0, /* PCU_SPI_CS[1]# GPIO_S5[21] - - - */ + GPIO_DEFAULT, /* GPIO_S5[22] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[23] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[24] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[25] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[26] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[27] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[28] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[29] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[30] RESERVED RESERVED RESERVED RESERVED */ + GPIO_DEFAULT, /* GPIO_S5[31] USB_ULPI_CLK RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[32] USB_ULPI_DATA[0] RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[33] USB_ULPI_DATA[1] RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[34] USB_ULPI_DATA[2] RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[35] USB_ULPI_DATA[3] RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[36] USB_ULPI_DATA[4] RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[37] USB_ULPI_DATA[5] RESERVED RESERVED - */ + GPIO_NC, /* GPIO_S5[38] USB_ULPI_DATA[6] RESERVED RESERVED - */ + GPIO_NC, /* GPIO_S5[39] USB_ULPI_DATA[7] RESERVED RESERVED - */ + GPIO_NC, /* GPIO_S5[40] USB_ULPI_DIR RESERVED RESERVED - */ + GPIO_NC, /* GPIO_S5[41] USB_ULPI_NXT RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[42] USB_ULPI_STP RESERVED RESERVED - */ + GPIO_DEFAULT, /* GPIO_S5[43] USB_ULPI_REFCLK RESERVED RESERVED - */ + GPIO_END +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = NULL, + .sus_dirq = NULL, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.c b/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.c new file mode 100644 index 0000000..552be8f --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.c @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "irqroute.h" + +DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.h b/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.h new file mode 100644 index 0000000..08552c5 --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/irqroute.h @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef IRQROUTE_H +#define IRQROUTE_H + +#include <soc/intel/fsp_baytrail/baytrail/irq.h> +#include <soc/intel/fsp_baytrail/baytrail/pci_devs.h> + +/* + *IR02h GFX INT(A) - PIRQ A + *IR10h EMMC INT(ABCD) - PIRQ DEFG + *IR11h SDIO INT(A) - PIRQ B + *IR12h SD INT(A) - PIRQ C + *IR13h SATA INT(A) - PIRQ D + *IR14h XHCI INT(A) - PIRQ E + *IR15h LP Audio INT(A) - PIRQ F + *IR17h MMC INT(A) - PIRQ F + *IR18h SIO INT(ABCD) - PIRQ BADC + *IR1Ah TXE INT(A) - PIRQ F + *IR1Bh HD Audio INT(A) - PIRQ G + *IR1Ch PCIe INT(ABCD) - PIRQ EFGH + *IR1Dh EHCI INT(A) - PIRQ D + *IR1Eh SIO INT(ABCD) - PIRQ BDEF + *IR1Fh LPC INT(ABCD) - PIRQ HGBC + */ +#define PCI_DEV_PIRQ_ROUTES \ + PCI_DEV_PIRQ_ROUTE(GFX_DEV, A, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(EMMC_DEV, D, E, F, G), \ + PCI_DEV_PIRQ_ROUTE(SDIO_DEV, B, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SD_DEV, C, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SATA_DEV, D, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(XHCI_DEV, E, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(LPE_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(MMC45_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SIO1_DEV, B, A, D, C), \ + PCI_DEV_PIRQ_ROUTE(TXE_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(HDA_DEV, G, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(PCIE_DEV, E, F, G, H), \ + PCI_DEV_PIRQ_ROUTE(EHCI_DEV, D, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SIO2_DEV, B, D, E, F), \ + PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) + +/* + * Route each PIRQ[A-H] to a PIC IRQ[0-15] + * Reserved: 0, 1, 2, 8, 13 + * PS2 keyboard: 12 + * ACPI/SCI: 9 + * Floppy: 6 + */ +#define PIRQ_PIC_ROUTES \ + PIRQ_PIC(A, 4), \ + PIRQ_PIC(B, 5), \ + PIRQ_PIC(C, 7), \ + PIRQ_PIC(D, 10), \ + PIRQ_PIC(E, 11), \ + PIRQ_PIC(F, 12), \ + PIRQ_PIC(G, 14), \ + PIRQ_PIC(H, 15) + +#endif /* IRQROUTE_H */ diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/mainboard.c b/src/mainboard/intel/bayley_bay_crb_fsp/mainboard.c new file mode 100644 index 0000000..feae6ef --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/mainboard.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#if CONFIG_VGA_ROM_RUN +#include <x86emu/x86emu.h> +#endif +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> + +/* + * mainboard_enable is executed as first thing after enumerate_buses(). + * This is the earliest point to add customization. + */ +static void mainboard_enable(device_t dev) +{ + +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/romstage.c b/src/mainboard/intel/bayley_bay_crb_fsp/romstage.c new file mode 100644 index 0000000..944292b --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/romstage.c @@ -0,0 +1,181 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stddef.h> +#include <arch/cpu.h> +#include <lib.h> +#include <arch/io.h> +#include <arch/cbfs.h> +#include <arch/stages.h> +#include <console/console.h> +#include <cbmem.h> +#include <cpu/x86/mtrr.h> +#include <romstage_handoff.h> +#include <timestamp.h> +#include <baytrail/gpio.h> +#include <baytrail/iomap.h> +#include <baytrail/lpc.h> +#include <baytrail/pci_devs.h> +#include <baytrail/romstage.h> +#include <baytrail/acpi.h> +#include <baytrail/baytrail.h> +#include <drivers/intel/fsp/fsp_util.h> + +/** + * /brief mainboard call for setup that needs to be done before fsp init + * + */ +void early_mainboard_romstage_entry() +{ + +} + +/** + * Get function disables - most of these will be done automatically + * @param fd_mask + * @param fd2_mask + */ +void get_func_disables(uint32_t *fd_mask, uint32_t *fd2_mask) +{ + +} + +/** + * /brief mainboard call for setup that needs to be done after fsp init + * + */ +void late_mainboard_romstage_entry() +{ + +} + +const uint32_t mAzaliaVerbTableData13[] = { +/* + *ALC262 Verb Table - 10EC0262 + */ + /* Pin Complex (NID 0x11 ) */ + 0x01171CF0, + 0x01171D11, + 0x01171E11, + 0x01171F41, + /* Pin Complex (NID 0x12 ) */ + 0x01271CF0, + 0x01271D11, + 0x01271E11, + 0x01271F41, + /* Pin Complex (NID 0x14 ) */ + 0x01471C10, + 0x01471D40, + 0x01471E01, + 0x01471F01, + /* Pin Complex (NID 0x15 ) */ + 0x01571CF0, + 0x01571D11, + 0x01571E11, + 0x01571F41, + /* Pin Complex (NID 0x16 ) */ + 0x01671CF0, + 0x01671D11, + 0x01671E11, + 0x01671F41, + /* Pin Complex (NID 0x18 ) */ + 0x01871C20, + 0x01871D98, + 0x01871EA1, + 0x01871F01, + /* Pin Complex (NID 0x19 ) */ + 0x01971C21, + 0x01971D98, + 0x01971EA1, + 0x01971F02, + /* Pin Complex (NID 0x1A ) */ + 0x01A71C2F, + 0x01A71D30, + 0x01A71E81, + 0x01A71F01, + /* Pin Complex (NID 0x1B ) */ + 0x01B71C1F, + 0x01B71D40, + 0x01B71E21, + 0x01B71F02, + /* Pin Complex (NID 0x1C ) */ + 0x01C71CF0, + 0x01C71D11, + 0x01C71E11, + 0x01C71F41, + /* Pin Complex (NID 0x1D ) */ + 0x01D71C01, + 0x01D71DC6, + 0x01D71E14, + 0x01D71F40, + /* Pin Complex (NID 0x1E ) */ + 0x01E71CF0, + 0x01E71D11, + 0x01E71E11, + 0x01E71F41, + /* Pin Complex (NID 0x1F ) */ + 0x01F71CF0, + 0x01F71D11, + 0x01F71E11, + 0x01F71F41 }; + +const PCH_AZALIA_VERB_TABLE mAzaliaVerbTable[] = { { +/* + * VerbTable: (RealTek ALC262) + * Revision ID = 0xFF, support all steps + * Codec Verb Table For AZALIA + * Codec Address: CAd value (0/1/2) + * Codec Vendor: 0x10EC0262 + */ + { + 0x10EC0262, /* Vendor ID/Device IDA */ + 0x0000, /* SubSystem ID */ + 0xFF, /* Revision IDA */ + 0x01, /* Front panel support (1=yes, 2=no) */ + 0x000B, /* Number of Rear Jacks = 11 */ + 0x0002 /* Number of Front Jacks = 2 */ + }, + (uint32_t *)mAzaliaVerbTableData13 } }; + +const PCH_AZALIA_CONFIG mainboard_AzaliaConfig = { + .Pme = 1, + .DS = 1, + .DA = 0, + .HdmiCodec = 1, + .AzaliaVCi = 1, + .Rsvdbits = 0, + .AzaliaVerbTableNum = 1, + .AzaliaVerbTable = (PCH_AZALIA_VERB_TABLE *)mAzaliaVerbTable, + .ResetWaitTimer = 300 }; + +/** /brief customize fsp parameters here if needed + */ +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) +{ + UPD_DATA_REGION *UpdData = FspRtBuffer->Common.UpdDataRgnPtr; + + /* Initialize the Azalia Verb Tables to mainboard specific version */ + UpdData->AzaliaConfigPtr = (UINT32)&mainboard_AzaliaConfig; + + /* Disable 2nd DIMM on Bakersport*/ +#if IS_ENABLED(BOARD_INTEL_BAKERSPORT_CRB_FSP) + UpdData->PcdMrcInitSPDAddr2 = 0x00; /* cannot use SPD_ADDR_DISABLED at this point */ +#endif +} diff --git a/src/mainboard/intel/bayley_bay_crb_fsp/thermal.h b/src/mainboard/intel/bayley_bay_crb_fsp/thermal.h new file mode 100644 index 0000000..78dfcbe --- /dev/null +++ b/src/mainboard/intel/bayley_bay_crb_fsp/thermal.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_THERMAL_H +#define MAINBOARD_THERMAL_H + + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif /* MAINBOARD_THERMAL_H */ diff --git a/src/mainboard/intel/bayleybay_fsp/Kconfig b/src/mainboard/intel/bayleybay_fsp/Kconfig deleted file mode 100644 index 384a2db..0000000 --- a/src/mainboard/intel/bayleybay_fsp/Kconfig +++ /dev/null @@ -1,103 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_INTEL_BAYLEYBAY_FSP - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SOC_INTEL_FSP_BAYTRAIL - select BOARD_ROMSIZE_KB_2048 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select OVERRIDE_MRC_CACHE_LOC - select POST_IO - select INCLUDE_MICROCODE_IN_BUILD if FSP_PACKAGE_DEFAULT - select ENABLE_BUILTIN_COM1 if FSP_PACKAGE_DEFAULT - select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT - select DEFAULT_CONSOLE_LOGLEVEL_7 if FSP_PACKAGE_DEFAULT - select TSC_MONOTONIC_TIMER - -config MAINBOARD_DIR - string - default "intel/bayleybay_fsp" - -config INCLUDE_ME - bool - default n - -config LOCK_MANAGEMENT_ENGINE - bool - default n - -config MAINBOARD_PART_NUMBER - string - default "Bayley Bay CRB (FSP)" - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config CACHE_ROM_SIZE_OVERRIDE - hex - default 0x800000 - -config FSP_FILE - string - default "../intel/fsp/baytrail/BAYTRAIL_FSP.fd" - -config MRC_CACHE_LOC_OVERRIDE - hex - default 0xfff80000 - depends on ENABLE_FSP_FAST_BOOT - -config CBFS_SIZE - hex - default 0x00200000 - -config DRIVERS_PS2_KEYBOARD - bool - default n - -config CONSOLE_POST - bool - default y - -config ENABLE_FSP_FAST_BOOT - bool - depends on HAVE_FSP_BIN - default y - -config VIRTUAL_ROM_SIZE - hex - depends on ENABLE_FSP_FAST_BOOT - default 0x800000 - -config FSP_PACKAGE_DEFAULT - bool "Configure defaults for the Intel FSP package" - default n - -config VGA_BIOS - bool - default y if FSP_PACKAGE_DEFAULT - -endif # BOARD_INTEL_BAYLEYBAY_FSP diff --git a/src/mainboard/intel/bayleybay_fsp/Makefile.inc b/src/mainboard/intel/bayleybay_fsp/Makefile.inc deleted file mode 100644 index 2f7a8c5..0000000 --- a/src/mainboard/intel/bayleybay_fsp/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += gpio.c -ramstage-y += irqroute.c diff --git a/src/mainboard/intel/bayleybay_fsp/acpi/ec.asl b/src/mainboard/intel/bayleybay_fsp/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/bayleybay_fsp/acpi/mainboard.asl b/src/mainboard/intel/bayleybay_fsp/acpi/mainboard.asl deleted file mode 100644 index c1884c5..0000000 --- a/src/mainboard/intel/bayleybay_fsp/acpi/mainboard.asl +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) -} diff --git a/src/mainboard/intel/bayleybay_fsp/acpi/superio.asl b/src/mainboard/intel/bayleybay_fsp/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/bayleybay_fsp/acpi_tables.c b/src/mainboard/intel/bayleybay_fsp/acpi_tables.c deleted file mode 100644 index 5f81e26..0000000 --- a/src/mainboard/intel/bayleybay_fsp/acpi_tables.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> -#include <baytrail/acpi.h> -#include <baytrail/nvs.h> -#include <baytrail/iomap.h> - - -extern const unsigned char AmlCode[]; - -static void acpi_create_gnvs(global_nvs_t *gnvs) -{ - acpi_init_gnvs(gnvs); - - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* Disable USB ports in S5 */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* TPM Present */ - gnvs->tpmp = 0; - - /* Enable DPTF */ - gnvs->dpte = 0; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - current = acpi_madt_irq_overrides(current); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, - const char *oem_table_id) -{ - generate_cpu_entries(); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -#define ALIGN_CURRENT current = (ALIGN(current, 16)) -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - int i; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_xsdt_t *xsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_mcfg_t *mcfg; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *dsdt; - global_nvs_t *gnvs; - - current = start; - - /* Align ACPI tables to 16byte */ - ALIGN_CURRENT; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - ALIGN_CURRENT; - xsdt = (acpi_xsdt_t *) current; - current += sizeof(acpi_xsdt_t); - ALIGN_CURRENT; - - /* clear all table memory */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, xsdt); - acpi_write_rsdt(rsdt); - acpi_write_xsdt(xsdt); - - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - ALIGN_CURRENT; - acpi_create_facs(facs); - printk(BIOS_DEBUG, "ACPI: * FACS @ %p Length %x", facs, - facs->length); - - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - ALIGN_CURRENT; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x", dsdt, - dsdt->length); - - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - ALIGN_CURRENT; - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - printk(BIOS_DEBUG, "ACPI: * FADT @ %p Length %x", fadt, - fadt->header.length); - - /* - * We explicitly add these tables later on: - */ - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - ALIGN_CURRENT; - acpi_create_intel_hpet(hpet); - acpi_add_table(rsdp, hpet); - printk(BIOS_DEBUG, "ACPI: * HPET @ %p Length %x\n", hpet, - hpet->header.length); - - /* If we want to use HPET Timers Linux wants an MADT */ - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, madt); - printk(BIOS_DEBUG, "ACPI: * MADT @ %p Length %x\n",madt, - madt->header.length); - - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, mcfg); - printk(BIOS_DEBUG, "ACPI: * MCFG @ %p Length %x\n",mcfg, - mcfg->header.length); - - /* Update GNVS pointer into CBMEM */ - gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); - if (!gnvs) { - printk(BIOS_DEBUG, "ACPI: Could not find CBMEM GNVS\n"); - gnvs = (global_nvs_t *)current; - } - - for (i=0; i < dsdt->length; i++) { - if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " - "DSDT at offset 0x%04x -> %p\n", i, gnvs); - *(u32*)(((u32)dsdt) + i) = (unsigned long)gnvs; - acpi_save_gnvs((unsigned long)gnvs); - break; - } - } - - /* And fill it */ - acpi_create_gnvs(gnvs); - - /* And tell SMI about it */ -#if CONFIG_HAVE_SMI_HANDLER - smm_setup_structures(gnvs, NULL, NULL); -#endif - - current += sizeof(global_nvs_t); - ALIGN_CURRENT; - - /* We patched up the DSDT, so we need to recalculate the checksum */ - dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - - printk(BIOS_DEBUG, "ACPI Updated DSDT @ %p Length %x\n", dsdt, - dsdt->length); - - ssdt = (acpi_header_t *)current; - memset(ssdt, 0, sizeof(acpi_header_t)); - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - if (ssdt->length) { - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - printk(BIOS_DEBUG, "ACPI: * SSDT @ %p Length %x\n",ssdt, - ssdt->length); - ALIGN_CURRENT; - } else { - ssdt = NULL; - printk(BIOS_DEBUG, "ACPI: * SSDT not generated.\n"); - } - - ssdt2 = (acpi_header_t *)current; - memset(ssdt2, 0, sizeof(acpi_header_t)); - acpi_create_serialio_ssdt(ssdt2); - if (ssdt2->length) { - current += ssdt2->length; - acpi_add_table(rsdp, ssdt2); - printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2, - ssdt2->length); - ALIGN_CURRENT; - } else { - ssdt2 = NULL; - printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n"); - } - - printk(BIOS_DEBUG, "current = %lx\n", current); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/intel/bayleybay_fsp/board_info.txt b/src/mainboard/intel/bayleybay_fsp/board_info.txt deleted file mode 100644 index 501a6a4..0000000 --- a/src/mainboard/intel/bayleybay_fsp/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: Bayley Bay -Category: eval -ROM protocol: SPI -ROM socketed: n diff --git a/src/mainboard/intel/bayleybay_fsp/cmos.layout b/src/mainboard/intel/bayleybay_fsp/cmos.layout deleted file mode 100644 index 115dcb5..0000000 --- a/src/mainboard/intel/bayleybay_fsp/cmos.layout +++ /dev/null @@ -1,132 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/bayleybay_fsp/devicetree.cb b/src/mainboard/intel/bayleybay_fsp/devicetree.cb deleted file mode 100644 index 356c8df..0000000 --- a/src/mainboard/intel/bayleybay_fsp/devicetree.cb +++ /dev/null @@ -1,81 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip soc/intel/fsp_baytrail - - #### ACPI Register Settings #### - register "fadt_pm_profile" = "PM_MOBILE" - register "fadt_boot_arch" = "ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042" - - #### FSP register settings #### - register "SataMode" = "SATA_MODE_AHCI" - register "MrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" - register "MrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" - register "MrcInitTsegSize" = "TSEG_SIZE_8_MB" - register "MrcInitMmioSize" = "MMIO_SIZE_DEFAULT" - register "eMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" - register "IgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" - register "ApertureSize" = "APERTURE_SIZE_DEFAULT" - register "GttSize" = "GTT_SIZE_DEFAULT" - register "LpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" - register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" - register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # 8086 0F00 - SoC router - device pci 02.0 on end # 8086 0F31 - GFX - device pci 03.0 off end # 8086 0F38 - MIPI - camera interface - - device pci 10.0 off end # 8086 0F14 - EMMC 4.1 Port (MMC1 pins) - (DO NOT USE) - Only 1 EMMC port at a time - device pci 11.0 on end # 8086 0F15 - SDIO Port (SD2 pins) - device pci 12.0 on end # 8086 0F16 - SD Port (SD3 pins) - device pci 13.0 on end # 8086 0F23 - SATA AHCI (0F20, 0F21, 0F22, 0F23) - device pci 14.0 on end # 8086 0F35 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 off end # 8086 0F28 - LP Engine Audio - device pci 16.0 off end # 8086 0F37 - OTG controller - device pci 17.0 on end # 8086 0F50 - EMMC 4.5 Port (MMC1 pins) - Only 1 EMMC port at a time - device pci 18.0 on end # 8086 0F40 - SIO - DMA - device pci 18.1 on end # 8086 0F41 - I2C Port 1 - device pci 18.2 on end # 8086 0F42 - I2C Port 2 - device pci 18.3 on end # 8086 0F43 - I2C Port 3 - device pci 18.4 on end # 8086 0F44 - I2C Port 4 - device pci 18.5 on end # 8086 0F45 - I2C Port 5 - device pci 18.6 on end # 8086 0F46 - I2C Port 6 - device pci 18.7 on end # 8086 0F47 - I2C Port 7 - device pci 1a.0 on end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0F48 - PCIe Root Port 1 (x4 slot) - device pci 1c.1 on end # 8086 0F4A - PCIe Root Port 2 (half mini pcie slot) - device pci 1c.2 on end # 8086 0F4C - PCIe Root Port 3 (front x1 slot) - device pci 1c.3 on end # 8086 0F4E - PCIe Root Port 4 (rear x1 slot) - device pci 1d.0 off end # 8086 0F34 - USB EHCI - Only 1 USB controller at a time - device pci 1e.0 on end # 8086 0F06 - SIO - DMA - device pci 1e.1 on end # 8086 0F08 - PWM 1 - device pci 1e.2 on end # 8086 0F09 - PWM 2 - device pci 1e.3 on end # 8086 0F0A - HSUART 1 - device pci 1e.4 on end # 8086 0F0C - HSUART 2 - device pci 1e.5 on end # 8086 0F0E - SPI - device pci 1f.0 on end # 8086 0F1C - LPC bridge - device pci 1f.3 on end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/intel/bayleybay_fsp/dsdt.asl b/src/mainboard/intel/bayleybay_fsp/dsdt.asl deleted file mode 100644 index cb2a4da..0000000 --- a/src/mainboard/intel/bayleybay_fsp/dsdt.asl +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define INCLUDE_LPE 1 -#define INCLUDE_SCC 1 -#define INCLUDE_EHCI 1 -#define INCLUDE_XHCI 1 -#define INCLUDE_LPSS 1 - - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include <soc/intel/fsp_baytrail/acpi/platform.asl> - - // global NVS and variables - #include <soc/intel/fsp_baytrail/acpi/globalnvs.asl> - - #include <soc/intel/fsp_baytrail/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <soc/intel/fsp_baytrail/acpi/southcluster.asl> - } - } - - /* Chipset specific sleep states */ - #include <soc/intel/fsp_baytrail/acpi/sleepstates.asl> - - #include "acpi/mainboard.asl" -} diff --git a/src/mainboard/intel/bayleybay_fsp/fadt.c b/src/mainboard/intel/bayleybay_fsp/fadt.c deleted file mode 100644 index 29d0c1d..0000000 --- a/src/mainboard/intel/bayleybay_fsp/fadt.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/acpi.h> -#include <baytrail/acpi.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - acpi_fill_in_fadt(fadt,facs,dsdt); - - /* Platform specific customizations go here */ - - header->checksum = 0; - header->checksum = - acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/intel/bayleybay_fsp/gpio.c b/src/mainboard/intel/bayleybay_fsp/gpio.c deleted file mode 100644 index ead4abc..0000000 --- a/src/mainboard/intel/bayleybay_fsp/gpio.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdlib.h> -#include <baytrail/gpio.h> -#include "irqroute.h" - -/* NCORE GPIOs */ -static const struct soc_gpio_map gpncore_gpio_map[] = { - GPIO_FUNC2, /* GPIO 0 */ - GPIO_FUNC2, /* GPIO 1 */ - GPIO_FUNC2, /* GPIO 2 */ - GPIO_FUNC2, /* GPIO 3 */ - GPIO_FUNC2, /* GPIO 4 */ - GPIO_FUNC2, /* GPIO 5 */ - GPIO_FUNC2, /* GPIO 6 */ - GPIO_FUNC2, /* GPIO 7 */ - GPIO_FUNC2, /* GPIO 8 */ - GPIO_FUNC2, /* GPIO 9 */ - GPIO_FUNC2, /* GPIO 10 */ - GPIO_FUNC2, /* GPIO 11 */ - GPIO_FUNC2, /* GPIO 12 */ - GPIO_FUNC2, /* GPIO 13 */ - GPIO_FUNC2, /* GPIO 14 */ - GPIO_FUNC2, /* GPIO 15 */ - GPIO_FUNC2, /* GPIO 16 */ - GPIO_FUNC2, /* GPIO 17 */ - GPIO_FUNC2, /* GPIO 18 */ - GPIO_FUNC2, /* GPIO 19 */ - GPIO_FUNC2, /* GPIO 20 */ - GPIO_FUNC2, /* GPIO 21 */ - GPIO_FUNC2, /* GPIO 22 */ - GPIO_FUNC2, /* GPIO 23 */ - GPIO_FUNC2, /* GPIO 24 */ - GPIO_FUNC2, /* GPIO 25 */ - GPIO_FUNC2, /* GPIO 26 */ - GPIO_END -}; - -/* SCORE GPIOs (GPIO_S0_SC_XX)*/ -static const struct soc_gpio_map gpscore_gpio_map[] = { - GPIO_FUNC1, /* GPIO_S0_SC[000] SATA_GP[0] - - - */ - GPIO_FUNC2, /* GPIO_S0_SC[001] SATA_GP[1] SATA_DEVSLP[0] - - */ - GPIO_FUNC1, /* GPIO_S0_SC[002] SATA_LED# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[003] PCIE_CLKREQ[0]# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[004] PCIE_CLKREQ[1]# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[005] PCIE_CLKREQ[2]# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[006] PCIE_CLKREQ[3]# - - - */ - GPIO_NC, /* GPIO_S0_SC[007] RESERVED SD3_WP - - */ - GPIO_FUNC2, /* GPIO_S0_SC[008] I2S0_CLK HDA_RST# - - */ - GPIO_FUNC2, /* GPIO_S0_SC[009] I2S0_FRM HDA_SYNC - - */ - GPIO_FUNC2, /* GPIO_S0_SC[010] I2S0_DATAOUT HDA_CLK - - */ - GPIO_FUNC2, /* GPIO_S0_SC[011] I2S0_DATAIN HDA_SDO - - */ - GPIO_FUNC2, /* GPIO_S0_SC[012] I2S1_CLK HDA_SDI[0] - - */ - GPIO_NC, /* GPIO_S0_SC[013] I2S1_FRM HDA_SDI[1] - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[014] I2S1_DATAOUT RESERVED - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[015] I2S1_DATAIN RESERVED - - */ - GPIO_NC, /* GPIO_S0_SC[016] MMC1_CLK - MMC1_45_CLK - */ - GPIO_NC, /* GPIO_S0_SC[017] MMC1_D[0] - MMC1_45_D[0] - */ - GPIO_NC, /* GPIO_S0_SC[018] MMC1_D[1] - MMC1_45_D[1] - */ - GPIO_NC, /* GPIO_S0_SC[019] MMC1_D[2] - MMC1_45_D[2] - */ - GPIO_NC, /* GPIO_S0_SC[020] MMC1_D[3] - MMC1_45_D[3] - */ - GPIO_NC, /* GPIO_S0_SC[021] MMC1_D[4] - MMC1_45_D[4] - */ - GPIO_NC, /* GPIO_S0_SC[022] MMC1_D[5] - MMC1_45_D[5] - */ - GPIO_NC, /* GPIO_S0_SC[023] MMC1_D[6] - MMC1_45_D[6] - */ - GPIO_NC, /* GPIO_S0_SC[024] MMC1_D[7] - MMC1_45_D[7] - */ - GPIO_NC, /* GPIO_S0_SC[025] MMC1_CMD - MMC1_45_CMD - */ - GPIO_NC, /* GPIO_S0_SC[026] MMC1_RST# SATA_DEVSLP[0] MMC1_45_RST# - */ - GPIO_FUNC1, /* GPIO_S0_SC[027] SD2_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[028] SD2_D[0] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[029] SD2_D[1] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[030] SD2_D[2] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[031] SD2_D[3]_CD# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[032] SD2_CMD - - - */ - GPIO_NC, /* GPIO_S0_SC[033] SD3_CLK - - - */ - GPIO_NC, /* GPIO_S0_SC[034] SD3_D[0] - - - */ - GPIO_NC, /* GPIO_S0_SC[035] SD3_D[1] - - - */ - GPIO_NC, /* GPIO_S0_SC[036] SD3_D[2] - - - */ - GPIO_NC, /* GPIO_S0_SC[037] SD3_D[3] - - - */ - GPIO_NC, /* GPIO_S0_SC[038] SD3_CD# - - - */ - GPIO_NC, /* GPIO_S0_SC[039] SD3_CMD - - - */ - GPIO_NC, /* GPIO_S0_SC[040] SD3_1P8EN - - - */ - GPIO_NC, /* GPIO_S0_SC[041] SD3_PWREN# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[042] ILB_LPC_AD[0] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[043] ILB_LPC_AD[1] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[044] ILB_LPC_AD[2] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[045] ILB_LPC_AD[3] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[046] ILB_LPC_FRAME# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[047] ILB_LPC_CLK[0] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[048] ILB_LPC_CLK[1] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[049] ILB_LPC_CLKRUN# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[050] ILB_LPC_SERIRQ - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[051] PCU_SMB_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[052] PCU_SMB_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[053] PCU_SMB_ALERT# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[054] ILB_8254_SPKR RESERVED - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[055] RESERVED - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[056] RESERVED - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[057] PCU_UART_TXD - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[058] RESERVED - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[059] RESERVED - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[060] RESERVED - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[061] PCU_UART_RXD - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[062] LPE_I2S2_CLK SATA_DEVSLP[1] RESERVED - */ - GPIO_FUNC1, /* GPIO_S0_SC[063] LPE_I2S2_FRM RESERVED - - */ - GPIO_FUNC1, /* GPIO_S0_SC[064] LPE_I2S2_DATAIN - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[065] LPE_I2S2_DATAOUT - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[066] SIO_SPI_CS# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[067] SIO_SPI_MISO - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[068] SIO_SPI_MOSI - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[069] SIO_SPI_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[070] SIO_UART1_RXD RESERVED - - */ - GPIO_FUNC1, /* GPIO_S0_SC[071] SIO_UART1_TXD RESERVED - - */ - GPIO_FUNC1, /* GPIO_S0_SC[072] SIO_UART1_RTS# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[073] SIO_UART1_CTS# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[074] SIO_UART2_RXD - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[075] SIO_UART2_TXD - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[076] SIO_UART2_RTS# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[077] SIO_UART2_CTS# - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[078] SIO_I2C0_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[079] SIO_I2C0_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[080] SIO_I2C1_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[081] SIO_I2C1_CLK RESERVED - - */ - GPIO_FUNC1, /* GPIO_S0_SC[082] SIO_I2C2_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[083] SIO_I2C2_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[084] SIO_I2C3_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[085] SIO_I2C3_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[086] SIO_I2C4_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[087] SIO_I2C4_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[088] SIO_I2C5_DATA - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[089] SIO_I2C5_CLK - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[090] SIO_I2C6_DATA ILB_NMI - - */ - GPIO_FUNC1, /* GPIO_S0_SC[091] SIO_I2C6_CLK SD3_WP - - */ - GPIO_FUNC1, /* RESERVED GPIO_S0_SC[092] - - - */ - GPIO_FUNC1, /* RESERVED GPIO_S0_SC[093] - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[094] SIO_PWM[0] - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[095] SIO_PWM[1] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[096] PMC_PLT_CLK[0] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[097] PMC_PLT_CLK[1] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[098] PMC_PLT_CLK[2] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[099] PMC_PLT_CLK[3] - - - */ - GPIO_FUNC1, /* GPIO_S0_SC[100] PMC_PLT_CLK[4] - - - */ - GPIO_DEFAULT, /* GPIO_S0_SC[101] PMC_PLT_CLK[5] - - - */ - GPIO_END -}; - -/* SSUS GPIOs (GPIO_S5) */ -static const struct soc_gpio_map gpssus_gpio_map[] = { - GPIO_DEFAULT, /* GPIO_S5[00] RESERVED - - - */ - GPIO_DEFAULT, /* GPIO_S5[01] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[1]# */ - GPIO_DEFAULT, /* GPIO_S5[02] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[2]# */ - GPIO_DEFAULT, /* GPIO_S5[03] RESERVED RESERVED RESERVED PMC_WAKE_PCIE[3]# */ - GPIO_DEFAULT, /* GPIO_S5[04] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[05] PMC_SUSCLK[1] RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[06] PMC_SUSCLK[2] RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[07] PMC_SUSCLK[3] RESERVED RESERVED RESERVED */ - GPIO_NC, /* GPIO_S5[08] RESERVED RESERVED RESERVED RESERVED */ - GPIO_NC, /* GPIO_S5[09] RESERVED RESERVED RESERVED RESERVED */ - GPIO_NC, /* GPIO_S5[10] RESERVED RESERVED RESERVED - */ - GPIO_DEFAULT, /* PMC_SUSPWRDNACK GPIO_S5[11] - - - */ - GPIO_FUNC0, /* PMC_SUSCLK[0] GPIO_S5[12] - - - */ - GPIO_FUNC1, /* RESERVED GPIO_S5[13] - - - */ - GPIO_FUNC1, /* RESERVED GPIO_S5[14] USB_ULPI_RST# - - */ - GPIO_FUNC0, /* PMC_WAKE_PCIE[0]# GPIO_S5[15] - - - */ - GPIO_FUNC0, /* PMC_PWRBTN# GPIO_S5[16] - - - */ - GPIO_DEFAULT, /* RESERVED GPIO_S5[17] - - - */ - GPIO_FUNC1, /* PMC_SUS_STAT# GPIO_S5[18] - - - */ - GPIO_FUNC0, /* USB_OC[0]# GPIO_S5[19] - - - */ - GPIO_FUNC0, /* USB_OC[1]# GPIO_S5[20] - - - */ - GPIO_FUNC0, /* PCU_SPI_CS[1]# GPIO_S5[21] - - - */ - GPIO_DEFAULT, /* GPIO_S5[22] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[23] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[24] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[25] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[26] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[27] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[28] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[29] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[30] RESERVED RESERVED RESERVED RESERVED */ - GPIO_DEFAULT, /* GPIO_S5[31] USB_ULPI_CLK RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[32] USB_ULPI_DATA[0] RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[33] USB_ULPI_DATA[1] RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[34] USB_ULPI_DATA[2] RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[35] USB_ULPI_DATA[3] RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[36] USB_ULPI_DATA[4] RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[37] USB_ULPI_DATA[5] RESERVED RESERVED - */ - GPIO_NC, /* GPIO_S5[38] USB_ULPI_DATA[6] RESERVED RESERVED - */ - GPIO_NC, /* GPIO_S5[39] USB_ULPI_DATA[7] RESERVED RESERVED - */ - GPIO_NC, /* GPIO_S5[40] USB_ULPI_DIR RESERVED RESERVED - */ - GPIO_NC, /* GPIO_S5[41] USB_ULPI_NXT RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[42] USB_ULPI_STP RESERVED RESERVED - */ - GPIO_DEFAULT, /* GPIO_S5[43] USB_ULPI_REFCLK RESERVED RESERVED - */ - GPIO_END -}; - -static struct soc_gpio_config gpio_config = { - .ncore = gpncore_gpio_map, - .score = gpscore_gpio_map, - .ssus = gpssus_gpio_map, - .core_dirq = NULL, - .sus_dirq = NULL, -}; - -struct soc_gpio_config* mainboard_get_gpios(void) -{ - return &gpio_config; -} diff --git a/src/mainboard/intel/bayleybay_fsp/irqroute.c b/src/mainboard/intel/bayleybay_fsp/irqroute.c deleted file mode 100644 index 552be8f..0000000 --- a/src/mainboard/intel/bayleybay_fsp/irqroute.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "irqroute.h" - -DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/bayleybay_fsp/irqroute.h b/src/mainboard/intel/bayleybay_fsp/irqroute.h deleted file mode 100644 index 08552c5..0000000 --- a/src/mainboard/intel/bayleybay_fsp/irqroute.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef IRQROUTE_H -#define IRQROUTE_H - -#include <soc/intel/fsp_baytrail/baytrail/irq.h> -#include <soc/intel/fsp_baytrail/baytrail/pci_devs.h> - -/* - *IR02h GFX INT(A) - PIRQ A - *IR10h EMMC INT(ABCD) - PIRQ DEFG - *IR11h SDIO INT(A) - PIRQ B - *IR12h SD INT(A) - PIRQ C - *IR13h SATA INT(A) - PIRQ D - *IR14h XHCI INT(A) - PIRQ E - *IR15h LP Audio INT(A) - PIRQ F - *IR17h MMC INT(A) - PIRQ F - *IR18h SIO INT(ABCD) - PIRQ BADC - *IR1Ah TXE INT(A) - PIRQ F - *IR1Bh HD Audio INT(A) - PIRQ G - *IR1Ch PCIe INT(ABCD) - PIRQ EFGH - *IR1Dh EHCI INT(A) - PIRQ D - *IR1Eh SIO INT(ABCD) - PIRQ BDEF - *IR1Fh LPC INT(ABCD) - PIRQ HGBC - */ -#define PCI_DEV_PIRQ_ROUTES \ - PCI_DEV_PIRQ_ROUTE(GFX_DEV, A, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(EMMC_DEV, D, E, F, G), \ - PCI_DEV_PIRQ_ROUTE(SDIO_DEV, B, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SD_DEV, C, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SATA_DEV, D, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(XHCI_DEV, E, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(LPE_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(MMC45_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SIO1_DEV, B, A, D, C), \ - PCI_DEV_PIRQ_ROUTE(TXE_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(HDA_DEV, G, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(PCIE_DEV, E, F, G, H), \ - PCI_DEV_PIRQ_ROUTE(EHCI_DEV, D, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SIO2_DEV, B, D, E, F), \ - PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) - -/* - * Route each PIRQ[A-H] to a PIC IRQ[0-15] - * Reserved: 0, 1, 2, 8, 13 - * PS2 keyboard: 12 - * ACPI/SCI: 9 - * Floppy: 6 - */ -#define PIRQ_PIC_ROUTES \ - PIRQ_PIC(A, 4), \ - PIRQ_PIC(B, 5), \ - PIRQ_PIC(C, 7), \ - PIRQ_PIC(D, 10), \ - PIRQ_PIC(E, 11), \ - PIRQ_PIC(F, 12), \ - PIRQ_PIC(G, 14), \ - PIRQ_PIC(H, 15) - -#endif /* IRQROUTE_H */ diff --git a/src/mainboard/intel/bayleybay_fsp/mainboard.c b/src/mainboard/intel/bayleybay_fsp/mainboard.c deleted file mode 100644 index feae6ef..0000000 --- a/src/mainboard/intel/bayleybay_fsp/mainboard.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#if CONFIG_VGA_ROM_RUN -#include <x86emu/x86emu.h> -#endif -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> - -/* - * mainboard_enable is executed as first thing after enumerate_buses(). - * This is the earliest point to add customization. - */ -static void mainboard_enable(device_t dev) -{ - -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/bayleybay_fsp/romstage.c b/src/mainboard/intel/bayleybay_fsp/romstage.c deleted file mode 100644 index ef848fa..0000000 --- a/src/mainboard/intel/bayleybay_fsp/romstage.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stddef.h> -#include <arch/cpu.h> -#include <lib.h> -#include <arch/io.h> -#include <arch/cbfs.h> -#include <arch/stages.h> -#include <console/console.h> -#include <cbmem.h> -#include <cpu/x86/mtrr.h> -#include <romstage_handoff.h> -#include <timestamp.h> -#include <baytrail/gpio.h> -#include <baytrail/iomap.h> -#include <baytrail/lpc.h> -#include <baytrail/pci_devs.h> -#include <baytrail/romstage.h> -#include <baytrail/acpi.h> -#include <baytrail/baytrail.h> -#include <drivers/intel/fsp/fsp_util.h> - -/** - * /brief mainboard call for setup that needs to be done before fsp init - * - */ -void early_mainboard_romstage_entry() -{ - -} - -/** - * Get function disables - most of these will be done automatically - * @param fd_mask - * @param fd2_mask - */ -void get_func_disables(uint32_t *fd_mask, uint32_t *fd2_mask) -{ - -} - -/** - * /brief mainboard call for setup that needs to be done after fsp init - * - */ -void late_mainboard_romstage_entry() -{ - -} - -const uint32_t mAzaliaVerbTableData13[] = { -/* - *ALC262 Verb Table - 10EC0262 - */ - /* Pin Complex (NID 0x11 ) */ - 0x01171CF0, - 0x01171D11, - 0x01171E11, - 0x01171F41, - /* Pin Complex (NID 0x12 ) */ - 0x01271CF0, - 0x01271D11, - 0x01271E11, - 0x01271F41, - /* Pin Complex (NID 0x14 ) */ - 0x01471C10, - 0x01471D40, - 0x01471E01, - 0x01471F01, - /* Pin Complex (NID 0x15 ) */ - 0x01571CF0, - 0x01571D11, - 0x01571E11, - 0x01571F41, - /* Pin Complex (NID 0x16 ) */ - 0x01671CF0, - 0x01671D11, - 0x01671E11, - 0x01671F41, - /* Pin Complex (NID 0x18 ) */ - 0x01871C20, - 0x01871D98, - 0x01871EA1, - 0x01871F01, - /* Pin Complex (NID 0x19 ) */ - 0x01971C21, - 0x01971D98, - 0x01971EA1, - 0x01971F02, - /* Pin Complex (NID 0x1A ) */ - 0x01A71C2F, - 0x01A71D30, - 0x01A71E81, - 0x01A71F01, - /* Pin Complex (NID 0x1B ) */ - 0x01B71C1F, - 0x01B71D40, - 0x01B71E21, - 0x01B71F02, - /* Pin Complex (NID 0x1C ) */ - 0x01C71CF0, - 0x01C71D11, - 0x01C71E11, - 0x01C71F41, - /* Pin Complex (NID 0x1D ) */ - 0x01D71C01, - 0x01D71DC6, - 0x01D71E14, - 0x01D71F40, - /* Pin Complex (NID 0x1E ) */ - 0x01E71CF0, - 0x01E71D11, - 0x01E71E11, - 0x01E71F41, - /* Pin Complex (NID 0x1F ) */ - 0x01F71CF0, - 0x01F71D11, - 0x01F71E11, - 0x01F71F41 }; - -const PCH_AZALIA_VERB_TABLE mAzaliaVerbTable[] = { { -/* - * VerbTable: (RealTek ALC262) - * Revision ID = 0xFF, support all steps - * Codec Verb Table For AZALIA - * Codec Address: CAd value (0/1/2) - * Codec Vendor: 0x10EC0262 - */ - { - 0x10EC0262, /* Vendor ID/Device IDA */ - 0x0000, /* SubSystem ID */ - 0xFF, /* Revision IDA */ - 0x01, /* Front panel support (1=yes, 2=no) */ - 0x000B, /* Number of Rear Jacks = 11 */ - 0x0002 /* Number of Front Jacks = 2 */ - }, - (uint32_t *)mAzaliaVerbTableData13 } }; - -const PCH_AZALIA_CONFIG mainboard_AzaliaConfig = { - .Pme = 1, - .DS = 1, - .DA = 0, - .HdmiCodec = 1, - .AzaliaVCi = 1, - .Rsvdbits = 0, - .AzaliaVerbTableNum = 1, - .AzaliaVerbTable = (PCH_AZALIA_VERB_TABLE *)mAzaliaVerbTable, - .ResetWaitTimer = 300 }; - -/** /brief customize fsp parameters here if needed - */ -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - UPD_DATA_REGION *UpdData = FspRtBuffer->Common.UpdDataRgnPtr; - - /* Initialize the Azalia Verb Tables to mainboard specific version */ - UpdData->AzaliaConfigPtr = (UINT32)&mainboard_AzaliaConfig; - - /* Disable 2nd DIMM on Bakersport*/ -#if IS_ENABLED(BOARD_INTEL_BAKERSPORT_FSP) - UpdData->PcdMrcInitSPDAddr2 = 0x00; /* cannot use SPD_ADDR_DISABLED at this point */ -#endif -} diff --git a/src/mainboard/intel/bayleybay_fsp/thermal.h b/src/mainboard/intel/bayleybay_fsp/thermal.h deleted file mode 100644 index 78dfcbe..0000000 --- a/src/mainboard/intel/bayleybay_fsp/thermal.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_THERMAL_H -#define MAINBOARD_THERMAL_H - - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 100 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 90 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif /* MAINBOARD_THERMAL_H */ diff --git a/src/mainboard/intel/cougar_canyon2/Kconfig b/src/mainboard/intel/cougar_canyon2/Kconfig deleted file mode 100644 index 3b25161..0000000 --- a/src/mainboard/intel/cougar_canyon2/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -if BOARD_INTEL_COUGAR_CANYON2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_FSP_IVYBRIDGE - select SOUTHBRIDGE_INTEL_FSP_BD82X6X - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select MMCONF_SUPPORT - select SUPERIO_SMSC_SIO1007 - select ENABLE_VMX - select EARLY_CBMEM_INIT - select BROKEN_CAR_MIGRATE - select INTEL_INT15 - select VGA - -config MAINBOARD_DIR - string - default intel/cougar_canyon2 - -config MAINBOARD_PART_NUMBER - string - default "Cougar Canyon 2" - -config MMCONF_BASE_ADDRESS - hex - default 0xf8000000 # set to match FSP - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config SMBIOS_SYSTEM_ENCLOSURE_TYPE - hex - default 0x09 # This is a mobile platform - -config UDELAY_LAPIC_FIXED_FSB - int - default 100 - -config VIRTUAL_ROM_SIZE - hex - default 0x1000000 - -if HAVE_FSP_BIN - -config VGA_BIOS - bool - default y - -config VGA_BIOS_FILE - string - default "../intel/mainboard/intel/cougar_canyon2/vbios/snm_2170.dat" - -config VGA_BIOS_ID - string - default "8086,0166" - - -endif # HAVE_FSP_BIN - -endif # BOARD_INTEL_COUGAR_CANYON2 diff --git a/src/mainboard/intel/cougar_canyon2/acpi/ec.asl b/src/mainboard/intel/cougar_canyon2/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl b/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl deleted file mode 100644 index 3595e33..0000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 19 }, - - // Network 0:19.0 - Package() { 0x0019ffff, 0, 0, 20 }, - - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 }, - - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - - /* MEI */ - Package() { 0x0016ffff, 0, 0, 16 }, - Package() { 0x0016ffff, 1, 0, 17 }, - - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - Package() { 0x001cffff, 1, 0, 17 }, - Package() { 0x001cffff, 2, 0, 18 }, - Package() { 0x001cffff, 3, 0, 19 }, - - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 23 }, - - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 16 }, - Package() { 0x001fffff, 1, 0, 19 }, - Package() { 0x001fffff, 2, 0, 18 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - - // EHCI #2 0:19.0 - Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - - /* Management Engine Interface */ - Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, - - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl b/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl deleted file mode 100644 index 6b15331..0000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake - Name(_PRW, Package(){0x1d, 0x05}) -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/platform.asl b/src/mainboard/intel/cougar_canyon2/acpi/platform.asl deleted file mode 100644 index 136cc3c..0000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/platform.asl +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // NVS has a flag to determine USB policy in S3 - if (S3U0) { - Store (One, GP47) // Enable USB0 - } Else { - Store (Zero, GP47) // Disable USB0 - } - - // NVS has a flag to determine USB policy in S3 - if (S3U1) { - Store (One, GP56) // Enable USB1 - } Else { - Store (Zero, GP56) // Disable USB1 - } -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/superio.asl b/src/mainboard/intel/cougar_canyon2/acpi/superio.asl deleted file mode 100644 index 81fb948..0000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Values should match those defined in devicetree.cb */ - -#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller -#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR - -#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard -#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse -#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 -#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller -#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 -#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 -#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO -#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 -#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 - -#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/cougar_canyon2/acpi_tables.c b/src/mainboard/intel/cougar_canyon2/acpi_tables.c deleted file mode 100644 index dca35b5..0000000 --- a/src/mainboard/intel/cougar_canyon2/acpi_tables.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> - -#include "southbridge/intel/fsp_bd82x6x/nvs.h" -#include "thermal.h" - -static global_nvs_t *gnvs_; - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; - gnvs->tmax = MAX_TEMPERATURE; - gnvs->flvl = 5; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - gnvs_ = gnvs; - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - gnvs->pcnt = dev_count_cpu(); - - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* - * Enable Front USB ports in S5 by default - * to be consistent with back port behavior - */ - gnvs->s5u0 = 1; - gnvs->s5u1 = 1; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - acpi_update_thermal_table(gnvs); - -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/intel/cougar_canyon2/board_info.txt b/src/mainboard/intel/cougar_canyon2/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/intel/cougar_canyon2/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/intel/cougar_canyon2/cmos.layout b/src/mainboard/intel/cougar_canyon2/cmos.layout deleted file mode 100644 index 2dfa156..0000000 --- a/src/mainboard/intel/cougar_canyon2/cmos.layout +++ /dev/null @@ -1,140 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -411 1 e 8 sata_mode -#412 4 r 0 unused - -# coreboot config options: bootloader -#Used by ChromeOS: -416 128 r 0 vbnv -#544 440 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 AHCI -8 1 Compatible -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/cougar_canyon2/devicetree.cb b/src/mainboard/intel/cougar_canyon2/devicetree.cb deleted file mode 100644 index c499a56..0000000 --- a/src/mainboard/intel/cougar_canyon2/devicetree.cb +++ /dev/null @@ -1,73 +0,0 @@ -chip northbridge/intel/fsp_sandybridge - - # Enable DisplayPort 1 Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DisplayPort 0 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Enable DVI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/fsp_model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - - chip southbridge/intel/fsp_bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - register "sata_port_map" = "0x3f" - - device pci 14.0 on end # XHCI - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 on end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 - device pci 1c.6 on end # PCIe Port #7 - device pci 1c.7 on end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on # LPC bridge - # TODO: insert SIO UART and WDT - end - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # SATA Controller 2 - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/intel/cougar_canyon2/dsdt.asl b/src/mainboard/intel/cougar_canyon2/dsdt.asl deleted file mode 100644 index cedb8a8..0000000 --- a/src/mainboard/intel/cougar_canyon2/dsdt.asl +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include <cpu/intel/fsp_model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/fsp_bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/intel/cougar_canyon2/fadt.c b/src/mainboard/intel/cougar_canyon2/fadt.c deleted file mode 100644 index 5191674..0000000 --- a/src/mainboard/intel/cougar_canyon2/fadt.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = ACPI_FADT_REV_ACPI_3_0; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - fadt->model = 0x00; /* reserved, should be 0 ACPI 3.0 */ - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x00; - fadt->pstate_cnt = 0x00; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; /* 32 bits */ - fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */ - fadt->pm2_cnt_len = 1; /* 8 bits */ - fadt->pm_tmr_len = 4; /* 32 bits */ - fadt->gpe0_blk_len = 16; /* 128 bits */ - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0x00; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 87; - fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ - fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ - fadt->duty_offset = 1; - fadt->duty_width = 0; /* not supported */ - fadt->day_alrm = 0x0D; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->reset_reg.addrl = 0xCF9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ - - fadt->x_firmware_ctl_l = 0x00; /* set to 0 if firmware_ctrl is used */ - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - /* PM1 Status & PM1 Enable */ - fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0; - - fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.access_size = 0; - fadt->x_pm1b_evt_blk.addrl = 0; - fadt->x_pm1b_evt_blk.addrh = 0; - - /* PM1 Control Registers */ - fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x04; - fadt->x_pm1a_cnt_blk.addrh = 0; - - fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.access_size = 0; - fadt->x_pm1b_cnt_blk.addrl = 0; - fadt->x_pm1b_cnt_blk.addrh = 0; - - /* PM2 Control Registers */ - fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0; - - /* PM1 Timer Register */ - fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x08; - fadt->x_pm_tmr_blk.addrh = 0; - - /* General-Purpose Event Registers */ - fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_gpe0_blk.bit_width = 128; /* EventStatus + EventEnable */ - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0; - - fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.access_size = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0; - - header->checksum = - acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/intel/cougar_canyon2/gpio.h b/src/mainboard/intel/cougar_canyon2/gpio.h deleted file mode 100644 index f8f16ca..0000000 --- a/src/mainboard/intel/cougar_canyon2/gpio.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_GPIO_H -#define MAINBOARD_GPIO_H - -#include "southbridge/intel/fsp_bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, /* SINAI */ - .gpio1 = GPIO_MODE_GPIO, /* SMC_SMI */ - .gpio2 = GPIO_MODE_GPIO, /* PIRQE# */ - .gpio3 = GPIO_MODE_GPIO, /* PIRQF# */ - .gpio4 = GPIO_MODE_GPIO, /* PIRQG# */ - .gpio5 = GPIO_MODE_GPIO, /* PIRQH# */ - .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR*/ - .gpio7 = GPIO_MODE_GPIO, /* SMC_SCI# */ - .gpio8 = GPIO_MODE_NONE, /* NOT USED */ - .gpio9 = GPIO_MODE_NATIVE, /* USB OC10-11*/ - .gpio10 = GPIO_MODE_NATIVE, /* USB OC12-13 */ - .gpio11 = GPIO_MODE_GPIO, /* SMB_ALERT*/ - .gpio12 = GPIO_MODE_NATIVE, /* LAN DISABLE */ - .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST */ - .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE */ - .gpio15 = GPIO_MODE_GPIO, /* HOST ALERT */ - .gpio16 = GPIO_MODE_NATIVE, /* SATA4GP */ - .gpio17 = GPIO_MODE_GPIO, /* DGPU POWEROK */ - .gpio18 = GPIO_MODE_NATIVE, /* PCIECLKRQ1# */ - .gpio19 = GPIO_MODE_NATIVE, /* BBS0 */ - .gpio20 = GPIO_MODE_NATIVE, /* CIECLKRQ2# */ - .gpio21 = GPIO_MODE_NATIVE, /* SATA0GP */ - .gpio22 = GPIO_MODE_GPIO, /* BIOS Recovery */ - .gpio23 = GPIO_MODE_NATIVE, /* LDRQ1 */ - .gpio24 = GPIO_MODE_NONE, /* HOST ALERT */ - .gpio25 = GPIO_MODE_NATIVE, /* PCIECLKRQ3# */ - .gpio26 = GPIO_MODE_NATIVE, /* PCIECLKRQ4# */ - .gpio27 = GPIO_MODE_GPIO, /* SATA0 PWR EN */ - .gpio28 = GPIO_MODE_GPIO, /* PLL ODVR */ - .gpio29 = GPIO_MODE_GPIO, /* SLP_LAN# */ - .gpio30 = GPIO_MODE_NATIVE, /* SUS_WARN# */ - .gpio31 = GPIO_MODE_NATIVE, /* ACPRESENT */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_INPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_OUTPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_INPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_INPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_OUTPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_LOW, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_HIGH, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_LOW, - .gpio5 = GPIO_LEVEL_LOW, - .gpio6 = GPIO_LEVEL_HIGH, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_LOW, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_HIGH, - .gpio16 = GPIO_LEVEL_LOW, - .gpio17 = GPIO_LEVEL_LOW, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_HIGH, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_LOW, - .gpio22 = GPIO_LEVEL_HIGH, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio1 = GPIO_INVERT, - .gpio3 = GPIO_INVERT, - .gpio7 = GPIO_INVERT, - .gpio14 = GPIO_INVERT, - .gpio15 = GPIO_INVERT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, /* SIO CLKREQ */ - .gpio33 = GPIO_MODE_NATIVE, /* DOCK ENABLE*/ - .gpio34 = GPIO_MODE_GPIO, /* STP PCI LED */ - .gpio35 = GPIO_MODE_NATIVE, /* SATA POWER EN */ - .gpio36 = GPIO_MODE_NATIVE, /* SATA2 PRESENT DET */ - .gpio37 = GPIO_MODE_NONE, /* NOT USED */ - .gpio38 = GPIO_MODE_GPIO, /* MFG MODE */ - .gpio39 = GPIO_MODE_GPIO, /* GP39 GFX CRB DET */ - .gpio40 = GPIO_MODE_NATIVE, /* USB OC 2-3 */ - .gpio41 = GPIO_MODE_NATIVE, /* USB OC 4-5 */ - .gpio42 = GPIO_MODE_NATIVE, /* USB OC 6-7 */ - .gpio43 = GPIO_MODE_NATIVE, /* USB OC 8-9 */ - .gpio44 = GPIO_MODE_NATIVE, /* PCI SLOT5 CLKREQ5 */ - .gpio45 = GPIO_MODE_NATIVE, /* LAN CLKREQ6 */ - .gpio46 = GPIO_MODE_GPIO, /* PCI SLOT5 CLKREQ5 */ - .gpio47 = GPIO_MODE_NATIVE, /* PEG CLKREQ7 */ - .gpio48 = GPIO_MODE_GPIO, /* SV_ADVANCE_GP48 */ - .gpio49 = GPIO_MODE_GPIO, /* CRIT_TEMP */ - .gpio50 = GPIO_MODE_GPIO, /* DGPU RESET */ - .gpio51 = GPIO_MODE_NONE, /* NOT USED */ - .gpio52 = GPIO_MODE_GPIO, /* DGPU SEL */ - .gpio53 = GPIO_MODE_GPIO, /* DGPU PWM SEL */ - .gpio54 = GPIO_MODE_GPIO, /* DGPU PWM EN */ - .gpio55 = GPIO_MODE_NONE, /* NOT USED */ - .gpio56 = GPIO_MODE_NATIVE, /* NOT USED */ - .gpio57 = GPIO_MODE_NATIVE, /* GP57_SV_DETECT */ - .gpio58 = GPIO_MODE_NATIVE, /* SML1CLK_PCH */ - .gpio59 = GPIO_MODE_NATIVE, /* USB OC 0-1 */ - .gpio60 = GPIO_MODE_GPIO, /* DDR RST CTRL */ - .gpio61 = GPIO_MODE_NATIVE, /* LPC SUSTAT */ - .gpio62 = GPIO_MODE_NATIVE, /* LPC SUSCLK */ - .gpio63 = GPIO_MODE_NATIVE, /* SLP S5*/ - -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_OUTPUT, - .gpio35 = GPIO_DIR_OUTPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_OUTPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_INPUT, - .gpio42 = GPIO_DIR_INPUT, - .gpio43 = GPIO_DIR_INPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_OUTPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_OUTPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_OUTPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_OUTPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_LOW, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_HIGH, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_LOW, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_LOW, - .gpio48 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_HIGH, - .gpio55 = GPIO_LEVEL_LOW, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_LOW, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_HIGH, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, /* CLK_FLEX0 */ - .gpio65 = GPIO_MODE_NATIVE, /* NOT USED / CLK_FLEX1 */ - .gpio66 = GPIO_MODE_GPIO, /* CLK_FLEX2 */ - .gpio67 = GPIO_MODE_GPIO, /* GPU PRSNT */ - .gpio68 = GPIO_MODE_GPIO, /* SATA PORT2 PWR EN*/ - .gpio69 = GPIO_MODE_GPIO, /* TESTMODE */ - .gpio70 = GPIO_MODE_NATIVE, /* USB3 SLOT 2DET */ - .gpio71 = GPIO_MODE_NATIVE, /* USB3 SLOT 1 DET */ - .gpio72 = GPIO_MODE_NATIVE, /* BATLOW# */ - .gpio73 = GPIO_MODE_NATIVE, /* PCIECLKRQ0#*/ - .gpio74 = GPIO_MODE_NATIVE, /* SML1ALERT# /PCHHOT# */ - .gpio75 = GPIO_MODE_NATIVE, /* SML1DATA */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - .gpio65 = GPIO_DIR_OUTPUT, - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_INPUT, - .gpio68 = GPIO_DIR_OUTPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_LOW, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_HIGH, - .gpio69 = GPIO_LEVEL_HIGH, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_HIGH, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; -#endif diff --git a/src/mainboard/intel/cougar_canyon2/hda_verb.c b/src/mainboard/intel/cougar_canyon2/hda_verb.c deleted file mode 100644 index c518b78..0000000 --- a/src/mainboard/intel/cougar_canyon2/hda_verb.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/cougar_canyon2/mainboard.c b/src/mainboard/intel/cougar_canyon2/mainboard.c deleted file mode 100644 index 0ea03d3..0000000 --- a/src/mainboard/intel/cougar_canyon2/mainboard.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/fsp_bd82x6x/pch.h> - -#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} -#endif - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/cougar_canyon2/mainboard_smi.c b/src/mainboard/intel/cougar_canyon2/mainboard_smi.c deleted file mode 100644 index 0116dc6..0000000 --- a/src/mainboard/intel/cougar_canyon2/mainboard_smi.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/fsp_bd82x6x/nvs.h> -#include <southbridge/intel/fsp_bd82x6x/pch.h> -#include <southbridge/intel/fsp_bd82x6x/me.h> -#include <northbridge/intel/fsp_sandybridge/sandybridge.h> -#include <cpu/intel/fsp_model_206ax/model_206ax.h> - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - smm_get_gnvs()->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -/* - * Change LED_POWER# (SIO GPIO 45) state based on sleep type. - * The IO address is hardcoded as we don't have device path in SMM. - */ -#define SIO_GPIO_BASE_SET4 (0x730 + 3) -#define SIO_GPIO_BLINK_GPIO45 0x25 -void mainboard_smi_sleep(u8 slp_typ) -{ - u8 reg8; - - switch (slp_typ) { - case SLP_TYP_S3: - case SLP_TYP_S4: - break; - - case SLP_TYP_S5: - /* Turn off LED */ - reg8 = inb(SIO_GPIO_BASE_SET4); - reg8 |= (1 << 5); - outb(reg8, SIO_GPIO_BASE_SET4); - break; - } -} - -#define APMC_FINALIZE 0xcb - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APMC_FINALIZE: - if (mainboard_finalized) { - printk(BIOS_DEBUG, "SMI#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/intel/cougar_canyon2/romstage.c b/src/mainboard/intel/cougar_canyon2/romstage.c deleted file mode 100644 index cc956a7..0000000 --- a/src/mainboard/intel/cougar_canyon2/romstage.c +++ /dev/null @@ -1,360 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <cbmem.h> -#include <console/console.h> -#include <reset.h> -#include "superio/smsc/sio1007/chip.h" -#include <fsp_util.h> -#include "northbridge/intel/fsp_sandybridge/northbridge.h" -#include "northbridge/intel/fsp_sandybridge/raminit.h" -#include "southbridge/intel/fsp_bd82x6x/pch.h" -#include "southbridge/intel/fsp_bd82x6x/gpio.h" -#include "southbridge/intel/fsp_bd82x6x/me.h" -#include <arch/cpu.h> -#include <cpu/x86/msr.h> -#include "gpio.h" -#include <arch/stages.h> - -#define SIO_PORT 0x164e - -static inline void reset_system(void) -{ - hard_reset(); - while (1) { - hlt(); - } -} - -static void pch_enable_lpc(void) -{ - device_t dev = PCH_LPC_DEV; - - /* Set COM1/COM2 decode range */ - pci_write_config16(dev, LPC_IO_DEC, 0x0010); - - /* Enable SuperIO + PS/2 Keyboard/Mouse */ - u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; - pci_write_config16(dev, LPC_EN, lpc_config); - - /* Map 256 bytes at 0x1600 to the LPC bus. */ - pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); - - /* Map a range for the runtime registers to the LPC bus. */ - pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); - - if (sio1007_enable_uart_at(SIO_PORT)) { - pci_write_config16(dev, LPC_EN, - lpc_config | COMA_LPC_EN); - } -} - -static void setup_sio_gpios(void) -{ - const u16 port = SIO_PORT; - const u16 runtime_port = 0x180; - - /* Turn on configuration mode. */ - outb(0x55, port); - - /* Set the GPIO direction, polarity, and type. */ - sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); - sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); - sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); - - /* Set the base address for the runtime register block. */ - sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); - sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); - - /* Turn on address decoding for it. */ - sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); - - /* - * Enable the RS232 transiver. - * Set the value of GPIO 10 by changing GP1, bit 0. - */ - u8 byte; - byte = inb(runtime_port + 0xc); - byte |= (1 << 0); - outb(byte, runtime_port + 0xc); - - /* Turn off address decoding for it. */ - sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); - - /* Turn off configuration mode. */ - outb(0xaa, port); -} - -static void rcba_config(void) -{ - u32 reg32; - - /* - * GFX INTA -> PIRQA (MSI) - * D31IP_SIP SATA INTB -> PIRQD - * D31IP_SMIP SMBUS INTC -> PIRQC - * D31IP_SIP SATA2 INTB -> PIRQD - * D31IP_TTIP THRT INTC -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D28IP_P1IP INTA -> PIRQD - * D28IP_P2IP INTB -> PIRQC - * D28IP_P3IP INTC -> PIRQB - * D28IP_P4IP INTD -> PIRQA - * D28IP_P5IP INTA -> PIRQD - * D28IP_P6IP INTB -> PIRQC - * D28IP_P7IP INTC -> PIRQB - * D28IP_P8IP INTD -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQD - * D20IP_XHCI XHCI INTA -> PIRQD (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (INTB << D31IP_SIP2) | - (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTD << D28IP_P8IP) | (INTC << D28IP_P7IP) | - (INTB << D28IP_P6IP) | (INTA << D28IP_P5IP) | - (INTD << D28IP_P4IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P2IP) | (INTA << D28IP_P1IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (INTA << D25IP_LIP); - RCBA32(D22IP) = (INTB << D22IP_KTIP) | (INTC << D22IP_IDERIP) | - (INTB << D22IP_MEI2IP) | (INTA << D22IP_MEI1IP); - RCBA32(D20IP) = (INTA << D20IP_XHCIIP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); - DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); - DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D26IR, PIRQF, PIRQA, PIRQC, PIRQD); - DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); - DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_ALWAYS; - RCBA32(FD) = reg32; -} - -void main(FSP_INFO_HEADER *fsp_info_header) -{ -#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) - int boot_mode = 0; -#endif - u32 pm1_cnt; - u16 pm1_sts; - - post_code(0x40); - -#if CONFIG_COLLECT_TIMESTAMPS - tsc_t start_romstage_time; - tsc_t before_initram_time; - - start_romstage_time = rdtsc(); - - /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ - pci_write_config32(PCI_DEV(0, 27, 0), 0x2c, start_romstage_time.lo >> 4 | - start_romstage_time.lo << 28); -#endif - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&gpio_map); - setup_sio_gpios(); - - console_init(); - post_code(0x41); - - post_code(0x42); - sandybridge_sb_early_initialization(); - - post_code(0x43); - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - post_code(0x44); - /* Wait for ME to be ready */ - intel_early_me_status(); - intel_early_me_init(); - intel_early_me_uma_size(); - - post_code(0x45); - /* Check PM1_STS[15] to see if we are waking from Sx */ - pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); - - /* Read PM1_CNT[12:10] to determine which Sx state */ - pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); - post_code(0x46); - if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); -#else - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); -#endif - } - - post_code(0x48); - -#if CONFIG_COLLECT_TIMESTAMPS - before_initram_time= rdtsc(); - /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ - pci_write_config32(PCI_DEV(0, 27, 0), 0x14, before_initram_time.lo >> 4 | - before_initram_time.lo << 28); - -#endif - - /* - * Call early init to initialize memory and chipset. This function returns - * to the romstage_main_continue function with a pointer to the HOB - * structure. - */ - printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); - fsp_early_init(fsp_info_header); - die("Uh Oh! fsp_early_init should not return here.\n"); -} - -/******************************************************************************* - * The FSP early_init function returns to this function. - * Memory is setup and the stack is set by the FSP. - ******************************************************************************/ -void romstage_main_continue(EFI_STATUS status, VOID *HobListPtr) { - int cbmem_was_initted; - u32 reg32; - void *cbmem_hob_ptr; - -#if CONFIG_COLLECT_TIMESTAMPS - tsc_t start_romstage_time; - tsc_t base_time; - tsc_t before_initram_time; - tsc_t after_initram_time = rdtsc(); - u32 timebase = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0); - u32 time_romstage_start = pci_read_config32(PCI_DEV(0, 27, 0), 0x2c); - u32 time_before_initram = pci_read_config32(PCI_DEV(0, 27, 0), 0x14); - - base_time.lo = timebase << 4; - base_time.hi = timebase >> 28; - start_romstage_time.lo = time_romstage_start << 4; - start_romstage_time.hi = time_romstage_start >> 28; - before_initram_time.lo = time_before_initram << 4; - before_initram_time.hi = time_before_initram >> 28; -#endif - - /* - * HD AUDIO is not used on this system, so we're using some registers - * in there as temporary registers to save TSC values. This is complete - * now, so disable the audio block. - */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_HD_AUDIO; - RCBA32(FD) = reg32; - - post_code(0x49); - -#if CONFIG_USBDEBUG - /* FSP reconfigures USB, so reinit it to have debug */ - early_usbdebug_init(); -#endif - - /* For reference print FSP version */ - u32 version = MCHBAR32(0x5034); - printk(BIOS_DEBUG, "FSP Version %d.%d.%d Build %d\n", - version >> 24 , (version >> 16) & 0xff, - (version >> 8) & 0xff, version & 0xff); - printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); - - intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); - - printk(BIOS_SPEW, "FD & FD2 Settings:\n"); - display_fd_settings(); - - report_memory_config(); - - post_code(0x4b); - - early_pch_init(); - post_code(0x4c); - - rcba_config(); - post_code(0x4d); - - quick_ram_check(); - post_code(0x4e); - - cbmem_was_initted = !cbmem_recovery(0); - - if(cbmem_was_initted) { - reset_system(); - } - - /* Save the HOB pointer in CBMEM to be used in ramstage. */ - cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*HobListPtr)); - *(u32*)cbmem_hob_ptr = (u32)HobListPtr; - post_code(0x4f); - -#if CONFIG_COLLECT_TIMESTAMPS - timestamp_init(base_time); - timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); - timestamp_add(TS_BEFORE_INITRAM, before_initram_time ); - timestamp_add(TS_AFTER_INITRAM, after_initram_time); - timestamp_add_now(TS_END_ROMSTAGE); -#endif -#if CONFIG_CONSOLE_CBMEM - /* Keep this the last thing this function does. */ - cbmemc_reinit(); -#endif - - /* Load the ramstage. */ - copy_and_run(); - while (1); -} - -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - /* No overrides needed */ - return; -} diff --git a/src/mainboard/intel/cougar_canyon2/thermal.h b/src/mainboard/intel/cougar_canyon2/thermal.h deleted file mode 100644 index dd08bef..0000000 --- a/src/mainboard/intel/cougar_canyon2/thermal.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_THERMAL_H -#define MAINBOARD_THERMAL_H - -/* Fan is OFF */ -#define FAN4_THRESHOLD_OFF 0 -#define FAN4_THRESHOLD_ON 0 -#define FAN4_PWM 0x00 - -/* Fan is at LOW speed */ -#define FAN3_THRESHOLD_OFF 48 -#define FAN3_THRESHOLD_ON 55 -#define FAN3_PWM 0x40 - -/* Fan is at MEDIUM speed */ -#define FAN2_THRESHOLD_OFF 52 -#define FAN2_THRESHOLD_ON 64 -#define FAN2_PWM 0x80 - -/* Fan is at HIGH speed */ -#define FAN1_THRESHOLD_OFF 60 -#define FAN1_THRESHOLD_ON 68 -#define FAN1_PWM 0xb0 - -/* Fan is at FULL speed */ -#define FAN0_THRESHOLD_OFF 66 -#define FAN0_THRESHOLD_ON 78 -#define FAN0_PWM 0xff - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 105 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 91 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/mainboard/intel/cougar_canyon_2/Kconfig b/src/mainboard/intel/cougar_canyon_2/Kconfig new file mode 100644 index 0000000..5221d8f --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/Kconfig @@ -0,0 +1,68 @@ +if BOARD_INTEL_COUGAR_CANYON_2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_FSP_IVYBRIDGE + select SOUTHBRIDGE_INTEL_FSP_BD82X6X + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select MMCONF_SUPPORT + select SUPERIO_SMSC_SIO1007 + select ENABLE_VMX + select EARLY_CBMEM_INIT + select BROKEN_CAR_MIGRATE + select INTEL_INT15 + select VGA + +config MAINBOARD_DIR + string + default intel/cougar_canyon_2 + +config MAINBOARD_PART_NUMBER + string + default "Cougar Canyon 2" + +config MMCONF_BASE_ADDRESS + hex + default 0xf8000000 # set to match FSP + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config SMBIOS_SYSTEM_ENCLOSURE_TYPE + hex + default 0x09 # This is a mobile platform + +config UDELAY_LAPIC_FIXED_FSB + int + default 100 + +config VIRTUAL_ROM_SIZE + hex + default 0x1000000 + +if HAVE_FSP_BIN + +config VGA_BIOS + bool + default y + +config VGA_BIOS_FILE + string + default "../intel/mainboard/intel/cougar_canyon_2/vbios/snm_2170.dat" + +config VGA_BIOS_ID + string + default "8086,0166" + + +endif # HAVE_FSP_BIN + +endif # BOARD_INTEL_COUGAR_CANYON_2 diff --git a/src/mainboard/intel/cougar_canyon_2/acpi/ec.asl b/src/mainboard/intel/cougar_canyon_2/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/cougar_canyon_2/acpi/hostbridge_pci_irqs.asl b/src/mainboard/intel/cougar_canyon_2/acpi/hostbridge_pci_irqs.asl new file mode 100644 index 0000000..3595e33 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/acpi/hostbridge_pci_irqs.asl @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 19 }, + + // Network 0:19.0 + Package() { 0x0019ffff, 0, 0, 20 }, + + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 }, + + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + + /* MEI */ + Package() { 0x0016ffff, 0, 0, 16 }, + Package() { 0x0016ffff, 1, 0, 17 }, + + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 23 }, + + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 16 }, + Package() { 0x001fffff, 1, 0, 19 }, + Package() { 0x001fffff, 2, 0, 18 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + + // EHCI #2 0:19.0 + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + + /* Management Engine Interface */ + Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, + + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/cougar_canyon_2/acpi/mainboard.asl b/src/mainboard/intel/cougar_canyon_2/acpi/mainboard.asl new file mode 100644 index 0000000..6b15331 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x05}) +} diff --git a/src/mainboard/intel/cougar_canyon_2/acpi/platform.asl b/src/mainboard/intel/cougar_canyon_2/acpi/platform.asl new file mode 100644 index 0000000..136cc3c --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/acpi/platform.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // NVS has a flag to determine USB policy in S3 + if (S3U0) { + Store (One, GP47) // Enable USB0 + } Else { + Store (Zero, GP47) // Disable USB0 + } + + // NVS has a flag to determine USB policy in S3 + if (S3U1) { + Store (One, GP56) // Enable USB1 + } Else { + Store (Zero, GP56) // Disable USB1 + } +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/intel/cougar_canyon_2/acpi/superio.asl b/src/mainboard/intel/cougar_canyon_2/acpi/superio.asl new file mode 100644 index 0000000..81fb948 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/acpi/superio.asl @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Values should match those defined in devicetree.cb */ + +#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller +#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR + +#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard +#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse +#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 +#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller +#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 +#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 +#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO +#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 +#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 + +#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/cougar_canyon_2/acpi_tables.c b/src/mainboard/intel/cougar_canyon_2/acpi_tables.c new file mode 100644 index 0000000..dca35b5 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/acpi_tables.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +#include "southbridge/intel/fsp_bd82x6x/nvs.h" +#include "thermal.h" + +static global_nvs_t *gnvs_; + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; + gnvs->flvl = 5; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + gnvs_ = gnvs; + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* + * Enable Front USB ports in S5 by default + * to be consistent with back port behavior + */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + acpi_update_thermal_table(gnvs); + +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/intel/cougar_canyon_2/board_info.txt b/src/mainboard/intel/cougar_canyon_2/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/intel/cougar_canyon_2/cmos.layout b/src/mainboard/intel/cougar_canyon_2/cmos.layout new file mode 100644 index 0000000..2dfa156 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/cmos.layout @@ -0,0 +1,140 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +411 1 e 8 sata_mode +#412 4 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 AHCI +8 1 Compatible +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/cougar_canyon_2/devicetree.cb b/src/mainboard/intel/cougar_canyon_2/devicetree.cb new file mode 100644 index 0000000..c499a56 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/devicetree.cb @@ -0,0 +1,73 @@ +chip northbridge/intel/fsp_sandybridge + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/fsp_model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/fsp_bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + register "sata_port_map" = "0x3f" + + device pci 14.0 on end # XHCI + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 on end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 off end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 + device pci 1c.4 on end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7 + device pci 1c.7 on end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + # TODO: insert SIO UART and WDT + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/intel/cougar_canyon_2/dsdt.asl b/src/mainboard/intel/cougar_canyon_2/dsdt.asl new file mode 100644 index 0000000..cedb8a8 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/dsdt.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/fsp_model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/fsp_bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/cougar_canyon_2/fadt.c b/src/mainboard/intel/cougar_canyon_2/fadt.c new file mode 100644 index 0000000..5191674 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/fadt.c @@ -0,0 +1,171 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = ACPI_FADT_REV_ACPI_3_0; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + fadt->model = 0x00; /* reserved, should be 0 ACPI 3.0 */ + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x00; + fadt->pstate_cnt = 0x00; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; /* 32 bits */ + fadt->pm1_cnt_len = 2; /* 32 bit register, 16 bits used */ + fadt->pm2_cnt_len = 1; /* 8 bits */ + fadt->pm_tmr_len = 4; /* 32 bits */ + fadt->gpe0_blk_len = 16; /* 128 bits */ + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0x00; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ + fadt->duty_offset = 1; + fadt->duty_width = 0; /* not supported */ + fadt->day_alrm = 0x0D; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->reset_reg.addrl = 0xCF9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->res3 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res4 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + fadt->res5 = 0x00; /* reserved, MUST be 0 ACPI 3.0 */ + + fadt->x_firmware_ctl_l = 0x00; /* set to 0 if firmware_ctrl is used */ + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + /* PM1 Status & PM1 Enable */ + fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0; + + fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.access_size = 0; + fadt->x_pm1b_evt_blk.addrl = 0; + fadt->x_pm1b_evt_blk.addrh = 0; + + /* PM1 Control Registers */ + fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x04; + fadt->x_pm1a_cnt_blk.addrh = 0; + + fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.access_size = 0; + fadt->x_pm1b_cnt_blk.addrl = 0; + fadt->x_pm1b_cnt_blk.addrh = 0; + + /* PM2 Control Registers */ + fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0; + + /* PM1 Timer Register */ + fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x08; + fadt->x_pm_tmr_blk.addrh = 0; + + /* General-Purpose Event Registers */ + fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe0_blk.bit_width = 128; /* EventStatus + EventEnable */ + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0; + + fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.access_size = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0; + + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/intel/cougar_canyon_2/gpio.h b/src/mainboard/intel/cougar_canyon_2/gpio.h new file mode 100644 index 0000000..f8f16ca --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/gpio.h @@ -0,0 +1,308 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include "southbridge/intel/fsp_bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, /* SINAI */ + .gpio1 = GPIO_MODE_GPIO, /* SMC_SMI */ + .gpio2 = GPIO_MODE_GPIO, /* PIRQE# */ + .gpio3 = GPIO_MODE_GPIO, /* PIRQF# */ + .gpio4 = GPIO_MODE_GPIO, /* PIRQG# */ + .gpio5 = GPIO_MODE_GPIO, /* PIRQH# */ + .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR*/ + .gpio7 = GPIO_MODE_GPIO, /* SMC_SCI# */ + .gpio8 = GPIO_MODE_NONE, /* NOT USED */ + .gpio9 = GPIO_MODE_NATIVE, /* USB OC10-11*/ + .gpio10 = GPIO_MODE_NATIVE, /* USB OC12-13 */ + .gpio11 = GPIO_MODE_GPIO, /* SMB_ALERT*/ + .gpio12 = GPIO_MODE_NATIVE, /* LAN DISABLE */ + .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST */ + .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE */ + .gpio15 = GPIO_MODE_GPIO, /* HOST ALERT */ + .gpio16 = GPIO_MODE_NATIVE, /* SATA4GP */ + .gpio17 = GPIO_MODE_GPIO, /* DGPU POWEROK */ + .gpio18 = GPIO_MODE_NATIVE, /* PCIECLKRQ1# */ + .gpio19 = GPIO_MODE_NATIVE, /* BBS0 */ + .gpio20 = GPIO_MODE_NATIVE, /* CIECLKRQ2# */ + .gpio21 = GPIO_MODE_NATIVE, /* SATA0GP */ + .gpio22 = GPIO_MODE_GPIO, /* BIOS Recovery */ + .gpio23 = GPIO_MODE_NATIVE, /* LDRQ1 */ + .gpio24 = GPIO_MODE_NONE, /* HOST ALERT */ + .gpio25 = GPIO_MODE_NATIVE, /* PCIECLKRQ3# */ + .gpio26 = GPIO_MODE_NATIVE, /* PCIECLKRQ4# */ + .gpio27 = GPIO_MODE_GPIO, /* SATA0 PWR EN */ + .gpio28 = GPIO_MODE_GPIO, /* PLL ODVR */ + .gpio29 = GPIO_MODE_GPIO, /* SLP_LAN# */ + .gpio30 = GPIO_MODE_NATIVE, /* SUS_WARN# */ + .gpio31 = GPIO_MODE_NATIVE, /* ACPRESENT */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_INPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_OUTPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_HIGH, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_LOW, + .gpio5 = GPIO_LEVEL_LOW, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_LOW, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_LOW, + .gpio17 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio3 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio14 = GPIO_INVERT, + .gpio15 = GPIO_INVERT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, /* SIO CLKREQ */ + .gpio33 = GPIO_MODE_NATIVE, /* DOCK ENABLE*/ + .gpio34 = GPIO_MODE_GPIO, /* STP PCI LED */ + .gpio35 = GPIO_MODE_NATIVE, /* SATA POWER EN */ + .gpio36 = GPIO_MODE_NATIVE, /* SATA2 PRESENT DET */ + .gpio37 = GPIO_MODE_NONE, /* NOT USED */ + .gpio38 = GPIO_MODE_GPIO, /* MFG MODE */ + .gpio39 = GPIO_MODE_GPIO, /* GP39 GFX CRB DET */ + .gpio40 = GPIO_MODE_NATIVE, /* USB OC 2-3 */ + .gpio41 = GPIO_MODE_NATIVE, /* USB OC 4-5 */ + .gpio42 = GPIO_MODE_NATIVE, /* USB OC 6-7 */ + .gpio43 = GPIO_MODE_NATIVE, /* USB OC 8-9 */ + .gpio44 = GPIO_MODE_NATIVE, /* PCI SLOT5 CLKREQ5 */ + .gpio45 = GPIO_MODE_NATIVE, /* LAN CLKREQ6 */ + .gpio46 = GPIO_MODE_GPIO, /* PCI SLOT5 CLKREQ5 */ + .gpio47 = GPIO_MODE_NATIVE, /* PEG CLKREQ7 */ + .gpio48 = GPIO_MODE_GPIO, /* SV_ADVANCE_GP48 */ + .gpio49 = GPIO_MODE_GPIO, /* CRIT_TEMP */ + .gpio50 = GPIO_MODE_GPIO, /* DGPU RESET */ + .gpio51 = GPIO_MODE_NONE, /* NOT USED */ + .gpio52 = GPIO_MODE_GPIO, /* DGPU SEL */ + .gpio53 = GPIO_MODE_GPIO, /* DGPU PWM SEL */ + .gpio54 = GPIO_MODE_GPIO, /* DGPU PWM EN */ + .gpio55 = GPIO_MODE_NONE, /* NOT USED */ + .gpio56 = GPIO_MODE_NATIVE, /* NOT USED */ + .gpio57 = GPIO_MODE_NATIVE, /* GP57_SV_DETECT */ + .gpio58 = GPIO_MODE_NATIVE, /* SML1CLK_PCH */ + .gpio59 = GPIO_MODE_NATIVE, /* USB OC 0-1 */ + .gpio60 = GPIO_MODE_GPIO, /* DDR RST CTRL */ + .gpio61 = GPIO_MODE_NATIVE, /* LPC SUSTAT */ + .gpio62 = GPIO_MODE_NATIVE, /* LPC SUSCLK */ + .gpio63 = GPIO_MODE_NATIVE, /* SLP S5*/ + +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_OUTPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_OUTPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_OUTPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_LOW, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_LOW, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_HIGH, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, /* CLK_FLEX0 */ + .gpio65 = GPIO_MODE_NATIVE, /* NOT USED / CLK_FLEX1 */ + .gpio66 = GPIO_MODE_GPIO, /* CLK_FLEX2 */ + .gpio67 = GPIO_MODE_GPIO, /* GPU PRSNT */ + .gpio68 = GPIO_MODE_GPIO, /* SATA PORT2 PWR EN*/ + .gpio69 = GPIO_MODE_GPIO, /* TESTMODE */ + .gpio70 = GPIO_MODE_NATIVE, /* USB3 SLOT 2DET */ + .gpio71 = GPIO_MODE_NATIVE, /* USB3 SLOT 1 DET */ + .gpio72 = GPIO_MODE_NATIVE, /* BATLOW# */ + .gpio73 = GPIO_MODE_NATIVE, /* PCIECLKRQ0#*/ + .gpio74 = GPIO_MODE_NATIVE, /* SML1ALERT# /PCHHOT# */ + .gpio75 = GPIO_MODE_NATIVE, /* SML1DATA */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_HIGH, + .gpio69 = GPIO_LEVEL_HIGH, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/intel/cougar_canyon_2/hda_verb.c b/src/mainboard/intel/cougar_canyon_2/hda_verb.c new file mode 100644 index 0000000..c518b78 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/hda_verb.c @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/cougar_canyon_2/mainboard.c b/src/mainboard/intel/cougar_canyon_2/mainboard.c new file mode 100644 index 0000000..0ea03d3 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/mainboard.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/fsp_bd82x6x/pch.h> + +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} +#endif + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/cougar_canyon_2/mainboard_smi.c b/src/mainboard/intel/cougar_canyon_2/mainboard_smi.c new file mode 100644 index 0000000..0116dc6 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/mainboard_smi.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/fsp_bd82x6x/nvs.h> +#include <southbridge/intel/fsp_bd82x6x/pch.h> +#include <southbridge/intel/fsp_bd82x6x/me.h> +#include <northbridge/intel/fsp_sandybridge/sandybridge.h> +#include <cpu/intel/fsp_model_206ax/model_206ax.h> + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +/* + * Change LED_POWER# (SIO GPIO 45) state based on sleep type. + * The IO address is hardcoded as we don't have device path in SMM. + */ +#define SIO_GPIO_BASE_SET4 (0x730 + 3) +#define SIO_GPIO_BLINK_GPIO45 0x25 +void mainboard_smi_sleep(u8 slp_typ) +{ + u8 reg8; + + switch (slp_typ) { + case SLP_TYP_S3: + case SLP_TYP_S4: + break; + + case SLP_TYP_S5: + /* Turn off LED */ + reg8 = inb(SIO_GPIO_BASE_SET4); + reg8 |= (1 << 5); + outb(reg8, SIO_GPIO_BASE_SET4); + break; + } +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APMC_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/intel/cougar_canyon_2/romstage.c b/src/mainboard/intel/cougar_canyon_2/romstage.c new file mode 100644 index 0000000..cc956a7 --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/romstage.c @@ -0,0 +1,360 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <cbmem.h> +#include <console/console.h> +#include <reset.h> +#include "superio/smsc/sio1007/chip.h" +#include <fsp_util.h> +#include "northbridge/intel/fsp_sandybridge/northbridge.h" +#include "northbridge/intel/fsp_sandybridge/raminit.h" +#include "southbridge/intel/fsp_bd82x6x/pch.h" +#include "southbridge/intel/fsp_bd82x6x/gpio.h" +#include "southbridge/intel/fsp_bd82x6x/me.h" +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include "gpio.h" +#include <arch/stages.h> + +#define SIO_PORT 0x164e + +static inline void reset_system(void) +{ + hard_reset(); + while (1) { + hlt(); + } +} + +static void pch_enable_lpc(void) +{ + device_t dev = PCH_LPC_DEV; + + /* Set COM1/COM2 decode range */ + pci_write_config16(dev, LPC_IO_DEC, 0x0010); + + /* Enable SuperIO + PS/2 Keyboard/Mouse */ + u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; + pci_write_config16(dev, LPC_EN, lpc_config); + + /* Map 256 bytes at 0x1600 to the LPC bus. */ + pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); + + /* Map a range for the runtime registers to the LPC bus. */ + pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); + + if (sio1007_enable_uart_at(SIO_PORT)) { + pci_write_config16(dev, LPC_EN, + lpc_config | COMA_LPC_EN); + } +} + +static void setup_sio_gpios(void) +{ + const u16 port = SIO_PORT; + const u16 runtime_port = 0x180; + + /* Turn on configuration mode. */ + outb(0x55, port); + + /* Set the GPIO direction, polarity, and type. */ + sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); + sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); + sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); + + /* Set the base address for the runtime register block. */ + sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); + sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); + + /* Turn on address decoding for it. */ + sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); + + /* + * Enable the RS232 transiver. + * Set the value of GPIO 10 by changing GP1, bit 0. + */ + u8 byte; + byte = inb(runtime_port + 0xc); + byte |= (1 << 0); + outb(byte, runtime_port + 0xc); + + /* Turn off address decoding for it. */ + sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); + + /* Turn off configuration mode. */ + outb(0xaa, port); +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D31IP_SIP SATA INTB -> PIRQD + * D31IP_SMIP SMBUS INTC -> PIRQC + * D31IP_SIP SATA2 INTB -> PIRQD + * D31IP_TTIP THRT INTC -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D28IP_P1IP INTA -> PIRQD + * D28IP_P2IP INTB -> PIRQC + * D28IP_P3IP INTC -> PIRQB + * D28IP_P4IP INTD -> PIRQA + * D28IP_P5IP INTA -> PIRQD + * D28IP_P6IP INTB -> PIRQC + * D28IP_P7IP INTC -> PIRQB + * D28IP_P8IP INTD -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQD (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (INTB << D31IP_SIP2) | + (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTD << D28IP_P8IP) | (INTC << D28IP_P7IP) | + (INTB << D28IP_P6IP) | (INTA << D28IP_P5IP) | + (INTD << D28IP_P4IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P2IP) | (INTA << D28IP_P1IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (INTA << D25IP_LIP); + RCBA32(D22IP) = (INTB << D22IP_KTIP) | (INTC << D22IP_IDERIP) | + (INTB << D22IP_MEI2IP) | (INTA << D22IP_MEI1IP); + RCBA32(D20IP) = (INTA << D20IP_XHCIIP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); + DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); + DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D26IR, PIRQF, PIRQA, PIRQC, PIRQD); + DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); + DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + RCBA32(FD) = reg32; +} + +void main(FSP_INFO_HEADER *fsp_info_header) +{ +#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) + int boot_mode = 0; +#endif + u32 pm1_cnt; + u16 pm1_sts; + + post_code(0x40); + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t before_initram_time; + + start_romstage_time = rdtsc(); + + /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ + pci_write_config32(PCI_DEV(0, 27, 0), 0x2c, start_romstage_time.lo >> 4 | + start_romstage_time.lo << 28); +#endif + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&gpio_map); + setup_sio_gpios(); + + console_init(); + post_code(0x41); + + post_code(0x42); + sandybridge_sb_early_initialization(); + + post_code(0x43); + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + post_code(0x44); + /* Wait for ME to be ready */ + intel_early_me_status(); + intel_early_me_init(); + intel_early_me_uma_size(); + + post_code(0x45); + /* Check PM1_STS[15] to see if we are waking from Sx */ + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + + /* Read PM1_CNT[12:10] to determine which Sx state */ + pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); + post_code(0x46); + if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + post_code(0x48); + +#if CONFIG_COLLECT_TIMESTAMPS + before_initram_time= rdtsc(); + /* since this mainboard doesn't use audio, we can stuff the TSC values in there */ + pci_write_config32(PCI_DEV(0, 27, 0), 0x14, before_initram_time.lo >> 4 | + before_initram_time.lo << 28); + +#endif + + /* + * Call early init to initialize memory and chipset. This function returns + * to the romstage_main_continue function with a pointer to the HOB + * structure. + */ + printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); + fsp_early_init(fsp_info_header); + die("Uh Oh! fsp_early_init should not return here.\n"); +} + +/******************************************************************************* + * The FSP early_init function returns to this function. + * Memory is setup and the stack is set by the FSP. + ******************************************************************************/ +void romstage_main_continue(EFI_STATUS status, VOID *HobListPtr) { + int cbmem_was_initted; + u32 reg32; + void *cbmem_hob_ptr; + +#if CONFIG_COLLECT_TIMESTAMPS + tsc_t start_romstage_time; + tsc_t base_time; + tsc_t before_initram_time; + tsc_t after_initram_time = rdtsc(); + u32 timebase = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0); + u32 time_romstage_start = pci_read_config32(PCI_DEV(0, 27, 0), 0x2c); + u32 time_before_initram = pci_read_config32(PCI_DEV(0, 27, 0), 0x14); + + base_time.lo = timebase << 4; + base_time.hi = timebase >> 28; + start_romstage_time.lo = time_romstage_start << 4; + start_romstage_time.hi = time_romstage_start >> 28; + before_initram_time.lo = time_before_initram << 4; + before_initram_time.hi = time_before_initram >> 28; +#endif + + /* + * HD AUDIO is not used on this system, so we're using some registers + * in there as temporary registers to save TSC values. This is complete + * now, so disable the audio block. + */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_HD_AUDIO; + RCBA32(FD) = reg32; + + post_code(0x49); + +#if CONFIG_USBDEBUG + /* FSP reconfigures USB, so reinit it to have debug */ + early_usbdebug_init(); +#endif + + /* For reference print FSP version */ + u32 version = MCHBAR32(0x5034); + printk(BIOS_DEBUG, "FSP Version %d.%d.%d Build %d\n", + version >> 24 , (version >> 16) & 0xff, + (version >> 8) & 0xff, version & 0xff); + printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); + + intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); + + printk(BIOS_SPEW, "FD & FD2 Settings:\n"); + display_fd_settings(); + + report_memory_config(); + + post_code(0x4b); + + early_pch_init(); + post_code(0x4c); + + rcba_config(); + post_code(0x4d); + + quick_ram_check(); + post_code(0x4e); + + cbmem_was_initted = !cbmem_recovery(0); + + if(cbmem_was_initted) { + reset_system(); + } + + /* Save the HOB pointer in CBMEM to be used in ramstage. */ + cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*HobListPtr)); + *(u32*)cbmem_hob_ptr = (u32)HobListPtr; + post_code(0x4f); + +#if CONFIG_COLLECT_TIMESTAMPS + timestamp_init(base_time); + timestamp_add(TS_START_ROMSTAGE, start_romstage_time ); + timestamp_add(TS_BEFORE_INITRAM, before_initram_time ); + timestamp_add(TS_AFTER_INITRAM, after_initram_time); + timestamp_add_now(TS_END_ROMSTAGE); +#endif +#if CONFIG_CONSOLE_CBMEM + /* Keep this the last thing this function does. */ + cbmemc_reinit(); +#endif + + /* Load the ramstage. */ + copy_and_run(); + while (1); +} + +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) +{ + /* No overrides needed */ + return; +} diff --git a/src/mainboard/intel/cougar_canyon_2/thermal.h b/src/mainboard/intel/cougar_canyon_2/thermal.h new file mode 100644 index 0000000..dd08bef --- /dev/null +++ b/src/mainboard/intel/cougar_canyon_2/thermal.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_THERMAL_H +#define MAINBOARD_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 +#define FAN4_PWM 0x00 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 48 +#define FAN3_THRESHOLD_ON 55 +#define FAN3_PWM 0x40 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 52 +#define FAN2_THRESHOLD_ON 64 +#define FAN2_PWM 0x80 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 60 +#define FAN1_THRESHOLD_ON 68 +#define FAN1_PWM 0xb0 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 66 +#define FAN0_THRESHOLD_ON 78 +#define FAN0_PWM 0xff + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 105 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 91 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/intel/emerald_lake_2/Kconfig b/src/mainboard/intel/emerald_lake_2/Kconfig new file mode 100644 index 0000000..33b1db3 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/Kconfig @@ -0,0 +1,40 @@ +if BOARD_INTEL_EMERALD_LAKE_2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SOUTHBRIDGE_INTEL_C216 + select SUPERIO_SMSC_SIO1007 + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select INTEL_INT15 + #select MAINBOARD_HAS_CHROMEOS + +config MAINBOARD_DIR + string + default intel/emerald_lake_2 + +config MAINBOARD_PART_NUMBER + string + default "EMERALD LAKE 2" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +endif # BOARD_INTEL_EMERALD_LAKE_2 diff --git a/src/mainboard/intel/emerald_lake_2/Makefile.inc b/src/mainboard/intel/emerald_lake_2/Makefile.inc new file mode 100644 index 0000000..a1f72e1 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +romstage-y += chromeos.c +ramstage-y += chromeos.c diff --git a/src/mainboard/intel/emerald_lake_2/acpi/chromeos.asl b/src/mainboard/intel/emerald_lake_2/acpi/chromeos.asl new file mode 100644 index 0000000..307e2e2 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/chromeos.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(OIPG, Package() { + Package() { 0x001, 0, 22, "CougarPoint" }, // recovery button + Package() { 0x002, 1, 57, "CougarPoint" }, // developer switch + Package() { 0x003, 0, 48, "CougarPoint" }, // firmware write protect +}) diff --git a/src/mainboard/intel/emerald_lake_2/acpi/ec.asl b/src/mainboard/intel/emerald_lake_2/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/emerald_lake_2/acpi/ivybridge_pci_irqs.asl b/src/mainboard/intel/emerald_lake_2/acpi/ivybridge_pci_irqs.asl new file mode 100644 index 0000000..f679733 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/ivybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for IvyBridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/emerald_lake_2/acpi/mainboard.asl b/src/mainboard/intel/emerald_lake_2/acpi/mainboard.asl new file mode 100644 index 0000000..6b15331 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x05}) +} diff --git a/src/mainboard/intel/emerald_lake_2/acpi/platform.asl b/src/mainboard/intel/emerald_lake_2/acpi/platform.asl new file mode 100644 index 0000000..5f605f0 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/platform.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // NVS has a flag to determine USB policy in S3 + if (S3U0) { + Store (One, GP47) // Enable USB0 + } Else { + Store (Zero, GP47) // Disable USB0 + } + + // NVS has a flag to determine USB policy in S3 + if (S3U1) { + Store (One, GP56) // Enable USB1 + } Else { + Store (Zero, GP56) // Disable USB1 + } +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/intel/emerald_lake_2/acpi/sandybridge_pci_irqs.asl b/src/mainboard/intel/emerald_lake_2/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..a57f9f1 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 20 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/emerald_lake_2/acpi/superio.asl b/src/mainboard/intel/emerald_lake_2/acpi/superio.asl new file mode 100644 index 0000000..a50c4b3 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/superio.asl @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Values should match those defined in devicetree.cb */ + +#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller +#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR + +#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard +#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse +#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 +#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller +#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 +#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 +#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO +#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 +#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 + +#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/emerald_lake_2/acpi/thermal.asl b/src/mainboard/intel/emerald_lake_2/acpi/thermal.asl new file mode 100644 index 0000000..1f91ab5 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi/thermal.asl @@ -0,0 +1,273 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + // Get CPU Temperature from PECI via SuperIO TMPIN3 + Store (_SB.PCI0.LPCB.SIO.ENVC.TIN3, Local0) + + // Check for invalid readings + If (LOr (LEqual (Local0, 255), LEqual (Local0, 0))) { + Return (CTOK (\F2ON)) + } + + // PECI raw value is an offset from Tj_max + Subtract (255, Local0, Local1) + + // Handle values greater than Tj_max + If (LGreaterEqual (Local1, \TMAX)) { + Return (CTOK (\TMAX)) + } + + // Subtract from Tj_max to get temperature + Subtract (\TMAX, Local1, Local0) + Return (CTOK (Local0)) + } + + Method (_AC0) { + If (LLessEqual (\FLVL, 0)) { + Return (CTOK (\F0OF)) + } Else { + Return (CTOK (\F0ON)) + } + } + + Method (_AC1) { + If (LLessEqual (\FLVL, 1)) { + Return (CTOK (\F1OF)) + } Else { + Return (CTOK (\F1ON)) + } + } + + Method (_AC2) { + If (LLessEqual (\FLVL, 2)) { + Return (CTOK (\F2OF)) + } Else { + Return (CTOK (\F2ON)) + } + } + + Method (_AC3) { + If (LLessEqual (\FLVL, 3)) { + Return (CTOK (\F3OF)) + } Else { + Return (CTOK (\F3ON)) + } + } + + Method (_AC4) { + If (LLessEqual (\FLVL, 4)) { + Return (CTOK (\F4OF)) + } Else { + Return (CTOK (\F4ON)) + } + } + + Name (_AL0, Package () { FAN0 }) + Name (_AL1, Package () { FAN1 }) + Name (_AL2, Package () { FAN2 }) + Name (_AL3, Package () { FAN3 }) + Name (_AL4, Package () { FAN4 }) + + PowerResource (FNP0, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 0)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (0, \FLVL) + Store (\F0PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (1, \FLVL) + Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP1, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 1)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (1, \FLVL) + Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (2, \FLVL) + Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP2, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 2)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (2, \FLVL) + Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (3, \FLVL) + Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP3, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 3)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (3, \FLVL) + Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP4, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 4)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) + Notify (_TZ.THRM, 0x81) + } + } + + Device (FAN0) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 0) + Name (_PR0, Package () { FNP0 }) + } + + Device (FAN1) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 1) + Name (_PR0, Package () { FNP1 }) + } + + Device (FAN2) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 2) + Name (_PR0, Package () { FNP2 }) + } + + Device (FAN3) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 3) + Name (_PR0, Package () { FNP3 }) + } + + Device (FAN4) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 4) + Name (_PR0, Package () { FNP4 }) + } + } +} diff --git a/src/mainboard/intel/emerald_lake_2/acpi_tables.c b/src/mainboard/intel/emerald_lake_2/acpi_tables.c new file mode 100644 index 0000000..3d95586 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/acpi_tables.c @@ -0,0 +1,123 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> + +#include "southbridge/intel/bd82x6x/nvs.h" +#include "thermal.h" + +static global_nvs_t *gnvs_; + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->f4of = FAN4_THRESHOLD_OFF; + gnvs->f4on = FAN4_THRESHOLD_ON; + gnvs->f4pw = FAN4_PWM; + + gnvs->f3of = FAN3_THRESHOLD_OFF; + gnvs->f3on = FAN3_THRESHOLD_ON; + gnvs->f3pw = FAN3_PWM; + + gnvs->f2of = FAN2_THRESHOLD_OFF; + gnvs->f2on = FAN2_THRESHOLD_ON; + gnvs->f2pw = FAN2_PWM; + + gnvs->f1of = FAN1_THRESHOLD_OFF; + gnvs->f1on = FAN1_THRESHOLD_ON; + gnvs->f1pw = FAN1_PWM; + + gnvs->f0of = FAN0_THRESHOLD_OFF; + gnvs->f0on = FAN0_THRESHOLD_ON; + gnvs->f0pw = FAN0_PWM; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + gnvs_ = gnvs; + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* + * Enable Front USB ports in S5 by default + * to be consistent with back port behavior + */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + acpi_update_thermal_table(gnvs); + + // Stumpy has no arms^H^H^H^HEC. + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/intel/emerald_lake_2/board_info.txt b/src/mainboard/intel/emerald_lake_2/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/intel/emerald_lake_2/chromeos.c b/src/mainboard/intel/emerald_lake_2/chromeos.c new file mode 100644 index 0000000..0c6e862 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/chromeos.c @@ -0,0 +1,114 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <bootmode.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <southbridge/intel/bd82x6x/pch.h> + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + + if (!gpio_base) + return; + + u32 gp_lvl = inl(gpio_base + 0x0c); + u32 gp_lvl2 = inl(gpio_base + 0x38); + /* u32 gp_lvl3 = inl(gpio_base + 0x48); */ + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + /* Write Protect: GPIO48 */ + gpios->gpios[0].port = 48; + gpios->gpios[0].polarity = ACTIVE_LOW; + gpios->gpios[0].value = (gp_lvl2 >> (48-32)) & 1; + strncpy((char *)gpios->gpios[0].name,"write protect", + GPIO_MAX_NAME_LENGTH); + + /* Recovery: GPIO22 */ + gpios->gpios[1].port = 22; + gpios->gpios[1].polarity = ACTIVE_LOW; + gpios->gpios[1].value = (gp_lvl >> 22) & 1; + strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); + + /* Developer: GPIO57 */ + gpios->gpios[2].port = 57; + gpios->gpios[2].polarity = ACTIVE_LOW; + gpios->gpios[2].value = (gp_lvl2 >> (57-32)) & 1; + strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); + + /* Hard code the lid switch GPIO to open. */ + gpios->gpios[3].port = -1; + gpios->gpios[3].polarity = ACTIVE_HIGH; + gpios->gpios[3].value = 1; + strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); + + /* Power Button */ + gpios->gpios[4].port = -1; + gpios->gpios[4].polarity = ACTIVE_HIGH; + gpios->gpios[4].value = 0; + strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); + + /* Did we load the VGA option ROM? */ + gpios->gpios[5].port = -1; + gpios->gpios[5].polarity = ACTIVE_HIGH; + gpios->gpios[5].value = gfx_get_init_done(); + strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); +} +#endif + +int get_developer_mode_switch(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + u32 gp_lvl2 = inl(gpio_base + 0x38); + + /* Developer: GPIO17, active high */ + return (gp_lvl2 >> (57-32)) & 1; +} + +int get_recovery_mode_switch(void) +{ + device_t dev; +#ifdef __PRE_RAM__ + dev = PCI_DEV(0, 0x1f, 0); +#else + dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); +#endif + u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; + u32 gp_lvl = inl(gpio_base + 0x0c); + + /* Recovery: GPIO22, active low */ + return !((gp_lvl >> 22) & 1); +} diff --git a/src/mainboard/intel/emerald_lake_2/cmos.layout b/src/mainboard/intel/emerald_lake_2/cmos.layout new file mode 100644 index 0000000..711ef4d --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/cmos.layout @@ -0,0 +1,152 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +411 1 e 8 sata_mode +#412 4 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv + +# coreboot config options: northbridge +544 3 e 11 gfx_uma_size + +#547 437 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 AHCI +8 1 Compatible +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/emerald_lake_2/devicetree.cb b/src/mainboard/intel/emerald_lake_2/devicetree.cb new file mode 100644 index 0000000..0d81502 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/devicetree.cb @@ -0,0 +1,82 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "1" + register "gpi14_routing" = "2" + register "alt_gp_smi_en" = "0x0002" + register "gpe0_en" = "0x4000" + + register "sata_port_map" = "0x3f" + + # SuperIO range is 0x700-0x73f + register "gen2_dec" = "0x003c0701" + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 off end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 (WLAN) + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 (Debug) + device pci 1c.3 on end # PCIe Port #4 (LAN) + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/intel/emerald_lake_2/dsdt.asl b/src/mainboard/intel/emerald_lake_2/dsdt.asl new file mode 100644 index 0000000..cbac763 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/dsdt.asl @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include "../../../cpu/intel/model_206ax/acpi/cpu.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/emerald_lake_2/ec.c b/src/mainboard/intel/emerald_lake_2/ec.c new file mode 100644 index 0000000..9f2a944 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/ec.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <types.h> +#include <console/console.h> +#include <ec/smsc/mec1308/ec.h> +#include "ec.h" + +void lumpy_ec_init(void) +{ + printk(BIOS_DEBUG, "lumpy_ec_init\n"); + + if (acpi_is_wakeup_s3()) + return; + + /* + * Enable EC control of fan speed. + * + * This will be changed to OS control in ACPI EC _REG + * method when the OS is ready to control the fan. + */ + ec_write(EC_FAN_SPEED, 0); + + send_ec_command_data(EC_BATTERY_MODE, EC_BATTERY_MODE_NORMAL); + send_ec_command_data(EC_POWER_BUTTON_MODE, EC_POWER_BUTTON_MODE_OS); + send_ec_command(EC_SMI_DISABLE); + send_ec_command(EC_ACPI_ENABLE); + send_ec_command(EC_BACKLIGHT_ON); +} diff --git a/src/mainboard/intel/emerald_lake_2/ec.h b/src/mainboard/intel/emerald_lake_2/ec.h new file mode 100644 index 0000000..94a9a89 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/ec.h @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef LUMPY_EC_H +#define LUMPY_EC_H + +/* Commands */ +#define EC_SMI_ENABLE 0x74 +#define EC_SMI_DISABLE 0x75 +#define EC_ACPI_ENABLE 0x76 /* Enter ACPI mode */ +#define EC_ACPI_DISABLE 0x77 /* Exit ACPI mode */ + +/* Commands with data */ +#define EC_AUX_PORT_MODE 0x64 /* PS/2 control mode */ +#define EC_AUX_PORT_MODE_ENABLE 0x00 +#define EC_AUX_PORT_MODE_DISABLE 0x01 +#define EC_POWER_BUTTON_MODE 0x63 +#define EC_POWER_BUTTON_MODE_OS 0x00 /* OS control, 8 second override */ +#define EC_POWER_BUTTON_MODE_EC 0x00 /* EC control */ +#define EC_BACKLIGHT_OFF 0x67 /* Turn Backlight Off */ +#define EC_BACKLIGHT_ON 0x68 /* Turn Backlight On */ +#define EC_BATTERY_MODE 0x13 +#define EC_BATTERY_MODE_NORMAL 0x00 /* Normal mode */ +#define EC_BATTERY_MODE_EXTEND 0x01 /* Battery Life Cycle Extension */ + +/* EC RAM */ +#define EC_FAN_SPEED 0xca +#define EC_FAN_SPEED_LEVEL_0 0x01 /* Level 0 is fastest */ +#define EC_FAN_SPEED_LEVEL_1 0x02 /* Level 1 is fast */ +#define EC_FAN_SPEED_LEVEL_2 0x04 /* Level 2 is slow */ +#define EC_FAN_SPEED_LEVEL_3 0x08 /* Level 3 is slowest */ +#define EC_FAN_SPEED_LEVEL_4 0x10 /* Level 4 is off */ +#define EC_FAN_SPEED_FLAG_OS 0x80 /* OS control of fan speed */ + +extern void lumpy_ec_init(void); + +#endif // LUMPY_EC_H diff --git a/src/mainboard/intel/emerald_lake_2/fadt.c b/src/mainboard/intel/emerald_lake_2/fadt.c new file mode 100644 index 0000000..315cb58 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/fadt.c @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_DESKTOP; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/intel/emerald_lake_2/gpio.h b/src/mainboard/intel/emerald_lake_2/gpio.h new file mode 100644 index 0000000..05b9164 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/gpio.h @@ -0,0 +1,106 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef EMERALDLAKE2_GPIO_H +#define EMERALDLAKE2_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_GPIO, + .gpio12 = GPIO_MODE_GPIO, + .gpio15 = GPIO_MODE_GPIO, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio24 = GPIO_MODE_GPIO, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_INPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio36 = GPIO_MODE_GPIO, + .gpio48 = GPIO_MODE_GPIO, + .gpio57 = GPIO_MODE_GPIO, + .gpio60 = GPIO_MODE_GPIO, +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio48 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { +}; + +const struct pch_gpio_map emeraldlake2_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; + +#endif diff --git a/src/mainboard/intel/emerald_lake_2/hda_verb.c b/src/mainboard/intel/emerald_lake_2/hda_verb.c new file mode 100644 index 0000000..96770de --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/hda_verb.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 + 0x10134210, // Subsystem ID + 0x00000007, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ + AZALIA_SUBVENDOR(0x0, 0x10134210), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), + + /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ + AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), + + /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), + + /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), + + /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), + + /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), + + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/emerald_lake_2/mainboard.c b/src/mainboard/intel/emerald_lake_2/mainboard.c new file mode 100644 index 0000000..347ce8a --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/mainboard.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/emerald_lake_2/onboard.h b/src/mainboard/intel/emerald_lake_2/onboard.h new file mode 100644 index 0000000..52f53e0 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/onboard.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef LUMPY_ONBOARD_H +#define LUMPY_ONBOARD_H + +#include <arch/smp/mpspec.h> + +#define LUMPY_LIGHTSENSOR_NAME "lightsensor" +#define LUMPY_LIGHTSENSOR_I2C_ADDR 0x44 +#define LUMPY_LIGHTSENSOR_GSI 20 +#define LUMPY_LIGHTSENSOR_IRQ 14 +#define LUMPY_LIGHTSENSOR_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) + +#define LUMPY_TRACKPAD_NAME "trackpad" +#define LUMPY_TRACKPAD_I2C_ADDR 0x67 +#define LUMPY_TRACKPAD_GSI 21 +#define LUMPY_TRACKPAD_IRQ 15 +#define LUMPY_TRACKPAD_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) + +#endif diff --git a/src/mainboard/intel/emerald_lake_2/romstage.c b/src/mainboard/intel/emerald_lake_2/romstage.c new file mode 100644 index 0000000..220b1d7 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/romstage.c @@ -0,0 +1,297 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include "superio/smsc/sio1007/chip.h" +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include "gpio.h" +#if CONFIG_CHROMEOS +#include <vendorcode/google/chromeos/chromeos.h> +#endif + +#define SIO_PORT 0x164e + +static void pch_enable_lpc(void) +{ + device_t dev = PCH_LPC_DEV; + + /* Set COM1/COM2 decode range */ + pci_write_config16(dev, LPC_IO_DEC, 0x0010); + + /* Enable SuperIO + PS/2 Keyboard/Mouse */ + u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; + pci_write_config16(dev, LPC_EN, lpc_config); + + /* Map 256 bytes at 0x1600 to the LPC bus. */ + pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); + + /* Map a range for the runtime_port registers to the LPC bus. */ + pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); + + /* Enable COM1 */ + if (sio1007_enable_uart_at(SIO_PORT)) { + pci_write_config16(dev, LPC_EN, + lpc_config | COMA_LPC_EN); + } +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQE + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D30IP) = (NOINT << D30IP_PIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + RCBA32(FD) = reg32; +} + +// FIXME, this function is generic code that should go to sb/... or +// nb/../early_init.c +static void early_pch_init(void) +{ + u8 reg8; + + // reset rtc power status + reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); +} + +static void setup_sio_gpios(void) +{ + const u16 port = SIO_PORT; + const u16 runtime_port = 0x180; + + /* Turn on configuration mode. */ + outb(0x55, port); + + /* Set the GPIO direction, polarity, and type. */ + sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); + sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); + sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); + + /* Set the base address for the runtime register block. */ + sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); + sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); + + /* Turn on address decoding for it. */ + sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); + + /* Set the value of GPIO 10 by changing GP1, bit 0. */ + u8 byte; + byte = inb(runtime_port + 0xc); + byte |= (1 << 0); + outb(byte, runtime_port + 0xc); + + /* Turn off address decoding for it. */ + sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); + + /* Turn off configuration mode. */ + outb(0xaa, port); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int boot_mode = 0; + int cbmem_was_initted; + + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = DEFAULT_MCHBAR, + .dmibar = DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = CONFIG_HPET_ADDRESS, + .rcba = DEFAULT_RCBABASE, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .thermalbase = 0xfed08000, + .system_type = 0, // 0 Mobile, 1 Desktop/Server + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, + .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, + .ec_present = 0, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb_port_config = { + { 1, 0, 0x0040 }, /* P0: Front port (OC0) */ + { 1, 1, 0x0040 }, /* P1: Back port (OC1) */ + { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */ + { 1, 0, 0x0040 }, /* P3: MMC (no OC) */ + { 1, 2, 0x0040 }, /* P4: Front port (OC2) */ + { 0, 0, 0x0000 }, /* P5: Empty */ + { 0, 0, 0x0000 }, /* P6: Empty */ + { 0, 0, 0x0000 }, /* P7: Empty */ + { 1, 4, 0x0040 }, /* P8: Back port (OC4) */ + { 1, 4, 0x0040 }, /* P9: MINIPCIE3 (no OC) */ + { 1, 4, 0x0040 }, /* P10: BLUETOOTH (no OC) */ + { 0, 4, 0x0000 }, /* P11: Empty */ + { 1, 6, 0x0040 }, /* P12: Back port (OC6) */ + { 1, 5, 0x0040 }, /* P13: Back port (OC5) */ + }, + }; + + timestamp_init(get_initial_timestamp()); + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&emeraldlake2_gpio_map); + setup_sio_gpios(); + + /* Early SuperIO setup */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected\n"); + boot_mode = 1; + + /* System is not happy after keyboard reset... */ + printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); + outb(0x6, 0xcf9); + hlt(); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + boot_mode = southbridge_detect_s3_resume() ? 2 : 0; + + post_code(0x38); + /* Enable SPD ROMs and DDR-III DRAM */ + enable_smbus(); + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == 2) + enable_usb_bar(); + + post_code(0x3a); + pei_data.boot_mode = boot_mode; + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(&pei_data); + + timestamp_add_now(TS_AFTER_INITRAM); + post_code(0x3b); + /* Perform some initialization that must run before stage2 */ + early_pch_init(); + post_code(0x3c); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + post_code(0x3d); + + quick_ram_check(); + post_code(0x3e); + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + if (boot_mode!=2) + save_mrc_data(&pei_data); + + if (boot_mode==2 && !cbmem_was_initted) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + hlt(); + } + northbridge_romstage_finalize(boot_mode==2); + + post_code(0x3f); +#if CONFIG_CHROMEOS + init_chromeos(boot_mode); +#endif + timestamp_add_now(TS_END_ROMSTAGE); +} diff --git a/src/mainboard/intel/emerald_lake_2/smihandler.c b/src/mainboard/intel/emerald_lake_2/smihandler.c new file mode 100644 index 0000000..ba76eb8 --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/smihandler.c @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +/* + * Change LED_POWER# (SIO GPIO 45) state based on sleep type. + * The IO address is hardcoded as we don't have device path in SMM. + */ +#define SIO_GPIO_BASE_SET4 (0x730 + 3) +#define SIO_GPIO_BLINK_GPIO45 0x25 +void mainboard_smi_sleep(u8 slp_typ) +{ + u8 reg8; + + switch (slp_typ) { + case 3: + case 4: + break; + + case 5: + /* Turn off LED */ + reg8 = inb(SIO_GPIO_BASE_SET4); + reg8 |= (1 << 5); + outb(reg8, SIO_GPIO_BASE_SET4); + break; + } +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APMC_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/intel/emerald_lake_2/thermal.h b/src/mainboard/intel/emerald_lake_2/thermal.h new file mode 100644 index 0000000..883849d --- /dev/null +++ b/src/mainboard/intel/emerald_lake_2/thermal.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef EMERALDLAKE2_THERMAL_H +#define EMERALDLAKE2_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 +#define FAN4_PWM 0x00 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 48 +#define FAN3_THRESHOLD_ON 55 +#define FAN3_PWM 0x40 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 52 +#define FAN2_THRESHOLD_ON 64 +#define FAN2_PWM 0x80 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 60 +#define FAN1_THRESHOLD_ON 68 +#define FAN1_PWM 0xb0 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 66 +#define FAN0_THRESHOLD_ON 78 +#define FAN0_PWM 0xff + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/intel/emeraldlake2/Kconfig b/src/mainboard/intel/emeraldlake2/Kconfig deleted file mode 100644 index dc04631..0000000 --- a/src/mainboard/intel/emeraldlake2/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -if BOARD_INTEL_EMERALDLAKE2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_IVYBRIDGE - select SOUTHBRIDGE_INTEL_C216 - select SUPERIO_SMSC_SIO1007 - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_ACPI_RESUME - select INTEL_INT15 - #select MAINBOARD_HAS_CHROMEOS - -config MAINBOARD_DIR - string - default intel/emeraldlake2 - -config MAINBOARD_PART_NUMBER - string - default "EMERALD LAKE 2" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config VGA_BIOS_FILE - string - default "pci8086,0166.rom" - -endif # BOARD_INTEL_EMERALDLAKE2 diff --git a/src/mainboard/intel/emeraldlake2/Makefile.inc b/src/mainboard/intel/emeraldlake2/Makefile.inc deleted file mode 100644 index a1f72e1..0000000 --- a/src/mainboard/intel/emeraldlake2/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -romstage-y += chromeos.c -ramstage-y += chromeos.c diff --git a/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl b/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl deleted file mode 100644 index 307e2e2..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/chromeos.asl +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Name(OIPG, Package() { - Package() { 0x001, 0, 22, "CougarPoint" }, // recovery button - Package() { 0x002, 1, 57, "CougarPoint" }, // developer switch - Package() { 0x003, 0, 48, "CougarPoint" }, // firmware write protect -}) diff --git a/src/mainboard/intel/emeraldlake2/acpi/ec.asl b/src/mainboard/intel/emeraldlake2/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/emeraldlake2/acpi/ivybridge_pci_irqs.asl b/src/mainboard/intel/emeraldlake2/acpi/ivybridge_pci_irqs.asl deleted file mode 100644 index f679733..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/ivybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for IvyBridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 20 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/emeraldlake2/acpi/mainboard.asl b/src/mainboard/intel/emeraldlake2/acpi/mainboard.asl deleted file mode 100644 index 6b15331..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake - Name(_PRW, Package(){0x1d, 0x05}) -} diff --git a/src/mainboard/intel/emeraldlake2/acpi/platform.asl b/src/mainboard/intel/emeraldlake2/acpi/platform.asl deleted file mode 100644 index 5f605f0..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/platform.asl +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // NVS has a flag to determine USB policy in S3 - if (S3U0) { - Store (One, GP47) // Enable USB0 - } Else { - Store (Zero, GP47) // Disable USB0 - } - - // NVS has a flag to determine USB policy in S3 - if (S3U1) { - Store (One, GP56) // Enable USB1 - } Else { - Store (Zero, GP56) // Disable USB1 - } -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl b/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index a57f9f1..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 20 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/emeraldlake2/acpi/superio.asl b/src/mainboard/intel/emeraldlake2/acpi/superio.asl deleted file mode 100644 index a50c4b3..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Values should match those defined in devicetree.cb */ - -#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller -#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR - -#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard -#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse -#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 -#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller -#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 -#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 -#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO -#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 -#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 - -#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/emeraldlake2/acpi/thermal.asl b/src/mainboard/intel/emeraldlake2/acpi/thermal.asl deleted file mode 100644 index 1f91ab5..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi/thermal.asl +++ /dev/null @@ -1,273 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - Name (_TC1, 0x02) - Name (_TC2, 0x05) - - // Thermal zone polling frequency: 10 seconds - Name (_TZP, 100) - - // Thermal sampling period for passive cooling: 2 seconds - Name (_TSP, 20) - - // Convert from Degrees C to 1/10 Kelvin for ACPI - Method (CTOK, 1) { - // 10th of Degrees C - Multiply (Arg0, 10, Local0) - - // Convert to Kelvin - Add (Local0, 2732, Local0) - - Return (Local0) - } - - // Threshold for OS to shutdown - Method (_CRT, 0, Serialized) - { - Return (CTOK (\TCRT)) - } - - // Threshold for passive cooling - Method (_PSV, 0, Serialized) - { - Return (CTOK (\TPSV)) - } - - // Processors used for passive cooling - Method (_PSL, 0, Serialized) - { - Return (\PPKG ()) - } - - Method (_TMP, 0, Serialized) - { - // Get CPU Temperature from PECI via SuperIO TMPIN3 - Store (_SB.PCI0.LPCB.SIO.ENVC.TIN3, Local0) - - // Check for invalid readings - If (LOr (LEqual (Local0, 255), LEqual (Local0, 0))) { - Return (CTOK (\F2ON)) - } - - // PECI raw value is an offset from Tj_max - Subtract (255, Local0, Local1) - - // Handle values greater than Tj_max - If (LGreaterEqual (Local1, \TMAX)) { - Return (CTOK (\TMAX)) - } - - // Subtract from Tj_max to get temperature - Subtract (\TMAX, Local1, Local0) - Return (CTOK (Local0)) - } - - Method (_AC0) { - If (LLessEqual (\FLVL, 0)) { - Return (CTOK (\F0OF)) - } Else { - Return (CTOK (\F0ON)) - } - } - - Method (_AC1) { - If (LLessEqual (\FLVL, 1)) { - Return (CTOK (\F1OF)) - } Else { - Return (CTOK (\F1ON)) - } - } - - Method (_AC2) { - If (LLessEqual (\FLVL, 2)) { - Return (CTOK (\F2OF)) - } Else { - Return (CTOK (\F2ON)) - } - } - - Method (_AC3) { - If (LLessEqual (\FLVL, 3)) { - Return (CTOK (\F3OF)) - } Else { - Return (CTOK (\F3ON)) - } - } - - Method (_AC4) { - If (LLessEqual (\FLVL, 4)) { - Return (CTOK (\F4OF)) - } Else { - Return (CTOK (\F4ON)) - } - } - - Name (_AL0, Package () { FAN0 }) - Name (_AL1, Package () { FAN1 }) - Name (_AL2, Package () { FAN2 }) - Name (_AL3, Package () { FAN3 }) - Name (_AL4, Package () { FAN4 }) - - PowerResource (FNP0, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 0)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (0, \FLVL) - Store (\F0PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (1, \FLVL) - Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP1, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 1)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (1, \FLVL) - Store (\F1PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (2, \FLVL) - Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP2, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 2)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (2, \FLVL) - Store (\F2PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (3, \FLVL) - Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP3, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 3)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (3, \FLVL) - Store (\F3PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP4, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 4)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Store (\F4PW, _SB.PCI0.LPCB.SIO.ENVC.F3PS) - Notify (_TZ.THRM, 0x81) - } - } - - Device (FAN0) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 0) - Name (_PR0, Package () { FNP0 }) - } - - Device (FAN1) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 1) - Name (_PR0, Package () { FNP1 }) - } - - Device (FAN2) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 2) - Name (_PR0, Package () { FNP2 }) - } - - Device (FAN3) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 3) - Name (_PR0, Package () { FNP3 }) - } - - Device (FAN4) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 4) - Name (_PR0, Package () { FNP4 }) - } - } -} diff --git a/src/mainboard/intel/emeraldlake2/acpi_tables.c b/src/mainboard/intel/emeraldlake2/acpi_tables.c deleted file mode 100644 index 3d95586..0000000 --- a/src/mainboard/intel/emeraldlake2/acpi_tables.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <vendorcode/google/chromeos/gnvs.h> - -#include "southbridge/intel/bd82x6x/nvs.h" -#include "thermal.h" - -static global_nvs_t *gnvs_; - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->f4of = FAN4_THRESHOLD_OFF; - gnvs->f4on = FAN4_THRESHOLD_ON; - gnvs->f4pw = FAN4_PWM; - - gnvs->f3of = FAN3_THRESHOLD_OFF; - gnvs->f3on = FAN3_THRESHOLD_ON; - gnvs->f3pw = FAN3_PWM; - - gnvs->f2of = FAN2_THRESHOLD_OFF; - gnvs->f2on = FAN2_THRESHOLD_ON; - gnvs->f2pw = FAN2_PWM; - - gnvs->f1of = FAN1_THRESHOLD_OFF; - gnvs->f1on = FAN1_THRESHOLD_ON; - gnvs->f1pw = FAN1_PWM; - - gnvs->f0of = FAN0_THRESHOLD_OFF; - gnvs->f0on = FAN0_THRESHOLD_ON; - gnvs->f0pw = FAN0_PWM; - - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; - gnvs->tmax = MAX_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - gnvs_ = gnvs; - - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* - * Enable Front USB ports in S5 by default - * to be consistent with back port behavior - */ - gnvs->s5u0 = 1; - gnvs->s5u1 = 1; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - acpi_update_thermal_table(gnvs); - - // Stumpy has no arms^H^H^H^HEC. - gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/intel/emeraldlake2/board_info.txt b/src/mainboard/intel/emeraldlake2/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/intel/emeraldlake2/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/intel/emeraldlake2/chromeos.c b/src/mainboard/intel/emeraldlake2/chromeos.c deleted file mode 100644 index 0c6e862..0000000 --- a/src/mainboard/intel/emeraldlake2/chromeos.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <bootmode.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <southbridge/intel/bd82x6x/pch.h> - -#ifndef __PRE_RAM__ -#include <boot/coreboot_tables.h> - -#define GPIO_COUNT 6 - -void fill_lb_gpios(struct lb_gpios *gpios) -{ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - - if (!gpio_base) - return; - - u32 gp_lvl = inl(gpio_base + 0x0c); - u32 gp_lvl2 = inl(gpio_base + 0x38); - /* u32 gp_lvl3 = inl(gpio_base + 0x48); */ - - gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); - gpios->count = GPIO_COUNT; - - /* Write Protect: GPIO48 */ - gpios->gpios[0].port = 48; - gpios->gpios[0].polarity = ACTIVE_LOW; - gpios->gpios[0].value = (gp_lvl2 >> (48-32)) & 1; - strncpy((char *)gpios->gpios[0].name,"write protect", - GPIO_MAX_NAME_LENGTH); - - /* Recovery: GPIO22 */ - gpios->gpios[1].port = 22; - gpios->gpios[1].polarity = ACTIVE_LOW; - gpios->gpios[1].value = (gp_lvl >> 22) & 1; - strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); - - /* Developer: GPIO57 */ - gpios->gpios[2].port = 57; - gpios->gpios[2].polarity = ACTIVE_LOW; - gpios->gpios[2].value = (gp_lvl2 >> (57-32)) & 1; - strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH); - - /* Hard code the lid switch GPIO to open. */ - gpios->gpios[3].port = -1; - gpios->gpios[3].polarity = ACTIVE_HIGH; - gpios->gpios[3].value = 1; - strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); - - /* Power Button */ - gpios->gpios[4].port = -1; - gpios->gpios[4].polarity = ACTIVE_HIGH; - gpios->gpios[4].value = 0; - strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); - - /* Did we load the VGA option ROM? */ - gpios->gpios[5].port = -1; - gpios->gpios[5].polarity = ACTIVE_HIGH; - gpios->gpios[5].value = gfx_get_init_done(); - strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); -} -#endif - -int get_developer_mode_switch(void) -{ - device_t dev; -#ifdef __PRE_RAM__ - dev = PCI_DEV(0, 0x1f, 0); -#else - dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); -#endif - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl2 = inl(gpio_base + 0x38); - - /* Developer: GPIO17, active high */ - return (gp_lvl2 >> (57-32)) & 1; -} - -int get_recovery_mode_switch(void) -{ - device_t dev; -#ifdef __PRE_RAM__ - dev = PCI_DEV(0, 0x1f, 0); -#else - dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); -#endif - u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; - u32 gp_lvl = inl(gpio_base + 0x0c); - - /* Recovery: GPIO22, active low */ - return !((gp_lvl >> 22) & 1); -} diff --git a/src/mainboard/intel/emeraldlake2/cmos.layout b/src/mainboard/intel/emeraldlake2/cmos.layout deleted file mode 100644 index 711ef4d..0000000 --- a/src/mainboard/intel/emeraldlake2/cmos.layout +++ /dev/null @@ -1,152 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -411 1 e 8 sata_mode -#412 4 r 0 unused - -# coreboot config options: bootloader -#Used by ChromeOS: -416 128 r 0 vbnv - -# coreboot config options: northbridge -544 3 e 11 gfx_uma_size - -#547 437 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 AHCI -8 1 Compatible -11 0 32M -11 1 64M -11 2 96M -11 3 128M -11 4 160M -11 5 192M -11 6 224M - -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/emeraldlake2/devicetree.cb b/src/mainboard/intel/emeraldlake2/devicetree.cb deleted file mode 100644 index 0d81502..0000000 --- a/src/mainboard/intel/emeraldlake2/devicetree.cb +++ /dev/null @@ -1,82 +0,0 @@ -chip northbridge/intel/sandybridge - - # Enable DisplayPort 1 Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DisplayPort 0 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Enable DVI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi1_routing" = "1" - register "gpi14_routing" = "2" - register "alt_gp_smi_en" = "0x0002" - register "gpe0_en" = "0x4000" - - register "sata_port_map" = "0x3f" - - # SuperIO range is 0x700-0x73f - register "gen2_dec" = "0x003c0701" - - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 off end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 (WLAN) - device pci 1c.1 off end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 (Debug) - device pci 1c.3 on end # PCIe Port #4 (LAN) - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1c.6 off end # PCIe Port #7 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on end # LPC bridge - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/intel/emeraldlake2/dsdt.asl b/src/mainboard/intel/emeraldlake2/dsdt.asl deleted file mode 100644 index cbac763..0000000 --- a/src/mainboard/intel/emeraldlake2/dsdt.asl +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include "acpi/thermal.asl" - - #include "../../../cpu/intel/model_206ax/acpi/cpu.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - #include "acpi/chromeos.asl" - #include <vendorcode/google/chromeos/acpi/chromeos.asl> - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/intel/emeraldlake2/ec.c b/src/mainboard/intel/emeraldlake2/ec.c deleted file mode 100644 index 9f2a944..0000000 --- a/src/mainboard/intel/emeraldlake2/ec.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/acpi.h> -#include <types.h> -#include <console/console.h> -#include <ec/smsc/mec1308/ec.h> -#include "ec.h" - -void lumpy_ec_init(void) -{ - printk(BIOS_DEBUG, "lumpy_ec_init\n"); - - if (acpi_is_wakeup_s3()) - return; - - /* - * Enable EC control of fan speed. - * - * This will be changed to OS control in ACPI EC _REG - * method when the OS is ready to control the fan. - */ - ec_write(EC_FAN_SPEED, 0); - - send_ec_command_data(EC_BATTERY_MODE, EC_BATTERY_MODE_NORMAL); - send_ec_command_data(EC_POWER_BUTTON_MODE, EC_POWER_BUTTON_MODE_OS); - send_ec_command(EC_SMI_DISABLE); - send_ec_command(EC_ACPI_ENABLE); - send_ec_command(EC_BACKLIGHT_ON); -} diff --git a/src/mainboard/intel/emeraldlake2/ec.h b/src/mainboard/intel/emeraldlake2/ec.h deleted file mode 100644 index 94a9a89..0000000 --- a/src/mainboard/intel/emeraldlake2/ec.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef LUMPY_EC_H -#define LUMPY_EC_H - -/* Commands */ -#define EC_SMI_ENABLE 0x74 -#define EC_SMI_DISABLE 0x75 -#define EC_ACPI_ENABLE 0x76 /* Enter ACPI mode */ -#define EC_ACPI_DISABLE 0x77 /* Exit ACPI mode */ - -/* Commands with data */ -#define EC_AUX_PORT_MODE 0x64 /* PS/2 control mode */ -#define EC_AUX_PORT_MODE_ENABLE 0x00 -#define EC_AUX_PORT_MODE_DISABLE 0x01 -#define EC_POWER_BUTTON_MODE 0x63 -#define EC_POWER_BUTTON_MODE_OS 0x00 /* OS control, 8 second override */ -#define EC_POWER_BUTTON_MODE_EC 0x00 /* EC control */ -#define EC_BACKLIGHT_OFF 0x67 /* Turn Backlight Off */ -#define EC_BACKLIGHT_ON 0x68 /* Turn Backlight On */ -#define EC_BATTERY_MODE 0x13 -#define EC_BATTERY_MODE_NORMAL 0x00 /* Normal mode */ -#define EC_BATTERY_MODE_EXTEND 0x01 /* Battery Life Cycle Extension */ - -/* EC RAM */ -#define EC_FAN_SPEED 0xca -#define EC_FAN_SPEED_LEVEL_0 0x01 /* Level 0 is fastest */ -#define EC_FAN_SPEED_LEVEL_1 0x02 /* Level 1 is fast */ -#define EC_FAN_SPEED_LEVEL_2 0x04 /* Level 2 is slow */ -#define EC_FAN_SPEED_LEVEL_3 0x08 /* Level 3 is slowest */ -#define EC_FAN_SPEED_LEVEL_4 0x10 /* Level 4 is off */ -#define EC_FAN_SPEED_FLAG_OS 0x80 /* OS control of fan speed */ - -extern void lumpy_ec_init(void); - -#endif // LUMPY_EC_H diff --git a/src/mainboard/intel/emeraldlake2/fadt.c b/src/mainboard/intel/emeraldlake2/fadt.c deleted file mode 100644 index 315cb58..0000000 --- a/src/mainboard/intel/emeraldlake2/fadt.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_DESKTOP; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/intel/emeraldlake2/gpio.h b/src/mainboard/intel/emeraldlake2/gpio.h deleted file mode 100644 index 05b9164..0000000 --- a/src/mainboard/intel/emeraldlake2/gpio.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef EMERALDLAKE2_GPIO_H -#define EMERALDLAKE2_GPIO_H - -#include "southbridge/intel/bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, - .gpio1 = GPIO_MODE_GPIO, - .gpio3 = GPIO_MODE_GPIO, - .gpio5 = GPIO_MODE_GPIO, - .gpio6 = GPIO_MODE_GPIO, - .gpio7 = GPIO_MODE_GPIO, - .gpio8 = GPIO_MODE_GPIO, - .gpio9 = GPIO_MODE_GPIO, - .gpio12 = GPIO_MODE_GPIO, - .gpio15 = GPIO_MODE_GPIO, - .gpio21 = GPIO_MODE_GPIO, - .gpio22 = GPIO_MODE_GPIO, - .gpio24 = GPIO_MODE_GPIO, - .gpio27 = GPIO_MODE_GPIO, - .gpio28 = GPIO_MODE_GPIO, -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_INPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio36 = GPIO_MODE_GPIO, - .gpio48 = GPIO_MODE_GPIO, - .gpio57 = GPIO_MODE_GPIO, - .gpio60 = GPIO_MODE_GPIO, -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio48 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { -}; - -const struct pch_gpio_map emeraldlake2_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; - -#endif diff --git a/src/mainboard/intel/emeraldlake2/hda_verb.c b/src/mainboard/intel/emeraldlake2/hda_verb.c deleted file mode 100644 index 96770de..0000000 --- a/src/mainboard/intel/emeraldlake2/hda_verb.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 - 0x10134210, // Subsystem ID - 0x00000007, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ - AZALIA_SUBVENDOR(0x0, 0x10134210), - - /* Pin Widget Verb Table */ - - /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), - - /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ - AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), - - /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), - - /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), - - /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), - - /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ - AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), - - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/emeraldlake2/mainboard.c b/src/mainboard/intel/emeraldlake2/mainboard.c deleted file mode 100644 index 347ce8a..0000000 --- a/src/mainboard/intel/emeraldlake2/mainboard.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/bd82x6x/pch.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/emeraldlake2/onboard.h b/src/mainboard/intel/emeraldlake2/onboard.h deleted file mode 100644 index 52f53e0..0000000 --- a/src/mainboard/intel/emeraldlake2/onboard.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef LUMPY_ONBOARD_H -#define LUMPY_ONBOARD_H - -#include <arch/smp/mpspec.h> - -#define LUMPY_LIGHTSENSOR_NAME "lightsensor" -#define LUMPY_LIGHTSENSOR_I2C_ADDR 0x44 -#define LUMPY_LIGHTSENSOR_GSI 20 -#define LUMPY_LIGHTSENSOR_IRQ 14 -#define LUMPY_LIGHTSENSOR_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) - -#define LUMPY_TRACKPAD_NAME "trackpad" -#define LUMPY_TRACKPAD_I2C_ADDR 0x67 -#define LUMPY_TRACKPAD_GSI 21 -#define LUMPY_TRACKPAD_IRQ 15 -#define LUMPY_TRACKPAD_IRQ_MODE (MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_LOW) - -#endif diff --git a/src/mainboard/intel/emeraldlake2/romstage.c b/src/mainboard/intel/emeraldlake2/romstage.c deleted file mode 100644 index 220b1d7..0000000 --- a/src/mainboard/intel/emeraldlake2/romstage.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <console/console.h> -#include "superio/smsc/sio1007/chip.h" -#include "northbridge/intel/sandybridge/sandybridge.h" -#include "northbridge/intel/sandybridge/raminit.h" -#include "southbridge/intel/bd82x6x/pch.h" -#include "southbridge/intel/bd82x6x/gpio.h" -#include <arch/cpu.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include "gpio.h" -#if CONFIG_CHROMEOS -#include <vendorcode/google/chromeos/chromeos.h> -#endif - -#define SIO_PORT 0x164e - -static void pch_enable_lpc(void) -{ - device_t dev = PCH_LPC_DEV; - - /* Set COM1/COM2 decode range */ - pci_write_config16(dev, LPC_IO_DEC, 0x0010); - - /* Enable SuperIO + PS/2 Keyboard/Mouse */ - u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; - pci_write_config16(dev, LPC_EN, lpc_config); - - /* Map 256 bytes at 0x1600 to the LPC bus. */ - pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); - - /* Map a range for the runtime_port registers to the LPC bus. */ - pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); - - /* Enable COM1 */ - if (sio1007_enable_uart_at(SIO_PORT)) { - pci_write_config16(dev, LPC_EN, - lpc_config | COMA_LPC_EN); - } -} - -static void rcba_config(void) -{ - u32 reg32; - - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQE - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D30IP) = (NOINT << D30IP_PIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_ALWAYS; - RCBA32(FD) = reg32; -} - -// FIXME, this function is generic code that should go to sb/... or -// nb/../early_init.c -static void early_pch_init(void) -{ - u8 reg8; - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); -} - -static void setup_sio_gpios(void) -{ - const u16 port = SIO_PORT; - const u16 runtime_port = 0x180; - - /* Turn on configuration mode. */ - outb(0x55, port); - - /* Set the GPIO direction, polarity, and type. */ - sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); - sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); - sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); - - /* Set the base address for the runtime register block. */ - sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); - sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); - - /* Turn on address decoding for it. */ - sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); - - /* Set the value of GPIO 10 by changing GP1, bit 0. */ - u8 byte; - byte = inb(runtime_port + 0xc); - byte |= (1 << 0); - outb(byte, runtime_port + 0xc); - - /* Turn off address decoding for it. */ - sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); - - /* Turn off configuration mode. */ - outb(0xaa, port); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = DEFAULT_MCHBAR, - .dmibar = DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 }, - .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, - .ec_present = 0, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 2, - .dimm_channel1_disabled = 2, - .max_ddr3_freq = 1600, - .usb_port_config = { - { 1, 0, 0x0040 }, /* P0: Front port (OC0) */ - { 1, 1, 0x0040 }, /* P1: Back port (OC1) */ - { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */ - { 1, 0, 0x0040 }, /* P3: MMC (no OC) */ - { 1, 2, 0x0040 }, /* P4: Front port (OC2) */ - { 0, 0, 0x0000 }, /* P5: Empty */ - { 0, 0, 0x0000 }, /* P6: Empty */ - { 0, 0, 0x0000 }, /* P7: Empty */ - { 1, 4, 0x0040 }, /* P8: Back port (OC4) */ - { 1, 4, 0x0040 }, /* P9: MINIPCIE3 (no OC) */ - { 1, 4, 0x0040 }, /* P10: BLUETOOTH (no OC) */ - { 0, 4, 0x0000 }, /* P11: Empty */ - { 1, 6, 0x0040 }, /* P12: Back port (OC6) */ - { 1, 5, 0x0040 }, /* P13: Back port (OC5) */ - }, - }; - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&emeraldlake2_gpio_map); - setup_sio_gpios(); - - /* Early SuperIO setup */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - hlt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3b); - /* Perform some initialization that must run before stage2 */ - early_pch_init(); - post_code(0x3c); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - hlt(); - } - northbridge_romstage_finalize(boot_mode==2); - - post_code(0x3f); -#if CONFIG_CHROMEOS - init_chromeos(boot_mode); -#endif - timestamp_add_now(TS_END_ROMSTAGE); -} diff --git a/src/mainboard/intel/emeraldlake2/smihandler.c b/src/mainboard/intel/emeraldlake2/smihandler.c deleted file mode 100644 index ba76eb8..0000000 --- a/src/mainboard/intel/emeraldlake2/smihandler.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - smm_get_gnvs()->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -/* - * Change LED_POWER# (SIO GPIO 45) state based on sleep type. - * The IO address is hardcoded as we don't have device path in SMM. - */ -#define SIO_GPIO_BASE_SET4 (0x730 + 3) -#define SIO_GPIO_BLINK_GPIO45 0x25 -void mainboard_smi_sleep(u8 slp_typ) -{ - u8 reg8; - - switch (slp_typ) { - case 3: - case 4: - break; - - case 5: - /* Turn off LED */ - reg8 = inb(SIO_GPIO_BASE_SET4); - reg8 |= (1 << 5); - outb(reg8, SIO_GPIO_BASE_SET4); - break; - } -} - -#define APMC_FINALIZE 0xcb - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APMC_FINALIZE: - if (mainboard_finalized) { - printk(BIOS_DEBUG, "SMI#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/intel/emeraldlake2/thermal.h b/src/mainboard/intel/emeraldlake2/thermal.h deleted file mode 100644 index 883849d..0000000 --- a/src/mainboard/intel/emeraldlake2/thermal.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef EMERALDLAKE2_THERMAL_H -#define EMERALDLAKE2_THERMAL_H - -/* Fan is OFF */ -#define FAN4_THRESHOLD_OFF 0 -#define FAN4_THRESHOLD_ON 0 -#define FAN4_PWM 0x00 - -/* Fan is at LOW speed */ -#define FAN3_THRESHOLD_OFF 48 -#define FAN3_THRESHOLD_ON 55 -#define FAN3_PWM 0x40 - -/* Fan is at MEDIUM speed */ -#define FAN2_THRESHOLD_OFF 52 -#define FAN2_THRESHOLD_ON 64 -#define FAN2_PWM 0x80 - -/* Fan is at HIGH speed */ -#define FAN1_THRESHOLD_OFF 60 -#define FAN1_THRESHOLD_ON 68 -#define FAN1_PWM 0xb0 - -/* Fan is at FULL speed */ -#define FAN0_THRESHOLD_OFF 66 -#define FAN0_THRESHOLD_ON 78 -#define FAN0_PWM 0xff - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 100 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 90 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/mainboard/intel/minnow_max/Kconfig b/src/mainboard/intel/minnow_max/Kconfig new file mode 100644 index 0000000..afcb6ef --- /dev/null +++ b/src/mainboard/intel/minnow_max/Kconfig @@ -0,0 +1,127 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_INTEL_MINNOW_MAX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SOC_INTEL_FSP_BAYTRAIL + select BOARD_ROMSIZE_KB_4096 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select OVERRIDE_MRC_CACHE_LOC + select TSC_MONOTONIC_TIMER + select HAVE_ACPI_RESUME + +config MAINBOARD_DIR + string + default "intel/minnow_max" + +config INCLUDE_ME + bool + default n + +config LOCK_MANAGEMENT_ENGINE + bool + default n + +config MAINBOARD_PART_NUMBER + string + default "Minnow Max" + +choice + prompt "Memory SKU to build" + default MINNOWMAX_1GB_SKU + +config MINNOWMAX_1GB_SKU + bool "1GB" + +config MINNOWMAX_2GB_SKU + bool "2GB" +endchoice + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config CACHE_ROM_SIZE_OVERRIDE + hex + default 0x800000 + +config FSP_LOC + hex + default 0xfffc0000 + +config FSP_FILE + string + default "../intel/mainboard/intel/minnow_max/fsp/FvFsp_E3825_2gb.bin" if MINNOWMAX_2GB_SKU + default "../intel/mainboard/intel/minnow_max/fsp/FvFsp_E3825_1gb.bin" + +config MRC_CACHE_LOC_OVERRIDE + hex + default 0xfff90000 + depends on ENABLE_FSP_FAST_BOOT + +config CBFS_SIZE + hex + default 0x00300000 + +config DRIVERS_PS2_KEYBOARD + bool + default n + +config CONSOLE_POST + bool + default y + +config ENABLE_FSP_FAST_BOOT + bool + depends on HAVE_FSP_BIN + default y + +config VIRTUAL_ROM_SIZE + hex + depends on ENABLE_FSP_FAST_BOOT + default 0x800000 + +config POST_IO + bool + default n + +config POST_DEVICE + bool + default n + +config VGA_BIOS + bool + default n + +config VGA_BIOS_FILE + string + default "../intel/mainboard/intel/minnow_max/Vga.dat" if VGA_BIOS + +endif # BOARD_INTEL_MINNOW_MAX diff --git a/src/mainboard/intel/minnow_max/Makefile.inc b/src/mainboard/intel/minnow_max/Makefile.inc new file mode 100644 index 0000000..2f7a8c5 --- /dev/null +++ b/src/mainboard/intel/minnow_max/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += gpio.c +ramstage-y += irqroute.c diff --git a/src/mainboard/intel/minnow_max/acpi/ec.asl b/src/mainboard/intel/minnow_max/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/minnow_max/acpi/mainboard.asl b/src/mainboard/intel/minnow_max/acpi/mainboard.asl new file mode 100644 index 0000000..c1884c5 --- /dev/null +++ b/src/mainboard/intel/minnow_max/acpi/mainboard.asl @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) +} diff --git a/src/mainboard/intel/minnow_max/acpi/superio.asl b/src/mainboard/intel/minnow_max/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/minnow_max/acpi_tables.c b/src/mainboard/intel/minnow_max/acpi_tables.c new file mode 100644 index 0000000..881c143 --- /dev/null +++ b/src/mainboard/intel/minnow_max/acpi_tables.c @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <lib.h> // hexdump +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <baytrail/acpi.h> +#include <baytrail/nvs.h> +#include <baytrail/iomap.h> + + +extern const unsigned char AmlCode[]; + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + acpi_init_gnvs(gnvs); + + /* No TPM Present */ + gnvs->tpmp = 0; + +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + current = acpi_madt_irq_overrides(current); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + generate_cpu_entries(); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *dsdt; + global_nvs_t *gnvs; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + printk(BIOS_DEBUG, "ACPI: * FACS @ %p Length %x", facs, + facs->length); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + ALIGN_CURRENT; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x", dsdt, + dsdt->length); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + printk(BIOS_DEBUG, "ACPI: * FADT @ %p Length %x", fadt, + fadt->header.length); + + /* + * We explicitly add these tables later on: + */ + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_intel_hpet(hpet); + acpi_add_table(rsdp, hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p Length %x\n", hpet, + hpet->header.length); + + /* If we want to use HPET Timers Linux wants an MADT */ + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + printk(BIOS_DEBUG, "ACPI: * MADT @ %p Length %x\n",madt, + madt->header.length); + + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + printk(BIOS_DEBUG, "ACPI: * MCFG @ %p Length %x\n",mcfg, + mcfg->header.length); + + /* Update GNVS pointer into CBMEM */ + gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); + if (!gnvs) { + printk(BIOS_DEBUG, "ACPI: Could not find CBMEM GNVS\n"); + gnvs = (global_nvs_t *)current; + } + + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> %p\n", i, gnvs); + *(u32*)(((u32)dsdt) + i) = (unsigned long)gnvs; + acpi_save_gnvs((unsigned long)gnvs); + break; + } + } + + /* And fill it */ + acpi_create_gnvs(gnvs); + + /* And tell SMI about it */ +#if CONFIG_HAVE_SMI_HANDLER + smm_setup_structures(gnvs, NULL, NULL); +#endif + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI Updated DSDT @ %p Length %x\n", dsdt, + dsdt->length); + + ssdt = (acpi_header_t *)current; + memset(ssdt, 0, sizeof(acpi_header_t)); + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + if (ssdt->length) { + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p Length %x\n",ssdt, + ssdt->length); + ALIGN_CURRENT; + } else { + ssdt = NULL; + printk(BIOS_DEBUG, "ACPI: * SSDT not generated.\n"); + } + + ssdt2 = (acpi_header_t *)current; + memset(ssdt2, 0, sizeof(acpi_header_t)); + acpi_create_serialio_ssdt(ssdt2); + if (ssdt2->length) { + current += ssdt2->length; + acpi_add_table(rsdp, ssdt2); + printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2, + ssdt2->length); + ALIGN_CURRENT; + } else { + ssdt2 = NULL; + printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n"); + } + + printk(BIOS_DEBUG, "current = %lx\n", current); + +#if IS_ENABLED(CONFIG_DUMP_ACPI_TABLES) + printk(BIOS_DEBUG, "rsdp\n"); + hexdump(BIOS_DEBUG, rsdp, sizeof(acpi_rsdp_t)); + + printk(BIOS_DEBUG, "rsdt\n"); + hexdump(BIOS_DEBUG, rsdt, sizeof(acpi_rsdt_t)); + + printk(BIOS_DEBUG, "hpet\n"); + hexdump(BIOS_DEBUG, hpet, hpet->header.length); + + printk(BIOS_DEBUG, "madt\n"); + hexdump(BIOS_DEBUG, madt, madt->header.length); + + printk(BIOS_DEBUG, "mcfg\n"); + hexdump(BIOS_DEBUG, mcfg, mcfg->header.length); + + printk(BIOS_DEBUG, "dsdt\n"); + hexdump(BIOS_DEBUG, dsdt, dsdt->length); + + if (ssdt != NULL) { + printk(BIOS_DEBUG, "ssdt\n"); + hexdump(BIOS_DEBUG, ssdt, ssdt->length); + } + + if (ssdt2 != NULL) { + printk(BIOS_DEBUG, "ssdt2\n"); + hexdump(BIOS_DEBUG, ssdt2, ssdt2->length); + } + + printk(BIOS_DEBUG, "fadt\n"); + hexdump(BIOS_DEBUG, fadt, fadt->header.length); + + printk(BIOS_DEBUG, "facs\n"); + hexdump(BIOS_DEBUG, facs, facs->length); + +#endif /* IS_ENABLED(CONFIG_DUMP_ACPI_TABLES) */ + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/intel/minnow_max/board_info.txt b/src/mainboard/intel/minnow_max/board_info.txt new file mode 100644 index 0000000..9dac60b --- /dev/null +++ b/src/mainboard/intel/minnow_max/board_info.txt @@ -0,0 +1,3 @@ +Category: sbc +ROM protocol: SPI +Flashrom support: y diff --git a/src/mainboard/intel/minnow_max/cmos.layout b/src/mainboard/intel/minnow_max/cmos.layout new file mode 100644 index 0000000..a668188 --- /dev/null +++ b/src/mainboard/intel/minnow_max/cmos.layout @@ -0,0 +1,139 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +#save timestamps in pre-ram boot areas +1719 64 h 0 timestamp_value1 +1783 64 h 0 timestamp_value2 +1847 64 h 0 timestamp_value3 +1911 64 h 0 timestamp_value4 +1975 64 h 0 timestamp_value5 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/minnow_max/devicetree.cb b/src/mainboard/intel/minnow_max/devicetree.cb new file mode 100644 index 0000000..4e3833e --- /dev/null +++ b/src/mainboard/intel/minnow_max/devicetree.cb @@ -0,0 +1,80 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip soc/intel/fsp_baytrail + + #### ACPI Register Settings #### + register "fadt_pm_profile" = "PM_UNSPECIFIED" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + + #### FSP register settings #### + register "SataMode" = "SATA_MODE_AHCI" + register "MrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" + register "MrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" + register "MrcInitTsegSize" = "TSEG_SIZE_DEFAULT" + register "MrcInitMmioSize" = "MMIO_SIZE_DEFAULT" + register "eMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" + register "IgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" + register "ApertureSize" = "APERTURE_SIZE_DEFAULT" + register "GttSize" = "GTT_SIZE_DEFAULT" + register "LpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # 8086 0F00 - SoC router - + device pci 02.0 on end # 8086 0F31 - GFX micro HDMI + device pci 03.0 off end # 8086 0F38 - MIPI - + + device pci 10.0 off end # 8086 0F14 - EMMC Port - + device pci 11.0 off end # 8086 0F15 - SDIO Port - + device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 + device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC + device pci 14.0 on end # 8086 0F35 - USB XHCI Onboard & HSEC + device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC + device pci 17.0 off end # 8086 0F50 - MMC Port - + device pci 18.0 on end # 8086 0F40 - SIO - DMA - + device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - + device pci 18.2 off end # 8086 0F42 - I2C Port 2 (1) - (testpoints) + device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - + device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - + device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - + device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) LSEC + device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC + device pci 1a.0 on end # 8086 0F18 - TXE - + device pci 1b.0 off end # 8086 0F04 - HD Audio - + device pci 1c.0 off end # 8086 0F48 - PCIe Port 1 (0) - + device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - + device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE + device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC + device pci 1d.0 off end # 8086 0F34 - USB EHCI - + device pci 1e.0 on end # 8086 0F06 - SIO - DMA - + device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC + device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC + device pci 1e.3 on end # 8086 0F0A - HSUART 1 LSEC + device pci 1e.4 on end # 8086 0F0C - HSUART 2 LSEC + device pci 1e.5 on end # 8086 0F0E - SPI LSEC + device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector + device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC + end +end diff --git a/src/mainboard/intel/minnow_max/dsdt.asl b/src/mainboard/intel/minnow_max/dsdt.asl new file mode 100644 index 0000000..cb2a4da --- /dev/null +++ b/src/mainboard/intel/minnow_max/dsdt.asl @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define INCLUDE_LPE 1 +#define INCLUDE_SCC 1 +#define INCLUDE_EHCI 1 +#define INCLUDE_XHCI 1 +#define INCLUDE_LPSS 1 + + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include <soc/intel/fsp_baytrail/acpi/platform.asl> + + // global NVS and variables + #include <soc/intel/fsp_baytrail/acpi/globalnvs.asl> + + #include <soc/intel/fsp_baytrail/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <soc/intel/fsp_baytrail/acpi/southcluster.asl> + } + } + + /* Chipset specific sleep states */ + #include <soc/intel/fsp_baytrail/acpi/sleepstates.asl> + + #include "acpi/mainboard.asl" +} diff --git a/src/mainboard/intel/minnow_max/fadt.c b/src/mainboard/intel/minnow_max/fadt.c new file mode 100644 index 0000000..91995f0 --- /dev/null +++ b/src/mainboard/intel/minnow_max/fadt.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpi.h> +#include <baytrail/acpi.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + acpi_fill_in_fadt(fadt,facs,dsdt); + + /* Platform specific customizations go here */ + + header->checksum = 0; + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); + +} diff --git a/src/mainboard/intel/minnow_max/gpio.c b/src/mainboard/intel/minnow_max/gpio.c new file mode 100644 index 0000000..9b735cf --- /dev/null +++ b/src/mainboard/intel/minnow_max/gpio.c @@ -0,0 +1,235 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <baytrail/gpio.h> +#include "irqroute.h" + +/* + * For multiplexed functions, look in EDS: + * 10.3 Ball Name and Function by Location + * + * The pads list is in the BWG_VOL2 Rev1p2: + * Note that Pad # is not the same as GPIO# + * 37 GPIO Handling: + * Table 37-1. SCORE Pads List + * Table 37-2. SSUSORE Pads List + */ + +/* NCORE GPIOs */ +static const struct soc_gpio_map gpncore_gpio_map[] = { + GPIO_FUNC2, /* GPIO_S0_NC[00] - HDMI_HPD */ + GPIO_FUNC2, /* GPIO_S0_NC[01] - HDMI_DDCDAT */ + GPIO_FUNC2, /* GPIO_S0_NC[02] - HDMI_DDCCLK */ + GPIO_NC, /* GPIO_S0_NC[03] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[04] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[05] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[06] - No Connect */ + GPIO_FUNC2, /* GPIO_S0_NC[07] - DDI1_DDCDAT */ + GPIO_NC, /* GPIO_S0_NC[08] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[09] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[10] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[11] - No Connect */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_NC[12] - TP15 */ + GPIO_NC, /* GPIO_S0_NC[13] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[14] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[15] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[16] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[17] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[18] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[19] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[20] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[21] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[22] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[23] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[24] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[25] - No Connect */ + GPIO_NC, /* GPIO_S0_NC[26] - No Connect */ + GPIO_END +}; + +/* SCORE GPIOs (GPIO_S0_SC_XX)*/ +static const struct soc_gpio_map gpscore_gpio_map[] = { + GPIO_FUNC1, /* GPIO_S0_SC[000] - SATA_GP0 */ + GPIO_FUNC1, /* GPIO_S0_SC[001] - SATA_GP1 */ + GPIO_FUNC1, /* GPIO_S0_SC[002] - SATA_LED_B */ + GPIO_FUNC1, /* GPIO_S0_SC[003] - PCIE_CLKREQ_0 */ + GPIO_FUNC1, /* GPIO_S0_SC[004] - PCIE_CLKREQ_1 */ + GPIO_FUNC1, /* GPIO_S0_SC[005] - PCIE_CLKREQ_2 */ + GPIO_FUNC1, /* GPIO_S0_SC[006] - PCIE_CLKREQ_3 */ + GPIO_FUNC2, /* GPIO_S0_SC[007] - SD3_WP */ + GPIO_NC, /* GPIO_S0_SC[008] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[009] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[010] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[011] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[012] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[013] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[014] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[015] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[016] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[017] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[018] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[019] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[020] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[021] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[022] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[023] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[024] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[025] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[026] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[027] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[028] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[029] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[030] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[031] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[032] - No Connect */ + GPIO_FUNC1, /* GPIO_S0_SC[033] - SD3_CLK */ + GPIO_FUNC1, /* GPIO_S0_SC[034] - SD3_D0 */ + GPIO_FUNC1, /* GPIO_S0_SC[035] - SD3_D1 */ + GPIO_FUNC1, /* GPIO_S0_SC[036] - SD3_D2 */ + GPIO_FUNC1, /* GPIO_S0_SC[037] - SD3_D3 */ + GPIO_FUNC1, /* GPIO_S0_SC[038] - SD3_CD# */ + GPIO_FUNC1, /* GPIO_S0_SC[039] - SD3_CMD */ + GPIO_FUNC1, /* GPIO_S0_SC[040] - TP12 (SD3_1P8EN) */ + GPIO_FUNC1, /* GPIO_S0_SC[041] - TP11 (/SD3_PWREN) */ + GPIO_NC, /* GPIO_S0_SC[042] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[043] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[044] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[045] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[046] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[047] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[048] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[049] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[050] - No Connect */ + GPIO_FUNC1, /* GPIO_S0_SC[051] - PCU_SMB_DATA */ + GPIO_FUNC1, /* GPIO_S0_SC[052] - PCU_SMB_CLK */ + GPIO_FUNC1, /* GPIO_S0_SC[053] - PCU_SMB_ALERT */ + GPIO_FUNC1, /* GPIO_S0_SC[054] - ILB_8254_SPKR */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_SC[055] - TP8 (GPIO_S0_SC_55) */ + GPIO_FUNC0, /* GPIO_S0_SC[056] - GPIO_S0_SC_56 */ + GPIO_FUNC1, /* GPIO_S0_SC[057] - PCU_UART3_TXD */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_SC[058] - TP9 (GPIO_S0_SC_58) */ + GPIO_FUNC0, /* GPIO_S0_SC[059] - HDMI_DCDC_ENB */ + GPIO_FUNC0, /* GPIO_S0_SC[060] - HDMI_LDSW_ENB */ + GPIO_FUNC1, /* GPIO_S0_SC[061] - PCU_UART3_RXD */ + GPIO_FUNC1, /* GPIO_S0_SC[062] - LPE_I2S_CLK */ + GPIO_FUNC1, /* GPIO_S0_SC[063] - LPE_I2S_FRM */ + GPIO_FUNC1, /* GPIO_S0_SC[064] - LPE_I2S_DATIN */ + GPIO_FUNC1, /* GPIO_S0_SC[065] - LPE_I2S_DATOUT */ + GPIO_FUNC1, /* GPIO_S0_SC[066] - SOC_SIO_SPI_CS1 */ + GPIO_FUNC1, /* GPIO_S0_SC[067] - SOC_SIO_SPI_MISO */ + GPIO_FUNC1, /* GPIO_S0_SC[068] - SOC_SIO_SPI_MOSI */ + GPIO_FUNC1, /* GPIO_S0_SC[069] - SOC_SIO_SPI_CLK */ + GPIO_FUNC1, /* GPIO_S0_SC[070] - SIO_UART1_RXD */ + GPIO_FUNC1, /* GPIO_S0_SC[071] - SIO_UART1_TXD */ + GPIO_FUNC1, /* GPIO_S0_SC[072] - SIO_UART1_RTSB */ + GPIO_FUNC1, /* GPIO_S0_SC[073] - SIO_UART1_CTSB */ + GPIO_FUNC1, /* GPIO_S0_SC[074] - SIO_UART2_RXD */ + GPIO_FUNC1, /* GPIO_S0_SC[075] - SIO_UART2_TXD */ + GPIO_NC, /* GPIO_S0_SC[076] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[077] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[078] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[079] - No Connect */ + GPIO_FUNC1, /* GPIO_S0_SC[080] - TP6 (SIO_I2C1_SDA) */ + GPIO_FUNC1, /* GPIO_S0_SC[081] - TP5 (SIO_I2C1_SCL) */ + GPIO_NC, /* GPIO_S0_SC[082] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[083] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[084] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[085] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[086] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[087] - No Connect */ + GPIO_FUNC1, /* GPIO_S0_SC[088] - LSS_I2C_SDA */ + GPIO_FUNC1, /* GPIO_S0_SC[089] - LSS_I2C_SCL */ + GPIO_FUNC1, /* GPIO_S0_SC[090] - EXP_I2C_SDA */ + GPIO_FUNC1, /* GPIO_S0_SC[091] - EXP_I2C_SCL */ + GPIO_FUNC(1, PULL_UP, 20K), /* GPIO_S0_SC[092] - TP13 */ + GPIO_FUNC(1, PULL_UP, 20K), /* GPIO_S0_SC[093] - TP16 */ + GPIO_FUNC1, /* GPIO_S0_SC[094] - SOC_PWM0 */ + GPIO_FUNC1, /* GPIO_S0_SC[095] - SOC_PWM1 */ + GPIO_NC, /* GPIO_S0_SC[096] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[097] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[098] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[099] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[100] - No Connect */ + GPIO_NC, /* GPIO_S0_SC[101] - No Connect */ + GPIO_END +}; + +/* SSUS GPIOs (GPIO_S5) */ +static const struct soc_gpio_map gpssus_gpio_map[] = { + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[00] - SOC_GPIO_S5_0 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[01] - SOC_GPIO_S5_1 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[02] - SOC_GPIO_S5_2 */ + GPIO_FUNC6, /* GPIO_S5[03] - mPCIE_WAKEB */ + GPIO_NC, /* GPIO_S5[04] - No Connect */ + GPIO_INPUT, /* GPIO_S5[05] - BOM_OP1 */ + GPIO_INPUT, /* GPIO_S5[06] - BOM_OP2 */ + GPIO_INPUT, /* GPIO_S5[07] - BOM_OP3 */ + GPIO_OUT_HIGH, /* GPIO_S5[08] - SOC_USB_HOST_EN0 */ + GPIO_OUT_HIGH, /* GPIO_S5[09] - SOC_USB_HOST_EN1 */ + GPIO_OUT_HIGH, /* GPIO_S5[10] - GPIO_S5_10_UNLOCK */ + GPIO_FUNC0, /* GPIO_S5[11] - SUSPWRDNACK (TP14) */ + GPIO_FUNC0, /* GPIO_S5[12] - PMC_SUSCLK0 */ + GPIO_FUNC1, /* GPIO_S5[13] - PMC_SLP_S0IX (TP10) */ + GPIO_FUNC1, /* GPIO_S5[14] - GPIO_S514_J20 */ + GPIO_FUNC0, /* GPIO_S5[15] - PMC_PCIE_WAKE_R */ + GPIO_FUNC0, /* GPIO_S5[16] - PMC_PWRBTN */ + GPIO_NC1, /* GPIO_S5[17] - No Connect */ + GPIO_FUNC1, /* GPIO_S5[18] - LPCPD_L (TP7) */ + GPIO_FUNC0, /* GPIO_S5[19] - SOC_USB_HOST_OC0 */ + GPIO_FUNC0, /* GPIO_S5[20] - SOC_USB_HOST_OC1 */ + GPIO_FUNC0, /* GPIO_S5[21] - SOC_SPI_CS1B */ + GPIO_NC, /* GPIO_S5[22] - No Connect */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[23] - XDP_H_OBSDATA_A0 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[24] - XDP_H_OBSDATA_A1 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[25] - XDP_H_OBSDATA_A2 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[26] - XDP_H_OBSDATA_A3 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[27] - EXP_GPIO1 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[28] - EXP_GPIO2 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[29] - EXP_GPIO3 */ + GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[30] - EXP_GPIO4 */ + GPIO_NC, /* GPIO_S5[31] - No Connect */ + GPIO_NC, /* GPIO_S5[32] - No Connect */ + GPIO_NC, /* GPIO_S5[33] - No Connect */ + GPIO_NC, /* GPIO_S5[34] - No Connect */ + GPIO_NC, /* GPIO_S5[35] - No Connect */ + GPIO_NC, /* GPIO_S5[36] - No Connect */ + GPIO_NC, /* GPIO_S5[37] - No Connect */ + GPIO_NC, /* GPIO_S5[38] - No Connect */ + GPIO_NC, /* GPIO_S5[39] - No Connect */ + GPIO_NC, /* GPIO_S5[40] - No Connect */ + GPIO_NC, /* GPIO_S5[41] - No Connect */ + GPIO_NC, /* GPIO_S5[42] - No Connect */ + GPIO_NC, /* GPIO_S5[43] - No Connect */ + GPIO_END +}; + +static struct soc_gpio_config gpio_config = { + .ncore = gpncore_gpio_map, + .score = gpscore_gpio_map, + .ssus = gpssus_gpio_map, + .core_dirq = NULL, + .sus_dirq = NULL, +}; + +struct soc_gpio_config* mainboard_get_gpios(void) +{ + return &gpio_config; +} diff --git a/src/mainboard/intel/minnow_max/irqroute.c b/src/mainboard/intel/minnow_max/irqroute.c new file mode 100644 index 0000000..552be8f --- /dev/null +++ b/src/mainboard/intel/minnow_max/irqroute.c @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "irqroute.h" + +DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/minnow_max/irqroute.h b/src/mainboard/intel/minnow_max/irqroute.h new file mode 100644 index 0000000..99c3776 --- /dev/null +++ b/src/mainboard/intel/minnow_max/irqroute.h @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef IRQROUTE_H +#define IRQROUTE_H + +#include <soc/intel/fsp_baytrail/baytrail/irq.h> +#include <soc/intel/fsp_baytrail/baytrail/pci_devs.h> + +/* + *IR02h GFX INT(A) - PIRQ A + *IR10h EMMC INT(ABCD) - PIRQ DEFG + *IR11h SDIO INT(A) - PIRQ B + *IR12h SD INT(A) - PIRQ C + *IR13h SATA INT(A) - PIRQ D + *IR14h XHCI INT(A) - PIRQ E + *IR15h LP Audio INT(A) - PIRQ F + *IR17h MMC INT(A) - PIRQ F + *IR18h SIO INT(ABCD) - PIRQ BADC + *IR1Ah TXE INT(A) - PIRQ F + *IR1Bh HD Audio INT(A) - PIRQ G + *IR1Ch PCIe INT(ABCD) - PIRQ EFGH + *IR1Dh EHCI INT(A) - PIRQ D + *IR1Eh SIO INT(ABCD) - PIRQ BDEF + *IR1Fh LPC INT(ABCD) - PIRQ HGBC + */ +#define PCI_DEV_PIRQ_ROUTES \ + PCI_DEV_PIRQ_ROUTE(GFX_DEV, A, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(EMMC_DEV, D, E, F, G), \ + PCI_DEV_PIRQ_ROUTE(SDIO_DEV, B, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SD_DEV, C, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SATA_DEV, D, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(XHCI_DEV, E, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(LPE_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(MMC45_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SIO1_DEV, B, A, D, C), \ + PCI_DEV_PIRQ_ROUTE(TXE_DEV, F, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(HDA_DEV, G, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(PCIE_DEV, E, F, G, H), \ + PCI_DEV_PIRQ_ROUTE(EHCI_DEV, D, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SIO2_DEV, B, D, E, F), \ + PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) + +/* + * Route each PIRQ[A-H] to a PIC IRQ[0-15] + * Reserved: 0, 1, 2, 8, 13 + * PS2 keyboard: 12 + * ACPI/SCI: 9 + * Floppy: 6 + */ +#define PIRQ_PIC_ROUTES \ + PIRQ_PIC(A, 4), \ + PIRQ_PIC(B, 5), \ + PIRQ_PIC(C, 7), \ + PIRQ_PIC(D, 10), \ + PIRQ_PIC(E, 11), \ + PIRQ_PIC(F, 12), \ + PIRQ_PIC(G, 14), \ + PIRQ_PIC(H, 15) + +#endif /* IRQROUTE_H */ diff --git a/src/mainboard/intel/minnow_max/mainboard.c b/src/mainboard/intel/minnow_max/mainboard.c new file mode 100644 index 0000000..3da1e23 --- /dev/null +++ b/src/mainboard/intel/minnow_max/mainboard.c @@ -0,0 +1,45 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Sage Electronic Engineering, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> + +/* + * mainboard_enable is executed as first thing after enumerate_buses(). + * This is the earliest point to add customization. + */ +static void mainboard_enable(device_t dev) +{ +} + +/* + * mainboard_final is executed as one of the last items before loading the + * payload. + * + * This is the latest point to add customization. + */ +static void mainboard_final(void *chip_info) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, + .final = mainboard_final, +}; diff --git a/src/mainboard/intel/minnow_max/romstage.c b/src/mainboard/intel/minnow_max/romstage.c new file mode 100644 index 0000000..460c668 --- /dev/null +++ b/src/mainboard/intel/minnow_max/romstage.c @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <baytrail/romstage.h> +#include <drivers/intel/fsp/fsp_util.h> + +/** + * /brief mainboard call for setup that needs to be done before fsp init + * + */ +void early_mainboard_romstage_entry() +{ + +} + +/** + * Get function disables - most of these will be done automatically + * @param fd_mask + * @param fd2_mask + */ +void get_func_disables(uint32_t *fd_mask, uint32_t *fd2_mask) +{ + +} + +/** + * /brief mainboard call for setup that needs to be done after fsp init + * + */ +void late_mainboard_romstage_entry() +{ + +} + +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) +{ + UPD_DATA_REGION *UpdData = FspRtBuffer->Common.UpdDataRgnPtr; + + /* Disable 2nd DIMM */ + UpdData->PcdMrcInitSPDAddr2 = 0x00; + + return; +} diff --git a/src/mainboard/intel/minnowmax/Kconfig b/src/mainboard/intel/minnowmax/Kconfig deleted file mode 100644 index 9ba6874..0000000 --- a/src/mainboard/intel/minnowmax/Kconfig +++ /dev/null @@ -1,127 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_INTEL_MINNOWMAX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SOC_INTEL_FSP_BAYTRAIL - select BOARD_ROMSIZE_KB_4096 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select OVERRIDE_MRC_CACHE_LOC - select TSC_MONOTONIC_TIMER - select HAVE_ACPI_RESUME - -config MAINBOARD_DIR - string - default "intel/minnowmax" - -config INCLUDE_ME - bool - default n - -config LOCK_MANAGEMENT_ENGINE - bool - default n - -config MAINBOARD_PART_NUMBER - string - default "Minnow Max" - -choice - prompt "Memory SKU to build" - default MINNOWMAX_1GB_SKU - -config MINNOWMAX_1GB_SKU - bool "1GB" - -config MINNOWMAX_2GB_SKU - bool "2GB" -endchoice - -config MMCONF_BASE_ADDRESS - hex - default 0xe0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config CACHE_ROM_SIZE_OVERRIDE - hex - default 0x800000 - -config FSP_LOC - hex - default 0xfffc0000 - -config FSP_FILE - string - default "../intel/mainboard/intel/minnowmax/fsp/FvFsp_E3825_2gb.bin" if MINNOWMAX_2GB_SKU - default "../intel/mainboard/intel/minnowmax/fsp/FvFsp_E3825_1gb.bin" - -config MRC_CACHE_LOC_OVERRIDE - hex - default 0xfff90000 - depends on ENABLE_FSP_FAST_BOOT - -config CBFS_SIZE - hex - default 0x00300000 - -config DRIVERS_PS2_KEYBOARD - bool - default n - -config CONSOLE_POST - bool - default y - -config ENABLE_FSP_FAST_BOOT - bool - depends on HAVE_FSP_BIN - default y - -config VIRTUAL_ROM_SIZE - hex - depends on ENABLE_FSP_FAST_BOOT - default 0x800000 - -config POST_IO - bool - default n - -config POST_DEVICE - bool - default n - -config VGA_BIOS - bool - default n - -config VGA_BIOS_FILE - string - default "../intel/mainboard/intel/minnowmax/Vga.dat" if VGA_BIOS - -endif # BOARD_INTEL_MINNOWMAX diff --git a/src/mainboard/intel/minnowmax/Makefile.inc b/src/mainboard/intel/minnowmax/Makefile.inc deleted file mode 100644 index 2f7a8c5..0000000 --- a/src/mainboard/intel/minnowmax/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += gpio.c -ramstage-y += irqroute.c diff --git a/src/mainboard/intel/minnowmax/acpi/ec.asl b/src/mainboard/intel/minnowmax/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/minnowmax/acpi/mainboard.asl b/src/mainboard/intel/minnowmax/acpi/mainboard.asl deleted file mode 100644 index c1884c5..0000000 --- a/src/mainboard/intel/minnowmax/acpi/mainboard.asl +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) -} diff --git a/src/mainboard/intel/minnowmax/acpi/superio.asl b/src/mainboard/intel/minnowmax/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/minnowmax/acpi_tables.c b/src/mainboard/intel/minnowmax/acpi_tables.c deleted file mode 100644 index 881c143..0000000 --- a/src/mainboard/intel/minnowmax/acpi_tables.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <lib.h> // hexdump -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> -#include <baytrail/acpi.h> -#include <baytrail/nvs.h> -#include <baytrail/iomap.h> - - -extern const unsigned char AmlCode[]; - -static void acpi_create_gnvs(global_nvs_t *gnvs) -{ - acpi_init_gnvs(gnvs); - - /* No TPM Present */ - gnvs->tpmp = 0; - -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - current = acpi_madt_irq_overrides(current); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, - const char *oem_table_id) -{ - generate_cpu_entries(); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -#define ALIGN_CURRENT current = (ALIGN(current, 16)) -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - int i; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_xsdt_t *xsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_mcfg_t *mcfg; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *dsdt; - global_nvs_t *gnvs; - - current = start; - - /* Align ACPI tables to 16byte */ - ALIGN_CURRENT; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - ALIGN_CURRENT; - xsdt = (acpi_xsdt_t *) current; - current += sizeof(acpi_xsdt_t); - ALIGN_CURRENT; - - /* clear all table memory */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, xsdt); - acpi_write_rsdt(rsdt); - acpi_write_xsdt(xsdt); - - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - ALIGN_CURRENT; - acpi_create_facs(facs); - printk(BIOS_DEBUG, "ACPI: * FACS @ %p Length %x", facs, - facs->length); - - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - ALIGN_CURRENT; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x", dsdt, - dsdt->length); - - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - ALIGN_CURRENT; - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - printk(BIOS_DEBUG, "ACPI: * FADT @ %p Length %x", fadt, - fadt->header.length); - - /* - * We explicitly add these tables later on: - */ - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - ALIGN_CURRENT; - acpi_create_intel_hpet(hpet); - acpi_add_table(rsdp, hpet); - printk(BIOS_DEBUG, "ACPI: * HPET @ %p Length %x\n", hpet, - hpet->header.length); - - /* If we want to use HPET Timers Linux wants an MADT */ - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, madt); - printk(BIOS_DEBUG, "ACPI: * MADT @ %p Length %x\n",madt, - madt->header.length); - - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, mcfg); - printk(BIOS_DEBUG, "ACPI: * MCFG @ %p Length %x\n",mcfg, - mcfg->header.length); - - /* Update GNVS pointer into CBMEM */ - gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); - if (!gnvs) { - printk(BIOS_DEBUG, "ACPI: Could not find CBMEM GNVS\n"); - gnvs = (global_nvs_t *)current; - } - - for (i=0; i < dsdt->length; i++) { - if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " - "DSDT at offset 0x%04x -> %p\n", i, gnvs); - *(u32*)(((u32)dsdt) + i) = (unsigned long)gnvs; - acpi_save_gnvs((unsigned long)gnvs); - break; - } - } - - /* And fill it */ - acpi_create_gnvs(gnvs); - - /* And tell SMI about it */ -#if CONFIG_HAVE_SMI_HANDLER - smm_setup_structures(gnvs, NULL, NULL); -#endif - - current += sizeof(global_nvs_t); - ALIGN_CURRENT; - - /* We patched up the DSDT, so we need to recalculate the checksum */ - dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - - printk(BIOS_DEBUG, "ACPI Updated DSDT @ %p Length %x\n", dsdt, - dsdt->length); - - ssdt = (acpi_header_t *)current; - memset(ssdt, 0, sizeof(acpi_header_t)); - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - if (ssdt->length) { - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - printk(BIOS_DEBUG, "ACPI: * SSDT @ %p Length %x\n",ssdt, - ssdt->length); - ALIGN_CURRENT; - } else { - ssdt = NULL; - printk(BIOS_DEBUG, "ACPI: * SSDT not generated.\n"); - } - - ssdt2 = (acpi_header_t *)current; - memset(ssdt2, 0, sizeof(acpi_header_t)); - acpi_create_serialio_ssdt(ssdt2); - if (ssdt2->length) { - current += ssdt2->length; - acpi_add_table(rsdp, ssdt2); - printk(BIOS_DEBUG, "ACPI: * SSDT2 @ %p Length %x\n",ssdt2, - ssdt2->length); - ALIGN_CURRENT; - } else { - ssdt2 = NULL; - printk(BIOS_DEBUG, "ACPI: * SSDT2 not generated.\n"); - } - - printk(BIOS_DEBUG, "current = %lx\n", current); - -#if IS_ENABLED(CONFIG_DUMP_ACPI_TABLES) - printk(BIOS_DEBUG, "rsdp\n"); - hexdump(BIOS_DEBUG, rsdp, sizeof(acpi_rsdp_t)); - - printk(BIOS_DEBUG, "rsdt\n"); - hexdump(BIOS_DEBUG, rsdt, sizeof(acpi_rsdt_t)); - - printk(BIOS_DEBUG, "hpet\n"); - hexdump(BIOS_DEBUG, hpet, hpet->header.length); - - printk(BIOS_DEBUG, "madt\n"); - hexdump(BIOS_DEBUG, madt, madt->header.length); - - printk(BIOS_DEBUG, "mcfg\n"); - hexdump(BIOS_DEBUG, mcfg, mcfg->header.length); - - printk(BIOS_DEBUG, "dsdt\n"); - hexdump(BIOS_DEBUG, dsdt, dsdt->length); - - if (ssdt != NULL) { - printk(BIOS_DEBUG, "ssdt\n"); - hexdump(BIOS_DEBUG, ssdt, ssdt->length); - } - - if (ssdt2 != NULL) { - printk(BIOS_DEBUG, "ssdt2\n"); - hexdump(BIOS_DEBUG, ssdt2, ssdt2->length); - } - - printk(BIOS_DEBUG, "fadt\n"); - hexdump(BIOS_DEBUG, fadt, fadt->header.length); - - printk(BIOS_DEBUG, "facs\n"); - hexdump(BIOS_DEBUG, facs, facs->length); - -#endif /* IS_ENABLED(CONFIG_DUMP_ACPI_TABLES) */ - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/intel/minnowmax/board_info.txt b/src/mainboard/intel/minnowmax/board_info.txt deleted file mode 100644 index 9dac60b..0000000 --- a/src/mainboard/intel/minnowmax/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: sbc -ROM protocol: SPI -Flashrom support: y diff --git a/src/mainboard/intel/minnowmax/cmos.layout b/src/mainboard/intel/minnowmax/cmos.layout deleted file mode 100644 index a668188..0000000 --- a/src/mainboard/intel/minnowmax/cmos.layout +++ /dev/null @@ -1,139 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -#save timestamps in pre-ram boot areas -1719 64 h 0 timestamp_value1 -1783 64 h 0 timestamp_value2 -1847 64 h 0 timestamp_value3 -1911 64 h 0 timestamp_value4 -1975 64 h 0 timestamp_value5 - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/minnowmax/devicetree.cb b/src/mainboard/intel/minnowmax/devicetree.cb deleted file mode 100644 index 4e3833e..0000000 --- a/src/mainboard/intel/minnowmax/devicetree.cb +++ /dev/null @@ -1,80 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip soc/intel/fsp_baytrail - - #### ACPI Register Settings #### - register "fadt_pm_profile" = "PM_UNSPECIFIED" - register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" - - #### FSP register settings #### - register "SataMode" = "SATA_MODE_AHCI" - register "MrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" - register "MrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" - register "MrcInitTsegSize" = "TSEG_SIZE_DEFAULT" - register "MrcInitMmioSize" = "MMIO_SIZE_DEFAULT" - register "eMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" - register "IgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" - register "ApertureSize" = "APERTURE_SIZE_DEFAULT" - register "GttSize" = "GTT_SIZE_DEFAULT" - register "LpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" - register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" - register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" - - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # 8086 0F00 - SoC router - - device pci 02.0 on end # 8086 0F31 - GFX micro HDMI - device pci 03.0 off end # 8086 0F38 - MIPI - - - device pci 10.0 off end # 8086 0F14 - EMMC Port - - device pci 11.0 off end # 8086 0F15 - SDIO Port - - device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 - device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC - device pci 14.0 on end # 8086 0F35 - USB XHCI Onboard & HSEC - device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC - device pci 17.0 off end # 8086 0F50 - MMC Port - - device pci 18.0 on end # 8086 0F40 - SIO - DMA - - device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - - device pci 18.2 off end # 8086 0F42 - I2C Port 2 (1) - (testpoints) - device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - - device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - - device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - - device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) LSEC - device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC - device pci 1a.0 on end # 8086 0F18 - TXE - - device pci 1b.0 off end # 8086 0F04 - HD Audio - - device pci 1c.0 off end # 8086 0F48 - PCIe Port 1 (0) - - device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - - device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE - device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC - device pci 1d.0 off end # 8086 0F34 - USB EHCI - - device pci 1e.0 on end # 8086 0F06 - SIO - DMA - - device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC - device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC - device pci 1e.3 on end # 8086 0F0A - HSUART 1 LSEC - device pci 1e.4 on end # 8086 0F0C - HSUART 2 LSEC - device pci 1e.5 on end # 8086 0F0E - SPI LSEC - device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector - device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC - end -end diff --git a/src/mainboard/intel/minnowmax/dsdt.asl b/src/mainboard/intel/minnowmax/dsdt.asl deleted file mode 100644 index cb2a4da..0000000 --- a/src/mainboard/intel/minnowmax/dsdt.asl +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define INCLUDE_LPE 1 -#define INCLUDE_SCC 1 -#define INCLUDE_EHCI 1 -#define INCLUDE_XHCI 1 -#define INCLUDE_LPSS 1 - - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include <soc/intel/fsp_baytrail/acpi/platform.asl> - - // global NVS and variables - #include <soc/intel/fsp_baytrail/acpi/globalnvs.asl> - - #include <soc/intel/fsp_baytrail/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <soc/intel/fsp_baytrail/acpi/southcluster.asl> - } - } - - /* Chipset specific sleep states */ - #include <soc/intel/fsp_baytrail/acpi/sleepstates.asl> - - #include "acpi/mainboard.asl" -} diff --git a/src/mainboard/intel/minnowmax/fadt.c b/src/mainboard/intel/minnowmax/fadt.c deleted file mode 100644 index 91995f0..0000000 --- a/src/mainboard/intel/minnowmax/fadt.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/acpi.h> -#include <baytrail/acpi.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - acpi_fill_in_fadt(fadt,facs,dsdt); - - /* Platform specific customizations go here */ - - header->checksum = 0; - header->checksum = - acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/intel/minnowmax/gpio.c b/src/mainboard/intel/minnowmax/gpio.c deleted file mode 100644 index 9b735cf..0000000 --- a/src/mainboard/intel/minnowmax/gpio.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdlib.h> -#include <baytrail/gpio.h> -#include "irqroute.h" - -/* - * For multiplexed functions, look in EDS: - * 10.3 Ball Name and Function by Location - * - * The pads list is in the BWG_VOL2 Rev1p2: - * Note that Pad # is not the same as GPIO# - * 37 GPIO Handling: - * Table 37-1. SCORE Pads List - * Table 37-2. SSUSORE Pads List - */ - -/* NCORE GPIOs */ -static const struct soc_gpio_map gpncore_gpio_map[] = { - GPIO_FUNC2, /* GPIO_S0_NC[00] - HDMI_HPD */ - GPIO_FUNC2, /* GPIO_S0_NC[01] - HDMI_DDCDAT */ - GPIO_FUNC2, /* GPIO_S0_NC[02] - HDMI_DDCCLK */ - GPIO_NC, /* GPIO_S0_NC[03] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[04] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[05] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[06] - No Connect */ - GPIO_FUNC2, /* GPIO_S0_NC[07] - DDI1_DDCDAT */ - GPIO_NC, /* GPIO_S0_NC[08] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[09] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[10] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[11] - No Connect */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_NC[12] - TP15 */ - GPIO_NC, /* GPIO_S0_NC[13] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[14] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[15] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[16] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[17] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[18] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[19] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[20] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[21] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[22] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[23] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[24] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[25] - No Connect */ - GPIO_NC, /* GPIO_S0_NC[26] - No Connect */ - GPIO_END -}; - -/* SCORE GPIOs (GPIO_S0_SC_XX)*/ -static const struct soc_gpio_map gpscore_gpio_map[] = { - GPIO_FUNC1, /* GPIO_S0_SC[000] - SATA_GP0 */ - GPIO_FUNC1, /* GPIO_S0_SC[001] - SATA_GP1 */ - GPIO_FUNC1, /* GPIO_S0_SC[002] - SATA_LED_B */ - GPIO_FUNC1, /* GPIO_S0_SC[003] - PCIE_CLKREQ_0 */ - GPIO_FUNC1, /* GPIO_S0_SC[004] - PCIE_CLKREQ_1 */ - GPIO_FUNC1, /* GPIO_S0_SC[005] - PCIE_CLKREQ_2 */ - GPIO_FUNC1, /* GPIO_S0_SC[006] - PCIE_CLKREQ_3 */ - GPIO_FUNC2, /* GPIO_S0_SC[007] - SD3_WP */ - GPIO_NC, /* GPIO_S0_SC[008] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[009] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[010] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[011] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[012] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[013] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[014] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[015] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[016] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[017] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[018] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[019] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[020] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[021] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[022] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[023] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[024] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[025] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[026] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[027] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[028] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[029] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[030] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[031] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[032] - No Connect */ - GPIO_FUNC1, /* GPIO_S0_SC[033] - SD3_CLK */ - GPIO_FUNC1, /* GPIO_S0_SC[034] - SD3_D0 */ - GPIO_FUNC1, /* GPIO_S0_SC[035] - SD3_D1 */ - GPIO_FUNC1, /* GPIO_S0_SC[036] - SD3_D2 */ - GPIO_FUNC1, /* GPIO_S0_SC[037] - SD3_D3 */ - GPIO_FUNC1, /* GPIO_S0_SC[038] - SD3_CD# */ - GPIO_FUNC1, /* GPIO_S0_SC[039] - SD3_CMD */ - GPIO_FUNC1, /* GPIO_S0_SC[040] - TP12 (SD3_1P8EN) */ - GPIO_FUNC1, /* GPIO_S0_SC[041] - TP11 (/SD3_PWREN) */ - GPIO_NC, /* GPIO_S0_SC[042] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[043] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[044] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[045] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[046] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[047] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[048] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[049] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[050] - No Connect */ - GPIO_FUNC1, /* GPIO_S0_SC[051] - PCU_SMB_DATA */ - GPIO_FUNC1, /* GPIO_S0_SC[052] - PCU_SMB_CLK */ - GPIO_FUNC1, /* GPIO_S0_SC[053] - PCU_SMB_ALERT */ - GPIO_FUNC1, /* GPIO_S0_SC[054] - ILB_8254_SPKR */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_SC[055] - TP8 (GPIO_S0_SC_55) */ - GPIO_FUNC0, /* GPIO_S0_SC[056] - GPIO_S0_SC_56 */ - GPIO_FUNC1, /* GPIO_S0_SC[057] - PCU_UART3_TXD */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S0_SC[058] - TP9 (GPIO_S0_SC_58) */ - GPIO_FUNC0, /* GPIO_S0_SC[059] - HDMI_DCDC_ENB */ - GPIO_FUNC0, /* GPIO_S0_SC[060] - HDMI_LDSW_ENB */ - GPIO_FUNC1, /* GPIO_S0_SC[061] - PCU_UART3_RXD */ - GPIO_FUNC1, /* GPIO_S0_SC[062] - LPE_I2S_CLK */ - GPIO_FUNC1, /* GPIO_S0_SC[063] - LPE_I2S_FRM */ - GPIO_FUNC1, /* GPIO_S0_SC[064] - LPE_I2S_DATIN */ - GPIO_FUNC1, /* GPIO_S0_SC[065] - LPE_I2S_DATOUT */ - GPIO_FUNC1, /* GPIO_S0_SC[066] - SOC_SIO_SPI_CS1 */ - GPIO_FUNC1, /* GPIO_S0_SC[067] - SOC_SIO_SPI_MISO */ - GPIO_FUNC1, /* GPIO_S0_SC[068] - SOC_SIO_SPI_MOSI */ - GPIO_FUNC1, /* GPIO_S0_SC[069] - SOC_SIO_SPI_CLK */ - GPIO_FUNC1, /* GPIO_S0_SC[070] - SIO_UART1_RXD */ - GPIO_FUNC1, /* GPIO_S0_SC[071] - SIO_UART1_TXD */ - GPIO_FUNC1, /* GPIO_S0_SC[072] - SIO_UART1_RTSB */ - GPIO_FUNC1, /* GPIO_S0_SC[073] - SIO_UART1_CTSB */ - GPIO_FUNC1, /* GPIO_S0_SC[074] - SIO_UART2_RXD */ - GPIO_FUNC1, /* GPIO_S0_SC[075] - SIO_UART2_TXD */ - GPIO_NC, /* GPIO_S0_SC[076] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[077] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[078] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[079] - No Connect */ - GPIO_FUNC1, /* GPIO_S0_SC[080] - TP6 (SIO_I2C1_SDA) */ - GPIO_FUNC1, /* GPIO_S0_SC[081] - TP5 (SIO_I2C1_SCL) */ - GPIO_NC, /* GPIO_S0_SC[082] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[083] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[084] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[085] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[086] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[087] - No Connect */ - GPIO_FUNC1, /* GPIO_S0_SC[088] - LSS_I2C_SDA */ - GPIO_FUNC1, /* GPIO_S0_SC[089] - LSS_I2C_SCL */ - GPIO_FUNC1, /* GPIO_S0_SC[090] - EXP_I2C_SDA */ - GPIO_FUNC1, /* GPIO_S0_SC[091] - EXP_I2C_SCL */ - GPIO_FUNC(1, PULL_UP, 20K), /* GPIO_S0_SC[092] - TP13 */ - GPIO_FUNC(1, PULL_UP, 20K), /* GPIO_S0_SC[093] - TP16 */ - GPIO_FUNC1, /* GPIO_S0_SC[094] - SOC_PWM0 */ - GPIO_FUNC1, /* GPIO_S0_SC[095] - SOC_PWM1 */ - GPIO_NC, /* GPIO_S0_SC[096] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[097] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[098] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[099] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[100] - No Connect */ - GPIO_NC, /* GPIO_S0_SC[101] - No Connect */ - GPIO_END -}; - -/* SSUS GPIOs (GPIO_S5) */ -static const struct soc_gpio_map gpssus_gpio_map[] = { - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[00] - SOC_GPIO_S5_0 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[01] - SOC_GPIO_S5_1 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[02] - SOC_GPIO_S5_2 */ - GPIO_FUNC6, /* GPIO_S5[03] - mPCIE_WAKEB */ - GPIO_NC, /* GPIO_S5[04] - No Connect */ - GPIO_INPUT, /* GPIO_S5[05] - BOM_OP1 */ - GPIO_INPUT, /* GPIO_S5[06] - BOM_OP2 */ - GPIO_INPUT, /* GPIO_S5[07] - BOM_OP3 */ - GPIO_OUT_HIGH, /* GPIO_S5[08] - SOC_USB_HOST_EN0 */ - GPIO_OUT_HIGH, /* GPIO_S5[09] - SOC_USB_HOST_EN1 */ - GPIO_OUT_HIGH, /* GPIO_S5[10] - GPIO_S5_10_UNLOCK */ - GPIO_FUNC0, /* GPIO_S5[11] - SUSPWRDNACK (TP14) */ - GPIO_FUNC0, /* GPIO_S5[12] - PMC_SUSCLK0 */ - GPIO_FUNC1, /* GPIO_S5[13] - PMC_SLP_S0IX (TP10) */ - GPIO_FUNC1, /* GPIO_S5[14] - GPIO_S514_J20 */ - GPIO_FUNC0, /* GPIO_S5[15] - PMC_PCIE_WAKE_R */ - GPIO_FUNC0, /* GPIO_S5[16] - PMC_PWRBTN */ - GPIO_NC1, /* GPIO_S5[17] - No Connect */ - GPIO_FUNC1, /* GPIO_S5[18] - LPCPD_L (TP7) */ - GPIO_FUNC0, /* GPIO_S5[19] - SOC_USB_HOST_OC0 */ - GPIO_FUNC0, /* GPIO_S5[20] - SOC_USB_HOST_OC1 */ - GPIO_FUNC0, /* GPIO_S5[21] - SOC_SPI_CS1B */ - GPIO_NC, /* GPIO_S5[22] - No Connect */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[23] - XDP_H_OBSDATA_A0 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[24] - XDP_H_OBSDATA_A1 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[25] - XDP_H_OBSDATA_A2 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[26] - XDP_H_OBSDATA_A3 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[27] - EXP_GPIO1 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[28] - EXP_GPIO2 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[29] - EXP_GPIO3 */ - GPIO_FUNC(0, PULL_UP, 20K), /* GPIO_S5[30] - EXP_GPIO4 */ - GPIO_NC, /* GPIO_S5[31] - No Connect */ - GPIO_NC, /* GPIO_S5[32] - No Connect */ - GPIO_NC, /* GPIO_S5[33] - No Connect */ - GPIO_NC, /* GPIO_S5[34] - No Connect */ - GPIO_NC, /* GPIO_S5[35] - No Connect */ - GPIO_NC, /* GPIO_S5[36] - No Connect */ - GPIO_NC, /* GPIO_S5[37] - No Connect */ - GPIO_NC, /* GPIO_S5[38] - No Connect */ - GPIO_NC, /* GPIO_S5[39] - No Connect */ - GPIO_NC, /* GPIO_S5[40] - No Connect */ - GPIO_NC, /* GPIO_S5[41] - No Connect */ - GPIO_NC, /* GPIO_S5[42] - No Connect */ - GPIO_NC, /* GPIO_S5[43] - No Connect */ - GPIO_END -}; - -static struct soc_gpio_config gpio_config = { - .ncore = gpncore_gpio_map, - .score = gpscore_gpio_map, - .ssus = gpssus_gpio_map, - .core_dirq = NULL, - .sus_dirq = NULL, -}; - -struct soc_gpio_config* mainboard_get_gpios(void) -{ - return &gpio_config; -} diff --git a/src/mainboard/intel/minnowmax/irqroute.c b/src/mainboard/intel/minnowmax/irqroute.c deleted file mode 100644 index 552be8f..0000000 --- a/src/mainboard/intel/minnowmax/irqroute.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "irqroute.h" - -DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/minnowmax/irqroute.h b/src/mainboard/intel/minnowmax/irqroute.h deleted file mode 100644 index 99c3776..0000000 --- a/src/mainboard/intel/minnowmax/irqroute.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef IRQROUTE_H -#define IRQROUTE_H - -#include <soc/intel/fsp_baytrail/baytrail/irq.h> -#include <soc/intel/fsp_baytrail/baytrail/pci_devs.h> - -/* - *IR02h GFX INT(A) - PIRQ A - *IR10h EMMC INT(ABCD) - PIRQ DEFG - *IR11h SDIO INT(A) - PIRQ B - *IR12h SD INT(A) - PIRQ C - *IR13h SATA INT(A) - PIRQ D - *IR14h XHCI INT(A) - PIRQ E - *IR15h LP Audio INT(A) - PIRQ F - *IR17h MMC INT(A) - PIRQ F - *IR18h SIO INT(ABCD) - PIRQ BADC - *IR1Ah TXE INT(A) - PIRQ F - *IR1Bh HD Audio INT(A) - PIRQ G - *IR1Ch PCIe INT(ABCD) - PIRQ EFGH - *IR1Dh EHCI INT(A) - PIRQ D - *IR1Eh SIO INT(ABCD) - PIRQ BDEF - *IR1Fh LPC INT(ABCD) - PIRQ HGBC - */ -#define PCI_DEV_PIRQ_ROUTES \ - PCI_DEV_PIRQ_ROUTE(GFX_DEV, A, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(EMMC_DEV, D, E, F, G), \ - PCI_DEV_PIRQ_ROUTE(SDIO_DEV, B, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SD_DEV, C, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SATA_DEV, D, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(XHCI_DEV, E, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(LPE_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(MMC45_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SIO1_DEV, B, A, D, C), \ - PCI_DEV_PIRQ_ROUTE(TXE_DEV, F, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(HDA_DEV, G, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(PCIE_DEV, E, F, G, H), \ - PCI_DEV_PIRQ_ROUTE(EHCI_DEV, D, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SIO2_DEV, B, D, E, F), \ - PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) - -/* - * Route each PIRQ[A-H] to a PIC IRQ[0-15] - * Reserved: 0, 1, 2, 8, 13 - * PS2 keyboard: 12 - * ACPI/SCI: 9 - * Floppy: 6 - */ -#define PIRQ_PIC_ROUTES \ - PIRQ_PIC(A, 4), \ - PIRQ_PIC(B, 5), \ - PIRQ_PIC(C, 7), \ - PIRQ_PIC(D, 10), \ - PIRQ_PIC(E, 11), \ - PIRQ_PIC(F, 12), \ - PIRQ_PIC(G, 14), \ - PIRQ_PIC(H, 15) - -#endif /* IRQROUTE_H */ diff --git a/src/mainboard/intel/minnowmax/mainboard.c b/src/mainboard/intel/minnowmax/mainboard.c deleted file mode 100644 index 3da1e23..0000000 --- a/src/mainboard/intel/minnowmax/mainboard.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> - -/* - * mainboard_enable is executed as first thing after enumerate_buses(). - * This is the earliest point to add customization. - */ -static void mainboard_enable(device_t dev) -{ -} - -/* - * mainboard_final is executed as one of the last items before loading the - * payload. - * - * This is the latest point to add customization. - */ -static void mainboard_final(void *chip_info) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, - .final = mainboard_final, -}; diff --git a/src/mainboard/intel/minnowmax/romstage.c b/src/mainboard/intel/minnowmax/romstage.c deleted file mode 100644 index 460c668..0000000 --- a/src/mainboard/intel/minnowmax/romstage.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <baytrail/romstage.h> -#include <drivers/intel/fsp/fsp_util.h> - -/** - * /brief mainboard call for setup that needs to be done before fsp init - * - */ -void early_mainboard_romstage_entry() -{ - -} - -/** - * Get function disables - most of these will be done automatically - * @param fd_mask - * @param fd2_mask - */ -void get_func_disables(uint32_t *fd_mask, uint32_t *fd2_mask) -{ - -} - -/** - * /brief mainboard call for setup that needs to be done after fsp init - * - */ -void late_mainboard_romstage_entry() -{ - -} - -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - UPD_DATA_REGION *UpdData = FspRtBuffer->Common.UpdDataRgnPtr; - - /* Disable 2nd DIMM */ - UpdData->PcdMrcInitSPDAddr2 = 0x00; - - return; -} diff --git a/src/mainboard/intel/mohon_peak_crb/Kconfig b/src/mainboard/intel/mohon_peak_crb/Kconfig new file mode 100644 index 0000000..6940a13 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/Kconfig @@ -0,0 +1,107 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if BOARD_INTEL_MOHON_PEAK_CRB + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_FSP_RANGELEY + select SOUTHBRIDGE_INTEL_FSP_RANGELEY + select BOARD_ROMSIZE_KB_2048 #actual chip is 8MB + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select MMCONF_SUPPORT + select POST_IO + select DEFAULT_POST_DEVICE_LPC + select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT + +config MAINBOARD_DIR + string + default intel/mohon_peak_crb + +config INCLUDE_ME + bool + default n + +config LOCK_MANAGEMENT_ENGINE + bool + default n + +config MAINBOARD_PART_NUMBER + string + default "Mohon Peak CRB" + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config CACHE_ROM_SIZE_OVERRIDE + hex + default 0x800000 + +config FSP_FILE + string + default "../intel/fsp/rangeley/FvFsp.bin" + +config CBFS_SIZE + hex + default 0x00200000 + +config DRIVERS_PS2_KEYBOARD + bool + default n + +config CONSOLE_POST + bool + default y + +config ENABLE_FSP_FAST_BOOT + bool + depends on HAVE_FSP_BIN + default y + +config VIRTUAL_ROM_SIZE + hex + depends on ENABLE_FSP_FAST_BOOT + default 0x400000 + +config FSP_PACKAGE_DEFAULT + bool "Configure defaults for the Intel FSP package" + default n + +config UART_FOR_CONSOLE + int + default 1 + help + The Mohon Peak board uses COM2 (2f8) for the serial console. + +config SEABIOS_MALLOC_UPPERMEMORY + bool + default n + help + The Avoton/Rangeley chip does not allow devices to write into the 0xe000 + segment. This means that USB/SATA devices will not work in SeaBIOS unless + we put the SeaBIOS buffer area down in the 0x9000 segment. + +endif # BOARD_INTEL_MOHON_PEAK_CRB diff --git a/src/mainboard/intel/mohon_peak_crb/Makefile.inc b/src/mainboard/intel/mohon_peak_crb/Makefile.inc new file mode 100644 index 0000000..8f999cc --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2014 Sage Electronics Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += irqroute.c diff --git a/src/mainboard/intel/mohon_peak_crb/acpi/ec.asl b/src/mainboard/intel/mohon_peak_crb/acpi/ec.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/mohon_peak_crb/acpi/mainboard.asl b/src/mainboard/intel/mohon_peak_crb/acpi/mainboard.asl new file mode 100644 index 0000000..6b15331 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake + Name(_PRW, Package(){0x1d, 0x05}) +} diff --git a/src/mainboard/intel/mohon_peak_crb/acpi/platform.asl b/src/mainboard/intel/mohon_peak_crb/acpi/platform.asl new file mode 100644 index 0000000..aab7603 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/acpi/platform.asl @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} + diff --git a/src/mainboard/intel/mohon_peak_crb/acpi/superio.asl b/src/mainboard/intel/mohon_peak_crb/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/mohon_peak_crb/acpi/thermal.asl b/src/mainboard/intel/mohon_peak_crb/acpi/thermal.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/intel/mohon_peak_crb/acpi_tables.c b/src/mainboard/intel/mohon_peak_crb/acpi_tables.c new file mode 100644 index 0000000..0349075 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/acpi_tables.c @@ -0,0 +1,261 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <southbridge/intel/fsp_rangeley/nvs.h> +#include <northbridge/intel/fsp_rangeley/northbridge.h> + +extern const unsigned char AmlCode[]; +#if CONFIG_HAVE_ACPI_SLIC +unsigned long acpi_create_slic(unsigned long current); +#endif + +static global_nvs_t *gnvs_; + +static void acpi_create_gnvs(global_nvs_t *gnvs) +{ + gnvs_ = gnvs; + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* + * Enable Front USB ports in S5 by default + * to be consistent with back port behavior + */ + gnvs->s5u0 = 1; + gnvs->s5u1 = 1; + + /* CBMEM TOC */ + gnvs->cmem = (u32)get_cbmem_toc(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, + const char *oem_table_id) +{ + u32 lens, bmbound; + char pscope[] = "\_SB.PCI0"; + + bmbound = sideband_read(B_UNIT, BMBOUND); + lens = acpigen_write_scope(pscope); + lens += acpigen_write_name_dword("BMBD", bmbound); + generate_cpu_entries(); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +void smm_setup_structures(void *gnvs, void *tcg, void *smi1); + +#define ALIGN_CURRENT current = (ALIGN(current, 16)) +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + int i; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_xsdt_t *xsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; +#if CONFIG_HAVE_ACPI_SLIC + acpi_header_t *slic; +#endif + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + current = start; + + /* Align ACPI tables to 16byte */ + ALIGN_CURRENT; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + ALIGN_CURRENT; + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + ALIGN_CURRENT; + xsdt = (acpi_xsdt_t *) current; + current += sizeof(acpi_xsdt_t); + ALIGN_CURRENT; + + /* clear all table memory */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, xsdt); + acpi_write_rsdt(rsdt); + acpi_write_xsdt(xsdt); + + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + ALIGN_CURRENT; + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + ALIGN_CURRENT; + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + ALIGN_CURRENT; + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + ALIGN_CURRENT; + acpi_add_table(rsdp, mcfg); + + /* Pack GNVS into the ACPI table area */ + for (i=0; i < dsdt->length; i++) { + if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { + printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " + "DSDT at offset 0x%04x -> 0x%08lx\n", i, current); + *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes + acpi_save_gnvs(current); + break; + } + } + + /* And fill it */ + acpi_create_gnvs((global_nvs_t *)current); + + /* And tell SMI about it */ +#if CONFIG_HAVE_SMI_HANDLER + smm_setup_structures((void *)current, NULL, NULL); +#endif + + current += sizeof(global_nvs_t); + ALIGN_CURRENT; + + /* We patched up the DSDT, so we need to recalculate the checksum */ + dsdt->checksum = 0; + dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); + + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + +#if CONFIG_HAVE_ACPI_SLIC + printk(BIOS_DEBUG, "ACPI: * SLIC\n"); + slic = (acpi_header_t *)current; + current += acpi_create_slic(current); + ALIGN_CURRENT; + acpi_add_table(rsdp, slic); +#endif + + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + ALIGN_CURRENT; + + printk(BIOS_DEBUG, "current = %lx\n", current); + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/intel/mohon_peak_crb/board_info.txt b/src/mainboard/intel/mohon_peak_crb/board_info.txt new file mode 100644 index 0000000..815d6f7 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/board_info.txt @@ -0,0 +1,3 @@ +Category: eval +ROM protocol: SPI +Flashrom support: y diff --git a/src/mainboard/intel/mohon_peak_crb/cmos.layout b/src/mainboard/intel/mohon_peak_crb/cmos.layout new file mode 100644 index 0000000..16ae12f --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/cmos.layout @@ -0,0 +1,141 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +#save timestamps in pre-ram boot areas +1719 64 h 0 timestamp_value1 +1783 64 h 0 timestamp_value2 +1847 64 h 0 timestamp_value3 +1911 64 h 0 timestamp_value4 +1975 64 h 0 timestamp_value5 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 + + diff --git a/src/mainboard/intel/mohon_peak_crb/devicetree.cb b/src/mainboard/intel/mohon_peak_crb/devicetree.cb new file mode 100644 index 0000000..ee688b7 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/devicetree.cb @@ -0,0 +1,68 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2013 Sage Electronic Engineering, LLC. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/intel/fsp_rangeley + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/fsp_model_406dx + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) + register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 1.0 on end # PCIe Port #1 + device pci 2.0 on end # PCIe Port #2 + device pci 3.0 on end # PCIe Port #3 + device pci 4.0 on end # PCIe Port #4 + chip southbridge/intel/fsp_rangeley # Rangeley SB + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x0f" + + register "fadt_pm_profile" = "PM_DESKTOP" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + + device pci 0b.0 on end # IQIA + device pci 0e.0 on end # RAS + device pci 13.0 on end # SMBus 1 + device pci 14.0 on end # GbE 0 + device pci 14.1 on end # GbE 1 + device pci 14.2 on end # GbE 2 + device pci 14.3 on end # GbE 3 + device pci 16.0 on end # USB EHCI + device pci 17.0 on end # SATA 2.0 + device pci 18.0 on end # SATA 3.0 + device pci 1f.0 on end # LPC bridge + device pci 1f.3 on end # SMBus 0 + end + end +end diff --git a/src/mainboard/intel/mohon_peak_crb/dsdt.asl b/src/mainboard/intel/mohon_peak_crb/dsdt.asl new file mode 100644 index 0000000..15e6dff --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/dsdt.asl @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Include debug methods + #include <arch/x86/acpi/debug.asl> + + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/fsp_rangeley/acpi/globalnvs.asl> + + #include "acpi/thermal.asl" + + #include <cpu/intel/fsp_model_406dx/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/fsp_rangeley/acpi/rangeley.asl> + #include <southbridge/intel/fsp_rangeley/acpi/soc.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/fsp_rangeley/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/mohon_peak_crb/fadt.c b/src/mainboard/intel/mohon_peak_crb/fadt.c new file mode 100644 index 0000000..0aadac6 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/fadt.c @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <southbridge/intel/fsp_rangeley/soc.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_fill_in_fadt(fadt,facs,dsdt); + +#define PLATFORM_HAS_FADT_CUSTOMIZATIONS 0 + + + /* + * Platform specific customizations go here. + * Update the #define above if customizations are added. + */ + + +#if PLATFORM_HAS_FADT_CUSTOMIZATIONS + header->checksum = 0; + header->checksum = + acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); +#endif + +} diff --git a/src/mainboard/intel/mohon_peak_crb/gpio.h b/src/mainboard/intel/mohon_peak_crb/gpio.h new file mode 100644 index 0000000..b929c68 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/gpio.h @@ -0,0 +1,178 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MOHONPEAK_GPIO_H +#define MOHONPEAK_GPIO_H + +#include <southbridge/intel/fsp_rangeley/gpio.h> + +/* Core GPIO */ +const struct soc_gpio soc_gpio_mode = { + .gpio15 = GPIO_MODE_GPIO, /* Board ID GPIO */ + .gpio17 = GPIO_MODE_GPIO, /* Board ID GPIO */ +}; + +const struct soc_gpio soc_gpio_direction = { + .gpio15 = GPIO_DIR_INPUT, /* Board ID GPIO */ + .gpio17 = GPIO_DIR_INPUT, /* Board ID GPIO */ +}; + +const struct soc_gpio soc_gpio_level = { +}; + +const struct soc_gpio soc_gpio_tpe = { +}; + +const struct soc_gpio soc_gpio_tne = { +}; + +const struct soc_gpio soc_gpio_ts = { +}; + +/* Keep the CFIO struct in register order, not gpio order. */ +const struct soc_cfio soc_cfio_core[] = { + { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO gpios_28 */ + { 0x8000, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_27 */ + { 0x8500, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_26 */ + { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_21 */ + { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_22 */ + { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_23 */ + { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO gpios_25 */ + { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_24 */ + { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_19 */ + { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_20 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_18 */ + { 0x04a9, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_17 */ + { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_7 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_4 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_5 */ + { 0xc528, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_6 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_1 */ + { 0xc028, 0x20002, 0x0004, 0x040c }, /* CFIO gpios_2 */ + { 0xc028, 0x20002, 0x0004, 0x040c }, /* CFIO gpios_3 */ + { 0xc528, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_0 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_10 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_13 */ + { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_14 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_11 */ + { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_8 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_9 */ + { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_12 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_29 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_30 */ + { 0x04a9, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_15 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_16 */ +}; + +/* SUS GPIO */ +const struct soc_gpio soc_gpio_sus_mode = { + .gpio2 = GPIO_MODE_GPIO, +}; + +const struct soc_gpio soc_gpio_sus_direction = { + .gpio2 = GPIO_DIR_INPUT, +}; + +const struct soc_gpio soc_gpio_sus_level = { +}; + +const struct soc_gpio soc_gpio_sus_tpe = { +}; + +const struct soc_gpio soc_gpio_sus_tne = { +}; + +const struct soc_gpio soc_gpio_sus_ts = { +}; + +const struct soc_gpio soc_gpio_sus_we = { +}; + + +/* Keep the CFIO struct in register order, not gpio order. */ +const struct soc_cfio soc_cfio_sus[] = { + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_21 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_20 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_19 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_22 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_17 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_18 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_14 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_13 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_15 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_16 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_25 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_24 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_26 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_27 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_23 */ + { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_2 */ + { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_1 */ + { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_7 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_3 */ + { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_0 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_12 */ + { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_6 */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_10 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_9 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_8 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_4 */ + { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_11 */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ + { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_5 */ +}; + +const struct soc_gpio_map gpio_map = { + .core = { + .mode = &soc_gpio_mode, + .direction = &soc_gpio_direction, + .level = &soc_gpio_level, + .tpe = &soc_gpio_tpe, + .tne = &soc_gpio_tne, + .ts = &soc_gpio_ts, + .cfio_init = &soc_cfio_core[0], + .cfio_entrynum = sizeof(soc_cfio_core) / sizeof(struct soc_cfio), + }, + .sus = { + .mode = &soc_gpio_sus_mode, + .direction = &soc_gpio_sus_direction, + .level = &soc_gpio_sus_level, + .tpe = &soc_gpio_sus_tpe, + .tne = &soc_gpio_sus_tne, + .ts = &soc_gpio_sus_ts, + .we = &soc_gpio_sus_we, + .cfio_init = &soc_cfio_sus[0], + .cfio_entrynum = sizeof(soc_cfio_sus) / sizeof(struct soc_cfio), + }, +}; + +#endif /* MOHONPEAK_GPIO_H */ diff --git a/src/mainboard/intel/mohon_peak_crb/irq_tables.c b/src/mainboard/intel/mohon_peak_crb/irq_tables.c new file mode 100755 index 0000000..eeb0dc6 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/irq_tables.c @@ -0,0 +1,68 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +#define PIRQA 0x08 +#define PIRQB 0x09 +#define PIRQC 0x0a +#define PIRQD 0x0b +#define PIRQE 0x0c +#define PIRQF 0x0d +#define PIRQG 0x0e +#define PIRQH 0x0f + +#define PCI_IRQS 0xDCF0 + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total 18 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x0F1C, /* Device */ + 0, /* miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x86, /* u8 checksum. */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01<<3)|0x0, {{PIRQA, PCI_IRQS}, {PIRQB, PCI_IRQS}, {PIRQC, PCI_IRQS}, {PIRQD, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 1: INTA-PIRQA, INTB-PIRQB, INTC-PIRQC, INTD-PIRQD + {0x00,(0x02<<3)|0x0, {{PIRQA, PCI_IRQS}, {PIRQB, PCI_IRQS}, {PIRQC, PCI_IRQS}, {PIRQD, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 2: INTA-PIRQA, INTB-PIRQB, INTC-PIRQC, INTD-PIRQD + {0x00,(0x03<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 3: INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH + {0x00,(0x04<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 4: INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH + {0x00,(0x0b<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // IQAT INTA-PIRQA + {0x00,(0x0f<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // RCEC INTA-PIRQA + {0x00,(0x13<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SMBUS #1 INTA-PIRQA + {0x00,(0x14<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // GbE, INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH + {0x00,(0x16<<3)|0x0, {{PIRQH, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // EHCI INTA-PIRQH + {0x00,(0x17<<3)|0x0, {{PIRQD, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SATA2 INTA-PIRQD + {0x00,(0x18<<3)|0x0, {{PIRQD, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SATA3 INTA-PIRQD + {0x00,(0x1f<<3)|0x0, {{0x00, 0x0000}, {PIRQC, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC/SMBUS #0 INTB - PIRQC + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} + diff --git a/src/mainboard/intel/mohon_peak_crb/irqroute.c b/src/mainboard/intel/mohon_peak_crb/irqroute.c new file mode 100644 index 0000000..ee8cbb9 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/irqroute.c @@ -0,0 +1,23 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronics Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "irqroute.h" + +DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/mohon_peak_crb/irqroute.h b/src/mainboard/intel/mohon_peak_crb/irqroute.h new file mode 100644 index 0000000..cbd320a --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/irqroute.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2014 Sage Electronics Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef IRQROUTE_H +#define IRQROUTE_H + +#include <southbridge/intel/fsp_rangeley/irq.h> +#include <southbridge/intel/fsp_rangeley/pci_devs.h> + +/* + * IR01h PCIe INT(ABCD) - PIRQ ABCD + * IR02h PCIe INT(ABCD) - PIRQ ABCD + * IR03h PCIe INT(ABCD) - PIRQ ABCD + * IR04h PCIe INT(ABCD) - PIRQ ABCD + * IR0Bh IQIA INT(ABCD) - PIRQ EFGH + * IR0Eh RAS INT(A) - PIRQ A + * IR13h SMBUS1 INT(A) - PIRQ B + * IR15h GBE INT(A) - PIRQ CDEF + * IR1Dh EHCI INT(A) - PIRQ G + * IR13h SATA2.0 INT(A) - PIRQ H + * IR13h SATA3.0 INT(A) - PIRQ A + * IR1Fh LPC INT(ABCD) - PIRQ HGBC + */ +#define PCI_DEV_PIRQ_ROUTES \ + PCI_DEV_PIRQ_ROUTE(PCIE_PORT1_DEV, A, B, C, D), \ + PCI_DEV_PIRQ_ROUTE(PCIE_PORT2_DEV, D, C, B, A), \ + PCI_DEV_PIRQ_ROUTE(PCIE_PORT3_DEV, E, F, G, H), \ + PCI_DEV_PIRQ_ROUTE(PCIE_PORT4_DEV, H, G, F, E), \ + PCI_DEV_PIRQ_ROUTE(IQAT_DEV, E, F, G, H), \ + PCI_DEV_PIRQ_ROUTE(HOST_BRIDGE_DEV, H, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(RCEC_DEV, A, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SMBUS1_DEV, B, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(GBE_DEV, C, D, E, F), \ + PCI_DEV_PIRQ_ROUTE(USB2_DEV, G, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SATA2_DEV, H, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(SATA3_DEV, A, A, A, A), \ + PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) + +/* + * Route each PIRQ[A-H] to a PIC IRQ[0-15] + * Reserved: 0, 1, 2, 8, 13 + * PS2 keyboard: 12 + * ACPI/SCI: 9 + * Floppy: 6 + */ +#define PIRQ_PIC_ROUTES \ + PIRQ_PIC(A, 10), \ + PIRQ_PIC(B, 11), \ + PIRQ_PIC(C, 10), \ + PIRQ_PIC(D, 11), \ + PIRQ_PIC(E, 14), \ + PIRQ_PIC(F, 15), \ + PIRQ_PIC(G, 14), \ + PIRQ_PIC(H, 15) + +#endif /* IRQROUTE_H */ \ No newline at end of file diff --git a/src/mainboard/intel/mohon_peak_crb/mainboard.c b/src/mainboard/intel/mohon_peak_crb/mainboard.c new file mode 100644 index 0000000..7559fc2 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/mainboard.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> + +/* + * mainboard_enable is executed as first thing after enumerate_buses(). + * This is the earliest point to add customization. + */ +static void mainboard_enable(device_t dev) +{ + +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; + diff --git a/src/mainboard/intel/mohon_peak_crb/romstage.c b/src/mainboard/intel/mohon_peak_crb/romstage.c new file mode 100644 index 0000000..b1fb995 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/romstage.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <drivers/intel/fsp/fsp_util.h> +#include <southbridge/intel/fsp_rangeley/soc.h> +#include <southbridge/intel/fsp_rangeley/gpio.h> +#include <southbridge/intel/fsp_rangeley/romstage.h> +#include <arch/cpu.h> +#include "gpio.h" + +static void interrupt_routing_config(void) +{ + u32 ilb_base = pci_read_config32(SOC_LPC_DEV, IBASE) & ~0xf; + + /* + * Initialize Interrupt Routings for each device in ilb_base_address. + * IR01 map to PCIe device 0x01 ... IR31 to device 0x1F. + * PIRQ_A maps to IRQ 16 ... PIRQ_H maps tp IRQ 23. + * This should match devicetree and the ACPI IRQ routing/ + */ + write32(ilb_base + ILB_ACTL, 0x0000); /* ACTL bit 2:0 SCIS IRQ9 */ + write16(ilb_base + ILB_IR01, 0x3210); /* IR01h IR(ABCD) - PIRQ(ABCD) */ + write16(ilb_base + ILB_IR02, 0x3210); /* IR02h IR(ABCD) - PIRQ(ABCD) */ + write16(ilb_base + ILB_IR03, 0x7654); /* IR03h IR(ABCD) - PIRQ(EFGH) */ + write16(ilb_base + ILB_IR04, 0x7654); /* IR04h IR(ABCD) - PIRQ(EFGH) */ + write16(ilb_base + ILB_IR20, 0x7654); /* IR14h IR(ABCD) - PIRQ(EFGH) */ + write16(ilb_base + ILB_IR22, 0x0007); /* IR16h IR(A) - PIRQ(H) */ + write16(ilb_base + ILB_IR23, 0x0003); /* IR17h IR(A) - PIRQ(D) */ + write16(ilb_base + ILB_IR24, 0x0003); /* IR18h IR(A) - PIRQ(D) */ + write16(ilb_base + ILB_IR31, 0x0020); /* IR1Fh IR(B) - PIRQ(C) */ +} + +/** + * /brief mainboard call for setup that needs to be done before fsp init + * + */ +void early_mainboard_romstage_entry(void) +{ + setup_soc_gpios(&gpio_map); +} + +/** + * /brief mainboard call for setup that needs to be done after fsp init + * + */ +void late_mainboard_romstage_entry(void) +{ + interrupt_routing_config(); +} + +/** + * Get function disables - most of these will be done automatically + * @param fd_mask + */ +void get_func_disables(uint32_t *mask) +{ + +} + +void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) +{ + /* No overrides needed */ + return; +} diff --git a/src/mainboard/intel/mohon_peak_crb/thermal.h b/src/mainboard/intel/mohon_peak_crb/thermal.h new file mode 100644 index 0000000..e0fbe30 --- /dev/null +++ b/src/mainboard/intel/mohon_peak_crb/thermal.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MOHONPEAK_THERMAL_H +#define MOHONPEAK_THERMAL_H + + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/intel/mohonpeak/Kconfig b/src/mainboard/intel/mohonpeak/Kconfig deleted file mode 100644 index eb97663..0000000 --- a/src/mainboard/intel/mohonpeak/Kconfig +++ /dev/null @@ -1,107 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if BOARD_INTEL_MOHONPEAK - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_FSP_RANGELEY - select SOUTHBRIDGE_INTEL_FSP_RANGELEY - select BOARD_ROMSIZE_KB_2048 #actual chip is 8MB - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select MMCONF_SUPPORT - select POST_IO - select DEFAULT_POST_DEVICE_LPC - select HAVE_FSP_BIN if FSP_PACKAGE_DEFAULT - -config MAINBOARD_DIR - string - default intel/mohonpeak - -config INCLUDE_ME - bool - default n - -config LOCK_MANAGEMENT_ENGINE - bool - default n - -config MAINBOARD_PART_NUMBER - string - default "Mohon Peak CRB" - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config CACHE_ROM_SIZE_OVERRIDE - hex - default 0x800000 - -config FSP_FILE - string - default "../intel/fsp/rangeley/FvFsp.bin" - -config CBFS_SIZE - hex - default 0x00200000 - -config DRIVERS_PS2_KEYBOARD - bool - default n - -config CONSOLE_POST - bool - default y - -config ENABLE_FSP_FAST_BOOT - bool - depends on HAVE_FSP_BIN - default y - -config VIRTUAL_ROM_SIZE - hex - depends on ENABLE_FSP_FAST_BOOT - default 0x400000 - -config FSP_PACKAGE_DEFAULT - bool "Configure defaults for the Intel FSP package" - default n - -config UART_FOR_CONSOLE - int - default 1 - help - The Mohon Peak board uses COM2 (2f8) for the serial console. - -config SEABIOS_MALLOC_UPPERMEMORY - bool - default n - help - The Avoton/Rangeley chip does not allow devices to write into the 0xe000 - segment. This means that USB/SATA devices will not work in SeaBIOS unless - we put the SeaBIOS buffer area down in the 0x9000 segment. - -endif # BOARD_INTEL_MOHONPEAK diff --git a/src/mainboard/intel/mohonpeak/Makefile.inc b/src/mainboard/intel/mohonpeak/Makefile.inc deleted file mode 100644 index 8f999cc..0000000 --- a/src/mainboard/intel/mohonpeak/Makefile.inc +++ /dev/null @@ -1,20 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2014 Sage Electronics Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += irqroute.c diff --git a/src/mainboard/intel/mohonpeak/acpi/ec.asl b/src/mainboard/intel/mohonpeak/acpi/ec.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/mohonpeak/acpi/mainboard.asl b/src/mainboard/intel/mohonpeak/acpi/mainboard.asl deleted file mode 100644 index 6b15331..0000000 --- a/src/mainboard/intel/mohonpeak/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake - Name(_PRW, Package(){0x1d, 0x05}) -} diff --git a/src/mainboard/intel/mohonpeak/acpi/platform.asl b/src/mainboard/intel/mohonpeak/acpi/platform.asl deleted file mode 100644 index aab7603..0000000 --- a/src/mainboard/intel/mohonpeak/acpi/platform.asl +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} - diff --git a/src/mainboard/intel/mohonpeak/acpi/superio.asl b/src/mainboard/intel/mohonpeak/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/mohonpeak/acpi/thermal.asl b/src/mainboard/intel/mohonpeak/acpi/thermal.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/intel/mohonpeak/acpi_tables.c b/src/mainboard/intel/mohonpeak/acpi_tables.c deleted file mode 100644 index 0349075..0000000 --- a/src/mainboard/intel/mohonpeak/acpi_tables.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <southbridge/intel/fsp_rangeley/nvs.h> -#include <northbridge/intel/fsp_rangeley/northbridge.h> - -extern const unsigned char AmlCode[]; -#if CONFIG_HAVE_ACPI_SLIC -unsigned long acpi_create_slic(unsigned long current); -#endif - -static global_nvs_t *gnvs_; - -static void acpi_create_gnvs(global_nvs_t *gnvs) -{ - gnvs_ = gnvs; - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - gnvs->pcnt = dev_count_cpu(); - - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* - * Enable Front USB ports in S5 by default - * to be consistent with back port behavior - */ - gnvs->s5u0 = 1; - gnvs->s5u1 = 1; - - /* CBMEM TOC */ - gnvs->cmem = (u32)get_cbmem_toc(); - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, - const char *oem_table_id) -{ - u32 lens, bmbound; - char pscope[] = "\_SB.PCI0"; - - bmbound = sideband_read(B_UNIT, BMBOUND); - lens = acpigen_write_scope(pscope); - lens += acpigen_write_name_dword("BMBD", bmbound); - generate_cpu_entries(); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -void smm_setup_structures(void *gnvs, void *tcg, void *smi1); - -#define ALIGN_CURRENT current = (ALIGN(current, 16)) -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - int i; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_xsdt_t *xsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_mcfg_t *mcfg; - acpi_fadt_t *fadt; - acpi_facs_t *facs; -#if CONFIG_HAVE_ACPI_SLIC - acpi_header_t *slic; -#endif - acpi_header_t *ssdt; - acpi_header_t *dsdt; - - current = start; - - /* Align ACPI tables to 16byte */ - ALIGN_CURRENT; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - ALIGN_CURRENT; - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - ALIGN_CURRENT; - xsdt = (acpi_xsdt_t *) current; - current += sizeof(acpi_xsdt_t); - ALIGN_CURRENT; - - /* clear all table memory */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, xsdt); - acpi_write_rsdt(rsdt); - acpi_write_xsdt(xsdt); - - printk(BIOS_DEBUG, "ACPI: * FACS\n"); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - ALIGN_CURRENT; - acpi_create_facs(facs); - - printk(BIOS_DEBUG, "ACPI: * DSDT\n"); - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - - ALIGN_CURRENT; - - printk(BIOS_DEBUG, "ACPI: * FADT\n"); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - ALIGN_CURRENT; - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - printk(BIOS_DEBUG, "ACPI: * HPET\n"); - - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - ALIGN_CURRENT; - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); - - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, madt); - - printk(BIOS_DEBUG, "ACPI: * MCFG\n"); - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - ALIGN_CURRENT; - acpi_add_table(rsdp, mcfg); - - /* Pack GNVS into the ACPI table area */ - for (i=0; i < dsdt->length; i++) { - if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) { - printk(BIOS_DEBUG, "ACPI: Patching up global NVS in " - "DSDT at offset 0x%04x -> 0x%08lx\n", i, current); - *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes - acpi_save_gnvs(current); - break; - } - } - - /* And fill it */ - acpi_create_gnvs((global_nvs_t *)current); - - /* And tell SMI about it */ -#if CONFIG_HAVE_SMI_HANDLER - smm_setup_structures((void *)current, NULL, NULL); -#endif - - current += sizeof(global_nvs_t); - ALIGN_CURRENT; - - /* We patched up the DSDT, so we need to recalculate the checksum */ - dsdt->checksum = 0; - dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length); - - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, - dsdt->length); - -#if CONFIG_HAVE_ACPI_SLIC - printk(BIOS_DEBUG, "ACPI: * SLIC\n"); - slic = (acpi_header_t *)current; - current += acpi_create_slic(current); - ALIGN_CURRENT; - acpi_add_table(rsdp, slic); -#endif - - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - ALIGN_CURRENT; - - printk(BIOS_DEBUG, "current = %lx\n", current); - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/intel/mohonpeak/board_info.txt b/src/mainboard/intel/mohonpeak/board_info.txt deleted file mode 100644 index 815d6f7..0000000 --- a/src/mainboard/intel/mohonpeak/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: eval -ROM protocol: SPI -Flashrom support: y diff --git a/src/mainboard/intel/mohonpeak/cmos.layout b/src/mainboard/intel/mohonpeak/cmos.layout deleted file mode 100644 index 16ae12f..0000000 --- a/src/mainboard/intel/mohonpeak/cmos.layout +++ /dev/null @@ -1,141 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -#save timestamps in pre-ram boot areas -1719 64 h 0 timestamp_value1 -1783 64 h 0 timestamp_value2 -1847 64 h 0 timestamp_value3 -1911 64 h 0 timestamp_value4 -1975 64 h 0 timestamp_value5 - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 - - diff --git a/src/mainboard/intel/mohonpeak/devicetree.cb b/src/mainboard/intel/mohonpeak/devicetree.cb deleted file mode 100644 index ee688b7..0000000 --- a/src/mainboard/intel/mohonpeak/devicetree.cb +++ /dev/null @@ -1,68 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2013 Sage Electronic Engineering, LLC. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/intel/fsp_rangeley - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/fsp_model_406dx - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 1.0 on end # PCIe Port #1 - device pci 2.0 on end # PCIe Port #2 - device pci 3.0 on end # PCIe Port #3 - device pci 4.0 on end # PCIe Port #4 - chip southbridge/intel/fsp_rangeley # Rangeley SB - - register "ide_legacy_combined" = "0x0" - register "sata_ahci" = "0x1" - register "sata_port_map" = "0x0f" - - register "fadt_pm_profile" = "PM_DESKTOP" - register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" - - device pci 0b.0 on end # IQIA - device pci 0e.0 on end # RAS - device pci 13.0 on end # SMBus 1 - device pci 14.0 on end # GbE 0 - device pci 14.1 on end # GbE 1 - device pci 14.2 on end # GbE 2 - device pci 14.3 on end # GbE 3 - device pci 16.0 on end # USB EHCI - device pci 17.0 on end # SATA 2.0 - device pci 18.0 on end # SATA 3.0 - device pci 1f.0 on end # LPC bridge - device pci 1f.3 on end # SMBus 0 - end - end -end diff --git a/src/mainboard/intel/mohonpeak/dsdt.asl b/src/mainboard/intel/mohonpeak/dsdt.asl deleted file mode 100644 index 15e6dff..0000000 --- a/src/mainboard/intel/mohonpeak/dsdt.asl +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Include debug methods - #include <arch/x86/acpi/debug.asl> - - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/fsp_rangeley/acpi/globalnvs.asl> - - #include "acpi/thermal.asl" - - #include <cpu/intel/fsp_model_406dx/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/fsp_rangeley/acpi/rangeley.asl> - #include <southbridge/intel/fsp_rangeley/acpi/soc.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/fsp_rangeley/acpi/sleepstates.asl> -} diff --git a/src/mainboard/intel/mohonpeak/fadt.c b/src/mainboard/intel/mohonpeak/fadt.c deleted file mode 100644 index 0aadac6..0000000 --- a/src/mainboard/intel/mohonpeak/fadt.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <southbridge/intel/fsp_rangeley/soc.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_fill_in_fadt(fadt,facs,dsdt); - -#define PLATFORM_HAS_FADT_CUSTOMIZATIONS 0 - - - /* - * Platform specific customizations go here. - * Update the #define above if customizations are added. - */ - - -#if PLATFORM_HAS_FADT_CUSTOMIZATIONS - header->checksum = 0; - header->checksum = - acpi_checksum((void *) fadt, sizeof(acpi_fadt_t)); -#endif - -} diff --git a/src/mainboard/intel/mohonpeak/gpio.h b/src/mainboard/intel/mohonpeak/gpio.h deleted file mode 100644 index b929c68..0000000 --- a/src/mainboard/intel/mohonpeak/gpio.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MOHONPEAK_GPIO_H -#define MOHONPEAK_GPIO_H - -#include <southbridge/intel/fsp_rangeley/gpio.h> - -/* Core GPIO */ -const struct soc_gpio soc_gpio_mode = { - .gpio15 = GPIO_MODE_GPIO, /* Board ID GPIO */ - .gpio17 = GPIO_MODE_GPIO, /* Board ID GPIO */ -}; - -const struct soc_gpio soc_gpio_direction = { - .gpio15 = GPIO_DIR_INPUT, /* Board ID GPIO */ - .gpio17 = GPIO_DIR_INPUT, /* Board ID GPIO */ -}; - -const struct soc_gpio soc_gpio_level = { -}; - -const struct soc_gpio soc_gpio_tpe = { -}; - -const struct soc_gpio soc_gpio_tne = { -}; - -const struct soc_gpio soc_gpio_ts = { -}; - -/* Keep the CFIO struct in register order, not gpio order. */ -const struct soc_cfio soc_cfio_core[] = { - { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO gpios_28 */ - { 0x8000, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_27 */ - { 0x8500, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_26 */ - { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_21 */ - { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_22 */ - { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_23 */ - { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO gpios_25 */ - { 0x8480, 0x0000, 0x0002, 0x040c }, /* CFIO gpios_24 */ - { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_19 */ - { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_20 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_18 */ - { 0x04a9, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_17 */ - { 0x80c028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_7 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_4 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_5 */ - { 0xc528, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_6 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_1 */ - { 0xc028, 0x20002, 0x0004, 0x040c }, /* CFIO gpios_2 */ - { 0xc028, 0x20002, 0x0004, 0x040c }, /* CFIO gpios_3 */ - { 0xc528, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_0 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_10 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_13 */ - { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_14 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_11 */ - { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_8 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_9 */ - { 0xc4a8, 0x30003, 0x0000, 0x040c }, /* CFIO gpios_12 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_29 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_30 */ - { 0x04a9, 0x30003, 0x0002, 0x040c }, /* CFIO gpios_15 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO gpios_16 */ -}; - -/* SUS GPIO */ -const struct soc_gpio soc_gpio_sus_mode = { - .gpio2 = GPIO_MODE_GPIO, -}; - -const struct soc_gpio soc_gpio_sus_direction = { - .gpio2 = GPIO_DIR_INPUT, -}; - -const struct soc_gpio soc_gpio_sus_level = { -}; - -const struct soc_gpio soc_gpio_sus_tpe = { -}; - -const struct soc_gpio soc_gpio_sus_tne = { -}; - -const struct soc_gpio soc_gpio_sus_ts = { -}; - -const struct soc_gpio soc_gpio_sus_we = { -}; - - -/* Keep the CFIO struct in register order, not gpio order. */ -const struct soc_cfio soc_cfio_sus[] = { - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_21 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_20 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_19 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_22 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_17 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_18 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_14 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_13 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_15 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_16 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_25 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_24 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_26 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_27 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_23 */ - { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_2 */ - { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_1 */ - { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_7 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_3 */ - { 0xc4a8, 0x30003, 0x0003, 0x040c }, /* CFIO SUS gpios_0 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x8000, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_12 */ - { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_6 */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_10 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_9 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_8 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x8050, 0x0000, 0x0004, 0x040c }, /* CFIO SUS gpios_4 */ - { 0xc4a8, 0x30003, 0x0002, 0x040c }, /* CFIO SUS gpios_11 */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0x0000, 0x0000, 0x0000, 0x0000 }, /* CFIO Reserved */ - { 0xc028, 0x30003, 0x0004, 0x040c }, /* CFIO SUS gpios_5 */ -}; - -const struct soc_gpio_map gpio_map = { - .core = { - .mode = &soc_gpio_mode, - .direction = &soc_gpio_direction, - .level = &soc_gpio_level, - .tpe = &soc_gpio_tpe, - .tne = &soc_gpio_tne, - .ts = &soc_gpio_ts, - .cfio_init = &soc_cfio_core[0], - .cfio_entrynum = sizeof(soc_cfio_core) / sizeof(struct soc_cfio), - }, - .sus = { - .mode = &soc_gpio_sus_mode, - .direction = &soc_gpio_sus_direction, - .level = &soc_gpio_sus_level, - .tpe = &soc_gpio_sus_tpe, - .tne = &soc_gpio_sus_tne, - .ts = &soc_gpio_sus_ts, - .we = &soc_gpio_sus_we, - .cfio_init = &soc_cfio_sus[0], - .cfio_entrynum = sizeof(soc_cfio_sus) / sizeof(struct soc_cfio), - }, -}; - -#endif /* MOHONPEAK_GPIO_H */ diff --git a/src/mainboard/intel/mohonpeak/irq_tables.c b/src/mainboard/intel/mohonpeak/irq_tables.c deleted file mode 100755 index eeb0dc6..0000000 --- a/src/mainboard/intel/mohonpeak/irq_tables.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -#define PIRQA 0x08 -#define PIRQB 0x09 -#define PIRQC 0x0a -#define PIRQD 0x0b -#define PIRQE 0x0c -#define PIRQF 0x0d -#define PIRQG 0x0e -#define PIRQH 0x0f - -#define PCI_IRQS 0xDCF0 - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total 18 devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x0F1C, /* Device */ - 0, /* miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x86, /* u8 checksum. */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x01<<3)|0x0, {{PIRQA, PCI_IRQS}, {PIRQB, PCI_IRQS}, {PIRQC, PCI_IRQS}, {PIRQD, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 1: INTA-PIRQA, INTB-PIRQB, INTC-PIRQC, INTD-PIRQD - {0x00,(0x02<<3)|0x0, {{PIRQA, PCI_IRQS}, {PIRQB, PCI_IRQS}, {PIRQC, PCI_IRQS}, {PIRQD, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 2: INTA-PIRQA, INTB-PIRQB, INTC-PIRQC, INTD-PIRQD - {0x00,(0x03<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 3: INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH - {0x00,(0x04<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // PCIE Port 4: INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH - {0x00,(0x0b<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // IQAT INTA-PIRQA - {0x00,(0x0f<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // RCEC INTA-PIRQA - {0x00,(0x13<<3)|0x0, {{PIRQA, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SMBUS #1 INTA-PIRQA - {0x00,(0x14<<3)|0x0, {{PIRQE, PCI_IRQS}, {PIRQF, PCI_IRQS}, {PIRQG, PCI_IRQS}, {PIRQH, PCI_IRQS}}, 0x0, 0x0}, // GbE, INTA-PIRQE, INTB-PIRQF, INTC-PIRQG, INTD-PIRQH - {0x00,(0x16<<3)|0x0, {{PIRQH, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // EHCI INTA-PIRQH - {0x00,(0x17<<3)|0x0, {{PIRQD, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SATA2 INTA-PIRQD - {0x00,(0x18<<3)|0x0, {{PIRQD, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // SATA3 INTA-PIRQD - {0x00,(0x1f<<3)|0x0, {{0x00, 0x0000}, {PIRQC, PCI_IRQS}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC/SMBUS #0 INTB - PIRQC - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} - diff --git a/src/mainboard/intel/mohonpeak/irqroute.c b/src/mainboard/intel/mohonpeak/irqroute.c deleted file mode 100644 index ee8cbb9..0000000 --- a/src/mainboard/intel/mohonpeak/irqroute.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronics Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "irqroute.h" - -DEFINE_IRQ_ROUTES; diff --git a/src/mainboard/intel/mohonpeak/irqroute.h b/src/mainboard/intel/mohonpeak/irqroute.h deleted file mode 100644 index cbd320a..0000000 --- a/src/mainboard/intel/mohonpeak/irqroute.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronics Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef IRQROUTE_H -#define IRQROUTE_H - -#include <southbridge/intel/fsp_rangeley/irq.h> -#include <southbridge/intel/fsp_rangeley/pci_devs.h> - -/* - * IR01h PCIe INT(ABCD) - PIRQ ABCD - * IR02h PCIe INT(ABCD) - PIRQ ABCD - * IR03h PCIe INT(ABCD) - PIRQ ABCD - * IR04h PCIe INT(ABCD) - PIRQ ABCD - * IR0Bh IQIA INT(ABCD) - PIRQ EFGH - * IR0Eh RAS INT(A) - PIRQ A - * IR13h SMBUS1 INT(A) - PIRQ B - * IR15h GBE INT(A) - PIRQ CDEF - * IR1Dh EHCI INT(A) - PIRQ G - * IR13h SATA2.0 INT(A) - PIRQ H - * IR13h SATA3.0 INT(A) - PIRQ A - * IR1Fh LPC INT(ABCD) - PIRQ HGBC - */ -#define PCI_DEV_PIRQ_ROUTES \ - PCI_DEV_PIRQ_ROUTE(PCIE_PORT1_DEV, A, B, C, D), \ - PCI_DEV_PIRQ_ROUTE(PCIE_PORT2_DEV, D, C, B, A), \ - PCI_DEV_PIRQ_ROUTE(PCIE_PORT3_DEV, E, F, G, H), \ - PCI_DEV_PIRQ_ROUTE(PCIE_PORT4_DEV, H, G, F, E), \ - PCI_DEV_PIRQ_ROUTE(IQAT_DEV, E, F, G, H), \ - PCI_DEV_PIRQ_ROUTE(HOST_BRIDGE_DEV, H, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(RCEC_DEV, A, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SMBUS1_DEV, B, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(GBE_DEV, C, D, E, F), \ - PCI_DEV_PIRQ_ROUTE(USB2_DEV, G, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SATA2_DEV, H, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(SATA3_DEV, A, A, A, A), \ - PCI_DEV_PIRQ_ROUTE(PCU_DEV, H, G, B, C) - -/* - * Route each PIRQ[A-H] to a PIC IRQ[0-15] - * Reserved: 0, 1, 2, 8, 13 - * PS2 keyboard: 12 - * ACPI/SCI: 9 - * Floppy: 6 - */ -#define PIRQ_PIC_ROUTES \ - PIRQ_PIC(A, 10), \ - PIRQ_PIC(B, 11), \ - PIRQ_PIC(C, 10), \ - PIRQ_PIC(D, 11), \ - PIRQ_PIC(E, 14), \ - PIRQ_PIC(F, 15), \ - PIRQ_PIC(G, 14), \ - PIRQ_PIC(H, 15) - -#endif /* IRQROUTE_H */ \ No newline at end of file diff --git a/src/mainboard/intel/mohonpeak/mainboard.c b/src/mainboard/intel/mohonpeak/mainboard.c deleted file mode 100644 index 7559fc2..0000000 --- a/src/mainboard/intel/mohonpeak/mainboard.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> - -/* - * mainboard_enable is executed as first thing after enumerate_buses(). - * This is the earliest point to add customization. - */ -static void mainboard_enable(device_t dev) -{ - -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; - diff --git a/src/mainboard/intel/mohonpeak/romstage.c b/src/mainboard/intel/mohonpeak/romstage.c deleted file mode 100644 index b1fb995..0000000 --- a/src/mainboard/intel/mohonpeak/romstage.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <drivers/intel/fsp/fsp_util.h> -#include <southbridge/intel/fsp_rangeley/soc.h> -#include <southbridge/intel/fsp_rangeley/gpio.h> -#include <southbridge/intel/fsp_rangeley/romstage.h> -#include <arch/cpu.h> -#include "gpio.h" - -static void interrupt_routing_config(void) -{ - u32 ilb_base = pci_read_config32(SOC_LPC_DEV, IBASE) & ~0xf; - - /* - * Initialize Interrupt Routings for each device in ilb_base_address. - * IR01 map to PCIe device 0x01 ... IR31 to device 0x1F. - * PIRQ_A maps to IRQ 16 ... PIRQ_H maps tp IRQ 23. - * This should match devicetree and the ACPI IRQ routing/ - */ - write32(ilb_base + ILB_ACTL, 0x0000); /* ACTL bit 2:0 SCIS IRQ9 */ - write16(ilb_base + ILB_IR01, 0x3210); /* IR01h IR(ABCD) - PIRQ(ABCD) */ - write16(ilb_base + ILB_IR02, 0x3210); /* IR02h IR(ABCD) - PIRQ(ABCD) */ - write16(ilb_base + ILB_IR03, 0x7654); /* IR03h IR(ABCD) - PIRQ(EFGH) */ - write16(ilb_base + ILB_IR04, 0x7654); /* IR04h IR(ABCD) - PIRQ(EFGH) */ - write16(ilb_base + ILB_IR20, 0x7654); /* IR14h IR(ABCD) - PIRQ(EFGH) */ - write16(ilb_base + ILB_IR22, 0x0007); /* IR16h IR(A) - PIRQ(H) */ - write16(ilb_base + ILB_IR23, 0x0003); /* IR17h IR(A) - PIRQ(D) */ - write16(ilb_base + ILB_IR24, 0x0003); /* IR18h IR(A) - PIRQ(D) */ - write16(ilb_base + ILB_IR31, 0x0020); /* IR1Fh IR(B) - PIRQ(C) */ -} - -/** - * /brief mainboard call for setup that needs to be done before fsp init - * - */ -void early_mainboard_romstage_entry(void) -{ - setup_soc_gpios(&gpio_map); -} - -/** - * /brief mainboard call for setup that needs to be done after fsp init - * - */ -void late_mainboard_romstage_entry(void) -{ - interrupt_routing_config(); -} - -/** - * Get function disables - most of these will be done automatically - * @param fd_mask - */ -void get_func_disables(uint32_t *mask) -{ - -} - -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - /* No overrides needed */ - return; -} diff --git a/src/mainboard/intel/mohonpeak/thermal.h b/src/mainboard/intel/mohonpeak/thermal.h deleted file mode 100644 index e0fbe30..0000000 --- a/src/mainboard/intel/mohonpeak/thermal.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MOHONPEAK_THERMAL_H -#define MOHONPEAK_THERMAL_H - - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 100 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 90 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/mainboard/intel/mtarvon/Kconfig b/src/mainboard/intel/mtarvon/Kconfig deleted file mode 100644 index 4097fa7..0000000 --- a/src/mainboard/intel/mtarvon/Kconfig +++ /dev/null @@ -1,38 +0,0 @@ -if BOARD_INTEL_MTARVON - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA479M - select NORTHBRIDGE_INTEL_I3100 - select SOUTHBRIDGE_INTEL_I3100 - select SUPERIO_INTEL_I3100 - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_2048 - -config MAINBOARD_DIR - string - default intel/mtarvon - -config MAINBOARD_PART_NUMBER - string - default "3100 devkit (Mt. Arvon)" - -config IRQ_SLOT_COUNT - int - default 1 - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config MAX_CPUS - int - default 4 - -endif # BOARD_INTEL_MTARVON diff --git a/src/mainboard/intel/mtarvon/board_info.txt b/src/mainboard/intel/mtarvon/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/intel/mtarvon/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/intel/mtarvon/devicetree.cb b/src/mainboard/intel/mtarvon/devicetree.cb deleted file mode 100644 index c1ff1d5..0000000 --- a/src/mainboard/intel/mtarvon/devicetree.cb +++ /dev/null @@ -1,45 +0,0 @@ -chip northbridge/intel/i3100 - device domain 0 on - subsystemid 0x8086 0x2680 inherit - device pci 00.0 on end # IMCH - device pci 00.1 on end # IMCH error status - device pci 01.0 on end # IMCH EDMA engine - device pci 02.0 on end # PCIe port A/A0 - device pci 03.0 on end # PCIe port A1 - chip southbridge/intel/i3100 - # PIRQ line -> legacy IRQ mappings - register "pirq_a_d" = "0x0b070a05" - register "pirq_e_h" = "0x0a808080" - - device pci 1c.0 on end # PCIe port B0 - device pci 1c.1 on end # PCIe port B1 - device pci 1c.2 on end # PCIe port B2 - device pci 1c.3 on end # PCIe port B3 - device pci 1d.0 on end # USB (UHCI) 1 - device pci 1d.1 on end # USB (UHCI) 2 - device pci 1d.7 on end # USB (EHCI) - device pci 1e.0 on end # PCI bridge - device pci 1e.2 on end # audio - device pci 1e.3 on end # modem - device pci 1f.0 on # LPC bridge - chip superio/intel/i3100 - device pnp 4e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - end - end - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus - end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA479M - device lapic 0 on end - end - end -end diff --git a/src/mainboard/intel/mtarvon/irq_tables.c b/src/mainboard/intel/mtarvon/irq_tables.c deleted file mode 100644 index 6f5b0a2..0000000 --- a/src/mainboard/intel/mtarvon/irq_tables.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Arastra, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* u16 Table size 32+(16*devices) */ - 0x00, /* u8 Bus 0 */ - (0x1f << 3) | 0x0, /* u8 Device 1f, Function 0 */ - 0x0000, /* u16 reserve IRQ for PCI */ - 0x8086, /* u16 Vendor */ - 0x2670, /* Device ID */ - 0x00000000, /* u32 miniport_data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x49, /* u8 checksum - mod 256 checksum must give zero */ - { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, 0xf8, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/intel/mtarvon/mptable.c b/src/mainboard/intel/mtarvon/mptable.c deleted file mode 100644 index 4dd13f9..0000000 --- a/src/mainboard/intel/mtarvon/mptable.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Arastra, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This code is based on src/mainboard/intel/jarrell/mptable.c */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u8 bus_pci = 6; - u8 bus_pcie_a = 1; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* IOAPIC handling */ - smp_write_ioapic(mc, 0x01, 0x20, IO_APIC_ADDR); - - mptable_add_isa_interrupts(mc, bus_isa, 0x1, 0); - - /* Standard local interrupt assignments */ - mptable_lintsrc(mc, bus_isa); - - /* Internal PCI devices */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x01<<2)|0, 0x01, 0x10); /* DMA controller */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x02<<2)|0, 0x01, 0x10); /* PCIe port A */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x03<<2)|0, 0x01, 0x10); /* PCIe port A1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1c<<2)|0, 0x01, 0x10); /* PCIe port B0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1c<<2)|1, 0x01, 0x11); /* PCIe port B1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1c<<2)|2, 0x01, 0x12); /* PCIe port B2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1c<<2)|3, 0x01, 0x13); /* PCIe port B3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1d<<2)|0, 0x01, 0x10); /* UHCI0/EHCI */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1d<<2)|1, 0x01, 0x11); /* UHCI1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1e<<2)|0, 0x01, 0x10); /* Audio */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1e<<2)|1, 0x01, 0x11); /* Modem */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1f<<2)|1, 0x01, 0x11); /* SATA/SMBus */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0, (0x1f<<2)|3, 0x01, 0x13); /* ? */ - - /* PCI slot */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pci, 0x00, 0x01, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pci, 0x01, 0x01, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pci, 0x02, 0x01, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pci, 0x03, 0x01, 0x13); - - /* PCIe port A slot */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pcie_a, 0x00, 0x01, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pcie_a, 0x01, 0x01, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pcie_a, 0x02, 0x01, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_pcie_a, 0x03, 0x01, 0x13); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/intel/mtarvon/romstage.c b/src/mainboard/intel/mtarvon/romstage.c deleted file mode 100644 index c1ee9bb..0000000 --- a/src/mainboard/intel/mtarvon/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Arastra, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include "southbridge/intel/i3100/early_smbus.c" -#include "southbridge/intel/i3100/early_lpc.c" -#include "northbridge/intel/i3100/raminit.h" -#include "superio/intel/i3100/i3100.h" -#include "superio/intel/i3100/early_serial.c" -#include "northbridge/intel/i3100/memory_initialized.c" -#include "cpu/x86/bist.h" -#include <spd.h> - -#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0) -#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) - -#define SERIAL_DEV PNP_DEV(0x4e, I3100_SP1) - -static inline int spd_read_byte(u16 device, u8 address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/i3100/raminit.c" -#include "lib/generic_sdram.c" -#if 0 /* skip_romstage doesn't compile with gcc */ -#include "arch/x86/lib/stages.c" -#endif - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - msr_t msr; - u16 perf; - static const struct mem_controller mch[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x00, 0), - .f1 = PCI_DEV(0, 0x00, 1), - .f2 = PCI_DEV(0, 0x00, 2), - .f3 = PCI_DEV(0, 0x00, 3), - .channel0 = { DIMM3, DIMM2, DIMM1, DIMM0 }, - .channel1 = { DIMM7, DIMM6, DIMM5, DIMM4 }, - } - }; - - if (bist == 0) { -#if 0 /* skip_romstage doesn't compile with gcc */ - /* Skip this if there was a built in self test failure */ - if (memory_initialized()) { - skip_romstage(); - } -#endif - } - - /* Set up the console */ - i3100_enable_superio(); - i3100_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - i3100_configure_uart_clk(SERIAL_DEV, I3100_UART_CLK_PREDIVIDE_26); - - console_init(); - - /* Prevent the TCO timer from rebooting us */ - i3100_halt_tco_timer(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - /* print_pci_devices(); */ - enable_smbus(); - /* dump_spd_registers(); */ - - /* Enable SpeedStep and automatic thermal throttling */ - /* FIXME: move to Pentium M init code */ - msr = rdmsr(0x1a0); - msr.lo |= (1 << 3) | (1 << 16); - wrmsr(0x1a0, msr); - msr = rdmsr(0x19d); - msr.lo |= (1 << 16); - wrmsr(0x19d, msr); - - /* Set CPU frequency/voltage to maximum */ - /* FIXME: move to Pentium M init code */ - msr = rdmsr(0x198); - perf = msr.hi & 0xffff; - msr = rdmsr(0x199); - msr.lo &= 0xffff0000; - msr.lo |= perf; - wrmsr(0x199, msr); - - sdram_initialize(ARRAY_SIZE(mch), mch); - /* dump_pci_devices(); */ - /* dump_pci_device(PCI_DEV(0, 0x00, 0)); */ - /* dump_bar14(PCI_DEV(0, 0x00, 0)); */ -} diff --git a/src/mainboard/intel/whitetip_mountain_2/Kconfig b/src/mainboard/intel/whitetip_mountain_2/Kconfig new file mode 100644 index 0000000..869b109 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/Kconfig @@ -0,0 +1,51 @@ +if BOARD_INTEL_WHITETIP_MOUNTAIN_2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_HASWELL + select SOUTHBRIDGE_INTEL_LYNXPOINT + select INTEL_LYNXPOINT_LP + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select MAINBOARD_HAS_CHROMEOS + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MONOTONIC_TIMER_MSR + select INTEL_INT15 + +config MAINBOARD_DIR + string + default intel/whitetip_mountain_2 + +config MAINBOARD_PART_NUMBER + string + default "WHITETIP MOUNTAIN 2" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 16 + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +endif # BOARD_INTEL_WHITETIP_MOUNTAIN_2 diff --git a/src/mainboard/intel/whitetip_mountain_2/Makefile.inc b/src/mainboard/intel/whitetip_mountain_2/Makefile.inc new file mode 100644 index 0000000..e519bb2 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/Makefile.inc @@ -0,0 +1,26 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 Google Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +romstage-y += chromeos.c +ramstage-y += chromeos.c +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += i915.c +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += graphics.c +ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += intel_dp.c + +smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/chromeos.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/chromeos.asl new file mode 100644 index 0000000..40ffcf0 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/chromeos.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(OIPG, Package() { + Package () { 0x0001, 0, 0xFF, "LynxPoint" }, // recovery + Package () { 0x0002, 0, 0xFF, "LynxPoint" }, // developer + Package () { 0x0003, 0, 0xFF, "LynxPoint" }, // firmware write protect +}) diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/ec.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/ec.asl new file mode 100644 index 0000000..9ae5951 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/ec.asl @@ -0,0 +1,37 @@ +Device (EC0) +{ + Name (_HID, EISAID ("PNP0C09")) + Name (_UID, 1) + Name (_GPE, 10) // GPIO 10 is SMC_RUNTIME_SCI_N + + OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) + Field (ERAM, ByteAcc, Lock, Preserve) + { + Offset (0x03), + ACPR, 1, // AC Power (1=present) + , 2, + CFAN, 1, // CPU Fan (1=on) + , 2, + LIDS, 1, // Lid State (1=open) + , 1, + SPTR, 8, // SMBUS Protocol Register + SSTS, 8, // SMBUS Status Register + SADR, 8, // SMBUS Address Register + SCMD, 8, // SMBUS Command Register + SBFR, 256, // SMBUS Block Buffer + SCNT, 8, // SMBUS Block Count + + Offset (0x3a), + ECMD, 8, // EC Command Register + + Offset (0x82), + PECL, 8, // PECI fractional (1/64 Celsius) + PECH, 8, // PECI integer (Celsius) + } + + Name (_CRS, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) +} diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/haswell_pci_irqs.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/haswell_pci_irqs.asl new file mode 100644 index 0000000..d91f9a4 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/haswell_pci_irqs.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for IvyBridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 }, + Package() { 0x001cffff, 1, 0, 18 }, + Package() { 0x001cffff, 2, 0, 19 }, + Package() { 0x001cffff, 3, 0, 20 }, + // EHCI 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 }, + // XHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 16 }, + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 21 }, + Package() { 0x001fffff, 1, 0, 22 }, + Package() { 0x001fffff, 2, 0, 23 }, + Package() { 0x001fffff, 3, 0, 16 }, + // Serial IO 0:15.0 + Package() { 0x0015ffff, 0, 0, 16 }, + Package() { 0x0015ffff, 1, 0, 17 }, + Package() { 0x0015ffff, 2, 0, 18 }, + Package() { 0x0015ffff, 3, 0, 19 }, + // SDIO 0:17.0 + Package() { 0x0017ffff, 0, 0, 16 }, + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/mainboard.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/mainboard.asl new file mode 100644 index 0000000..3e0eb33 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/mainboard.asl @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device (PWRB) +{ + Name(_HID, EisaId("PNP0C0C")) + + // Wake from deep sleep via GPIO27 + Name(_PRW, Package(){27, 4}) +} diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/platform.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/platform.asl new file mode 100644 index 0000000..e6aaf75 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/platform.asl @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/superio.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/superio.asl new file mode 100644 index 0000000..9092a6c --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/superio.asl @@ -0,0 +1,20 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Values should match those defined in devicetree.cb */ diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi/thermal.asl b/src/mainboard/intel/whitetip_mountain_2/acpi/thermal.asl new file mode 100644 index 0000000..36310e4 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi/thermal.asl @@ -0,0 +1,245 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 0 seconds + Name (_TZP, 0) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + Return (CTOK (30)) + } + + Method (_AC0) { + If (LLessEqual (\FLVL, 0)) { + Return (CTOK (\F0OF)) + } Else { + Return (CTOK (\F0ON)) + } + } + + Method (_AC1) { + If (LLessEqual (\FLVL, 1)) { + Return (CTOK (\F1OF)) + } Else { + Return (CTOK (\F1ON)) + } + } + + Method (_AC2) { + If (LLessEqual (\FLVL, 2)) { + Return (CTOK (\F2OF)) + } Else { + Return (CTOK (\F2ON)) + } + } + + Method (_AC3) { + If (LLessEqual (\FLVL, 3)) { + Return (CTOK (\F3OF)) + } Else { + Return (CTOK (\F3ON)) + } + } + + Method (_AC4) { + If (LLessEqual (\FLVL, 4)) { + Return (CTOK (\F4OF)) + } Else { + Return (CTOK (\F4ON)) + } + } + + Name (_AL0, Package () { FAN0 }) + Name (_AL1, Package () { FAN1 }) + Name (_AL2, Package () { FAN2 }) + Name (_AL3, Package () { FAN3 }) + Name (_AL4, Package () { FAN4 }) + + PowerResource (FNP0, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 0)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (0, \FLVL) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (1, \FLVL) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP1, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 1)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (1, \FLVL) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (2, \FLVL) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP2, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 2)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (2, \FLVL) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (3, \FLVL) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP3, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 3)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (3, \FLVL) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Notify (_TZ.THRM, 0x81) + } + } + + PowerResource (FNP4, 0, 0) + { + Method (_STA) { + If (LLessEqual (\FLVL, 4)) { + Return (One) + } Else { + Return (Zero) + } + } + Method (_ON) { + Store (4, \FLVL) + Notify (_TZ.THRM, 0x81) + } + Method (_OFF) { + Store (4, \FLVL) + Notify (_TZ.THRM, 0x81) + } + } + + Device (FAN0) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 0) + Name (_PR0, Package () { FNP0 }) + } + + Device (FAN1) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 1) + Name (_PR0, Package () { FNP1 }) + } + + Device (FAN2) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 2) + Name (_PR0, Package () { FNP2 }) + } + + Device (FAN3) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 3) + Name (_PR0, Package () { FNP3 }) + } + + Device (FAN4) + { + Name (_HID, EISAID ("PNP0C0B")) + Name (_UID, 4) + Name (_PR0, Package () { FNP4 }) + } + } +} diff --git a/src/mainboard/intel/whitetip_mountain_2/acpi_tables.c b/src/mainboard/intel/whitetip_mountain_2/acpi_tables.c new file mode 100644 index 0000000..20814ab --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/acpi_tables.c @@ -0,0 +1,123 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> +#include <vendorcode/google/chromeos/gnvs.h> + +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->f4of = FAN4_THRESHOLD_OFF; + gnvs->f4on = FAN4_THRESHOLD_ON; + gnvs->f4pw = FAN4_PWM; + + gnvs->f3of = FAN3_THRESHOLD_OFF; + gnvs->f3on = FAN3_THRESHOLD_ON; + gnvs->f3pw = FAN3_PWM; + + gnvs->f2of = FAN2_THRESHOLD_OFF; + gnvs->f2on = FAN2_THRESHOLD_ON; + gnvs->f2pw = FAN2_PWM; + + gnvs->f1of = FAN1_THRESHOLD_OFF; + gnvs->f1on = FAN1_THRESHOLD_ON; + gnvs->f1pw = FAN1_PWM; + + gnvs->f0of = FAN0_THRESHOLD_OFF; + gnvs->f0on = FAN0_THRESHOLD_ON; + gnvs->f0pw = FAN0_PWM; + + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; + gnvs->tmax = MAX_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Enable USB ports in S3 */ + gnvs->s3u0 = 1; + gnvs->s3u1 = 1; + + /* Disable USB ports in S5 */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* TPM Present */ + gnvs->tpmp = 1; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + +#if CONFIG_CHROMEOS + /* Emerald Lake has no EC (?) */ + gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; +#endif + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/intel/whitetip_mountain_2/board_info.txt b/src/mainboard/intel/whitetip_mountain_2/board_info.txt new file mode 100644 index 0000000..b351b8e --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/board_info.txt @@ -0,0 +1 @@ +Category: eval diff --git a/src/mainboard/intel/whitetip_mountain_2/chromeos.c b/src/mainboard/intel/whitetip_mountain_2/chromeos.c new file mode 100644 index 0000000..1461a15 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/chromeos.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <bootmode.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <southbridge/intel/lynxpoint/pch.h> + +/* Compile-time settings for developer and recovery mode. */ +#define DEV_MODE_SETTING 1 +#define REC_MODE_SETTING 0 + +#ifndef __PRE_RAM__ +#include <boot/coreboot_tables.h> + +#define GPIO_COUNT 6 + +void fill_lb_gpios(struct lb_gpios *gpios) +{ + struct lb_gpio *gpio; + + gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); + gpios->count = GPIO_COUNT; + + gpio = gpios->gpios; + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "write protect", 0); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "recovery", REC_MODE_SETTING); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "developer", DEV_MODE_SETTING); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "lid", 1); // force open + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "power", 0); + fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "oprom", gfx_get_init_done()); +} +#endif + +int get_developer_mode_switch(void) +{ + return DEV_MODE_SETTING; +} + +int get_recovery_mode_switch(void) +{ + return REC_MODE_SETTING; +} + +int get_write_protect_state(void) +{ + return 0; +} diff --git a/src/mainboard/intel/whitetip_mountain_2/cmos.layout b/src/mainboard/intel/whitetip_mountain_2/cmos.layout new file mode 100644 index 0000000..49fb262 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/cmos.layout @@ -0,0 +1,137 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +#Used by ChromeOS: +416 128 r 0 vbnv +#544 440 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/intel/whitetip_mountain_2/devicetree.cb b/src/mainboard/intel/whitetip_mountain_2/devicetree.cb new file mode 100644 index 0000000..2790cb9 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/devicetree.cb @@ -0,0 +1,88 @@ +chip northbridge/intel/haswell + + # Enable DisplayPort 1 Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DisplayPort 0 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Enable DVI Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/haswell + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_battery" = "9" # ACPI(C2) = MWAIT(C7S) + register "c3_battery" = "12" # ACPI(C3) = MWAIT(C10) + + register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) + register "c2_acpower" = "9" # ACPI(C2) = MWAIT(C7S) + register "c3_acpower" = "12" # ACPI(C3) = MWAIT(C10) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # vga controller + + chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + register "alt_gp_smi_en" = "0x0000" + register "gpe0_en_1" = "0x00000400" + register "gpe0_en_2" = "0x00000000" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + register "ide_legacy_combined" = "0x0" + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x2" + + register "sio_acpi_mode" = "1" + register "sio_i2c0_voltage" = "0" # 3.3V + register "sio_i2c1_voltage" = "0" # 3.3V + + device pci 13.0 on end # Smart Sound Audio DSP + device pci 14.0 on end # USB3 XHCI + device pci 15.0 on end # Serial I/O DMA + device pci 15.1 on end # I2C0 + device pci 15.2 on end # I2C1 + device pci 15.3 on end # GSPI0 + device pci 15.4 on end # GSPI1 + device pci 15.5 on end # UART0 + device pci 15.6 on end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 on end # SDIO + device pci 19.0 on end # GbE + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 + device pci 1c.4 on end # PCIe Port #5 + device pci 1c.5 on end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on end # LPC bridge + device pci 1f.2 on end # SATA Controller + device pci 1f.3 on end # SMBus + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/intel/whitetip_mountain_2/dsdt.asl b/src/mainboard/intel/whitetip_mountain_2/dsdt.asl new file mode 100644 index 0000000..112a47a --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/dsdt.asl @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ENABLE_TPM + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include "../../../cpu/intel/haswell/acpi/cpu.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/haswell/acpi/haswell.asl> + #include <southbridge/intel/lynxpoint/acpi/pch.asl> + } + } + + #include "acpi/chromeos.asl" + #include <vendorcode/google/chromeos/acpi/chromeos.asl> + + /* Chipset specific sleep states */ + #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> +} diff --git a/src/mainboard/intel/whitetip_mountain_2/fadt.c b/src/mainboard/intel/whitetip_mountain_2/fadt.c new file mode 100644 index 0000000..7afbbfa --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/fadt.c @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/pch.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = get_pmbase(); + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x80; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 32; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 0; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = 0; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/intel/whitetip_mountain_2/gpio.h b/src/mainboard/intel/whitetip_mountain_2/gpio.h new file mode 100644 index 0000000..884fd66 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/gpio.h @@ -0,0 +1,124 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef INTEL_WTM2_GPIO_H +#define INTEL_WTM2_GPIO_H + +#include "southbridge/intel/lynxpoint/lp_gpio.h" + +static const struct pch_lp_gpio_map mainboard_gpio_map[] = { + LP_GPIO_NATIVE, /* 0: LPSS_UART1_RXD */ + LP_GPIO_NATIVE, /* 1: LPSS_UART1_TXD */ + LP_GPIO_NATIVE, /* 2: LPSS_UART1_RTS_N_R */ + LP_GPIO_NATIVE, /* 3: LPSS_UART1_CTS_N */ + LP_GPIO_NATIVE, /* 4: LPSS_I2C0_SDA_R */ + LP_GPIO_NATIVE, /* 5: LPSS_I2C0_SCL */ + LP_GPIO_NATIVE, /* 6: LPSS_I2C1_SDA */ + LP_GPIO_NATIVE, /* 7: LPSS_I2C1_SCL */ + LP_GPIO_UNUSED, /* 8: NGFF_SLTA_WIFI_WAKE_N */ + LP_GPIO_UNUSED, /* 9: ACCEL_INT2_MCP */ + LP_GPIO_ACPI_SCI, /* 10: SMC_RUNTIME_SCI_N */ + LP_GPIO_UNUSED, /* 11: AMB_THRM_R_N */ + LP_GPIO_NATIVE, /* 12: PM_LANPHY_ENABLE */ + LP_GPIO_OUT_HIGH, /* 13: USB32_P0_PWREN */ + LP_GPIO_IRQ_EDGE, /* 14: SH_INT_ACCEL_DRDY_USB_INT_N */ + LP_GPIO_OUT_HIGH, /* 15: LAN_PWREN_N */ + LP_GPIO_OUT_HIGH, /* 16: LAN_RST_N */ + LP_GPIO_OUT_LOW, /* 17: CRIT_TEMP_REP_R_N */ + LP_GPIO_UNUSED, /* 18: TBT_FORCE_PWR */ + LP_GPIO_INPUT, /* 19: EC_IN_RW */ + LP_GPIO_NATIVE, /* 20: CK_REQ_P2_NGFFSLTA_N_R */ + LP_GPIO_NATIVE, /* 21: CK_PCIE_LAN_REQ_N */ + LP_GPIO_NATIVE, /* 22: CK_REQ_P4_TBT_N */ + LP_GPIO_NATIVE, /* 23: CK_REQ_P5_N */ + LP_GPIO_OUT_LOW, /* 24: ME_PG_LED */ + LP_GPIO_INPUT, /* 25: USB_WAKEOUT_N */ + LP_GPIO_IRQ_EDGE, /* 26: NFC_IRQ_MGP5 */ + LP_GPIO_ACPI_SCI, /* 27: SMC_WAKE_SCI_N */ + LP_GPIO_OUT_LOW, /* 28: PCH_NFC_RESET */ + LP_GPIO_NATIVE, /* 29: PCH_SLP_WLAN_N */ + LP_GPIO_NATIVE, /* 30: SUS_PWR_ACK_R */ + LP_GPIO_NATIVE, /* 31: AC_PRESENT_R */ + LP_GPIO_NATIVE, /* 32: PM_CKRUN_N */ + LP_GPIO_OUT_LOW, /* 33: SATA0_PHYSLP */ + LP_GPIO_INPUT, /* 34: ESATA_DET_N */ + LP_GPIO_INPUT, /* 35: SATA_DIRECT_PRSNT_R_N */ + LP_GPIO_INPUT, /* 36: NGFF_SSD_SATA2_PCIE1_DET_N */ + LP_GPIO_INPUT, /* 37: NGFF_SSD_SATA3_PCIE0_DET_N */ + LP_GPIO_OUT_LOW, /* 38: SATA1_PHYSLP_DIRECT */ + LP_GPIO_ACPI_SMI, /* 39: SMC_EXTSMI_N_R */ + LP_GPIO_NATIVE, /* 40: USB_OC_0_1_R_N */ + LP_GPIO_NATIVE, /* 41: USB_OC_2_6_R_N */ + LP_GPIO_INPUT, /* 42: TBT_CIO_PLUG_SMI_N_R */ + LP_GPIO_OUT_HIGH, /* 43: USB32_P1_PWREN */ + LP_GPIO_INPUT, /* 44: SENSOR_HUB_RST_N */ + LP_GPIO_INPUT, /* 45: GYRO_INT2_MCP_R */ + LP_GPIO_OUT_HIGH, /* 46: SNSR_HUB_PWREN */ + LP_GPIO_IRQ_EDGE, /* 47: SPI_TPM_HDR_IRQ_N */ + LP_GPIO_OUT_HIGH, /* 48: PCIE_TBT_RST_N */ + LP_GPIO_INPUT, /* 49: COMBO_JD */ + LP_GPIO_IRQ_EDGE, /* 50: TOUCH_PANEL_INTR_N */ + LP_GPIO_OUT_HIGH, /* 51: PCH_WIFI_RF_KILL_N */ + LP_GPIO_OUT_HIGH, /* 52: TOUCH_PNL_RST_N_R */ + LP_GPIO_INPUT, /* 53: SNSR_HUB_I2C_WAKE / ALS_INT_MCP */ + LP_GPIO_ACPI_SCI, /* 54: NGFF_SLTB_SSD_MC_WAKE_N */ + LP_GPIO_IRQ_EDGE, /* 55: TOUCHPAD_INTR_N */ + LP_GPIO_INPUT, /* 56: NGFF_SLTB_WWAN_SSD_DET1 */ + LP_GPIO_OUT_HIGH, /* 57: NGFF_SLTB_WWAN_PWREN */ + LP_GPIO_OUT_LOW, /* 58: SLATEMODE_HALLOUT_R */ + LP_GPIO_OUT_HIGH, /* 59: USB2_CAM_PWREN */ + LP_GPIO_OUT_LOW, /* 60: USB_CR_PWREN_N */ + LP_GPIO_NATIVE, /* 61: PM_SUS_STAT_N */ + LP_GPIO_NATIVE, /* 62: SUS_CK */ + LP_GPIO_NATIVE, /* 63: SLP_S5_R_N */ + LP_GPIO_NATIVE, /* 64: LPSS_SDIO_CLK_CMNHDR_R */ + LP_GPIO_NATIVE, /* 65: LPSS_SDIO_CMD_CMNHDR_R */ + LP_GPIO_NATIVE, /* 66: LPSS_SDIO_D0_CMNHDR_R */ + LP_GPIO_NATIVE, /* 67: LPSS_SDIO_D1_CMNHDR_R */ + LP_GPIO_NATIVE, /* 68: LPSS_SDIO_D2_CMNHDR_R */ + LP_GPIO_NATIVE, /* 69: LPSS_SDIO_D3_CMNHDR_R1 */ + LP_GPIO_NATIVE, /* 70: NGFF_SLTA_WIFI_PWREN_N_R */ + LP_GPIO_OUT_HIGH, /* 71: MPHY_PWREN */ + LP_GPIO_NATIVE, /* 72: PM_BATLOW_R_N */ + LP_GPIO_NATIVE, /* 73: PCH_NOT_N */ + LP_GPIO_NATIVE, /* 74: SML1_DATA */ + LP_GPIO_NATIVE, /* 75: SML1_CK */ + LP_GPIO_OUT_HIGH, /* 76: PCH_AUDIO_PWR_R */ + LP_GPIO_OUT_LOW, /* 77: PC_SLTB_SSD_RST_N_R */ + LP_GPIO_INPUT, /* 78: PM_EXTTS0_EC_N */ + LP_GPIO_IRQ_EDGE, /* 79: SIO1007_IRQ_N */ + LP_GPIO_INPUT, /* 80: PM_EXTTS1_R_N */ + LP_GPIO_NATIVE, /* 81: PCH_HDA_SPKR */ + LP_GPIO_NATIVE, /* 82: H_RCIN_N */ + LP_GPIO_NATIVE, /* 83: LPSS_GSPI0_CS_R_N */ + LP_GPIO_NATIVE, /* 84: LPSS_GSPI0_CLK_R */ + LP_GPIO_NATIVE, /* 85: LPSS_GSPI0_MISO_R */ + LP_GPIO_NATIVE, /* 86: LPSS_GSPI0_MOSI_BBS0_R */ + LP_GPIO_NATIVE, /* 87: LPSS_GSPI1_CS_R_N */ + LP_GPIO_NATIVE, /* 88: LPSS_GSPI1_CLK_R */ + LP_GPIO_NATIVE, /* 89: LPSS_GSPI1_MISO_R */ + LP_GPIO_OUT_LOW, /* 90: NGFF_SLTA_WIFI_RST_N */ + LP_GPIO_NATIVE, /* 91: LPSS_UART0_RXD */ + LP_GPIO_NATIVE, /* 92: LPSS_UART0_TXD */ + LP_GPIO_NATIVE, /* 93: LPSS_UART0_RTS_N */ + LP_GPIO_NATIVE, /* 94: LPSS_UART0_CTS_N */ + LP_GPIO_END +}; + +#endif diff --git a/src/mainboard/intel/whitetip_mountain_2/graphics.c b/src/mainboard/intel/whitetip_mountain_2/graphics.c new file mode 100644 index 0000000..f0f2fcf --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/graphics.c @@ -0,0 +1,87 @@ +/* +* This file is part of the coreboot project. +* +* Copyright 2013 Google Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; version 2 of the License. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ +/* this file was for the most part machine generated, and in future + * will be all machine generated. Avoid editing. + */ +#include <console/console.h> +#include <device/i915.h> + +void graphics_register_reset(u32 aux_ctl, u32 aux_data, int verbose) +{ + + io_i915_write32(0x80000000,0x45400); + io_i915_write32(0x00000000,_CURACNTR); + io_i915_write32((/* PIPEA */0x0<<24)|0x00000000,_DSPACNTR); + io_i915_write32(0x00000000,_DSPBCNTR); + io_i915_write32(0x80000000,CPU_VGACNTRL); + io_i915_write32(0x00000000,_DSPASIZE+0xc); + io_i915_write32(0x00000000,_DSPBSURF); + io_i915_write32(0x00000000,0x4f050); + io_i915_write32( DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | + DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | + DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | + DP_SYNC_VS_HIGH |0x00000091,DP_A); + io_i915_write32(0x00200090,_FDI_RXA_MISC); + io_i915_write32(0x0a000000,_FDI_RXA_MISC); + /* not yet documented anywhere that we can find. */ + io_i915_write32(0x00000070,0x46408); + io_i915_write32(0x04000000,0x42090); + io_i915_write32(0x40000000,0x4f050); + io_i915_write32(0x00000000,0x9840); + io_i915_write32(0xa4000000,0x42090); + io_i915_write32(0x00004000,0x42080); + io_i915_write32(0x00ffffff,0x64f80); + io_i915_write32(0x0007000e,0x64f84); + io_i915_write32(0x00d75fff,0x64f88); + io_i915_write32(0x000f000a,0x64f8c); + io_i915_write32(0x00c30fff,0x64f90); + io_i915_write32(0x00060006,0x64f94); + io_i915_write32(0x00aaafff,0x64f98); + io_i915_write32(0x001e0000,0x64f9c); + io_i915_write32(0x00ffffff,0x64fa0); + io_i915_write32(0x000f000a,0x64fa4); + io_i915_write32(0x00d75fff,0x64fa8); + io_i915_write32(0x00160004,0x64fac); + io_i915_write32(0x00c30fff,0x64fb0); + io_i915_write32(0x001e0000,0x64fb4); + io_i915_write32(0x00ffffff,0x64fb8); + io_i915_write32(0x00060006,0x64fbc); + io_i915_write32(0x00d75fff,0x64fc0); + io_i915_write32(0x001e0000,0x64fc4); + io_i915_write32(0x00ffffff,0x64e00); + io_i915_write32(0x0006000e,0x64e04); + io_i915_write32(0x00d75fff,0x64e08); + io_i915_write32(0x0005000a,0x64e0c); + io_i915_write32(0x00c30fff,0x64e10); + io_i915_write32(0x00040006,0x64e14); + io_i915_write32(0x80aaafff,0x64e18); + io_i915_write32(0x000b0000,0x64e1c); + io_i915_write32(0x00ffffff,0x64e20); + io_i915_write32(0x0005000a,0x64e24); + io_i915_write32(0x00d75fff,0x64e28); + io_i915_write32(0x000c0004,0x64e2c); + io_i915_write32(0x80c30fff,0x64e30); + io_i915_write32(0x000b0000,0x64e34); + io_i915_write32(0x00ffffff,0x64e38); + io_i915_write32(0x00040006,0x64e3c); + io_i915_write32(0x80d75fff,0x64e40); + io_i915_write32(0x000b0000,0x64e44); + /* end not yet documented. */ + io_i915_write32(0x10000000,SDEISR+0x30); +} diff --git a/src/mainboard/intel/whitetip_mountain_2/hda_verb.c b/src/mainboard/intel/whitetip_mountain_2/hda_verb.c new file mode 100644 index 0000000..c18e79b --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/hda_verb.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 + 0x10134210, // Subsystem ID + 0x00000007, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ + AZALIA_SUBVENDOR(0x0, 0x10134210), + + /* Pin Widget Verb Table */ + + /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), + + /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ + AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), + + /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ + AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), + + /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), + + /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ + AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), + + /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ + AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), + + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/whitetip_mountain_2/i915.c b/src/mainboard/intel/whitetip_mountain_2/i915.c new file mode 100644 index 0000000..f542a13 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/i915.c @@ -0,0 +1,233 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2013 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <stdlib.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <delay.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <smbios.h> +#include <device/pci.h> +#include <ec/google/chromeec/ec.h> +#include <cbfs_core.h> + +#include <cpu/x86/tsc.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/msr.h> +#include <edid.h> +#include <device/i915.h> + +/* how many bytes do we need for the framebuffer? + * Well, this gets messy. To get an exact answer, we have + * to ask the panel, but we'd rather zero the memory + * and set up the gtt while the panel powers up. So, + * we take a reasonable guess, secure in the knowledge that the + * MRC has to overestimate the number of bytes used. + * 8 MiB is a very safe guess. There may be a better way later, but + * fact is, the initial framebuffer is only very temporary. And taking + * a little long is ok; this is done much faster than the AUX + * channel is ready for IO. + */ +#define FRAME_BUFFER_BYTES (8*MiB) +/* how many 4096-byte pages do we need for the framebuffer? + * There are hard ways to get this, and easy ways: + * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096 + * on this chip (and in fact every Intel graphics chip we've seen). + */ +#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096)) + +static int verbose = 0; + +static unsigned int *mmio; +static unsigned int graphics; +static unsigned short addrport; +static unsigned short dataport; +static unsigned int physbase; + +const u32 link_edid_data[] = { + 0xffffff00, 0x00ffffff, 0x0379e430, 0x00000000, + 0x04011500, 0x96121ba5, 0xa2d54f02, 0x26935259, + 0x00545017, 0x01010000, 0x01010101, 0x01010101, + 0x01010101, 0x6f6d0101, 0xa4a0a000, 0x20306031, + 0xb510003a, 0x19000010, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x4c00fe00, + 0x69442047, 0x616c7073, 0x20200a79, 0xfe000000, + 0x31504c00, 0x45513932, 0x50532d31, 0x24003141, +}; + +static int ioread = 0, iowrite = 0; + +static char *regname(unsigned long addr) +{ + static char name[16]; + snprintf(name, sizeof (name), "0x%lx", addr); + return name; +} + +unsigned long io_i915_read32(unsigned long addr) +{ + unsigned long val; + outl(addr, addrport); + val = inl(dataport); + ioread += 2; + if (verbose & vio)printk(BIOS_SPEW, "%s: Got %08lx\n", regname(addr), val); + return val; +} + +void io_i915_write32(unsigned long val, unsigned long addr) +{ + if (verbose & vio)printk(BIOS_SPEW, "%s: outl %08lx\n", regname(addr), val); + outl(addr, addrport); + outl(val, dataport); + iowrite += 2; +} + +/* GTT is the Global Translation Table for the graphics pipeline. + * It is used to translate graphics addresses to physical + * memory addresses. As in the CPU, GTTs map 4K pages. + * The setgtt function adds a further bit of flexibility: + * it allows you to set a range (the first two parameters) to point + * to a physical address (third parameter);the physical address is + * incremented by a count (fourth parameter) for each GTT in the + * range. + * Why do it this way? For ultrafast startup, + * we can point all the GTT entries to point to one page, + * and set that page to 0s: + * memset(physbase, 0, 4096); + * setgtt(0, 4250, physbase, 0); + * this takes about 2 ms, and is a win because zeroing + * the page takes a up to 200 ms. + * This call sets the GTT to point to a linear range of pages + * starting at physbase. + */ + +static void +setgtt(int start, int end, unsigned long base, int inc) +{ + int i; + + for(i = start; i < end; i++){ + u32 word = base + i*inc; + io_i915_write32(word|1,(i*4)|1); + } +} + +static unsigned long tickspermicrosecond = 1795; +static unsigned long long globalstart; + +static unsigned long +microseconds(unsigned long long start, unsigned long long end) +{ + unsigned long ret; + ret = ((end - start)/tickspermicrosecond); + return ret; +} + +static unsigned long globalmicroseconds(void) +{ + return microseconds(globalstart, rdtscll()); +} + +static int i915_init_done = 0; + +int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio, + unsigned int gfx); + +int i915lightup(unsigned int pphysbase, unsigned int piobase, + unsigned int pmmio, unsigned int pgfx) +{ + int must_cycle_power = 0; + + /* frame buffer pointer */ + u32 *l; + int i; + unsigned long before_gtt, after_gtt; + + mmio = (void *)pmmio; + addrport = piobase; + dataport = addrport + 4; + physbase = pphysbase; + graphics = pgfx; + printk(BIOS_SPEW, + "i915lightup: graphics %p mmio %p" + "addrport %04x physbase %08x\n", + (void *)graphics, mmio, addrport, physbase); + globalstart = rdtscll(); + + /* turn it on. The VBIOS does it this way, so we hope that's ok. */ + verbose = 0; + io_i915_write32(0xabcd000f, PCH_PP_CONTROL); + + /* the AUX channel needs a small amount of time to spin up. + * Rather than udelay, do some useful work: + * Zero out the frame buffer memory, + * and set the global translation table (GTT) + */ + printk(BIOS_SPEW, "Set not-White (%08x) for %d pixels\n", 0xffffff, + FRAME_BUFFER_BYTES/sizeof(u32)); + for(l = (u32 *)graphics, i = 0; + i < FRAME_BUFFER_BYTES/sizeof(u32); i++){ + l[i] = 0x1122ff; + } + printk(BIOS_SPEW, "GTT: set %d pages starting at %p\n", + FRAME_BUFFER_PAGES, (void *)physbase); + before_gtt = globalmicroseconds(); + setgtt(0, FRAME_BUFFER_PAGES, physbase, 4096); + after_gtt = globalmicroseconds(); + + /* The reset is basically harmless, and can be + * repeated by the VBIOS in any event. + */ + + graphics_register_reset(DPA_AUX_CH_CTL, DPA_AUX_CH_DATA1, verbose); + + /* failures after this point can return without + * powering off the panel. + */ + + if (1) + goto fail; + /* failures after this point MUST power off the panel + * and wait 600 ms. + */ + + i915_init_done = 1; + return i915_init_done; + +fail: + printk(BIOS_SPEW, "Graphics could not be started;"); + if (must_cycle_power){ + printk(BIOS_SPEW, "Turn off power and wait ..."); + io_i915_write32(0xabcd0000, PCH_PP_CONTROL); + udelay(600000); + } + printk(BIOS_SPEW, "Returning.\n"); + return 0; + +} diff --git a/src/mainboard/intel/whitetip_mountain_2/intel_dp.c b/src/mainboard/intel/whitetip_mountain_2/intel_dp.c new file mode 100644 index 0000000..e7222a3 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/intel_dp.c @@ -0,0 +1,167 @@ +/* + * Copyright 2013 Google Inc. + * Copyright © 2008 Intel Corporation + * + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard keithp@keithp.com + * + */ + +#include <console/console.h> +#include <stdint.h> +#include <delay.h> +#include <device/i915.h> + +u32 +pack_aux(u32 *src32, int src_bytes) +{ + u8 *src = (u8 *)src32; + int i; + u32 v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((u32) src[i]) << ((3-i) * 8); + return v; +} + +void +unpack_aux(u32 src, u8 *dst, int dst_bytes) +{ + + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +int +intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes, + u8 *recv, int recv_size) +{ + int i; + int recv_bytes; + u32 status; + u32 aux_clock_divider; + int try, precharge = 5; + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that + * + * Note that PCH attached eDP panels should use a 125MHz input + * clock divider. + */ + /* 200 on link */ + aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */ + + /* Try to wait for any previous AUX channel activity */ + for (try = 0; try < 3; try++) { + status = io_i915_read32(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + udelay(1000); + } + + if (try == 3) { + printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); + status = io_i915_read32(ch_ctl); + printk(BIOS_SPEW, "dp_aux_ch not started status 0x%08x\n", + status); + return -1; + } + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) + io_i915_write32(send[i], ch_data + i); + + /* Send the command and wait for it to complete */ + io_i915_write32( + DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); + for (;;) { + status = io_i915_read32(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + udelay(100); + } + + /* Clear done status and any errors */ + io_i915_write32( + status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); + + if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR)) + continue; + if (status & DP_AUX_CH_CTL_DONE) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_SPEW, "dp_aux_ch not done status 0x%08x\n", status); + return -1; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_SPEW, "dp_aux_ch receive error status 0x%08x\n", status); + return -1; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); + printk(BIOS_SPEW, "dp_aux_ch timeout status 0x%08x\n", status); + return -1; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) + unpack_aux(io_i915_read32(ch_data + i), + recv + i, recv_bytes - i); + + return recv_bytes; +} diff --git a/src/mainboard/intel/whitetip_mountain_2/mainboard.c b/src/mainboard/intel/whitetip_mountain_2/mainboard.c new file mode 100644 index 0000000..a6839fc --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/mainboard.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/lynxpoint/pch.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/intel/whitetip_mountain_2/mainboard_smi.c b/src/mainboard/intel/whitetip_mountain_2/mainboard_smi.c new file mode 100644 index 0000000..bcc94d6 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/mainboard_smi.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/lynxpoint/nvs.h> +#include <southbridge/intel/lynxpoint/pch.h> +#include <southbridge/intel/lynxpoint/me.h> +#include <northbridge/intel/haswell/haswell.h> +#include <cpu/intel/haswell/haswell.h> + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APMC_FINALIZE: + if (mainboard_finalized) { + printk(BIOS_DEBUG, "SMI#: Already finalized\n"); + return 0; + } + + intel_pch_finalize_smm(); + intel_northbridge_haswell_finalize_smm(); + intel_cpu_haswell_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/intel/whitetip_mountain_2/romstage.c b/src/mainboard/intel/whitetip_mountain_2/romstage.c new file mode 100644 index 0000000..b831244 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/romstage.c @@ -0,0 +1,140 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stddef.h> +#include <console/console.h> +#include "cpu/intel/haswell/haswell.h" +#include "northbridge/intel/haswell/haswell.h" +#include "northbridge/intel/haswell/raminit.h" +#include "southbridge/intel/lynxpoint/pch.h" +#include "southbridge/intel/lynxpoint/lp_gpio.h" +#include "gpio.h" + +const struct rcba_config_instruction rcba_config[] = { + + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P4IP ETH0 INTB -> PIRQC + * D29IP_E1P EHCI1 INTA -> PIRQD + * D20IP_XHCI XHCI INTA -> PIRQA + * D31IP_SIP SATA INTA -> PIRQF (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQG + * D31IP_TTIP THRT INTC -> PIRQH + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + */ + + /* Device interrupt pin register (board specific) */ + RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), + RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), + RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | + (INTB << D28IP_P4IP)), + RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), + RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), + RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)), + RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), + RCBA_SET_REG_32(D20IR, (INTA << D20IP_XHCI)), + + /* Device interrupt route registers */ + RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)), + RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)), + RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)), + RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)), + RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), + RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), + RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQA, 0, 0, 0)), + + /* Disable unused devices (board specific) */ + RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), + + RCBA_END_CONFIG, +}; + +void mainboard_romstage_entry(unsigned long bist) +{ + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = DEFAULT_MCHBAR, + .dmibar = DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = DEFAULT_PCIEXBAR, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = HPET_ADDR, + .rcba = DEFAULT_RCBA, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .temp_mmio_base = 0xfed08000, + .system_type = 5, /* ULT */ + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xa2, 0x00, 0xa2, 0x00 }, + .ec_present = 1, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb2_ports = { + /* Length, Enable, OCn# */ + { 0x40, 1, USB_OC_PIN_SKIP, /* P0: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P1: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P2: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P3: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P4: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P5: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 1, USB_OC_PIN_SKIP, /* P6: */ + USB_PORT_FRONT_PANEL }, + { 0x40, 0, USB_OC_PIN_SKIP, /* P7: */ + USB_PORT_FRONT_PANEL }, + }, + .usb3_ports = { + /* Enable, OCn# */ + { 1, USB_OC_PIN_SKIP }, /* P1; */ + { 1, USB_OC_PIN_SKIP }, /* P2; */ + { 1, USB_OC_PIN_SKIP }, /* P3; */ + { 1, USB_OC_PIN_SKIP }, /* P4; */ + }, + }; + + struct romstage_params romstage_params = { + .pei_data = &pei_data, + .gpio_map = &mainboard_gpio_map, + .rcba_config = &rcba_config[0], + .bist = bist, + .copy_spd = NULL, + }; + + /* Call into the real romstage main with this board's attributes. */ + romstage_common(&romstage_params); +} diff --git a/src/mainboard/intel/whitetip_mountain_2/thermal.h b/src/mainboard/intel/whitetip_mountain_2/thermal.h new file mode 100644 index 0000000..e6116b6 --- /dev/null +++ b/src/mainboard/intel/whitetip_mountain_2/thermal.h @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef WTM2_THERMAL_H +#define WTM2_THERMAL_H + +/* Fan is OFF */ +#define FAN4_THRESHOLD_OFF 0 +#define FAN4_THRESHOLD_ON 0 +#define FAN4_PWM 0x00 + +/* Fan is at LOW speed */ +#define FAN3_THRESHOLD_OFF 48 +#define FAN3_THRESHOLD_ON 55 +#define FAN3_PWM 0x40 + +/* Fan is at MEDIUM speed */ +#define FAN2_THRESHOLD_OFF 52 +#define FAN2_THRESHOLD_ON 64 +#define FAN2_PWM 0x80 + +/* Fan is at HIGH speed */ +#define FAN1_THRESHOLD_OFF 60 +#define FAN1_THRESHOLD_ON 68 +#define FAN1_PWM 0xb0 + +/* Fan is at FULL speed */ +#define FAN0_THRESHOLD_OFF 66 +#define FAN0_THRESHOLD_ON 78 +#define FAN0_PWM 0xff + +/* Temperature which OS will shutdown at */ +#define CRITICAL_TEMPERATURE 100 + +/* Temperature which OS will throttle CPU */ +#define PASSIVE_TEMPERATURE 90 + +/* Tj_max value for calculating PECI CPU temperature */ +#define MAX_TEMPERATURE 100 + +#endif diff --git a/src/mainboard/intel/wtm2/Kconfig b/src/mainboard/intel/wtm2/Kconfig deleted file mode 100644 index 353279a..0000000 --- a/src/mainboard/intel/wtm2/Kconfig +++ /dev/null @@ -1,51 +0,0 @@ -if BOARD_INTEL_WTM2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_HASWELL - select SOUTHBRIDGE_INTEL_LYNXPOINT - select INTEL_LYNXPOINT_LP - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select MAINBOARD_HAS_CHROMEOS - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MONOTONIC_TIMER_MSR - select INTEL_INT15 - -config MAINBOARD_DIR - string - default intel/wtm2 - -config MAINBOARD_PART_NUMBER - string - default "WHITETIP MOUNTAIN 2" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 16 - -config VGA_BIOS_FILE - string - default "pci8086,0166.rom" - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -endif # BOARD_INTEL_WTM2 diff --git a/src/mainboard/intel/wtm2/Makefile.inc b/src/mainboard/intel/wtm2/Makefile.inc deleted file mode 100644 index e519bb2..0000000 --- a/src/mainboard/intel/wtm2/Makefile.inc +++ /dev/null @@ -1,26 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 Google Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -romstage-y += chromeos.c -ramstage-y += chromeos.c -ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += i915.c -ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += graphics.c -ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += intel_dp.c - -smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c diff --git a/src/mainboard/intel/wtm2/acpi/chromeos.asl b/src/mainboard/intel/wtm2/acpi/chromeos.asl deleted file mode 100644 index 40ffcf0..0000000 --- a/src/mainboard/intel/wtm2/acpi/chromeos.asl +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Name(OIPG, Package() { - Package () { 0x0001, 0, 0xFF, "LynxPoint" }, // recovery - Package () { 0x0002, 0, 0xFF, "LynxPoint" }, // developer - Package () { 0x0003, 0, 0xFF, "LynxPoint" }, // firmware write protect -}) diff --git a/src/mainboard/intel/wtm2/acpi/ec.asl b/src/mainboard/intel/wtm2/acpi/ec.asl deleted file mode 100644 index 9ae5951..0000000 --- a/src/mainboard/intel/wtm2/acpi/ec.asl +++ /dev/null @@ -1,37 +0,0 @@ -Device (EC0) -{ - Name (_HID, EISAID ("PNP0C09")) - Name (_UID, 1) - Name (_GPE, 10) // GPIO 10 is SMC_RUNTIME_SCI_N - - OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff) - Field (ERAM, ByteAcc, Lock, Preserve) - { - Offset (0x03), - ACPR, 1, // AC Power (1=present) - , 2, - CFAN, 1, // CPU Fan (1=on) - , 2, - LIDS, 1, // Lid State (1=open) - , 1, - SPTR, 8, // SMBUS Protocol Register - SSTS, 8, // SMBUS Status Register - SADR, 8, // SMBUS Address Register - SCMD, 8, // SMBUS Command Register - SBFR, 256, // SMBUS Block Buffer - SCNT, 8, // SMBUS Block Count - - Offset (0x3a), - ECMD, 8, // EC Command Register - - Offset (0x82), - PECL, 8, // PECI fractional (1/64 Celsius) - PECH, 8, // PECI integer (Celsius) - } - - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0x62, 0x62, 0, 1) - IO (Decode16, 0x66, 0x66, 0, 1) - }) -} diff --git a/src/mainboard/intel/wtm2/acpi/haswell_pci_irqs.asl b/src/mainboard/intel/wtm2/acpi/haswell_pci_irqs.asl deleted file mode 100644 index d91f9a4..0000000 --- a/src/mainboard/intel/wtm2/acpi/haswell_pci_irqs.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for IvyBridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 }, - Package() { 0x001cffff, 1, 0, 18 }, - Package() { 0x001cffff, 2, 0, 19 }, - Package() { 0x001cffff, 3, 0, 20 }, - // EHCI 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 }, - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 16 }, - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 21 }, - Package() { 0x001fffff, 1, 0, 22 }, - Package() { 0x001fffff, 2, 0, 23 }, - Package() { 0x001fffff, 3, 0, 16 }, - // Serial IO 0:15.0 - Package() { 0x0015ffff, 0, 0, 16 }, - Package() { 0x0015ffff, 1, 0, 17 }, - Package() { 0x0015ffff, 2, 0, 18 }, - Package() { 0x0015ffff, 3, 0, 19 }, - // SDIO 0:17.0 - Package() { 0x0017ffff, 0, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKE, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKG, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/wtm2/acpi/mainboard.asl b/src/mainboard/intel/wtm2/acpi/mainboard.asl deleted file mode 100644 index 3e0eb33..0000000 --- a/src/mainboard/intel/wtm2/acpi/mainboard.asl +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake from deep sleep via GPIO27 - Name(_PRW, Package(){27, 4}) -} diff --git a/src/mainboard/intel/wtm2/acpi/platform.asl b/src/mainboard/intel/wtm2/acpi/platform.asl deleted file mode 100644 index e6aaf75..0000000 --- a/src/mainboard/intel/wtm2/acpi/platform.asl +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/intel/wtm2/acpi/superio.asl b/src/mainboard/intel/wtm2/acpi/superio.asl deleted file mode 100644 index 9092a6c..0000000 --- a/src/mainboard/intel/wtm2/acpi/superio.asl +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Values should match those defined in devicetree.cb */ diff --git a/src/mainboard/intel/wtm2/acpi/thermal.asl b/src/mainboard/intel/wtm2/acpi/thermal.asl deleted file mode 100644 index 36310e4..0000000 --- a/src/mainboard/intel/wtm2/acpi/thermal.asl +++ /dev/null @@ -1,245 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - Name (_TC1, 0x02) - Name (_TC2, 0x05) - - // Thermal zone polling frequency: 0 seconds - Name (_TZP, 0) - - // Thermal sampling period for passive cooling: 2 seconds - Name (_TSP, 20) - - // Convert from Degrees C to 1/10 Kelvin for ACPI - Method (CTOK, 1) { - // 10th of Degrees C - Multiply (Arg0, 10, Local0) - - // Convert to Kelvin - Add (Local0, 2732, Local0) - - Return (Local0) - } - - // Threshold for OS to shutdown - Method (_CRT, 0, Serialized) - { - Return (CTOK (\TCRT)) - } - - // Threshold for passive cooling - Method (_PSV, 0, Serialized) - { - Return (CTOK (\TPSV)) - } - - // Processors used for passive cooling - Method (_PSL, 0, Serialized) - { - Return (\PPKG ()) - } - - Method (_TMP, 0, Serialized) - { - Return (CTOK (30)) - } - - Method (_AC0) { - If (LLessEqual (\FLVL, 0)) { - Return (CTOK (\F0OF)) - } Else { - Return (CTOK (\F0ON)) - } - } - - Method (_AC1) { - If (LLessEqual (\FLVL, 1)) { - Return (CTOK (\F1OF)) - } Else { - Return (CTOK (\F1ON)) - } - } - - Method (_AC2) { - If (LLessEqual (\FLVL, 2)) { - Return (CTOK (\F2OF)) - } Else { - Return (CTOK (\F2ON)) - } - } - - Method (_AC3) { - If (LLessEqual (\FLVL, 3)) { - Return (CTOK (\F3OF)) - } Else { - Return (CTOK (\F3ON)) - } - } - - Method (_AC4) { - If (LLessEqual (\FLVL, 4)) { - Return (CTOK (\F4OF)) - } Else { - Return (CTOK (\F4ON)) - } - } - - Name (_AL0, Package () { FAN0 }) - Name (_AL1, Package () { FAN1 }) - Name (_AL2, Package () { FAN2 }) - Name (_AL3, Package () { FAN3 }) - Name (_AL4, Package () { FAN4 }) - - PowerResource (FNP0, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 0)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (0, \FLVL) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (1, \FLVL) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP1, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 1)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (1, \FLVL) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (2, \FLVL) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP2, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 2)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (2, \FLVL) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (3, \FLVL) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP3, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 3)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (3, \FLVL) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Notify (_TZ.THRM, 0x81) - } - } - - PowerResource (FNP4, 0, 0) - { - Method (_STA) { - If (LLessEqual (\FLVL, 4)) { - Return (One) - } Else { - Return (Zero) - } - } - Method (_ON) { - Store (4, \FLVL) - Notify (_TZ.THRM, 0x81) - } - Method (_OFF) { - Store (4, \FLVL) - Notify (_TZ.THRM, 0x81) - } - } - - Device (FAN0) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 0) - Name (_PR0, Package () { FNP0 }) - } - - Device (FAN1) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 1) - Name (_PR0, Package () { FNP1 }) - } - - Device (FAN2) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 2) - Name (_PR0, Package () { FNP2 }) - } - - Device (FAN3) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 3) - Name (_PR0, Package () { FNP3 }) - } - - Device (FAN4) - { - Name (_HID, EISAID ("PNP0C0B")) - Name (_UID, 4) - Name (_PR0, Package () { FNP4 }) - } - } -} diff --git a/src/mainboard/intel/wtm2/acpi_tables.c b/src/mainboard/intel/wtm2/acpi_tables.c deleted file mode 100644 index 20814ab..0000000 --- a/src/mainboard/intel/wtm2/acpi_tables.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> -#include <vendorcode/google/chromeos/gnvs.h> - -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->f4of = FAN4_THRESHOLD_OFF; - gnvs->f4on = FAN4_THRESHOLD_ON; - gnvs->f4pw = FAN4_PWM; - - gnvs->f3of = FAN3_THRESHOLD_OFF; - gnvs->f3on = FAN3_THRESHOLD_ON; - gnvs->f3pw = FAN3_PWM; - - gnvs->f2of = FAN2_THRESHOLD_OFF; - gnvs->f2on = FAN2_THRESHOLD_ON; - gnvs->f2pw = FAN2_PWM; - - gnvs->f1of = FAN1_THRESHOLD_OFF; - gnvs->f1on = FAN1_THRESHOLD_ON; - gnvs->f1pw = FAN1_PWM; - - gnvs->f0of = FAN0_THRESHOLD_OFF; - gnvs->f0on = FAN0_THRESHOLD_ON; - gnvs->f0pw = FAN0_PWM; - - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; - gnvs->tmax = MAX_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* Disable USB ports in S5 */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* TPM Present */ - gnvs->tpmp = 1; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - -#if CONFIG_CHROMEOS - /* Emerald Lake has no EC (?) */ - gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; -#endif - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/intel/wtm2/board_info.txt b/src/mainboard/intel/wtm2/board_info.txt deleted file mode 100644 index b351b8e..0000000 --- a/src/mainboard/intel/wtm2/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: eval diff --git a/src/mainboard/intel/wtm2/chromeos.c b/src/mainboard/intel/wtm2/chromeos.c deleted file mode 100644 index 1461a15..0000000 --- a/src/mainboard/intel/wtm2/chromeos.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <bootmode.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <southbridge/intel/lynxpoint/pch.h> - -/* Compile-time settings for developer and recovery mode. */ -#define DEV_MODE_SETTING 1 -#define REC_MODE_SETTING 0 - -#ifndef __PRE_RAM__ -#include <boot/coreboot_tables.h> - -#define GPIO_COUNT 6 - -void fill_lb_gpios(struct lb_gpios *gpios) -{ - struct lb_gpio *gpio; - - gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); - gpios->count = GPIO_COUNT; - - gpio = gpios->gpios; - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "write protect", 0); - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "recovery", REC_MODE_SETTING); - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "developer", DEV_MODE_SETTING); - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "lid", 1); // force open - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "power", 0); - fill_lb_gpio(gpio++, -1, ACTIVE_HIGH, "oprom", gfx_get_init_done()); -} -#endif - -int get_developer_mode_switch(void) -{ - return DEV_MODE_SETTING; -} - -int get_recovery_mode_switch(void) -{ - return REC_MODE_SETTING; -} - -int get_write_protect_state(void) -{ - return 0; -} diff --git a/src/mainboard/intel/wtm2/cmos.layout b/src/mainboard/intel/wtm2/cmos.layout deleted file mode 100644 index 49fb262..0000000 --- a/src/mainboard/intel/wtm2/cmos.layout +++ /dev/null @@ -1,137 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -#Used by ChromeOS: -416 128 r 0 vbnv -#544 440 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/wtm2/devicetree.cb b/src/mainboard/intel/wtm2/devicetree.cb deleted file mode 100644 index 2790cb9..0000000 --- a/src/mainboard/intel/wtm2/devicetree.cb +++ /dev/null @@ -1,88 +0,0 @@ -chip northbridge/intel/haswell - - # Enable DisplayPort 1 Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DisplayPort 0 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Enable DVI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/haswell - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_battery" = "9" # ACPI(C2) = MWAIT(C7S) - register "c3_battery" = "12" # ACPI(C3) = MWAIT(C10) - - register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E) - register "c2_acpower" = "9" # ACPI(C2) = MWAIT(C7S) - register "c3_acpower" = "12" # ACPI(C3) = MWAIT(C10) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - - chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - register "alt_gp_smi_en" = "0x0000" - register "gpe0_en_1" = "0x00000400" - register "gpe0_en_2" = "0x00000000" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" - - register "ide_legacy_combined" = "0x0" - register "sata_ahci" = "0x1" - register "sata_port_map" = "0x2" - - register "sio_acpi_mode" = "1" - register "sio_i2c0_voltage" = "0" # 3.3V - register "sio_i2c1_voltage" = "0" # 3.3V - - device pci 13.0 on end # Smart Sound Audio DSP - device pci 14.0 on end # USB3 XHCI - device pci 15.0 on end # Serial I/O DMA - device pci 15.1 on end # I2C0 - device pci 15.2 on end # I2C1 - device pci 15.3 on end # GSPI0 - device pci 15.4 on end # GSPI1 - device pci 15.5 on end # UART0 - device pci 15.6 on end # UART1 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 17.0 on end # SDIO - device pci 19.0 on end # GbE - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 - device pci 1d.0 on end # USB2 EHCI - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on end # LPC bridge - device pci 1f.2 on end # SATA Controller - device pci 1f.3 on end # SMBus - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/intel/wtm2/dsdt.asl b/src/mainboard/intel/wtm2/dsdt.asl deleted file mode 100644 index 112a47a..0000000 --- a/src/mainboard/intel/wtm2/dsdt.asl +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define ENABLE_TPM - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include "acpi/thermal.asl" - - #include "../../../cpu/intel/haswell/acpi/cpu.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/haswell/acpi/haswell.asl> - #include <southbridge/intel/lynxpoint/acpi/pch.asl> - } - } - - #include "acpi/chromeos.asl" - #include <vendorcode/google/chromeos/acpi/chromeos.asl> - - /* Chipset specific sleep states */ - #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl> -} diff --git a/src/mainboard/intel/wtm2/fadt.c b/src/mainboard/intel/wtm2/fadt.c deleted file mode 100644 index 7afbbfa..0000000 --- a/src/mainboard/intel/wtm2/fadt.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/lynxpoint/pch.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = get_pmbase(); - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x80; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 32; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 0; - fadt->x_gpe0_blk.bit_width = 0; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = 0; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/intel/wtm2/gpio.h b/src/mainboard/intel/wtm2/gpio.h deleted file mode 100644 index 884fd66..0000000 --- a/src/mainboard/intel/wtm2/gpio.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef INTEL_WTM2_GPIO_H -#define INTEL_WTM2_GPIO_H - -#include "southbridge/intel/lynxpoint/lp_gpio.h" - -static const struct pch_lp_gpio_map mainboard_gpio_map[] = { - LP_GPIO_NATIVE, /* 0: LPSS_UART1_RXD */ - LP_GPIO_NATIVE, /* 1: LPSS_UART1_TXD */ - LP_GPIO_NATIVE, /* 2: LPSS_UART1_RTS_N_R */ - LP_GPIO_NATIVE, /* 3: LPSS_UART1_CTS_N */ - LP_GPIO_NATIVE, /* 4: LPSS_I2C0_SDA_R */ - LP_GPIO_NATIVE, /* 5: LPSS_I2C0_SCL */ - LP_GPIO_NATIVE, /* 6: LPSS_I2C1_SDA */ - LP_GPIO_NATIVE, /* 7: LPSS_I2C1_SCL */ - LP_GPIO_UNUSED, /* 8: NGFF_SLTA_WIFI_WAKE_N */ - LP_GPIO_UNUSED, /* 9: ACCEL_INT2_MCP */ - LP_GPIO_ACPI_SCI, /* 10: SMC_RUNTIME_SCI_N */ - LP_GPIO_UNUSED, /* 11: AMB_THRM_R_N */ - LP_GPIO_NATIVE, /* 12: PM_LANPHY_ENABLE */ - LP_GPIO_OUT_HIGH, /* 13: USB32_P0_PWREN */ - LP_GPIO_IRQ_EDGE, /* 14: SH_INT_ACCEL_DRDY_USB_INT_N */ - LP_GPIO_OUT_HIGH, /* 15: LAN_PWREN_N */ - LP_GPIO_OUT_HIGH, /* 16: LAN_RST_N */ - LP_GPIO_OUT_LOW, /* 17: CRIT_TEMP_REP_R_N */ - LP_GPIO_UNUSED, /* 18: TBT_FORCE_PWR */ - LP_GPIO_INPUT, /* 19: EC_IN_RW */ - LP_GPIO_NATIVE, /* 20: CK_REQ_P2_NGFFSLTA_N_R */ - LP_GPIO_NATIVE, /* 21: CK_PCIE_LAN_REQ_N */ - LP_GPIO_NATIVE, /* 22: CK_REQ_P4_TBT_N */ - LP_GPIO_NATIVE, /* 23: CK_REQ_P5_N */ - LP_GPIO_OUT_LOW, /* 24: ME_PG_LED */ - LP_GPIO_INPUT, /* 25: USB_WAKEOUT_N */ - LP_GPIO_IRQ_EDGE, /* 26: NFC_IRQ_MGP5 */ - LP_GPIO_ACPI_SCI, /* 27: SMC_WAKE_SCI_N */ - LP_GPIO_OUT_LOW, /* 28: PCH_NFC_RESET */ - LP_GPIO_NATIVE, /* 29: PCH_SLP_WLAN_N */ - LP_GPIO_NATIVE, /* 30: SUS_PWR_ACK_R */ - LP_GPIO_NATIVE, /* 31: AC_PRESENT_R */ - LP_GPIO_NATIVE, /* 32: PM_CKRUN_N */ - LP_GPIO_OUT_LOW, /* 33: SATA0_PHYSLP */ - LP_GPIO_INPUT, /* 34: ESATA_DET_N */ - LP_GPIO_INPUT, /* 35: SATA_DIRECT_PRSNT_R_N */ - LP_GPIO_INPUT, /* 36: NGFF_SSD_SATA2_PCIE1_DET_N */ - LP_GPIO_INPUT, /* 37: NGFF_SSD_SATA3_PCIE0_DET_N */ - LP_GPIO_OUT_LOW, /* 38: SATA1_PHYSLP_DIRECT */ - LP_GPIO_ACPI_SMI, /* 39: SMC_EXTSMI_N_R */ - LP_GPIO_NATIVE, /* 40: USB_OC_0_1_R_N */ - LP_GPIO_NATIVE, /* 41: USB_OC_2_6_R_N */ - LP_GPIO_INPUT, /* 42: TBT_CIO_PLUG_SMI_N_R */ - LP_GPIO_OUT_HIGH, /* 43: USB32_P1_PWREN */ - LP_GPIO_INPUT, /* 44: SENSOR_HUB_RST_N */ - LP_GPIO_INPUT, /* 45: GYRO_INT2_MCP_R */ - LP_GPIO_OUT_HIGH, /* 46: SNSR_HUB_PWREN */ - LP_GPIO_IRQ_EDGE, /* 47: SPI_TPM_HDR_IRQ_N */ - LP_GPIO_OUT_HIGH, /* 48: PCIE_TBT_RST_N */ - LP_GPIO_INPUT, /* 49: COMBO_JD */ - LP_GPIO_IRQ_EDGE, /* 50: TOUCH_PANEL_INTR_N */ - LP_GPIO_OUT_HIGH, /* 51: PCH_WIFI_RF_KILL_N */ - LP_GPIO_OUT_HIGH, /* 52: TOUCH_PNL_RST_N_R */ - LP_GPIO_INPUT, /* 53: SNSR_HUB_I2C_WAKE / ALS_INT_MCP */ - LP_GPIO_ACPI_SCI, /* 54: NGFF_SLTB_SSD_MC_WAKE_N */ - LP_GPIO_IRQ_EDGE, /* 55: TOUCHPAD_INTR_N */ - LP_GPIO_INPUT, /* 56: NGFF_SLTB_WWAN_SSD_DET1 */ - LP_GPIO_OUT_HIGH, /* 57: NGFF_SLTB_WWAN_PWREN */ - LP_GPIO_OUT_LOW, /* 58: SLATEMODE_HALLOUT_R */ - LP_GPIO_OUT_HIGH, /* 59: USB2_CAM_PWREN */ - LP_GPIO_OUT_LOW, /* 60: USB_CR_PWREN_N */ - LP_GPIO_NATIVE, /* 61: PM_SUS_STAT_N */ - LP_GPIO_NATIVE, /* 62: SUS_CK */ - LP_GPIO_NATIVE, /* 63: SLP_S5_R_N */ - LP_GPIO_NATIVE, /* 64: LPSS_SDIO_CLK_CMNHDR_R */ - LP_GPIO_NATIVE, /* 65: LPSS_SDIO_CMD_CMNHDR_R */ - LP_GPIO_NATIVE, /* 66: LPSS_SDIO_D0_CMNHDR_R */ - LP_GPIO_NATIVE, /* 67: LPSS_SDIO_D1_CMNHDR_R */ - LP_GPIO_NATIVE, /* 68: LPSS_SDIO_D2_CMNHDR_R */ - LP_GPIO_NATIVE, /* 69: LPSS_SDIO_D3_CMNHDR_R1 */ - LP_GPIO_NATIVE, /* 70: NGFF_SLTA_WIFI_PWREN_N_R */ - LP_GPIO_OUT_HIGH, /* 71: MPHY_PWREN */ - LP_GPIO_NATIVE, /* 72: PM_BATLOW_R_N */ - LP_GPIO_NATIVE, /* 73: PCH_NOT_N */ - LP_GPIO_NATIVE, /* 74: SML1_DATA */ - LP_GPIO_NATIVE, /* 75: SML1_CK */ - LP_GPIO_OUT_HIGH, /* 76: PCH_AUDIO_PWR_R */ - LP_GPIO_OUT_LOW, /* 77: PC_SLTB_SSD_RST_N_R */ - LP_GPIO_INPUT, /* 78: PM_EXTTS0_EC_N */ - LP_GPIO_IRQ_EDGE, /* 79: SIO1007_IRQ_N */ - LP_GPIO_INPUT, /* 80: PM_EXTTS1_R_N */ - LP_GPIO_NATIVE, /* 81: PCH_HDA_SPKR */ - LP_GPIO_NATIVE, /* 82: H_RCIN_N */ - LP_GPIO_NATIVE, /* 83: LPSS_GSPI0_CS_R_N */ - LP_GPIO_NATIVE, /* 84: LPSS_GSPI0_CLK_R */ - LP_GPIO_NATIVE, /* 85: LPSS_GSPI0_MISO_R */ - LP_GPIO_NATIVE, /* 86: LPSS_GSPI0_MOSI_BBS0_R */ - LP_GPIO_NATIVE, /* 87: LPSS_GSPI1_CS_R_N */ - LP_GPIO_NATIVE, /* 88: LPSS_GSPI1_CLK_R */ - LP_GPIO_NATIVE, /* 89: LPSS_GSPI1_MISO_R */ - LP_GPIO_OUT_LOW, /* 90: NGFF_SLTA_WIFI_RST_N */ - LP_GPIO_NATIVE, /* 91: LPSS_UART0_RXD */ - LP_GPIO_NATIVE, /* 92: LPSS_UART0_TXD */ - LP_GPIO_NATIVE, /* 93: LPSS_UART0_RTS_N */ - LP_GPIO_NATIVE, /* 94: LPSS_UART0_CTS_N */ - LP_GPIO_END -}; - -#endif diff --git a/src/mainboard/intel/wtm2/graphics.c b/src/mainboard/intel/wtm2/graphics.c deleted file mode 100644 index f0f2fcf..0000000 --- a/src/mainboard/intel/wtm2/graphics.c +++ /dev/null @@ -1,87 +0,0 @@ -/* -* This file is part of the coreboot project. -* -* Copyright 2013 Google Inc. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; version 2 of the License. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ -/* this file was for the most part machine generated, and in future - * will be all machine generated. Avoid editing. - */ -#include <console/console.h> -#include <device/i915.h> - -void graphics_register_reset(u32 aux_ctl, u32 aux_data, int verbose) -{ - - io_i915_write32(0x80000000,0x45400); - io_i915_write32(0x00000000,_CURACNTR); - io_i915_write32((/* PIPEA */0x0<<24)|0x00000000,_DSPACNTR); - io_i915_write32(0x00000000,_DSPBCNTR); - io_i915_write32(0x80000000,CPU_VGACNTRL); - io_i915_write32(0x00000000,_DSPASIZE+0xc); - io_i915_write32(0x00000000,_DSPBSURF); - io_i915_write32(0x00000000,0x4f050); - io_i915_write32( DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | - DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | - DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | - DP_SYNC_VS_HIGH |0x00000091,DP_A); - io_i915_write32(0x00200090,_FDI_RXA_MISC); - io_i915_write32(0x0a000000,_FDI_RXA_MISC); - /* not yet documented anywhere that we can find. */ - io_i915_write32(0x00000070,0x46408); - io_i915_write32(0x04000000,0x42090); - io_i915_write32(0x40000000,0x4f050); - io_i915_write32(0x00000000,0x9840); - io_i915_write32(0xa4000000,0x42090); - io_i915_write32(0x00004000,0x42080); - io_i915_write32(0x00ffffff,0x64f80); - io_i915_write32(0x0007000e,0x64f84); - io_i915_write32(0x00d75fff,0x64f88); - io_i915_write32(0x000f000a,0x64f8c); - io_i915_write32(0x00c30fff,0x64f90); - io_i915_write32(0x00060006,0x64f94); - io_i915_write32(0x00aaafff,0x64f98); - io_i915_write32(0x001e0000,0x64f9c); - io_i915_write32(0x00ffffff,0x64fa0); - io_i915_write32(0x000f000a,0x64fa4); - io_i915_write32(0x00d75fff,0x64fa8); - io_i915_write32(0x00160004,0x64fac); - io_i915_write32(0x00c30fff,0x64fb0); - io_i915_write32(0x001e0000,0x64fb4); - io_i915_write32(0x00ffffff,0x64fb8); - io_i915_write32(0x00060006,0x64fbc); - io_i915_write32(0x00d75fff,0x64fc0); - io_i915_write32(0x001e0000,0x64fc4); - io_i915_write32(0x00ffffff,0x64e00); - io_i915_write32(0x0006000e,0x64e04); - io_i915_write32(0x00d75fff,0x64e08); - io_i915_write32(0x0005000a,0x64e0c); - io_i915_write32(0x00c30fff,0x64e10); - io_i915_write32(0x00040006,0x64e14); - io_i915_write32(0x80aaafff,0x64e18); - io_i915_write32(0x000b0000,0x64e1c); - io_i915_write32(0x00ffffff,0x64e20); - io_i915_write32(0x0005000a,0x64e24); - io_i915_write32(0x00d75fff,0x64e28); - io_i915_write32(0x000c0004,0x64e2c); - io_i915_write32(0x80c30fff,0x64e30); - io_i915_write32(0x000b0000,0x64e34); - io_i915_write32(0x00ffffff,0x64e38); - io_i915_write32(0x00040006,0x64e3c); - io_i915_write32(0x80d75fff,0x64e40); - io_i915_write32(0x000b0000,0x64e44); - /* end not yet documented. */ - io_i915_write32(0x10000000,SDEISR+0x30); -} diff --git a/src/mainboard/intel/wtm2/hda_verb.c b/src/mainboard/intel/wtm2/hda_verb.c deleted file mode 100644 index c18e79b..0000000 --- a/src/mainboard/intel/wtm2/hda_verb.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10134210, // Codec Vendor / Device ID: Cirrus Logic CS4210 - 0x10134210, // Subsystem ID - 0x00000007, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x10134210 */ - AZALIA_SUBVENDOR(0x0, 0x10134210), - - /* Pin Widget Verb Table */ - - /* Pin Complex (NID 0x05) 1/8 Gray HP Out at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x05, 0x022120f0), - - /* Pin Complex (NID 0x06) Analog Unknown Speaker at Int N/A */ - AZALIA_PIN_CFG(0x0, 0x06, 0x90170010), - - /* Pin Complex (NID 0x07) 1/8 Grey Line In at Ext Front */ - AZALIA_PIN_CFG(0x0, 0x07, 0x02a120f0), - - /* Pin Complex (NID 0x08) Analog Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x08, 0x77a70037), - - /* Pin Complex (NID 0x09) Digital Unknown Mic at Oth Mobile-In */ - AZALIA_PIN_CFG(0x0, 0x09, 0x77a6003e), - - /* Pin Complex (NID 0x0a) Optical Black SPDIF Out at Ext N/A */ - AZALIA_PIN_CFG(0x0, 0x0a, 0x434510f0), - - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/wtm2/i915.c b/src/mainboard/intel/wtm2/i915.c deleted file mode 100644 index f542a13..0000000 --- a/src/mainboard/intel/wtm2/i915.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2013 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <stdlib.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <delay.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <smbios.h> -#include <device/pci.h> -#include <ec/google/chromeec/ec.h> -#include <cbfs_core.h> - -#include <cpu/x86/tsc.h> -#include <cpu/x86/cache.h> -#include <cpu/x86/mtrr.h> -#include <cpu/x86/msr.h> -#include <edid.h> -#include <device/i915.h> - -/* how many bytes do we need for the framebuffer? - * Well, this gets messy. To get an exact answer, we have - * to ask the panel, but we'd rather zero the memory - * and set up the gtt while the panel powers up. So, - * we take a reasonable guess, secure in the knowledge that the - * MRC has to overestimate the number of bytes used. - * 8 MiB is a very safe guess. There may be a better way later, but - * fact is, the initial framebuffer is only very temporary. And taking - * a little long is ok; this is done much faster than the AUX - * channel is ready for IO. - */ -#define FRAME_BUFFER_BYTES (8*MiB) -/* how many 4096-byte pages do we need for the framebuffer? - * There are hard ways to get this, and easy ways: - * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096 - * on this chip (and in fact every Intel graphics chip we've seen). - */ -#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096)) - -static int verbose = 0; - -static unsigned int *mmio; -static unsigned int graphics; -static unsigned short addrport; -static unsigned short dataport; -static unsigned int physbase; - -const u32 link_edid_data[] = { - 0xffffff00, 0x00ffffff, 0x0379e430, 0x00000000, - 0x04011500, 0x96121ba5, 0xa2d54f02, 0x26935259, - 0x00545017, 0x01010000, 0x01010101, 0x01010101, - 0x01010101, 0x6f6d0101, 0xa4a0a000, 0x20306031, - 0xb510003a, 0x19000010, 0x00000000, 0x00000000, - 0x00000000, 0x00000000, 0x00000000, 0x4c00fe00, - 0x69442047, 0x616c7073, 0x20200a79, 0xfe000000, - 0x31504c00, 0x45513932, 0x50532d31, 0x24003141, -}; - -static int ioread = 0, iowrite = 0; - -static char *regname(unsigned long addr) -{ - static char name[16]; - snprintf(name, sizeof (name), "0x%lx", addr); - return name; -} - -unsigned long io_i915_read32(unsigned long addr) -{ - unsigned long val; - outl(addr, addrport); - val = inl(dataport); - ioread += 2; - if (verbose & vio)printk(BIOS_SPEW, "%s: Got %08lx\n", regname(addr), val); - return val; -} - -void io_i915_write32(unsigned long val, unsigned long addr) -{ - if (verbose & vio)printk(BIOS_SPEW, "%s: outl %08lx\n", regname(addr), val); - outl(addr, addrport); - outl(val, dataport); - iowrite += 2; -} - -/* GTT is the Global Translation Table for the graphics pipeline. - * It is used to translate graphics addresses to physical - * memory addresses. As in the CPU, GTTs map 4K pages. - * The setgtt function adds a further bit of flexibility: - * it allows you to set a range (the first two parameters) to point - * to a physical address (third parameter);the physical address is - * incremented by a count (fourth parameter) for each GTT in the - * range. - * Why do it this way? For ultrafast startup, - * we can point all the GTT entries to point to one page, - * and set that page to 0s: - * memset(physbase, 0, 4096); - * setgtt(0, 4250, physbase, 0); - * this takes about 2 ms, and is a win because zeroing - * the page takes a up to 200 ms. - * This call sets the GTT to point to a linear range of pages - * starting at physbase. - */ - -static void -setgtt(int start, int end, unsigned long base, int inc) -{ - int i; - - for(i = start; i < end; i++){ - u32 word = base + i*inc; - io_i915_write32(word|1,(i*4)|1); - } -} - -static unsigned long tickspermicrosecond = 1795; -static unsigned long long globalstart; - -static unsigned long -microseconds(unsigned long long start, unsigned long long end) -{ - unsigned long ret; - ret = ((end - start)/tickspermicrosecond); - return ret; -} - -static unsigned long globalmicroseconds(void) -{ - return microseconds(globalstart, rdtscll()); -} - -static int i915_init_done = 0; - -int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio, - unsigned int gfx); - -int i915lightup(unsigned int pphysbase, unsigned int piobase, - unsigned int pmmio, unsigned int pgfx) -{ - int must_cycle_power = 0; - - /* frame buffer pointer */ - u32 *l; - int i; - unsigned long before_gtt, after_gtt; - - mmio = (void *)pmmio; - addrport = piobase; - dataport = addrport + 4; - physbase = pphysbase; - graphics = pgfx; - printk(BIOS_SPEW, - "i915lightup: graphics %p mmio %p" - "addrport %04x physbase %08x\n", - (void *)graphics, mmio, addrport, physbase); - globalstart = rdtscll(); - - /* turn it on. The VBIOS does it this way, so we hope that's ok. */ - verbose = 0; - io_i915_write32(0xabcd000f, PCH_PP_CONTROL); - - /* the AUX channel needs a small amount of time to spin up. - * Rather than udelay, do some useful work: - * Zero out the frame buffer memory, - * and set the global translation table (GTT) - */ - printk(BIOS_SPEW, "Set not-White (%08x) for %d pixels\n", 0xffffff, - FRAME_BUFFER_BYTES/sizeof(u32)); - for(l = (u32 *)graphics, i = 0; - i < FRAME_BUFFER_BYTES/sizeof(u32); i++){ - l[i] = 0x1122ff; - } - printk(BIOS_SPEW, "GTT: set %d pages starting at %p\n", - FRAME_BUFFER_PAGES, (void *)physbase); - before_gtt = globalmicroseconds(); - setgtt(0, FRAME_BUFFER_PAGES, physbase, 4096); - after_gtt = globalmicroseconds(); - - /* The reset is basically harmless, and can be - * repeated by the VBIOS in any event. - */ - - graphics_register_reset(DPA_AUX_CH_CTL, DPA_AUX_CH_DATA1, verbose); - - /* failures after this point can return without - * powering off the panel. - */ - - if (1) - goto fail; - /* failures after this point MUST power off the panel - * and wait 600 ms. - */ - - i915_init_done = 1; - return i915_init_done; - -fail: - printk(BIOS_SPEW, "Graphics could not be started;"); - if (must_cycle_power){ - printk(BIOS_SPEW, "Turn off power and wait ..."); - io_i915_write32(0xabcd0000, PCH_PP_CONTROL); - udelay(600000); - } - printk(BIOS_SPEW, "Returning.\n"); - return 0; - -} diff --git a/src/mainboard/intel/wtm2/intel_dp.c b/src/mainboard/intel/wtm2/intel_dp.c deleted file mode 100644 index e7222a3..0000000 --- a/src/mainboard/intel/wtm2/intel_dp.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Copyright 2013 Google Inc. - * Copyright © 2008 Intel Corporation - * - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - * - * Authors: - * Keith Packard keithp@keithp.com - * - */ - -#include <console/console.h> -#include <stdint.h> -#include <delay.h> -#include <device/i915.h> - -u32 -pack_aux(u32 *src32, int src_bytes) -{ - u8 *src = (u8 *)src32; - int i; - u32 v = 0; - - if (src_bytes > 4) - src_bytes = 4; - for (i = 0; i < src_bytes; i++) - v |= ((u32) src[i]) << ((3-i) * 8); - return v; -} - -void -unpack_aux(u32 src, u8 *dst, int dst_bytes) -{ - - int i; - if (dst_bytes > 4) - dst_bytes = 4; - for (i = 0; i < dst_bytes; i++) - dst[i] = src >> ((3-i) * 8); -} - -int -intel_dp_aux_ch(u32 ch_ctl, u32 ch_data, u32 *send, int send_bytes, - u8 *recv, int recv_size) -{ - int i; - int recv_bytes; - u32 status; - u32 aux_clock_divider; - int try, precharge = 5; - - /* The clock divider is based off the hrawclk, - * and would like to run at 2MHz. So, take the - * hrawclk value and divide by 2 and use that - * - * Note that PCH attached eDP panels should use a 125MHz input - * clock divider. - */ - /* 200 on link */ - aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */ - - /* Try to wait for any previous AUX channel activity */ - for (try = 0; try < 3; try++) { - status = io_i915_read32(ch_ctl); - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) - break; - udelay(1000); - } - - if (try == 3) { - printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); - status = io_i915_read32(ch_ctl); - printk(BIOS_SPEW, "dp_aux_ch not started status 0x%08x\n", - status); - return -1; - } - - /* Must try at least 3 times according to DP spec */ - for (try = 0; try < 5; try++) { - /* Load the send data into the aux channel data registers */ - for (i = 0; i < send_bytes; i += 4) - io_i915_write32(send[i], ch_data + i); - - /* Send the command and wait for it to complete */ - io_i915_write32( - DP_AUX_CH_CTL_SEND_BUSY | - DP_AUX_CH_CTL_TIME_OUT_400us | - (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | - (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); - for (;;) { - status = io_i915_read32(ch_ctl); - if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) - break; - udelay(100); - } - - /* Clear done status and any errors */ - io_i915_write32( - status | - DP_AUX_CH_CTL_DONE | - DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR, ch_ctl); - - if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR | - DP_AUX_CH_CTL_RECEIVE_ERROR)) - continue; - if (status & DP_AUX_CH_CTL_DONE) - break; - } - - if ((status & DP_AUX_CH_CTL_DONE) == 0) { - printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); - printk(BIOS_SPEW, "dp_aux_ch not done status 0x%08x\n", status); - return -1; - } - - /* Check for timeout or receive error. - * Timeouts occur when the sink is not connected - */ - if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { - printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); - printk(BIOS_SPEW, "dp_aux_ch receive error status 0x%08x\n", status); - return -1; - } - - /* Timeouts occur when the device isn't connected, so they're - * "normal" -- don't fill the kernel log with these */ - if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { - printk(BIOS_SPEW, "[000000.0] [drm:%s], ", __func__); - printk(BIOS_SPEW, "dp_aux_ch timeout status 0x%08x\n", status); - return -1; - } - - /* Unload any bytes sent back from the other side */ - recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> - DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); - if (recv_bytes > recv_size) - recv_bytes = recv_size; - - for (i = 0; i < recv_bytes; i += 4) - unpack_aux(io_i915_read32(ch_data + i), - recv + i, recv_bytes - i); - - return recv_bytes; -} diff --git a/src/mainboard/intel/wtm2/mainboard.c b/src/mainboard/intel/wtm2/mainboard.c deleted file mode 100644 index a6839fc..0000000 --- a/src/mainboard/intel/wtm2/mainboard.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/lynxpoint/pch.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/wtm2/mainboard_smi.c b/src/mainboard/intel/wtm2/mainboard_smi.c deleted file mode 100644 index bcc94d6..0000000 --- a/src/mainboard/intel/wtm2/mainboard_smi.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/lynxpoint/nvs.h> -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/me.h> -#include <northbridge/intel/haswell/haswell.h> -#include <cpu/intel/haswell/haswell.h> - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - smm_get_gnvs()->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -#define APMC_FINALIZE 0xcb - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APMC_FINALIZE: - if (mainboard_finalized) { - printk(BIOS_DEBUG, "SMI#: Already finalized\n"); - return 0; - } - - intel_pch_finalize_smm(); - intel_northbridge_haswell_finalize_smm(); - intel_cpu_haswell_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/intel/wtm2/romstage.c b/src/mainboard/intel/wtm2/romstage.c deleted file mode 100644 index b831244..0000000 --- a/src/mainboard/intel/wtm2/romstage.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stddef.h> -#include <console/console.h> -#include "cpu/intel/haswell/haswell.h" -#include "northbridge/intel/haswell/haswell.h" -#include "northbridge/intel/haswell/raminit.h" -#include "southbridge/intel/lynxpoint/pch.h" -#include "southbridge/intel/lynxpoint/lp_gpio.h" -#include "gpio.h" - -const struct rcba_config_instruction rcba_config[] = { - - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P4IP ETH0 INTB -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D20IP_XHCI XHCI INTA -> PIRQA - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQH - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), - RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), - RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP)), - RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), - RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), - RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)), - RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), - RCBA_SET_REG_32(D20IR, (INTA << D20IP_XHCI)), - - /* Device interrupt route registers */ - RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)), - RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)), - RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)), - RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)), - RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)), - RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)), - RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQA, 0, 0, 0)), - - /* Disable unused devices (board specific) */ - RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), - - RCBA_END_CONFIG, -}; - -void mainboard_romstage_entry(unsigned long bist) -{ - struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = DEFAULT_MCHBAR, - .dmibar = DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = DEFAULT_PCIEXBAR, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xa2, 0x00, 0xa2, 0x00 }, - .ec_present = 1, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 2, - .dimm_channel1_disabled = 2, - .max_ddr3_freq = 1600, - .usb2_ports = { - /* Length, Enable, OCn# */ - { 0x40, 1, USB_OC_PIN_SKIP, /* P0: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P1: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P2: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P3: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P4: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P5: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 1, USB_OC_PIN_SKIP, /* P6: */ - USB_PORT_FRONT_PANEL }, - { 0x40, 0, USB_OC_PIN_SKIP, /* P7: */ - USB_PORT_FRONT_PANEL }, - }, - .usb3_ports = { - /* Enable, OCn# */ - { 1, USB_OC_PIN_SKIP }, /* P1; */ - { 1, USB_OC_PIN_SKIP }, /* P2; */ - { 1, USB_OC_PIN_SKIP }, /* P3; */ - { 1, USB_OC_PIN_SKIP }, /* P4; */ - }, - }; - - struct romstage_params romstage_params = { - .pei_data = &pei_data, - .gpio_map = &mainboard_gpio_map, - .rcba_config = &rcba_config[0], - .bist = bist, - .copy_spd = NULL, - }; - - /* Call into the real romstage main with this board's attributes. */ - romstage_common(&romstage_params); -} diff --git a/src/mainboard/intel/wtm2/thermal.h b/src/mainboard/intel/wtm2/thermal.h deleted file mode 100644 index e6116b6..0000000 --- a/src/mainboard/intel/wtm2/thermal.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef WTM2_THERMAL_H -#define WTM2_THERMAL_H - -/* Fan is OFF */ -#define FAN4_THRESHOLD_OFF 0 -#define FAN4_THRESHOLD_ON 0 -#define FAN4_PWM 0x00 - -/* Fan is at LOW speed */ -#define FAN3_THRESHOLD_OFF 48 -#define FAN3_THRESHOLD_ON 55 -#define FAN3_PWM 0x40 - -/* Fan is at MEDIUM speed */ -#define FAN2_THRESHOLD_OFF 52 -#define FAN2_THRESHOLD_ON 64 -#define FAN2_PWM 0x80 - -/* Fan is at HIGH speed */ -#define FAN1_THRESHOLD_OFF 60 -#define FAN1_THRESHOLD_ON 68 -#define FAN1_PWM 0xb0 - -/* Fan is at FULL speed */ -#define FAN0_THRESHOLD_OFF 66 -#define FAN0_THRESHOLD_ON 78 -#define FAN0_PWM 0xff - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 100 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 90 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/mainboard/iwave/Kconfig b/src/mainboard/iwave/Kconfig index 9bd2c11..753dcc0 100644 --- a/src/mainboard/iwave/Kconfig +++ b/src/mainboard/iwave/Kconfig @@ -5,11 +5,11 @@ choice depends on VENDOR_IWAVE
config BOARD_IWAVE_RAINBOW_G6 - bool "iWRainbowG6" + bool "iwrainbowg6"
endchoice
-source "src/mainboard/iwave/iWRainbowG6/Kconfig" +source "src/mainboard/iwave/iwrainbowg6/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/iwave/iWRainbowG6/Kconfig b/src/mainboard/iwave/iWRainbowG6/Kconfig deleted file mode 100644 index e9ecede..0000000 --- a/src/mainboard/iwave/iWRainbowG6/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -if BOARD_IWAVE_RAINBOW_G6 - -# TODO: move options to chipset components as appropriate -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_441 - select NORTHBRIDGE_INTEL_SCH - select SOUTHBRIDGE_INTEL_SCH - select HAVE_PIRQ_TABLE -# select HAVE_MP_TABLE - select USE_PRINTK_IN_CAR - select UDELAY_LAPIC - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select BROKEN_CAR_MIGRATE - -config MAINBOARD_DIR - string - default iwave/iWRainbowG6 - -config MAINBOARD_PART_NUMBER - string - default "iWRainbowG6" - -config MMCONF_BASE_ADDRESS - hex - default 0xe0000000 - -config IRQ_SLOT_COUNT - int - default 10 - -# This mainboard might have a higher clocked UART or might not be able to run -# serial output at 115200 baud - -endif diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl b/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl deleted file mode 100644 index c3d6ff9..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* Intel Core (2) Duo CPU node support - * - * Note: The ACPI P_BLK on the ICH7 (and probably others) lives at - * PMBASE + 0x10, and it's 0x06 bytes long. On ICH8 it's 8 bytes. - * - * The second CPU core does not need its own P_BLK. - */ - -Scope(_PR) -{ - Processor( - CPU1, // name of cpu/core 0 - 1, // numeric id of cpu/core - 0x510, // ACPI P_BLK base address - 6 // ACPI P_BLK size - ) - { - // TODO: _PDT - } - - Processor( - CPU2, // name of cpu/core 1 - 2, // numeric id of cpu/core 1 - 0, // ACPI P_BLK base address - 0) // ACPI P_BLK size - { - // TODO: _PDT - } -} // End _PR diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl b/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl deleted file mode 100644 index 680f6cb..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device(EC0) -{ - Name (_HID, EISAID("PNP0C09")) - Name (_UID, 1) - - Method (_CRS, 0) - { - Name (ECMD, ResourceTemplate() - { - IO (Decode16, 0x62, 0x62, 0, 1) - IO (Decode16, 0x66, 0x66, 0, 1) - }) - - Return (ECMD) - } - - Method (_REG, 2) - { - // This method is needed by Windows XP/2000 - // for EC initialization before a driver - // is loaded - } - - Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI - - // TODO EC Query methods - - // TODO Scope _SB devices for AC power, LID, Power button - -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl b/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl deleted file mode 100644 index cd1fed5..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * i945 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, 0, 16 }, - Package() { 0x0001ffff, 1, 0, 17 }, - Package() { 0x0001ffff, 2, 0, 18 }, - Package() { 0x0001ffff, 3, 0, 19 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - Package() { 0x001cffff, 1, 0, 17 }, - Package() { 0x001cffff, 2, 0, 18 }, - Package() { 0x001cffff, 3, 0, 19 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, 0, 23 }, - Package() { 0x001dffff, 1, 0, 19 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 16 }, - // AC97/IDE 0:1e.2, 0:1e.3 - Package() { 0x001effff, 0, 0, 17 }, - Package() { 0x001effff, 1, 0, 20 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 19}, - }) - } Else { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - // AC97/IDE 0:1e.2, 0:1e.3 - Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - }) - } -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl b/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl deleted file mode 100644 index cd1593d..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl +++ /dev/null @@ -1,92 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - //Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // Call a trap so SMI can prepare for Sleep as well. - // TRAP(0x55) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - Return(Package(){0,0}) -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl b/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl deleted file mode 100644 index cdcdb75..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Name(_S0, Package(4){0x0,0x0,0,0}) -Name(_S1, Package(4){0x1,0x0,0,0}) -Name(_S3, Package(4){0x5,0x0,0,0}) -Name(_S4, Package(4){0x6,0x0,0,0}) -Name(_S5, Package(4){0x7,0x0,0,0}) diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl b/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl deleted file mode 100644 index d702c99..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH7 - */ - -If (PICM) { - Return (Package() { - Package() { 0x0000ffff, 0, 0, 16}, - - Package() { 0x0001ffff, 0, 0, 20}, - Package() { 0x0001ffff, 1, 0, 21}, - Package() { 0x0001ffff, 2, 0, 22}, - Package() { 0x0001ffff, 3, 0, 23}, - - Package() { 0x0002ffff, 0, 0, 21}, - Package() { 0x0002ffff, 1, 0, 22}, - Package() { 0x0002ffff, 2, 0, 23}, - Package() { 0x0002ffff, 3, 0, 20}, - - Package() { 0x0003ffff, 0, 0, 22}, - Package() { 0x0003ffff, 1, 0, 23}, - Package() { 0x0003ffff, 2, 0, 20}, - Package() { 0x0003ffff, 3, 0, 21}, - - Package() { 0x0004ffff, 0, 0, 23}, - Package() { 0x0004ffff, 1, 0, 20}, - Package() { 0x0004ffff, 2, 0, 21}, - Package() { 0x0004ffff, 3, 0, 22}, - - Package() { 0x0005ffff, 0, 0, 19}, - Package() { 0x0005ffff, 1, 0, 18}, - Package() { 0x0005ffff, 2, 0, 17}, - Package() { 0x0005ffff, 3, 0, 16}, - - Package() { 0x0006ffff, 0, 0, 18}, - Package() { 0x0006ffff, 1, 0, 17}, - Package() { 0x0006ffff, 2, 0, 16}, - Package() { 0x0006ffff, 3, 0, 19}, - - Package() { 0x0009ffff, 0, 0, 21}, - Package() { 0x0009ffff, 1, 0, 22}, - Package() { 0x0009ffff, 2, 0, 23}, - Package() { 0x0009ffff, 3, 0, 20}, - }) -} Else { - Return (Package() { - Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, - - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKH, 0}, - - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, - - Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKF, 0}, - - Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKG, 0}, - - Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKD, 0}, - Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, - - Package() { 0x0006ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0006ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0006ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0006ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, - - Package() { 0x0009ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0009ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0009ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0009ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, - }) -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl b/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl deleted file mode 100644 index b11f740..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - - -Device (SIO1) -{ - Name (_HID, EISAID("PNP0A05")) - Name (_UID, 1) - - Device (UAR1) - { - Name(_HID, EISAID("PNP0501")) - Name(_UID, 1) - - // Some methods need an implementation here: - // missing: _STA, _DIS, _CRS, _PRS, - // missing: _SRS, _PS0, _PS3 - } - - Device (UAR2) - { - Name(_HID, EISAID("PNP0501")) - Name(_UID, 2) - - // Some methods need an implementation here: - // missing: _STA, _DIS, _CRS, _PRS, - // missing: _SRS, _PS0, _PS3 - } -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl b/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl deleted file mode 100644 index 5330309..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - - // FIXME these could/should be read from the - // GNVS area, so they can be controlled by - // coreboot - Name(TC1V, 0x04) - Name(TC2V, 0x03) - Name(TSPV, 0x64) - - // At which temperature should the OS start - // active cooling? - Method (_AC0, 0, Serialized) - { - Return (0xf5c) // Value for Rocky - } - - // Method (_AC1, 0, Serialized) - // { - // Return (0xf5c) - // } - - // Critical shutdown temperature - Method (_CRT, 0, Serialized) - { - Return (Add (0x0aac, 0x50)) // FIXME - } - - // CPU throttling start temperature - Method (_PSV, 0, Serialized) - { - Return (0xaaf) // FIXME - } - - // Get DTS Temperature - Method (_TMP, 0, Serialized) - { - Return (0xaac) // FIXME - } - - // Processors used for active cooling - Method (_PSL, 0, Serialized) - { - If (MPEN) { - Return (Package() {_PR.CPU1, _PR.CPU2}) - } - Return (Package() {_PR.CPU1}) - } - - // TC1 value for passive cooling - Method (_TC1, 0, Serialized) - { - Return (TC1V) - } - - // TC2 value for passive cooling - Method (_TC2, 0, Serialized) - { - Return (TC2V) - } - - // Sampling period for passive cooling - Method (_TSP, 0, Serialized) - { - Return (TSPV) - } - - - } -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/video.asl b/src/mainboard/iwave/iWRainbowG6/acpi/video.asl deleted file mode 100644 index 3536913..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi/video.asl +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// Brightness write -Method (BRTW, 1, Serialized) -{ - // TODO -} - -// Hot Key Display Switch -Method (HKDS, 1, Serialized) -{ - // TODO -} - -// Lid Switch Display Switch -Method (LSDS, 1, Serialized) -{ - // TODO -} - -// Brightness Notification -Method(BRTN,1,Serialized) -{ - // TODO (no displays defined yet) -} diff --git a/src/mainboard/iwave/iWRainbowG6/acpi_tables.c b/src/mainboard/iwave/iWRainbowG6/acpi_tables.c deleted file mode 100644 index 4dcda79..0000000 --- a/src/mainboard/iwave/iWRainbowG6/acpi_tables.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> - -#include "southbridge/intel/sch/nvs.h" - -void acpi_create_gnvs(global_nvs_t * gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing. */ - - /* Enable both COM ports. */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays. */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, - MP_IRQ_TRIGGER_LEVEL | - MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented. */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/iwave/iWRainbowG6/board_info.txt b/src/mainboard/iwave/iWRainbowG6/board_info.txt deleted file mode 100644 index ad25a93..0000000 --- a/src/mainboard/iwave/iWRainbowG6/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: iW-RainboW-G6 -Category: half -Board URL: http://www.iwavesystems.com/iW-RainbowG6.htm diff --git a/src/mainboard/iwave/iWRainbowG6/cmos.layout b/src/mainboard/iwave/iWRainbowG6/cmos.layout deleted file mode 100644 index 0e15662..0000000 --- a/src/mainboard/iwave/iWRainbowG6/cmos.layout +++ /dev/null @@ -1,147 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2009 coresystems GmbH -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -#928 40 r 0 unused - -968 1 e 2 ethernet1 -969 1 e 2 ethernet2 -970 1 e 2 ethernet3 - -#971 13 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ram initialization internal data -1024 8 r 0 C0WL0REOST -1032 8 r 0 C1WL0REOST -1040 8 r 0 RCVENMT -1048 4 r 0 C0DRT1 -1052 4 r 0 C1DRT1 - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/iwave/iWRainbowG6/devicetree.cb b/src/mainboard/iwave/iWRainbowG6/devicetree.cb deleted file mode 100644 index 84cfc4b..0000000 --- a/src/mainboard/iwave/iWRainbowG6/devicetree.cb +++ /dev/null @@ -1,39 +0,0 @@ -chip northbridge/intel/sch - - device cpu_cluster 0 on - chip cpu/intel/socket_441 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # Integrated Graphics and Video Device - - chip southbridge/intel/sch - register "pirqa_routing" = "0xa" - register "pirqb_routing" = "0xb" - register "pirqc_routing" = "0x5" - register "pirqd_routing" = "0xf" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - device pci 1a.0 on end # 26 0 USB Client - device pci 1b.0 on end # 27 0 HD Audio Controller - device pci 1c.0 on end # 28 0 PCI Express Port 1 - device pci 1c.1 on end # 28 1 PCI Express Port 2 - device pci 1d.0 on end # USB Classic UHCI Controller 1 - device pci 1d.1 on end # USB Classic UHCI Controller 2 - device pci 1d.2 on end # USB Classic UHCI Controller 3 - device pci 1d.7 on end # USB2 EHCI Controller - device pci 1e.0 on end # SDIO/MMC Port 0 - device pci 1e.1 on end # SDIO/MMC Port 1 - device pci 1e.2 on end # SDIO/MMC Port 2 - device pci 1f.0 on end # LPC bridge - device pci 1f.1 on end # PATA Controller - end - end -end - diff --git a/src/mainboard/iwave/iWRainbowG6/dsdt.asl b/src/mainboard/iwave/iWRainbowG6/dsdt.asl deleted file mode 100644 index 6b95127..0000000 --- a/src/mainboard/iwave/iWRainbowG6/dsdt.asl +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv2", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/sch/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - //#include "acpi/thermal.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sch/acpi/sch.asl> - #include <southbridge/intel/sch/acpi/sch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/sch/acpi/sleepstates.asl> -} diff --git a/src/mainboard/iwave/iWRainbowG6/fadt.c b/src/mainboard/iwave/iWRainbowG6/fadt.c deleted file mode 100644 index 8111672..0000000 --- a/src/mainboard/iwave/iWRainbowG6/fadt.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - 0x40) & 0xfffe; - - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long)facs; - fadt->dsdt = (unsigned long)dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = APM_CNT_PST_CONTROL; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x20; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x28; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0) - fadt->pm2_cnt_len = 2; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = APM_CNT_CST_CONTROL; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 85; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 0; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = 0x03; - - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x28; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, header->length); -} diff --git a/src/mainboard/iwave/iWRainbowG6/hda_verb.c b/src/mainboard/iwave/iWRainbowG6/hda_verb.c deleted file mode 100644 index 4cb2c9f..0000000 --- a/src/mainboard/iwave/iWRainbowG6/hda_verb.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009-2010 iWave Systems - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static u32 mainboard_cim_verb_data[] = { - /* coreboot specific header */ - 0x111d76d5, // Codec Vendor / Device ID: IDT 92HD81 - 0x00000000, // Subsystem ID - 0x0000000a, // Number of jacks - - /* NID 0x0a, Port A (capless headphone) */ - 0x0A71C40, - 0x0A71D10, - 0x0A71EA1, - 0x0A71F02, - - /* NID 0x0b, Port B (capless headphone) */ - 0x0B71C1F, - 0x0B71D10, - 0x0B71E21, - 0x0B71F02, - - /* - * NID 0x0c, Port C (Line IN/OUT+MIC for YD/UA revisions, and - * Line IN+MIC for TA revision) - */ - 0x0C71CF0, - 0x0C71D00, - 0x0C71E00, - 0x0C71F40, - - /* NID 0x0d, Port D (BTL output - EAPD control) */ - 0x0D71C10, - 0x0D71D41, - 0x0D71E10, - 0x0D71F10, - - /* NID 0x0e, Port E (Line IN/OUT) */ - 0x0E71CF0, - 0x0E71D00, - 0x0E71E00, - 0x0E71F40, - - /* NID 0x0f, Port F (Line IN/OUT, MIC) */ - 0x0F71CF0, - 0x0F71D00, - 0x0F71E00, - 0x0F71F40, - - /* NID 0x10, MonoOut (output-only) */ - 0x1071CF0, - 0x1071D00, - 0x1071EF0, - 0x1071F40, - - /* NID 0x10, DigMic0 (Digital Microphone 0) */ - 0x1171CF0, - 0x1171D00, - 0x1171E00, - 0x1171F40, - - /* NID 0x1f, Dig0Pin (First Digital Output Pin) */ - 0x1F71C50, - 0x1F71D21, - 0x1F71E40, - 0x1F71F10, - - /* NID 0x20, Dig1Pin (Second Digital Output Pin / DMIC Input Pin) */ - 0x2071CF0, - 0x2071D00, - 0x2071E00, - 0x2071F40, - - /* BTL Gain */ - 0x017F417, /* Gain = 16.79dB */ -}; -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/iwave/iWRainbowG6/irq_tables.c b/src/mainboard/iwave/iWRainbowG6/irq_tables.c deleted file mode 100644 index 940ff52..0000000 --- a/src/mainboard/iwave/iWRainbowG6/irq_tables.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x8119, /* Device*/ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xdf, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x02 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x00, (0x1e << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x00, (0x1f << 3) | 0x0, {{0x62, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x00, (0x1a << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x00, (0x1d << 3) | 0x0, {{0x64, 0x8200}, {0x65, 0x8200}, {0x66, 0x8200}, {0x67, 0x8200}}, 0x0, 0x0}, - {0x00, (0x1b << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x00, (0x1c << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x01, (0x00 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - {0x02, (0x00 << 3) | 0x0, {{0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x63, 0x5cb8}, {0x60, 0x5cb8}}, 0x2, 0x0}, - {0x00, (0x00 << 3) | 0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/iwave/iWRainbowG6/mainboard.c b/src/mainboard/iwave/iWRainbowG6/mainboard.c deleted file mode 100644 index dfc6636..0000000 --- a/src/mainboard/iwave/iWRainbowG6/mainboard.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009-2010 iWave Systems - * Copyright (C) 2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <console/console.h> - - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/iwave/iWRainbowG6/mptable.c b/src/mainboard/iwave/iWRainbowG6/mptable.c deleted file mode 100644 index 87de022..0000000 --- a/src/mainboard/iwave/iWRainbowG6/mptable.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &isa_bus); - - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - { - device_t dev; - struct resource *res; - dev = dev_find_slot(1, PCI_DEVFN(0x1e,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 3, 0x20, res->base); - } - } - dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 4, 0x20, res->base); - } - } - dev = dev_find_slot(4, PCI_DEVFN(0x1e,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 5, 0x20, res->base); - } - } - dev = dev_find_slot(4, PCI_DEVFN(0x1c,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 8, 0x20, res->base); - } - } - } -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x1, 0x1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x3, 0x1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x4, 0x1, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x6, 0x1, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x7, 0x1, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x1, 0x8, 0x1, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x9, 0x1, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xc, 0x1, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xd, 0x1, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xe, 0x1, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x1, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x1, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x1, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x1, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x1, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x1, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x78, 0x1, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x79, 0x1, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7a, 0x1, 0x12); -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, isa_bus); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/iwave/iWRainbowG6/romstage.c b/src/mainboard/iwave/iWRainbowG6/romstage.c deleted file mode 100644 index 00d4a38..0000000 --- a/src/mainboard/iwave/iWRainbowG6/romstage.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009-2010 iWave Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/cache.h> -#include <arch/cpu.h> -#include <console/console.h> -#if 0 -#include "ram/ramtest.c" -#include "southbridge/intel/sch/early_smbus.c" -#endif - -#define RFID_TEST 0 - -#if RFID_TEST -#define RFID_ADDR 0xA0 -#define RFID_SELECT_CARD_COMMAND 0x01 -#define SELECT_COMMAND_LENGTH 0x01 - -#define SMBUS_BASE_ADDRESS 0x400 - -static u32 sch_SMbase_read(void) -{ - u32 SMBusBase; - - /* SMBus address */ - SMBusBase = pci_read_config32(PCI_DEV(0, 0x1f, 0), 0x40); - SMBusBase &= 0xFFFF; - printk(BIOS_DEBUG, "SMBus base = %x\r\n", SMBusBase); - return SMBusBase; -} - -static void sch_SMbase_init(void) -{ - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - outb(0x3F, SMBusBase + SMBCLKDIV); -} - -static void sch_SMbus_regs(void) -{ - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - printk(BIOS_DEBUG, "SMBHSTCNT. =%x\r\n", inb(SMBusBase + SMBHSTCNT)); - printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", inb(SMBusBase + SMBHSTSTS)); - printk(BIOS_DEBUG, "SMBCLKDIV. =%x\r\n", inb(SMBusBase + SMBCLKDIV)); - - printk(BIOS_DEBUG, "SMBHSTADD. =%x\r\n", inb(SMBusBase + SMBHSTADD)); - printk(BIOS_DEBUG, "SMBHSTCMD. =%x\r\n", inb(SMBusBase + SMBHSTCMD)); -} - -void smb_clear(void) -{ - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - outb(0x00, SMBusBase + SMBHSTCNT); - outb(0x07, SMBusBase + SMBHSTSTS); -} - -void data_clear(void) -{ - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - outb(0x00, SMBusBase + SMBHSTDAT0); - outb(0x00, SMBusBase + SMBHSTCMD); - outb(0x00, SMBusBase + SMBHSTDAT1); - outb(0x00, SMBusBase + SMBHSTDATB); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x1)); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x2)); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x3)); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x4)); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x5)); - outb(0x00, SMBusBase + (SMBHSTDATB + 0x6)); -} - -void transaction1(unsigned char dev_addr) -{ - int temp, a; - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - printk(BIOS_DEBUG, "Transaction 1"); - //clear the control and status registers - smb_clear(); - //clear the data register - data_clear(); - //program TSA register - outb(dev_addr, SMBusBase + SMBHSTADD); - //program command register - outb(0x04, SMBusBase + SMBHSTCMD); - //write data register - outb(0x04, SMBusBase + SMBHSTDAT0); - outb(0x04, SMBusBase + SMBHSTDATB); - - outb(0x09, SMBusBase + (SMBHSTDATB + 0x1)); - outb(0x11, SMBusBase + (SMBHSTDATB + 0x2)); - outb(0x22, SMBusBase + (SMBHSTDATB + 0x3)); - - //set the control register - outb(0x15, SMBusBase + SMBHSTCNT); - //check the status register for busy state - //sch_SMbus_regs (); - temp = inb(SMBusBase + SMBHSTSTS); - //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); - //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); - do { - temp = inb(SMBusBase + SMBHSTSTS); - printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp); - //sch_SMbus_regs (); - printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", - inb(SMBusBase + SMBHSTSTS)); - if (temp > 0) - break; - } while (1); - - switch (temp) { - case 1: - printk(BIOS_DEBUG, "SMBus Success"); - break; - default: - printk(BIOS_DEBUG, "SMBus error %d", temp); - break; - - } - sch_SMbus_regs(); - printk(BIOS_DEBUG, "Command in TRansaction 1=%x\r\n\n", - inb(SMBusBase + SMBHSTCMD)); -} - -void transaction2(unsigned char dev_addr) -{ - int temp, a; - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - printk(BIOS_DEBUG, "Transaction 2"); - //clear the control and status registers - smb_clear(); - //clear the data register - data_clear(); - //program TSA register - outb(dev_addr, SMBusBase + SMBHSTADD); - //program command register - outb(0x03, SMBusBase + SMBHSTCMD); - //write data register - outb(0x02, SMBusBase + SMBHSTDAT0); - outb(0x03, SMBusBase + SMBHSTDATB); - outb(0x09, SMBusBase + (SMBHSTDATB + 0x1)); - outb(0x15, SMBusBase + SMBHSTCNT); - //check the status register for busy state - //sch_SMbus_regs (); - temp = inb(SMBusBase + SMBHSTSTS); - //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); - //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); - do { - temp = inb(SMBusBase + SMBHSTSTS); - printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp); - //sch_SMbus_regs (); - printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", - inb(SMBusBase + SMBHSTSTS)); - if (temp > 0) - break; - } while (1); - - switch (temp) { - case 1: - printk(BIOS_DEBUG, "SMBus Success"); - break; - default: - printk(BIOS_DEBUG, "SMBus error %d", temp); - break; - - } - sch_SMbus_regs(); - - printk(BIOS_DEBUG, "Command in TRansaction 2=%x\r\n\n", - inb(SMBusBase + SMBHSTCMD)); -} - -void transaction3(unsigned char dev_addr) -{ - int temp, index, length; - u32 SMBusBase; - - SMBusBase = sch_SMbase_read(); - printk(BIOS_DEBUG, "smb_read_multiple_bytes"); - smb_clear(); - data_clear(); - outb(dev_addr, SMBusBase + SMBHSTADD); - outb(0x03, SMBusBase + SMBHSTCMD); - outb(0x11, SMBusBase + SMBHSTCNT); - - //data_clear(); - outb(dev_addr + 1, SMBusBase + SMBHSTADD); - - outb(0x15, SMBusBase + SMBHSTCNT); - - // sch_SMbus_regs (); - //check the status register for busy state - //temp=inb(SMBusBase+SMBHSTSTS); - //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); - //sch_SMbus_regs (); - //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); - do { - temp = inb(SMBusBase + SMBHSTSTS); - printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", - inb(SMBusBase + SMBHSTSTS)); - //sch_SMbus_regs (); - if (temp > 0) - break; - } while (1); - - switch (temp) { - case 1: - printk(BIOS_DEBUG, "SMBus Success\n"); - break; - default: - printk(BIOS_DEBUG, "SMBus error %d", temp); - break; - - } - - sch_SMbus_regs(); - printk(BIOS_DEBUG, "ADDRESS is.. %x\r\n", inb(SMBusBase + SMBHSTADD)); - length = inb(SMBusBase + SMBHSTDAT0); - - printk(BIOS_DEBUG, "Length is.. %x\r\n", inb(SMBusBase + SMBHSTDAT0)); - - printk(BIOS_DEBUG, "Command is... %x\r\n", inb(SMBusBase + SMBHSTDATB)); - printk(BIOS_DEBUG, "Status .. %x\r\n", inb(SMBusBase + SMBHSTDATB + 1)); - for (index = 0; index < length; index++) - printk(BIOS_DEBUG, "Serial Byte[%x]..%x\r\n", index, - inb(SMBusBase + SMBHSTDATB + index)); -} - -int selectcard(void) -{ - int i; - - printk(BIOS_DEBUG, "%s", "\r\nCase 9....... \n\r"); - // send the length byte and command code through RFID interface - - transaction1(RFID_ADDR); - transaction2(RFID_ADDR); - transaction3(RFID_ADDR); - return (1); -} -#endif - -#include "northbridge/intel/sch/early_init.c" -#include "northbridge/intel/sch/raminit.h" -#include "northbridge/intel/sch/raminit.c" - -static void sch_enable_lpc(void) -{ - /* Initialize the FWH decode/Enable registers according to platform design */ - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD0, 0x00112233); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD4, 0xC0000000); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x60, 0x808A8B8B); - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x64, 0x8F898F89); -} - -static void sch_shadow_CMC(void) -{ - u32 reg32; - - /* FIXME: proper dest, proper src, and wbinvd, too */ - memcpy((void *)CMC_SHADOW, (void *)0xfffd0000, 64 * 1024); - // __asm__ volatile ("wbinvd\n" - //); - printk(BIOS_DEBUG, "copy done "); - memcpy((void *)0x3f5f0000, (void *)0x3faf0000, 64 * 1024); - printk(BIOS_DEBUG, "copy 2 done "); - reg32 = cpuid_eax(0x00000001); - printk(BIOS_INFO, "CPU ID: %d.\n", reg32); - - reg32 = cpuid_eax(0x80000008); - printk(BIOS_INFO, "Physical Address size: %d.\n", (reg32 & 0xFF)); - printk(BIOS_INFO, "Virtual Address size: %d.\n", - ((reg32 & 0xFF00) >> 8)); - sch_port_access_write_ram_cmd(0xB8, 4, 0, 0x3faf0000); - printk(BIOS_DEBUG, "1 "); - sch_port_access_write_ram_cmd(0xBA, 4, 0, reg32); - printk(BIOS_DEBUG, "2 "); -} - -static void poulsbo_setup_Stage1Regs(void) -{ - u32 reg32; - - printk(BIOS_DEBUG, "E000/F000 Routing "); - reg32 = sch_port_access_read(2, 3, 4); - sch_port_access_write(2, 3, 4, (reg32 | 0x6)); -} - -static void poulsbo_setup_Stage2Regs(void) -{ - u16 reg16; - - printk(BIOS_DEBUG, "Reserved"); - reg16 = pci_read_config16(PCI_DEV(0, 0x2, 0), 0x62); - pci_write_config16(PCI_DEV(0, 0x2, 0), 0x62, (reg16 | 0x3)); - /* Slot capabilities */ - pci_write_config32(PCI_DEV(0, 28, 0), 0x54, 0x80500); - pci_write_config32(PCI_DEV(0, 28, 1), 0x54, 0x100500); - /* FIXME: CPU ID identification */ - printk(BIOS_DEBUG, " done.\n"); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int boot_mode = 0; - - if (bist == 0) - enable_lapic(); - - sch_enable_lpc(); - console_init(); - - /* Halt if there was a built in self test failure */ - // report_bist_failure(bist); - // outl (0x00, 0x1088); - - /* - * Perform some early chipset initialization required - * before RAM initialization can work. - */ - sch_early_initialization(); - sdram_initialize(boot_mode); - - sch_shadow_CMC(); - poulsbo_setup_Stage1Regs(); - poulsbo_setup_Stage2Regs(); -#if 0 - sch_SMbase_init(); - - /* Perform some initialization that must run before stage2. */ -#endif - - /* - * This should probably go away. Until now it is required - * and mainboard specific. - */ - - /* Chipset Errata! */ - pci_write_config16(PCI_DEV(0, 0x2, 0), GGC, 0x20); - pci_write_config32(PCI_DEV(0, 0x2, 0), 0xc4, 0x00000002); - pci_write_config32(PCI_DEV(0, 0x2, 0), 0xe0, 0x00008000); - pci_write_config32(PCI_DEV(0, 0x2, 0), 0xf0, 0x00000005); - pci_write_config16(PCI_DEV(0, 0x2, 0), 0xf7, 0x80); - pci_write_config16(PCI_DEV(0, 0x2, 0), 0x4, 0x7); - -#if RFID_TEST - sch_SMbase_init(); - selectcard(); -#endif -} diff --git a/src/mainboard/iwave/iWRainbowG6/smihandler.c b/src/mainboard/iwave/iWRainbowG6/smihandler.c deleted file mode 100644 index f2fb1ec..0000000 --- a/src/mainboard/iwave/iWRainbowG6/smihandler.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/i82801gx/nvs.h" // FIXME: this should point to its own copy of nvs - -/* - * The southbridge SMI handler checks whether gnvs has a valid pointer before - * calling the trap handler. - */ -// extern global_nvs_t *gnvs; - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - // gnvs->smif = 0; - break; - default: - return 0; - } - - /* - * On success, the IO Trap Handler returns 0. - * On failure, the IO Trap Handler returns a value != 0. - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - // gnvs->smif = 0; - return 1; -} diff --git a/src/mainboard/iwave/iwrainbowg6/Kconfig b/src/mainboard/iwave/iwrainbowg6/Kconfig new file mode 100644 index 0000000..2846de8 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/Kconfig @@ -0,0 +1,36 @@ +if BOARD_IWAVE_RAINBOW_G6 + +# TODO: move options to chipset components as appropriate +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_441 + select NORTHBRIDGE_INTEL_SCH + select SOUTHBRIDGE_INTEL_SCH + select HAVE_PIRQ_TABLE +# select HAVE_MP_TABLE + select USE_PRINTK_IN_CAR + select UDELAY_LAPIC + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select BROKEN_CAR_MIGRATE + +config MAINBOARD_DIR + string + default iwave/iwrainbowg6 + +config MAINBOARD_PART_NUMBER + string + default "iWRainbowG6" + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 10 + +# This mainboard might have a higher clocked UART or might not be able to run +# serial output at 115200 baud + +endif diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/cpu.asl b/src/mainboard/iwave/iwrainbowg6/acpi/cpu.asl new file mode 100644 index 0000000..c3d6ff9 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/cpu.asl @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* Intel Core (2) Duo CPU node support + * + * Note: The ACPI P_BLK on the ICH7 (and probably others) lives at + * PMBASE + 0x10, and it's 0x06 bytes long. On ICH8 it's 8 bytes. + * + * The second CPU core does not need its own P_BLK. + */ + +Scope(_PR) +{ + Processor( + CPU1, // name of cpu/core 0 + 1, // numeric id of cpu/core + 0x510, // ACPI P_BLK base address + 6 // ACPI P_BLK size + ) + { + // TODO: _PDT + } + + Processor( + CPU2, // name of cpu/core 1 + 2, // numeric id of cpu/core 1 + 0, // ACPI P_BLK base address + 0) // ACPI P_BLK size + { + // TODO: _PDT + } +} // End _PR diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/ec.asl b/src/mainboard/iwave/iwrainbowg6/acpi/ec.asl new file mode 100644 index 0000000..680f6cb --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/ec.asl @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device(EC0) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 1) + + Method (_CRS, 0) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + + Return (ECMD) + } + + Method (_REG, 2) + { + // This method is needed by Windows XP/2000 + // for EC initialization before a driver + // is loaded + } + + Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI + + // TODO EC Query methods + + // TODO Scope _SB devices for AC power, LID, Power button + +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/northbridge_pci_irqs.asl b/src/mainboard/iwave/iwrainbowg6/acpi/northbridge_pci_irqs.asl new file mode 100644 index 0000000..cd1fed5 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/northbridge_pci_irqs.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, 0, 16 }, + Package() { 0x0001ffff, 1, 0, 17 }, + Package() { 0x0001ffff, 2, 0, 18 }, + Package() { 0x0001ffff, 3, 0, 19 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, 0, 23 }, + Package() { 0x001dffff, 1, 0, 19 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 16 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, 0, 17 }, + Package() { 0x001effff, 1, 0, 20 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 19}, + }) + } Else { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + }) + } +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/platform.asl b/src/mainboard/iwave/iwrainbowg6/acpi/platform.asl new file mode 100644 index 0000000..cd1593d --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/platform.asl @@ -0,0 +1,92 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + //Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // Call a trap so SMI can prepare for Sleep as well. + // TRAP(0x55) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/sleepstates.asl b/src/mainboard/iwave/iwrainbowg6/acpi/sleepstates.asl new file mode 100644 index 0000000..cdcdb75 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/sleepstates.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Name(_S0, Package(4){0x0,0x0,0,0}) +Name(_S1, Package(4){0x1,0x0,0,0}) +Name(_S3, Package(4){0x5,0x0,0,0}) +Name(_S4, Package(4){0x6,0x0,0,0}) +Name(_S5, Package(4){0x7,0x0,0,0}) diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/southbridge_pci_irqs.asl b/src/mainboard/iwave/iwrainbowg6/acpi/southbridge_pci_irqs.asl new file mode 100644 index 0000000..d702c99 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/southbridge_pci_irqs.asl @@ -0,0 +1,102 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 16}, + + Package() { 0x0001ffff, 0, 0, 20}, + Package() { 0x0001ffff, 1, 0, 21}, + Package() { 0x0001ffff, 2, 0, 22}, + Package() { 0x0001ffff, 3, 0, 23}, + + Package() { 0x0002ffff, 0, 0, 21}, + Package() { 0x0002ffff, 1, 0, 22}, + Package() { 0x0002ffff, 2, 0, 23}, + Package() { 0x0002ffff, 3, 0, 20}, + + Package() { 0x0003ffff, 0, 0, 22}, + Package() { 0x0003ffff, 1, 0, 23}, + Package() { 0x0003ffff, 2, 0, 20}, + Package() { 0x0003ffff, 3, 0, 21}, + + Package() { 0x0004ffff, 0, 0, 23}, + Package() { 0x0004ffff, 1, 0, 20}, + Package() { 0x0004ffff, 2, 0, 21}, + Package() { 0x0004ffff, 3, 0, 22}, + + Package() { 0x0005ffff, 0, 0, 19}, + Package() { 0x0005ffff, 1, 0, 18}, + Package() { 0x0005ffff, 2, 0, 17}, + Package() { 0x0005ffff, 3, 0, 16}, + + Package() { 0x0006ffff, 0, 0, 18}, + Package() { 0x0006ffff, 1, 0, 17}, + Package() { 0x0006ffff, 2, 0, 16}, + Package() { 0x0006ffff, 3, 0, 19}, + + Package() { 0x0009ffff, 0, 0, 21}, + Package() { 0x0009ffff, 1, 0, 22}, + Package() { 0x0009ffff, 2, 0, 23}, + Package() { 0x0009ffff, 3, 0, 20}, + }) +} Else { + Return (Package() { + Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKH, 0}, + + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, + + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKF, 0}, + + Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKG, 0}, + + Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0006ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0006ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0006ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0006ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, + + Package() { 0x0009ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0009ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0009ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0009ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, + }) +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/superio.asl b/src/mainboard/iwave/iwrainbowg6/acpi/superio.asl new file mode 100644 index 0000000..b11f740 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/superio.asl @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + + +Device (SIO1) +{ + Name (_HID, EISAID("PNP0A05")) + Name (_UID, 1) + + Device (UAR1) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 1) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } + + Device (UAR2) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 2) + + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/thermal.asl b/src/mainboard/iwave/iwrainbowg6/acpi/thermal.asl new file mode 100644 index 0000000..5330309 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/thermal.asl @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + + // FIXME these could/should be read from the + // GNVS area, so they can be controlled by + // coreboot + Name(TC1V, 0x04) + Name(TC2V, 0x03) + Name(TSPV, 0x64) + + // At which temperature should the OS start + // active cooling? + Method (_AC0, 0, Serialized) + { + Return (0xf5c) // Value for Rocky + } + + // Method (_AC1, 0, Serialized) + // { + // Return (0xf5c) + // } + + // Critical shutdown temperature + Method (_CRT, 0, Serialized) + { + Return (Add (0x0aac, 0x50)) // FIXME + } + + // CPU throttling start temperature + Method (_PSV, 0, Serialized) + { + Return (0xaaf) // FIXME + } + + // Get DTS Temperature + Method (_TMP, 0, Serialized) + { + Return (0xaac) // FIXME + } + + // Processors used for active cooling + Method (_PSL, 0, Serialized) + { + If (MPEN) { + Return (Package() {_PR.CPU1, _PR.CPU2}) + } + Return (Package() {_PR.CPU1}) + } + + // TC1 value for passive cooling + Method (_TC1, 0, Serialized) + { + Return (TC1V) + } + + // TC2 value for passive cooling + Method (_TC2, 0, Serialized) + { + Return (TC2V) + } + + // Sampling period for passive cooling + Method (_TSP, 0, Serialized) + { + Return (TSPV) + } + + + } +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi/video.asl b/src/mainboard/iwave/iwrainbowg6/acpi/video.asl new file mode 100644 index 0000000..3536913 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi/video.asl @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// Brightness write +Method (BRTW, 1, Serialized) +{ + // TODO +} + +// Hot Key Display Switch +Method (HKDS, 1, Serialized) +{ + // TODO +} + +// Lid Switch Display Switch +Method (LSDS, 1, Serialized) +{ + // TODO +} + +// Brightness Notification +Method(BRTN,1,Serialized) +{ + // TODO (no displays defined yet) +} diff --git a/src/mainboard/iwave/iwrainbowg6/acpi_tables.c b/src/mainboard/iwave/iwrainbowg6/acpi_tables.c new file mode 100644 index 0000000..4dcda79 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/acpi_tables.c @@ -0,0 +1,83 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +#include "southbridge/intel/sch/nvs.h" + +void acpi_create_gnvs(global_nvs_t * gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing. */ + + /* Enable both COM ports. */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays. */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, + MP_IRQ_TRIGGER_LEVEL | + MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented. */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/iwave/iwrainbowg6/board_info.txt b/src/mainboard/iwave/iwrainbowg6/board_info.txt new file mode 100644 index 0000000..ad25a93 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/board_info.txt @@ -0,0 +1,3 @@ +Board name: iW-RainboW-G6 +Category: half +Board URL: http://www.iwavesystems.com/iW-RainbowG6.htm diff --git a/src/mainboard/iwave/iwrainbowg6/cmos.layout b/src/mainboard/iwave/iwrainbowg6/cmos.layout new file mode 100644 index 0000000..0e15662 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/cmos.layout @@ -0,0 +1,147 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2009 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +#928 40 r 0 unused + +968 1 e 2 ethernet1 +969 1 e 2 ethernet2 +970 1 e 2 ethernet3 + +#971 13 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ram initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/iwave/iwrainbowg6/devicetree.cb b/src/mainboard/iwave/iwrainbowg6/devicetree.cb new file mode 100644 index 0000000..84cfc4b --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/devicetree.cb @@ -0,0 +1,39 @@ +chip northbridge/intel/sch + + device cpu_cluster 0 on + chip cpu/intel/socket_441 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 02.0 on end # Integrated Graphics and Video Device + + chip southbridge/intel/sch + register "pirqa_routing" = "0xa" + register "pirqb_routing" = "0xb" + register "pirqc_routing" = "0x5" + register "pirqd_routing" = "0xf" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + device pci 1a.0 on end # 26 0 USB Client + device pci 1b.0 on end # 27 0 HD Audio Controller + device pci 1c.0 on end # 28 0 PCI Express Port 1 + device pci 1c.1 on end # 28 1 PCI Express Port 2 + device pci 1d.0 on end # USB Classic UHCI Controller 1 + device pci 1d.1 on end # USB Classic UHCI Controller 2 + device pci 1d.2 on end # USB Classic UHCI Controller 3 + device pci 1d.7 on end # USB2 EHCI Controller + device pci 1e.0 on end # SDIO/MMC Port 0 + device pci 1e.1 on end # SDIO/MMC Port 1 + device pci 1e.2 on end # SDIO/MMC Port 2 + device pci 1f.0 on end # LPC bridge + device pci 1f.1 on end # PATA Controller + end + end +end + diff --git a/src/mainboard/iwave/iwrainbowg6/dsdt.asl b/src/mainboard/iwave/iwrainbowg6/dsdt.asl new file mode 100644 index 0000000..6b95127 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/dsdt.asl @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv2", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/sch/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + //#include "acpi/thermal.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sch/acpi/sch.asl> + #include <southbridge/intel/sch/acpi/sch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/sch/acpi/sleepstates.asl> +} diff --git a/src/mainboard/iwave/iwrainbowg6/fadt.c b/src/mainboard/iwave/iwrainbowg6/fadt.c new file mode 100644 index 0000000..8111672 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/fadt.c @@ -0,0 +1,155 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + 0x40) & 0xfffe; + + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long)facs; + fadt->dsdt = (unsigned long)dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = APM_CNT_PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x20; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x28; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0) + fadt->pm2_cnt_len = 2; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = APM_CNT_CST_CONTROL; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 85; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 0; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = 0x03; + + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x28; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, header->length); +} diff --git a/src/mainboard/iwave/iwrainbowg6/hda_verb.c b/src/mainboard/iwave/iwrainbowg6/hda_verb.c new file mode 100644 index 0000000..4cb2c9f --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/hda_verb.c @@ -0,0 +1,92 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009-2010 iWave Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static u32 mainboard_cim_verb_data[] = { + /* coreboot specific header */ + 0x111d76d5, // Codec Vendor / Device ID: IDT 92HD81 + 0x00000000, // Subsystem ID + 0x0000000a, // Number of jacks + + /* NID 0x0a, Port A (capless headphone) */ + 0x0A71C40, + 0x0A71D10, + 0x0A71EA1, + 0x0A71F02, + + /* NID 0x0b, Port B (capless headphone) */ + 0x0B71C1F, + 0x0B71D10, + 0x0B71E21, + 0x0B71F02, + + /* + * NID 0x0c, Port C (Line IN/OUT+MIC for YD/UA revisions, and + * Line IN+MIC for TA revision) + */ + 0x0C71CF0, + 0x0C71D00, + 0x0C71E00, + 0x0C71F40, + + /* NID 0x0d, Port D (BTL output - EAPD control) */ + 0x0D71C10, + 0x0D71D41, + 0x0D71E10, + 0x0D71F10, + + /* NID 0x0e, Port E (Line IN/OUT) */ + 0x0E71CF0, + 0x0E71D00, + 0x0E71E00, + 0x0E71F40, + + /* NID 0x0f, Port F (Line IN/OUT, MIC) */ + 0x0F71CF0, + 0x0F71D00, + 0x0F71E00, + 0x0F71F40, + + /* NID 0x10, MonoOut (output-only) */ + 0x1071CF0, + 0x1071D00, + 0x1071EF0, + 0x1071F40, + + /* NID 0x10, DigMic0 (Digital Microphone 0) */ + 0x1171CF0, + 0x1171D00, + 0x1171E00, + 0x1171F40, + + /* NID 0x1f, Dig0Pin (First Digital Output Pin) */ + 0x1F71C50, + 0x1F71D21, + 0x1F71E40, + 0x1F71F10, + + /* NID 0x20, Dig1Pin (Second Digital Output Pin / DMIC Input Pin) */ + 0x2071CF0, + 0x2071D00, + 0x2071E00, + 0x2071F40, + + /* BTL Gain */ + 0x017F417, /* Gain = 16.79dB */ +}; +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/iwave/iwrainbowg6/irq_tables.c b/src/mainboard/iwave/iwrainbowg6/irq_tables.c new file mode 100644 index 0000000..940ff52 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/irq_tables.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x8119, /* Device*/ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xdf, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x1e << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x1f << 3) | 0x0, {{0x62, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x1a << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x1d << 3) | 0x0, {{0x64, 0x8200}, {0x65, 0x8200}, {0x66, 0x8200}, {0x67, 0x8200}}, 0x0, 0x0}, + {0x00, (0x1b << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x00, (0x1c << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x01, (0x00 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + {0x02, (0x00 << 3) | 0x0, {{0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x63, 0x5cb8}, {0x60, 0x5cb8}}, 0x2, 0x0}, + {0x00, (0x00 << 3) | 0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/iwave/iwrainbowg6/mainboard.c b/src/mainboard/iwave/iwrainbowg6/mainboard.c new file mode 100644 index 0000000..dfc6636 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/mainboard.c @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009-2010 iWave Systems + * Copyright (C) 2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <console/console.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/iwave/iwrainbowg6/mptable.c b/src/mainboard/iwave/iwrainbowg6/mptable.c new file mode 100644 index 0000000..87de022 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/mptable.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + mptable_write_buses(mc, NULL, &isa_bus); + + smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); + { + device_t dev; + struct resource *res; + dev = dev_find_slot(1, PCI_DEVFN(0x1e,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 3, 0x20, res->base); + } + } + dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 4, 0x20, res->base); + } + } + dev = dev_find_slot(4, PCI_DEVFN(0x1e,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 5, 0x20, res->base); + } + } + dev = dev_find_slot(4, PCI_DEVFN(0x1c,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 8, 0x20, res->base); + } + } + } +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x1, 0x1, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x3, 0x1, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x4, 0x1, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x6, 0x1, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x7, 0x1, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x1, 0x8, 0x1, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x9, 0x1, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xc, 0x1, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xd, 0x1, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xe, 0x1, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x78, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x79, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7a, 0x1, 0x12); +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, isa_bus); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/iwave/iwrainbowg6/romstage.c b/src/mainboard/iwave/iwrainbowg6/romstage.c new file mode 100644 index 0000000..00d4a38 --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/romstage.c @@ -0,0 +1,383 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009-2010 iWave Systems + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/cache.h> +#include <arch/cpu.h> +#include <console/console.h> +#if 0 +#include "ram/ramtest.c" +#include "southbridge/intel/sch/early_smbus.c" +#endif + +#define RFID_TEST 0 + +#if RFID_TEST +#define RFID_ADDR 0xA0 +#define RFID_SELECT_CARD_COMMAND 0x01 +#define SELECT_COMMAND_LENGTH 0x01 + +#define SMBUS_BASE_ADDRESS 0x400 + +static u32 sch_SMbase_read(void) +{ + u32 SMBusBase; + + /* SMBus address */ + SMBusBase = pci_read_config32(PCI_DEV(0, 0x1f, 0), 0x40); + SMBusBase &= 0xFFFF; + printk(BIOS_DEBUG, "SMBus base = %x\r\n", SMBusBase); + return SMBusBase; +} + +static void sch_SMbase_init(void) +{ + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + outb(0x3F, SMBusBase + SMBCLKDIV); +} + +static void sch_SMbus_regs(void) +{ + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + printk(BIOS_DEBUG, "SMBHSTCNT. =%x\r\n", inb(SMBusBase + SMBHSTCNT)); + printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", inb(SMBusBase + SMBHSTSTS)); + printk(BIOS_DEBUG, "SMBCLKDIV. =%x\r\n", inb(SMBusBase + SMBCLKDIV)); + + printk(BIOS_DEBUG, "SMBHSTADD. =%x\r\n", inb(SMBusBase + SMBHSTADD)); + printk(BIOS_DEBUG, "SMBHSTCMD. =%x\r\n", inb(SMBusBase + SMBHSTCMD)); +} + +void smb_clear(void) +{ + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + outb(0x00, SMBusBase + SMBHSTCNT); + outb(0x07, SMBusBase + SMBHSTSTS); +} + +void data_clear(void) +{ + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + outb(0x00, SMBusBase + SMBHSTDAT0); + outb(0x00, SMBusBase + SMBHSTCMD); + outb(0x00, SMBusBase + SMBHSTDAT1); + outb(0x00, SMBusBase + SMBHSTDATB); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x1)); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x2)); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x3)); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x4)); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x5)); + outb(0x00, SMBusBase + (SMBHSTDATB + 0x6)); +} + +void transaction1(unsigned char dev_addr) +{ + int temp, a; + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + printk(BIOS_DEBUG, "Transaction 1"); + //clear the control and status registers + smb_clear(); + //clear the data register + data_clear(); + //program TSA register + outb(dev_addr, SMBusBase + SMBHSTADD); + //program command register + outb(0x04, SMBusBase + SMBHSTCMD); + //write data register + outb(0x04, SMBusBase + SMBHSTDAT0); + outb(0x04, SMBusBase + SMBHSTDATB); + + outb(0x09, SMBusBase + (SMBHSTDATB + 0x1)); + outb(0x11, SMBusBase + (SMBHSTDATB + 0x2)); + outb(0x22, SMBusBase + (SMBHSTDATB + 0x3)); + + //set the control register + outb(0x15, SMBusBase + SMBHSTCNT); + //check the status register for busy state + //sch_SMbus_regs (); + temp = inb(SMBusBase + SMBHSTSTS); + //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); + //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); + do { + temp = inb(SMBusBase + SMBHSTSTS); + printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp); + //sch_SMbus_regs (); + printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", + inb(SMBusBase + SMBHSTSTS)); + if (temp > 0) + break; + } while (1); + + switch (temp) { + case 1: + printk(BIOS_DEBUG, "SMBus Success"); + break; + default: + printk(BIOS_DEBUG, "SMBus error %d", temp); + break; + + } + sch_SMbus_regs(); + printk(BIOS_DEBUG, "Command in TRansaction 1=%x\r\n\n", + inb(SMBusBase + SMBHSTCMD)); +} + +void transaction2(unsigned char dev_addr) +{ + int temp, a; + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + printk(BIOS_DEBUG, "Transaction 2"); + //clear the control and status registers + smb_clear(); + //clear the data register + data_clear(); + //program TSA register + outb(dev_addr, SMBusBase + SMBHSTADD); + //program command register + outb(0x03, SMBusBase + SMBHSTCMD); + //write data register + outb(0x02, SMBusBase + SMBHSTDAT0); + outb(0x03, SMBusBase + SMBHSTDATB); + outb(0x09, SMBusBase + (SMBHSTDATB + 0x1)); + outb(0x15, SMBusBase + SMBHSTCNT); + //check the status register for busy state + //sch_SMbus_regs (); + temp = inb(SMBusBase + SMBHSTSTS); + //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); + //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); + do { + temp = inb(SMBusBase + SMBHSTSTS); + printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp); + //sch_SMbus_regs (); + printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", + inb(SMBusBase + SMBHSTSTS)); + if (temp > 0) + break; + } while (1); + + switch (temp) { + case 1: + printk(BIOS_DEBUG, "SMBus Success"); + break; + default: + printk(BIOS_DEBUG, "SMBus error %d", temp); + break; + + } + sch_SMbus_regs(); + + printk(BIOS_DEBUG, "Command in TRansaction 2=%x\r\n\n", + inb(SMBusBase + SMBHSTCMD)); +} + +void transaction3(unsigned char dev_addr) +{ + int temp, index, length; + u32 SMBusBase; + + SMBusBase = sch_SMbase_read(); + printk(BIOS_DEBUG, "smb_read_multiple_bytes"); + smb_clear(); + data_clear(); + outb(dev_addr, SMBusBase + SMBHSTADD); + outb(0x03, SMBusBase + SMBHSTCMD); + outb(0x11, SMBusBase + SMBHSTCNT); + + //data_clear(); + outb(dev_addr + 1, SMBusBase + SMBHSTADD); + + outb(0x15, SMBusBase + SMBHSTCNT); + + // sch_SMbus_regs (); + //check the status register for busy state + //temp=inb(SMBusBase+SMBHSTSTS); + //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp); + //sch_SMbus_regs (); + //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS)); + do { + temp = inb(SMBusBase + SMBHSTSTS); + printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", + inb(SMBusBase + SMBHSTSTS)); + //sch_SMbus_regs (); + if (temp > 0) + break; + } while (1); + + switch (temp) { + case 1: + printk(BIOS_DEBUG, "SMBus Success\n"); + break; + default: + printk(BIOS_DEBUG, "SMBus error %d", temp); + break; + + } + + sch_SMbus_regs(); + printk(BIOS_DEBUG, "ADDRESS is.. %x\r\n", inb(SMBusBase + SMBHSTADD)); + length = inb(SMBusBase + SMBHSTDAT0); + + printk(BIOS_DEBUG, "Length is.. %x\r\n", inb(SMBusBase + SMBHSTDAT0)); + + printk(BIOS_DEBUG, "Command is... %x\r\n", inb(SMBusBase + SMBHSTDATB)); + printk(BIOS_DEBUG, "Status .. %x\r\n", inb(SMBusBase + SMBHSTDATB + 1)); + for (index = 0; index < length; index++) + printk(BIOS_DEBUG, "Serial Byte[%x]..%x\r\n", index, + inb(SMBusBase + SMBHSTDATB + index)); +} + +int selectcard(void) +{ + int i; + + printk(BIOS_DEBUG, "%s", "\r\nCase 9....... \n\r"); + // send the length byte and command code through RFID interface + + transaction1(RFID_ADDR); + transaction2(RFID_ADDR); + transaction3(RFID_ADDR); + return (1); +} +#endif + +#include "northbridge/intel/sch/early_init.c" +#include "northbridge/intel/sch/raminit.h" +#include "northbridge/intel/sch/raminit.c" + +static void sch_enable_lpc(void) +{ + /* Initialize the FWH decode/Enable registers according to platform design */ + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD0, 0x00112233); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD4, 0xC0000000); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x60, 0x808A8B8B); + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x64, 0x8F898F89); +} + +static void sch_shadow_CMC(void) +{ + u32 reg32; + + /* FIXME: proper dest, proper src, and wbinvd, too */ + memcpy((void *)CMC_SHADOW, (void *)0xfffd0000, 64 * 1024); + // __asm__ volatile ("wbinvd\n" + //); + printk(BIOS_DEBUG, "copy done "); + memcpy((void *)0x3f5f0000, (void *)0x3faf0000, 64 * 1024); + printk(BIOS_DEBUG, "copy 2 done "); + reg32 = cpuid_eax(0x00000001); + printk(BIOS_INFO, "CPU ID: %d.\n", reg32); + + reg32 = cpuid_eax(0x80000008); + printk(BIOS_INFO, "Physical Address size: %d.\n", (reg32 & 0xFF)); + printk(BIOS_INFO, "Virtual Address size: %d.\n", + ((reg32 & 0xFF00) >> 8)); + sch_port_access_write_ram_cmd(0xB8, 4, 0, 0x3faf0000); + printk(BIOS_DEBUG, "1 "); + sch_port_access_write_ram_cmd(0xBA, 4, 0, reg32); + printk(BIOS_DEBUG, "2 "); +} + +static void poulsbo_setup_Stage1Regs(void) +{ + u32 reg32; + + printk(BIOS_DEBUG, "E000/F000 Routing "); + reg32 = sch_port_access_read(2, 3, 4); + sch_port_access_write(2, 3, 4, (reg32 | 0x6)); +} + +static void poulsbo_setup_Stage2Regs(void) +{ + u16 reg16; + + printk(BIOS_DEBUG, "Reserved"); + reg16 = pci_read_config16(PCI_DEV(0, 0x2, 0), 0x62); + pci_write_config16(PCI_DEV(0, 0x2, 0), 0x62, (reg16 | 0x3)); + /* Slot capabilities */ + pci_write_config32(PCI_DEV(0, 28, 0), 0x54, 0x80500); + pci_write_config32(PCI_DEV(0, 28, 1), 0x54, 0x100500); + /* FIXME: CPU ID identification */ + printk(BIOS_DEBUG, " done.\n"); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int boot_mode = 0; + + if (bist == 0) + enable_lapic(); + + sch_enable_lpc(); + console_init(); + + /* Halt if there was a built in self test failure */ + // report_bist_failure(bist); + // outl (0x00, 0x1088); + + /* + * Perform some early chipset initialization required + * before RAM initialization can work. + */ + sch_early_initialization(); + sdram_initialize(boot_mode); + + sch_shadow_CMC(); + poulsbo_setup_Stage1Regs(); + poulsbo_setup_Stage2Regs(); +#if 0 + sch_SMbase_init(); + + /* Perform some initialization that must run before stage2. */ +#endif + + /* + * This should probably go away. Until now it is required + * and mainboard specific. + */ + + /* Chipset Errata! */ + pci_write_config16(PCI_DEV(0, 0x2, 0), GGC, 0x20); + pci_write_config32(PCI_DEV(0, 0x2, 0), 0xc4, 0x00000002); + pci_write_config32(PCI_DEV(0, 0x2, 0), 0xe0, 0x00008000); + pci_write_config32(PCI_DEV(0, 0x2, 0), 0xf0, 0x00000005); + pci_write_config16(PCI_DEV(0, 0x2, 0), 0xf7, 0x80); + pci_write_config16(PCI_DEV(0, 0x2, 0), 0x4, 0x7); + +#if RFID_TEST + sch_SMbase_init(); + selectcard(); +#endif +} diff --git a/src/mainboard/iwave/iwrainbowg6/smihandler.c b/src/mainboard/iwave/iwrainbowg6/smihandler.c new file mode 100644 index 0000000..f2fb1ec --- /dev/null +++ b/src/mainboard/iwave/iwrainbowg6/smihandler.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" // FIXME: this should point to its own copy of nvs + +/* + * The southbridge SMI handler checks whether gnvs has a valid pointer before + * calling the trap handler. + */ +// extern global_nvs_t *gnvs; + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + // gnvs->smif = 0; + break; + default: + return 0; + } + + /* + * On success, the IO Trap Handler returns 0. + * On failure, the IO Trap Handler returns a value != 0. + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + // gnvs->smif = 0; + return 1; +} diff --git a/src/mainboard/jetway/Kconfig b/src/mainboard/jetway/Kconfig index 5b55daa..500bbb4 100644 --- a/src/mainboard/jetway/Kconfig +++ b/src/mainboard/jetway/Kconfig @@ -9,7 +9,7 @@ config BOARD_JETWAY_J7F4K1G2E bool "J7F4K1G2E" config BOARD_JETWAY_J7F4K1G5D bool "J7F4K1G5D" -config BOARD_JETWAY_PA78VM5 +config BOARD_JETWAY_PA78VM5_FAM10 bool "PA78VM5 (Fam10)" config BOARD_JETWAY_NF81_T56N_LF bool "NF81_T56N_LF" @@ -19,8 +19,8 @@ endchoice source "src/mainboard/jetway/j7f2/Kconfig" source "src/mainboard/jetway/j7f4k1g2e/Kconfig" source "src/mainboard/jetway/j7f4k1g5d/Kconfig" -source "src/mainboard/jetway/pa78vm5/Kconfig" -source "src/mainboard/jetway/nf81-t56n-lf/Kconfig" +source "src/mainboard/jetway/pa78vm5_fam10/Kconfig" +source "src/mainboard/jetway/nf81_t56n_lf/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c b/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c deleted file mode 100644 index cb94337..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> - -#include <Lib/amdlib.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> -#include <vendorcode/amd/cimx/sb800/SB800.h> -#include <stdint.h> -#include <stdlib.h> - -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - /* Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. - * Make sure the right speed settings are selected. - */ - ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; - return AGESA_SUCCESS; -} - -/* PCIE slot reset control */ -static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; - uint32_t FcnData; - PCIe_SLOT_RESET_INFO *ResetInfo; - - uint32_t GpioMmioAddr; - uint32_t AcpiMmioAddr; - uint8_t Data8; - uint16_t Data16; - - FcnData = Data; - ResetInfo = ConfigPtr; - /* Get SB800 MMIO Base (AcpiMmioAddr) */ - WriteIo8(0xCD6, 0x27); - Data8 = ReadIo8(0xCD7); - Data16=Data8<<8; - WriteIo8(0xCD6, 0x26); - Data8 = ReadIo8(0xCD7); - Data16|=Data8; - AcpiMmioAddr = (uint32_t)Data16 << 16; - Status = AGESA_UNSUPPORTED; - GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; - switch (ResetInfo->ResetId) - { - case 46: /* GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot */ - switch (ResetInfo->ResetControl) { - case AssertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); - Data8 &= ~(uint8_t)BIT6 ; - Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8); - Status = AGESA_SUCCESS; - break; - case DeassertSlotReset: - Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); - Data8 |= BIT6 ; - Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8); - Status = AGESA_SUCCESS; - break; - } - break; - } - return Status; -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/Kconfig b/src/mainboard/jetway/nf81-t56n-lf/Kconfig deleted file mode 100644 index 8a1e78b..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/Kconfig +++ /dev/null @@ -1,98 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_JETWAY_NF81_T56N_LF - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_FINTEK_F71869AD - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_2048 - select GFXUMA - -config MAINBOARD_DIR - string - default jetway/nf81-t56n-lf - -config MAINBOARD_PART_NUMBER - string - default "NF81-T56N-LF" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 2 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -#config VGA_BIOS_FILE -# string "VGA BIOS path and filename" -# depends on VGA_BIOS -# default "rom/video/OntarioGenericVbios.bin" - -config VGA_BIOS_ID - string - default "1002,9806" # FUSION_G_T56N - -config SB800_AHCI_ROM - bool - default n - -config DRIVERS_PS2_KEYBOARD - bool - default y - -endif # BOARD_JETWAY_NF81_T56N_LF diff --git a/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc b/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc deleted file mode 100644 index 0630008..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/Makefile.inc +++ /dev/null @@ -1,35 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -ifeq ($(CONFIG_AHCI_BIOS),y) -stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) -cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom -pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) -pci$(stripped_ahcibios_id).rom-type := optionrom -endif - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h b/src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h deleted file mode 100644 index cf0a4be..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/OptionsIds.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcie.c b/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcie.c deleted file mode 100644 index ad4934e..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcie.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "PlatformGnbPcieComplex.h" - -#include <string.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> - -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - **/ -void OemCustomizeInitEarly (IN OUT AMD_EARLY_PARAMS *InitEarly) -{ - AGESA_STATUS Status; - void *BrazosPcieComplexListPtr; - void *BrazosPciePortPtr; - void *BrazosPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - -/** - * @brief Initialize Port descriptors - */ -PCIe_PORT_DESCRIPTOR PortList [] = { - /* (PCIe port, Lanes 4, PCI Device Number 4, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, - GNB_GPP_PORT4_CHANNEL_TYPE, - 4, - GNB_GPP_PORT4_HOTPLUG_SUPPORT, - GNB_GPP_PORT4_SPEED_MODE, - GNB_GPP_PORT4_SPEED_MODE, - GNB_GPP_PORT4_LINK_ASPM, - 46) - }, - /* (PCIe port, Lanes 5, PCI Device Number 5, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, - GNB_GPP_PORT5_CHANNEL_TYPE, - 5, - GNB_GPP_PORT5_HOTPLUG_SUPPORT, - GNB_GPP_PORT5_SPEED_MODE, - GNB_GPP_PORT5_SPEED_MODE, - GNB_GPP_PORT5_LINK_ASPM, - 46) - }, - /* (PCIe port, Lanes 6, PCI Device Number 6, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, - GNB_GPP_PORT6_CHANNEL_TYPE, - 6, - GNB_GPP_PORT6_HOTPLUG_SUPPORT, - GNB_GPP_PORT6_SPEED_MODE, - GNB_GPP_PORT6_SPEED_MODE, - GNB_GPP_PORT6_LINK_ASPM, - 46) - }, - /* (PCIe port, Lanes 7, PCI Device Number 7, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, - GNB_GPP_PORT7_CHANNEL_TYPE, - 7, - GNB_GPP_PORT7_HOTPLUG_SUPPORT, - GNB_GPP_PORT7_SPEED_MODE, - GNB_GPP_PORT7_SPEED_MODE, - GNB_GPP_PORT7_LINK_ASPM, - 0) - }, - /* (PCIe port, Lanes 8, PCI Device Number 8, ...) */ - { - /* Descriptor flags. IMPORTANT! Terminate last element of array */ - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, - GNB_GPP_PORT8_CHANNEL_TYPE, - 8, - GNB_GPP_PORT8_HOTPLUG_SUPPORT, - GNB_GPP_PORT8_SPEED_MODE, - GNB_GPP_PORT8_SPEED_MODE, - GNB_GPP_PORT8_LINK_ASPM, - 0) - } -}; - -/** - * @brief Initialize Ddi descriptors - */ -PCIe_DDI_DESCRIPTOR DdiList [] = { - /* (DDI interface Lanes 8:11, DdA, ...) */ - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - /* PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) */ - {ConnectorTypeLvds, Aux1, Hdp1} - }, - /* (DDI interface Lanes 12:15, DdB, ...) */ - { - /* Descriptor flags. IMPORTANT! Terminate last element of array */ - DESCRIPTOR_TERMINATE_LIST, - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - /* PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) */ - {ConnectorTypeDP, Aux2, Hdp2} - } -}; - -PCIe_COMPLEX_DESCRIPTOR Brazos = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - - /** - * @brief GNB PCIe topology Porting - * - * Allocate buffer for - * PCIe_COMPLEX_DESCRIPTOR, PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - */ - AllocHeapParams.RequestedBufferSize = - sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - - /** - * Could not allocate buffer for - * PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - */ - if (Status!= AGESA_SUCCESS) { - ASSERT(FALSE); - return; - } - - BrazosPcieComplexListPtr = - (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Brazos); - BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); - memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); - memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); - - ((PCIe_COMPLEX_DESCRIPTOR *) BrazosPcieComplexListPtr)->PciePortList = - (PCIe_PORT_DESCRIPTOR *) BrazosPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR *) BrazosPcieComplexListPtr)->DdiLinkList = - (PCIe_DDI_DESCRIPTOR *) BrazosPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcieComplex.h b/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcieComplex.h deleted file mode 100644 index dd6f7d7..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include <vendorcode/amd/agesa/f14/AGESA.h> -#include <vendorcode/amd/agesa/f14/Lib/amdlib.h> - -/** - * @brief Graphic NorthBridge (GNB) General Purpose Port (GPP) - * - * GNB_GPP_PORT?_PORT_PRESENT - * 0:Disable 1:Enable - * - * GNB_GPP_PORT?_SPEED_MODE - * 0:Auto 1:GEN1 2:GEN2 - * - * GNB_GPP_PORT?_LINK_ASPM - * 0:Disable 1:L0s 2:L1 3:L0s+L1 - * - * GNB_GPP_PORT?_CHANNEL_TYPE - - * 0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - * 3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) - * - * GNB_GPP_PORT?_HOTPLUG_SUPPORT - * 0:Disable 1:Basic 3:Enhanced - */ - -/* GNB GPP 4 */ -#define GNB_GPP_PORT4_PORT_PRESENT 1 -#define GNB_GPP_PORT4_SPEED_MODE 2 -#define GNB_GPP_PORT4_LINK_ASPM 3 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 -#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 - -/* GNB GPP 5 */ -#define GNB_GPP_PORT5_PORT_PRESENT 1 -#define GNB_GPP_PORT5_SPEED_MODE 2 -#define GNB_GPP_PORT5_LINK_ASPM 3 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 -#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 - -/* GNB GPP 6 */ -#define GNB_GPP_PORT6_PORT_PRESENT 1 -#define GNB_GPP_PORT6_SPEED_MODE 2 -#define GNB_GPP_PORT6_LINK_ASPM 3 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 -#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 - -/* GNB GPP 7 */ -#define GNB_GPP_PORT7_PORT_PRESENT 0 -#define GNB_GPP_PORT7_SPEED_MODE 2 -#define GNB_GPP_PORT7_LINK_ASPM 3 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 -#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 - -/* GNB GPP 8 */ -#define GNB_GPP_PORT8_PORT_PRESENT 1 -#define GNB_GPP_PORT8_SPEED_MODE 2 -#define GNB_GPP_PORT8_LINK_ASPM 3 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 -#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 - -void OemCustomizeInitEarly (IN OUT AMD_EARLY_PARAMS *InitEarly); - -#endif /* _PLATFORM_GNB_PCIE_COMPLEX_H */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl deleted file mode 100644 index bb47ded..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/gpe.asl +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Scope(_GPE) { /* Start Scope GPE */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } -} /* End Scope GPE */ - -/* Contains the GPEs for USB overcurrent */ -#include "usb_oc.asl" diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl deleted file mode 100644 index 1f532cf..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/mainboard.asl +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Data to be patched by the BIOS during POST */ -/* FIXME the patching is not done yet! */ -/* Memory related values */ -Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ -Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ -Name(PBLN, 0x0) /* Length of BIOS area */ - -Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ -Name(HPBA, 0xFED00000) /* Base address of HPET table */ - -Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - -/* Some global data */ -Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ -Name(OSV, Ones) /* Assume nothing */ -Name(PMOD, One) /* Assume APIC */ - -Scope(_SB) { - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } -} - -Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } -} /* End Scope SI */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl deleted file mode 100644 index 0395700..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/routing.asl +++ /dev/null @@ -1,340 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* OHCI, dev 18, 19, 22 func 0 - * EHCI, dev 18, 19, 22 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */ - Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */ - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* OHCI, dev 18, 19, 22 func 0 - * EHCI, dev 18, 19, 22 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */ - Package(){0x0003FFFF, 0, 0, 0x14 }, - Package(){0x0003FFFF, 1, 0, 0x15 }, - Package(){0x0003FFFF, 2, 0, 0x16 }, - Package(){0x0003FFFF, 3, 0, 0x17 }, - Package(){0x0004FFFF, 0, 0, 0x15 }, - Package(){0x0004FFFF, 1, 0, 0x16 }, - Package(){0x0004FFFF, 2, 0, 0x17 }, - Package(){0x0004FFFF, 3, 0, 0x14 }, - Package(){0x0005FFFF, 0, 0, 0x16 }, - Package(){0x0005FFFF, 1, 0, 0x17 }, - Package(){0x0005FFFF, 2, 0, 0x14 }, - Package(){0x0005FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl deleted file mode 100644 index 5d0f8f0..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/sleep.asl +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) -} /* End Method(_PTS) */ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) -} /* End Method(_WAK) */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl deleted file mode 100644 index 6dcb877..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/superio.asl +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Super I/O devices - * - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/thermal.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/thermal.asl deleted file mode 100644 index 2f50475..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/thermal.asl +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Thermal Zones have been #if 0 for a long time. - * Removing it for now because it doesn't seem to - * do anything when enabled anyway. - */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl b/src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl deleted file mode 100644 index 0429ac7..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi/usb_oc.asl +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ - -/* USB overcurrent mapping pins. */ -Name(UOM0, 0) -Name(UOM1, 2) -Name(UOM2, 0) -Name(UOM3, 7) -Name(UOM4, 2) -Name(UOM5, 2) -Name(UOM6, 6) -Name(UOM7, 2) -Name(UOM8, 6) -Name(UOM9, 6) - -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c b/src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c deleted file mode 100644 index 95f2a0e..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/acpi_tables.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" - -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <console/console.h> -#include <cpu/amd/amdfam14.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * FIXME: remove this work-around and url.. WinXP is EOL'ed any way. - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *alib; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS - it needs 64 bit alignment */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } - else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } - else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* The DSDT needs additional work for the AGESA SSDT Pstate table */ - /* Keep the comment for a while. */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - } else { - printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); - } - - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); - ssdt2 = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); - current += ssdt2->length; - acpi_add_table(rsdp,ssdt2); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.c b/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.c deleted file mode 100644 index 31c8e72..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "PlatformGnbPcieComplex.h" - -#define __SIMPLE_DEVICE__ - -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/mtrr.h> -#include <stdint.h> -#include <string.h> - -#include <cpu/amd/agesa/s3_resume.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#define MMCONF_ENABLE 1 - -/* ACPI table pointers returned by AmdInitLate */ -void *DmiTable = NULL; -void *AcpiPstate = NULL; -void *AcpiSrat = NULL; -void *AcpiSlit = NULL; - -void *AcpiWheaMce = NULL; -void *AcpiWheaCmc = NULL; -void *AcpiAlib = NULL; - -AGESA_STATUS agesawrapper_amdinitcpuio(void) -{ - pci_devfn_t dev; - msr_t msr; - uint32_t reg32; - - dev = PCI_DEV(0, 0x18, 1); - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - pci_io_write_config32(dev, 0xf4, 1); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - * Last address before processor local APIC at FEE00000 - */ - pci_io_write_config32(dev, 0x84, 0x00fedf00 | (1 << 7)); - - /* Lowest NP address is HPET at FED00000 */ - pci_io_write_config32(dev, 0x80, (0xfed00000 >> 8) | 3); - - /* Map the remaining PCI hole as posted MMIO */ - pci_io_write_config32(dev, 0x8C, 0x00fecf00); - - msr = rdmsr(0xc001001a); - reg32 = (msr.hi << 24) | (msr.lo >> 8) | 3; /* Equivalent to msr >> 8 */ - pci_io_write_config32(dev, 0x88, reg32); - - /* Send all IO (0000-FFFF) to southbridge. */ - pci_io_write_config32(dev, 0xc4, 0x0000f000); - pci_io_write_config32(dev, 0xc0, 0x00000003); - - return AGESA_SUCCESS; -} - -AGESA_STATUS agesawrapper_amdinitmmio(void) -{ - uint64_t MsrReg; - uint32_t PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - uint8_t BusRangeVal = 0; - uint8_t BusNum; - uint8_t Index; - - /* - * Set the MMIO Configuration Base Address and Bus Range onto MMIO - * configuration base Address MSR register. - */ - - for (Index = 0; Index < 8; Index++) { - BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; - if (BusNum == 1) { - BusRangeVal = Index; - break; - } - } - - MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (uint64_t)(BusRangeVal << 2) | MMCONF_ENABLE); - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000ull; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set Ontario Link Data */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); - PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); - PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - return AGESA_SUCCESS; -} - -AGESA_STATUS agesawrapper_amdinitreset(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = NULL; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - PCI_ADDR PciAddress; - uint32_t PciValue; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - /* Write to D1F0x18 */ - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x00010100; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Legacy Bridge Mode - * Modify B1D5F0x18 - */ - PciAddress.Address.Bus = 1; - PciAddress.Address.Device = 5; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Legacy Bridge Mode - * Modify B1D5F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Pcie Mode - * Modify B0D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Pcie Mode - * Modify B0D1F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Base and Limit Address - * Modify B0D1F0x20 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x20; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96009600; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Prefetchable Memory Limit and Base - * Modify B0D1F0x24 - */ - PciAddress.Address.Register = 0x24; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x8FF18001; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -void * agesawrapper_getlateinitptr(int pick) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS * AmdLateParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; - - printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); - - status = AmdInitLate (AmdLateParamsPtr); - if (status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParamsPtr->DmiTable; - AcpiPstate = AmdLateParamsPtr->AcpiPState; - AcpiSrat = AmdLateParamsPtr->AcpiSrat; - AcpiSlit = AmdLateParamsPtr->AcpiSlit; - AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; - AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; - AcpiAlib = AmdLateParamsPtr->AcpiAlib; - - printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" - " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" - " Mce:%p\n Cmc:%p\n Alib:%p\n", - __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, - AcpiWheaMce, AcpiWheaCmc, AcpiAlib); - - /* Don't release the structure until coreboot has copied the ACPI tables. - * AmdReleaseStruct (&AmdLateParams); - */ - - return status; -} - -AGESA_STATUS agesawrapper_amdinitresume(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amds3laterestore(void) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(status == AGESA_SUCCESS); - } - - return status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_amdS3Save(void) -{ - AGESA_STATUS status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - AmdCreateStruct(&AmdInterfaceParams); - - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - status = AmdS3Save (AmdS3SaveParamsPtr); - if (status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - - status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage - ); - } - - OemAgesaSaveMtrr(); - AmdReleaseStruct (&AmdInterfaceParams); - - return status; -} -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - uint32_t Func, - uint32_t Data, - void *ConfigPtr - ) -{ - AGESA_STATUS status; - AP_EXE_PARAMS ApExeParams; - - memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - status = AmdLateRunApTask (&ApExeParams); - if (status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(status == AGESA_SUCCESS); - } - - return status; -} - -AGESA_STATUS agesawrapper_amdreadeventlog(void) -{ - AGESA_STATUS status; - EVENT_PARAMS AmdEventParams; - - memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = NULL; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); - status = AmdReadEventLog (&AmdEventParams); - } - - return status; -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.h b/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.h deleted file mode 100644 index 720f3be..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/agesawrapper.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include <vendorcode/amd/agesa/f14/AGESA.h> - - -/** - * Define AMD Ontario APU SSID/SVID - */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /**< DMI Interface */ - PICK_PSTATE, /**< Acpi Pstate SSDT Table */ - PICK_SRAT, /**< SRAT Table */ - PICK_SLIT, /**< SLIT Table */ - PICK_WHEA_MCE, /**< WHEA MCE table */ - PICK_WHEA_CMC, /**< WHEA CMV table */ - PICK_ALIB, /**< SACPI SSDT table with ALIB implementation */ -}; - - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); - -AGESA_STATUS agesawrapper_amdreadeventlog(void); - -AGESA_STATUS agesawrapper_amdinitcpuio(void); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); -AGESA_STATUS agesawrapper_amdlaterunaptask(uint32_t, uint32_t, void *); -void * agesawrapper_getlateinitptr(int); - -#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt b/src/mainboard/jetway/nf81-t56n-lf/board_info.txt deleted file mode 100644 index 0253ea2..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board URL: http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=822&proname=NF81... -Category: mini -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c b/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c deleted file mode 100644 index 8d8bbec..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/buildOpts.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> - -#include <vendorcode/amd/agesa/f14/AGESA.h> - -/* Include the files that instantiate the configuration definitions. */ -#include <vendorcode/amd/agesa/f14/Include/AdvancedApi.h> -#include <vendorcode/amd/agesa/f14/Include/CommonReturns.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/cpuFamilyTranslation.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/Feature/cpuFeatures.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> -/* AGESA nonesense: the next two headers depend on heapManager.h */ -#include <vendorcode/amd/agesa/f14/Proc/Common/CreateStruct.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/cpuEarlyInit.h> -/* These tables are optional and may be used to adjust memory timing settings */ -#include <vendorcode/amd/agesa/f14/Proc/Mem/mm.h> -#include <vendorcode/amd/agesa/f14/Proc/Mem/mn.h> - -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/** - * AGESA optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE - #define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_SLIT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - -/* - * AGESA entry points used in this implementation. - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE TRUE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO FALSE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/** - * AGESA configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ - -/* The fixed MTRR values to be set after memory initialization. */ -const AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/** - * @brief Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - */ - -/* - * This is the delivery package title, "BrazosPI" - * This string MUST be exactly 8 characters long - */ -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - -/* This is the release version number of the AGESA component - * This string MUST be exactly 12 characters long - */ -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 /**< DDR 400 */ -#define DDR533_FREQUENCY 266 /**< DDR 533 */ -#define DDR667_FREQUENCY 333 /**< DDR 667 */ -#define DDR800_FREQUENCY 400 /**< DDR 800 */ -#define DDR1066_FREQUENCY 533 /**< DDR 1066 */ -#define DDR1333_FREQUENCY 667 /**< DDR 1333 */ -#define DDR1600_FREQUENCY 800 /**< DDR 1600 */ -#define DDR1866_FREQUENCY 933 /**< DDR 1866 */ -#define UNSUPPORTED_DDR_FREQUENCY 934 /**< Max limit of DDR frequency */ - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 /**< Quadrank registered DIMM */ -#define QUADRANK_UNBUFFERED 1 /**< Quadrank unbuffered DIMM */ - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 /**< Use best rate possible */ -#define TIMING_MODE_LIMITED 1 /**< Set user top limit */ -#define TIMING_MODE_SPECIFIC 2 /**< Set user specified speed */ - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 /**< Channel power down mode */ -#define POWER_DOWN_BY_CHIP_SELECT 1 /**< Chip select power down mode */ - -/** - * The following definitions specify the default values for various parameters - * in which there are no clearly defined defaults to be used in the common - * file. The values below are based on product and BKDG content. - */ -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -/* AGESA nonsense: this header depends on the definitions above */ -/* Instantiate all solution relevant data. */ -#include <vendorcode/amd/agesa/f14/Include/PlatformInstall.h> - -/** - * @brief Customer Overides Memory Table - * - * Platform Specific Overriding Table allows IBV/OEM to pass in platform - * information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). - * If PlatformSpecificTable is populated, AGESA will base its settings on the - * data from the table. Otherwise, it will use its default conservative settings. - */ -const PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - - -/* DA Customer table */ -const uint8_t AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = -{ - NBACCESS (MTEnd, 0, 0, 0, 0, 0), /* End of Table */ -}; -const uint8_t SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); diff --git a/src/mainboard/jetway/nf81-t56n-lf/cmos.layout b/src/mainboard/jetway/nf81-t56n-lf/cmos.layout deleted file mode 100644 index ab65be0..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb deleted file mode 100644 index 8f4d3b3..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ /dev/null @@ -1,151 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] -# device pci 1.1 on end # Internal Audio P2P bridge 0x1314 - device pci 4.0 on end # PCIE P2P bridge PCIe slot - device pci 5.0 off end # PCIE P2P bridge - device pci 6.0 on end # GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) - device pci 7.0 off end # PCIE P2P bridge - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71869ad - register "multi_function_register_1" = "0x01" - register "multi_function_register_2" = "0x6f" - register "multi_function_register_3" = "0x24" - register "multi_function_register_4" = "0x00" - register "multi_function_register_5" = "0x60" -# HWM configuration registers - register "hwm_smbus_address" = "0x98" - register "hwm_smbus_control_reg" = "0x02" - register "hwm_fan_type_sel_reg" = "0x00" - register "hwm_fan1_temp_adj_rate_reg" = "0x33" - register "hwm_fan_mode_sel_reg" = "0x07" - register "hwm_fan1_idx_rpm_mode" = "0x0e" - register "hwm_fan1_seg1_speed_count" = "0xff" - register "hwm_fan1_seg2_speed_count" = "0x0e" - register "hwm_fan1_seg3_speed_count" = "0x07" - register "hwm_fan1_temp_map_sel" = "0x8c" -# -# XXX: 4e is the default index port and .xy is the -# LDN indexing the pnp_info array found in the superio.c -# NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124, -# see page 18 from Fintek F71869 V1.1 datasheet. - device pnp 2e.00 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.01 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end -# COM2 not physically wired on board. - device pnp 2e.02 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.03 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.04 on # Hardware Monitor - io 0x60 = 0x225 # Fintek datasheet says 0x295. - irq 0x70 = 0 - end - device pnp 2e.05 on # KBC - io 0x60 = 0x060 - irq 0x70 = 1 # Keyboard IRQ - irq 0x72 = 12 # Mouse IRQ - end - device pnp 2e.06 off end # GPIO - device pnp 2e.07 on end # WDT - device pnp 2e.08 off end # CIR - device pnp 2e.0a on end # PME - end # f71869ad - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB (0x4399) - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) - device pci 15.1 on end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 (0x4397) - device pci 16.2 on end # EHCI USB 10-13 (0x4396) - register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - PortA-D on 15.0-3 are each x1 lanes. - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - device pci 18.6 on end - device pci 18.7 on end - -# -# TODO: Verify the proper SocketId/MemChannelId/DimmId addresses of the SPD -# with i2cdump tool. -# Notes: 0xa0=0x50*2, 0xa2=0x51*2.. 0x50-0x54 are usually RAM modules on the SMBus. -# - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/jetway/nf81-t56n-lf/dsdt.asl b/src/mainboard/jetway/nf81-t56n-lf/dsdt.asl deleted file mode 100644 index a650bca..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/dsdt.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "JETWAY", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - #include "acpi/mainboard.asl" - - #include <cpu/amd/agesa/family14/acpi/cpu.asl> - - #include "acpi/routing.asl" - - Scope(_SB) { - /* global utility methods expected within the _SB scope */ - #include <arch/x86/acpi/globutil.asl> - - Device(PCI0) { - - /* Describe the AMD Northbridge */ - #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> - - /* Describe the AMD Fusion Controller Hub Southbridge */ - #include <southbridge/amd/cimx/sb800/acpi/fch.asl> - - } - } /* End Scope(_SB) */ - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> - - /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ - #include "acpi/sleep.asl" - - #include "acpi/gpe.asl" - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - #include "acpi/thermal.asl" - #include "acpi/superio.asl" -} -/* End of ASL file */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c deleted file mode 100644 index 94a69f9..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <cpu/amd/amdfam14.h> -#include <device/pci_def.h> -#include <string.h> -#include <stdint.h> - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align table on 16 byte boundary. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* PCI Bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c b/src/mainboard/jetway/nf81-t56n-lf/mainboard.c deleted file mode 100644 index d67e072..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/mainboard.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <northbridge/amd/agesa/BiosCallOuts.h> - -#include <arch/acpi.h> -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_def.h> - -#include <southbridge/amd/amd_pci_util.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> -#include <southbridge/amd/cimx/sb800/pci_devs.h> -#include <southbridge/amd/cimx/cimx_util.h> -#include <northbridge/amd/agesa/family14/pci_devs.h> - -void set_pcie_reset(void); -void set_pcie_dereset(void); - -/*********************************************************** - * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. - * This table is responsible for physically routing the PIC and - * IOAPIC IRQs to the different PCI devices on the system. It - * is read and written via registers 0xC00/0xC01 as an - * Index/Data pair. These values are chipset and mainboard - * dependent and should be updated accordingly. - * - * These values are used by the PCI configuration space, - * MP Tables. TODO: Make ACPI use these values too. - * - * The Persimmon PCI INTA/B/C/D pins are connected to - * FCH pins INTE/F/G/H on the schematic so these need - * to be routed as well. - */ -static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { - /* INTA# - INTH# */ - [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, - /* Misc-nil,0,1,2, INT from Serial irq */ - [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */ - [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, - /* IMC INT0 - 5 */ - [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - /* USB Devs 18/19/20/22 INTA-C */ - [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, - /* IDE, SATA */ - [0x40] = 0x0B,0x0B, - /* GPPInt0 - 3 */ - [0x50] = 0x0A,0x0B,0x0A,0x0B -}; - -static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { - /* INTA# - INTH# */ - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, - /* Misc-nil,0,1,2, INT from Serial irq */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, - /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F, - /* IMC INT0 - 5 */ - [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, - /* USB Devs 18/19/22/20 INTA-C */ - [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, - /* IDE, SATA */ - [0x40] = 0x11,0x13, - /* GPPInt0 - 3 */ - [0x50] = 0x10,0x11,0x12,0x13 -}; - -/* - * This table defines the index into the picr/intr_data - * tables for each device. Any enabled device and slot - * that uses hardware interrupts should have an entry - * in this table to define its index into the FCH - * PCI_INTR register 0xC00/0xC01. This index will define - * the interrupt that it should use. Putting PIRQ_A into - * the PIN A index for a device will tell that device to - * use PIC IRQ 10 if it uses PIN A for its hardware INT. - */ -/* - * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H - * but because PCI INT_PIN swizzling isnt implemented to match - * the IDSEL (dev 3) of the slot, the table is adjusted for the - * swizzle and INTA is connected to PIRQH so PINA/B/C/D on - * off-chip devices should get mapped to PIRQH/E/F/G. - */ -static const struct pirq_struct mainboard_pirq_data[] = { - /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ - {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ - {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */ - {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */ - {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ - {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ - {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ - {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ - {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ - {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ - {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */ - {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ - {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */ - {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */ - {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ - {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ -}; - -/* PIRQ Setup */ -static void pirq_setup(void) -{ - pirq_data_ptr = mainboard_pirq_data; - pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); - intr_data_ptr = mainboard_intr_data; - picr_data_ptr = mainboard_picr_data; -} - -/** - * TODO - * SB CIMx callback - */ -void set_pcie_reset(void) -{ -} - -/** - * TODO - * mainboard specific SB CIMx callback - */ -void set_pcie_dereset(void) -{ -} - - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - - /* enable GPP CLK0 thru CLK3 (interleaved) */ - /* disable GPP CLK4 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - *(misc_mem_clk_cntrl + 0) = 0xFF; - *(misc_mem_clk_cntrl + 1) = 0xFF; - *(misc_mem_clk_cntrl + 2) = 0x00; - *(misc_mem_clk_cntrl + 3) = 0x00; - *(misc_mem_clk_cntrl + 4) = 0x00; - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_iowrite(0x29, 0x80); - pm_iowrite(0x28, 0x61); - - /* Initialize the PIRQ data structures for consumption */ - pirq_setup(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/jetway/nf81-t56n-lf/mptable.c b/src/mainboard/jetway/nf81-t56n-lf/mptable.c deleted file mode 100644 index 4390605..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/mptable.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/smp/mpspec.h> -#include <console/console.h> -#include <cpu/amd/amdfam14.h> -#include <device/pci.h> -#include <drivers/generic/ioapic/chip.h> -#include <stdint.h> -#include <string.h> - -#include <southbridge/amd/amd_pci_util.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> - - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - /* Intialize the MP_Table */ - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - /* - * Type 0: Processor Entries: - * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, - * CPU Signature (Stepping, Model, Family), - * Feature Flags - */ - smp_write_processors(mc); - - /* - * Type 1: Bus Entries: - * Bus ID, Bus Type - */ - mptable_write_buses(mc, NULL, &bus_isa); - - /* - * Type 2: I/O APICs: - * APIC ID, Version, APIC Flags:EN, Address - */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - /* - * Type 3: I/O Interrupt Table Entries: - * Int Type, Int Polarity, Int Level, Source Bus ID, - * Source Bus IRQ, Dest APIC ID, Dest PIN# - */ - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device */ - PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); - PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); - - /* SMBUS / ACPI */ - PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); - - /* Southbridge HD Audio */ - PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); - - /* LPC */ - PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); - - /* USB */ - PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); - PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); - PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); - PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); - PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]); - - /* IDE */ - PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]); - - /* SATA */ - PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); - - /* On-board NIC & Slot PCIE. */ - PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ - PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0 */ - PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ - PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ - PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ - PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ - } - - /* On-board Realtek NIC 2. (PCIe PortA) */ - PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */ - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h b/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h deleted file mode 100644 index bbd1d14..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/platform_cfg.h +++ /dev/null @@ -1,260 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x07 - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -//#define AZALIA_SDIN_PIN 0xAA -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 0 - -/* FIXME: Verify this for sound to work! */ -static const CODECENTRY persimmon_codec_alc269[] = -{ - /* NID, PinConfig */ - {0x12, 0x411111F0}, - {0x14, 0x99130110}, - {0x21, 0x0121401F}, - {0x17, 0x411111F0}, - {0x18, 0x01A19820}, - {0x19, 0x411111F0}, - {0x1A, 0x0181302F}, - {0x1B, 0x411111F0}, - {0x1D, 0x40069E05}, - {0x1E, 0x411111F0}, - {0x20, 0x0001FFFF}, - {0xff, 0xffffffff} /* end of table */ -}; - -/* FIXME: Verify this for sound to work! */ -static const CODECTBLLIST codec_tablelist[] = -{ - {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]}, - {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -/* set up an ACPI preferred power management profile */ -/* from acpi.h - * PM_UNSPECIFIED = 0, - * PM_DESKTOP = 1, - * PM_MOBILE = 2, - * PM_WORKSTATION = 3, - * PM_ENTERPRISE_SERVER = 4, - * PM_SOHO_SERVER = 5, - * PM_APPLIANCE_PC = 6, - * PM_PERFORMANCE_SERVER = 7, - * PM_TABLET = 8 - */ -#define FADT_PM_PROFILE 1 - -#endif /* _PLATFORM_CFG_H_ */ diff --git a/src/mainboard/jetway/nf81-t56n-lf/romstage.c b/src/mainboard/jetway/nf81-t56n-lf/romstage.c deleted file mode 100644 index 7f91714..0000000 --- a/src/mainboard/jetway/nf81-t56n-lf/romstage.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> - -#include <arch/acpi.h> -#include <arch/cpu.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <cbmem.h> -#include <console/console.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/bist.h> - -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <stdint.h> -#include <string.h> - -#include <console/loglevel.h> -#include <cpu/x86/mtrr.h> -#include <cpu/x86/cache.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/car.h> -#include <sb_cimx.h> -#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f71869ad/f71869ad.h> - -/* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */ -#define SERIAL_DEV PNP_DEV(0x2e, F71869AD_SP1) - -/* - * Possible AGESA_STATUS values: - * - * 0x0 = AGESA_SUCCESS - * 0x1 = AGESA_UNSUPPORTED - * 0x2 = AGESA_BOUNDS_CHK - * 0x3 = AGESA_ALERT - * 0x4 = AGESA_WARNING - * 0x5 = AGESA_ERROR - * 0x6 = AGESA_CRITICAL - * 0x7 = AGESA_FATAL - */ - - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* - * All cores: allow caching of flash chip code and data - * (there are no cache-as-ram reliability concerns with family 14h) - */ - __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); - __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); - - /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ - __writemsr (0xc0010062, 0); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - sb_Poweron_Init(); - - post_code(0x31); - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x35); - AGESAWRAPPER(amdinitmmio); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - AGESAWRAPPER(amdinitpost); - - post_code(0x42); - AGESAWRAPPER(amdinitenv); - - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - post_code(0x50); - copy_and_run(); - printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/jetway/nf81_t56n_lf/BiosCallOuts.c b/src/mainboard/jetway/nf81_t56n_lf/BiosCallOuts.c new file mode 100644 index 0000000..cb94337 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/BiosCallOuts.c @@ -0,0 +1,103 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> + +#include <Lib/amdlib.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> +#include <vendorcode/amd/cimx/sb800/SB800.h> +#include <stdint.h> +#include <stdlib.h> + +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + /* Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage. + * Make sure the right speed settings are selected. + */ + ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5; + return AGESA_SUCCESS; +} + +/* PCIE slot reset control */ +static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + AGESA_STATUS Status; + uint32_t FcnData; + PCIe_SLOT_RESET_INFO *ResetInfo; + + uint32_t GpioMmioAddr; + uint32_t AcpiMmioAddr; + uint8_t Data8; + uint16_t Data16; + + FcnData = Data; + ResetInfo = ConfigPtr; + /* Get SB800 MMIO Base (AcpiMmioAddr) */ + WriteIo8(0xCD6, 0x27); + Data8 = ReadIo8(0xCD7); + Data16=Data8<<8; + WriteIo8(0xCD6, 0x26); + Data8 = ReadIo8(0xCD7); + Data16|=Data8; + AcpiMmioAddr = (uint32_t)Data16 << 16; + Status = AGESA_UNSUPPORTED; + GpioMmioAddr = AcpiMmioAddr + GPIO_BASE; + switch (ResetInfo->ResetId) + { + case 46: /* GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot */ + switch (ResetInfo->ResetControl) { + case AssertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); + Data8 &= ~(uint8_t)BIT6 ; + Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8); + Status = AGESA_SUCCESS; + break; + case DeassertSlotReset: + Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50); + Data8 |= BIT6 ; + Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8); + Status = AGESA_SUCCESS; + break; + } + break; + } + return Status; +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/Kconfig b/src/mainboard/jetway/nf81_t56n_lf/Kconfig new file mode 100644 index 0000000..ba752f8 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/Kconfig @@ -0,0 +1,98 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_JETWAY_NF81_T56N_LF + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_FINTEK_F71869AD + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_2048 + select GFXUMA + +config MAINBOARD_DIR + string + default jetway/nf81_t56n_lf + +config MAINBOARD_PART_NUMBER + string + default "NF81-T56N-LF" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 2 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n + +#config VGA_BIOS_FILE +# string "VGA BIOS path and filename" +# depends on VGA_BIOS +# default "rom/video/OntarioGenericVbios.bin" + +config VGA_BIOS_ID + string + default "1002,9806" # FUSION_G_T56N + +config SB800_AHCI_ROM + bool + default n + +config DRIVERS_PS2_KEYBOARD + bool + default y + +endif # BOARD_JETWAY_NF81_T56N_LF diff --git a/src/mainboard/jetway/nf81_t56n_lf/Makefile.inc b/src/mainboard/jetway/nf81_t56n_lf/Makefile.inc new file mode 100644 index 0000000..0630008 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/Makefile.inc @@ -0,0 +1,35 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ifeq ($(CONFIG_AHCI_BIOS),y) +stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) +cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom +pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) +pci$(stripped_ahcibios_id).rom-type := optionrom +endif + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/jetway/nf81_t56n_lf/OptionsIds.h b/src/mainboard/jetway/nf81_t56n_lf/OptionsIds.h new file mode 100644 index 0000000..cf0a4be --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcie.c b/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcie.c new file mode 100644 index 0000000..ad4934e --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcie.c @@ -0,0 +1,191 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "PlatformGnbPcieComplex.h" + +#include <string.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + **/ +void OemCustomizeInitEarly (IN OUT AMD_EARLY_PARAMS *InitEarly) +{ + AGESA_STATUS Status; + void *BrazosPcieComplexListPtr; + void *BrazosPciePortPtr; + void *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +/** + * @brief Initialize Port descriptors + */ +PCIe_PORT_DESCRIPTOR PortList [] = { + /* (PCIe port, Lanes 4, PCI Device Number 4, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, + GNB_GPP_PORT4_CHANNEL_TYPE, + 4, + GNB_GPP_PORT4_HOTPLUG_SUPPORT, + GNB_GPP_PORT4_SPEED_MODE, + GNB_GPP_PORT4_SPEED_MODE, + GNB_GPP_PORT4_LINK_ASPM, + 46) + }, + /* (PCIe port, Lanes 5, PCI Device Number 5, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, + GNB_GPP_PORT5_CHANNEL_TYPE, + 5, + GNB_GPP_PORT5_HOTPLUG_SUPPORT, + GNB_GPP_PORT5_SPEED_MODE, + GNB_GPP_PORT5_SPEED_MODE, + GNB_GPP_PORT5_LINK_ASPM, + 46) + }, + /* (PCIe port, Lanes 6, PCI Device Number 6, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, + GNB_GPP_PORT6_CHANNEL_TYPE, + 6, + GNB_GPP_PORT6_HOTPLUG_SUPPORT, + GNB_GPP_PORT6_SPEED_MODE, + GNB_GPP_PORT6_SPEED_MODE, + GNB_GPP_PORT6_LINK_ASPM, + 46) + }, + /* (PCIe port, Lanes 7, PCI Device Number 7, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, + GNB_GPP_PORT7_CHANNEL_TYPE, + 7, + GNB_GPP_PORT7_HOTPLUG_SUPPORT, + GNB_GPP_PORT7_SPEED_MODE, + GNB_GPP_PORT7_SPEED_MODE, + GNB_GPP_PORT7_LINK_ASPM, + 0) + }, + /* (PCIe port, Lanes 8, PCI Device Number 8, ...) */ + { + /* Descriptor flags. IMPORTANT! Terminate last element of array */ + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, + GNB_GPP_PORT8_CHANNEL_TYPE, + 8, + GNB_GPP_PORT8_HOTPLUG_SUPPORT, + GNB_GPP_PORT8_SPEED_MODE, + GNB_GPP_PORT8_SPEED_MODE, + GNB_GPP_PORT8_LINK_ASPM, + 0) + } +}; + +/** + * @brief Initialize Ddi descriptors + */ +PCIe_DDI_DESCRIPTOR DdiList [] = { + /* (DDI interface Lanes 8:11, DdA, ...) */ + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + /* PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) */ + {ConnectorTypeLvds, Aux1, Hdp1} + }, + /* (DDI interface Lanes 12:15, DdB, ...) */ + { + /* Descriptor flags. IMPORTANT! Terminate last element of array */ + DESCRIPTOR_TERMINATE_LIST, + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + /* PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) */ + {ConnectorTypeDP, Aux2, Hdp2} + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + /** + * @brief GNB PCIe topology Porting + * + * Allocate buffer for + * PCIe_COMPLEX_DESCRIPTOR, PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + */ + AllocHeapParams.RequestedBufferSize = + sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + + /** + * Could not allocate buffer for + * PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + */ + if (Status!= AGESA_SUCCESS) { + ASSERT(FALSE); + return; + } + + BrazosPcieComplexListPtr = + (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + ((PCIe_COMPLEX_DESCRIPTOR *) BrazosPcieComplexListPtr)->PciePortList = + (PCIe_PORT_DESCRIPTOR *) BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR *) BrazosPcieComplexListPtr)->DdiLinkList = + (PCIe_DDI_DESCRIPTOR *) BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcieComplex.h b/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..dd6f7d7 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/PlatformGnbPcieComplex.h @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include <vendorcode/amd/agesa/f14/AGESA.h> +#include <vendorcode/amd/agesa/f14/Lib/amdlib.h> + +/** + * @brief Graphic NorthBridge (GNB) General Purpose Port (GPP) + * + * GNB_GPP_PORT?_PORT_PRESENT + * 0:Disable 1:Enable + * + * GNB_GPP_PORT?_SPEED_MODE + * 0:Auto 1:GEN1 2:GEN2 + * + * GNB_GPP_PORT?_LINK_ASPM + * 0:Disable 1:L0s 2:L1 3:L0s+L1 + * + * GNB_GPP_PORT?_CHANNEL_TYPE - + * 0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + * 3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) + * + * GNB_GPP_PORT?_HOTPLUG_SUPPORT + * 0:Disable 1:Basic 3:Enhanced + */ + +/* GNB GPP 4 */ +#define GNB_GPP_PORT4_PORT_PRESENT 1 +#define GNB_GPP_PORT4_SPEED_MODE 2 +#define GNB_GPP_PORT4_LINK_ASPM 3 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 + +/* GNB GPP 5 */ +#define GNB_GPP_PORT5_PORT_PRESENT 1 +#define GNB_GPP_PORT5_SPEED_MODE 2 +#define GNB_GPP_PORT5_LINK_ASPM 3 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 + +/* GNB GPP 6 */ +#define GNB_GPP_PORT6_PORT_PRESENT 1 +#define GNB_GPP_PORT6_SPEED_MODE 2 +#define GNB_GPP_PORT6_LINK_ASPM 3 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 + +/* GNB GPP 7 */ +#define GNB_GPP_PORT7_PORT_PRESENT 0 +#define GNB_GPP_PORT7_SPEED_MODE 2 +#define GNB_GPP_PORT7_LINK_ASPM 3 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 + +/* GNB GPP 8 */ +#define GNB_GPP_PORT8_PORT_PRESENT 1 +#define GNB_GPP_PORT8_SPEED_MODE 2 +#define GNB_GPP_PORT8_LINK_ASPM 3 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 + +void OemCustomizeInitEarly (IN OUT AMD_EARLY_PARAMS *InitEarly); + +#endif /* _PLATFORM_GNB_PCIE_COMPLEX_H */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/gpe.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/gpe.asl new file mode 100644 index 0000000..bb47ded --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/gpe.asl @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Scope(_GPE) { /* Start Scope GPE */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } +} /* End Scope GPE */ + +/* Contains the GPEs for USB overcurrent */ +#include "usb_oc.asl" diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/mainboard.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/mainboard.asl new file mode 100644 index 0000000..1f532cf --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/mainboard.asl @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Data to be patched by the BIOS during POST */ +/* FIXME the patching is not done yet! */ +/* Memory related values */ +Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ +Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ +Name(PBLN, 0x0) /* Length of BIOS area */ + +Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ +Name(HPBA, 0xFED00000) /* Base address of HPET table */ + +Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + +/* Some global data */ +Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ +Name(OSV, Ones) /* Assume nothing */ +Name(PMOD, One) /* Assume APIC */ + +Scope(_SB) { + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } +} + +Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } +} /* End Scope SI */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/routing.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/routing.asl new file mode 100644 index 0000000..0395700 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/routing.asl @@ -0,0 +1,340 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* OHCI, dev 18, 19, 22 func 0 + * EHCI, dev 18, 19, 22 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */ + Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */ + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* OHCI, dev 18, 19, 22 func 0 + * EHCI, dev 18, 19, 22 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */ + Package(){0x0003FFFF, 0, 0, 0x14 }, + Package(){0x0003FFFF, 1, 0, 0x15 }, + Package(){0x0003FFFF, 2, 0, 0x16 }, + Package(){0x0003FFFF, 3, 0, 0x17 }, + Package(){0x0004FFFF, 0, 0, 0x15 }, + Package(){0x0004FFFF, 1, 0, 0x16 }, + Package(){0x0004FFFF, 2, 0, 0x17 }, + Package(){0x0004FFFF, 3, 0, 0x14 }, + Package(){0x0005FFFF, 0, 0, 0x16 }, + Package(){0x0005FFFF, 1, 0, 0x17 }, + Package(){0x0005FFFF, 2, 0, 0x14 }, + Package(){0x0005FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/sata.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/sleep.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/sleep.asl new file mode 100644 index 0000000..5d0f8f0 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/sleep.asl @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) +} /* End Method(_PTS) */ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) +} /* End Method(_WAK) */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/superio.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/superio.asl new file mode 100644 index 0000000..6dcb877 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/superio.asl @@ -0,0 +1,22 @@ +/* + * Super I/O devices + * + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/thermal.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/thermal.asl new file mode 100644 index 0000000..2f50475 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/thermal.asl @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Thermal Zones have been #if 0 for a long time. + * Removing it for now because it doesn't seem to + * do anything when enabled anyway. + */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi/usb_oc.asl b/src/mainboard/jetway/nf81_t56n_lf/acpi/usb_oc.asl new file mode 100644 index 0000000..0429ac7 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi/usb_oc.asl @@ -0,0 +1,174 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ + +/* USB overcurrent mapping pins. */ +Name(UOM0, 0) +Name(UOM1, 2) +Name(UOM2, 0) +Name(UOM3, 7) +Name(UOM4, 2) +Name(UOM5, 2) +Name(UOM6, 6) +Name(UOM7, 2) +Name(UOM8, 6) +Name(UOM9, 6) + +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/acpi_tables.c b/src/mainboard/jetway/nf81_t56n_lf/acpi_tables.c new file mode 100644 index 0000000..95f2a0e --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" + +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <console/console.h> +#include <cpu/amd/amdfam14.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * FIXME: remove this work-around and url.. WinXP is EOL'ed any way. + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS - it needs 64 bit alignment */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* The DSDT needs additional work for the AGESA SSDT Pstate table */ + /* Keep the comment for a while. */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + } else { + printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); + } + + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.c b/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.c new file mode 100644 index 0000000..31c8e72 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.c @@ -0,0 +1,567 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "PlatformGnbPcieComplex.h" + +#define __SIMPLE_DEVICE__ + +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <stdint.h> +#include <string.h> + +#include <cpu/amd/agesa/s3_resume.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#define MMCONF_ENABLE 1 + +/* ACPI table pointers returned by AmdInitLate */ +void *DmiTable = NULL; +void *AcpiPstate = NULL; +void *AcpiSrat = NULL; +void *AcpiSlit = NULL; + +void *AcpiWheaMce = NULL; +void *AcpiWheaCmc = NULL; +void *AcpiAlib = NULL; + +AGESA_STATUS agesawrapper_amdinitcpuio(void) +{ + pci_devfn_t dev; + msr_t msr; + uint32_t reg32; + + dev = PCI_DEV(0, 0x18, 1); + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + pci_io_write_config32(dev, 0xf4, 1); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + * Last address before processor local APIC at FEE00000 + */ + pci_io_write_config32(dev, 0x84, 0x00fedf00 | (1 << 7)); + + /* Lowest NP address is HPET at FED00000 */ + pci_io_write_config32(dev, 0x80, (0xfed00000 >> 8) | 3); + + /* Map the remaining PCI hole as posted MMIO */ + pci_io_write_config32(dev, 0x8C, 0x00fecf00); + + msr = rdmsr(0xc001001a); + reg32 = (msr.hi << 24) | (msr.lo >> 8) | 3; /* Equivalent to msr >> 8 */ + pci_io_write_config32(dev, 0x88, reg32); + + /* Send all IO (0000-FFFF) to southbridge. */ + pci_io_write_config32(dev, 0xc4, 0x0000f000); + pci_io_write_config32(dev, 0xc0, 0x00000003); + + return AGESA_SUCCESS; +} + +AGESA_STATUS agesawrapper_amdinitmmio(void) +{ + uint64_t MsrReg; + uint32_t PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + uint8_t BusRangeVal = 0; + uint8_t BusNum; + uint8_t Index; + + /* + * Set the MMIO Configuration Base Address and Bus Range onto MMIO + * configuration base Address MSR register. + */ + + for (Index = 0; Index < 8; Index++) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1) { + BusRangeVal = Index; + break; + } + } + + MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (uint64_t)(BusRangeVal << 2) | MMCONF_ENABLE); + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000ull; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set Ontario Link Data */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); + PciData = 0x01308002; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); + PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + return AGESA_SUCCESS; +} + +AGESA_STATUS agesawrapper_amdinitreset(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + uint32_t PciValue; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + /* Write to D1F0x18 */ + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x00010100; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Legacy Bridge Mode + * Modify B1D5F0x18 + */ + PciAddress.Address.Bus = 1; + PciAddress.Address.Device = 5; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Legacy Bridge Mode + * Modify B1D5F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Pcie Mode + * Modify B0D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Pcie Mode + * Modify B0D1F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Base and Limit Address + * Modify B0D1F0x20 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x20; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96009600; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Prefetchable Memory Limit and Base + * Modify B0D1F0x24 + */ + PciAddress.Address.Register = 0x24; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x8FF18001; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +void * agesawrapper_getlateinitptr(int pick) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS * AmdLateParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + status = AmdInitLate (AmdLateParamsPtr); + if (status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" + " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" + " Mce:%p\n Cmc:%p\n Alib:%p\n", + __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, + AcpiWheaMce, AcpiWheaCmc, AcpiAlib); + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return status; +} + +AGESA_STATUS agesawrapper_amdinitresume(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amds3laterestore(void) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(status == AGESA_SUCCESS); + } + + return status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_amdS3Save(void) +{ + AGESA_STATUS status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + AmdCreateStruct(&AmdInterfaceParams); + + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + status = AmdS3Save (AmdS3SaveParamsPtr); + if (status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + + status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage + ); + } + + OemAgesaSaveMtrr(); + AmdReleaseStruct (&AmdInterfaceParams); + + return status; +} +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + uint32_t Func, + uint32_t Data, + void *ConfigPtr + ) +{ + AGESA_STATUS status; + AP_EXE_PARAMS ApExeParams; + + memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + status = AmdLateRunApTask (&ApExeParams); + if (status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(status == AGESA_SUCCESS); + } + + return status; +} + +AGESA_STATUS agesawrapper_amdreadeventlog(void) +{ + AGESA_STATUS status; + EVENT_PARAMS AmdEventParams; + + memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + status = AmdReadEventLog (&AmdEventParams); + } + + return status; +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.h b/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.h new file mode 100644 index 0000000..720f3be --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/agesawrapper.h @@ -0,0 +1,62 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include <vendorcode/amd/agesa/f14/AGESA.h> + + +/** + * Define AMD Ontario APU SSID/SVID + */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /**< DMI Interface */ + PICK_PSTATE, /**< Acpi Pstate SSDT Table */ + PICK_SRAT, /**< SRAT Table */ + PICK_SLIT, /**< SLIT Table */ + PICK_WHEA_MCE, /**< WHEA MCE table */ + PICK_WHEA_CMC, /**< WHEA CMV table */ + PICK_ALIB, /**< SACPI SSDT table with ALIB implementation */ +}; + + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); + +AGESA_STATUS agesawrapper_amdreadeventlog(void); + +AGESA_STATUS agesawrapper_amdinitcpuio(void); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); +AGESA_STATUS agesawrapper_amdlaterunaptask(uint32_t, uint32_t, void *); +void * agesawrapper_getlateinitptr(int); + +#endif /* _AGESAWRAPPER_H_ */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/board_info.txt b/src/mainboard/jetway/nf81_t56n_lf/board_info.txt new file mode 100644 index 0000000..0253ea2 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/board_info.txt @@ -0,0 +1,6 @@ +Board URL: http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=822&proname=NF81... +Category: mini +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/jetway/nf81_t56n_lf/buildOpts.c b/src/mainboard/jetway/nf81_t56n_lf/buildOpts.c new file mode 100644 index 0000000..8d8bbec --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/buildOpts.c @@ -0,0 +1,347 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> + +#include <vendorcode/amd/agesa/f14/AGESA.h> + +/* Include the files that instantiate the configuration definitions. */ +#include <vendorcode/amd/agesa/f14/Include/AdvancedApi.h> +#include <vendorcode/amd/agesa/f14/Include/CommonReturns.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/cpuFamilyTranslation.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/Feature/cpuFeatures.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> +/* AGESA nonesense: the next two headers depend on heapManager.h */ +#include <vendorcode/amd/agesa/f14/Proc/Common/CreateStruct.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/cpuEarlyInit.h> +/* These tables are optional and may be used to adjust memory timing settings */ +#include <vendorcode/amd/agesa/f14/Proc/Mem/mm.h> +#include <vendorcode/amd/agesa/f14/Proc/Mem/mn.h> + +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/** + * AGESA optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE + #define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT FALSE +#define BLDOPT_REMOVE_SLIT FALSE +#define BLDOPT_REMOVE_WHEA FALSE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * AGESA entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE TRUE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO FALSE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/** + * AGESA configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ + +/* The fixed MTRR values to be set after memory initialization. */ +const AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/** + * @brief Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + */ + +/* + * This is the delivery package title, "BrazosPI" + * This string MUST be exactly 8 characters long + */ +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + +/* This is the release version number of the AGESA component + * This string MUST be exactly 12 characters long + */ +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 /**< DDR 400 */ +#define DDR533_FREQUENCY 266 /**< DDR 533 */ +#define DDR667_FREQUENCY 333 /**< DDR 667 */ +#define DDR800_FREQUENCY 400 /**< DDR 800 */ +#define DDR1066_FREQUENCY 533 /**< DDR 1066 */ +#define DDR1333_FREQUENCY 667 /**< DDR 1333 */ +#define DDR1600_FREQUENCY 800 /**< DDR 1600 */ +#define DDR1866_FREQUENCY 933 /**< DDR 1866 */ +#define UNSUPPORTED_DDR_FREQUENCY 934 /**< Max limit of DDR frequency */ + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 /**< Quadrank registered DIMM */ +#define QUADRANK_UNBUFFERED 1 /**< Quadrank unbuffered DIMM */ + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 /**< Use best rate possible */ +#define TIMING_MODE_LIMITED 1 /**< Set user top limit */ +#define TIMING_MODE_SPECIFIC 2 /**< Set user specified speed */ + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 /**< Channel power down mode */ +#define POWER_DOWN_BY_CHIP_SELECT 1 /**< Chip select power down mode */ + +/** + * The following definitions specify the default values for various parameters + * in which there are no clearly defined defaults to be used in the common + * file. The values below are based on product and BKDG content. + */ +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +/* AGESA nonsense: this header depends on the definitions above */ +/* Instantiate all solution relevant data. */ +#include <vendorcode/amd/agesa/f14/Include/PlatformInstall.h> + +/** + * @brief Customer Overides Memory Table + * + * Platform Specific Overriding Table allows IBV/OEM to pass in platform + * information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). + * If PlatformSpecificTable is populated, AGESA will base its settings on the + * data from the table. Otherwise, it will use its default conservative settings. + */ +const PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + + +/* DA Customer table */ +const uint8_t AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + NBACCESS (MTEnd, 0, 0, 0, 0, 0), /* End of Table */ +}; +const uint8_t SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); diff --git a/src/mainboard/jetway/nf81_t56n_lf/cmos.layout b/src/mainboard/jetway/nf81_t56n_lf/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/jetway/nf81_t56n_lf/devicetree.cb b/src/mainboard/jetway/nf81_t56n_lf/devicetree.cb new file mode 100644 index 0000000..8f4d3b3 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/devicetree.cb @@ -0,0 +1,151 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] +# device pci 1.1 on end # Internal Audio P2P bridge 0x1314 + device pci 4.0 on end # PCIE P2P bridge PCIe slot + device pci 5.0 off end # PCIE P2P bridge + device pci 6.0 on end # GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) + device pci 7.0 off end # PCIE P2P bridge + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f71869ad + register "multi_function_register_1" = "0x01" + register "multi_function_register_2" = "0x6f" + register "multi_function_register_3" = "0x24" + register "multi_function_register_4" = "0x00" + register "multi_function_register_5" = "0x60" +# HWM configuration registers + register "hwm_smbus_address" = "0x98" + register "hwm_smbus_control_reg" = "0x02" + register "hwm_fan_type_sel_reg" = "0x00" + register "hwm_fan1_temp_adj_rate_reg" = "0x33" + register "hwm_fan_mode_sel_reg" = "0x07" + register "hwm_fan1_idx_rpm_mode" = "0x0e" + register "hwm_fan1_seg1_speed_count" = "0xff" + register "hwm_fan1_seg2_speed_count" = "0x0e" + register "hwm_fan1_seg3_speed_count" = "0x07" + register "hwm_fan1_temp_map_sel" = "0x8c" +# +# XXX: 4e is the default index port and .xy is the +# LDN indexing the pnp_info array found in the superio.c +# NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124, +# see page 18 from Fintek F71869 V1.1 datasheet. + device pnp 2e.00 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.01 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end +# COM2 not physically wired on board. + device pnp 2e.02 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.03 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.04 on # Hardware Monitor + io 0x60 = 0x225 # Fintek datasheet says 0x295. + irq 0x70 = 0 + end + device pnp 2e.05 on # KBC + io 0x60 = 0x060 + irq 0x70 = 1 # Keyboard IRQ + irq 0x72 = 12 # Mouse IRQ + end + device pnp 2e.06 off end # GPIO + device pnp 2e.07 on end # WDT + device pnp 2e.08 off end # CIR + device pnp 2e.0a on end # PME + end # f71869ad + end #LPC + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # OHCI FS/LS USB (0x4399) + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) + device pci 15.1 on end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 (0x4397) + device pci 16.2 on end # EHCI USB 10-13 (0x4396) + register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - PortA-D on 15.0-3 are each x1 lanes. + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + +# +# TODO: Verify the proper SocketId/MemChannelId/DimmId addresses of the SPD +# with i2cdump tool. +# Notes: 0xa0=0x50*2, 0xa2=0x51*2.. 0x50-0x54 are usually RAM modules on the SMBus. +# + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/jetway/nf81_t56n_lf/dsdt.asl b/src/mainboard/jetway/nf81_t56n_lf/dsdt.asl new file mode 100644 index 0000000..a650bca --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/dsdt.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "JETWAY", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + #include "acpi/mainboard.asl" + + #include <cpu/amd/agesa/family14/acpi/cpu.asl> + + #include "acpi/routing.asl" + + Scope(_SB) { + /* global utility methods expected within the _SB scope */ + #include <arch/x86/acpi/globutil.asl> + + Device(PCI0) { + + /* Describe the AMD Northbridge */ + #include <northbridge/amd/agesa/family14/acpi/northbridge.asl> + + /* Describe the AMD Fusion Controller Hub Southbridge */ + #include <southbridge/amd/cimx/sb800/acpi/fch.asl> + + } + } /* End Scope(_SB) */ + + /* Contains the supported sleep states for this chipset */ + #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl> + + /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */ + #include "acpi/sleep.asl" + + #include "acpi/gpe.asl" + #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> + #include "acpi/thermal.asl" + #include "acpi/superio.asl" +} +/* End of ASL file */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/irq_tables.c b/src/mainboard/jetway/nf81_t56n_lf/irq_tables.c new file mode 100644 index 0000000..94a69f9 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/irq_tables.c @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <cpu/amd/amdfam14.h> +#include <device/pci_def.h> +#include <string.h> +#include <stdint.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align table on 16 byte boundary. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* PCI Bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/mainboard.c b/src/mainboard/jetway/nf81_t56n_lf/mainboard.c new file mode 100644 index 0000000..d67e072 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/mainboard.c @@ -0,0 +1,184 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <northbridge/amd/agesa/BiosCallOuts.h> + +#include <arch/acpi.h> +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_def.h> + +#include <southbridge/amd/amd_pci_util.h> +#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> +#include <southbridge/amd/cimx/sb800/pci_devs.h> +#include <southbridge/amd/cimx/cimx_util.h> +#include <northbridge/amd/agesa/family14/pci_devs.h> + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. TODO: Make ACPI use these values too. + * + * The Persimmon PCI INTA/B/C/D pins are connected to + * FCH pins INTE/F/G/H on the schematic so these need + * to be routed as well. + */ +static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */ + [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, + /* IMC INT0 - 5 */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/20/22 INTA-C */ + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, + /* IDE, SATA */ + [0x40] = 0x0B,0x0B, + /* GPPInt0 - 3 */ + [0x50] = 0x0A,0x0B,0x0A,0x0B +}; + +static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + /* INTA# - INTH# */ + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, + /* Misc-nil,0,1,2, INT from Serial irq */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, + /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F, + /* IMC INT0 - 5 */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, + /* USB Devs 18/19/22/20 INTA-C */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, + /* IDE, SATA */ + [0x40] = 0x11,0x13, + /* GPPInt0 - 3 */ + [0x50] = 0x10,0x11,0x12,0x13 +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +/* + * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H + * but because PCI INT_PIN swizzling isnt implemented to match + * the IDSEL (dev 3) of the slot, the table is adjusted for the + * swizzle and INTA is connected to PIRQH so PINA/B/C/D on + * off-chip devices should get mapped to PIRQH/E/F/G. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ + {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ + {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */ + {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */ + {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ + {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + + /* enable GPP CLK0 thru CLK3 (interleaved) */ + /* disable GPP CLK4 thru SLT_GFX_CLK */ + u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); + *(misc_mem_clk_cntrl + 0) = 0xFF; + *(misc_mem_clk_cntrl + 1) = 0xFF; + *(misc_mem_clk_cntrl + 2) = 0x00; + *(misc_mem_clk_cntrl + 3) = 0x00; + *(misc_mem_clk_cntrl + 4) = 0x00; + + /* + * Initialize ASF registers to an arbitrary address because someone + * long ago set things up this way inside the SPD read code. The + * SPD read code has been made generic and moved out of the board + * directory, so the ASF init is being done here. + */ + pm_iowrite(0x29, 0x80); + pm_iowrite(0x28, 0x61); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/jetway/nf81_t56n_lf/mptable.c b/src/mainboard/jetway/nf81_t56n_lf/mptable.c new file mode 100644 index 0000000..4390605 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/mptable.c @@ -0,0 +1,155 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/smp/mpspec.h> +#include <console/console.h> +#include <cpu/amd/amdfam14.h> +#include <device/pci.h> +#include <drivers/generic/ioapic/chip.h> +#include <stdint.h> +#include <string.h> + +#include <southbridge/amd/amd_pci_util.h> +#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> + + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + /* Intialize the MP_Table */ + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + /* + * Type 0: Processor Entries: + * LAPIC ID, LAPIC Version, CPU Flags:EN/BP, + * CPU Signature (Stepping, Model, Family), + * Feature Flags + */ + smp_write_processors(mc); + + /* + * Type 1: Bus Entries: + * Bus ID, Bus Type + */ + mptable_write_buses(mc, NULL, &bus_isa); + + /* + * Type 2: I/O APICs: + * APIC ID, Version, APIC Flags:EN, Address + */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + /* + * Type 3: I/O Interrupt Table Entries: + * Int Type, Int Polarity, Int Level, Source Bus ID, + * Source Bus IRQ, Dest APIC ID, Dest PIN# + */ + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device */ + PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]); + PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]); + + /* SMBUS / ACPI */ + PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]); + + /* Southbridge HD Audio */ + PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]); + + /* LPC */ + PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]); + + /* USB */ + PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]); + PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]); + PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]); + PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]); + PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]); + + /* IDE */ + PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]); + + /* SATA */ + PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]); + + /* On-board NIC & Slot PCIE. */ + PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0 */ + PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ + PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ + PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ + PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ + } + + /* On-board Realtek NIC 2. (PCIe PortA) */ + PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */ + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */ + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */ + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */ + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */ + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/jetway/nf81_t56n_lf/platform_cfg.h b/src/mainboard/jetway/nf81_t56n_lf/platform_cfg.h new file mode 100644 index 0000000..bbd1d14 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/platform_cfg.h @@ -0,0 +1,260 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x7F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x07 + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +//#define AZALIA_SDIN_PIN 0xAA +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 0 + +/* FIXME: Verify this for sound to work! */ +static const CODECENTRY persimmon_codec_alc269[] = +{ + /* NID, PinConfig */ + {0x12, 0x411111F0}, + {0x14, 0x99130110}, + {0x21, 0x0121401F}, + {0x17, 0x411111F0}, + {0x18, 0x01A19820}, + {0x19, 0x411111F0}, + {0x1A, 0x0181302F}, + {0x1B, 0x411111F0}, + {0x1D, 0x40069E05}, + {0x1E, 0x411111F0}, + {0x20, 0x0001FFFF}, + {0xff, 0xffffffff} /* end of table */ +}; + +/* FIXME: Verify this for sound to work! */ +static const CODECTBLLIST codec_tablelist[] = +{ + {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]}, + {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL} +}; + +/** + * @def AZALIA_OEM_VERB_TABLE + * Mainboard specific codec verb table list + */ +#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) + +/* set up an ACPI preferred power management profile */ +/* from acpi.h + * PM_UNSPECIFIED = 0, + * PM_DESKTOP = 1, + * PM_MOBILE = 2, + * PM_WORKSTATION = 3, + * PM_ENTERPRISE_SERVER = 4, + * PM_SOHO_SERVER = 5, + * PM_APPLIANCE_PC = 6, + * PM_PERFORMANCE_SERVER = 7, + * PM_TABLET = 8 + */ +#define FADT_PM_PROFILE 1 + +#endif /* _PLATFORM_CFG_H_ */ diff --git a/src/mainboard/jetway/nf81_t56n_lf/romstage.c b/src/mainboard/jetway/nf81_t56n_lf/romstage.c new file mode 100644 index 0000000..7f91714 --- /dev/null +++ b/src/mainboard/jetway/nf81_t56n_lf/romstage.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Edward O'Callaghan eocallaghan@alterapraxis.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> + +#include <arch/acpi.h> +#include <arch/cpu.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/bist.h> + +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <stdint.h> +#include <string.h> + +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/cache.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/car.h> +#include <sb_cimx.h> +#include <southbridge/amd/cimx/sb800/SBPLATFORM.h> +#include <superio/fintek/common/fintek.h> +#include <superio/fintek/f71869ad/f71869ad.h> + +/* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */ +#define SERIAL_DEV PNP_DEV(0x2e, F71869AD_SP1) + +/* + * Possible AGESA_STATUS values: + * + * 0x0 = AGESA_SUCCESS + * 0x1 = AGESA_UNSUPPORTED + * 0x2 = AGESA_BOUNDS_CHK + * 0x3 = AGESA_ALERT + * 0x4 = AGESA_WARNING + * 0x5 = AGESA_ERROR + * 0x6 = AGESA_CRITICAL + * 0x7 = AGESA_FATAL + */ + + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ + __writemsr (0xc0010062, 0); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x35); + AGESAWRAPPER(amdinitmmio); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + AGESAWRAPPER(amdinitpost); + + post_code(0x42); + AGESAWRAPPER(amdinitenv); + + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/jetway/pa78vm5/Kconfig b/src/mainboard/jetway/pa78vm5/Kconfig deleted file mode 100644 index 8d007a4..0000000 --- a/src/mainboard/jetway/pa78vm5/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_JETWAY_PA78VM5 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2R2 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_RS780 - select SOUTHBRIDGE_AMD_SB700 - select SUPERIO_FINTEK_F71863FG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select LIFT_BSP_APIC_ID - select AMDMCT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select GFXUMA - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default jetway/pa78vm5 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "PA78VM5 (Fam10)" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_010000b6.h" - -config RAMTOP - hex - default 0x2000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -endif # BOARD_JETWAY_PA78VM5 diff --git a/src/mainboard/jetway/pa78vm5/acpi/cpstate.asl b/src/mainboard/jetway/pa78vm5/acpi/cpstate.asl deleted file mode 100644 index fa77568..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi/cpstate.asl +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file defines the processor and performance state capability - * for each core in the system. It is included into the DSDT for each - * core. It assumes that each core of the system has the same performance - * characteristics. -*/ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) - { - Scope (_PR) { - Processor(CPU0,0,0x808,0x06) { - #include "cpstate.asl" - } - Processor(CPU1,1,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU2,2,0x0,0x0) { - #include "cpstate.asl" - } - Processor(CPU3,3,0x0,0x0) { - #include "cpstate.asl" - } - } -*/ - /* P-state support: The maximum number of P-states supported by the */ - /* CPUs we'll use is 6. */ - /* Get from AMI BIOS. */ - Name(_PSS, Package(){ - Package () - { - 0x00000AF0, - 0x0000BF81, - 0x00000002, - 0x00000002, - 0x00000000, - 0x00000000 - }, - - Package () - { - 0x00000578, - 0x000076F2, - 0x00000002, - 0x00000002, - 0x00000001, - 0x00000001 - } - }) - - Name(_PCT, Package(){ - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, - ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} - }) - - Method(_PPC, 0){ - Return(0) - } diff --git a/src/mainboard/jetway/pa78vm5/acpi/ide.asl b/src/mainboard/jetway/pa78vm5/acpi/ide.asl deleted file mode 100644 index 3283f6f..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/jetway/pa78vm5/acpi/routing.asl b/src/mainboard/jetway/pa78vm5/acpi/routing.asl deleted file mode 100644 index bbcc61d..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi/routing.asl +++ /dev/null @@ -1,311 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTA, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - Package(){0x0012FFFF, 2, INTC, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTD, 0 }, - Package(){0x0013FFFF, 2, INTA, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, 0, 17 }, */ - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - /* Package(){0x0006FFFF, 0, 0, 18 }, */ - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - /* Package(){0x0007FFFF, 0, 0, 19 }, */ - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - /* Package(){0x0009FFFF, 1, 0, 16 }, */ - /* Package(){0x0009FFFF, 2, 0, 17 }, */ - /* Package(){0x0009FFFF, 3, 0, 18 }, */ - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - /* Package(){0x000AFFFF, 1, 0, 16 }, */ - /* Package(){0x000AFFFF, 2, 0, 17 }, */ - /* Package(){0x000AFFFF, 3, 0, 18 }, */ - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 16 }, - Package(){0x0012FFFF, 1, 0, 17 }, - Package(){0x0012FFFF, 2, 0, 18 }, - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 19 }, - Package(){0x0013FFFF, 2, 0, 16 }, - - /* Package(){0x00140000, 0, 0, 16 }, */ - - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/jetway/pa78vm5/acpi/sata.asl b/src/mainboard/jetway/pa78vm5/acpi/sata.asl deleted file mode 100644 index 49201ad..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/jetway/pa78vm5/acpi/usb.asl b/src/mainboard/jetway/pa78vm5/acpi/usb.asl deleted file mode 100644 index 5c34a0e..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/jetway/pa78vm5/acpi_tables.c b/src/mainboard/jetway/pa78vm5/acpi_tables.c deleted file mode 100644 index 1c5404f..0000000 --- a/src/mainboard/jetway/pa78vm5/acpi_tables.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern const unsigned char AmlCode[]; -extern const unsigned char AmlCode_ssdt[]; - -#if CONFIG_ACPI_SSDTX_NUM >= 1 -extern const unsigned char AmlCode_ssdt2[]; -extern const unsigned char AmlCode_ssdt3[]; -extern const unsigned char AmlCode_ssdt4[]; -extern const unsigned char AmlCode_ssdt5[]; -#endif - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB700 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; -#if CONFIG_ACPI_SSDTX_NUM >= 1 - acpi_header_t *ssdtx; - void *p; - int i; -#endif - - get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current += slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); - ssdt = (acpi_header_t *)current; - memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); - current += ssdt->length; - memcpy(ssdt, &AmlCode_ssdt, ssdt->length); - //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c - update_ssdt((void*)ssdt); - /* recalculate checksum */ - ssdt->checksum = 0; - ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); - acpi_add_table(rsdp,ssdt); - -#if CONFIG_ACPI_SSDTX_NUM >= 1 - - /* same htio, but different position? We may have to copy, - change HCIN, and recalculate the checknum and add_table */ - - for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink - if((sysconf.pci1234[i] & 1) != 1 ) continue; - u8 c; - if (i < 7) { - c = (u8) ('4' + i - 1); - } else { - c = (u8) ('A' + i - 1 - 6); - } - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt - ssdtx = (acpi_header_t *)current; - switch (sysconf.hcid[i]) { - case 1: - p = &AmlCode_ssdt2; - break; - case 2: - p = &AmlCode_ssdt3; - break; - case 3: /* 8131 */ - p = &AmlCode_ssdt4; - break; - default: - /* HTX no io apic */ - p = &AmlCode_ssdt5; - break; - } - memcpy(ssdtx, p, sizeof(acpi_header_t)); - current += ssdtx->length; - memcpy(ssdtx, p, ssdtx->length); - update_ssdtx((void *)ssdtx, i); - ssdtx->checksum = 0; - ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); - acpi_add_table(rsdp, ssdtx); - } -#endif - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; // it will used by fadt - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; // it will be used by fadt - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/jetway/pa78vm5/board_info.txt b/src/mainboard/jetway/pa78vm5/board_info.txt deleted file mode 100644 index 7b14dc4..0000000 --- a/src/mainboard/jetway/pa78vm5/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://www.jetway.com.tw/jw/motherboard_view.asp?productid=567&proname=P... diff --git a/src/mainboard/jetway/pa78vm5/cmos.layout b/src/mainboard/jetway/pa78vm5/cmos.layout deleted file mode 100644 index 6565c88..0000000 --- a/src/mainboard/jetway/pa78vm5/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/jetway/pa78vm5/devicetree.cb b/src/mainboard/jetway/pa78vm5/devicetree.cb deleted file mode 100644 index 783e4ae..0000000 --- a/src/mainboard/jetway/pa78vm5/devicetree.cb +++ /dev/null @@ -1,110 +0,0 @@ -# sample config for jetway/PA78VM5 -chip northbridge/amd/amdfam10/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_AM2r2 #L1 and DDR2 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3060 inherit - chip northbridge/amd/amdfam10 - device pci 18.0 on # northbridge - chip southbridge/amd/rs780 - device pci 0.0 on end # HT 0x9600 - device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 - device pci 3.0 on end # PCIE P2P bridge 0x960b - device pci 4.0 on end # PCIE P2P bridge 0x9604 - device pci 5.0 off end # PCIE P2P bridge 0x9605 - device pci 6.0 off end # PCIE P2P bridge 0x9606 - device pci 7.0 off end # PCIE P2P bridge 0x9607 - device pci 8.0 off end # NB/SB Link P2P bridge - device pci 9.0 on end # - device pci a.0 on end # - register "gppsb_configuration" = "1" # Configuration B - register "gpp_configuration" = "3" # Configuration D default - register "port_enable" = "0x6fc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "1" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB - device pci 12.1 on end # USB - device pci 12.2 on end # USB - device pci 13.0 on end # USB - device pci 13.1 on end # USB - device pci 13.2 on end # USB - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71863fg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8718f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 2 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/sb700 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end -# device pci 00.5 on end - end - end #domain - #for node 32 to node 63 - -end diff --git a/src/mainboard/jetway/pa78vm5/dsdt.asl b/src/mainboard/jetway/pa78vm5/dsdt.asl deleted file mode 100644 index 2252b16..0000000 --- a/src/mainboard/jetway/pa78vm5/dsdt.asl +++ /dev/null @@ -1,1850 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "JETWAY", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - CPU0, /* name space name */ - 0, /* Unique number for this processor */ - 0x808, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU1, /* name space name */ - 1, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU2, /* name space name */ - 2, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - - Processor( - CPU3, /* name space name */ - 3, /* Unique number for this processor */ - 0x0000, /* PBLK system I/O address !hardcoded! */ - 0x00 /* PBLKLEN for boot processor */ - ) { - #include "acpi/cpstate.asl" - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/jetway/pa78vm5/get_bus_conf.c b/src/mainboard/jetway/pa78vm5/get_bus_conf.c deleted file mode 100644 index 47342fb..0000000 --- a/src/mainboard/jetway/pa78vm5/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs780[11]; -u8 bus_sb700[2]; -u32 apicid_sb700; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs780; -u32 sbdn_sb700; - -extern void get_pci1234(void); - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs780 = sysconf.sbdn; - sbdn_sb700 = 0; - - for (i = 0; i < 2; i++) { - bus_sb700[i] = 0; - } - for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { - bus_rs780[i] = 0; - } - - bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb700[0] = bus_rs780[0]; - - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); - if (dev) { - bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs780 */ - for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { - dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); - if (dev) { - bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb700 = apicid_base + 0; -} diff --git a/src/mainboard/jetway/pa78vm5/irq_tables.c b/src/mainboard/jetway/pa78vm5/irq_tables.c deleted file mode 100644 index 87c414a..0000000 --- a/src/mainboard/jetway/pa78vm5/irq_tables.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs780[8]; -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/jetway/pa78vm5/mainboard.c b/src/mainboard/jetway/pa78vm5/mainboard.c deleted file mode 100644 index 373ebb5..0000000 --- a/src/mainboard/jetway/pa78vm5/mainboard.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" - -void set_pcie_dereset(void); -void set_pcie_reset(void); -u8 is_dev3_present(void); - -/* - * the board uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to - * pull it up before training the slot. - ***/ -void set_pcie_dereset() -{ - u16 word; - device_t sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - -void set_pcie_reset() -{ - u16 word; - device_t sm_dev; - /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - word = pci_read_config16(sm_dev, 0xA8); - word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */ - word &= ~((1 << 8) | (1 << 10)); - pci_write_config16(sm_dev, 0xA8, word); -} - -#if 0 /* not tested yet. */ -/******************************************************** -* board uses SB700 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - /*u32 sm_dev, ide_dev; */ - device_t sm_dev, ide_dev; - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} -#endif /* get_ide_dma66() */ - -u8 is_dev3_present(void) -{ - return 0; -} - -/************************************************* -* enable the dedicated function in this board. -* This function called early than rs780_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard PA78VM5 Enable. dev=0x%p\n", dev); - - set_pcie_dereset(); - /* get_ide_dma66(); */ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/jetway/pa78vm5/mptable.c b/src/mainboard/jetway/pa78vm5/mptable.c deleted file mode 100644 index 7cabdf1..0000000 --- a/src/mainboard/jetway/pa78vm5/mptable.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> - -extern u8 bus_rs780[11]; -extern u8 bus_sb700[2]; - -extern u32 apicid_sb700; - -extern u32 sbdn_rs780; -extern u32 sbdn_sb700; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb700[0], - PCI_DEVFN(sbdn_sb700 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb700, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/jetway/pa78vm5/resourcemap.c b/src/mainboard/jetway/pa78vm5/resourcemap.c deleted file mode 100644 index 78d00f8..0000000 --- a/src/mainboard/jetway/pa78vm5/resourcemap.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/jetway/pa78vm5/romstage.c b/src/mainboard/jetway/pa78vm5/romstage.c deleted file mode 100644 index 5121605..0000000 --- a/src/mainboard/jetway/pa78vm5/romstage.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#define SYSTEM_TYPE 0 /* SERVER */ -#define SYSTEM_TYPE 1 /* DESKTOP */ -//#define SYSTEM_TYPE 2 /* MOBILE */ - -//used by incoherent_ht -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 0 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include <lib.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <console/loglevel.h> -#include "cpu/x86/bist.h" -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f71863fg/f71863fg.h> -#include <cpu/amd/mtrr.h> -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/amd/rs780/early_setup.c" -#include "southbridge/amd/sb700/sb700.h" -#include "southbridge/amd/sb700/smbus.h" -#include "northbridge/amd/amdfam10/debug.c" - -#if CONFIG_TTYS0_BASE == 0x2f8 -#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP2) -#else -#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1) -#endif - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" -#include <spd.h> - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - u32 bsp_apicid = 0, val; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sb7xx_51xx_pci_port80(); - } - - post_code(0x30); - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ - /* All cores run this but the BSP(node0,core0) is the only core that returns. */ - } - - post_code(0x32); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // Load MPB - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - It would be nice to fixup prink spinlocks for ROM XIP mode. - I think it could be done by putting the spinlock flag in the cache - of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - - #if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); - #endif - - post_code(0x38); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - rs780_htinit(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x40); - -// die("Die Before MCT init."); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - -/* - dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); - dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); -*/ - -// die("After MCT init before CAR disabled."); - - rs780_before_pci_init(); - sb7xx_51xx_before_pci_init(); - - post_code(0x42); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/jetway/pa78vm5_fam10/Kconfig b/src/mainboard/jetway/pa78vm5_fam10/Kconfig new file mode 100644 index 0000000..f3fed72 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/Kconfig @@ -0,0 +1,76 @@ +if BOARD_JETWAY_PA78VM5_FAM10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2R2 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_RS780 + select SOUTHBRIDGE_AMD_SB700 + select SUPERIO_FINTEK_F71863FG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select LIFT_BSP_APIC_ID + select AMDMCT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select GFXUMA + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default jetway/pa78vm5_fam10 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "PA78VM5 (Fam10)" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_010000b6.h" + +config RAMTOP + hex + default 0x2000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +endif # BOARD_JETWAY_PA78VM5_FAM10 diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi/cpstate.asl b/src/mainboard/jetway/pa78vm5_fam10/acpi/cpstate.asl new file mode 100644 index 0000000..fa77568 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi/cpstate.asl @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file defines the processor and performance state capability + * for each core in the system. It is included into the DSDT for each + * core. It assumes that each core of the system has the same performance + * characteristics. +*/ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001) + { + Scope (_PR) { + Processor(CPU0,0,0x808,0x06) { + #include "cpstate.asl" + } + Processor(CPU1,1,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU2,2,0x0,0x0) { + #include "cpstate.asl" + } + Processor(CPU3,3,0x0,0x0) { + #include "cpstate.asl" + } + } +*/ + /* P-state support: The maximum number of P-states supported by the */ + /* CPUs we'll use is 6. */ + /* Get from AMI BIOS. */ + Name(_PSS, Package(){ + Package () + { + 0x00000AF0, + 0x0000BF81, + 0x00000002, + 0x00000002, + 0x00000000, + 0x00000000 + }, + + Package () + { + 0x00000578, + 0x000076F2, + 0x00000002, + 0x00000002, + 0x00000001, + 0x00000001 + } + }) + + Name(_PCT, Package(){ + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}, + ResourceTemplate(){Register(FFixedHW, 0, 0, 0)} + }) + + Method(_PPC, 0){ + Return(0) + } diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi/ide.asl b/src/mainboard/jetway/pa78vm5_fam10/acpi/ide.asl new file mode 100644 index 0000000..3283f6f --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi/routing.asl b/src/mainboard/jetway/pa78vm5_fam10/acpi/routing.asl new file mode 100644 index 0000000..bbcc61d --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi/routing.asl @@ -0,0 +1,311 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTA, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + Package(){0x0012FFFF, 2, INTC, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTD, 0 }, + Package(){0x0013FFFF, 2, INTA, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, 0, 17 }, */ + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + /* Package(){0x0006FFFF, 0, 0, 18 }, */ + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + /* Package(){0x0007FFFF, 0, 0, 19 }, */ + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + /* Package(){0x0009FFFF, 1, 0, 16 }, */ + /* Package(){0x0009FFFF, 2, 0, 17 }, */ + /* Package(){0x0009FFFF, 3, 0, 18 }, */ + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + /* Package(){0x000AFFFF, 1, 0, 16 }, */ + /* Package(){0x000AFFFF, 2, 0, 17 }, */ + /* Package(){0x000AFFFF, 3, 0, 18 }, */ + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 16 }, + Package(){0x0012FFFF, 1, 0, 17 }, + Package(){0x0012FFFF, 2, 0, 18 }, + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 19 }, + Package(){0x0013FFFF, 2, 0, 16 }, + + /* Package(){0x00140000, 0, 0, 16 }, */ + + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi/sata.asl b/src/mainboard/jetway/pa78vm5_fam10/acpi/sata.asl new file mode 100644 index 0000000..49201ad --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi/usb.asl b/src/mainboard/jetway/pa78vm5_fam10/acpi/usb.asl new file mode 100644 index 0000000..5c34a0e --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/acpi_tables.c b/src/mainboard/jetway/pa78vm5_fam10/acpi_tables.c new file mode 100644 index 0000000..1c5404f --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/acpi_tables.c @@ -0,0 +1,221 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern const unsigned char AmlCode[]; +extern const unsigned char AmlCode_ssdt[]; + +#if CONFIG_ACPI_SSDTX_NUM >= 1 +extern const unsigned char AmlCode_ssdt2[]; +extern const unsigned char AmlCode_ssdt3[]; +extern const unsigned char AmlCode_ssdt4[]; +extern const unsigned char AmlCode_ssdt5[]; +#endif + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB700 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + void *p; + int i; +#endif + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); + ssdt = (acpi_header_t *)current; + memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t)); + current += ssdt->length; + memcpy(ssdt, &AmlCode_ssdt, ssdt->length); + //Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c + update_ssdt((void*)ssdt); + /* recalculate checksum */ + ssdt->checksum = 0; + ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length); + acpi_add_table(rsdp,ssdt); + +#if CONFIG_ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, + change HCIN, and recalculate the checknum and add_table */ + + for(i=1;i<sysconf.hc_possible_num;i++) { // 0: is hc sblink + if((sysconf.pci1234[i] & 1) != 1 ) continue; + u8 c; + if (i < 7) { + c = (u8) ('4' + i - 1); + } else { + c = (u8) ('A' + i - 1 - 6); + } + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt + ssdtx = (acpi_header_t *)current; + switch (sysconf.hcid[i]) { + case 1: + p = &AmlCode_ssdt2; + break; + case 2: + p = &AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = &AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = &AmlCode_ssdt5; + break; + } + memcpy(ssdtx, p, sizeof(acpi_header_t)); + current += ssdtx->length; + memcpy(ssdtx, p, ssdtx->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdp, ssdtx); + } +#endif + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; // it will used by fadt + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; // it will be used by fadt + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/board_info.txt b/src/mainboard/jetway/pa78vm5_fam10/board_info.txt new file mode 100644 index 0000000..7b14dc4 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +Board URL: http://www.jetway.com.tw/jw/motherboard_view.asp?productid=567&proname=P... diff --git a/src/mainboard/jetway/pa78vm5_fam10/cmos.layout b/src/mainboard/jetway/pa78vm5_fam10/cmos.layout new file mode 100644 index 0000000..6565c88 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/jetway/pa78vm5_fam10/devicetree.cb b/src/mainboard/jetway/pa78vm5_fam10/devicetree.cb new file mode 100644 index 0000000..b7193e6 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/devicetree.cb @@ -0,0 +1,110 @@ +# sample config for jetway/PA78VM5_FAM10 +chip northbridge/amd/amdfam10/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_AM2r2 #L1 and DDR2 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3060 inherit + chip northbridge/amd/amdfam10 + device pci 18.0 on # northbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "1" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f71863fg + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8718f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end +# device pci 00.5 on end + end + end #domain + #for node 32 to node 63 + +end diff --git a/src/mainboard/jetway/pa78vm5_fam10/dsdt.asl b/src/mainboard/jetway/pa78vm5_fam10/dsdt.asl new file mode 100644 index 0000000..2252b16 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/dsdt.asl @@ -0,0 +1,1850 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "JETWAY", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + CPU0, /* name space name */ + 0, /* Unique number for this processor */ + 0x808, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU1, /* name space name */ + 1, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU2, /* name space name */ + 2, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + + Processor( + CPU3, /* name space name */ + 3, /* Unique number for this processor */ + 0x0000, /* PBLK system I/O address !hardcoded! */ + 0x00 /* PBLKLEN for boot processor */ + ) { + #include "acpi/cpstate.asl" + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE8718 Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the 8718 MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* 8718 magic number */ + } + /* Exit the 8718 MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + /* + * Keyboard PME is routed to SB700 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("8718F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/jetway/pa78vm5_fam10/get_bus_conf.c b/src/mainboard/jetway/pa78vm5_fam10/get_bus_conf.c new file mode 100644 index 0000000..47342fb --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs780[11]; +u8 bus_sb700[2]; +u32 apicid_sb700; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs780; +u32 sbdn_sb700; + +extern void get_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs780 = sysconf.sbdn; + sbdn_sb700 = 0; + + for (i = 0; i < 2; i++) { + bus_sb700[i] = 0; + } + for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) { + bus_rs780[i] = 0; + } + + bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb700[0] = bus_rs780[0]; + + /* sb700 */ + dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + if (dev) { + bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs780 */ + for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) { + dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0)); + if (dev) { + bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb700 = apicid_base + 0; +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/irq_tables.c b/src/mainboard/jetway/pa78vm5_fam10/irq_tables.c new file mode 100644 index 0000000..87c414a --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/irq_tables.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs780[8]; +extern u8 bus_sb700[2]; +extern unsigned long sbdn_sb700; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb700[0]; + pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/mainboard.c b/src/mainboard/jetway/pa78vm5_fam10/mainboard.c new file mode 100644 index 0000000..373ebb5 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/mainboard.c @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" + +void set_pcie_dereset(void); +void set_pcie_reset(void); +u8 is_dev3_present(void); + +/* + * the board uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to + * pull it up before training the slot. + ***/ +void set_pcie_dereset() +{ + u16 word; + device_t sm_dev; + /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + word = pci_read_config16(sm_dev, 0xA8); + word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */ + word &= ~((1 << 8) | (1 << 10)); + pci_write_config16(sm_dev, 0xA8, word); +} + +void set_pcie_reset() +{ + u16 word; + device_t sm_dev; + /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + word = pci_read_config16(sm_dev, 0xA8); + word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */ + word &= ~((1 << 8) | (1 << 10)); + pci_write_config16(sm_dev, 0xA8, word); +} + +#if 0 /* not tested yet. */ +/******************************************************** +* board uses SB700 GPIO9 to detect IDE_DMA66. +* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to +* get the cable type, 40 pin or 80 pin? +********************************************************/ +static void get_ide_dma66(void) +{ + u8 byte; + /*u32 sm_dev, ide_dev; */ + device_t sm_dev, ide_dev; + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + byte = pci_read_config8(sm_dev, 0xA9); + byte |= (1 << 5); /* Set Gpio9 as input */ + pci_write_config8(sm_dev, 0xA9, byte); + + ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); + byte = pci_read_config8(ide_dev, 0x56); + byte &= ~(7 << 0); + if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) + byte |= 2 << 0; /* mode 2 */ + else + byte |= 5 << 0; /* mode 5 */ + pci_write_config8(ide_dev, 0x56, byte); +} +#endif /* get_ide_dma66() */ + +u8 is_dev3_present(void) +{ + return 0; +} + +/************************************************* +* enable the dedicated function in this board. +* This function called early than rs780_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard PA78VM5 Enable. dev=0x%p\n", dev); + + set_pcie_dereset(); + /* get_ide_dma66(); */ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/jetway/pa78vm5_fam10/mptable.c b/src/mainboard/jetway/pa78vm5_fam10/mptable.c new file mode 100644 index 0000000..7cabdf1 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/mptable.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> + +extern u8 bus_rs780[11]; +extern u8 bus_sb700[2]; + +extern u32 apicid_sb700; + +extern u32 sbdn_rs780; +extern u32 sbdn_sb700; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb700[0], + PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb700, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb700, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/resourcemap.c b/src/mainboard/jetway/pa78vm5_fam10/resourcemap.c new file mode 100644 index 0000000..78d00f8 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/resourcemap.c @@ -0,0 +1,281 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/jetway/pa78vm5_fam10/romstage.c b/src/mainboard/jetway/pa78vm5_fam10/romstage.c new file mode 100644 index 0000000..5121605 --- /dev/null +++ b/src/mainboard/jetway/pa78vm5_fam10/romstage.c @@ -0,0 +1,259 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Wang Qing Pei wangqingpei@gmail.com + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +//#define SYSTEM_TYPE 0 /* SERVER */ +#define SYSTEM_TYPE 1 /* DESKTOP */ +//#define SYSTEM_TYPE 2 /* MOBILE */ + +//used by incoherent_ht +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 0 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include <lib.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <console/loglevel.h> +#include "cpu/x86/bist.h" +#include <superio/fintek/common/fintek.h> +#include <superio/fintek/f71863fg/f71863fg.h> +#include <cpu/amd/mtrr.h> +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/amd/rs780/early_setup.c" +#include "southbridge/amd/sb700/sb700.h" +#include "southbridge/amd/sb700/smbus.h" +#include "northbridge/amd/amdfam10/debug.c" + +#if CONFIG_TTYS0_BASE == 0x2f8 +#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP2) +#else +#define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1) +#endif + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static int spd_read_byte(u32 device, u32 address) +{ + return do_smbus_read_byte(SMBUS_IO_BASE, device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" +#include <spd.h> + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; + u32 bsp_apicid = 0, val; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sb7xx_51xx_pci_port80(); + } + + post_code(0x30); + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */ + /* All cores run this but the BSP(node0,core0) is the only core that returns. */ + } + + post_code(0x32); + + enable_rs780_dev8(); + sb7xx_51xx_lpc_init(); + + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // Load MPB + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + It would be nice to fixup prink spinlocks for ROM XIP mode. + I think it could be done by putting the spinlock flag in the cache + of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + + #if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); + #endif + + post_code(0x38); + + /* run _early_setup before soft-reset. */ + rs780_early_setup(); + sb7xx_51xx_early_setup(); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + rs780_htinit(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x40); + +// die("Die Before MCT init."); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + +/* + dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200); + dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200); +*/ + +// die("After MCT init before CAR disabled."); + + rs780_before_pci_init(); + sb7xx_51xx_before_pci_init(); + + post_code(0x42); + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/kontron/986lcd-m/Kconfig b/src/mainboard/kontron/986lcd-m/Kconfig deleted file mode 100644 index 2a3cfe2..0000000 --- a/src/mainboard/kontron/986lcd-m/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -if BOARD_KONTRON_986LCD_M - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MFCPGA478 - select NORTHBRIDGE_INTEL_I945 - select NORTHBRIDGE_INTEL_SUBTYPE_I945GM - select CHECK_SLFRCS_ON_RESUME - select SOUTHBRIDGE_INTEL_I82801GX - select SUPERIO_WINBOND_W83627THG - select HAVE_ACPI_TABLES - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_OPTION_TABLE - select HAVE_ACPI_RESUME - select BOARD_ROMSIZE_KB_1024 - select CHANNEL_XOR_RANDOMIZATION - select INTEL_INT15 - select OVERRIDE_CLOCK_DISABLE - -config MAINBOARD_DIR - string - default kontron/986lcd-m - -config MAINBOARD_PART_NUMBER - string - default "986LCD-M" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 4 - -config VGA_BIOS_FILE - string - default "amipci_01.20" - -endif # BOARD_KONTRON_986LCD_M diff --git a/src/mainboard/kontron/986lcd-m/acpi/ec.asl b/src/mainboard/kontron/986lcd-m/acpi/ec.asl deleted file mode 100644 index e6c30a0..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/ec.asl +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Device(EC0) -{ - Name (_HID, EISAID("PNP0C09")) - Name (_UID, 1) - - Method (_CRS, 0) - { - Name (ECMD, ResourceTemplate() - { - IO (Decode16, 0x62, 0x62, 0, 1) - IO (Decode16, 0x66, 0x66, 0, 1) - }) - - Return (ECMD) - } - - Method (_REG, 2) - { - // This method is needed by Windows XP/2000 - // for EC initialization before a driver - // is loaded - } - - Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI - - // TODO EC Query methods - - // TODO Scope _SB devices for AC power, LID, Power button - -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/i945_pci_irqs.asl b/src/mainboard/kontron/986lcd-m/acpi/i945_pci_irqs.asl deleted file mode 100644 index cd1fed5..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/i945_pci_irqs.asl +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * i945 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, 0, 16 }, - Package() { 0x0001ffff, 1, 0, 17 }, - Package() { 0x0001ffff, 2, 0, 18 }, - Package() { 0x0001ffff, 3, 0, 19 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - Package() { 0x001cffff, 1, 0, 17 }, - Package() { 0x001cffff, 2, 0, 18 }, - Package() { 0x001cffff, 3, 0, 19 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, 0, 23 }, - Package() { 0x001dffff, 1, 0, 19 }, - Package() { 0x001dffff, 2, 0, 18 }, - Package() { 0x001dffff, 3, 0, 16 }, - // AC97/IDE 0:1e.2, 0:1e.3 - Package() { 0x001effff, 0, 0, 17 }, - Package() { 0x001effff, 1, 0, 20 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, 0, 18 }, - Package() { 0x001fffff, 1, 0, 19}, - }) - } Else { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, - // AC97/IDE 0:1e.2, 0:1e.3 - Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - }) - } -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/ich7_pci_irqs.asl b/src/mainboard/kontron/986lcd-m/acpi/ich7_pci_irqs.asl deleted file mode 100644 index d702c99..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/ich7_pci_irqs.asl +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH7 - */ - -If (PICM) { - Return (Package() { - Package() { 0x0000ffff, 0, 0, 16}, - - Package() { 0x0001ffff, 0, 0, 20}, - Package() { 0x0001ffff, 1, 0, 21}, - Package() { 0x0001ffff, 2, 0, 22}, - Package() { 0x0001ffff, 3, 0, 23}, - - Package() { 0x0002ffff, 0, 0, 21}, - Package() { 0x0002ffff, 1, 0, 22}, - Package() { 0x0002ffff, 2, 0, 23}, - Package() { 0x0002ffff, 3, 0, 20}, - - Package() { 0x0003ffff, 0, 0, 22}, - Package() { 0x0003ffff, 1, 0, 23}, - Package() { 0x0003ffff, 2, 0, 20}, - Package() { 0x0003ffff, 3, 0, 21}, - - Package() { 0x0004ffff, 0, 0, 23}, - Package() { 0x0004ffff, 1, 0, 20}, - Package() { 0x0004ffff, 2, 0, 21}, - Package() { 0x0004ffff, 3, 0, 22}, - - Package() { 0x0005ffff, 0, 0, 19}, - Package() { 0x0005ffff, 1, 0, 18}, - Package() { 0x0005ffff, 2, 0, 17}, - Package() { 0x0005ffff, 3, 0, 16}, - - Package() { 0x0006ffff, 0, 0, 18}, - Package() { 0x0006ffff, 1, 0, 17}, - Package() { 0x0006ffff, 2, 0, 16}, - Package() { 0x0006ffff, 3, 0, 19}, - - Package() { 0x0009ffff, 0, 0, 21}, - Package() { 0x0009ffff, 1, 0, 22}, - Package() { 0x0009ffff, 2, 0, 23}, - Package() { 0x0009ffff, 3, 0, 20}, - }) -} Else { - Return (Package() { - Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, - - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKH, 0}, - - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, - - Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKF, 0}, - - Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKE, 0}, - Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKG, 0}, - - Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKD, 0}, - Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, - - Package() { 0x0006ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0006ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0006ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0006ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, - - Package() { 0x0009ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, - Package() { 0x0009ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, - Package() { 0x0009ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, - Package() { 0x0009ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, - }) -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/platform.asl b/src/mainboard/kontron/986lcd-m/acpi/platform.asl deleted file mode 100644 index 6770348..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/platform.asl +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // Call a trap so SMI can prepare for Sleep as well. - // TRAP(0x55) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - Return(Package(){0,0}) -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/superio.asl b/src/mainboard/kontron/986lcd-m/acpi/superio.asl deleted file mode 100644 index 4d11fdb..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/superio.asl +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -Device (SIO1) -{ - Name (_HID, EISAID("PNP0A05")) - Name (_UID, 1) - - Device (UAR1) - { - Name(_HID, EISAID("PNP0501")) - Name(_UID, 1) - Name(_DDN, "COM1") - - Method (_STA, 0) - { - // always enable for now - Return (0x0f) - } - - Method (_DIS, 0) { /* NOOP */ } - - Name (_PRS, ResourceTemplate() { - StartDependentFn(0, 1) { - IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) - IRQNoFlags() { 4 } - } EndDependentFn() - }) - - Method (_CRS, 0) - { - Return(ResourceTemplate() { - IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) - IRQNoFlags() { 4 } - }) - } - // Some methods need an implementation here: - // missing: _STA, _DIS, _CRS, _PRS, - // missing: _SRS, _PS0, _PS3 - } - - Device (UAR2) - { - Name(_HID, EISAID("PNP0501")) - Name(_UID, 2) - Name(_DDN, "COM2") - - Method (_STA, 0) - { - // always enable for now - Return (0x0f) - } - - Method (_DIS, 0) { /* NOOP */ } - - Name (_PRS, ResourceTemplate() { - StartDependentFn(0, 1) { - IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) - IRQNoFlags() { 3 } - } EndDependentFn() - }) - - Method (_CRS, 0) - { - Return(ResourceTemplate() { - IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) - IRQNoFlags() { 3 } - }) - } - // Some methods need an implementation here: - // missing: _STA, _DIS, _CRS, _PRS, - // missing: _SRS, _PS0, _PS3 - } -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/thermal.asl b/src/mainboard/kontron/986lcd-m/acpi/thermal.asl deleted file mode 100644 index 128d677..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/thermal.asl +++ /dev/null @@ -1,93 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - - // FIXME these could/should be read from the - // GNVS area, so they can be controlled by - // coreboot - Name(TC1V, 0x04) - Name(TC2V, 0x03) - Name(TSPV, 0x64) - - // At which temperature should the OS start - // active cooling? - Method (_AC0, 0, Serialized) - { - Return (0xf5c) // Value for Rocky - } - - // Method (_AC1, 0, Serialized) - // { - // Return (0xf5c) - // } - - // Critical shutdown temperature - Method (_CRT, 0, Serialized) - { - Return (Add (0x0aac, 0x50)) // FIXME - } - - // CPU throttling start temperature - Method (_PSV, 0, Serialized) - { - Return (0xaaf) // FIXME - } - - // Get DTS Temperature - Method (_TMP, 0, Serialized) - { - Return (0xaac) // FIXME - } - - // Processors used for active cooling - Method (_PSL, 0, Serialized) - { - If (MPEN) { - Return (Package() {_PR.CPU1, _PR.CPU2}) - } - Return (Package() {_PR.CPU1}) - } - - // TC1 value for passive cooling - Method (_TC1, 0, Serialized) - { - Return (TC1V) - } - - // TC2 value for passive cooling - Method (_TC2, 0, Serialized) - { - Return (TC2V) - } - - // Sampling period for passive cooling - Method (_TSP, 0, Serialized) - { - Return (TSPV) - } - - - } -} diff --git a/src/mainboard/kontron/986lcd-m/acpi/video.asl b/src/mainboard/kontron/986lcd-m/acpi/video.asl deleted file mode 100644 index cca1a3b..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi/video.asl +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Brightness write -Method (BRTW, 1, Serialized) -{ - // TODO -} - -// Hot Key Display Switch -Method (HKDS, 1, Serialized) -{ - // TODO -} - -// Lid Switch Display Switch -Method (LSDS, 1, Serialized) -{ - // TODO -} - -// Brightness Notification -Method(BRTN,1,Serialized) -{ - // TODO (no displays defined yet) -} diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c deleted file mode 100644 index 0560f8a..0000000 --- a/src/mainboard/kontron/986lcd-m/acpi_tables.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> - -#include "southbridge/intel/i82801gx/nvs.h" -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - - /* Enable both COM ports */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/kontron/986lcd-m/board_info.txt b/src/mainboard/kontron/986lcd-m/board_info.txt deleted file mode 100644 index 769c6a2..0000000 --- a/src/mainboard/kontron/986lcd-m/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Board name: 986LCD-M/mITX -Category: mini -Board URL: http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/m... -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/kontron/986lcd-m/cmos.layout b/src/mainboard/kontron/986lcd-m/cmos.layout deleted file mode 100644 index 5756bd7..0000000 --- a/src/mainboard/kontron/986lcd-m/cmos.layout +++ /dev/null @@ -1,197 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default -936 1 e 11 cmos_defaults_loaded -#937 11 r 0 unused - -# coreboot config options: mainboard specific options -948 2 e 8 cpufan_cruise_control -950 2 e 8 sysfan_cruise_control -952 4 e 9 cpufan_speed -#956 4 e 10 cpufan_temperature -960 4 e 9 sysfan_speed -#964 4 e 10 sysfan_temperature - -968 1 e 2 ethernet1 -969 1 e 2 ethernet2 -970 1 e 2 ethernet3 -971 1 e 1 lpt - -#972 12 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ram initialization internal data -1024 8 r 0 C0WL0REOST -1032 8 r 0 C1WL0REOST -1040 8 r 0 RCVENMT -1048 4 r 0 C0DRT1 -1052 4 r 0 C1DRT1 - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -# Fan Cruise Control -8 0 Disabled -8 1 Speed -#8 2 Thermal -# Fan Speed (Rotations per Minute) -9 0 5625 -9 1 5192 -9 2 4753 -9 3 4326 -9 4 3924 -9 5 3552 -9 6 3214 -9 7 2909 -9 8 2636 -9 9 2393 -9 10 2177 -9 11 1985 -9 12 1814 -9 13 1662 -9 14 1527 -9 15 1406 -# -# Temperature (°C/°F) -#10 0 30/86 -#10 1 33/91 -#10 2 36/96 -#10 3 39/102 -#10 4 42/107 -#10 5 45/113 -#10 6 48/118 -#10 7 51/123 -#10 8 54/129 -#10 9 57/134 -#10 10 60/140 -#10 11 63/145 -#10 12 66/150 -#10 13 69/156 -#10 14 72/161 -#10 15 75/167 -11 0 No -11 1 Yes -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb deleted file mode 100644 index 65a96a0..0000000 --- a/src/mainboard/kontron/986lcd-m/devicetree.cb +++ /dev/null @@ -1,130 +0,0 @@ -chip northbridge/intel/i945 - - device cpu_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 01.0 off end # i945 PCIe root port - device pci 02.0 on end # vga controller - device pci 02.1 on end # display controller - - chip southbridge/intel/i82801gx - register "pirqa_routing" = "0x05" - register "pirqb_routing" = "0x07" - register "pirqc_routing" = "0x05" - register "pirqd_routing" = "0x07" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x06" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi13_routing" = "1" - - register "ide_legacy_combined" = "0x1" - register "ide_enable_primary" = "0x1" - register "ide_enable_secondary" = "0x1" - register "sata_ahci" = "0x0" - - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe - device pci 1c.1 on end # PCIe - device pci 1c.2 on end # PCIe - #device pci 1c.3 off end # PCIe port 4 - #device pci 1c.4 off end # PCIe port 5 - #device pci 1c.5 off end # PCIe port 6 - device pci 1d.0 on end # USB UHCI - device pci 1d.1 on end # USB UHCI - device pci 1d.2 on end # USB UHCI - device pci 1d.3 on end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on end # PCI bridge - #device pci 1e.2 off end # AC'97 Audio - #device pci 1e.3 off end # AC'97 Modem - device pci 1f.0 on # LPC bridge - chip superio/winbond/w83627thg - device pnp 2e.0 off # Floppy - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 5 - end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq - end - device pnp 2e.5 on # Keyboard+Mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - irq 0xf0 = 0x82 # HW accel A20. - end - device pnp 2e.7 on # GPIO1, GAME, MIDI - io 0x62 = 0x330 - irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 - # all default - end - device pnp 2e.9 on # GPIO3/4 - irq 0x30 = 0x03 # does this work? - irq 0xf0 = 0xfb # set inputs/outputs - irq 0xf1 = 0x66 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0xa00 - irq 0x70 = 0 - end - - end - chip superio/winbond/w83627thg - device pnp 4e.0 off # Floppy - end - device pnp 4e.1 off # Parport - end - device pnp 4e.2 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 11 - end - device pnp 4e.3 on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 10 - irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq - end - device pnp 4e.5 off # Keyboard - end - device pnp 4e.7 off # GPIO1, GAME, MIDI - end - device pnp 4e.8 off # GPIO2 - end - device pnp 4e.9 off # GPIO3/4 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b off # HWM - end - end - - end - #device pci 1f.1 off end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus - #device pci 1f.4 off end # Realtek ID Codec - end - end -end diff --git a/src/mainboard/kontron/986lcd-m/dsdt.asl b/src/mainboard/kontron/986lcd-m/dsdt.asl deleted file mode 100644 index 4e455cc..0000000 --- a/src/mainboard/kontron/986lcd-m/dsdt.asl +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - //#include "acpi/thermal.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/i945/acpi/i945.asl> - #include <southbridge/intel/i82801gx/acpi/ich7.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> -} diff --git a/src/mainboard/kontron/986lcd-m/fadt.c b/src/mainboard/kontron/986lcd-m/fadt.c deleted file mode 100644 index 92bf647..0000000 --- a/src/mainboard/kontron/986lcd-m/fadt.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void mainboard_fill_fadt(acpi_fadt_t * fadt) -{ - fadt->p_lvl3_lat = 85; - fadt->duty_width = 0; - fadt->iapc_boot_arch = 0x03; - - fadt->flags |= ACPI_FADT_C2_MP_SUPPORTED - | ACPI_FADT_RESET_REGISTER |ACPI_FADT_PLATFORM_CLOCK; -} diff --git a/src/mainboard/kontron/986lcd-m/hda_verb.c b/src/mainboard/kontron/986lcd-m/hda_verb.c deleted file mode 100644 index 072a306..0000000 --- a/src/mainboard/kontron/986lcd-m/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/kontron/986lcd-m/irq_tables.c b/src/mainboard/kontron/986lcd-m/irq_tables.c deleted file mode 100644 index a585122..0000000 --- a/src/mainboard/kontron/986lcd-m/irq_tables.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x27b0, /* Device */ - 0, /* miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf, /* u8 checksum. */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe? - {0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA - {0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge - {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC - {0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1 - {0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device - {0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge - {0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire - {0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge - {0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0}, - {0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0}, - {0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0}, - {0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, - {0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0}, - {0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0}, - {0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168 - {0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0}, - {0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c deleted file mode 100644 index afca796..0000000 --- a/src/mainboard/kontron/986lcd-m/mainboard.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <device/device.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/io.h> -#include <arch/interrupt.h> - -/* Hardware Monitor */ - -static u16 hwm_base = 0xa00; - -static void hwm_write(u8 reg, u8 value) -{ - outb(reg, hwm_base + 0x05); - outb(value, hwm_base + 0x06); -} - -static void hwm_bank(u8 bank) -{ - hwm_write(0x4e, bank); -} - -#define FAN_CRUISE_CONTROL_DISABLED 0 -#define FAN_CRUISE_CONTROL_SPEED 1 -#define FAN_CRUISE_CONTROL_THERMAL 2 - -#define FAN_SPEED_5625 0 -//#define FAN_TEMPERATURE_30DEGC 0 - -struct fan_speed { - u8 fan_in; - u16 fan_speed; -}; - -// FANIN Target Speed Register -// FANIN = 337500 / RPM -struct fan_speed fan_speeds[] = { - { 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 }, - { 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 }, - { 0x80, 2636 }, { 0x8d, 2393 }, { 0x9b, 2177 }, { 0xaa, 1985 }, - { 0xba, 1814 }, { 0xcb, 1662 }, { 0xdd, 1527 }, { 0xf0, 1406 } -}; - -struct temperature { - u8 deg_celsius; - u8 deg_fahrenheit; -}; - -struct temperature temperatures[] = { - { 30, 86 }, { 33, 91 }, { 36, 96 }, { 39, 102 }, - { 42, 107 }, { 45, 113 }, { 48, 118 }, { 51, 123 }, - { 54, 129 }, { 57, 134 }, { 60, 140 }, { 63, 145 }, - { 66, 150 }, { 69, 156 }, { 72, 161 }, { 75, 167 } -}; - -static void hwm_setup(void) -{ - int cpufan_control = 0, sysfan_control = 0; - int cpufan_speed = 0, sysfan_speed = 0; - int cpufan_temperature = 0, sysfan_temperature = 0; - - if (get_option(&cpufan_control, "cpufan_cruise_control") != CB_SUCCESS) - cpufan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&cpufan_speed, "cpufan_speed") != CB_SUCCESS) - cpufan_speed = FAN_SPEED_5625; - //if (get_option(&cpufan_temperature, "cpufan_temperature") != CB_SUCCESS) - // cpufan_temperature = FAN_TEMPERATURE_30DEGC; - - if (get_option(&sysfan_control, "sysfan_cruise_control") != CB_SUCCESS) - sysfan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&sysfan_speed, "sysfan_speed") != CB_SUCCESS) - sysfan_speed = FAN_SPEED_5625; - //if (get_option(&sysfan_temperature, "sysfan_temperature") != CB_SUCCESS) - // sysfan_temperature = FAN_TEMPERATURE_30DEGC; - - // hwm_write(0x31, 0x20); // AVCC high limit - // hwm_write(0x34, 0x06); // VIN2 low limit - - hwm_bank(0); - hwm_write(0x59, 0x20); // Diode Selection - hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor - - hwm_bank(4); - hwm_write(0x54, 0xf1); // SYSTIN temperature offset - hwm_write(0x55, 0x19); // CPUTIN temperature offset - hwm_write(0x56, 0xfc); // AUXTIN temperature offset - - hwm_bank(0x80); // Default - - u8 fan_config = 0; - // 00 FANOUT is Manual Mode - // 01 FANOUT is Thermal Cruise Mode - // 10 FANOUT is Fan Speed Cruise Mode - switch (cpufan_control) { - case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 4); break; - case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break; - } - switch (sysfan_control) { - case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 2); break; - case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break; - } - // This register must be written first - hwm_write(0x04, fan_config); - - switch (cpufan_control) { - case FAN_CRUISE_CONTROL_SPEED: - printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n", - fan_speeds[cpufan_speed].fan_speed); - hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed - break; - case FAN_CRUISE_CONTROL_THERMAL: - printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n", - temperatures[cpufan_temperature].deg_celsius, - temperatures[cpufan_temperature].deg_fahrenheit); - hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature - break; - } - - switch (sysfan_control) { - case FAN_CRUISE_CONTROL_SPEED: - printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n", - fan_speeds[sysfan_speed].fan_speed); - hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed - break; - case FAN_CRUISE_CONTROL_THERMAL: - printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n", - temperatures[sysfan_temperature].deg_celsius, - temperatures[sysfan_temperature].deg_fahrenheit); - hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature - break; - } - - hwm_write(0x0e, 0x02); // Fan Output Step Down Time - hwm_write(0x0f, 0x02); // Fan Output Step Up Time - - hwm_write(0x47, 0xaf); // FAN divisor register - hwm_write(0x4b, 0x84); // AUXFANIN speed divisor - - hwm_write(0x40, 0x01); // Init, but no SMI# -} - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 3); - hwm_setup(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c deleted file mode 100644 index 03f7370..0000000 --- a/src/mainboard/kontron/986lcd-m/mptable.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct device *riser = NULL, *firewire = NULL; - int firewire_bus = 0, riser_bus = 0, isa_bus; - int ioapic_id; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - firewire = dev_find_device(0x104c, 0x8023, 0); - if (firewire) { - firewire_bus = firewire->bus->secondary; - } - - // If a riser card is used, this riser is detected on bus 4, so its secondary bus is the - // highest bus number on the pci bus. - riser = dev_find_device(0x3388, 0x0021, 0); - if (!riser) - riser = dev_find_device(0x3388, 0x0022, 0); - if (riser) { - riser_bus = riser->link_list->secondary; - } - - mptable_write_buses(mc, NULL, &isa_bus); - - /* I/O APICs: APIC ID Version State Address */ - ioapic_id = 2; - smp_write_ioapic(mc, ioapic_id, 0x20, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); - - /* Builtin devices on Bus 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x4, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, ioapic_id, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, ioapic_id, 0x17); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, ioapic_id, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, ioapic_id, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, ioapic_id, 0x11); - - /* Internal PCI bus (Firewire, PCI slot) */ - if (firewire) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, firewire_bus, 0x0, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, firewire_bus, 0x4, ioapic_id, 0x14); - } - - if (riser) { - /* Old riser card */ - // riser slot top 5:8.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x20, ioapic_id, 0x14); - // riser slot middle 5:9.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x24, ioapic_id, 0x15); - // riser slot bottom 5:a.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x28, ioapic_id, 0x16); - - /* New Riser Card */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x30, ioapic_id, 0x14); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x34, ioapic_id, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x38, ioapic_id, 0x16); - } - - /* PCIe slot */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, ioapic_id, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x1, ioapic_id, 0x11); - - /* Onboard Ethernet */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x0, ioapic_id, 0x10); - - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 1); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/kontron/986lcd-m/romstage.c b/src/mainboard/kontron/986lcd-m/romstage.c deleted file mode 100644 index 2c12c5d..0000000 --- a/src/mainboard/kontron/986lcd-m/romstage.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// __PRE_RAM__ means: use "unsigned" for device, not a struct. - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include "option_table.h" -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include "northbridge/intel/i945/i945.h" -#include "northbridge/intel/i945/raminit.h" -#include "southbridge/intel/i82801gx/i82801gx.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) - -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - /* General Registers */ - outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xebffeeff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - -static void ich7_enable_lpc(void) -{ - int lpt_en = 0; - if (read_option(lpt, 0) != 0) { - lpt_en = 1<<2; // enable LPT - } - // Enable Serial IRQ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); - // Set COM1/COM2 decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); - // Enable COM1/COM2/KBD/SuperIO1+2 - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b | lpt_en); - // Enable HWM at 0xa00 - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01); - // COM3 decode - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9); - // COM4 decode - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x000402e9); - // io 0x300 decode - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000301); -} - -/* TODO: superio code should really not be in mainboard */ -static void pnp_enter_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/* This box has two superios, so enabling serial becomes slightly excessive. - * We disable a lot of stuff to make sure that there are no conflicts between - * the two. Also set up the GPIOs from the beginning. This is the "no schematic - * but safe anyways" method. - */ -static void early_superio_config_w83627thg(void) -{ - device_t dev; - - dev=PNP_DEV(0x2e, W83627THG_SP1); - pnp_enter_func_mode(dev); - - pnp_write_config(dev, 0x24, 0xc6); // PNPCSV - - pnp_write_config(dev, 0x29, 0x43); // GPIO settings - pnp_write_config(dev, 0x2a, 0x40); // GPIO settings - - dev=PNP_DEV(0x2e, W83627THG_SP1); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 4); - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x2e, W83627THG_SP2); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x2f8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 3); - // pnp_write_config(dev, 0xf1, 4); // IRMODE0 - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x2e, W83627THG_KBC); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x60); - pnp_set_iobase(dev, PNP_IDX_IO1, 0x64); - // pnp_write_config(dev, 0xf0, 0x82); - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x2e, W83627THG_GAME_MIDI_GPIO1); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_write_config(dev, 0xf5, 0xff); // invert all GPIOs - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x2e, W83627THG_GPIO2); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 1); // Just enable it - - dev=PNP_DEV(0x2e, W83627THG_GPIO3); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_write_config(dev, 0xf0, 0xfb); // GPIO bit 2 is output - pnp_write_config(dev, 0xf1, 0x00); // GPIO bit 2 is 0 - pnp_write_config(dev, 0x30, 0x03); // Enable GPIO3+4. pnp_set_enable is not sufficient - - dev=PNP_DEV(0x2e, W83627THG_FDC); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - - dev=PNP_DEV(0x2e, W83627THG_PP); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - - /* Enable HWM */ - dev=PNP_DEV(0x2e, W83627THG_HWM); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0xa00); - pnp_set_enable(dev, 1); - - pnp_exit_func_mode(dev); - - dev=PNP_DEV(0x4e, W83627THG_SP1); - pnp_enter_func_mode(dev); - - pnp_set_logical_device(dev); // Set COM3 to sane non-conflicting values - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 11); - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x4e, W83627THG_SP2); - pnp_set_logical_device(dev); // Set COM4 to sane non-conflicting values - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x2e8); - pnp_set_irq(dev, PNP_IDX_IRQ0, 10); - pnp_set_enable(dev, 1); - - dev=PNP_DEV(0x4e, W83627THG_FDC); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - - dev=PNP_DEV(0x4e, W83627THG_PP); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - - dev=PNP_DEV(0x4e, W83627THG_KBC); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x00); - pnp_set_iobase(dev, PNP_IDX_IO1, 0x00); - - pnp_exit_func_mode(dev); -} - -static void rcba_config(void) -{ - u32 reg32; - - /* Set up virtual channel 0 */ - //RCBA32(0x0014) = 0x80000001; - //RCBA32(0x001c) = 0x03128010; - - /* Device 1f interrupt pin register */ - RCBA32(0x3100) = 0x00042210; - /* Device 1d interrupt pin register */ - RCBA32(0x310c) = 0x00214321; - - /* dev irq route register */ - RCBA16(0x3140) = 0x0132; - RCBA16(0x3142) = 0x3241; - RCBA16(0x3144) = 0x0237; - RCBA16(0x3146) = 0x3210; - RCBA16(0x3148) = 0x3210; - - /* Enable IOAPIC */ - RCBA8(0x31ff) = 0x03; - - /* Enable upper 128bytes of CMOS */ - RCBA32(0x3400) = (1 << 2); - - /* Now, this is a bit ugly. As per PCI specification, function 0 of a - * device always has to be implemented. So disabling ethernet port 1 - * would essentially disable all three ethernet ports of the mainboard. - * It's possible to rename the ports to achieve compatibility to the - * PCI spec but this will confuse all (static!) tables containing - * interrupt routing information. - * To avoid this, we enable (unused) port 6 and swap it with port 1 - * in the case that ethernet port 1 is disabled. Since no devices - * are connected to that port, we don't have to worry about interrupt - * routing. - */ - int port_shuffle = 0; - - /* Disable unused devices */ - reg32 = FD_ACMOD|FD_ACAUD|FD_PATA; - reg32 |= FD_PCIE6|FD_PCIE5|FD_PCIE4; - - if (read_option(ethernet1, 0) != 0) { - printk(BIOS_DEBUG, "Disabling ethernet adapter 1.\n"); - reg32 |= FD_PCIE1; - } - if (read_option(ethernet2, 0) != 0) { - printk(BIOS_DEBUG, "Disabling ethernet adapter 2.\n"); - reg32 |= FD_PCIE2; - } else { - if (reg32 & FD_PCIE1) - port_shuffle = 1; - } - if (read_option(ethernet3, 0) != 0) { - printk(BIOS_DEBUG, "Disabling ethernet adapter 3.\n"); - reg32 |= FD_PCIE3; - } else { - if (reg32 & FD_PCIE1) - port_shuffle = 1; - } - - if (port_shuffle) { - /* Enable PCIE6 again */ - reg32 &= ~FD_PCIE6; - /* Swap PCIE6 and PCIE1 */ - RCBA32(RPFN) = 0x00043215; - } - - reg32 |= 1; - - RCBA32(0x3418) = reg32; - - /* Enable PCIe Root Port Clock Gate */ - // RCBA32(0x341c) = 0x00000001; -} - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - RCBA32(0x0088) = 0x0011d000; - RCBA16(0x01fc) = 0x060f; - RCBA32(0x01f4) = 0x86000040; - RCBA32(0x0214) = 0x10030549; - RCBA32(0x0218) = 0x00020504; - RCBA8(0x0220) = 0xc5; - reg32 = RCBA32(0x3410); - reg32 |= (1 << 6); - RCBA32(0x3410) = reg32; - reg32 = RCBA32(0x3430); - reg32 &= ~(3 << 0); - reg32 |= (1 << 0); - RCBA32(0x3430) = reg32; - RCBA32(0x3418) |= (1 << 0); - RCBA16(0x0200) = 0x2008; - RCBA8(0x2027) = 0x0d; - RCBA16(0x3e08) |= (1 << 7); - RCBA16(0x3e48) |= (1 << 7); - RCBA32(0x3e0e) |= (1 << 7); - RCBA32(0x3e4e) |= (1 << 7); - - // next step only on ich7m b0 and later: - reg32 = RCBA32(0x2034); - reg32 &= ~(0x0f << 16); - reg32 |= (5 << 16); - RCBA32(0x2034) = reg32; -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; - - if (bist == 0) - enable_lapic(); - - /* Force PCIRST# */ - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); - udelay(200 * 1000); - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); - - ich7_enable_lpc(); - early_superio_config_w83627thg(); - - /* Set up the console */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); - outb(0x6, 0xcf9); - while (1) asm("hlt"); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - i945_early_initialization(); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } - - /* Enable SPD ROMs and DDR-II DRAM */ - enable_smbus(); - -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 - dump_spd_registers(); -#endif - - sdram_initialize(boot_mode, NULL); - - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - /* Chipset Errata! */ - fixup_i945_errata(); - - /* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - quick_ram_check(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif -} diff --git a/src/mainboard/kontron/986lcd-m/smihandler.c b/src/mainboard/kontron/986lcd-m/smihandler.c deleted file mode 100644 index 9c86697..0000000 --- a/src/mainboard/kontron/986lcd-m/smihandler.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/i82801gx/nvs.h" - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - gnvs->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} diff --git a/src/mainboard/kontron/986lcd_m/Kconfig b/src/mainboard/kontron/986lcd_m/Kconfig new file mode 100644 index 0000000..e618300 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/Kconfig @@ -0,0 +1,45 @@ +if BOARD_KONTRON_986LCD_M + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_MFCPGA478 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GM + select CHECK_SLFRCS_ON_RESUME + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_WINBOND_W83627THG + select HAVE_ACPI_TABLES + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select BOARD_ROMSIZE_KB_1024 + select CHANNEL_XOR_RANDOMIZATION + select INTEL_INT15 + select OVERRIDE_CLOCK_DISABLE + +config MAINBOARD_DIR + string + default kontron/986lcd_m + +config MAINBOARD_PART_NUMBER + string + default "986LCD-M" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 4 + +config VGA_BIOS_FILE + string + default "amipci_01.20" + +endif # BOARD_KONTRON_986LCD_M diff --git a/src/mainboard/kontron/986lcd_m/acpi/ec.asl b/src/mainboard/kontron/986lcd_m/acpi/ec.asl new file mode 100644 index 0000000..e6c30a0 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/ec.asl @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Device(EC0) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 1) + + Method (_CRS, 0) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 0, 1) + IO (Decode16, 0x66, 0x66, 0, 1) + }) + + Return (ECMD) + } + + Method (_REG, 2) + { + // This method is needed by Windows XP/2000 + // for EC initialization before a driver + // is loaded + } + + Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI + + // TODO EC Query methods + + // TODO Scope _SB devices for AC power, LID, Power button + +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/i945_pci_irqs.asl b/src/mainboard/kontron/986lcd_m/acpi/i945_pci_irqs.asl new file mode 100644 index 0000000..cd1fed5 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/i945_pci_irqs.asl @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, 0, 16 }, + Package() { 0x0001ffff, 1, 0, 17 }, + Package() { 0x0001ffff, 2, 0, 18 }, + Package() { 0x0001ffff, 3, 0, 19 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + Package() { 0x001cffff, 1, 0, 17 }, + Package() { 0x001cffff, 2, 0, 18 }, + Package() { 0x001cffff, 3, 0, 19 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, 0, 23 }, + Package() { 0x001dffff, 1, 0, 19 }, + Package() { 0x001dffff, 2, 0, 18 }, + Package() { 0x001dffff, 3, 0, 16 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, 0, 17 }, + Package() { 0x001effff, 1, 0, 20 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, 0, 18 }, + Package() { 0x001fffff, 1, 0, 19}, + }) + } Else { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKA, 0 }, + // AC97/IDE 0:1e.2, 0:1e.3 + Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + }) + } +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/ich7_pci_irqs.asl b/src/mainboard/kontron/986lcd_m/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..d702c99 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/ich7_pci_irqs.asl @@ -0,0 +1,102 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package() { 0x0000ffff, 0, 0, 16}, + + Package() { 0x0001ffff, 0, 0, 20}, + Package() { 0x0001ffff, 1, 0, 21}, + Package() { 0x0001ffff, 2, 0, 22}, + Package() { 0x0001ffff, 3, 0, 23}, + + Package() { 0x0002ffff, 0, 0, 21}, + Package() { 0x0002ffff, 1, 0, 22}, + Package() { 0x0002ffff, 2, 0, 23}, + Package() { 0x0002ffff, 3, 0, 20}, + + Package() { 0x0003ffff, 0, 0, 22}, + Package() { 0x0003ffff, 1, 0, 23}, + Package() { 0x0003ffff, 2, 0, 20}, + Package() { 0x0003ffff, 3, 0, 21}, + + Package() { 0x0004ffff, 0, 0, 23}, + Package() { 0x0004ffff, 1, 0, 20}, + Package() { 0x0004ffff, 2, 0, 21}, + Package() { 0x0004ffff, 3, 0, 22}, + + Package() { 0x0005ffff, 0, 0, 19}, + Package() { 0x0005ffff, 1, 0, 18}, + Package() { 0x0005ffff, 2, 0, 17}, + Package() { 0x0005ffff, 3, 0, 16}, + + Package() { 0x0006ffff, 0, 0, 18}, + Package() { 0x0006ffff, 1, 0, 17}, + Package() { 0x0006ffff, 2, 0, 16}, + Package() { 0x0006ffff, 3, 0, 19}, + + Package() { 0x0009ffff, 0, 0, 21}, + Package() { 0x0009ffff, 1, 0, 22}, + Package() { 0x0009ffff, 2, 0, 23}, + Package() { 0x0009ffff, 3, 0, 20}, + }) +} Else { + Return (Package() { + Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKH, 0}, + + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, + + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKF, 0}, + + Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKE, 0}, + Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKG, 0}, + + Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, + + Package() { 0x0006ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0006ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0006ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0006ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, + + Package() { 0x0009ffff, 0, _SB.PCI0.LPCB.LNKF, 0}, + Package() { 0x0009ffff, 1, _SB.PCI0.LPCB.LNKG, 0}, + Package() { 0x0009ffff, 2, _SB.PCI0.LPCB.LNKH, 0}, + Package() { 0x0009ffff, 3, _SB.PCI0.LPCB.LNKE, 0}, + }) +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/platform.asl b/src/mainboard/kontron/986lcd_m/acpi/platform.asl new file mode 100644 index 0000000..6770348 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/platform.asl @@ -0,0 +1,90 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // Call a trap so SMI can prepare for Sleep as well. + // TRAP(0x55) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/superio.asl b/src/mainboard/kontron/986lcd_m/acpi/superio.asl new file mode 100644 index 0000000..4d11fdb --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/superio.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +Device (SIO1) +{ + Name (_HID, EISAID("PNP0A05")) + Name (_UID, 1) + + Device (UAR1) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 1) + Name(_DDN, "COM1") + + Method (_STA, 0) + { + // always enable for now + Return (0x0f) + } + + Method (_DIS, 0) { /* NOOP */ } + + Name (_PRS, ResourceTemplate() { + StartDependentFn(0, 1) { + IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) + IRQNoFlags() { 4 } + } EndDependentFn() + }) + + Method (_CRS, 0) + { + Return(ResourceTemplate() { + IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8) + IRQNoFlags() { 4 } + }) + } + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } + + Device (UAR2) + { + Name(_HID, EISAID("PNP0501")) + Name(_UID, 2) + Name(_DDN, "COM2") + + Method (_STA, 0) + { + // always enable for now + Return (0x0f) + } + + Method (_DIS, 0) { /* NOOP */ } + + Name (_PRS, ResourceTemplate() { + StartDependentFn(0, 1) { + IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) + IRQNoFlags() { 3 } + } EndDependentFn() + }) + + Method (_CRS, 0) + { + Return(ResourceTemplate() { + IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8) + IRQNoFlags() { 3 } + }) + } + // Some methods need an implementation here: + // missing: _STA, _DIS, _CRS, _PRS, + // missing: _SRS, _PS0, _PS3 + } +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/thermal.asl b/src/mainboard/kontron/986lcd_m/acpi/thermal.asl new file mode 100644 index 0000000..128d677 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/thermal.asl @@ -0,0 +1,93 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + + // FIXME these could/should be read from the + // GNVS area, so they can be controlled by + // coreboot + Name(TC1V, 0x04) + Name(TC2V, 0x03) + Name(TSPV, 0x64) + + // At which temperature should the OS start + // active cooling? + Method (_AC0, 0, Serialized) + { + Return (0xf5c) // Value for Rocky + } + + // Method (_AC1, 0, Serialized) + // { + // Return (0xf5c) + // } + + // Critical shutdown temperature + Method (_CRT, 0, Serialized) + { + Return (Add (0x0aac, 0x50)) // FIXME + } + + // CPU throttling start temperature + Method (_PSV, 0, Serialized) + { + Return (0xaaf) // FIXME + } + + // Get DTS Temperature + Method (_TMP, 0, Serialized) + { + Return (0xaac) // FIXME + } + + // Processors used for active cooling + Method (_PSL, 0, Serialized) + { + If (MPEN) { + Return (Package() {_PR.CPU1, _PR.CPU2}) + } + Return (Package() {_PR.CPU1}) + } + + // TC1 value for passive cooling + Method (_TC1, 0, Serialized) + { + Return (TC1V) + } + + // TC2 value for passive cooling + Method (_TC2, 0, Serialized) + { + Return (TC2V) + } + + // Sampling period for passive cooling + Method (_TSP, 0, Serialized) + { + Return (TSPV) + } + + + } +} diff --git a/src/mainboard/kontron/986lcd_m/acpi/video.asl b/src/mainboard/kontron/986lcd_m/acpi/video.asl new file mode 100644 index 0000000..cca1a3b --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi/video.asl @@ -0,0 +1,42 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Brightness write +Method (BRTW, 1, Serialized) +{ + // TODO +} + +// Hot Key Display Switch +Method (HKDS, 1, Serialized) +{ + // TODO +} + +// Lid Switch Display Switch +Method (LSDS, 1, Serialized) +{ + // TODO +} + +// Brightness Notification +Method(BRTN,1,Serialized) +{ + // TODO (no displays defined yet) +} diff --git a/src/mainboard/kontron/986lcd_m/acpi_tables.c b/src/mainboard/kontron/986lcd_m/acpi_tables.c new file mode 100644 index 0000000..0560f8a --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/acpi_tables.c @@ -0,0 +1,80 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> + +#include "southbridge/intel/i82801gx/nvs.h" +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/kontron/986lcd_m/board_info.txt b/src/mainboard/kontron/986lcd_m/board_info.txt new file mode 100644 index 0000000..769c6a2 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/board_info.txt @@ -0,0 +1,7 @@ +Board name: 986LCD-M/mITX +Category: mini +Board URL: http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/m... +ROM package: PLCC +ROM protocol: FWH +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/kontron/986lcd_m/cmos.layout b/src/mainboard/kontron/986lcd_m/cmos.layout new file mode 100644 index 0000000..5756bd7 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/cmos.layout @@ -0,0 +1,197 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default +936 1 e 11 cmos_defaults_loaded +#937 11 r 0 unused + +# coreboot config options: mainboard specific options +948 2 e 8 cpufan_cruise_control +950 2 e 8 sysfan_cruise_control +952 4 e 9 cpufan_speed +#956 4 e 10 cpufan_temperature +960 4 e 9 sysfan_speed +#964 4 e 10 sysfan_temperature + +968 1 e 2 ethernet1 +969 1 e 2 ethernet2 +970 1 e 2 ethernet3 +971 1 e 1 lpt + +#972 12 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ram initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +# Fan Cruise Control +8 0 Disabled +8 1 Speed +#8 2 Thermal +# Fan Speed (Rotations per Minute) +9 0 5625 +9 1 5192 +9 2 4753 +9 3 4326 +9 4 3924 +9 5 3552 +9 6 3214 +9 7 2909 +9 8 2636 +9 9 2393 +9 10 2177 +9 11 1985 +9 12 1814 +9 13 1662 +9 14 1527 +9 15 1406 +# +# Temperature (°C/°F) +#10 0 30/86 +#10 1 33/91 +#10 2 36/96 +#10 3 39/102 +#10 4 42/107 +#10 5 45/113 +#10 6 48/118 +#10 7 51/123 +#10 8 54/129 +#10 9 57/134 +#10 10 60/140 +#10 11 63/145 +#10 12 66/150 +#10 13 69/156 +#10 14 72/161 +#10 15 75/167 +11 0 No +11 1 Yes +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/kontron/986lcd_m/devicetree.cb b/src/mainboard/kontron/986lcd_m/devicetree.cb new file mode 100644 index 0000000..65a96a0 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/devicetree.cb @@ -0,0 +1,130 @@ +chip northbridge/intel/i945 + + device cpu_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 off end # i945 PCIe root port + device pci 02.0 on end # vga controller + device pci 02.1 on end # display controller + + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x05" + register "pirqb_routing" = "0x07" + register "pirqc_routing" = "0x05" + register "pirqd_routing" = "0x07" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x06" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "1" + + register "ide_legacy_combined" = "0x1" + register "ide_enable_primary" = "0x1" + register "ide_enable_secondary" = "0x1" + register "sata_ahci" = "0x0" + + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe + device pci 1c.1 on end # PCIe + device pci 1c.2 on end # PCIe + #device pci 1c.3 off end # PCIe port 4 + #device pci 1c.4 off end # PCIe port 5 + #device pci 1c.5 off end # PCIe port 6 + device pci 1d.0 on end # USB UHCI + device pci 1d.1 on end # USB UHCI + device pci 1d.2 on end # USB UHCI + device pci 1d.3 on end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on end # PCI bridge + #device pci 1e.2 off end # AC'97 Audio + #device pci 1e.3 off end # AC'97 Modem + device pci 1f.0 on # LPC bridge + chip superio/winbond/w83627thg + device pnp 2e.0 off # Floppy + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 5 + end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq + end + device pnp 2e.5 on # Keyboard+Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + irq 0xf0 = 0x82 # HW accel A20. + end + device pnp 2e.7 on # GPIO1, GAME, MIDI + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 2e.8 on # GPIO2 + # all default + end + device pnp 2e.9 on # GPIO3/4 + irq 0x30 = 0x03 # does this work? + irq 0xf0 = 0xfb # set inputs/outputs + irq 0xf1 = 0x66 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # HWM + io 0x60 = 0xa00 + irq 0x70 = 0 + end + + end + chip superio/winbond/w83627thg + device pnp 4e.0 off # Floppy + end + device pnp 4e.1 off # Parport + end + device pnp 4e.2 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 11 + end + device pnp 4e.3 on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 10 + irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq + end + device pnp 4e.5 off # Keyboard + end + device pnp 4e.7 off # GPIO1, GAME, MIDI + end + device pnp 4e.8 off # GPIO2 + end + device pnp 4e.9 off # GPIO3/4 + end + device pnp 4e.a off # ACPI + end + device pnp 4e.b off # HWM + end + end + + end + #device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on end # SMBus + #device pci 1f.4 off end # Realtek ID Codec + end + end +end diff --git a/src/mainboard/kontron/986lcd_m/dsdt.asl b/src/mainboard/kontron/986lcd_m/dsdt.asl new file mode 100644 index 0000000..4e455cc --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/dsdt.asl @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + //#include "acpi/thermal.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/kontron/986lcd_m/fadt.c b/src/mainboard/kontron/986lcd_m/fadt.c new file mode 100644 index 0000000..92bf647 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/fadt.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void mainboard_fill_fadt(acpi_fadt_t * fadt) +{ + fadt->p_lvl3_lat = 85; + fadt->duty_width = 0; + fadt->iapc_boot_arch = 0x03; + + fadt->flags |= ACPI_FADT_C2_MP_SUPPORTED + | ACPI_FADT_RESET_REGISTER |ACPI_FADT_PLATFORM_CLOCK; +} diff --git a/src/mainboard/kontron/986lcd_m/hda_verb.c b/src/mainboard/kontron/986lcd_m/hda_verb.c new file mode 100644 index 0000000..072a306 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/hda_verb.c @@ -0,0 +1,7 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/kontron/986lcd_m/irq_tables.c b/src/mainboard/kontron/986lcd_m/irq_tables.c new file mode 100644 index 0000000..a585122 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/irq_tables.c @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x1f<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x27b0, /* Device */ + 0, /* miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf, /* u8 checksum. */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe? + {0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA + {0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge + {0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC + {0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1 + {0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device + {0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge + {0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire + {0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge + {0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0}, + {0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0}, + {0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0}, + {0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0}, + {0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0}, + {0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0}, + {0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168 + {0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0}, + {0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/kontron/986lcd_m/mainboard.c b/src/mainboard/kontron/986lcd_m/mainboard.c new file mode 100644 index 0000000..afca796 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/mainboard.c @@ -0,0 +1,175 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <device/device.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/io.h> +#include <arch/interrupt.h> + +/* Hardware Monitor */ + +static u16 hwm_base = 0xa00; + +static void hwm_write(u8 reg, u8 value) +{ + outb(reg, hwm_base + 0x05); + outb(value, hwm_base + 0x06); +} + +static void hwm_bank(u8 bank) +{ + hwm_write(0x4e, bank); +} + +#define FAN_CRUISE_CONTROL_DISABLED 0 +#define FAN_CRUISE_CONTROL_SPEED 1 +#define FAN_CRUISE_CONTROL_THERMAL 2 + +#define FAN_SPEED_5625 0 +//#define FAN_TEMPERATURE_30DEGC 0 + +struct fan_speed { + u8 fan_in; + u16 fan_speed; +}; + +// FANIN Target Speed Register +// FANIN = 337500 / RPM +struct fan_speed fan_speeds[] = { + { 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 }, + { 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 }, + { 0x80, 2636 }, { 0x8d, 2393 }, { 0x9b, 2177 }, { 0xaa, 1985 }, + { 0xba, 1814 }, { 0xcb, 1662 }, { 0xdd, 1527 }, { 0xf0, 1406 } +}; + +struct temperature { + u8 deg_celsius; + u8 deg_fahrenheit; +}; + +struct temperature temperatures[] = { + { 30, 86 }, { 33, 91 }, { 36, 96 }, { 39, 102 }, + { 42, 107 }, { 45, 113 }, { 48, 118 }, { 51, 123 }, + { 54, 129 }, { 57, 134 }, { 60, 140 }, { 63, 145 }, + { 66, 150 }, { 69, 156 }, { 72, 161 }, { 75, 167 } +}; + +static void hwm_setup(void) +{ + int cpufan_control = 0, sysfan_control = 0; + int cpufan_speed = 0, sysfan_speed = 0; + int cpufan_temperature = 0, sysfan_temperature = 0; + + if (get_option(&cpufan_control, "cpufan_cruise_control") != CB_SUCCESS) + cpufan_control = FAN_CRUISE_CONTROL_DISABLED; + if (get_option(&cpufan_speed, "cpufan_speed") != CB_SUCCESS) + cpufan_speed = FAN_SPEED_5625; + //if (get_option(&cpufan_temperature, "cpufan_temperature") != CB_SUCCESS) + // cpufan_temperature = FAN_TEMPERATURE_30DEGC; + + if (get_option(&sysfan_control, "sysfan_cruise_control") != CB_SUCCESS) + sysfan_control = FAN_CRUISE_CONTROL_DISABLED; + if (get_option(&sysfan_speed, "sysfan_speed") != CB_SUCCESS) + sysfan_speed = FAN_SPEED_5625; + //if (get_option(&sysfan_temperature, "sysfan_temperature") != CB_SUCCESS) + // sysfan_temperature = FAN_TEMPERATURE_30DEGC; + + // hwm_write(0x31, 0x20); // AVCC high limit + // hwm_write(0x34, 0x06); // VIN2 low limit + + hwm_bank(0); + hwm_write(0x59, 0x20); // Diode Selection + hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor + + hwm_bank(4); + hwm_write(0x54, 0xf1); // SYSTIN temperature offset + hwm_write(0x55, 0x19); // CPUTIN temperature offset + hwm_write(0x56, 0xfc); // AUXTIN temperature offset + + hwm_bank(0x80); // Default + + u8 fan_config = 0; + // 00 FANOUT is Manual Mode + // 01 FANOUT is Thermal Cruise Mode + // 10 FANOUT is Fan Speed Cruise Mode + switch (cpufan_control) { + case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 4); break; + case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break; + } + switch (sysfan_control) { + case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 2); break; + case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break; + } + // This register must be written first + hwm_write(0x04, fan_config); + + switch (cpufan_control) { + case FAN_CRUISE_CONTROL_SPEED: + printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n", + fan_speeds[cpufan_speed].fan_speed); + hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed + break; + case FAN_CRUISE_CONTROL_THERMAL: + printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n", + temperatures[cpufan_temperature].deg_celsius, + temperatures[cpufan_temperature].deg_fahrenheit); + hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature + break; + } + + switch (sysfan_control) { + case FAN_CRUISE_CONTROL_SPEED: + printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n", + fan_speeds[sysfan_speed].fan_speed); + hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed + break; + case FAN_CRUISE_CONTROL_THERMAL: + printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n", + temperatures[sysfan_temperature].deg_celsius, + temperatures[sysfan_temperature].deg_fahrenheit); + hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature + break; + } + + hwm_write(0x0e, 0x02); // Fan Output Step Down Time + hwm_write(0x0f, 0x02); // Fan Output Step Up Time + + hwm_write(0x47, 0xaf); // FAN divisor register + hwm_write(0x4b, 0x84); // AUXFANIN speed divisor + + hwm_write(0x40, 0x01); // Init, but no SMI# +} + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 3); + hwm_setup(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/kontron/986lcd_m/mptable.c b/src/mainboard/kontron/986lcd_m/mptable.c new file mode 100644 index 0000000..03f7370 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/mptable.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct device *riser = NULL, *firewire = NULL; + int firewire_bus = 0, riser_bus = 0, isa_bus; + int ioapic_id; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + firewire = dev_find_device(0x104c, 0x8023, 0); + if (firewire) { + firewire_bus = firewire->bus->secondary; + } + + // If a riser card is used, this riser is detected on bus 4, so its secondary bus is the + // highest bus number on the pci bus. + riser = dev_find_device(0x3388, 0x0021, 0); + if (!riser) + riser = dev_find_device(0x3388, 0x0022, 0); + if (riser) { + riser_bus = riser->link_list->secondary; + } + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + ioapic_id = 2; + smp_write_ioapic(mc, ioapic_id, 0x20, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, ioapic_id, 0); + + /* Builtin devices on Bus 0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x4, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, ioapic_id, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, ioapic_id, 0x17); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, ioapic_id, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, ioapic_id, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, ioapic_id, 0x11); + + /* Internal PCI bus (Firewire, PCI slot) */ + if (firewire) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, firewire_bus, 0x0, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, firewire_bus, 0x4, ioapic_id, 0x14); + } + + if (riser) { + /* Old riser card */ + // riser slot top 5:8.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x20, ioapic_id, 0x14); + // riser slot middle 5:9.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x24, ioapic_id, 0x15); + // riser slot bottom 5:a.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x28, ioapic_id, 0x16); + + /* New Riser Card */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x30, ioapic_id, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x34, ioapic_id, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, riser_bus, 0x38, ioapic_id, 0x16); + } + + /* PCIe slot */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, ioapic_id, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x1, ioapic_id, 0x11); + + /* Onboard Ethernet */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x0, ioapic_id, 0x10); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 1); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/kontron/986lcd_m/romstage.c b/src/mainboard/kontron/986lcd_m/romstage.c new file mode 100644 index 0000000..2c12c5d --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/romstage.c @@ -0,0 +1,431 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include "option_table.h" +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <superio/winbond/w83627thg/w83627thg.h> +#include "northbridge/intel/i945/i945.h" +#include "northbridge/intel/i945/raminit.h" +#include "southbridge/intel/i82801gx/i82801gx.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) + +void setup_ich7_gpios(void) +{ + printk(BIOS_DEBUG, " GPIOS..."); + /* General Registers */ + outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xebffeeff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + /* Output Control Registers */ + outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + /* Input Control Registers */ + outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ +} + +static void ich7_enable_lpc(void) +{ + int lpt_en = 0; + if (read_option(lpt, 0) != 0) { + lpt_en = 1<<2; // enable LPT + } + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); + // Set COM1/COM2 decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); + // Enable COM1/COM2/KBD/SuperIO1+2 + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b | lpt_en); + // Enable HWM at 0xa00 + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01); + // COM3 decode + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9); + // COM4 decode + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x000402e9); + // io 0x300 decode + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000301); +} + +/* TODO: superio code should really not be in mainboard */ +static void pnp_enter_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0x87, port); + outb(0x87, port); +} + +static void pnp_exit_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0xaa, port); +} + +/* This box has two superios, so enabling serial becomes slightly excessive. + * We disable a lot of stuff to make sure that there are no conflicts between + * the two. Also set up the GPIOs from the beginning. This is the "no schematic + * but safe anyways" method. + */ +static void early_superio_config_w83627thg(void) +{ + device_t dev; + + dev=PNP_DEV(0x2e, W83627THG_SP1); + pnp_enter_func_mode(dev); + + pnp_write_config(dev, 0x24, 0xc6); // PNPCSV + + pnp_write_config(dev, 0x29, 0x43); // GPIO settings + pnp_write_config(dev, 0x2a, 0x40); // GPIO settings + + dev=PNP_DEV(0x2e, W83627THG_SP1); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 4); + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x2e, W83627THG_SP2); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x2f8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 3); + // pnp_write_config(dev, 0xf1, 4); // IRMODE0 + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x2e, W83627THG_KBC); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x60); + pnp_set_iobase(dev, PNP_IDX_IO1, 0x64); + // pnp_write_config(dev, 0xf0, 0x82); + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x2e, W83627THG_GAME_MIDI_GPIO1); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_write_config(dev, 0xf5, 0xff); // invert all GPIOs + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x2e, W83627THG_GPIO2); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 1); // Just enable it + + dev=PNP_DEV(0x2e, W83627THG_GPIO3); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_write_config(dev, 0xf0, 0xfb); // GPIO bit 2 is output + pnp_write_config(dev, 0xf1, 0x00); // GPIO bit 2 is 0 + pnp_write_config(dev, 0x30, 0x03); // Enable GPIO3+4. pnp_set_enable is not sufficient + + dev=PNP_DEV(0x2e, W83627THG_FDC); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + + dev=PNP_DEV(0x2e, W83627THG_PP); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + + /* Enable HWM */ + dev=PNP_DEV(0x2e, W83627THG_HWM); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0xa00); + pnp_set_enable(dev, 1); + + pnp_exit_func_mode(dev); + + dev=PNP_DEV(0x4e, W83627THG_SP1); + pnp_enter_func_mode(dev); + + pnp_set_logical_device(dev); // Set COM3 to sane non-conflicting values + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 11); + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x4e, W83627THG_SP2); + pnp_set_logical_device(dev); // Set COM4 to sane non-conflicting values + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x2e8); + pnp_set_irq(dev, PNP_IDX_IRQ0, 10); + pnp_set_enable(dev, 1); + + dev=PNP_DEV(0x4e, W83627THG_FDC); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + + dev=PNP_DEV(0x4e, W83627THG_PP); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + + dev=PNP_DEV(0x4e, W83627THG_KBC); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x00); + pnp_set_iobase(dev, PNP_IDX_IO1, 0x00); + + pnp_exit_func_mode(dev); +} + +static void rcba_config(void) +{ + u32 reg32; + + /* Set up virtual channel 0 */ + //RCBA32(0x0014) = 0x80000001; + //RCBA32(0x001c) = 0x03128010; + + /* Device 1f interrupt pin register */ + RCBA32(0x3100) = 0x00042210; + /* Device 1d interrupt pin register */ + RCBA32(0x310c) = 0x00214321; + + /* dev irq route register */ + RCBA16(0x3140) = 0x0132; + RCBA16(0x3142) = 0x3241; + RCBA16(0x3144) = 0x0237; + RCBA16(0x3146) = 0x3210; + RCBA16(0x3148) = 0x3210; + + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + /* Enable upper 128bytes of CMOS */ + RCBA32(0x3400) = (1 << 2); + + /* Now, this is a bit ugly. As per PCI specification, function 0 of a + * device always has to be implemented. So disabling ethernet port 1 + * would essentially disable all three ethernet ports of the mainboard. + * It's possible to rename the ports to achieve compatibility to the + * PCI spec but this will confuse all (static!) tables containing + * interrupt routing information. + * To avoid this, we enable (unused) port 6 and swap it with port 1 + * in the case that ethernet port 1 is disabled. Since no devices + * are connected to that port, we don't have to worry about interrupt + * routing. + */ + int port_shuffle = 0; + + /* Disable unused devices */ + reg32 = FD_ACMOD|FD_ACAUD|FD_PATA; + reg32 |= FD_PCIE6|FD_PCIE5|FD_PCIE4; + + if (read_option(ethernet1, 0) != 0) { + printk(BIOS_DEBUG, "Disabling ethernet adapter 1.\n"); + reg32 |= FD_PCIE1; + } + if (read_option(ethernet2, 0) != 0) { + printk(BIOS_DEBUG, "Disabling ethernet adapter 2.\n"); + reg32 |= FD_PCIE2; + } else { + if (reg32 & FD_PCIE1) + port_shuffle = 1; + } + if (read_option(ethernet3, 0) != 0) { + printk(BIOS_DEBUG, "Disabling ethernet adapter 3.\n"); + reg32 |= FD_PCIE3; + } else { + if (reg32 & FD_PCIE1) + port_shuffle = 1; + } + + if (port_shuffle) { + /* Enable PCIE6 again */ + reg32 &= ~FD_PCIE6; + /* Swap PCIE6 and PCIE1 */ + RCBA32(RPFN) = 0x00043215; + } + + reg32 |= 1; + + RCBA32(0x3418) = reg32; + + /* Enable PCIe Root Port Clock Gate */ + // RCBA32(0x341c) = 0x00000001; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA32(0x3418) |= (1 << 0); + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 reg32; + int boot_mode = 0; + int cbmem_was_initted; + + if (bist == 0) + enable_lapic(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + udelay(200 * 1000); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + + ich7_enable_lpc(); + early_superio_config_w83627thg(); + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + outb(0x6, 0xcf9); + while (1) asm("hlt"); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } else { + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); + } + } + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + sdram_initialize(boot_mode, NULL); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(); + + quick_ram_check(); + + MCHBAR16(SSKPD) = 0xCAFE; + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); + } +#endif +} diff --git a/src/mainboard/kontron/986lcd_m/smihandler.c b/src/mainboard/kontron/986lcd_m/smihandler.c new file mode 100644 index 0000000..9c86697 --- /dev/null +++ b/src/mainboard/kontron/986lcd_m/smihandler.c @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + gnvs->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} diff --git a/src/mainboard/kontron/Kconfig b/src/mainboard/kontron/Kconfig index f4ab89f..3fa4076 100644 --- a/src/mainboard/kontron/Kconfig +++ b/src/mainboard/kontron/Kconfig @@ -5,16 +5,16 @@ choice
config BOARD_KONTRON_986LCD_M bool "986LCD-M/mITX" -config BOARD_KONTRON_KT690 +config BOARD_KONTRON_KT690_MITX bool "KT690/mITX" -config BOARD_KONTRON_KTQM77 +config BOARD_KONTRON_KTQM77_MITX bool "KTQM77/mITX"
endchoice
-source "src/mainboard/kontron/986lcd-m/Kconfig" -source "src/mainboard/kontron/kt690/Kconfig" -source "src/mainboard/kontron/ktqm77/Kconfig" +source "src/mainboard/kontron/986lcd_m/Kconfig" +source "src/mainboard/kontron/kt690_mitx/Kconfig" +source "src/mainboard/kontron/ktqm77_mitx/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/kontron/kt690/Kconfig b/src/mainboard/kontron/kt690/Kconfig deleted file mode 100644 index 2891736..0000000 --- a/src/mainboard/kontron/kt690/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_KONTRON_KT690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_WINBOND_W83627DHG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select GFXUMA - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_1024 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default kontron/kt690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "KT690/mITX" - -config HEAP_SIZE - hex - default 0x8000 - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_KONTRON_KT690 diff --git a/src/mainboard/kontron/kt690/acpi/ide.asl b/src/mainboard/kontron/kt690/acpi/ide.asl deleted file mode 100644 index 7cee00d..0000000 --- a/src/mainboard/kontron/kt690/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/kontron/kt690/acpi/routing.asl b/src/mainboard/kontron/kt690/acpi/routing.asl deleted file mode 100644 index 95a7efe..0000000 --- a/src/mainboard/kontron/kt690/acpi/routing.asl +++ /dev/null @@ -1,262 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, // Link G? - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){ 0x0002FFFF, 0, 0, 18 }, - Package(){ 0x0002FFFF, 1, 0, 19 }, - Package(){ 0x0002FFFF, 2, 0, 16 }, - Package(){ 0x0002FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){ 0x0003FFFF, 0, 0, 19 }, - Package(){ 0x0003FFFF, 1, 0, 16 }, - Package(){ 0x0003FFFF, 2, 0, 17 }, - Package(){ 0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){ 0x0004FFFF, 0, 0, 16 }, - Package(){ 0x0004FFFF, 1, 0, 17 }, - Package(){ 0x0004FFFF, 2, 0, 18 }, - Package(){ 0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){ 0x0005FFFF, 0, 0, 17 }, - Package(){ 0x0005FFFF, 1, 0, 18 }, - Package(){ 0x0005FFFF, 2, 0, 19 }, - Package(){ 0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){ 0x0006FFFF, 0, 0, 18 }, - Package(){ 0x0006FFFF, 1, 0, 19 }, - Package(){ 0x0006FFFF, 2, 0, 16 }, - Package(){ 0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){ 0x0007FFFF, 0, 0, 19 }, - Package(){ 0x0007FFFF, 1, 0, 16 }, - Package(){ 0x0007FFFF, 2, 0, 17 }, - Package(){ 0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){ 0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){ 0x0013FFFF, 0, 0, 16 }, - Package(){ 0x0013FFFF, 1, 0, 17 }, - Package(){ 0x0013FFFF, 2, 0, 18 }, - Package(){ 0x0013FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){ 0x0014FFFF, 0, 0, 16 }, - Package(){ 0x0014FFFF, 1, 0, 17 }, - Package(){ 0x0014FFFF, 2, 0, 18 }, - Package(){ 0x0014FFFF, 3, 0, 19 }, - - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTC, 0 }, - Package(){0x0005FFFF, 1, INTD, 0 }, - Package(){0x0005FFFF, 2, INTA, 0 }, - Package(){0x0005FFFF, 3, INTB, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - Package(){0x0005FFFF, 2, 0, 16 }, - Package(){0x0005FFFF, 3, 0, 17 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/kontron/kt690/acpi/sata.asl b/src/mainboard/kontron/kt690/acpi/sata.asl deleted file mode 100644 index 1fadf40..0000000 --- a/src/mainboard/kontron/kt690/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/kontron/kt690/acpi/usb.asl b/src/mainboard/kontron/kt690/acpi/usb.asl deleted file mode 100644 index 8425002..0000000 --- a/src/mainboard/kontron/kt690/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/kontron/kt690/acpi_tables.c b/src/mainboard/kontron/kt690/acpi_tables.c deleted file mode 100644 index a3b35d5..0000000 --- a/src/mainboard/kontron/kt690/acpi_tables.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/kontron/kt690/board_info.txt b/src/mainboard/kontron/kt690/board_info.txt deleted file mode 100644 index fc42f53..0000000 --- a/src/mainboard/kontron/kt690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: mini -Board URL: http://emea.kontron.com/products/boards+and+mezzanines/embedded+motherboards... diff --git a/src/mainboard/kontron/kt690/cmos.layout b/src/mainboard/kontron/kt690/cmos.layout deleted file mode 100644 index d118897..0000000 --- a/src/mainboard/kontron/kt690/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -## -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/kontron/kt690/devicetree.cb b/src/mainboard/kontron/kt690/devicetree.cb deleted file mode 100644 index 22bdae9..0000000 --- a/src/mainboard/kontron/kt690/devicetree.cb +++ /dev/null @@ -1,126 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1488 0x6900 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - #device pnp 2e.6 off # SPI - #end - device pnp 2e.307 off # GPIO 1 - end - device pnp 2e.8 on # WDTO#, PLED - end - device pnp 2e.009 off # GPIO2 - end - device pnp 2e.109 off # GPIO3 - end - device pnp 2e.209 off # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b on # HWM - io 0x60 = 0xa10 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w83627dhg - #chip superio/smsc/fdc37n972 - # seems this chip is not used? - #end - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0888" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex - diff --git a/src/mainboard/kontron/kt690/dsdt.asl b/src/mainboard/kontron/kt690/dsdt.asl deleted file mode 100644 index bc3ad1f..0000000 --- a/src/mainboard/kontron/kt690/dsdt.asl +++ /dev/null @@ -1,1792 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "dsdt.aml", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "COREv2", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/kontron/kt690/fadt.c b/src/mainboard/kontron/kt690/fadt.c deleted file mode 100644 index c238cbe..0000000 --- a/src/mainboard/kontron/kt690/fadt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb acpi */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in _PR.CPU0, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/kontron/kt690/get_bus_conf.c b/src/mainboard/kontron/kt690/get_bus_conf.c deleted file mode 100644 index 084e2b1..0000000 --- a/src/mainboard/kontron/kt690/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/kontron/kt690/irq_tables.c b/src/mainboard/kontron/kt690/irq_tables.c deleted file mode 100644 index d1342ee..0000000 --- a/src/mainboard/kontron/kt690/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c deleted file mode 100644 index 717c399..0000000 --- a/src/mainboard/kontron/kt690/mainboard.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - -/******************************************************** -* dbm690t uses a BCM5789 as on-board NIC. -* It has a pin named LOW_POWER to enable it into LOW POWER state. -* In order to run NIC, we should let it out of Low power state. This pin is -* controlled by sb600 GPM3. -* RRG4.2.3 GPM as GPIO -* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: -* I/O C50, C51, C52, PM I/O94, 95, 96. -* RRG4.2.3.1 GPM pins as Input -* RRG4.2.3.2 GPM pins as Output -********************************************************/ -static void enable_onboard_nic(void) -{ - u8 byte; - - printk(BIOS_INFO, "%s.\n", __func__); - - /* set index register 0C50h to 13h (miscellaneous control) */ - outb(0x13, 0xC50); /* CMIndex */ - - /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x40; - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); - - /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */ - byte = inb(0xC51); - byte &= 0x3F; - byte |= 0x80; /* 7:6=10 */ - outb(byte, 0xC51); - - /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */ - byte = inb(0xC52); - byte &= ~0x8; - outb(byte, 0xC52); -} - -/******************************************************** -* dbm690t uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void get_ide_dma66(void) -{ - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - printk(BIOS_INFO, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - pci_write_config8(ide_dev, 0x56, byte); -} - -/* - * set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in dbm690t board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - get_ide_dma66(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/kontron/kt690/mptable.c b/src/mainboard/kontron/kt690/mptable.c deleted file mode 100644 index 8b86b02..0000000 --- a/src/mainboard/kontron/kt690/mptable.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/kontron/kt690/resourcemap.c b/src/mainboard/kontron/kt690/resourcemap.c deleted file mode 100644 index bfa28af..0000000 --- a/src/mainboard/kontron/kt690/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_kt690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/kontron/kt690/romstage.c b/src/mainboard/kontron/kt690/romstage.c deleted file mode 100644 index 24cae41..0000000 --- a/src/mainboard/kontron/kt690/romstage.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <spd.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include <cpu/amd/mtrr.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_kt690_resource_map(); - - setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - printk(BIOS_SPEW, "... because cpuid returned %08x\n", cpuid1.edx); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - rs690_before_pci_init(); - sb600_before_pci_init(); - - post_cache_as_ram(); -} diff --git a/src/mainboard/kontron/kt690_mitx/Kconfig b/src/mainboard/kontron/kt690_mitx/Kconfig new file mode 100644 index 0000000..970f6cc --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/Kconfig @@ -0,0 +1,60 @@ +if BOARD_KONTRON_KT690_MITX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_S1G1 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_RS690 + select SOUTHBRIDGE_AMD_SB600 + select SUPERIO_WINBOND_W83627DHG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select GFXUMA + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_1024 + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default kontron/kt690_mitx + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "KT690/mITX" + +config HEAP_SIZE + hex + default 0x8000 + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_KONTRON_KT690_MITX diff --git a/src/mainboard/kontron/kt690_mitx/acpi/ide.asl b/src/mainboard/kontron/kt690_mitx/acpi/ide.asl new file mode 100644 index 0000000..7cee00d --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/kontron/kt690_mitx/acpi/routing.asl b/src/mainboard/kontron/kt690_mitx/acpi/routing.asl new file mode 100644 index 0000000..95a7efe --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/acpi/routing.asl @@ -0,0 +1,262 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 1, INTA, 0 }, // Link G? + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 2, INTC, 0 }, + Package(){0x0013FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){ 0x0002FFFF, 0, 0, 18 }, + Package(){ 0x0002FFFF, 1, 0, 19 }, + Package(){ 0x0002FFFF, 2, 0, 16 }, + Package(){ 0x0002FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){ 0x0003FFFF, 0, 0, 19 }, + Package(){ 0x0003FFFF, 1, 0, 16 }, + Package(){ 0x0003FFFF, 2, 0, 17 }, + Package(){ 0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){ 0x0004FFFF, 0, 0, 16 }, + Package(){ 0x0004FFFF, 1, 0, 17 }, + Package(){ 0x0004FFFF, 2, 0, 18 }, + Package(){ 0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){ 0x0005FFFF, 0, 0, 17 }, + Package(){ 0x0005FFFF, 1, 0, 18 }, + Package(){ 0x0005FFFF, 2, 0, 19 }, + Package(){ 0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){ 0x0006FFFF, 0, 0, 18 }, + Package(){ 0x0006FFFF, 1, 0, 19 }, + Package(){ 0x0006FFFF, 2, 0, 16 }, + Package(){ 0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){ 0x0007FFFF, 0, 0, 19 }, + Package(){ 0x0007FFFF, 1, 0, 16 }, + Package(){ 0x0007FFFF, 2, 0, 17 }, + Package(){ 0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){ 0x0012FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){ 0x0013FFFF, 0, 0, 16 }, + Package(){ 0x0013FFFF, 1, 0, 17 }, + Package(){ 0x0013FFFF, 2, 0, 18 }, + Package(){ 0x0013FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){ 0x0014FFFF, 0, 0, 16 }, + Package(){ 0x0014FFFF, 1, 0, 17 }, + Package(){ 0x0014FFFF, 2, 0, 18 }, + Package(){ 0x0014FFFF, 3, 0, 19 }, + + }) + + Name(PR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTC, 0 }, + Package(){0x0005FFFF, 1, INTD, 0 }, + Package(){0x0005FFFF, 2, INTA, 0 }, + Package(){0x0005FFFF, 3, INTB, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + Package(){0x0005FFFF, 2, 0, 16 }, + Package(){0x0005FFFF, 3, 0, 17 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/kontron/kt690_mitx/acpi/sata.asl b/src/mainboard/kontron/kt690_mitx/acpi/sata.asl new file mode 100644 index 0000000..1fadf40 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/kontron/kt690_mitx/acpi/usb.asl b/src/mainboard/kontron/kt690_mitx/acpi/usb.asl new file mode 100644 index 0000000..8425002 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/kontron/kt690_mitx/acpi_tables.c b/src/mainboard/kontron/kt690_mitx/acpi_tables.c new file mode 100644 index 0000000..a3b35d5 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/acpi_tables.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "northbridge/amd/amdk8/acpi.h" +#include <arch/cpu.h> +#include <cpu/amd/powernow.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + get_bus_conf(); + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB600 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/kontron/kt690_mitx/board_info.txt b/src/mainboard/kontron/kt690_mitx/board_info.txt new file mode 100644 index 0000000..fc42f53 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/board_info.txt @@ -0,0 +1,2 @@ +Category: mini +Board URL: http://emea.kontron.com/products/boards+and+mezzanines/embedded+motherboards... diff --git a/src/mainboard/kontron/kt690_mitx/cmos.layout b/src/mainboard/kontron/kt690_mitx/cmos.layout new file mode 100644 index 0000000..d118897 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/kontron/kt690_mitx/devicetree.cb b/src/mainboard/kontron/kt690_mitx/devicetree.cb new file mode 100644 index 0000000..22bdae9 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/devicetree.cb @@ -0,0 +1,126 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_S1G1 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1488 0x6900 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 5.0 on end # Internal Graphics 0x791F + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/winbond/w83627dhg + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + #device pnp 2e.6 off # SPI + #end + device pnp 2e.307 off # GPIO 1 + end + device pnp 2e.8 on # WDTO#, PLED + end + device pnp 2e.009 off # GPIO2 + end + device pnp 2e.109 off # GPIO3 + end + device pnp 2e.209 off # GPIO4 + end + device pnp 2e.309 off # GPIO5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b on # HWM + io 0x60 = 0xa10 + end + device pnp 2e.c off # PECI, SST + end + end #superio/winbond/w83627dhg + #chip superio/smsc/fdc37n972 + # seems this chip is not used? + #end + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "hda_viddid" = "0x10ec0888" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/kontron/kt690_mitx/dsdt.asl b/src/mainboard/kontron/kt690_mitx/dsdt.asl new file mode 100644 index 0000000..bc3ad1f --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/dsdt.asl @@ -0,0 +1,1792 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "dsdt.aml", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "COREv2", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve) + { + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + + Method(CIRQ, 0x00, NotSerialized) + { + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00120000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE IT8712F Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the IT8712F MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* IT8712F magic number */ + } + /* Exit the IT8712F MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + + /* + * Keyboard PME is routed to SB600 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("IT8712F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/kontron/kt690_mitx/fadt.c b/src/mainboard/kontron/kt690_mitx/fadt.c new file mode 100644 index 0000000..c238cbe --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/fadt.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "southbridge/amd/sb600/sb600.h" + +/*extern*/ u16 pm_base = 0x800; +/* pm_base should be set in sb acpi */ +/* pm_base should be got from bar2 of rs690. Here I compact ACPI + * registers into 32 bytes limit. + * */ + +#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + pm_base &= 0xFFFF; + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); + pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); + pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); + pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in _PR.CPU0, 6 bytes */ + pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); + pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); + + pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ + pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ + + pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); + pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 20-2B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ + pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/kontron/kt690_mitx/get_bus_conf.c b/src/mainboard/kontron/kt690_mitx/get_bus_conf.c new file mode 100644 index 0000000..084e2b1 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs690[8]; +u8 bus_sb600[2]; +u32 apicid_sb600; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs690; +u32 sbdn_sb600; + + + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs690 = sysconf.sbdn; + sbdn_sb600 = 0; + + for (i = 0; i < 2; i++) { + bus_sb600[i] = 0; + } + for (i = 0; i < 8; i++) { + bus_rs690[i] = 0; + } + + bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb600[0] = bus_rs690[0]; + + /* sb600 */ + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); + if (dev) { + bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs690 */ + for (i = 1; i < 8; i++) { + dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); + if (dev) { + bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb600 = apicid_base + 0; +} diff --git a/src/mainboard/kontron/kt690_mitx/irq_tables.c b/src/mainboard/kontron/kt690_mitx/irq_tables.c new file mode 100644 index 0000000..d1342ee --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/irq_tables.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; +extern unsigned long sbdn_sb600; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb600[0]; + pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/kontron/kt690_mitx/mainboard.c b/src/mainboard/kontron/kt690_mitx/mainboard.c new file mode 100644 index 0000000..717c399 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/mainboard.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb600/sb600.h> + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ +#define SMBUS_IO_BASE 0x1000 + +extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, + u8 val); +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + + +/******************************************************** +* dbm690t uses a BCM5789 as on-board NIC. +* It has a pin named LOW_POWER to enable it into LOW POWER state. +* In order to run NIC, we should let it out of Low power state. This pin is +* controlled by sb600 GPM3. +* RRG4.2.3 GPM as GPIO +* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers: +* I/O C50, C51, C52, PM I/O94, 95, 96. +* RRG4.2.3.1 GPM pins as Input +* RRG4.2.3.2 GPM pins as Output +********************************************************/ +static void enable_onboard_nic(void) +{ + u8 byte; + + printk(BIOS_INFO, "%s.\n", __func__); + + /* set index register 0C50h to 13h (miscellaneous control) */ + outb(0x13, 0xC50); /* CMIndex */ + + /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */ + byte = inb(0xC51); + byte &= 0x3F; + byte |= 0x40; + outb(byte, 0xC51); + + /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */ + byte = inb(0xC52); + byte &= ~0x8; + outb(byte, 0xC52); + + /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */ + byte = inb(0xC51); + byte &= 0x3F; + byte |= 0x80; /* 7:6=10 */ + outb(byte, 0xC51); + + /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */ + byte = inb(0xC52); + byte &= ~0x8; + outb(byte, 0xC52); +} + +/******************************************************** +* dbm690t uses SB600 GPIO9 to detect IDE_DMA66. +* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to +* get the cable type, 40 pin or 80 pin? +********************************************************/ +static void get_ide_dma66(void) +{ + u8 byte; + struct device *sm_dev; + struct device *ide_dev; + + printk(BIOS_INFO, "%s.\n", __func__); + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + byte = pci_read_config8(sm_dev, 0xA9); + byte |= (1 << 5); /* Set Gpio9 as input */ + pci_write_config8(sm_dev, 0xA9, byte); + + ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); + byte = pci_read_config8(ide_dev, 0x56); + byte &= ~(7 << 0); + if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) + byte |= 2 << 0; /* mode 2 */ + else + byte |= 5 << 0; /* mode 5 */ + pci_write_config8(ide_dev, 0x56, byte); +} + +/* + * set thermal config + */ +static void set_thermal_config(void) +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb600 settings for thermal config */ + /* set SB600 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/************************************************* +* enable the dedicated function in dbm690t board. +* This function called early than rs690_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard KT690 Enable. dev=0x%p\n", dev); + + enable_onboard_nic(); + get_ide_dma66(); + set_thermal_config(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/kontron/kt690_mitx/mptable.c b/src/mainboard/kontron/kt690_mitx/mptable.c new file mode 100644 index 0000000..8b86b02 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/mptable.c @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; + +extern u32 apicid_sb600; + +extern u32 sbdn_rs690; +extern u32 sbdn_sb600; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb600[0], + PCI_DEVFN(sbdn_sb600 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb600, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/kontron/kt690_mitx/resourcemap.c b/src/mainboard/kontron/kt690_mitx/resourcemap.c new file mode 100644 index 0000000..bfa28af --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_kt690_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/kontron/kt690_mitx/romstage.c b/src/mainboard/kontron/kt690_mitx/romstage.c new file mode 100644 index 0000000..24cae41 --- /dev/null +++ b/src/mainboard/kontron/kt690_mitx/romstage.c @@ -0,0 +1,155 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <spd.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627dhg/w83627dhg.h> +#include <cpu/amd/mtrr.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/amd/rs690/early_setup.c" +#include "southbridge/amd/sb600/early_setup.c" + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(u32 device, u32 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; + int needs_reset = 0; + u32 bsp_apicid = 0; + msr_t msr; + struct cpuid_result cpuid1; + struct sys_info *sysinfo = &sysinfo_car; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + /* sb600_lpc_port80(); */ + sb600_pci_port80(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + enable_rs690_dev8(); + sb600_lpc_init(); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); + + setup_kt690_resource_map(); + + setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched */ + wait_all_core0_started(); + start_other_cores(); +#endif + wait_all_aps_started(bsp_apicid); + + ht_setup_chains_x(sysinfo); + + /* run _early_setup before soft-reset. */ + rs690_early_setup(); + sb600_early_setup(); + + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + cpuid1 = cpuid(0x80000007); + if ((cpuid1.edx & 0x6) == 0x6) { + /* Read FIDVID_STATUS */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + /* show final fid and vid */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + } else { + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); + printk(BIOS_SPEW, "... because cpuid returned %08x\n", cpuid1.edx); + } + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + rs690_htinit(); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now; */ + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", + sysinfo->nodes, sysinfo->ctrl, spd_addr); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + rs690_before_pci_init(); + sb600_before_pci_init(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/kontron/ktqm77/Kconfig b/src/mainboard/kontron/ktqm77/Kconfig deleted file mode 100644 index d1a7d42..0000000 --- a/src/mainboard/kontron/ktqm77/Kconfig +++ /dev/null @@ -1,78 +0,0 @@ -if BOARD_KONTRON_KTQM77 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_IVYBRIDGE - select SOUTHBRIDGE_INTEL_C216 - select SUPERIO_WINBOND_W83627DHG - select EC_KONTRON_IT8516E - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select ENABLE_VMX - select HAVE_MRC - -config MAINBOARD_DIR - string - default kontron/ktqm77 - -config MAINBOARD_PART_NUMBER - string - default "KTQM77/mITX" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 8 - -config VGA_BIOS_FILE - string - default "pci8086,0166.rom" - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x0000 # TODO - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x0000 # TODO - -config MAINBOARD_VENDOR - string - default "Kontron" - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -config HAVE_GBE_BIN - bool - default n - -config IFD_BIOS_SECTION - string - default "0x00580000:0x007fffff" - -config IFD_ME_SECTION - string - default "0x00003000:0x0057ffff" - -config IFD_GBE_SECTION - string - default "0x00001000:0x00002fff" - -endif # BOARD_KONTRON_KTQM77 diff --git a/src/mainboard/kontron/ktqm77/acpi/ec.asl b/src/mainboard/kontron/ktqm77/acpi/ec.asl deleted file mode 100644 index 7925e0d..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/ec.asl +++ /dev/null @@ -1,7 +0,0 @@ -#define IT8516E_EC_DEV EC0 -#define SUPERIO_PNP_BASE 0x20e -#define IT8516E_FIRST_DATA 0x62 -#define IT8516E_FIRST_SC 0x66 -#define IT8516E_SECOND_DATA 0x20c -#define IT8516E_SECOND_SC 0x20d -#include <ec/kontron/it8516e/acpi/ec.asl> diff --git a/src/mainboard/kontron/ktqm77/acpi/mainboard.asl b/src/mainboard/kontron/ktqm77/acpi/mainboard.asl deleted file mode 100644 index 10b1c11..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/mainboard.asl +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Scope (_SB) { - Device (PWRB) - { - Name (_HID, EisaId("PNP0C0C")) - } -} diff --git a/src/mainboard/kontron/ktqm77/acpi/platform.asl b/src/mainboard/kontron/ktqm77/acpi/platform.asl deleted file mode 100644 index ff6d94d..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/platform.asl +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl b/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index ceb40be..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Ivybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // LPC devices 0:1f.x - // D31IP_TTIP THRT INTC -> PIRQC - Package() { 0x001fffff, 2, 0, 18 },// D31IP_SMIP SMBUS INTC -> PIRQC - Package() { 0x001fffff, 1, 0, 19 },// D31IP_SIP SATA INTB -> PIRQD (MSI) - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 23 },// D29IP_E1P EHCI1 INTA -> PIRQH - // PCIe Root Ports 0:1c.x - // D28IP_P8IP Slot? INTD -> PIRQD - Package() { 0x001cffff, 3, 0, 19 },// D28IP_P4IP ETH2 INTD -> PIRQD (MSI) - // D28IP_P7IP PCIEx1 INTC -> PIRQC - Package() { 0x001cffff, 2, 0, 18 },// D28IP_P3IP ETH1 INTC -> PIRQC (MSI) - // D28IP_P6IP 1394 INTB -> PIRQB (MSI) - Package() { 0x001cffff, 1, 0, 17 },// D28IP_P2IP Slot? INTB -> PIRQB - // D28IP_P5IP GbEPHY INTA -> PIRQA - Package() { 0x001cffff, 0, 0, 16 },// D28IP_P1IP Slot? INTA -> PIRQA - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 },// D27IP_ZIP HDA INTA -> PIRQG (MSI) - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 16 },// D26IP_E2P EHCI2 INTA -> PIRQA - // ETH0 0:19.0 - Package() { 0x0019ffff, 0, 0, 20 },// D25IP_LIP ETH0 INTA -> PIRQE (MSI) - // xHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 16 },// D20IP_XHCIIP xHCI INTA -> PIRQA (MSI) - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // PCIe PEG x16 0:1.0 - Package() { 0x0001ffff, 3, 0, 19 },// PEGx16 INTD -> PIRQD - Package() { 0x0001ffff, 2, 0, 18 },// PEGx16 INTC -> PIRQC - Package() { 0x0001ffff, 1, 0, 17 },// PEGx16 INTB -> PIRQB - Package() { 0x0001ffff, 0, 0, 16 },// PEGx16 INTA -> PIRQA - }) - } Else { - Return (Package() { - // LPC devices 0:1f.x - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // ETH0 0:19.0 - Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, - // xHCI 0:14.0 - Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe PEG x16 0:1.0 - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/kontron/ktqm77/acpi/superio.asl b/src/mainboard/kontron/ktqm77/acpi/superio.asl deleted file mode 100644 index 1ed4c93..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/superio.asl +++ /dev/null @@ -1,12 +0,0 @@ -#undef SUPERIO_DEV -#undef SUPERIO_PNP_BASE -#undef W83627DHG_SHOW_UARTA -#undef W83627DHG_SHOW_UARTB -#undef W83627DHG_SHOW_KBC -#undef W83627DHG_SHOW_PS2M -#undef W83627DHG_SHOW_HWMON -#define SUPERIO_DEV SIO0 -#define SUPERIO_PNP_BASE 0x2e -#define W83627DHG_SHOW_UARTA 1 -#define W83627DHG_SHOW_UARTB 1 -#include <superio/winbond/w83627dhg/acpi/superio.asl> diff --git a/src/mainboard/kontron/ktqm77/acpi/thermal.asl b/src/mainboard/kontron/ktqm77/acpi/thermal.asl deleted file mode 100644 index 093151a..0000000 --- a/src/mainboard/kontron/ktqm77/acpi/thermal.asl +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -// Thermal Zone - -Scope (_TZ) -{ - ThermalZone (THRM) - { - Name (_TC1, 0x02) - Name (_TC2, 0x05) - - // Thermal zone polling frequency: 10 seconds - Name (_TZP, 100) - - // Thermal sampling period for passive cooling: 2 seconds - Name (_TSP, 20) - - // Convert from Degrees C to 1/10 Kelvin for ACPI - Method (CTOK, 1) { - // 10th of Degrees C - Multiply (Arg0, 10, Local0) - - // Convert to Kelvin - Add (Local0, 2732, Local0) - - Return (Local0) - } - - // Threshold for OS to shutdown - Method (_CRT, 0, Serialized) - { - Return (CTOK (\TCRT)) - } - - // Threshold for passive cooling - Method (_PSV, 0, Serialized) - { - Return (CTOK (\TPSV)) - } - - // Processors used for passive cooling - Method (_PSL, 0, Serialized) - { - Return (\PPKG ()) - } - - Method (_TMP, 0, Serialized) - { - // Return CPU Temperature from EC - Return (_SB.PCI0.LPCB.EC0.PM1.CTK ()) - } - -// The EC does all fan control. There is no Active Cooling Fan control (_ACx). - } -} diff --git a/src/mainboard/kontron/ktqm77/acpi_tables.c b/src/mainboard/kontron/ktqm77/acpi_tables.c deleted file mode 100644 index 0d90403..0000000 --- a/src/mainboard/kontron/ktqm77/acpi_tables.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> - -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - /* EC handles all thermal and fan control on Butterfly. */ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Disable USB ports in S3 by default */ - gnvs->s3u0 = 0; - gnvs->s3u1 = 0; - - /* Disable USB ports in S5 by default */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* IGD Displays */ - gnvs->ndid = 0; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/kontron/ktqm77/board_info.txt b/src/mainboard/kontron/ktqm77/board_info.txt deleted file mode 100644 index 2e1c3cd..0000000 --- a/src/mainboard/kontron/ktqm77/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: mini diff --git a/src/mainboard/kontron/ktqm77/cmos.layout b/src/mainboard/kontron/ktqm77/cmos.layout deleted file mode 100644 index 621d958..0000000 --- a/src/mainboard/kontron/ktqm77/cmos.layout +++ /dev/null @@ -1,181 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -401 3 e 12 gfx_uma_size - -#404 4 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -411 1 e 11 sata_mode -#412 4 r 0 unused - -# coreboot config options: additional mainboard options -416 4 e 10 systemp_type -420 7 h 0 fan1_min -427 7 h 0 fan1_max -434 7 h 0 fan2_min -441 7 h 0 fan2_max - -# coreboot config options: bootloader -448 64 r 0 write_protected_by_bios -512 328 s 0 boot_devices -840 8 h 0 boot_default -848 1 e 9 cmos_defaults_loaded -849 1 e 2 ethernet1 -850 1 e 2 ethernet2 -#851 5 r 0 unused - -# coreboot config options: mainboard specific options -856 2 e 8 fan1_mode -858 2 r 0 fan1_reserved -860 2 e 8 fan2_mode -862 2 r 0 fan2_reserved -864 16 h 0 fan1_target -880 16 h 0 fan2_target - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 -960 16 r 0 mrc_scrambler_seed_chk - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Auto -8 1 PWM -8 2 Speed -8 3 Thermal -9 0 No -9 1 Yes -10 0 None -10 1 AMD -10 2 LM75@90 -10 3 GPIO16 -10 4 LM75@9e -11 0 AHCI -11 1 Compatible -12 0 32M -12 1 64M -12 2 96M -12 3 128M -12 4 160M -12 5 192M -12 6 224M - -# ----------------------------------------------------------------- -checksums - -checksum 392 895 984 diff --git a/src/mainboard/kontron/ktqm77/devicetree.cb b/src/mainboard/kontron/ktqm77/devicetree.cb deleted file mode 100644 index f6390ac..0000000 --- a/src/mainboard/kontron/ktqm77/devicetree.cb +++ /dev/null @@ -1,161 +0,0 @@ -chip northbridge/intel/sandybridge - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Coordinate with HW_ALL - register "pstate_coord_type" = "0xfe" # TODO: This is never read. - - register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "0" # ACPI(C3) = MWAIT(C7) - - register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_battery" = "4" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "0" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 01.0 on end # PCIe Bridge x16 - device pci 02.0 on end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8b" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x8b" - register "pirqf_routing" = "0x8b" - register "pirqg_routing" = "0x8b" - register "pirqh_routing" = "0x8b" - - # Enable all SATA ports 0-5 - register "sata_port_map" = "0x3f" - # Set max SATA speed to 6.0 Gb/s (should be the default, anyway) - register "sata_interface_speed_support" = "0x3" - - # TODO: Enable generic LPC decodes... - register "gen1_dec" = "0x001c02e1" - #register "gen2_dec" = "0x00000000" - #register "gen3_dec" = "0x00000000" - #register "gen4_dec" = "0x00000000" - - # Disable root port coalescing - register "pcie_port_coalesce" = "0" - - device pci 14.0 on end # USB 3.0 Controller - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 on end # High Definition Audio - - # Disabling 1c.0 might break IRQ settings as it enables port coalescing - # There are two mini PCIe x1 sockets, so one PCIe port is unrouted - device pci 1c.0 on end # PCIe Port #1 mini PCIe x1? - device pci 1c.1 on end # PCIe Port #2 mini PCIe x1? - device pci 1c.2 on end # PCIe Port #3 second Ethernet NIC - device pci 1c.3 on end # PCIe Port #4 third Ethernet NIC - device pci 1c.4 on end # PCIe Port #5 first Ethernet PHY - device pci 1c.5 on end # PCIe Port #6 FireWire - device pci 1c.6 on end # PCIe Port #7 PCIe x1 - device pci 1c.7 on end # PCIe Port #8 mini PCIe x1? - - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on #LPC bridge - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - end - device pnp 2e.1 off # Parallel Port - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 off # Keyboard - end - device pnp 2e.6 off # SPI - end - device pnp 2e.307 off # GPIO 1 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 on # GPIO2 -- original firmware sets this on - end - device pnp 2e.109 on # GPIO3 -- original firmware sets this on - end - device pnp 2e.209 off # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b off # HWM - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w83627dhg - chip ec/kontron/it8516e - # Set CPU Fan to 50°C, System Fan to 75% - register "default_fan_mode" = "{ IT8516E_MODE_THERMAL, IT8516E_MODE_PWM }" - register "default_fan_target" = "{ 50, 75 }" - - # TODO: Check status when Linux runs - device pnp 20e.1 on # Com3 - io 0x60 = 0x03e8 - irq 0x70 = 4 - end - device pnp 20e.2 on # Com4 - io 0x60 = 0x02e8 - irq 0x70 = 3 - end - device pnp 20e.4 off # System Wakeup - end - device pnp 20e.5 on # Mouse - irq 0x70 = 12 - end - device pnp 20e.6 on # Keyboard - io 0x60 = 0x0060 - io 0x62 = 0x0064 - irq 0x70 = 1 - end - device pnp 20e.f off # Shared Memory - end - device pnp 20e.10 off # BRAM / RTC - end - device pnp 20e.11 on # PM channel 1 - io 0x60 = 0x0062 - io 0x62 = 0x0066 - irq 0x70 = 0 - end - device pnp 20e.12 on # PM channel 2 - io 0x60 = 0x020c - io 0x62 = 0x020d - irq 0x70 = 0 - end - device pnp 20e.17 off # PM channel 3 - end - end #ec/kontron/it8516e - # TODO: TPM on 4e - end # LPC bridge - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 off end # Thermal - end - end -end diff --git a/src/mainboard/kontron/ktqm77/dsdt.asl b/src/mainboard/kontron/ktqm77/dsdt.asl deleted file mode 100644 index 3af7a0e..0000000 --- a/src/mainboard/kontron/ktqm77/dsdt.asl +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - #include "acpi/mainboard.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include "acpi/thermal.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/kontron/ktqm77/fadt.c b/src/mainboard/kontron/ktqm77/fadt.c deleted file mode 100644 index b8da1be..0000000 --- a/src/mainboard/kontron/ktqm77/fadt.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> - -/* FIXME: This needs to go into a separate .h file - * to be included by the ich7 smi handler, ich7 smi init - * code and the mainboard fadt. - */ -#define APM_CNT 0xb2 -#define CST_CONTROL 0x85 -#define PST_CONTROL 0x80 -#define ACPI_DISABLE 0x1e -#define ACPI_ENABLE 0xe1 -#define GNVS_UPDATE 0xea - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = ACPI_ENABLE; - fadt->acpi_disable = ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 101; /* c2 not supported */ - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 64; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/kontron/ktqm77/gpio.h b/src/mainboard/kontron/ktqm77/gpio.h deleted file mode 100644 index f99e028..0000000 --- a/src/mainboard/kontron/ktqm77/gpio.h +++ /dev/null @@ -1,303 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef KTQM77_GPIO_H -#define KTQM77_GPIO_H - -#include "southbridge/intel/bd82x6x/gpio.h" - -/* - * TODO: Investigate somehow... Current values are taken from a running - * system with vendor supplied firmware. - */ - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio1 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio2 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio3 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio4 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio5 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio6 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio7 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio8 = GPIO_MODE_GPIO, /* Unknown Output LOW*/ - .gpio9 = GPIO_MODE_NATIVE, /* Native - OC5# pin */ - .gpio10 = GPIO_MODE_NATIVE, /* Native - OC6# pin */ - .gpio11 = GPIO_MODE_NATIVE, /* Native - SMBALERT# pin */ - .gpio12 = GPIO_MODE_NATIVE, /* Native - LAN_PHY_PWR_CTRL */ - .gpio13 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio14 = GPIO_MODE_NATIVE, /* Native - OC7# pin */ - .gpio15 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio16 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio17 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio18 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ1# LAN clock pin */ - .gpio19 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio20 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio21 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio22 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio23 = GPIO_MODE_NATIVE, /* Native - LDRQ1# pin */ - .gpio24 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio25 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio26 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ4# pin */ - .gpio27 = GPIO_MODE_GPIO, /* Unknown Input */ /* Vendor supplied DSDT sets this conditionally - when going to suspend (S3, S4, S5). */ - .gpio28 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio29 = GPIO_MODE_NATIVE, /* Native - SLP_LAN# pin, forced by soft strap */ - .gpio30 = GPIO_MODE_NATIVE, /* Native - SUSWARN_EC# pin */ - .gpio31 = GPIO_MODE_NATIVE /* Native - ACPRESENT */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio1 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio2 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio3 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio4 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio5 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio6 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio7 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio8 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio9 = GPIO_DIR_INPUT, /* Native */ - .gpio10 = GPIO_DIR_INPUT, /* Native */ - .gpio11 = GPIO_DIR_INPUT, /* Native */ - .gpio12 = GPIO_DIR_INPUT, /* Native */ - .gpio13 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio14 = GPIO_DIR_INPUT, /* Native */ - .gpio15 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio16 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio17 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio18 = GPIO_DIR_INPUT, /* Native */ - .gpio19 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio20 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio21 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio22 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio23 = GPIO_DIR_INPUT, /* Native */ - .gpio24 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio25 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio26 = GPIO_DIR_INPUT, /* Native */ - .gpio27 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio28 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio29 = GPIO_DIR_INPUT, /* Native */ - .gpio30 = GPIO_DIR_INPUT, /* Native */ - .gpio31 = GPIO_DIR_INPUT, /* Native */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio1 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio2 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio3 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio4 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio5 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio6 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio7 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio8 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio9 = GPIO_LEVEL_LOW, /* Native */ - .gpio10 = GPIO_LEVEL_LOW, /* Native */ - .gpio11 = GPIO_LEVEL_LOW, /* Native */ - .gpio12 = GPIO_LEVEL_LOW, /* Native */ - .gpio13 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio14 = GPIO_LEVEL_LOW, /* Native */ - .gpio15 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio16 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio17 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio18 = GPIO_LEVEL_LOW, /* Native */ - .gpio19 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio20 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio21 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio22 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio23 = GPIO_LEVEL_LOW, /* Native */ - .gpio24 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio25 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio26 = GPIO_LEVEL_LOW, /* Native */ - .gpio27 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio28 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio29 = GPIO_LEVEL_LOW, /* Native */ - .gpio30 = GPIO_LEVEL_LOW, /* Native */ - .gpio31 = GPIO_LEVEL_LOW, /* Native */ -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, /* Native - CLKRUN# pin */ - .gpio33 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio34 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio35 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio36 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio37 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio38 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio39 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio40 = GPIO_MODE_NATIVE, /* Native - OC1# pin */ - .gpio41 = GPIO_MODE_NATIVE, /* Native - OC2# pin */ - .gpio42 = GPIO_MODE_NATIVE, /* Native - OC3# pin */ - .gpio43 = GPIO_MODE_NATIVE, /* Native - OC4# pin */ - .gpio44 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ5# pin */ - .gpio45 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ6# pin */ - .gpio46 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ7# pin */ - .gpio47 = GPIO_MODE_NATIVE, /* Native - PEG_A_CLKRQ# pin */ - .gpio48 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio49 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio50 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio51 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio52 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio53 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio54 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio55 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio56 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio57 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio58 = GPIO_MODE_NATIVE, /* Native - SML1CLK */ - .gpio59 = GPIO_MODE_NATIVE, /* Native - OC0# pin */ - .gpio60 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ - .gpio61 = GPIO_MODE_NATIVE, /* Native - SUS_STAT# pin*/ - .gpio62 = GPIO_MODE_NATIVE, /* Native - SUSCLK */ - .gpio63 = GPIO_MODE_NATIVE, /* Native - SLP_S5# */ -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, /* Native */ - .gpio33 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio34 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio35 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio36 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio37 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio38 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio39 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio40 = GPIO_DIR_INPUT, /* Native */ - .gpio41 = GPIO_DIR_INPUT, /* Native */ - .gpio42 = GPIO_DIR_INPUT, /* Native */ - .gpio43 = GPIO_DIR_INPUT, /* Native */ - .gpio44 = GPIO_DIR_INPUT, /* Native */ - .gpio45 = GPIO_DIR_INPUT, /* Native */ - .gpio46 = GPIO_DIR_INPUT, /* Native */ - .gpio47 = GPIO_DIR_INPUT, /* Native */ - .gpio48 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio49 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio50 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio51 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio52 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio53 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio54 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio55 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio56 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio57 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio58 = GPIO_DIR_INPUT, /* Native */ - .gpio59 = GPIO_DIR_INPUT, /* Native */ - .gpio60 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ - .gpio61 = GPIO_DIR_INPUT, /* Native */ - .gpio62 = GPIO_DIR_INPUT, /* Native */ - .gpio63 = GPIO_DIR_INPUT, /* Native */ -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_LOW, /* Native */ - .gpio33 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio34 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio35 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio36 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio37 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio38 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio39 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio40 = GPIO_LEVEL_LOW, /* Native */ - .gpio41 = GPIO_LEVEL_LOW, /* Native */ - .gpio42 = GPIO_LEVEL_LOW, /* Native */ - .gpio43 = GPIO_LEVEL_LOW, /* Native */ - .gpio44 = GPIO_LEVEL_LOW, /* Native */ - .gpio45 = GPIO_LEVEL_LOW, /* Native */ - .gpio46 = GPIO_LEVEL_LOW, /* Native */ - .gpio47 = GPIO_LEVEL_LOW, /* Native */ - .gpio48 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio49 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio50 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio51 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio52 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio53 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio54 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio55 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio56 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio57 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio58 = GPIO_LEVEL_LOW, /* Native */ - .gpio59 = GPIO_LEVEL_LOW, /* Native */ - .gpio60 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ - .gpio61 = GPIO_LEVEL_LOW, /* Native */ - .gpio62 = GPIO_LEVEL_LOW, /* Native */ - .gpio63 = GPIO_LEVEL_LOW, /* Native */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio65 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio66 = GPIO_MODE_GPIO, /* Unknown Output LOW */ - .gpio67 = GPIO_MODE_NATIVE, /* Native - CLKOUTFLEX3 */ - .gpio68 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio69 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio70 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio71 = GPIO_MODE_GPIO, /* Unknown Input */ - .gpio72 = GPIO_MODE_NATIVE, /* Native - nothing on mobile */ - .gpio73 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ0# pin */ - .gpio74 = GPIO_MODE_NATIVE, /* Native - SML1ALERT#/PCHHOT# pin */ - .gpio75 = GPIO_MODE_NATIVE, /* Native - SML1DATA */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio65 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio66 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ - .gpio67 = GPIO_DIR_INPUT, /* Native */ - .gpio68 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio69 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio70 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio71 = GPIO_DIR_INPUT, /* Unknown Input */ - .gpio72 = GPIO_DIR_INPUT, /* Native */ - .gpio73 = GPIO_DIR_INPUT, /* Native */ - .gpio74 = GPIO_DIR_INPUT, /* Native */ - .gpio75 = GPIO_DIR_INPUT, /* Native */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio65 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio66 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ - .gpio67 = GPIO_LEVEL_LOW, /* Native */ - .gpio68 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio69 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio70 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio71 = GPIO_LEVEL_LOW, /* Unknown Input */ - .gpio72 = GPIO_LEVEL_LOW, /* Native */ - .gpio73 = GPIO_LEVEL_LOW, /* Native */ - .gpio74 = GPIO_LEVEL_LOW, /* Native */ - .gpio75 = GPIO_LEVEL_LOW, /* Native */ -}; - -const struct pch_gpio_map ktqm77_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; -#endif diff --git a/src/mainboard/kontron/ktqm77/hda_verb.c b/src/mainboard/kontron/ktqm77/hda_verb.c deleted file mode 100644 index c957c25..0000000 --- a/src/mainboard/kontron/ktqm77/hda_verb.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012-2013 secunet Security Networks AG - * Copyright (C) 2013 Nico Huber nico.h@gmx.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x11060397, // Codec Vendor / Device ID: Via VT1708S - 0x11060000, // Subsystem ID - 0x0000000c, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x11060000 */ - AZALIA_SUBVENDOR(0x0, 0x11060000), - - /* Pin Widget Verb Table */ - - /* - * NID 0x19 [Port A (SURR)]: - * Jack Internal Speaker N/A Black - */ - AZALIA_PIN_CFG(0, 0x19, 0x10101112), - - /* - * NID 0x1a [Port B (MIC1/2)]: - * Jack Rear Mic In 1/8" Pink - */ - AZALIA_PIN_CFG(0, 0x1a, 0x01a19036), - - /* - * NID 0x1b [Port C (LINEIN)]: - * Jack Rear Line In 1/8" Blue - */ - AZALIA_PIN_CFG(0, 0x1b, 0x0181303e), - - /* - * NID 0x1c [Port D (Front)]: - * Jack Rear Line Out 1/8" Green - */ - AZALIA_PIN_CFG(0, 0x1c, 0x01014010), - - /* - * NID 0x1d [Port E (Front HP/MIC)]: - * Jack Front HP Out 1/8" Green - */ - AZALIA_PIN_CFG(0, 0x1d, 0x022141f0), - - /* - * NID 0x1e [Port F (Front HP/MIC)]: - * Jack Front Mic In 1/8" Pink - */ - AZALIA_PIN_CFG(0, 0x1e, 0x02a19138), - - /* - * NID 0x1f [CD]: - * Jack Int.(ATAPI) CD ATAPI internal Black - */ - AZALIA_PIN_CFG(0, 0x1f, 0x19331137), - - /* - * NID 0x20 [N/A]: - * Jack Rear S/PDIF Out RCA Unknown - */ - AZALIA_PIN_CFG(0, 0x20, 0x014401f0), - - /* - * NID 0x21 [N/A]: - * None Internal S/PDIF Out Other Digital Unknown - */ - AZALIA_PIN_CFG(0, 0x21, 0x504600f0), - - /* - * NID 0x22 [Port G (C/LFE)]: - * Jack Internal Speaker Unknown Orange - */ - AZALIA_PIN_CFG(0, 0x22, 0x10106111), - - /* - * NID 0x23 [Port H (SSL/SSR)]: - * Jack Internal Speaker Unknown Grey - */ - AZALIA_PIN_CFG(0, 0x23, 0x10102114), - - - /* coreboot specific header */ - 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x58560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/kontron/ktqm77/mainboard.c b/src/mainboard/kontron/ktqm77/mainboard.c deleted file mode 100644 index 715ec56..0000000 --- a/src/mainboard/kontron/ktqm77/mainboard.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#if CONFIG_VGA_ROM_RUN -#include <x86emu/x86emu.h> -#endif -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/bd82x6x/pch.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - -#if CONFIG_VGA_ROM_RUN -static int int15_handler(void) -{ - int res = 0; - - printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", - __func__, X86_AX, X86_BX, X86_CX, X86_DX); - - switch(X86_EAX & 0xffff) { - case 0x5f34: - /* - * Set Panel Fitting Hook: - * bit 2 = Graphics Stretching - * bit 1 = Text Stretching - * bit 0 = Centering (do not set with bit1 or bit2) - * 0 = video bios default - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x005f; - X86_ECX &= 0xffffff00; - X86_ECX |= 0x00; /* Use video bios default */ - res = 1; - break; - case 0x5f35: - /* - * Boot Display Device Hook: - * bit 0 = CRT - * bit 1 = TV (eDP) - * bit 2 = EFP - * bit 3 = LFP - * bit 4 = CRT2 - * bit 5 = TV2 (eDP) - * bit 6 = EFP2 - * bit 7 = LFP2 - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x005f; - X86_ECX &= 0xffff0000; - X86_ECX |= 0x0000; /* Use video bios default */ - res = 1; - break; - case 0x5f51: - /* - * Hook to select active LFP configuration: - * 00h = No LVDS, VBIOS does not enable LVDS - * 01h = Int-LVDS, LFP driven by integrated LVDS decoder - * 02h = SDVO-LVDS, LFP driven by SDVO decoder - * 03h = eDP, LFP Driven by Int-DisplayPort encoder - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x005f; - X86_ECX &= 0xffff0000; - X86_ECX |= 0x0000; /* TODO: Make this configurable in NVRAM? */ - res = 1; - break; - case 0x5f40: - /* - * Boot Panel Type Hook: - * BL(in): 00h = LFP, 01h = LFP2 - * CL(out): panel type id in table: 1..16 - */ - if (0 == (X86_EBX & 0xff)) { - X86_EAX &= 0xffff0000; - X86_EAX |= 0x015f; - res = 1; - } else if (1 == (X86_EBX & 0xff)) { - X86_EAX &= 0xffff0000; - X86_EAX |= 0x015f; - res = 1; - } else { - printk(BIOS_DEBUG, - "Unknown panel index %u " - "in INT15 function %04x!\n", - X86_EBX & 0xff, X86_EAX & 0xffff); - } - break; - case 0x5f52: - /* - * Panel Color Depth: - * 00h = 18 bit - * 01h = 24 bit - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x005f; - X86_ECX &= 0xffff0000; - X86_ECX |= 0x0001; - res = 1; - break; - case 0x5f14: - if ((X86_EBX & 0xffff) == 0x78f) { - /* - * Get Miscellaneous Status Hook: - * bit 2: AC power active? - * bit 1: lid closed? - * bit 0: docked? - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x015f; - res = 1; - } else { - printk(BIOS_DEBUG, - "Unknown BX 0x%04x in INT15 function %04x!\n", - X86_EBX & 0xffff, X86_EAX & 0xffff); - } - break; - case 0x5f49: - /* - * Get Inverter Type and Polarity: - * EBX: backlight control brightness: 0..255 - * ECX: - * 0 = Enable PWM inverted, 2 = Enable PWM - * 1 = Enable I2C inverted, 3 = Enable I2C - */ - X86_EAX &= 0xffff0000; - X86_EAX |= 0x015f; - res = 1; - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", - X86_EAX & 0xffff); - break; - } - return res; -} -#endif - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE - /* Install custom int15 handler for VGA OPROM */ - mainboard_interrupt_handlers(0x15, &int15_handler); -#endif - - unsigned disable = 0; - if ((get_option(&disable, "ethernet1") == CB_SUCCESS) && disable) { - device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2)); - if (nic) { - printk(BIOS_DEBUG, "DISABLE FIRST NIC!\n"); - nic->enabled = 0; - } - } - disable = 0; - if ((get_option(&disable, "ethernet2") == CB_SUCCESS) && disable) { - device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3)); - if (nic) { - printk(BIOS_DEBUG, "DISABLE SECOND NIC!\n"); - nic->enabled = 0; - } - } -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c deleted file mode 100644 index 401314c..0000000 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <console/console.h> -#include "northbridge/intel/sandybridge/sandybridge.h" -#include "northbridge/intel/sandybridge/raminit.h" -#include "southbridge/intel/bd82x6x/pch.h" -#include "southbridge/intel/bd82x6x/gpio.h" -#include <arch/cpu.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/msr.h> -#include "gpio.h" - -static void pch_enable_lpc(void) -{ - /* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */ - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070); - - /* Enable KBC on 0x06/0x64 (KBC), - * EC on 0x62/0x66 (MC), - * EC on 0x20c-0x20f (GAMEH), - * Super I/O on 0x2e/0x2f (CNF1), - * COM1/COM3 decode ranges. */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - KBC_LPC_EN | MC_LPC_EN | - CNF1_LPC_EN | GAMEH_LPC_EN | - COMA_LPC_EN | COMB_LPC_EN); -} - -static void rcba_config(void) -{ - u32 reg32; - - /* - * D31IP_TTIP THRT INTC -> PIRQC - * D31IP_SIP2 SATA2 NOINT - * D31IP_SMIP SMBUS INTC -> PIRQC - * D31IP_SIP SATA INTB -> PIRQD (MSI) - * D29IP_E1P EHCI1 INTA -> PIRQH - * D28IP_P8IP Slot? INTD -> PIRQD - * D28IP_P7IP PCIEx1 INTC -> PIRQC - * D28IP_P6IP 1394 INTB -> PIRQB (MSI) - * D28IP_P5IP GbEPHY INTA -> PIRQA - * D28IP_P4IP ETH2 INTD -> PIRQD (MSI) - * D28IP_P3IP ETH1 INTC -> PIRQC (MSI) - * D28IP_P2IP Slot? INTB -> PIRQB - * D28IP_P1IP Slot? INTA -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - * D26IP_E2P EHCI2 INTA -> PIRQA - * D25IP_LIP ETH0 INTA -> PIRQE (MSI) - * D22IP_KTIP MEI NOINT - * D22IP_IDERIP MEI NOINT - * D22IP_MEI2IP MEI NOINT - * D22IP_MEI1IP MEI NOINT - * D20IP_XHCIIP XHCI INTA -> PIRQA (MSI) - * GFX INTA -> PIRQA (MSI) - * PEGx16 INTA -> PIRQA - * INTB -> PIRQB - * INTC -> PIRQC - * INTD -> PIRQD - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP) | (INTD << D28IP_P4IP) | - (INTA << D28IP_P5IP) | (INTB << D28IP_P6IP) | - (INTC << D28IP_P7IP) | (INTD << D28IP_P8IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (INTA << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - RCBA32(D20IP) = (INTA << D20IP_XHCIIP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); - DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); - DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D26IR, PIRQA, PIRQF, PIRQC, PIRQD); - DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); - DIR_ROUTE(D20IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_ALWAYS; - /* Disable PCI bridge so MRC does not probe this bus */ - reg32 |= PCH_DISABLE_P2P; - RCBA32(FD) = reg32; -} - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void superio_gpio_config(void) -{ - int lvds_3v = 0; // 0 (5V) or 1 (3V3) - int dis_bl_inv = 1; // backlight inversion: 1 = disabled, 0 = enabled - device_t dev = PNP_DEV(0x2e, 0x9); - pnp_enter_ext_func_mode(dev); - pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */ - pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ - pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are - GPIO27, 26, 25, 24 */ - pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32, - Pins 78~85 are UART B */ - pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are - GPIO57~50 */ - pnp_set_logical_device(dev); - /* Values can only be changed, when devices are enabled. */ - pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */ - pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */ - pnp_exit_ext_func_mode(dev); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int boot_mode = 0; - int cbmem_was_initted; - - struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = DEFAULT_MCHBAR, - .dmibar = DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, - .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, - .ec_present = 1, - .gbe_enable = 1, - .ddr3lv_support = 0, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 2, - .dimm_channel1_disabled = 2, - .max_ddr3_freq = 1600, - .usb_port_config = { - /* enabled usb oc pin length */ - { 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */ - { 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */ - { 1, 0, 0x0040 }, /* P2: lower right USB 3.0 (OC0) */ - { 1, 0, 0x0040 }, /* P3: upper right USB 3.0 (OC0) */ - { 1, 0, 0x0040 }, /* P4: lower USB 2.0 (OC0) */ - { 1, 0, 0x0040 }, /* P5: upper USB 2.0 (OC0) */ - { 1, 0, 0x0040 }, /* P6: front panel USB 2.0 (OC0) */ - { 1, 0, 0x0040 }, /* P7: front panel USB 2.0 (OC0) */ - { 1, 4, 0x0040 }, /* P8: internal USB 2.0 (OC4) */ - { 1, 4, 0x0040 }, /* P9: internal USB 2.0 (OC4) */ - { 1, 4, 0x0040 }, /* P10: internal USB 2.0 (OC4) */ - { 1, 4, 0x0040 }, /* P11: internal USB 2.0 (OC4) */ - { 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */ - { 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */ - }, - .usb3 = { - .mode = 3, /* Smart Auto? */ - .hs_port_switch_mask = 0xf, /* All four ports. */ - .preboot_support = 1, /* preOS driver? */ - .xhci_streams = 1, /* Enable. */ - }, - .pcie_init = 1, - }; - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&ktqm77_gpio_map); - superio_gpio_config(); - - /* Initialize console device(s) */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected\n"); - boot_mode = 1; - - /* System is not happy after keyboard reset... */ - printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); - outb(0x6, 0xcf9); - hlt(); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - /* Enable PEG10 (1x16) */ - pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, - pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) | - DEVEN_PEG10); - - boot_mode = southbridge_detect_s3_resume() ? 2 : 0; - - post_code(0x38); - /* Enable SPD ROMs and DDR-III DRAM */ - enable_smbus(); - - /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - - post_code(0x39); - - post_code(0x3a); - pei_data.boot_mode = boot_mode; - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(&pei_data); - - timestamp_add_now(TS_AFTER_INITRAM); - post_code(0x3c); - - rcba_config(); - post_code(0x3d); - - quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - if (boot_mode!=2) - save_mrc_data(&pei_data); - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - hlt(); - } - northbridge_romstage_finalize(boot_mode==2); - - post_code(0x3f); - timestamp_add_now(TS_END_ROMSTAGE); -} diff --git a/src/mainboard/kontron/ktqm77/smihandler.c b/src/mainboard/kontron/ktqm77/smihandler.c deleted file mode 100644 index 18ff68d..0000000 --- a/src/mainboard/kontron/ktqm77/smihandler.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -int mainboard_io_trap_handler(int smif) -{ - printk(BIOS_DEBUG, "mainboard_io_trap_handler: %x\n", smif); - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - smm_get_gnvs()->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - printk(BIOS_DEBUG, "warn: unknown mainboard_smi_gpi: %x\n", gpi_sts); -} - -#define APMC_FINALIZE 0xcb - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - printk(BIOS_DEBUG, "mainboard_smi_apmc: %x\n", apmc); - switch (apmc) { - case APMC_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/kontron/ktqm77/thermal.h b/src/mainboard/kontron/ktqm77/thermal.h deleted file mode 100644 index 4716cef..0000000 --- a/src/mainboard/kontron/ktqm77/thermal.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef KTQM77_THERMAL_H -#define KTQM77_THERMAL_H - -/* Active Thermal and fans are controlled by the EC. */ - - /* Temperature which OS will shutdown at */ - #define CRITICAL_TEMPERATURE 100 - - /* Temperature which OS will throttle CPU */ - #define PASSIVE_TEMPERATURE 90 - -#endif diff --git a/src/mainboard/kontron/ktqm77_mitx/Kconfig b/src/mainboard/kontron/ktqm77_mitx/Kconfig new file mode 100644 index 0000000..6486ff4 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/Kconfig @@ -0,0 +1,78 @@ +if BOARD_KONTRON_KTQM77_MITX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE + select SOUTHBRIDGE_INTEL_C216 + select SUPERIO_WINBOND_W83627DHG + select EC_KONTRON_IT8516E + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select ENABLE_VMX + select HAVE_MRC + +config MAINBOARD_DIR + string + default kontron/ktqm77_mitx + +config MAINBOARD_PART_NUMBER + string + default "KTQM77/mITX" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config VGA_BIOS_FILE + string + default "pci8086,0166.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x0000 # TODO + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x0000 # TODO + +config MAINBOARD_VENDOR + string + default "Kontron" + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config HAVE_GBE_BIN + bool + default n + +config IFD_BIOS_SECTION + string + default "0x00580000:0x007fffff" + +config IFD_ME_SECTION + string + default "0x00003000:0x0057ffff" + +config IFD_GBE_SECTION + string + default "0x00001000:0x00002fff" + +endif # BOARD_KONTRON_KTQM77_MITX diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/ec.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/ec.asl new file mode 100644 index 0000000..7925e0d --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/ec.asl @@ -0,0 +1,7 @@ +#define IT8516E_EC_DEV EC0 +#define SUPERIO_PNP_BASE 0x20e +#define IT8516E_FIRST_DATA 0x62 +#define IT8516E_FIRST_SC 0x66 +#define IT8516E_SECOND_DATA 0x20c +#define IT8516E_SECOND_SC 0x20d +#include <ec/kontron/it8516e/acpi/ec.asl> diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/mainboard.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/mainboard.asl new file mode 100644 index 0000000..10b1c11 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/mainboard.asl @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (_SB) { + Device (PWRB) + { + Name (_HID, EisaId("PNP0C0C")) + } +} diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/platform.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/platform.asl new file mode 100644 index 0000000..ff6d94d --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/platform.asl @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + Return(Package(){0,0}) +} diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/sandybridge_pci_irqs.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..ceb40be --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Ivybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // LPC devices 0:1f.x + // D31IP_TTIP THRT INTC -> PIRQC + Package() { 0x001fffff, 2, 0, 18 },// D31IP_SMIP SMBUS INTC -> PIRQC + Package() { 0x001fffff, 1, 0, 19 },// D31IP_SIP SATA INTB -> PIRQD (MSI) + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 23 },// D29IP_E1P EHCI1 INTA -> PIRQH + // PCIe Root Ports 0:1c.x + // D28IP_P8IP Slot? INTD -> PIRQD + Package() { 0x001cffff, 3, 0, 19 },// D28IP_P4IP ETH2 INTD -> PIRQD (MSI) + // D28IP_P7IP PCIEx1 INTC -> PIRQC + Package() { 0x001cffff, 2, 0, 18 },// D28IP_P3IP ETH1 INTC -> PIRQC (MSI) + // D28IP_P6IP 1394 INTB -> PIRQB (MSI) + Package() { 0x001cffff, 1, 0, 17 },// D28IP_P2IP Slot? INTB -> PIRQB + // D28IP_P5IP GbEPHY INTA -> PIRQA + Package() { 0x001cffff, 0, 0, 16 },// D28IP_P1IP Slot? INTA -> PIRQA + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 22 },// D27IP_ZIP HDA INTA -> PIRQG (MSI) + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 16 },// D26IP_E2P EHCI2 INTA -> PIRQA + // ETH0 0:19.0 + Package() { 0x0019ffff, 0, 0, 20 },// D25IP_LIP ETH0 INTA -> PIRQE (MSI) + // xHCI 0:14.0 + Package() { 0x0014ffff, 0, 0, 16 },// D20IP_XHCIIP xHCI INTA -> PIRQA (MSI) + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // PCIe PEG x16 0:1.0 + Package() { 0x0001ffff, 3, 0, 19 },// PEGx16 INTD -> PIRQD + Package() { 0x0001ffff, 2, 0, 18 },// PEGx16 INTC -> PIRQC + Package() { 0x0001ffff, 1, 0, 17 },// PEGx16 INTB -> PIRQB + Package() { 0x0001ffff, 0, 0, 16 },// PEGx16 INTA -> PIRQA + }) + } Else { + Return (Package() { + // LPC devices 0:1f.x + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // ETH0 0:19.0 + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, + // xHCI 0:14.0 + Package() { 0x0014ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe PEG x16 0:1.0 + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/superio.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/superio.asl new file mode 100644 index 0000000..1ed4c93 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/superio.asl @@ -0,0 +1,12 @@ +#undef SUPERIO_DEV +#undef SUPERIO_PNP_BASE +#undef W83627DHG_SHOW_UARTA +#undef W83627DHG_SHOW_UARTB +#undef W83627DHG_SHOW_KBC +#undef W83627DHG_SHOW_PS2M +#undef W83627DHG_SHOW_HWMON +#define SUPERIO_DEV SIO0 +#define SUPERIO_PNP_BASE 0x2e +#define W83627DHG_SHOW_UARTA 1 +#define W83627DHG_SHOW_UARTB 1 +#include <superio/winbond/w83627dhg/acpi/superio.asl> diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi/thermal.asl b/src/mainboard/kontron/ktqm77_mitx/acpi/thermal.asl new file mode 100644 index 0000000..093151a --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi/thermal.asl @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +// Thermal Zone + +Scope (_TZ) +{ + ThermalZone (THRM) + { + Name (_TC1, 0x02) + Name (_TC2, 0x05) + + // Thermal zone polling frequency: 10 seconds + Name (_TZP, 100) + + // Thermal sampling period for passive cooling: 2 seconds + Name (_TSP, 20) + + // Convert from Degrees C to 1/10 Kelvin for ACPI + Method (CTOK, 1) { + // 10th of Degrees C + Multiply (Arg0, 10, Local0) + + // Convert to Kelvin + Add (Local0, 2732, Local0) + + Return (Local0) + } + + // Threshold for OS to shutdown + Method (_CRT, 0, Serialized) + { + Return (CTOK (\TCRT)) + } + + // Threshold for passive cooling + Method (_PSV, 0, Serialized) + { + Return (CTOK (\TPSV)) + } + + // Processors used for passive cooling + Method (_PSL, 0, Serialized) + { + Return (\PPKG ()) + } + + Method (_TMP, 0, Serialized) + { + // Return CPU Temperature from EC + Return (_SB.PCI0.LPCB.EC0.PM1.CTK ()) + } + +// The EC does all fan control. There is no Active Cooling Fan control (_ACx). + } +} diff --git a/src/mainboard/kontron/ktqm77_mitx/acpi_tables.c b/src/mainboard/kontron/ktqm77_mitx/acpi_tables.c new file mode 100644 index 0000000..0d90403 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/acpi_tables.c @@ -0,0 +1,94 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + /* EC handles all thermal and fan control on Butterfly. */ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 0; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/kontron/ktqm77_mitx/board_info.txt b/src/mainboard/kontron/ktqm77_mitx/board_info.txt new file mode 100644 index 0000000..2e1c3cd --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/board_info.txt @@ -0,0 +1 @@ +Category: mini diff --git a/src/mainboard/kontron/ktqm77_mitx/cmos.layout b/src/mainboard/kontron/ktqm77_mitx/cmos.layout new file mode 100644 index 0000000..621d958 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/cmos.layout @@ -0,0 +1,181 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +401 3 e 12 gfx_uma_size + +#404 4 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +411 1 e 11 sata_mode +#412 4 r 0 unused + +# coreboot config options: additional mainboard options +416 4 e 10 systemp_type +420 7 h 0 fan1_min +427 7 h 0 fan1_max +434 7 h 0 fan2_min +441 7 h 0 fan2_max + +# coreboot config options: bootloader +448 64 r 0 write_protected_by_bios +512 328 s 0 boot_devices +840 8 h 0 boot_default +848 1 e 9 cmos_defaults_loaded +849 1 e 2 ethernet1 +850 1 e 2 ethernet2 +#851 5 r 0 unused + +# coreboot config options: mainboard specific options +856 2 e 8 fan1_mode +858 2 r 0 fan1_reserved +860 2 e 8 fan2_mode +862 2 r 0 fan2_reserved +864 16 h 0 fan1_target +880 16 h 0 fan2_target + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Auto +8 1 PWM +8 2 Speed +8 3 Thermal +9 0 No +9 1 Yes +10 0 None +10 1 AMD +10 2 LM75@90 +10 3 GPIO16 +10 4 LM75@9e +11 0 AHCI +11 1 Compatible +12 0 32M +12 1 64M +12 2 96M +12 3 128M +12 4 160M +12 5 192M +12 6 224M + +# ----------------------------------------------------------------- +checksums + +checksum 392 895 984 diff --git a/src/mainboard/kontron/ktqm77_mitx/devicetree.cb b/src/mainboard/kontron/ktqm77_mitx/devicetree.cb new file mode 100644 index 0000000..f6390ac --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/devicetree.cb @@ -0,0 +1,161 @@ +chip northbridge/intel/sandybridge + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" # TODO: This is never read. + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "0" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "4" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "0" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 on end # PCIe Bridge x16 + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8b" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x8b" + register "pirqf_routing" = "0x8b" + register "pirqg_routing" = "0x8b" + register "pirqh_routing" = "0x8b" + + # Enable all SATA ports 0-5 + register "sata_port_map" = "0x3f" + # Set max SATA speed to 6.0 Gb/s (should be the default, anyway) + register "sata_interface_speed_support" = "0x3" + + # TODO: Enable generic LPC decodes... + register "gen1_dec" = "0x001c02e1" + #register "gen2_dec" = "0x00000000" + #register "gen3_dec" = "0x00000000" + #register "gen4_dec" = "0x00000000" + + # Disable root port coalescing + register "pcie_port_coalesce" = "0" + + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + + # Disabling 1c.0 might break IRQ settings as it enables port coalescing + # There are two mini PCIe x1 sockets, so one PCIe port is unrouted + device pci 1c.0 on end # PCIe Port #1 mini PCIe x1? + device pci 1c.1 on end # PCIe Port #2 mini PCIe x1? + device pci 1c.2 on end # PCIe Port #3 second Ethernet NIC + device pci 1c.3 on end # PCIe Port #4 third Ethernet NIC + device pci 1c.4 on end # PCIe Port #5 first Ethernet PHY + device pci 1c.5 on end # PCIe Port #6 FireWire + device pci 1c.6 on end # PCIe Port #7 PCIe x1 + device pci 1c.7 on end # PCIe Port #8 mini PCIe x1? + + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on #LPC bridge + chip superio/winbond/w83627dhg + device pnp 2e.0 off # Floppy + end + device pnp 2e.1 off # Parallel Port + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 off # Keyboard + end + device pnp 2e.6 off # SPI + end + device pnp 2e.307 off # GPIO 1 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 on # GPIO2 -- original firmware sets this on + end + device pnp 2e.109 on # GPIO3 -- original firmware sets this on + end + device pnp 2e.209 off # GPIO4 + end + device pnp 2e.309 off # GPIO5 + end + device pnp 2e.a off # ACPI + end + device pnp 2e.b off # HWM + end + device pnp 2e.c off # PECI, SST + end + end #superio/winbond/w83627dhg + chip ec/kontron/it8516e + # Set CPU Fan to 50°C, System Fan to 75% + register "default_fan_mode" = "{ IT8516E_MODE_THERMAL, IT8516E_MODE_PWM }" + register "default_fan_target" = "{ 50, 75 }" + + # TODO: Check status when Linux runs + device pnp 20e.1 on # Com3 + io 0x60 = 0x03e8 + irq 0x70 = 4 + end + device pnp 20e.2 on # Com4 + io 0x60 = 0x02e8 + irq 0x70 = 3 + end + device pnp 20e.4 off # System Wakeup + end + device pnp 20e.5 on # Mouse + irq 0x70 = 12 + end + device pnp 20e.6 on # Keyboard + io 0x60 = 0x0060 + io 0x62 = 0x0064 + irq 0x70 = 1 + end + device pnp 20e.f off # Shared Memory + end + device pnp 20e.10 off # BRAM / RTC + end + device pnp 20e.11 on # PM channel 1 + io 0x60 = 0x0062 + io 0x62 = 0x0066 + irq 0x70 = 0 + end + device pnp 20e.12 on # PM channel 2 + io 0x60 = 0x020c + io 0x62 = 0x020d + irq 0x70 = 0 + end + device pnp 20e.17 off # PM channel 3 + end + end #ec/kontron/it8516e + # TODO: TPM on 4e + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/kontron/ktqm77_mitx/dsdt.asl b/src/mainboard/kontron/ktqm77_mitx/dsdt.asl new file mode 100644 index 0000000..3af7a0e --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/dsdt.asl @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + #include "acpi/mainboard.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include "acpi/thermal.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/kontron/ktqm77_mitx/fadt.c b/src/mainboard/kontron/ktqm77_mitx/fadt.c new file mode 100644 index 0000000..b8da1be --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/fadt.c @@ -0,0 +1,169 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ +#define APM_CNT 0xb2 +#define CST_CONTROL 0x85 +#define PST_CONTROL 0x80 +#define ACPI_DISABLE 0x1e +#define ACPI_ENABLE 0xe1 +#define GNVS_UPDATE 0xea + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = ACPI_ENABLE; + fadt->acpi_disable = ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 64; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/kontron/ktqm77_mitx/gpio.h b/src/mainboard/kontron/ktqm77_mitx/gpio.h new file mode 100644 index 0000000..f99e028 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/gpio.h @@ -0,0 +1,303 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef KTQM77_GPIO_H +#define KTQM77_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +/* + * TODO: Investigate somehow... Current values are taken from a running + * system with vendor supplied firmware. + */ + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio1 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio2 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio3 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio4 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio5 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio6 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio7 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio8 = GPIO_MODE_GPIO, /* Unknown Output LOW*/ + .gpio9 = GPIO_MODE_NATIVE, /* Native - OC5# pin */ + .gpio10 = GPIO_MODE_NATIVE, /* Native - OC6# pin */ + .gpio11 = GPIO_MODE_NATIVE, /* Native - SMBALERT# pin */ + .gpio12 = GPIO_MODE_NATIVE, /* Native - LAN_PHY_PWR_CTRL */ + .gpio13 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio14 = GPIO_MODE_NATIVE, /* Native - OC7# pin */ + .gpio15 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio16 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio17 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio18 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ1# LAN clock pin */ + .gpio19 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio20 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio21 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio22 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio23 = GPIO_MODE_NATIVE, /* Native - LDRQ1# pin */ + .gpio24 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio25 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio26 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ4# pin */ + .gpio27 = GPIO_MODE_GPIO, /* Unknown Input */ /* Vendor supplied DSDT sets this conditionally + when going to suspend (S3, S4, S5). */ + .gpio28 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio29 = GPIO_MODE_NATIVE, /* Native - SLP_LAN# pin, forced by soft strap */ + .gpio30 = GPIO_MODE_NATIVE, /* Native - SUSWARN_EC# pin */ + .gpio31 = GPIO_MODE_NATIVE /* Native - ACPRESENT */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio1 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio2 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio3 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio4 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio5 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio6 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio7 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio8 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio9 = GPIO_DIR_INPUT, /* Native */ + .gpio10 = GPIO_DIR_INPUT, /* Native */ + .gpio11 = GPIO_DIR_INPUT, /* Native */ + .gpio12 = GPIO_DIR_INPUT, /* Native */ + .gpio13 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio14 = GPIO_DIR_INPUT, /* Native */ + .gpio15 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio16 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio17 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio18 = GPIO_DIR_INPUT, /* Native */ + .gpio19 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio20 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio21 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio22 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio23 = GPIO_DIR_INPUT, /* Native */ + .gpio24 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio25 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio26 = GPIO_DIR_INPUT, /* Native */ + .gpio27 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio28 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio29 = GPIO_DIR_INPUT, /* Native */ + .gpio30 = GPIO_DIR_INPUT, /* Native */ + .gpio31 = GPIO_DIR_INPUT, /* Native */ +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio1 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio2 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio3 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio4 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio5 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio6 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio7 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio8 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio9 = GPIO_LEVEL_LOW, /* Native */ + .gpio10 = GPIO_LEVEL_LOW, /* Native */ + .gpio11 = GPIO_LEVEL_LOW, /* Native */ + .gpio12 = GPIO_LEVEL_LOW, /* Native */ + .gpio13 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio14 = GPIO_LEVEL_LOW, /* Native */ + .gpio15 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio16 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio17 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio18 = GPIO_LEVEL_LOW, /* Native */ + .gpio19 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio20 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio21 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio22 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio23 = GPIO_LEVEL_LOW, /* Native */ + .gpio24 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio25 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio26 = GPIO_LEVEL_LOW, /* Native */ + .gpio27 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio28 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio29 = GPIO_LEVEL_LOW, /* Native */ + .gpio30 = GPIO_LEVEL_LOW, /* Native */ + .gpio31 = GPIO_LEVEL_LOW, /* Native */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, /* Native - CLKRUN# pin */ + .gpio33 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio34 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio35 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio36 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio37 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio38 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio39 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio40 = GPIO_MODE_NATIVE, /* Native - OC1# pin */ + .gpio41 = GPIO_MODE_NATIVE, /* Native - OC2# pin */ + .gpio42 = GPIO_MODE_NATIVE, /* Native - OC3# pin */ + .gpio43 = GPIO_MODE_NATIVE, /* Native - OC4# pin */ + .gpio44 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ5# pin */ + .gpio45 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ6# pin */ + .gpio46 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ7# pin */ + .gpio47 = GPIO_MODE_NATIVE, /* Native - PEG_A_CLKRQ# pin */ + .gpio48 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio49 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio50 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio51 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio52 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio53 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio54 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio55 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio56 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio57 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio58 = GPIO_MODE_NATIVE, /* Native - SML1CLK */ + .gpio59 = GPIO_MODE_NATIVE, /* Native - OC0# pin */ + .gpio60 = GPIO_MODE_GPIO, /* Unknown Output HIGH */ + .gpio61 = GPIO_MODE_NATIVE, /* Native - SUS_STAT# pin*/ + .gpio62 = GPIO_MODE_NATIVE, /* Native - SUSCLK */ + .gpio63 = GPIO_MODE_NATIVE, /* Native - SLP_S5# */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, /* Native */ + .gpio33 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio34 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio35 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio36 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio37 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio38 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio39 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio40 = GPIO_DIR_INPUT, /* Native */ + .gpio41 = GPIO_DIR_INPUT, /* Native */ + .gpio42 = GPIO_DIR_INPUT, /* Native */ + .gpio43 = GPIO_DIR_INPUT, /* Native */ + .gpio44 = GPIO_DIR_INPUT, /* Native */ + .gpio45 = GPIO_DIR_INPUT, /* Native */ + .gpio46 = GPIO_DIR_INPUT, /* Native */ + .gpio47 = GPIO_DIR_INPUT, /* Native */ + .gpio48 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio49 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio50 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio51 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio52 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio53 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio54 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio55 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio56 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio57 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio58 = GPIO_DIR_INPUT, /* Native */ + .gpio59 = GPIO_DIR_INPUT, /* Native */ + .gpio60 = GPIO_DIR_OUTPUT, /* Unknown Output HIGH */ + .gpio61 = GPIO_DIR_INPUT, /* Native */ + .gpio62 = GPIO_DIR_INPUT, /* Native */ + .gpio63 = GPIO_DIR_INPUT, /* Native */ +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_LOW, /* Native */ + .gpio33 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio34 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio35 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio36 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio37 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio38 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio39 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio40 = GPIO_LEVEL_LOW, /* Native */ + .gpio41 = GPIO_LEVEL_LOW, /* Native */ + .gpio42 = GPIO_LEVEL_LOW, /* Native */ + .gpio43 = GPIO_LEVEL_LOW, /* Native */ + .gpio44 = GPIO_LEVEL_LOW, /* Native */ + .gpio45 = GPIO_LEVEL_LOW, /* Native */ + .gpio46 = GPIO_LEVEL_LOW, /* Native */ + .gpio47 = GPIO_LEVEL_LOW, /* Native */ + .gpio48 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio49 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio50 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio51 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio52 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio53 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio54 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio55 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio56 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio57 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio58 = GPIO_LEVEL_LOW, /* Native */ + .gpio59 = GPIO_LEVEL_LOW, /* Native */ + .gpio60 = GPIO_LEVEL_HIGH, /* Unknown Output HIGH */ + .gpio61 = GPIO_LEVEL_LOW, /* Native */ + .gpio62 = GPIO_LEVEL_LOW, /* Native */ + .gpio63 = GPIO_LEVEL_LOW, /* Native */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio65 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio66 = GPIO_MODE_GPIO, /* Unknown Output LOW */ + .gpio67 = GPIO_MODE_NATIVE, /* Native - CLKOUTFLEX3 */ + .gpio68 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio69 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio70 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio71 = GPIO_MODE_GPIO, /* Unknown Input */ + .gpio72 = GPIO_MODE_NATIVE, /* Native - nothing on mobile */ + .gpio73 = GPIO_MODE_NATIVE, /* Native - PCIECLKRQ0# pin */ + .gpio74 = GPIO_MODE_NATIVE, /* Native - SML1ALERT#/PCHHOT# pin */ + .gpio75 = GPIO_MODE_NATIVE, /* Native - SML1DATA */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio65 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio66 = GPIO_DIR_OUTPUT, /* Unknown Output LOW */ + .gpio67 = GPIO_DIR_INPUT, /* Native */ + .gpio68 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio69 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio70 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio71 = GPIO_DIR_INPUT, /* Unknown Input */ + .gpio72 = GPIO_DIR_INPUT, /* Native */ + .gpio73 = GPIO_DIR_INPUT, /* Native */ + .gpio74 = GPIO_DIR_INPUT, /* Native */ + .gpio75 = GPIO_DIR_INPUT, /* Native */ +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio65 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio66 = GPIO_LEVEL_LOW, /* Unknown Output LOW */ + .gpio67 = GPIO_LEVEL_LOW, /* Native */ + .gpio68 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio69 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio70 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio71 = GPIO_LEVEL_LOW, /* Unknown Input */ + .gpio72 = GPIO_LEVEL_LOW, /* Native */ + .gpio73 = GPIO_LEVEL_LOW, /* Native */ + .gpio74 = GPIO_LEVEL_LOW, /* Native */ + .gpio75 = GPIO_LEVEL_LOW, /* Native */ +}; + +const struct pch_gpio_map ktqm77_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/kontron/ktqm77_mitx/hda_verb.c b/src/mainboard/kontron/ktqm77_mitx/hda_verb.c new file mode 100644 index 0000000..c957c25 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/hda_verb.c @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 secunet Security Networks AG + * Copyright (C) 2013 Nico Huber nico.h@gmx.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x11060397, // Codec Vendor / Device ID: Via VT1708S + 0x11060000, // Subsystem ID + 0x0000000c, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x11060000 */ + AZALIA_SUBVENDOR(0x0, 0x11060000), + + /* Pin Widget Verb Table */ + + /* + * NID 0x19 [Port A (SURR)]: + * Jack Internal Speaker N/A Black + */ + AZALIA_PIN_CFG(0, 0x19, 0x10101112), + + /* + * NID 0x1a [Port B (MIC1/2)]: + * Jack Rear Mic In 1/8" Pink + */ + AZALIA_PIN_CFG(0, 0x1a, 0x01a19036), + + /* + * NID 0x1b [Port C (LINEIN)]: + * Jack Rear Line In 1/8" Blue + */ + AZALIA_PIN_CFG(0, 0x1b, 0x0181303e), + + /* + * NID 0x1c [Port D (Front)]: + * Jack Rear Line Out 1/8" Green + */ + AZALIA_PIN_CFG(0, 0x1c, 0x01014010), + + /* + * NID 0x1d [Port E (Front HP/MIC)]: + * Jack Front HP Out 1/8" Green + */ + AZALIA_PIN_CFG(0, 0x1d, 0x022141f0), + + /* + * NID 0x1e [Port F (Front HP/MIC)]: + * Jack Front Mic In 1/8" Pink + */ + AZALIA_PIN_CFG(0, 0x1e, 0x02a19138), + + /* + * NID 0x1f [CD]: + * Jack Int.(ATAPI) CD ATAPI internal Black + */ + AZALIA_PIN_CFG(0, 0x1f, 0x19331137), + + /* + * NID 0x20 [N/A]: + * Jack Rear S/PDIF Out RCA Unknown + */ + AZALIA_PIN_CFG(0, 0x20, 0x014401f0), + + /* + * NID 0x21 [N/A]: + * None Internal S/PDIF Out Other Digital Unknown + */ + AZALIA_PIN_CFG(0, 0x21, 0x504600f0), + + /* + * NID 0x22 [Port G (C/LFE)]: + * Jack Internal Speaker Unknown Orange + */ + AZALIA_PIN_CFG(0, 0x22, 0x10106111), + + /* + * NID 0x23 [Port H (SSL/SSR)]: + * Jack Internal Speaker Unknown Grey + */ + AZALIA_PIN_CFG(0, 0x23, 0x10102114), + + + /* coreboot specific header */ + 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of jacks + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x0, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x58560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/kontron/ktqm77_mitx/mainboard.c b/src/mainboard/kontron/ktqm77_mitx/mainboard.c new file mode 100644 index 0000000..715ec56 --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/mainboard.c @@ -0,0 +1,202 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#if CONFIG_VGA_ROM_RUN +#include <x86emu/x86emu.h> +#endif +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + +#if CONFIG_VGA_ROM_RUN +static int int15_handler(void) +{ + int res = 0; + + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, X86_AX, X86_BX, X86_CX, X86_DX); + + switch(X86_EAX & 0xffff) { + case 0x5f34: + /* + * Set Panel Fitting Hook: + * bit 2 = Graphics Stretching + * bit 1 = Text Stretching + * bit 0 = Centering (do not set with bit1 or bit2) + * 0 = video bios default + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffffff00; + X86_ECX |= 0x00; /* Use video bios default */ + res = 1; + break; + case 0x5f35: + /* + * Boot Display Device Hook: + * bit 0 = CRT + * bit 1 = TV (eDP) + * bit 2 = EFP + * bit 3 = LFP + * bit 4 = CRT2 + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 + * bit 7 = LFP2 + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; /* Use video bios default */ + res = 1; + break; + case 0x5f51: + /* + * Hook to select active LFP configuration: + * 00h = No LVDS, VBIOS does not enable LVDS + * 01h = Int-LVDS, LFP driven by integrated LVDS decoder + * 02h = SDVO-LVDS, LFP driven by SDVO decoder + * 03h = eDP, LFP Driven by Int-DisplayPort encoder + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0000; /* TODO: Make this configurable in NVRAM? */ + res = 1; + break; + case 0x5f40: + /* + * Boot Panel Type Hook: + * BL(in): 00h = LFP, 01h = LFP2 + * CL(out): panel type id in table: 1..16 + */ + if (0 == (X86_EBX & 0xff)) { + X86_EAX &= 0xffff0000; + X86_EAX |= 0x015f; + res = 1; + } else if (1 == (X86_EBX & 0xff)) { + X86_EAX &= 0xffff0000; + X86_EAX |= 0x015f; + res = 1; + } else { + printk(BIOS_DEBUG, + "Unknown panel index %u " + "in INT15 function %04x!\n", + X86_EBX & 0xff, X86_EAX & 0xffff); + } + break; + case 0x5f52: + /* + * Panel Color Depth: + * 00h = 18 bit + * 01h = 24 bit + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x005f; + X86_ECX &= 0xffff0000; + X86_ECX |= 0x0001; + res = 1; + break; + case 0x5f14: + if ((X86_EBX & 0xffff) == 0x78f) { + /* + * Get Miscellaneous Status Hook: + * bit 2: AC power active? + * bit 1: lid closed? + * bit 0: docked? + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x015f; + res = 1; + } else { + printk(BIOS_DEBUG, + "Unknown BX 0x%04x in INT15 function %04x!\n", + X86_EBX & 0xffff, X86_EAX & 0xffff); + } + break; + case 0x5f49: + /* + * Get Inverter Type and Polarity: + * EBX: backlight control brightness: 0..255 + * ECX: + * 0 = Enable PWM inverted, 2 = Enable PWM + * 1 = Enable I2C inverted, 3 = Enable I2C + */ + X86_EAX &= 0xffff0000; + X86_EAX |= 0x015f; + res = 1; + break; + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + X86_EAX & 0xffff); + break; + } + return res; +} +#endif + + + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE + /* Install custom int15 handler for VGA OPROM */ + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif + + unsigned disable = 0; + if ((get_option(&disable, "ethernet1") == CB_SUCCESS) && disable) { + device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2)); + if (nic) { + printk(BIOS_DEBUG, "DISABLE FIRST NIC!\n"); + nic->enabled = 0; + } + } + disable = 0; + if ((get_option(&disable, "ethernet2") == CB_SUCCESS) && disable) { + device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3)); + if (nic) { + printk(BIOS_DEBUG, "DISABLE SECOND NIC!\n"); + nic->enabled = 0; + } + } +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/kontron/ktqm77_mitx/romstage.c b/src/mainboard/kontron/ktqm77_mitx/romstage.c new file mode 100644 index 0000000..401314c --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/romstage.c @@ -0,0 +1,302 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/bist.h> +#include <cpu/x86/msr.h> +#include "gpio.h" + +static void pch_enable_lpc(void) +{ + /* Set COM3/COM1 decode ranges: 0x3e8/0x3f8 */ + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0070); + + /* Enable KBC on 0x06/0x64 (KBC), + * EC on 0x62/0x66 (MC), + * EC on 0x20c-0x20f (GAMEH), + * Super I/O on 0x2e/0x2f (CNF1), + * COM1/COM3 decode ranges. */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + KBC_LPC_EN | MC_LPC_EN | + CNF1_LPC_EN | GAMEH_LPC_EN | + COMA_LPC_EN | COMB_LPC_EN); +} + +static void rcba_config(void) +{ + u32 reg32; + + /* + * D31IP_TTIP THRT INTC -> PIRQC + * D31IP_SIP2 SATA2 NOINT + * D31IP_SMIP SMBUS INTC -> PIRQC + * D31IP_SIP SATA INTB -> PIRQD (MSI) + * D29IP_E1P EHCI1 INTA -> PIRQH + * D28IP_P8IP Slot? INTD -> PIRQD + * D28IP_P7IP PCIEx1 INTC -> PIRQC + * D28IP_P6IP 1394 INTB -> PIRQB (MSI) + * D28IP_P5IP GbEPHY INTA -> PIRQA + * D28IP_P4IP ETH2 INTD -> PIRQD (MSI) + * D28IP_P3IP ETH1 INTC -> PIRQC (MSI) + * D28IP_P2IP Slot? INTB -> PIRQB + * D28IP_P1IP Slot? INTA -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQG (MSI) + * D26IP_E2P EHCI2 INTA -> PIRQA + * D25IP_LIP ETH0 INTA -> PIRQE (MSI) + * D22IP_KTIP MEI NOINT + * D22IP_IDERIP MEI NOINT + * D22IP_MEI2IP MEI NOINT + * D22IP_MEI1IP MEI NOINT + * D20IP_XHCIIP XHCI INTA -> PIRQA (MSI) + * GFX INTA -> PIRQA (MSI) + * PEGx16 INTA -> PIRQA + * INTB -> PIRQB + * INTC -> PIRQC + * INTD -> PIRQD + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP) | (INTD << D28IP_P4IP) | + (INTA << D28IP_P5IP) | (INTB << D28IP_P6IP) | + (INTC << D28IP_P7IP) | (INTD << D28IP_P8IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (INTA << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + RCBA32(D20IP) = (INTA << D20IP_XHCIIP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); + DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); + DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D26IR, PIRQA, PIRQF, PIRQC, PIRQD); + DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); + DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); + DIR_ROUTE(D20IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + reg32 = RCBA32(FD); + reg32 |= PCH_DISABLE_ALWAYS; + /* Disable PCI bridge so MRC does not probe this bus */ + reg32 |= PCH_DISABLE_P2P; + RCBA32(FD) = reg32; +} + +static void pnp_enter_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0x87, port); + outb(0x87, port); +} + +static void pnp_exit_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0xaa, port); +} + +static void superio_gpio_config(void) +{ + int lvds_3v = 0; // 0 (5V) or 1 (3V3) + int dis_bl_inv = 1; // backlight inversion: 1 = disabled, 0 = enabled + device_t dev = PNP_DEV(0x2e, 0x9); + pnp_enter_ext_func_mode(dev); + pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */ + pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ + pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are + GPIO27, 26, 25, 24 */ + pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32, + Pins 78~85 are UART B */ + pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are + GPIO57~50 */ + pnp_set_logical_device(dev); + /* Values can only be changed, when devices are enabled. */ + pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */ + pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */ + pnp_exit_ext_func_mode(dev); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int boot_mode = 0; + int cbmem_was_initted; + + struct pei_data pei_data = { + .pei_version = PEI_VERSION, + .mchbar = DEFAULT_MCHBAR, + .dmibar = DEFAULT_DMIBAR, + .epbar = DEFAULT_EPBAR, + .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, + .smbusbar = SMBUS_IO_BASE, + .wdbbar = 0x4000000, + .wdbsize = 0x1000, + .hpet_address = CONFIG_HPET_ADDRESS, + .rcba = DEFAULT_RCBABASE, + .pmbase = DEFAULT_PMBASE, + .gpiobase = DEFAULT_GPIOBASE, + .thermalbase = 0xfed08000, + .system_type = 0, // 0 Mobile, 1 Desktop/Server + .tseg_size = CONFIG_SMM_TSEG_SIZE, + .spd_addresses = { 0xA0, 0x00,0xA4,0x00 }, + .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, + .ec_present = 1, + .gbe_enable = 1, + .ddr3lv_support = 0, + // 0 = leave channel enabled + // 1 = disable dimm 0 on channel + // 2 = disable dimm 1 on channel + // 3 = disable dimm 0+1 on channel + .dimm_channel0_disabled = 2, + .dimm_channel1_disabled = 2, + .max_ddr3_freq = 1600, + .usb_port_config = { + /* enabled usb oc pin length */ + { 1, 0, 0x0040 }, /* P0: lower left USB 3.0 (OC0) */ + { 1, 0, 0x0040 }, /* P1: upper left USB 3.0 (OC0) */ + { 1, 0, 0x0040 }, /* P2: lower right USB 3.0 (OC0) */ + { 1, 0, 0x0040 }, /* P3: upper right USB 3.0 (OC0) */ + { 1, 0, 0x0040 }, /* P4: lower USB 2.0 (OC0) */ + { 1, 0, 0x0040 }, /* P5: upper USB 2.0 (OC0) */ + { 1, 0, 0x0040 }, /* P6: front panel USB 2.0 (OC0) */ + { 1, 0, 0x0040 }, /* P7: front panel USB 2.0 (OC0) */ + { 1, 4, 0x0040 }, /* P8: internal USB 2.0 (OC4) */ + { 1, 4, 0x0040 }, /* P9: internal USB 2.0 (OC4) */ + { 1, 4, 0x0040 }, /* P10: internal USB 2.0 (OC4) */ + { 1, 4, 0x0040 }, /* P11: internal USB 2.0 (OC4) */ + { 1, 4, 0x0040 }, /* P12: internal USB 2.0 (OC4) */ + { 1, 4, 0x0040 }, /* P13: internal USB 2.0 (OC4) */ + }, + .usb3 = { + .mode = 3, /* Smart Auto? */ + .hs_port_switch_mask = 0xf, /* All four ports. */ + .preboot_support = 1, /* preOS driver? */ + .xhci_streams = 1, /* Enable. */ + }, + .pcie_init = 1, + }; + + timestamp_init(get_initial_timestamp()); + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + setup_pch_gpios(&ktqm77_gpio_map); + superio_gpio_config(); + + /* Initialize console device(s) */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected\n"); + boot_mode = 1; + + /* System is not happy after keyboard reset... */ + printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); + outb(0x6, 0xcf9); + hlt(); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + sandybridge_early_initialization(SANDYBRIDGE_MOBILE); + printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); + + /* Enable PEG10 (1x16) */ + pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, + pci_read_config32(PCI_DEV(0, 0, 0), DEVEN) | + DEVEN_PEG10); + + boot_mode = southbridge_detect_s3_resume() ? 2 : 0; + + post_code(0x38); + /* Enable SPD ROMs and DDR-III DRAM */ + enable_smbus(); + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == 2) + enable_usb_bar(); + + post_code(0x39); + + post_code(0x3a); + pei_data.boot_mode = boot_mode; + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(&pei_data); + + timestamp_add_now(TS_AFTER_INITRAM); + post_code(0x3c); + + rcba_config(); + post_code(0x3d); + + quick_ram_check(); + post_code(0x3e); + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + if (boot_mode!=2) + save_mrc_data(&pei_data); + + if (boot_mode==2 && !cbmem_was_initted) { + /* Failed S3 resume, reset to come up cleanly */ + outb(0x6, 0xcf9); + hlt(); + } + northbridge_romstage_finalize(boot_mode==2); + + post_code(0x3f); + timestamp_add_now(TS_END_ROMSTAGE); +} diff --git a/src/mainboard/kontron/ktqm77_mitx/smihandler.c b/src/mainboard/kontron/ktqm77_mitx/smihandler.c new file mode 100644 index 0000000..18ff68d --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/smihandler.c @@ -0,0 +1,80 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +int mainboard_io_trap_handler(int smif) +{ + printk(BIOS_DEBUG, "mainboard_io_trap_handler: %x\n", smif); + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + smm_get_gnvs()->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + printk(BIOS_DEBUG, "warn: unknown mainboard_smi_gpi: %x\n", gpi_sts); +} + +#define APMC_FINALIZE 0xcb + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 apmc) +{ + printk(BIOS_DEBUG, "mainboard_smi_apmc: %x\n", apmc); + switch (apmc) { + case APMC_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + } + return 0; +} diff --git a/src/mainboard/kontron/ktqm77_mitx/thermal.h b/src/mainboard/kontron/ktqm77_mitx/thermal.h new file mode 100644 index 0000000..4716cef --- /dev/null +++ b/src/mainboard/kontron/ktqm77_mitx/thermal.h @@ -0,0 +1,31 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef KTQM77_THERMAL_H +#define KTQM77_THERMAL_H + +/* Active Thermal and fans are controlled by the EC. */ + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif diff --git a/src/mainboard/lanner/Kconfig b/src/mainboard/lanner/Kconfig index 842c4f0..cd72aae 100644 --- a/src/mainboard/lanner/Kconfig +++ b/src/mainboard/lanner/Kconfig @@ -3,12 +3,12 @@ if VENDOR_LANNER choice prompt "Mainboard model"
-config BOARD_LANNER_EM8510 +config BOARD_LANNER_EM_8510 bool "EM-8510"
endchoice
-source "src/mainboard/lanner/em8510/Kconfig" +source "src/mainboard/lanner/em_8510/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/lanner/em8510/Kconfig b/src/mainboard/lanner/em8510/Kconfig deleted file mode 100644 index e042e81..0000000 --- a/src/mainboard/lanner/em8510/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -if BOARD_LANNER_EM8510 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA479M - select NORTHBRIDGE_INTEL_I855 - select SOUTHBRIDGE_INTEL_I82801DX - select SUPERIO_WINBOND_W83627THG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default lanner/em8510 - -config MAINBOARD_PART_NUMBER - string - default "EM-8510" - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config IRQ_SLOT_COUNT - int - default 10 - -endif # BOARD_LANNER_EM8510 diff --git a/src/mainboard/lanner/em8510/board_info.txt b/src/mainboard/lanner/em8510/board_info.txt deleted file mode 100644 index 31cf750..0000000 --- a/src/mainboard/lanner/em8510/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: desktop diff --git a/src/mainboard/lanner/em8510/cmos.layout b/src/mainboard/lanner/em8510/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/lanner/em8510/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/lanner/em8510/devicetree.cb b/src/mainboard/lanner/em8510/devicetree.cb deleted file mode 100644 index 257d894..0000000 --- a/src/mainboard/lanner/em8510/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/intel/i855 - device domain 0 on - device pci 0.0 on end - chip southbridge/intel/i82801dx -# pci 11.0 on end -# pci 11.1 on end -# pci 11.2 on end -# pci 11.3 on end -# pci 11.4 on end -# pci 11.5 on end -# pci 11.6 on end -# pci 12.0 on end - register "enable_usb" = "0" - register "enable_native_ide" = "0" - device pci 1f.0 on - chip superio/winbond/w83627thg # link 1 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.7 off end # GAME_MIDI_GIPO1 - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - end - end - end - end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA479M - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lanner/em8510/irq_tables.c b/src/mainboard/lanner/em8510/irq_tables.c deleted file mode 100644 index cfba92c..0000000 --- a/src/mainboard/lanner/em8510/irq_tables.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Travelping GmbH info@travelping.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 10, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0x1e20, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x24cc, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x39, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x01, (0x0f << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x1, 0x0}, - {0x01, (0x0a << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x2, 0x0}, - {0x01, (0x05 << 3) | 0x0, {{0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}}, 0x3, 0x0}, - {0x01, (0x06 << 3) | 0x0, {{0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}}, 0x4, 0x0}, - {0x01, (0x07 << 3) | 0x0, {{0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}}, 0x5, 0x0}, - {0x01, (0x09 << 3) | 0x0, {{0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}}, 0x6, 0x0}, - {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x02 << 3) | 0x0, {{0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x1f << 3) | 0x0, {{0x62, 0xdeb8}, {0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x1d << 3) | 0x0, {{0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x6b, 0xdeb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lanner/em8510/romstage.c b/src/mainboard/lanner/em8510/romstage.c deleted file mode 100644 index 8f0dbf3..0000000 --- a/src/mainboard/lanner/em8510/romstage.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Original take from digital_logic/adl855pc - * - * Copyright (C) 2010 Travelping GmbH info@travelping.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <lib.h> -#include <spd.h> -#include "drivers/pc80/udelay_io.c" -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include "southbridge/intel/i82801dx/i82801dx.h" -#include "northbridge/intel/i855/raminit.h" -#include "northbridge/intel/i855/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include "cpu/x86/bist.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/i855/raminit.c" -#include "northbridge/intel/i855/reset_test.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - if (bist == 0) { -#if 0 - enable_lapic(); - init_timer(); -#endif - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - -#if 0 - print_pci_devices(); -#endif - - if (!bios_reset_detected()) { - enable_smbus(); -#if 1 - dump_spd_registers(); - dump_smbus_registers(); -#endif - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); - } -} diff --git a/src/mainboard/lanner/em_8510/Kconfig b/src/mainboard/lanner/em_8510/Kconfig new file mode 100644 index 0000000..aaf0c37 --- /dev/null +++ b/src/mainboard/lanner/em_8510/Kconfig @@ -0,0 +1,33 @@ +if BOARD_LANNER_EM_8510 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_MPGA479M + select NORTHBRIDGE_INTEL_I855 + select SOUTHBRIDGE_INTEL_I82801DX + select SUPERIO_WINBOND_W83627THG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default lanner/em_8510 + +config MAINBOARD_PART_NUMBER + string + default "EM-8510" + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config IRQ_SLOT_COUNT + int + default 10 + +endif # BOARD_LANNER_EM_8510 diff --git a/src/mainboard/lanner/em_8510/board_info.txt b/src/mainboard/lanner/em_8510/board_info.txt new file mode 100644 index 0000000..31cf750 --- /dev/null +++ b/src/mainboard/lanner/em_8510/board_info.txt @@ -0,0 +1 @@ +Category: desktop diff --git a/src/mainboard/lanner/em_8510/cmos.layout b/src/mainboard/lanner/em_8510/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/lanner/em_8510/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/lanner/em_8510/devicetree.cb b/src/mainboard/lanner/em_8510/devicetree.cb new file mode 100644 index 0000000..257d894 --- /dev/null +++ b/src/mainboard/lanner/em_8510/devicetree.cb @@ -0,0 +1,56 @@ +chip northbridge/intel/i855 + device domain 0 on + device pci 0.0 on end + chip southbridge/intel/i82801dx +# pci 11.0 on end +# pci 11.1 on end +# pci 11.2 on end +# pci 11.3 on end +# pci 11.4 on end +# pci 11.5 on end +# pci 11.6 on end +# pci 12.0 on end + register "enable_usb" = "0" + register "enable_native_ide" = "0" + device pci 1f.0 on + chip superio/winbond/w83627thg # link 1 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + end + end + end + end + device cpu_cluster 0 on + chip cpu/intel/socket_mPGA479M + device lapic 0 on end + end + end +end diff --git a/src/mainboard/lanner/em_8510/irq_tables.c b/src/mainboard/lanner/em_8510/irq_tables.c new file mode 100644 index 0000000..cfba92c --- /dev/null +++ b/src/mainboard/lanner/em_8510/irq_tables.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Travelping GmbH info@travelping.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 10, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0x1e20, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x24cc, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x39, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x01, (0x0f << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x1, 0x0}, + {0x01, (0x0a << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x2, 0x0}, + {0x01, (0x05 << 3) | 0x0, {{0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}}, 0x3, 0x0}, + {0x01, (0x06 << 3) | 0x0, {{0x69, 0xdeb8}, {0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}}, 0x4, 0x0}, + {0x01, (0x07 << 3) | 0x0, {{0x6a, 0xdeb8}, {0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}}, 0x5, 0x0}, + {0x01, (0x09 << 3) | 0x0, {{0x6b, 0xdeb8}, {0x68, 0xdeb8}, {0x69, 0xdeb8}, {0x6a, 0xdeb8}}, 0x6, 0x0}, + {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}, {0x60, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x1f << 3) | 0x0, {{0x62, 0xdeb8}, {0x61, 0xdeb8}, {0x60, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x1d << 3) | 0x0, {{0x60, 0xdeb8}, {0x63, 0xdeb8}, {0x62, 0xdeb8}, {0x6b, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lanner/em_8510/romstage.c b/src/mainboard/lanner/em_8510/romstage.c new file mode 100644 index 0000000..3d06dc1 --- /dev/null +++ b/src/mainboard/lanner/em_8510/romstage.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Original take from digital_logic/smartmodule855 + * + * Copyright (C) 2010 Travelping GmbH info@travelping.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <lib.h> +#include <spd.h> +#include "drivers/pc80/udelay_io.c" +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "northbridge/intel/i855/raminit.h" +#include "northbridge/intel/i855/debug.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627thg/w83627thg.h> +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1) + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/intel/i855/raminit.c" +#include "northbridge/intel/i855/reset_test.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + if (bist == 0) { +#if 0 + enable_lapic(); + init_timer(); +#endif + } + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +#if 0 + print_pci_devices(); +#endif + + if (!bios_reset_detected()) { + enable_smbus(); +#if 1 + dump_spd_registers(); + dump_smbus_registers(); +#endif + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + } +} diff --git a/src/mainboard/lenovo/Kconfig b/src/mainboard/lenovo/Kconfig index d13fa86..eec9aa0 100644 --- a/src/mainboard/lenovo/Kconfig +++ b/src/mainboard/lenovo/Kconfig @@ -3,7 +3,7 @@ if VENDOR_LENOVO choice prompt "Mainboard model"
-config BOARD_LENOVO_X60 +config BOARD_LENOVO_THINKPAD_X60 bool "ThinkPad X60 / X60s / X60t" help The following X60 series ThinkPad machines have been verified to @@ -12,54 +12,54 @@ config BOARD_LENOVO_X60 ThinkPad X60s (Model 1702, 1703) ThinkPad X60 (Model 1709)
-config BOARD_LENOVO_X200 +config BOARD_LENOVO_THINKPAD_X200 bool "ThinkPad X200" help - Lenovo X200 laptop. Consult wiki for details. + Lenovo ThinkPad X200 laptop. Consult wiki for details.
-config BOARD_LENOVO_X201 +config BOARD_LENOVO_THINKPAD_X201 bool "ThinkPad X201 / X201s / X201t" help - Lenovo X201 laptop. Consult wiki for details. + Lenovo ThinkPad X201 laptop. Consult wiki for details.
-config BOARD_LENOVO_X220 +config BOARD_LENOVO_THINKPAD_X220 bool "ThinkPad X220" help - Lenovo X220 laptop. Consult wiki for details. + Lenovo ThinkPad X220 laptop. Consult wiki for details.
-config BOARD_LENOVO_X230 +config BOARD_LENOVO_THINKPAD_X230 bool "ThinkPad X230" help - Lenovo X230 laptop. Consult wiki for details. + Lenovo ThinkPad X230 laptop. Consult wiki for details.
-config BOARD_LENOVO_T520 +config BOARD_LENOVO_THINKPAD_T520 bool "ThinkPad T520" help - Lenovo T520 laptop. Consult wiki for details. + Lenovo ThinkPad T520 laptop. Consult wiki for details.
-config BOARD_LENOVO_T530 +config BOARD_LENOVO_THINKPAD_T530 bool "ThinkPad T530" help - Lenovo T530 laptop. Consult wiki for details. + Lenovo ThinkPad T530 laptop. Consult wiki for details.
-config BOARD_LENOVO_T60 +config BOARD_LENOVO_THINKPAD_T60 bool "ThinkPad T60 / T60p" help - The following T60 series ThinkPad machines have been verified to + The following ThinkPad T60 series ThinkPad machines have been verified to work correctly:
Thinkpad T60p (Model 2007)
endchoice
-source "src/mainboard/lenovo/x60/Kconfig" -source "src/mainboard/lenovo/x200/Kconfig" -source "src/mainboard/lenovo/x201/Kconfig" -source "src/mainboard/lenovo/x220/Kconfig" -source "src/mainboard/lenovo/x230/Kconfig" -source "src/mainboard/lenovo/t520/Kconfig" -source "src/mainboard/lenovo/t530/Kconfig" -source "src/mainboard/lenovo/t60/Kconfig" +source "src/mainboard/lenovo/thinkpad_x60/Kconfig" +source "src/mainboard/lenovo/thinkpad_x200/Kconfig" +source "src/mainboard/lenovo/thinkpad_x201/Kconfig" +source "src/mainboard/lenovo/thinkpad_x220/Kconfig" +source "src/mainboard/lenovo/thinkpad_x230/Kconfig" +source "src/mainboard/lenovo/thinkpad_t520/Kconfig" +source "src/mainboard/lenovo/thinkpad_t530/Kconfig" +source "src/mainboard/lenovo/thinkpad_t60/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/lenovo/t520/Kconfig b/src/mainboard/lenovo/t520/Kconfig deleted file mode 100644 index ae88dc4..0000000 --- a/src/mainboard/lenovo/t520/Kconfig +++ /dev/null @@ -1,80 +0,0 @@ -if BOARD_LENOVO_T520 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_RPGA988B - select NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE - select SOUTHBRIDGE_INTEL_BD82X6X - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select INTEL_INT15 - select EARLY_CBMEM_INIT - select VGA - select INTEL_EDID - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select SANDYBRIDGE_LVDS - - # Workaround for EC/KBC IRQ1. - select SERIRQ_CONTINUOUS_MODE - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -config MAINBOARD_DIR - string - default lenovo/t520 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad T520" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 8 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 10 - -config VGA_BIOS_ID - string - default "8086,0126" - -config VGA_BIOS_FILE - string - default "pci8086,0126.rom" - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x17aa - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x21cf - -endif # BOARD_LENOVO_T520 diff --git a/src/mainboard/lenovo/t520/Makefile.inc b/src/mainboard/lenovo/t520/Makefile.inc deleted file mode 100644 index 265059a..0000000 --- a/src/mainboard/lenovo/t520/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c -romstage-y += gpio.c diff --git a/src/mainboard/lenovo/t520/acpi/ec.asl b/src/mainboard/lenovo/t520/acpi/ec.asl deleted file mode 100644 index 4b3e72c..0000000 --- a/src/mainboard/lenovo/t520/acpi/ec.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> - -Scope(_SB.PCI0.LPCB.EC) -{ -} diff --git a/src/mainboard/lenovo/t520/acpi/gpe.asl b/src/mainboard/lenovo/t520/acpi/gpe.asl deleted file mode 100644 index 80bee71..0000000 --- a/src/mainboard/lenovo/t520/acpi/gpe.asl +++ /dev/null @@ -1,13 +0,0 @@ - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP04.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP04.HPCS) - If (_SB.PCI0.RP04.PDC) - { - Store (0x01, _SB.PCI0.RP04.PDC) - Notify (_SB.PCI0.RP04, 0x00) - } - } - } diff --git a/src/mainboard/lenovo/t520/acpi/platform.asl b/src/mainboard/lenovo/t520/acpi/platform.asl deleted file mode 100644 index f937dc5..0000000 --- a/src/mainboard/lenovo/t520/acpi/platform.asl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* ME may not be up yet. */ - Store (0, _TZ.MEB1) - Store (0, _TZ.MEB2) - - /* Not implemented. */ - Return(Package(){0,0}) -} diff --git a/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index b4b81a2..0000000 --- a/src/mainboard/lenovo/t520/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P2IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P4IP EXC INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P5IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/t520/acpi/superio.asl b/src/mainboard/lenovo/t520/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/lenovo/t520/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/t520/acpi_tables.c b/src/mainboard/lenovo/t520/acpi_tables.c deleted file mode 100644 index 26a459d..0000000 --- a/src/mainboard/lenovo/t520/acpi_tables.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> - -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Disable USB ports in S3 by default */ - gnvs->s3u0 = 0; - gnvs->s3u1 = 0; - - /* Disable USB ports in S5 by default */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - // the lid is open by default. - gnvs->lids = 1; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/t520/board_info.txt b/src/mainboard/lenovo/t520/board_info.txt deleted file mode 100644 index 9b98f05..0000000 --- a/src/mainboard/lenovo/t520/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: WSON-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default deleted file mode 100644 index 137f482..0000000 --- a/src/mainboard/lenovo/t520/cmos.default +++ /dev/null @@ -1,18 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -touchpad=Enable -sata_mode=AHCI -fn_ctrl_swap=Disable -sticky_fn=Disable -trackpoint=Enable -hyper_threading=Enable -backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/t520/cmos.layout b/src/mainboard/lenovo/t520/cmos.layout deleted file mode 100644 index 825317f..0000000 --- a/src/mainboard/lenovo/t520/cmos.layout +++ /dev/null @@ -1,166 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2014 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail - -# coreboot config options: EC -411 1 e 8 first_battery -412 1 e 1 bluetooth -413 1 e 1 wwan -414 1 e 1 touchpad -415 1 e 1 wlan -416 1 e 1 trackpoint -417 1 e 1 fn_ctrl_swap -418 1 e 1 sticky_fn -#419 2 r 0 unused -421 1 e 9 sata_mode -422 2 e 10 backlight - -# coreboot config options: cpu -424 1 e 2 hyper_threading -#425 7 r 0 unused - -# coreboot config options: northbridge -432 3 e 11 gfx_uma_size -#435 549 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 -960 16 r 0 mrc_scrambler_seed_chk - -# coreboot config options: check sums -984 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 Both -10 1 Keyboard only -10 2 Thinklight only -10 3 None -11 0 32M -11 1 64M -11 2 96M -11 3 128M -11 4 160M -11 5 192M -11 6 224M -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb deleted file mode 100644 index c32e237..0000000 --- a/src/mainboard/lenovo/t520/devicetree.cb +++ /dev/null @@ -1,147 +0,0 @@ -chip northbridge/intel/sandybridge - - # Enable DisplayPort Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "5" - register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms - register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms - register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms - register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "1" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "4" - register "gpu_cpu_backlight" = "0x1155" - register "gpu_pch_backlight" = "0x06100610" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA988B - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Coordinate with HW_ALL - register "pstate_coord_type" = "0xfe" - - register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M] - device pci 02.0 on end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "alt_gp_smi_en" = "0x0000" - register "gpi1_routing" = "2" - register "gpi8_routing" = "2" - - # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock) - register "sata_port_map" = "0x1f" - # Set max SATA speed to 6.0 Gb/s - register "sata_interface_speed_support" = "0x3" - - register "gen1_dec" = "0x7c1601" - register "gen2_dec" = "0x0c15e1" - register "gen4_dec" = "0x0c06a1" - - # Enable zero-based linear PCIe root port functions - register "pcie_port_coalesce" = "1" - - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end - device pci 16.2 off end - device pci 16.3 off end - device pci 19.0 on end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 off end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN - device pci 1c.2 off end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 Express Card - device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394 - device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY - device pci 1c.6 off end # PCIe Port #7 USB 3.0 only W520 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1f.0 on #LPC bridge - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa7" - register "config1" = "0x09" - register "config2" = "0xa0" - register "config3" = "0xc2" - - register "beepmask0" = "0x00" - register "beepmask1" = "0x86" - register "has_power_management_beeps" = "0" - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xd0" - register "event5_enable" = "0xfc" - register "event6_enable" = "0x00" - register "event7_enable" = "0x01" - register "event8_enable" = "0x7b" - register "event9_enable" = "0xff" - register "eventa_enable" = "0x01" - register "eventb_enable" = "0x00" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - register "evente_enable" = "0x0d" - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on # SMBUS controller - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end # SMBus - end - end -end diff --git a/src/mainboard/lenovo/t520/dsdt.asl b/src/mainboard/lenovo/t520/dsdt.asl deleted file mode 100644 index b6b4b33..0000000 --- a/src/mainboard/lenovo/t520/dsdt.asl +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP04_IS_EXPRESSCARD 1 -#define EC_LENOVO_H8_ME_WORKAROUND 1 -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/lenovo/t520/fadt.c b/src/mainboard/lenovo/t520/fadt.c deleted file mode 100644 index 27e6303..0000000 --- a/src/mainboard/lenovo/t520/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 101; /* c2 not supported */ - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/lenovo/t520/gpio.c b/src/mainboard/lenovo/t520/gpio.c deleted file mode 100644 index a9b0f9e..0000000 --- a/src/mainboard/lenovo/t520/gpio.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef T520_GPIO_H -#define T520_GPIO_H - -#include "southbridge/intel/bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, // -USB30_SMI - input - .gpio1 = GPIO_MODE_GPIO, // -EC_SCI - input - .gpio2 = GPIO_MODE_GPIO, // -LCD_PRESENCE - input - .gpio3 = GPIO_MODE_GPIO, // DOCKID0 - input - .gpio4 = GPIO_MODE_GPIO, // DOCKID1 - input - .gpio5 = GPIO_MODE_GPIO, // DOCKID2 - input - .gpio6 = GPIO_MODE_GPIO, // SYSTEM_DPCRT_HPD - input - .gpio7 = GPIO_MODE_GPIO, // -eSATA_CD - input - .gpio8 = GPIO_MODE_GPIO, // pulldown - INTEGRATED ENABLED(FCIM) 0 / DISABLED (BTM) 1 - .gpio9 = GPIO_MODE_NATIVE, // OC5 - -USB_PORT9_OC5 - input - .gpio10 = GPIO_MODE_GPIO, // DRAMRST_GATE_ON - output - .gpio11 = GPIO_MODE_NATIVE, // SMBALERT# pullup - .gpio12 = GPIO_MODE_NATIVE, // LANPHYPC - output - .gpio13 = GPIO_MODE_GPIO, // -EC_WAKE - input - .gpio14 = GPIO_MODE_NATIVE, // OC7 - pullup - .gpio15 = GPIO_MODE_GPIO, // pullup - ME CRYPTO STRAP WITH TLS CONFIDENTIALITY - .gpio16 = GPIO_MODE_NATIVE, // SATA4GP - SATA_DOCK_DTCT - input from gpio33 - .gpio17 = GPIO_MODE_GPIO, // DGFX_PW RGD - input - .gpio18 = GPIO_MODE_NATIVE, // PCIECLKRQ1 - -CLKREQ_WLAN_TR - input - .gpio19 = GPIO_MODE_NATIVE, // SATA1GP - SATA_BAY_DTCT - input to gpio22 - .gpio20 = GPIO_MODE_NATIVE, // PCIECLKRQ2 - pullup - .gpio21 = GPIO_MODE_GPIO, // -DISCRETE_GFX_PRESENCE - input - .gpio22 = GPIO_MODE_GPIO, // SATA_BAY_DTCT - output to SATA1GP - .gpio23 = GPIO_MODE_NATIVE, // LDRQ1 - nc - .gpio24 = GPIO_MODE_GPIO, // pullup - .gpio25 = GPIO_MODE_NATIVE, // PCIECLKRQ3 - -CLKREQ_EXC - input - .gpio26 = GPIO_MODE_NATIVE, // PCIECLKRQ4 - -CLKREQ_MCC_TR - input - .gpio27 = GPIO_MODE_GPIO, // -MSATA_DTCT - input - .gpio28 = GPIO_MODE_GPIO, // pullup possible - .gpio29 = GPIO_MODE_GPIO, // SLP_LAN - -PCH_SLP_LAN - output - .gpio30 = GPIO_MODE_NATIVE, // SUSPWRDNACK - output - .gpio31 = GPIO_MODE_NATIVE, // ACPRESENT - input -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_OUTPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_INPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_OUTPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_OUTPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_INPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_HIGH, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_LOW, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio6 = GPIO_LEVEL_LOW, - .gpio7 = GPIO_LEVEL_LOW, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_HIGH, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_LOW, - .gpio16 = GPIO_LEVEL_HIGH, - .gpio17 = GPIO_LEVEL_LOW, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_LOW, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_LOW, - .gpio22 = GPIO_LEVEL_LOW, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio1 = GPIO_INVERT, - .gpio7 = GPIO_INVERT, - .gpio13 = GPIO_INVERT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_blink = { - .gpio18 = GPIO_NO_BLINK, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, // CLKRUN - output - .gpio33 = GPIO_MODE_GPIO, // SATA_DOCK_DTCT - output to SATA4GP - .gpio34 = GPIO_MODE_GPIO, // VRAM_SIZE_ID - input - HIGH: 1GB / LOW: 2GB - .gpio35 = GPIO_MODE_GPIO, // ESATA_DTCT to SATA3GP - .gpio36 = GPIO_MODE_GPIO, // pulldown - .gpio37 = GPIO_MODE_NATIVE, // SATA3GP - ESATA_DTCT to GPIO 34 - .gpio38 = GPIO_MODE_GPIO, // planarid2 - input - .gpio39 = GPIO_MODE_GPIO, // planarid3 - input - .gpio40 = GPIO_MODE_NATIVE, // OC1 - -USB_PORT1_OC1 - input - .gpio41 = GPIO_MODE_GPIO, // OC2 -MDC_KILL - .gpio42 = GPIO_MODE_GPIO, // SMB_3B_EN - output - .gpio43 = GPIO_MODE_NATIVE, // OC4 - pullup - .gpio44 = GPIO_MODE_NATIVE, // PCIECLKRQ5 - -CLKREQ_GBE - input - .gpio45 = GPIO_MODE_NATIVE, // PCIECLKRQ6 - -CLKREQ_USB30_TR - input - .gpio46 = GPIO_MODE_NATIVE, // PCIECLKRQ7 - pullup - .gpio47 = GPIO_MODE_NATIVE, // PEG_A_CLKRQ# - input - .gpio48 = GPIO_MODE_GPIO, // planarid0 - input - .gpio49 = GPIO_MODE_GPIO, // planarid1 - input - .gpio50 = GPIO_MODE_GPIO, // -SC_DTCT - input - .gpio51 = GPIO_MODE_GPIO, // pullup - .gpio52 = GPIO_MODE_GPIO, // OPTIMUS_ENABLE - output - high: igpu / low: dgpu - .gpio53 = GPIO_MODE_GPIO, // pullup - .gpio54 = GPIO_MODE_GPIO, // -BDC_PRESENCE - input - .gpio55 = GPIO_MODE_GPIO, // pullup - .gpio56 = GPIO_MODE_NATIVE, // PEG_B_CLKRQ - pullup - .gpio57 = GPIO_MODE_GPIO, // -DTPM_PRESENCE - input - .gpio58 = GPIO_MODE_NATIVE, // SML1CLK - EC_SCL2 - output - .gpio59 = GPIO_MODE_NATIVE, // OC0 - pullup - .gpio60 = GPIO_MODE_NATIVE, // SML0ALERT# - pullup - .gpio61 = GPIO_MODE_NATIVE, // SUS_STAT - output - .gpio62 = GPIO_MODE_NATIVE, // SUSCLK - output - .gpio63 = GPIO_MODE_NATIVE, // SLP_S5 - output -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_INPUT, - .gpio35 = GPIO_DIR_OUTPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_INPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_OUTPUT, - .gpio42 = GPIO_DIR_OUTPUT, - .gpio43 = GPIO_DIR_INPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_INPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_INPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_INPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_INPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_HIGH, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_LOW, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_LOW, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_LOW, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_HIGH, - .gpio48 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_LOW, - .gpio55 = GPIO_LEVEL_HIGH, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_LOW, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_LOW, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, // NC - .gpio65 = GPIO_MODE_NATIVE, // NC - .gpio66 = GPIO_MODE_NATIVE, // NC - .gpio67 = GPIO_MODE_NATIVE, // NC - .gpio68 = GPIO_MODE_GPIO, // -INT_MIC_DTCT - input - .gpio69 = GPIO_MODE_GPIO, // mic enable bit - low enable - pulldown - .gpio70 = GPIO_MODE_GPIO, // -WWAN_DTCT - input - .gpio71 = GPIO_MODE_GPIO, // -USB_SUBCARD_DTCT - input - .gpio72 = GPIO_MODE_NATIVE, // BATLOW - input - .gpio73 = GPIO_MODE_NATIVE, // pullup - .gpio74 = GPIO_MODE_NATIVE, // pullup - .gpio75 = GPIO_MODE_NATIVE, // SML1DATA - EC_SDA2 - i/o -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - .gpio65 = GPIO_DIR_OUTPUT, - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_OUTPUT, - .gpio68 = GPIO_DIR_INPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_HIGH, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_LOW, - .gpio69 = GPIO_LEVEL_LOW, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_LOW, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - .blink = &pch_gpio_set1_blink, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; -#endif diff --git a/src/mainboard/lenovo/t520/hda_verb.c b/src/mainboard/lenovo/t520/hda_verb.c deleted file mode 100644 index 694ccdd..0000000 --- a/src/mainboard/lenovo/t520/hda_verb.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Vendor Name : Conexant - * Vendor ID : 0x14f1506e - * Subsystem ID : 0x17aa21cf - * Revision ID : 0x100000 - */ - - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x14f1506e, // Codec Vendor / Device ID: Conexant CX20590 - Schematic shows CX20672 - 0x17aa21cf, // Subsystem ID - 0x0000000d, // Number of 4 dword sets - -/* Bits 31:28 - Codec Address */ -/* Bits 27:20 - NID */ -/* Bits 19:8 - Verb ID */ -/* Bits 7:0 - Payload */ - -/* NID 0x01 - NodeInfo */ - AZALIA_SUBVENDOR(0x0, 0x17AA21CF), - - AZALIA_PIN_CFG(0x0, 0x19, 0x04211040), - AZALIA_PIN_CFG(0x0, 0x1A, 0x61A19050), - AZALIA_PIN_CFG(0x0, 0x1B, 0x04A11060), - AZALIA_PIN_CFG(0x0, 0x1C, 0x6121401F), - AZALIA_PIN_CFG(0x0, 0x1D, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x1F, 0x90170110), - AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x23, 0x90A60170), - - /* Misc entries */ - 0x00B707C0, /* Enable PortB as Output with HP amp */ - 0x00D70740, /* Enable PortD as Output */ - 0x0017A200, /* Disable ClkEn of PortSenseTst */ - 0x0017C621, /* Slave Port - Port A used as microphone input for - combo Jack - Master Port - Port B used for Jack Presence Detect - Enable Combo Jack Detection */ - 0x0017A208, /* Enable ClkEn of PortSenseTst */ - 0x00170500, /* Set power state to D0 */ - 0x00170500, /* Padding */ - 0x00170500, /* Padding */ -}; - -const u32 pc_beep_verbs[] = { - 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ -}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/t520/mainboard.c b/src/mainboard/lenovo/t520/mainboard.c deleted file mode 100644 index 387bbe0..0000000 --- a/src/mainboard/lenovo/t520/mainboard.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011-2012 Google Inc. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <smbios.h> -#include <device/pci.h> -#include <cbfs.h> -#include <pc80/keyboard.h> -#include <ec/lenovo/h8/h8.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - - - -static void mainboard_init(device_t dev) -{ - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x38c0) = 0x00000007; - - pc_keyboard_init(); - - /* Enable expresscard hotplug events. */ - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0xd8, - pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) - | (1 << 30)); - pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0x42, 0x142); -} - -/* mainboard_enable is executed as first thing after -enumerate_buses(). */ -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -void h8_mainboard_init_dock (void) -{ - return; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c deleted file mode 100644 index 83be0c7..0000000 --- a/src/mainboard/lenovo/t520/romstage.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/byteorder.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <console/console.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <northbridge/intel/sandybridge/raminit_native.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/gpio.h> -#include <arch/cpu.h> -#include <cpu/x86/msr.h> -#include <cbfs.h> - -void pch_enable_lpc(void) -{ - /* T520 EC Decode Range Port60/64, Port62/66 */ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); - pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); - pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xac, - 0x80010000); -} - -void rcba_config(void) -{ - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P2IP WLAN INTA -> PIRQB - * D28IP_P4IP EXC INTB -> PIRQF - * D28IP_P5IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P2IP) | (INTB << D28IP_P4IP) | - (INTC << D28IP_P5IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - RCBA32(FD) = 0x1ee51fe3; - RCBA32(BUC) = 0; -} - -const struct southbridge_usb_port mainboard_usb_ports[] = { - { 1, 1, 0 }, /* P0 left dual conn, OC 0 */ - { 1, 1, 1 }, /* P1 system onboard USB port (eSATA), (EHCI debug), OC 1 */ - { 1, 2, -1 }, /* P2: wimax / WLAN */ - { 1, 1, -1 }, /* P3: WWAN, no OC */ - { 1, 1, -1 }, /* P4: smartcard, no OC */ - { 1, 1, -1 }, /* P5: ExpressCard, no OC */ - { 0, 2, -1 }, /* P6: empty */ - { 0, 2, -1 }, /* P7: to touch panel, no OC */ - { 1, 1, 4 }, /* P8: left dual conn, OC4 */ - { 1, 4, 5 }, /* P9: to system subcard back right, (EHCI debug), OC 5 */ - { 1, 1, -1 }, /* P10: fingerprint reader, no OC */ - { 1, 2, -1 }, /* P11: bluetooth, no OC. */ - { 1, 1, -1 }, /* P12: docking, no OC */ - { 1, 1, -1 }, /* P13: CAMERA (LCD), no OC */ -}; - -void mainboard_get_spd(spd_raw_data *spd) { - read_spd (&spd[0], 0x50); - read_spd (&spd[2], 0x51); -} diff --git a/src/mainboard/lenovo/t520/smihandler.c b/src/mainboard/lenovo/t520/smihandler.c deleted file mode 100644 index c81825e..0000000 --- a/src/mainboard/lenovo/t520/smihandler.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 0; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, - (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch (event) { - case 0x14: - /* brightness up */ - mainboard_smi_brightness_up(); - break; - case 0x15: - /* brightness down */ - mainboard_smi_brightness_down(); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, - pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - - default: - break; - } - return 0; -} - -void mainboard_smi_sleep(u8 slp_typ) -{ - if (slp_typ == 3) { - u8 ec_wake = ec_read(0x32); - /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ - if (ec_wake & 0x14) { - u32 gpe_rout; - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* Enable EC WAKE GPE. */ - outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); - gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - /* Redirect EC WAKE GPE to SCI. */ - gpe_rout &= ~(3 << 26); - gpe_rout |= (2 << 26); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); - } - } -} diff --git a/src/mainboard/lenovo/t520/thermal.h b/src/mainboard/lenovo/t520/thermal.h deleted file mode 100644 index 23bdb76..0000000 --- a/src/mainboard/lenovo/t520/thermal.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef T520_THERMAL_H -#define T520_THERMAL_H - - /* Temperature which OS will shutdown at */ - #define CRITICAL_TEMPERATURE 100 - - /* Temperature which OS will throttle CPU */ - #define PASSIVE_TEMPERATURE 90 - -#endif /* T520_THERMAL_H */ diff --git a/src/mainboard/lenovo/t530/Kconfig b/src/mainboard/lenovo/t530/Kconfig deleted file mode 100644 index 916dee0..0000000 --- a/src/mainboard/lenovo/t530/Kconfig +++ /dev/null @@ -1,77 +0,0 @@ -if BOARD_LENOVO_T530 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE - select SOUTHBRIDGE_INTEL_C216 - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select BOARD_ROMSIZE_KB_12288 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select INTEL_INT15 - select EARLY_CBMEM_INIT - select VGA - select INTEL_EDID - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select IVYBRIDGE_LVDS - select MAINBOARD_DO_NATIVE_VGA_INIT # default to native vga init - - # Workaround for EC/KBC IRQ1. - select SERIRQ_CONTINUOUS_MODE - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -config MAINBOARD_DIR - string - default lenovo/t530 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad T530" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 8 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 10 - -config VGA_BIOS_FILE - string - default "pci8086,0106.rom" - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x17aa - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x21fa - -endif # BOARD_LENOVO_T530 diff --git a/src/mainboard/lenovo/t530/Makefile.inc b/src/mainboard/lenovo/t530/Makefile.inc deleted file mode 100644 index 265059a..0000000 --- a/src/mainboard/lenovo/t530/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c -romstage-y += gpio.c diff --git a/src/mainboard/lenovo/t530/acpi/ec.asl b/src/mainboard/lenovo/t530/acpi/ec.asl deleted file mode 100644 index 4b3e72c..0000000 --- a/src/mainboard/lenovo/t530/acpi/ec.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> - -Scope(_SB.PCI0.LPCB.EC) -{ -} diff --git a/src/mainboard/lenovo/t530/acpi/gpe.asl b/src/mainboard/lenovo/t530/acpi/gpe.asl deleted file mode 100644 index eb489d5..0000000 --- a/src/mainboard/lenovo/t530/acpi/gpe.asl +++ /dev/null @@ -1,13 +0,0 @@ - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP03.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP03.HPCS) - If (_SB.PCI0.RP03.PDC) - { - Store (0x01, _SB.PCI0.RP03.PDC) - Notify (_SB.PCI0.RP03, 0x00) - } - } - } diff --git a/src/mainboard/lenovo/t530/acpi/platform.asl b/src/mainboard/lenovo/t530/acpi/platform.asl deleted file mode 100644 index 72b9dbf..0000000 --- a/src/mainboard/lenovo/t530/acpi/platform.asl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* ME may not be up yet. */ - Store (0, _TZ.MEB1) - Store (0, _TZ.MEB2) - - /* Not implemented. */ - Return(Package(){0,0}) -} diff --git a/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c695..0000000 --- a/src/mainboard/lenovo/t530/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/t530/acpi/superio.asl b/src/mainboard/lenovo/t530/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/lenovo/t530/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/t530/acpi_tables.c b/src/mainboard/lenovo/t530/acpi_tables.c deleted file mode 100644 index 26a459d..0000000 --- a/src/mainboard/lenovo/t530/acpi_tables.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> - -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Disable USB ports in S3 by default */ - gnvs->s3u0 = 0; - gnvs->s3u1 = 0; - - /* Disable USB ports in S5 by default */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - // the lid is open by default. - gnvs->lids = 1; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/t530/board_info.txt b/src/mainboard/lenovo/t530/board_info.txt deleted file mode 100644 index 689ca8f..0000000 --- a/src/mainboard/lenovo/t530/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default deleted file mode 100644 index 137f482..0000000 --- a/src/mainboard/lenovo/t530/cmos.default +++ /dev/null @@ -1,18 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -touchpad=Enable -sata_mode=AHCI -fn_ctrl_swap=Disable -sticky_fn=Disable -trackpoint=Enable -hyper_threading=Enable -backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/t530/cmos.layout b/src/mainboard/lenovo/t530/cmos.layout deleted file mode 100644 index 825317f..0000000 --- a/src/mainboard/lenovo/t530/cmos.layout +++ /dev/null @@ -1,166 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2014 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail - -# coreboot config options: EC -411 1 e 8 first_battery -412 1 e 1 bluetooth -413 1 e 1 wwan -414 1 e 1 touchpad -415 1 e 1 wlan -416 1 e 1 trackpoint -417 1 e 1 fn_ctrl_swap -418 1 e 1 sticky_fn -#419 2 r 0 unused -421 1 e 9 sata_mode -422 2 e 10 backlight - -# coreboot config options: cpu -424 1 e 2 hyper_threading -#425 7 r 0 unused - -# coreboot config options: northbridge -432 3 e 11 gfx_uma_size -#435 549 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 -960 16 r 0 mrc_scrambler_seed_chk - -# coreboot config options: check sums -984 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 Both -10 1 Keyboard only -10 2 Thinklight only -10 3 None -11 0 32M -11 1 64M -11 2 96M -11 3 128M -11 4 160M -11 5 192M -11 6 224M -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/lenovo/t530/devicetree.cb b/src/mainboard/lenovo/t530/devicetree.cb deleted file mode 100644 index b44623b..0000000 --- a/src/mainboard/lenovo/t530/devicetree.cb +++ /dev/null @@ -1,153 +0,0 @@ -chip northbridge/intel/sandybridge - - # Enable DisplayPort Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms - register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms - register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms - register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms - register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "1" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "1" - register "gpu_cpu_backlight" = "0x1155" - register "gpu_pch_backlight" = "0x11551155" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Coordinate with HW_ALL - register "pstate_coord_type" = "0xfe" - - register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 01.0 on end # PCIe Bridge for discrete graphics - device pci 02.0 on end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "alt_gp_smi_en" = "0x0000" - register "gpi1_routing" = "2" - register "gpi8_routing" = "2" - - # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock) - register "sata_port_map" = "0x3f" - # Set max SATA speed to 6.0 Gb/s - register "sata_interface_speed_support" = "0x3" - - register "gen1_dec" = "0x7c1601" - register "gen2_dec" = "0x0c15e1" - register "gen4_dec" = "0x0c06a1" - - # Enable zero-based linear PCIe root port functions - register "pcie_port_coalesce" = "1" - - device pci 14.0 on end # USB 3.0 Controller - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 on end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 (expresscard) - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1c.6 off end # PCIe Port #7 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on #LPC bridge - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa7" - register "config1" = "0x09" - register "config2" = "0xa0" - register "config3" = "0xc2" - - register "has_keyboard_backlight" = "1" - - register "beepmask0" = "0x00" - register "beepmask1" = "0x86" - register "has_power_management_beeps" = "0" - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xd0" - register "event5_enable" = "0xfc" - register "event6_enable" = "0x00" - register "event7_enable" = "0x01" - register "event8_enable" = "0x7b" - register "event9_enable" = "0xff" - register "eventa_enable" = "0x01" - register "eventb_enable" = "0x00" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - register "evente_enable" = "0x0d" - end - end # LPC bridge - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/lenovo/t530/dsdt.asl b/src/mainboard/lenovo/t530/dsdt.asl deleted file mode 100644 index c73f795..0000000 --- a/src/mainboard/lenovo/t530/dsdt.asl +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP03_IS_EXPRESSCARD 1 -#define EC_LENOVO_H8_ME_WORKAROUND 1 -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/lenovo/t530/fadt.c b/src/mainboard/lenovo/t530/fadt.c deleted file mode 100644 index 27e6303..0000000 --- a/src/mainboard/lenovo/t530/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 101; /* c2 not supported */ - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/lenovo/t530/gpio.c b/src/mainboard/lenovo/t530/gpio.c deleted file mode 100644 index 32e0e17..0000000 --- a/src/mainboard/lenovo/t530/gpio.c +++ /dev/null @@ -1,345 +0,0 @@ -#include "southbridge/intel/bd82x6x/gpio.h" -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, - .gpio1 = GPIO_MODE_GPIO, - .gpio2 = GPIO_MODE_GPIO, - .gpio3 = GPIO_MODE_GPIO, - .gpio4 = GPIO_MODE_GPIO, - .gpio5 = GPIO_MODE_GPIO, - .gpio6 = GPIO_MODE_GPIO, - .gpio7 = GPIO_MODE_GPIO, - .gpio8 = GPIO_MODE_GPIO, - .gpio9 = GPIO_MODE_NATIVE, - .gpio10 = GPIO_MODE_GPIO, - .gpio11 = GPIO_MODE_NATIVE, - .gpio12 = GPIO_MODE_NATIVE, - .gpio13 = GPIO_MODE_GPIO, - .gpio14 = GPIO_MODE_NATIVE, - .gpio15 = GPIO_MODE_GPIO, - .gpio16 = GPIO_MODE_NATIVE, - .gpio17 = GPIO_MODE_GPIO, - .gpio18 = GPIO_MODE_NATIVE, - .gpio19 = GPIO_MODE_NATIVE, - .gpio20 = GPIO_MODE_NATIVE, - .gpio21 = GPIO_MODE_GPIO, - .gpio22 = GPIO_MODE_GPIO, - .gpio23 = GPIO_MODE_NATIVE, - .gpio24 = GPIO_MODE_GPIO, - .gpio25 = GPIO_MODE_NATIVE, - .gpio26 = GPIO_MODE_NATIVE, - .gpio27 = GPIO_MODE_GPIO, - .gpio28 = GPIO_MODE_GPIO, - .gpio29 = GPIO_MODE_GPIO, - .gpio30 = GPIO_MODE_NATIVE, - .gpio31 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_OUTPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_INPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_OUTPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_OUTPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_INPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_HIGH, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_LOW, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio6 = GPIO_LEVEL_LOW, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_LOW, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_HIGH, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_LOW, - .gpio16 = GPIO_LEVEL_HIGH, - .gpio17 = GPIO_LEVEL_LOW, - .gpio18 = GPIO_LEVEL_LOW, - .gpio19 = GPIO_LEVEL_LOW, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_LOW, - .gpio22 = GPIO_LEVEL_LOW, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio0 = GPIO_NO_INVERT, - .gpio1 = GPIO_INVERT, - .gpio2 = GPIO_NO_INVERT, - .gpio3 = GPIO_NO_INVERT, - .gpio4 = GPIO_NO_INVERT, - .gpio5 = GPIO_NO_INVERT, - .gpio6 = GPIO_NO_INVERT, - .gpio7 = GPIO_NO_INVERT, - .gpio8 = GPIO_NO_INVERT, - .gpio9 = GPIO_NO_INVERT, - .gpio10 = GPIO_NO_INVERT, - .gpio11 = GPIO_NO_INVERT, - .gpio12 = GPIO_NO_INVERT, - .gpio13 = GPIO_INVERT, - .gpio14 = GPIO_NO_INVERT, - .gpio15 = GPIO_NO_INVERT, - .gpio16 = GPIO_NO_INVERT, - .gpio17 = GPIO_NO_INVERT, - .gpio18 = GPIO_NO_INVERT, - .gpio19 = GPIO_NO_INVERT, - .gpio20 = GPIO_NO_INVERT, - .gpio21 = GPIO_NO_INVERT, - .gpio22 = GPIO_NO_INVERT, - .gpio23 = GPIO_NO_INVERT, - .gpio24 = GPIO_NO_INVERT, - .gpio25 = GPIO_NO_INVERT, - .gpio26 = GPIO_NO_INVERT, - .gpio27 = GPIO_NO_INVERT, - .gpio28 = GPIO_NO_INVERT, - .gpio29 = GPIO_NO_INVERT, - .gpio30 = GPIO_NO_INVERT, - .gpio31 = GPIO_NO_INVERT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_blink = { - .gpio0 = GPIO_NO_BLINK, - .gpio1 = GPIO_NO_BLINK, - .gpio2 = GPIO_NO_BLINK, - .gpio3 = GPIO_NO_BLINK, - .gpio4 = GPIO_NO_BLINK, - .gpio5 = GPIO_NO_BLINK, - .gpio6 = GPIO_NO_BLINK, - .gpio7 = GPIO_NO_BLINK, - .gpio8 = GPIO_NO_BLINK, - .gpio9 = GPIO_NO_BLINK, - .gpio10 = GPIO_NO_BLINK, - .gpio11 = GPIO_NO_BLINK, - .gpio12 = GPIO_NO_BLINK, - .gpio13 = GPIO_NO_BLINK, - .gpio14 = GPIO_NO_BLINK, - .gpio15 = GPIO_NO_BLINK, - .gpio16 = GPIO_NO_BLINK, - .gpio17 = GPIO_NO_BLINK, - .gpio18 = GPIO_NO_BLINK, - .gpio19 = GPIO_NO_BLINK, - .gpio20 = GPIO_NO_BLINK, - .gpio21 = GPIO_NO_BLINK, - .gpio22 = GPIO_NO_BLINK, - .gpio23 = GPIO_NO_BLINK, - .gpio24 = GPIO_NO_BLINK, - .gpio25 = GPIO_NO_BLINK, - .gpio26 = GPIO_NO_BLINK, - .gpio27 = GPIO_NO_BLINK, - .gpio28 = GPIO_NO_BLINK, - .gpio29 = GPIO_NO_BLINK, - .gpio30 = GPIO_NO_BLINK, - .gpio31 = GPIO_NO_BLINK, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, - .gpio33 = GPIO_MODE_GPIO, - .gpio34 = GPIO_MODE_GPIO, - .gpio35 = GPIO_MODE_GPIO, - .gpio36 = GPIO_MODE_GPIO, - .gpio37 = GPIO_MODE_GPIO, - .gpio38 = GPIO_MODE_GPIO, - .gpio39 = GPIO_MODE_GPIO, - .gpio40 = GPIO_MODE_NATIVE, - .gpio41 = GPIO_MODE_NATIVE, - .gpio42 = GPIO_MODE_NATIVE, - .gpio43 = GPIO_MODE_GPIO, - .gpio44 = GPIO_MODE_NATIVE, - .gpio45 = GPIO_MODE_NATIVE, - .gpio46 = GPIO_MODE_NATIVE, - .gpio47 = GPIO_MODE_NATIVE, - .gpio48 = GPIO_MODE_GPIO, - .gpio49 = GPIO_MODE_GPIO, - .gpio50 = GPIO_MODE_GPIO, - .gpio51 = GPIO_MODE_GPIO, - .gpio52 = GPIO_MODE_GPIO, - .gpio53 = GPIO_MODE_GPIO, - .gpio54 = GPIO_MODE_GPIO, - .gpio55 = GPIO_MODE_GPIO, - .gpio56 = GPIO_MODE_NATIVE, - .gpio57 = GPIO_MODE_GPIO, - .gpio58 = GPIO_MODE_NATIVE, - .gpio59 = GPIO_MODE_NATIVE, - .gpio60 = GPIO_MODE_NATIVE, - .gpio61 = GPIO_MODE_NATIVE, - .gpio62 = GPIO_MODE_NATIVE, - .gpio63 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_INPUT, - .gpio35 = GPIO_DIR_INPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_INPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_INPUT, - .gpio42 = GPIO_DIR_INPUT, - .gpio43 = GPIO_DIR_OUTPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_INPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_INPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_INPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_INPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_LOW, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_LOW, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_LOW, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_HIGH, - .gpio48 = GPIO_LEVEL_LOW, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_LOW, - .gpio55 = GPIO_LEVEL_HIGH, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_HIGH, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_HIGH, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_GPIO, - .gpio65 = GPIO_MODE_GPIO, - .gpio66 = GPIO_MODE_GPIO, - .gpio67 = GPIO_MODE_GPIO, - .gpio68 = GPIO_MODE_GPIO, - .gpio69 = GPIO_MODE_GPIO, - .gpio70 = GPIO_MODE_GPIO, - .gpio71 = GPIO_MODE_GPIO, - .gpio72 = GPIO_MODE_NATIVE, - .gpio73 = GPIO_MODE_NATIVE, - .gpio74 = GPIO_MODE_NATIVE, - .gpio75 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_INPUT, - .gpio65 = GPIO_DIR_INPUT, - .gpio66 = GPIO_DIR_INPUT, - .gpio67 = GPIO_DIR_INPUT, - .gpio68 = GPIO_DIR_INPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_HIGH, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_LOW, - .gpio69 = GPIO_LEVEL_LOW, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_LOW, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .blink = &pch_gpio_set1_blink, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; diff --git a/src/mainboard/lenovo/t530/hda_verb.c b/src/mainboard/lenovo/t530/hda_verb.c deleted file mode 100644 index bd176c1..0000000 --- a/src/mainboard/lenovo/t530/hda_verb.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Vendor Name : IDT - * Vendor ID : 0x10ec0269 - * Subsystem ID : 0x17aa21fa - * Revision ID : 0x100303 - */ - - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269VC - 0x17aa21fa, // Subsystem ID - 0x00000012, // Number of 4 dword sets - -/* Bits 31:28 - Codec Address */ -/* Bits 27:20 - NID */ -/* Bits 19:8 - Verb ID */ -/* Bits 7:0 - Payload */ - -/* NID 0x01 - NodeInfo */ - AZALIA_SUBVENDOR(0x0, 0x17AA21FA), - -/* NID 0x0A - External Microphone Connector - * Config=0x04A11020 (External,Right; MicIn,3.5mm; Black,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0A, 0x04A11020), - -/* NID 0x0B - Headphone Connector - * Config=0x0421101F (External,Right; HP,3.5mm; Black,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0B, 0x0421101F), - -/* NID 0x0C - Not connected - * Config=0x40F000F0 (N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0C, 0x40F000F0), - -/* NID 0x0D - Internal Speakers - * Config=0x90170110 (Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0D, 0x90170110), - -/* NID 0x0F - Not connected - * Config=0x40F000F0 - */ - AZALIA_PIN_CFG(0x0, 0x0F, 0x40F000F0), - -/* NID 0x11 - Internal Microphone - * Config=0xD5A30140 (Fixed internal,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x11, 0xD5A30140), - AZALIA_PIN_CFG(0x0, 0x12, 0x90A60140), - AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), - AZALIA_PIN_CFG(0x0, 0x15, 0x03211020), - AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), - AZALIA_PIN_CFG(0x0, 0x19, 0x411111F0), - - 0x01970804, - 0x01870803, - 0x01470740, - 0x00970600, - - AZALIA_PIN_CFG(0x0, 0x1A, 0x411111F0), - AZALIA_PIN_CFG(0x0, 0x1D, 0x40138205), - AZALIA_PIN_CFG(0x0, 0x1E, 0x411111F0), - - /* Misc entries */ - 0x00370600, - 0x00270600, - 0x00B707C0, /* Enable PortB as Output with HP amp */ - 0x00D70740, /* Enable PortD as Output */ - 0x0017A200, /* Disable ClkEn of PortSenseTst */ - 0x0017C621, /* Slave Port - Port A used as microphone input for - combo Jack - Master Port - Port B used for Jack Presence Detect - Enable Combo Jack Detection */ - 0x0017A208, /* Enable ClkEn of PortSenseTst */ - 0x00170500, /* Set power state to D0 */ - - /* --- Next Codec --- */ - -/* Vendor Name : Intel - * Vendor ID : 0x80862806 - * Subsystem ID : 0x80860101 - * Revision ID : 0x100000 - */ - /* coreboot specific header */ - 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of IDs - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x3, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[] = { - 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ -}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/t530/mainboard.c b/src/mainboard/lenovo/t530/mainboard.c deleted file mode 100644 index f8c9dae..0000000 --- a/src/mainboard/lenovo/t530/mainboard.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011-2012 Google Inc. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <smbios.h> -#include <device/pci.h> -#include <cbfs.h> -#include <pc80/keyboard.h> -#include <ec/lenovo/h8/h8.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - - - -static void mainboard_init(device_t dev) -{ - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x38c0) = 0x00000007; - - /* This sneaked in here, because X201 SuperIO chip isn't really - connected to anything and hence we don't init it. - */ - pc_keyboard_init(); - - /* Enable expresscard hotplug events. */ - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), - 0xd8, - pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), 0xd8) - | (1 << 30)); - pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), - 0x42, 0x142); -} - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -void h8_mainboard_init_dock (void) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/t530/romstage.c b/src/mainboard/lenovo/t530/romstage.c deleted file mode 100644 index 115f83b..0000000 --- a/src/mainboard/lenovo/t530/romstage.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/byteorder.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <console/console.h> -#include "northbridge/intel/sandybridge/raminit_native.h" -#include "southbridge/intel/bd82x6x/pch.h" - -void pch_enable_lpc(void) -{ - /* X230 EC Decode Range Port60/64, Port62/66 */ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); - pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); - pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xac, - 0x80010000); -} - -void rcba_config(void) -{ - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - RCBA32(FD) = 0x17f81fe3; - RCBA32(BUC) = 0; -} - -const struct southbridge_usb_port mainboard_usb_ports[] = { - { 1, 1, 0 }, - { 1, 1, 1 }, - { 1, 2, 3 }, - { 1, 1, -1 }, - { 1, 1, -1 }, - { 1, 0, -1 }, - { 0, 0, -1 }, - { 1, 2, -1 }, - { 1, 0, -1 }, - { 1, 1, 5 }, - { 1, 0, -1 }, - { 1, 0, -1 }, - { 1, 3, -1 }, - { 1, 1, -1 }, -}; - -void mainboard_get_spd(spd_raw_data *spd) { - read_spd (&spd[0], 0x50); - read_spd (&spd[2], 0x51); -} diff --git a/src/mainboard/lenovo/t530/smihandler.c b/src/mainboard/lenovo/t530/smihandler.c deleted file mode 100644 index 5bcde1c..0000000 --- a/src/mainboard/lenovo/t530/smihandler.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, - (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch (event) { - case 0x14: - /* brightness up */ - mainboard_smi_brightness_up(); - break; - case 0x15: - /* brightness down */ - mainboard_smi_brightness_down(); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, - pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - - default: - break; - } - return 0; -} - -void mainboard_smi_sleep(u8 slp_typ) -{ - if (slp_typ == 3) { - u8 ec_wake = ec_read(0x32); - /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ - if (ec_wake & 0x14) { - u32 gpe_rout; - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* Enable EC WAKE GPE. */ - outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); - gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - /* Redirect EC WAKE GPE to SCI. */ - gpe_rout &= ~(3 << 26); - gpe_rout |= (2 << 26); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); - } - } -} diff --git a/src/mainboard/lenovo/t530/thermal.h b/src/mainboard/lenovo/t530/thermal.h deleted file mode 100644 index 2fafcde..0000000 --- a/src/mainboard/lenovo/t530/thermal.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef T530_THERMAL_H -#define T530_THERMAL_H - - /* Temperature which OS will shutdown at */ - #define CRITICAL_TEMPERATURE 100 - - /* Temperature which OS will throttle CPU */ - #define PASSIVE_TEMPERATURE 90 - -#endif /* T530_THERMAL_H */ diff --git a/src/mainboard/lenovo/t60/Kconfig b/src/mainboard/lenovo/t60/Kconfig deleted file mode 100644 index ecf1d1a..0000000 --- a/src/mainboard/lenovo/t60/Kconfig +++ /dev/null @@ -1,58 +0,0 @@ -if BOARD_LENOVO_T60 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_MFCPGA478 - select NORTHBRIDGE_INTEL_I945 - select NORTHBRIDGE_INTEL_SUBTYPE_I945GM - select SOUTHBRIDGE_INTEL_I82801GX - select SUPERIO_NSC_PC87382 - select SUPERIO_NSC_PC87384 - select SOUTHBRIDGE_TI_PCI1X2X - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select DRIVERS_ICS_954309 - select HAVE_OPTION_TABLE - select INTEL_INT15 - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_2048 - select CHANNEL_XOR_RANDOMIZATION - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select H8_DOCK_EARLY_INIT - select HAVE_CMOS_DEFAULT -config MAINBOARD_DIR - string - default lenovo/t60 - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad T60" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 2 - -config SEABIOS_PS2_TIMEOUT - int - default 3000 - -endif diff --git a/src/mainboard/lenovo/t60/Makefile.inc b/src/mainboard/lenovo/t60/Makefile.inc deleted file mode 100644 index 5e09e99..0000000 --- a/src/mainboard/lenovo/t60/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c -romstage-y += dock.c diff --git a/src/mainboard/lenovo/t60/acpi/dock.asl b/src/mainboard/lenovo/t60/acpi/dock.asl deleted file mode 100644 index ba50609..0000000 --- a/src/mainboard/lenovo/t60/acpi/dock.asl +++ /dev/null @@ -1,98 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" - -Scope (_SB) -{ - OperationRegion (DLPC, SystemIO, 0x164c, 1) - Field(DLPC, ByteAcc, NoLock, Preserve) - { - , 3, - DSTA, 1, - } - - Device(DOCK) - { - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_DCK, 1, NotSerialized) - { - if (Arg0) { - Sleep(250) - /* connect dock */ - TRAP(SMI_DOCK_CONNECT) - } else { - /* disconnect dock */ - TRAP(SMI_DOCK_DISCONNECT) - } - - Xor(Arg0, DSTA, Local0) - Return (Local0) - } - - Method(_STA, 0, NotSerialized) - { - Return (DSTA) - } - } -} - -Scope(_SB.PCI0.LPCB.EC) -{ - OperationRegion(PMH7, SystemIO, 0x15e0, 0x10) - Field(PMH7, ByteAcc, NoLock, Preserve) - { - Offset(0x0c), - PIDX, 8, - Offset(0x0e), - PDAT, 8, - } - - IndexField(PIDX, PDAT, ByteAcc, NoLock, Preserve) - { - Offset (0x61), - DPWR, 1, - } - - Method(_Q18, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q37, 0, NotSerialized) - { - if (DPWR) { - Notify(_SB.DOCK, 0) - } else { - Notify(_SB.DOCK, 3) - } - } - - Method(_Q50, 0, NotSerialized) - { - if (_SB.DOCK._STA()) { - Notify(_SB.DOCK, 1) - } - } -} diff --git a/src/mainboard/lenovo/t60/acpi/ec.asl b/src/mainboard/lenovo/t60/acpi/ec.asl deleted file mode 100644 index a92bc4a..0000000 --- a/src/mainboard/lenovo/t60/acpi/ec.asl +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/t60/acpi/gpe.asl b/src/mainboard/lenovo/t60/acpi/gpe.asl deleted file mode 100644 index b160b50..0000000 --- a/src/mainboard/lenovo/t60/acpi/gpe.asl +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" -Scope (_GPE) -{ - Method(_L18, 0, NotSerialized) - { - /* Read EC register to clear wake status */ - Store(_SB.PCI0.LPCB.EC.WAKE, Local0) - } -} diff --git a/src/mainboard/lenovo/t60/acpi/i945_pci_irqs.asl b/src/mainboard/lenovo/t60/acpi/i945_pci_irqs.asl deleted file mode 100644 index e834ae1..0000000 --- a/src/mainboard/lenovo/t60/acpi/i945_pci_irqs.asl +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * i945 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x10 } // SATA - }) - } Else { - Return (Package() { - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 } // SATA - }) - } -} diff --git a/src/mainboard/lenovo/t60/acpi/ich7_pci_irqs.asl b/src/mainboard/lenovo/t60/acpi/ich7_pci_irqs.asl deleted file mode 100644 index 548996c..0000000 --- a/src/mainboard/lenovo/t60/acpi/ich7_pci_irqs.asl +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH7 - */ - -If (PICM) { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } - }) - } Else { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } - }) -} diff --git a/src/mainboard/lenovo/t60/acpi/mainboard.asl b/src/mainboard/lenovo/t60/acpi/mainboard.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/lenovo/t60/acpi/platform.asl b/src/mainboard/lenovo/t60/acpi/platform.asl deleted file mode 100644 index ddb8ff3..0000000 --- a/src/mainboard/lenovo/t60/acpi/platform.asl +++ /dev/null @@ -1,205 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - _SB.PCI0.LPCB.EC.MUTE(1) - _SB.PCI0.LPCB.EC.USBP(0) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - Return(Package(){0,0}) -} - -// Power notification - -External (_PR_.CPU0, DeviceObj) -External (_PR_.CPU1, DeviceObj) - -Method (PNOT) -{ - If (MPEN) { - If(And(PDC0, 0x08)) { - Notify (_PR_.CPU0, 0x80) // _PPC - - If (And(PDC0, 0x10)) { - Sleep(100) - Notify(_PR_.CPU0, 0x81) // _CST - } - } - - If(And(PDC1, 0x08)) { - Notify (_PR_.CPU1, 0x80) // _PPC - If (And(PDC1, 0x10)) { - Sleep(100) - Notify(_PR_.CPU1, 0x81) // _CST - } - } - - } Else { // UP - Notify (_PR_.CPU0, 0x80) - Sleep(0x64) - Notify(_PR_.CPU0, 0x81) - } - - // Notify the Batteries - Notify(_SB.PCI0.LPCB.EC.BAT0, 0x80) // Execute BAT1 _BST - Notify(_SB.PCI0.LPCB.EC.BAT1, 0x80) // Execute BAT2 _BST -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - // TRAP(71) // TODO - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - /* Linux answers _OSI with "True" for a couple of - * Windows version queries. But unlike Windows it - * needs a Video repost, so let's determine whether - * we're running Linux. - */ - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - - /* And the OS workarounds start right after we know what we're - * running: Windows XP SP1 needs to have C-State coordination - * enabled in SMM. - */ - If (LAnd(LEqual(OSYS, 2001), MPEN)) { - // TRAP(61) // TODO - } - - /* SMM power state and C4-on-C3 settings need to be updated */ - // TRAP(43) // TODO - } -} diff --git a/src/mainboard/lenovo/t60/acpi/superio.asl b/src/mainboard/lenovo/t60/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/lenovo/t60/acpi/video.asl b/src/mainboard/lenovo/t60/acpi/video.asl deleted file mode 100644 index 9a458e9..0000000 --- a/src/mainboard/lenovo/t60/acpi/video.asl +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" - -Device (DSPC) -{ - Name (_ADR, 0x00020001) - OperationRegion (DSPC, PCI_Config, 0x00, 0x100) - Field (DSPC, ByteAcc, NoLock, Preserve) - { - Offset (0xf4), - BRTC, 8 - } - - Method(BRTD, 0, NotSerialized) - { - Trap(SMI_BRIGHTNESS_DOWN) - Store(BRTC, Local0) - if (LGreater (Local0, 15)) - { - Subtract(Local0, 16, Local0) - Store(Local0, BRTC) - } - } - - Method(BRTU, 0, NotSerialized) - { - Trap(SMI_BRIGHTNESS_UP) - Store (BRTC, Local0) - if (LLess(Local0, 0xff)) - { - Add (Local0, 16, Local0) - Store(Local0, BRTC) - } - } -} diff --git a/src/mainboard/lenovo/t60/acpi_tables.c b/src/mainboard/lenovo/t60/acpi_tables.c deleted file mode 100644 index ada7d08..0000000 --- a/src/mainboard/lenovo/t60/acpi_tables.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#include "southbridge/intel/i82801gx/nvs.h" -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - - /* Enable both COM ports */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); - - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/t60/board_info.txt b/src/mainboard/lenovo/t60/board_info.txt deleted file mode 100644 index f7b8c63..0000000 --- a/src/mainboard/lenovo/t60/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: T60/T60p -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lenovo/t60/cmos.default b/src/mainboard/lenovo/t60/cmos.default deleted file mode 100644 index 6adf85d..0000000 --- a/src/mainboard/lenovo/t60/cmos.default +++ /dev/null @@ -1,21 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -hyper_threading=Enable -nmi=Enable -boot_devices='' -boot_default=0x41 -cmos_defaults_loaded=Yes -lpt=Enable -touchpad=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wlan=Enable -wwan=Enable -trackpoint=Enable -fn_ctrl_swap=Disable -sticky_fn=Disable -power_management_beeps=Enable -low_battery_beep=Enable diff --git a/src/mainboard/lenovo/t60/cmos.layout b/src/mainboard/lenovo/t60/cmos.layout deleted file mode 100644 index 4761696..0000000 --- a/src/mainboard/lenovo/t60/cmos.layout +++ /dev/null @@ -1,159 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2008 coresystems GmbH -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -#409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default -936 1 e 8 cmos_defaults_loaded -937 1 e 1 lpt -#938 46 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ram initialization internal data -1024 8 r 0 C0WL0REOST -1032 8 r 0 C1WL0REOST -1040 8 r 0 RCVENMT -1048 4 r 0 C0DRT1 -1052 4 r 0 C1DRT1 - -1060 1 e 1 touchpad -1061 1 e 1 bluetooth -1062 1 e 1 wwan -1063 1 e 1 wlan -1064 8 h 0 volume -1072 1 e 9 first_battery -1073 1 e 1 trackpoint -1074 1 e 1 fn_ctrl_swap -1075 1 e 1 sticky_fn -1076 1 e 1 power_management_beeps -1077 1 e 1 low_battery_beep -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 No -8 1 Yes -9 0 Secondary -9 1 Primary -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lenovo/t60/devicetree.cb b/src/mainboard/lenovo/t60/devicetree.cb deleted file mode 100644 index f092380..0000000 --- a/src/mainboard/lenovo/t60/devicetree.cb +++ /dev/null @@ -1,230 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/i945 - - device cpu_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x17aa 0x2015 - end - device pci 01.0 on # PCI-e - device pci 00.0 on # VGA - subsystemid 0x17aa 0x20a4 - end - end - - device pci 02.0 on # GMA Graphics controller - subsystemid 0x17aa 0x201a - end - device pci 02.1 on # display controller - subsystemid 0x17aa 0x201a - end - - chip southbridge/intel/i82801gx - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi13_routing" = "2" - register "gpi12_routing" = "2" - register "gpi8_routing" = "2" - - register "sata_ahci" = "0x1" - register "sata_ports_implemented" = "0x01" - - register "gpe0_en" = "0x11000006" - register "alt_gp_smi_en" = "0x1000" - - register "c4onc3_enable" = "1" - - device pci 1b.0 on # Audio Controller - subsystemid 0x17aa 0x2010 - end - device pci 1c.0 on # Ethernet - subsystemid 0x17aa 0x2001 - end - device pci 1c.1 on end # WLAN - device pci 1d.0 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.1 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.2 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.3 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.7 on # USB2 EHCI - subsystemid 0x17aa 0x200b - end - device pci 1e.0 on # PCI Bridge - chip southbridge/ti/pci1x2x - device pci 00.0 on - subsystemid 0x17aa 0x2012 - end - register "scr" = "0x0844d070" - register "mrr" = "0x01d01002" - - end - end - device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x17aa 0x2009 - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - - register "config0" = "0xa6" - register "config1" = "0x05" - register "config2" = "0xa0" - register "config3" = "0x01" - - register "beepmask0" = "0xfe" - register "beepmask1" = "0x96" - register "has_power_management_beeps" = "1" - - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xf4" - register "event5_enable" = "0x3f" - register "event6_enable" = "0x80" - register "event7_enable" = "0x01" - register "event8_enable" = "0x01" - register "event9_enable" = "0xff" - register "eventa_enable" = "0xff" - register "eventb_enable" = "0xff" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - register "eventc_enable" = "0x3c" - - end - chip superio/nsc/pc87382 - device pnp 164e.2 on # IR - io 0x60 = 0x2f8 - end - - device pnp 164e.3 off # Serial Port - io 0x60 = 0x3f8 - end - - device pnp 164e.7 on # GPIO - io 0x60 = 0x1680 - end - - device pnp 164e.19 on # DLPC - io 0x60 = 0x164c - end - end - - chip superio/nsc/pc87384 - device pnp 2e.0 off #FDC - end - - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x3bc - irq 0x70 = 7 - end - - device pnp 2e.2 off # Serial Port / IR - io 0x60 = 0x2f8 - irq 0x70 = 4 - end - - device pnp 2e.3 on # Serial Port - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.7 on # GPIO - io 0x60 = 0x1620 - end - - device pnp 2e.a off # WDT - end - end - end - device pci 1f.1 on # IDE - subsystemid 0x17aa 0x200c - end - device pci 1f.2 on # SATA - subsystemid 0x17aa 0x200d - end - device pci 1f.3 on # SMBUS - subsystemid 0x17aa 0x200f - chip drivers/ics/954309 - register "reg0" = "0x2e" - register "reg1" = "0xf7" - register "reg2" = "0x3c" - register "reg3" = "0x20" - register "reg4" = "0x01" - register "reg5" = "0x00" - register "reg6" = "0x1b" - register "reg7" = "0x01" - register "reg8" = "0x54" - register "reg9" = "0xff" - register "reg10" = "0xff" - register "reg11" = "0x07" - device i2c 69 on end - end - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end - end - end -end diff --git a/src/mainboard/lenovo/t60/dock.c b/src/mainboard/lenovo/t60/dock.c deleted file mode 100644 index b01f8e8..0000000 --- a/src/mainboard/lenovo/t60/dock.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include "dock.h" -#include "superio/nsc/pc87384/pc87384.h" -#include "ec/acpi/ec.h" -#include "ec/lenovo/pmh7/pmh7.h" -#include "southbridge/intel/i82801gx/i82801gx.h" - -#define DLPC_CONTROL 0x164c - -static void dlpc_write_register(int reg, int value) -{ - outb(reg, 0x164e); - outb(value, 0x164f); -} - -static u8 dlpc_read_register(int reg) -{ - outb(reg, 0x164e); - return inb(0x164f); -} - -static void dock_write_register(int reg, int value) -{ - outb(reg, 0x2e); - outb(value, 0x2f); -} - -static u8 dock_read_register(int reg) -{ - outb(reg, 0x2e); - return inb(0x2f); -} - -static void dlpc_gpio_set_mode(int port, int mode) -{ - dlpc_write_register(0xf0, port); - dlpc_write_register(0xf1, mode); -} - -static void dock_gpio_set_mode(int port, int mode, int irq) -{ - dock_write_register(0xf0, port); - dock_write_register(0xf1, mode); - dock_write_register(0xf2, irq); -} - -static void dlpc_gpio_init(void) -{ - /* Select GPIO module */ - dlpc_write_register(0x07, 0x07); - /* GPIO Base Address 0x1680 */ - dlpc_write_register(0x60, 0x16); - dlpc_write_register(0x61, 0x80); - - /* Activate GPIO */ - dlpc_write_register(0x30, 0x01); - - dlpc_gpio_set_mode(0x00, 3); - dlpc_gpio_set_mode(0x01, 3); - dlpc_gpio_set_mode(0x02, 0); - dlpc_gpio_set_mode(0x03, 3); - dlpc_gpio_set_mode(0x04, 4); - dlpc_gpio_set_mode(0x20, 4); - dlpc_gpio_set_mode(0x21, 4); - dlpc_gpio_set_mode(0x23, 4); -} - -int dlpc_init(void) -{ - int timeout = 1000; - - /* Enable 14.318MHz CLK on CLKIN */ - dlpc_write_register(0x29, 0xa0); - while(!(dlpc_read_register(0x29) & 0x10) && timeout--) - udelay(1000); - - if (!timeout) - return 1; - - /* Select DLPC module */ - dlpc_write_register(0x07, 0x19); - /* DLPC Base Address */ - dlpc_write_register(0x60, (DLPC_CONTROL >> 8) & 0xff); - dlpc_write_register(0x61, DLPC_CONTROL & 0xff); - /* Activate DLPC */ - dlpc_write_register(0x30, 0x01); - - /* Reset docking state */ - outb(0x00, DLPC_CONTROL); - - dlpc_gpio_init(); - return 0; -} - -static int dock_superio_init(void) -{ - int timeout = 1000; - /* startup 14.318MHz Clock */ - dock_write_register(0x29, 0xa0); - /* wait until clock is settled */ - while(!(dock_read_register(0x29) & 0x10) && timeout--) - udelay(1000); - - if (!timeout) - return 1; - - /* set GPIO pins to Serial/Parallel Port - * functions - */ - dock_write_register(0x22, 0xa9); - - /* enable serial port */ - dock_write_register(0x07, PC87384_SP1); - dock_write_register(0x30, 0x01); - - dock_write_register(0x07, PC87384_GPIO); - dock_write_register(0x60, 0x16); - dock_write_register(0x61, 0x20); - /* enable GPIO */ - dock_write_register(0x30, 0x01); - - dock_gpio_set_mode(0x00, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x01, PC87384_GPIO_PIN_TYPE_PUSH_PULL | - PC87384_GPIO_PIN_OE, 0x00); - - dock_gpio_set_mode(0x02, PC87384_GPIO_PIN_TYPE_PUSH_PULL | - PC87384_GPIO_PIN_OE, 0x00); - - dock_gpio_set_mode(0x03, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x04, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x05, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x06, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x07, PC87384_GPIO_PIN_DEBOUNCE | - PC87384_GPIO_PIN_PULLUP, 0x00); - - - /* no GPIO events enabled for PORT0 */ - outb(0x00, 0x1622); - /* clear GPIO events on PORT0 */ - outb(0xff, 0x1623); - outb(0xff, 0x1624); - /* no GPIO events enabled for PORT1 */ - outb(0x00, 0x1626); - - /* clear GPIO events on PORT1*/ - outb(0xff, 0x1627); - outb(0x1F, 0x1628); - outb(0xfd, 0x1620); - return 0; -} - -int dock_connect(void) -{ - int timeout = 1000; - - outb(0x07, DLPC_CONTROL); - - timeout = 1000; - - while(!(inb(DLPC_CONTROL) & 8) && timeout--) - udelay(1000); - - if (!timeout) { - /* docking failed, disable DLPC switch */ - outb(0x00, DLPC_CONTROL); - dlpc_write_register(0x30, 0x00); - return 1; - } - - /* Assert D_PLTRST# */ - outb(0xfe, 0x1680); - udelay(1000); - /* Deassert D_PLTRST# */ - outb(0xff, 0x1680); - udelay(10000); - - return dock_superio_init(); -} - -void dock_disconnect(void) -{ - /* disconnect LPC bus */ - outb(0x00, DLPC_CONTROL); - /* Assert PLTRST and DLPCPD */ - outb(0xfc, 0x1680); -} - -int dock_present(void) -{ - return pmh7_register_read(0x61) & 1; -} - -int legacy_io_present(void) -{ - return !(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40); -} - -void legacy_io_init(void) -{ - /* Enable Power for Ultrabay slot */ - pmh7_ultrabay_power_enable(1); - udelay(100000); - dock_superio_init(); -} diff --git a/src/mainboard/lenovo/t60/dock.h b/src/mainboard/lenovo/t60/dock.h deleted file mode 100644 index 631f007..0000000 --- a/src/mainboard/lenovo/t60/dock.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef THINKPAD_X60_DOCK_H -#define THINKPAD_X60_DOCK_H - -extern int dock_connect(void); -extern void dock_disconnect(void); -extern int dock_present(void); -extern int dlpc_init(void); - -extern int legacy_io_present(void); -extern void legacy_io_init(void); -#endif diff --git a/src/mainboard/lenovo/t60/dsdt.asl b/src/mainboard/lenovo/t60/dsdt.asl deleted file mode 100644 index 4122917..0000000 --- a/src/mainboard/lenovo/t60/dsdt.asl +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 28 -#define BRIGHTNESS_UP \DSPC.BRTU -#define BRIGHTNESS_DOWN \DSPC.BRTD -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, // DSDT revision: ACPI v3.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> - - // General Purpose Events - #include "acpi/gpe.asl" - - // mainboard specific devices - #include "acpi/mainboard.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/i945/acpi/i945.asl> - #include <southbridge/intel/i82801gx/acpi/ich7.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> - - // Dock support code - #include "acpi/dock.asl" -} diff --git a/src/mainboard/lenovo/t60/fadt.c b/src/mainboard/lenovo/t60/fadt.c deleted file mode 100644 index 96767bd..0000000 --- a/src/mainboard/lenovo/t60/fadt.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/acpi.h> - -void mainboard_fill_fadt(acpi_fadt_t * fadt) -{ - fadt->p_lvl3_lat = 0x23; - fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; -} diff --git a/src/mainboard/lenovo/t60/hda_verb.c b/src/mainboard/lenovo/t60/hda_verb.c deleted file mode 100644 index 072a306..0000000 --- a/src/mainboard/lenovo/t60/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/t60/irq_tables.c b/src/mainboard/lenovo/t60/irq_tables.c deleted file mode 100644 index 8991d7f..0000000 --- a/src/mainboard/lenovo/t60/irq_tables.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 15, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf5, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ - {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ - {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ - {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ - {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ - {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ - {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ - {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ - {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ - {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ - {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ - {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ - {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ - {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lenovo/t60/mainboard.c b/src/mainboard/lenovo/t60/mainboard.c deleted file mode 100644 index 79b3da8..0000000 --- a/src/mainboard/lenovo/t60/mainboard.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <arch/io.h> -#include <ec/lenovo/pmh7/pmh7.h> -#include <ec/acpi/ec.h> -#include <ec/lenovo/h8/h8.h> -#include <northbridge/intel/i945/i945.h> -#include <pc80/mc146818rtc.h> -#include <arch/x86/include/arch/acpigen.h> -#include <arch/interrupt.h> -#include <smbios.h> -#include <build.h> -#include <drivers/intel/gma/int15.h> -#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT - -static acpi_cstate_t cst_entries[] = { - { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, - { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, - { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, -}; - -int get_cst_entries(acpi_cstate_t **entries) -{ - *entries = cst_entries; - return ARRAY_SIZE(cst_entries); -} - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - -static void mainboard_init(device_t dev) -{ - struct southbridge_intel_i82801gx_config *config; - device_t dev0, idedev; - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); - - /* If we're resuming from suspend, blink suspend LED */ - dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); - if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) - ec_write(0x0c, 0xc7); - - idedev = dev_find_slot(0, PCI_DEVFN(0x1f,1)); - - if (!(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40)) { - /* legacy I/O connected */ - pmh7_ultrabay_power_enable(1); - ec_write(0x0c, 0x84); - } else if (idedev && idedev->chip_info && - h8_ultrabay_device_present()) { - config = idedev->chip_info; - config->ide_enable_primary = 1; - pmh7_ultrabay_power_enable(1); - ec_write(0x0c, 0x84); - } else { - pmh7_ultrabay_power_enable(0); - ec_write(0x0c, 0x04); - } - - /* set dock status led */ - ec_write(0x0c, 0x08); - ec_write(0x0c, inb(0x164c) & 8 ? 0x89 : 0x09); -} - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/t60/mptable.c b/src/mainboard/lenovo/t60/mptable.c deleted file mode 100644 index 744ef30..0000000 --- a/src/mainboard/lenovo/t60/mptable.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); - - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x11); /* HD Audio 0:1b.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x14); /* PCIe 0:1c.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x15); /* PCIe 0:1c.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x16); /* PCIe 0:1c.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x17); /* PCIe 0:1c.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x10); /* USB 0:1d.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x11); /* USB 0:1d.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x13); /* USB 0:1d.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x17); /* LPC 0:1f.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x10); /* IDE 0:1f.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x02, 0x02, 0x10); /* SATA 0:1f.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x06, (0x00 << 2) | 0x00, 0x02, 0x10); /* Cardbus 6:00.0 */ - - mptable_lintsrc(mc, isa_bus); - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c deleted file mode 100644 index f11b33e..0000000 --- a/src/mainboard/lenovo/t60/romstage.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// __PRE_RAM__ means: use "unsigned" for device, not a struct. - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <timestamp.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include "northbridge/intel/i945/i945.h" -#include "northbridge/intel/i945/raminit.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include "dock.h" - -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* T60 GPIO: - 6: LEGACYIO# - 7: BDC_PRESENCE# - 8: H8_WAKE# - 10: MDI_DETECT - 12: H8SCI# - 14: CPUSB# - 15: CPPE# - 25: MDC_KILL# - 27: EXC_PWR_CTRL - 28: EXC_AUX_CTRL - 35: CLKREQ_SATA# - 36: PLANARID0 - 37: PLANARID1 - 38: PLANARID2 - 39: PLANARID3 - */ - outl(0x1f48f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e0ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfbfefb7d, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100f0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000f1, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000300a3, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -} - -static void ich7_enable_lpc(void) -{ - // Enable Serial IRQ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); - // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210); - // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d); - - /* range 0x1600 - 0x167f */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c); - - /* range 0x15e0 - 0x10ef */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); - - /* range 0x1680 - 0x169f */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c); -} - -static void early_superio_config(void) -{ - int timeout = 100000; - device_t dev = PNP_DEV(0x2e, 3); - - pnp_write_config(dev, 0x29, 0xa0); - - while(!(pnp_read_config(dev, 0x29) & 0x10) && timeout--) - udelay(1000); - - /* Enable COM1 */ - pnp_set_logical_device(dev); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); - pnp_set_enable(dev, 1); -} - -static void rcba_config(void) -{ - /* Set up virtual channel 0 */ - RCBA32(0x0014) = 0x80000001; - RCBA32(0x001c) = 0x03128010; - - /* Device 1f interrupt pin register */ - RCBA32(0x3100) = 0x00001230; - RCBA32(0x3108) = 0x40004321; - - /* PCIe Interrupts */ - RCBA32(0x310c) = 0x00004321; - /* HD Audio Interrupt */ - RCBA32(0x3110) = 0x00000002; - - /* dev irq route register */ - RCBA16(0x3140) = 0x1007; - RCBA16(0x3142) = 0x0076; - RCBA16(0x3144) = 0x3210; - RCBA16(0x3146) = 0x7654; - RCBA16(0x3148) = 0x0010; - - /* Enable IOAPIC */ - RCBA8(0x31ff) = 0x03; - - /* Enable upper 128bytes of CMOS */ - RCBA32(0x3400) = (1 << 2); - - /* Disable unused devices */ - RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. - - /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ - RCBA32(0x1e84) = 0x00020001; - RCBA32(0x1e80) = 0x0000fe01; - - /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ - RCBA32(0x1e9c) = 0x000200f0; - RCBA32(0x1e98) = 0x000c0801; -} - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - RCBA32(0x0088) = 0x0011d000; - RCBA16(0x01fc) = 0x060f; - RCBA32(0x01f4) = 0x86000040; - RCBA32(0x0214) = 0x10030549; - RCBA32(0x0218) = 0x00020504; - RCBA8(0x0220) = 0xc5; - reg32 = RCBA32(0x3410); - reg32 |= (1 << 6); - RCBA32(0x3410) = reg32; - reg32 = RCBA32(0x3430); - reg32 &= ~(3 << 0); - reg32 |= (1 << 0); - RCBA32(0x3430) = reg32; - RCBA32(0x3418) |= (1 << 0); - RCBA16(0x0200) = 0x2008; - RCBA8(0x2027) = 0x0d; - RCBA16(0x3e08) |= (1 << 7); - RCBA16(0x3e48) |= (1 << 7); - RCBA32(0x3e0e) |= (1 << 7); - RCBA32(0x3e4e) |= (1 << 7); - - // next step only on ich7m b0 and later: - reg32 = RCBA32(0x2034); - reg32 &= ~(0x0f << 16); - reg32 |= (5 << 16); - RCBA32(0x2034) = reg32; -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 reg32; - int boot_mode = 0, dock_err; - int cbmem_was_initted; - const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 }; - - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - /* Force PCIRST# */ - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); - udelay(200 * 1000); - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); - - ich7_enable_lpc(); - - /* We want early GPIO setup, to be able to detect legacy I/O module */ - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); - /* Enable GPIOs */ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); - setup_ich7_gpios(); - - dock_err = dlpc_init(); - - /* We prefer Legacy I/O module over docking */ - if (legacy_io_present()) { - legacy_io_init(); - early_superio_config(); - } else if (!dock_err && dock_present()) { - dock_connect(); - early_superio_config(); - } - - /* Setup the console */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); - outb(0x6, 0xcf9); - while (1) asm("hlt"); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - i945_early_initialization(); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } - - /* Enable SPD ROMs and DDR-II DRAM */ - enable_smbus(); - -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 - dump_spd_registers(); -#endif - - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); - timestamp_add_now(TS_AFTER_INITRAM); - - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - /* Chipset Errata! */ - fixup_i945_errata(); - - /* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); - } -#endif - - timestamp_add_now(TS_END_ROMSTAGE); - -} diff --git a/src/mainboard/lenovo/t60/smi.h b/src/mainboard/lenovo/t60/smi.h deleted file mode 100644 index f8e8a7c..0000000 --- a/src/mainboard/lenovo/t60/smi.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_LENOVO_X60_SMI_H -#define MAINBOARD_LENOVO_X60_SMI_H - -#define SMI_DOCK_CONNECT 0x01 -#define SMI_DOCK_DISCONNECT 0x02 -#define SMI_BRIGHTNESS_UP 0x03 -#define SMI_BRIGHTNESS_DOWN 0x04 - -#endif diff --git a/src/mainboard/lenovo/t60/smihandler.c b/src/mainboard/lenovo/t60/smihandler.c deleted file mode 100644 index 130ad96..0000000 --- a/src/mainboard/lenovo/t60/smihandler.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/i82801gx/nvs.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include <ec/acpi/ec.h> -#include "dock.h" -#include "smi.h" - -#define LVTMA_BL_MOD_LEVEL 0x7af9 /* ATI Radeon backlight level */ -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 *bar; - if ((bar = (u8 *)pci_read_config32(PCI_DEV(1, 0, 0), 0x18))) { - printk(BIOS_DEBUG, "bar: %08X, level %02X\n", (unsigned int)bar, *(bar+LVTMA_BL_MOD_LEVEL)); - *(bar+LVTMA_BL_MOD_LEVEL) &= 0xf0; - if (*(bar+LVTMA_BL_MOD_LEVEL) > 0x10) - *(bar+LVTMA_BL_MOD_LEVEL) -= 0x10; - } -} - -static void mainboard_smi_brightness_up(void) -{ - u8 *bar; - if ((bar = (u8 *)pci_read_config32(PCI_DEV(1, 0, 0), 0x18))) { - printk(BIOS_DEBUG, "bar: %08X, level %02X\n", (unsigned int )bar, *(bar+LVTMA_BL_MOD_LEVEL)); - *(bar+LVTMA_BL_MOD_LEVEL) |= 0x0f; - if (*(bar+LVTMA_BL_MOD_LEVEL) < 0xf0) - *(bar+LVTMA_BL_MOD_LEVEL) += 0x10; - } -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - case SMI_DOCK_CONNECT: - /* If there's an legacy I/O module present, we're not - * allowed to connect the Docking LPC Bus, as both Super I/O - * chips are using 0x2e as base address. - */ - if (legacy_io_present()) - break; - - if (!dock_connect()) { - /* set dock LED to indicate status */ - ec_write(0x0c, 0x08); - ec_write(0x0c, 0x89); - } else { - /* blink dock LED to indicate failure */ - ec_write(0x0c, 0xc8); - ec_write(0x0c, 0x09); - } - break; - - case SMI_DOCK_DISCONNECT: - dock_disconnect(); - ec_write(0x0c, 0x09); - ec_write(0x0c, 0x08); - break; - - case SMI_BRIGHTNESS_UP: - mainboard_smi_brightness_up(); - break; - - case SMI_BRIGHTNESS_DOWN: - mainboard_smi_brightness_down(); - break; - - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch(event) { - /* brightness up */ - case 0x14: - mainboard_smi_brightness_up(); - break; - /* brightness down */ - case 0x15: - mainboard_smi_brightness_down(); - break; - /* Fn-F9 Key */ - case 0x18: - /* power loss */ - case 0x27: - /* undock event */ - case 0x50: - mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); - break; - /* dock event */ - case 0x37: - mainboard_io_trap_handler(SMI_DOCK_CONNECT); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi) -{ - if (gpi & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); - - if (!pmbase) - return 0; - - switch(data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - default: - break; - } - return 0; -} diff --git a/src/mainboard/lenovo/thinkpad_t520/Kconfig b/src/mainboard/lenovo/thinkpad_t520/Kconfig new file mode 100644 index 0000000..1908dee --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/Kconfig @@ -0,0 +1,80 @@ +if BOARD_LENOVO_THINKPAD_T520 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_RPGA988B + select NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_BD82X6X + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select INTEL_INT15 + select EARLY_CBMEM_INIT + select VGA + select INTEL_EDID + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select SANDYBRIDGE_LVDS + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config MAINBOARD_DIR + string + default lenovo/thinkpad_t520 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad T520" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 10 + +config VGA_BIOS_ID + string + default "8086,0126" + +config VGA_BIOS_FILE + string + default "pci8086,0126.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x17aa + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x21cf + +endif # BOARD_LENOVO_THINKPAD_T520 diff --git a/src/mainboard/lenovo/thinkpad_t520/Makefile.inc b/src/mainboard/lenovo/thinkpad_t520/Makefile.inc new file mode 100644 index 0000000..265059a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +romstage-y += gpio.c diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_t520/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_t520/acpi/gpe.asl new file mode 100644 index 0000000..80bee71 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi/gpe.asl @@ -0,0 +1,13 @@ + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP04.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP04.HPCS) + If (_SB.PCI0.RP04.PDC) + { + Store (0x01, _SB.PCI0.RP04.PDC) + Notify (_SB.PCI0.RP04, 0x00) + } + } + } diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_t520/acpi/platform.asl new file mode 100644 index 0000000..f937dc5 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi/platform.asl @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* ME may not be up yet. */ + Store (0, _TZ.MEB1) + Store (0, _TZ.MEB2) + + /* Not implemented. */ + Return(Package(){0,0}) +} diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_t520/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..b4b81a2 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P2IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P4IP EXC INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P5IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_t520/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/thinkpad_t520/acpi_tables.c b/src/mainboard/lenovo/thinkpad_t520/acpi_tables.c new file mode 100644 index 0000000..26a459d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/acpi_tables.c @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // the lid is open by default. + gnvs->lids = 1; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_t520/board_info.txt b/src/mainboard/lenovo/thinkpad_t520/board_info.txt new file mode 100644 index 0000000..9b98f05 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: WSON-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_t520/cmos.default b/src/mainboard/lenovo/thinkpad_t520/cmos.default new file mode 100644 index 0000000..137f482 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +touchpad=Enable +sata_mode=AHCI +fn_ctrl_swap=Disable +sticky_fn=Disable +trackpoint=Enable +hyper_threading=Enable +backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/thinkpad_t520/cmos.layout b/src/mainboard/lenovo/thinkpad_t520/cmos.layout new file mode 100644 index 0000000..825317f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/cmos.layout @@ -0,0 +1,166 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +415 1 e 1 wlan +416 1 e 1 trackpoint +417 1 e 1 fn_ctrl_swap +418 1 e 1 sticky_fn +#419 2 r 0 unused +421 1 e 9 sata_mode +422 2 e 10 backlight + +# coreboot config options: cpu +424 1 e 2 hyper_threading +#425 7 r 0 unused + +# coreboot config options: northbridge +432 3 e 11 gfx_uma_size +#435 549 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 Both +10 1 Keyboard only +10 2 Thinklight only +10 3 None +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/lenovo/thinkpad_t520/devicetree.cb b/src/mainboard/lenovo/thinkpad_t520/devicetree.cb new file mode 100644 index 0000000..c32e237 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/devicetree.cb @@ -0,0 +1,147 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "5" + register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms + register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms + register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "1" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "4" + register "gpu_cpu_backlight" = "0x1155" + register "gpu_pch_backlight" = "0x06100610" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA988B + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M] + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0000" + register "gpi1_routing" = "2" + register "gpi8_routing" = "2" + + # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock) + register "sata_port_map" = "0x1f" + # Set max SATA speed to 6.0 Gb/s + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x7c1601" + register "gen2_dec" = "0x0c15e1" + register "gen4_dec" = "0x0c06a1" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end + device pci 16.2 off end + device pci 16.3 off end + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 off end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4 Express Card + device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394 + device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY + device pci 1c.6 off end # PCIe Port #7 USB 3.0 only W520 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1f.0 on #LPC bridge + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa7" + register "config1" = "0x09" + register "config2" = "0xa0" + register "config3" = "0xc2" + + register "beepmask0" = "0x00" + register "beepmask1" = "0x86" + register "has_power_management_beeps" = "0" + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xd0" + register "event5_enable" = "0xfc" + register "event6_enable" = "0x00" + register "event7_enable" = "0x01" + register "event8_enable" = "0x7b" + register "event9_enable" = "0xff" + register "eventa_enable" = "0x01" + register "eventb_enable" = "0x00" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "evente_enable" = "0x0d" + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on # SMBUS controller + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end # SMBus + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_t520/dsdt.asl b/src/mainboard/lenovo/thinkpad_t520/dsdt.asl new file mode 100644 index 0000000..b6b4b33 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/dsdt.asl @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP04_IS_EXPRESSCARD 1 +#define EC_LENOVO_H8_ME_WORKAROUND 1 +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/lenovo/thinkpad_t520/fadt.c b/src/mainboard/lenovo/thinkpad_t520/fadt.c new file mode 100644 index 0000000..27e6303 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_t520/gpio.c b/src/mainboard/lenovo/thinkpad_t520/gpio.c new file mode 100644 index 0000000..a9b0f9e --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/gpio.c @@ -0,0 +1,309 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef T520_GPIO_H +#define T520_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, // -USB30_SMI - input + .gpio1 = GPIO_MODE_GPIO, // -EC_SCI - input + .gpio2 = GPIO_MODE_GPIO, // -LCD_PRESENCE - input + .gpio3 = GPIO_MODE_GPIO, // DOCKID0 - input + .gpio4 = GPIO_MODE_GPIO, // DOCKID1 - input + .gpio5 = GPIO_MODE_GPIO, // DOCKID2 - input + .gpio6 = GPIO_MODE_GPIO, // SYSTEM_DPCRT_HPD - input + .gpio7 = GPIO_MODE_GPIO, // -eSATA_CD - input + .gpio8 = GPIO_MODE_GPIO, // pulldown - INTEGRATED ENABLED(FCIM) 0 / DISABLED (BTM) 1 + .gpio9 = GPIO_MODE_NATIVE, // OC5 - -USB_PORT9_OC5 - input + .gpio10 = GPIO_MODE_GPIO, // DRAMRST_GATE_ON - output + .gpio11 = GPIO_MODE_NATIVE, // SMBALERT# pullup + .gpio12 = GPIO_MODE_NATIVE, // LANPHYPC - output + .gpio13 = GPIO_MODE_GPIO, // -EC_WAKE - input + .gpio14 = GPIO_MODE_NATIVE, // OC7 - pullup + .gpio15 = GPIO_MODE_GPIO, // pullup - ME CRYPTO STRAP WITH TLS CONFIDENTIALITY + .gpio16 = GPIO_MODE_NATIVE, // SATA4GP - SATA_DOCK_DTCT - input from gpio33 + .gpio17 = GPIO_MODE_GPIO, // DGFX_PW RGD - input + .gpio18 = GPIO_MODE_NATIVE, // PCIECLKRQ1 - -CLKREQ_WLAN_TR - input + .gpio19 = GPIO_MODE_NATIVE, // SATA1GP - SATA_BAY_DTCT - input to gpio22 + .gpio20 = GPIO_MODE_NATIVE, // PCIECLKRQ2 - pullup + .gpio21 = GPIO_MODE_GPIO, // -DISCRETE_GFX_PRESENCE - input + .gpio22 = GPIO_MODE_GPIO, // SATA_BAY_DTCT - output to SATA1GP + .gpio23 = GPIO_MODE_NATIVE, // LDRQ1 - nc + .gpio24 = GPIO_MODE_GPIO, // pullup + .gpio25 = GPIO_MODE_NATIVE, // PCIECLKRQ3 - -CLKREQ_EXC - input + .gpio26 = GPIO_MODE_NATIVE, // PCIECLKRQ4 - -CLKREQ_MCC_TR - input + .gpio27 = GPIO_MODE_GPIO, // -MSATA_DTCT - input + .gpio28 = GPIO_MODE_GPIO, // pullup possible + .gpio29 = GPIO_MODE_GPIO, // SLP_LAN - -PCH_SLP_LAN - output + .gpio30 = GPIO_MODE_NATIVE, // SUSPWRDNACK - output + .gpio31 = GPIO_MODE_NATIVE, // ACPRESENT - input +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_LOW, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_LOW, + .gpio7 = GPIO_LEVEL_LOW, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_LOW, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio18 = GPIO_NO_BLINK, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, // CLKRUN - output + .gpio33 = GPIO_MODE_GPIO, // SATA_DOCK_DTCT - output to SATA4GP + .gpio34 = GPIO_MODE_GPIO, // VRAM_SIZE_ID - input - HIGH: 1GB / LOW: 2GB + .gpio35 = GPIO_MODE_GPIO, // ESATA_DTCT to SATA3GP + .gpio36 = GPIO_MODE_GPIO, // pulldown + .gpio37 = GPIO_MODE_NATIVE, // SATA3GP - ESATA_DTCT to GPIO 34 + .gpio38 = GPIO_MODE_GPIO, // planarid2 - input + .gpio39 = GPIO_MODE_GPIO, // planarid3 - input + .gpio40 = GPIO_MODE_NATIVE, // OC1 - -USB_PORT1_OC1 - input + .gpio41 = GPIO_MODE_GPIO, // OC2 -MDC_KILL + .gpio42 = GPIO_MODE_GPIO, // SMB_3B_EN - output + .gpio43 = GPIO_MODE_NATIVE, // OC4 - pullup + .gpio44 = GPIO_MODE_NATIVE, // PCIECLKRQ5 - -CLKREQ_GBE - input + .gpio45 = GPIO_MODE_NATIVE, // PCIECLKRQ6 - -CLKREQ_USB30_TR - input + .gpio46 = GPIO_MODE_NATIVE, // PCIECLKRQ7 - pullup + .gpio47 = GPIO_MODE_NATIVE, // PEG_A_CLKRQ# - input + .gpio48 = GPIO_MODE_GPIO, // planarid0 - input + .gpio49 = GPIO_MODE_GPIO, // planarid1 - input + .gpio50 = GPIO_MODE_GPIO, // -SC_DTCT - input + .gpio51 = GPIO_MODE_GPIO, // pullup + .gpio52 = GPIO_MODE_GPIO, // OPTIMUS_ENABLE - output - high: igpu / low: dgpu + .gpio53 = GPIO_MODE_GPIO, // pullup + .gpio54 = GPIO_MODE_GPIO, // -BDC_PRESENCE - input + .gpio55 = GPIO_MODE_GPIO, // pullup + .gpio56 = GPIO_MODE_NATIVE, // PEG_B_CLKRQ - pullup + .gpio57 = GPIO_MODE_GPIO, // -DTPM_PRESENCE - input + .gpio58 = GPIO_MODE_NATIVE, // SML1CLK - EC_SCL2 - output + .gpio59 = GPIO_MODE_NATIVE, // OC0 - pullup + .gpio60 = GPIO_MODE_NATIVE, // SML0ALERT# - pullup + .gpio61 = GPIO_MODE_NATIVE, // SUS_STAT - output + .gpio62 = GPIO_MODE_NATIVE, // SUSCLK - output + .gpio63 = GPIO_MODE_NATIVE, // SLP_S5 - output +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_OUTPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_LOW, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, // NC + .gpio65 = GPIO_MODE_NATIVE, // NC + .gpio66 = GPIO_MODE_NATIVE, // NC + .gpio67 = GPIO_MODE_NATIVE, // NC + .gpio68 = GPIO_MODE_GPIO, // -INT_MIC_DTCT - input + .gpio69 = GPIO_MODE_GPIO, // mic enable bit - low enable - pulldown + .gpio70 = GPIO_MODE_GPIO, // -WWAN_DTCT - input + .gpio71 = GPIO_MODE_GPIO, // -USB_SUBCARD_DTCT - input + .gpio72 = GPIO_MODE_NATIVE, // BATLOW - input + .gpio73 = GPIO_MODE_NATIVE, // pullup + .gpio74 = GPIO_MODE_NATIVE, // pullup + .gpio75 = GPIO_MODE_NATIVE, // SML1DATA - EC_SDA2 - i/o +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_HIGH, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + .blink = &pch_gpio_set1_blink, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/lenovo/thinkpad_t520/hda_verb.c b/src/mainboard/lenovo/thinkpad_t520/hda_verb.c new file mode 100644 index 0000000..694ccdd --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/hda_verb.c @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Vendor Name : Conexant + * Vendor ID : 0x14f1506e + * Subsystem ID : 0x17aa21cf + * Revision ID : 0x100000 + */ + + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x14f1506e, // Codec Vendor / Device ID: Conexant CX20590 - Schematic shows CX20672 + 0x17aa21cf, // Subsystem ID + 0x0000000d, // Number of 4 dword sets + +/* Bits 31:28 - Codec Address */ +/* Bits 27:20 - NID */ +/* Bits 19:8 - Verb ID */ +/* Bits 7:0 - Payload */ + +/* NID 0x01 - NodeInfo */ + AZALIA_SUBVENDOR(0x0, 0x17AA21CF), + + AZALIA_PIN_CFG(0x0, 0x19, 0x04211040), + AZALIA_PIN_CFG(0x0, 0x1A, 0x61A19050), + AZALIA_PIN_CFG(0x0, 0x1B, 0x04A11060), + AZALIA_PIN_CFG(0x0, 0x1C, 0x6121401F), + AZALIA_PIN_CFG(0x0, 0x1D, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x1F, 0x90170110), + AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x23, 0x90A60170), + + /* Misc entries */ + 0x00B707C0, /* Enable PortB as Output with HP amp */ + 0x00D70740, /* Enable PortD as Output */ + 0x0017A200, /* Disable ClkEn of PortSenseTst */ + 0x0017C621, /* Slave Port - Port A used as microphone input for + combo Jack + Master Port - Port B used for Jack Presence Detect + Enable Combo Jack Detection */ + 0x0017A208, /* Enable ClkEn of PortSenseTst */ + 0x00170500, /* Set power state to D0 */ + 0x00170500, /* Padding */ + 0x00170500, /* Padding */ +}; + +const u32 pc_beep_verbs[] = { + 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_t520/mainboard.c b/src/mainboard/lenovo/thinkpad_t520/mainboard.c new file mode 100644 index 0000000..387bbe0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/mainboard.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 Google Inc. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <cbfs.h> +#include <pc80/keyboard.h> +#include <ec/lenovo/h8/h8.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +static void mainboard_init(device_t dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + + pc_keyboard_init(); + + /* Enable expresscard hotplug events. */ + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0xd8, + pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) + | (1 << 30)); + pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0x42, 0x142); +} + +/* mainboard_enable is executed as first thing after +enumerate_buses(). */ +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +void h8_mainboard_init_dock (void) +{ + return; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_t520/romstage.c b/src/mainboard/lenovo/thinkpad_t520/romstage.c new file mode 100644 index 0000000..83be0c7 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/romstage.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <northbridge/intel/sandybridge/raminit_native.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/gpio.h> +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + /* T520 EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xac, + 0x80010000); +} + +void rcba_config(void) +{ + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P2IP WLAN INTA -> PIRQB + * D28IP_P4IP EXC INTB -> PIRQF + * D28IP_P5IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P2IP) | (INTB << D28IP_P4IP) | + (INTC << D28IP_P5IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + RCBA32(FD) = 0x1ee51fe3; + RCBA32(BUC) = 0; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, /* P0 left dual conn, OC 0 */ + { 1, 1, 1 }, /* P1 system onboard USB port (eSATA), (EHCI debug), OC 1 */ + { 1, 2, -1 }, /* P2: wimax / WLAN */ + { 1, 1, -1 }, /* P3: WWAN, no OC */ + { 1, 1, -1 }, /* P4: smartcard, no OC */ + { 1, 1, -1 }, /* P5: ExpressCard, no OC */ + { 0, 2, -1 }, /* P6: empty */ + { 0, 2, -1 }, /* P7: to touch panel, no OC */ + { 1, 1, 4 }, /* P8: left dual conn, OC4 */ + { 1, 4, 5 }, /* P9: to system subcard back right, (EHCI debug), OC 5 */ + { 1, 1, -1 }, /* P10: fingerprint reader, no OC */ + { 1, 2, -1 }, /* P11: bluetooth, no OC. */ + { 1, 1, -1 }, /* P12: docking, no OC */ + { 1, 1, -1 }, /* P13: CAMERA (LCD), no OC */ +}; + +void mainboard_get_spd(spd_raw_data *spd) { + read_spd (&spd[0], 0x50); + read_spd (&spd[2], 0x51); +} diff --git a/src/mainboard/lenovo/thinkpad_t520/smihandler.c b/src/mainboard/lenovo/thinkpad_t520/smihandler.c new file mode 100644 index 0000000..c81825e --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/smihandler.c @@ -0,0 +1,189 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 0; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + case 0x14: + /* brightness up */ + mainboard_smi_brightness_up(); + break; + case 0x15: + /* brightness down */ + mainboard_smi_brightness_down(); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + default: + break; + } + return 0; +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ == 3) { + u8 ec_wake = ec_read(0x32); + /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ + if (ec_wake & 0x14) { + u32 gpe_rout; + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* Enable EC WAKE GPE. */ + outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); + gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); + /* Redirect EC WAKE GPE to SCI. */ + gpe_rout &= ~(3 << 26); + gpe_rout |= (2 << 26); + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_t520/thermal.h b/src/mainboard/lenovo/thinkpad_t520/thermal.h new file mode 100644 index 0000000..23bdb76 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t520/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef T520_THERMAL_H +#define T520_THERMAL_H + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif /* T520_THERMAL_H */ diff --git a/src/mainboard/lenovo/thinkpad_t530/Kconfig b/src/mainboard/lenovo/thinkpad_t530/Kconfig new file mode 100644 index 0000000..1ad7232 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/Kconfig @@ -0,0 +1,77 @@ +if BOARD_LENOVO_THINKPAD_T530 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_C216 + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select BOARD_ROMSIZE_KB_12288 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select INTEL_INT15 + select EARLY_CBMEM_INIT + select VGA + select INTEL_EDID + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select IVYBRIDGE_LVDS + select MAINBOARD_DO_NATIVE_VGA_INIT # default to native vga init + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config MAINBOARD_DIR + string + default lenovo/thinkpad_t530 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad T530" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 10 + +config VGA_BIOS_FILE + string + default "pci8086,0106.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x17aa + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x21fa + +endif # BOARD_LENOVO_THINKPAD_T530 diff --git a/src/mainboard/lenovo/thinkpad_t530/Makefile.inc b/src/mainboard/lenovo/thinkpad_t530/Makefile.inc new file mode 100644 index 0000000..265059a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +romstage-y += gpio.c diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_t530/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_t530/acpi/gpe.asl new file mode 100644 index 0000000..eb489d5 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi/gpe.asl @@ -0,0 +1,13 @@ + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP03.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP03.HPCS) + If (_SB.PCI0.RP03.PDC) + { + Store (0x01, _SB.PCI0.RP03.PDC) + Notify (_SB.PCI0.RP03, 0x00) + } + } + } diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_t530/acpi/platform.asl new file mode 100644 index 0000000..72b9dbf --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi/platform.asl @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* ME may not be up yet. */ + Store (0, _TZ.MEB1) + Store (0, _TZ.MEB2) + + /* Not implemented. */ + Return(Package(){0,0}) +} diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_t530/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_t530/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/thinkpad_t530/acpi_tables.c b/src/mainboard/lenovo/thinkpad_t530/acpi_tables.c new file mode 100644 index 0000000..26a459d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/acpi_tables.c @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // the lid is open by default. + gnvs->lids = 1; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_t530/board_info.txt b/src/mainboard/lenovo/thinkpad_t530/board_info.txt new file mode 100644 index 0000000..689ca8f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_t530/cmos.default b/src/mainboard/lenovo/thinkpad_t530/cmos.default new file mode 100644 index 0000000..137f482 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +touchpad=Enable +sata_mode=AHCI +fn_ctrl_swap=Disable +sticky_fn=Disable +trackpoint=Enable +hyper_threading=Enable +backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/thinkpad_t530/cmos.layout b/src/mainboard/lenovo/thinkpad_t530/cmos.layout new file mode 100644 index 0000000..825317f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/cmos.layout @@ -0,0 +1,166 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +415 1 e 1 wlan +416 1 e 1 trackpoint +417 1 e 1 fn_ctrl_swap +418 1 e 1 sticky_fn +#419 2 r 0 unused +421 1 e 9 sata_mode +422 2 e 10 backlight + +# coreboot config options: cpu +424 1 e 2 hyper_threading +#425 7 r 0 unused + +# coreboot config options: northbridge +432 3 e 11 gfx_uma_size +#435 549 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 Both +10 1 Keyboard only +10 2 Thinklight only +10 3 None +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/lenovo/thinkpad_t530/devicetree.cb b/src/mainboard/lenovo/thinkpad_t530/devicetree.cb new file mode 100644 index 0000000..b44623b --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/devicetree.cb @@ -0,0 +1,153 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms + register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms + register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms + register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "1" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "1" + register "gpu_cpu_backlight" = "0x1155" + register "gpu_pch_backlight" = "0x11551155" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on end # host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0000" + register "gpi1_routing" = "2" + register "gpi8_routing" = "2" + + # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock) + register "sata_port_map" = "0x3f" + # Set max SATA speed to 6.0 Gb/s + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x7c1601" + register "gen2_dec" = "0x0c15e1" + register "gen4_dec" = "0x0c06a1" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 14.0 on end # USB 3.0 Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 + device pci 1c.2 on end # PCIe Port #3 (expresscard) + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on #LPC bridge + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa7" + register "config1" = "0x09" + register "config2" = "0xa0" + register "config3" = "0xc2" + + register "has_keyboard_backlight" = "1" + + register "beepmask0" = "0x00" + register "beepmask1" = "0x86" + register "has_power_management_beeps" = "0" + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xd0" + register "event5_enable" = "0xfc" + register "event6_enable" = "0x00" + register "event7_enable" = "0x01" + register "event8_enable" = "0x7b" + register "event9_enable" = "0xff" + register "eventa_enable" = "0x01" + register "eventb_enable" = "0x00" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "evente_enable" = "0x0d" + end + end # LPC bridge + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on end # Thermal + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_t530/dsdt.asl b/src/mainboard/lenovo/thinkpad_t530/dsdt.asl new file mode 100644 index 0000000..c73f795 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/dsdt.asl @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP03_IS_EXPRESSCARD 1 +#define EC_LENOVO_H8_ME_WORKAROUND 1 +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/lenovo/thinkpad_t530/fadt.c b/src/mainboard/lenovo/thinkpad_t530/fadt.c new file mode 100644 index 0000000..27e6303 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_t530/gpio.c b/src/mainboard/lenovo/thinkpad_t530/gpio.c new file mode 100644 index 0000000..32e0e17 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/gpio.c @@ -0,0 +1,345 @@ +#include "southbridge/intel/bd82x6x/gpio.h" +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_LOW, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_LOW, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_LOW, + .gpio18 = GPIO_LEVEL_LOW, + .gpio19 = GPIO_LEVEL_LOW, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_LOW, + .gpio22 = GPIO_LEVEL_LOW, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_NO_INVERT, + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_NO_INVERT, + .gpio3 = GPIO_NO_INVERT, + .gpio4 = GPIO_NO_INVERT, + .gpio5 = GPIO_NO_INVERT, + .gpio6 = GPIO_NO_INVERT, + .gpio7 = GPIO_NO_INVERT, + .gpio8 = GPIO_NO_INVERT, + .gpio9 = GPIO_NO_INVERT, + .gpio10 = GPIO_NO_INVERT, + .gpio11 = GPIO_NO_INVERT, + .gpio12 = GPIO_NO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_NO_INVERT, + .gpio15 = GPIO_NO_INVERT, + .gpio16 = GPIO_NO_INVERT, + .gpio17 = GPIO_NO_INVERT, + .gpio18 = GPIO_NO_INVERT, + .gpio19 = GPIO_NO_INVERT, + .gpio20 = GPIO_NO_INVERT, + .gpio21 = GPIO_NO_INVERT, + .gpio22 = GPIO_NO_INVERT, + .gpio23 = GPIO_NO_INVERT, + .gpio24 = GPIO_NO_INVERT, + .gpio25 = GPIO_NO_INVERT, + .gpio26 = GPIO_NO_INVERT, + .gpio27 = GPIO_NO_INVERT, + .gpio28 = GPIO_NO_INVERT, + .gpio29 = GPIO_NO_INVERT, + .gpio30 = GPIO_NO_INVERT, + .gpio31 = GPIO_NO_INVERT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio0 = GPIO_NO_BLINK, + .gpio1 = GPIO_NO_BLINK, + .gpio2 = GPIO_NO_BLINK, + .gpio3 = GPIO_NO_BLINK, + .gpio4 = GPIO_NO_BLINK, + .gpio5 = GPIO_NO_BLINK, + .gpio6 = GPIO_NO_BLINK, + .gpio7 = GPIO_NO_BLINK, + .gpio8 = GPIO_NO_BLINK, + .gpio9 = GPIO_NO_BLINK, + .gpio10 = GPIO_NO_BLINK, + .gpio11 = GPIO_NO_BLINK, + .gpio12 = GPIO_NO_BLINK, + .gpio13 = GPIO_NO_BLINK, + .gpio14 = GPIO_NO_BLINK, + .gpio15 = GPIO_NO_BLINK, + .gpio16 = GPIO_NO_BLINK, + .gpio17 = GPIO_NO_BLINK, + .gpio18 = GPIO_NO_BLINK, + .gpio19 = GPIO_NO_BLINK, + .gpio20 = GPIO_NO_BLINK, + .gpio21 = GPIO_NO_BLINK, + .gpio22 = GPIO_NO_BLINK, + .gpio23 = GPIO_NO_BLINK, + .gpio24 = GPIO_NO_BLINK, + .gpio25 = GPIO_NO_BLINK, + .gpio26 = GPIO_NO_BLINK, + .gpio27 = GPIO_NO_BLINK, + .gpio28 = GPIO_NO_BLINK, + .gpio29 = GPIO_NO_BLINK, + .gpio30 = GPIO_NO_BLINK, + .gpio31 = GPIO_NO_BLINK, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_GPIO, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_OUTPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_HIGH, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, + .gpio65 = GPIO_DIR_INPUT, + .gpio66 = GPIO_DIR_INPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_HIGH, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; diff --git a/src/mainboard/lenovo/thinkpad_t530/hda_verb.c b/src/mainboard/lenovo/thinkpad_t530/hda_verb.c new file mode 100644 index 0000000..bd176c1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/hda_verb.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Vendor Name : IDT + * Vendor ID : 0x10ec0269 + * Subsystem ID : 0x17aa21fa + * Revision ID : 0x100303 + */ + + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269VC + 0x17aa21fa, // Subsystem ID + 0x00000012, // Number of 4 dword sets + +/* Bits 31:28 - Codec Address */ +/* Bits 27:20 - NID */ +/* Bits 19:8 - Verb ID */ +/* Bits 7:0 - Payload */ + +/* NID 0x01 - NodeInfo */ + AZALIA_SUBVENDOR(0x0, 0x17AA21FA), + +/* NID 0x0A - External Microphone Connector + * Config=0x04A11020 (External,Right; MicIn,3.5mm; Black,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0A, 0x04A11020), + +/* NID 0x0B - Headphone Connector + * Config=0x0421101F (External,Right; HP,3.5mm; Black,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0B, 0x0421101F), + +/* NID 0x0C - Not connected + * Config=0x40F000F0 (N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0C, 0x40F000F0), + +/* NID 0x0D - Internal Speakers + * Config=0x90170110 (Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0D, 0x90170110), + +/* NID 0x0F - Not connected + * Config=0x40F000F0 + */ + AZALIA_PIN_CFG(0x0, 0x0F, 0x40F000F0), + +/* NID 0x11 - Internal Microphone + * Config=0xD5A30140 (Fixed internal,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x11, 0xD5A30140), + AZALIA_PIN_CFG(0x0, 0x12, 0x90A60140), + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0x0, 0x15, 0x03211020), + AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), + AZALIA_PIN_CFG(0x0, 0x19, 0x411111F0), + + 0x01970804, + 0x01870803, + 0x01470740, + 0x00970600, + + AZALIA_PIN_CFG(0x0, 0x1A, 0x411111F0), + AZALIA_PIN_CFG(0x0, 0x1D, 0x40138205), + AZALIA_PIN_CFG(0x0, 0x1E, 0x411111F0), + + /* Misc entries */ + 0x00370600, + 0x00270600, + 0x00B707C0, /* Enable PortB as Output with HP amp */ + 0x00D70740, /* Enable PortD as Output */ + 0x0017A200, /* Disable ClkEn of PortSenseTst */ + 0x0017C621, /* Slave Port - Port A used as microphone input for + combo Jack + Master Port - Port B used for Jack Presence Detect + Enable Combo Jack Detection */ + 0x0017A208, /* Enable ClkEn of PortSenseTst */ + 0x00170500, /* Set power state to D0 */ + + /* --- Next Codec --- */ + +/* Vendor Name : Intel + * Vendor ID : 0x80862806 + * Subsystem ID : 0x80860101 + * Revision ID : 0x100000 + */ + /* coreboot specific header */ + 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of IDs + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[] = { + 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_t530/mainboard.c b/src/mainboard/lenovo/thinkpad_t530/mainboard.c new file mode 100644 index 0000000..f8c9dae --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/mainboard.c @@ -0,0 +1,85 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 Google Inc. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <cbfs.h> +#include <pc80/keyboard.h> +#include <ec/lenovo/h8/h8.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + + + +static void mainboard_init(device_t dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + + /* This sneaked in here, because X201 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(); + + /* Enable expresscard hotplug events. */ + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), + 0xd8, + pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), 0xd8) + | (1 << 30)); + pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), + 0x42, 0x142); +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +void h8_mainboard_init_dock (void) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_t530/romstage.c b/src/mainboard/lenovo/thinkpad_t530/romstage.c new file mode 100644 index 0000000..115f83b --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/romstage.c @@ -0,0 +1,117 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" + +void pch_enable_lpc(void) +{ + /* X230 EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xac, + 0x80010000); +} + +void rcba_config(void) +{ + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + RCBA32(FD) = 0x17f81fe3; + RCBA32(BUC) = 0; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 1, 0 }, + { 1, 1, 1 }, + { 1, 2, 3 }, + { 1, 1, -1 }, + { 1, 1, -1 }, + { 1, 0, -1 }, + { 0, 0, -1 }, + { 1, 2, -1 }, + { 1, 0, -1 }, + { 1, 1, 5 }, + { 1, 0, -1 }, + { 1, 0, -1 }, + { 1, 3, -1 }, + { 1, 1, -1 }, +}; + +void mainboard_get_spd(spd_raw_data *spd) { + read_spd (&spd[0], 0x50); + read_spd (&spd[2], 0x51); +} diff --git a/src/mainboard/lenovo/thinkpad_t530/smihandler.c b/src/mainboard/lenovo/thinkpad_t530/smihandler.c new file mode 100644 index 0000000..5bcde1c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/smihandler.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + case 0x14: + /* brightness up */ + mainboard_smi_brightness_up(); + break; + case 0x15: + /* brightness down */ + mainboard_smi_brightness_down(); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + default: + break; + } + return 0; +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ == 3) { + u8 ec_wake = ec_read(0x32); + /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ + if (ec_wake & 0x14) { + u32 gpe_rout; + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* Enable EC WAKE GPE. */ + outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); + gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); + /* Redirect EC WAKE GPE to SCI. */ + gpe_rout &= ~(3 << 26); + gpe_rout |= (2 << 26); + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_t530/thermal.h b/src/mainboard/lenovo/thinkpad_t530/thermal.h new file mode 100644 index 0000000..2fafcde --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t530/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef T530_THERMAL_H +#define T530_THERMAL_H + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif /* T530_THERMAL_H */ diff --git a/src/mainboard/lenovo/thinkpad_t60/Kconfig b/src/mainboard/lenovo/thinkpad_t60/Kconfig new file mode 100644 index 0000000..69eca5a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/Kconfig @@ -0,0 +1,58 @@ +if BOARD_LENOVO_THINKPAD_T60 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_MFCPGA478 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GM + select SOUTHBRIDGE_INTEL_I82801GX + select SUPERIO_NSC_PC87382 + select SUPERIO_NSC_PC87384 + select SOUTHBRIDGE_TI_PCI1X2X + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select DRIVERS_ICS_954309 + select HAVE_OPTION_TABLE + select INTEL_INT15 + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_2048 + select CHANNEL_XOR_RANDOMIZATION + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select H8_DOCK_EARLY_INIT + select HAVE_CMOS_DEFAULT +config MAINBOARD_DIR + string + default lenovo/thinkpad_t60 + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad T60" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 2 + +config SEABIOS_PS2_TIMEOUT + int + default 3000 + +endif diff --git a/src/mainboard/lenovo/thinkpad_t60/Makefile.inc b/src/mainboard/lenovo/thinkpad_t60/Makefile.inc new file mode 100644 index 0000000..5e09e99 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c +romstage-y += dock.c diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/dock.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/dock.asl new file mode 100644 index 0000000..ba50609 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/dock.asl @@ -0,0 +1,98 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Scope (_SB) +{ + OperationRegion (DLPC, SystemIO, 0x164c, 1) + Field(DLPC, ByteAcc, NoLock, Preserve) + { + , 3, + DSTA, 1, + } + + Device(DOCK) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_DCK, 1, NotSerialized) + { + if (Arg0) { + Sleep(250) + /* connect dock */ + TRAP(SMI_DOCK_CONNECT) + } else { + /* disconnect dock */ + TRAP(SMI_DOCK_DISCONNECT) + } + + Xor(Arg0, DSTA, Local0) + Return (Local0) + } + + Method(_STA, 0, NotSerialized) + { + Return (DSTA) + } + } +} + +Scope(_SB.PCI0.LPCB.EC) +{ + OperationRegion(PMH7, SystemIO, 0x15e0, 0x10) + Field(PMH7, ByteAcc, NoLock, Preserve) + { + Offset(0x0c), + PIDX, 8, + Offset(0x0e), + PDAT, 8, + } + + IndexField(PIDX, PDAT, ByteAcc, NoLock, Preserve) + { + Offset (0x61), + DPWR, 1, + } + + Method(_Q18, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q37, 0, NotSerialized) + { + if (DPWR) { + Notify(_SB.DOCK, 0) + } else { + Notify(_SB.DOCK, 3) + } + } + + Method(_Q50, 0, NotSerialized) + { + if (_SB.DOCK._STA()) { + Notify(_SB.DOCK, 1) + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/ec.asl new file mode 100644 index 0000000..a92bc4a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/ec.asl @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/gpe.asl new file mode 100644 index 0000000..b160b50 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/gpe.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" +Scope (_GPE) +{ + Method(_L18, 0, NotSerialized) + { + /* Read EC register to clear wake status */ + Store(_SB.PCI0.LPCB.EC.WAKE, Local0) + } +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/i945_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/i945_pci_irqs.asl new file mode 100644 index 0000000..e834ae1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/i945_pci_irqs.asl @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x10 } // SATA + }) + } Else { + Return (Package() { + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 } // SATA + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/ich7_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..548996c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/ich7_pci_irqs.asl @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x16 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } + }) + } Else { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } + }) +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/mainboard.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/mainboard.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/platform.asl new file mode 100644 index 0000000..ddb8ff3 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/platform.asl @@ -0,0 +1,205 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + _SB.PCI0.LPCB.EC.MUTE(1) + _SB.PCI0.LPCB.EC.USBP(0) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} + +// Power notification + +External (_PR_.CPU0, DeviceObj) +External (_PR_.CPU1, DeviceObj) + +Method (PNOT) +{ + If (MPEN) { + If(And(PDC0, 0x08)) { + Notify (_PR_.CPU0, 0x80) // _PPC + + If (And(PDC0, 0x10)) { + Sleep(100) + Notify(_PR_.CPU0, 0x81) // _CST + } + } + + If(And(PDC1, 0x08)) { + Notify (_PR_.CPU1, 0x80) // _PPC + If (And(PDC1, 0x10)) { + Sleep(100) + Notify(_PR_.CPU1, 0x81) // _CST + } + } + + } Else { // UP + Notify (_PR_.CPU0, 0x80) + Sleep(0x64) + Notify(_PR_.CPU0, 0x81) + } + + // Notify the Batteries + Notify(_SB.PCI0.LPCB.EC.BAT0, 0x80) // Execute BAT1 _BST + Notify(_SB.PCI0.LPCB.EC.BAT1, 0x80) // Execute BAT2 _BST +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + // TRAP(71) // TODO + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + /* Linux answers _OSI with "True" for a couple of + * Windows version queries. But unlike Windows it + * needs a Video repost, so let's determine whether + * we're running Linux. + */ + + If (_OSI("Linux")) { + Store (1, LINX) + } + + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + } + + /* And the OS workarounds start right after we know what we're + * running: Windows XP SP1 needs to have C-State coordination + * enabled in SMM. + */ + If (LAnd(LEqual(OSYS, 2001), MPEN)) { + // TRAP(61) // TODO + } + + /* SMM power state and C4-on-C3 settings need to be updated */ + // TRAP(43) // TODO + } +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi/video.asl b/src/mainboard/lenovo/thinkpad_t60/acpi/video.asl new file mode 100644 index 0000000..9a458e9 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi/video.asl @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Device (DSPC) +{ + Name (_ADR, 0x00020001) + OperationRegion (DSPC, PCI_Config, 0x00, 0x100) + Field (DSPC, ByteAcc, NoLock, Preserve) + { + Offset (0xf4), + BRTC, 8 + } + + Method(BRTD, 0, NotSerialized) + { + Trap(SMI_BRIGHTNESS_DOWN) + Store(BRTC, Local0) + if (LGreater (Local0, 15)) + { + Subtract(Local0, 16, Local0) + Store(Local0, BRTC) + } + } + + Method(BRTU, 0, NotSerialized) + { + Trap(SMI_BRIGHTNESS_UP) + Store (BRTC, Local0) + if (LLess(Local0, 0xff)) + { + Add (Local0, 16, Local0) + Store(Local0, BRTC) + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_t60/acpi_tables.c b/src/mainboard/lenovo/thinkpad_t60/acpi_tables.c new file mode 100644 index 0000000..ada7d08 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/acpi_tables.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include "southbridge/intel/i82801gx/nvs.h" +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); + + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_t60/board_info.txt b/src/mainboard/lenovo/thinkpad_t60/board_info.txt new file mode 100644 index 0000000..f7b8c63 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/board_info.txt @@ -0,0 +1,6 @@ +Board name: T60/T60p +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/lenovo/thinkpad_t60/cmos.default b/src/mainboard/lenovo/thinkpad_t60/cmos.default new file mode 100644 index 0000000..6adf85d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/cmos.default @@ -0,0 +1,21 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +hyper_threading=Enable +nmi=Enable +boot_devices='' +boot_default=0x41 +cmos_defaults_loaded=Yes +lpt=Enable +touchpad=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wlan=Enable +wwan=Enable +trackpoint=Enable +fn_ctrl_swap=Disable +sticky_fn=Disable +power_management_beeps=Enable +low_battery_beep=Enable diff --git a/src/mainboard/lenovo/thinkpad_t60/cmos.layout b/src/mainboard/lenovo/thinkpad_t60/cmos.layout new file mode 100644 index 0000000..4761696 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/cmos.layout @@ -0,0 +1,159 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +#409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default +936 1 e 8 cmos_defaults_loaded +937 1 e 1 lpt +#938 46 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ram initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +1060 1 e 1 touchpad +1061 1 e 1 bluetooth +1062 1 e 1 wwan +1063 1 e 1 wlan +1064 8 h 0 volume +1072 1 e 9 first_battery +1073 1 e 1 trackpoint +1074 1 e 1 fn_ctrl_swap +1075 1 e 1 sticky_fn +1076 1 e 1 power_management_beeps +1077 1 e 1 low_battery_beep +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 No +8 1 Yes +9 0 Secondary +9 1 Primary +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/lenovo/thinkpad_t60/devicetree.cb b/src/mainboard/lenovo/thinkpad_t60/devicetree.cb new file mode 100644 index 0000000..f092380 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/devicetree.cb @@ -0,0 +1,230 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/i945 + + device cpu_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x17aa 0x2015 + end + device pci 01.0 on # PCI-e + device pci 00.0 on # VGA + subsystemid 0x17aa 0x20a4 + end + end + + device pci 02.0 on # GMA Graphics controller + subsystemid 0x17aa 0x201a + end + device pci 02.1 on # display controller + subsystemid 0x17aa 0x201a + end + + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "2" + register "gpi12_routing" = "2" + register "gpi8_routing" = "2" + + register "sata_ahci" = "0x1" + register "sata_ports_implemented" = "0x01" + + register "gpe0_en" = "0x11000006" + register "alt_gp_smi_en" = "0x1000" + + register "c4onc3_enable" = "1" + + device pci 1b.0 on # Audio Controller + subsystemid 0x17aa 0x2010 + end + device pci 1c.0 on # Ethernet + subsystemid 0x17aa 0x2001 + end + device pci 1c.1 on end # WLAN + device pci 1d.0 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.1 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.2 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.3 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.7 on # USB2 EHCI + subsystemid 0x17aa 0x200b + end + device pci 1e.0 on # PCI Bridge + chip southbridge/ti/pci1x2x + device pci 00.0 on + subsystemid 0x17aa 0x2012 + end + register "scr" = "0x0844d070" + register "mrr" = "0x01d01002" + + end + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x17aa 0x2009 + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + + register "config0" = "0xa6" + register "config1" = "0x05" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + register "has_power_management_beeps" = "1" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3f" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "eventc_enable" = "0x3c" + + end + chip superio/nsc/pc87382 + device pnp 164e.2 on # IR + io 0x60 = 0x2f8 + end + + device pnp 164e.3 off # Serial Port + io 0x60 = 0x3f8 + end + + device pnp 164e.7 on # GPIO + io 0x60 = 0x1680 + end + + device pnp 164e.19 on # DLPC + io 0x60 = 0x164c + end + end + + chip superio/nsc/pc87384 + device pnp 2e.0 off #FDC + end + + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x3bc + irq 0x70 = 7 + end + + device pnp 2e.2 off # Serial Port / IR + io 0x60 = 0x2f8 + irq 0x70 = 4 + end + + device pnp 2e.3 on # Serial Port + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.7 on # GPIO + io 0x60 = 0x1620 + end + + device pnp 2e.a off # WDT + end + end + end + device pci 1f.1 on # IDE + subsystemid 0x17aa 0x200c + end + device pci 1f.2 on # SATA + subsystemid 0x17aa 0x200d + end + device pci 1f.3 on # SMBUS + subsystemid 0x17aa 0x200f + chip drivers/ics/954309 + register "reg0" = "0x2e" + register "reg1" = "0xf7" + register "reg2" = "0x3c" + register "reg3" = "0x20" + register "reg4" = "0x01" + register "reg5" = "0x00" + register "reg6" = "0x1b" + register "reg7" = "0x01" + register "reg8" = "0x54" + register "reg9" = "0xff" + register "reg10" = "0xff" + register "reg11" = "0x07" + device i2c 69 on end + end + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_t60/dock.c b/src/mainboard/lenovo/thinkpad_t60/dock.c new file mode 100644 index 0000000..b01f8e8 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/dock.c @@ -0,0 +1,238 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include "dock.h" +#include "superio/nsc/pc87384/pc87384.h" +#include "ec/acpi/ec.h" +#include "ec/lenovo/pmh7/pmh7.h" +#include "southbridge/intel/i82801gx/i82801gx.h" + +#define DLPC_CONTROL 0x164c + +static void dlpc_write_register(int reg, int value) +{ + outb(reg, 0x164e); + outb(value, 0x164f); +} + +static u8 dlpc_read_register(int reg) +{ + outb(reg, 0x164e); + return inb(0x164f); +} + +static void dock_write_register(int reg, int value) +{ + outb(reg, 0x2e); + outb(value, 0x2f); +} + +static u8 dock_read_register(int reg) +{ + outb(reg, 0x2e); + return inb(0x2f); +} + +static void dlpc_gpio_set_mode(int port, int mode) +{ + dlpc_write_register(0xf0, port); + dlpc_write_register(0xf1, mode); +} + +static void dock_gpio_set_mode(int port, int mode, int irq) +{ + dock_write_register(0xf0, port); + dock_write_register(0xf1, mode); + dock_write_register(0xf2, irq); +} + +static void dlpc_gpio_init(void) +{ + /* Select GPIO module */ + dlpc_write_register(0x07, 0x07); + /* GPIO Base Address 0x1680 */ + dlpc_write_register(0x60, 0x16); + dlpc_write_register(0x61, 0x80); + + /* Activate GPIO */ + dlpc_write_register(0x30, 0x01); + + dlpc_gpio_set_mode(0x00, 3); + dlpc_gpio_set_mode(0x01, 3); + dlpc_gpio_set_mode(0x02, 0); + dlpc_gpio_set_mode(0x03, 3); + dlpc_gpio_set_mode(0x04, 4); + dlpc_gpio_set_mode(0x20, 4); + dlpc_gpio_set_mode(0x21, 4); + dlpc_gpio_set_mode(0x23, 4); +} + +int dlpc_init(void) +{ + int timeout = 1000; + + /* Enable 14.318MHz CLK on CLKIN */ + dlpc_write_register(0x29, 0xa0); + while(!(dlpc_read_register(0x29) & 0x10) && timeout--) + udelay(1000); + + if (!timeout) + return 1; + + /* Select DLPC module */ + dlpc_write_register(0x07, 0x19); + /* DLPC Base Address */ + dlpc_write_register(0x60, (DLPC_CONTROL >> 8) & 0xff); + dlpc_write_register(0x61, DLPC_CONTROL & 0xff); + /* Activate DLPC */ + dlpc_write_register(0x30, 0x01); + + /* Reset docking state */ + outb(0x00, DLPC_CONTROL); + + dlpc_gpio_init(); + return 0; +} + +static int dock_superio_init(void) +{ + int timeout = 1000; + /* startup 14.318MHz Clock */ + dock_write_register(0x29, 0xa0); + /* wait until clock is settled */ + while(!(dock_read_register(0x29) & 0x10) && timeout--) + udelay(1000); + + if (!timeout) + return 1; + + /* set GPIO pins to Serial/Parallel Port + * functions + */ + dock_write_register(0x22, 0xa9); + + /* enable serial port */ + dock_write_register(0x07, PC87384_SP1); + dock_write_register(0x30, 0x01); + + dock_write_register(0x07, PC87384_GPIO); + dock_write_register(0x60, 0x16); + dock_write_register(0x61, 0x20); + /* enable GPIO */ + dock_write_register(0x30, 0x01); + + dock_gpio_set_mode(0x00, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x01, PC87384_GPIO_PIN_TYPE_PUSH_PULL | + PC87384_GPIO_PIN_OE, 0x00); + + dock_gpio_set_mode(0x02, PC87384_GPIO_PIN_TYPE_PUSH_PULL | + PC87384_GPIO_PIN_OE, 0x00); + + dock_gpio_set_mode(0x03, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x04, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x05, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x06, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x07, PC87384_GPIO_PIN_DEBOUNCE | + PC87384_GPIO_PIN_PULLUP, 0x00); + + + /* no GPIO events enabled for PORT0 */ + outb(0x00, 0x1622); + /* clear GPIO events on PORT0 */ + outb(0xff, 0x1623); + outb(0xff, 0x1624); + /* no GPIO events enabled for PORT1 */ + outb(0x00, 0x1626); + + /* clear GPIO events on PORT1*/ + outb(0xff, 0x1627); + outb(0x1F, 0x1628); + outb(0xfd, 0x1620); + return 0; +} + +int dock_connect(void) +{ + int timeout = 1000; + + outb(0x07, DLPC_CONTROL); + + timeout = 1000; + + while(!(inb(DLPC_CONTROL) & 8) && timeout--) + udelay(1000); + + if (!timeout) { + /* docking failed, disable DLPC switch */ + outb(0x00, DLPC_CONTROL); + dlpc_write_register(0x30, 0x00); + return 1; + } + + /* Assert D_PLTRST# */ + outb(0xfe, 0x1680); + udelay(1000); + /* Deassert D_PLTRST# */ + outb(0xff, 0x1680); + udelay(10000); + + return dock_superio_init(); +} + +void dock_disconnect(void) +{ + /* disconnect LPC bus */ + outb(0x00, DLPC_CONTROL); + /* Assert PLTRST and DLPCPD */ + outb(0xfc, 0x1680); +} + +int dock_present(void) +{ + return pmh7_register_read(0x61) & 1; +} + +int legacy_io_present(void) +{ + return !(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40); +} + +void legacy_io_init(void) +{ + /* Enable Power for Ultrabay slot */ + pmh7_ultrabay_power_enable(1); + udelay(100000); + dock_superio_init(); +} diff --git a/src/mainboard/lenovo/thinkpad_t60/dock.h b/src/mainboard/lenovo/thinkpad_t60/dock.h new file mode 100644 index 0000000..631f007 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/dock.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef THINKPAD_X60_DOCK_H +#define THINKPAD_X60_DOCK_H + +extern int dock_connect(void); +extern void dock_disconnect(void); +extern int dock_present(void); +extern int dlpc_init(void); + +extern int legacy_io_present(void); +extern void legacy_io_init(void); +#endif diff --git a/src/mainboard/lenovo/thinkpad_t60/dsdt.asl b/src/mainboard/lenovo/thinkpad_t60/dsdt.asl new file mode 100644 index 0000000..4122917 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/dsdt.asl @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 28 +#define BRIGHTNESS_UP \DSPC.BRTU +#define BRIGHTNESS_DOWN \DSPC.BRTD +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + + // General Purpose Events + #include "acpi/gpe.asl" + + // mainboard specific devices + #include "acpi/mainboard.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> + + // Dock support code + #include "acpi/dock.asl" +} diff --git a/src/mainboard/lenovo/thinkpad_t60/fadt.c b/src/mainboard/lenovo/thinkpad_t60/fadt.c new file mode 100644 index 0000000..96767bd --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/fadt.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/acpi.h> + +void mainboard_fill_fadt(acpi_fadt_t * fadt) +{ + fadt->p_lvl3_lat = 0x23; + fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; +} diff --git a/src/mainboard/lenovo/thinkpad_t60/hda_verb.c b/src/mainboard/lenovo/thinkpad_t60/hda_verb.c new file mode 100644 index 0000000..072a306 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/hda_verb.c @@ -0,0 +1,7 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_t60/irq_tables.c b/src/mainboard/lenovo/thinkpad_t60/irq_tables.c new file mode 100644 index 0000000..8991d7f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/irq_tables.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 15, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf5, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ + {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ + {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ + {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ + {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ + {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ + {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ + {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ + {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ + {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ + {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ + {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ + {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lenovo/thinkpad_t60/mainboard.c b/src/mainboard/lenovo/thinkpad_t60/mainboard.c new file mode 100644 index 0000000..79b3da8 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/mainboard.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <ec/lenovo/pmh7/pmh7.h> +#include <ec/acpi/ec.h> +#include <ec/lenovo/h8/h8.h> +#include <northbridge/intel/i945/i945.h> +#include <pc80/mc146818rtc.h> +#include <arch/x86/include/arch/acpigen.h> +#include <arch/interrupt.h> +#include <smbios.h> +#include <build.h> +#include <drivers/intel/gma/int15.h> +#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT + +static acpi_cstate_t cst_entries[] = { + { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, + { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, + { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, +}; + +int get_cst_entries(acpi_cstate_t **entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + +static void mainboard_init(device_t dev) +{ + struct southbridge_intel_i82801gx_config *config; + device_t dev0, idedev; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); + + /* If we're resuming from suspend, blink suspend LED */ + dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); + if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) + ec_write(0x0c, 0xc7); + + idedev = dev_find_slot(0, PCI_DEVFN(0x1f,1)); + + if (!(inb(DEFAULT_GPIOBASE + 0x0c) & 0x40)) { + /* legacy I/O connected */ + pmh7_ultrabay_power_enable(1); + ec_write(0x0c, 0x84); + } else if (idedev && idedev->chip_info && + h8_ultrabay_device_present()) { + config = idedev->chip_info; + config->ide_enable_primary = 1; + pmh7_ultrabay_power_enable(1); + ec_write(0x0c, 0x84); + } else { + pmh7_ultrabay_power_enable(0); + ec_write(0x0c, 0x04); + } + + /* set dock status led */ + ec_write(0x0c, 0x08); + ec_write(0x0c, inb(0x164c) & 8 ? 0x89 : 0x09); +} + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_t60/mptable.c b/src/mainboard/lenovo/thinkpad_t60/mptable.c new file mode 100644 index 0000000..744ef30 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/mptable.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x11); /* HD Audio 0:1b.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x14); /* PCIe 0:1c.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x15); /* PCIe 0:1c.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x16); /* PCIe 0:1c.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x17); /* PCIe 0:1c.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x10); /* USB 0:1d.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x11); /* USB 0:1d.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x13); /* USB 0:1d.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x17); /* LPC 0:1f.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x10); /* IDE 0:1f.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x02, 0x02, 0x10); /* SATA 0:1f.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x06, (0x00 << 2) | 0x00, 0x02, 0x10); /* Cardbus 6:00.0 */ + + mptable_lintsrc(mc, isa_bus); + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lenovo/thinkpad_t60/romstage.c b/src/mainboard/lenovo/thinkpad_t60/romstage.c new file mode 100644 index 0000000..f11b33e --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/romstage.c @@ -0,0 +1,332 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <timestamp.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include "northbridge/intel/i945/i945.h" +#include "northbridge/intel/i945/raminit.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include "dock.h" + +void setup_ich7_gpios(void) +{ + printk(BIOS_DEBUG, " GPIOS..."); + + /* T60 GPIO: + 6: LEGACYIO# + 7: BDC_PRESENCE# + 8: H8_WAKE# + 10: MDI_DETECT + 12: H8SCI# + 14: CPUSB# + 15: CPPE# + 25: MDC_KILL# + 27: EXC_PWR_CTRL + 28: EXC_AUX_CTRL + 35: CLKREQ_SATA# + 36: PLANARID0 + 37: PLANARID1 + 38: PLANARID2 + 39: PLANARID3 + */ + outl(0x1f48f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e0ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xfbfefb7d, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + /* Output Control Registers */ + outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + /* Input Control Registers */ + outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000100f0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x000000f1, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x000300a3, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ +} + +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); + // decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210); + // decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d); + + /* range 0x1600 - 0x167f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c); + + /* range 0x15e0 - 0x10ef */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); + + /* range 0x1680 - 0x169f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c); +} + +static void early_superio_config(void) +{ + int timeout = 100000; + device_t dev = PNP_DEV(0x2e, 3); + + pnp_write_config(dev, 0x29, 0xa0); + + while(!(pnp_read_config(dev, 0x29) & 0x10) && timeout--) + udelay(1000); + + /* Enable COM1 */ + pnp_set_logical_device(dev); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); + pnp_set_enable(dev, 1); +} + +static void rcba_config(void) +{ + /* Set up virtual channel 0 */ + RCBA32(0x0014) = 0x80000001; + RCBA32(0x001c) = 0x03128010; + + /* Device 1f interrupt pin register */ + RCBA32(0x3100) = 0x00001230; + RCBA32(0x3108) = 0x40004321; + + /* PCIe Interrupts */ + RCBA32(0x310c) = 0x00004321; + /* HD Audio Interrupt */ + RCBA32(0x3110) = 0x00000002; + + /* dev irq route register */ + RCBA16(0x3140) = 0x1007; + RCBA16(0x3142) = 0x0076; + RCBA16(0x3144) = 0x3210; + RCBA16(0x3146) = 0x7654; + RCBA16(0x3148) = 0x0010; + + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + /* Enable upper 128bytes of CMOS */ + RCBA32(0x3400) = (1 << 2); + + /* Disable unused devices */ + RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; + RCBA32(0x3418) |= (1 << 0); // Required. + + /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ + RCBA32(0x1e84) = 0x00020001; + RCBA32(0x1e80) = 0x0000fe01; + + /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ + RCBA32(0x1e9c) = 0x000200f0; + RCBA32(0x1e98) = 0x000c0801; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA32(0x3418) |= (1 << 0); + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 reg32; + int boot_mode = 0, dock_err; + int cbmem_was_initted; + const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 }; + + + timestamp_init(get_initial_timestamp()); + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + udelay(200 * 1000); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + + ich7_enable_lpc(); + + /* We want early GPIO setup, to be able to detect legacy I/O module */ + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); + /* Enable GPIOs */ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); + setup_ich7_gpios(); + + dock_err = dlpc_init(); + + /* We prefer Legacy I/O module over docking */ + if (legacy_io_present()) { + legacy_io_init(); + early_superio_config(); + } else if (!dock_err && dock_present()) { + dock_connect(); + early_superio_config(); + } + + /* Setup the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + outb(0x6, 0xcf9); + while (1) asm("hlt"); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } else { + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); + } + } + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(boot_mode, spd_addrmap); + timestamp_add_now(TS_AFTER_INITRAM); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(); + + MCHBAR16(SSKPD) = 0xCAFE; + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); + } +#endif + + timestamp_add_now(TS_END_ROMSTAGE); + +} diff --git a/src/mainboard/lenovo/thinkpad_t60/smi.h b/src/mainboard/lenovo/thinkpad_t60/smi.h new file mode 100644 index 0000000..f8e8a7c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/smi.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_LENOVO_X60_SMI_H +#define MAINBOARD_LENOVO_X60_SMI_H + +#define SMI_DOCK_CONNECT 0x01 +#define SMI_DOCK_DISCONNECT 0x02 +#define SMI_BRIGHTNESS_UP 0x03 +#define SMI_BRIGHTNESS_DOWN 0x04 + +#endif diff --git a/src/mainboard/lenovo/thinkpad_t60/smihandler.c b/src/mainboard/lenovo/thinkpad_t60/smihandler.c new file mode 100644 index 0000000..130ad96 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_t60/smihandler.c @@ -0,0 +1,197 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include <ec/acpi/ec.h> +#include "dock.h" +#include "smi.h" + +#define LVTMA_BL_MOD_LEVEL 0x7af9 /* ATI Radeon backlight level */ +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 *bar; + if ((bar = (u8 *)pci_read_config32(PCI_DEV(1, 0, 0), 0x18))) { + printk(BIOS_DEBUG, "bar: %08X, level %02X\n", (unsigned int)bar, *(bar+LVTMA_BL_MOD_LEVEL)); + *(bar+LVTMA_BL_MOD_LEVEL) &= 0xf0; + if (*(bar+LVTMA_BL_MOD_LEVEL) > 0x10) + *(bar+LVTMA_BL_MOD_LEVEL) -= 0x10; + } +} + +static void mainboard_smi_brightness_up(void) +{ + u8 *bar; + if ((bar = (u8 *)pci_read_config32(PCI_DEV(1, 0, 0), 0x18))) { + printk(BIOS_DEBUG, "bar: %08X, level %02X\n", (unsigned int )bar, *(bar+LVTMA_BL_MOD_LEVEL)); + *(bar+LVTMA_BL_MOD_LEVEL) |= 0x0f; + if (*(bar+LVTMA_BL_MOD_LEVEL) < 0xf0) + *(bar+LVTMA_BL_MOD_LEVEL) += 0x10; + } +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + case SMI_DOCK_CONNECT: + /* If there's an legacy I/O module present, we're not + * allowed to connect the Docking LPC Bus, as both Super I/O + * chips are using 0x2e as base address. + */ + if (legacy_io_present()) + break; + + if (!dock_connect()) { + /* set dock LED to indicate status */ + ec_write(0x0c, 0x08); + ec_write(0x0c, 0x89); + } else { + /* blink dock LED to indicate failure */ + ec_write(0x0c, 0xc8); + ec_write(0x0c, 0x09); + } + break; + + case SMI_DOCK_DISCONNECT: + dock_disconnect(); + ec_write(0x0c, 0x09); + ec_write(0x0c, 0x08); + break; + + case SMI_BRIGHTNESS_UP: + mainboard_smi_brightness_up(); + break; + + case SMI_BRIGHTNESS_DOWN: + mainboard_smi_brightness_down(); + break; + + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch(event) { + /* brightness up */ + case 0x14: + mainboard_smi_brightness_up(); + break; + /* brightness down */ + case 0x15: + mainboard_smi_brightness_down(); + break; + /* Fn-F9 Key */ + case 0x18: + /* power loss */ + case 0x27: + /* undock event */ + case 0x50: + mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); + break; + /* dock event */ + case 0x37: + mainboard_io_trap_handler(SMI_DOCK_CONNECT); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi) +{ + if (gpi & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); + + if (!pmbase) + return 0; + + switch(data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + default: + break; + } + return 0; +} diff --git a/src/mainboard/lenovo/thinkpad_x200/Kconfig b/src/mainboard/lenovo/thinkpad_x200/Kconfig new file mode 100644 index 0000000..23be7c7 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/Kconfig @@ -0,0 +1,49 @@ +if BOARD_LENOVO_THINKPAD_X200 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_BGA956 + select NORTHBRIDGE_INTEL_GM45 + select SOUTHBRIDGE_INTEL_I82801IX + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select DRIVERS_ICS_954309 + select BOARD_ROMSIZE_KB_8192 + select DRIVERS_GENERIC_IOAPIC + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select EC_ACPI + select EARLY_CBMEM_INIT + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select INTEL_INT15 + +config MAINBOARD_DIR + string + default lenovo/thinkpad_x200 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad X200" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 2 + +endif # BOARD_LENOVO_THINKPAD_X200 diff --git a/src/mainboard/lenovo/thinkpad_x200/Makefile.inc b/src/mainboard/lenovo/thinkpad_x200/Makefile.inc new file mode 100644 index 0000000..4eb1216 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2012 secunet Security Networks AG +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-y += dock.c diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/dock.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/dock.asl new file mode 100644 index 0000000..605836b --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/dock.asl @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (_SB) +{ + Device(DOCK) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_DCK, 1, NotSerialized) + { + if (Arg0) { + /* connect dock */ + Store (1, \GP28) + Store (1, _SB.PCI0.LPCB.EC.DKR1) + } else { + /* disconnect dock */ + Store (0, \GP28) + Store (0, _SB.PCI0.LPCB.EC.DKR1) + } + Xor(Arg0, _SB.PCI0.LPCB.EC.DKR1, Local0) + Return (Local0) + } + + Method(_STA, 0, NotSerialized) + { + Return (_SB.PCI0.LPCB.EC.DKR1) + } + } +} + +Scope(_SB.PCI0.LPCB.EC) +{ + Method(_Q18, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q45, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q58, 0, NotSerialized) + { + Notify(_SB.DOCK, 0) + } + + Method(_Q37, 0, NotSerialized) + { + Notify(_SB.DOCK, 0) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/ec.asl new file mode 100644 index 0000000..c3569e8 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/ec.asl @@ -0,0 +1 @@ +#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/gm45_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/gm45_pci_irqs.asl new file mode 100644 index 0000000..83c7762 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/gm45_pci_irqs.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * gm45 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, 0, 16 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 }, + // USB and EHCI 0:1a.x + Package() { 0x001affff, 0, 0, 16 }, + Package() { 0x001affff, 1, 0, 17 }, + Package() { 0x001affff, 2, 0, 18 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 16 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, 0, 16 }, + Package() { 0x001dffff, 1, 0, 17 }, + Package() { 0x001dffff, 2, 0, 18 }, + // FIXME + // CardBus/IEEE1394 0:1e.2, 0:1e.3 + // Package() { 0x001effff, 0, 0, 22 }, + // Package() { 0x001effff, 1, 0, 20 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, 0, 16 }, + Package() { 0x001fffff, 1, 0, 17 }, + Package() { 0x001fffff, 2, 0, 18 } + }) + } Else { + Return (Package() { + // PCIe Graphics 0:1.0 + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // USB and EHCI 0:1a.x + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // USB and EHCI 0:1d.x + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, + // FIXME + // CardBus/IEEE1394 0:1e.2, 0:1e.3 + // Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKG, 0 }, + // Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 } + }) + } +} + diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/gpe.asl new file mode 100644 index 0000000..cc6075f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/gpe.asl @@ -0,0 +1,43 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (_GPE) +{ + Method(_L18, 0, NotSerialized) + { + /* Read EC register to clear wake status */ + Store(_SB.PCI0.LPCB.EC.WAKE, Local0) + } + + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP04.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP04.HPCS) + If (_SB.PCI0.RP04.PDC) + { + Store (0x01, _SB.PCI0.RP04.PDC) + Notify (_SB.PCI0.RP04, 0x00) + } + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/ich9_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/ich9_pci_irqs.asl new file mode 100644 index 0000000..325f13c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/ich9_pci_irqs.asl @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH9 + */ + +/* TODO: which slots are actually relevant? */ +If (PICM) { + Return (Package() { + // PCI Slot 1 routes ABCD + Package() { 0x0000ffff, 0, 0, 16}, + Package() { 0x0000ffff, 1, 0, 17}, + Package() { 0x0000ffff, 2, 0, 18}, + Package() { 0x0000ffff, 3, 0, 19}, + + // PCI Slot 2 routes BCDA + Package() { 0x0001ffff, 0, 0, 17}, + Package() { 0x0001ffff, 1, 0, 18}, + Package() { 0x0001ffff, 2, 0, 19}, + Package() { 0x0001ffff, 3, 0, 16}, + + // PCI Slot 3 routes CDAB + Package() { 0x0002ffff, 0, 0, 18}, + Package() { 0x0002ffff, 1, 0, 19}, + Package() { 0x0002ffff, 2, 0, 16}, + Package() { 0x0002ffff, 3, 0, 17}, + + // PCI Slot 4 routes ABCD + Package() { 0x0003ffff, 0, 0, 16}, + Package() { 0x0003ffff, 1, 0, 17}, + Package() { 0x0003ffff, 2, 0, 18}, + Package() { 0x0003ffff, 3, 0, 19}, + + // PCI Slot 5 routes ABCD + Package() { 0x0004ffff, 0, 0, 16}, + Package() { 0x0004ffff, 1, 0, 17}, + Package() { 0x0004ffff, 2, 0, 18}, + Package() { 0x0004ffff, 3, 0, 19}, + + // PCI Slot 6 routes BCDA + Package() { 0x0005ffff, 0, 0, 17}, + Package() { 0x0005ffff, 1, 0, 18}, + Package() { 0x0005ffff, 2, 0, 19}, + Package() { 0x0005ffff, 3, 0, 16}, + + // FIXME: what's this supposed to mean? (adopted from ich7) + //Package() { 0x0008ffff, 0, 0, 20}, + }) +} Else { + Return (Package() { + // PCI Slot 1 routes ABCD + Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0000ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0000ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0000ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, + + // PCI Slot 2 routes BCDA + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, + + // PCI Slot 3 routes CDAB + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKB, 0}, + + // PCI Slot 4 routes ABCD + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, + + // PCI Slot 5 routes ABCD + Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, + Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, + + // PCI Slot 6 routes BCDA + Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKB, 0}, + Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, + Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKD, 0}, + Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, + + // FIXME + // Package() { 0x0008ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, + }) +} + diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/platform.asl new file mode 100644 index 0000000..19b1e00 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi/platform.asl @@ -0,0 +1,206 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + // Call a trap so SMI can prepare for Sleep as well. + // TRAP(0x55) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + // TODO: Return Arg0 as second value if S-Arg0 was entered + // before. + + Return(Package(){0,0}) +} + +// Power notification + +External (_PR_.CPU0, DeviceObj) +External (_PR_.CPU1, DeviceObj) + +Method (PNOT) +{ + If (MPEN) { + If(And(PDC0, 0x08)) { + Notify (_PR_.CPU0, 0x80) // _PPC + + If (And(PDC0, 0x10)) { + Sleep(100) + Notify(_PR_.CPU0, 0x81) // _CST + } + } + + If(And(PDC1, 0x08)) { + Notify (_PR_.CPU1, 0x80) // _PPC + If (And(PDC1, 0x10)) { + Sleep(100) + Notify(_PR_.CPU1, 0x81) // _CST + } + } + + } Else { // UP + Notify (_PR_.CPU0, 0x80) + Sleep(0x64) + Notify(_PR_.CPU0, 0x81) + } + +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + // TRAP(71) // TODO + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + /* Linux answers _OSI with "True" for a couple of + * Windows version queries. But unlike Windows it + * needs a Video repost, so let's determine whether + * we're running Linux. + */ + + If (_OSI("Linux")) { + Store (1, LINX) + } + + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + } + + /* And the OS workarounds start right after we know what we're + * running: Windows XP SP1 needs to have C-State coordination + * enabled in SMM. + */ + If (LAnd(LEqual(OSYS, 2001), MPEN)) { + // TRAP(61) // TODO + } + + /* SMM power state and C4-on-C3 settings need to be updated */ + // TRAP(43) // TODO + } +} + diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_x200/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/thinkpad_x200/acpi_tables.c b/src/mainboard/lenovo/thinkpad_x200/acpi_tables.c new file mode 100644 index 0000000..77491dc --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/acpi_tables.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include "southbridge/intel/i82801ix/nvs.h" +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 0; /* Will use default of 0x00000400. */ + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); + + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_x200/board_info.txt b/src/mainboard/lenovo/thinkpad_x200/board_info.txt new file mode 100644 index 0000000..60496f5 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: SOIC-16 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_x200/cmos.default b/src/mainboard/lenovo/thinkpad_x200/cmos.default new file mode 100644 index 0000000..1da4c7c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/cmos.default @@ -0,0 +1,15 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +trackpoint=Enable +fn_ctrl_swap=Disable +sticky_fn=Disable +power_management_beeps=Enable +low_battery_beep=Enable +sata_mode=AHCI diff --git a/src/mainboard/lenovo/thinkpad_x200/cmos.layout b/src/mainboard/lenovo/thinkpad_x200/cmos.layout new file mode 100644 index 0000000..c668923 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/cmos.layout @@ -0,0 +1,167 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# 2012 secunet Security Networks AG +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 240 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: EC +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 10 sata_mode + +# coreboot config options: EC +409 1 e 9 first_battery +410 1 e 1 bluetooth +411 1 e 1 wwan +412 1 e 1 wlan +413 1 e 1 trackpoint +414 1 e 1 fn_ctrl_swap +415 1 e 1 sticky_fn + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default + +936 1 e 1 power_management_beeps +937 1 e 1 low_battery_beep +938 1 e 1 uwb + +# coreboot config options: northbridge +939 3 e 11 gfx_uma_size + +#942 2 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 unused + +# ram initialization internal data +1024 128 r 0 read_training_results + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 No +8 1 Yes +9 0 Secondary +9 1 Primary +10 0 AHCI +10 1 Compatible +11 0 32M +11 1 48M +11 2 64M +11 3 128M +11 5 96M +11 6 160M + +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 + diff --git a/src/mainboard/lenovo/thinkpad_x200/cstates.c b/src/mainboard/lenovo/thinkpad_x200/cstates.c new file mode 100644 index 0000000..aacfc31 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/cstates.c @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/acpigen.h> +#include <device/device.h> /* fix for i82801ix.h */ +#include <southbridge/intel/i82801ix/i82801ix.h> + +static acpi_cstate_t cst_entries[] = { + { + /* acpi C1 / cpu C1 */ + 1, 0x01, 1000, + { ACPI_ADDRESS_SPACE_FIXED, 1, 2, { 1 }, 0, 0 } + }, + { + /* acpi C2 / cpu C2 */ + 2, 0x01, 500, + { ACPI_ADDRESS_SPACE_FIXED, 1, 2, { 1 }, 0x10, 0 } + }, +}; + +int get_cst_entries(acpi_cstate_t **entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} diff --git a/src/mainboard/lenovo/thinkpad_x200/devicetree.cb b/src/mainboard/lenovo/thinkpad_x200/devicetree.cb new file mode 100644 index 0000000..376273a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/devicetree.cb @@ -0,0 +1,203 @@ +chip northbridge/intel/gm45 + + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "0" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "4" + + device cpu_cluster 0 on + chip cpu/intel/socket_BGA956 + device lapic 0 on end + end + chip cpu/intel/model_1067x + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Enable Super LFM + register "slfm" = "1" + + # Enable C5, C6 + register "c5" = "1" + register "c6" = "1" + end + end + + device domain 0 on + device pci 00.0 on + subsystemid 0x17aa 0x20e0 + end # host bridge + device pci 02.0 on # VGA + subsystemid 0x17aa 0x20e4 + ioapic_irq 2 INTA 0x10 + end + device pci 02.1 on + subsystemid 0x17aa 0x20e4 + end # Display + device pci 03.0 on + subsystemid 0x17aa 0x20e6 + end # ME + device pci 03.1 off end # ME + device pci 03.2 off end # ME + device pci 03.3 off end # ME + chip southbridge/intel/i82801ix + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + register "gpi8_routing" = "2" + register "gpe0_en" = "0x01000000" + register "gpi1_routing" = "2" + + # Set AHCI mode, enable ports 1 and 2. + register "sata_port_map" = "0x03" + register "sata_clock_request" = "0" + register "sata_traffic_monitor" = "0" + + # Set c-state support + register "c4onc3_enable" = "0" + register "c5_enable" = "1" + register "c6_enable" = "1" + + # Set thermal throttling to 75%. + register "throttle_duty" = "THTL_75_0" + + # Enable PCIe ports 1,2,4 as slots (Mini * PCIe). + register "pcie_slot_implemented" = "0xb" + # Set power limits to 10 * 10^0 watts. + # Maybe we should set less for Mini PCIe. + register "pcie_power_limits" = "{ { 10, 0 }, { 10, 0 }, { 0, 0 }, { 10, 0 }, { 0, 0 }, { 0, 0 } }" + + chip drivers/generic/ioapic + register "have_isa_interrupts" = "1" + register "irq_on_fsb" = "1" + register "enable_virtual_wire" = "1" + register "base" = "0xfec00000" + device ioapic 2 on end + end + + device pci 19.0 on end # LAN + device pci 1a.0 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTA 0x10 + end + device pci 1a.1 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTB 0x11 + end + device pci 1a.2 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTC 0x12 + end + device pci 1a.7 on # EHCI + subsystemid 0x17aa 0x20f1 + ioapic_irq 2 INTC 0x12 + end + device pci 1b.0 on # HD Audio + subsystemid 0x17aa 0x20f2 + ioapic_irq 2 INTA 0x10 + end + device pci 1c.0 on # PCIe Port #1 + subsystemid 0x17aa 0x20f3 # WWAN + ioapic_irq 2 INTA 0x10 + end + device pci 1c.1 on + subsystemid 0x17aa 0x20f3 # WLAN + end # PCIe Port #2 + device pci 1c.2 on + subsystemid 0x17aa 0x20f3 # UWB + end # PCIe Port #3 + device pci 1c.3 on + subsystemid 0x17aa 0x20f3 # Expresscard + end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTA 0x10 + end + device pci 1d.1 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTB 0x11 + end + device pci 1d.2 on # UHCI + subsystemid 0x17aa 0x20f0 + ioapic_irq 2 INTC 0x12 + end + device pci 1d.7 on # EHCI + subsystemid 0x17aa 0x20f1 + ioapic_irq 2 INTA 0x10 + end + device pci 1e.0 on # PCI + subsystemid 0x17aa 0x20f4 + end + device pci 1f.0 on # LPC bridge + subsystemid 0x17aa 0x20f5 + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x04" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + register "has_power_management_beeps" = "1" + register "has_uwb" = "1" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3c" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "eventc_enable" = "0x3c" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + end + end + device pci 1f.2 on # SATA/IDE 1 + subsystemid 0x17aa 0x20f8 + ioapic_irq 2 INTB 0x11 + end + device pci 1f.3 on # SMBus + subsystemid 0x17aa 0x20f9 + ioapic_irq 2 INTC 0x12 + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end + device pci 1f.5 off end # SATA/IDE 2 + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_x200/dock.c b/src/mainboard/lenovo/thinkpad_x200/dock.c new file mode 100644 index 0000000..6f9e953 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/dock.c @@ -0,0 +1,65 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define __SIMPLE_DEVICE__ +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <delay.h> +#include "dock.h" +#include "southbridge/intel/i82801ix/i82801ix.h" +#include "ec/lenovo/h8/h8.h" +#include <ec/acpi/ec.h> + +#define LPC_DEV PCI_DEV(0, 0x1f, 0) + +void h8_mainboard_init_dock (void) +{ + if (dock_present()) { + printk(BIOS_DEBUG, "dock is connected\n"); + dock_connect(); + } else + printk(BIOS_DEBUG, "dock is not connected\n"); +} + +void dock_connect(void) +{ + u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; + ec_set_bit(0x02, 0); + outl(inl(gpiobase + 0x0c) | (1 << 28), gpiobase + 0x0c); +} + +void dock_disconnect(void) +{ + u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; + ec_clr_bit(0x02, 0); + outl(inl(gpiobase + 0x0c) & ~(1 << 28), gpiobase + 0x0c); +} + +int dock_present(void) +{ + u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; + u8 st = inb(gpiobase + 0x0c); + + return ((st >> 2) & 7) != 7; +} diff --git a/src/mainboard/lenovo/thinkpad_x200/dock.h b/src/mainboard/lenovo/thinkpad_x200/dock.h new file mode 100644 index 0000000..e888583 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/dock.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef THINKPAD_X200_DOCK_H +#define THINKPAD_X200_DOCK_H + +extern void dock_connect(void); +extern void dock_disconnect(void); +extern int dock_present(void); +#endif diff --git a/src/mainboard/lenovo/thinkpad_x200/dsdt.asl b/src/mainboard/lenovo/thinkpad_x200/dsdt.asl new file mode 100644 index 0000000..eb6ce6d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/dsdt.asl @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP04_IS_EXPRESSCARD 1 +#define DISPLAY_DEVICE_2_IS_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801ix/acpi/globalnvs.asl> + + // General Purpose Events + #include "acpi/gpe.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/gm45/acpi/gm45.asl> + #include <southbridge/intel/i82801ix/acpi/ich9.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801ix/acpi/sleepstates.asl> + + /* Dock support code */ + #include "acpi/dock.asl" +} diff --git a/src/mainboard/lenovo/thinkpad_x200/fadt.c b/src/mainboard/lenovo/thinkpad_x200/fadt.c new file mode 100644 index 0000000..fef9721 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/fadt.c @@ -0,0 +1,158 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 0x00; + fadt->preferred_pm_profile = PM_MOBILE; + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = APM_CNT_PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; /* Upper word is reserved and + Linux complains about 32 bit. */ + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = APM_CNT_CST_CONTROL; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 0x39; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x00; + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_DOCKING_SUPPORTED | ACPI_FADT_RESET_REGISTER | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + fadt->reset_value = 0x06; + + fadt->x_firmware_ctl_l = 0; /* Set X_FIRMWARE_CTRL only if FACS is */ + fadt->x_firmware_ctl_h = 0; /* above 4GB. If X_FIRMWARE_CTRL is set, */ + /* then FIRMWARE_CTRL must be zero. */ + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 0; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; /* Upper word is reserved and + Linux complains about 32 bit. */ + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 0; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 0; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_x200/hda_verb.c b/src/mainboard/lenovo/thinkpad_x200/hda_verb.c new file mode 100644 index 0000000..c1cd542 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/hda_verb.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * 2012 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x14f15051, // Conexant CX20561 (Hermosa) + 0x17aa20ff, // Subsystem ID + 0x00000008, // Number of entries + + /* Pin Widget Verb Table */ + + AZALIA_PIN_CFG(0, 0x16, 0x042140f0), + AZALIA_PIN_CFG(0, 0x17, 0x61a190f0), + AZALIA_PIN_CFG(0, 0x18, 0x04a190f0), + AZALIA_PIN_CFG(0, 0x19, 0x612140f0), + AZALIA_PIN_CFG(0, 0x1a, 0x901701f0), + AZALIA_PIN_CFG(0, 0x1b, 0x40f001f0), + AZALIA_PIN_CFG(0, 0x1c, 0x40f001f0), + AZALIA_PIN_CFG(0, 0x1d, 0x90a601f0) +}; + +const u32 pc_beep_verbs[] = { + 0x00170500, /* power up codec */ + 0x01470500, /* power up speakers */ + 0x01470100, /* select lout1 (input 0x0) for speakers */ + 0x01470740, /* enable speakers output */ + 0x00b37517, /* unmute beep (mixer's input 0x5), set amp 0dB */ + 0x00c37100, /* unmute mixer in lout1 (lout1 input 0x1) */ + 0x00c3b015, /* set lout1 output volume -15dB */ + 0x0143b000, /* unmute speakers */ +}; +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_x200/mainboard.c b/src/mainboard/lenovo/thinkpad_x200/mainboard.c new file mode 100644 index 0000000..0054064 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/mainboard.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <arch/io.h> +//#include <pc80/mc146818rtc.h> +#include <device/device.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <pc80/keyboard.h> +#include <ec/acpi/ec.h> +#include <smbios.h> +#include <string.h> +#include <build.h> +#include <ec/lenovo/pmh7/pmh7.h> +#include <ec/acpi/ec.h> +#include <ec/lenovo/h8/h8.h> + +#include "cstates.c" /* Include it, as the linker won't find + the overloaded weak function in there. */ + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + +static void mainboard_init(device_t dev) +{ + /* This sneaked in here, because X200 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(); +} + +static void mainboard_enable(device_t dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 2); + + dev->ops->init = mainboard_init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; + diff --git a/src/mainboard/lenovo/thinkpad_x200/mptable.c b/src/mainboard/lenovo/thinkpad_x200/mptable.c new file mode 100644 index 0000000..f1839f0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/mptable.c @@ -0,0 +1 @@ +/* dummy file */ diff --git a/src/mainboard/lenovo/thinkpad_x200/romstage.c b/src/mainboard/lenovo/thinkpad_x200/romstage.c new file mode 100644 index 0000000..dcb4e16 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/romstage.c @@ -0,0 +1,212 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <cpu/x86/lapic.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/tsc.h> +#include <cbmem.h> +#include <lib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <southbridge/intel/i82801ix/i82801ix.h> +#include <northbridge/intel/gm45/gm45.h> + +#define LPC_DEV PCI_DEV(0, 0x1f, 0) +#define MCH_DEV PCI_DEV(0, 0, 0) + +static void default_southbridge_gpio_setup(void) +{ + outl(0x197e23fe, DEFAULT_GPIOBASE + 0x00); + outl(0xe1a66dfe, DEFAULT_GPIOBASE + 0x04); + outl(0xe3faef3f, DEFAULT_GPIOBASE + 0x0c); + + /* Disable blink [31:0]. */ + outl(0x00000000, DEFAULT_GPIOBASE + 0x18); + /* Set input inversion [31:0]. */ + outl(0x00000102, DEFAULT_GPIOBASE + 0x2c); + + /* Enable GPIOs [60:32]. */ + outl(0x030306f6, DEFAULT_GPIOBASE + 0x30); + /* Set input/output mode [60:32] (0 == out, 1 == in). */ + outl(0x1f55f9f1, DEFAULT_GPIOBASE + 0x34); + /* Set gpio levels [60:32]. */ + outl(0x1dffff53, DEFAULT_GPIOBASE + 0x38); +} + +static void early_lpc_setup(void) +{ + /* Set up SuperIO LPC forwards */ + + /* Configure serial IRQs.*/ + pci_write_config8(LPC_DEV, D31F0_SERIRQ_CNTL, 0xd0); + /* Map COMa on 0x3f8, COMb on 0x2f8. */ + pci_write_config16(LPC_DEV, D31F0_LPC_IODEC, 0x0010); + pci_write_config16(LPC_DEV, D31F0_LPC_EN, 0x3f0f); + pci_write_config32(LPC_DEV, D31F0_GEN1_DEC, 0x7c1601); + pci_write_config32(LPC_DEV, D31F0_GEN2_DEC, 0xc15e1); + pci_write_config32(LPC_DEV, D31F0_GEN3_DEC, 0x1c1681); +} + +void main(unsigned long bist) +{ + sysinfo_t sysinfo; + int s3resume = 0; + int cbmem_initted; + u16 reg16; + + /* Enable expresscard hotplug events. */ + pci_write_config32(PCI_DEV (0, 0x1c, 3), + 0xd8, + pci_read_config32(PCI_DEV (0, 0x1c, 3), 0xd8) + | (1 << 30)); + pci_write_config16(PCI_DEV (0, 0x1c, 3), + 0x42, 0x141); + + /* basic northbridge setup, including MMCONF BAR */ + gm45_early_init(); + + if (bist == 0) + enable_lapic(); + + /* First, run everything needed for console output. */ + i82801ix_early_init(); + early_lpc_setup(); + console_init(); + printk(BIOS_DEBUG, "running main(bist = %lu)\n", bist); + + reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3); + pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16); + if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) { + printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + gm45_early_reset(); + } + + default_southbridge_gpio_setup(); + + /* ASPM related setting, set early by original BIOS. */ + DMIBAR16(0x204) &= ~(3 << 10); + + /* Check for S3 resume. */ + const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04); + if (((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + s3resume = 1; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04); +#else + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); +#endif + } + + /* RAM initialization */ + enter_raminit_or_reset(); + memset(&sysinfo, 0, sizeof(sysinfo)); + sysinfo.spd_map[0] = 0x50; + sysinfo.spd_map[2] = 0x51; + sysinfo.enable_igd = 1; + sysinfo.enable_peg = 0; + get_gmch_info(&sysinfo); + raminit(&sysinfo, s3resume); + + const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN); + /* Disable D4F0 (unknown signal controller). */ + pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000); + + init_pm(&sysinfo, 0); + + i82801ix_dmi_setup(); + gm45_late_init(sysinfo.stepping); + i82801ix_dmi_poll_vc1(); + + MCHBAR16(SSKPD_MCHBAR) = 0xCAFE; + /* Enable ethernet. */ + RCBA32(0x3414) &= ~0x20; + + RCBA32(0x0238) = 0x00543210; + RCBA32(0x0240) = 0x009c0b02; + RCBA32(0x0244) = 0x00a20b1a; + RCBA32(0x0248) = 0x005402cb; + RCBA32(0x0254) = 0x00470966; + RCBA32(0x0258) = 0x00470473; + RCBA32(0x0260) = 0x00e90825; + RCBA32(0x0278) = 0x00bc0efb; + RCBA32(0x027c) = 0x00c00f0b; + RCBA32(0x0280) = 0x00670000; + RCBA32(0x0284) = 0x006d0000; + RCBA32(0x0288) = 0x00600b4e; + RCBA32(0x1e10) = 0x00020800; + RCBA32(0x1e18) = 0x36ea00a0; + RCBA32(0x1e80) = 0x000c0801; + RCBA32(0x1e84) = 0x000200f0; + RCBA32(0x2028) = 0x04c8f95e; + RCBA32(0x202c) = 0x055c095e; + RCBA32(0x204c) = 0x001ffc00; + RCBA32(0x2050) = 0x00100fff; + RCBA32(0x2090) = 0x37000000; + RCBA32(0x20b0) = 0x0c000000; + RCBA32(0x20d0) = 0x09000000; + RCBA32(0x20f0) = 0x05000000; + RCBA32(0x3400) = 0x0000001c; + RCBA32(0x3410) = 0x00100461; + RCBA32(0x3414) = 0x00000000; + RCBA32(0x341c) = 0xbf4f001f; + RCBA32(0x3420) = 0x00000000; + RCBA32(0x3430) = 0x00000001; + + init_iommu(); + + /* FIXME: make a proper SMBUS mux support. */ + outl(inl(DEFAULT_GPIOBASE + 0x38) & ~0x400, DEFAULT_GPIOBASE + 0x38); + + cbmem_initted = !cbmem_recovery(s3resume); +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if (s3resume && cbmem_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0, 0), D0F0_SKPD, SKPAD_ACPI_S3_MAGIC); + } else { + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0, 0), D0F0_SKPD, SKPAD_NORMAL_BOOT_MAGIC); + } +#endif + printk(BIOS_SPEW, "exit main()\n"); +} + diff --git a/src/mainboard/lenovo/thinkpad_x200/smihandler.c b/src/mainboard/lenovo/thinkpad_x200/smihandler.c new file mode 100644 index 0000000..baa038e --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x200/smihandler.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <southbridge/intel/i82801ix/nvs.h> +#include <southbridge/intel/i82801ix/i82801ix.h> +#include <ec/acpi/ec.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +int mainboard_io_trap_handler(int smif) +{ + switch (smif) { + case 0x99: + printk(BIOS_DEBUG, "Sample\n"); + gnvs->smif = 0; + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 0 + * On failure, the IO Trap Handler returns a value != 0 + * + * For now, we force the return value to 0 and log all traps to + * see what's going on. + */ + //gnvs->smif = 0; + return 1; +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 1)) { + printk(BIOS_DEBUG, "EC/SMI\n"); + /* TODO */ + } +} + +int mainboard_smi_apmc(u8 apmc) +{ + switch (apmc) { + case APM_CNT_ACPI_ENABLE: + send_ec_command(0x05); /* Set_SMI_Disable */ + send_ec_command(0xaa); /* Set_ACPI_Enable */ + break; + + case APM_CNT_ACPI_DISABLE: + send_ec_command(0x04); /* Set_SMI_Enable */ + send_ec_command(0xab); /* Set_ACPI_Disable */ + break; + } + return 0; +} diff --git a/src/mainboard/lenovo/thinkpad_x201/Kconfig b/src/mainboard/lenovo/thinkpad_x201/Kconfig new file mode 100644 index 0000000..e673a5f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/Kconfig @@ -0,0 +1,56 @@ +if BOARD_LENOVO_THINKPAD_X201 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select NORTHBRIDGE_INTEL_NEHALEM + select SOUTHBRIDGE_INTEL_IBEXPEAK + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select DRIVERS_ICS_954309 + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select INTEL_INT15 + select HAVE_ACPI_RESUME + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select SUPERIO_NSC_PC87382 + select DRIVERS_LENOVO_WACOM + +config MAINBOARD_DIR + string + default lenovo/thinkpad_x201 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad X201" + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 10 + +config MAX_CPUS + int + default 4 + +config CPU_ADDR_BITS + int + default 36 + +endif diff --git a/src/mainboard/lenovo/thinkpad_x201/Makefile.inc b/src/mainboard/lenovo/thinkpad_x201/Makefile.inc new file mode 100644 index 0000000..eb099f3 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/Makefile.inc @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +romstage-y += dock.c +ramstage-y += dock.c diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/dock.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/dock.asl new file mode 100644 index 0000000..421ee15 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/dock.asl @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Scope (_SB) +{ + Device(DOCK) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_DCK, 1, NotSerialized) + { + if (Arg0) { + /* connect dock */ + Store (1, \GP28) + Store (1, _SB.PCI0.LPCB.EC.DKR1) + Store (1, _SB.PCI0.LPCB.EC.DKR2) + Store (1, _SB.PCI0.LPCB.EC.DKR3) + } else { + /* disconnect dock */ + Store (0, \GP28) + Store (0, _SB.PCI0.LPCB.EC.DKR1) + Store (0, _SB.PCI0.LPCB.EC.DKR2) + Store (0, _SB.PCI0.LPCB.EC.DKR3) + } + Xor(Arg0, _SB.PCI0.LPCB.EC.DKR1, Local0) + Return (Local0) + } + + Method(_STA, 0, NotSerialized) + { + Return (_SB.PCI0.LPCB.EC.DKR1) + } + } +} + +Scope(_SB.PCI0.LPCB.EC) +{ + Method(_Q18, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q45, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q58, 0, NotSerialized) + { + Notify(_SB.DOCK, 0) + } + + Method(_Q37, 0, NotSerialized) + { + Notify(_SB.DOCK, 0) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/gpe.asl new file mode 100644 index 0000000..2f0ee16 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/gpe.asl @@ -0,0 +1,44 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" +Scope (_GPE) +{ + Method(_L18, 0, NotSerialized) + { + /* Read EC register to clear wake status */ + Store(_SB.PCI0.LPCB.EC.WAKE, Local0) + } + + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP04.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP04.HPCS) + If (_SB.PCI0.RP04.PDC) + { + Store (0x01, _SB.PCI0.RP04.PDC) + Notify (_SB.PCI0.RP04, 0x00) + } + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/nehalem_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/nehalem_pci_irqs.asl new file mode 100644 index 0000000..3e9e1b3 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/nehalem_pci_irqs.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing. + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0001ffff, 0, 0, 0x10 }, + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x0003ffff, 0, 0, 0x10 }, + Package() { 0x0016ffff, 0, 0, 0x10 }, // ME + Package() { 0x0016ffff, 1, 0, 0x11 }, // ME + Package() { 0x0016ffff, 2, 0, 0x12 }, // ME + Package() { 0x0016ffff, 3, 0, 0x13 }, // ME + Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet + Package() { 0x001affff, 0, 0, 0x14 }, // USB + Package() { 0x001affff, 1, 0, 0x15 }, // USB + Package() { 0x001affff, 2, 0, 0x16 }, // USB + Package() { 0x001affff, 3, 0, 0x17 }, // USB + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x11 }, // SATA + Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS + }) + } Else { + Return (Package() { + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME + Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME + Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME + Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB + Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB + Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB + Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/platform.asl new file mode 100644 index 0000000..1370117 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/platform.asl @@ -0,0 +1,148 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, /* APM command */ + APMS, 8 /* APM status */ +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) /* SMI Function */ + Store (0, TRP0) /* Generate trap */ + Return (SMIF) /* Return value of SMI handler */ +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + /* Remember the OS' IRQ routing choice. */ + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + _SB.PCI0.LPCB.EC.MUTE(1) + _SB.PCI0.LPCB.EC.USBP(0) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* Not implemented. */ + Return(Package(){0,0}) +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + /* TRAP(71) */ /* TODO */ + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2001.1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001.1 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006.1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006 SP1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2009")) { + Store (2009, OSYS) + } + + If (_OSI("Windows 2012")) { + Store (2012, OSYS) + } + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_x201/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/thinkpad_x201/acpi_tables.c b/src/mainboard/lenovo/thinkpad_x201/acpi_tables.c new file mode 100644 index 0000000..b8979f4 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/acpi_tables.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "southbridge/intel/ibexpeak/nvs.h" + +void acpi_create_gnvs(global_nvs_t * gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 1, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, + MP_IRQ_POLARITY_DEFAULT | + MP_IRQ_TRIGGER_DEFAULT); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_LEVEL); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 2, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 3, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_x201/board_info.txt b/src/mainboard/lenovo/thinkpad_x201/board_info.txt new file mode 100644 index 0000000..689ca8f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_x201/cmos.default b/src/mainboard/lenovo/thinkpad_x201/cmos.default new file mode 100644 index 0000000..29eb509 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +touchpad=Enable +trackpoint=Enable +fn_ctrl_swap=Disable +sticky_fn=Disable +power_management_beeps=Enable +low_battery_beep=Enable +sata_mode=AHCI diff --git a/src/mainboard/lenovo/thinkpad_x201/cmos.layout b/src/mainboard/lenovo/thinkpad_x201/cmos.layout new file mode 100644 index 0000000..cba457f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/cmos.layout @@ -0,0 +1,157 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2013 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +415 1 e 1 wlan +416 1 e 1 trackpoint +417 1 e 1 fn_ctrl_swap +418 1 e 1 sticky_fn +419 1 e 1 power_management_beeps +420 1 e 1 low_battery_beep +421 1 e 9 sata_mode + +#422 2 r 0 unused + +# coreboot config options: northbridge +424 3 e 10 gfx_uma_size + +#427 557 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 32M +10 1 48M +10 2 64M +10 3 128M +10 5 96M +10 6 160M + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/lenovo/thinkpad_x201/devicetree.cb b/src/mainboard/lenovo/thinkpad_x201/devicetree.cb new file mode 100644 index 0000000..7592cb0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/devicetree.cb @@ -0,0 +1,181 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/nehalem + + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "3" + register "gpu_panel_power_up_delay" = "250" + register "gpu_panel_power_down_delay" = "250" + register "gpu_panel_power_backlight_on_delay" = "2500" + register "gpu_panel_power_backlight_off_delay" = "2500" + register "gpu_cpu_backlight" = "0x58d" + register "gpu_pch_backlight" = "0x061a061a" + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "0" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "4" + + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x05" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + register "has_power_management_beeps" = "1" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3c" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "eventc_enable" = "0x3c" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + end + + device cpu_cluster 0 on + chip cpu/intel/model_2065x + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x17aa 0x2193 + end + device pci 02.0 on # VGA controller + subsystemid 0x17aa 0x215a + end + chip southbridge/intel/ibexpeak + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "2" + register "gpi13_routing" = "2" + + register "sata_port_map" = "0x33" + + register "gpe0_en" = "0x20022046" + register "alt_gp_smi_en" = "0x0000" + register "gen1_dec" = "0x7c1601" + register "gen2_dec" = "0x0c15e1" + register "gen3_dec" = "0x1c1681" + register "gen4_dec" = "0x040069" + + device pci 16.2 on # IDE/SATA + subsystemid 0x17aa 0x2161 + end + + device pci 19.0 on # Ethernet + subsystemid 0x17aa 0x2153 + end + + device pci 1a.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + + device pci 1b.0 on # Audio Controller + subsystemid 0x17aa 0x215e + end + + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2 (wwan) + device pci 1c.3 on end # PCIe Port #4 (Expresscard) + device pci 1c.4 on end # PCIe Port #5 (wlan) + + device pci 1d.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x17aa 0x2166 + chip superio/nsc/pc87382 + device pnp 164e.3 on # Digitizer + io 0x60 = 0x200 + irq 0x29 = 0xb0 + irq 0x70 = 0x5 + irq 0xf0 = 0x82 + end + # IR, not connected + device pnp 164e.2 off end + # GPIO, not connected + device pnp 164e.7 off end + # DLPC, not connected + device pnp 164e.19 off end + end + end + device pci 1f.2 on # IDE/SATA + subsystemid 0x17aa 0x2168 + end + device pci 1f.3 on # SMBUS + subsystemid 0x17aa 0x2167 + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_x201/dock.c b/src/mainboard/lenovo/thinkpad_x201/dock.c new file mode 100644 index 0000000..3dba5e1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/dock.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define __SIMPLE_DEVICE__ +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> +#include <delay.h> +#include "dock.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "ec/lenovo/h8/h8.h" +#include <ec/acpi/ec.h> + +void h8_mainboard_init_dock (void) +{ + if (dock_present()) { + printk(BIOS_DEBUG, "dock is connected\n"); + dock_connect(); + } else + printk(BIOS_DEBUG, "dock is not connected\n"); +} + +void dock_connect(void) +{ + u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + + ec_set_bit(0x02, 0); + ec_set_bit(0x1a, 0); + ec_set_bit(0xfe, 4); + + outl(inl(gpiobase + 0x0c) | (1 << 28), gpiobase + 0x0c); +} + +void dock_disconnect(void) +{ + u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + + ec_clr_bit(0x02, 0); + ec_clr_bit(0x1a, 0); + ec_clr_bit(0xfe, 4); + + outl(inl(gpiobase + 0x0c) & ~(1 << 28), gpiobase + 0x0c); +} + +int dock_present(void) +{ + u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; + u8 st = inb(gpiobase + 0x0c); + + return ((st >> 3) & 7) != 7; +} diff --git a/src/mainboard/lenovo/thinkpad_x201/dock.h b/src/mainboard/lenovo/thinkpad_x201/dock.h new file mode 100644 index 0000000..cfb43f0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/dock.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef THINKPAD_X201_DOCK_H +#define THINKPAD_X201_DOCK_H + +extern void dock_connect(void); +extern void dock_disconnect(void); +extern int dock_present(void); +#endif diff --git a/src/mainboard/lenovo/thinkpad_x201/dsdt.asl b/src/mainboard/lenovo/thinkpad_x201/dsdt.asl new file mode 100644 index 0000000..62616a8 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/dsdt.asl @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP04_IS_EXPRESSCARD 1 +#define EC_LENOVO_H8_ME_WORKAROUND 1 +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, /* DSDT revision: ACPI v3.0 */ + "COREv4", /* OEM id */ + "COREBOOT", /* OEM table id */ + 0x20130325 /* OEM revision */ +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + + /* global NVS and variables */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + /* General Purpose Events */ + #include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/nehalem/acpi/nehalem.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + Device (UNCR) + { + Name (_BBN, 0xFF) + Name (_ADR, 0x00) + Name (RID, 0x00) + Name (_HID, EisaId ("PNP0A03")) + Name (_CRS, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* Granularity */ + 0x00FF, /* Range Minimum */ + 0x00FF, /* Range Maximum */ + 0x0000, /* Translation Offset */ + 0x0001, /* Length */ + ,, ) + }) + Device (SAD) + { + Name (_ADR, 0x01) + Name (RID, 0x00) + OperationRegion (SADC, PCI_Config, 0x00, 0x0100) + Field (SADC, DWordAcc, NoLock, Preserve) + { + Offset (0x40), + PAM0, 8, + PAM1, 8, + PAM2, 8, + PAM3, 8, + PAM4, 8, + PAM5, 8, + PAM6, 8 + } + } + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> + + /* Dock support code */ + #include "acpi/dock.asl" +} diff --git a/src/mainboard/lenovo/thinkpad_x201/fadt.c b/src/mainboard/lenovo/thinkpad_x201/fadt.c new file mode 100644 index 0000000..0639026 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = + pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + 0x40) & 0xfffe; + + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (unsigned long)facs; + fadt->dsdt = (unsigned long)dsdt; + fadt->model = 0x00; + fadt->preferred_pm_profile = PM_MOBILE; + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = APM_CNT_PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 0x10; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = APM_CNT_CST_CONTROL; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 0x23; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x00; + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_DOCKING_SUPPORTED; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 0; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 32; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 0; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 0; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_x201/gpio.h b/src/mainboard/lenovo/thinkpad_x201/gpio.h new file mode 100644 index 0000000..f01c9d9 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/gpio.h @@ -0,0 +1,405 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef LENOVO_X201_GPIO_H +#define LENOVO_X201_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_NATIVE, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set1 pch_gpio_set1_reset = { + .gpio0 = GPIO_RESET_PWROK, + .gpio1 = GPIO_RESET_PWROK, + .gpio2 = GPIO_RESET_PWROK, + .gpio3 = GPIO_RESET_PWROK, + .gpio4 = GPIO_RESET_PWROK, + .gpio5 = GPIO_RESET_PWROK, + .gpio6 = GPIO_RESET_PWROK, + .gpio7 = GPIO_RESET_PWROK, + .gpio8 = GPIO_RESET_PWROK, + .gpio9 = GPIO_RESET_PWROK, + .gpio10 = GPIO_RESET_PWROK, + .gpio11 = GPIO_RESET_PWROK, + .gpio12 = GPIO_RESET_PWROK, + .gpio13 = GPIO_RESET_PWROK, + .gpio14 = GPIO_RESET_PWROK, + .gpio15 = GPIO_RESET_PWROK, + .gpio16 = GPIO_RESET_PWROK, + .gpio17 = GPIO_RESET_PWROK, + .gpio18 = GPIO_RESET_PWROK, + .gpio19 = GPIO_RESET_PWROK, + .gpio20 = GPIO_RESET_PWROK, + .gpio21 = GPIO_RESET_PWROK, + .gpio22 = GPIO_RESET_PWROK, + .gpio23 = GPIO_RESET_PWROK, + .gpio24 = GPIO_RESET_RSMRST, + .gpio25 = GPIO_RESET_PWROK, + .gpio26 = GPIO_RESET_PWROK, + .gpio27 = GPIO_RESET_PWROK, + .gpio28 = GPIO_RESET_PWROK, + .gpio29 = GPIO_RESET_PWROK, + .gpio30 = GPIO_RESET_RSMRST, + .gpio31 = GPIO_RESET_PWROK, +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_INPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_OUTPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_HIGH, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_HIGH, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_HIGH, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_HIGH, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio0 = GPIO_NO_BLINK, + .gpio1 = GPIO_NO_BLINK, + .gpio2 = GPIO_NO_BLINK, + .gpio3 = GPIO_NO_BLINK, + .gpio4 = GPIO_NO_BLINK, + .gpio5 = GPIO_NO_BLINK, + .gpio6 = GPIO_NO_BLINK, + .gpio7 = GPIO_NO_BLINK, + .gpio8 = GPIO_NO_BLINK, + .gpio9 = GPIO_NO_BLINK, + .gpio10 = GPIO_NO_BLINK, + .gpio11 = GPIO_NO_BLINK, + .gpio12 = GPIO_NO_BLINK, + .gpio13 = GPIO_NO_BLINK, + .gpio14 = GPIO_NO_BLINK, + .gpio15 = GPIO_NO_BLINK, + .gpio16 = GPIO_NO_BLINK, + .gpio17 = GPIO_NO_BLINK, + .gpio18 = GPIO_NO_BLINK, + .gpio19 = GPIO_NO_BLINK, + .gpio20 = GPIO_NO_BLINK, + .gpio21 = GPIO_NO_BLINK, + .gpio22 = GPIO_NO_BLINK, + .gpio23 = GPIO_NO_BLINK, + .gpio24 = GPIO_NO_BLINK, + .gpio25 = GPIO_NO_BLINK, + .gpio26 = GPIO_NO_BLINK, + .gpio27 = GPIO_NO_BLINK, + .gpio28 = GPIO_NO_BLINK, + .gpio29 = GPIO_NO_BLINK, + .gpio30 = GPIO_NO_BLINK, + .gpio31 = GPIO_NO_BLINK, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_NO_INVERT, + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_INVERT, + .gpio3 = GPIO_NO_INVERT, + .gpio4 = GPIO_NO_INVERT, + .gpio5 = GPIO_NO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_INVERT, + .gpio8 = GPIO_NO_INVERT, + .gpio9 = GPIO_NO_INVERT, + .gpio10 = GPIO_NO_INVERT, + .gpio11 = GPIO_NO_INVERT, + .gpio12 = GPIO_NO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_NO_INVERT, + .gpio15 = GPIO_NO_INVERT, + .gpio16 = GPIO_INVERT, + .gpio17 = GPIO_NO_INVERT, + .gpio18 = GPIO_NO_INVERT, + .gpio19 = GPIO_NO_INVERT, + .gpio20 = GPIO_NO_INVERT, + .gpio21 = GPIO_NO_INVERT, + .gpio22 = GPIO_NO_INVERT, + .gpio23 = GPIO_NO_INVERT, + .gpio24 = GPIO_NO_INVERT, + .gpio25 = GPIO_NO_INVERT, + .gpio26 = GPIO_NO_INVERT, + .gpio27 = GPIO_NO_INVERT, + .gpio28 = GPIO_NO_INVERT, + .gpio29 = GPIO_NO_INVERT, + .gpio30 = GPIO_NO_INVERT, + .gpio31 = GPIO_NO_INVERT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_GPIO, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_NATIVE, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_NATIVE, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_OUTPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_OUTPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_OUTPUT, + .gpio50 = GPIO_DIR_OUTPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_OUTPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_OUTPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_HIGH, + .gpio36 = GPIO_LEVEL_HIGH, + .gpio37 = GPIO_LEVEL_HIGH, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_HIGH, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_LOW, + .gpio54 = GPIO_LEVEL_LOW, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_LOW, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio58 = GPIO_LEVEL_LOW, + .gpio59 = GPIO_LEVEL_LOW, + .gpio60 = GPIO_LEVEL_LOW, + .gpio61 = GPIO_LEVEL_LOW, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_NATIVE, + .gpio69 = GPIO_MODE_NATIVE, + .gpio70 = GPIO_MODE_NATIVE, + .gpio71 = GPIO_MODE_NATIVE, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_OUTPUT, + .gpio69 = GPIO_DIR_OUTPUT, + .gpio70 = GPIO_DIR_OUTPUT, + .gpio71 = GPIO_DIR_OUTPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_LOW, + .gpio65 = GPIO_LEVEL_LOW, + .gpio66 = GPIO_LEVEL_LOW, + .gpio67 = GPIO_LEVEL_LOW, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_LOW, + .gpio71 = GPIO_LEVEL_LOW, + .gpio72 = GPIO_LEVEL_LOW, + .gpio73 = GPIO_LEVEL_LOW, + .gpio74 = GPIO_LEVEL_LOW, + .gpio75 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_map x201_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; + +#endif diff --git a/src/mainboard/lenovo/thinkpad_x201/hda_verb.c b/src/mainboard/lenovo/thinkpad_x201/hda_verb.c new file mode 100644 index 0000000..22634f0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/hda_verb.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Vladimir Serbinenko. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License, + * or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x14F15069, /* Codec Vendor / Device ID: Conexant CX20585 */ + 0x17AA2155, /* Subsystem ID */ + 0x0000000B, /* Number of 4 dword sets */ + + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x17AA2155), + + /* NID 0x19: Headphone jack. */ + AZALIA_PIN_CFG(0x0, 0x19, 0x042140F0), + + /* NID 0x1A: Dock mic jack. */ + AZALIA_PIN_CFG(0x0, 0x1A, 0x61A190F0), + + /* NID 0x1B: Mic jack. */ + AZALIA_PIN_CFG(0x0, 0x1B, 0x04A190F0), + + /* NID 0x1C: Dock headphone jack. */ + AZALIA_PIN_CFG(0x0, 0x1C, 0x612140F0), + + /* NID 0x1D: EAPD detect. */ + AZALIA_PIN_CFG(0x0, 0x1D, 0x601700F0), + + /* NID 0x1E */ + AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), + + /* NID 0x1F */ + AZALIA_PIN_CFG(0x0, 0x1F, 0x901701F0), + + /* NID 0x20 */ + AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), + + /* NID 0x22 */ + AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), + + /* NID 0x23: Internal mic boost volume. */ + AZALIA_PIN_CFG(0x0, 0x23, 0x90A601F0), + + 0x80862804, /* Codec Vendor / Device ID: Intel Ibexpeak HDMI. */ + 0x17aa21b5, /* Subsystem ID */ + 0x00000004, /* Number of 4 dword sets */ + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x17aa21b5 */ + AZALIA_SUBVENDOR(0x3, 0x17AA21B5), + + /* NID 0x04. */ + AZALIA_PIN_CFG(0x3, 0x04, 0x58560010), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560020), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x58560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_x201/irq_tables.c b/src/mainboard/lenovo/thinkpad_x201/irq_tables.c new file mode 100644 index 0000000..bf8574f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/irq_tables.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 16, + 0x00, (0x1f << 3) | 0x0, + 0x0000, + 0x8086, 0x3b07, + 0x00000000, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }, /* u8 rfu[11] */ + 0x20,/* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, { link, bitmap }, { link, bitmap }, { link, bitmap }, { link, bitmap }, slot, rfu */ + { 0x00, (0x00 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x01 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x02 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x16 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x19 << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x1a << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1b << 3) | 0x0, { { 0x00, 0xdef8 }, { 0x02, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x3, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1c << 3) | 0x4, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1d << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1e << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x0, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x2, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x3, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + { 0x00, (0x1f << 3) | 0x6, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lenovo/thinkpad_x201/mainboard.c b/src/mainboard/lenovo/thinkpad_x201/mainboard.c new file mode 100644 index 0000000..5b76be2 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/mainboard.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <ec/lenovo/pmh7/pmh7.h> +#include <ec/acpi/ec.h> +#include <ec/lenovo/h8/h8.h> +#include <northbridge/intel/nehalem/nehalem.h> +#include <southbridge/intel/bd82x6x/pch.h> + +#include <pc80/mc146818rtc.h> +#include "dock.h" +#include <arch/x86/include/arch/acpigen.h> +#include <drivers/intel/gma/int15.h> +#include <arch/interrupt.h> +#include <pc80/keyboard.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <smbios.h> +#include <build.h> +#include "drivers/lenovo/lenovo.h" + +static acpi_cstate_t cst_entries[] = { + {1, 1, 1000, {0x7f, 1, 2, {0}, 1, 0}}, + {2, 1, 500, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV2, 0}}, + {2, 17, 250, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV3, 0}}, +}; + +int get_cst_entries(acpi_cstate_t ** entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + + + +static void mainboard_init(device_t dev) +{ + printk(BIOS_SPEW, "starting SPI configuration\n"); + + /* Configure SPI. */ + RCBA32(0x3800) = 0x07ff0500; + RCBA32(0x3804) = 0x3f046008; + RCBA32(0x3808) = 0x0058efc0; + RCBA32(0x384c) = 0x92000000; + RCBA32(0x3850) = 0x00000a0b; + RCBA32(0x3858) = 0x07ff0500; + RCBA32(0x385c) = 0x04ff0003; + RCBA32(0x3860) = 0x00020001; + RCBA32(0x3864) = 0x00000fff; + RCBA32(0x3874) = 0; + RCBA32(0x3890) = 0xf8400000; + RCBA32(0x3894) = 0x143b5006; + RCBA32(0x3898) = 0x05200302; + RCBA32(0x389c) = 0x0601209f; + RCBA32(0x38b0) = 0x00000004; + RCBA32(0x38b4) = 0x03040002; + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + RCBA32(0x3804) = 0x3f04e008; + + printk(BIOS_SPEW, "SPI configured\n"); + /* This sneaked in here, because X201 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(); + + /* Enable expresscard hotplug events. */ + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0xd8, + pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) + | (1 << 30)); + pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0x42, 0x142); +} + +static void fill_ssdt(void) +{ + drivers_lenovo_serial_ports_ssdt_generate("\_SB.PCI0.LPCB", 0); +} + +static void mainboard_enable(device_t dev) +{ + device_t dev0; + u16 pmbase; + + dev->ops->init = mainboard_init; + dev->ops->acpi_fill_ssdt_generator = fill_ssdt; + + pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PMBASE) & 0xff80; + + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + + outl(0, pmbase + SMI_EN); + + enable_lapic(); + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE, + DEFAULT_GPIOBASE | 1); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL, + 0x10); + + /* If we're resuming from suspend, blink suspend LED */ + dev0 = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) + ec_write(0x0c, 0xc7); + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_LFP, 2); + +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_x201/mptable.c b/src/mainboard/lenovo/thinkpad_x201/mptable.c new file mode 100644 index 0000000..84364a0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/mptable.c @@ -0,0 +1,82 @@ +/* generated by MPTable, version 2.0.15*/ +/* as modified by RGM for coreboot */ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#define INTA 0x00 +#define INTB 0x01 +#define INTC 0x02 +#define INTD 0x03 + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 0x2, 0x20, 0xfec00000); + + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + 0x2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x1, 0x2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x0, 0x2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x3, 0x2, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x4, 0x2, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x5, 0x2, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x6, 0x2, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x7, 0x2, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x8, 0x2, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0x9, 0x2, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xa, 0x2, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xb, 0x2, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xc, 0x2, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xd, 0x2, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xe, 0x2, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + 0x3, 0xf, 0x2, 0xf); + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_lintsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + MP_APIC_ALL, 0x0); + smp_write_lintsrc(mc, mp_NMI, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, + MP_APIC_ALL, 0x1); + + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lenovo/thinkpad_x201/romstage.c b/src/mainboard/lenovo/thinkpad_x201/romstage.c new file mode 100644 index 0000000..2c3dfd1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/romstage.c @@ -0,0 +1,348 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <ec/acpi/ec.h> +#include <delay.h> +#include <timestamp.h> +#include <arch/acpi.h> +#include <cbmem.h> + +#include "gpio.h" +#include "dock.h" +#include "arch/early_variables.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "northbridge/intel/nehalem/nehalem.h" + +#include "northbridge/intel/nehalem/raminit.h" +#include "southbridge/intel/ibexpeak/me.h" + +static void pch_enable_lpc(void) +{ + /* X201 EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN | GAMEL_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN3_DEC, 0x1c1681); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, (0x68 & ~3) | 0x00040001); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xd0, 0x0); + pci_write_config32(PCH_LPC_DEV, 0xdc, 0x8); + + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + (pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) & ~2) | 1); + + pci_write_config32(PCH_LPC_DEV, ETR3, + pci_read_config32(PCH_LPC_DEV, ETR3) & ~ETR3_CF9GR); +} + +static void rcba_config(void) +{ + static const u32 rcba_dump3[] = { + /* 30fc */ 0x00000000, + /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, + /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, + /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, + /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, + /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, + /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, + /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, + /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, + /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3340 */ 0x000fffff, 0x00000000, 0x00000000, 0x00000000, + /* 3350 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3360 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3370 */ 0x00000000, 0x00000000, 0x7f8fdfff, 0x00000000, + /* 3380 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3390 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33a0 */ 0x00003900, 0x00000000, 0x00000000, 0x00000000, + /* 33b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33c0 */ 0x00010000, 0x00000000, 0x00000000, 0x0001004b, + /* 33d0 */ 0x06000008, 0x00010000, 0x00000000, 0x00000000, + /* 33e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3400 */ 0x0000001c, 0x00000080, 0x00000000, 0x00000000, + /* 3410 */ 0x00000c61, 0x00000000, 0x16e41fe1, 0xbf4f001f, + /* 3420 */ 0x00000000, 0x00060010, 0x0000001d, 0x00000000, + /* 3430 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3440 */ 0xdeaddeed, 0x00000000, 0x00000000, 0x00000000, + /* 3450 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3460 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3470 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3480 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3490 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3500 */ 0x20000557, 0x2000055f, 0x2000074b, 0x2000074b, + /* 3510 */ 0x20000557, 0x2000014b, 0x2000074b, 0x2000074b, + /* 3520 */ 0x2000074b, 0x2000074b, 0x2000055f, 0x2000055f, + /* 3530 */ 0x20000557, 0x2000055f, 0x00000000, 0x00000000, + /* 3540 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3550 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3560 */ 0x00000001, 0x000026a3, 0x00040002, 0x01000052, + /* 3570 */ 0x02000772, 0x16000f8f, 0x1800ff4f, 0x0001d630, + /* 3580 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3590 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35a0 */ 0xfc000201, 0x3c000201, 0x00000000, 0x00000000, + /* 35b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x0a001f00, 0x00000000, 0x00000000, 0x00000001, + /* 3610 */ 0x00010000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3610 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3620 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3630 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3640 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3650 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3660 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3670 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3680 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3690 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36b0 */ 0x00000000, 0x089c0018, 0x00000000, 0x00000000, + /* 36c0 */ 0x11111111, 0x00000000, 0x00000000, 0x00000000, + /* 36d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, + }; + unsigned i; + for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { + RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x30fc); + } +} + +static inline void write_acpi32(u32 addr, u32 val) +{ + outl(val, DEFAULT_PMBASE | addr); +} + +static inline void write_acpi16(u32 addr, u16 val) +{ + outw(val, DEFAULT_PMBASE | addr); +} + +static inline u32 read_acpi32(u32 addr) +{ + return inl(DEFAULT_PMBASE | addr); +} + +static inline u16 read_acpi16(u32 addr) +{ + return inw(DEFAULT_PMBASE | addr); +} + +static void set_fsb_frequency(void) +{ + u8 block[5]; + u16 fsbfreq = 62879; + smbus_block_read(0x69, 0, 5, block); + block[0] = fsbfreq; + block[1] = fsbfreq >> 8; + + smbus_block_write(0x69, 0, 5, block); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 reg32; + int s3resume = 0; + const u8 spd_addrmap[4] = { 0x50, 0, 0x51, 0 }; + + timestamp_init(rdtsc ()); + + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + nehalem_early_initialization(NEHALEM_MOBILE); + + pch_enable_lpc(); + + /* Enable USB Power. We need to do it early for usbdebug to work. */ + ec_set_bit(0x3b, 4); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + + setup_pch_gpios(&x201_gpio_map); + + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + u8 reg8; + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + printk(BIOS_DEBUG, "a2: %02x\n", reg8); + if (!(reg8 & 0x20)) { + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "Bad resume from S3 detected.\n"); + } else { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + s3resume = 1; + } else { + printk(BIOS_DEBUG, + "Resume from S3 detected, but disabled.\n"); + } + } + } + + /* Enable SMBUS. */ + enable_smbus(); + + outb((inb(DEFAULT_GPIOBASE | 0x3a) & ~0x2) | 0x20, + DEFAULT_GPIOBASE | 0x3a); + outb(0x50, 0x15ec); + outb(inb(0x15ee) & 0x70, 0x15ee); + + write_acpi16(0x2, 0x0); + write_acpi32(0x28, 0x0); + write_acpi32(0x2c, 0x0); + if (!s3resume) { + read_acpi32(0x4); + read_acpi32(0x20); + read_acpi32(0x34); + write_acpi16(0x0, 0x900); + write_acpi32(0x20, 0xffff7ffe); + write_acpi32(0x34, 0x56974); + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) | 2); + } + + early_thermal_init(); + + timestamp_add_now(TS_BEFORE_INITRAM); + + chipset_init(s3resume); + + set_fsb_frequency(); + + raminit(s3resume, spd_addrmap); + + timestamp_add_now(TS_AFTER_INITRAM); + + intel_early_me_status(); + + if (s3resume) { + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if (s3resume) { + void *resume_backup_memory; + + resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + quick_ram_check(); + } +#endif + + timestamp_add_now(TS_END_ROMSTAGE); +} diff --git a/src/mainboard/lenovo/thinkpad_x201/smi.h b/src/mainboard/lenovo/thinkpad_x201/smi.h new file mode 100644 index 0000000..38a3027 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/smi.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_LENOVO_X60_SMI_H +#define MAINBOARD_LENOVO_X60_SMI_H + +#define SMI_DOCK_CONNECT 0x01 +#define SMI_DOCK_DISCONNECT 0x02 + +#endif diff --git a/src/mainboard/lenovo/thinkpad_x201/smihandler.c b/src/mainboard/lenovo/thinkpad_x201/smihandler.c new file mode 100644 index 0000000..ad3911c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x201/smihandler.c @@ -0,0 +1,222 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/ibexpeak/nvs.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "southbridge/intel/ibexpeak/me.h" +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_2065x/model_2065x.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include "dock.h" +#include "smi.h" + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + case SMI_DOCK_CONNECT: + ec_clr_bit(0x03, 2); + udelay(250000); + dock_connect(); + ec_set_bit(0x03, 2); + /* set dock LED to indicate status */ + ec_write(0x0c, 0x09); + ec_write(0x0c, 0x88); + break; + + case SMI_DOCK_DISCONNECT: + ec_clr_bit(0x03, 2); + dock_disconnect(); + break; + + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + case 0x14: + /* brightness up */ + mainboard_smi_brightness_up(); + break; + case 0x15: + /* brightness down */ + mainboard_smi_brightness_down(); + break; + case 0x18: + /* Fn-F9 key */ + case 0x27: + /* Power loss */ + case 0x50: + /* Undock Key */ + mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); + break; + case 0x37: + case 0x58: + /* Dock Event */ + mainboard_io_trap_handler(SMI_DOCK_CONNECT); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 1)) + mainboard_smi_handle_ec_sci(); +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_2065x_finalize_smm(); + + mainboard_finalized = 1; + break; + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + default: + break; + } + return 0; +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ == 3) { + u8 ec_wake = ec_read(0x32); + /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ + if (ec_wake & 0x14) { + u32 gpe_rout; + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* Enable EC WAKE GPE. */ + outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); + gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); + /* Redirect EC WAKE GPE to SCI. */ + gpe_rout &= ~(3 << 26); + gpe_rout |= (2 << 26); + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x220/Kconfig b/src/mainboard/lenovo/thinkpad_x220/Kconfig new file mode 100644 index 0000000..681dc84 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/Kconfig @@ -0,0 +1,80 @@ +if BOARD_LENOVO_THINKPAD_X220 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_C216 + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select INTEL_INT15 + select EARLY_CBMEM_INIT + select VGA + select INTEL_EDID + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select SANDYBRIDGE_LVDS + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config MAINBOARD_DIR + string + default lenovo/thinkpad_x220 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad X220" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 10 + +config VGA_BIOS_FILE + string + default "pci8086,0126.rom" + +config VGA_BIOS_ID + string + default "8086,0126" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x17aa + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x21db + +endif # BOARD_LENOVO_THINKPAD_X220 diff --git a/src/mainboard/lenovo/thinkpad_x220/Makefile.inc b/src/mainboard/lenovo/thinkpad_x220/Makefile.inc new file mode 100644 index 0000000..265059a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +romstage-y += gpio.c diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_x220/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_x220/acpi/gpe.asl new file mode 100644 index 0000000..80bee71 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi/gpe.asl @@ -0,0 +1,13 @@ + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP04.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP04.HPCS) + If (_SB.PCI0.RP04.PDC) + { + Store (0x01, _SB.PCI0.RP04.PDC) + Notify (_SB.PCI0.RP04, 0x00) + } + } + } diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_x220/acpi/platform.asl new file mode 100644 index 0000000..72b9dbf --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi/platform.asl @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* ME may not be up yet. */ + Store (0, _TZ.MEB1) + Store (0, _TZ.MEB2) + + /* Not implemented. */ + Return(Package(){0,0}) +} diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x220/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_x220/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/thinkpad_x220/acpi_tables.c b/src/mainboard/lenovo/thinkpad_x220/acpi_tables.c new file mode 100644 index 0000000..26a459d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/acpi_tables.c @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // the lid is open by default. + gnvs->lids = 1; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_x220/board_info.txt b/src/mainboard/lenovo/thinkpad_x220/board_info.txt new file mode 100644 index 0000000..689ca8f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_x220/cmos.default b/src/mainboard/lenovo/thinkpad_x220/cmos.default new file mode 100644 index 0000000..ef3e920 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/cmos.default @@ -0,0 +1,17 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +touchpad=Enable +sata_mode=AHCI +fn_ctrl_swap=Disable +sticky_fn=Disable +trackpoint=Enable +hyper_threading=Enable diff --git a/src/mainboard/lenovo/thinkpad_x220/cmos.layout b/src/mainboard/lenovo/thinkpad_x220/cmos.layout new file mode 100644 index 0000000..cf64f92 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/cmos.layout @@ -0,0 +1,167 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +415 1 e 1 wlan +416 1 e 1 trackpoint +417 1 e 1 fn_ctrl_swap +418 1 e 1 sticky_fn +419 1 e 1 power_management_beeps +421 1 e 9 sata_mode +#422 2 r 1 unused + +# coreboot config options: cpu +424 1 e 2 hyper_threading +#425 7 r 0 unused + +# coreboot config options: northbridge +432 3 e 11 gfx_uma_size +#435 549 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 Both +10 1 Keyboard only +10 2 Thinklight only +10 3 None +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/lenovo/thinkpad_x220/devicetree.cb b/src/mainboard/lenovo/thinkpad_x220/devicetree.cb new file mode 100644 index 0000000..dc129c0 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/devicetree.cb @@ -0,0 +1,188 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "5" + register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms + register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms + register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "0" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "4" + register "gpu_cpu_backlight" = "0x1155" + register "gpu_pch_backlight" = "0x06100610" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on + subsystemid 0x17aa 0x21db + end # host bridge + device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 02.0 on + subsystemid 0x17aa 0x21db + end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0000" + register "gpi1_routing" = "2" + register "gpi8_routing" = "2" + + # Enable SATA ports 0 (HDD bay) & 1 (dock) & 2 (msata) + register "sata_port_map" = "0x7" + # Set max SATA speed to 6.0 Gb/s + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x7c1601" + register "gen2_dec" = "0x0c15e1" + register "gen4_dec" = "0x0c06a1" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 16.0 on + subsystemid 0x17aa 0x21db + end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on + subsystemid 0x17aa 0x21ce + end # Intel Gigabit Ethernet + device pci 1a.0 on + subsystemid 0x17aa 0x21db + end # USB2 EHCI #2 + device pci 1b.0 on + subsystemid 0x17aa 0x21db + end # High Definition Audio + device pci 1c.0 on + subsystemid 0x17aa 0x21db + end # PCIe Port #1 + device pci 1c.1 on + subsystemid 0x17aa 0x21db + end # PCIe Port #2 (wlan) + device pci 1c.2 on + subsystemid 0x17aa 0x21db + end # PCIe Port #3 + device pci 1c.3 on + subsystemid 0x17aa 0x21db + end # PCIe Port #4 + device pci 1c.4 on + subsystemid 0x17aa 0x21db + device pci 00.0 on + subsystemid 0x17aa 0x21db + end + device pci 00.1 on + subsystemid 0x17aa 0x21db + end + end # PCIe Port #5 (SD) + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on + subsystemid 0x17aa 0x21db + end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on #LPC bridge + subsystemid 0x17aa 0x21db + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x01" + register "config2" = "0xa0" + register "config3" = "0x60" + + register "has_keyboard_backlight" = "0" + + register "beepmask0" = "0x00" + register "beepmask1" = "0x86" + register "has_power_management_beeps" = "1" + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xd0" + register "event5_enable" = "0xfc" + register "event6_enable" = "0x00" + register "event7_enable" = "0x81" + register "event8_enable" = "0x7b" + register "event9_enable" = "0xff" + register "eventa_enable" = "0x01" + register "eventb_enable" = "0xf0" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "evente_enable" = "0x0d" + end + end # LPC bridge + device pci 1f.2 on + subsystemid 0x17aa 0x21db + end # SATA Controller 1 + device pci 1f.3 on + subsystemid 0x17aa 0x21db + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on + subsystemid 0x17aa 0x21db + end # Thermal + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_x220/dsdt.asl b/src/mainboard/lenovo/thinkpad_x220/dsdt.asl new file mode 100644 index 0000000..b6b4b33 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/dsdt.asl @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP04_IS_EXPRESSCARD 1 +#define EC_LENOVO_H8_ME_WORKAROUND 1 +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/lenovo/thinkpad_x220/fadt.c b/src/mainboard/lenovo/thinkpad_x220/fadt.c new file mode 100644 index 0000000..27e6303 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_x220/gpio.c b/src/mainboard/lenovo/thinkpad_x220/gpio.c new file mode 100644 index 0000000..83a0db3 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/gpio.c @@ -0,0 +1,380 @@ +#include "southbridge/intel/bd82x6x/gpio.h" +static const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_GPIO, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_INPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_LOW, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_HIGH, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_LOW, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio0 = GPIO_INVERT, + .gpio1 = GPIO_INVERT, + .gpio2 = GPIO_NO_INVERT, + .gpio3 = GPIO_NO_INVERT, + .gpio4 = GPIO_NO_INVERT, + .gpio5 = GPIO_NO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio7 = GPIO_NO_INVERT, + .gpio8 = GPIO_NO_INVERT, + .gpio9 = GPIO_NO_INVERT, + .gpio10 = GPIO_NO_INVERT, + .gpio11 = GPIO_NO_INVERT, + .gpio12 = GPIO_NO_INVERT, + .gpio13 = GPIO_INVERT, + .gpio14 = GPIO_NO_INVERT, + .gpio15 = GPIO_NO_INVERT, + .gpio16 = GPIO_NO_INVERT, + .gpio17 = GPIO_NO_INVERT, + .gpio18 = GPIO_NO_INVERT, + .gpio19 = GPIO_NO_INVERT, + .gpio20 = GPIO_NO_INVERT, + .gpio21 = GPIO_NO_INVERT, + .gpio22 = GPIO_NO_INVERT, + .gpio23 = GPIO_NO_INVERT, + .gpio24 = GPIO_NO_INVERT, + .gpio25 = GPIO_NO_INVERT, + .gpio26 = GPIO_NO_INVERT, + .gpio27 = GPIO_NO_INVERT, + .gpio28 = GPIO_NO_INVERT, + .gpio29 = GPIO_NO_INVERT, + .gpio30 = GPIO_NO_INVERT, + .gpio31 = GPIO_NO_INVERT, +}; + +static const struct pch_gpio_set1 pch_gpio_set1_blink = { + .gpio0 = GPIO_NO_BLINK, + .gpio1 = GPIO_NO_BLINK, + .gpio2 = GPIO_NO_BLINK, + .gpio3 = GPIO_NO_BLINK, + .gpio4 = GPIO_NO_BLINK, + .gpio5 = GPIO_NO_BLINK, + .gpio6 = GPIO_NO_BLINK, + .gpio7 = GPIO_NO_BLINK, + .gpio8 = GPIO_NO_BLINK, + .gpio9 = GPIO_NO_BLINK, + .gpio10 = GPIO_NO_BLINK, + .gpio11 = GPIO_NO_BLINK, + .gpio12 = GPIO_NO_BLINK, + .gpio13 = GPIO_NO_BLINK, + .gpio14 = GPIO_NO_BLINK, + .gpio15 = GPIO_NO_BLINK, + .gpio16 = GPIO_NO_BLINK, + .gpio17 = GPIO_NO_BLINK, + .gpio18 = GPIO_NO_BLINK, + .gpio19 = GPIO_NO_BLINK, + .gpio20 = GPIO_NO_BLINK, + .gpio21 = GPIO_NO_BLINK, + .gpio22 = GPIO_NO_BLINK, + .gpio23 = GPIO_NO_BLINK, + .gpio24 = GPIO_NO_BLINK, + .gpio25 = GPIO_NO_BLINK, + .gpio26 = GPIO_NO_BLINK, + .gpio27 = GPIO_NO_BLINK, + .gpio28 = GPIO_NO_BLINK, + .gpio29 = GPIO_NO_BLINK, + .gpio30 = GPIO_NO_BLINK, + .gpio31 = GPIO_NO_BLINK, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_GPIO, + .gpio43 = GPIO_MODE_NATIVE, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_OUTPUT, + .gpio34 = GPIO_DIR_INPUT, + .gpio35 = GPIO_DIR_OUTPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_OUTPUT, + .gpio43 = GPIO_DIR_INPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_HIGH, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_LOW, + .gpio39 = GPIO_LEVEL_HIGH, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_LOW, + .gpio49 = GPIO_LEVEL_LOW, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_LOW, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_LOW, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +static const struct pch_gpio_set2 pch_gpio_set2_blink = { + .gpio32 = GPIO_NO_BLINK, + .gpio33 = GPIO_NO_BLINK, + .gpio34 = GPIO_NO_BLINK, + .gpio35 = GPIO_NO_BLINK, + .gpio36 = GPIO_NO_BLINK, + .gpio37 = GPIO_NO_BLINK, + .gpio38 = GPIO_NO_BLINK, + .gpio39 = GPIO_NO_BLINK, + .gpio40 = GPIO_NO_BLINK, + .gpio41 = GPIO_NO_BLINK, + .gpio42 = GPIO_NO_BLINK, + .gpio43 = GPIO_NO_BLINK, + .gpio44 = GPIO_NO_BLINK, + .gpio45 = GPIO_NO_BLINK, + .gpio46 = GPIO_NO_BLINK, + .gpio47 = GPIO_NO_BLINK, + .gpio48 = GPIO_NO_BLINK, + .gpio49 = GPIO_NO_BLINK, + .gpio50 = GPIO_NO_BLINK, + .gpio51 = GPIO_NO_BLINK, + .gpio52 = GPIO_NO_BLINK, + .gpio53 = GPIO_NO_BLINK, + .gpio54 = GPIO_NO_BLINK, + .gpio55 = GPIO_NO_BLINK, + .gpio56 = GPIO_NO_BLINK, + .gpio57 = GPIO_NO_BLINK, + .gpio58 = GPIO_NO_BLINK, + .gpio59 = GPIO_NO_BLINK, + .gpio60 = GPIO_NO_BLINK, + .gpio61 = GPIO_NO_BLINK, + .gpio62 = GPIO_NO_BLINK, + .gpio63 = GPIO_NO_BLINK, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_NATIVE, + .gpio65 = GPIO_MODE_NATIVE, + .gpio66 = GPIO_MODE_NATIVE, + .gpio67 = GPIO_MODE_NATIVE, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_OUTPUT, + .gpio65 = GPIO_DIR_OUTPUT, + .gpio66 = GPIO_DIR_OUTPUT, + .gpio67 = GPIO_DIR_OUTPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +static const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_HIGH, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .blink = &pch_gpio_set1_blink, + .invert = &pch_gpio_set1_invert, + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; diff --git a/src/mainboard/lenovo/thinkpad_x220/hda_verb.c b/src/mainboard/lenovo/thinkpad_x220/hda_verb.c new file mode 100644 index 0000000..6495fd6 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/hda_verb.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Vendor Name : Conexant + * Vendor ID : 0x14f1506e + * Subsystem ID : 0x17aa21db + * Revision ID : 0x100002 + */ + + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x14f1506e, // Codec Vendor / Device ID: Conexant CX20590 + 0x17aa21db, // Subsystem ID + 0x0000000d , // Number of 4 dword sets + +/* Bits 31:28 - Codec Address */ +/* Bits 27:20 - NID */ +/* Bits 19:8 - Verb ID */ +/* Bits 7:0 - Payload */ + +/* NID 0x01 - NodeInfo */ + AZALIA_SUBVENDOR(0x0, 0x17AA21DB), + + AZALIA_PIN_CFG(0x0, 0x19, 0x04211040), + AZALIA_PIN_CFG(0x0, 0x1A, 0x61A19050), + AZALIA_PIN_CFG(0x0, 0x1B, 0x04A11060), + AZALIA_PIN_CFG(0x0, 0x1C, 0x6121401F), + AZALIA_PIN_CFG(0x0, 0x1D, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x1F, 0x90170110), + AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), + AZALIA_PIN_CFG(0x0, 0x23, 0x90A60170), + + /* Misc entries */ + 0x00B707C0, /* Enable PortB as Output with HP amp */ + 0x00D70740, /* Enable PortD as Output */ + 0x0017A200, /* Disable ClkEn of PortSenseTst */ + 0x0017C621, /* Slave Port - Port A used as microphone input for + combo Jack + Master Port - Port B used for Jack Presence Detect + Enable Combo Jack Detection */ + 0x0017A208, /* Enable ClkEn of PortSenseTst */ + 0x00170500, /* Set power state to D0 */ + 0x00170500, /* Padding */ + 0x00170500, /* Padding */ + + /* --- Next Codec --- */ + +/* Vendor Name : Intel + * Vendor ID : 0x80862806 + * Subsystem ID : 0x80860101 + * Revision ID : 0x100000 + */ + /* coreboot specific header */ + 0x80862805, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of IDs + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[] = { + 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_x220/mainboard.c b/src/mainboard/lenovo/thinkpad_x220/mainboard.c new file mode 100644 index 0000000..00e7991 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/mainboard.c @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 Google Inc. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <arch/acpi.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <pc80/keyboard.h> +#include <ec/lenovo/h8/h8.h> +#include <build.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + +static void mainboard_init(device_t dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + + /* This sneaked in here, because X201 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(); + + /* Enable expresscard hotplug events. */ + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0xd8, + pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) + | (1 << 30)); + pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), + 0x42, 0x142); +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +void h8_mainboard_init_dock (void) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_x220/romstage.c b/src/mainboard/lenovo/thinkpad_x220/romstage.c new file mode 100644 index 0000000..ba48fac --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/romstage.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <arch/acpi.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/msr.h> + +void pch_enable_lpc(void) +{ + /* X230 EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xac, + 0x80010000); +} + +void rcba_config(void) +{ + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + RCBA32(FD) = 0x1fe41fe3; + RCBA32(BUC) = 0; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 1, 1 }, + { 1, 1, 3 }, + { 1, 1, 3 }, + { 1, 1, -1 }, + { 1, 1, -1 }, + { 1, 0, 2 }, + { 1, 0, 2 }, + { 1, 1, 6 }, + { 1, 1, 5 }, + { 1, 1, 6 }, + { 1, 1, 6 }, + { 1, 1, 7 }, + { 1, 1, 6 }, +}; + +void mainboard_get_spd(spd_raw_data *spd) { + read_spd (&spd[0], 0x50); + read_spd (&spd[2], 0x51); +} diff --git a/src/mainboard/lenovo/thinkpad_x220/smihandler.c b/src/mainboard/lenovo/thinkpad_x220/smihandler.c new file mode 100644 index 0000000..5bcde1c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/smihandler.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + case 0x14: + /* brightness up */ + mainboard_smi_brightness_up(); + break; + case 0x15: + /* brightness down */ + mainboard_smi_brightness_down(); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + default: + break; + } + return 0; +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ == 3) { + u8 ec_wake = ec_read(0x32); + /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ + if (ec_wake & 0x14) { + u32 gpe_rout; + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* Enable EC WAKE GPE. */ + outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); + gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); + /* Redirect EC WAKE GPE to SCI. */ + gpe_rout &= ~(3 << 26); + gpe_rout |= (2 << 26); + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x220/thermal.h b/src/mainboard/lenovo/thinkpad_x220/thermal.h new file mode 100644 index 0000000..ab24bb1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x220/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef X230_THERMAL_H +#define X230_THERMAL_H + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif diff --git a/src/mainboard/lenovo/thinkpad_x230/Kconfig b/src/mainboard/lenovo/thinkpad_x230/Kconfig new file mode 100644 index 0000000..3b08c01 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/Kconfig @@ -0,0 +1,76 @@ +if BOARD_LENOVO_THINKPAD_X230 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_RPGA989 + select NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_C216 + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select BOARD_ROMSIZE_KB_12288 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select HAVE_ACPI_RESUME + select HAVE_SMI_HANDLER + select INTEL_INT15 + select EARLY_CBMEM_INIT + select VGA + select INTEL_EDID + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + select IVYBRIDGE_LVDS + + # Workaround for EC/KBC IRQ1. + select SERIRQ_CONTINUOUS_MODE + +config HAVE_IFD_BIN + bool + default n + +config HAVE_ME_BIN + bool + default n + +config MAINBOARD_DIR + string + default lenovo/thinkpad_x230 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad X230" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 8 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 10 + +config VGA_BIOS_FILE + string + default "pci8086,0106.rom" + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x17aa + +config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID + hex + default 0x21fa + +endif # BOARD_LENOVO_THINKPAD_X230 diff --git a/src/mainboard/lenovo/thinkpad_x230/Makefile.inc b/src/mainboard/lenovo/thinkpad_x230/Makefile.inc new file mode 100644 index 0000000..265059a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/Makefile.inc @@ -0,0 +1,21 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c +romstage-y += gpio.c diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_x230/acpi/ec.asl new file mode 100644 index 0000000..4b3e72c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi/ec.asl @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> + +Scope(_SB.PCI0.LPCB.EC) +{ +} diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_x230/acpi/gpe.asl new file mode 100644 index 0000000..eb489d5 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi/gpe.asl @@ -0,0 +1,13 @@ + Method (_L01, 0, NotSerialized) + { + If (_SB.PCI0.RP03.HPCS) + { + Sleep (100) + Store (0x01, _SB.PCI0.RP03.HPCS) + If (_SB.PCI0.RP03.PDC) + { + Store (0x01, _SB.PCI0.RP03.PDC) + Notify (_SB.PCI0.RP03, 0x00) + } + } + } diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_x230/acpi/platform.asl new file mode 100644 index 0000000..72b9dbf --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi/platform.asl @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* ME may not be up yet. */ + Store (0, _TZ.MEB1) + Store (0, _TZ.MEB2) + + /* Not implemented. */ + Return(Package(){0,0}) +} diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x230/acpi/sandybridge_pci_irqs.asl new file mode 100644 index 0000000..6c1c695 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi/sandybridge_pci_irqs.asl @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for Sandybridge */ + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB + Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF + Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF + // LPC devices 0:1f.0 + Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) + Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH + Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA + }) + } Else { + Return (Package() { + // Onboard graphics (IGD) 0:2.0 + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // High Definition Audio 0:1b.0 + Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + // PCIe Root Ports 0:1c.x + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #1 0:1d.0 + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, + // EHCI #2 0:1a.0 + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, + // LPC device 0:1f.0 + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_x230/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/thinkpad_x230/acpi_tables.c b/src/mainboard/lenovo/thinkpad_x230/acpi_tables.c new file mode 100644 index 0000000..26a459d --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/acpi_tables.c @@ -0,0 +1,96 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <cbmem.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/cpu.h> +#include <cpu/x86/msr.h> + +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include "thermal.h" + +static void acpi_update_thermal_table(global_nvs_t *gnvs) +{ + gnvs->tcrt = CRITICAL_TEMPERATURE; + gnvs->tpsv = PASSIVE_TEMPERATURE; +} + +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + /* Disable USB ports in S3 by default */ + gnvs->s3u0 = 0; + gnvs->s3u1 = 0; + + /* Disable USB ports in S5 by default */ + gnvs->s5u0 = 0; + gnvs->s5u1 = 0; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; + + // the lid is open by default. + gnvs->lids = 1; + + acpi_update_thermal_table(gnvs); +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_x230/board_info.txt b/src/mainboard/lenovo/thinkpad_x230/board_info.txt new file mode 100644 index 0000000..689ca8f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/board_info.txt @@ -0,0 +1,5 @@ +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lenovo/thinkpad_x230/cmos.default b/src/mainboard/lenovo/thinkpad_x230/cmos.default new file mode 100644 index 0000000..137f482 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/cmos.default @@ -0,0 +1,18 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +volume=0x3 +first_battery=Primary +bluetooth=Enable +wwan=Enable +wlan=Enable +touchpad=Enable +sata_mode=AHCI +fn_ctrl_swap=Disable +sticky_fn=Disable +trackpoint=Enable +hyper_threading=Enable +backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/thinkpad_x230/cmos.layout b/src/mainboard/lenovo/thinkpad_x230/cmos.layout new file mode 100644 index 0000000..7a2eb01 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/cmos.layout @@ -0,0 +1,167 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2014 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +400 8 h 0 volume + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail + +# coreboot config options: EC +411 1 e 8 first_battery +412 1 e 1 bluetooth +413 1 e 1 wwan +414 1 e 1 touchpad +415 1 e 1 wlan +416 1 e 1 trackpoint +417 1 e 1 fn_ctrl_swap +418 1 e 1 sticky_fn +#419 2 r 0 unused +421 1 e 9 sata_mode +422 2 e 10 backlight + +# coreboot config options: cpu +424 1 e 2 hyper_threading +#425 7 r 0 unused + +# coreboot config options: northbridge +432 3 e 11 gfx_uma_size +#435 549 r 0 unused + +# SandyBridge MRC Scrambler Seed values +896 32 r 0 mrc_scrambler_seed +928 32 r 0 mrc_scrambler_seed_s3 +960 16 r 0 mrc_scrambler_seed_chk + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 Both +10 1 Keyboard only +10 2 Thinklight only +10 3 None +11 0 32M +11 1 64M +11 2 96M +11 3 128M +11 4 160M +11 5 192M +11 6 224M + +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/lenovo/thinkpad_x230/devicetree.cb b/src/mainboard/lenovo/thinkpad_x230/devicetree.cb new file mode 100644 index 0000000..1886ba9 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/devicetree.cb @@ -0,0 +1,187 @@ +chip northbridge/intel/sandybridge + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms + register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms + register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms + register "gpu_panel_power_backlight_on_delay" = "2100" # T3: 210ms + register "gpu_panel_power_backlight_off_delay" = "2100" # T4: 210ms + register "gfx.use_spread_spectrum_clock" = "1" + register "gfx.lvds_dual_channel" = "0" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "1" + register "gpu_cpu_backlight" = "0x1155" + register "gpu_pch_backlight" = "0x11551155" + + device cpu_cluster 0 on + chip cpu/intel/socket_rPGA989 + device lapic 0 on end + end + chip cpu/intel/model_206ax + # Magic APIC ID to locate this chip + device lapic 0xACAC off end + + # Coordinate with HW_ALL + register "pstate_coord_type" = "0xfe" + + register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) + + register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) + register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) + register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) + end + end + + device domain 0 on + device pci 00.0 on + subsystemid 0x17aa 0x21fa + end # host bridge + device pci 01.0 off end # PCIe Bridge for discrete graphics + device pci 02.0 on + subsystemid 0x17aa 0x21fa + end # vga controller + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "alt_gp_smi_en" = "0x0000" + register "gpi1_routing" = "2" + register "gpi8_routing" = "2" + + # Enable SATA ports 0 (HDD bay) & 1 (dock) & 2 (msata) + register "sata_port_map" = "0x7" + # Set max SATA speed to 6.0 Gb/s + register "sata_interface_speed_support" = "0x3" + + register "gen1_dec" = "0x7c1601" + register "gen2_dec" = "0x0c15e1" + register "gen4_dec" = "0x0c06a1" + + # Enable zero-based linear PCIe root port functions + register "pcie_port_coalesce" = "1" + + device pci 14.0 on + subsystemid 0x17aa 0x21fa + end # USB 3.0 Controller + device pci 16.0 on + subsystemid 0x17aa 0x21fa + end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on + subsystemid 0x17aa 0x21f3 + end # Intel Gigabit Ethernet + device pci 1a.0 on + subsystemid 0x17aa 0x21fa + end # USB2 EHCI #2 + device pci 1b.0 on + subsystemid 0x17aa 0x21fa + end # High Definition Audio + device pci 1c.0 on + subsystemid 0x17aa 0x21fa + device pci 00.0 on + subsystemid 0x17aa 0x21fa + end + device pci 00.1 on + subsystemid 0x17aa 0x21fa + end + end # PCIe Port #1 + device pci 1c.1 on + subsystemid 0x17aa 0x21fa + end # PCIe Port #2 + device pci 1c.2 on + subsystemid 0x17aa 0x21fa + end # PCIe Port #3 (expresscard) + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on + subsystemid 0x17aa 0x21fa + end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on #LPC bridge + subsystemid 0x17aa 0x21fa + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x09" + register "config2" = "0xa0" + register "config3" = "0xe0" + + register "has_keyboard_backlight" = "1" + + register "beepmask0" = "0x00" + register "beepmask1" = "0x86" + register "has_power_management_beeps" = "0" + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xd0" + register "event5_enable" = "0xfc" + register "event6_enable" = "0x00" + register "event7_enable" = "0x01" + register "event8_enable" = "0x7b" + register "event9_enable" = "0xff" + register "eventa_enable" = "0x01" + register "eventb_enable" = "0x00" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "evente_enable" = "0x0d" + end + end # LPC bridge + device pci 1f.2 on + subsystemid 0x17aa 0x21fa + end # SATA Controller 1 + device pci 1f.3 on + subsystemid 0x17aa 0x21fa + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 on + subsystemid 0x17aa 0x21fa + end # Thermal + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_x230/dsdt.asl b/src/mainboard/lenovo/thinkpad_x230/dsdt.asl new file mode 100644 index 0000000..c73f795 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/dsdt.asl @@ -0,0 +1,60 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 17 +#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB +#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 +#define RP03_IS_EXPRESSCARD 1 +#define EC_LENOVO_H8_ME_WORKAROUND 1 +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, // DSDT revision: ACPI v2.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20110725 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + // General Purpose Events + //#include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> +} diff --git a/src/mainboard/lenovo/thinkpad_x230/fadt.c b/src/mainboard/lenovo/thinkpad_x230/fadt.c new file mode 100644 index 0000000..27e6303 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), + 0x40) & 0xfffe; + + memset((void *) fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, "CORE", 4); + header->asl_compiler_revision = 1; + + fadt->firmware_ctrl = (unsigned long) facs; + fadt->dsdt = (unsigned long) dsdt; + fadt->model = 1; + fadt->preferred_pm_profile = PM_MOBILE; + + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 16; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 101; /* c2 not supported */ + fadt->p_lvl3_lat = 87; + fadt->flush_size = 1024; + fadt->flush_stride = 16; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x00; + fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; + + fadt->flags = ACPI_FADT_WBINVD | + ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | + ACPI_FADT_RESET_REGISTER | + ACPI_FADT_SEALED_CASE | + ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_PLATFORM_CLOCK; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = + acpi_checksum((void *) fadt, header->length); +} diff --git a/src/mainboard/lenovo/thinkpad_x230/gpio.c b/src/mainboard/lenovo/thinkpad_x230/gpio.c new file mode 100644 index 0000000..cacc90f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/gpio.c @@ -0,0 +1,306 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef X230_GPIO_H +#define X230_GPIO_H + +#include "southbridge/intel/bd82x6x/gpio.h" + +const struct pch_gpio_set1 pch_gpio_set1_mode = { + .gpio0 = GPIO_MODE_GPIO, + .gpio1 = GPIO_MODE_GPIO, + .gpio2 = GPIO_MODE_GPIO, + .gpio3 = GPIO_MODE_GPIO, + .gpio4 = GPIO_MODE_GPIO, + .gpio5 = GPIO_MODE_GPIO, + .gpio6 = GPIO_MODE_GPIO, + .gpio7 = GPIO_MODE_GPIO, + .gpio8 = GPIO_MODE_GPIO, + .gpio9 = GPIO_MODE_NATIVE, + .gpio10 = GPIO_MODE_GPIO, + .gpio11 = GPIO_MODE_NATIVE, + .gpio12 = GPIO_MODE_NATIVE, + .gpio13 = GPIO_MODE_GPIO, + .gpio14 = GPIO_MODE_NATIVE, + .gpio15 = GPIO_MODE_GPIO, + .gpio16 = GPIO_MODE_NATIVE, + .gpio17 = GPIO_MODE_GPIO, + .gpio18 = GPIO_MODE_NATIVE, + .gpio19 = GPIO_MODE_NATIVE, + .gpio20 = GPIO_MODE_NATIVE, + .gpio21 = GPIO_MODE_GPIO, + .gpio22 = GPIO_MODE_GPIO, + .gpio23 = GPIO_MODE_NATIVE, + .gpio24 = GPIO_MODE_GPIO, + .gpio25 = GPIO_MODE_NATIVE, + .gpio26 = GPIO_MODE_NATIVE, + .gpio27 = GPIO_MODE_GPIO, + .gpio28 = GPIO_MODE_GPIO, + .gpio29 = GPIO_MODE_GPIO, + .gpio30 = GPIO_MODE_NATIVE, + .gpio31 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set1 pch_gpio_set1_direction = { + .gpio0 = GPIO_DIR_INPUT, + .gpio1 = GPIO_DIR_INPUT, + .gpio2 = GPIO_DIR_INPUT, + .gpio3 = GPIO_DIR_INPUT, + .gpio4 = GPIO_DIR_INPUT, + .gpio5 = GPIO_DIR_INPUT, + .gpio6 = GPIO_DIR_INPUT, + .gpio7 = GPIO_DIR_INPUT, + .gpio8 = GPIO_DIR_OUTPUT, + .gpio9 = GPIO_DIR_INPUT, + .gpio10 = GPIO_DIR_OUTPUT, + .gpio11 = GPIO_DIR_INPUT, + .gpio12 = GPIO_DIR_OUTPUT, + .gpio13 = GPIO_DIR_INPUT, + .gpio14 = GPIO_DIR_INPUT, + .gpio15 = GPIO_DIR_OUTPUT, + .gpio16 = GPIO_DIR_INPUT, + .gpio17 = GPIO_DIR_INPUT, + .gpio18 = GPIO_DIR_INPUT, + .gpio19 = GPIO_DIR_INPUT, + .gpio20 = GPIO_DIR_INPUT, + .gpio21 = GPIO_DIR_INPUT, + .gpio22 = GPIO_DIR_OUTPUT, + .gpio23 = GPIO_DIR_INPUT, + .gpio24 = GPIO_DIR_OUTPUT, + .gpio25 = GPIO_DIR_INPUT, + .gpio26 = GPIO_DIR_INPUT, + .gpio27 = GPIO_DIR_INPUT, + .gpio28 = GPIO_DIR_OUTPUT, + .gpio29 = GPIO_DIR_OUTPUT, + .gpio30 = GPIO_DIR_OUTPUT, + .gpio31 = GPIO_DIR_INPUT +}; + +const struct pch_gpio_set1 pch_gpio_set1_level = { + .gpio0 = GPIO_LEVEL_HIGH, + .gpio1 = GPIO_LEVEL_HIGH, + .gpio2 = GPIO_LEVEL_LOW, + .gpio3 = GPIO_LEVEL_HIGH, + .gpio4 = GPIO_LEVEL_HIGH, + .gpio5 = GPIO_LEVEL_HIGH, + .gpio6 = GPIO_LEVEL_HIGH, + .gpio7 = GPIO_LEVEL_HIGH, + .gpio8 = GPIO_LEVEL_LOW, + .gpio9 = GPIO_LEVEL_HIGH, + .gpio10 = GPIO_LEVEL_HIGH, + .gpio11 = GPIO_LEVEL_HIGH, + .gpio12 = GPIO_LEVEL_HIGH, + .gpio13 = GPIO_LEVEL_HIGH, + .gpio14 = GPIO_LEVEL_HIGH, + .gpio15 = GPIO_LEVEL_LOW, + .gpio16 = GPIO_LEVEL_HIGH, + .gpio17 = GPIO_LEVEL_HIGH, + .gpio18 = GPIO_LEVEL_HIGH, + .gpio19 = GPIO_LEVEL_HIGH, + .gpio20 = GPIO_LEVEL_HIGH, + .gpio21 = GPIO_LEVEL_HIGH, + .gpio22 = GPIO_LEVEL_HIGH, + .gpio23 = GPIO_LEVEL_HIGH, + .gpio24 = GPIO_LEVEL_LOW, + .gpio25 = GPIO_LEVEL_HIGH, + .gpio26 = GPIO_LEVEL_HIGH, + .gpio27 = GPIO_LEVEL_LOW, + .gpio28 = GPIO_LEVEL_LOW, + .gpio29 = GPIO_LEVEL_HIGH, + .gpio30 = GPIO_LEVEL_HIGH, + .gpio31 = GPIO_LEVEL_LOW, +}; + +const struct pch_gpio_set1 pch_gpio_set1_invert = { + .gpio1 = GPIO_INVERT, + .gpio6 = GPIO_INVERT, + .gpio13 = GPIO_INVERT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_mode = { + .gpio32 = GPIO_MODE_NATIVE, + .gpio33 = GPIO_MODE_GPIO, + .gpio34 = GPIO_MODE_GPIO, + .gpio35 = GPIO_MODE_GPIO, + .gpio36 = GPIO_MODE_GPIO, + .gpio37 = GPIO_MODE_GPIO, + .gpio38 = GPIO_MODE_GPIO, + .gpio39 = GPIO_MODE_GPIO, + .gpio40 = GPIO_MODE_NATIVE, + .gpio41 = GPIO_MODE_NATIVE, + .gpio42 = GPIO_MODE_NATIVE, + .gpio43 = GPIO_MODE_GPIO, + .gpio44 = GPIO_MODE_NATIVE, + .gpio45 = GPIO_MODE_NATIVE, + .gpio46 = GPIO_MODE_NATIVE, + .gpio47 = GPIO_MODE_NATIVE, + .gpio48 = GPIO_MODE_GPIO, + .gpio49 = GPIO_MODE_GPIO, + .gpio50 = GPIO_MODE_GPIO, + .gpio51 = GPIO_MODE_GPIO, + .gpio52 = GPIO_MODE_GPIO, + .gpio53 = GPIO_MODE_GPIO, + .gpio54 = GPIO_MODE_GPIO, + .gpio55 = GPIO_MODE_GPIO, + .gpio56 = GPIO_MODE_NATIVE, + .gpio57 = GPIO_MODE_GPIO, + .gpio58 = GPIO_MODE_NATIVE, + .gpio59 = GPIO_MODE_NATIVE, + .gpio60 = GPIO_MODE_NATIVE, + .gpio61 = GPIO_MODE_NATIVE, + .gpio62 = GPIO_MODE_NATIVE, + .gpio63 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set2 pch_gpio_set2_direction = { + .gpio32 = GPIO_DIR_INPUT, + .gpio33 = GPIO_DIR_INPUT, + .gpio34 = GPIO_DIR_OUTPUT, + .gpio35 = GPIO_DIR_INPUT, + .gpio36 = GPIO_DIR_INPUT, + .gpio37 = GPIO_DIR_INPUT, + .gpio38 = GPIO_DIR_INPUT, + .gpio39 = GPIO_DIR_INPUT, + .gpio40 = GPIO_DIR_INPUT, + .gpio41 = GPIO_DIR_INPUT, + .gpio42 = GPIO_DIR_INPUT, + .gpio43 = GPIO_DIR_OUTPUT, + .gpio44 = GPIO_DIR_INPUT, + .gpio45 = GPIO_DIR_INPUT, + .gpio46 = GPIO_DIR_INPUT, + .gpio47 = GPIO_DIR_INPUT, + .gpio48 = GPIO_DIR_INPUT, + .gpio49 = GPIO_DIR_INPUT, + .gpio50 = GPIO_DIR_INPUT, + .gpio51 = GPIO_DIR_OUTPUT, + .gpio52 = GPIO_DIR_OUTPUT, + .gpio53 = GPIO_DIR_OUTPUT, + .gpio54 = GPIO_DIR_INPUT, + .gpio55 = GPIO_DIR_OUTPUT, + .gpio56 = GPIO_DIR_INPUT, + .gpio57 = GPIO_DIR_INPUT, + .gpio58 = GPIO_DIR_INPUT, + .gpio59 = GPIO_DIR_INPUT, + .gpio60 = GPIO_DIR_INPUT, + .gpio61 = GPIO_DIR_OUTPUT, + .gpio62 = GPIO_DIR_OUTPUT, + .gpio63 = GPIO_DIR_OUTPUT, +}; + +const struct pch_gpio_set2 pch_gpio_set2_level = { + .gpio32 = GPIO_LEVEL_HIGH, + .gpio33 = GPIO_LEVEL_HIGH, + .gpio34 = GPIO_LEVEL_LOW, + .gpio35 = GPIO_LEVEL_LOW, + .gpio36 = GPIO_LEVEL_LOW, + .gpio37 = GPIO_LEVEL_LOW, + .gpio38 = GPIO_LEVEL_HIGH, + .gpio39 = GPIO_LEVEL_LOW, + .gpio40 = GPIO_LEVEL_HIGH, + .gpio41 = GPIO_LEVEL_HIGH, + .gpio42 = GPIO_LEVEL_HIGH, + .gpio43 = GPIO_LEVEL_HIGH, + .gpio44 = GPIO_LEVEL_HIGH, + .gpio45 = GPIO_LEVEL_HIGH, + .gpio46 = GPIO_LEVEL_HIGH, + .gpio47 = GPIO_LEVEL_HIGH, + .gpio48 = GPIO_LEVEL_HIGH, + .gpio49 = GPIO_LEVEL_HIGH, + .gpio50 = GPIO_LEVEL_HIGH, + .gpio51 = GPIO_LEVEL_HIGH, + .gpio52 = GPIO_LEVEL_HIGH, + .gpio53 = GPIO_LEVEL_HIGH, + .gpio54 = GPIO_LEVEL_HIGH, + .gpio55 = GPIO_LEVEL_HIGH, + .gpio56 = GPIO_LEVEL_HIGH, + .gpio57 = GPIO_LEVEL_HIGH, + .gpio58 = GPIO_LEVEL_HIGH, + .gpio59 = GPIO_LEVEL_HIGH, + .gpio60 = GPIO_LEVEL_HIGH, + .gpio61 = GPIO_LEVEL_HIGH, + .gpio62 = GPIO_LEVEL_LOW, + .gpio63 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_set3 pch_gpio_set3_mode = { + .gpio64 = GPIO_MODE_GPIO, + .gpio65 = GPIO_MODE_GPIO, + .gpio66 = GPIO_MODE_GPIO, + .gpio67 = GPIO_MODE_GPIO, + .gpio68 = GPIO_MODE_GPIO, + .gpio69 = GPIO_MODE_GPIO, + .gpio70 = GPIO_MODE_GPIO, + .gpio71 = GPIO_MODE_GPIO, + .gpio72 = GPIO_MODE_NATIVE, + .gpio73 = GPIO_MODE_NATIVE, + .gpio74 = GPIO_MODE_NATIVE, + .gpio75 = GPIO_MODE_NATIVE, +}; + +const struct pch_gpio_set3 pch_gpio_set3_direction = { + .gpio64 = GPIO_DIR_INPUT, + .gpio65 = GPIO_DIR_INPUT, + .gpio66 = GPIO_DIR_INPUT, + .gpio67 = GPIO_DIR_INPUT, + .gpio68 = GPIO_DIR_INPUT, + .gpio69 = GPIO_DIR_INPUT, + .gpio70 = GPIO_DIR_INPUT, + .gpio71 = GPIO_DIR_INPUT, + .gpio72 = GPIO_DIR_INPUT, + .gpio73 = GPIO_DIR_INPUT, + .gpio74 = GPIO_DIR_INPUT, + .gpio75 = GPIO_DIR_INPUT, +}; + +const struct pch_gpio_set3 pch_gpio_set3_level = { + .gpio64 = GPIO_LEVEL_HIGH, + .gpio65 = GPIO_LEVEL_HIGH, + .gpio66 = GPIO_LEVEL_HIGH, + .gpio67 = GPIO_LEVEL_HIGH, + .gpio68 = GPIO_LEVEL_LOW, + .gpio69 = GPIO_LEVEL_LOW, + .gpio70 = GPIO_LEVEL_HIGH, + .gpio71 = GPIO_LEVEL_HIGH, + .gpio72 = GPIO_LEVEL_HIGH, + .gpio73 = GPIO_LEVEL_HIGH, + .gpio74 = GPIO_LEVEL_HIGH, + .gpio75 = GPIO_LEVEL_HIGH, +}; + +const struct pch_gpio_map mainboard_gpio_map = { + .set1 = { + .mode = &pch_gpio_set1_mode, + .direction = &pch_gpio_set1_direction, + .level = &pch_gpio_set1_level, + .invert = &pch_gpio_set1_invert, + + }, + .set2 = { + .mode = &pch_gpio_set2_mode, + .direction = &pch_gpio_set2_direction, + .level = &pch_gpio_set2_level, + }, + .set3 = { + .mode = &pch_gpio_set3_mode, + .direction = &pch_gpio_set3_direction, + .level = &pch_gpio_set3_level, + }, +}; +#endif diff --git a/src/mainboard/lenovo/thinkpad_x230/hda_verb.c b/src/mainboard/lenovo/thinkpad_x230/hda_verb.c new file mode 100644 index 0000000..bd176c1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/hda_verb.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Vendor Name : IDT + * Vendor ID : 0x10ec0269 + * Subsystem ID : 0x17aa21fa + * Revision ID : 0x100303 + */ + + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269VC + 0x17aa21fa, // Subsystem ID + 0x00000012, // Number of 4 dword sets + +/* Bits 31:28 - Codec Address */ +/* Bits 27:20 - NID */ +/* Bits 19:8 - Verb ID */ +/* Bits 7:0 - Payload */ + +/* NID 0x01 - NodeInfo */ + AZALIA_SUBVENDOR(0x0, 0x17AA21FA), + +/* NID 0x0A - External Microphone Connector + * Config=0x04A11020 (External,Right; MicIn,3.5mm; Black,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0A, 0x04A11020), + +/* NID 0x0B - Headphone Connector + * Config=0x0421101F (External,Right; HP,3.5mm; Black,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0B, 0x0421101F), + +/* NID 0x0C - Not connected + * Config=0x40F000F0 (N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0C, 0x40F000F0), + +/* NID 0x0D - Internal Speakers + * Config=0x90170110 (Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x0D, 0x90170110), + +/* NID 0x0F - Not connected + * Config=0x40F000F0 + */ + AZALIA_PIN_CFG(0x0, 0x0F, 0x40F000F0), + +/* NID 0x11 - Internal Microphone + * Config=0xD5A30140 (Fixed internal,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq) + */ + AZALIA_PIN_CFG(0x0, 0x11, 0xD5A30140), + AZALIA_PIN_CFG(0x0, 0x12, 0x90A60140), + AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0x0, 0x15, 0x03211020), + AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), + AZALIA_PIN_CFG(0x0, 0x19, 0x411111F0), + + 0x01970804, + 0x01870803, + 0x01470740, + 0x00970600, + + AZALIA_PIN_CFG(0x0, 0x1A, 0x411111F0), + AZALIA_PIN_CFG(0x0, 0x1D, 0x40138205), + AZALIA_PIN_CFG(0x0, 0x1E, 0x411111F0), + + /* Misc entries */ + 0x00370600, + 0x00270600, + 0x00B707C0, /* Enable PortB as Output with HP amp */ + 0x00D70740, /* Enable PortD as Output */ + 0x0017A200, /* Disable ClkEn of PortSenseTst */ + 0x0017C621, /* Slave Port - Port A used as microphone input for + combo Jack + Master Port - Port B used for Jack Presence Detect + Enable Combo Jack Detection */ + 0x0017A208, /* Enable ClkEn of PortSenseTst */ + 0x00170500, /* Set power state to D0 */ + + /* --- Next Codec --- */ + +/* Vendor Name : Intel + * Vendor ID : 0x80862806 + * Subsystem ID : 0x80860101 + * Revision ID : 0x100000 + */ + /* coreboot specific header */ + 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI + 0x80860101, // Subsystem ID + 0x00000004, // Number of IDs + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), + + /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), + + /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ + AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) +}; + +const u32 pc_beep_verbs[] = { + 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ +}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_x230/mainboard.c b/src/mainboard/lenovo/thinkpad_x230/mainboard.c new file mode 100644 index 0000000..a060015 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/mainboard.c @@ -0,0 +1,89 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011-2012 Google Inc. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <string.h> +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> +#include <drivers/intel/gma/int15.h> +#include <arch/acpi.h> +#include <boot/coreboot_tables.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <smbios.h> +#include <device/pci.h> +#include <pc80/keyboard.h> +#include <ec/lenovo/h8/h8.h> +#include <build.h> + +void mainboard_suspend_resume(void) +{ + /* Call SMM finalize() handlers before resume */ + outb(0xcb, 0xb2); +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + +static void mainboard_init(device_t dev) +{ + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x38c0) = 0x00000007; + + /* This sneaked in here, because X201 SuperIO chip isn't really + connected to anything and hence we don't init it. + */ + pc_keyboard_init(); + + /* Enable expresscard hotplug events. */ + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), + 0xd8, + pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), 0xd8) + | (1 << 30)); + pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), + 0x42, 0x142); +} + +// mainboard_enable is executed as first thing after +// enumerate_buses(). + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +void h8_mainboard_init_dock (void) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_x230/romstage.c b/src/mainboard/lenovo/thinkpad_x230/romstage.c new file mode 100644 index 0000000..2c39741 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/romstage.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <lib.h> +#include <timestamp.h> +#include <arch/byteorder.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <console/console.h> +#include "northbridge/intel/sandybridge/sandybridge.h" +#include "northbridge/intel/sandybridge/raminit_native.h" +#include "southbridge/intel/bd82x6x/pch.h" +#include "southbridge/intel/bd82x6x/gpio.h" +#include <arch/cpu.h> +#include <cpu/x86/msr.h> +#include <cbfs.h> + +void pch_enable_lpc(void) +{ + /* X230 EC Decode Range Port60/64, Port62/66 */ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); + pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); + pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xac, + 0x80010000); +} + +void rcba_config(void) +{ + /* + * GFX INTA -> PIRQA (MSI) + * D28IP_P1IP WLAN INTA -> PIRQB + * D28IP_P2IP ETH0 INTB -> PIRQF + * D28IP_P3IP SDCARD INTC -> PIRQD + * D29IP_E1P EHCI1 INTA -> PIRQD + * D26IP_E2P EHCI2 INTA -> PIRQF + * D31IP_SIP SATA INTA -> PIRQB (MSI) + * D31IP_SMIP SMBUS INTB -> PIRQH + * D31IP_TTIP THRT INTC -> PIRQA + * D27IP_ZIP HDA INTA -> PIRQA (MSI) + * + * Trackpad interrupt is edge triggered and cannot be shared. + * TRACKPAD -> PIRQG + + */ + + /* Device interrupt pin register (board specific) */ + RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | + (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); + RCBA32(D29IP) = (INTA << D29IP_E1P); + RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | + (INTC << D28IP_P3IP); + RCBA32(D27IP) = (INTA << D27IP_ZIP); + RCBA32(D26IP) = (INTA << D26IP_E2P); + RCBA32(D25IP) = (NOINT << D25IP_LIP); + RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); + + /* Device interrupt route registers */ + DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); + DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); + DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); + DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); + DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); + DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); + DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); + + /* Enable IOAPIC (generic) */ + RCBA16(OIC) = 0x0100; + /* PCH BWG says to read back the IOAPIC enable register */ + (void) RCBA16(OIC); + + /* Disable unused devices (board specific) */ + RCBA32(FD) = 0x17f81fe3; + RCBA32(BUC) = 0; +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, /* P0 (left, fan side), OC 0 */ + { 1, 0, 1 }, /* P1 (left touchpad side), OC 1 */ + { 1, 1, 3 }, /* P2: dock, OC 3 */ + { 1, 1, -1 }, /* P3: wwan, no OC */ + { 1, 1, -1 }, /* P4: Wacom tablet on X230t, otherwise empty */ + { 1, 1, -1 }, /* P5: Expresscard, no OC */ + { 0, 0, -1 }, /* P6: Empty */ + { 1, 2, -1 }, /* P7: dock, no OC */ + { 1, 0, -1 }, + { 1, 2, 5 }, /* P9: Right (EHCI debug), OC 5 */ + { 1, 1, -1 }, /* P10: fingerprint reader, no OC */ + { 1, 1, -1 }, /* P11: bluetooth, no OC. */ + { 1, 1, -1 }, /* P12: wlan, no OC */ + { 1, 1, -1 }, /* P13: webcam, no OC */ +}; + +void mainboard_get_spd(spd_raw_data *spd) { + read_spd (&spd[0], 0x50); + read_spd (&spd[2], 0x51); +} diff --git a/src/mainboard/lenovo/thinkpad_x230/smihandler.c b/src/mainboard/lenovo/thinkpad_x230/smihandler.c new file mode 100644 index 0000000..5bcde1c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/smihandler.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include <southbridge/intel/bd82x6x/nvs.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <southbridge/intel/bd82x6x/me.h> +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_206ax/model_206ax.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, + (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch (event) { + case 0x14: + /* brightness up */ + mainboard_smi_brightness_up(); + break; + case 0x15: + /* brightness down */ + mainboard_smi_brightness_down(); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ + if (gpi_sts & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, + pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_206ax_finalize_smm(); + + mainboard_finalized = 1; + break; + + default: + break; + } + return 0; +} + +void mainboard_smi_sleep(u8 slp_typ) +{ + if (slp_typ == 3) { + u8 ec_wake = ec_read(0x32); + /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ + if (ec_wake & 0x14) { + u32 gpe_rout; + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + + /* Enable EC WAKE GPE. */ + outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); + gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); + /* Redirect EC WAKE GPE to SCI. */ + gpe_rout &= ~(3 << 26); + gpe_rout |= (2 << 26); + pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x230/thermal.h b/src/mainboard/lenovo/thinkpad_x230/thermal.h new file mode 100644 index 0000000..ab24bb1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x230/thermal.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. + * Copyright (C) 2014 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef X230_THERMAL_H +#define X230_THERMAL_H + + /* Temperature which OS will shutdown at */ + #define CRITICAL_TEMPERATURE 100 + + /* Temperature which OS will throttle CPU */ + #define PASSIVE_TEMPERATURE 90 + +#endif diff --git a/src/mainboard/lenovo/thinkpad_x60/Kconfig b/src/mainboard/lenovo/thinkpad_x60/Kconfig new file mode 100644 index 0000000..d6fdac7 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/Kconfig @@ -0,0 +1,63 @@ +if BOARD_LENOVO_X60 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select CPU_INTEL_SOCKET_MFCPGA478 + select NORTHBRIDGE_INTEL_I945 + select NORTHBRIDGE_INTEL_SUBTYPE_I945GM + select SOUTHBRIDGE_INTEL_I82801GX + select SOUTHBRIDGE_RICOH_RL5C476 + select SUPERIO_NSC_PC87382 + select SUPERIO_NSC_PC87392 + select EC_LENOVO_PMH7 + select EC_LENOVO_H8 + select DRIVERS_ICS_954309 + select HAVE_OPTION_TABLE + select INTEL_INT15 + select HAVE_CMOS_DEFAULT + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_2048 + select CHANNEL_XOR_RANDOMIZATION + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select USE_OPTION_TABLE + select MAINBOARD_HAS_NATIVE_VGA_INIT + select H8_DOCK_EARLY_INIT + select DRIVERS_LENOVO_WACOM + select INTEL_EDID + +config MAINBOARD_DIR + string + default lenovo/thinkpad_x60 + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config MAINBOARD_PART_NUMBER + string + default "ThinkPad X60" + +config MMCONF_BASE_ADDRESS + hex + default 0xf0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config MAX_CPUS + int + default 2 + +config SEABIOS_PS2_TIMEOUT + int + default 3000 + +endif diff --git a/src/mainboard/lenovo/thinkpad_x60/Makefile.inc b/src/mainboard/lenovo/thinkpad_x60/Makefile.inc new file mode 100644 index 0000000..0b01fe4 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c +romstage-y += dock.c +ramstage-y += dock.c diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/dock.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/dock.asl new file mode 100644 index 0000000..136f888 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/dock.asl @@ -0,0 +1,77 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Scope (_SB) +{ + OperationRegion (DLPC, SystemIO, 0x164c, 1) + Field(DLPC, ByteAcc, NoLock, Preserve) + { + , 3, + DSTA, 1, + } + + Device(DOCK) + { + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_DCK, 1, NotSerialized) + { + if (Arg0) { + /* connect dock */ + TRAP(SMI_DOCK_CONNECT) + } else { + /* disconnect dock */ + TRAP(SMI_DOCK_DISCONNECT) + } + + Xor(Arg0, DSTA, Local0) + Return (Local0) + } + + Method(_STA, 0, NotSerialized) + { + Return (DSTA) + } + } +} + +Scope(_SB.PCI0.LPCB.EC) +{ + Method(_Q18, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q50, 0, NotSerialized) + { + Notify(_SB.DOCK, 3) + } + + Method(_Q58, 0, NotSerialized) + { + Notify(_SB.DOCK, 0) + } + +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/ec.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/ec.asl new file mode 100644 index 0000000..a92bc4a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/ec.asl @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/gpe.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/gpe.asl new file mode 100644 index 0000000..b160b50 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/gpe.asl @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" +Scope (_GPE) +{ + Method(_L18, 0, NotSerialized) + { + /* Read EC register to clear wake status */ + Store(_SB.PCI0.LPCB.EC.WAKE, Local0) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/i945_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/i945_pci_irqs.asl new file mode 100644 index 0000000..e834ae1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/i945_pci_irqs.asl @@ -0,0 +1,63 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * i945 + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x10 } // SATA + }) + } Else { + Return (Package() { + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 } // SATA + }) + } +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/ich7_pci_irqs.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/ich7_pci_irqs.asl new file mode 100644 index 0000000..548996c --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/ich7_pci_irqs.asl @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing for the + * 0:1e.0 PCI bridge of the ICH7 + */ + +If (PICM) { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x16 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } + }) + } Else { + Return (Package() { + Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKB, 0x00 }, + Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKC, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, + Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } + }) +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/mainboard.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/mainboard.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/platform.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/platform.asl new file mode 100644 index 0000000..ddb8ff3 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/platform.asl @@ -0,0 +1,205 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, // APM command + APMS, 8 // APM status +} + +/* Port 80 POST */ + +OperationRegion (POST, SystemIO, 0x80, 1) +Field (POST, ByteAcc, Lock, Preserve) +{ + DBG0, 8 +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) // SMI Function + Store (0, TRP0) // Generate trap + Return (SMIF) // Return value of SMI handler +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + // Remember the OS' IRQ routing choice. + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ + _SB.PCI0.LPCB.EC.MUTE(1) + _SB.PCI0.LPCB.EC.USBP(0) +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + // CPU specific part + + // Notify PCI Express slots in case a card + // was inserted while a sleep state was active. + + // Are we going to S3? + If (LEqual(Arg0, 3)) { + // .. + } + + // Are we going to S4? + If (LEqual(Arg0, 4)) { + // .. + } + + // TODO: Windows XP SP2 P-State restore + + Return(Package(){0,0}) +} + +// Power notification + +External (_PR_.CPU0, DeviceObj) +External (_PR_.CPU1, DeviceObj) + +Method (PNOT) +{ + If (MPEN) { + If(And(PDC0, 0x08)) { + Notify (_PR_.CPU0, 0x80) // _PPC + + If (And(PDC0, 0x10)) { + Sleep(100) + Notify(_PR_.CPU0, 0x81) // _CST + } + } + + If(And(PDC1, 0x08)) { + Notify (_PR_.CPU1, 0x80) // _PPC + If (And(PDC1, 0x10)) { + Sleep(100) + Notify(_PR_.CPU1, 0x81) // _CST + } + } + + } Else { // UP + Notify (_PR_.CPU0, 0x80) + Sleep(0x64) + Notify(_PR_.CPU0, 0x81) + } + + // Notify the Batteries + Notify(_SB.PCI0.LPCB.EC.BAT0, 0x80) // Execute BAT1 _BST + Notify(_SB.PCI0.LPCB.EC.BAT1, 0x80) // Execute BAT2 _BST +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + // TRAP(71) // TODO + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + /* Linux answers _OSI with "True" for a couple of + * Windows version queries. But unlike Windows it + * needs a Video repost, so let's determine whether + * we're running Linux. + */ + + If (_OSI("Linux")) { + Store (1, LINX) + } + + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + } + + /* And the OS workarounds start right after we know what we're + * running: Windows XP SP1 needs to have C-State coordination + * enabled in SMM. + */ + If (LAnd(LEqual(OSYS, 2001), MPEN)) { + // TRAP(61) // TODO + } + + /* SMM power state and C4-on-C3 settings need to be updated */ + // TRAP(43) // TODO + } +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/superio.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/superio.asl new file mode 100644 index 0000000..e69de29 diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi/video.asl b/src/mainboard/lenovo/thinkpad_x60/acpi/video.asl new file mode 100644 index 0000000..b38d82b --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi/video.asl @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "smi.h" + +Device (DSPC) +{ + Name (_ADR, 0x00020001) + OperationRegion (DSPC, PCI_Config, 0x00, 0x100) + Field (DSPC, ByteAcc, NoLock, Preserve) + { + Offset (0xf4), + BRTC, 8 + } + + Method(BRTD, 0, NotSerialized) + { + Store(BRTC, Local0) + if (LGreater (Local0, 15)) + { + Subtract(Local0, 16, Local0) + Store(Local0, BRTC) + Trap(SMI_SAVE_CMOS) + } + } + + Method(BRTU, 0, NotSerialized) + { + Store (BRTC, Local0) + if (LLess(Local0, 0xff)) + { + Add (Local0, 16, Local0) + Store(Local0, BRTC) + Trap(SMI_SAVE_CMOS) + } + } +} diff --git a/src/mainboard/lenovo/thinkpad_x60/acpi_tables.c b/src/mainboard/lenovo/thinkpad_x60/acpi_tables.c new file mode 100644 index 0000000..ada7d08 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/acpi_tables.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +#include "southbridge/intel/i82801gx/nvs.h" +void acpi_create_gnvs(global_nvs_t *gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + + /* Enable both COM ports */ + gnvs->cmap = 0x01; + gnvs->cmbp = 0x01; + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 2, IO_APIC_ADDR, 0); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); + + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/lenovo/thinkpad_x60/board_info.txt b/src/mainboard/lenovo/thinkpad_x60/board_info.txt new file mode 100644 index 0000000..5d4b926 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/board_info.txt @@ -0,0 +1,6 @@ +Board name: X60/X60s +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/lenovo/thinkpad_x60/cmos.default b/src/mainboard/lenovo/thinkpad_x60/cmos.default new file mode 100644 index 0000000..0185e94 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/cmos.default @@ -0,0 +1,21 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +hyper_threading=Enable +nmi=Enable +boot_devices='' +boot_default=0x40 +cmos_defaults_loaded=Yes +lpt=Enable +volume=0x3 +tft_brightness=0xff +first_battery=Primary +bluetooth=Enable +wlan=Enable +wwan=Enable +trackpoint=Enable +fn_ctrl_swap=Disable +sticky_fn=Disable +power_management_beeps=Enable +low_battery_beep=Enable diff --git a/src/mainboard/lenovo/thinkpad_x60/cmos.layout b/src/mainboard/lenovo/thinkpad_x60/cmos.layout new file mode 100644 index 0000000..a74d793 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/cmos.layout @@ -0,0 +1,160 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 h 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +#409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default +936 1 e 8 cmos_defaults_loaded +937 1 e 1 lpt +#938 46 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ram initialization internal data +1024 8 r 0 C0WL0REOST +1032 8 r 0 C1WL0REOST +1040 8 r 0 RCVENMT +1048 4 r 0 C0DRT1 +1052 4 r 0 C1DRT1 + +1064 8 h 0 volume +1072 8 h 0 tft_brightness +1080 1 e 9 first_battery +1081 1 e 1 bluetooth +1082 1 e 1 wwan +1083 1 e 1 wlan +1084 1 e 1 trackpoint +1085 1 e 1 fn_ctrl_swap +1086 1 e 1 sticky_fn +1087 1 e 1 power_management_beeps +1088 1 e 1 low_battery_beep +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 No +8 1 Yes +9 0 Secondary +9 1 Primary + +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/lenovo/thinkpad_x60/devicetree.cb b/src/mainboard/lenovo/thinkpad_x60/devicetree.cb new file mode 100644 index 0000000..fcf7c29 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/devicetree.cb @@ -0,0 +1,217 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/i945 + + register "gpu_hotplug" = "0x00000220" + register "gpu_lvds_use_spread_spectrum_clock" = "1" + register "gpu_lvds_is_dual_channel" = "0" + register "gpu_backlight" = "0x1280128" + + device cpu_cluster 0 on + chip cpu/intel/socket_mFCPGA478 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x17aa 0x2017 + end + device pci 02.0 on # VGA controller + subsystemid 0x17aa 0x201a + end + device pci 02.1 on # display controller + subsystemid 0x17aa 0x201a + end + chip southbridge/intel/i82801gx + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi13_routing" = "2" + register "gpi12_routing" = "1" + register "gpi8_routing" = "2" + + register "sata_ahci" = "0x1" + register "sata_ports_implemented" = "0x01" + + register "gpe0_en" = "0x11000006" + register "alt_gp_smi_en" = "0x1000" + + register "c4onc3_enable" = "1" + device pci 1b.0 on # Audio Controller + subsystemid 0x17aa 0x2010 + end + device pci 1c.0 on end # Ethernet + device pci 1c.1 on end # Atheros WLAN + device pci 1d.0 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.1 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.2 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.3 on # USB UHCI + subsystemid 0x17aa 0x200a + end + device pci 1d.7 on # USB2 EHCI + subsystemid 0x17aa 0x200b + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x17aa 0x2009 + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x05" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + register "has_power_management_beeps" = "1" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3c" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "eventc_enable" = "0x3c" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + end + chip superio/nsc/pc87382 + device pnp 164e.2 on # IR + io 0x60 = 0x2f8 + end + + device pnp 164e.3 on # Digitizer + io 0x60 = 0x200 + irq 0x29 = 0xb0 + irq 0x70 = 0x5 + irq 0xf0 = 0x82 + end + + device pnp 164e.7 on # GPIO + io 0x60 = 0x1680 + end + + device pnp 164e.19 on # DLPC + io 0x60 = 0x164c + end + end + + chip superio/nsc/pc87392 + device pnp 2e.0 off #FDC + end + + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x3bc + irq 0x70 = 7 + end + + device pnp 2e.2 off # Serial Port / IR + io 0x60 = 0x2f8 + irq 0x70 = 4 + end + + device pnp 2e.3 on # Serial Port + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.7 on # GPIO + io 0x60 = 0x1620 + end + + device pnp 2e.a off # WDT + end + end + end + device pci 1f.1 on # IDE + subsystemid 0x17aa 0x200c + end + device pci 1f.2 on # SATA + subsystemid 0x17aa 0x200d + end + device pci 1f.3 on # SMBUS + subsystemid 0x17aa 0x200f + chip drivers/ics/954309 + register "reg0" = "0x2e" + register "reg1" = "0xf7" + register "reg2" = "0x3c" + register "reg3" = "0x20" + register "reg4" = "0x01" + register "reg5" = "0x00" + register "reg6" = "0x1b" + register "reg7" = "0x01" + register "reg8" = "0x54" + register "reg9" = "0xff" + register "reg10" = "0xff" + register "reg11" = "0x07" + device i2c 69 on end + end + # eeprom, 8 virtual devices, same chip + chip drivers/i2c/at24rf08c + device i2c 54 on end + device i2c 55 on end + device i2c 56 on end + device i2c 57 on end + device i2c 5c on end + device i2c 5d on end + device i2c 5e on end + device i2c 5f on end + end + end + end + chip southbridge/ricoh/rl5c476 + end + end +end diff --git a/src/mainboard/lenovo/thinkpad_x60/dock.c b/src/mainboard/lenovo/thinkpad_x60/dock.c new file mode 100644 index 0000000..1f85281 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/dock.c @@ -0,0 +1,269 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <arch/io.h> +#include "dock.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include "superio/nsc/pc87392/pc87392.h" + +static void dlpc_write_register(int reg, int value) +{ + outb(reg, 0x164e); + outb(value, 0x164f); +} + +static u8 dlpc_read_register(int reg) +{ + outb(reg, 0x164e); + return inb(0x164f); +} + +static void dock_write_register(int reg, int value) +{ + outb(reg, 0x2e); + outb(value, 0x2f); +} + +static u8 dock_read_register(int reg) +{ + outb(reg, 0x2e); + return inb(0x2f); +} + +static void dlpc_gpio_set_mode(int port, int mode) +{ + dlpc_write_register(0xf0, port); + dlpc_write_register(0xf1, mode); +} + +static void dock_gpio_set_mode(int port, int mode, int irq) +{ + dock_write_register(0xf0, port); + dock_write_register(0xf1, mode); + dock_write_register(0xf2, irq); +} + +static void dlpc_gpio_init(void) +{ + /* Select GPIO module */ + dlpc_write_register(0x07, 0x07); + /* GPIO Base Address 0x1680 */ + dlpc_write_register(0x60, 0x16); + dlpc_write_register(0x61, 0x80); + + /* Activate GPIO */ + dlpc_write_register(0x30, 0x01); + + dlpc_gpio_set_mode(0x00, 3); + dlpc_gpio_set_mode(0x01, 3); + dlpc_gpio_set_mode(0x02, 0); + dlpc_gpio_set_mode(0x03, 3); + dlpc_gpio_set_mode(0x04, 4); + dlpc_gpio_set_mode(0x20, 4); + dlpc_gpio_set_mode(0x21, 4); + dlpc_gpio_set_mode(0x23, 4); +} + +int dlpc_init(void) +{ + int timeout = 1000; + + /* Enable 14.318MHz CLK on CLKIN */ + dlpc_write_register(0x29, 0xa0); + while(!(dlpc_read_register(0x29) & 0x10) && timeout--) + udelay(1000); + + if (!timeout) + return 1; + + /* Select DLPC module */ + dlpc_write_register(0x07, 0x19); + /* DLPC Base Address 0x164c */ + dlpc_write_register(0x60, 0x16); + dlpc_write_register(0x61, 0x4c); + /* Activate DLPC */ + dlpc_write_register(0x30, 0x01); + + dlpc_gpio_init(); + + return 0; +} + +int dock_connect(void) +{ + int timeout = 1000; + + outb(0x07, 0x164c); + + timeout = 1000; + + while(!(inb(0x164c) & 8) && timeout--) + udelay(1000); + + if (!timeout) { + /* docking failed, disable DLPC switch */ + outb(0x00, 0x164c); + dlpc_write_register(0x30, 0x00); + return 1; + } + + /* Assert D_PLTRST# */ + outb(0xfe, 0x1680); + udelay(100000); + /* Deassert D_PLTRST# */ + outb(0xff, 0x1680); + + udelay(100000); + + /* startup 14.318MHz Clock */ + dock_write_register(0x29, 0x06); + /* wait until clock is settled */ + timeout = 1000; + while(!(dock_read_register(0x29) & 0x08) && timeout--) + udelay(1000); + + if (!timeout) + return 1; + + /* Pin 6: CLKRUN + * Pin 72: #DR1 + * Pin 19: #SMI + * Pin 73: #MTR + */ + dock_write_register(0x24, 0x37); + + /* PNF active HIGH */ + dock_write_register(0x25, 0xa0); + + /* disable FDC */ + dock_write_register(0x26, 0x01); + + /* Enable GPIO IRQ to #SMI */ + dock_write_register(0x28, 0x02); + + /* select GPIO */ + dock_write_register(0x07, 0x07); + + /* set base address */ + dock_write_register(0x60, 0x16); + dock_write_register(0x61, 0x20); + + /* init GPIO pins */ + dock_gpio_set_mode(0x00, PC87392_GPIO_PIN_DEBOUNCE | + PC87392_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x01, PC87392_GPIO_PIN_DEBOUNCE | + PC87392_GPIO_PIN_PULLUP, + PC87392_GPIO_PIN_TRIGGERS_SMI); + + dock_gpio_set_mode(0x02, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x03, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x04, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x05, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x06, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x07, PC87392_GPIO_PIN_PULLUP, 0x02); + + dock_gpio_set_mode(0x10, PC87392_GPIO_PIN_DEBOUNCE | + PC87392_GPIO_PIN_PULLUP, + PC87392_GPIO_PIN_TRIGGERS_SMI); + + dock_gpio_set_mode(0x11, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x12, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x13, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x14, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x15, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x16, PC87392_GPIO_PIN_PULLUP | + PC87392_GPIO_PIN_OE , 0x00); + + dock_gpio_set_mode(0x17, PC87392_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x20, PC87392_GPIO_PIN_TYPE_PUSH_PULL | + PC87392_GPIO_PIN_OE, 0x00); + + dock_gpio_set_mode(0x21, PC87392_GPIO_PIN_TYPE_PUSH_PULL | + PC87392_GPIO_PIN_OE, 0x00); + + dock_gpio_set_mode(0x22, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x23, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x24, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x25, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x26, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x27, PC87392_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x30, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x31, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x32, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x33, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x34, PC87392_GPIO_PIN_PULLUP, 0x00); + + dock_gpio_set_mode(0x35, PC87392_GPIO_PIN_PULLUP | + PC87392_GPIO_PIN_OE, 0x00); + + dock_gpio_set_mode(0x36, PC87392_GPIO_PIN_PULLUP, 0x00); + dock_gpio_set_mode(0x37, PC87392_GPIO_PIN_PULLUP, 0x00); + + /* enable GPIO */ + dock_write_register(0x30, 0x01); + + outb(0x00, 0x1628); + outb(0x00, 0x1623); + outb(0x82, 0x1622); + outb(0xff, 0x1624); + + /* Enable USB and Ultrabay power */ + outb(0x03, 0x1628); + + dock_write_register(0x07, 0x03); + dock_write_register(0x30, 0x01); + return 0; +} + +void dock_disconnect(void) +{ + printk(BIOS_DEBUG, "%s enter\n", __func__); + /* disconnect LPC bus */ + outb(0x00, 0x164c); + udelay(10000); + + /* Assert PLTRST and DLPCPD */ + outb(0xfc, 0x1680); + udelay(10000); + + /* disable Ultrabay and USB Power */ + outb(0x00, 0x1628); + udelay(10000); + + printk(BIOS_DEBUG, "%s finish\n", __func__); +} + +int dock_present(void) +{ + return !((inb(DEFAULT_GPIOBASE + 0x0c) >> 13) & 1); +} + +int dock_ultrabay_device_present(void) +{ + return inb(0x1621) & 0x02 ? 0 : 1; +} diff --git a/src/mainboard/lenovo/thinkpad_x60/dock.h b/src/mainboard/lenovo/thinkpad_x60/dock.h new file mode 100644 index 0000000..141ae48 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/dock.h @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef THINKPAD_X60_DOCK_H +#define THINKPAD_X60_DOCK_H + +extern int dock_connect(void); +extern void dock_disconnect(void); +extern int dock_present(void); +extern int dlpc_init(void); +extern int dock_ultrabay_device_present(void); +#endif diff --git a/src/mainboard/lenovo/thinkpad_x60/dsdt.asl b/src/mainboard/lenovo/thinkpad_x60/dsdt.asl new file mode 100644 index 0000000..4122917 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/dsdt.asl @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define THINKPAD_EC_GPE 28 +#define BRIGHTNESS_UP \DSPC.BRTU +#define BRIGHTNESS_DOWN \DSPC.BRTD +#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, // DSDT revision: ACPI v3.0 + "COREv4", // OEM id + "COREBOOT", // OEM table id + 0x20090419 // OEM revision +) +{ + // Some generic macros + #include "acpi/platform.asl" + + // global NVS and variables + #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> + + // General Purpose Events + #include "acpi/gpe.asl" + + // mainboard specific devices + #include "acpi/mainboard.asl" + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/i945/acpi/i945.asl> + #include <southbridge/intel/i82801gx/acpi/ich7.asl> + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> + + // Dock support code + #include "acpi/dock.asl" +} diff --git a/src/mainboard/lenovo/thinkpad_x60/fadt.c b/src/mainboard/lenovo/thinkpad_x60/fadt.c new file mode 100644 index 0000000..96767bd --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/fadt.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/acpi.h> + +void mainboard_fill_fadt(acpi_fadt_t * fadt) +{ + fadt->p_lvl3_lat = 0x23; + fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; +} diff --git a/src/mainboard/lenovo/thinkpad_x60/hda_verb.c b/src/mainboard/lenovo/thinkpad_x60/hda_verb.c new file mode 100644 index 0000000..072a306 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/hda_verb.c @@ -0,0 +1,7 @@ +#include <device/azalia_device.h> + +const u32 cim_verb_data[0] = {}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/thinkpad_x60/irq_tables.c b/src/mainboard/lenovo/thinkpad_x60/irq_tables.c new file mode 100644 index 0000000..8991d7f --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/irq_tables.c @@ -0,0 +1,61 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 15, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf5, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ + {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ + {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ + {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ + {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ + {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ + {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ + {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ + {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ + {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ + {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ + {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ + {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lenovo/thinkpad_x60/mainboard.c b/src/mainboard/lenovo/thinkpad_x60/mainboard.c new file mode 100644 index 0000000..1d29c71 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/mainboard.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <ec/lenovo/pmh7/pmh7.h> +#include <ec/acpi/ec.h> +#include <ec/lenovo/h8/h8.h> +#include <northbridge/intel/i945/i945.h> +#include <pc80/mc146818rtc.h> +#include "dock.h" +#include <arch/x86/include/arch/acpigen.h> +#include <smbios.h> +#include <build.h> +#include <drivers/intel/gma/int15.h> +#include "drivers/lenovo/lenovo.h" + +#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT + +static acpi_cstate_t cst_entries[] = { + { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, + { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, + { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, +}; + +int get_cst_entries(acpi_cstate_t **entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} + +static void mainboard_init(device_t dev) +{ + device_t dev0, idedev, sdhci_dev; + + ec_clr_bit(0x03, 2); + + if (inb(0x164c) & 0x08) { + ec_set_bit(0x03, 2); + ec_write(0x0c, 0x88); + } + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); + + /* If we're resuming from suspend, blink suspend LED */ + dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); + if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) + ec_write(0x0c, 0xc7); + + idedev = dev_find_slot(0, PCI_DEVFN(0x1f,1)); + if (idedev && idedev->chip_info && dock_ultrabay_device_present()) { + struct southbridge_intel_i82801gx_config *config = idedev->chip_info; + config->ide_enable_primary = 1; + /* enable Ultrabay power */ + outb(inb(0x1628) | 0x01, 0x1628); + ec_write(0x0c, 0x84); + } else { + /* disable Ultrabay power */ + outb(inb(0x1628) & ~0x01, 0x1628); + ec_write(0x0c, 0x04); + } + + /* Set SDHCI write protect polarity "SDWPPol" */ + sdhci_dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C822, 0); + if (sdhci_dev) { + if (pci_read_config8(sdhci_dev, 0xfa) != 0x20) { + /* unlock */ + pci_write_config8(sdhci_dev, 0xf9, 0xfc); + /* set SDWPPol, keep CLKRUNDis, SDPWRPol clear */ + pci_write_config8(sdhci_dev, 0xfa, 0x20); + /* restore lock */ + pci_write_config8(sdhci_dev, 0xf9, 0x00); + } + } +} + +const char *smbios_mainboard_bios_version(void) +{ + /* Satisfy thinkpad_acpi. */ + if (strlen(CONFIG_LOCALVERSION)) + return "CBET4000 " CONFIG_LOCALVERSION; + else + return "CBET4000 " COREBOOT_VERSION; +} + +static void fill_ssdt(void) +{ + drivers_lenovo_serial_ports_ssdt_generate("\_SB.PCI0.LPCB", 1); +} + +static void mainboard_enable(device_t dev) +{ + dev->ops->init = mainboard_init; + dev->ops->acpi_fill_ssdt_generator = fill_ssdt; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lenovo/thinkpad_x60/mptable.c b/src/mainboard/lenovo/thinkpad_x60/mptable.c new file mode 100644 index 0000000..8ade71b --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/mptable.c @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci.h> +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &isa_bus); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); + + /* Legacy Interrupts */ + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x11); /* HD Audio 0:1b.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x14); /* PCIe 0:1c.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x15); /* PCIe 0:1c.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x16); /* PCIe 0:1c.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x17); /* PCIe 0:1c.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x10); /* USB 0:1d.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x11); /* USB 0:1d.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x13); /* USB 0:1d.3 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x17); /* LPC 0:1f.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x10); /* IDE 0:1f.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x02, 0x02, 0x10); /* SATA 0:1f.2 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x00, 0x02, 0x10); /* Cardbus 5:00.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x01, 0x02, 0x11); /* Firewire 5:00.1 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x02, 0x02, 0x12); /* SDHC 5:00.2 */ + + mptable_lintsrc(mc, isa_bus); + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lenovo/thinkpad_x60/romstage.c b/src/mainboard/lenovo/thinkpad_x60/romstage.c new file mode 100644 index 0000000..943143a --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/romstage.c @@ -0,0 +1,336 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <timestamp.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include "northbridge/intel/i945/i945.h" +#include "northbridge/intel/i945/raminit.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include "dock.h" + +void setup_ich7_gpios(void) +{ + printk(BIOS_DEBUG, " GPIOS..."); + + /* X60 GPIO: + * 1: HDD_PRESENCE# + * 6: Unknown (Pulled high by R215 to VCC3B) + * 7: BDC_PRESENCE# + * 8: H8_WAKE# + * 9: RTC_BAT_IN# + * 10: Unknown (Pulled high by R700 to VCC3M) + * 12: H8SCI# + * 13: SLICE_ON_3M# + * 14: Unknown (Pulled high by R321 to VCC3) + * 15: Unknown (Pulled high by R258 to VCC3) + * 19: Unknown (Pulled low by R594) + * 21: Unknown (Pulled high by R145 to VCC3) + * 22: FWH_WP# + * 25: MDC_KILL# + * 33: HDD_PRESENCE_2# + * 35: CLKREQ_SATA# + * 36: PLANARID0 + * 37: PLANARID1 + * 38: PLANARID2 + * 39: PLANARID3 + * 48: FWH_TBL# + */ + + outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xfbf6ddfd, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + /* Output Control Registers */ + outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + /* Input Control Registers */ + outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000100f2, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x00030043, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ +} + +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); + // decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210); + // decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d); + + /* range 0x1600 - 0x167f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c); + + /* range 0x15e0 - 0x10ef */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); + + /* range 0x1680 - 0x169f */ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681); + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c); +} + +static void early_superio_config(void) +{ + int timeout = 100000; + device_t dev = PNP_DEV(0x2e, 3); + + pnp_write_config(dev, 0x29, 0x06); + + while (!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) + udelay(1000); + + /* Enable COM1 */ + pnp_set_logical_device(dev); + pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); + pnp_set_enable(dev, 1); +} + +static void rcba_config(void) +{ + /* Set up virtual channel 0 */ + RCBA32(0x0014) = 0x80000001; + RCBA32(0x001c) = 0x03128010; + + /* Device 1f interrupt pin register */ + RCBA32(0x3100) = 0x00001230; + RCBA32(0x3108) = 0x40004321; + + /* PCIe Interrupts */ + RCBA32(0x310c) = 0x00004321; + /* HD Audio Interrupt */ + RCBA32(0x3110) = 0x00000002; + + /* dev irq route register */ + RCBA16(0x3140) = 0x1007; + RCBA16(0x3142) = 0x0076; + RCBA16(0x3144) = 0x3210; + RCBA16(0x3146) = 0x7654; + RCBA16(0x3148) = 0x0010; + + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + /* Enable upper 128bytes of CMOS */ + RCBA32(0x3400) = (1 << 2); + + /* Disable unused devices */ + RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; + RCBA32(0x3418) |= (1 << 0); // Required. + + /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ + RCBA32(0x1e84) = 0x00020001; + RCBA32(0x1e80) = 0x0000fe01; + + /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ + RCBA32(0x1e9c) = 0x000200f0; + RCBA32(0x1e98) = 0x000c0801; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030549; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA32(0x3418) |= (1 << 0); + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 reg32; + int boot_mode = 0; + int cbmem_was_initted; + const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 }; + + + timestamp_init(get_initial_timestamp()); + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + /* Force PCIRST# */ + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); + udelay(200 * 1000); + pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); + + ich7_enable_lpc(); + + dlpc_init(); + /* dock_init initializes the DLPC switch on + * thinpad side, so this is required even + * if we're undocked. + */ + if (dock_present()) { + dock_connect(); + early_superio_config(); + } + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, + "Soft reset detected, rebooting properly.\n"); + outb(0x6, 0xcf9); + while (1) + asm("hlt"); + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + boot_mode = 2; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } else { + printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); + } + } + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + + timestamp_add_now(TS_BEFORE_INITRAM); + sdram_initialize(boot_mode, spd_addrmap); + timestamp_add_now(TS_AFTER_INITRAM); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(); + + MCHBAR16(SSKPD) = 0xCAFE; + + cbmem_was_initted = !cbmem_recovery(boot_mode==2); + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if ((boot_mode == 2) && cbmem_was_initted) { + void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, + SKPAD_ACPI_S3_MAGIC); + } +#endif + + timestamp_add_now(TS_END_ROMSTAGE); + +} diff --git a/src/mainboard/lenovo/thinkpad_x60/smi.h b/src/mainboard/lenovo/thinkpad_x60/smi.h new file mode 100644 index 0000000..c5f48a1 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/smi.h @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MAINBOARD_LENOVO_X60_SMI_H +#define MAINBOARD_LENOVO_X60_SMI_H + +#define SMI_DOCK_CONNECT 0x01 +#define SMI_DOCK_DISCONNECT 0x02 +#define SMI_SAVE_CMOS 0x03 + +#endif diff --git a/src/mainboard/lenovo/thinkpad_x60/smihandler.c b/src/mainboard/lenovo/thinkpad_x60/smihandler.c new file mode 100644 index 0000000..090f037 --- /dev/null +++ b/src/mainboard/lenovo/thinkpad_x60/smihandler.c @@ -0,0 +1,207 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/i82801gx/nvs.h" +#include "southbridge/intel/i82801gx/i82801gx.h" +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <ec/lenovo/h8/h8.h> +#include <delay.h> +#include "dock.h" +#include "smi.h" + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); + /* Enable 0x1600/0x1600 register pair */ + ec_set_bit(0x00, 0x05); +} + +static void mainboard_smi_save_cmos(void) +{ + u8 val; + u8 tmp70, tmp72; + + tmp70 = inb(0x70); + tmp72 = inb(0x72); + + val = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4); + set_option("tft_brightness", &val); + val = ec_read(H8_VOLUME_CONTROL); + set_option("volume", &val); + + outb(tmp70, 0x70); + outb(tmp72, 0x72); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + case SMI_DOCK_CONNECT: + ec_clr_bit(0x03, 2); + udelay(250000); + if (!dock_connect()) { + ec_set_bit(0x03, 2); + /* set dock LED to indicate status */ + ec_write(0x0c, 0x09); + ec_write(0x0c, 0x88); + } else { + /* blink dock LED to indicate failure */ + ec_write(0x0c, 0x08); + ec_write(0x0c, 0xc9); + } + break; + + case SMI_DOCK_DISCONNECT: + ec_clr_bit(0x03, 2); + dock_disconnect(); + break; + + case SMI_SAVE_CMOS: + mainboard_smi_save_cmos(); + break; + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +static void mainboard_smi_brightness_up(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); +} + +static void mainboard_smi_brightness_down(void) +{ + u8 value; + + if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) + pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value - 0x10) & 0xf0); +} + +static void mainboard_smi_handle_ec_sci(void) +{ + u8 status = inb(EC_SC); + u8 event; + + if (!(status & EC_SCI_EVT)) + return; + + event = ec_query(); + printk(BIOS_DEBUG, "EC event %02x\n", event); + + switch(event) { + /* brightness up */ + case 0x14: + mainboard_smi_brightness_up(); + mainboard_smi_save_cmos(); + break; + /* brightness down */ + case 0x15: + mainboard_smi_brightness_down(); + mainboard_smi_save_cmos(); + break; + /* Fn-F9 key */ + case 0x18: + /* Power loss */ + case 0x27: + /* Undock Key */ + case 0x50: + mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); + break; + /* Dock Event */ + case 0x37: + case 0x58: + mainboard_io_trap_handler(SMI_DOCK_CONNECT); + break; + default: + break; + } +} + +void mainboard_smi_gpi(u32 gpi) +{ + if (gpi & (1 << 12)) + mainboard_smi_handle_ec_sci(); +} + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); + + if (!pmbase) + return 0; + + switch(data) { + case APM_CNT_ACPI_ENABLE: + /* use 0x1600/0x1604 to prevent races with userspace */ + ec_set_ports(0x1604, 0x1600); + /* route H8SCI to SCI */ + outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + case APM_CNT_ACPI_DISABLE: + /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't + provide a EC query function */ + ec_set_ports(0x66, 0x62); + /* route H8SCI# to SMI */ + outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + /* discard all events, and enable attention */ + ec_write(0x80, 0x01); + break; + default: + break; + } + return 0; +} diff --git a/src/mainboard/lenovo/x200/Kconfig b/src/mainboard/lenovo/x200/Kconfig deleted file mode 100644 index 3fc6bcb..0000000 --- a/src/mainboard/lenovo/x200/Kconfig +++ /dev/null @@ -1,49 +0,0 @@ -if BOARD_LENOVO_X200 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_BGA956 - select NORTHBRIDGE_INTEL_GM45 - select SOUTHBRIDGE_INTEL_I82801IX - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select DRIVERS_ICS_954309 - select BOARD_ROMSIZE_KB_8192 - select DRIVERS_GENERIC_IOAPIC - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select EC_ACPI - select EARLY_CBMEM_INIT - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_ACPI_RESUME - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select INTEL_INT15 - -config MAINBOARD_DIR - string - default lenovo/x200 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad X200" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 2 - -endif # BOARD_LENOVO_X200 diff --git a/src/mainboard/lenovo/x200/Makefile.inc b/src/mainboard/lenovo/x200/Makefile.inc deleted file mode 100644 index 4eb1216..0000000 --- a/src/mainboard/lenovo/x200/Makefile.inc +++ /dev/null @@ -1,20 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2012 secunet Security Networks AG -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-y += dock.c diff --git a/src/mainboard/lenovo/x200/acpi/dock.asl b/src/mainboard/lenovo/x200/acpi/dock.asl deleted file mode 100644 index 605836b..0000000 --- a/src/mainboard/lenovo/x200/acpi/dock.asl +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Scope (_SB) -{ - Device(DOCK) - { - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_DCK, 1, NotSerialized) - { - if (Arg0) { - /* connect dock */ - Store (1, \GP28) - Store (1, _SB.PCI0.LPCB.EC.DKR1) - } else { - /* disconnect dock */ - Store (0, \GP28) - Store (0, _SB.PCI0.LPCB.EC.DKR1) - } - Xor(Arg0, _SB.PCI0.LPCB.EC.DKR1, Local0) - Return (Local0) - } - - Method(_STA, 0, NotSerialized) - { - Return (_SB.PCI0.LPCB.EC.DKR1) - } - } -} - -Scope(_SB.PCI0.LPCB.EC) -{ - Method(_Q18, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q45, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q58, 0, NotSerialized) - { - Notify(_SB.DOCK, 0) - } - - Method(_Q37, 0, NotSerialized) - { - Notify(_SB.DOCK, 0) - } -} diff --git a/src/mainboard/lenovo/x200/acpi/ec.asl b/src/mainboard/lenovo/x200/acpi/ec.asl deleted file mode 100644 index c3569e8..0000000 --- a/src/mainboard/lenovo/x200/acpi/ec.asl +++ /dev/null @@ -1 +0,0 @@ -#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/x200/acpi/gm45_pci_irqs.asl b/src/mainboard/lenovo/x200/acpi/gm45_pci_irqs.asl deleted file mode 100644 index 83c7762..0000000 --- a/src/mainboard/lenovo/x200/acpi/gm45_pci_irqs.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * gm45 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, 0, 16 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - // USB and EHCI 0:1a.x - Package() { 0x001affff, 0, 0, 16 }, - Package() { 0x001affff, 1, 0, 17 }, - Package() { 0x001affff, 2, 0, 18 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, 0, 16 }, - Package() { 0x001dffff, 1, 0, 17 }, - Package() { 0x001dffff, 2, 0, 18 }, - // FIXME - // CardBus/IEEE1394 0:1e.2, 0:1e.3 - // Package() { 0x001effff, 0, 0, 22 }, - // Package() { 0x001effff, 1, 0, 20 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, 0, 16 }, - Package() { 0x001fffff, 1, 0, 17 }, - Package() { 0x001fffff, 2, 0, 18 } - }) - } Else { - Return (Package() { - // PCIe Graphics 0:1.0 - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // USB and EHCI 0:1a.x - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // USB and EHCI 0:1d.x - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, - // FIXME - // CardBus/IEEE1394 0:1e.2, 0:1e.3 - // Package() { 0x001effff, 0, _SB.PCI0.LPCB.LNKG, 0 }, - // Package() { 0x001effff, 1, _SB.PCI0.LPCB.LNKE, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKC, 0 } - }) - } -} - diff --git a/src/mainboard/lenovo/x200/acpi/gpe.asl b/src/mainboard/lenovo/x200/acpi/gpe.asl deleted file mode 100644 index cc6075f..0000000 --- a/src/mainboard/lenovo/x200/acpi/gpe.asl +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Scope (_GPE) -{ - Method(_L18, 0, NotSerialized) - { - /* Read EC register to clear wake status */ - Store(_SB.PCI0.LPCB.EC.WAKE, Local0) - } - - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP04.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP04.HPCS) - If (_SB.PCI0.RP04.PDC) - { - Store (0x01, _SB.PCI0.RP04.PDC) - Notify (_SB.PCI0.RP04, 0x00) - } - } - } -} diff --git a/src/mainboard/lenovo/x200/acpi/ich9_pci_irqs.asl b/src/mainboard/lenovo/x200/acpi/ich9_pci_irqs.asl deleted file mode 100644 index 325f13c..0000000 --- a/src/mainboard/lenovo/x200/acpi/ich9_pci_irqs.asl +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH9 - */ - -/* TODO: which slots are actually relevant? */ -If (PICM) { - Return (Package() { - // PCI Slot 1 routes ABCD - Package() { 0x0000ffff, 0, 0, 16}, - Package() { 0x0000ffff, 1, 0, 17}, - Package() { 0x0000ffff, 2, 0, 18}, - Package() { 0x0000ffff, 3, 0, 19}, - - // PCI Slot 2 routes BCDA - Package() { 0x0001ffff, 0, 0, 17}, - Package() { 0x0001ffff, 1, 0, 18}, - Package() { 0x0001ffff, 2, 0, 19}, - Package() { 0x0001ffff, 3, 0, 16}, - - // PCI Slot 3 routes CDAB - Package() { 0x0002ffff, 0, 0, 18}, - Package() { 0x0002ffff, 1, 0, 19}, - Package() { 0x0002ffff, 2, 0, 16}, - Package() { 0x0002ffff, 3, 0, 17}, - - // PCI Slot 4 routes ABCD - Package() { 0x0003ffff, 0, 0, 16}, - Package() { 0x0003ffff, 1, 0, 17}, - Package() { 0x0003ffff, 2, 0, 18}, - Package() { 0x0003ffff, 3, 0, 19}, - - // PCI Slot 5 routes ABCD - Package() { 0x0004ffff, 0, 0, 16}, - Package() { 0x0004ffff, 1, 0, 17}, - Package() { 0x0004ffff, 2, 0, 18}, - Package() { 0x0004ffff, 3, 0, 19}, - - // PCI Slot 6 routes BCDA - Package() { 0x0005ffff, 0, 0, 17}, - Package() { 0x0005ffff, 1, 0, 18}, - Package() { 0x0005ffff, 2, 0, 19}, - Package() { 0x0005ffff, 3, 0, 16}, - - // FIXME: what's this supposed to mean? (adopted from ich7) - //Package() { 0x0008ffff, 0, 0, 20}, - }) -} Else { - Return (Package() { - // PCI Slot 1 routes ABCD - Package() { 0x0000ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0000ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0000ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0000ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, - - // PCI Slot 2 routes BCDA - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0001ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0001ffff, 2, _SB.PCI0.LPCB.LNKD, 0}, - Package() { 0x0001ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, - - // PCI Slot 3 routes CDAB - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0002ffff, 1, _SB.PCI0.LPCB.LNKD, 0}, - Package() { 0x0002ffff, 2, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0002ffff, 3, _SB.PCI0.LPCB.LNKB, 0}, - - // PCI Slot 4 routes ABCD - Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0003ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0003ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0003ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, - - // PCI Slot 5 routes ABCD - Package() { 0x0004ffff, 0, _SB.PCI0.LPCB.LNKA, 0}, - Package() { 0x0004ffff, 1, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0004ffff, 2, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0004ffff, 3, _SB.PCI0.LPCB.LNKD, 0}, - - // PCI Slot 6 routes BCDA - Package() { 0x0005ffff, 0, _SB.PCI0.LPCB.LNKB, 0}, - Package() { 0x0005ffff, 1, _SB.PCI0.LPCB.LNKC, 0}, - Package() { 0x0005ffff, 2, _SB.PCI0.LPCB.LNKD, 0}, - Package() { 0x0005ffff, 3, _SB.PCI0.LPCB.LNKA, 0}, - - // FIXME - // Package() { 0x0008ffff, 0, _SB.PCI0.LPCB.LNKE, 0}, - }) -} - diff --git a/src/mainboard/lenovo/x200/acpi/platform.asl b/src/mainboard/lenovo/x200/acpi/platform.asl deleted file mode 100644 index 19b1e00..0000000 --- a/src/mainboard/lenovo/x200/acpi/platform.asl +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // Call a trap so SMI can prepare for Sleep as well. - // TRAP(0x55) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - // TODO: Return Arg0 as second value if S-Arg0 was entered - // before. - - Return(Package(){0,0}) -} - -// Power notification - -External (_PR_.CPU0, DeviceObj) -External (_PR_.CPU1, DeviceObj) - -Method (PNOT) -{ - If (MPEN) { - If(And(PDC0, 0x08)) { - Notify (_PR_.CPU0, 0x80) // _PPC - - If (And(PDC0, 0x10)) { - Sleep(100) - Notify(_PR_.CPU0, 0x81) // _CST - } - } - - If(And(PDC1, 0x08)) { - Notify (_PR_.CPU1, 0x80) // _PPC - If (And(PDC1, 0x10)) { - Sleep(100) - Notify(_PR_.CPU1, 0x81) // _CST - } - } - - } Else { // UP - Notify (_PR_.CPU0, 0x80) - Sleep(0x64) - Notify(_PR_.CPU0, 0x81) - } - -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - // TRAP(71) // TODO - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - /* Linux answers _OSI with "True" for a couple of - * Windows version queries. But unlike Windows it - * needs a Video repost, so let's determine whether - * we're running Linux. - */ - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - - /* And the OS workarounds start right after we know what we're - * running: Windows XP SP1 needs to have C-State coordination - * enabled in SMM. - */ - If (LAnd(LEqual(OSYS, 2001), MPEN)) { - // TRAP(61) // TODO - } - - /* SMM power state and C4-on-C3 settings need to be updated */ - // TRAP(43) // TODO - } -} - diff --git a/src/mainboard/lenovo/x200/acpi/superio.asl b/src/mainboard/lenovo/x200/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/lenovo/x200/acpi_tables.c b/src/mainboard/lenovo/x200/acpi_tables.c deleted file mode 100644 index 77491dc..0000000 --- a/src/mainboard/lenovo/x200/acpi_tables.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#include "southbridge/intel/i82801ix/nvs.h" -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - - /* Enable both COM ports */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays */ - gnvs->ndid = 0; /* Will use default of 0x00000400. */ - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); - - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/x200/board_info.txt b/src/mainboard/lenovo/x200/board_info.txt deleted file mode 100644 index 60496f5..0000000 --- a/src/mainboard/lenovo/x200/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: SOIC-16 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/x200/cmos.default b/src/mainboard/lenovo/x200/cmos.default deleted file mode 100644 index 1da4c7c..0000000 --- a/src/mainboard/lenovo/x200/cmos.default +++ /dev/null @@ -1,15 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -trackpoint=Enable -fn_ctrl_swap=Disable -sticky_fn=Disable -power_management_beeps=Enable -low_battery_beep=Enable -sata_mode=AHCI diff --git a/src/mainboard/lenovo/x200/cmos.layout b/src/mainboard/lenovo/x200/cmos.layout deleted file mode 100644 index c668923..0000000 --- a/src/mainboard/lenovo/x200/cmos.layout +++ /dev/null @@ -1,167 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2008 coresystems GmbH -# 2012 secunet Security Networks AG -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 240 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: EC -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 10 sata_mode - -# coreboot config options: EC -409 1 e 9 first_battery -410 1 e 1 bluetooth -411 1 e 1 wwan -412 1 e 1 wlan -413 1 e 1 trackpoint -414 1 e 1 fn_ctrl_swap -415 1 e 1 sticky_fn - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default - -936 1 e 1 power_management_beeps -937 1 e 1 low_battery_beep -938 1 e 1 uwb - -# coreboot config options: northbridge -939 3 e 11 gfx_uma_size - -#942 2 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 unused - -# ram initialization internal data -1024 128 r 0 read_training_results - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 No -8 1 Yes -9 0 Secondary -9 1 Primary -10 0 AHCI -10 1 Compatible -11 0 32M -11 1 48M -11 2 64M -11 3 128M -11 5 96M -11 6 160M - -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 - diff --git a/src/mainboard/lenovo/x200/cstates.c b/src/mainboard/lenovo/x200/cstates.c deleted file mode 100644 index aacfc31..0000000 --- a/src/mainboard/lenovo/x200/cstates.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/acpigen.h> -#include <device/device.h> /* fix for i82801ix.h */ -#include <southbridge/intel/i82801ix/i82801ix.h> - -static acpi_cstate_t cst_entries[] = { - { - /* acpi C1 / cpu C1 */ - 1, 0x01, 1000, - { ACPI_ADDRESS_SPACE_FIXED, 1, 2, { 1 }, 0, 0 } - }, - { - /* acpi C2 / cpu C2 */ - 2, 0x01, 500, - { ACPI_ADDRESS_SPACE_FIXED, 1, 2, { 1 }, 0x10, 0 } - }, -}; - -int get_cst_entries(acpi_cstate_t **entries) -{ - *entries = cst_entries; - return ARRAY_SIZE(cst_entries); -} diff --git a/src/mainboard/lenovo/x200/devicetree.cb b/src/mainboard/lenovo/x200/devicetree.cb deleted file mode 100644 index 376273a..0000000 --- a/src/mainboard/lenovo/x200/devicetree.cb +++ /dev/null @@ -1,203 +0,0 @@ -chip northbridge/intel/gm45 - - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "0" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "4" - - device cpu_cluster 0 on - chip cpu/intel/socket_BGA956 - device lapic 0 on end - end - chip cpu/intel/model_1067x - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Enable Super LFM - register "slfm" = "1" - - # Enable C5, C6 - register "c5" = "1" - register "c6" = "1" - end - end - - device domain 0 on - device pci 00.0 on - subsystemid 0x17aa 0x20e0 - end # host bridge - device pci 02.0 on # VGA - subsystemid 0x17aa 0x20e4 - ioapic_irq 2 INTA 0x10 - end - device pci 02.1 on - subsystemid 0x17aa 0x20e4 - end # Display - device pci 03.0 on - subsystemid 0x17aa 0x20e6 - end # ME - device pci 03.1 off end # ME - device pci 03.2 off end # ME - device pci 03.3 off end # ME - chip southbridge/intel/i82801ix - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - register "gpi8_routing" = "2" - register "gpe0_en" = "0x01000000" - register "gpi1_routing" = "2" - - # Set AHCI mode, enable ports 1 and 2. - register "sata_port_map" = "0x03" - register "sata_clock_request" = "0" - register "sata_traffic_monitor" = "0" - - # Set c-state support - register "c4onc3_enable" = "0" - register "c5_enable" = "1" - register "c6_enable" = "1" - - # Set thermal throttling to 75%. - register "throttle_duty" = "THTL_75_0" - - # Enable PCIe ports 1,2,4 as slots (Mini * PCIe). - register "pcie_slot_implemented" = "0xb" - # Set power limits to 10 * 10^0 watts. - # Maybe we should set less for Mini PCIe. - register "pcie_power_limits" = "{ { 10, 0 }, { 10, 0 }, { 0, 0 }, { 10, 0 }, { 0, 0 }, { 0, 0 } }" - - chip drivers/generic/ioapic - register "have_isa_interrupts" = "1" - register "irq_on_fsb" = "1" - register "enable_virtual_wire" = "1" - register "base" = "0xfec00000" - device ioapic 2 on end - end - - device pci 19.0 on end # LAN - device pci 1a.0 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTA 0x10 - end - device pci 1a.1 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTB 0x11 - end - device pci 1a.2 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTC 0x12 - end - device pci 1a.7 on # EHCI - subsystemid 0x17aa 0x20f1 - ioapic_irq 2 INTC 0x12 - end - device pci 1b.0 on # HD Audio - subsystemid 0x17aa 0x20f2 - ioapic_irq 2 INTA 0x10 - end - device pci 1c.0 on # PCIe Port #1 - subsystemid 0x17aa 0x20f3 # WWAN - ioapic_irq 2 INTA 0x10 - end - device pci 1c.1 on - subsystemid 0x17aa 0x20f3 # WLAN - end # PCIe Port #2 - device pci 1c.2 on - subsystemid 0x17aa 0x20f3 # UWB - end # PCIe Port #3 - device pci 1c.3 on - subsystemid 0x17aa 0x20f3 # Expresscard - end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1d.0 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTA 0x10 - end - device pci 1d.1 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTB 0x11 - end - device pci 1d.2 on # UHCI - subsystemid 0x17aa 0x20f0 - ioapic_irq 2 INTC 0x12 - end - device pci 1d.7 on # EHCI - subsystemid 0x17aa 0x20f1 - ioapic_irq 2 INTA 0x10 - end - device pci 1e.0 on # PCI - subsystemid 0x17aa 0x20f4 - end - device pci 1f.0 on # LPC bridge - subsystemid 0x17aa 0x20f5 - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa6" - register "config1" = "0x04" - register "config2" = "0xa0" - register "config3" = "0x01" - - register "beepmask0" = "0xfe" - register "beepmask1" = "0x96" - register "has_power_management_beeps" = "1" - register "has_uwb" = "1" - - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xf4" - register "event5_enable" = "0x3c" - register "event6_enable" = "0x80" - register "event7_enable" = "0x01" - register "eventc_enable" = "0x3c" - register "event8_enable" = "0x01" - register "event9_enable" = "0xff" - register "eventa_enable" = "0xff" - register "eventb_enable" = "0xff" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - end - end - device pci 1f.2 on # SATA/IDE 1 - subsystemid 0x17aa 0x20f8 - ioapic_irq 2 INTB 0x11 - end - device pci 1f.3 on # SMBus - subsystemid 0x17aa 0x20f9 - ioapic_irq 2 INTC 0x12 - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end - device pci 1f.5 off end # SATA/IDE 2 - device pci 1f.6 off end # Thermal - end - end -end diff --git a/src/mainboard/lenovo/x200/dock.c b/src/mainboard/lenovo/x200/dock.c deleted file mode 100644 index 6f9e953..0000000 --- a/src/mainboard/lenovo/x200/dock.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define __SIMPLE_DEVICE__ -#include <console/console.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <delay.h> -#include "dock.h" -#include "southbridge/intel/i82801ix/i82801ix.h" -#include "ec/lenovo/h8/h8.h" -#include <ec/acpi/ec.h> - -#define LPC_DEV PCI_DEV(0, 0x1f, 0) - -void h8_mainboard_init_dock (void) -{ - if (dock_present()) { - printk(BIOS_DEBUG, "dock is connected\n"); - dock_connect(); - } else - printk(BIOS_DEBUG, "dock is not connected\n"); -} - -void dock_connect(void) -{ - u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; - ec_set_bit(0x02, 0); - outl(inl(gpiobase + 0x0c) | (1 << 28), gpiobase + 0x0c); -} - -void dock_disconnect(void) -{ - u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; - ec_clr_bit(0x02, 0); - outl(inl(gpiobase + 0x0c) & ~(1 << 28), gpiobase + 0x0c); -} - -int dock_present(void) -{ - u16 gpiobase = pci_read_config16(LPC_DEV, D31F0_GPIO_BASE) & 0xfffc; - u8 st = inb(gpiobase + 0x0c); - - return ((st >> 2) & 7) != 7; -} diff --git a/src/mainboard/lenovo/x200/dock.h b/src/mainboard/lenovo/x200/dock.h deleted file mode 100644 index e888583..0000000 --- a/src/mainboard/lenovo/x200/dock.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef THINKPAD_X200_DOCK_H -#define THINKPAD_X200_DOCK_H - -extern void dock_connect(void); -extern void dock_disconnect(void); -extern int dock_present(void); -#endif diff --git a/src/mainboard/lenovo/x200/dsdt.asl b/src/mainboard/lenovo/x200/dsdt.asl deleted file mode 100644 index eb6ce6d..0000000 --- a/src/mainboard/lenovo/x200/dsdt.asl +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP04_IS_EXPRESSCARD 1 -#define DISPLAY_DEVICE_2_IS_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, // DSDT revision: ACPI v3.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/i82801ix/acpi/globalnvs.asl> - - // General Purpose Events - #include "acpi/gpe.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/gm45/acpi/gm45.asl> - #include <southbridge/intel/i82801ix/acpi/ich9.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801ix/acpi/sleepstates.asl> - - /* Dock support code */ - #include "acpi/dock.asl" -} diff --git a/src/mainboard/lenovo/x200/fadt.c b/src/mainboard/lenovo/x200/fadt.c deleted file mode 100644 index fef9721..0000000 --- a/src/mainboard/lenovo/x200/fadt.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 0x00; - fadt->preferred_pm_profile = PM_MOBILE; - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = APM_CNT_PST_CONTROL; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; /* Upper word is reserved and - Linux complains about 32 bit. */ - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = APM_CNT_CST_CONTROL; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 0x39; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x32; - fadt->iapc_boot_arch = 0x00; - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_DOCKING_SUPPORTED | ACPI_FADT_RESET_REGISTER | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - fadt->reset_value = 0x06; - - fadt->x_firmware_ctl_l = 0; /* Set X_FIRMWARE_CTRL only if FACS is */ - fadt->x_firmware_ctl_h = 0; /* above 4GB. If X_FIRMWARE_CTRL is set, */ - /* then FIRMWARE_CTRL must be zero. */ - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 0; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; /* Upper word is reserved and - Linux complains about 32 bit. */ - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 0; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 0; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/lenovo/x200/hda_verb.c b/src/mainboard/lenovo/x200/hda_verb.c deleted file mode 100644 index c1cd542..0000000 --- a/src/mainboard/lenovo/x200/hda_verb.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * 2012 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x14f15051, // Conexant CX20561 (Hermosa) - 0x17aa20ff, // Subsystem ID - 0x00000008, // Number of entries - - /* Pin Widget Verb Table */ - - AZALIA_PIN_CFG(0, 0x16, 0x042140f0), - AZALIA_PIN_CFG(0, 0x17, 0x61a190f0), - AZALIA_PIN_CFG(0, 0x18, 0x04a190f0), - AZALIA_PIN_CFG(0, 0x19, 0x612140f0), - AZALIA_PIN_CFG(0, 0x1a, 0x901701f0), - AZALIA_PIN_CFG(0, 0x1b, 0x40f001f0), - AZALIA_PIN_CFG(0, 0x1c, 0x40f001f0), - AZALIA_PIN_CFG(0, 0x1d, 0x90a601f0) -}; - -const u32 pc_beep_verbs[] = { - 0x00170500, /* power up codec */ - 0x01470500, /* power up speakers */ - 0x01470100, /* select lout1 (input 0x0) for speakers */ - 0x01470740, /* enable speakers output */ - 0x00b37517, /* unmute beep (mixer's input 0x5), set amp 0dB */ - 0x00c37100, /* unmute mixer in lout1 (lout1 input 0x1) */ - 0x00c3b015, /* set lout1 output volume -15dB */ - 0x0143b000, /* unmute speakers */ -}; -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/x200/mainboard.c b/src/mainboard/lenovo/x200/mainboard.c deleted file mode 100644 index 0054064..0000000 --- a/src/mainboard/lenovo/x200/mainboard.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <arch/io.h> -//#include <pc80/mc146818rtc.h> -#include <device/device.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <pc80/keyboard.h> -#include <ec/acpi/ec.h> -#include <smbios.h> -#include <string.h> -#include <build.h> -#include <ec/lenovo/pmh7/pmh7.h> -#include <ec/acpi/ec.h> -#include <ec/lenovo/h8/h8.h> - -#include "cstates.c" /* Include it, as the linker won't find - the overloaded weak function in there. */ - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - -static void mainboard_init(device_t dev) -{ - /* This sneaked in here, because X200 SuperIO chip isn't really - connected to anything and hence we don't init it. - */ - pc_keyboard_init(); -} - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 2); - - dev->ops->init = mainboard_init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; - diff --git a/src/mainboard/lenovo/x200/mptable.c b/src/mainboard/lenovo/x200/mptable.c deleted file mode 100644 index f1839f0..0000000 --- a/src/mainboard/lenovo/x200/mptable.c +++ /dev/null @@ -1 +0,0 @@ -/* dummy file */ diff --git a/src/mainboard/lenovo/x200/romstage.c b/src/mainboard/lenovo/x200/romstage.c deleted file mode 100644 index dcb4e16..0000000 --- a/src/mainboard/lenovo/x200/romstage.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 secunet Security Networks AG - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// __PRE_RAM__ means: use "unsigned" for device, not a struct. - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/tsc.h> -#include <cbmem.h> -#include <lib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <southbridge/intel/i82801ix/i82801ix.h> -#include <northbridge/intel/gm45/gm45.h> - -#define LPC_DEV PCI_DEV(0, 0x1f, 0) -#define MCH_DEV PCI_DEV(0, 0, 0) - -static void default_southbridge_gpio_setup(void) -{ - outl(0x197e23fe, DEFAULT_GPIOBASE + 0x00); - outl(0xe1a66dfe, DEFAULT_GPIOBASE + 0x04); - outl(0xe3faef3f, DEFAULT_GPIOBASE + 0x0c); - - /* Disable blink [31:0]. */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); - /* Set input inversion [31:0]. */ - outl(0x00000102, DEFAULT_GPIOBASE + 0x2c); - - /* Enable GPIOs [60:32]. */ - outl(0x030306f6, DEFAULT_GPIOBASE + 0x30); - /* Set input/output mode [60:32] (0 == out, 1 == in). */ - outl(0x1f55f9f1, DEFAULT_GPIOBASE + 0x34); - /* Set gpio levels [60:32]. */ - outl(0x1dffff53, DEFAULT_GPIOBASE + 0x38); -} - -static void early_lpc_setup(void) -{ - /* Set up SuperIO LPC forwards */ - - /* Configure serial IRQs.*/ - pci_write_config8(LPC_DEV, D31F0_SERIRQ_CNTL, 0xd0); - /* Map COMa on 0x3f8, COMb on 0x2f8. */ - pci_write_config16(LPC_DEV, D31F0_LPC_IODEC, 0x0010); - pci_write_config16(LPC_DEV, D31F0_LPC_EN, 0x3f0f); - pci_write_config32(LPC_DEV, D31F0_GEN1_DEC, 0x7c1601); - pci_write_config32(LPC_DEV, D31F0_GEN2_DEC, 0xc15e1); - pci_write_config32(LPC_DEV, D31F0_GEN3_DEC, 0x1c1681); -} - -void main(unsigned long bist) -{ - sysinfo_t sysinfo; - int s3resume = 0; - int cbmem_initted; - u16 reg16; - - /* Enable expresscard hotplug events. */ - pci_write_config32(PCI_DEV (0, 0x1c, 3), - 0xd8, - pci_read_config32(PCI_DEV (0, 0x1c, 3), 0xd8) - | (1 << 30)); - pci_write_config16(PCI_DEV (0, 0x1c, 3), - 0x42, 0x141); - - /* basic northbridge setup, including MMCONF BAR */ - gm45_early_init(); - - if (bist == 0) - enable_lapic(); - - /* First, run everything needed for console output. */ - i82801ix_early_init(); - early_lpc_setup(); - console_init(); - printk(BIOS_DEBUG, "running main(bist = %lu)\n", bist); - - reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3); - pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16); - if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) { - printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); - gm45_early_reset(); - } - - default_southbridge_gpio_setup(); - - /* ASPM related setting, set early by original BIOS. */ - DMIBAR16(0x204) &= ~(3 << 10); - - /* Check for S3 resume. */ - const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04); - if (((pm1_cnt >> 10) & 7) == 5) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - s3resume = 1; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04); -#else - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); -#endif - } - - /* RAM initialization */ - enter_raminit_or_reset(); - memset(&sysinfo, 0, sizeof(sysinfo)); - sysinfo.spd_map[0] = 0x50; - sysinfo.spd_map[2] = 0x51; - sysinfo.enable_igd = 1; - sysinfo.enable_peg = 0; - get_gmch_info(&sysinfo); - raminit(&sysinfo, s3resume); - - const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN); - /* Disable D4F0 (unknown signal controller). */ - pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000); - - init_pm(&sysinfo, 0); - - i82801ix_dmi_setup(); - gm45_late_init(sysinfo.stepping); - i82801ix_dmi_poll_vc1(); - - MCHBAR16(SSKPD_MCHBAR) = 0xCAFE; - /* Enable ethernet. */ - RCBA32(0x3414) &= ~0x20; - - RCBA32(0x0238) = 0x00543210; - RCBA32(0x0240) = 0x009c0b02; - RCBA32(0x0244) = 0x00a20b1a; - RCBA32(0x0248) = 0x005402cb; - RCBA32(0x0254) = 0x00470966; - RCBA32(0x0258) = 0x00470473; - RCBA32(0x0260) = 0x00e90825; - RCBA32(0x0278) = 0x00bc0efb; - RCBA32(0x027c) = 0x00c00f0b; - RCBA32(0x0280) = 0x00670000; - RCBA32(0x0284) = 0x006d0000; - RCBA32(0x0288) = 0x00600b4e; - RCBA32(0x1e10) = 0x00020800; - RCBA32(0x1e18) = 0x36ea00a0; - RCBA32(0x1e80) = 0x000c0801; - RCBA32(0x1e84) = 0x000200f0; - RCBA32(0x2028) = 0x04c8f95e; - RCBA32(0x202c) = 0x055c095e; - RCBA32(0x204c) = 0x001ffc00; - RCBA32(0x2050) = 0x00100fff; - RCBA32(0x2090) = 0x37000000; - RCBA32(0x20b0) = 0x0c000000; - RCBA32(0x20d0) = 0x09000000; - RCBA32(0x20f0) = 0x05000000; - RCBA32(0x3400) = 0x0000001c; - RCBA32(0x3410) = 0x00100461; - RCBA32(0x3414) = 0x00000000; - RCBA32(0x341c) = 0xbf4f001f; - RCBA32(0x3420) = 0x00000000; - RCBA32(0x3430) = 0x00000001; - - init_iommu(); - - /* FIXME: make a proper SMBUS mux support. */ - outl(inl(DEFAULT_GPIOBASE + 0x38) & ~0x400, DEFAULT_GPIOBASE + 0x38); - - cbmem_initted = !cbmem_recovery(s3resume); -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if (s3resume && cbmem_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0, 0), D0F0_SKPD, SKPAD_ACPI_S3_MAGIC); - } else { - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0, 0), D0F0_SKPD, SKPAD_NORMAL_BOOT_MAGIC); - } -#endif - printk(BIOS_SPEW, "exit main()\n"); -} - diff --git a/src/mainboard/lenovo/x200/smihandler.c b/src/mainboard/lenovo/x200/smihandler.c deleted file mode 100644 index baa038e..0000000 --- a/src/mainboard/lenovo/x200/smihandler.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <southbridge/intel/i82801ix/nvs.h> -#include <southbridge/intel/i82801ix/i82801ix.h> -#include <ec/acpi/ec.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -int mainboard_io_trap_handler(int smif) -{ - switch (smif) { - case 0x99: - printk(BIOS_DEBUG, "Sample\n"); - gnvs->smif = 0; - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - * - * For now, we force the return value to 0 and log all traps to - * see what's going on. - */ - //gnvs->smif = 0; - return 1; -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 1)) { - printk(BIOS_DEBUG, "EC/SMI\n"); - /* TODO */ - } -} - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APM_CNT_ACPI_ENABLE: - send_ec_command(0x05); /* Set_SMI_Disable */ - send_ec_command(0xaa); /* Set_ACPI_Enable */ - break; - - case APM_CNT_ACPI_DISABLE: - send_ec_command(0x04); /* Set_SMI_Enable */ - send_ec_command(0xab); /* Set_ACPI_Disable */ - break; - } - return 0; -} diff --git a/src/mainboard/lenovo/x201/Kconfig b/src/mainboard/lenovo/x201/Kconfig deleted file mode 100644 index 3137551..0000000 --- a/src/mainboard/lenovo/x201/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_LENOVO_X201 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select NORTHBRIDGE_INTEL_NEHALEM - select SOUTHBRIDGE_INTEL_IBEXPEAK - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select DRIVERS_ICS_954309 - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select INTEL_INT15 - select HAVE_ACPI_RESUME - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select SUPERIO_NSC_PC87382 - select DRIVERS_LENOVO_WACOM - -config MAINBOARD_DIR - string - default lenovo/x201 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad X201" - -config MMCONF_BASE_ADDRESS - hex - default 0xe0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 10 - -config MAX_CPUS - int - default 4 - -config CPU_ADDR_BITS - int - default 36 - -endif diff --git a/src/mainboard/lenovo/x201/Makefile.inc b/src/mainboard/lenovo/x201/Makefile.inc deleted file mode 100644 index eb099f3..0000000 --- a/src/mainboard/lenovo/x201/Makefile.inc +++ /dev/null @@ -1,23 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c -romstage-y += dock.c -ramstage-y += dock.c diff --git a/src/mainboard/lenovo/x201/acpi/dock.asl b/src/mainboard/lenovo/x201/acpi/dock.asl deleted file mode 100644 index 421ee15..0000000 --- a/src/mainboard/lenovo/x201/acpi/dock.asl +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" - -Scope (_SB) -{ - Device(DOCK) - { - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_DCK, 1, NotSerialized) - { - if (Arg0) { - /* connect dock */ - Store (1, \GP28) - Store (1, _SB.PCI0.LPCB.EC.DKR1) - Store (1, _SB.PCI0.LPCB.EC.DKR2) - Store (1, _SB.PCI0.LPCB.EC.DKR3) - } else { - /* disconnect dock */ - Store (0, \GP28) - Store (0, _SB.PCI0.LPCB.EC.DKR1) - Store (0, _SB.PCI0.LPCB.EC.DKR2) - Store (0, _SB.PCI0.LPCB.EC.DKR3) - } - Xor(Arg0, _SB.PCI0.LPCB.EC.DKR1, Local0) - Return (Local0) - } - - Method(_STA, 0, NotSerialized) - { - Return (_SB.PCI0.LPCB.EC.DKR1) - } - } -} - -Scope(_SB.PCI0.LPCB.EC) -{ - Method(_Q18, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q45, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q58, 0, NotSerialized) - { - Notify(_SB.DOCK, 0) - } - - Method(_Q37, 0, NotSerialized) - { - Notify(_SB.DOCK, 0) - } -} diff --git a/src/mainboard/lenovo/x201/acpi/ec.asl b/src/mainboard/lenovo/x201/acpi/ec.asl deleted file mode 100644 index 4b3e72c..0000000 --- a/src/mainboard/lenovo/x201/acpi/ec.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> - -Scope(_SB.PCI0.LPCB.EC) -{ -} diff --git a/src/mainboard/lenovo/x201/acpi/gpe.asl b/src/mainboard/lenovo/x201/acpi/gpe.asl deleted file mode 100644 index 2f0ee16..0000000 --- a/src/mainboard/lenovo/x201/acpi/gpe.asl +++ /dev/null @@ -1,44 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" -Scope (_GPE) -{ - Method(_L18, 0, NotSerialized) - { - /* Read EC register to clear wake status */ - Store(_SB.PCI0.LPCB.EC.WAKE, Local0) - } - - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP04.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP04.HPCS) - If (_SB.PCI0.RP04.PDC) - { - Store (0x01, _SB.PCI0.RP04.PDC) - Notify (_SB.PCI0.RP04, 0x00) - } - } - } -} diff --git a/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl b/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl deleted file mode 100644 index 3e9e1b3..0000000 --- a/src/mainboard/lenovo/x201/acpi/nehalem_pci_irqs.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing. - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0001ffff, 0, 0, 0x10 }, - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x0003ffff, 0, 0, 0x10 }, - Package() { 0x0016ffff, 0, 0, 0x10 }, // ME - Package() { 0x0016ffff, 1, 0, 0x11 }, // ME - Package() { 0x0016ffff, 2, 0, 0x12 }, // ME - Package() { 0x0016ffff, 3, 0, 0x13 }, // ME - Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet - Package() { 0x001affff, 0, 0, 0x14 }, // USB - Package() { 0x001affff, 1, 0, 0x15 }, // USB - Package() { 0x001affff, 2, 0, 0x16 }, // USB - Package() { 0x001affff, 3, 0, 0x17 }, // USB - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x11 }, // SATA - Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS - }) - } Else { - Return (Package() { - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME - Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME - Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME - Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME - Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB - Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB - Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB - Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB - Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus - }) - } -} diff --git a/src/mainboard/lenovo/x201/acpi/platform.asl b/src/mainboard/lenovo/x201/acpi/platform.asl deleted file mode 100644 index 1370117..0000000 --- a/src/mainboard/lenovo/x201/acpi/platform.asl +++ /dev/null @@ -1,148 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, /* APM command */ - APMS, 8 /* APM status */ -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) /* SMI Function */ - Store (0, TRP0) /* Generate trap */ - Return (SMIF) /* Return value of SMI handler */ -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - /* Remember the OS' IRQ routing choice. */ - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - _SB.PCI0.LPCB.EC.MUTE(1) - _SB.PCI0.LPCB.EC.USBP(0) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* Not implemented. */ - Return(Package(){0,0}) -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - /* TRAP(71) */ /* TODO */ - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2001.1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001.1 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2006.1")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2006 SP1")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2009")) { - Store (2009, OSYS) - } - - If (_OSI("Windows 2012")) { - Store (2012, OSYS) - } - } - } -} diff --git a/src/mainboard/lenovo/x201/acpi/superio.asl b/src/mainboard/lenovo/x201/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/lenovo/x201/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/x201/acpi_tables.c b/src/mainboard/lenovo/x201/acpi_tables.c deleted file mode 100644 index b8979f4..0000000 --- a/src/mainboard/lenovo/x201/acpi_tables.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/intel/ibexpeak/nvs.h" - -void acpi_create_gnvs(global_nvs_t * gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - gnvs->pcnt = dev_count_cpu(); - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 1, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, - MP_IRQ_POLARITY_DEFAULT | - MP_IRQ_TRIGGER_DEFAULT); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_LEVEL); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 2, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 3, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/x201/board_info.txt b/src/mainboard/lenovo/x201/board_info.txt deleted file mode 100644 index 689ca8f..0000000 --- a/src/mainboard/lenovo/x201/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/x201/cmos.default b/src/mainboard/lenovo/x201/cmos.default deleted file mode 100644 index 29eb509..0000000 --- a/src/mainboard/lenovo/x201/cmos.default +++ /dev/null @@ -1,18 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -touchpad=Enable -trackpoint=Enable -fn_ctrl_swap=Disable -sticky_fn=Disable -power_management_beeps=Enable -low_battery_beep=Enable -sata_mode=AHCI diff --git a/src/mainboard/lenovo/x201/cmos.layout b/src/mainboard/lenovo/x201/cmos.layout deleted file mode 100644 index cba457f..0000000 --- a/src/mainboard/lenovo/x201/cmos.layout +++ /dev/null @@ -1,157 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2013 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail - -# coreboot config options: EC -411 1 e 8 first_battery -412 1 e 1 bluetooth -413 1 e 1 wwan -414 1 e 1 touchpad -415 1 e 1 wlan -416 1 e 1 trackpoint -417 1 e 1 fn_ctrl_swap -418 1 e 1 sticky_fn -419 1 e 1 power_management_beeps -420 1 e 1 low_battery_beep -421 1 e 9 sata_mode - -#422 2 r 0 unused - -# coreboot config options: northbridge -424 3 e 10 gfx_uma_size - -#427 557 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 32M -10 1 48M -10 2 64M -10 3 128M -10 5 96M -10 6 160M - -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/lenovo/x201/devicetree.cb b/src/mainboard/lenovo/x201/devicetree.cb deleted file mode 100644 index 7592cb0..0000000 --- a/src/mainboard/lenovo/x201/devicetree.cb +++ /dev/null @@ -1,181 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/nehalem - - - # Enable DisplayPort Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "3" - register "gpu_panel_power_up_delay" = "250" - register "gpu_panel_power_down_delay" = "250" - register "gpu_panel_power_backlight_on_delay" = "2500" - register "gpu_panel_power_backlight_off_delay" = "2500" - register "gpu_cpu_backlight" = "0x58d" - register "gpu_pch_backlight" = "0x061a061a" - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "0" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "4" - - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa6" - register "config1" = "0x05" - register "config2" = "0xa0" - register "config3" = "0x01" - - register "beepmask0" = "0xfe" - register "beepmask1" = "0x96" - register "has_power_management_beeps" = "1" - - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xf4" - register "event5_enable" = "0x3c" - register "event6_enable" = "0x80" - register "event7_enable" = "0x01" - register "eventc_enable" = "0x3c" - register "event8_enable" = "0x01" - register "event9_enable" = "0xff" - register "eventa_enable" = "0xff" - register "eventb_enable" = "0xff" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - end - - device cpu_cluster 0 on - chip cpu/intel/model_2065x - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x17aa 0x2193 - end - device pci 02.0 on # VGA controller - subsystemid 0x17aa 0x215a - end - chip southbridge/intel/ibexpeak - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi1_routing" = "2" - register "gpi13_routing" = "2" - - register "sata_port_map" = "0x33" - - register "gpe0_en" = "0x20022046" - register "alt_gp_smi_en" = "0x0000" - register "gen1_dec" = "0x7c1601" - register "gen2_dec" = "0x0c15e1" - register "gen3_dec" = "0x1c1681" - register "gen4_dec" = "0x040069" - - device pci 16.2 on # IDE/SATA - subsystemid 0x17aa 0x2161 - end - - device pci 19.0 on # Ethernet - subsystemid 0x17aa 0x2153 - end - - device pci 1a.0 on # USB2 EHCI - subsystemid 0x17aa 0x2163 - end - - device pci 1b.0 on # Audio Controller - subsystemid 0x17aa 0x215e - end - - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 (wwan) - device pci 1c.3 on end # PCIe Port #4 (Expresscard) - device pci 1c.4 on end # PCIe Port #5 (wlan) - - device pci 1d.0 on # USB2 EHCI - subsystemid 0x17aa 0x2163 - end - device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x17aa 0x2166 - chip superio/nsc/pc87382 - device pnp 164e.3 on # Digitizer - io 0x60 = 0x200 - irq 0x29 = 0xb0 - irq 0x70 = 0x5 - irq 0xf0 = 0x82 - end - # IR, not connected - device pnp 164e.2 off end - # GPIO, not connected - device pnp 164e.7 off end - # DLPC, not connected - device pnp 164e.19 off end - end - end - device pci 1f.2 on # IDE/SATA - subsystemid 0x17aa 0x2168 - end - device pci 1f.3 on # SMBUS - subsystemid 0x17aa 0x2167 - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end - end - end -end diff --git a/src/mainboard/lenovo/x201/dock.c b/src/mainboard/lenovo/x201/dock.c deleted file mode 100644 index 3dba5e1..0000000 --- a/src/mainboard/lenovo/x201/dock.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define __SIMPLE_DEVICE__ -#include <console/console.h> -#include <arch/io.h> -#include <device/device.h> -#include <device/pci.h> -#include <delay.h> -#include "dock.h" -#include "southbridge/intel/ibexpeak/pch.h" -#include "ec/lenovo/h8/h8.h" -#include <ec/acpi/ec.h> - -void h8_mainboard_init_dock (void) -{ - if (dock_present()) { - printk(BIOS_DEBUG, "dock is connected\n"); - dock_connect(); - } else - printk(BIOS_DEBUG, "dock is not connected\n"); -} - -void dock_connect(void) -{ - u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - - ec_set_bit(0x02, 0); - ec_set_bit(0x1a, 0); - ec_set_bit(0xfe, 4); - - outl(inl(gpiobase + 0x0c) | (1 << 28), gpiobase + 0x0c); -} - -void dock_disconnect(void) -{ - u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - - ec_clr_bit(0x02, 0); - ec_clr_bit(0x1a, 0); - ec_clr_bit(0xfe, 4); - - outl(inl(gpiobase + 0x0c) & ~(1 << 28), gpiobase + 0x0c); -} - -int dock_present(void) -{ - u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - u8 st = inb(gpiobase + 0x0c); - - return ((st >> 3) & 7) != 7; -} diff --git a/src/mainboard/lenovo/x201/dock.h b/src/mainboard/lenovo/x201/dock.h deleted file mode 100644 index cfb43f0..0000000 --- a/src/mainboard/lenovo/x201/dock.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef THINKPAD_X201_DOCK_H -#define THINKPAD_X201_DOCK_H - -extern void dock_connect(void); -extern void dock_disconnect(void); -extern int dock_present(void); -#endif diff --git a/src/mainboard/lenovo/x201/dsdt.asl b/src/mainboard/lenovo/x201/dsdt.asl deleted file mode 100644 index 62616a8..0000000 --- a/src/mainboard/lenovo/x201/dsdt.asl +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP04_IS_EXPRESSCARD 1 -#define EC_LENOVO_H8_ME_WORKAROUND 1 -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, /* DSDT revision: ACPI v3.0 */ - "COREv4", /* OEM id */ - "COREBOOT", /* OEM table id */ - 0x20130325 /* OEM revision */ -) -{ - /* Some generic macros */ - #include "acpi/platform.asl" - - /* global NVS and variables */ - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - /* General Purpose Events */ - #include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/nehalem/acpi/nehalem.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - Device (UNCR) - { - Name (_BBN, 0xFF) - Name (_ADR, 0x00) - Name (RID, 0x00) - Name (_HID, EisaId ("PNP0A03")) - Name (_CRS, ResourceTemplate () - { - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* Granularity */ - 0x00FF, /* Range Minimum */ - 0x00FF, /* Range Maximum */ - 0x0000, /* Translation Offset */ - 0x0001, /* Length */ - ,, ) - }) - Device (SAD) - { - Name (_ADR, 0x01) - Name (RID, 0x00) - OperationRegion (SADC, PCI_Config, 0x00, 0x0100) - Field (SADC, DWordAcc, NoLock, Preserve) - { - Offset (0x40), - PAM0, 8, - PAM1, 8, - PAM2, 8, - PAM3, 8, - PAM4, 8, - PAM5, 8, - PAM6, 8 - } - } - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> - - /* Dock support code */ - #include "acpi/dock.asl" -} diff --git a/src/mainboard/lenovo/x201/fadt.c b/src/mainboard/lenovo/x201/fadt.c deleted file mode 100644 index 0639026..0000000 --- a/src/mainboard/lenovo/x201/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -/* FIXME: This needs to go into a separate .h file - * to be included by the ich7 smi handler, ich7 smi init - * code and the mainboard fadt. - */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = - pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - 0x40) & 0xfffe; - - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (unsigned long)facs; - fadt->dsdt = (unsigned long)dsdt; - fadt->model = 0x00; - fadt->preferred_pm_profile = PM_MOBILE; - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = APM_CNT_PST_CONTROL; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 0x10; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = APM_CNT_CST_CONTROL; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 0x23; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x32; - fadt->iapc_boot_arch = 0x00; - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_DOCKING_SUPPORTED; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 0; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 32; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 0; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 0; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, header->length); -} diff --git a/src/mainboard/lenovo/x201/gpio.h b/src/mainboard/lenovo/x201/gpio.h deleted file mode 100644 index f01c9d9..0000000 --- a/src/mainboard/lenovo/x201/gpio.h +++ /dev/null @@ -1,405 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef LENOVO_X201_GPIO_H -#define LENOVO_X201_GPIO_H - -#include "southbridge/intel/bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, - .gpio1 = GPIO_MODE_GPIO, - .gpio2 = GPIO_MODE_GPIO, - .gpio3 = GPIO_MODE_GPIO, - .gpio4 = GPIO_MODE_GPIO, - .gpio5 = GPIO_MODE_GPIO, - .gpio6 = GPIO_MODE_GPIO, - .gpio7 = GPIO_MODE_GPIO, - .gpio8 = GPIO_MODE_GPIO, - .gpio9 = GPIO_MODE_NATIVE, - .gpio10 = GPIO_MODE_GPIO, - .gpio11 = GPIO_MODE_NATIVE, - .gpio12 = GPIO_MODE_NATIVE, - .gpio13 = GPIO_MODE_GPIO, - .gpio14 = GPIO_MODE_NATIVE, - .gpio15 = GPIO_MODE_GPIO, - .gpio16 = GPIO_MODE_GPIO, - .gpio17 = GPIO_MODE_GPIO, - .gpio18 = GPIO_MODE_NATIVE, - .gpio19 = GPIO_MODE_NATIVE, - .gpio20 = GPIO_MODE_NATIVE, - .gpio21 = GPIO_MODE_GPIO, - .gpio22 = GPIO_MODE_GPIO, - .gpio23 = GPIO_MODE_NATIVE, - .gpio24 = GPIO_MODE_GPIO, - .gpio25 = GPIO_MODE_NATIVE, - .gpio26 = GPIO_MODE_NATIVE, - .gpio27 = GPIO_MODE_GPIO, - .gpio28 = GPIO_MODE_GPIO, - .gpio29 = GPIO_MODE_NATIVE, - .gpio30 = GPIO_MODE_NATIVE, - .gpio31 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set1 pch_gpio_set1_reset = { - .gpio0 = GPIO_RESET_PWROK, - .gpio1 = GPIO_RESET_PWROK, - .gpio2 = GPIO_RESET_PWROK, - .gpio3 = GPIO_RESET_PWROK, - .gpio4 = GPIO_RESET_PWROK, - .gpio5 = GPIO_RESET_PWROK, - .gpio6 = GPIO_RESET_PWROK, - .gpio7 = GPIO_RESET_PWROK, - .gpio8 = GPIO_RESET_PWROK, - .gpio9 = GPIO_RESET_PWROK, - .gpio10 = GPIO_RESET_PWROK, - .gpio11 = GPIO_RESET_PWROK, - .gpio12 = GPIO_RESET_PWROK, - .gpio13 = GPIO_RESET_PWROK, - .gpio14 = GPIO_RESET_PWROK, - .gpio15 = GPIO_RESET_PWROK, - .gpio16 = GPIO_RESET_PWROK, - .gpio17 = GPIO_RESET_PWROK, - .gpio18 = GPIO_RESET_PWROK, - .gpio19 = GPIO_RESET_PWROK, - .gpio20 = GPIO_RESET_PWROK, - .gpio21 = GPIO_RESET_PWROK, - .gpio22 = GPIO_RESET_PWROK, - .gpio23 = GPIO_RESET_PWROK, - .gpio24 = GPIO_RESET_RSMRST, - .gpio25 = GPIO_RESET_PWROK, - .gpio26 = GPIO_RESET_PWROK, - .gpio27 = GPIO_RESET_PWROK, - .gpio28 = GPIO_RESET_PWROK, - .gpio29 = GPIO_RESET_PWROK, - .gpio30 = GPIO_RESET_RSMRST, - .gpio31 = GPIO_RESET_PWROK, -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_OUTPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_INPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_OUTPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_OUTPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_INPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_OUTPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_HIGH, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_HIGH, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio6 = GPIO_LEVEL_HIGH, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_HIGH, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_HIGH, - .gpio16 = GPIO_LEVEL_HIGH, - .gpio17 = GPIO_LEVEL_HIGH, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_HIGH, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_HIGH, - .gpio22 = GPIO_LEVEL_HIGH, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_HIGH, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_HIGH, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set1 pch_gpio_set1_blink = { - .gpio0 = GPIO_NO_BLINK, - .gpio1 = GPIO_NO_BLINK, - .gpio2 = GPIO_NO_BLINK, - .gpio3 = GPIO_NO_BLINK, - .gpio4 = GPIO_NO_BLINK, - .gpio5 = GPIO_NO_BLINK, - .gpio6 = GPIO_NO_BLINK, - .gpio7 = GPIO_NO_BLINK, - .gpio8 = GPIO_NO_BLINK, - .gpio9 = GPIO_NO_BLINK, - .gpio10 = GPIO_NO_BLINK, - .gpio11 = GPIO_NO_BLINK, - .gpio12 = GPIO_NO_BLINK, - .gpio13 = GPIO_NO_BLINK, - .gpio14 = GPIO_NO_BLINK, - .gpio15 = GPIO_NO_BLINK, - .gpio16 = GPIO_NO_BLINK, - .gpio17 = GPIO_NO_BLINK, - .gpio18 = GPIO_NO_BLINK, - .gpio19 = GPIO_NO_BLINK, - .gpio20 = GPIO_NO_BLINK, - .gpio21 = GPIO_NO_BLINK, - .gpio22 = GPIO_NO_BLINK, - .gpio23 = GPIO_NO_BLINK, - .gpio24 = GPIO_NO_BLINK, - .gpio25 = GPIO_NO_BLINK, - .gpio26 = GPIO_NO_BLINK, - .gpio27 = GPIO_NO_BLINK, - .gpio28 = GPIO_NO_BLINK, - .gpio29 = GPIO_NO_BLINK, - .gpio30 = GPIO_NO_BLINK, - .gpio31 = GPIO_NO_BLINK, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio0 = GPIO_NO_INVERT, - .gpio1 = GPIO_INVERT, - .gpio2 = GPIO_INVERT, - .gpio3 = GPIO_NO_INVERT, - .gpio4 = GPIO_NO_INVERT, - .gpio5 = GPIO_NO_INVERT, - .gpio6 = GPIO_INVERT, - .gpio7 = GPIO_INVERT, - .gpio8 = GPIO_NO_INVERT, - .gpio9 = GPIO_NO_INVERT, - .gpio10 = GPIO_NO_INVERT, - .gpio11 = GPIO_NO_INVERT, - .gpio12 = GPIO_NO_INVERT, - .gpio13 = GPIO_INVERT, - .gpio14 = GPIO_NO_INVERT, - .gpio15 = GPIO_NO_INVERT, - .gpio16 = GPIO_INVERT, - .gpio17 = GPIO_NO_INVERT, - .gpio18 = GPIO_NO_INVERT, - .gpio19 = GPIO_NO_INVERT, - .gpio20 = GPIO_NO_INVERT, - .gpio21 = GPIO_NO_INVERT, - .gpio22 = GPIO_NO_INVERT, - .gpio23 = GPIO_NO_INVERT, - .gpio24 = GPIO_NO_INVERT, - .gpio25 = GPIO_NO_INVERT, - .gpio26 = GPIO_NO_INVERT, - .gpio27 = GPIO_NO_INVERT, - .gpio28 = GPIO_NO_INVERT, - .gpio29 = GPIO_NO_INVERT, - .gpio30 = GPIO_NO_INVERT, - .gpio31 = GPIO_NO_INVERT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, - .gpio33 = GPIO_MODE_GPIO, - .gpio34 = GPIO_MODE_GPIO, - .gpio35 = GPIO_MODE_GPIO, - .gpio36 = GPIO_MODE_GPIO, - .gpio37 = GPIO_MODE_GPIO, - .gpio38 = GPIO_MODE_GPIO, - .gpio39 = GPIO_MODE_GPIO, - .gpio40 = GPIO_MODE_NATIVE, - .gpio41 = GPIO_MODE_GPIO, - .gpio42 = GPIO_MODE_GPIO, - .gpio43 = GPIO_MODE_NATIVE, - .gpio44 = GPIO_MODE_NATIVE, - .gpio45 = GPIO_MODE_NATIVE, - .gpio46 = GPIO_MODE_NATIVE, - .gpio47 = GPIO_MODE_NATIVE, - .gpio48 = GPIO_MODE_GPIO, - .gpio49 = GPIO_MODE_GPIO, - .gpio50 = GPIO_MODE_GPIO, - .gpio51 = GPIO_MODE_NATIVE, - .gpio52 = GPIO_MODE_GPIO, - .gpio53 = GPIO_MODE_GPIO, - .gpio54 = GPIO_MODE_GPIO, - .gpio55 = GPIO_MODE_NATIVE, - .gpio56 = GPIO_MODE_NATIVE, - .gpio57 = GPIO_MODE_GPIO, - .gpio58 = GPIO_MODE_NATIVE, - .gpio59 = GPIO_MODE_NATIVE, - .gpio60 = GPIO_MODE_NATIVE, - .gpio61 = GPIO_MODE_NATIVE, - .gpio62 = GPIO_MODE_NATIVE, - .gpio63 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_OUTPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_INPUT, - .gpio35 = GPIO_DIR_OUTPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_INPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_OUTPUT, - .gpio42 = GPIO_DIR_OUTPUT, - .gpio43 = GPIO_DIR_INPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_INPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_OUTPUT, - .gpio50 = GPIO_DIR_OUTPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_OUTPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_OUTPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_INPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_HIGH, - .gpio35 = GPIO_LEVEL_HIGH, - .gpio36 = GPIO_LEVEL_HIGH, - .gpio37 = GPIO_LEVEL_HIGH, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_HIGH, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_HIGH, - .gpio48 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_LOW, - .gpio54 = GPIO_LEVEL_LOW, - .gpio55 = GPIO_LEVEL_HIGH, - .gpio56 = GPIO_LEVEL_LOW, - .gpio57 = GPIO_LEVEL_HIGH, - .gpio58 = GPIO_LEVEL_LOW, - .gpio59 = GPIO_LEVEL_LOW, - .gpio60 = GPIO_LEVEL_LOW, - .gpio61 = GPIO_LEVEL_LOW, - .gpio62 = GPIO_LEVEL_LOW, - .gpio63 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, - .gpio65 = GPIO_MODE_NATIVE, - .gpio66 = GPIO_MODE_NATIVE, - .gpio67 = GPIO_MODE_NATIVE, - .gpio68 = GPIO_MODE_NATIVE, - .gpio69 = GPIO_MODE_NATIVE, - .gpio70 = GPIO_MODE_NATIVE, - .gpio71 = GPIO_MODE_NATIVE, - .gpio72 = GPIO_MODE_NATIVE, - .gpio73 = GPIO_MODE_NATIVE, - .gpio74 = GPIO_MODE_NATIVE, - .gpio75 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - .gpio65 = GPIO_DIR_OUTPUT, - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_OUTPUT, - .gpio68 = GPIO_DIR_OUTPUT, - .gpio69 = GPIO_DIR_OUTPUT, - .gpio70 = GPIO_DIR_OUTPUT, - .gpio71 = GPIO_DIR_OUTPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_LOW, - .gpio65 = GPIO_LEVEL_LOW, - .gpio66 = GPIO_LEVEL_LOW, - .gpio67 = GPIO_LEVEL_LOW, - .gpio68 = GPIO_LEVEL_LOW, - .gpio69 = GPIO_LEVEL_LOW, - .gpio70 = GPIO_LEVEL_LOW, - .gpio71 = GPIO_LEVEL_LOW, - .gpio72 = GPIO_LEVEL_LOW, - .gpio73 = GPIO_LEVEL_LOW, - .gpio74 = GPIO_LEVEL_LOW, - .gpio75 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_map x201_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .blink = &pch_gpio_set1_blink, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; - -#endif diff --git a/src/mainboard/lenovo/x201/hda_verb.c b/src/mainboard/lenovo/x201/hda_verb.c deleted file mode 100644 index 22634f0..0000000 --- a/src/mainboard/lenovo/x201/hda_verb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Vladimir Serbinenko. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License, - * or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x14F15069, /* Codec Vendor / Device ID: Conexant CX20585 */ - 0x17AA2155, /* Subsystem ID */ - 0x0000000B, /* Number of 4 dword sets */ - - /* NID 0x01: Subsystem ID. */ - AZALIA_SUBVENDOR(0x0, 0x17AA2155), - - /* NID 0x19: Headphone jack. */ - AZALIA_PIN_CFG(0x0, 0x19, 0x042140F0), - - /* NID 0x1A: Dock mic jack. */ - AZALIA_PIN_CFG(0x0, 0x1A, 0x61A190F0), - - /* NID 0x1B: Mic jack. */ - AZALIA_PIN_CFG(0x0, 0x1B, 0x04A190F0), - - /* NID 0x1C: Dock headphone jack. */ - AZALIA_PIN_CFG(0x0, 0x1C, 0x612140F0), - - /* NID 0x1D: EAPD detect. */ - AZALIA_PIN_CFG(0x0, 0x1D, 0x601700F0), - - /* NID 0x1E */ - AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), - - /* NID 0x1F */ - AZALIA_PIN_CFG(0x0, 0x1F, 0x901701F0), - - /* NID 0x20 */ - AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), - - /* NID 0x22 */ - AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), - - /* NID 0x23: Internal mic boost volume. */ - AZALIA_PIN_CFG(0x0, 0x23, 0x90A601F0), - - 0x80862804, /* Codec Vendor / Device ID: Intel Ibexpeak HDMI. */ - 0x17aa21b5, /* Subsystem ID */ - 0x00000004, /* Number of 4 dword sets */ - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x17aa21b5 */ - AZALIA_SUBVENDOR(0x3, 0x17AA21B5), - - /* NID 0x04. */ - AZALIA_PIN_CFG(0x3, 0x04, 0x58560010), - - /* NID 0x05. */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560020), - - /* NID 0x06. */ - AZALIA_PIN_CFG(0x3, 0x06, 0x58560030), -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/x201/irq_tables.c b/src/mainboard/lenovo/x201/irq_tables.c deleted file mode 100644 index bf8574f..0000000 --- a/src/mainboard/lenovo/x201/irq_tables.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 16, - 0x00, (0x1f << 3) | 0x0, - 0x0000, - 0x8086, 0x3b07, - 0x00000000, - { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }, /* u8 rfu[11] */ - 0x20,/* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, { link, bitmap }, { link, bitmap }, { link, bitmap }, { link, bitmap }, slot, rfu */ - { 0x00, (0x00 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x01 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, - { 0x00, (0x02 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, - { 0x00, (0x16 << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x19 << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, - { 0x00, (0x1a << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1b << 3) | 0x0, { { 0x00, 0xdef8 }, { 0x02, 0x1cf8 }, { 0x00, 0xdef8 }, { 0x00, 0xdef8 }, }, 0x00, 0x00 }, - { 0x00, (0x1c << 3) | 0x0, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1c << 3) | 0x3, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1c << 3) | 0x4, { { 0x05, 0x1cf8 }, { 0x06, 0x1cf8 }, { 0x07, 0x1cf8 }, { 0x08, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1d << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1e << 3) | 0x0, { { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x03, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1f << 3) | 0x0, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1f << 3) | 0x2, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1f << 3) | 0x3, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - { 0x00, (0x1f << 3) | 0x6, { { 0x08, 0x1cf8 }, { 0x01, 0x1cf8 }, { 0x02, 0x1cf8 }, { 0x04, 0x1cf8 }, }, 0x00, 0x00 }, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lenovo/x201/mainboard.c b/src/mainboard/lenovo/x201/mainboard.c deleted file mode 100644 index 5b76be2..0000000 --- a/src/mainboard/lenovo/x201/mainboard.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <ec/lenovo/pmh7/pmh7.h> -#include <ec/acpi/ec.h> -#include <ec/lenovo/h8/h8.h> -#include <northbridge/intel/nehalem/nehalem.h> -#include <southbridge/intel/bd82x6x/pch.h> - -#include <pc80/mc146818rtc.h> -#include "dock.h" -#include <arch/x86/include/arch/acpigen.h> -#include <drivers/intel/gma/int15.h> -#include <arch/interrupt.h> -#include <pc80/keyboard.h> -#include <cpu/x86/lapic.h> -#include <device/pci.h> -#include <smbios.h> -#include <build.h> -#include "drivers/lenovo/lenovo.h" - -static acpi_cstate_t cst_entries[] = { - {1, 1, 1000, {0x7f, 1, 2, {0}, 1, 0}}, - {2, 1, 500, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV2, 0}}, - {2, 17, 250, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV3, 0}}, -}; - -int get_cst_entries(acpi_cstate_t ** entries) -{ - *entries = cst_entries; - return ARRAY_SIZE(cst_entries); -} - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - - - -static void mainboard_init(device_t dev) -{ - printk(BIOS_SPEW, "starting SPI configuration\n"); - - /* Configure SPI. */ - RCBA32(0x3800) = 0x07ff0500; - RCBA32(0x3804) = 0x3f046008; - RCBA32(0x3808) = 0x0058efc0; - RCBA32(0x384c) = 0x92000000; - RCBA32(0x3850) = 0x00000a0b; - RCBA32(0x3858) = 0x07ff0500; - RCBA32(0x385c) = 0x04ff0003; - RCBA32(0x3860) = 0x00020001; - RCBA32(0x3864) = 0x00000fff; - RCBA32(0x3874) = 0; - RCBA32(0x3890) = 0xf8400000; - RCBA32(0x3894) = 0x143b5006; - RCBA32(0x3898) = 0x05200302; - RCBA32(0x389c) = 0x0601209f; - RCBA32(0x38b0) = 0x00000004; - RCBA32(0x38b4) = 0x03040002; - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x38c0) = 0x00000007; - RCBA32(0x3804) = 0x3f04e008; - - printk(BIOS_SPEW, "SPI configured\n"); - /* This sneaked in here, because X201 SuperIO chip isn't really - connected to anything and hence we don't init it. - */ - pc_keyboard_init(); - - /* Enable expresscard hotplug events. */ - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0xd8, - pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) - | (1 << 30)); - pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0x42, 0x142); -} - -static void fill_ssdt(void) -{ - drivers_lenovo_serial_ports_ssdt_generate("\_SB.PCI0.LPCB", 0); -} - -static void mainboard_enable(device_t dev) -{ - device_t dev0; - u16 pmbase; - - dev->ops->init = mainboard_init; - dev->ops->acpi_fill_ssdt_generator = fill_ssdt; - - pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - outl(0, pmbase + SMI_EN); - - enable_lapic(); - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE, - DEFAULT_GPIOBASE | 1); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL, - 0x10); - - /* If we're resuming from suspend, blink suspend LED */ - dev0 = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) - ec_write(0x0c, 0xc7); - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_LFP, 2); - -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/x201/mptable.c b/src/mainboard/lenovo/x201/mptable.c deleted file mode 100644 index 84364a0..0000000 --- a/src/mainboard/lenovo/x201/mptable.c +++ /dev/null @@ -1,82 +0,0 @@ -/* generated by MPTable, version 2.0.15*/ -/* as modified by RGM for coreboot */ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -#define INTA 0x00 -#define INTB 0x01 -#define INTC 0x02 -#define INTD 0x03 - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, 0x2, 0x20, 0xfec00000); - - mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_ExtINT, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, - 0x2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x1, 0x2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x0, 0x2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x3, 0x2, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x4, 0x2, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x5, 0x2, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x6, 0x2, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x7, 0x2, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x8, 0x2, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0x9, 0x2, 0x9); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xa, 0x2, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xb, 0x2, 0xb); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xc, 0x2, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xd, 0x2, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xe, 0x2, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, - 0x3, 0xf, 0x2, 0xf); - /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_lintsrc(mc, mp_ExtINT, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, - MP_APIC_ALL, 0x0); - smp_write_lintsrc(mc, mp_NMI, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 0x3, 0x0, - MP_APIC_ALL, 0x1); - - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lenovo/x201/romstage.c b/src/mainboard/lenovo/x201/romstage.c deleted file mode 100644 index 2c3dfd1..0000000 --- a/src/mainboard/lenovo/x201/romstage.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <ec/acpi/ec.h> -#include <delay.h> -#include <timestamp.h> -#include <arch/acpi.h> -#include <cbmem.h> - -#include "gpio.h" -#include "dock.h" -#include "arch/early_variables.h" -#include "southbridge/intel/ibexpeak/pch.h" -#include "northbridge/intel/nehalem/nehalem.h" - -#include "northbridge/intel/nehalem/raminit.h" -#include "southbridge/intel/ibexpeak/me.h" - -static void pch_enable_lpc(void) -{ - /* X201 EC Decode Range Port60/64, Port62/66 */ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN | GAMEL_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); - pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); - pci_write_config32(PCH_LPC_DEV, LPC_GEN3_DEC, 0x1c1681); - pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, (0x68 & ~3) | 0x00040001); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xd0, 0x0); - pci_write_config32(PCH_LPC_DEV, 0xdc, 0x8); - - pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, - (pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) & ~2) | 1); - - pci_write_config32(PCH_LPC_DEV, ETR3, - pci_read_config32(PCH_LPC_DEV, ETR3) & ~ETR3_CF9GR); -} - -static void rcba_config(void) -{ - static const u32 rcba_dump3[] = { - /* 30fc */ 0x00000000, - /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, - /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, - /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, - /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, - /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, - /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, - /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, - /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, - /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3340 */ 0x000fffff, 0x00000000, 0x00000000, 0x00000000, - /* 3350 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3360 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3370 */ 0x00000000, 0x00000000, 0x7f8fdfff, 0x00000000, - /* 3380 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3390 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33a0 */ 0x00003900, 0x00000000, 0x00000000, 0x00000000, - /* 33b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33c0 */ 0x00010000, 0x00000000, 0x00000000, 0x0001004b, - /* 33d0 */ 0x06000008, 0x00010000, 0x00000000, 0x00000000, - /* 33e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3400 */ 0x0000001c, 0x00000080, 0x00000000, 0x00000000, - /* 3410 */ 0x00000c61, 0x00000000, 0x16e41fe1, 0xbf4f001f, - /* 3420 */ 0x00000000, 0x00060010, 0x0000001d, 0x00000000, - /* 3430 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3440 */ 0xdeaddeed, 0x00000000, 0x00000000, 0x00000000, - /* 3450 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3460 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3470 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3480 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3490 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3500 */ 0x20000557, 0x2000055f, 0x2000074b, 0x2000074b, - /* 3510 */ 0x20000557, 0x2000014b, 0x2000074b, 0x2000074b, - /* 3520 */ 0x2000074b, 0x2000074b, 0x2000055f, 0x2000055f, - /* 3530 */ 0x20000557, 0x2000055f, 0x00000000, 0x00000000, - /* 3540 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3550 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3560 */ 0x00000001, 0x000026a3, 0x00040002, 0x01000052, - /* 3570 */ 0x02000772, 0x16000f8f, 0x1800ff4f, 0x0001d630, - /* 3580 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3590 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35a0 */ 0xfc000201, 0x3c000201, 0x00000000, 0x00000000, - /* 35b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3600 */ 0x0a001f00, 0x00000000, 0x00000000, 0x00000001, - /* 3610 */ 0x00010000, 0x00000000, 0x00000000, 0x00000000, - /* 3600 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3610 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3620 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3630 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3640 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3650 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3660 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3670 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3680 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3690 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36b0 */ 0x00000000, 0x089c0018, 0x00000000, 0x00000000, - /* 36c0 */ 0x11111111, 0x00000000, 0x00000000, 0x00000000, - /* 36d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, - }; - unsigned i; - for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x30fc); - } -} - -static inline void write_acpi32(u32 addr, u32 val) -{ - outl(val, DEFAULT_PMBASE | addr); -} - -static inline void write_acpi16(u32 addr, u16 val) -{ - outw(val, DEFAULT_PMBASE | addr); -} - -static inline u32 read_acpi32(u32 addr) -{ - return inl(DEFAULT_PMBASE | addr); -} - -static inline u16 read_acpi16(u32 addr) -{ - return inw(DEFAULT_PMBASE | addr); -} - -static void set_fsb_frequency(void) -{ - u8 block[5]; - u16 fsbfreq = 62879; - smbus_block_read(0x69, 0, 5, block); - block[0] = fsbfreq; - block[1] = fsbfreq >> 8; - - smbus_block_write(0x69, 0, 5, block); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 reg32; - int s3resume = 0; - const u8 spd_addrmap[4] = { 0x50, 0, 0x51, 0 }; - - timestamp_init(rdtsc ()); - - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - nehalem_early_initialization(NEHALEM_MOBILE); - - pch_enable_lpc(); - - /* Enable USB Power. We need to do it early for usbdebug to work. */ - ec_set_bit(0x3b, 4); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - - setup_pch_gpios(&x201_gpio_map); - - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - u8 reg8; - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); - printk(BIOS_DEBUG, "a2: %02x\n", reg8); - if (!(reg8 & 0x20)) { - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "Bad resume from S3 detected.\n"); - } else { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - s3resume = 1; - } else { - printk(BIOS_DEBUG, - "Resume from S3 detected, but disabled.\n"); - } - } - } - - /* Enable SMBUS. */ - enable_smbus(); - - outb((inb(DEFAULT_GPIOBASE | 0x3a) & ~0x2) | 0x20, - DEFAULT_GPIOBASE | 0x3a); - outb(0x50, 0x15ec); - outb(inb(0x15ee) & 0x70, 0x15ee); - - write_acpi16(0x2, 0x0); - write_acpi32(0x28, 0x0); - write_acpi32(0x2c, 0x0); - if (!s3resume) { - read_acpi32(0x4); - read_acpi32(0x20); - read_acpi32(0x34); - write_acpi16(0x0, 0x900); - write_acpi32(0x20, 0xffff7ffe); - write_acpi32(0x34, 0x56974); - pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, - pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) | 2); - } - - early_thermal_init(); - - timestamp_add_now(TS_BEFORE_INITRAM); - - chipset_init(s3resume); - - set_fsb_frequency(); - - raminit(s3resume, spd_addrmap); - - timestamp_add_now(TS_AFTER_INITRAM); - - intel_early_me_status(); - - if (s3resume) { - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if (s3resume) { - void *resume_backup_memory; - - resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); - } else { - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); - quick_ram_check(); - } -#endif - - timestamp_add_now(TS_END_ROMSTAGE); -} diff --git a/src/mainboard/lenovo/x201/smi.h b/src/mainboard/lenovo/x201/smi.h deleted file mode 100644 index 38a3027..0000000 --- a/src/mainboard/lenovo/x201/smi.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_LENOVO_X60_SMI_H -#define MAINBOARD_LENOVO_X60_SMI_H - -#define SMI_DOCK_CONNECT 0x01 -#define SMI_DOCK_DISCONNECT 0x02 - -#endif diff --git a/src/mainboard/lenovo/x201/smihandler.c b/src/mainboard/lenovo/x201/smihandler.c deleted file mode 100644 index ad3911c..0000000 --- a/src/mainboard/lenovo/x201/smihandler.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/ibexpeak/nvs.h" -#include "southbridge/intel/ibexpeak/pch.h" -#include "southbridge/intel/ibexpeak/me.h" -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_2065x/model_2065x.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include "dock.h" -#include "smi.h" - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - case SMI_DOCK_CONNECT: - ec_clr_bit(0x03, 2); - udelay(250000); - dock_connect(); - ec_set_bit(0x03, 2); - /* set dock LED to indicate status */ - ec_write(0x0c, 0x09); - ec_write(0x0c, 0x88); - break; - - case SMI_DOCK_DISCONNECT: - ec_clr_bit(0x03, 2); - dock_disconnect(); - break; - - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, - (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch (event) { - case 0x14: - /* brightness up */ - mainboard_smi_brightness_up(); - break; - case 0x15: - /* brightness down */ - mainboard_smi_brightness_down(); - break; - case 0x18: - /* Fn-F9 key */ - case 0x27: - /* Power loss */ - case 0x50: - /* Undock Key */ - mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); - break; - case 0x37: - case 0x58: - /* Dock Event */ - mainboard_io_trap_handler(SMI_DOCK_CONNECT); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 1)) - mainboard_smi_handle_ec_sci(); -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_2065x_finalize_smm(); - - mainboard_finalized = 1; - break; - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, - pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - default: - break; - } - return 0; -} - -void mainboard_smi_sleep(u8 slp_typ) -{ - if (slp_typ == 3) { - u8 ec_wake = ec_read(0x32); - /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ - if (ec_wake & 0x14) { - u32 gpe_rout; - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* Enable EC WAKE GPE. */ - outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); - gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - /* Redirect EC WAKE GPE to SCI. */ - gpe_rout &= ~(3 << 26); - gpe_rout |= (2 << 26); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); - } - } -} diff --git a/src/mainboard/lenovo/x220/Kconfig b/src/mainboard/lenovo/x220/Kconfig deleted file mode 100644 index d92ea73..0000000 --- a/src/mainboard/lenovo/x220/Kconfig +++ /dev/null @@ -1,80 +0,0 @@ -if BOARD_LENOVO_X220 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE - select SOUTHBRIDGE_INTEL_C216 - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select INTEL_INT15 - select EARLY_CBMEM_INIT - select VGA - select INTEL_EDID - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select SANDYBRIDGE_LVDS - - # Workaround for EC/KBC IRQ1. - select SERIRQ_CONTINUOUS_MODE - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -config MAINBOARD_DIR - string - default lenovo/x220 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad X220" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 8 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 10 - -config VGA_BIOS_FILE - string - default "pci8086,0126.rom" - -config VGA_BIOS_ID - string - default "8086,0126" - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x17aa - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x21db - -endif # BOARD_LENOVO_X220 diff --git a/src/mainboard/lenovo/x220/Makefile.inc b/src/mainboard/lenovo/x220/Makefile.inc deleted file mode 100644 index 265059a..0000000 --- a/src/mainboard/lenovo/x220/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c -romstage-y += gpio.c diff --git a/src/mainboard/lenovo/x220/acpi/ec.asl b/src/mainboard/lenovo/x220/acpi/ec.asl deleted file mode 100644 index 4b3e72c..0000000 --- a/src/mainboard/lenovo/x220/acpi/ec.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> - -Scope(_SB.PCI0.LPCB.EC) -{ -} diff --git a/src/mainboard/lenovo/x220/acpi/gpe.asl b/src/mainboard/lenovo/x220/acpi/gpe.asl deleted file mode 100644 index 80bee71..0000000 --- a/src/mainboard/lenovo/x220/acpi/gpe.asl +++ /dev/null @@ -1,13 +0,0 @@ - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP04.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP04.HPCS) - If (_SB.PCI0.RP04.PDC) - { - Store (0x01, _SB.PCI0.RP04.PDC) - Notify (_SB.PCI0.RP04, 0x00) - } - } - } diff --git a/src/mainboard/lenovo/x220/acpi/platform.asl b/src/mainboard/lenovo/x220/acpi/platform.asl deleted file mode 100644 index 72b9dbf..0000000 --- a/src/mainboard/lenovo/x220/acpi/platform.asl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* ME may not be up yet. */ - Store (0, _TZ.MEB1) - Store (0, _TZ.MEB2) - - /* Not implemented. */ - Return(Package(){0,0}) -} diff --git a/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c695..0000000 --- a/src/mainboard/lenovo/x220/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/x220/acpi/superio.asl b/src/mainboard/lenovo/x220/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/lenovo/x220/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/x220/acpi_tables.c b/src/mainboard/lenovo/x220/acpi_tables.c deleted file mode 100644 index 26a459d..0000000 --- a/src/mainboard/lenovo/x220/acpi_tables.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> - -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Disable USB ports in S3 by default */ - gnvs->s3u0 = 0; - gnvs->s3u1 = 0; - - /* Disable USB ports in S5 by default */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - // the lid is open by default. - gnvs->lids = 1; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/x220/board_info.txt b/src/mainboard/lenovo/x220/board_info.txt deleted file mode 100644 index 689ca8f..0000000 --- a/src/mainboard/lenovo/x220/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default deleted file mode 100644 index ef3e920..0000000 --- a/src/mainboard/lenovo/x220/cmos.default +++ /dev/null @@ -1,17 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -touchpad=Enable -sata_mode=AHCI -fn_ctrl_swap=Disable -sticky_fn=Disable -trackpoint=Enable -hyper_threading=Enable diff --git a/src/mainboard/lenovo/x220/cmos.layout b/src/mainboard/lenovo/x220/cmos.layout deleted file mode 100644 index cf64f92..0000000 --- a/src/mainboard/lenovo/x220/cmos.layout +++ /dev/null @@ -1,167 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2014 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail - -# coreboot config options: EC -411 1 e 8 first_battery -412 1 e 1 bluetooth -413 1 e 1 wwan -414 1 e 1 touchpad -415 1 e 1 wlan -416 1 e 1 trackpoint -417 1 e 1 fn_ctrl_swap -418 1 e 1 sticky_fn -419 1 e 1 power_management_beeps -421 1 e 9 sata_mode -#422 2 r 1 unused - -# coreboot config options: cpu -424 1 e 2 hyper_threading -#425 7 r 0 unused - -# coreboot config options: northbridge -432 3 e 11 gfx_uma_size -#435 549 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 -960 16 r 0 mrc_scrambler_seed_chk - -# coreboot config options: check sums -984 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 Both -10 1 Keyboard only -10 2 Thinklight only -10 3 None -11 0 32M -11 1 64M -11 2 96M -11 3 128M -11 4 160M -11 5 192M -11 6 224M - -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/lenovo/x220/devicetree.cb b/src/mainboard/lenovo/x220/devicetree.cb deleted file mode 100644 index dc129c0..0000000 --- a/src/mainboard/lenovo/x220/devicetree.cb +++ /dev/null @@ -1,188 +0,0 @@ -chip northbridge/intel/sandybridge - - # Enable DisplayPort Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "5" - register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms - register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms - register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms - register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "0" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "4" - register "gpu_cpu_backlight" = "0x1155" - register "gpu_pch_backlight" = "0x06100610" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Coordinate with HW_ALL - register "pstate_coord_type" = "0xfe" - - register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on - subsystemid 0x17aa 0x21db - end # host bridge - device pci 01.0 off end # PCIe Bridge for discrete graphics - device pci 02.0 on - subsystemid 0x17aa 0x21db - end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "alt_gp_smi_en" = "0x0000" - register "gpi1_routing" = "2" - register "gpi8_routing" = "2" - - # Enable SATA ports 0 (HDD bay) & 1 (dock) & 2 (msata) - register "sata_port_map" = "0x7" - # Set max SATA speed to 6.0 Gb/s - register "sata_interface_speed_support" = "0x3" - - register "gen1_dec" = "0x7c1601" - register "gen2_dec" = "0x0c15e1" - register "gen4_dec" = "0x0c06a1" - - # Enable zero-based linear PCIe root port functions - register "pcie_port_coalesce" = "1" - - device pci 16.0 on - subsystemid 0x17aa 0x21db - end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on - subsystemid 0x17aa 0x21ce - end # Intel Gigabit Ethernet - device pci 1a.0 on - subsystemid 0x17aa 0x21db - end # USB2 EHCI #2 - device pci 1b.0 on - subsystemid 0x17aa 0x21db - end # High Definition Audio - device pci 1c.0 on - subsystemid 0x17aa 0x21db - end # PCIe Port #1 - device pci 1c.1 on - subsystemid 0x17aa 0x21db - end # PCIe Port #2 (wlan) - device pci 1c.2 on - subsystemid 0x17aa 0x21db - end # PCIe Port #3 - device pci 1c.3 on - subsystemid 0x17aa 0x21db - end # PCIe Port #4 - device pci 1c.4 on - subsystemid 0x17aa 0x21db - device pci 00.0 on - subsystemid 0x17aa 0x21db - end - device pci 00.1 on - subsystemid 0x17aa 0x21db - end - end # PCIe Port #5 (SD) - device pci 1c.5 off end # PCIe Port #6 - device pci 1c.6 off end # PCIe Port #7 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on - subsystemid 0x17aa 0x21db - end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on #LPC bridge - subsystemid 0x17aa 0x21db - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa6" - register "config1" = "0x01" - register "config2" = "0xa0" - register "config3" = "0x60" - - register "has_keyboard_backlight" = "0" - - register "beepmask0" = "0x00" - register "beepmask1" = "0x86" - register "has_power_management_beeps" = "1" - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xd0" - register "event5_enable" = "0xfc" - register "event6_enable" = "0x00" - register "event7_enable" = "0x81" - register "event8_enable" = "0x7b" - register "event9_enable" = "0xff" - register "eventa_enable" = "0x01" - register "eventb_enable" = "0xf0" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - register "evente_enable" = "0x0d" - end - end # LPC bridge - device pci 1f.2 on - subsystemid 0x17aa 0x21db - end # SATA Controller 1 - device pci 1f.3 on - subsystemid 0x17aa 0x21db - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 on - subsystemid 0x17aa 0x21db - end # Thermal - end - end -end diff --git a/src/mainboard/lenovo/x220/dsdt.asl b/src/mainboard/lenovo/x220/dsdt.asl deleted file mode 100644 index b6b4b33..0000000 --- a/src/mainboard/lenovo/x220/dsdt.asl +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP04_IS_EXPRESSCARD 1 -#define EC_LENOVO_H8_ME_WORKAROUND 1 -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/lenovo/x220/fadt.c b/src/mainboard/lenovo/x220/fadt.c deleted file mode 100644 index 27e6303..0000000 --- a/src/mainboard/lenovo/x220/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 101; /* c2 not supported */ - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/lenovo/x220/gpio.c b/src/mainboard/lenovo/x220/gpio.c deleted file mode 100644 index 83a0db3..0000000 --- a/src/mainboard/lenovo/x220/gpio.c +++ /dev/null @@ -1,380 +0,0 @@ -#include "southbridge/intel/bd82x6x/gpio.h" -static const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, - .gpio1 = GPIO_MODE_GPIO, - .gpio2 = GPIO_MODE_GPIO, - .gpio3 = GPIO_MODE_GPIO, - .gpio4 = GPIO_MODE_GPIO, - .gpio5 = GPIO_MODE_GPIO, - .gpio6 = GPIO_MODE_GPIO, - .gpio7 = GPIO_MODE_GPIO, - .gpio8 = GPIO_MODE_GPIO, - .gpio9 = GPIO_MODE_NATIVE, - .gpio10 = GPIO_MODE_GPIO, - .gpio11 = GPIO_MODE_NATIVE, - .gpio12 = GPIO_MODE_NATIVE, - .gpio13 = GPIO_MODE_GPIO, - .gpio14 = GPIO_MODE_NATIVE, - .gpio15 = GPIO_MODE_GPIO, - .gpio16 = GPIO_MODE_GPIO, - .gpio17 = GPIO_MODE_GPIO, - .gpio18 = GPIO_MODE_NATIVE, - .gpio19 = GPIO_MODE_NATIVE, - .gpio20 = GPIO_MODE_NATIVE, - .gpio21 = GPIO_MODE_GPIO, - .gpio22 = GPIO_MODE_GPIO, - .gpio23 = GPIO_MODE_NATIVE, - .gpio24 = GPIO_MODE_GPIO, - .gpio25 = GPIO_MODE_NATIVE, - .gpio26 = GPIO_MODE_NATIVE, - .gpio27 = GPIO_MODE_GPIO, - .gpio28 = GPIO_MODE_GPIO, - .gpio29 = GPIO_MODE_GPIO, - .gpio30 = GPIO_MODE_NATIVE, - .gpio31 = GPIO_MODE_NATIVE, -}; - -static const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_OUTPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_INPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_OUTPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_OUTPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_INPUT, - .gpio28 = GPIO_DIR_INPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT, -}; - -static const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_HIGH, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_LOW, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio6 = GPIO_LEVEL_HIGH, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_HIGH, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_LOW, - .gpio16 = GPIO_LEVEL_HIGH, - .gpio17 = GPIO_LEVEL_HIGH, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_HIGH, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_HIGH, - .gpio22 = GPIO_LEVEL_HIGH, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_LOW, -}; - -static const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio0 = GPIO_INVERT, - .gpio1 = GPIO_INVERT, - .gpio2 = GPIO_NO_INVERT, - .gpio3 = GPIO_NO_INVERT, - .gpio4 = GPIO_NO_INVERT, - .gpio5 = GPIO_NO_INVERT, - .gpio6 = GPIO_INVERT, - .gpio7 = GPIO_NO_INVERT, - .gpio8 = GPIO_NO_INVERT, - .gpio9 = GPIO_NO_INVERT, - .gpio10 = GPIO_NO_INVERT, - .gpio11 = GPIO_NO_INVERT, - .gpio12 = GPIO_NO_INVERT, - .gpio13 = GPIO_INVERT, - .gpio14 = GPIO_NO_INVERT, - .gpio15 = GPIO_NO_INVERT, - .gpio16 = GPIO_NO_INVERT, - .gpio17 = GPIO_NO_INVERT, - .gpio18 = GPIO_NO_INVERT, - .gpio19 = GPIO_NO_INVERT, - .gpio20 = GPIO_NO_INVERT, - .gpio21 = GPIO_NO_INVERT, - .gpio22 = GPIO_NO_INVERT, - .gpio23 = GPIO_NO_INVERT, - .gpio24 = GPIO_NO_INVERT, - .gpio25 = GPIO_NO_INVERT, - .gpio26 = GPIO_NO_INVERT, - .gpio27 = GPIO_NO_INVERT, - .gpio28 = GPIO_NO_INVERT, - .gpio29 = GPIO_NO_INVERT, - .gpio30 = GPIO_NO_INVERT, - .gpio31 = GPIO_NO_INVERT, -}; - -static const struct pch_gpio_set1 pch_gpio_set1_blink = { - .gpio0 = GPIO_NO_BLINK, - .gpio1 = GPIO_NO_BLINK, - .gpio2 = GPIO_NO_BLINK, - .gpio3 = GPIO_NO_BLINK, - .gpio4 = GPIO_NO_BLINK, - .gpio5 = GPIO_NO_BLINK, - .gpio6 = GPIO_NO_BLINK, - .gpio7 = GPIO_NO_BLINK, - .gpio8 = GPIO_NO_BLINK, - .gpio9 = GPIO_NO_BLINK, - .gpio10 = GPIO_NO_BLINK, - .gpio11 = GPIO_NO_BLINK, - .gpio12 = GPIO_NO_BLINK, - .gpio13 = GPIO_NO_BLINK, - .gpio14 = GPIO_NO_BLINK, - .gpio15 = GPIO_NO_BLINK, - .gpio16 = GPIO_NO_BLINK, - .gpio17 = GPIO_NO_BLINK, - .gpio18 = GPIO_NO_BLINK, - .gpio19 = GPIO_NO_BLINK, - .gpio20 = GPIO_NO_BLINK, - .gpio21 = GPIO_NO_BLINK, - .gpio22 = GPIO_NO_BLINK, - .gpio23 = GPIO_NO_BLINK, - .gpio24 = GPIO_NO_BLINK, - .gpio25 = GPIO_NO_BLINK, - .gpio26 = GPIO_NO_BLINK, - .gpio27 = GPIO_NO_BLINK, - .gpio28 = GPIO_NO_BLINK, - .gpio29 = GPIO_NO_BLINK, - .gpio30 = GPIO_NO_BLINK, - .gpio31 = GPIO_NO_BLINK, -}; - -static const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, - .gpio33 = GPIO_MODE_GPIO, - .gpio34 = GPIO_MODE_GPIO, - .gpio35 = GPIO_MODE_GPIO, - .gpio36 = GPIO_MODE_GPIO, - .gpio37 = GPIO_MODE_GPIO, - .gpio38 = GPIO_MODE_GPIO, - .gpio39 = GPIO_MODE_GPIO, - .gpio40 = GPIO_MODE_NATIVE, - .gpio41 = GPIO_MODE_NATIVE, - .gpio42 = GPIO_MODE_GPIO, - .gpio43 = GPIO_MODE_NATIVE, - .gpio44 = GPIO_MODE_NATIVE, - .gpio45 = GPIO_MODE_NATIVE, - .gpio46 = GPIO_MODE_NATIVE, - .gpio47 = GPIO_MODE_NATIVE, - .gpio48 = GPIO_MODE_GPIO, - .gpio49 = GPIO_MODE_GPIO, - .gpio50 = GPIO_MODE_GPIO, - .gpio51 = GPIO_MODE_GPIO, - .gpio52 = GPIO_MODE_GPIO, - .gpio53 = GPIO_MODE_GPIO, - .gpio54 = GPIO_MODE_GPIO, - .gpio55 = GPIO_MODE_GPIO, - .gpio56 = GPIO_MODE_NATIVE, - .gpio57 = GPIO_MODE_GPIO, - .gpio58 = GPIO_MODE_NATIVE, - .gpio59 = GPIO_MODE_NATIVE, - .gpio60 = GPIO_MODE_NATIVE, - .gpio61 = GPIO_MODE_NATIVE, - .gpio62 = GPIO_MODE_NATIVE, - .gpio63 = GPIO_MODE_NATIVE, -}; - -static const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_INPUT, - .gpio35 = GPIO_DIR_OUTPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_INPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_INPUT, - .gpio42 = GPIO_DIR_OUTPUT, - .gpio43 = GPIO_DIR_INPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_INPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_INPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_INPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_INPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -static const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_HIGH, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_LOW, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_LOW, - .gpio39 = GPIO_LEVEL_HIGH, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_HIGH, - .gpio48 = GPIO_LEVEL_LOW, - .gpio49 = GPIO_LEVEL_LOW, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_LOW, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_HIGH, - .gpio55 = GPIO_LEVEL_HIGH, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_LOW, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_LOW, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -static const struct pch_gpio_set2 pch_gpio_set2_blink = { - .gpio32 = GPIO_NO_BLINK, - .gpio33 = GPIO_NO_BLINK, - .gpio34 = GPIO_NO_BLINK, - .gpio35 = GPIO_NO_BLINK, - .gpio36 = GPIO_NO_BLINK, - .gpio37 = GPIO_NO_BLINK, - .gpio38 = GPIO_NO_BLINK, - .gpio39 = GPIO_NO_BLINK, - .gpio40 = GPIO_NO_BLINK, - .gpio41 = GPIO_NO_BLINK, - .gpio42 = GPIO_NO_BLINK, - .gpio43 = GPIO_NO_BLINK, - .gpio44 = GPIO_NO_BLINK, - .gpio45 = GPIO_NO_BLINK, - .gpio46 = GPIO_NO_BLINK, - .gpio47 = GPIO_NO_BLINK, - .gpio48 = GPIO_NO_BLINK, - .gpio49 = GPIO_NO_BLINK, - .gpio50 = GPIO_NO_BLINK, - .gpio51 = GPIO_NO_BLINK, - .gpio52 = GPIO_NO_BLINK, - .gpio53 = GPIO_NO_BLINK, - .gpio54 = GPIO_NO_BLINK, - .gpio55 = GPIO_NO_BLINK, - .gpio56 = GPIO_NO_BLINK, - .gpio57 = GPIO_NO_BLINK, - .gpio58 = GPIO_NO_BLINK, - .gpio59 = GPIO_NO_BLINK, - .gpio60 = GPIO_NO_BLINK, - .gpio61 = GPIO_NO_BLINK, - .gpio62 = GPIO_NO_BLINK, - .gpio63 = GPIO_NO_BLINK, -}; - -static const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, - .gpio65 = GPIO_MODE_NATIVE, - .gpio66 = GPIO_MODE_NATIVE, - .gpio67 = GPIO_MODE_NATIVE, - .gpio68 = GPIO_MODE_GPIO, - .gpio69 = GPIO_MODE_GPIO, - .gpio70 = GPIO_MODE_GPIO, - .gpio71 = GPIO_MODE_GPIO, - .gpio72 = GPIO_MODE_NATIVE, - .gpio73 = GPIO_MODE_NATIVE, - .gpio74 = GPIO_MODE_NATIVE, - .gpio75 = GPIO_MODE_NATIVE, -}; - -static const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - .gpio65 = GPIO_DIR_OUTPUT, - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_OUTPUT, - .gpio68 = GPIO_DIR_INPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -static const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_HIGH, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_LOW, - .gpio69 = GPIO_LEVEL_LOW, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_HIGH, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .blink = &pch_gpio_set1_blink, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; diff --git a/src/mainboard/lenovo/x220/hda_verb.c b/src/mainboard/lenovo/x220/hda_verb.c deleted file mode 100644 index 6495fd6..0000000 --- a/src/mainboard/lenovo/x220/hda_verb.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Vendor Name : Conexant - * Vendor ID : 0x14f1506e - * Subsystem ID : 0x17aa21db - * Revision ID : 0x100002 - */ - - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x14f1506e, // Codec Vendor / Device ID: Conexant CX20590 - 0x17aa21db, // Subsystem ID - 0x0000000d , // Number of 4 dword sets - -/* Bits 31:28 - Codec Address */ -/* Bits 27:20 - NID */ -/* Bits 19:8 - Verb ID */ -/* Bits 7:0 - Payload */ - -/* NID 0x01 - NodeInfo */ - AZALIA_SUBVENDOR(0x0, 0x17AA21DB), - - AZALIA_PIN_CFG(0x0, 0x19, 0x04211040), - AZALIA_PIN_CFG(0x0, 0x1A, 0x61A19050), - AZALIA_PIN_CFG(0x0, 0x1B, 0x04A11060), - AZALIA_PIN_CFG(0x0, 0x1C, 0x6121401F), - AZALIA_PIN_CFG(0x0, 0x1D, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x1E, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x1F, 0x90170110), - AZALIA_PIN_CFG(0x0, 0x20, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x22, 0x40F001F0), - AZALIA_PIN_CFG(0x0, 0x23, 0x90A60170), - - /* Misc entries */ - 0x00B707C0, /* Enable PortB as Output with HP amp */ - 0x00D70740, /* Enable PortD as Output */ - 0x0017A200, /* Disable ClkEn of PortSenseTst */ - 0x0017C621, /* Slave Port - Port A used as microphone input for - combo Jack - Master Port - Port B used for Jack Presence Detect - Enable Combo Jack Detection */ - 0x0017A208, /* Enable ClkEn of PortSenseTst */ - 0x00170500, /* Set power state to D0 */ - 0x00170500, /* Padding */ - 0x00170500, /* Padding */ - - /* --- Next Codec --- */ - -/* Vendor Name : Intel - * Vendor ID : 0x80862806 - * Subsystem ID : 0x80860101 - * Revision ID : 0x100000 - */ - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel PantherPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of IDs - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x3, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[] = { - 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ -}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/x220/mainboard.c b/src/mainboard/lenovo/x220/mainboard.c deleted file mode 100644 index 00e7991..0000000 --- a/src/mainboard/lenovo/x220/mainboard.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011-2012 Google Inc. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <arch/acpi.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <smbios.h> -#include <device/pci.h> -#include <pc80/keyboard.h> -#include <ec/lenovo/h8/h8.h> -#include <build.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - -static void mainboard_init(device_t dev) -{ - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x38c0) = 0x00000007; - - /* This sneaked in here, because X201 SuperIO chip isn't really - connected to anything and hence we don't init it. - */ - pc_keyboard_init(); - - /* Enable expresscard hotplug events. */ - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0xd8, - pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), 0xd8) - | (1 << 30)); - pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 3)), - 0x42, 0x142); -} - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -void h8_mainboard_init_dock (void) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/x220/romstage.c b/src/mainboard/lenovo/x220/romstage.c deleted file mode 100644 index ba48fac..0000000 --- a/src/mainboard/lenovo/x220/romstage.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/byteorder.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <arch/acpi.h> -#include <console/console.h> -#include "northbridge/intel/sandybridge/sandybridge.h" -#include "northbridge/intel/sandybridge/raminit_native.h" -#include "southbridge/intel/bd82x6x/pch.h" -#include "southbridge/intel/bd82x6x/gpio.h" -#include <arch/cpu.h> -#include <cpu/x86/msr.h> - -void pch_enable_lpc(void) -{ - /* X230 EC Decode Range Port60/64, Port62/66 */ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); - pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); - pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xac, - 0x80010000); -} - -void rcba_config(void) -{ - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - RCBA32(FD) = 0x1fe41fe3; - RCBA32(BUC) = 0; -} - -const struct southbridge_usb_port mainboard_usb_ports[] = { - { 1, 0, 0 }, - { 1, 1, 1 }, - { 1, 1, 3 }, - { 1, 1, 3 }, - { 1, 1, -1 }, - { 1, 1, -1 }, - { 1, 0, 2 }, - { 1, 0, 2 }, - { 1, 1, 6 }, - { 1, 1, 5 }, - { 1, 1, 6 }, - { 1, 1, 6 }, - { 1, 1, 7 }, - { 1, 1, 6 }, -}; - -void mainboard_get_spd(spd_raw_data *spd) { - read_spd (&spd[0], 0x50); - read_spd (&spd[2], 0x51); -} diff --git a/src/mainboard/lenovo/x220/smihandler.c b/src/mainboard/lenovo/x220/smihandler.c deleted file mode 100644 index 5bcde1c..0000000 --- a/src/mainboard/lenovo/x220/smihandler.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, - (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch (event) { - case 0x14: - /* brightness up */ - mainboard_smi_brightness_up(); - break; - case 0x15: - /* brightness down */ - mainboard_smi_brightness_down(); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, - pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - - default: - break; - } - return 0; -} - -void mainboard_smi_sleep(u8 slp_typ) -{ - if (slp_typ == 3) { - u8 ec_wake = ec_read(0x32); - /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ - if (ec_wake & 0x14) { - u32 gpe_rout; - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* Enable EC WAKE GPE. */ - outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); - gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - /* Redirect EC WAKE GPE to SCI. */ - gpe_rout &= ~(3 << 26); - gpe_rout |= (2 << 26); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); - } - } -} diff --git a/src/mainboard/lenovo/x220/thermal.h b/src/mainboard/lenovo/x220/thermal.h deleted file mode 100644 index ab24bb1..0000000 --- a/src/mainboard/lenovo/x220/thermal.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef X230_THERMAL_H -#define X230_THERMAL_H - - /* Temperature which OS will shutdown at */ - #define CRITICAL_TEMPERATURE 100 - - /* Temperature which OS will throttle CPU */ - #define PASSIVE_TEMPERATURE 90 - -#endif diff --git a/src/mainboard/lenovo/x230/Kconfig b/src/mainboard/lenovo/x230/Kconfig deleted file mode 100644 index a72a10a..0000000 --- a/src/mainboard/lenovo/x230/Kconfig +++ /dev/null @@ -1,76 +0,0 @@ -if BOARD_LENOVO_X230 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_IVYBRIDGE_NATIVE - select SOUTHBRIDGE_INTEL_C216 - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select BOARD_ROMSIZE_KB_12288 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select HAVE_ACPI_RESUME - select HAVE_SMI_HANDLER - select INTEL_INT15 - select EARLY_CBMEM_INIT - select VGA - select INTEL_EDID - select MAINBOARD_HAS_NATIVE_VGA_INIT - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - select IVYBRIDGE_LVDS - - # Workaround for EC/KBC IRQ1. - select SERIRQ_CONTINUOUS_MODE - -config HAVE_IFD_BIN - bool - default n - -config HAVE_ME_BIN - bool - default n - -config MAINBOARD_DIR - string - default lenovo/x230 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad X230" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 8 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 10 - -config VGA_BIOS_FILE - string - default "pci8086,0106.rom" - -config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID - hex - default 0x17aa - -config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID - hex - default 0x21fa - -endif # BOARD_LENOVO_X230 diff --git a/src/mainboard/lenovo/x230/Makefile.inc b/src/mainboard/lenovo/x230/Makefile.inc deleted file mode 100644 index 265059a..0000000 --- a/src/mainboard/lenovo/x230/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c -romstage-y += gpio.c diff --git a/src/mainboard/lenovo/x230/acpi/ec.asl b/src/mainboard/lenovo/x230/acpi/ec.asl deleted file mode 100644 index 4b3e72c..0000000 --- a/src/mainboard/lenovo/x230/acpi/ec.asl +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> - -Scope(_SB.PCI0.LPCB.EC) -{ -} diff --git a/src/mainboard/lenovo/x230/acpi/gpe.asl b/src/mainboard/lenovo/x230/acpi/gpe.asl deleted file mode 100644 index eb489d5..0000000 --- a/src/mainboard/lenovo/x230/acpi/gpe.asl +++ /dev/null @@ -1,13 +0,0 @@ - Method (_L01, 0, NotSerialized) - { - If (_SB.PCI0.RP03.HPCS) - { - Sleep (100) - Store (0x01, _SB.PCI0.RP03.HPCS) - If (_SB.PCI0.RP03.PDC) - { - Store (0x01, _SB.PCI0.RP03.PDC) - Notify (_SB.PCI0.RP03, 0x00) - } - } - } diff --git a/src/mainboard/lenovo/x230/acpi/platform.asl b/src/mainboard/lenovo/x230/acpi/platform.asl deleted file mode 100644 index 72b9dbf..0000000 --- a/src/mainboard/lenovo/x230/acpi/platform.asl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* ME may not be up yet. */ - Store (0, _TZ.MEB1) - Store (0, _TZ.MEB2) - - /* Not implemented. */ - Return(Package(){0,0}) -} diff --git a/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl b/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl deleted file mode 100644 index 6c1c695..0000000 --- a/src/mainboard/lenovo/x230/acpi/sandybridge_pci_irqs.asl +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 },// GFX INTA -> PIRQA (MSI) - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 16 },// D27IP_ZIP HDA INTA -> PIRQA (MSI) - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 17 },// D28IP_P1IP WLAN INTA -> PIRQB - Package() { 0x001cffff, 1, 0, 21 },// D28IP_P2IP ETH0 INTB -> PIRQF - Package() { 0x001cffff, 2, 0, 19 },// D28IP_P3IP SDCARD INTC -> PIRQD - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 19 },// D29IP_E1P EHCI1 INTA -> PIRQD - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 },// D26IP_E2P EHCI2 INTA -> PIRQF - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 17 }, // D31IP_SIP SATA INTA -> PIRQB (MSI) - Package() { 0x001fffff, 1, 0, 23 }, // D31IP_SMIP SMBUS INTB -> PIRQH - Package() { 0x001fffff, 2, 0, 16 }, // D31IP_TTIP THRT INTC -> PIRQA - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKD, 0 }, - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKF, 0 }, - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKH, 0 }, - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/lenovo/x230/acpi/superio.asl b/src/mainboard/lenovo/x230/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/lenovo/x230/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/lenovo/x230/acpi_tables.c b/src/mainboard/lenovo/x230/acpi_tables.c deleted file mode 100644 index 26a459d..0000000 --- a/src/mainboard/lenovo/x230/acpi_tables.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <cbmem.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/cpu.h> -#include <cpu/x86/msr.h> - -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include "thermal.h" - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - /* Disable USB ports in S3 by default */ - gnvs->s3u0 = 0; - gnvs->s3u1 = 0; - - /* Disable USB ports in S5 by default */ - gnvs->s5u0 = 0; - gnvs->s5u1 = 0; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; - - // the lid is open by default. - gnvs->lids = 1; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/x230/board_info.txt b/src/mainboard/lenovo/x230/board_info.txt deleted file mode 100644 index 689ca8f..0000000 --- a/src/mainboard/lenovo/x230/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default deleted file mode 100644 index 137f482..0000000 --- a/src/mainboard/lenovo/x230/cmos.default +++ /dev/null @@ -1,18 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -volume=0x3 -first_battery=Primary -bluetooth=Enable -wwan=Enable -wlan=Enable -touchpad=Enable -sata_mode=AHCI -fn_ctrl_swap=Disable -sticky_fn=Disable -trackpoint=Enable -hyper_threading=Enable -backlight=Both \ No newline at end of file diff --git a/src/mainboard/lenovo/x230/cmos.layout b/src/mainboard/lenovo/x230/cmos.layout deleted file mode 100644 index 7a2eb01..0000000 --- a/src/mainboard/lenovo/x230/cmos.layout +++ /dev/null @@ -1,167 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2014 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -400 8 h 0 volume - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail - -# coreboot config options: EC -411 1 e 8 first_battery -412 1 e 1 bluetooth -413 1 e 1 wwan -414 1 e 1 touchpad -415 1 e 1 wlan -416 1 e 1 trackpoint -417 1 e 1 fn_ctrl_swap -418 1 e 1 sticky_fn -#419 2 r 0 unused -421 1 e 9 sata_mode -422 2 e 10 backlight - -# coreboot config options: cpu -424 1 e 2 hyper_threading -#425 7 r 0 unused - -# coreboot config options: northbridge -432 3 e 11 gfx_uma_size -#435 549 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 -960 16 r 0 mrc_scrambler_seed_chk - -# coreboot config options: check sums -984 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 Both -10 1 Keyboard only -10 2 Thinklight only -10 3 None -11 0 32M -11 1 64M -11 2 96M -11 3 128M -11 4 160M -11 5 192M -11 6 224M - -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/lenovo/x230/devicetree.cb b/src/mainboard/lenovo/x230/devicetree.cb deleted file mode 100644 index 1886ba9..0000000 --- a/src/mainboard/lenovo/x230/devicetree.cb +++ /dev/null @@ -1,187 +0,0 @@ -chip northbridge/intel/sandybridge - - # Enable DisplayPort Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms - register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms - register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms - register "gpu_panel_power_backlight_on_delay" = "2100" # T3: 210ms - register "gpu_panel_power_backlight_off_delay" = "2100" # T4: 210ms - register "gfx.use_spread_spectrum_clock" = "1" - register "gfx.lvds_dual_channel" = "0" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "1" - register "gpu_cpu_backlight" = "0x1155" - register "gpu_pch_backlight" = "0x11551155" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - # Coordinate with HW_ALL - register "pstate_coord_type" = "0xfe" - - register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1) - register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on - subsystemid 0x17aa 0x21fa - end # host bridge - device pci 01.0 off end # PCIe Bridge for discrete graphics - device pci 02.0 on - subsystemid 0x17aa 0x21fa - end # vga controller - - chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "alt_gp_smi_en" = "0x0000" - register "gpi1_routing" = "2" - register "gpi8_routing" = "2" - - # Enable SATA ports 0 (HDD bay) & 1 (dock) & 2 (msata) - register "sata_port_map" = "0x7" - # Set max SATA speed to 6.0 Gb/s - register "sata_interface_speed_support" = "0x3" - - register "gen1_dec" = "0x7c1601" - register "gen2_dec" = "0x0c15e1" - register "gen4_dec" = "0x0c06a1" - - # Enable zero-based linear PCIe root port functions - register "pcie_port_coalesce" = "1" - - device pci 14.0 on - subsystemid 0x17aa 0x21fa - end # USB 3.0 Controller - device pci 16.0 on - subsystemid 0x17aa 0x21fa - end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on - subsystemid 0x17aa 0x21f3 - end # Intel Gigabit Ethernet - device pci 1a.0 on - subsystemid 0x17aa 0x21fa - end # USB2 EHCI #2 - device pci 1b.0 on - subsystemid 0x17aa 0x21fa - end # High Definition Audio - device pci 1c.0 on - subsystemid 0x17aa 0x21fa - device pci 00.0 on - subsystemid 0x17aa 0x21fa - end - device pci 00.1 on - subsystemid 0x17aa 0x21fa - end - end # PCIe Port #1 - device pci 1c.1 on - subsystemid 0x17aa 0x21fa - end # PCIe Port #2 - device pci 1c.2 on - subsystemid 0x17aa 0x21fa - end # PCIe Port #3 (expresscard) - device pci 1c.3 off end # PCIe Port #4 - device pci 1c.4 off end # PCIe Port #5 - device pci 1c.5 off end # PCIe Port #6 - device pci 1c.6 off end # PCIe Port #7 - device pci 1c.7 off end # PCIe Port #8 - device pci 1d.0 on - subsystemid 0x17aa 0x21fa - end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on #LPC bridge - subsystemid 0x17aa 0x21fa - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa6" - register "config1" = "0x09" - register "config2" = "0xa0" - register "config3" = "0xe0" - - register "has_keyboard_backlight" = "1" - - register "beepmask0" = "0x00" - register "beepmask1" = "0x86" - register "has_power_management_beeps" = "0" - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xd0" - register "event5_enable" = "0xfc" - register "event6_enable" = "0x00" - register "event7_enable" = "0x01" - register "event8_enable" = "0x7b" - register "event9_enable" = "0xff" - register "eventa_enable" = "0x01" - register "eventb_enable" = "0x00" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - register "evente_enable" = "0x0d" - end - end # LPC bridge - device pci 1f.2 on - subsystemid 0x17aa 0x21fa - end # SATA Controller 1 - device pci 1f.3 on - subsystemid 0x17aa 0x21fa - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end # SMBus - device pci 1f.5 off end # SATA Controller 2 - device pci 1f.6 on - subsystemid 0x17aa 0x21fa - end # Thermal - end - end -end diff --git a/src/mainboard/lenovo/x230/dsdt.asl b/src/mainboard/lenovo/x230/dsdt.asl deleted file mode 100644 index c73f795..0000000 --- a/src/mainboard/lenovo/x230/dsdt.asl +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 17 -#define BRIGHTNESS_UP _SB.PCI0.GFX0.LCD0.INCB -#define BRIGHTNESS_DOWN _SB.PCI0.GFX0.LCD0.DECB -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 -#define RP03_IS_EXPRESSCARD 1 -#define EC_LENOVO_H8_ME_WORKAROUND 1 -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/sandybridge/acpi/sandybridge.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl> -} diff --git a/src/mainboard/lenovo/x230/fadt.c b/src/mainboard/lenovo/x230/fadt.c deleted file mode 100644 index 27e6303..0000000 --- a/src/mainboard/lenovo/x230/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), - 0x40) & 0xfffe; - - memset((void *) fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, "CORE", 4); - header->asl_compiler_revision = 1; - - fadt->firmware_ctrl = (unsigned long) facs; - fadt->dsdt = (unsigned long) dsdt; - fadt->model = 1; - fadt->preferred_pm_profile = PM_MOBILE; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 101; /* c2 not supported */ - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = - acpi_checksum((void *) fadt, header->length); -} diff --git a/src/mainboard/lenovo/x230/gpio.c b/src/mainboard/lenovo/x230/gpio.c deleted file mode 100644 index cacc90f..0000000 --- a/src/mainboard/lenovo/x230/gpio.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef X230_GPIO_H -#define X230_GPIO_H - -#include "southbridge/intel/bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, - .gpio1 = GPIO_MODE_GPIO, - .gpio2 = GPIO_MODE_GPIO, - .gpio3 = GPIO_MODE_GPIO, - .gpio4 = GPIO_MODE_GPIO, - .gpio5 = GPIO_MODE_GPIO, - .gpio6 = GPIO_MODE_GPIO, - .gpio7 = GPIO_MODE_GPIO, - .gpio8 = GPIO_MODE_GPIO, - .gpio9 = GPIO_MODE_NATIVE, - .gpio10 = GPIO_MODE_GPIO, - .gpio11 = GPIO_MODE_NATIVE, - .gpio12 = GPIO_MODE_NATIVE, - .gpio13 = GPIO_MODE_GPIO, - .gpio14 = GPIO_MODE_NATIVE, - .gpio15 = GPIO_MODE_GPIO, - .gpio16 = GPIO_MODE_NATIVE, - .gpio17 = GPIO_MODE_GPIO, - .gpio18 = GPIO_MODE_NATIVE, - .gpio19 = GPIO_MODE_NATIVE, - .gpio20 = GPIO_MODE_NATIVE, - .gpio21 = GPIO_MODE_GPIO, - .gpio22 = GPIO_MODE_GPIO, - .gpio23 = GPIO_MODE_NATIVE, - .gpio24 = GPIO_MODE_GPIO, - .gpio25 = GPIO_MODE_NATIVE, - .gpio26 = GPIO_MODE_NATIVE, - .gpio27 = GPIO_MODE_GPIO, - .gpio28 = GPIO_MODE_GPIO, - .gpio29 = GPIO_MODE_GPIO, - .gpio30 = GPIO_MODE_NATIVE, - .gpio31 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_OUTPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_INPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_OUTPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_OUTPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_INPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_HIGH, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_LOW, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_HIGH, - .gpio5 = GPIO_LEVEL_HIGH, - .gpio6 = GPIO_LEVEL_HIGH, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_LOW, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_HIGH, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_LOW, - .gpio16 = GPIO_LEVEL_HIGH, - .gpio17 = GPIO_LEVEL_HIGH, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_HIGH, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_HIGH, - .gpio22 = GPIO_LEVEL_HIGH, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_LOW, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio1 = GPIO_INVERT, - .gpio6 = GPIO_INVERT, - .gpio13 = GPIO_INVERT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, - .gpio33 = GPIO_MODE_GPIO, - .gpio34 = GPIO_MODE_GPIO, - .gpio35 = GPIO_MODE_GPIO, - .gpio36 = GPIO_MODE_GPIO, - .gpio37 = GPIO_MODE_GPIO, - .gpio38 = GPIO_MODE_GPIO, - .gpio39 = GPIO_MODE_GPIO, - .gpio40 = GPIO_MODE_NATIVE, - .gpio41 = GPIO_MODE_NATIVE, - .gpio42 = GPIO_MODE_NATIVE, - .gpio43 = GPIO_MODE_GPIO, - .gpio44 = GPIO_MODE_NATIVE, - .gpio45 = GPIO_MODE_NATIVE, - .gpio46 = GPIO_MODE_NATIVE, - .gpio47 = GPIO_MODE_NATIVE, - .gpio48 = GPIO_MODE_GPIO, - .gpio49 = GPIO_MODE_GPIO, - .gpio50 = GPIO_MODE_GPIO, - .gpio51 = GPIO_MODE_GPIO, - .gpio52 = GPIO_MODE_GPIO, - .gpio53 = GPIO_MODE_GPIO, - .gpio54 = GPIO_MODE_GPIO, - .gpio55 = GPIO_MODE_GPIO, - .gpio56 = GPIO_MODE_NATIVE, - .gpio57 = GPIO_MODE_GPIO, - .gpio58 = GPIO_MODE_NATIVE, - .gpio59 = GPIO_MODE_NATIVE, - .gpio60 = GPIO_MODE_NATIVE, - .gpio61 = GPIO_MODE_NATIVE, - .gpio62 = GPIO_MODE_NATIVE, - .gpio63 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_INPUT, - .gpio34 = GPIO_DIR_OUTPUT, - .gpio35 = GPIO_DIR_INPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_INPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_INPUT, - .gpio42 = GPIO_DIR_INPUT, - .gpio43 = GPIO_DIR_OUTPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_INPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_INPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_INPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_INPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_LOW, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_LOW, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_LOW, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_HIGH, - .gpio48 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_HIGH, - .gpio55 = GPIO_LEVEL_HIGH, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_HIGH, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_LOW, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_GPIO, - .gpio65 = GPIO_MODE_GPIO, - .gpio66 = GPIO_MODE_GPIO, - .gpio67 = GPIO_MODE_GPIO, - .gpio68 = GPIO_MODE_GPIO, - .gpio69 = GPIO_MODE_GPIO, - .gpio70 = GPIO_MODE_GPIO, - .gpio71 = GPIO_MODE_GPIO, - .gpio72 = GPIO_MODE_NATIVE, - .gpio73 = GPIO_MODE_NATIVE, - .gpio74 = GPIO_MODE_NATIVE, - .gpio75 = GPIO_MODE_NATIVE, -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_INPUT, - .gpio65 = GPIO_DIR_INPUT, - .gpio66 = GPIO_DIR_INPUT, - .gpio67 = GPIO_DIR_INPUT, - .gpio68 = GPIO_DIR_INPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_HIGH, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_LOW, - .gpio69 = GPIO_LEVEL_LOW, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_HIGH, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map mainboard_gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; -#endif diff --git a/src/mainboard/lenovo/x230/hda_verb.c b/src/mainboard/lenovo/x230/hda_verb.c deleted file mode 100644 index bd176c1..0000000 --- a/src/mainboard/lenovo/x230/hda_verb.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Vendor Name : IDT - * Vendor ID : 0x10ec0269 - * Subsystem ID : 0x17aa21fa - * Revision ID : 0x100303 - */ - - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269VC - 0x17aa21fa, // Subsystem ID - 0x00000012, // Number of 4 dword sets - -/* Bits 31:28 - Codec Address */ -/* Bits 27:20 - NID */ -/* Bits 19:8 - Verb ID */ -/* Bits 7:0 - Payload */ - -/* NID 0x01 - NodeInfo */ - AZALIA_SUBVENDOR(0x0, 0x17AA21FA), - -/* NID 0x0A - External Microphone Connector - * Config=0x04A11020 (External,Right; MicIn,3.5mm; Black,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0A, 0x04A11020), - -/* NID 0x0B - Headphone Connector - * Config=0x0421101F (External,Right; HP,3.5mm; Black,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0B, 0x0421101F), - -/* NID 0x0C - Not connected - * Config=0x40F000F0 (N/A,N/A; Other,Unknown; Unknown,JD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0C, 0x40F000F0), - -/* NID 0x0D - Internal Speakers - * Config=0x90170110 (Fixed,Int; Speaker,Other Analog; Unknown,nJD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x0D, 0x90170110), - -/* NID 0x0F - Not connected - * Config=0x40F000F0 - */ - AZALIA_PIN_CFG(0x0, 0x0F, 0x40F000F0), - -/* NID 0x11 - Internal Microphone - * Config=0xD5A30140 (Fixed internal,Top; Mic In,ATIPI; Unknown,nJD; DA,Seq) - */ - AZALIA_PIN_CFG(0x0, 0x11, 0xD5A30140), - AZALIA_PIN_CFG(0x0, 0x12, 0x90A60140), - AZALIA_PIN_CFG(0x0, 0x14, 0x90170110), - AZALIA_PIN_CFG(0x0, 0x15, 0x03211020), - AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), - AZALIA_PIN_CFG(0x0, 0x19, 0x411111F0), - - 0x01970804, - 0x01870803, - 0x01470740, - 0x00970600, - - AZALIA_PIN_CFG(0x0, 0x1A, 0x411111F0), - AZALIA_PIN_CFG(0x0, 0x1D, 0x40138205), - AZALIA_PIN_CFG(0x0, 0x1E, 0x411111F0), - - /* Misc entries */ - 0x00370600, - 0x00270600, - 0x00B707C0, /* Enable PortB as Output with HP amp */ - 0x00D70740, /* Enable PortD as Output */ - 0x0017A200, /* Disable ClkEn of PortSenseTst */ - 0x0017C621, /* Slave Port - Port A used as microphone input for - combo Jack - Master Port - Port B used for Jack Presence Detect - Enable Combo Jack Detection */ - 0x0017A208, /* Enable ClkEn of PortSenseTst */ - 0x00170500, /* Set power state to D0 */ - - /* --- Next Codec --- */ - -/* Vendor Name : Intel - * Vendor ID : 0x80862806 - * Subsystem ID : 0x80860101 - * Revision ID : 0x100000 - */ - /* coreboot specific header */ - 0x80862806, // Codec Vendor / Device ID: Intel PantherPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of IDs - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x3, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[] = { - 0x02177a00, /* Digital PCBEEP Gain: 0h=-9db, 1h=-6db ... 4h=+3db, 5h=+6db */ -}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/x230/mainboard.c b/src/mainboard/lenovo/x230/mainboard.c deleted file mode 100644 index a060015..0000000 --- a/src/mainboard/lenovo/x230/mainboard.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011-2012 Google Inc. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <types.h> -#include <string.h> -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> -#include <drivers/intel/gma/int15.h> -#include <arch/acpi.h> -#include <boot/coreboot_tables.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <smbios.h> -#include <device/pci.h> -#include <pc80/keyboard.h> -#include <ec/lenovo/h8/h8.h> -#include <build.h> - -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - -static void mainboard_init(device_t dev) -{ - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x38c0) = 0x00000007; - - /* This sneaked in here, because X201 SuperIO chip isn't really - connected to anything and hence we don't init it. - */ - pc_keyboard_init(); - - /* Enable expresscard hotplug events. */ - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), - 0xd8, - pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), 0xd8) - | (1 << 30)); - pci_write_config16(dev_find_slot(0, PCI_DEVFN(0x1c, 2)), - 0x42, 0x142); -} - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -void h8_mainboard_init_dock (void) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/x230/romstage.c b/src/mainboard/lenovo/x230/romstage.c deleted file mode 100644 index 2c39741..0000000 --- a/src/mainboard/lenovo/x230/romstage.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <lib.h> -#include <timestamp.h> -#include <arch/byteorder.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <console/console.h> -#include "northbridge/intel/sandybridge/sandybridge.h" -#include "northbridge/intel/sandybridge/raminit_native.h" -#include "southbridge/intel/bd82x6x/pch.h" -#include "southbridge/intel/bd82x6x/gpio.h" -#include <arch/cpu.h> -#include <cpu/x86/msr.h> -#include <cbfs.h> - -void pch_enable_lpc(void) -{ - /* X230 EC Decode Range Port60/64, Port62/66 */ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0x7c1601); - pci_write_config32(PCH_LPC_DEV, LPC_GEN2_DEC, 0xc15e1); - pci_write_config32(PCH_LPC_DEV, LPC_GEN4_DEC, 0x0c06a1); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xac, - 0x80010000); -} - -void rcba_config(void) -{ - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP WLAN INTA -> PIRQB - * D28IP_P2IP ETH0 INTB -> PIRQF - * D28IP_P3IP SDCARD INTC -> PIRQD - * D29IP_E1P EHCI1 INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQF - * D31IP_SIP SATA INTA -> PIRQB (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQH - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQA (MSI) - * - * Trackpad interrupt is edge triggered and cannot be shared. - * TRACKPAD -> PIRQG - - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTB << D28IP_P2IP) | - (INTC << D28IP_P3IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (NOINT << D25IP_LIP); - RCBA32(D22IP) = (NOINT << D22IP_MEI1IP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQB, PIRQH, PIRQA, PIRQC); - DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG); - DIR_ROUTE(D28IR, PIRQB, PIRQF, PIRQD, PIRQE); - DIR_ROUTE(D27IR, PIRQA, PIRQH, PIRQA, PIRQB); - DIR_ROUTE(D26IR, PIRQF, PIRQE, PIRQG, PIRQH); - DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - RCBA32(FD) = 0x17f81fe3; - RCBA32(BUC) = 0; -} - -const struct southbridge_usb_port mainboard_usb_ports[] = { - { 1, 0, 0 }, /* P0 (left, fan side), OC 0 */ - { 1, 0, 1 }, /* P1 (left touchpad side), OC 1 */ - { 1, 1, 3 }, /* P2: dock, OC 3 */ - { 1, 1, -1 }, /* P3: wwan, no OC */ - { 1, 1, -1 }, /* P4: Wacom tablet on X230t, otherwise empty */ - { 1, 1, -1 }, /* P5: Expresscard, no OC */ - { 0, 0, -1 }, /* P6: Empty */ - { 1, 2, -1 }, /* P7: dock, no OC */ - { 1, 0, -1 }, - { 1, 2, 5 }, /* P9: Right (EHCI debug), OC 5 */ - { 1, 1, -1 }, /* P10: fingerprint reader, no OC */ - { 1, 1, -1 }, /* P11: bluetooth, no OC. */ - { 1, 1, -1 }, /* P12: wlan, no OC */ - { 1, 1, -1 }, /* P13: webcam, no OC */ -}; - -void mainboard_get_spd(spd_raw_data *spd) { - read_spd (&spd[0], 0x50); - read_spd (&spd[2], 0x51); -} diff --git a/src/mainboard/lenovo/x230/smihandler.c b/src/mainboard/lenovo/x230/smihandler.c deleted file mode 100644 index 5bcde1c..0000000 --- a/src/mainboard/lenovo/x230/smihandler.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include <southbridge/intel/bd82x6x/nvs.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <southbridge/intel/bd82x6x/me.h> -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_206ax/model_206ax.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, - (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch (event) { - case 0x14: - /* brightness up */ - mainboard_smi_brightness_up(); - break; - case 0x15: - /* brightness down */ - mainboard_smi_brightness_down(); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ - if (gpi_sts & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, - pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - - default: - break; - } - return 0; -} - -void mainboard_smi_sleep(u8 slp_typ) -{ - if (slp_typ == 3) { - u8 ec_wake = ec_read(0x32); - /* If EC wake events are enabled, enable wake on EC WAKE GPE. */ - if (ec_wake & 0x14) { - u32 gpe_rout; - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* Enable EC WAKE GPE. */ - outl(inl(pmbase + GPE0_EN) | (1 << 29), pmbase + GPE0_EN); - gpe_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT); - /* Redirect EC WAKE GPE to SCI. */ - gpe_rout &= ~(3 << 26); - gpe_rout |= (2 << 26); - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpe_rout); - } - } -} diff --git a/src/mainboard/lenovo/x230/thermal.h b/src/mainboard/lenovo/x230/thermal.h deleted file mode 100644 index ab24bb1..0000000 --- a/src/mainboard/lenovo/x230/thermal.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2014 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef X230_THERMAL_H -#define X230_THERMAL_H - - /* Temperature which OS will shutdown at */ - #define CRITICAL_TEMPERATURE 100 - - /* Temperature which OS will throttle CPU */ - #define PASSIVE_TEMPERATURE 90 - -#endif diff --git a/src/mainboard/lenovo/x60/Kconfig b/src/mainboard/lenovo/x60/Kconfig deleted file mode 100644 index 0125d8c..0000000 --- a/src/mainboard/lenovo/x60/Kconfig +++ /dev/null @@ -1,63 +0,0 @@ -if BOARD_LENOVO_X60 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select CPU_INTEL_SOCKET_MFCPGA478 - select NORTHBRIDGE_INTEL_I945 - select NORTHBRIDGE_INTEL_SUBTYPE_I945GM - select SOUTHBRIDGE_INTEL_I82801GX - select SOUTHBRIDGE_RICOH_RL5C476 - select SUPERIO_NSC_PC87382 - select SUPERIO_NSC_PC87392 - select EC_LENOVO_PMH7 - select EC_LENOVO_H8 - select DRIVERS_ICS_954309 - select HAVE_OPTION_TABLE - select INTEL_INT15 - select HAVE_CMOS_DEFAULT - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_2048 - select CHANNEL_XOR_RANDOMIZATION - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select USE_OPTION_TABLE - select MAINBOARD_HAS_NATIVE_VGA_INIT - select H8_DOCK_EARLY_INIT - select DRIVERS_LENOVO_WACOM - select INTEL_EDID - -config MAINBOARD_DIR - string - default lenovo/x60 - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config MAINBOARD_PART_NUMBER - string - default "ThinkPad X60" - -config MMCONF_BASE_ADDRESS - hex - default 0xf0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config MAX_CPUS - int - default 2 - -config SEABIOS_PS2_TIMEOUT - int - default 3000 - -endif diff --git a/src/mainboard/lenovo/x60/Makefile.inc b/src/mainboard/lenovo/x60/Makefile.inc deleted file mode 100644 index 0b01fe4..0000000 --- a/src/mainboard/lenovo/x60/Makefile.inc +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += dock.c -romstage-y += dock.c -ramstage-y += dock.c diff --git a/src/mainboard/lenovo/x60/acpi/dock.asl b/src/mainboard/lenovo/x60/acpi/dock.asl deleted file mode 100644 index 136f888..0000000 --- a/src/mainboard/lenovo/x60/acpi/dock.asl +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" - -Scope (_SB) -{ - OperationRegion (DLPC, SystemIO, 0x164c, 1) - Field(DLPC, ByteAcc, NoLock, Preserve) - { - , 3, - DSTA, 1, - } - - Device(DOCK) - { - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_DCK, 1, NotSerialized) - { - if (Arg0) { - /* connect dock */ - TRAP(SMI_DOCK_CONNECT) - } else { - /* disconnect dock */ - TRAP(SMI_DOCK_DISCONNECT) - } - - Xor(Arg0, DSTA, Local0) - Return (Local0) - } - - Method(_STA, 0, NotSerialized) - { - Return (DSTA) - } - } -} - -Scope(_SB.PCI0.LPCB.EC) -{ - Method(_Q18, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q50, 0, NotSerialized) - { - Notify(_SB.DOCK, 3) - } - - Method(_Q58, 0, NotSerialized) - { - Notify(_SB.DOCK, 0) - } - -} diff --git a/src/mainboard/lenovo/x60/acpi/ec.asl b/src/mainboard/lenovo/x60/acpi/ec.asl deleted file mode 100644 index a92bc4a..0000000 --- a/src/mainboard/lenovo/x60/acpi/ec.asl +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <ec/lenovo/h8/acpi/ec.asl> diff --git a/src/mainboard/lenovo/x60/acpi/gpe.asl b/src/mainboard/lenovo/x60/acpi/gpe.asl deleted file mode 100644 index b160b50..0000000 --- a/src/mainboard/lenovo/x60/acpi/gpe.asl +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" -Scope (_GPE) -{ - Method(_L18, 0, NotSerialized) - { - /* Read EC register to clear wake status */ - Store(_SB.PCI0.LPCB.EC.WAKE, Local0) - } -} diff --git a/src/mainboard/lenovo/x60/acpi/i945_pci_irqs.asl b/src/mainboard/lenovo/x60/acpi/i945_pci_irqs.asl deleted file mode 100644 index e834ae1..0000000 --- a/src/mainboard/lenovo/x60/acpi/i945_pci_irqs.asl +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * i945 - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x14 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x15 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x16 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x17 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x10 } // SATA - }) - } Else { - Return (Package() { - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // PCI - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // PCI - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // PCI - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // PCI - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKA, 0 } // SATA - }) - } -} diff --git a/src/mainboard/lenovo/x60/acpi/ich7_pci_irqs.asl b/src/mainboard/lenovo/x60/acpi/ich7_pci_irqs.asl deleted file mode 100644 index 548996c..0000000 --- a/src/mainboard/lenovo/x60/acpi/ich7_pci_irqs.asl +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing for the - * 0:1e.0 PCI bridge of the ICH7 - */ - -If (PICM) { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x16 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 } - }) - } Else { - Return (Package() { - Package (0x04) { 0x0000FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, _SB.PCI0.LPCB.LNKB, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, _SB.PCI0.LPCB.LNKC, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LPCB.LNKA, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LPCB.LNKF, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LPCB.LNKG, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LPCB.LNKE, 0x00 } - }) -} diff --git a/src/mainboard/lenovo/x60/acpi/mainboard.asl b/src/mainboard/lenovo/x60/acpi/mainboard.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/lenovo/x60/acpi/platform.asl b/src/mainboard/lenovo/x60/acpi/platform.asl deleted file mode 100644 index ddb8ff3..0000000 --- a/src/mainboard/lenovo/x60/acpi/platform.asl +++ /dev/null @@ -1,205 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, // APM command - APMS, 8 // APM status -} - -/* Port 80 POST */ - -OperationRegion (POST, SystemIO, 0x80, 1) -Field (POST, ByteAcc, Lock, Preserve) -{ - DBG0, 8 -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) // SMI Function - Store (0, TRP0) // Generate trap - Return (SMIF) // Return value of SMI handler -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - // Remember the OS' IRQ routing choice. - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - _SB.PCI0.LPCB.EC.MUTE(1) - _SB.PCI0.LPCB.EC.USBP(0) -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - // CPU specific part - - // Notify PCI Express slots in case a card - // was inserted while a sleep state was active. - - // Are we going to S3? - If (LEqual(Arg0, 3)) { - // .. - } - - // Are we going to S4? - If (LEqual(Arg0, 4)) { - // .. - } - - // TODO: Windows XP SP2 P-State restore - - Return(Package(){0,0}) -} - -// Power notification - -External (_PR_.CPU0, DeviceObj) -External (_PR_.CPU1, DeviceObj) - -Method (PNOT) -{ - If (MPEN) { - If(And(PDC0, 0x08)) { - Notify (_PR_.CPU0, 0x80) // _PPC - - If (And(PDC0, 0x10)) { - Sleep(100) - Notify(_PR_.CPU0, 0x81) // _CST - } - } - - If(And(PDC1, 0x08)) { - Notify (_PR_.CPU1, 0x80) // _PPC - If (And(PDC1, 0x10)) { - Sleep(100) - Notify(_PR_.CPU1, 0x81) // _CST - } - } - - } Else { // UP - Notify (_PR_.CPU0, 0x80) - Sleep(0x64) - Notify(_PR_.CPU0, 0x81) - } - - // Notify the Batteries - Notify(_SB.PCI0.LPCB.EC.BAT0, 0x80) // Execute BAT1 _BST - Notify(_SB.PCI0.LPCB.EC.BAT1, 0x80) // Execute BAT2 _BST -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - // TRAP(71) // TODO - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - /* Linux answers _OSI with "True" for a couple of - * Windows version queries. But unlike Windows it - * needs a Video repost, so let's determine whether - * we're running Linux. - */ - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - - /* And the OS workarounds start right after we know what we're - * running: Windows XP SP1 needs to have C-State coordination - * enabled in SMM. - */ - If (LAnd(LEqual(OSYS, 2001), MPEN)) { - // TRAP(61) // TODO - } - - /* SMM power state and C4-on-C3 settings need to be updated */ - // TRAP(43) // TODO - } -} diff --git a/src/mainboard/lenovo/x60/acpi/superio.asl b/src/mainboard/lenovo/x60/acpi/superio.asl deleted file mode 100644 index e69de29..0000000 diff --git a/src/mainboard/lenovo/x60/acpi/video.asl b/src/mainboard/lenovo/x60/acpi/video.asl deleted file mode 100644 index b38d82b..0000000 --- a/src/mainboard/lenovo/x60/acpi/video.asl +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include "smi.h" - -Device (DSPC) -{ - Name (_ADR, 0x00020001) - OperationRegion (DSPC, PCI_Config, 0x00, 0x100) - Field (DSPC, ByteAcc, NoLock, Preserve) - { - Offset (0xf4), - BRTC, 8 - } - - Method(BRTD, 0, NotSerialized) - { - Store(BRTC, Local0) - if (LGreater (Local0, 15)) - { - Subtract(Local0, 16, Local0) - Store(Local0, BRTC) - Trap(SMI_SAVE_CMOS) - } - } - - Method(BRTU, 0, NotSerialized) - { - Store (BRTC, Local0) - if (LLess(Local0, 0xff)) - { - Add (Local0, 16, Local0) - Store(Local0, BRTC) - Trap(SMI_SAVE_CMOS) - } - } -} diff --git a/src/mainboard/lenovo/x60/acpi_tables.c b/src/mainboard/lenovo/x60/acpi_tables.c deleted file mode 100644 index ada7d08..0000000 --- a/src/mainboard/lenovo/x60/acpi_tables.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#include "southbridge/intel/i82801gx/nvs.h" -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - - /* Enable both COM ports */ - gnvs->cmap = 0x01; - gnvs->cmbp = 0x01; - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_EDGE); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_POLARITY_HIGH | MP_IRQ_TRIGGER_LEVEL); - - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/lenovo/x60/board_info.txt b/src/mainboard/lenovo/x60/board_info.txt deleted file mode 100644 index 5d4b926..0000000 --- a/src/mainboard/lenovo/x60/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: X60/X60s -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lenovo/x60/cmos.default b/src/mainboard/lenovo/x60/cmos.default deleted file mode 100644 index 0185e94..0000000 --- a/src/mainboard/lenovo/x60/cmos.default +++ /dev/null @@ -1,21 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -hyper_threading=Enable -nmi=Enable -boot_devices='' -boot_default=0x40 -cmos_defaults_loaded=Yes -lpt=Enable -volume=0x3 -tft_brightness=0xff -first_battery=Primary -bluetooth=Enable -wlan=Enable -wwan=Enable -trackpoint=Enable -fn_ctrl_swap=Disable -sticky_fn=Disable -power_management_beeps=Enable -low_battery_beep=Enable diff --git a/src/mainboard/lenovo/x60/cmos.layout b/src/mainboard/lenovo/x60/cmos.layout deleted file mode 100644 index a74d793..0000000 --- a/src/mainboard/lenovo/x60/cmos.layout +++ /dev/null @@ -1,160 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2008 coresystems GmbH -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 h 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -#409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default -936 1 e 8 cmos_defaults_loaded -937 1 e 1 lpt -#938 46 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ram initialization internal data -1024 8 r 0 C0WL0REOST -1032 8 r 0 C1WL0REOST -1040 8 r 0 RCVENMT -1048 4 r 0 C0DRT1 -1052 4 r 0 C1DRT1 - -1064 8 h 0 volume -1072 8 h 0 tft_brightness -1080 1 e 9 first_battery -1081 1 e 1 bluetooth -1082 1 e 1 wwan -1083 1 e 1 wlan -1084 1 e 1 trackpoint -1085 1 e 1 fn_ctrl_swap -1086 1 e 1 sticky_fn -1087 1 e 1 power_management_beeps -1088 1 e 1 low_battery_beep -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 No -8 1 Yes -9 0 Secondary -9 1 Primary - -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lenovo/x60/devicetree.cb b/src/mainboard/lenovo/x60/devicetree.cb deleted file mode 100644 index fcf7c29..0000000 --- a/src/mainboard/lenovo/x60/devicetree.cb +++ /dev/null @@ -1,217 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/i945 - - register "gpu_hotplug" = "0x00000220" - register "gpu_lvds_use_spread_spectrum_clock" = "1" - register "gpu_lvds_is_dual_channel" = "0" - register "gpu_backlight" = "0x1280128" - - device cpu_cluster 0 on - chip cpu/intel/socket_mFCPGA478 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x17aa 0x2017 - end - device pci 02.0 on # VGA controller - subsystemid 0x17aa 0x201a - end - device pci 02.1 on # display controller - subsystemid 0x17aa 0x201a - end - chip southbridge/intel/i82801gx - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi13_routing" = "2" - register "gpi12_routing" = "1" - register "gpi8_routing" = "2" - - register "sata_ahci" = "0x1" - register "sata_ports_implemented" = "0x01" - - register "gpe0_en" = "0x11000006" - register "alt_gp_smi_en" = "0x1000" - - register "c4onc3_enable" = "1" - device pci 1b.0 on # Audio Controller - subsystemid 0x17aa 0x2010 - end - device pci 1c.0 on end # Ethernet - device pci 1c.1 on end # Atheros WLAN - device pci 1d.0 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.1 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.2 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.3 on # USB UHCI - subsystemid 0x17aa 0x200a - end - device pci 1d.7 on # USB2 EHCI - subsystemid 0x17aa 0x200b - end - device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x17aa 0x2009 - chip ec/lenovo/pmh7 - device pnp ff.1 on # dummy - end - register "backlight_enable" = "0x01" - register "dock_event_enable" = "0x01" - end - chip ec/lenovo/h8 - device pnp ff.2 on # dummy - io 0x60 = 0x62 - io 0x62 = 0x66 - io 0x64 = 0x1600 - io 0x66 = 0x1604 - end - - register "config0" = "0xa6" - register "config1" = "0x05" - register "config2" = "0xa0" - register "config3" = "0x01" - - register "beepmask0" = "0xfe" - register "beepmask1" = "0x96" - register "has_power_management_beeps" = "1" - - register "event2_enable" = "0xff" - register "event3_enable" = "0xff" - register "event4_enable" = "0xf4" - register "event5_enable" = "0x3c" - register "event6_enable" = "0x80" - register "event7_enable" = "0x01" - register "eventc_enable" = "0x3c" - register "event8_enable" = "0x01" - register "event9_enable" = "0xff" - register "eventa_enable" = "0xff" - register "eventb_enable" = "0xff" - register "eventc_enable" = "0xff" - register "eventd_enable" = "0xff" - end - chip superio/nsc/pc87382 - device pnp 164e.2 on # IR - io 0x60 = 0x2f8 - end - - device pnp 164e.3 on # Digitizer - io 0x60 = 0x200 - irq 0x29 = 0xb0 - irq 0x70 = 0x5 - irq 0xf0 = 0x82 - end - - device pnp 164e.7 on # GPIO - io 0x60 = 0x1680 - end - - device pnp 164e.19 on # DLPC - io 0x60 = 0x164c - end - end - - chip superio/nsc/pc87392 - device pnp 2e.0 off #FDC - end - - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x3bc - irq 0x70 = 7 - end - - device pnp 2e.2 off # Serial Port / IR - io 0x60 = 0x2f8 - irq 0x70 = 4 - end - - device pnp 2e.3 on # Serial Port - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.7 on # GPIO - io 0x60 = 0x1620 - end - - device pnp 2e.a off # WDT - end - end - end - device pci 1f.1 on # IDE - subsystemid 0x17aa 0x200c - end - device pci 1f.2 on # SATA - subsystemid 0x17aa 0x200d - end - device pci 1f.3 on # SMBUS - subsystemid 0x17aa 0x200f - chip drivers/ics/954309 - register "reg0" = "0x2e" - register "reg1" = "0xf7" - register "reg2" = "0x3c" - register "reg3" = "0x20" - register "reg4" = "0x01" - register "reg5" = "0x00" - register "reg6" = "0x1b" - register "reg7" = "0x01" - register "reg8" = "0x54" - register "reg9" = "0xff" - register "reg10" = "0xff" - register "reg11" = "0x07" - device i2c 69 on end - end - # eeprom, 8 virtual devices, same chip - chip drivers/i2c/at24rf08c - device i2c 54 on end - device i2c 55 on end - device i2c 56 on end - device i2c 57 on end - device i2c 5c on end - device i2c 5d on end - device i2c 5e on end - device i2c 5f on end - end - end - end - chip southbridge/ricoh/rl5c476 - end - end -end diff --git a/src/mainboard/lenovo/x60/dock.c b/src/mainboard/lenovo/x60/dock.c deleted file mode 100644 index 1f85281..0000000 --- a/src/mainboard/lenovo/x60/dock.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <arch/io.h> -#include "dock.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include "superio/nsc/pc87392/pc87392.h" - -static void dlpc_write_register(int reg, int value) -{ - outb(reg, 0x164e); - outb(value, 0x164f); -} - -static u8 dlpc_read_register(int reg) -{ - outb(reg, 0x164e); - return inb(0x164f); -} - -static void dock_write_register(int reg, int value) -{ - outb(reg, 0x2e); - outb(value, 0x2f); -} - -static u8 dock_read_register(int reg) -{ - outb(reg, 0x2e); - return inb(0x2f); -} - -static void dlpc_gpio_set_mode(int port, int mode) -{ - dlpc_write_register(0xf0, port); - dlpc_write_register(0xf1, mode); -} - -static void dock_gpio_set_mode(int port, int mode, int irq) -{ - dock_write_register(0xf0, port); - dock_write_register(0xf1, mode); - dock_write_register(0xf2, irq); -} - -static void dlpc_gpio_init(void) -{ - /* Select GPIO module */ - dlpc_write_register(0x07, 0x07); - /* GPIO Base Address 0x1680 */ - dlpc_write_register(0x60, 0x16); - dlpc_write_register(0x61, 0x80); - - /* Activate GPIO */ - dlpc_write_register(0x30, 0x01); - - dlpc_gpio_set_mode(0x00, 3); - dlpc_gpio_set_mode(0x01, 3); - dlpc_gpio_set_mode(0x02, 0); - dlpc_gpio_set_mode(0x03, 3); - dlpc_gpio_set_mode(0x04, 4); - dlpc_gpio_set_mode(0x20, 4); - dlpc_gpio_set_mode(0x21, 4); - dlpc_gpio_set_mode(0x23, 4); -} - -int dlpc_init(void) -{ - int timeout = 1000; - - /* Enable 14.318MHz CLK on CLKIN */ - dlpc_write_register(0x29, 0xa0); - while(!(dlpc_read_register(0x29) & 0x10) && timeout--) - udelay(1000); - - if (!timeout) - return 1; - - /* Select DLPC module */ - dlpc_write_register(0x07, 0x19); - /* DLPC Base Address 0x164c */ - dlpc_write_register(0x60, 0x16); - dlpc_write_register(0x61, 0x4c); - /* Activate DLPC */ - dlpc_write_register(0x30, 0x01); - - dlpc_gpio_init(); - - return 0; -} - -int dock_connect(void) -{ - int timeout = 1000; - - outb(0x07, 0x164c); - - timeout = 1000; - - while(!(inb(0x164c) & 8) && timeout--) - udelay(1000); - - if (!timeout) { - /* docking failed, disable DLPC switch */ - outb(0x00, 0x164c); - dlpc_write_register(0x30, 0x00); - return 1; - } - - /* Assert D_PLTRST# */ - outb(0xfe, 0x1680); - udelay(100000); - /* Deassert D_PLTRST# */ - outb(0xff, 0x1680); - - udelay(100000); - - /* startup 14.318MHz Clock */ - dock_write_register(0x29, 0x06); - /* wait until clock is settled */ - timeout = 1000; - while(!(dock_read_register(0x29) & 0x08) && timeout--) - udelay(1000); - - if (!timeout) - return 1; - - /* Pin 6: CLKRUN - * Pin 72: #DR1 - * Pin 19: #SMI - * Pin 73: #MTR - */ - dock_write_register(0x24, 0x37); - - /* PNF active HIGH */ - dock_write_register(0x25, 0xa0); - - /* disable FDC */ - dock_write_register(0x26, 0x01); - - /* Enable GPIO IRQ to #SMI */ - dock_write_register(0x28, 0x02); - - /* select GPIO */ - dock_write_register(0x07, 0x07); - - /* set base address */ - dock_write_register(0x60, 0x16); - dock_write_register(0x61, 0x20); - - /* init GPIO pins */ - dock_gpio_set_mode(0x00, PC87392_GPIO_PIN_DEBOUNCE | - PC87392_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x01, PC87392_GPIO_PIN_DEBOUNCE | - PC87392_GPIO_PIN_PULLUP, - PC87392_GPIO_PIN_TRIGGERS_SMI); - - dock_gpio_set_mode(0x02, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x03, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x04, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x05, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x06, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x07, PC87392_GPIO_PIN_PULLUP, 0x02); - - dock_gpio_set_mode(0x10, PC87392_GPIO_PIN_DEBOUNCE | - PC87392_GPIO_PIN_PULLUP, - PC87392_GPIO_PIN_TRIGGERS_SMI); - - dock_gpio_set_mode(0x11, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x12, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x13, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x14, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x15, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x16, PC87392_GPIO_PIN_PULLUP | - PC87392_GPIO_PIN_OE , 0x00); - - dock_gpio_set_mode(0x17, PC87392_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x20, PC87392_GPIO_PIN_TYPE_PUSH_PULL | - PC87392_GPIO_PIN_OE, 0x00); - - dock_gpio_set_mode(0x21, PC87392_GPIO_PIN_TYPE_PUSH_PULL | - PC87392_GPIO_PIN_OE, 0x00); - - dock_gpio_set_mode(0x22, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x23, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x24, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x25, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x26, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x27, PC87392_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x30, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x31, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x32, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x33, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x34, PC87392_GPIO_PIN_PULLUP, 0x00); - - dock_gpio_set_mode(0x35, PC87392_GPIO_PIN_PULLUP | - PC87392_GPIO_PIN_OE, 0x00); - - dock_gpio_set_mode(0x36, PC87392_GPIO_PIN_PULLUP, 0x00); - dock_gpio_set_mode(0x37, PC87392_GPIO_PIN_PULLUP, 0x00); - - /* enable GPIO */ - dock_write_register(0x30, 0x01); - - outb(0x00, 0x1628); - outb(0x00, 0x1623); - outb(0x82, 0x1622); - outb(0xff, 0x1624); - - /* Enable USB and Ultrabay power */ - outb(0x03, 0x1628); - - dock_write_register(0x07, 0x03); - dock_write_register(0x30, 0x01); - return 0; -} - -void dock_disconnect(void) -{ - printk(BIOS_DEBUG, "%s enter\n", __func__); - /* disconnect LPC bus */ - outb(0x00, 0x164c); - udelay(10000); - - /* Assert PLTRST and DLPCPD */ - outb(0xfc, 0x1680); - udelay(10000); - - /* disable Ultrabay and USB Power */ - outb(0x00, 0x1628); - udelay(10000); - - printk(BIOS_DEBUG, "%s finish\n", __func__); -} - -int dock_present(void) -{ - return !((inb(DEFAULT_GPIOBASE + 0x0c) >> 13) & 1); -} - -int dock_ultrabay_device_present(void) -{ - return inb(0x1621) & 0x02 ? 0 : 1; -} diff --git a/src/mainboard/lenovo/x60/dock.h b/src/mainboard/lenovo/x60/dock.h deleted file mode 100644 index 141ae48..0000000 --- a/src/mainboard/lenovo/x60/dock.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef THINKPAD_X60_DOCK_H -#define THINKPAD_X60_DOCK_H - -extern int dock_connect(void); -extern void dock_disconnect(void); -extern int dock_present(void); -extern int dlpc_init(void); -extern int dock_ultrabay_device_present(void); -#endif diff --git a/src/mainboard/lenovo/x60/dsdt.asl b/src/mainboard/lenovo/x60/dsdt.asl deleted file mode 100644 index 4122917..0000000 --- a/src/mainboard/lenovo/x60/dsdt.asl +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define THINKPAD_EC_GPE 28 -#define BRIGHTNESS_UP \DSPC.BRTU -#define BRIGHTNESS_DOWN \DSPC.BRTD -#define ACPI_VIDEO_DEVICE _SB.PCI0.GFX0 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, // DSDT revision: ACPI v3.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20090419 // OEM revision -) -{ - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include <southbridge/intel/i82801gx/acpi/globalnvs.asl> - - // General Purpose Events - #include "acpi/gpe.asl" - - // mainboard specific devices - #include "acpi/mainboard.asl" - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/i945/acpi/i945.asl> - #include <southbridge/intel/i82801gx/acpi/ich7.asl> - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> - - // Dock support code - #include "acpi/dock.asl" -} diff --git a/src/mainboard/lenovo/x60/fadt.c b/src/mainboard/lenovo/x60/fadt.c deleted file mode 100644 index 96767bd..0000000 --- a/src/mainboard/lenovo/x60/fadt.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/acpi.h> - -void mainboard_fill_fadt(acpi_fadt_t * fadt) -{ - fadt->p_lvl3_lat = 0x23; - fadt->flags |= ACPI_FADT_DOCKING_SUPPORTED; -} diff --git a/src/mainboard/lenovo/x60/hda_verb.c b/src/mainboard/lenovo/x60/hda_verb.c deleted file mode 100644 index 072a306..0000000 --- a/src/mainboard/lenovo/x60/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/lenovo/x60/irq_tables.c b/src/mainboard/lenovo/x60/irq_tables.c deleted file mode 100644 index 8991d7f..0000000 --- a/src/mainboard/lenovo/x60/irq_tables.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 15, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf5, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x02 << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* VGA 0:02.0 */ - {0x00, (0x1b << 3) | 0x0, {{0x00, 0xdef8}, {0x61, 0x1cf8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* HD Audio 0:1b.0 */ - {0x00, (0x1c << 3) | 0x0, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.0 */ - {0x00, (0x1c << 3) | 0x1, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.1 */ - {0x00, (0x1c << 3) | 0x2, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.2 */ - {0x00, (0x1c << 3) | 0x3, {{0x68, 0x1cf8}, {0x69, 0x1cf8}, {0x6a, 0x1cf8}, {0x6b, 0x1cf8}}, 0x0, 0x0}, /* PCIe 0:1c.3 */ - {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.0 */ - {0x00, (0x1d << 3) | 0x1, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.1 */ - {0x00, (0x1d << 3) | 0x2, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.2 */ - {0x00, (0x1d << 3) | 0x3, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* USB 0:1d.3 */ - {0x00, (0x1e << 3) | 0x0, {{0x60, 0x1cf8}, {0x61, 0x1cf8}, {0x62, 0x1cf8}, {0x63, 0x1cf8}}, 0x0, 0x0}, /* PCI 0:1e.0 */ - {0x00, (0x1f << 3) | 0x0, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* LPC 0:1f.0 */ - {0x00, (0x1f << 3) | 0x1, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* IDE 0:1f.1 */ - {0x00, (0x1f << 3) | 0x2, {{0x6b, 0x1cf8}, {0x60, 0x1cf8}, {0x60, 0x1cf8}, {0x00, 0xdef8}}, 0x0, 0x0}, /* SATA 0:1f.2 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lenovo/x60/mainboard.c b/src/mainboard/lenovo/x60/mainboard.c deleted file mode 100644 index 1d29c71..0000000 --- a/src/mainboard/lenovo/x60/mainboard.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <ec/lenovo/pmh7/pmh7.h> -#include <ec/acpi/ec.h> -#include <ec/lenovo/h8/h8.h> -#include <northbridge/intel/i945/i945.h> -#include <pc80/mc146818rtc.h> -#include "dock.h" -#include <arch/x86/include/arch/acpigen.h> -#include <smbios.h> -#include <build.h> -#include <drivers/intel/gma/int15.h> -#include "drivers/lenovo/lenovo.h" - -#define PANEL INT15_5F35_CL_DISPLAY_DEFAULT - -static acpi_cstate_t cst_entries[] = { - { 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } }, - { 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } }, - { 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } }, -}; - -int get_cst_entries(acpi_cstate_t **entries) -{ - *entries = cst_entries; - return ARRAY_SIZE(cst_entries); -} - -static void mainboard_init(device_t dev) -{ - device_t dev0, idedev, sdhci_dev; - - ec_clr_bit(0x03, 2); - - if (inb(0x164c) & 0x08) { - ec_set_bit(0x03, 2); - ec_write(0x0c, 0x88); - } - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, PANEL, 3); - - /* If we're resuming from suspend, blink suspend LED */ - dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); - if (dev0 && pci_read_config32(dev0, SKPAD) == SKPAD_ACPI_S3_MAGIC) - ec_write(0x0c, 0xc7); - - idedev = dev_find_slot(0, PCI_DEVFN(0x1f,1)); - if (idedev && idedev->chip_info && dock_ultrabay_device_present()) { - struct southbridge_intel_i82801gx_config *config = idedev->chip_info; - config->ide_enable_primary = 1; - /* enable Ultrabay power */ - outb(inb(0x1628) | 0x01, 0x1628); - ec_write(0x0c, 0x84); - } else { - /* disable Ultrabay power */ - outb(inb(0x1628) & ~0x01, 0x1628); - ec_write(0x0c, 0x04); - } - - /* Set SDHCI write protect polarity "SDWPPol" */ - sdhci_dev = dev_find_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C822, 0); - if (sdhci_dev) { - if (pci_read_config8(sdhci_dev, 0xfa) != 0x20) { - /* unlock */ - pci_write_config8(sdhci_dev, 0xf9, 0xfc); - /* set SDWPPol, keep CLKRUNDis, SDPWRPol clear */ - pci_write_config8(sdhci_dev, 0xfa, 0x20); - /* restore lock */ - pci_write_config8(sdhci_dev, 0xf9, 0x00); - } - } -} - -const char *smbios_mainboard_bios_version(void) -{ - /* Satisfy thinkpad_acpi. */ - if (strlen(CONFIG_LOCALVERSION)) - return "CBET4000 " CONFIG_LOCALVERSION; - else - return "CBET4000 " COREBOOT_VERSION; -} - -static void fill_ssdt(void) -{ - drivers_lenovo_serial_ports_ssdt_generate("\_SB.PCI0.LPCB", 1); -} - -static void mainboard_enable(device_t dev) -{ - dev->ops->init = mainboard_init; - dev->ops->acpi_fill_ssdt_generator = fill_ssdt; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lenovo/x60/mptable.c b/src/mainboard/lenovo/x60/mptable.c deleted file mode 100644 index 8ade71b..0000000 --- a/src/mainboard/lenovo/x60/mptable.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci.h> -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &isa_bus); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - - /* Legacy Interrupts */ - mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); - - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, isa_bus, 0x00, MP_APIC_ALL, 0x00); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x00, MP_APIC_ALL, 0x01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x01 << 2), 0x02, 0x10); /* PCIe root 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x02 << 2), 0x02, 0x10); /* VGA 0.02.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1b << 2), 0x02, 0x11); /* HD Audio 0:1b.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2), 0x02, 0x14); /* PCIe 0:1c.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x01, 0x02, 0x15); /* PCIe 0:1c.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x02, 0x02, 0x16); /* PCIe 0:1c.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1c << 2) | 0x03, 0x02, 0x17); /* PCIe 0:1c.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) , 0x02, 0x10); /* USB 0:1d.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x01, 0x02, 0x11); /* USB 0:1d.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x02, 0x02, 0x12); /* USB 0:1d.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1d << 2) | 0x03, 0x02, 0x13); /* USB 0:1d.3 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) , 0x02, 0x17); /* LPC 0:1f.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x01, 0x02, 0x10); /* IDE 0:1f.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x00, (0x1f << 2) | 0x02, 0x02, 0x10); /* SATA 0:1f.2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x00, 0x02, 0x10); /* Cardbus 5:00.0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x01, 0x02, 0x11); /* Firewire 5:00.1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x05, (0x00 << 2) | 0x02, 0x02, 0x12); /* SDHC 5:00.2 */ - - mptable_lintsrc(mc, isa_bus); - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c deleted file mode 100644 index 943143a..0000000 --- a/src/mainboard/lenovo/x60/romstage.c +++ /dev/null @@ -1,336 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -// __PRE_RAM__ means: use "unsigned" for device, not a struct. - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <arch/acpi.h> -#include <cbmem.h> -#include <timestamp.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include "northbridge/intel/i945/i945.h" -#include "northbridge/intel/i945/raminit.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include "dock.h" - -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* X60 GPIO: - * 1: HDD_PRESENCE# - * 6: Unknown (Pulled high by R215 to VCC3B) - * 7: BDC_PRESENCE# - * 8: H8_WAKE# - * 9: RTC_BAT_IN# - * 10: Unknown (Pulled high by R700 to VCC3M) - * 12: H8SCI# - * 13: SLICE_ON_3M# - * 14: Unknown (Pulled high by R321 to VCC3) - * 15: Unknown (Pulled high by R258 to VCC3) - * 19: Unknown (Pulled low by R594) - * 21: Unknown (Pulled high by R145 to VCC3) - * 22: FWH_WP# - * 25: MDC_KILL# - * 33: HDD_PRESENCE_2# - * 35: CLKREQ_SATA# - * 36: PLANARID0 - * 37: PLANARID1 - * 38: PLANARID2 - * 39: PLANARID3 - * 48: FWH_TBL# - */ - - outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfbf6ddfd, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100f2, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00030043, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */ -} - -static void ich7_enable_lpc(void) -{ - // Enable Serial IRQ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); - // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210); - // decode range - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d); - - /* range 0x1600 - 0x167f */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c); - - /* range 0x15e0 - 0x10ef */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c); - - /* range 0x1680 - 0x169f */ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681); - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c); -} - -static void early_superio_config(void) -{ - int timeout = 100000; - device_t dev = PNP_DEV(0x2e, 3); - - pnp_write_config(dev, 0x29, 0x06); - - while (!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) - udelay(1000); - - /* Enable COM1 */ - pnp_set_logical_device(dev); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8); - pnp_set_enable(dev, 1); -} - -static void rcba_config(void) -{ - /* Set up virtual channel 0 */ - RCBA32(0x0014) = 0x80000001; - RCBA32(0x001c) = 0x03128010; - - /* Device 1f interrupt pin register */ - RCBA32(0x3100) = 0x00001230; - RCBA32(0x3108) = 0x40004321; - - /* PCIe Interrupts */ - RCBA32(0x310c) = 0x00004321; - /* HD Audio Interrupt */ - RCBA32(0x3110) = 0x00000002; - - /* dev irq route register */ - RCBA16(0x3140) = 0x1007; - RCBA16(0x3142) = 0x0076; - RCBA16(0x3144) = 0x3210; - RCBA16(0x3146) = 0x7654; - RCBA16(0x3148) = 0x0010; - - /* Enable IOAPIC */ - RCBA8(0x31ff) = 0x03; - - /* Enable upper 128bytes of CMOS */ - RCBA32(0x3400) = (1 << 2); - - /* Disable unused devices */ - RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. - - /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ - RCBA32(0x1e84) = 0x00020001; - RCBA32(0x1e80) = 0x0000fe01; - - /* Set up I/O Trap #3 for 0x800-0x80c (Trap) */ - RCBA32(0x1e9c) = 0x000200f0; - RCBA32(0x1e98) = 0x000c0801; -} - -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - RCBA32(0x0088) = 0x0011d000; - RCBA16(0x01fc) = 0x060f; - RCBA32(0x01f4) = 0x86000040; - RCBA32(0x0214) = 0x10030549; - RCBA32(0x0218) = 0x00020504; - RCBA8(0x0220) = 0xc5; - reg32 = RCBA32(0x3410); - reg32 |= (1 << 6); - RCBA32(0x3410) = reg32; - reg32 = RCBA32(0x3430); - reg32 &= ~(3 << 0); - reg32 |= (1 << 0); - RCBA32(0x3430) = reg32; - RCBA32(0x3418) |= (1 << 0); - RCBA16(0x0200) = 0x2008; - RCBA8(0x2027) = 0x0d; - RCBA16(0x3e08) |= (1 << 7); - RCBA16(0x3e48) |= (1 << 7); - RCBA32(0x3e0e) |= (1 << 7); - RCBA32(0x3e4e) |= (1 << 7); - - // next step only on ich7m b0 and later: - reg32 = RCBA32(0x2034); - reg32 &= ~(0x0f << 16); - reg32 |= (5 << 16); - RCBA32(0x2034) = reg32; -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 reg32; - int boot_mode = 0; - int cbmem_was_initted; - const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 }; - - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - /* Force PCIRST# */ - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR); - udelay(200 * 1000); - pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0); - - ich7_enable_lpc(); - - dlpc_init(); - /* dock_init initializes the DLPC switch on - * thinpad side, so this is required even - * if we're undocked. - */ - if (dock_present()) { - dock_connect(); - early_superio_config(); - } - - /* Set up the console */ - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, - "Soft reset detected, rebooting properly.\n"); - outb(0x6, 0xcf9); - while (1) - asm("hlt"); - } - - /* Perform some early chipset initialization required - * before RAM initialization can work - */ - i945_early_initialization(); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } else { - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); - } - } - - /* Enable SPD ROMs and DDR-II DRAM */ - enable_smbus(); - -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 - dump_spd_registers(); -#endif - - timestamp_add_now(TS_BEFORE_INITRAM); - sdram_initialize(boot_mode, spd_addrmap); - timestamp_add_now(TS_AFTER_INITRAM); - - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - /* Chipset Errata! */ - fixup_i945_errata(); - - /* Initialize the internal PCIe links before we go into stage2 */ - i945_late_initialization(); - - MCHBAR16(SSKPD) = 0xCAFE; - - cbmem_was_initted = !cbmem_recovery(boot_mode==2); - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if ((boot_mode == 2) && cbmem_was_initted) { - void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, - SKPAD_ACPI_S3_MAGIC); - } -#endif - - timestamp_add_now(TS_END_ROMSTAGE); - -} diff --git a/src/mainboard/lenovo/x60/smi.h b/src/mainboard/lenovo/x60/smi.h deleted file mode 100644 index c5f48a1..0000000 --- a/src/mainboard/lenovo/x60/smi.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MAINBOARD_LENOVO_X60_SMI_H -#define MAINBOARD_LENOVO_X60_SMI_H - -#define SMI_DOCK_CONNECT 0x01 -#define SMI_DOCK_DISCONNECT 0x02 -#define SMI_SAVE_CMOS 0x03 - -#endif diff --git a/src/mainboard/lenovo/x60/smihandler.c b/src/mainboard/lenovo/x60/smihandler.c deleted file mode 100644 index 090f037..0000000 --- a/src/mainboard/lenovo/x60/smihandler.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/i82801gx/nvs.h" -#include "southbridge/intel/i82801gx/i82801gx.h" -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <ec/lenovo/h8/h8.h> -#include <delay.h> -#include "dock.h" -#include "smi.h" - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); - /* Enable 0x1600/0x1600 register pair */ - ec_set_bit(0x00, 0x05); -} - -static void mainboard_smi_save_cmos(void) -{ - u8 val; - u8 tmp70, tmp72; - - tmp70 = inb(0x70); - tmp72 = inb(0x72); - - val = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4); - set_option("tft_brightness", &val); - val = ec_read(H8_VOLUME_CONTROL); - set_option("volume", &val); - - outb(tmp70, 0x70); - outb(tmp72, 0x72); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - case SMI_DOCK_CONNECT: - ec_clr_bit(0x03, 2); - udelay(250000); - if (!dock_connect()) { - ec_set_bit(0x03, 2); - /* set dock LED to indicate status */ - ec_write(0x0c, 0x09); - ec_write(0x0c, 0x88); - } else { - /* blink dock LED to indicate failure */ - ec_write(0x0c, 0x08); - ec_write(0x0c, 0xc9); - } - break; - - case SMI_DOCK_DISCONNECT: - ec_clr_bit(0x03, 2); - dock_disconnect(); - break; - - case SMI_SAVE_CMOS: - mainboard_smi_save_cmos(); - break; - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -static void mainboard_smi_brightness_up(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) < 0xf0) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value + 0x10) | 0xf); -} - -static void mainboard_smi_brightness_down(void) -{ - u8 value; - - if ((value = pci_read_config8(PCI_DEV(0, 2, 1), 0xf4)) > 0x10) - pci_write_config8(PCI_DEV(0, 2, 1), 0xf4, (value - 0x10) & 0xf0); -} - -static void mainboard_smi_handle_ec_sci(void) -{ - u8 status = inb(EC_SC); - u8 event; - - if (!(status & EC_SCI_EVT)) - return; - - event = ec_query(); - printk(BIOS_DEBUG, "EC event %02x\n", event); - - switch(event) { - /* brightness up */ - case 0x14: - mainboard_smi_brightness_up(); - mainboard_smi_save_cmos(); - break; - /* brightness down */ - case 0x15: - mainboard_smi_brightness_down(); - mainboard_smi_save_cmos(); - break; - /* Fn-F9 key */ - case 0x18: - /* Power loss */ - case 0x27: - /* Undock Key */ - case 0x50: - mainboard_io_trap_handler(SMI_DOCK_DISCONNECT); - break; - /* Dock Event */ - case 0x37: - case 0x58: - mainboard_io_trap_handler(SMI_DOCK_CONNECT); - break; - default: - break; - } -} - -void mainboard_smi_gpi(u32 gpi) -{ - if (gpi & (1 << 12)) - mainboard_smi_handle_ec_sci(); -} - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, data); - - if (!pmbase) - return 0; - - switch(data) { - case APM_CNT_ACPI_ENABLE: - /* use 0x1600/0x1604 to prevent races with userspace */ - ec_set_ports(0x1604, 0x1600); - /* route H8SCI to SCI */ - outw(inw(ALT_GP_SMI_EN) & ~0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - case APM_CNT_ACPI_DISABLE: - /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't - provide a EC query function */ - ec_set_ports(0x66, 0x62); - /* route H8SCI# to SMI */ - outw(inw(pmbase + ALT_GP_SMI_EN) | 0x1000, pmbase + ALT_GP_SMI_EN); - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - /* discard all events, and enable attention */ - ec_write(0x80, 0x01); - break; - default: - break; - } - return 0; -} diff --git a/src/mainboard/linutop/Kconfig b/src/mainboard/linutop/Kconfig index 75b657a..7b88797 100644 --- a/src/mainboard/linutop/Kconfig +++ b/src/mainboard/linutop/Kconfig @@ -3,7 +3,7 @@ if VENDOR_LINUTOP choice prompt "Mainboard model"
-config BOARD_LINUTOP_LINUTOP1 +config BOARD_LINUTOP_LINUTOP_1 bool "Linutop-1"
endchoice @@ -12,6 +12,6 @@ config MAINBOARD_VENDOR string default "Linutop"
-source "src/mainboard/linutop/linutop1/Kconfig" +source "src/mainboard/linutop/linutop_1/Kconfig"
endif # VENDOR_LINUTOP diff --git a/src/mainboard/linutop/linutop1/Kconfig b/src/mainboard/linutop/linutop1/Kconfig deleted file mode 100644 index c8f9a24..0000000 --- a/src/mainboard/linutop/linutop1/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_LINUTOP_LINUTOP1 - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "Linutop-1" - -endif diff --git a/src/mainboard/linutop/linutop1/board_info.txt b/src/mainboard/linutop/linutop1/board_info.txt deleted file mode 100644 index 9b630eb..0000000 --- a/src/mainboard/linutop/linutop1/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: settop -Board URL: http://www.linutop.com -Flashrom support: y -Clone of: artec_group/dbe61 diff --git a/src/mainboard/linutop/linutop_1/Kconfig b/src/mainboard/linutop/linutop_1/Kconfig new file mode 100644 index 0000000..1e4ed4d --- /dev/null +++ b/src/mainboard/linutop/linutop_1/Kconfig @@ -0,0 +1,9 @@ +if BOARD_LINUTOP_LINUTOP_1 + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "Linutop-1" + +endif diff --git a/src/mainboard/linutop/linutop_1/board_info.txt b/src/mainboard/linutop/linutop_1/board_info.txt new file mode 100644 index 0000000..9b630eb --- /dev/null +++ b/src/mainboard/linutop/linutop_1/board_info.txt @@ -0,0 +1,4 @@ +Category: settop +Board URL: http://www.linutop.com +Flashrom support: y +Clone of: artec_group/dbe61 diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig index 5d69aae..87aa8f8 100644 --- a/src/mainboard/lippert/Kconfig +++ b/src/mainboard/lippert/Kconfig @@ -5,7 +5,7 @@ comment "was acquired by ADLINK" choice prompt "Mainboard model"
-config BOARD_LIPPERT_FRONTRUNNER +config BOARD_LIPPERT_COOL_FRONTRUNNER bool "Cool FrontRunner" config BOARD_LIPPERT_FRONTRUNNER_AF bool "FrontRunner-AF aka ADLINK CoreModule2-GF" @@ -22,13 +22,13 @@ config BOARD_LIPPERT_TOUCAN_AF
endchoice
-source "src/mainboard/lippert/frontrunner/Kconfig" -source "src/mainboard/lippert/frontrunner-af/Kconfig" -source "src/mainboard/lippert/hurricane-lx/Kconfig" -source "src/mainboard/lippert/literunner-lx/Kconfig" -source "src/mainboard/lippert/roadrunner-lx/Kconfig" -source "src/mainboard/lippert/spacerunner-lx/Kconfig" -source "src/mainboard/lippert/toucan-af/Kconfig" +source "src/mainboard/lippert/cool_frontrunner/Kconfig" +source "src/mainboard/lippert/frontrunner_af/Kconfig" +source "src/mainboard/lippert/hurricane_lx/Kconfig" +source "src/mainboard/lippert/cool_literunner_lx/Kconfig" +source "src/mainboard/lippert/cool_roadrunner_lx/Kconfig" +source "src/mainboard/lippert/cool_spacerunner_lx/Kconfig" +source "src/mainboard/lippert/toucan_af/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/lippert/cool_frontrunner/Kconfig b/src/mainboard/lippert/cool_frontrunner/Kconfig new file mode 100644 index 0000000..2de0f32 --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/Kconfig @@ -0,0 +1,27 @@ +if BOARD_LIPPERT_COOL_FRONTRUNNER + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_GX2 + select NORTHBRIDGE_AMD_GX2 + select SOUTHBRIDGE_AMD_CS5535 + select SUPERIO_WINBOND_W83627HF + select HAVE_DEBUG_SMBUS + select UDELAY_TSC + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_256 + select GX2_PROCESSOR_MHZ_366 + +config MAINBOARD_DIR + string + default lippert/cool_frontrunner + +config MAINBOARD_PART_NUMBER + string + default "Cool Frontrunner" + +config IRQ_SLOT_COUNT + int + default 2 + +endif # BOARD_LIPPERT_COOL_FRONTRUNNER diff --git a/src/mainboard/lippert/cool_frontrunner/board_info.txt b/src/mainboard/lippert/cool_frontrunner/board_info.txt new file mode 100644 index 0000000..a2b2d9f --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/board_info.txt @@ -0,0 +1,5 @@ +Category: half +Board URL: http://www.lippertembedded.com/en/productoverview/products-in-detail/85-lipp... +ROM package: PLCC +ROM protocol: FWH +ROM socketed: y diff --git a/src/mainboard/lippert/cool_frontrunner/cmos.layout b/src/mainboard/lippert/cool_frontrunner/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/lippert/cool_frontrunner/devicetree.cb b/src/mainboard/lippert/cool_frontrunner/devicetree.cb new file mode 100644 index 0000000..78d099a --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/devicetree.cb @@ -0,0 +1,21 @@ +chip northbridge/amd/gx2 + device cpu_cluster 0 on + chip cpu/amd/geode_gx2 + device lapic 0 on end + end + end + + device domain 0 on + device pci 0.0 on end + chip southbridge/amd/cs5535 + register "setupflash" = "0" + device pci 12.0 on + device pci 12.1 off end # SMI + device pci 12.2 on end # IDE + device pci 12.3 off end # Audio + device pci 12.4 off end # VGA + end + end + end +end + diff --git a/src/mainboard/lippert/cool_frontrunner/irq_tables.c b/src/mainboard/lippert/cool_frontrunner/irq_tables.c new file mode 100644 index 0000000..5c045cc --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/irq_tables.c @@ -0,0 +1,49 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 5 +#define PIRQC 10 +#define PIRQD 10 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0x800, /* IRQs devoted exclusively to PCI usage */ + 0x1078, /* Vendor */ + 0x2, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lippert/cool_frontrunner/romstage.c b/src/mainboard/lippert/cool_frontrunner/romstage.c new file mode 100644 index 0000000..81642a1 --- /dev/null +++ b/src/mainboard/lippert/cool_frontrunner/romstage.c @@ -0,0 +1,130 @@ +#include <stdint.h> +#include <spd.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/gx2def.h> +#include "southbridge/amd/cs5535/cs5535.h" +#include "southbridge/amd/cs5535/early_smbus.c" +#include "southbridge/amd/cs5535/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static const unsigned char spdbytes[] = { /* 4x Qimonda HYB25DC512160CF-6 */ + 0xFF, 0xFF, /* only values used by raminit.c are set */ + [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, /* (Fundamental) memory type */ + [SPD_NUM_ROWS] = 0x0D, /* Number of row address bits [13] */ + [SPD_NUM_COLUMNS] = 0x0A, /* Number of column address bits [10] */ + [SPD_NUM_DIMM_BANKS] = 1, /* Number of module rows (banks) */ + 0xFF, 0xFF, 0xFF, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x60, /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [6.0 ns in BCD] */ + 0xFF, 0xFF, + [SPD_REFRESH] = 0x82, /* Refresh rate/type [Self Refresh, 7.8 us] */ + [SPD_PRIMARY_SDRAM_WIDTH] = 64, /* SDRAM width (primary SDRAM) [64 bits] */ + 0xFF, 0xFF, 0xFF, + [SPD_NUM_BANKS_PER_SDRAM] = 4, /* SDRAM device attributes, number of banks on SDRAM device */ + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, /* SDRAM device attributes, CAS latency [3, 2.5, 2] */ + 0xFF, 0xFF, + [SPD_MODULE_ATTRIBUTES] = 0x20, /* SDRAM module attributes [differential clk] */ + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, /* SDRAM device attributes, general [Concurrent AP] */ + [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, /* SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] */ + 0xFF, + [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, /* SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] */ + 0xFF, + [SPD_tRP] = 72, /* Min. row precharge time [18 ns in units of 0.25 ns] */ + [SPD_tRRD] = 48, /* Min. row active to row active [12 ns in units of 0.25 ns] */ + [SPD_tRCD] = 72, /* Min. RAS to CAS delay [18 ns in units of 0.25 ns] */ + [SPD_tRAS] = 42, /* Min. RAS pulse width = active to precharge delay [42 ns] */ + [SPD_BANK_DENSITY] = 0x40, /* Density of each row on module [256 MB] */ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + [SPD_tRFC] = 72 /* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [72 ns] */ +}; + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + +#if CONFIG_DEBUG_SMBUS + if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { + print_err("ERROR: spd_read_byte(DIMM0, 0x"); + print_err_hex8(address); + print_err(") returns 0xff\n"); + } +#endif + + /* Fake SPD ROM value */ + return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; +} + +#include "northbridge/amd/gx2/raminit.h" +#include "northbridge/amd/gx2/pll_reset.c" +#include "northbridge/amd/gx2/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_gx2/cpureginit.c" +#include "cpu/amd/geode_gx2/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl [] = { + {.channel0 = {DIMM0, DIMM1}} + }; + unsigned char temp; + + SystemPreInit(); + msr_init(); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + cs5535_early_setup(); + print_err("done cs5535 early\n"); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + print_err("done pll_reset\n"); + + cpuRegInit(); + print_err("done cpuRegInit\n"); + + sdram_initialize(1, memctrl); + + print_err("Done sdram_initialize\n"); + print_err("Disable watchdog\n"); + outb( 0x87, 0x4E); //enter SuperIO configuration mode + outb( 0x87, 0x4E); + + outb(0x20, 0x4e); + temp = inb(0x4f); + print_debug_hex8(temp); + if (temp != 0x52){ + print_err("CAN NOT READ SUPERIO VID\n"); + } + + outb(0x29, 0x4e); + outb(0x7c, 0x4f); + + outb( 0x07, 0x4E); //enable logical device 9 + outb( 0x09, 0x4F); + outb(0x30, 0x4e); + outb(1, 0x4f); + outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019 + outb( 0xC7, 0x4F); + outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables + temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! + print_debug_hex8(temp);print_debug(":"); + temp = temp & ~8; + outb( temp, 0x4F); + temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! + print_debug_hex8(temp);print_debug("\n"); +} diff --git a/src/mainboard/lippert/cool_literunner_lx/Kconfig b/src/mainboard/lippert/cool_literunner_lx/Kconfig new file mode 100644 index 0000000..dfd69e1 --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/Kconfig @@ -0,0 +1,50 @@ +if BOARD_LIPPERT_LITERUNNER_LX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_ITE_IT8712F + select HAVE_DEBUG_SMBUS + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + # Board is equipped with a 1 MB SPI flash, however, due to limitations + # of the IT8712F Super I/O, only the top 512 KB are directly mapped. + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_400 + +config MAINBOARD_DIR + string + default lippert/cool_literunner_lx + +config MAINBOARD_PART_NUMBER + string + default "Cool LiteRunner-LX" + +config IRQ_SLOT_COUNT + int + default 5 + +config ONBOARD_UARTS_RS485 + bool "Switch on-board serial ports 1 & 2 to RS485" + default n + help + If selected, the first two on-board serial ports will operate in RS485 + mode instead of RS232. + +config ONBOARD_IDE_SLAVE + bool "Make on-board CF socket act as Slave" + default n + help + If selected, the on-board Compact Flash card socket will act as IDE + Slave instead of Master. + +config PLLMSRlo + hex + default 0x00de6001 + +endif # BOARD_LIPPERT_LITERUNNER_LX diff --git a/src/mainboard/lippert/cool_literunner_lx/board_info.txt b/src/mainboard/lippert/cool_literunner_lx/board_info.txt new file mode 100644 index 0000000..47b90b5 --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1128 +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lippert/cool_literunner_lx/devicetree.cb b/src/mainboard/lippert/cool_literunner_lx/devicetree.cb new file mode 100644 index 0000000..834f109 --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/devicetree.cb @@ -0,0 +1,87 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x0000129A" # 00010010 10011010 + register "lpc_serirq_polarity" = "0x0000ED65" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "1" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 8.0 on end # Ethernet 2 + device pci c.0 on end # IT8888 + device pci d.0 on end # Mini-PCI + device pci e.0 on end # Ethernet 1 + device pci f.0 on # ISA Bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 # Simple I/O + io 0x64 = 0x1228 # SPI + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/lippert/cool_literunner_lx/irq_tables.c b/src/mainboard/lippert/cool_literunner_lx/irq_tables.c new file mode 100644 index 0000000..0de7919 --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/irq_tables.c @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 5 +#define PIRQD 15 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0xB8, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 1 */ + {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 2 */ + {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x1, 0x0}, /* Mini-PCI */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lippert/cool_literunner_lx/mainboard.c b/src/mainboard/lippert/cool_literunner_lx/mainboard.c new file mode 100644 index 0000000..368665e --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/mainboard.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ +#if CONFIG_ONBOARD_UARTS_RS485 + #define SIO_GP1X_CONFIG 0x07 +#else + #define SIO_GP1X_CONFIG 0x01 +#endif + +/* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ +#define SIO_GP2X_CONFIG 0x00 + +static const u16 ec_init_table[] = { /* hi=data, lo=index */ + 0x1900, /* Enable monitoring */ + 0x3050, /* VIN4,5 enabled */ + 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ + 0x805C, /* Unlock zero adjust */ + 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ + 0x005C, /* Lock zero adjust */ + 0xD014 /* Also set FAN_CTL polarity to Active High */ +}; + +static void init(struct device *dev) +{ + unsigned int gpio_base, i; + printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX ENTER %s\n", __func__); + + /* Init CS5536 GPIOs */ + gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; + + outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# + outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# + outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# + outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz + outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz + outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz + + /* Init Environment Controller. */ + for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { + u16 val = ec_init_table[i]; + outb((u8)val, 0x0295); + outb(val >> 8, 0x0296); + } + + /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ + outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ + /* bit1 = COM3_RX_EN, bit0 = COM3_TX_EN */ + outb(SIO_GP2X_CONFIG, 0x1221); /* Simple-I/O GP27-20 */ + + printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/cool_literunner_lx/romstage.c b/src/mainboard/lippert/cool_literunner_lx/romstage.c new file mode 100644 index 0000000..6839332 --- /dev/null +++ b/src/mainboard/lippert/cool_literunner_lx/romstage.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from the SpaceRunner-LX mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <spd.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +/* Bit0 enables Spread Spectrum, bit1 makes on-board CF slot act as IDE slave. */ +#if CONFIG_ONBOARD_IDE_SLAVE + #define SMC_CONFIG 0x03 +#else + #define SMC_CONFIG 0x01 +#endif + +static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I + 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set + [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type + [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] + [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] + [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) + 0xFF, 0xFF, 0xFF, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] + 0xFF, 0xFF, + [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] + [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] + 0xFF, 0xFF, 0xFF, + [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] + 0xFF, 0xFF, + [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] + [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] + 0xFF, + [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] + 0xFF, + [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] + [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] + [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] + [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] + [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] +}; + +int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + +#if CONFIG_DEBUG_SMBUS + if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { + print_err("ERROR: spd_read_byte(DIMM0, 0x"); + print_err_hex8(address); + print_err(") returns 0xff\n"); + } +#endif + + /* Fake SPD ROM value */ + return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; +} + +/* Send config data to System Management Controller via SMB. */ +static int smc_send_config(unsigned char config_data) +{ + if (smbus_check_stop_condition(SMBUS_IO_BASE)) + return 1; + if (smbus_start_condition(SMBUS_IO_BASE)) + return 2; + if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address + return 3; + if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data + return 4; + if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length + return 5; + if (smbus_send_command(SMBUS_IO_BASE, config_data)) + return 6; + smbus_stop_condition(SMBUS_IO_BASE); + return 0; +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +static const u16 sio_init_table[] = { // hi=data, lo=index + 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal + 0x1423, // don't delay PoWeROK1/2 + 0x9072, // watchdog triggers PWROK, counts seconds +#if !CONFIG_USE_WATCHDOG_ON_BOOT + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 +#endif + 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins + 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN + 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED + 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN + 0xFFC2, // enable Simple-I/O for GP37-30 + 0x07C8, // config GP12-10 as output + 0x03C9, // config GP21-20 as output + 0x2DF5, // map Hw Monitor Thermal Output to GP55 + 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) +}; + +/* Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + int i; + + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 reg = sio_init_table[i]; + ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); + } +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int err; + + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* + * Note: Must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + mb_gpio_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ + if ((err = smc_send_config(SMC_CONFIG))) { + print_err("ERROR "); + print_err_char('0'+err); + print_err(" sending config data to SMC\n"); + } + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ +} diff --git a/src/mainboard/lippert/cool_roadrunner_lx/Kconfig b/src/mainboard/lippert/cool_roadrunner_lx/Kconfig new file mode 100644 index 0000000..bac1178 --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/Kconfig @@ -0,0 +1,42 @@ +if BOARD_LIPPERT_ROADRUNNER_LX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_ITE_IT8712F + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + # Standard chip is a 512 KB FWH. Replacing it with a 1 MB + # SST 49LF008A is possible. + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_333 + +config MAINBOARD_DIR + string + default lippert/cool_roadrunner_lx + +config MAINBOARD_PART_NUMBER + string + default "Cool RoadRunner-LX" + +config IRQ_SLOT_COUNT + int + default 7 + +config ONBOARD_UARTS_RS485 + bool "Switch on-board serial ports to RS485" + default n + help + If selected, both on-board serial ports will operate in RS485 mode + instead of RS232. + +config PLLMSRlo + hex + default 0x00de6001 + +endif # BOARD_LIPPERT_ROADRUNNER_LX diff --git a/src/mainboard/lippert/cool_roadrunner_lx/board_info.txt b/src/mainboard/lippert/cool_roadrunner_lx/board_info.txt new file mode 100644 index 0000000..fc48fcd --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1147 +ROM package: PLCC +ROM protocol: FWH +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/lippert/cool_roadrunner_lx/devicetree.cb b/src/mainboard/lippert/cool_roadrunner_lx/devicetree.cb new file mode 100644 index 0000000..f823681 --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/devicetree.cb @@ -0,0 +1,89 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 # Southbridge + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 # Simple I/O + # io 0x64 = 0x1228 # SPI + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/lippert/cool_roadrunner_lx/irq_tables.c b/src/mainboard/lippert/cool_roadrunner_lx/irq_tables.c new file mode 100644 index 0000000..77fc58a --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/irq_tables.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on irq_tables.c from AMD's DB800 mainboard. */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 5 +#define PIRQD 15 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ + {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lippert/cool_roadrunner_lx/mainboard.c b/src/mainboard/lippert/cool_roadrunner_lx/mainboard.c new file mode 100644 index 0000000..b8c7e4a --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/mainboard.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on mainboard.c from AMD's DB800 mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */ +#if CONFIG_ONBOARD_UARTS_RS485 + #define SIO_GP1X_CONFIG 0x26 +#else + #define SIO_GP1X_CONFIG 0x20 +#endif + +static const u16 ec_init_table[] = { /* hi=data, lo=index */ + 0x1900, /* Enable monitoring */ + 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ + 0x805C, /* Unlock zero adjust */ + 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ + 0x005C, /* Lock zero adjust */ + 0xD014 /* Also set FAN_CTL polarity to Active High */ +}; + +static void init(struct device *dev) +{ + unsigned int gpio_base, i; + printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__); + + /* Init CS5536 GPIOs. */ + gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; + + outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# + outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# + outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# + outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED + + /* Init Environment Controller. */ + for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { + u16 val = ec_init_table[i]; + outb((u8)val, 0x0295); + outb(val >> 8, 0x0296); + } + + /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */ + outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ + printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/cool_roadrunner_lx/romstage.c b/src/mainboard/lippert/cool_roadrunner_lx/romstage.c new file mode 100644 index 0000000..ef3f7d2 --- /dev/null +++ b/src/mainboard/lippert/cool_roadrunner_lx/romstage.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ + +#include <stdlib.h> +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include <spd.h> +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +static const u16 sio_init_table[] = { // hi=data, lo=index + 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal + 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset + 0x9072, // watchdog triggers PWROK, counts seconds +#if !CONFIG_USE_WATCHDOG_ON_BOOT + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 +#endif + 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins + 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) + 0x46B8, 0x0CB9, // enable pullups on RS485_EN + 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 + 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) + 0x26C8, // config GP15,12,11 as output; GP14 as input + 0x2DF5, // map Hw Monitor Thermal Output to GP55 + 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) +}; + +/* Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + int i; + + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 reg = sio_init_table[i]; + ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); + } +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* + * Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + mb_gpio_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ +} diff --git a/src/mainboard/lippert/cool_spacerunner_lx/Kconfig b/src/mainboard/lippert/cool_spacerunner_lx/Kconfig new file mode 100644 index 0000000..a01a375 --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/Kconfig @@ -0,0 +1,49 @@ +if BOARD_LIPPERT_SPACERUNNER_LX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_ITE_IT8712F + select HAVE_DEBUG_SMBUS + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + # Board is equipped with a 1 MB SPI flash, however, due to limitations + # of the IT8712F Super I/O, only the top 512 KB are directly mapped. + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_400 + +config MAINBOARD_DIR + string + default lippert/cool_spacerunner_lx + +config MAINBOARD_PART_NUMBER + string + default "Cool SpaceRunner-LX" + +config IRQ_SLOT_COUNT + int + default 7 + +config ONBOARD_UARTS_RS485 + bool "Switch on-board serial ports to RS485" + default n + help + If selected, both on-board serial ports will operate in RS485 mode + instead of RS232. + +config ONBOARD_IDE_SLAVE + bool "Make on-board SSD act as Slave" + default n + help + If selected, the on-board SSD will act as IDE Slave instead of Master. + +config PLLMSRlo + hex + default 0x00de6001 + +endif # BOARD_LIPPERT_SPACERUNNER_LX diff --git a/src/mainboard/lippert/cool_spacerunner_lx/board_info.txt b/src/mainboard/lippert/cool_spacerunner_lx/board_info.txt new file mode 100644 index 0000000..76be510 --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1148 +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lippert/cool_spacerunner_lx/devicetree.cb b/src/mainboard/lippert/cool_spacerunner_lx/devicetree.cb new file mode 100644 index 0000000..8619e84 --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/devicetree.cb @@ -0,0 +1,90 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 + register "unwanted_vpci[1]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci e.0 on end # Ethernet + device pci f.0 on # ISA Bridge + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 # Simple I/O + io 0x64 = 0x1228 # SPI + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE + device pci f.3 off end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/lippert/cool_spacerunner_lx/irq_tables.c b/src/mainboard/lippert/cool_spacerunner_lx/irq_tables.c new file mode 100644 index 0000000..af7df0a --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/irq_tables.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on irq_tables.c from AMD's DB800 mainboard. */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 5 +#define PIRQD 15 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ + {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lippert/cool_spacerunner_lx/mainboard.c b/src/mainboard/lippert/cool_spacerunner_lx/mainboard.c new file mode 100644 index 0000000..a1be78f --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/mainboard.c @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on mainboard.c from AMD's DB800 mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ +#if CONFIG_ONBOARD_UARTS_RS485 + #define SIO_GP1X_CONFIG 0x07 +#else + #define SIO_GP1X_CONFIG 0x01 +#endif + +static const u16 ec_init_table[] = { /* hi=data, lo=index */ + 0x1900, /* Enable monitoring */ + 0x3050, /* VIN4,5 enabled */ + 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ + 0x805C, /* Unlock zero adjust */ + 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ + 0x005C, /* Lock zero adjust */ + 0xD014 /* Also set FAN_CTL polarity to Active High */ +}; + +static void init(struct device *dev) +{ + unsigned int gpio_base, i; + printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__); + + /* Init CS5536 GPIOs */ + gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; + + outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# + outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# + outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# + outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz + outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz + outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz + + /* Init Environment Controller. */ + for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { + u16 val = ec_init_table[i]; + outb((u8)val, 0x0295); + outb(val >> 8, 0x0296); + } + + /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ + outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ + + printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/cool_spacerunner_lx/romstage.c b/src/mainboard/lippert/cool_spacerunner_lx/romstage.c new file mode 100644 index 0000000..f397e37 --- /dev/null +++ b/src/mainboard/lippert/cool_spacerunner_lx/romstage.c @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ + +#include <stdlib.h> +#include <stdint.h> +#include <spd.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */ +#if CONFIG_ONBOARD_IDE_SLAVE + #define SMC_CONFIG 0x03 +#else + #define SMC_CONFIG 0x01 +#endif + +static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I + 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set + [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type + [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] + [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] + [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) + 0xFF, 0xFF, 0xFF, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] + 0xFF, 0xFF, + [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] + [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] + 0xFF, 0xFF, 0xFF, + [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] + 0xFF, 0xFF, + [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] + [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] + 0xFF, + [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] + 0xFF, + [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] + [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] + [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] + [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] + [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] +}; + +int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + +#if CONFIG_DEBUG_SMBUS + if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { + print_err("ERROR: spd_read_byte(DIMM0, 0x"); + print_err_hex8(address); + print_err(") returns 0xff\n"); + } +#endif + + /* Fake SPD ROM value */ + return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; +} + +/* Send config data to System Management Controller via SMB. */ +static int smc_send_config(unsigned char config_data) +{ + if (smbus_check_stop_condition(SMBUS_IO_BASE)) + return 1; + if (smbus_start_condition(SMBUS_IO_BASE)) + return 2; + if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address + return 3; + if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data + return 4; + if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length + return 5; + if (smbus_send_command(SMBUS_IO_BASE, config_data)) + return 6; + smbus_stop_condition(SMBUS_IO_BASE); + return 0; +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +static const u16 sio_init_table[] = { // hi=data, lo=index + 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal + 0x1423, // don't delay PoWeROK1/2 + 0x9072, // watchdog triggers PWROK, counts seconds +#if !CONFIG_USE_WATCHDOG_ON_BOOT + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 +#endif + 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins + 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN + 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED + 0x07C8, // config GP12-10 as output + 0x2DF5, // map Hw Monitor Thermal Output to GP55 + 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) +}; + +/* Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + int i; + + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 reg = sio_init_table[i]; + ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); + } +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + int err; + + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* + * Note: Must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + mb_gpio_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ + if ((err = smc_send_config(SMC_CONFIG))) { + print_err("ERROR "); + print_err_char('0'+err); + print_err(" sending config data to SMC\n"); + } + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ + return; +} diff --git a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c deleted file mode 100644 index 9fc4f74..0000000 --- a/src/mainboard/lippert/frontrunner-af/BiosCallOuts.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "SB800.h" -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include "heapManager.h" -#include <stdlib.h> - -/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? - * - * Dedicated reset is not needed for the on-board Intel I210 GbE controller. - */ - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - MEM_DATA_STRUCT *MemData = ConfigPtr; - - printk(BIOS_INFO, "Setting DDR3 voltage: "); - FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V - switch (MemData->ParameterListPtr->DDR3Voltage) { - case VOLT1_25: // board is not able to provide this - MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry - printk(BIOS_INFO, "can't provide 1.25 V, using "); - // fall through - default: // AGESA.h says in mixed case 1.5V DIMMs get excluded - case VOLT1_35: - FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0 - printk(BIOS_INFO, "1.35 V\n"); - break; - case VOLT1_5: - FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1 - printk(BIOS_INFO, "1.5 V\n"); - } - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/lippert/frontrunner-af/Kconfig b/src/mainboard/lippert/frontrunner-af/Kconfig deleted file mode 100644 index 64c9dd5..0000000 --- a/src/mainboard/lippert/frontrunner-af/Kconfig +++ /dev/null @@ -1,99 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_LIPPERT_FRONTRUNNER_AF - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - # This erases 28 KB and writes 10 KB register dumps to SPI flash on every - # boot, wasting 3 s and causing wear! Therefore disable S3 for now. - #select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default lippert/frontrunner-af - -config MAINBOARD_PART_NUMBER - string - default "FrontRunner-AF" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 2 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -#config VGA_BIOS_FILE -# string "VGA BIOS path and filename" -# depends on VGA_BIOS -# default "rom/video/OntarioGenericVbios.bin" - -config VGA_BIOS_ID - string - default "1002,9802" - -config SB800_AHCI_ROM - bool - default n - -config DRIVERS_PS2_KEYBOARD - bool - default n - -endif # BOARD_LIPPERT_FRONTRUNNER_AF diff --git a/src/mainboard/lippert/frontrunner-af/Makefile.inc b/src/mainboard/lippert/frontrunner-af/Makefile.inc deleted file mode 100644 index 0630008..0000000 --- a/src/mainboard/lippert/frontrunner-af/Makefile.inc +++ /dev/null @@ -1,35 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -ifeq ($(CONFIG_AHCI_BIOS),y) -stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) -cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom -pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) -pci$(stripped_ahcibios_id).rom-type := optionrom -endif - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/lippert/frontrunner-af/OptionsIds.h b/src/mainboard/lippert/frontrunner-af/OptionsIds.h deleted file mode 100644 index cf0a4be..0000000 --- a/src/mainboard/lippert/frontrunner-af/OptionsIds.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c deleted file mode 100644 index c06296f..0000000 --- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcie.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "heapManager.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" - -#include <string.h> - -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - VOID *BrazosPcieComplexListPtr; - VOID *BrazosPciePortPtr; - VOID *BrazosPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - -PCIe_PORT_DESCRIPTOR PortList [] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } -}; - -PCIe_DDI_DESCRIPTOR DdiList [] = { - // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) - { - 0, //Descriptor flags - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - {ConnectorTypeTravisDpToLvds, Aux1, Hdp1} - }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - {ConnectorTypeDP, Aux2, Hdp2} - } -}; - -PCIe_COMPLEX_DESCRIPTOR Brazos = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - - // GNB PCIe topology Porting - - // - // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - // - AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); - return; - } - - BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Brazos); - BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); - memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); - memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); - - - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; -} diff --git a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h deleted file mode 100644 index 02c7f4e..0000000 --- a/src/mainboard/lippert/frontrunner-af/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" -#include <cpu/amd/agesa/s3_resume.h> - -//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 0 //0:Disable 1:Enable -#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 0 //0:Disable 1:Enable -#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable -#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl b/src/mainboard/lippert/frontrunner-af/acpi/routing.asl deleted file mode 100644 index 907b0e4..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/routing.asl +++ /dev/null @@ -1,411 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */ - Package(){0x0004FFFF, 0, 0, 0x14 }, - Package(){0x0004FFFF, 1, 0, 0x15 }, - Package(){0x0004FFFF, 2, 0, 0x16 }, - Package(){0x0004FFFF, 3, 0, 0x17 }, - Package(){0x0005FFFF, 0, 0, 0x15 }, - Package(){0x0005FFFF, 1, 0, 0x16 }, - Package(){0x0005FFFF, 2, 0, 0x17 }, - Package(){0x0005FFFF, 3, 0, 0x14 }, - Package(){0x0006FFFF, 0, 0, 0x16 }, - Package(){0x0006FFFF, 1, 0, 0x17 }, - Package(){0x0006FFFF, 2, 0, 0x14 }, - Package(){0x0006FFFF, 3, 0, 0x15 }, - Package(){0x0007FFFF, 0, 0, 0x17 }, - Package(){0x0007FFFF, 1, 0, 0x14 }, - Package(){0x0007FFFF, 2, 0, 0x15 }, - Package(){0x0007FFFF, 3, 0, 0x16 }, - }) -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/sata.asl b/src/mainboard/lippert/frontrunner-af/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl b/src/mainboard/lippert/frontrunner-af/acpi/superio.asl deleted file mode 100644 index 9be7492..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/superio.asl +++ /dev/null @@ -1,39 +0,0 @@ -/* - * SuperI/O devices - * - * This file is part of the coreboot project. - * - * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH - * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* PS/2 Keyboard */ -Device(KBC) { - Name(_HID, EISAID("PNP0303")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 1, 1) - IO(Decode16, 0x0064, 0x0064, 1, 1) - IRQNoFlags(){1} - }) -} - -/* PS/2 Mouse */ -Device(PS2M) { - Name(_HID, EISAID("PNP0F13")) - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){12} - }) -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi/usb.asl b/src/mainboard/lippert/frontrunner-af/acpi/usb.asl deleted file mode 100644 index 2822ffd..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/lippert/frontrunner-af/acpi_tables.c b/src/mainboard/lippert/frontrunner-af/acpi_tables.c deleted file mode 100644 index 588345e..0000000 --- a/src/mainboard/lippert/frontrunner-af/acpi_tables.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include "agesawrapper.h" -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam14.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *alib; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } - else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } - else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* The DSDT needs additional work for the AGESA SSDT Pstate table */ - /* Keep the comment for a while. */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - } else { - printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); - } - - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); - ssdt2 = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); - current += ssdt2->length; - acpi_add_table(rsdp,ssdt2); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/lippert/frontrunner-af/agesawrapper.c b/src/mainboard/lippert/frontrunner-af/agesawrapper.c deleted file mode 100644 index fc0bee2..0000000 --- a/src/mainboard/lippert/frontrunner-af/agesawrapper.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "PlatformGnbPcieComplex.h" - -#define __SIMPLE_DEVICE__ - -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/mtrr.h> -#include <stdint.h> -#include <string.h> - -#include <cpu/amd/agesa/s3_resume.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#define MMCONF_ENABLE 1 - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - -/*------------------------------------------------------------------------------ - * T Y P E D E F S A N D S T R U C T U R E S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * E X P O R T E D F U N C T I O N S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * L O C A L F U N C T I O N S - *------------------------------------------------------------------------------ - */ -AGESA_STATUS agesawrapper_amdinitcpuio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 - PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - UINT8 BusRangeVal = 0; - UINT8 BusNum; - UINT8 Index; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - - for (Index = 0; Index < 8; Index++) { - BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; - if (BusNum == 1) { - BusRangeVal = Index; - break; - } - } - - MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000ull; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set Ontario Link Data */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); - PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); - PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = NULL; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - PCI_ADDR PciAddress; - UINT32 PciValue; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - /* Write to D1F0x18 */ - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x00010100; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Legacy Bridge Mode - * Modify B1D5F0x18 - */ - PciAddress.Address.Bus = 1; - PciAddress.Address.Device = 5; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Legacy Bridge Mode - * Modify B1D5F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Pcie Mode - * Modify B0D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Pcie Mode - * Modify B0D1F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Base and Limit Address - * Modify B0D1F0x20 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x20; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96009600; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Prefetchable Memory Limit and Base - * Modify B0D1F0x24 - */ - PciAddress.Address.Register = 0x24; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x8FF18001; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS * AmdLateParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; - - printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); - - Status = AmdInitLate (AmdLateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParamsPtr->DmiTable; - AcpiPstate = AmdLateParamsPtr->AcpiPState; - AcpiSrat = AmdLateParamsPtr->AcpiSrat; - AcpiSlit = AmdLateParamsPtr->AcpiSlit; - AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; - AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; - AcpiAlib = AmdLateParamsPtr->AcpiAlib; - - printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" - " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" - " Mce:%p\n Cmc:%p\n Alib:%p\n", - __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, - AcpiWheaMce, AcpiWheaCmc, AcpiAlib); - - /* Don't release the structure until coreboot has copied the ACPI tables. - * AmdReleaseStruct (&AmdLateParams); - */ - - return Status; -} - -AGESA_STATUS agesawrapper_amdinitresume ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amds3laterestore ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_amdS3Save ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - AmdCreateStruct(&AmdInterfaceParams); - - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save (AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage - ); - } - - OemAgesaSaveMtrr(); - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -AGESA_STATUS agesawrapper_amdreadeventlog ( - VOID - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = NULL; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/lippert/frontrunner-af/agesawrapper.h b/src/mainboard/lippert/frontrunner-af/agesawrapper.h deleted file mode 100644 index a74a800..0000000 --- a/src/mainboard/lippert/frontrunner-af/agesawrapper.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); - -AGESA_STATUS agesawrapper_amdreadeventlog(void); - -AGESA_STATUS agesawrapper_amdinitcpuio(void); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -void *agesawrapper_getlateinitptr (int pick); - -#endif diff --git a/src/mainboard/lippert/frontrunner-af/board_info.txt b/src/mainboard/lippert/frontrunner-af/board_info.txt deleted file mode 100644 index 9246cdb..0000000 --- a/src/mainboard/lippert/frontrunner-af/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1277 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lippert/frontrunner-af/buildOpts.c b/src/mainboard/lippert/frontrunner-af/buildOpts.c deleted file mode 100644 index a6e4472..0000000 --- a/src/mainboard/lippert/frontrunner-af/buildOpts.c +++ /dev/null @@ -1,459 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> - -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_SLIT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - -/* - * Agesa entry points used in this implementation. - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE TRUE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO FALSE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include "AGESA.h" -#include "CommonReturns.h" - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ -// This is the delivery package title, "BrazosPI" -// This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - -// This is the release version number of the AGESA component -// This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -//DA Customer table -CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); - -/* *************************************************************************** - * Optional User code to be included into the AGESA build - * These may be 32-bit call-out routines... - */ -//AGESA_STATUS -//AgesaReadSpd ( -// IN UINTN FcnData, -// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd -// ) -//{ -// /* platform code to read an SPD... */ -// return Status; -//} diff --git a/src/mainboard/lippert/frontrunner-af/cmos.layout b/src/mainboard/lippert/frontrunner-af/cmos.layout deleted file mode 100644 index ab65be0..0000000 --- a/src/mainboard/lippert/frontrunner-af/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb deleted file mode 100644 index f77c973..0000000 --- a/src/mainboard/lippert/frontrunner-af/devicetree.cb +++ /dev/null @@ -1,110 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC - device pci 5.0 off end # PCIE P2P bridge - device pci 6.0 off end # PCIE P2P bridge - device pci 7.0 off end # PCIE P2P bridge - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/smsc/smscsuperio - device pnp 4e.0 off end # Floppy - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.A on # Runtime Regs - io 0x60 = 0x0E00 - drq 0xF0 = 0x0B # no 32kHz - end - end # smscsuperio - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 off end # PCIe PortA - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - device pci 18.6 on end - device pci 18.7 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl deleted file mode 100644 index bbd3e4f..0000000 --- a/src/mainboard/lippert/frontrunner-af/dsdt.asl +++ /dev/null @@ -1,1835 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - C000, /* name space name, align with BLDCFG_PROCESSOR_SCOPE_NAME[01] */ - 0, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - - Processor( - C001, /* name space name */ - 1, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - Processor( - C002, /* name space name */ - 2, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - Processor( - C003, /* name space name */ - 3, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ - Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - /* Operating System Capabilities Method */ - Method(_OSC,4) - { /* Check for proper PCI/PCIe UUID */ - If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - } - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - #include "acpi/superio.asl" - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - /* Set the Bus number and Secondary Bus number for the PCI0 device - * The Secondary bus range for PCI0 lets the system - * know what bus values are allowed on the downstream - * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which - * range from [0-0xFF] but they do not need to be - * sequential. - */ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x00FF, /* range maximum */ - 0x0000, /* translation */ - 0x0100, /* length */ - ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ - - IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ - IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */ - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ -#if 0 - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/lippert/frontrunner-af/irq_tables.c b/src/mainboard/lippert/frontrunner-af/irq_tables.c deleted file mode 100644 index 12a64a8..0000000 --- a/src/mainboard/lippert/frontrunner-af/irq_tables.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam14.h> - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - - - slot_num++; - - - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/lippert/frontrunner-af/mainboard.c b/src/mainboard/lippert/frontrunner-af/mainboard.c deleted file mode 100644 index ee538c3..0000000 --- a/src/mainboard/lippert/frontrunner-af/mainboard.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdlib.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb800/sb800.h> -#include <arch/acpi.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/amd/mtrr.h> -#include "SBPLATFORM.h" -#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ -#include <southbridge/amd/cimx/sb800/gpio_oem.h> - -/* Init SIO GPIOs. */ -#define SIO_RUNTIME_BASE 0x0E00 -static const u16 sio_init_table[] = { // hi=offset, lo=value - 0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200 - 0x2300, // GP10: COM1 termination = push/pull output - 0x2400, // GP11: COM2 termination = push/pull output - 0x2500, // GP12: COM1 RS485 mode = push/pull output - 0x2600, // GP13: COM2 RS485 mode = push/pull output - 0x2700, // GP14: COM1 speed A = push/pull output - 0x2900, // GP15: COM1 speed B = push/pull output - 0x2A00, // GP16: COM2 speed A = push/pull output - 0x2B00, // GP17: COM2 speed B = push/pull output - - 0x3904, // GP36 = KBDRST# function - - 0x4E74, // GP4x: Ethernet enable = on - 0x6E84, // GP44: Ethernet enable = open drain output - - // GP5x = COM2 function instead of GPIO - 0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604, - - 0x470C, // GP60 = WDT function - 0x5E00, // LED2: Live LED = off - 0x4884, // GP61: Live LED = LED2 function - - 0x5038, // GP6x: USB power = 3x on - 0x5580, // GP63: USB power 0/1 = open drain output - 0x5680, // GP64: USB power 2/3 = open drain output - 0x5780, // GP65: USB power 4/5 = open drain output -}; - -/* Write data block to slave on SMBUS0. */ -#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) -#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) -#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) -#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) -#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) -#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) -static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) -{ - __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out - __outbyte(SMB0_HOSTCMD, command); // or destination offset - __outbyte(SMB0_DATA0, length); // sent before data - __inbyte(SMB0_CONTROL); // reset block data array - while (length--) - __outbyte(SMB0_BLOCKDATA, *(data++)); - __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ - - while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors - return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors -} - -static void init(struct device *dev) -{ - volatile u8 *spi_base; // base addr of Hudson's SPI host controller - int i; - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); - - /* Init Hudson GPIOs. */ - printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU) - FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX( 57) = 1; - FCH_GPIO ( 57) = 0x28; - FCH_IOMUX( 58) = 1; - FCH_GPIO ( 58) = 0x28; - FCH_IOMUX( 96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU) - FCH_IOMUX( 52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector - FCH_IOMUX( 61) = 2; // default to inputs with int. PU - FCH_IOMUX( 62) = 2; - FCH_IOMUX(187) = 2; - FCH_IOMUX(188) = 2; - FCH_IOMUX(189) = 1; - FCH_IOMUX(190) = 1; - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares - printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); - printk(BIOS_INFO, "Board revision ID: %u\n", - fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); - - /* Init SIO GPIOs. */ - printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE); - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 val = sio_init_table[i]; - outb((u8)val, SIO_RUNTIME_BASE + (val >> 8)); - } - - /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ - spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register - - /* Notify the SMC we're alive and kicking, or after a while it will - * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. */ - printk(BIOS_INFO, "Sending BIOS alive message\n"); - const u8 i_am_alive[] = { 0x03 }; - if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) - printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); - - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); -} - -void set_pcie_reset(void); -void set_pcie_dereset(void); - -/** - * TODO - * SB CIMx callback - */ -void set_pcie_reset(void) -{ -} - -/** - * TODO - * mainboard specific SB CIMx callback - */ -void set_pcie_dereset(void) -{ -} - - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - dev->ops->init = init; - - /* enable GPP CLK0 */ - /* disable GPP CLK1 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - *(misc_mem_clk_cntrl + 0) = 0x0F; - *(misc_mem_clk_cntrl + 1) = 0x00; - *(misc_mem_clk_cntrl + 2) = 0x00; - *(misc_mem_clk_cntrl + 3) = 0x00; - *(misc_mem_clk_cntrl + 4) = 0x00; - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_iowrite(0x29, 0x80); - pm_iowrite(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/frontrunner-af/mptable.c b/src/mainboard/lippert/frontrunner-af/mptable.c deleted file mode 100644 index 078601e..0000000 --- a/src/mainboard/lippert/frontrunner-af/mptable.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam14.h> -#include <SBPLATFORM.h> - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lippert/frontrunner-af/platform_cfg.h b/src/mainboard/lippert/frontrunner-af/platform_cfg.h deleted file mode 100644 index 03146d0..0000000 --- a/src/mainboard/lippert/frontrunner-af/platform_cfg.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x3F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#define AZALIA_SDIN_PIN 0x02 - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_DISABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 1 - -static const CODECENTRY frontrunneraf_codec_alc886[] = /* Realtek ALC886/8 */ -{ - /* NID, PinConfig (Verbs 71F..C) */ - {0x11, 0x411111F0}, /* NPC */ - {0x12, 0x411111F0}, /* DMIC */ - {0x14, 0x01214110}, /* FRONT (Port-D) */ - {0x15, 0x01011112}, /* SURR (Port-A) */ - {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ - {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ - {0x18, 0x01A19930}, /* MIC1 (Port-B) */ - {0x19, 0x411111F0}, /* MIC2 (Port-F) */ - {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ - {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ - {0x1C, 0x411111F0}, /* CD-IN */ - {0x1D, 0x40132601}, /* BEEP-IN */ - {0x1E, 0x01441120}, /* S/PDIF-OUT */ - {0x1F, 0x01C46140}, /* S/PDIF-IN */ - {0xff, 0xffffffff} /* end of table */ -}; - -static const CODECTBLLIST codec_tablelist[] = -{ - {0x10ec0888, (CODECENTRY*)&frontrunneraf_codec_alc886[0]}, - {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -/* set up an ACPI preferred power management profile */ -/* from acpi.h - * PM_UNSPECIFIED = 0, - * PM_DESKTOP = 1, - * PM_MOBILE = 2, - * PM_WORKSTATION = 3, - * PM_ENTERPRISE_SERVER = 4, - * PM_SOHO_SERVER = 5, - * PM_APPLIANCE_PC = 6, - * PM_PERFORMANCE_SERVER = 7, - * PM_TABLET = 8 - */ -#define FADT_PM_PROFILE 1 - -#endif diff --git a/src/mainboard/lippert/frontrunner-af/romstage.c b/src/mainboard/lippert/frontrunner-af/romstage.c deleted file mode 100644 index 61fd6bd..0000000 --- a/src/mainboard/lippert/frontrunner-af/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include <cpu/x86/mtrr.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include "cpu/x86/lapic.h" -#include <cpu/x86/cache.h> -#include <sb_cimx.h> -#include "SBPLATFORM.h" -#include "cbmem.h" -#include "cpu/amd/mtrr.h" -#include "cpu/amd/agesa/s3_resume.h" - - -#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* - * All cores: allow caching of flash chip code and data - * (there are no cache-as-ram reliability concerns with family 14h) - */ - __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); - __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); - - /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ - __writemsr (0xc0010062, 0); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - sb_Poweron_Init(); - - post_code(0x31); - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x35); - AGESAWRAPPER(amdinitmmio); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - /* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all - * hang, looks like DRAM re-init goes wrong, don't know why. */ - val = AGESAWRAPPER(amdinitpost); - if (val == 7) /* fatal, amdinitenv below is going to hang */ - outb(0x06, 0x0cf9); /* reset system harder instead */ - - post_code(0x42); - AGESAWRAPPER(amdinitenv); - - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - post_code(0x50); - copy_and_run(); - printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/lippert/frontrunner/Kconfig b/src/mainboard/lippert/frontrunner/Kconfig deleted file mode 100644 index 95dd96d..0000000 --- a/src/mainboard/lippert/frontrunner/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -if BOARD_LIPPERT_FRONTRUNNER - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX2 - select NORTHBRIDGE_AMD_GX2 - select SOUTHBRIDGE_AMD_CS5535 - select SUPERIO_WINBOND_W83627HF - select HAVE_DEBUG_SMBUS - select UDELAY_TSC - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_256 - select GX2_PROCESSOR_MHZ_366 - -config MAINBOARD_DIR - string - default lippert/frontrunner - -config MAINBOARD_PART_NUMBER - string - default "Cool Frontrunner" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_LIPPERT_FRONTRUNNER diff --git a/src/mainboard/lippert/frontrunner/board_info.txt b/src/mainboard/lippert/frontrunner/board_info.txt deleted file mode 100644 index a2b2d9f..0000000 --- a/src/mainboard/lippert/frontrunner/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: half -Board URL: http://www.lippertembedded.com/en/productoverview/products-in-detail/85-lipp... -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y diff --git a/src/mainboard/lippert/frontrunner/cmos.layout b/src/mainboard/lippert/frontrunner/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/lippert/frontrunner/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/lippert/frontrunner/devicetree.cb b/src/mainboard/lippert/frontrunner/devicetree.cb deleted file mode 100644 index 78d099a..0000000 --- a/src/mainboard/lippert/frontrunner/devicetree.cb +++ /dev/null @@ -1,21 +0,0 @@ -chip northbridge/amd/gx2 - device cpu_cluster 0 on - chip cpu/amd/geode_gx2 - device lapic 0 on end - end - end - - device domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5535 - register "setupflash" = "0" - device pci 12.0 on - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 off end # Audio - device pci 12.4 off end # VGA - end - end - end -end - diff --git a/src/mainboard/lippert/frontrunner/irq_tables.c b/src/mainboard/lippert/frontrunner/irq_tables.c deleted file mode 100644 index 5c045cc..0000000 --- a/src/mainboard/lippert/frontrunner/irq_tables.c +++ /dev/null @@ -1,49 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 5 -#define PIRQC 10 -#define PIRQD 10 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/frontrunner/romstage.c b/src/mainboard/lippert/frontrunner/romstage.c deleted file mode 100644 index 81642a1..0000000 --- a/src/mainboard/lippert/frontrunner/romstage.c +++ /dev/null @@ -1,130 +0,0 @@ -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/gx2def.h> -#include "southbridge/amd/cs5535/cs5535.h" -#include "southbridge/amd/cs5535/early_smbus.c" -#include "southbridge/amd/cs5535/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static const unsigned char spdbytes[] = { /* 4x Qimonda HYB25DC512160CF-6 */ - 0xFF, 0xFF, /* only values used by raminit.c are set */ - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, /* (Fundamental) memory type */ - [SPD_NUM_ROWS] = 0x0D, /* Number of row address bits [13] */ - [SPD_NUM_COLUMNS] = 0x0A, /* Number of column address bits [10] */ - [SPD_NUM_DIMM_BANKS] = 1, /* Number of module rows (banks) */ - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x60, /* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [6.0 ns in BCD] */ - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, /* Refresh rate/type [Self Refresh, 7.8 us] */ - [SPD_PRIMARY_SDRAM_WIDTH] = 64, /* SDRAM width (primary SDRAM) [64 bits] */ - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, /* SDRAM device attributes, number of banks on SDRAM device */ - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, /* SDRAM device attributes, CAS latency [3, 2.5, 2] */ - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, /* SDRAM module attributes [differential clk] */ - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, /* SDRAM device attributes, general [Concurrent AP] */ - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, /* SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] */ - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, /* SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] */ - 0xFF, - [SPD_tRP] = 72, /* Min. row precharge time [18 ns in units of 0.25 ns] */ - [SPD_tRRD] = 48, /* Min. row active to row active [12 ns in units of 0.25 ns] */ - [SPD_tRCD] = 72, /* Min. RAS to CAS delay [18 ns in units of 0.25 ns] */ - [SPD_tRAS] = 42, /* Min. RAS pulse width = active to precharge delay [42 ns] */ - [SPD_BANK_DENSITY] = 0x40, /* Density of each row on module [256 MB] */ - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 72 /* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [72 ns] */ -}; - -static inline int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if CONFIG_DEBUG_SMBUS - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { - print_err("ERROR: spd_read_byte(DIMM0, 0x"); - print_err_hex8(address); - print_err(") returns 0xff\n"); - } -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -#include "northbridge/amd/gx2/raminit.h" -#include "northbridge/amd/gx2/pll_reset.c" -#include "northbridge/amd/gx2/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_gx2/cpureginit.c" -#include "cpu/amd/geode_gx2/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl [] = { - {.channel0 = {DIMM0, DIMM1}} - }; - unsigned char temp; - - SystemPreInit(); - msr_init(); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - cs5535_early_setup(); - print_err("done cs5535 early\n"); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - print_err("done pll_reset\n"); - - cpuRegInit(); - print_err("done cpuRegInit\n"); - - sdram_initialize(1, memctrl); - - print_err("Done sdram_initialize\n"); - print_err("Disable watchdog\n"); - outb( 0x87, 0x4E); //enter SuperIO configuration mode - outb( 0x87, 0x4E); - - outb(0x20, 0x4e); - temp = inb(0x4f); - print_debug_hex8(temp); - if (temp != 0x52){ - print_err("CAN NOT READ SUPERIO VID\n"); - } - - outb(0x29, 0x4e); - outb(0x7c, 0x4f); - - outb( 0x07, 0x4E); //enable logical device 9 - outb( 0x09, 0x4F); - outb(0x30, 0x4e); - outb(1, 0x4f); - outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019 - outb( 0xC7, 0x4F); - outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables - temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! - print_debug_hex8(temp);print_debug(":"); - temp = temp & ~8; - outb( temp, 0x4F); - temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! - print_debug_hex8(temp);print_debug("\n"); -} diff --git a/src/mainboard/lippert/frontrunner_af/BiosCallOuts.c b/src/mainboard/lippert/frontrunner_af/BiosCallOuts.c new file mode 100644 index 0000000..9fc4f74 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/BiosCallOuts.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "SB800.h" +#include <southbridge/amd/cimx/sb800/gpio_oem.h> +#include "heapManager.h" +#include <stdlib.h> + +/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? + * + * Dedicated reset is not needed for the on-board Intel I210 GbE controller. + */ + +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit }, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + MEM_DATA_STRUCT *MemData = ConfigPtr; + + printk(BIOS_INFO, "Setting DDR3 voltage: "); + FCH_IOMUX(184) = 2; // GPIO184: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_25: // board is not able to provide this + MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry + printk(BIOS_INFO, "can't provide 1.25 V, using "); + // fall through + default: // AGESA.h says in mixed case 1.5V DIMMs get excluded + case VOLT1_35: + FCH_GPIO(184) = 0x08; // = output, disable PU, set to 0 + printk(BIOS_INFO, "1.35 V\n"); + break; + case VOLT1_5: + FCH_GPIO(184) = 0xC8; // = output, disable PU, set to 1 + printk(BIOS_INFO, "1.5 V\n"); + } + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/lippert/frontrunner_af/Kconfig b/src/mainboard/lippert/frontrunner_af/Kconfig new file mode 100644 index 0000000..6902ac0 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/Kconfig @@ -0,0 +1,99 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_LIPPERT_FRONTRUNNER_AF + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + # This erases 28 KB and writes 10 KB register dumps to SPI flash on every + # boot, wasting 3 s and causing wear! Therefore disable S3 for now. + #select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default lippert/frontrunner_af + +config MAINBOARD_PART_NUMBER + string + default "FrontRunner-AF" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 2 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n + +#config VGA_BIOS_FILE +# string "VGA BIOS path and filename" +# depends on VGA_BIOS +# default "rom/video/OntarioGenericVbios.bin" + +config VGA_BIOS_ID + string + default "1002,9802" + +config SB800_AHCI_ROM + bool + default n + +config DRIVERS_PS2_KEYBOARD + bool + default n + +endif # BOARD_LIPPERT_FRONTRUNNER_AF diff --git a/src/mainboard/lippert/frontrunner_af/Makefile.inc b/src/mainboard/lippert/frontrunner_af/Makefile.inc new file mode 100644 index 0000000..0630008 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/Makefile.inc @@ -0,0 +1,35 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ifeq ($(CONFIG_AHCI_BIOS),y) +stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) +cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom +pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) +pci$(stripped_ahcibios_id).rom-type := optionrom +endif + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/lippert/frontrunner_af/OptionsIds.h b/src/mainboard/lippert/frontrunner_af/OptionsIds.h new file mode 100644 index 0000000..cf0a4be --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/lippert/frontrunner_af/PlatformGnbPcie.c b/src/mainboard/lippert/frontrunner_af/PlatformGnbPcie.c new file mode 100644 index 0000000..c06296f --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/PlatformGnbPcie.c @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#include <string.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + VOID *BrazosPcieComplexListPtr; + VOID *BrazosPciePortPtr; + VOID *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +PCIe_PORT_DESCRIPTOR PortList [] = { + // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) + } +}; + +PCIe_DDI_DESCRIPTOR DdiList [] = { + // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) + { + 0, //Descriptor flags + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + {ConnectorTypeTravisDpToLvds, Aux1, Hdp1} + }, + // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + {ConnectorTypeDP, Aux2, Hdp2} + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + ASSERT(FALSE); + return; + } + + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; +} diff --git a/src/mainboard/lippert/frontrunner_af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/frontrunner_af/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..02c7f4e --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/PlatformGnbPcieComplex.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" +#include <cpu/amd/agesa/s3_resume.h> + +//GNB GPP Port4 +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port5 +#define GNB_GPP_PORT5_PORT_PRESENT 0 //0:Disable 1:Enable +#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port6 +#define GNB_GPP_PORT6_PORT_PRESENT 0 //0:Disable 1:Enable +#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port7 +#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable +#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port8 +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/lippert/frontrunner_af/acpi/routing.asl b/src/mainboard/lippert/frontrunner_af/acpi/routing.asl new file mode 100644 index 0000000..907b0e4 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/acpi/routing.asl @@ -0,0 +1,411 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + Package(){0x0009FFFF, 1, 0, 16 }, + Package(){0x0009FFFF, 2, 0, 17 }, + Package(){0x0009FFFF, 3, 0, 18 }, + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + Package(){0x000AFFFF, 1, 0, 16 }, + Package(){0x000AFFFF, 2, 0, 17 }, + Package(){0x000AFFFF, 3, 0, 18 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2, slot 3 behind Dev14, Fun4. */ + Package(){0x0004FFFF, 0, 0, 0x14 }, + Package(){0x0004FFFF, 1, 0, 0x15 }, + Package(){0x0004FFFF, 2, 0, 0x16 }, + Package(){0x0004FFFF, 3, 0, 0x17 }, + Package(){0x0005FFFF, 0, 0, 0x15 }, + Package(){0x0005FFFF, 1, 0, 0x16 }, + Package(){0x0005FFFF, 2, 0, 0x17 }, + Package(){0x0005FFFF, 3, 0, 0x14 }, + Package(){0x0006FFFF, 0, 0, 0x16 }, + Package(){0x0006FFFF, 1, 0, 0x17 }, + Package(){0x0006FFFF, 2, 0, 0x14 }, + Package(){0x0006FFFF, 3, 0, 0x15 }, + Package(){0x0007FFFF, 0, 0, 0x17 }, + Package(){0x0007FFFF, 1, 0, 0x14 }, + Package(){0x0007FFFF, 2, 0, 0x15 }, + Package(){0x0007FFFF, 3, 0, 0x16 }, + }) +} diff --git a/src/mainboard/lippert/frontrunner_af/acpi/sata.asl b/src/mainboard/lippert/frontrunner_af/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/lippert/frontrunner_af/acpi/superio.asl b/src/mainboard/lippert/frontrunner_af/acpi/superio.asl new file mode 100644 index 0000000..9be7492 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/acpi/superio.asl @@ -0,0 +1,39 @@ +/* + * SuperI/O devices + * + * This file is part of the coreboot project. + * + * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH + * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* PS/2 Keyboard */ +Device(KBC) { + Name(_HID, EISAID("PNP0303")) + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0060, 0x0060, 1, 1) + IO(Decode16, 0x0064, 0x0064, 1, 1) + IRQNoFlags(){1} + }) +} + +/* PS/2 Mouse */ +Device(PS2M) { + Name(_HID, EISAID("PNP0F13")) + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){12} + }) +} diff --git a/src/mainboard/lippert/frontrunner_af/acpi/usb.asl b/src/mainboard/lippert/frontrunner_af/acpi/usb.asl new file mode 100644 index 0000000..2822ffd --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/lippert/frontrunner_af/acpi_tables.c b/src/mainboard/lippert/frontrunner_af/acpi_tables.c new file mode 100644 index 0000000..588345e --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam14.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* The DSDT needs additional work for the AGESA SSDT Pstate table */ + /* Keep the comment for a while. */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + } else { + printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); + } + + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/lippert/frontrunner_af/agesawrapper.c b/src/mainboard/lippert/frontrunner_af/agesawrapper.c new file mode 100644 index 0000000..fc0bee2 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/agesawrapper.c @@ -0,0 +1,625 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "PlatformGnbPcieComplex.h" + +#define __SIMPLE_DEVICE__ + +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <stdint.h> +#include <string.h> + +#include <cpu/amd/agesa/s3_resume.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#define MMCONF_ENABLE 1 + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; + +/*------------------------------------------------------------------------------ + * T Y P E D E F S A N D S T R U C T U R E S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * E X P O R T E D F U N C T I O N S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * L O C A L F U N C T I O N S + *------------------------------------------------------------------------------ + */ +AGESA_STATUS agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 + PciData |= 1 << 7; // set NP (non-posted) bit + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; // last address before non-posted range + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + UINT8 BusRangeVal = 0; + UINT8 BusNum; + UINT8 Index; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + + for (Index = 0; Index < 8; Index++) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1) { + BusRangeVal = Index; + break; + } + } + + MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000ull; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set Ontario Link Data */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); + PciData = 0x01308002; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); + PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + UINT32 PciValue; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + /* Write to D1F0x18 */ + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x00010100; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Legacy Bridge Mode + * Modify B1D5F0x18 + */ + PciAddress.Address.Bus = 1; + PciAddress.Address.Device = 5; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Legacy Bridge Mode + * Modify B1D5F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Pcie Mode + * Modify B0D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Pcie Mode + * Modify B0D1F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Base and Limit Address + * Modify B0D1F0x20 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x20; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96009600; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Prefetchable Memory Limit and Base + * Modify B0D1F0x24 + */ + PciAddress.Address.Register = 0x24; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x8FF18001; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS * AmdLateParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + Status = AmdInitLate (AmdLateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" + " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" + " Mce:%p\n Cmc:%p\n Alib:%p\n", + __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, + AcpiWheaMce, AcpiWheaCmc, AcpiAlib); + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return Status; +} + +AGESA_STATUS agesawrapper_amdinitresume ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amds3laterestore ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_amdS3Save ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + AmdCreateStruct(&AmdInterfaceParams); + + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save (AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage + ); + } + + OemAgesaSaveMtrr(); + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +AGESA_STATUS agesawrapper_amdreadeventlog ( + VOID + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/lippert/frontrunner_af/agesawrapper.h b/src/mainboard/lippert/frontrunner_af/agesawrapper.h new file mode 100644 index 0000000..a74a800 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/agesawrapper.h @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); + +AGESA_STATUS agesawrapper_amdreadeventlog(void); + +AGESA_STATUS agesawrapper_amdinitcpuio(void); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +void *agesawrapper_getlateinitptr (int pick); + +#endif diff --git a/src/mainboard/lippert/frontrunner_af/board_info.txt b/src/mainboard/lippert/frontrunner_af/board_info.txt new file mode 100644 index 0000000..9246cdb --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1277 +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/lippert/frontrunner_af/buildOpts.c b/src/mainboard/lippert/frontrunner_af/buildOpts.c new file mode 100644 index 0000000..a6e4472 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/buildOpts.c @@ -0,0 +1,459 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> + +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT FALSE +#define BLDOPT_REMOVE_SLIT FALSE +#define BLDOPT_REMOVE_WHEA FALSE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * Agesa entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE TRUE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO FALSE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/* + * Agesa configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ +#include "AGESA.h" +#include "CommonReturns.h" + +/* The fixed MTRR values to be set after memory initialization. */ +CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/* Include the files that instantiate the configuration definitions. */ + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ +// This is the delivery package title, "BrazosPI" +// This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + +// This is the release version number of the AGESA component +// This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +// Instantiate all solution relevant data. +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//DA Customer table +CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/lippert/frontrunner_af/cmos.layout b/src/mainboard/lippert/frontrunner_af/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/lippert/frontrunner_af/devicetree.cb b/src/mainboard/lippert/frontrunner_af/devicetree.cb new file mode 100644 index 0000000..f77c973 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/devicetree.cb @@ -0,0 +1,110 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 off end # PCIE P2P bridge + device pci 6.0 off end # PCIE P2P bridge + device pci 7.0 off end # PCIE P2P bridge + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 off end + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/smsc/smscsuperio + device pnp 4e.0 off end # Floppy + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.A on # Runtime Regs + io 0x60 = 0x0E00 + drq 0xF0 = 0x0B # no 32kHz + end + end # smscsuperio + end #LPC + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 off end # OHCI FS/LS USB + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 off end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/frontrunner_af/dsdt.asl b/src/mainboard/lippert/frontrunner_af/dsdt.asl new file mode 100644 index 0000000..bbd3e4f --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/dsdt.asl @@ -0,0 +1,1835 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + C000, /* name space name, align with BLDCFG_PROCESSOR_SCOPE_NAME[01] */ + 0, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + + Processor( + C001, /* name space name */ + 1, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + Processor( + C002, /* name space name */ + 2, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + Processor( + C003, /* name space name */ + 3, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PIRA) + Store(0, PIRB) + Store(0, PIRC) + Store(0, PIRD) + Store(0, PIRE) + Store(0, PIRF) + Store(0, PIRG) + Store(0, PIRH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PIRA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PIRB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PIRC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIRD) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PIRE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PIRF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PIRG) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PIRH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ + Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + + /* Operating System Capabilities Method */ + Method(_OSC,4) + { /* Check for proper PCI/PCIe UUID */ + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } + } + + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + #include "acpi/superio.asl" + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device + * The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x00FF, /* range maximum */ + 0x0000, /* translation */ + 0x0100, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + + IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ + IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */ + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ +#if 0 + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ +#if 0 + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +#endif +} +/* End of ASL file */ diff --git a/src/mainboard/lippert/frontrunner_af/irq_tables.c b/src/mainboard/lippert/frontrunner_af/irq_tables.c new file mode 100644 index 0000000..12a64a8 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/irq_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam14.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/lippert/frontrunner_af/mainboard.c b/src/mainboard/lippert/frontrunner_af/mainboard.c new file mode 100644 index 0000000..ee538c3 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/mainboard.c @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb800/sb800.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/amd/mtrr.h> +#include "SBPLATFORM.h" +#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ +#include <southbridge/amd/cimx/sb800/gpio_oem.h> + +/* Init SIO GPIOs. */ +#define SIO_RUNTIME_BASE 0x0E00 +static const u16 sio_init_table[] = { // hi=offset, lo=value + 0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200 + 0x2300, // GP10: COM1 termination = push/pull output + 0x2400, // GP11: COM2 termination = push/pull output + 0x2500, // GP12: COM1 RS485 mode = push/pull output + 0x2600, // GP13: COM2 RS485 mode = push/pull output + 0x2700, // GP14: COM1 speed A = push/pull output + 0x2900, // GP15: COM1 speed B = push/pull output + 0x2A00, // GP16: COM2 speed A = push/pull output + 0x2B00, // GP17: COM2 speed B = push/pull output + + 0x3904, // GP36 = KBDRST# function + + 0x4E74, // GP4x: Ethernet enable = on + 0x6E84, // GP44: Ethernet enable = open drain output + + // GP5x = COM2 function instead of GPIO + 0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604, + + 0x470C, // GP60 = WDT function + 0x5E00, // LED2: Live LED = off + 0x4884, // GP61: Live LED = LED2 function + + 0x5038, // GP6x: USB power = 3x on + 0x5580, // GP63: USB power 0/1 = open drain output + 0x5680, // GP64: USB power 2/3 = open drain output + 0x5780, // GP65: USB power 4/5 = open drain output +}; + +/* Write data block to slave on SMBUS0. */ +#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) +#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) +#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) +#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) +#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) +#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) +static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) +{ + __outbyte(SMB0_STATUS, 0x1E); // clear error status + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out + __outbyte(SMB0_HOSTCMD, command); // or destination offset + __outbyte(SMB0_DATA0, length); // sent before data + __inbyte(SMB0_CONTROL); // reset block data array + while (length--) + __outbyte(SMB0_BLOCKDATA, *(data++)); + __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ + + while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors + return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors +} + +static void init(struct device *dev) +{ + volatile u8 *spi_base; // base addr of Hudson's SPI host controller + int i; + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); + + /* Init Hudson GPIOs. */ + printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); + FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices + FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed + FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU) + FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0 + FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups + FCH_IOMUX( 57) = 1; + FCH_GPIO ( 57) = 0x28; + FCH_IOMUX( 58) = 1; + FCH_GPIO ( 58) = 0x28; + FCH_IOMUX( 96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU) + FCH_IOMUX( 52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector + FCH_IOMUX( 61) = 2; // default to inputs with int. PU + FCH_IOMUX( 62) = 2; + FCH_IOMUX(187) = 2; + FCH_IOMUX(188) = 2; + FCH_IOMUX(189) = 1; + FCH_IOMUX(190) = 1; + FCH_IOMUX(191) = 1; + FCH_IOMUX(192) = 1; + if (!fch_gpio_state(197)) // just in case anyone cares + printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); + printk(BIOS_INFO, "Board revision ID: %u\n", + fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); + + /* Init SIO GPIOs. */ + printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE); + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 val = sio_init_table[i]; + outb((u8)val, SIO_RUNTIME_BASE + (val >> 8)); + } + + /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ + spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + + /* Notify the SMC we're alive and kicking, or after a while it will + * effect a power cycle and switch to the alternate BIOS chip. + * Should be done as late as possible. */ + printk(BIOS_INFO, "Sending BIOS alive message\n"); + const u8 i_am_alive[] = { 0x03 }; + if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) + printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); + + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); +} + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + dev->ops->init = init; + + /* enable GPP CLK0 */ + /* disable GPP CLK1 thru SLT_GFX_CLK */ + u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); + *(misc_mem_clk_cntrl + 0) = 0x0F; + *(misc_mem_clk_cntrl + 1) = 0x00; + *(misc_mem_clk_cntrl + 2) = 0x00; + *(misc_mem_clk_cntrl + 3) = 0x00; + *(misc_mem_clk_cntrl + 4) = 0x00; + + /* + * Initialize ASF registers to an arbitrary address because someone + * long ago set things up this way inside the SPD read code. The + * SPD read code has been made generic and moved out of the board + * directory, so the ASF init is being done here. + */ + pm_iowrite(0x29, 0x80); + pm_iowrite(0x28, 0x61); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/frontrunner_af/mptable.c b/src/mainboard/lippert/frontrunner_af/mptable.c new file mode 100644 index 0000000..078601e --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/mptable.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam14.h> +#include <SBPLATFORM.h> + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + u8 byte; + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device*/ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + /* Southbridge HD Audio: */ + PCI_INT(0x0, 0x14, 0x2, 0x12); + + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lippert/frontrunner_af/platform_cfg.h b/src/mainboard/lippert/frontrunner_af/platform_cfg.h new file mode 100644 index 0000000..03146d0 --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/platform_cfg.h @@ -0,0 +1,259 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x3F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1F + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +#define AZALIA_SDIN_PIN 0x02 + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_DISABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 1 + +static const CODECENTRY frontrunneraf_codec_alc886[] = /* Realtek ALC886/8 */ +{ + /* NID, PinConfig (Verbs 71F..C) */ + {0x11, 0x411111F0}, /* NPC */ + {0x12, 0x411111F0}, /* DMIC */ + {0x14, 0x01214110}, /* FRONT (Port-D) */ + {0x15, 0x01011112}, /* SURR (Port-A) */ + {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ + {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ + {0x18, 0x01A19930}, /* MIC1 (Port-B) */ + {0x19, 0x411111F0}, /* MIC2 (Port-F) */ + {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ + {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ + {0x1C, 0x411111F0}, /* CD-IN */ + {0x1D, 0x40132601}, /* BEEP-IN */ + {0x1E, 0x01441120}, /* S/PDIF-OUT */ + {0x1F, 0x01C46140}, /* S/PDIF-IN */ + {0xff, 0xffffffff} /* end of table */ +}; + +static const CODECTBLLIST codec_tablelist[] = +{ + {0x10ec0888, (CODECENTRY*)&frontrunneraf_codec_alc886[0]}, + {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} +}; + +/** + * @def AZALIA_OEM_VERB_TABLE + * Mainboard specific codec verb table list + */ +#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) + +/* set up an ACPI preferred power management profile */ +/* from acpi.h + * PM_UNSPECIFIED = 0, + * PM_DESKTOP = 1, + * PM_MOBILE = 2, + * PM_WORKSTATION = 3, + * PM_ENTERPRISE_SERVER = 4, + * PM_SOHO_SERVER = 5, + * PM_APPLIANCE_PC = 6, + * PM_PERFORMANCE_SERVER = 7, + * PM_TABLET = 8 + */ +#define FADT_PM_PROFILE 1 + +#endif diff --git a/src/mainboard/lippert/frontrunner_af/romstage.c b/src/mainboard/lippert/frontrunner_af/romstage.c new file mode 100644 index 0000000..61fd6bd --- /dev/null +++ b/src/mainboard/lippert/frontrunner_af/romstage.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include <superio/smsc/smscsuperio/smscsuperio.h> +#include "cpu/x86/lapic.h" +#include <cpu/x86/cache.h> +#include <sb_cimx.h> +#include "SBPLATFORM.h" +#include "cbmem.h" +#include "cpu/amd/mtrr.h" +#include "cpu/amd/agesa/s3_resume.h" + + +#define SERIAL_DEV PNP_DEV(0x4e, SMSCSUPERIO_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ + __writemsr (0xc0010062, 0); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x35); + AGESAWRAPPER(amdinitmmio); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + /* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all + * hang, looks like DRAM re-init goes wrong, don't know why. */ + val = AGESAWRAPPER(amdinitpost); + if (val == 7) /* fatal, amdinitenv below is going to hang */ + outb(0x06, 0x0cf9); /* reset system harder instead */ + + post_code(0x42); + AGESAWRAPPER(amdinitenv); + + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig deleted file mode 100644 index 04c2220..0000000 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -if BOARD_LIPPERT_HURRICANE_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - select POWER_BUTTON_FORCE_ENABLE if !BOARD_OLD_REVISION - -config MAINBOARD_DIR - string - default lippert/hurricane-lx - -config MAINBOARD_PART_NUMBER - string - default "Hurricane-LX" - -config IRQ_SLOT_COUNT - int - default 8 - -config BOARD_OLD_REVISION - bool "Board is old pre-3.0 revision" - default n - select POWER_BUTTON_DEFAULT_DISABLE - help - Look on the bottom side for a number like 406-0001-30. The last 2 - digits state the PCB revision (3.0 in this example). For 2.0 or older - boards choose Y, for 3.0 and newer say N. - - Old revision boards need a jumper shorting the power button to - power on automatically. You may enable the button only after this - jumper has been removed. New revision boards are not restricted - in this way, and always have the power button enabled. - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_HURRICANE_LX diff --git a/src/mainboard/lippert/hurricane-lx/board_info.txt b/src/mainboard/lippert/hurricane-lx/board_info.txt deleted file mode 100644 index b464c85..0000000 --- a/src/mainboard/lippert/hurricane-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1154 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/hurricane-lx/devicetree.cb b/src/mainboard/lippert/hurricane-lx/devicetree.cb deleted file mode 100644 index 7f751eb..0000000 --- a/src/mainboard/lippert/hurricane-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/hurricane-lx/irq_tables.c b/src/mainboard/lippert/hurricane-lx/irq_tables.c deleted file mode 100644 index 10fefcb..0000000 --- a/src/mainboard/lippert/hurricane-lx/irq_tables.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x36, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x5, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c deleted file mode 100644 index 56f6a0a..0000000 --- a/src/mainboard/lippert/hurricane-lx/mainboard.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if CONFIG_ONBOARD_UARTS_RS485 - #define SIO_GP1X_CONFIG 0x06 -#else - #define SIO_GP1X_CONFIG 0x00 -#endif - -static const u16 ec_init_table[] = { /* hi=data, lo=index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default) - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# -#if !CONFIG_BOARD_OLD_REVISION - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz -#endif - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old) - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c deleted file mode 100644 index d8e9cd9..0000000 --- a/src/mainboard/lippert/hurricane-lx/romstage.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include <spd.h> -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum. */ -#define SMC_CONFIG 0x01 - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#if !CONFIG_BOARD_OLD_REVISION -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} -#endif - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi=data, lo=index - 0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2D29, // (GP36=FAN_CTL3 (PWM), GP23,22,16,15=SPI, GP13=PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE - 0x06C8, // config GP12,11 as output, GP10 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 -#if CONFIG_BOARD_OLD_REVISION - 0x1F2A, 0xC072, // switch GP13 to GPIO, WDT output from PWROK to KRST -#endif -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - -#if !CONFIG_BOARD_OLD_REVISION - int err; - /* bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - print_err("ERROR "); - print_err_char('0'+err); - print_err(" sending config data to SMC\n"); - } -#endif - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/hurricane_lx/Kconfig b/src/mainboard/lippert/hurricane_lx/Kconfig new file mode 100644 index 0000000..696e01f --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/Kconfig @@ -0,0 +1,56 @@ +if BOARD_LIPPERT_HURRICANE_LX + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_ITE_IT8712F + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + # Board is equipped with a 1 MB SPI flash, however, due to limitations + # of the IT8712F Super I/O, only the top 512 KB are directly mapped. + select BOARD_ROMSIZE_KB_512 + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_333 + select POWER_BUTTON_FORCE_ENABLE if !BOARD_OLD_REVISION + +config MAINBOARD_DIR + string + default lippert/hurricane_lx + +config MAINBOARD_PART_NUMBER + string + default "Hurricane-LX" + +config IRQ_SLOT_COUNT + int + default 8 + +config BOARD_OLD_REVISION + bool "Board is old pre-3.0 revision" + default n + select POWER_BUTTON_DEFAULT_DISABLE + help + Look on the bottom side for a number like 406-0001-30. The last 2 + digits state the PCB revision (3.0 in this example). For 2.0 or older + boards choose Y, for 3.0 and newer say N. + + Old revision boards need a jumper shorting the power button to + power on automatically. You may enable the button only after this + jumper has been removed. New revision boards are not restricted + in this way, and always have the power button enabled. + +config ONBOARD_UARTS_RS485 + bool "Switch on-board serial ports to RS485" + default n + help + If selected, both on-board serial ports will operate in RS485 mode + instead of RS232. + +config PLLMSRlo + hex + default 0x00de6001 + +endif # BOARD_LIPPERT_HURRICANE_LX diff --git a/src/mainboard/lippert/hurricane_lx/board_info.txt b/src/mainboard/lippert/hurricane_lx/board_info.txt new file mode 100644 index 0000000..b464c85 --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1154 +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/lippert/hurricane_lx/devicetree.cb b/src/mainboard/lippert/hurricane_lx/devicetree.cb new file mode 100644 index 0000000..7f751eb --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/devicetree.cb @@ -0,0 +1,90 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end # Northbridge + device pci 1.1 on end # Graphics + device pci 1.2 on end # AES + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, + # UARTs, etc IRQs. OK + register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 + register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above + register "lpc_serirq_mode" = "1" + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" # 0:host, 1:device + register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3E8" + register "com1_irq" = "6" + register "com2_enable" = "0" + register "com2_address" = "0x2E8" + register "com2_irq" = "6" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci 8.0 on end # Slot4 + device pci 9.0 on end # Slot3 + device pci a.0 on end # Slot2 + device pci b.0 on end # Slot1 + device pci c.0 on end # IT8888 + device pci d.0 on end # Mini-PCI + device pci e.0 on end # Ethernet + device pci f.0 on # ISA Bridge + chip superio/ite/it8712f + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # EC + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME + irq 0x70 = 9 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # PS/2 mouse + irq 0x70 = 12 + end + device pnp 2e.7 on # GPIO + io 0x62 = 0x1220 # Simple I/O + io 0x64 = 0x1228 # SPI + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end + end + device pci f.2 on end # IDE + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end +end diff --git a/src/mainboard/lippert/hurricane_lx/irq_tables.c b/src/mainboard/lippert/hurricane_lx/irq_tables.c new file mode 100644 index 0000000..10fefcb --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/irq_tables.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 5 +#define PIRQD 15 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x36, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ + {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ + {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x5, 0x0}, /* Mini-PCI */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/lippert/hurricane_lx/mainboard.c b/src/mainboard/lippert/hurricane_lx/mainboard.c new file mode 100644 index 0000000..56f6a0a --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/mainboard.c @@ -0,0 +1,87 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +/* Bit1 switches Com1 to RS485, bit2 same for Com2. */ +#if CONFIG_ONBOARD_UARTS_RS485 + #define SIO_GP1X_CONFIG 0x06 +#else + #define SIO_GP1X_CONFIG 0x00 +#endif + +static const u16 ec_init_table[] = { /* hi=data, lo=index */ + 0x1900, /* Enable monitoring */ + 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ + 0x805C, /* Unlock zero adjust */ + 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ + 0x005C, /* Lock zero adjust */ + 0xD014 /* Also set FAN_CTL polarity to Active High */ +}; + +static void init(struct device *dev) +{ + unsigned int gpio_base, i; + printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__); + + /* Init CS5536 GPIOs */ + gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; + + outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# + outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default) + outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# + outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# + outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# +#if !CONFIG_BOARD_OLD_REVISION + outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz + outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz +#endif + outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old) + + /* Init Environment Controller. */ + for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { + u16 val = ec_init_table[i]; + outb((u8)val, 0x0295); + outb(val >> 8, 0x0296); + } + + /* bit2 = RS485_EN2, bit1 = RS485_EN1 */ + outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ + + printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/hurricane_lx/romstage.c b/src/mainboard/lippert/hurricane_lx/romstage.c new file mode 100644 index 0000000..d8e9cd9 --- /dev/null +++ b/src/mainboard/lippert/hurricane_lx/romstage.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2010 LiPPERT Embedded Computers GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from the SpaceRunner-LX mainboard. */ + +#include <stdlib.h> +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include <spd.h> +#include "southbridge/amd/cs5536/early_smbus.c" +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +/* Bit0 enables Spread Spectrum. */ +#define SMC_CONFIG 0x01 + +int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + + return smbus_read_byte(device, address); +} + +#if !CONFIG_BOARD_OLD_REVISION +/* Send config data to System Management Controller via SMB. */ +static int smc_send_config(unsigned char config_data) +{ + if (smbus_check_stop_condition(SMBUS_IO_BASE)) + return 1; + if (smbus_start_condition(SMBUS_IO_BASE)) + return 2; + if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address + return 3; + if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data + return 4; + if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length + return 5; + if (smbus_send_command(SMBUS_IO_BASE, config_data)) + return 6; + smbus_stop_condition(SMBUS_IO_BASE); + return 0; +} +#endif + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +static const u16 sio_init_table[] = { // hi=data, lo=index + 0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled + 0x1423, // don't delay PoWeROK1/2 + 0x9072, // watchdog triggers PWROK, counts seconds +#if !CONFIG_USE_WATCHDOG_ON_BOOT + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 +#endif + 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins + 0xBF27, 0xFF28, 0x2D29, // (GP36=FAN_CTL3 (PWM), GP23,22,16,15=SPI, GP13=PWROK1) + 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN + 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE + 0x06C8, // config GP12,11 as output, GP10 as input + 0x2DF5, // map Hw Monitor Thermal Output to GP55 +#if CONFIG_BOARD_OLD_REVISION + 0x1F2A, 0xC072, // switch GP13 to GPIO, WDT output from PWROK to KRST +#endif +}; + +/* Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + int i; + + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 reg = sio_init_table[i]; + ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); + } +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0, DIMM1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* + * Note: Must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + mb_gpio_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + +#if !CONFIG_BOARD_OLD_REVISION + int err; + /* bit0 = Spread Spectrum */ + if ((err = smc_send_config(SMC_CONFIG))) { + print_err("ERROR "); + print_err_char('0'+err); + print_err(" sending config data to SMC\n"); + } +#endif + + sdram_initialize(1, memctrl); + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ +} diff --git a/src/mainboard/lippert/literunner-lx/Kconfig b/src/mainboard/lippert/literunner-lx/Kconfig deleted file mode 100644 index c3aab0e..0000000 --- a/src/mainboard/lippert/literunner-lx/Kconfig +++ /dev/null @@ -1,50 +0,0 @@ -if BOARD_LIPPERT_LITERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/literunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool LiteRunner-LX" - -config IRQ_SLOT_COUNT - int - default 5 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports 1 & 2 to RS485" - default n - help - If selected, the first two on-board serial ports will operate in RS485 - mode instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board CF socket act as Slave" - default n - help - If selected, the on-board Compact Flash card socket will act as IDE - Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_LITERUNNER_LX diff --git a/src/mainboard/lippert/literunner-lx/board_info.txt b/src/mainboard/lippert/literunner-lx/board_info.txt deleted file mode 100644 index 47b90b5..0000000 --- a/src/mainboard/lippert/literunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1128 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/literunner-lx/devicetree.cb b/src/mainboard/lippert/literunner-lx/devicetree.cb deleted file mode 100644 index 834f109..0000000 --- a/src/mainboard/lippert/literunner-lx/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x0000129A" # 00010010 10011010 - register "lpc_serirq_polarity" = "0x0000ED65" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Ethernet 2 - device pci c.0 on end # IT8888 - device pci d.0 on end # Mini-PCI - device pci e.0 on end # Ethernet 1 - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/literunner-lx/irq_tables.c b/src/mainboard/lippert/literunner-lx/irq_tables.c deleted file mode 100644 index 0de7919..0000000 --- a/src/mainboard/lippert/literunner-lx/irq_tables.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xB8, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 1 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet 2 */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}}, 0x1, 0x0}, /* Mini-PCI */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c deleted file mode 100644 index 368665e..0000000 --- a/src/mainboard/lippert/literunner-lx/mainboard.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if CONFIG_ONBOARD_UARTS_RS485 - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -/* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ -#define SIO_GP2X_CONFIG 0x00 - -static const u16 ec_init_table[] = { /* hi=data, lo=index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - /* bit1 = COM3_RX_EN, bit0 = COM3_TX_EN */ - outb(SIO_GP2X_CONFIG, 0x1221); /* Simple-I/O GP27-20 */ - - printk(BIOS_DEBUG, "LiPPERT LiteRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c deleted file mode 100644 index 6839332..0000000 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on romstage.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board CF slot act as IDE slave. */ -#if CONFIG_ONBOARD_IDE_SLAVE - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if CONFIG_DEBUG_SMBUS - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { - print_err("ERROR: spd_read_byte(DIMM0, 0x"); - print_err_hex8(address); - print_err(") returns 0xff\n"); - } -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi=data, lo=index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) - 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN - 0xFFC2, // enable Simple-I/O for GP37-30 - 0x07C8, // config GP12-10 as output - 0x03C9, // config GP21-20 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - print_err("ERROR "); - print_err_char('0'+err); - print_err(" sending config data to SMC\n"); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig deleted file mode 100644 index 051713a..0000000 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig +++ /dev/null @@ -1,42 +0,0 @@ -if BOARD_LIPPERT_ROADRUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Standard chip is a 512 KB FWH. Replacing it with a 1 MB - # SST 49LF008A is possible. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_333 - -config MAINBOARD_DIR - string - default lippert/roadrunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool RoadRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_ROADRUNNER_LX diff --git a/src/mainboard/lippert/roadrunner-lx/board_info.txt b/src/mainboard/lippert/roadrunner-lx/board_info.txt deleted file mode 100644 index fc48fcd..0000000 --- a/src/mainboard/lippert/roadrunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1147 -ROM package: PLCC -ROM protocol: FWH -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb deleted file mode 100644 index f823681..0000000 --- a/src/mainboard/lippert/roadrunner-lx/devicetree.cb +++ /dev/null @@ -1,89 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 # Southbridge - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - # io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/roadrunner-lx/irq_tables.c b/src/mainboard/lippert/roadrunner-lx/irq_tables.c deleted file mode 100644 index 77fc58a..0000000 --- a/src/mainboard/lippert/roadrunner-lx/irq_tables.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c deleted file mode 100644 index b8c7e4a..0000000 --- a/src/mainboard/lippert/roadrunner-lx/mainboard.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */ -#if CONFIG_ONBOARD_UARTS_RS485 - #define SIO_GP1X_CONFIG 0x26 -#else - #define SIO_GP1X_CONFIG 0x20 -#endif - -static const u16 ec_init_table[] = { /* hi=data, lo=index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs. */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - PM-LED - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c deleted file mode 100644 index ef3f7d2..0000000 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include <stdlib.h> -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include <spd.h> -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi=data, lo=index - 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal - 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset - 0x9072, // watchdog triggers PWROK, counts seconds -#if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) - 0x46B8, 0x0CB9, // enable pullups on RS485_EN - 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 - 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) - 0x26C8, // config GP15,12,11 as output; GP14 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ -} diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig deleted file mode 100644 index 65645fd..0000000 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig +++ /dev/null @@ -1,49 +0,0 @@ -if BOARD_LIPPERT_SPACERUNNER_LX - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_ITE_IT8712F - select HAVE_DEBUG_SMBUS - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - # Board is equipped with a 1 MB SPI flash, however, due to limitations - # of the IT8712F Super I/O, only the top 512 KB are directly mapped. - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_ENABLE - select PLL_MANUAL_CONFIG - select CORE_GLIU_500_400 - -config MAINBOARD_DIR - string - default lippert/spacerunner-lx - -config MAINBOARD_PART_NUMBER - string - default "Cool SpaceRunner-LX" - -config IRQ_SLOT_COUNT - int - default 7 - -config ONBOARD_UARTS_RS485 - bool "Switch on-board serial ports to RS485" - default n - help - If selected, both on-board serial ports will operate in RS485 mode - instead of RS232. - -config ONBOARD_IDE_SLAVE - bool "Make on-board SSD act as Slave" - default n - help - If selected, the on-board SSD will act as IDE Slave instead of Master. - -config PLLMSRlo - hex - default 0x00de6001 - -endif # BOARD_LIPPERT_SPACERUNNER_LX diff --git a/src/mainboard/lippert/spacerunner-lx/board_info.txt b/src/mainboard/lippert/spacerunner-lx/board_info.txt deleted file mode 100644 index 76be510..0000000 --- a/src/mainboard/lippert/spacerunner-lx/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1148 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb deleted file mode 100644 index 8619e84..0000000 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ /dev/null @@ -1,90 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0:host, 1:device - register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 - register "unwanted_vpci[1]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA Bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 # EC - io 0x62 = 0x298 # PME - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 # Simple I/O - io 0x64 = 0x1228 # SPI - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE - device pci f.3 off end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end diff --git a/src/mainboard/lippert/spacerunner-lx/irq_tables.c b/src/mainboard/lippert/spacerunner-lx/irq_tables.c deleted file mode 100644 index af7df0a..0000000 --- a/src/mainboard/lippert/spacerunner-lx/irq_tables.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on irq_tables.c from AMD's DB800 mainboard. */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/pirq_routing.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xE0, /* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */ - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* CPU */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* slot1 */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0}, /* slot2 */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0}, /* slot3 */ - {0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0}, /* slot4 */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c deleted file mode 100644 index a1be78f..0000000 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on mainboard.c from AMD's DB800 mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if CONFIG_ONBOARD_UARTS_RS485 - #define SIO_GP1X_CONFIG 0x07 -#else - #define SIO_GP1X_CONFIG 0x01 -#endif - -static const u16 ec_init_table[] = { /* hi=data, lo=index */ - 0x1900, /* Enable monitoring */ - 0x3050, /* VIN4,5 enabled */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x04000000, gpio_base + 0x18); // GPIO10 pull up 0 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c deleted file mode 100644 index f397e37..0000000 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ - -#include <stdlib.h> -#include <stdint.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include "southbridge/amd/cs5536/early_smbus.c" -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */ -#if CONFIG_ONBOARD_IDE_SLAVE - #define SMC_CONFIG 0x03 -#else - #define SMC_CONFIG 0x01 -#endif - -static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I - 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set - [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type - [SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13] - [SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10] - [SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks) - 0xFF, 0xFF, 0xFF, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD] - 0xFF, 0xFF, - [SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us] - [SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits] - 0xFF, 0xFF, 0xFF, - [SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2] - 0xFF, 0xFF, - [SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk] - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP] - [SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD] - 0xFF, - [SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD] - 0xFF, - [SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns] - [SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns] - [SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns] - [SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns] - [SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB] - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - [SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns] -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - -#if CONFIG_DEBUG_SMBUS - if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) { - print_err("ERROR: spd_read_byte(DIMM0, 0x"); - print_err_hex8(address); - print_err(") returns 0xff\n"); - } -#endif - - /* Fake SPD ROM value */ - return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF; -} - -/* Send config data to System Management Controller via SMB. */ -static int smc_send_config(unsigned char config_data) -{ - if (smbus_check_stop_condition(SMBUS_IO_BASE)) - return 1; - if (smbus_start_condition(SMBUS_IO_BASE)) - return 2; - if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address - return 3; - if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data - return 4; - if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length - return 5; - if (smbus_send_command(SMBUS_IO_BASE, config_data)) - return 6; - smbus_stop_condition(SMBUS_IO_BASE); - return 0; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -static const u16 sio_init_table[] = { // hi=data, lo=index - 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal - 0x1423, // don't delay PoWeROK1/2 - 0x9072, // watchdog triggers PWROK, counts seconds -#if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 -#endif - 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) - 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN - 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED - 0x07C8, // config GP12-10 as output - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 reg = sio_init_table[i]; - ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8)); - } -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - int err; - - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0, DIMM1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: Must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - /* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */ - if ((err = smc_send_config(SMC_CONFIG))) { - print_err("ERROR "); - print_err_char('0'+err); - print_err(" sending config data to SMC\n"); - } - - sdram_initialize(1, memctrl); - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/lippert/toucan-af/BiosCallOuts.c b/src/mainboard/lippert/toucan-af/BiosCallOuts.c deleted file mode 100644 index 4b30c39..0000000 --- a/src/mainboard/lippert/toucan-af/BiosCallOuts.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "SB800.h" -#include <southbridge/amd/cimx/sb800/gpio_oem.h> -#include "heapManager.h" -#include <stdlib.h> - -/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? - * - * COM Express doesn't provide dedicated resets for individual lanes - * and it's not needed for the on-board Intel I210 GbE controller. - */ - -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, - {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, - {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, agesa_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, - {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit}, - {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -/* Call the host environment interface to provide a user hook opportunity. */ -static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) -{ - MEM_DATA_STRUCT *MemData = ConfigPtr; - - printk(BIOS_INFO, "Setting DDR3 voltage: "); - FCH_IOMUX(65) = 1; // GPIO65: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V - switch (MemData->ParameterListPtr->DDR3Voltage) { - case VOLT1_25: // board is not able to provide this - MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry - printk(BIOS_INFO, "can't provide 1.25 V, using "); - // fall through - default: // AGESA.h says in mixed case 1.5V DIMMs get excluded - case VOLT1_35: - FCH_GPIO(65) = 0x08; // = output, disable PU, set to 0 - printk(BIOS_INFO, "1.35 V\n"); - break; - case VOLT1_5: - FCH_GPIO(65) = 0xC8; // = output, disable PU, set to 1 - printk(BIOS_INFO, "1.5 V\n"); - } - - return AGESA_SUCCESS; -} diff --git a/src/mainboard/lippert/toucan-af/Kconfig b/src/mainboard/lippert/toucan-af/Kconfig deleted file mode 100644 index 32ea029..0000000 --- a/src/mainboard/lippert/toucan-af/Kconfig +++ /dev/null @@ -1,101 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -if BOARD_LIPPERT_TOUCAN_AF - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_AGESA_FAMILY14 - select NORTHBRIDGE_AMD_AGESA_FAMILY14 - select SOUTHBRIDGE_AMD_CIMX_SB800 - # The Toucan-AF is meant to work on any COM Express Type 6 baseboard. - # The ADLINK ExpressBase-6 baseboard happens to use this SIO: - select SUPERIO_WINBOND_W83627DHG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - # This erases 28 KB and writes 10 KB register dumps to SPI flash on every - # boot, wasting 3 s and causing wear! Therefore disable S3 for now. - #select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - select GFXUMA - -config MAINBOARD_DIR - string - default lippert/toucan-af - -config MAINBOARD_PART_NUMBER - string - default "Toucan-AF" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 2 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config RAMBASE - hex - default 0x200000 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -#config VGA_BIOS_FILE -# string "VGA BIOS path and filename" -# depends on VGA_BIOS -# default "rom/video/OntarioGenericVbios.bin" - -config VGA_BIOS_ID - string - default "1002,9802" - -config SB800_AHCI_ROM - bool - default n - -config DRIVERS_PS2_KEYBOARD - bool - default n - -endif # BOARD_LIPPERT_TOUCAN_AF diff --git a/src/mainboard/lippert/toucan-af/Makefile.inc b/src/mainboard/lippert/toucan-af/Makefile.inc deleted file mode 100644 index 0630008..0000000 --- a/src/mainboard/lippert/toucan-af/Makefile.inc +++ /dev/null @@ -1,35 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -ifeq ($(CONFIG_AHCI_BIOS),y) -stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) -cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom -pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) -pci$(stripped_ahcibios_id).rom-type := optionrom -endif - -romstage-y += buildOpts.c -romstage-y += agesawrapper.c -romstage-y += BiosCallOuts.c -romstage-y += PlatformGnbPcie.c - -ramstage-y += buildOpts.c -ramstage-y += agesawrapper.c -ramstage-y += BiosCallOuts.c -ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/lippert/toucan-af/OptionsIds.h b/src/mainboard/lippert/toucan-af/OptionsIds.h deleted file mode 100644 index cf0a4be..0000000 --- a/src/mainboard/lippert/toucan-af/OptionsIds.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -#define IDSOPT_ASSERT_ENABLED TRUE - -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c b/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c deleted file mode 100644 index f8ba912..0000000 --- a/src/mainboard/lippert/toucan-af/PlatformGnbPcie.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "heapManager.h" -#include "PlatformGnbPcieComplex.h" -#include "Filecode.h" - -#include <string.h> - -#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE - -/*---------------------------------------------------------------------------------------*/ -/** - * OemCustomizeInitEarly - * - * Description: - * This stub function will call the host environment through the binary block - * interface (call-out port) to provide a user hook opportunity - * - * Parameters: - * @param[in] **PeiServices - * @param[in] *InitEarly - * - * @retval VOID - * - **/ -/*---------------------------------------------------------------------------------------*/ -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ) -{ - AGESA_STATUS Status; - VOID *BrazosPcieComplexListPtr; - VOID *BrazosPciePortPtr; - VOID *BrazosPcieDdiPtr; - - ALLOCATE_HEAP_PARAMS AllocHeapParams; - -PCIe_PORT_DESCRIPTOR PortList [] = { - // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) - { - 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) - { - 0, - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) - }, - // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), - PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) - } -}; - -PCIe_DDI_DESCRIPTOR DdiList [] = { - // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) - { - 0, //Descriptor flags - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) - {ConnectorTypeAutoDetect, Aux1, Hdp1} - }, - // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) - { - DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array - PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), - //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) - {ConnectorTypeAutoDetect, Aux2, Hdp2} - } -}; - -PCIe_COMPLEX_DESCRIPTOR Brazos = { - DESCRIPTOR_TERMINATE_LIST, - 0, - &PortList[0], - &DdiList[0] -}; - - // GNB PCIe topology Porting - - // - // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - // - AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); - - AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; - AllocHeapParams.Persist = HEAP_LOCAL_CACHE; - Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); - if ( Status!= AGESA_SUCCESS) { - // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR - ASSERT(FALSE); - return; - } - - BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(Brazos); - BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; - - AllocHeapParams.BufferPtr += sizeof(PortList); - BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; - - memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); - memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); - memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); - - - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; - ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; - - InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; - InitEarly->GnbConfig.PsppPolicy = 0; -} diff --git a/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h deleted file mode 100644 index 69e2615..0000000 --- a/src/mainboard/lippert/toucan-af/PlatformGnbPcieComplex.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H -#define _PLATFORM_GNB_PCIE_COMPLEX_H - -#include "Porting.h" -#include "AGESA.h" -#include "amdlib.h" -#include <cpu/amd/agesa/s3_resume.h> - -//GNB GPP Port4 -#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port5 -#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port6 -#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port7 -#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -//GNB GPP Port8 -#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable -#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 -#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 -#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) - //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) -#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced - -VOID -OemCustomizeInitEarly ( - IN OUT AMD_EARLY_PARAMS *InitEarly - ); - -#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/lippert/toucan-af/acpi/routing.asl b/src/mainboard/lippert/toucan-af/acpi/routing.asl deleted file mode 100644 index 2a61ce3..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/routing.asl +++ /dev/null @@ -1,407 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, INTC, 0 }, - Package(){0x0001FFFF, 1, INTD, 0 }, - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, INTD, 0 }, - Package(){0x0003FFFF, 1, INTA, 0 }, - Package(){0x0003FFFF, 2, INTB, 0 }, - Package(){0x0003FFFF, 3, INTC, 0 }, - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, INTB, 0 }, - Package(){0x0005FFFF, 1, INTC, 0 }, - Package(){0x0005FFFF, 2, INTD, 0 }, - Package(){0x0005FFFF, 3, INTA, 0 }, - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - - Package(){0x0009FFFF, 0, INTB, 0 }, - Package(){0x0009FFFF, 1, INTC, 0 }, - Package(){0x0009FFFF, 2, INTD, 0 }, - Package(){0x0009FFFF, 3, INTA, 0 }, - - Package(){0x000AFFFF, 0, INTC, 0 }, - Package(){0x000AFFFF, 1, INTD, 0 }, - Package(){0x000AFFFF, 2, INTA, 0 }, - Package(){0x000AFFFF, 3, INTB, 0 }, - - Package(){0x000BFFFF, 0, INTD, 0 }, - Package(){0x000BFFFF, 1, INTA, 0 }, - Package(){0x000BFFFF, 2, INTB, 0 }, - Package(){0x000BFFFF, 3, INTC, 0 }, - - Package(){0x000CFFFF, 0, INTA, 0 }, - Package(){0x000CFFFF, 1, INTB, 0 }, - Package(){0x000CFFFF, 2, INTC, 0 }, - Package(){0x000CFFFF, 3, INTD, 0 }, - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, INTD, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, INTC, 0 }, - Package(){0x0012FFFF, 1, INTB, 0 }, - - Package(){0x0013FFFF, 0, INTC, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - - Package(){0x0016FFFF, 0, INTC, 0 }, - Package(){0x0016FFFF, 1, INTB, 0 }, - - /* Package(){0x0014FFFF, 1, INTA, 0 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - - Package(){0x0015FFFF, 0, INTA, 0 }, - Package(){0x0015FFFF, 1, INTB, 0 }, - Package(){0x0015FFFF, 2, INTC, 0 }, - Package(){0x0015FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS780 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - Package(){0x0001FFFF, 0, 0, 18 }, - Package(){0x0001FFFF, 1, 0, 19 }, - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - Package(){0x0003FFFF, 1, 0, 16 }, - Package(){0x0003FFFF, 2, 0, 17 }, - Package(){0x0003FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - Package(){0x0004FFFF, 1, 0, 17 }, - Package(){0x0004FFFF, 2, 0, 18 }, - Package(){0x0004FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - Package(){0x0005FFFF, 1, 0, 18 }, - Package(){0x0005FFFF, 2, 0, 19 }, - Package(){0x0005FFFF, 3, 0, 16 }, - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - Package(){0x0006FFFF, 1, 0, 19 }, - Package(){0x0006FFFF, 2, 0, 16 }, - Package(){0x0006FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - Package(){0x0007FFFF, 1, 0, 16 }, - Package(){0x0007FFFF, 2, 0, 17 }, - Package(){0x0007FFFF, 3, 0, 18 }, - - /* Bus 0, Dev 9 - PCIe Bridge for network card */ - Package(){0x0009FFFF, 0, 0, 17 }, - Package(){0x0009FFFF, 1, 0, 16 }, - Package(){0x0009FFFF, 2, 0, 17 }, - Package(){0x0009FFFF, 3, 0, 18 }, - /* Bus 0, Dev A - PCIe Bridge for network card */ - Package(){0x000AFFFF, 0, 0, 18 }, - Package(){0x000AFFFF, 1, 0, 16 }, - Package(){0x000AFFFF, 2, 0, 17 }, - Package(){0x000AFFFF, 3, 0, 18 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0011FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package(){0x0012FFFF, 0, 0, 18 }, - Package(){0x0012FFFF, 1, 0, 17 }, - /* Package(){0x0012FFFF, 2, 0, 18 }, */ - - Package(){0x0013FFFF, 0, 0, 18 }, - Package(){0x0013FFFF, 1, 0, 17 }, - /* Package(){0x0013FFFF, 2, 0, 16 }, */ - - /* Package(){0x00140000, 0, 0, 16 }, */ - - Package(){0x0016FFFF, 0, 0, 18 }, - Package(){0x0016FFFF, 1, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - - /* TODO: pcie */ - Package(){0x0015FFFF, 0, 0, 16 }, - Package(){0x0015FFFF, 1, 0, 17 }, - Package(){0x0015FFFF, 2, 0, 18 }, - Package(){0x0015FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - Name(APR1, Package(){ - /* Internal graphics - RS780 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APS9, Package(){ - /* PCIe slot - Hooked to PCIe slot 9 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSa, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE0, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APE0, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PE1, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APE1, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PE2, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - Name(APE2, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PE3, Package(){ - /* PCIe slot - Hooked to PCIe slot 10 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APE3, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0003FFFF, 0, 0, 0x14 }, - Package(){0x0003FFFF, 1, 0, 0x15 }, - Package(){0x0003FFFF, 2, 0, 0x16 }, - Package(){0x0003FFFF, 3, 0, 0x17 }, - Package(){0x0004FFFF, 0, 0, 0x15 }, - Package(){0x0004FFFF, 1, 0, 0x16 }, - Package(){0x0004FFFF, 2, 0, 0x17 }, - Package(){0x0004FFFF, 3, 0, 0x14 }, - Package(){0x0005FFFF, 0, 0, 0x16 }, - Package(){0x0005FFFF, 1, 0, 0x17 }, - Package(){0x0005FFFF, 2, 0, 0x14 }, - Package(){0x0005FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/lippert/toucan-af/acpi/sata.asl b/src/mainboard/lippert/toucan-af/acpi/sata.asl deleted file mode 100644 index dcf6dec..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/lippert/toucan-af/acpi/superio.asl b/src/mainboard/lippert/toucan-af/acpi/superio.asl deleted file mode 100644 index 9be7492..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/superio.asl +++ /dev/null @@ -1,39 +0,0 @@ -/* - * SuperI/O devices - * - * This file is part of the coreboot project. - * - * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH - * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* PS/2 Keyboard */ -Device(KBC) { - Name(_HID, EISAID("PNP0303")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 1, 1) - IO(Decode16, 0x0064, 0x0064, 1, 1) - IRQNoFlags(){1} - }) -} - -/* PS/2 Mouse */ -Device(PS2M) { - Name(_HID, EISAID("PNP0F13")) - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){12} - }) -} diff --git a/src/mainboard/lippert/toucan-af/acpi/usb.asl b/src/mainboard/lippert/toucan-af/acpi/usb.asl deleted file mode 100644 index 2822ffd..0000000 --- a/src/mainboard/lippert/toucan-af/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/lippert/toucan-af/acpi_tables.c b/src/mainboard/lippert/toucan-af/acpi_tables.c deleted file mode 100644 index 588345e..0000000 --- a/src/mainboard/lippert/toucan-af/acpi_tables.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include "agesawrapper.h" -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdfam14.h> - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - int lens; - msr_t msr; - char pscope[] = "\_SB.PCI0"; - - lens = acpigen_write_scope(pscope); - msr = rdmsr(TOP_MEM); - lens += acpigen_write_name_dword("TOM1", msr.lo); - msr = rdmsr(TOP_MEM2); - /* - * Since XP only implements parts of ACPI 2.0, we can't use a qword - * here. - * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt - * slide 22ff. - * Shift value right by 20 bit to make it fit into 32bit, - * giving us 1MB granularity and a limit of almost 4Exabyte of memory. - */ - lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); - acpigen_patch_len(lens - 1); - return (unsigned long) (acpigen_get_current()); -} - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Just a dummy */ - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB800 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} - -unsigned long acpi_fill_hest(acpi_hest_t *hest) -{ - void *addr, *current; - - /* Skip the HEST header. */ - current = (void *)(hest + 1); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); - if (addr != NULL) - current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); - - return (unsigned long)current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_srat_t *srat; - acpi_slit_t *slit; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - acpi_header_t *ssdt; - acpi_header_t *ssdt2; - acpi_header_t *alib; - acpi_hest_t *hest; - - /* Align ACPI tables to 16 bytes */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* DSDT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - - /* FACS */ // it needs 64 bit alignment - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - /* FADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - /* - * We explicitly add these tables later on: - */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET Timers Linux wants an MADT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - /* HEST */ - current = ALIGN(current, 8); - hest = (acpi_hest_t *)current; - acpi_write_hest((void *)current); - acpi_add_table(rsdp, (void *)current); - current += ((acpi_header_t *)current)->length; - - /* SRAT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); - srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); - if (srat != NULL) { - memcpy((void *)current, srat, srat->header.length); - srat = (acpi_srat_t *) current; - current += srat->header.length; - acpi_add_table(rsdp, srat); - } - else { - printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); - } - - /* SLIT */ - current = ALIGN(current, 8); - printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); - slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); - if (slit != NULL) { - memcpy((void *)current, slit, slit->header.length); - slit = (acpi_slit_t *) current; - current += slit->header.length; - acpi_add_table(rsdp, slit); - } - else { - printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); - } - - /* SSDT */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); - alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); - if (alib != NULL) { - memcpy((void *)current, alib, alib->length); - alib = (acpi_header_t *) current; - current += alib->length; - acpi_add_table(rsdp, (void *)alib); - } else { - printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); - } - - /* The DSDT needs additional work for the AGESA SSDT Pstate table */ - /* Keep the comment for a while. */ - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); - ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); - if (ssdt != NULL) { - memcpy((void *)current, ssdt, ssdt->length); - ssdt = (acpi_header_t *) current; - current += ssdt->length; - acpi_add_table(rsdp,ssdt); - } else { - printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); - } - - current = ALIGN(current, 16); - printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); - ssdt2 = (acpi_header_t *) current; - acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); - current += ssdt2->length; - acpi_add_table(rsdp,ssdt2); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/lippert/toucan-af/agesawrapper.c b/src/mainboard/lippert/toucan-af/agesawrapper.c deleted file mode 100644 index fc0bee2..0000000 --- a/src/mainboard/lippert/toucan-af/agesawrapper.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "agesawrapper.h" -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include "PlatformGnbPcieComplex.h" - -#define __SIMPLE_DEVICE__ - -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/mtrr.h> -#include <stdint.h> -#include <string.h> - -#include <cpu/amd/agesa/s3_resume.h> -#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> - -#define FILECODE UNASSIGNED_FILE_FILECODE - -#define MMCONF_ENABLE 1 - -/* ACPI table pointers returned by AmdInitLate */ -VOID *DmiTable = NULL; -VOID *AcpiPstate = NULL; -VOID *AcpiSrat = NULL; -VOID *AcpiSlit = NULL; - -VOID *AcpiWheaMce = NULL; -VOID *AcpiWheaCmc = NULL; -VOID *AcpiAlib = NULL; - -/*------------------------------------------------------------------------------ - * T Y P E D E F S A N D S T R U C T U R E S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * P R O T O T Y P E S O F L O C A L F U N C T I O N S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * E X P O R T E D F U N C T I O N S - *------------------------------------------------------------------------------ - */ - -/*------------------------------------------------------------------------------ - * L O C A L F U N C T I O N S - *------------------------------------------------------------------------------ - */ -AGESA_STATUS agesawrapper_amdinitcpuio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* The platform BIOS needs to ensure the memory ranges of SB800 legacy - * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are - * set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 - PciData |= 1 << 7; // set NP (non-posted) bit - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); - PciData = 0x00FECF00; // last address before non-posted range - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); - PciData = 0x0000F000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitmmio ( - VOID - ) -{ - AGESA_STATUS Status; - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; - - UINT8 BusRangeVal = 0; - UINT8 BusNum; - UINT8 Index; - - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - - for (Index = 0; Index < 8; Index++) { - BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; - if (BusNum == 1) { - BusRangeVal = Index; - break; - } - } - - MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); - - /* - Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. - */ - LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); - MsrReg = MsrReg | 0x0000400000000000ull; - LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); - - /* Set Ontario Link Data */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); - PciData = 0x01308002; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); - PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - - Status = AGESA_SUCCESS; - return Status; -} - -AGESA_STATUS agesawrapper_amdinitreset ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESET_PARAMS AmdResetParams; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; - AmdParamStruct.AllocationMethod = ByHost; - AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); - AmdParamStruct.NewStructPtr = &AmdResetParams; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = NULL; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - AmdResetParams.HtConfig.Depth = 0; - - status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - return status; -} - -AGESA_STATUS agesawrapper_amdinitearly ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_EARLY_PARAMS *AmdEarlyParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; - OemCustomizeInitEarly (AmdEarlyParamsPtr); - - status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitpost ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - /* Initialize heap space */ - EmptyHeap(); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitenv ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - PCI_ADDR PciAddress; - UINT32 PciValue; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - /* Initialize Subordinate Bus Number and Secondary Bus Number - * In platform BIOS this address is allocated by PCI enumeration code - Modify D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - /* Write to D1F0x18 */ - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x00010100; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Legacy Bridge Mode - * Modify B1D5F0x18 - */ - PciAddress.Address.Bus = 1; - PciAddress.Address.Device = 5; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Legacy Bridge Mode - * Modify B1D5F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize GMM Base Address for Pcie Mode - * Modify B0D1F0x18 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x18; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize FB Base Address for Pcie Mode - * Modify B0D1F0x10 - */ - PciAddress.Address.Register = 0x10; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x80000000; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Base and Limit Address - * Modify B0D1F0x20 - */ - PciAddress.Address.Bus = 0; - PciAddress.Address.Device = 1; - PciAddress.Address.Function = 0; - PciAddress.Address.Register = 0x20; - - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x96009600; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - - /* Initialize MMIO Prefetchable Memory Limit and Base - * Modify B0D1F0x24 - */ - PciAddress.Address.Register = 0x24; - LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - PciValue |= 0x8FF18001; - LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -VOID * -agesawrapper_getlateinitptr ( - int pick - ) -{ - switch (pick) { - case PICK_DMI: - return DmiTable; - case PICK_PSTATE: - return AcpiPstate; - case PICK_SRAT: - return AcpiSrat; - case PICK_SLIT: - return AcpiSlit; - case PICK_WHEA_MCE: - return AcpiWheaMce; - case PICK_WHEA_CMC: - return AcpiWheaCmc; - case PICK_ALIB: - return AcpiAlib; - default: - return NULL; - } -} - -AGESA_STATUS agesawrapper_amdinitmid ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - - /* Enable MMIO on AMD CPU Address Map Controller */ - agesawrapper_amdinitcpuio (); - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - - status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amdinitlate ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_LATE_PARAMS * AmdLateParamsPtr; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; - AmdParamStruct.AllocationMethod = PostMemDram; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - - AmdCreateStruct (&AmdParamStruct); - AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; - - printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); - - Status = AmdInitLate (AmdLateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - DmiTable = AmdLateParamsPtr->DmiTable; - AcpiPstate = AmdLateParamsPtr->AcpiPState; - AcpiSrat = AmdLateParamsPtr->AcpiSrat; - AcpiSlit = AmdLateParamsPtr->AcpiSlit; - AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; - AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; - AcpiAlib = AmdLateParamsPtr->AcpiAlib; - - printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" - " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" - " Mce:%p\n Cmc:%p\n Alib:%p\n", - __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, - AcpiWheaMce, AcpiWheaCmc, AcpiAlib); - - /* Don't release the structure until coreboot has copied the ACPI tables. - * AmdReleaseStruct (&AmdLateParams); - */ - - return Status; -} - -AGESA_STATUS agesawrapper_amdinitresume ( - VOID - ) -{ - AGESA_STATUS status; - AMD_INTERFACE_PARAMS AmdParamStruct; - AMD_RESUME_PARAMS *AmdResumeParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; - AmdParamStruct.AllocationMethod = PreMemHeap; - AmdParamStruct.StdHeader.AltImageBasePtr = 0; - AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdParamStruct.StdHeader.Func = 0; - AmdParamStruct.StdHeader.ImageBasePtr = 0; - AmdCreateStruct (&AmdParamStruct); - - AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; - - AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; - AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeNonVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, - (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); - - status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); - - if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); - AmdReleaseStruct (&AmdParamStruct); - - return status; -} - -AGESA_STATUS agesawrapper_amds3laterestore ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - AMD_S3LATE_PARAMS AmdS3LateParams; - AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; - S3_DATA_TYPE S3DataType; - - memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.AllocationMethod = ByHost; - AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; - AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdS3LateParamsPtr = &AmdS3LateParams; - AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); - - AmdCreateStruct (&AmdInterfaceParams); - - AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; - S3DataType = S3DataTypeVolatile; - - OemAgesaGetS3Info (S3DataType, - (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, - (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); - - Status = AmdS3LateRestore (AmdS3LateParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -#ifndef __PRE_RAM__ -AGESA_STATUS agesawrapper_amdS3Save ( - VOID - ) -{ - AGESA_STATUS Status; - AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; - AMD_INTERFACE_PARAMS AmdInterfaceParams; - S3_DATA_TYPE S3DataType; - - memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); - - AmdInterfaceParams.StdHeader.ImageBasePtr = 0; - AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; - AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - AmdInterfaceParams.AllocationMethod = PostMemDram; - AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; - AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; - AmdInterfaceParams.StdHeader.Func = 0; - AmdCreateStruct(&AmdInterfaceParams); - - AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; - AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; - - Status = AmdS3Save (AmdS3SaveParamsPtr); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - S3DataType = S3DataTypeNonVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.NvStorage); - - if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { - S3DataType = S3DataTypeVolatile; - - Status = OemAgesaSaveS3Info ( - S3DataType, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, - AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage - ); - } - - OemAgesaSaveMtrr(); - AmdReleaseStruct (&AmdInterfaceParams); - - return Status; -} -#endif /* #ifndef __PRE_RAM__ */ - -AGESA_STATUS agesawrapper_amdlaterunaptask ( - UINT32 Func, - UINT32 Data, - VOID *ConfigPtr - ) -{ - AGESA_STATUS Status; - AP_EXE_PARAMS ApExeParams; - - memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); - - ApExeParams.StdHeader.AltImageBasePtr = 0; - ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; - ApExeParams.StdHeader.Func = 0; - ApExeParams.StdHeader.ImageBasePtr = 0; - ApExeParams.FunctionNumber = Func; - ApExeParams.RelatedDataBlock = ConfigPtr; - - Status = AmdLateRunApTask (&ApExeParams); - if (Status != AGESA_SUCCESS) { - agesawrapper_amdreadeventlog(); - ASSERT(Status == AGESA_SUCCESS); - } - - return Status; -} - -AGESA_STATUS agesawrapper_amdreadeventlog ( - VOID - ) -{ - AGESA_STATUS Status; - EVENT_PARAMS AmdEventParams; - - memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); - - AmdEventParams.StdHeader.AltImageBasePtr = 0; - AmdEventParams.StdHeader.CalloutPtr = NULL; - AmdEventParams.StdHeader.Func = 0; - AmdEventParams.StdHeader.ImageBasePtr = 0; - Status = AmdReadEventLog (&AmdEventParams); - while (AmdEventParams.EventClass != 0) { - printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); - printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); - printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); - Status = AmdReadEventLog (&AmdEventParams); - } - - return Status; -} diff --git a/src/mainboard/lippert/toucan-af/agesawrapper.h b/src/mainboard/lippert/toucan-af/agesawrapper.h deleted file mode 100644 index a74a800..0000000 --- a/src/mainboard/lippert/toucan-af/agesawrapper.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _AGESAWRAPPER_H_ -#define _AGESAWRAPPER_H_ - -#include <stdint.h> -#include "Porting.h" -#include "AGESA.h" - -/* Define AMD Ontario APPU SSID/SVID */ -#define AMD_APU_SVID 0x1022 -#define AMD_APU_SSID 0x1234 -#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS - -enum { - PICK_DMI, /* DMI Interface */ - PICK_PSTATE, /* Acpi Pstate SSDT Table */ - PICK_SRAT, /* SRAT Table */ - PICK_SLIT, /* SLIT Table */ - PICK_WHEA_MCE, /* WHEA MCE table */ - PICK_WHEA_CMC, /* WHEA CMV table */ - PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ -}; - -AGESA_STATUS agesawrapper_amdinitreset(void); -AGESA_STATUS agesawrapper_amdinitearly(void); -AGESA_STATUS agesawrapper_amdinitenv(void); -AGESA_STATUS agesawrapper_amdinitlate(void); -AGESA_STATUS agesawrapper_amdinitpost(void); -AGESA_STATUS agesawrapper_amdinitmid(void); - -AGESA_STATUS agesawrapper_amdreadeventlog(void); - -AGESA_STATUS agesawrapper_amdinitcpuio(void); -AGESA_STATUS agesawrapper_amdinitmmio(void); -AGESA_STATUS agesawrapper_amdinitresume(void); -AGESA_STATUS agesawrapper_amdS3Save(void); -AGESA_STATUS agesawrapper_amds3laterestore(void); -AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); -void *agesawrapper_getlateinitptr (int pick); - -#endif diff --git a/src/mainboard/lippert/toucan-af/board_info.txt b/src/mainboard/lippert/toucan-af/board_info.txt deleted file mode 100644 index 77acfae..0000000 --- a/src/mainboard/lippert/toucan-af/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: half -Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/lippert/toucan-af/buildOpts.c b/src/mainboard/lippert/toucan-af/buildOpts.c deleted file mode 100644 index a6e4472..0000000 --- a/src/mainboard/lippert/toucan-af/buildOpts.c +++ /dev/null @@ -1,459 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Core - * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ - */ - -#include <stdlib.h> - -#include "Filecode.h" -#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE - - -/* Select the cpu family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT TRUE -#define INSTALL_FAMILY_15_SUPPORT FALSE - -/* Select the cpu socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP1_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT TRUE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE - -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE -#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE -#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE - -#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE -#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE - -#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE -#define BLDOPT_REMOVE_ECC_SUPPORT FALSE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE -#define BLDOPT_REMOVE_DQS_TRAINING FALSE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -#define BLDOPT_REMOVE_ACPI_PSTATES FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE - #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE - #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_SLIT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_DMI TRUE -#define BLDOPT_REMOVE_HT_ASSIST TRUE -#define BLDOPT_REMOVE_ATM_MODE TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE -//#define BLDOPT_REMOVE_C6_STATE TRUE -#define BLDOPT_REMOVE_GFX_RECOVERY TRUE -#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE - -/* - * Agesa entry points used in this implementation. - */ -#define AGESA_ENTRY_INIT_RESET TRUE -#define AGESA_ENTRY_INIT_RECOVERY FALSE -#define AGESA_ENTRY_INIT_EARLY TRUE -#define AGESA_ENTRY_INIT_POST TRUE -#define AGESA_ENTRY_INIT_ENV TRUE -#define AGESA_ENTRY_INIT_MID TRUE -#define AGESA_ENTRY_INIT_LATE TRUE -#define AGESA_ENTRY_INIT_S3SAVE TRUE -#define AGESA_ENTRY_INIT_RESUME TRUE -#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE -#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -#define BLDCFG_VRM_CURRENT_LIMIT 24000 -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 -#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 -#define BLDCFG_VRM_SLEW_RATE 5000 -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 -//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 - -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE -#define BLDCFG_PLAT_NUM_IO_APICS 3 -//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled -//#define BLDCFG_PLATFORM_C1E_OPDATA 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 -#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 -//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -//#define BLDCFG_STARTING_BUSNUM 0 -//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 -//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 -//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 -//#define BLDCFG_BUID_SWAP_LIST 0 -//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 -//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 -//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 -//#define BLDCFG_BUS_NUMBERS_LIST 0 -//#define BLDCFG_IGNORE_LINK_LIST 0 -//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 -//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 -//#define BLDCFG_USE_HT_ASSIST TRUE -//#define BLDCFG_USE_ATM_MODE TRUE -//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm -#define BLDCFG_S3_LATE_RESTORE TRUE -//#define BLDCFG_USE_32_BYTE_REFRESH FALSE -//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE -//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance -//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE -//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 -#define BLDCFG_CFG_GNB_HD_AUDIO FALSE -//#define BLDCFG_CFG_ABM_SUPPORT FALSE -//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 -//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 -//#define BLDCFG_MEM_INIT_PSTATE 0 -//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -//#define BLDCFG_ONLINE_SPARE FALSE -//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -//#define BLDCFG_ENABLE_ECC_FEATURE TRUE -//#define BLDCFG_ECC_REDIRECTION FALSE -//#define BLDCFG_SCRUB_DRAM_RATE 0 -//#define BLDCFG_SCRUB_L2_RATE 0 -//#define BLDCFG_SCRUB_L3_RATE 0 -//#define BLDCFG_SCRUB_IC_RATE 0 -//#define BLDCFG_SCRUB_DC_RATE 0 -//#define BLDCFG_ECC_SYNC_FLOOD 0 -//#define BLDCFG_ECC_SYMBOL_SIZE 0 -//#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO -#define BLDCFG_UMA_ALLOCATION_SIZE 0 -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 - -/* - * Agesa configuration values selection. - * Uncomment and specify the value for the configuration options - * needed by the system. - */ -#include "AGESA.h" -#include "CommonReturns.h" - -/* The fixed MTRR values to be set after memory initialization. */ -CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = -{ - { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, - { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, - { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, - { CPU_LIST_TERMINAL } -}; - -/* Include the files that instantiate the configuration definitions. */ - -#include "cpuRegisters.h" -#include "cpuFamRegisters.h" -#include "cpuFamilyTranslation.h" -#include "AdvancedApi.h" -#include "heapManager.h" -#include "CreateStruct.h" -#include "cpuFeatures.h" -#include "Table.h" -#include "cpuEarlyInit.h" -#include "cpuLateInit.h" -#include "GnbInterface.h" - -/***************************************************************************** - * Define the RELEASE VERSION string - * - * The Release Version string should identify the next planned release. - * When a branch is made in preparation for a release, the release manager - * should change/confirm that the branch version of this file contains the - * string matching the desired version for the release. The trunk version of - * the file should always contain a trailing 'X'. This will make sure that a - * development build from trunk will not be confused for a released version. - * The release manager will need to remove the trailing 'X' and update the - * version string as appropriate for the release. The trunk copy of this file - * should also be updated/incremented for the next expected version, + trailing 'X' - ****************************************************************************/ -// This is the delivery package title, "BrazosPI" -// This string MUST be exactly 8 characters long -#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} - -// This is the release version number of the AGESA component -// This string MUST be exactly 12 characters long -#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} - -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -// The following definitions specify the default values for various parameters in which there are -// no clearly defined defaults to be used in the common file. The values below are based on product -// and BKDG content, please consult the AGESA Memory team for consultation. -#define DFLT_SCRUB_DRAM_RATE (0) -#define DFLT_SCRUB_L2_RATE (0) -#define DFLT_SCRUB_L3_RATE (0) -#define DFLT_SCRUB_IC_RATE (0) -#define DFLT_SCRUB_DC_RATE (0) -#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define DFLT_VRM_SLEW_RATE (5000) - -// Instantiate all solution relevant data. -#include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" - -//DA Customer table -CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = -{ - // Hardcoded Memory Training Values - - // The following macro should be used to override training values for your platform - // - // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), - // - // NOTE: - // The following training hardcode values are example values that were taken from a tilapia motherboard - // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in - // the table and replace the byte lane values with your own. - // - // ------------------ BYTE LANES ---------------------- - // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC - // Write Data Timing - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 - // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 - - // DQS Receiver Enable - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 - // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 - - // Write DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 - - // Read DQS Delays - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 - // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 - //-------------------------------------------------------------------------------------------------------------------------------------------------- - // TABLE END - NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table -}; -CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); - -/* *************************************************************************** - * Optional User code to be included into the AGESA build - * These may be 32-bit call-out routines... - */ -//AGESA_STATUS -//AgesaReadSpd ( -// IN UINTN FcnData, -// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd -// ) -//{ -// /* platform code to read an SPD... */ -// return Status; -//} diff --git a/src/mainboard/lippert/toucan-af/cmos.layout b/src/mainboard/lippert/toucan-af/cmos.layout deleted file mode 100644 index ab65be0..0000000 --- a/src/mainboard/lippert/toucan-af/cmos.layout +++ /dev/null @@ -1,116 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -#***************************************************************************** - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb deleted file mode 100644 index afd6b25..0000000 --- a/src/mainboard/lippert/toucan-af/devicetree.cb +++ /dev/null @@ -1,116 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# -chip northbridge/amd/agesa/family14/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] - #device pci 1.1 on end # Internal HDMI Audio - device pci 4.0 on end # PCIE P2P bridge - device pci 5.0 on end # PCIE P2P bridge - device pci 6.0 on end # PCIE P2P bridge - device pci 7.0 on end # PCIE P2P bridge on-board NIC - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge - - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 off end - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/winbond/w83627dhg - device pnp 4e.0 off end # Floppy - device pnp 4e.1 off end # Parallel Port - device pnp 4e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # Keyboard, Mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - #device pnp 4e.6 off end # SPI - device pnp 4e.307 off end # GPIO6 - device pnp 4e.8 off end # WDTO, PLED - device pnp 4e.009 off end # GPIO2 - device pnp 4e.109 off end # GPIO3 - device pnp 4e.209 off end # GPIO4 - device pnp 4e.309 off end # GPIO5 - device pnp 4e.A off end # ACPI - device pnp 4e.B off end # HW Monitor - end # w83627dhg - end #LPC - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 off end # OHCI FS/LS USB - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA - device pci 15.1 on end # PCIe PortB - device pci 15.2 on end # PCIe PortC - device pci 15.3 on end # PCIe PortD - device pci 16.0 off end # OHCI USB 10-13 - device pci 16.2 off end # EHCI USB 10-13 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end - device pci 18.6 on end - device pci 18.7 on end - - register "spdAddrLookup" = " - { - { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses - { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses - }" - - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/toucan-af/dsdt.asl b/src/mainboard/lippert/toucan-af/dsdt.asl deleted file mode 100644 index 3e0fe36..0000000 --- a/src/mainboard/lippert/toucan-af/dsdt.asl +++ /dev/null @@ -1,1834 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (_PR) { /* define processor scope */ - Processor( - C000, /* name space name, align with BLDCFG_PROCESSOR_SCOPE_NAME[01] */ - 0, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - - Processor( - C001, /* name space name */ - 1, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - Processor( - C002, /* name space name */ - 2, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - Processor( - C003, /* name space name */ - 3, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - } - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h. */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PIRA, 0x00000008, /* Index 0 */ - PIRB, 0x00000008, /* Index 1 */ - PIRC, 0x00000008, /* Index 2 */ - PIRD, 0x00000008, /* Index 3 */ - PIRE, 0x00000008, /* Index 4 */ - PIRF, 0x00000008, /* Index 5 */ - PIRG, 0x00000008, /* Index 6 */ - PIRH, 0x00000008, /* Index 7 */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PIRA) - Store(0, PIRB) - Store(0, PIRC) - Store(0, PIRD) - Store(0, PIRE) - Store(0, PIRF) - Store(0, PIRG) - Store(0, PIRH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PIRA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PIRA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PIRB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PIRB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PIRC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PIRC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIRD) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIRD) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRD, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRD) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PIRE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PIRE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PIRF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PIRF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PIRG) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PIRG) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRG, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRG) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PIRH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PIRH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIRH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIRH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - /* Notify (_TZ.TZ00, 0x80) */ - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) - Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ - Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - /* Operating System Capabilities Method */ - Method(_OSC,4) - { /* Check for proper PCI/PCIe UUID */ - If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - } - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* GPP */ - Device(PBR9) { - Name(_ADR, 0x00090000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS9) } /* APIC mode */ - Return (PS9) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR9 */ - - Device(PBRa) { - Name(_ADR, 0x000A0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSa) } /* APIC mode */ - Return (PSa) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRa */ - - Device(PE20) { - Name(_ADR, 0x00150000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE0) } /* APIC mode */ - Return (PE0) /* PIC Mode */ - } /* end _PRT */ - } /* end PE20 */ - Device(PE21) { - Name(_ADR, 0x00150001) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE1) } /* APIC mode */ - Return (PE1) /* PIC Mode */ - } /* end _PRT */ - } /* end PE21 */ - Device(PE22) { - Name(_ADR, 0x00150002) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE2) } /* APIC mode */ - Return (APE2) /* PIC Mode */ - } /* end _PRT */ - } /* end PE22 */ - Device(PE23) { - Name(_ADR, 0x00150003) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APE3) } /* APIC mode */ - Return (PE3) /* PIC Mode */ - } /* end _PRT */ - } /* end PE23 */ - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00120000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00120002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00160000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UOH6) { - Name(_ADR, 0x00160002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00140005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#if 0 - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ -#endif - #include "acpi/superio.asl" - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - Name(CRES, ResourceTemplate() { - /* Set the Bus number and Secondary Bus number for the PCI0 device - * The Secondary bus range for PCI0 lets the system - * know what bus values are allowed on the downstream - * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which - * range from [0-0xFF] but they do not need to be - * sequential. - */ - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x00FF, /* range maximum */ - 0x0000, /* translation */ - 0x0100, /* length */ - ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ - - IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ -#if 0 - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) -#endif - /* memory space for PCI BARs below 4GB */ - Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ -#if 0 - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * Subtract(TOM2, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } -#endif - CreateDWordField(CRES, ^MMIO._BAS, MM1B) - CreateDWordField(CRES, ^MMIO._LEN, MM1L) - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, MM1B) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, MM1L) - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ -#if 0 - /* SMBUS Support */ - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -#endif -} -/* End of ASL file */ diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c deleted file mode 100644 index 12a64a8..0000000 --- a/src/mainboard/lippert/toucan-af/irq_tables.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdfam14.h> - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - - - slot_num++; - - - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/lippert/toucan-af/mainboard.c b/src/mainboard/lippert/toucan-af/mainboard.c deleted file mode 100644 index 9e44a21..0000000 --- a/src/mainboard/lippert/toucan-af/mainboard.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdlib.h> -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb800/sb800.h> -#include <arch/acpi.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <cpu/amd/agesa/s3_resume.h> -#include <cpu/amd/mtrr.h> -#include "SBPLATFORM.h" -#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ -#include <southbridge/amd/cimx/sb800/gpio_oem.h> - -/* Write data block to slave on SMBUS0. */ -#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) -#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) -#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) -#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) -#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) -#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) -static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) -{ - __outbyte(SMB0_STATUS, 0x1E); // clear error status - __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out - __outbyte(SMB0_HOSTCMD, command); // or destination offset - __outbyte(SMB0_DATA0, length); // sent before data - __inbyte(SMB0_CONTROL); // reset block data array - while (length--) - __outbyte(SMB0_BLOCKDATA, *(data++)); - __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ - - while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors - return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors -} - -static void init(struct device *dev) -{ - volatile u8 *spi_base; // base addr of Hudson's SPI host controller - int i; - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); - - /* Init Hudson GPIOs. */ - printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); - FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices - FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed - FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# - FCH_GPIO (197) = 0x28; // = input, disable int. pull-up - FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0 - FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups - FCH_IOMUX( 57) = 1; - FCH_GPIO ( 57) = 0x28; - FCH_IOMUX( 58) = 1; - FCH_GPIO ( 58) = 0x28; - FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector - FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0 - FCH_IOMUX(188) = 2; - FCH_GPIO (188) = 0x08; - FCH_IOMUX(166) = 2; - FCH_GPIO (166) = 0x08; - // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1) - FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01; - FCH_IOMUX(160) = 1; - FCH_GPIO (160) = 0x08; - FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector - FCH_IOMUX(190) = 1; // default to inputs with int. PU - FCH_IOMUX(191) = 1; - FCH_IOMUX(192) = 1; - if (!fch_gpio_state(197)) // just in case anyone cares - printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); - printk(BIOS_INFO, "Board revision ID: %u\n", - fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); - - /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ - spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); - spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register - - /* Notify the SMC we're alive and kicking, or after a while it will - * effect a power cycle and switch to the alternate BIOS chip. - * Should be done as late as possible. */ - printk(BIOS_INFO, "Sending BIOS alive message\n"); - const u8 i_am_alive[] = { 0x03 }; //bit2=SEL_DP0: 0=DDI2, 1=LVDS - if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) - printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); - - printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); -} - -void set_pcie_reset(void); -void set_pcie_dereset(void); - -/** - * TODO - * SB CIMx callback - */ -void set_pcie_reset(void) -{ -} - -/** - * TODO - * mainboard specific SB CIMx callback - */ -void set_pcie_dereset(void) -{ -} - - -/********************************************** - * Enable the dedicated functions of the board. - **********************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); - dev->ops->init = init; - - /* enable GPP CLK0 thru CLK1 */ - /* disable GPP CLK2 thru SLT_GFX_CLK */ - u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); - *(misc_mem_clk_cntrl + 0) = 0xFF; - *(misc_mem_clk_cntrl + 1) = 0x00; - *(misc_mem_clk_cntrl + 2) = 0x00; - *(misc_mem_clk_cntrl + 3) = 0x00; - *(misc_mem_clk_cntrl + 4) = 0x00; - - /* - * Initialize ASF registers to an arbitrary address because someone - * long ago set things up this way inside the SPD read code. The - * SPD read code has been made generic and moved out of the board - * directory, so the ASF init is being done here. - */ - pm_iowrite(0x29, 0x80); - pm_iowrite(0x28, 0x61); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/lippert/toucan-af/mptable.c b/src/mainboard/lippert/toucan-af/mptable.c deleted file mode 100644 index 078601e..0000000 --- a/src/mainboard/lippert/toucan-af/mptable.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam14.h> -#include <SBPLATFORM.h> - -u8 intr_data[] = { - [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ - [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ - [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x10,0x11,0x12,0x13 -}; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - /* - * By the time this function gets called, the IOAPIC registers - * have been written so they can be read to get the correct - * APIC ID and Version - */ - u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); - u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - memcpy(mc->mpc_oem, "AMD ", 8); - - smp_write_processors(mc); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); - - u8 byte; - - for (byte = 0x0; byte < sizeof(intr_data); byte ++) { - outb(byte | 0x80, 0xC00); - outb(intr_data[byte], 0xC01); - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) - - /* APU Internal Graphic Device*/ - PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); - PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); - - //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* Southbridge HD Audio: */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - - PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ - PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); - PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); - PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); - PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); - PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); - - /* sata */ - PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); - - /* on board NIC & Slot PCIE. */ - - /* PCI slots */ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /* PCIe PortA */ - PCI_INT(0x0, 0x15, 0x0, 0x10); - /* PCIe PortB */ - PCI_INT(0x0, 0x15, 0x1, 0x11); - /* PCIe PortC */ - PCI_INT(0x0, 0x15, 0x2, 0x12); - /* PCIe PortD */ - PCI_INT(0x0, 0x15, 0x3, 0x13); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/lippert/toucan-af/platform_cfg.h b/src/mainboard/lippert/toucan-af/platform_cfg.h deleted file mode 100644 index 25b0485..0000000 --- a/src/mainboard/lippert/toucan-af/platform_cfg.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x0F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1E - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 1 - -static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */ -{ - /* NID, PinConfig (Verbs 71F..C) */ - {0x11, 0x411111F0}, /* NPC */ - {0x12, 0x411111F0}, /* DMIC */ - {0x14, 0x01214110}, /* FRONT (Port-D) */ - {0x15, 0x01011112}, /* SURR (Port-A) */ - {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ - {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ - {0x18, 0x01A19930}, /* MIC1 (Port-B) */ - {0x19, 0x411111F0}, /* MIC2 (Port-F) */ - {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ - {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ - {0x1C, 0x411111F0}, /* CD-IN */ - {0x1D, 0x40132601}, /* BEEP-IN */ - {0x1E, 0x01441120}, /* S/PDIF-OUT */ - {0x1F, 0x01C46140}, /* S/PDIF-IN */ - {0xff, 0xffffffff} /* end of table */ -}; - -static const CODECTBLLIST codec_tablelist[] = -{ - {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]}, - {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -/* set up an ACPI preferred power management profile */ -/* from acpi.h - * PM_UNSPECIFIED = 0, - * PM_DESKTOP = 1, - * PM_MOBILE = 2, - * PM_WORKSTATION = 3, - * PM_ENTERPRISE_SERVER = 4, - * PM_SOHO_SERVER = 5, - * PM_APPLIANCE_PC = 6, - * PM_PERFORMANCE_SERVER = 7, - * PM_TABLET = 8 - */ -#define FADT_PM_PROFILE 1 - -#endif diff --git a/src/mainboard/lippert/toucan-af/romstage.c b/src/mainboard/lippert/toucan-af/romstage.c deleted file mode 100644 index f9b9adf..0000000 --- a/src/mainboard/lippert/toucan-af/romstage.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/stages.h> -#include <device/pnp_def.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <console/loglevel.h> -#include <cpu/x86/mtrr.h> -#include "cpu/amd/car.h" -#include "agesawrapper.h" -#include <northbridge/amd/agesa/agesawrapper_call.h> -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include "cpu/x86/lapic.h" -#include <cpu/x86/cache.h> -#include <sb_cimx.h> -#include "SBPLATFORM.h" -#include "cbmem.h" -#include "cpu/amd/mtrr.h" -#include "cpu/amd/agesa/s3_resume.h" - - -#define SERIAL_DEV PNP_DEV(0x4e, W83627DHG_SP1) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* - * All cores: allow caching of flash chip code and data - * (there are no cache-as-ram reliability concerns with family 14h) - */ - __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); - __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); - - /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ - __writemsr (0xc0010062, 0); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x30); - sb_Poweron_Init(); - - post_code(0x31); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - } - - /* Halt if there was a built in self test failure */ - post_code(0x34); - report_bist_failure(bist); - - /* Load MPB */ - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x35); - AGESAWRAPPER(amdinitmmio); - - post_code(0x37); - AGESAWRAPPER(amdinitreset); - - post_code(0x39); - AGESAWRAPPER(amdinitearly); - - int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); - if (!s3resume) { - post_code(0x40); - /* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all - * hang, looks like DRAM re-init goes wrong, don't know why. */ - val = AGESAWRAPPER(amdinitpost); - if (val == 7) /* fatal, amdinitenv below is going to hang */ - outb(0x06, 0x0cf9); /* reset system harder instead */ - - post_code(0x42); - AGESAWRAPPER(amdinitenv); - - } else { /* S3 detect */ - printk(BIOS_INFO, "S3 detected\n"); - - post_code(0x60); - AGESAWRAPPER(amdinitresume); - - AGESAWRAPPER(amds3laterestore); - - post_code(0x61); - prepare_for_resume(); - } - - post_code(0x50); - copy_and_run(); - printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); - - post_code(0x54); /* Should never see this post code. */ -} diff --git a/src/mainboard/lippert/toucan_af/BiosCallOuts.c b/src/mainboard/lippert/toucan_af/BiosCallOuts.c new file mode 100644 index 0000000..4b30c39 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/BiosCallOuts.c @@ -0,0 +1,76 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "SB800.h" +#include <southbridge/amd/cimx/sb800/gpio_oem.h> +#include "heapManager.h" +#include <stdlib.h> + +/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess? + * + * COM Express doesn't provide dedicated resets for individual lanes + * and it's not needed for the on-board Intel I210 GbE controller. + */ + +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr); + +const BIOS_CALLOUT_STRUCT BiosCallouts[] = +{ + {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer }, + {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer }, + {AGESA_LOCATE_BUFFER, agesa_LocateBuffer }, + {AGESA_DO_RESET, agesa_Reset }, + {AGESA_READ_SPD, agesa_ReadSpd }, + {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, + {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, + {AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported }, + {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit}, + {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, + {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, +}; +const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); + +/* Call the host environment interface to provide a user hook opportunity. */ +static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr) +{ + MEM_DATA_STRUCT *MemData = ConfigPtr; + + printk(BIOS_INFO, "Setting DDR3 voltage: "); + FCH_IOMUX(65) = 1; // GPIO65: VMEM_LV_EN# lowers VMEM from 1.5 to 1.35V + switch (MemData->ParameterListPtr->DDR3Voltage) { + case VOLT1_25: // board is not able to provide this + MemData->ParameterListPtr->DDR3Voltage = VOLT1_35; // sorry + printk(BIOS_INFO, "can't provide 1.25 V, using "); + // fall through + default: // AGESA.h says in mixed case 1.5V DIMMs get excluded + case VOLT1_35: + FCH_GPIO(65) = 0x08; // = output, disable PU, set to 0 + printk(BIOS_INFO, "1.35 V\n"); + break; + case VOLT1_5: + FCH_GPIO(65) = 0xC8; // = output, disable PU, set to 1 + printk(BIOS_INFO, "1.5 V\n"); + } + + return AGESA_SUCCESS; +} diff --git a/src/mainboard/lippert/toucan_af/Kconfig b/src/mainboard/lippert/toucan_af/Kconfig new file mode 100644 index 0000000..f69939d --- /dev/null +++ b/src/mainboard/lippert/toucan_af/Kconfig @@ -0,0 +1,101 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +if BOARD_LIPPERT_TOUCAN_AF + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_AGESA_FAMILY14 + select NORTHBRIDGE_AMD_AGESA_FAMILY14 + select SOUTHBRIDGE_AMD_CIMX_SB800 + # The Toucan-AF is meant to work on any COM Express Type 6 baseboard. + # The ADLINK ExpressBase-6 baseboard happens to use this SIO: + select SUPERIO_WINBOND_W83627DHG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + # This erases 28 KB and writes 10 KB register dumps to SPI flash on every + # boot, wasting 3 s and causing wear! Therefore disable S3 for now. + #select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_4096 + select GFXUMA + +config MAINBOARD_DIR + string + default lippert/toucan_af + +config MAINBOARD_PART_NUMBER + string + default "Toucan-AF" + +config HW_MEM_HOLE_SIZEK + hex + default 0x200000 + +config MAX_CPUS + int + default 2 + +config HW_MEM_HOLE_SIZE_AUTO_INC + bool + default n + +config IRQ_SLOT_COUNT + int + default 11 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config RAMBASE + hex + default 0x200000 + +config ONBOARD_VGA_IS_PRIMARY + bool + default y + +config VGA_BIOS + bool + default n + +#config VGA_BIOS_FILE +# string "VGA BIOS path and filename" +# depends on VGA_BIOS +# default "rom/video/OntarioGenericVbios.bin" + +config VGA_BIOS_ID + string + default "1002,9802" + +config SB800_AHCI_ROM + bool + default n + +config DRIVERS_PS2_KEYBOARD + bool + default n + +endif # BOARD_LIPPERT_TOUCAN_AF diff --git a/src/mainboard/lippert/toucan_af/Makefile.inc b/src/mainboard/lippert/toucan_af/Makefile.inc new file mode 100644 index 0000000..0630008 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/Makefile.inc @@ -0,0 +1,35 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# + +ifeq ($(CONFIG_AHCI_BIOS),y) +stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID)) +cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom +pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE)) +pci$(stripped_ahcibios_id).rom-type := optionrom +endif + +romstage-y += buildOpts.c +romstage-y += agesawrapper.c +romstage-y += BiosCallOuts.c +romstage-y += PlatformGnbPcie.c + +ramstage-y += buildOpts.c +ramstage-y += agesawrapper.c +ramstage-y += BiosCallOuts.c +ramstage-y += PlatformGnbPcie.c diff --git a/src/mainboard/lippert/toucan_af/OptionsIds.h b/src/mainboard/lippert/toucan_af/OptionsIds.h new file mode 100644 index 0000000..cf0a4be --- /dev/null +++ b/src/mainboard/lippert/toucan_af/OptionsIds.h @@ -0,0 +1,64 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * IDS Option File + * + * This file is used to switch on/off IDS features. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 12067 $ @e $Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $ + */ +#ifndef _OPTION_IDS_H_ +#define _OPTION_IDS_H_ + +/** + * + * This file generates the defaults tables for the Integrated Debug Support + * Module. The documented build options are imported from a user controlled + * file for processing. The build options for the Integrated Debug Support + * Module are listed below: + * + * IDSOPT_IDS_ENABLED + * IDSOPT_ERROR_TRAP_ENABLED + * IDSOPT_CONTROL_ENABLED + * IDSOPT_TRACING_ENABLED + * IDSOPT_PERF_ANALYSIS + * IDSOPT_ASSERT_ENABLED + * IDS_DEBUG_PORT + * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED + * + **/ + +#define IDSOPT_IDS_ENABLED TRUE +//#define IDSOPT_TRACING_ENABLED TRUE +#define IDSOPT_ASSERT_ENABLED TRUE + +//#define IDSOPT_DEBUG_ENABLED FALSE +//#undef IDSOPT_HOST_SIMNOW +//#define IDSOPT_HOST_SIMNOW FALSE +//#undef IDSOPT_HOST_HDT +//#define IDSOPT_HOST_HDT FALSE +//#define IDS_DEBUG_PORT 0x80 + +#endif diff --git a/src/mainboard/lippert/toucan_af/PlatformGnbPcie.c b/src/mainboard/lippert/toucan_af/PlatformGnbPcie.c new file mode 100644 index 0000000..f8ba912 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/PlatformGnbPcie.c @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "heapManager.h" +#include "PlatformGnbPcieComplex.h" +#include "Filecode.h" + +#include <string.h> + +#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE + +/*---------------------------------------------------------------------------------------*/ +/** + * OemCustomizeInitEarly + * + * Description: + * This stub function will call the host environment through the binary block + * interface (call-out port) to provide a user hook opportunity + * + * Parameters: + * @param[in] **PeiServices + * @param[in] *InitEarly + * + * @retval VOID + * + **/ +/*---------------------------------------------------------------------------------------*/ +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ) +{ + AGESA_STATUS Status; + VOID *BrazosPcieComplexListPtr; + VOID *BrazosPciePortPtr; + VOID *BrazosPcieDdiPtr; + + ALLOCATE_HEAP_PARAMS AllocHeapParams; + +PCIe_PORT_DESCRIPTOR PortList [] = { + // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...) + { + 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...) + { + 0, + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0) + }, + // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3), + PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0) + } +}; + +PCIe_DDI_DESCRIPTOR DdiList [] = { + // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...) + { + 0, //Descriptor flags + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) + {ConnectorTypeAutoDetect, Aux1, Hdp1} + }, + // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...) + { + DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array + PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15), + //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2) + {ConnectorTypeAutoDetect, Aux2, Hdp2} + } +}; + +PCIe_COMPLEX_DESCRIPTOR Brazos = { + DESCRIPTOR_TERMINATE_LIST, + 0, + &PortList[0], + &DdiList[0] +}; + + // GNB PCIe topology Porting + + // + // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + // + AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList); + + AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader); + if ( Status!= AGESA_SUCCESS) { + // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR + ASSERT(FALSE); + return; + } + + BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(Brazos); + BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr; + + AllocHeapParams.BufferPtr += sizeof(PortList); + BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr; + + memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos)); + memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList)); + memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList)); + + + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr; + ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr; + + InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr; + InitEarly->GnbConfig.PsppPolicy = 0; +} diff --git a/src/mainboard/lippert/toucan_af/PlatformGnbPcieComplex.h b/src/mainboard/lippert/toucan_af/PlatformGnbPcieComplex.h new file mode 100644 index 0000000..69e2615 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/PlatformGnbPcieComplex.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H +#define _PLATFORM_GNB_PCIE_COMPLEX_H + +#include "Porting.h" +#include "AGESA.h" +#include "amdlib.h" +#include <cpu/amd/agesa/s3_resume.h> + +//GNB GPP Port4 +#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port5 +#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port6 +#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port7 +#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +//GNB GPP Port8 +#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable +#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2 +#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1 +#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db) + //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db) +#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced + +VOID +OemCustomizeInitEarly ( + IN OUT AMD_EARLY_PARAMS *InitEarly + ); + +#endif //_PLATFORM_GNB_PCIE_COMPLEX_H diff --git a/src/mainboard/lippert/toucan_af/acpi/routing.asl b/src/mainboard/lippert/toucan_af/acpi/routing.asl new file mode 100644 index 0000000..2a61ce3 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/acpi/routing.asl @@ -0,0 +1,407 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, INTC, 0 }, + Package(){0x0001FFFF, 1, INTD, 0 }, + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, INTD, 0 }, + Package(){0x0003FFFF, 1, INTA, 0 }, + Package(){0x0003FFFF, 2, INTB, 0 }, + Package(){0x0003FFFF, 3, INTC, 0 }, + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, INTB, 0 }, + Package(){0x0005FFFF, 1, INTC, 0 }, + Package(){0x0005FFFF, 2, INTD, 0 }, + Package(){0x0005FFFF, 3, INTA, 0 }, + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + + Package(){0x0009FFFF, 0, INTB, 0 }, + Package(){0x0009FFFF, 1, INTC, 0 }, + Package(){0x0009FFFF, 2, INTD, 0 }, + Package(){0x0009FFFF, 3, INTA, 0 }, + + Package(){0x000AFFFF, 0, INTC, 0 }, + Package(){0x000AFFFF, 1, INTD, 0 }, + Package(){0x000AFFFF, 2, INTA, 0 }, + Package(){0x000AFFFF, 3, INTB, 0 }, + + Package(){0x000BFFFF, 0, INTD, 0 }, + Package(){0x000BFFFF, 1, INTA, 0 }, + Package(){0x000BFFFF, 2, INTB, 0 }, + Package(){0x000BFFFF, 3, INTC, 0 }, + + Package(){0x000CFFFF, 0, INTA, 0 }, + Package(){0x000CFFFF, 1, INTB, 0 }, + Package(){0x000CFFFF, 2, INTC, 0 }, + Package(){0x000CFFFF, 3, INTD, 0 }, + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, INTD, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, INTC, 0 }, + Package(){0x0012FFFF, 1, INTB, 0 }, + + Package(){0x0013FFFF, 0, INTC, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + + Package(){0x0016FFFF, 0, INTC, 0 }, + Package(){0x0016FFFF, 1, INTB, 0 }, + + /* Package(){0x0014FFFF, 1, INTA, 0 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + + Package(){0x0015FFFF, 0, INTA, 0 }, + Package(){0x0015FFFF, 1, INTB, 0 }, + Package(){0x0015FFFF, 2, INTC, 0 }, + Package(){0x0015FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS780 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + Package(){0x0001FFFF, 0, 0, 18 }, + Package(){0x0001FFFF, 1, 0, 19 }, + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + Package(){0x0003FFFF, 1, 0, 16 }, + Package(){0x0003FFFF, 2, 0, 17 }, + Package(){0x0003FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + Package(){0x0004FFFF, 1, 0, 17 }, + Package(){0x0004FFFF, 2, 0, 18 }, + Package(){0x0004FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + Package(){0x0005FFFF, 1, 0, 18 }, + Package(){0x0005FFFF, 2, 0, 19 }, + Package(){0x0005FFFF, 3, 0, 16 }, + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + Package(){0x0006FFFF, 1, 0, 19 }, + Package(){0x0006FFFF, 2, 0, 16 }, + Package(){0x0006FFFF, 3, 0, 17 }, + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + Package(){0x0007FFFF, 1, 0, 16 }, + Package(){0x0007FFFF, 2, 0, 17 }, + Package(){0x0007FFFF, 3, 0, 18 }, + + /* Bus 0, Dev 9 - PCIe Bridge for network card */ + Package(){0x0009FFFF, 0, 0, 17 }, + Package(){0x0009FFFF, 1, 0, 16 }, + Package(){0x0009FFFF, 2, 0, 17 }, + Package(){0x0009FFFF, 3, 0, 18 }, + /* Bus 0, Dev A - PCIe Bridge for network card */ + Package(){0x000AFFFF, 0, 0, 18 }, + Package(){0x000AFFFF, 1, 0, 16 }, + Package(){0x000AFFFF, 2, 0, 17 }, + Package(){0x000AFFFF, 3, 0, 18 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0011FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; + * EHCI, dev 18, 19 func 2 */ + Package(){0x0012FFFF, 0, 0, 18 }, + Package(){0x0012FFFF, 1, 0, 17 }, + /* Package(){0x0012FFFF, 2, 0, 18 }, */ + + Package(){0x0013FFFF, 0, 0, 18 }, + Package(){0x0013FFFF, 1, 0, 17 }, + /* Package(){0x0013FFFF, 2, 0, 16 }, */ + + /* Package(){0x00140000, 0, 0, 16 }, */ + + Package(){0x0016FFFF, 0, 0, 18 }, + Package(){0x0016FFFF, 1, 0, 17 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + + /* TODO: pcie */ + Package(){0x0015FFFF, 0, 0, 16 }, + Package(){0x0015FFFF, 1, 0, 17 }, + Package(){0x0015FFFF, 2, 0, 18 }, + Package(){0x0015FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + Name(APR1, Package(){ + /* Internal graphics - RS780 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APS9, Package(){ + /* PCIe slot - Hooked to PCIe slot 9 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APSa, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE0, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + Name(APE0, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PE1, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + Name(APE1, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PE2, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + Name(APE2, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PE3, Package(){ + /* PCIe slot - Hooked to PCIe slot 10 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + Name(APE3, Package(){ + /* PCIe slot - Hooked to PCIe */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0003FFFF, 0, 0, 0x14 }, + Package(){0x0003FFFF, 1, 0, 0x15 }, + Package(){0x0003FFFF, 2, 0, 0x16 }, + Package(){0x0003FFFF, 3, 0, 0x17 }, + Package(){0x0004FFFF, 0, 0, 0x15 }, + Package(){0x0004FFFF, 1, 0, 0x16 }, + Package(){0x0004FFFF, 2, 0, 0x17 }, + Package(){0x0004FFFF, 3, 0, 0x14 }, + Package(){0x0005FFFF, 0, 0, 0x16 }, + Package(){0x0005FFFF, 1, 0, 0x17 }, + Package(){0x0005FFFF, 2, 0, 0x14 }, + Package(){0x0005FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/lippert/toucan_af/acpi/sata.asl b/src/mainboard/lippert/toucan_af/acpi/sata.asl new file mode 100644 index 0000000..dcf6dec --- /dev/null +++ b/src/mainboard/lippert/toucan_af/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00110000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/lippert/toucan_af/acpi/superio.asl b/src/mainboard/lippert/toucan_af/acpi/superio.asl new file mode 100644 index 0000000..9be7492 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/acpi/superio.asl @@ -0,0 +1,39 @@ +/* + * SuperI/O devices + * + * This file is part of the coreboot project. + * + * Copyright (C) 2012 LiPPERT ADLINK Technology GmbH + * (Written by Jens Rottmann JRottmann@LiPPERTembedded.de for LiPPERT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* PS/2 Keyboard */ +Device(KBC) { + Name(_HID, EISAID("PNP0303")) + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0060, 0x0060, 1, 1) + IO(Decode16, 0x0064, 0x0064, 1, 1) + IRQNoFlags(){1} + }) +} + +/* PS/2 Mouse */ +Device(PS2M) { + Name(_HID, EISAID("PNP0F13")) + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){12} + }) +} diff --git a/src/mainboard/lippert/toucan_af/acpi/usb.asl b/src/mainboard/lippert/toucan_af/acpi/usb.asl new file mode 100644 index 0000000..2822ffd --- /dev/null +++ b/src/mainboard/lippert/toucan_af/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/lippert/toucan_af/acpi_tables.c b/src/mainboard/lippert/toucan_af/acpi_tables.c new file mode 100644 index 0000000..588345e --- /dev/null +++ b/src/mainboard/lippert/toucan_af/acpi_tables.c @@ -0,0 +1,268 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include "agesawrapper.h" +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam14.h> + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + int lens; + msr_t msr; + char pscope[] = "\_SB.PCI0"; + + lens = acpigen_write_scope(pscope); + msr = rdmsr(TOP_MEM); + lens += acpigen_write_name_dword("TOM1", msr.lo); + msr = rdmsr(TOP_MEM2); + /* + * Since XP only implements parts of ACPI 2.0, we can't use a qword + * here. + * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt + * slide 22ff. + * Shift value right by 20 bit to make it fit into 32bit, + * giving us 1MB granularity and a limit of almost 4Exabyte of memory. + */ + lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); + acpigen_patch_len(lens - 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB800 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +unsigned long acpi_fill_hest(acpi_hest_t *hest) +{ + void *addr, *current; + + /* Skip the HEST header. */ + current = (void *)(hest + 1); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); + if (addr != NULL) + current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2); + + return (unsigned long)current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_srat_t *srat; + acpi_slit_t *slit; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + acpi_header_t *ssdt2; + acpi_header_t *alib; + acpi_hest_t *hest; + + /* Align ACPI tables to 16 bytes */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* DSDT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + + /* FACS */ // it needs 64 bit alignment + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* FADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* + * We explicitly add these tables later on: + */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET Timers Linux wants an MADT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + /* HEST */ + current = ALIGN(current, 8); + hest = (acpi_hest_t *)current; + acpi_write_hest((void *)current); + acpi_add_table(rsdp, (void *)current); + current += ((acpi_header_t *)current)->length; + + /* SRAT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); + srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT); + if (srat != NULL) { + memcpy((void *)current, srat, srat->header.length); + srat = (acpi_srat_t *) current; + current += srat->header.length; + acpi_add_table(rsdp, srat); + } + else { + printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); + } + + /* SLIT */ + current = ALIGN(current, 8); + printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); + slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT); + if (slit != NULL) { + memcpy((void *)current, slit, slit->header.length); + slit = (acpi_slit_t *) current; + current += slit->header.length; + acpi_add_table(rsdp, slit); + } + else { + printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); + } + + /* SSDT */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); + alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB); + if (alib != NULL) { + memcpy((void *)current, alib, alib->length); + alib = (acpi_header_t *) current; + current += alib->length; + acpi_add_table(rsdp, (void *)alib); + } else { + printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n"); + } + + /* The DSDT needs additional work for the AGESA SSDT Pstate table */ + /* Keep the comment for a while. */ + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * AGESA SSDT Pstate at %lx\n", current); + ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE); + if (ssdt != NULL) { + memcpy((void *)current, ssdt, ssdt->length); + ssdt = (acpi_header_t *) current; + current += ssdt->length; + acpi_add_table(rsdp,ssdt); + } else { + printk(BIOS_DEBUG, " AGESA SSDT Pstate table NULL. Skipping.\n"); + } + + current = ALIGN(current, 16); + printk(BIOS_DEBUG, "ACPI: * coreboot TOM SSDT2 at %lx\n", current); + ssdt2 = (acpi_header_t *) current; + acpi_create_ssdt_generator(ssdt2, ACPI_TABLE_CREATOR); + current += ssdt2->length; + acpi_add_table(rsdp,ssdt2); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/lippert/toucan_af/agesawrapper.c b/src/mainboard/lippert/toucan_af/agesawrapper.c new file mode 100644 index 0000000..fc0bee2 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/agesawrapper.c @@ -0,0 +1,625 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "agesawrapper.h" +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include "PlatformGnbPcieComplex.h" + +#define __SIMPLE_DEVICE__ + +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/x86/mtrr.h> +#include <stdint.h> +#include <string.h> + +#include <cpu/amd/agesa/s3_resume.h> +#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> + +#define FILECODE UNASSIGNED_FILE_FILECODE + +#define MMCONF_ENABLE 1 + +/* ACPI table pointers returned by AmdInitLate */ +VOID *DmiTable = NULL; +VOID *AcpiPstate = NULL; +VOID *AcpiSrat = NULL; +VOID *AcpiSlit = NULL; + +VOID *AcpiWheaMce = NULL; +VOID *AcpiWheaCmc = NULL; +VOID *AcpiAlib = NULL; + +/*------------------------------------------------------------------------------ + * T Y P E D E F S A N D S T R U C T U R E S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * E X P O R T E D F U N C T I O N S + *------------------------------------------------------------------------------ + */ + +/*------------------------------------------------------------------------------ + * L O C A L F U N C T I O N S + *------------------------------------------------------------------------------ + */ +AGESA_STATUS agesawrapper_amdinitcpuio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + /* Enable legacy video routing: D18F1xF4 VGA Enable */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciData = 1; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* The platform BIOS needs to ensure the memory ranges of SB800 legacy + * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are + * set to non-posted regions. + */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); + PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000 + PciData |= 1 << 7; // set NP (non-posted) bit + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); + PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000 + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Map the remaining PCI hole as posted MMIO */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciData = 0x00FECF00; // last address before non-posted range + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + MsrReg = (MsrReg >> 8) | 3; + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciData = (UINT32)MsrReg; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + /* Send all IO (0000-FFFF) to southbridge. */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciData = 0x0000F000; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciData = 0x00000003; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitmmio ( + VOID + ) +{ + AGESA_STATUS Status; + UINT64 MsrReg; + UINT32 PciData; + PCI_ADDR PciAddress; + AMD_CONFIG_PARAMS StdHeader; + + UINT8 BusRangeVal = 0; + UINT8 BusNum; + UINT8 Index; + + /* + Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base + Address MSR register. + */ + + for (Index = 0; Index < 8; Index++) { + BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index; + if (BusNum == 1) { + BusRangeVal = Index; + break; + } + } + + MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE); + LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + + /* + Set the NB_CFG MSR register. Enable CF8 extended configuration cycles. + */ + LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader); + MsrReg = MsrReg | 0x0000400000000000ull; + LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader); + + /* Set Ontario Link Data */ + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0); + PciData = 0x01308002; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4); + PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID; + LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + + Status = AGESA_SUCCESS; + return Status; +} + +AGESA_STATUS agesawrapper_amdinitreset ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESET_PARAMS AmdResetParams; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + memset(&AmdResetParams, 0, sizeof(AMD_RESET_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET; + AmdParamStruct.AllocationMethod = ByHost; + AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS); + AmdParamStruct.NewStructPtr = &AmdResetParams; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = NULL; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + AmdResetParams.HtConfig.Depth = 0; + + status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + return status; +} + +AGESA_STATUS agesawrapper_amdinitearly ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_EARLY_PARAMS *AmdEarlyParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr; + OemCustomizeInitEarly (AmdEarlyParamsPtr); + + status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitpost ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_POST; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + /* Initialize heap space */ + EmptyHeap(); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitenv ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + PCI_ADDR PciAddress; + UINT32 PciValue; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + /* Initialize Subordinate Bus Number and Secondary Bus Number + * In platform BIOS this address is allocated by PCI enumeration code + Modify D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + /* Write to D1F0x18 */ + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x00010100; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Legacy Bridge Mode + * Modify B1D5F0x18 + */ + PciAddress.Address.Bus = 1; + PciAddress.Address.Device = 5; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Legacy Bridge Mode + * Modify B1D5F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize GMM Base Address for Pcie Mode + * Modify B0D1F0x18 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x18; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize FB Base Address for Pcie Mode + * Modify B0D1F0x10 + */ + PciAddress.Address.Register = 0x10; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x80000000; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Base and Limit Address + * Modify B0D1F0x20 + */ + PciAddress.Address.Bus = 0; + PciAddress.Address.Device = 1; + PciAddress.Address.Function = 0; + PciAddress.Address.Register = 0x20; + + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x96009600; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + + /* Initialize MMIO Prefetchable Memory Limit and Base + * Modify B0D1F0x24 + */ + PciAddress.Address.Register = 0x24; + LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + PciValue |= 0x8FF18001; + LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +VOID * +agesawrapper_getlateinitptr ( + int pick + ) +{ + switch (pick) { + case PICK_DMI: + return DmiTable; + case PICK_PSTATE: + return AcpiPstate; + case PICK_SRAT: + return AcpiSrat; + case PICK_SLIT: + return AcpiSlit; + case PICK_WHEA_MCE: + return AcpiWheaMce; + case PICK_WHEA_CMC: + return AcpiWheaCmc; + case PICK_ALIB: + return AcpiAlib; + default: + return NULL; + } +} + +AGESA_STATUS agesawrapper_amdinitmid ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + + /* Enable MMIO on AMD CPU Address Map Controller */ + agesawrapper_amdinitcpuio (); + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_MID; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + + status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr); + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amdinitlate ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_LATE_PARAMS * AmdLateParamsPtr; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE; + AmdParamStruct.AllocationMethod = PostMemDram; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + + AmdCreateStruct (&AmdParamStruct); + AmdLateParamsPtr = (AMD_LATE_PARAMS *) AmdParamStruct.NewStructPtr; + + printk (BIOS_DEBUG, "agesawrapper_amdinitlate: AmdLateParamsPtr = %X\n", (u32)AmdLateParamsPtr); + + Status = AmdInitLate (AmdLateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + DmiTable = AmdLateParamsPtr->DmiTable; + AcpiPstate = AmdLateParamsPtr->AcpiPState; + AcpiSrat = AmdLateParamsPtr->AcpiSrat; + AcpiSlit = AmdLateParamsPtr->AcpiSlit; + AcpiWheaMce = AmdLateParamsPtr->AcpiWheaMce; + AcpiWheaCmc = AmdLateParamsPtr->AcpiWheaCmc; + AcpiAlib = AmdLateParamsPtr->AcpiAlib; + + printk(BIOS_DEBUG, "In %s, AGESA generated ACPI tables:\n" + " DmiTable:%p\n AcpiPstate: %p\n AcpiSrat:%p\n AcpiSlit:%p\n" + " Mce:%p\n Cmc:%p\n Alib:%p\n", + __func__, DmiTable, AcpiPstate, AcpiSrat, AcpiSlit, + AcpiWheaMce, AcpiWheaCmc, AcpiAlib); + + /* Don't release the structure until coreboot has copied the ACPI tables. + * AmdReleaseStruct (&AmdLateParams); + */ + + return Status; +} + +AGESA_STATUS agesawrapper_amdinitresume ( + VOID + ) +{ + AGESA_STATUS status; + AMD_INTERFACE_PARAMS AmdParamStruct; + AMD_RESUME_PARAMS *AmdResumeParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdParamStruct, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME; + AmdParamStruct.AllocationMethod = PreMemHeap; + AmdParamStruct.StdHeader.AltImageBasePtr = 0; + AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdParamStruct.StdHeader.Func = 0; + AmdParamStruct.StdHeader.ImageBasePtr = 0; + AmdCreateStruct (&AmdParamStruct); + + AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr; + + AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0; + AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeNonVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize, + (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage); + + status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr); + + if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(); + AmdReleaseStruct (&AmdParamStruct); + + return status; +} + +AGESA_STATUS agesawrapper_amds3laterestore ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + AMD_S3LATE_PARAMS AmdS3LateParams; + AMD_S3LATE_PARAMS *AmdS3LateParamsPtr; + S3_DATA_TYPE S3DataType; + + memset(&AmdS3LateParams, 0, sizeof(AMD_S3LATE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.AllocationMethod = ByHost; + AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE; + AmdInterfaceParams.NewStructPtr = &AmdS3LateParams; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdS3LateParamsPtr = &AmdS3LateParams; + AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS); + + AmdCreateStruct (&AmdInterfaceParams); + + AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0; + S3DataType = S3DataTypeVolatile; + + OemAgesaGetS3Info (S3DataType, + (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize, + (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage); + + Status = AmdS3LateRestore (AmdS3LateParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +#ifndef __PRE_RAM__ +AGESA_STATUS agesawrapper_amdS3Save ( + VOID + ) +{ + AGESA_STATUS Status; + AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr; + AMD_INTERFACE_PARAMS AmdInterfaceParams; + S3_DATA_TYPE S3DataType; + + memset(&AmdInterfaceParams, 0, sizeof(AMD_INTERFACE_PARAMS)); + + AmdInterfaceParams.StdHeader.ImageBasePtr = 0; + AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM; + AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + AmdInterfaceParams.AllocationMethod = PostMemDram; + AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE; + AmdInterfaceParams.StdHeader.AltImageBasePtr = 0; + AmdInterfaceParams.StdHeader.Func = 0; + AmdCreateStruct(&AmdInterfaceParams); + + AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr; + AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader; + + Status = AmdS3Save (AmdS3SaveParamsPtr); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + S3DataType = S3DataTypeNonVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.NvStorage); + + if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) { + S3DataType = S3DataTypeVolatile; + + Status = OemAgesaSaveS3Info ( + S3DataType, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize, + AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage + ); + } + + OemAgesaSaveMtrr(); + AmdReleaseStruct (&AmdInterfaceParams); + + return Status; +} +#endif /* #ifndef __PRE_RAM__ */ + +AGESA_STATUS agesawrapper_amdlaterunaptask ( + UINT32 Func, + UINT32 Data, + VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + AP_EXE_PARAMS ApExeParams; + + memset(&ApExeParams, 0, sizeof(AP_EXE_PARAMS)); + + ApExeParams.StdHeader.AltImageBasePtr = 0; + ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout; + ApExeParams.StdHeader.Func = 0; + ApExeParams.StdHeader.ImageBasePtr = 0; + ApExeParams.FunctionNumber = Func; + ApExeParams.RelatedDataBlock = ConfigPtr; + + Status = AmdLateRunApTask (&ApExeParams); + if (Status != AGESA_SUCCESS) { + agesawrapper_amdreadeventlog(); + ASSERT(Status == AGESA_SUCCESS); + } + + return Status; +} + +AGESA_STATUS agesawrapper_amdreadeventlog ( + VOID + ) +{ + AGESA_STATUS Status; + EVENT_PARAMS AmdEventParams; + + memset(&AmdEventParams, 0, sizeof(EVENT_PARAMS)); + + AmdEventParams.StdHeader.AltImageBasePtr = 0; + AmdEventParams.StdHeader.CalloutPtr = NULL; + AmdEventParams.StdHeader.Func = 0; + AmdEventParams.StdHeader.ImageBasePtr = 0; + Status = AmdReadEventLog (&AmdEventParams); + while (AmdEventParams.EventClass != 0) { + printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo); + printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2); + printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4); + Status = AmdReadEventLog (&AmdEventParams); + } + + return Status; +} diff --git a/src/mainboard/lippert/toucan_af/agesawrapper.h b/src/mainboard/lippert/toucan_af/agesawrapper.h new file mode 100644 index 0000000..a74a800 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/agesawrapper.h @@ -0,0 +1,59 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _AGESAWRAPPER_H_ +#define _AGESAWRAPPER_H_ + +#include <stdint.h> +#include "Porting.h" +#include "AGESA.h" + +/* Define AMD Ontario APPU SSID/SVID */ +#define AMD_APU_SVID 0x1022 +#define AMD_APU_SSID 0x1234 +#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS + +enum { + PICK_DMI, /* DMI Interface */ + PICK_PSTATE, /* Acpi Pstate SSDT Table */ + PICK_SRAT, /* SRAT Table */ + PICK_SLIT, /* SLIT Table */ + PICK_WHEA_MCE, /* WHEA MCE table */ + PICK_WHEA_CMC, /* WHEA CMV table */ + PICK_ALIB, /* SACPI SSDT table with ALIB implementation */ +}; + +AGESA_STATUS agesawrapper_amdinitreset(void); +AGESA_STATUS agesawrapper_amdinitearly(void); +AGESA_STATUS agesawrapper_amdinitenv(void); +AGESA_STATUS agesawrapper_amdinitlate(void); +AGESA_STATUS agesawrapper_amdinitpost(void); +AGESA_STATUS agesawrapper_amdinitmid(void); + +AGESA_STATUS agesawrapper_amdreadeventlog(void); + +AGESA_STATUS agesawrapper_amdinitcpuio(void); +AGESA_STATUS agesawrapper_amdinitmmio(void); +AGESA_STATUS agesawrapper_amdinitresume(void); +AGESA_STATUS agesawrapper_amdS3Save(void); +AGESA_STATUS agesawrapper_amds3laterestore(void); +AGESA_STATUS agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, VOID *ConfigPtr); +void *agesawrapper_getlateinitptr (int pick); + +#endif diff --git a/src/mainboard/lippert/toucan_af/board_info.txt b/src/mainboard/lippert/toucan_af/board_info.txt new file mode 100644 index 0000000..77acfae --- /dev/null +++ b/src/mainboard/lippert/toucan_af/board_info.txt @@ -0,0 +1,6 @@ +Category: half +Board URL: http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/lippert/toucan_af/buildOpts.c b/src/mainboard/lippert/toucan_af/buildOpts.c new file mode 100644 index 0000000..a6e4472 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/buildOpts.c @@ -0,0 +1,459 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * @file + * + * AMD User options selection for a Brazos platform solution system + * + * This file is placed in the user's platform directory and contains the + * build option selections desired for that platform. + * + * For Information about this file, see @ref platforminstall. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Core + * @e $Revision: 23714 $ @e $Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ + */ + +#include <stdlib.h> + +#include "Filecode.h" +#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE + + +/* Select the cpu family. */ +#define INSTALL_FAMILY_10_SUPPORT FALSE +#define INSTALL_FAMILY_12_SUPPORT FALSE +#define INSTALL_FAMILY_14_SUPPORT TRUE +#define INSTALL_FAMILY_15_SUPPORT FALSE + +/* Select the cpu socket type. */ +#define INSTALL_G34_SOCKET_SUPPORT FALSE +#define INSTALL_C32_SOCKET_SUPPORT FALSE +#define INSTALL_S1G3_SOCKET_SUPPORT FALSE +#define INSTALL_S1G4_SOCKET_SUPPORT FALSE +#define INSTALL_ASB2_SOCKET_SUPPORT FALSE +#define INSTALL_FS1_SOCKET_SUPPORT FALSE +#define INSTALL_FM1_SOCKET_SUPPORT FALSE +#define INSTALL_FP1_SOCKET_SUPPORT FALSE +#define INSTALL_FT1_SOCKET_SUPPORT TRUE +#define INSTALL_AM3_SOCKET_SUPPORT FALSE + +/* + * Agesa optional capabilities selection. + * Uncomment and mark FALSE those features you wish to include in the build. + * Comment out or mark TRUE those features you want to REMOVE from the build. + */ + +#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE +#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE +#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE + +#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE +#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE + +#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE +#define BLDOPT_REMOVE_ECC_SUPPORT FALSE +//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE +#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE +#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE +#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE +#define BLDOPT_REMOVE_DQS_TRAINING FALSE +#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE +#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE +#define BLDOPT_REMOVE_ACPI_PSTATES FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE + #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE + #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE +#define BLDOPT_REMOVE_SRAT FALSE +#define BLDOPT_REMOVE_SLIT FALSE +#define BLDOPT_REMOVE_WHEA FALSE +#define BLDOPT_REMOVE_DMI TRUE +#define BLDOPT_REMOVE_HT_ASSIST TRUE +#define BLDOPT_REMOVE_ATM_MODE TRUE +//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE +//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE +#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE +//#define BLDOPT_REMOVE_C6_STATE TRUE +#define BLDOPT_REMOVE_GFX_RECOVERY TRUE +#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE + +/* + * Agesa entry points used in this implementation. + */ +#define AGESA_ENTRY_INIT_RESET TRUE +#define AGESA_ENTRY_INIT_RECOVERY FALSE +#define AGESA_ENTRY_INIT_EARLY TRUE +#define AGESA_ENTRY_INIT_POST TRUE +#define AGESA_ENTRY_INIT_ENV TRUE +#define AGESA_ENTRY_INIT_MID TRUE +#define AGESA_ENTRY_INIT_LATE TRUE +#define AGESA_ENTRY_INIT_S3SAVE TRUE +#define AGESA_ENTRY_INIT_RESUME TRUE +#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE +#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE + +#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS +#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER + +#define BLDCFG_VRM_CURRENT_LIMIT 24000 +//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 +#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000 +#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 +#define BLDCFG_VRM_SLEW_RATE 5000 +//#define BLDCFG_VRM_NB_SLEW_RATE 5000 +//#define BLDCFG_VRM_ADDITIONAL_DELAY 0 +//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 +#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE +//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE +#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000 +//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 + +//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' +//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' +//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE +#define BLDCFG_PLAT_NUM_IO_APICS 3 +//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled +//#define BLDCFG_PLATFORM_C1E_OPDATA 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 +//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 +#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 +#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840 +#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840 +//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto +#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST +#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE +//#define BLDCFG_STARTING_BUSNUM 0 +//#define BLDCFG_MAXIMUM_BUSNUM 0xf8 +//#define BLDCFG_ALLOCATED_BUSNUMS 0x20 +//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0 +//#define BLDCFG_BUID_SWAP_LIST 0 +//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0 +//#define BLDCFG_HTFABRIC_LIMITS_LIST 0 +//#define BLDCFG_HTCHAIN_LIMITS_LIST 0 +//#define BLDCFG_BUS_NUMBERS_LIST 0 +//#define BLDCFG_IGNORE_LINK_LIST 0 +//#define BLDCFG_LINK_SKIP_REGANG_LIST 0 +//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0 +//#define BLDCFG_USE_HT_ASSIST TRUE +//#define BLDCFG_USE_ATM_MODE TRUE +//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm +#define BLDCFG_S3_LATE_RESTORE TRUE +//#define BLDCFG_USE_32_BYTE_REFRESH FALSE +//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE +//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance +//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE +//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE +//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0 +#define BLDCFG_CFG_GNB_HD_AUDIO FALSE +//#define BLDCFG_CFG_ABM_SUPPORT FALSE +//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0 +//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0 +//#define BLDCFG_MEM_INIT_PSTATE 0 +//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 +#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY +#define BLDCFG_MEMORY_MODE_UNGANGED TRUE +//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE +//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE +#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE +#define BLDCFG_MEMORY_POWER_DOWN TRUE +#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT +//#define BLDCFG_ONLINE_SPARE FALSE +//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE +#define BLDCFG_BANK_SWIZZLE TRUE +#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY +#define BLDCFG_DQS_TRAINING_CONTROL TRUE +#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE +#define BLDCFG_USE_BURST_MODE FALSE +#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE +//#define BLDCFG_ENABLE_ECC_FEATURE TRUE +//#define BLDCFG_ECC_REDIRECTION FALSE +//#define BLDCFG_SCRUB_DRAM_RATE 0 +//#define BLDCFG_SCRUB_L2_RATE 0 +//#define BLDCFG_SCRUB_L3_RATE 0 +//#define BLDCFG_SCRUB_IC_RATE 0 +//#define BLDCFG_SCRUB_DC_RATE 0 +//#define BLDCFG_ECC_SYNC_FLOOD 0 +//#define BLDCFG_ECC_SYMBOL_SIZE 0 +//#define BLDCFG_1GB_ALIGN FALSE +#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO +#define BLDCFG_UMA_ALLOCATION_SIZE 0 +#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE +#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED +#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 +#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 + +/* + * Agesa configuration values selection. + * Uncomment and specify the value for the configuration options + * needed by the system. + */ +#include "AGESA.h" +#include "CommonReturns.h" + +/* The fixed MTRR values to be set after memory initialization. */ +CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = +{ + { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull }, + { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull }, + { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull }, + { CPU_LIST_TERMINAL } +}; + +/* Include the files that instantiate the configuration definitions. */ + +#include "cpuRegisters.h" +#include "cpuFamRegisters.h" +#include "cpuFamilyTranslation.h" +#include "AdvancedApi.h" +#include "heapManager.h" +#include "CreateStruct.h" +#include "cpuFeatures.h" +#include "Table.h" +#include "cpuEarlyInit.h" +#include "cpuLateInit.h" +#include "GnbInterface.h" + +/***************************************************************************** + * Define the RELEASE VERSION string + * + * The Release Version string should identify the next planned release. + * When a branch is made in preparation for a release, the release manager + * should change/confirm that the branch version of this file contains the + * string matching the desired version for the release. The trunk version of + * the file should always contain a trailing 'X'. This will make sure that a + * development build from trunk will not be confused for a released version. + * The release manager will need to remove the trailing 'X' and update the + * version string as appropriate for the release. The trunk copy of this file + * should also be updated/incremented for the next expected version, + trailing 'X' + ****************************************************************************/ +// This is the delivery package title, "BrazosPI" +// This string MUST be exactly 8 characters long +#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} + +// This is the release version number of the AGESA component +// This string MUST be exactly 12 characters long +#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '} + +/* MEMORY_BUS_SPEED */ +#define DDR400_FREQUENCY 200 ///< DDR 400 +#define DDR533_FREQUENCY 266 ///< DDR 533 +#define DDR667_FREQUENCY 333 ///< DDR 667 +#define DDR800_FREQUENCY 400 ///< DDR 800 +#define DDR1066_FREQUENCY 533 ///< DDR 1066 +#define DDR1333_FREQUENCY 667 ///< DDR 1333 +#define DDR1600_FREQUENCY 800 ///< DDR 1600 +#define DDR1866_FREQUENCY 933 ///< DDR 1866 +#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency + +/* QUANDRANK_TYPE*/ +#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM +#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM + +/* USER_MEMORY_TIMING_MODE */ +#define TIMING_MODE_AUTO 0 ///< Use best rate possible +#define TIMING_MODE_LIMITED 1 ///< Set user top limit +#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed + +/* POWER_DOWN_MODE */ +#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode +#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode + +// The following definitions specify the default values for various parameters in which there are +// no clearly defined defaults to be used in the common file. The values below are based on product +// and BKDG content, please consult the AGESA Memory team for consultation. +#define DFLT_SCRUB_DRAM_RATE (0) +#define DFLT_SCRUB_L2_RATE (0) +#define DFLT_SCRUB_L3_RATE (0) +#define DFLT_SCRUB_IC_RATE (0) +#define DFLT_SCRUB_DC_RATE (0) +#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED +#define DFLT_VRM_SLEW_RATE (5000) + +// Instantiate all solution relevant data. +#include "PlatformInstall.h" + +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + // + // The following macros are supported (use comma to separate macros): + // + // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) + // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. + // AGESA will base on this value to disable unused MemClk to save power. + // Example: + // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: + // Bit AM3/S1g3 pin name + // 0 M[B,A]_CLK_H/L[0] + // 1 M[B,A]_CLK_H/L[1] + // 2 M[B,A]_CLK_H/L[2] + // 3 M[B,A]_CLK_H/L[3] + // 4 M[B,A]_CLK_H/L[4] + // 5 M[B,A]_CLK_H/L[5] + // 6 M[B,A]_CLK_H/L[6] + // 7 M[B,A]_CLK_H/L[7] + // And platform has the following routing: + // CS0 M[B,A]_CLK_H/L[4] + // CS1 M[B,A]_CLK_H/L[2] + // CS2 M[B,A]_CLK_H/L[3] + // CS3 M[B,A]_CLK_H/L[5] + // Then platform can specify the following macro: + // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) + // + // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) + // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. + // AGESA will base on this value to tristate unused CKE to save power. + // + // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) + // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. + // AGESA will base on this value to tristate unused ODT pins to save power. + // + // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) + // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. + // AGESA will base on this value to tristate unused Chip select to save power. + // + // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) + // Specifies the number of DIMM slots per channel. + // + // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) + // Specifies the number of Chip selects per channel. + // + // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) + // Specifies the number of channels per socket. + // + // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) + // Specifies DDR bus speed of channel ChannelID on socket SocketID. + // + // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) + // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) + // + // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, + // Byte6Seed, Byte7Seed, ByteEccSeed) + // Specifies the write leveling seed for a channel of a socket. + // + HW_RXEN_SEED (ANY_SOCKET, ANY_CHANNEL, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B, 0x3B), + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1), + PSO_END +}; + +/* + * These tables are optional and may be used to adjust memory timing settings + */ +#include "mm.h" +#include "mn.h" + +//DA Customer table +CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] = +{ + // Hardcoded Memory Training Values + + // The following macro should be used to override training values for your platform + // + // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), + // + // NOTE: + // The following training hardcode values are example values that were taken from a tilapia motherboard + // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in + // the table and replace the byte lane values with your own. + // + // ------------------ BYTE LANES ---------------------- + // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC + // Write Data Timing + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 + // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 + + // DQS Receiver Enable + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 + // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 + + // Write DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 + + // Read DQS Delays + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 + // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 + //-------------------------------------------------------------------------------------------------------------------------------------------------- + // TABLE END + NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table +}; +CONST UINT8 SizeOfTableON = ARRAY_SIZE(AGESA_MEM_TABLE_ON); + +/* *************************************************************************** + * Optional User code to be included into the AGESA build + * These may be 32-bit call-out routines... + */ +//AGESA_STATUS +//AgesaReadSpd ( +// IN UINTN FcnData, +// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd +// ) +//{ +// /* platform code to read an SPD... */ +// return Status; +//} diff --git a/src/mainboard/lippert/toucan_af/cmos.layout b/src/mainboard/lippert/toucan_af/cmos.layout new file mode 100644 index 0000000..ab65be0 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/cmos.layout @@ -0,0 +1,116 @@ +#***************************************************************************** +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#***************************************************************************** + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/lippert/toucan_af/devicetree.cb b/src/mainboard/lippert/toucan_af/devicetree.cb new file mode 100644 index 0000000..afd6b25 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/devicetree.cb @@ -0,0 +1,116 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + #device pci 1.1 on end # Internal HDMI Audio + device pci 4.0 on end # PCIE P2P bridge + device pci 5.0 on end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge + device pci 7.0 on end # PCIE P2P bridge on-board NIC + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 off end + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/winbond/w83627dhg + device pnp 4e.0 off end # Floppy + device pnp 4e.1 off end # Parallel Port + device pnp 4e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # Keyboard, Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + #device pnp 4e.6 off end # SPI + device pnp 4e.307 off end # GPIO6 + device pnp 4e.8 off end # WDTO, PLED + device pnp 4e.009 off end # GPIO2 + device pnp 4e.109 off end # GPIO3 + device pnp 4e.209 off end # GPIO4 + device pnp 4e.309 off end # GPIO5 + device pnp 4e.A off end # ACPI + device pnp 4e.B off end # HW Monitor + end # w83627dhg + end #LPC + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 off end # OHCI FS/LS USB + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA + device pci 15.1 on end # PCIe PortB + device pci 15.2 on end # PCIe PortC + device pci 15.3 on end # PCIe PortD + device pci 16.0 off end # OHCI USB 10-13 + device pci 16.2 off end # EHCI USB 10-13 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + + register "spdAddrLookup" = " + { + { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses + { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses + }" + + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex diff --git a/src/mainboard/lippert/toucan_af/dsdt.asl b/src/mainboard/lippert/toucan_af/dsdt.asl new file mode 100644 index 0000000..3e0fe36 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/dsdt.asl @@ -0,0 +1,1834 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "AMD ", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/i386/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* + * Processor Object + * + */ + Scope (_PR) { /* define processor scope */ + Processor( + C000, /* name space name, align with BLDCFG_PROCESSOR_SCOPE_NAME[01] */ + 0, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + + Processor( + C001, /* name space name */ + 1, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + Processor( + C002, /* name space name */ + 2, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + Processor( + C003, /* name space name */ + 3, /* Unique number for this processor */ + 0x810, /* PBLK system I/O address !hardcoded! */ + 0x06 /* PBLKLEN for boot processor */ + ) { + } + } /* End _PR scope */ + + /* PIC IRQ mapping registers, C00h-C01h. */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PIRA, 0x00000008, /* Index 0 */ + PIRB, 0x00000008, /* Index 1 */ + PIRC, 0x00000008, /* Index 2 */ + PIRD, 0x00000008, /* Index 3 */ + PIRE, 0x00000008, /* Index 4 */ + PIRF, 0x00000008, /* Index 5 */ + PIRG, 0x00000008, /* Index 6 */ + PIRH, 0x00000008, /* Index 7 */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers, TODO:PMIO is quite different in SB800. */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk. TODO: should be 0x60 */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve){ + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + Method(CIRQ, 0x00, NotSerialized){ + Store(0, PIRA) + Store(0, PIRB) + Store(0, PIRC) + Store(0, PIRD) + Store(0, PIRE) + Store(0, PIRF) + Store(0, PIRG) + Store(0, PIRH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PIRA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PIRA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PIRB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PIRB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PIRC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PIRC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIRD) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIRD) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRD, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRD) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PIRE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PIRE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PIRF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PIRF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PIRG) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PIRG) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRG, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRG) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PIRH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PIRH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIRH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIRH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + /* Notify (_TZ.TZ00, 0x80) */ + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */ + Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */ + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + + /* Operating System Capabilities Method */ + Method(_OSC,4) + { /* Check for proper PCI/PCIe UUID */ + If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) + { + /* Let OS control everything */ + Return (Arg3) + } + } + + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* GPP */ + Device(PBR9) { + Name(_ADR, 0x00090000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS9) } /* APIC mode */ + Return (PS9) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR9 */ + + Device(PBRa) { + Name(_ADR, 0x000A0000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APSa) } /* APIC mode */ + Return (PSa) /* PIC Mode */ + } /* end _PRT */ + } /* end PBRa */ + + Device(PE20) { + Name(_ADR, 0x00150000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE0) } /* APIC mode */ + Return (PE0) /* PIC Mode */ + } /* end _PRT */ + } /* end PE20 */ + Device(PE21) { + Name(_ADR, 0x00150001) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE1) } /* APIC mode */ + Return (PE1) /* PIC Mode */ + } /* end _PRT */ + } /* end PE21 */ + Device(PE22) { + Name(_ADR, 0x00150002) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE2) } /* APIC mode */ + Return (APE2) /* PIC Mode */ + } /* end _PRT */ + } /* end PE22 */ + Device(PE23) { + Name(_ADR, 0x00150003) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APE3) } /* APIC mode */ + Return (PE3) /* PIC Mode */ + } /* end _PRT */ + } /* end PE23 */ + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00110000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00120000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00120002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00160000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UOH6) { + Name(_ADR, 0x00160002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00140005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#if 0 + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ +#endif + #include "acpi/superio.asl" + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device + * The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x00FF, /* range maximum */ + 0x0000, /* translation */ + 0x0100, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + + IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ +#if 0 + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) +#endif + /* memory space for PCI BARs below 4GB */ + Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ +#if 0 + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } +#endif + CreateDWordField(CRES, ^MMIO._BAS, MM1B) + CreateDWordField(CRES, ^MMIO._LEN, MM1L) + /* + * Declare memory between TOM1 and 4GB as available + * for PCI MMIO. + * Use ShiftLeft to avoid 64bit constant (for XP). + * This will work even if the OS does 32bit arithmetic, as + * 32bit (0x00000000 - TOM1) will wrap and give the same + * result as 64bit (0x100000000 - TOM1). + */ + Store(TOM1, MM1B) + ShiftLeft(0x10000000, 4, Local0) + Subtract(Local0, TOM1, Local0) + Store(Local0, MM1L) + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ +#if 0 + /* SMBUS Support */ + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +#endif +} +/* End of ASL file */ diff --git a/src/mainboard/lippert/toucan_af/irq_tables.c b/src/mainboard/lippert/toucan_af/irq_tables.c new file mode 100644 index 0000000..12a64a8 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/irq_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdfam14.h> + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + + /* pci bridge */ + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + + + + slot_num++; + + + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; + +} diff --git a/src/mainboard/lippert/toucan_af/mainboard.c b/src/mainboard/lippert/toucan_af/mainboard.c new file mode 100644 index 0000000..9e44a21 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/mainboard.c @@ -0,0 +1,159 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdlib.h> +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb800/sb800.h> +#include <arch/acpi.h> +#include <northbridge/amd/agesa/BiosCallOuts.h> +#include <cpu/amd/agesa/s3_resume.h> +#include <cpu/amd/mtrr.h> +#include "SBPLATFORM.h" +#include "OEM.h" /* SMBUS0_BASE_ADDRESS */ +#include <southbridge/amd/cimx/sb800/gpio_oem.h> + +/* Write data block to slave on SMBUS0. */ +#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0) +#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2) +#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3) +#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4) +#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5) +#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7) +static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data) +{ + __outbyte(SMB0_STATUS, 0x1E); // clear error status + __outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out + __outbyte(SMB0_HOSTCMD, command); // or destination offset + __outbyte(SMB0_DATA0, length); // sent before data + __inbyte(SMB0_CONTROL); // reset block data array + while (length--) + __outbyte(SMB0_BLOCKDATA, *(data++)); + __outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ + + while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors + return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors +} + +static void init(struct device *dev) +{ + volatile u8 *spi_base; // base addr of Hudson's SPI host controller + int i; + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__); + + /* Init Hudson GPIOs. */ + printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE); + FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices + FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed + FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# + FCH_GPIO (197) = 0x28; // = input, disable int. pull-up + FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0 + FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups + FCH_IOMUX( 57) = 1; + FCH_GPIO ( 57) = 0x28; + FCH_IOMUX( 58) = 1; + FCH_GPIO ( 58) = 0x28; + FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector + FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0 + FCH_IOMUX(188) = 2; + FCH_GPIO (188) = 0x08; + FCH_IOMUX(166) = 2; + FCH_GPIO (166) = 0x08; + // needed to make GPO160 work (Hudson Register Reference section 2.3.6.1) + FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01; + FCH_IOMUX(160) = 1; + FCH_GPIO (160) = 0x08; + FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector + FCH_IOMUX(190) = 1; // default to inputs with int. PU + FCH_IOMUX(191) = 1; + FCH_IOMUX(192) = 1; + if (!fch_gpio_state(197)) // just in case anyone cares + printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n"); + printk(BIOS_INFO, "Board revision ID: %u\n", + fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56)); + + /* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */ + spi_base = (u8*)(pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0); + spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register + + /* Notify the SMC we're alive and kicking, or after a while it will + * effect a power cycle and switch to the alternate BIOS chip. + * Should be done as late as possible. */ + printk(BIOS_INFO, "Sending BIOS alive message\n"); + const u8 i_am_alive[] = { 0x03 }; //bit2=SEL_DP0: 0=DDI2, 1=LVDS + if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive))) + printk(BIOS_ERR, "smb_write_blk failed: %d\n", i); + + printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__); +} + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/** + * TODO + * SB CIMx callback + */ +void set_pcie_reset(void) +{ +} + +/** + * TODO + * mainboard specific SB CIMx callback + */ +void set_pcie_dereset(void) +{ +} + + +/********************************************** + * Enable the dedicated functions of the board. + **********************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); + dev->ops->init = init; + + /* enable GPP CLK0 thru CLK1 */ + /* disable GPP CLK2 thru SLT_GFX_CLK */ + u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); + *(misc_mem_clk_cntrl + 0) = 0xFF; + *(misc_mem_clk_cntrl + 1) = 0x00; + *(misc_mem_clk_cntrl + 2) = 0x00; + *(misc_mem_clk_cntrl + 3) = 0x00; + *(misc_mem_clk_cntrl + 4) = 0x00; + + /* + * Initialize ASF registers to an arbitrary address because someone + * long ago set things up this way inside the SPD read code. The + * SPD read code has been made generic and moved out of the board + * directory, so the ASF init is being done here. + */ + pm_iowrite(0x29, 0x80); + pm_iowrite(0x28, 0x61); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/lippert/toucan_af/mptable.c b/src/mainboard/lippert/toucan_af/mptable.c new file mode 100644 index 0000000..078601e --- /dev/null +++ b/src/mainboard/lippert/toucan_af/mptable.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam14.h> +#include <SBPLATFORM.h> + +u8 intr_data[] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x10,0x11,0x12,0x13 +}; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + /* + * By the time this function gets called, the IOAPIC registers + * have been written so they can be read to get the correct + * APIC ID and Version + */ + u8 ioapic_id = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); + u8 ioapic_ver = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + memcpy(mc->mpc_oem, "AMD ", 8); + + smp_write_processors(mc); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, ioapic_id, ioapic_ver, IO_APIC_ADDR); + + u8 byte; + + for (byte = 0x0; byte < sizeof(intr_data); byte ++) { + outb(byte | 0x80, 0xC00); + outb(intr_data[byte], 0xC01); + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin)) + + /* APU Internal Graphic Device*/ + PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]); + PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]); + + //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + /* Southbridge HD Audio: */ + PCI_INT(0x0, 0x14, 0x2, 0x12); + + PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */ + PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]); + PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]); + PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]); + PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]); + PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]); + + /* sata */ + PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]); + + /* on board NIC & Slot PCIE. */ + + /* PCI slots */ + device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); + if (dev && dev->enabled) { + u8 bus_pci = dev->link_list->secondary; + /* PCI_SLOT 0. */ + PCI_INT(bus_pci, 0x5, 0x0, 0x14); + PCI_INT(bus_pci, 0x5, 0x1, 0x15); + PCI_INT(bus_pci, 0x5, 0x2, 0x16); + PCI_INT(bus_pci, 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_pci, 0x6, 0x0, 0x15); + PCI_INT(bus_pci, 0x6, 0x1, 0x16); + PCI_INT(bus_pci, 0x6, 0x2, 0x17); + PCI_INT(bus_pci, 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_pci, 0x7, 0x0, 0x16); + PCI_INT(bus_pci, 0x7, 0x1, 0x17); + PCI_INT(bus_pci, 0x7, 0x2, 0x14); + PCI_INT(bus_pci, 0x7, 0x3, 0x15); + } + + /* PCIe PortA */ + PCI_INT(0x0, 0x15, 0x0, 0x10); + /* PCIe PortB */ + PCI_INT(0x0, 0x15, 0x1, 0x11); + /* PCIe PortC */ + PCI_INT(0x0, 0x15, 0x2, 0x12); + /* PCIe PortD */ + PCI_INT(0x0, 0x15, 0x3, 0x13); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/lippert/toucan_af/platform_cfg.h b/src/mainboard/lippert/toucan_af/platform_cfg.h new file mode 100644 index 0000000..25b0485 --- /dev/null +++ b/src/mainboard/lippert/toucan_af/platform_cfg.h @@ -0,0 +1,259 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef _PLATFORM_CFG_H_ +#define _PLATFORM_CFG_H_ + +/** + * @def BIOS_SIZE -> BIOS_SIZE_{1,2,4,8,16}M + * + * In SB800, default ROM size is 1M Bytes, if your platform ROM + * bigger than 1M you have to set the ROM size outside CIMx module and + * before AGESA module get call. + */ +#ifndef BIOS_SIZE +#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) +#endif /* BIOS_SIZE */ + +/** + * @def SPREAD_SPECTRUM + * @brief + * 0 - Disable Spread Spectrum function + * 1 - Enable Spread Spectrum function + */ +#define SPREAD_SPECTRUM 0 + +/** + * @def SB_HPET_TIMER + * @brief + * 0 - Disable hpet + * 1 - Enable hpet + */ +#define HPET_TIMER 1 + +/** + * @def USB_CONFIG + * @brief bit[0-6] used to control USB + * 0 - Disable + * 1 - Enable + * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 + * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 + * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 + * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 + * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 + * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 + * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 + */ +#define USB_CONFIG 0x0F + +/** + * @def PCI_CLOCK_CTRL + * @brief bit[0-4] used for PCI Slots Clock Control, + * 0 - disable + * 1 - enable + * PCI SLOT 0 define at BIT0 + * PCI SLOT 1 define at BIT1 + * PCI SLOT 2 define at BIT2 + * PCI SLOT 3 define at BIT3 + * PCI SLOT 4 define at BIT4 + */ +#define PCI_CLOCK_CTRL 0x1E + +/** + * @def SATA_CONTROLLER + * @brief INCHIP Sata Controller + */ +#define SATA_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def SATA_MODE + * @brief INCHIP Sata Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_MODE CONFIG_SB800_SATA_MODE + +/** + * @brief INCHIP Sata IDE Controller Mode + */ +#define IDE_LEGACY_MODE 0 +#define IDE_NATIVE_MODE 1 + +/** + * @def SATA_IDE_MODE + * @brief INCHIP Sata IDE Controller Mode + * NOTE: DO NOT ALLOW SATA & IDE use same mode + */ +#define SATA_IDE_MODE IDE_LEGACY_MODE + +/** + * @def EXTERNAL_CLOCK + * @brief 00/10: Reference clock from crystal oscillator via + * PAD_XTALI and PAD_XTALO + * + * @def INTERNAL_CLOCK + * @brief 01/11: Reference clock from internal clock through + * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL + */ +#define EXTERNAL_CLOCK 0x00 +#define INTERNAL_CLOCK 0x01 + +/* NOTE: inagua have to using internal clock, + * otherwise can not detect sata drive + */ +#define SATA_CLOCK_SOURCE INTERNAL_CLOCK + +/** + * @def SATA_PORT_MULT_CAP_RESERVED + * @brief 1 ON, 0 0FF + */ +#define SATA_PORT_MULT_CAP_RESERVED 1 + + +/** + * @def AZALIA_AUTO + * @brief Detect Azalia controller automatically. + * + * @def AZALIA_DISABLE + * @brief Disable Azalia controller. + + * @def AZALIA_ENABLE + * @brief Enable Azalia controller. + */ +#define AZALIA_AUTO 0 +#define AZALIA_DISABLE 1 +#define AZALIA_ENABLE 2 + +/** + * @brief INCHIP HDA controller + */ +#define AZALIA_CONTROLLER AZALIA_AUTO + +/** + * @def AZALIA_PIN_CONFIG + * @brief + * 0 - disable + * 1 - enable + */ +#define AZALIA_PIN_CONFIG 1 + +/** + * @def AZALIA_SDIN_PIN + * @brief + * SDIN0 is define at BIT0 & BIT1 + * 00 - GPIO PIN + * 01 - Reserved + * 10 - As a Azalia SDIN pin + * SDIN1 is define at BIT2 & BIT3 + * SDIN2 is define at BIT4 & BIT5 + * SDIN3 is define at BIT6 & BIT7 + */ +#define AZALIA_SDIN_PIN 0x2A + +/** + * @def GPP_CONTROLLER + */ +#define GPP_CONTROLLER CIMX_OPTION_ENABLED + +/** + * @def GPP_CFGMODE + * @brief GPP Link Configuration + * four possible configuration: + * GPP_CFGMODE_X4000 + * GPP_CFGMODE_X2200 + * GPP_CFGMODE_X2110 + * GPP_CFGMODE_X1111 + */ +#define GPP_CFGMODE GPP_CFGMODE_X1111 + +/** + * @def NB_SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define NB_SB_GEN2 TRUE + +/** + * @def SB_GEN2 + * 0 - Disable + * 1 - Enable + */ +#define SB_GPP_GEN2 TRUE + +/** + * @def SB_GPP_UNHIDE_PORTS + * TRUE - ports visible always, even port empty + * FALSE - ports invisible if port empty + */ +#define SB_GPP_UNHIDE_PORTS FALSE + +/** + * @def GEC_CONFIG + * 0 - Enable + * 1 - Disable + */ +#define GEC_CONFIG 1 + +static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */ +{ + /* NID, PinConfig (Verbs 71F..C) */ + {0x11, 0x411111F0}, /* NPC */ + {0x12, 0x411111F0}, /* DMIC */ + {0x14, 0x01214110}, /* FRONT (Port-D) */ + {0x15, 0x01011112}, /* SURR (Port-A) */ + {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ + {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ + {0x18, 0x01A19930}, /* MIC1 (Port-B) */ + {0x19, 0x411111F0}, /* MIC2 (Port-F) */ + {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ + {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ + {0x1C, 0x411111F0}, /* CD-IN */ + {0x1D, 0x40132601}, /* BEEP-IN */ + {0x1E, 0x01441120}, /* S/PDIF-OUT */ + {0x1F, 0x01C46140}, /* S/PDIF-IN */ + {0xff, 0xffffffff} /* end of table */ +}; + +static const CODECTBLLIST codec_tablelist[] = +{ + {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]}, + {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} +}; + +/** + * @def AZALIA_OEM_VERB_TABLE + * Mainboard specific codec verb table list + */ +#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) + +/* set up an ACPI preferred power management profile */ +/* from acpi.h + * PM_UNSPECIFIED = 0, + * PM_DESKTOP = 1, + * PM_MOBILE = 2, + * PM_WORKSTATION = 3, + * PM_ENTERPRISE_SERVER = 4, + * PM_SOHO_SERVER = 5, + * PM_APPLIANCE_PC = 6, + * PM_PERFORMANCE_SERVER = 7, + * PM_TABLET = 8 + */ +#define FADT_PM_PROFILE 1 + +#endif diff --git a/src/mainboard/lippert/toucan_af/romstage.c b/src/mainboard/lippert/toucan_af/romstage.c new file mode 100644 index 0000000..f9b9adf --- /dev/null +++ b/src/mainboard/lippert/toucan_af/romstage.c @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/stages.h> +#include <device/pnp_def.h> +#include <arch/cpu.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <console/loglevel.h> +#include <cpu/x86/mtrr.h> +#include "cpu/amd/car.h" +#include "agesawrapper.h" +#include <northbridge/amd/agesa/agesawrapper_call.h> +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627dhg/w83627dhg.h> +#include "cpu/x86/lapic.h" +#include <cpu/x86/cache.h> +#include <sb_cimx.h> +#include "SBPLATFORM.h" +#include "cbmem.h" +#include "cpu/amd/mtrr.h" +#include "cpu/amd/agesa/s3_resume.h" + + +#define SERIAL_DEV PNP_DEV(0x4e, W83627DHG_SP1) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + u32 val; + + /* + * All cores: allow caching of flash chip code and data + * (there are no cache-as-ram reliability concerns with family 14h) + */ + __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5); + __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800); + + /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */ + __writemsr (0xc0010062, 0); + + if (!cpu_init_detectedx && boot_cpu()) { + post_code(0x30); + sb_Poweron_Init(); + + post_code(0x31); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + } + + /* Halt if there was a built in self test failure */ + post_code(0x34); + report_bist_failure(bist); + + /* Load MPB */ + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + post_code(0x35); + AGESAWRAPPER(amdinitmmio); + + post_code(0x37); + AGESAWRAPPER(amdinitreset); + + post_code(0x39); + AGESAWRAPPER(amdinitearly); + + int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); + if (!s3resume) { + post_code(0x40); + /* Reboots with outb(3,0x92), outb(4,0xcf9) or triple-fault all + * hang, looks like DRAM re-init goes wrong, don't know why. */ + val = AGESAWRAPPER(amdinitpost); + if (val == 7) /* fatal, amdinitenv below is going to hang */ + outb(0x06, 0x0cf9); /* reset system harder instead */ + + post_code(0x42); + AGESAWRAPPER(amdinitenv); + + } else { /* S3 detect */ + printk(BIOS_INFO, "S3 detected\n"); + + post_code(0x60); + AGESAWRAPPER(amdinitresume); + + AGESAWRAPPER(amds3laterestore); + + post_code(0x61); + prepare_for_resume(); + } + + post_code(0x50); + copy_and_run(); + printk(BIOS_ERR, "Error: copy_and_run() returned!\n"); + + post_code(0x54); /* Should never see this post code. */ +} diff --git a/src/mainboard/msi/Kconfig b/src/mainboard/msi/Kconfig index 8052c4f..b7bf991 100644 --- a/src/mainboard/msi/Kconfig +++ b/src/mainboard/msi/Kconfig @@ -29,28 +29,28 @@ config BOARD_MSI_MS_6156 bool "MS-6156" config BOARD_MSI_MS_6178 bool "MS-6178" -config BOARD_MSI_MS7135 +config BOARD_MSI_MS_7135 bool "MS-7135 (K8N Neo3)" -config BOARD_MSI_MS7260 +config BOARD_MSI_MS_7260 bool "MS-7260 (K9N Neo)" -config BOARD_MSI_MS9185 +config BOARD_MSI_MS_9185 bool "MS-9185 (K9SD Master-S2R)" -config BOARD_MSI_MS9282 +config BOARD_MSI_MS_9282 bool "MS-9282 (K9SD Master)" -config BOARD_MSI_MS9652_FAM10 +config BOARD_MSI_MS_9652 bool "MS-9652 Fam10 (Speedster K9ND)"
endchoice
-source "src/mainboard/msi/ms6119/Kconfig" -source "src/mainboard/msi/ms6147/Kconfig" -source "src/mainboard/msi/ms6156/Kconfig" -source "src/mainboard/msi/ms6178/Kconfig" -source "src/mainboard/msi/ms7135/Kconfig" -source "src/mainboard/msi/ms7260/Kconfig" -source "src/mainboard/msi/ms9185/Kconfig" -source "src/mainboard/msi/ms9282/Kconfig" -source "src/mainboard/msi/ms9652_fam10/Kconfig" +source "src/mainboard/msi/ms_6119/Kconfig" +source "src/mainboard/msi/ms_6147/Kconfig" +source "src/mainboard/msi/ms_6156/Kconfig" +source "src/mainboard/msi/ms_6178/Kconfig" +source "src/mainboard/msi/ms_7135/Kconfig" +source "src/mainboard/msi/ms_7260/Kconfig" +source "src/mainboard/msi/ms_9185/Kconfig" +source "src/mainboard/msi/ms_9282/Kconfig" +source "src/mainboard/msi/ms_9652/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/msi/ms6119/Kconfig b/src/mainboard/msi/ms6119/Kconfig deleted file mode 100644 index 00ed0d9..0000000 --- a/src/mainboard/msi/ms6119/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_MSI_MS_6119 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default msi/ms6119 - -config MAINBOARD_PART_NUMBER - string - default "MS-6119" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_MSI_MS_6119 diff --git a/src/mainboard/msi/ms6119/board_info.txt b/src/mainboard/msi/ms6119/board_info.txt deleted file mode 100644 index 2a029e4..0000000 --- a/src/mainboard/msi/ms6119/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: desktop -Board URL: http://no.msi.com/product/mb/MS-6119.html -ROM package: DIP32 -ROM protocol: Parallel diff --git a/src/mainboard/msi/ms6119/devicetree.cb b/src/mainboard/msi/ms6119/devicetree.cb deleted file mode 100644 index 159a444..0000000 --- a/src/mainboard/msi/ms6119/devicetree.cb +++ /dev/null @@ -1,60 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 on # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/msi/ms6119/irq_tables.c b/src/mainboard/msi/ms6119/irq_tables.c deleted file mode 100644 index 89c32e7..0000000 --- a/src/mainboard/msi/ms6119/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x9c, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x14<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/msi/ms6119/romstage.c b/src/mainboard/msi/ms6119/romstage.c deleted file mode 100644 index be273f3..0000000 --- a/src/mainboard/msi/ms6119/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/msi/ms6147/Kconfig b/src/mainboard/msi/ms6147/Kconfig deleted file mode 100644 index fa4af80..0000000 --- a/src/mainboard/msi/ms6147/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_MSI_MS_6147 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default msi/ms6147 - -config MAINBOARD_PART_NUMBER - string - default "MS-6147" - -config IRQ_SLOT_COUNT - int - default 8 - -endif # BOARD_MSI_MS_6147 diff --git a/src/mainboard/msi/ms6147/board_info.txt b/src/mainboard/msi/ms6147/board_info.txt deleted file mode 100644 index 62d41dd..0000000 --- a/src/mainboard/msi/ms6147/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -Board URL: http://no.msi.com/product/mb/MS-6147.html -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y diff --git a/src/mainboard/msi/ms6147/devicetree.cb b/src/mainboard/msi/ms6147/devicetree.cb deleted file mode 100644 index 55f2745..0000000 --- a/src/mainboard/msi/ms6147/devicetree.cb +++ /dev/null @@ -1,60 +0,0 @@ -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 on # GPIO 1 - end - device pnp 3f0.8 on # GPIO 2 - end - device pnp 3f0.9 off # GPIO 3 - end - device pnp 3f0.a on # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/msi/ms6147/irq_tables.c b/src/mainboard/msi/ms6147/irq_tables.c deleted file mode 100644 index c8978d1..0000000 --- a/src/mainboard/msi/ms6147/irq_tables.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Mats Erik Andersson mats.andersson@gisladisker.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router device */ - 0x1c00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x20, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x14<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x00<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, /* North bridge */ - {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, /* IDE */ - {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, /* UHCI */ - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, /* AGP bridge */ - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/msi/ms6147/romstage.c b/src/mainboard/msi/ms6147/romstage.c deleted file mode 100644 index c3a7557..0000000 --- a/src/mainboard/msi/ms6147/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Mats Erik Andersson mats.andersson@gisladisker.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include <cpu/x86/bist.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/msi/ms6156/Kconfig b/src/mainboard/msi/ms6156/Kconfig deleted file mode 100644 index 840751c..0000000 --- a/src/mainboard/msi/ms6156/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_MSI_MS_6156 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_WINBOND_W83977TF - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default msi/ms6156 - -config MAINBOARD_PART_NUMBER - string - default "MS-6156" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_MSI_MS_6156 diff --git a/src/mainboard/msi/ms6156/board_info.txt b/src/mainboard/msi/ms6156/board_info.txt deleted file mode 100644 index beec822..0000000 --- a/src/mainboard/msi/ms6156/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: desktop -Board URL: http://no.msi.com/product/mb/MS-6156VA.html -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/msi/ms6156/devicetree.cb b/src/mainboard/msi/ms6156/devicetree.cb deleted file mode 100644 index d1fd3f8..0000000 --- a/src/mainboard/msi/ms6156/devicetree.cb +++ /dev/null @@ -1,81 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/winbond/w83977tf # Super I/O - device pnp 3f0.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 3f0.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 3f0.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 3f0.3 on # COM2 / IR - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 3f0.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 3f0.7 off # GPIO 1 - end - device pnp 3f0.8 off # GPIO 2 - end - device pnp 3f0.9 off # GPIO 3 - end - device pnp 3f0.a off # ACPI - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - device pci 14.0 on end # Onboard audio (Ensoniq ES1371) - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "1" - register "ide0_drive1_udma33_enable" = "1" - register "ide1_drive0_udma33_enable" = "1" - register "ide1_drive1_udma33_enable" = "1" - end - end -end diff --git a/src/mainboard/msi/ms6156/irq_tables.c b/src/mainboard/msi/ms6156/irq_tables.c deleted file mode 100644 index 816ef1a..0000000 --- a/src/mainboard/msi/ms6156/irq_tables.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router dev */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xb3, /* Checksum */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, - {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, - {0x00, (0x12 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, - {0x00, (0x14 << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, - {0x00, (0x00 << 3) | 0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/msi/ms6156/romstage.c b/src/mainboard/msi/ms6156/romstage.c deleted file mode 100644 index ff888bc..0000000 --- a/src/mainboard/msi/ms6156/romstage.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83977tf/w83977tf.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/msi/ms6178/Kconfig b/src/mainboard/msi/ms6178/Kconfig deleted file mode 100644 index ed6f636..0000000 --- a/src/mainboard/msi/ms6178/Kconfig +++ /dev/null @@ -1,47 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_MSI_MS_6178 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_PGA370 - select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801AX - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default msi/ms6178 - -config MAINBOARD_PART_NUMBER - string - default "MS-6178" - -config IRQ_SLOT_COUNT - int - default 4 - -# No need to override the chipset VGA_BIOS_ID. -config VGA_BIOS_FILE - string - default "i810.vga" - -endif # BOARD_MSI_MS_6178 diff --git a/src/mainboard/msi/ms6178/board_info.txt b/src/mainboard/msi/ms6178/board_info.txt deleted file mode 100644 index 0a15012..0000000 --- a/src/mainboard/msi/ms6178/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: desktop -Board URL: http://no.msi.com/product/mb/MS-6178.html -ROM package: PLCC -ROM socketed: y diff --git a/src/mainboard/msi/ms6178/devicetree.cb b/src/mainboard/msi/ms6178/devicetree.cb deleted file mode 100644 index 26e0e0a..0000000 --- a/src/mainboard/msi/ms6178/devicetree.cb +++ /dev/null @@ -1,84 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 on end # Onboard VGA - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" - - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA/LPC bridge - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 (only header on board) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard/mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # Keyboard interrupt - irq 0x72 = 12 # Mouse interrupt - end - device pnp 2e.6 off end # Consumer IR (TODO) - device pnp 2e.7 on # Game port / MIDI / GPIO 1 - io 0x60 = 0x201 - io 0x62 = 0x330 - irq 0x70 = 9 - end - device pnp 2e.8 on end # GPIO 2 - device pnp 2e.9 on end # GPIO 3 - device pnp 2e.a on end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC'97 audio - device pci 1f.6 on end # AC'97 modem - end - end -end - diff --git a/src/mainboard/msi/ms6178/irq_tables.c b/src/mainboard/msi/ms6178/irq_tables.c deleted file mode 100644 index a2c6483..0000000 --- a/src/mainboard/msi/ms6178/irq_tables.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router device */ - 0x1c00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x1a, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x1e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x1f<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/msi/ms6178/romstage.c b/src/mainboard/msi/ms6178/romstage.c deleted file mode 100644 index ae78990..0000000 --- a/src/mainboard/msi/ms6178/romstage.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/intel/i82810/raminit.h" -#include "cpu/x86/bist.h" -#include "southbridge/intel/i82801ax/i82801ax.h" -#include "drivers/pc80/udelay_io.c" -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - w83627hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - enable_smbus(); - report_bist_failure(bist); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig deleted file mode 100644 index f2cfd9a..0000000 --- a/src/mainboard/msi/ms7135/Kconfig +++ /dev/null @@ -1,58 +0,0 @@ -if BOARD_MSI_MS7135 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_754 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select SUPERIO_WINBOND_W83627THG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default msi/ms7135 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MS-7135" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 13 - -config CK804_PCI_E_X - int - default 0 - -endif # BOARD_MSI_MS7135 diff --git a/src/mainboard/msi/ms7135/acpi_tables.c b/src/mainboard/msi/ms7135/acpi_tables.c deleted file mode 100644 index f5ddec3..0000000 --- a/src/mainboard/msi/ms7135/acpi_tables.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * ACPI support - * written by Stefan Reinauer stepan@openbios.org - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "../../../northbridge/amd/amdk8/acpi.h" - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - device_t dev; - struct resource *res; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); - - /* Initialize interrupt mapping if mptable.c didn't. */ -#if (!CONFIG_GENERATE_MP_TABLE) -#error untested config - pci_write_config32(dev, 0x7c, 0x0120d218); - pci_write_config32(dev, 0x80, 0x12008a00); - pci_write_config32(dev, 0x84, 0x0000007d); -#endif - - /* IRQ of timer */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/msi/ms7135/board_info.txt b/src/mainboard/msi/ms7135/board_info.txt deleted file mode 100644 index 3d933cf..0000000 --- a/src/mainboard/msi/ms7135/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Board name: MS-7135 (K8N Neo3) -Category: desktop -Board URL: http://no.msi.com/product/mb/K8N-Neo3.html -ROM package: PLCC -ROM protocol: LPC -ROM socketed: variable -Flashrom support: y diff --git a/src/mainboard/msi/ms7135/cmos.layout b/src/mainboard/msi/ms7135/cmos.layout deleted file mode 100644 index 694554d..0000000 --- a/src/mainboard/msi/ms7135/cmos.layout +++ /dev/null @@ -1,108 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -448 4 e 10 ram_voltage -452 4 e 11 nf4_voltage -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -#7 3 ROM -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -10 0 2.55 -10 1 2.50 -10 2 2.60 -10 3 2.65 -10 4 2.70 - -11 0 1.50 -11 1 1.55 -11 2 1.60 - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7135/devicetree.cb b/src/mainboard/msi/ms7135/devicetree.cb deleted file mode 100644 index e3f0c8c..0000000 --- a/src/mainboard/msi/ms7135/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_754 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - - device domain 0 on # PCI domain - subsystemid 0x1462 0x7135 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5 - device pnp 4e.8 off end # GPIO 2 - device pnp 4e.9 off end # GPIO 3, GPIO 4 - device pnp 4e.a off end # ACPI - device pnp 4e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end # SMbus - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # Onboard audio (ACI) - device pci 4.1 off end # Onboard modem (MCI), N/A - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 (N/A) - device pci c.0 off end # PCI E 2 (N/A) - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7135/dsdt.asl b/src/mainboard/msi/ms7135/dsdt.asl deleted file mode 100644 index 9410d2f..0000000 --- a/src/mainboard/msi/ms7135/dsdt.asl +++ /dev/null @@ -1,269 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - Name (PICM, 0x00) - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - _SB.GXXX(node, link) - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - -#include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LUOH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LUEH, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LAUD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LMOD, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x00, _SB.PCI0.LPA0, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x00, _SB.PCI0.LSA0, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LSA1, 0x00 }, - - Package (0x04) { 0x0009FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000AFFFF, 0x00, _SB.PCI0.LEMA, 0x00 }, - - Package (0x04) { 0x000BFFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000CFFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000DFFFF, 0x00, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x02, _SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x03, _SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x000EFFFF, 0x00, _SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x01, _SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x02, _SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x03, _SB.PCI0.LNKB, 0x00 }, - }) - - Device (PCIC) - { - Name (_ADR, 0x00090000) - Name (_UID, 0x00) - Name (_PRT, Package () { - /* AGR slot */ - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - /* 2:00 PCIe x1 */ - Device (PEX1) - { - Name (_ADR, 0x000d0000) - Name (_UID, 0x00) - } - - /* 3:00 PCIe x16 */ - Device (PEX0) - { - Name (_ADR, 0x000e0000) - Name (_UID, 0x00) - } - - Device (LPC) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - OperationRegion (CF44, PCI_Config, 0x44, 0x04) - Field (CF44, ByteAcc, NoLock, Preserve) - { - ETBA, 32, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* Parallel port */ - Device (LP0) - { - Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - FixedIO (0x0378, 0x10) - IRQNoFlags () {7} - }) - Return (TMP) - } - } - - /* Floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - FixedIO (0x03F0, 0x08) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } -#if 0 - Device (HPET) - { - Name (_HID, EisaId ("PNP0103")) - Name (CRS, ResourceTemplate () - { - Memory32Fixed (ReadOnly, - 0x00000000, - 0x00001000, - _Y02) - }) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, _SB.PCI0.LPC.HPET._Y02._BAS, HPT) - Store (ETBA, HPT) - Return (CRS) - } - - } -#endif - } - } - } -} diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c deleted file mode 100644 index e364892..0000000 --- a/src/mainboard/msi/ms7135/get_bus_conf.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts and these will be shared by irqtable, - * mptable and acpi_tables. - */ -/* busnum is default */ -unsigned char bus_ck804[6]; -unsigned apicid_ck804; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, //no HTIO for ms7135 -}; -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, //ms7135 has only one ht-chain -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base; - - device_t dev; - unsigned sbdn; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 6; i++) { - bus_ck804[i] = 0; - } - - bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* CK804 */ - int dn = -1; - for (i = 1; i < 4; i++) { - switch (i) { - case 1: dn = 9; break; - case 2: dn = 13; break; - case 3: dn = 14; break; - default: dn = -1; break; - } - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0)); - if (dev) { - bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c deleted file mode 100644 index f3d1c00..0000000 --- a/src/mainboard/msi/ms7135/irq_tables.c +++ /dev/null @@ -1,262 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - -/* This is probably not right, feel free to fix this if you don't want - * to use the mptable. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; - - -/** - * Add one line to IRQ table. - */ -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -/** - * Create the IRQ routing table. - * Values are derived from getpir generated code. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - unsigned sbdn; - - /* get_bus_conf() will find out all bus num and apic that share with - * mptable.c and mptable.c - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804[0]; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - - pirq->exclusive_irqs = 0x828; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - -//Slot1 PCIE 16x - write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, - 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); - pirq_info++; - slot_num++; - -//Slot2 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); - pirq_info++; - slot_num++; - -//Slot3 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); - pirq_info++; - slot_num++; - -//Slot4 PCIE 4x - write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, - 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, - 7, 0); - pirq_info++; - slot_num++; - -//Slot5 - 7 PCI - for (i = 0; i < 3; i++) { - write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, - ((i + 0) % 4) + 1, 0xdeb8, - ((i + 1) % 4) + 1, 0xdeb8, - ((i + 2) % 4) + 1, 0xdeb8, - ((i + 3) % 4) + 1, 0xdeb8, i, 0); - pirq_info++; - slot_num++; - } - -//pci bridge - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); - pirq_info++; - slot_num++; - -//smbus - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - -#if 0 - unsigned char irq[4]; - irq[0] = 0; - irq[1] = 0; - irq[2] = 0; - irq[3] = 0; - - /* Bus, device, slots IRQs for {A,B,C,D}. */ - - irq[0] = 10; /* SMBus */ /* test me */ - pci_assign_irqs(bus_ck804[0], 1, irq); - - irq[0] = 10; /* USB */ - irq[1] = 10; - pci_assign_irqs(bus_ck804[0], 2, irq); - - irq[0] = 10; /* AC97 */ - irq[1] = 0; - pci_assign_irqs(bus_ck804[0], 4, irq); - - irq[0] = 11; /* SATA */ - pci_assign_irqs(bus_ck804[0], 7, irq); - - irq[0] = 5; /* SATA */ - pci_assign_irqs(bus_ck804[0], 8, irq); - - irq[0] = 10; /* Ethernet */ - pci_assign_irqs(bus_ck804[0], 10, irq); - - - /* physical slots */ - - irq[0] = 5; /* PCI E1 - x1 */ - pci_assign_irqs(bus_ck804[2], 0, irq); - - irq[0] = 11; /* PCI E2 - x16 */ - pci_assign_irqs(bus_ck804[3], 0, irq); - - /* AGP-on-PCI "AGR" ignored */ - - irq[0] = 10; /* PCI1 */ - irq[1] = 11; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 7, irq); - - irq[0] = 11; /* PCI2 */ - irq[1] = 10; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 8, irq); - - irq[0] = 5; /* PCI3 */ - irq[1] = 10; - irq[2] = 11; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 9, irq); -#endif - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c deleted file mode 100644 index b43a516..0000000 --- a/src/mainboard/msi/ms7135/mptable.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; -extern unsigned apicid_ck804; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned sbdn; - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &bus_isa); - -/* I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - u32 dword; - - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res->base); - } - - /* Initialize interrupt mapping */ - - /* copied from stock bios */ - /*0x01800500,0x1800d509,0x00520d08*/ - - dword = 0x08d0d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x8d001509; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00010271; - pci_write_config32(dev, 0x84, dword); - - } - } - - /* Now, assemble the table. */ - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \ - bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin)) - -#if 0 - // Onboard ck804 smbus - PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */ - -#endif - // Onboard ck804 USB - PCI_INT(0, sbdn+2, 0, 23); - PCI_INT(0, sbdn+2, 1, 23); - - // Onboard ck804 AC-97 - PCI_INT(0, sbdn+4, 0, 23); - - // Onboard ck804 SATA 0 - PCI_INT(0, sbdn+7, 0, 20); - - // Onboard ck804 SATA 1 - PCI_INT(0, sbdn+8, 0, 21); - - // Onboard ck804 NIC - PCI_INT(0, sbdn+10, 0, 22); - - - /* "AGR" slot */ - PCI_INT(1, 0, 0, 16); - PCI_INT(1, 0, 1, 17); - - /* legacy PCI */ - PCI_INT(1, 7, 0, 17); - PCI_INT(1, 7, 1, 18); - PCI_INT(1, 7, 2, 19); - PCI_INT(1, 7, 3, 16); - - PCI_INT(1, 8, 0, 18); - PCI_INT(1, 8, 1, 19); - PCI_INT(1, 8, 2, 16); - PCI_INT(1, 8, 3, 17); - - PCI_INT(1, 9, 0, 19); - PCI_INT(1, 9, 1, 16); - PCI_INT(1, 9, 2, 17); - PCI_INT(1, 9, 3, 18); - - - /* PCI-E x1 port */ - PCI_INT(2, 0, 0, 19); - /* XXX guesses */ - PCI_INT(2, 0, 1, 16); - PCI_INT(2, 0, 2, 17); - PCI_INT(2, 0, 3, 18); - - /* PCI-E x16 port */ /* XXX fix me ? */ - PCI_INT(3, 0, 0, 18); - /* XXX guesses */ - PCI_INT(3, 0, 1, 19); - PCI_INT(3, 0, 2, 16); - PCI_INT(3, 0, 3, 17); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_ck804[0]); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c deleted file mode 100644 index 15c02f5..0000000 --- a/src/mainboard/msi/ms7135/romstage.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu yinghailu@amd.com for AMD) - * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include <cpu/amd/model_fxx_rev.h> -#include <console/console.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/nvidia/ck804/early_smbus.h" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "northbridge/amd/amdk8/debug.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> - -#if CONFIG_HAVE_OPTION_TABLE -#include "option_table.h" -#endif - -#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "southbridge/nvidia/ck804/early_setup_ss.h" -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void ms7135_set_ram_voltage(void) -{ - u8 b; - b = read_option(ram_voltage, 0); - if (b > 4) /* default if above 2.70v */ - b = 0; - printk(BIOS_INFO, "setting RAM voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x00, b); -} - -static void ms7135_set_nf4_voltage(void) -{ - u8 b; - b = read_option(nf4_voltage, 0); - if (b > 2) /* default if above 1.60v */ - b = 0; - b |= 0x10; - printk(BIOS_INFO, "setting NF4 voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x02, b); -} - -static void sio_setup(void) -{ - u32 dword; - u8 byte; - - /* Subject decoding */ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1 << 0) | (1 << 1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { - DIMM0, DIMM1, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - ms7135_set_nf4_voltage(); - ms7135_set_ram_voltage(); - -#if CONFIG_DEBUG_SMBUS - dump_spd_registers(&ctrl[0]); - dump_smbus_registers(); -#endif - - sdram_initialize(nodes, ctrl); - - post_cache_as_ram(); -} diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig deleted file mode 100644 index 0e7e592..0000000 --- a/src/mainboard/msi/ms7260/Kconfig +++ /dev/null @@ -1,78 +0,0 @@ -if BOARD_MSI_MS7260 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms7260 - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "MS-7260" - -config PCI_64BIT_PREF_MEM - bool - default n - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 0 - -endif # BOARD_MSI_MS7260 diff --git a/src/mainboard/msi/ms7260/board_info.txt b/src/mainboard/msi/ms7260/board_info.txt deleted file mode 100644 index 431899a..0000000 --- a/src/mainboard/msi/ms7260/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: MS-7260 (K9N Neo) -Category: desktop -Board URL: http://no.msi.com/product/mb/K9N-Neo--PCB-1-0-.html -ROM package: PLCC -ROM socketed: y -Flashrom support: coreboot-only diff --git a/src/mainboard/msi/ms7260/cmos.layout b/src/mainboard/msi/ms7260/cmos.layout deleted file mode 100644 index dd56268..0000000 --- a/src/mainboard/msi/ms7260/cmos.layout +++ /dev/null @@ -1,118 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# TODO: Check and fix up the values as needed. - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb deleted file mode 100644 index 717ad00..0000000 --- a/src/mainboard/msi/ms7260/devicetree.cb +++ /dev/null @@ -1,143 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x7260 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 / IrDA - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - irq 0x72 = 12 # PS/2 mouse IRQ - end - device pnp 4e.106 off # Serial flash interface (SFI) - # io 0x62 = 0x100 - end - device pnp 4e.007 off # GPIO 1 - end - device pnp 4e.107 off # Game port - # io 0x60 = 0x220 # Datasheet: 0x201 - end - device pnp 4e.207 off # MIDI - # io 0x62 = 0x300 # Datasheet: 0x330 - # irq 0x70 = 9 - end - device pnp 4e.307 off # GPIO 6 - end - device pnp 4e.8 off # WDTO#, PLED - end - device pnp 4e.009 off # GPIO 2 - end - device pnp 4e.109 off # GPIO 3 - end - device pnp 4e.209 off # GPIO 4 - end - device pnp 4e.309 off # GPIO 5 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b on # Hardware monitor - io 0x60 = 0xa10 - # TODO: IRQ? - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - # TODO: Check if the stuff below is correct / needed. - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 (N/A on this board) - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A on this board) - device pci a.0 off end # PCI E 5 (N/A on this board?) - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO: Check the two lines below. - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c deleted file mode 100644 index 34d3834..0000000 --- a/src/mainboard/msi/ms7260/get_bus_conf.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ -// busnum is default. -unsigned char bus_mcp55[8]; // 1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { - /* Here you only need to set value in pci1234 for HT-IO that could - * be installed or not. You may need to preset pci1234 for HTIO board, - * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. - */ - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { - /* HT Chain device num, actually it is unit id base of every ht - * device in chain, assume every chain only have 4 ht device at most. - */ - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned int apicid_base, sbdn; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) - bus_mcp55[i] = 0; - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk - (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_mcp55 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7260/irq_tables.c b/src/mainboard/msi/ms7260/irq_tables.c deleted file mode 100644 index 15ac432..0000000 --- a/src/mainboard/msi/ms7260/irq_tables.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_mcp55[8]; // 1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned int slot_num, sbdn; - uint8_t *v; - uint8_t sum = 0; - int i; - - /* Will find out all bus num and apic that share with mptable.c - * and mptable.c and acpi_tables.c. - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 and 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - pirq->exclusive_irqs = 0; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */ - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* PCI bridge (00:06.0) */ - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7260/mainboard.c b/src/mainboard/msi/ms7260/mainboard.c deleted file mode 100644 index 492693a..0000000 --- a/src/mainboard/msi/ms7260/mainboard.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> - -#if 0 - - -static void mainboard_enable(device_t dev) -{ -} -#endif - -struct chip_operations mainboard_ops = { - // .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/msi/ms7260/mptable.c b/src/mainboard/msi/ms7260/mptable.c deleted file mode 100644 index ea003a8..0000000 --- a/src/mainboard/msi/ms7260/mptable.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; // 1 -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned int sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd0001202; - pci_write_config32(dev, 0x84, dword); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22 - - for (j = 7; j >= 2; j--) { - if (!bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); - } - - for (j = 0; j < 2; j++) { - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4); - } - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7260/resourcemap.c b/src/mainboard/msi/ms7260/resourcemap.c deleted file mode 100644 index 6a9329a..0000000 --- a/src/mainboard/msi/ms7260/resourcemap.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c deleted file mode 100644 index fd8fbfb..0000000 --- a/src/mainboard/msi/ms7260/romstage.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <lib.h> -#include <spd.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) - -static void memreset(int controllers, const struct mem_controller *ctrl) {} -static inline void activate_spd_rom(const struct mem_controller *ctrl) {} - -static inline int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* FIXME: This should be part of the Super I/O code/config. */ - pnp_enter_ext_func_mode(SERIAL_DEV); - /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ - pnp_write_config(SERIAL_DEV, 0x24, 0); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - pnp_exit_ext_func_mode(SERIAL_DEV); - - setup_mb_resource_map(); - console_init(); - report_bist_failure(bist); /* Halt upon BIST failure. */ - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - print_debug("bsp_apicid="); - print_debug_hex8(bsp_apicid); - print_debug("\n"); - - /* In BSP so could hold all AP until sysinfo is in RAM. */ - set_sysinfo_in_ram(0); - - setup_coherent_ht_domain(); /* Routing table and start other core0. */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched - * becase optimize_link_coherent_ht is moved out from - * setup_coherent_ht_domain, so here need to make sure last core0 is - * started, esp for two way system (there may be APIC ID conflicts in - * that case). - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* Set up chains and store link pair for optimization later. */ - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - -#if CONFIG_SET_FIDVID - { - msr_t msr = rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\n"); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - { - msr_t msr = rdmsr(0xc0010042); - print_debug("end msr fid, vid "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\n"); - } -#endif - - init_timer(); /* Need to use TMICT to synconize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */ - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl in sysinfo now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* All AP stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - /* bsp switch stack to RAM and copy sysinfo RAM now. */ - post_cache_as_ram(); -} diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig deleted file mode 100644 index 0b0ff1c..0000000 --- a/src/mainboard/msi/ms9185/Kconfig +++ /dev/null @@ -1,65 +0,0 @@ -if BOARD_MSI_MS9185 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM5780 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms9185 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "MS-9185" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9185 diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt deleted file mode 100644 index 8ffecdb..0000000 --- a/src/mainboard/msi/ms9185/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: K9SD Master-S2R (MS-9185) -Category: server -Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_918... diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout deleted file mode 100644 index c5e27fe..0000000 --- a/src/mainboard/msi/ms9185/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb deleted file mode 100644 index 013bba3..0000000 --- a/src/mainboard/msi/ms9185/devicetree.cb +++ /dev/null @@ -1,87 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - # devices on link 0 - chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 - end - device pci 2.0 on end # PCI E 1 #0x0132 - device pci 3.0 on end # PCI E 2 - device pci 4.0 on end # PCI E 3 - device pci 5.0 on end # PCI E 4 - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - device pci e.1 on end # SATA 0x024a bx_a001 - device pci e.2 on end # SATA 0x024a bx_a001 - device pci e.3 on end # SATA 0x024a bx_a001 - end - device pci 1.0 on # Legacy pci main 0x0205 - end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end - end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # it is in bcm5785_0 bus - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - end #domain -end - - diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c deleted file mode 100644 index 3a70d83..0000000 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - int i; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); - if (dev) { - m->bus_bcm5785_1_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for (i = 1; i < 7; i++) { - dev = - dev_find_slot(m->bus_bcm5780[0], - PCI_DEVFN(m->sbdn2 + i - 1, 0)); - if (dev) { - m->bus_bcm5780[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5780[0], m->sbdn2 + i - 1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - for (i = 0; i < 3; i++) - m->apicid_bcm5785[i] = apicid_base + i; -} diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c deleted file mode 100644 index 963f5d2..0000000 --- a/src/mainboard/msi/ms9185/irq_tables.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum=0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_bcm5785_0; - pirq->rtr_devfn = (sysconf.sbdn<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1166; - pirq->rtr_device = 0x0036; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h deleted file mode 100644 index 4b27fc3..0000000 --- a/src/mainboard/msi/ms9185/mb_sysconf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c deleted file mode 100644 index b30ab73..0000000 --- a/src/mainboard/msi/ms9185/mptable.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int i, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev = 0; - struct resource *res; - for(i=0; i<3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); - } - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - -//IDE - outb(0x02, 0xc00); outb(0x0e, 0xc01); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE - -//SATA - outb(0x07, 0xc00); outb(0x0f, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xf); - -//USB - outb(0x01, 0xc00); outb(0x0a, 0xc01); - for(i=0;i<3;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // - } - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - device_t dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if(dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1<<4); // enable interrupts - pci_write_config32(dev, 0x6c, dword); - } - } - -//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 - // AIC 8130 Galileo Technology... - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (6<<2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // - } - - -//pci slot (on bcm5785) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (5<<2)|i, m->apicid_bcm5785[1], 8+i%4); // - } - - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (4<<2)|0, m->apicid_bcm5785[1], 0x1); - -//PCI-X on bcm5780 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[1], (4<<2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // - } - -//onboard Broadcom - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[2], (4<<2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // - } - - -// First PCI-E x8 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0<<2)|i, m->apicid_bcm5785[1], 0xe); // - } - - -// Second PCI-E x8 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[3], (0<<2)|i, m->apicid_bcm5785[1], 0xc); // - } - -// Third PCI-E x1 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[4], (0<<2)|i, m->apicid_bcm5785[1], 0xd); // - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c deleted file mode 100644 index 7d051bf..0000000 --- a/src/mainboard/msi/ms9185/resourcemap.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer stepan@coresystems.de - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ms9185 needs a different resource map - * - */ - -static void setup_ms9185_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c deleted file mode 100644 index aabc826..0000000 --- a/src/mainboard/msi/ms9185/romstage.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <reset.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/nsc/pc87417/early_serial.c" -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/broadcom/bcm5785/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) -#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define RC0 (0x10<<8) -#define RC1 (0x01<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - //second node - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - -// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_ms9185_resource_map(); -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); -#endif - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); -//bx_a010- wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - bcm5785_early_setup(); - -#if 0 - //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time. - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); -#endif - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - } -#endif - -#if 1 - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } -#endif - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - -#if 0 - int i; - for(i=0;i<2;i++) { - activate_spd_rom(sysinfo->ctrl+i); - dump_smbus_registers(); - } -#endif - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -#if 0 - print_pci_devices(); -#endif - -#if 0 -// dump_pci_devices(); - dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98); - dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98); -#endif - - post_cache_as_ram(); -} diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig deleted file mode 100644 index f109375..0000000 --- a/src/mainboard/msi/ms9282/Kconfig +++ /dev/null @@ -1,68 +0,0 @@ -if BOARD_MSI_MS9282 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_ADM1027 - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default msi/ms9282 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "MS-9282" - -config PCI_64BIT_PREF_MEM - bool - default n - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9282 diff --git a/src/mainboard/msi/ms9282/board_info.txt b/src/mainboard/msi/ms9282/board_info.txt deleted file mode 100644 index 2f8e688..0000000 --- a/src/mainboard/msi/ms9282/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: K9SD Master (MS-9282) -Category: server -Board URL: http://cweb.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=63... diff --git a/src/mainboard/msi/ms9282/cmos.layout b/src/mainboard/msi/ms9282/cmos.layout deleted file mode 100644 index f50c53e..0000000 --- a/src/mainboard/msi/ms9282/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb deleted file mode 100644 index 747347e..0000000 --- a/src/mainboard/msi/ms9282/devicetree.cb +++ /dev/null @@ -1,182 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9282 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off end # WDTO#, PLED - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux - device i2c 70 on # 0 pca9554 1 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - device i2c 70 on # 0 pca9554 2 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - end - end - device pci 1.1 on # SM 1 - chip drivers/i2c/i2cmux2 # pca9554 SMBus mux - device i2c 72 on # PCA9554 channel 1 - chip drivers/i2c/adm1027 # HWM ADT7476 1 - device i2c 2e on end - end - end - device i2c 72 on # PCA9545 channel 2 - chip drivers/i2c/adm1027 # HWM ADT7463 - device i2c 2e on end - end - end - device i2c 72 on end # PCA9545 channel 3 - device i2c 72 on # PCA9545 channel 4 - chip drivers/i2c/adm1027 # HWM ADT7476 2 - device i2c 2e on end - end - end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # P2P - device pci 4.0 on end - end - device pci 7.0 on end # reserve - device pci 8.0 on end # MAC0 - device pci 9.0 on end # MAC1 - device pci a.0 on - device pci 0.0 on - device pci 4.0 on end # PCI-E LAN1 - device pci 4.1 on end # PCI-E LAN2 - end - end # 0x376 - device pci b.0 on end # PCI E 0x374 - device pci c.0 on end - device pci d.0 on # SAS - device pci 0.0 on end - end # PCI E 1 0x378 - device pci e.0 on end # PCI E 0 0x375 - device pci f.0 on end # PCI E 0x377, PCI-E slot - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c deleted file mode 100644 index 195ddc4..0000000 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - struct mb_sysconf_t *m; - - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sysconf.sbdn + 0x06); - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(m->bus_mcp55[0], - PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); - if (dev) { - m->bus_mcp55[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - m->apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c deleted file mode 100644 index b41ca95..0000000 --- a/src/mainboard/msi/ms9282/irq_tables.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/msi/ms9282/mainboard.c b/src/mainboard/msi/ms9282/mainboard.c deleted file mode 100644 index c7e459a..0000000 --- a/src/mainboard/msi/ms9282/mainboard.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> - - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h deleted file mode 100644 index 4b15168..0000000 --- a/src/mainboard/msi/ms9282/mb_sysconf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c deleted file mode 100644 index 1764cf3..0000000 --- a/src/mainboard/msi/ms9282/mptable.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - -//SMBUS - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - -//USB1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - -//USB2.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - -//SATA2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - -//NIC1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 -//NIC2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for(j=7; j>=2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c deleted file mode 100644 index 76b7dc8..0000000 --- a/src/mainboard/msi/ms9282/resourcemap.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer stepan@coresystems.de - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@gmail.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * MSI ms9282 needs a different resource map - * - */ - -static void setup_ms9282_resource_map(void) -{ - static const unsigned int register_values[] = { -#if 1 - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, -#endif -#if 1 - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, -#endif -#if 1 - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, -#endif - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -#if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, -#endif - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c deleted file mode 100644 index 9a6e21f..0000000 --- a/src/mainboard/msi/ms9282/romstage.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi bingxunshi@gmail.com for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include "cpu/x86/bist.h" -#include <spd.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <device/pci_ids.h> -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" - -//set GPIO to input mode -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ - -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -// Disabled until it's actually used: -// #include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); -} - -//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. -#define RC0 (2<<8) -#define RC1 (1<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - // node 1 - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - unsigned bsp_apicid = 0; - int needs_reset; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) { - //init_cpus(cpu_init_detectedx); - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ms9282_resource_map(); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - //wait_all_other_cores_started(bsp_apicid); -#endif - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - init_timer(); /* Need to use TMICT to synconize FID/VID. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_cache_as_ram(); -} diff --git a/src/mainboard/msi/ms9652_fam10/Kconfig b/src/mainboard/msi/ms9652_fam10/Kconfig deleted file mode 100644 index 15e179a..0000000 --- a/src/mainboard/msi/ms9652_fam10/Kconfig +++ /dev/null @@ -1,116 +0,0 @@ -if BOARD_MSI_MS9652_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F_1207 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select BOARD_ROMSIZE_KB_512 - select ENABLE_APIC_EXT_ID - select AMDMCT - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select LIFT_BSP_APIC_ID - select IOAPIC - select SMP - -config MAINBOARD_DIR - string - default msi/ms9652_fam10 - -config DCACHE_RAM_BASE - hex - default 0xc4000 - -config DCACHE_RAM_SIZE - hex - default 0x0c000 - -# Define to 0 because the IRQ slot count is -# determined dynamically for this board. -config IRQ_SLOT_COUNT - int - default 0 - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HEAP_SIZE - hex - default 0x20000 - -config USE_OPTION_TABLE - bool - default n - -config MAINBOARD_PART_NUMBER - string - default "MS-9652" - -config RAMBASE - hex - default 0x200000 - -config DEFAULT_CONSOLE_LOGLEVEL - int - default 9 - -config MAINBOARD_POWER_ON_AFTER_POWER_FAIL - bool - default y - -config USBDEBUG - bool - default n - -config HT_CHAIN_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x00 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config VAR_MTRR_HOLE - bool - default n - -config APIC_ID_OFFSET - hex - default 0x00 - -config RAMTOP - hex - default 0x1000000 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_01000096.h" - -config HT3_SUPPORT - bool - default y - -config MCP55_PCI_E_X_0 - int - default 1 - -endif # BOARD_MSI_MS9652_FAM10 diff --git a/src/mainboard/msi/ms9652_fam10/acpi_tables.c b/src/mainboard/msi/ms9652_fam10/acpi_tables.c deleted file mode 100644 index 148ac1a..0000000 --- a/src/mainboard/msi/ms9652_fam10/acpi_tables.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Written by Stefan Reinauer stepan@openbios.org. - * ACPI FADT, FACS, and DSDT table support added by - * - * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org - * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci_ids.h> -//#include "northbridge/amd/amdfam10/amdfam10_acpi.h" -#include <cpu/amd/powernow.h> -#include <device/pci.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -extern const unsigned char AmlCode[]; - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x18; - struct mb_sysconf_t *m; - //extern unsigned char bus_mcp55[8]; - //extern unsigned apicid_mcp55; - - unsigned sbdn; - struct resource *res; - device_t dev; - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - m->apicid_mcp55, res->base, 0); - } - } - - /* Write NB IOAPIC. */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - m->apicid_mcp55++, res->base, gsi_base); - } - } - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} - -unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) -{ - //k8acpi_write_vars(); - //amd_generate_powernow(0, 0, 0); - //return (unsigned long) (acpigen_get_current()); - return 0; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_srat_t *srat; - acpi_rsdt_t *rsdt; - acpi_mcfg_t *mcfg; - acpi_hpet_t *hpet; - acpi_madt_t *madt; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_slit_t *slit; - acpi_header_t *ssdt; - acpi_header_t *dsdt; - - /* Align ACPI tables to 16 byte. */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT table. */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* Clear all table memory. */ - memset((void *) start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* We explicitly add these tables later on: */ - printk(BIOS_DEBUG, "ACPI: * FACS\n"); - - /* we should align FACS to 64B as per ACPI specs */ - current = ALIGN(current, 64); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - dsdt = (acpi_header_t *) current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); - dsdt->checksum = 0; /* Don't trust iasl to get this right. */ - dsdt->checksum = acpi_checksum((u8 *)dsdt, dsdt->length); - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, - dsdt->length); - printk(BIOS_DEBUG, "ACPI: * FADT\n"); - - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt, facs, dsdt); - acpi_add_table(rsdp, fadt); - - printk(BIOS_DEBUG, "ACPI: * HPET\n"); - hpet = (acpi_hpet_t *) current; - current += sizeof(acpi_hpet_t); - acpi_create_hpet(hpet); - acpi_add_table(rsdp, hpet); - - /* If we want to use HPET timers Linux wants an MADT. */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - printk(BIOS_DEBUG, "ACPI: * MCFG\n"); - mcfg = (acpi_mcfg_t *) current; - acpi_create_mcfg(mcfg); - current += mcfg->header.length; - acpi_add_table(rsdp, mcfg); - - printk(BIOS_DEBUG, "ACPI: * SRAT\n"); - srat = (acpi_srat_t *) current; - acpi_create_srat(srat); - current += srat->header.length; - acpi_add_table(rsdp, srat); - - /* SLIT */ - printk(BIOS_DEBUG, "ACPI: * SLIT\n"); - slit = (acpi_slit_t *) current; - acpi_create_slit(slit); - current+=slit->header.length; - acpi_add_table(rsdp, slit); - - /* SSDT */ - printk(BIOS_DEBUG, "ACPI: * SSDT\n"); - ssdt = (acpi_header_t *)current; - - acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); - current += ssdt->length; - acpi_add_table(rsdp, ssdt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/msi/ms9652_fam10/board_info.txt b/src/mainboard/msi/ms9652_fam10/board_info.txt deleted file mode 100644 index 31cf750..0000000 --- a/src/mainboard/msi/ms9652_fam10/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: desktop diff --git a/src/mainboard/msi/ms9652_fam10/cmos.layout b/src/mainboard/msi/ms9652_fam10/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/msi/ms9652_fam10/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9652_fam10/devicetree.cb b/src/mainboard/msi/ms9652_fam10/devicetree.cb deleted file mode 100644 index a6d5206..0000000 --- a/src/mainboard/msi/ms9652_fam10/devicetree.cb +++ /dev/null @@ -1,169 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## Copyright (C) 2010 Raptor Engineering -## Written by Timothy Pearson tpearson@raptorengineeringinc.com for Raptor Engineering. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9652 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on # Link 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 on # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 on # MIDI - io 0x62 = 0x330 - irq 0x70 = 0xa - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - # chip drivers/generic/generic # MAC EEPROM - # device i2c 51 on end - # end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # HT 1.0 - device pci 18.0 on end # HT 2.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - end - end -end diff --git a/src/mainboard/msi/ms9652_fam10/dsdt.asl b/src/mainboard/msi/ms9652_fam10/dsdt.asl deleted file mode 100644 index 8717f19..0000000 --- a/src/mainboard/msi/ms9652_fam10/dsdt.asl +++ /dev/null @@ -1,302 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com - * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net - * - * ISA portions taken from QEMU acpi-dsdt.dsl. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - #include <northbridge/amd/amdk8/util.asl> - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - */ - Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - */ - Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) - Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) - Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ - Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ - Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ - Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ - Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ - Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ - Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ - }) - - Device (PEBF) /* PCI-E Bridge F */ - { - Name (_ADR, 0x000F0000) - Name (_UID, 0x00) - Name (_BBN, 0x07) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBE) /* PCI-E Bridge E */ - { - Name (_ADR, 0x000E0000) - Name (_UID, 0x00) - Name (_BBN, 0x06) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PEBD) /* PCI-E Bridge D */ - { - Name (_ADR, 0x000D0000) - Name (_UID, 0x00) - Name (_BBN, 0x05) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, - }) - } - - Device (PEBC) /* PCI-E Bridge C */ - { - Name (_ADR, 0x000C0000) - Name (_UID, 0x00) - Name (_BBN, 0x04) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, - }) - } - - Device (PEBB) /* PCI-E Bridge B */ - { - Name (_ADR, 0x000B0000) - Name (_UID, 0x00) - Name (_BBN, 0x03) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, - }) - } - - Device (PEBA) /* PCI-E Bridge A */ - { - Name (_ADR, 0x000A0000) - Name (_UID, 0x00) - Name (_BBN, 0x02) - Name (_PRT, Package () { - Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, - }) - } - - Device (PCID) /* PCI Device */ - { - Name (_ADR, 0x00060000) - Name (_UID, 0x00) - Name (_BBN, 0x01) - Name (_PRT, Package () { - Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, - Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ - Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, - Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, - Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ - Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, - Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, - Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, - Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, - Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, - Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ - Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, - Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, - Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, - }) - } - } - - Device (ISA) { - Name (_ADR, 0x000010000) - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP0, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP0) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP1, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {12} - }) - Return (TMP1) - } - } - - /* PS/2 floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) - IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } - /* Parallel Port */ - Device (LPT1) - { - Name (_HID, EisaId ("PNP0400")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) - IRQNoFlags () {7} - }) - Return (BUF1) - } - } - /* Parallel Port ECP */ - Device (ECP1) - { - Name (_HID, EisaId ("PNP0401")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () { - IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) - IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) - IRQNoFlags() {7} - DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} - }) - Return (BUF1) - } - } - } - } -} diff --git a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c b/src/mainboard/msi/ms9652_fam10/get_bus_conf.c deleted file mode 100644 index 36ae12c..0000000 --- a/src/mainboard/msi/ms9652_fam10/get_bus_conf.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -/* Here you only need to set value in pci1234 for HT-IO that could be -installed or not You may need to preset pci1234 for HTIO board, please -refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ -static u32 pci1234x[] = { - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, - }; - - -/* HT Chain device num, actually it is unit id base of every ht device -in chain, assume every chain only have 4 ht device at most */ - -static unsigned hcdnx[] = { - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, -}; - -extern void get_pci1234(void); - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base; - struct mb_sysconf_t *m; - - device_t dev; - int i; - - printk(BIOS_SPEW, "get_bus_conf()\n"); - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } - - for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); - printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n", apicid_base); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n", apicid_base); -#endif - m->apicid_mcp55 = apicid_base+0; -} diff --git a/src/mainboard/msi/ms9652_fam10/irq_tables.c b/src/mainboard/msi/ms9652_fam10/irq_tables.c deleted file mode 100644 index 54a4e54..0000000 --- a/src/mainboard/msi/ms9652_fam10/irq_tables.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } - -#if CONFIG_CBB - write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - if(sysconf.nodes>32) { - write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/msi/ms9652_fam10/mainboard.c b/src/mainboard/msi/ms9652_fam10/mainboard.c deleted file mode 100644 index 96760d6..0000000 --- a/src/mainboard/msi/ms9652_fam10/mainboard.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> - - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/msi/ms9652_fam10/mb_sysconf.h b/src/mainboard/msi/ms9652_fam10/mb_sysconf.h deleted file mode 100644 index ad78ef6..0000000 --- a/src/mainboard/msi/ms9652_fam10/mb_sysconf.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/msi/ms9652_fam10/mptable.c b/src/mainboard/msi/ms9652_fam10/mptable.c deleted file mode 100644 index 09a25f2..0000000 --- a/src/mainboard/msi/ms9652_fam10/mptable.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for(j=7; j>=2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9652_fam10/resourcemap.c b/src/mainboard/msi/ms9652_fam10/resourcemap.c deleted file mode 100644 index 3751183..0000000 --- a/src/mainboard/msi/ms9652_fam10/resourcemap.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00004000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - /* Verified against board configuration registers after normal proprietary BIOS boot */ - //PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001033, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - /* Verified against board configuration registers after normal proprietary BIOS boot */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c deleted file mode 100644 index 3993bae..0000000 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 1 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdfam10/debug.c" -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" - -static void sio_setup(void) -{ - u32 dword; - u8 byte; - - byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); -} - -static const u8 spd_addr[] = { - //first node - RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, -#endif -}; - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - u32 bsp_apicid = 0, val, wants_reset; - u8 reg; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sio_setup(); - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - post_code(0x32); - - pnp_enter_ext_func_mode(SERIAL_DEV); - /* We have 24MHz input. */ - reg = pnp_read_config(SERIAL_DEV, 0x24); - pnp_write_config(SERIAL_DEV, 0x24, (reg & 0xbf)); - pnp_exit_ext_func_mode(SERIAL_DEV); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - printk(BIOS_DEBUG, "finalize_node_setup done\n"); - - /* Setup any mainboard PCI settings etc. */ - printk(BIOS_DEBUG, "setup_mb_resource_map begin\n"); - setup_mb_resource_map(); - printk(BIOS_DEBUG, "setup_mb_resource_map end\n"); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ - wait_all_core0_started(); - -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - printk(BIOS_DEBUG, "wait_all_other_cores_started()\n"); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - init_timer(); /* Need to use TMICT to synconize FID/VID. */ - - wants_reset = mcp55_early_setup_x(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - post_code(0x3D); - - printk(BIOS_DEBUG, "enable_smbus()\n"); - enable_smbus(); - - post_code(0x40); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x43); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/msi/ms_6119/Kconfig b/src/mainboard/msi/ms_6119/Kconfig new file mode 100644 index 0000000..67c868c --- /dev/null +++ b/src/mainboard/msi/ms_6119/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_MSI_MS_6119 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default msi/ms_6119 + +config MAINBOARD_PART_NUMBER + string + default "MS-6119" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_MSI_MS_6119 diff --git a/src/mainboard/msi/ms_6119/board_info.txt b/src/mainboard/msi/ms_6119/board_info.txt new file mode 100644 index 0000000..2a029e4 --- /dev/null +++ b/src/mainboard/msi/ms_6119/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +Board URL: http://no.msi.com/product/mb/MS-6119.html +ROM package: DIP32 +ROM protocol: Parallel diff --git a/src/mainboard/msi/ms_6119/devicetree.cb b/src/mainboard/msi/ms_6119/devicetree.cb new file mode 100644 index 0000000..159a444 --- /dev/null +++ b/src/mainboard/msi/ms_6119/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/msi/ms_6119/irq_tables.c b/src/mainboard/msi/ms_6119/irq_tables.c new file mode 100644 index 0000000..89c32e7 --- /dev/null +++ b/src/mainboard/msi/ms_6119/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0x800, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9c, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/msi/ms_6119/romstage.c b/src/mainboard/msi/ms_6119/romstage.c new file mode 100644 index 0000000..be273f3 --- /dev/null +++ b/src/mainboard/msi/ms_6119/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/msi/ms_6147/Kconfig b/src/mainboard/msi/ms_6147/Kconfig new file mode 100644 index 0000000..7ebb7b0 --- /dev/null +++ b/src/mainboard/msi/ms_6147/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_MSI_MS_6147 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default msi/ms_6147 + +config MAINBOARD_PART_NUMBER + string + default "MS-6147" + +config IRQ_SLOT_COUNT + int + default 8 + +endif # BOARD_MSI_MS_6147 diff --git a/src/mainboard/msi/ms_6147/board_info.txt b/src/mainboard/msi/ms_6147/board_info.txt new file mode 100644 index 0000000..62d41dd --- /dev/null +++ b/src/mainboard/msi/ms_6147/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +Board URL: http://no.msi.com/product/mb/MS-6147.html +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y diff --git a/src/mainboard/msi/ms_6147/devicetree.cb b/src/mainboard/msi/ms_6147/devicetree.cb new file mode 100644 index 0000000..55f2745 --- /dev/null +++ b/src/mainboard/msi/ms_6147/devicetree.cb @@ -0,0 +1,60 @@ +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/msi/ms_6147/irq_tables.c b/src/mainboard/msi/ms_6147/irq_tables.c new file mode 100644 index 0000000..c8978d1 --- /dev/null +++ b/src/mainboard/msi/ms_6147/irq_tables.c @@ -0,0 +1,51 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Mats Erik Andersson mats.andersson@gisladisker.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router device */ + 0x1c00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x20, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x0e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x00<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, /* North bridge */ + {0x00,(0x07<<3)|0x1, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, /* IDE */ + {0x00,(0x07<<3)|0x2, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, /* UHCI */ + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, /* AGP bridge */ + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/msi/ms_6147/romstage.c b/src/mainboard/msi/ms_6147/romstage.c new file mode 100644 index 0000000..c3a7557 --- /dev/null +++ b/src/mainboard/msi/ms_6147/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Mats Erik Andersson mats.andersson@gisladisker.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include <cpu/x86/bist.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/msi/ms_6156/Kconfig b/src/mainboard/msi/ms_6156/Kconfig new file mode 100644 index 0000000..4fb3898 --- /dev/null +++ b/src/mainboard/msi/ms_6156/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_MSI_MS_6156 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_WINBOND_W83977TF + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default msi/ms_6156 + +config MAINBOARD_PART_NUMBER + string + default "MS-6156" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_MSI_MS_6156 diff --git a/src/mainboard/msi/ms_6156/board_info.txt b/src/mainboard/msi/ms_6156/board_info.txt new file mode 100644 index 0000000..beec822 --- /dev/null +++ b/src/mainboard/msi/ms_6156/board_info.txt @@ -0,0 +1,6 @@ +Category: desktop +Board URL: http://no.msi.com/product/mb/MS-6156VA.html +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/msi/ms_6156/devicetree.cb b/src/mainboard/msi/ms_6156/devicetree.cb new file mode 100644 index 0000000..d1fd3f8 --- /dev/null +++ b/src/mainboard/msi/ms_6156/devicetree.cb @@ -0,0 +1,81 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 off # GPIO 1 + end + device pnp 3f0.8 off # GPIO 2 + end + device pnp 3f0.9 off # GPIO 3 + end + device pnp 3f0.a off # ACPI + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + device pci 14.0 on end # Onboard audio (Ensoniq ES1371) + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "1" + register "ide0_drive1_udma33_enable" = "1" + register "ide1_drive0_udma33_enable" = "1" + register "ide1_drive1_udma33_enable" = "1" + end + end +end diff --git a/src/mainboard/msi/ms_6156/irq_tables.c b/src/mainboard/msi/ms_6156/irq_tables.c new file mode 100644 index 0000000..816ef1a --- /dev/null +++ b/src/mainboard/msi/ms_6156/irq_tables.c @@ -0,0 +1,50 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router dev */ + 0x800, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xb3, /* Checksum */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, + {0x00, (0x00 << 3) | 0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/msi/ms_6156/romstage.c b/src/mainboard/msi/ms_6156/romstage.c new file mode 100644 index 0000000..ff888bc --- /dev/null +++ b/src/mainboard/msi/ms_6156/romstage.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83977tf/w83977tf.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/msi/ms_6178/Kconfig b/src/mainboard/msi/ms_6178/Kconfig new file mode 100644 index 0000000..044ec13 --- /dev/null +++ b/src/mainboard/msi/ms_6178/Kconfig @@ -0,0 +1,47 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_MSI_MS_6178 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801AX + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default msi/ms_6178 + +config MAINBOARD_PART_NUMBER + string + default "MS-6178" + +config IRQ_SLOT_COUNT + int + default 4 + +# No need to override the chipset VGA_BIOS_ID. +config VGA_BIOS_FILE + string + default "i810.vga" + +endif # BOARD_MSI_MS_6178 diff --git a/src/mainboard/msi/ms_6178/board_info.txt b/src/mainboard/msi/ms_6178/board_info.txt new file mode 100644 index 0000000..0a15012 --- /dev/null +++ b/src/mainboard/msi/ms_6178/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +Board URL: http://no.msi.com/product/mb/MS-6178.html +ROM package: PLCC +ROM socketed: y diff --git a/src/mainboard/msi/ms_6178/devicetree.cb b/src/mainboard/msi/ms_6178/devicetree.cb new file mode 100644 index 0000000..26e0e0a --- /dev/null +++ b/src/mainboard/msi/ms_6178/devicetree.cb @@ -0,0 +1,84 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 on end # Onboard VGA + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 (only header on board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard/mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # Keyboard interrupt + irq 0x72 = 12 # Mouse interrupt + end + device pnp 2e.6 off end # Consumer IR (TODO) + device pnp 2e.7 on # Game port / MIDI / GPIO 1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end + device pnp 2e.8 on end # GPIO 2 + device pnp 2e.9 on end # GPIO 3 + device pnp 2e.a on end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 on end # AC'97 modem + end + end +end + diff --git a/src/mainboard/msi/ms_6178/irq_tables.c b/src/mainboard/msi/ms_6178/irq_tables.c new file mode 100644 index 0000000..a2c6483 --- /dev/null +++ b/src/mainboard/msi/ms_6178/irq_tables.c @@ -0,0 +1,47 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router device */ + 0x1c00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x1a, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x1e<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x1f<<3)|0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/msi/ms_6178/romstage.c b/src/mainboard/msi/ms_6178/romstage.c new file mode 100644 index 0000000..ae78990 --- /dev/null +++ b/src/mainboard/msi/ms_6178/romstage.c @@ -0,0 +1,52 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "northbridge/intel/i82810/raminit.h" +#include "cpu/x86/bist.h" +#include "southbridge/intel/i82801ax/i82801ax.h" +#include "drivers/pc80/udelay_io.c" +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + w83627hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + enable_smbus(); + report_bist_failure(bist); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/msi/ms_7135/Kconfig b/src/mainboard/msi/ms_7135/Kconfig new file mode 100644 index 0000000..e5ee219 --- /dev/null +++ b/src/mainboard/msi/ms_7135/Kconfig @@ -0,0 +1,58 @@ +if BOARD_MSI_MS_7135 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_754 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_CK804 + select SUPERIO_WINBOND_W83627THG + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select CK804_USE_NIC + select CK804_USE_ACI + select QRANK_DIMM_SUPPORT + select HAVE_ACPI_TABLES + +config MAINBOARD_DIR + string + default msi/ms_7135 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "MS-7135" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HT_CHAIN_UNITID_BASE + hex + default 0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 13 + +config CK804_PCI_E_X + int + default 0 + +endif # BOARD_MSI_MS_7135 diff --git a/src/mainboard/msi/ms_7135/acpi_tables.c b/src/mainboard/msi/ms_7135/acpi_tables.c new file mode 100644 index 0000000..f5ddec3 --- /dev/null +++ b/src/mainboard/msi/ms_7135/acpi_tables.c @@ -0,0 +1,63 @@ +/* + * ACPI support + * written by Stefan Reinauer stepan@openbios.org + * (C) 2005 Stefan Reinauer + * + * + * Copyright 2005 AMD + * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "../../../northbridge/amd/amdk8/acpi.h" + +/* APIC */ +unsigned long acpi_fill_madt(unsigned long current) +{ + device_t dev; + struct resource *res; + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write NVIDIA CK804 IOAPIC. */ + dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); + ASSERT(dev != NULL); + + res = find_resource(dev, PCI_BASE_ADDRESS_1); + ASSERT(res != NULL); + + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, + CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); + + /* Initialize interrupt mapping if mptable.c didn't. */ +#if (!CONFIG_GENERATE_MP_TABLE) +#error untested config + pci_write_config32(dev, 0x7c, 0x0120d218); + pci_write_config32(dev, 0x80, 0x12008a00); + pci_write_config32(dev, 0x84, 0x0000007d); +#endif + + /* IRQ of timer */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + /* IRQ9 */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* create all subtables for processors */ + /* acpi_create_madt_lapic_nmis returns current, not size. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} diff --git a/src/mainboard/msi/ms_7135/board_info.txt b/src/mainboard/msi/ms_7135/board_info.txt new file mode 100644 index 0000000..3d933cf --- /dev/null +++ b/src/mainboard/msi/ms_7135/board_info.txt @@ -0,0 +1,7 @@ +Board name: MS-7135 (K8N Neo3) +Category: desktop +Board URL: http://no.msi.com/product/mb/K8N-Neo3.html +ROM package: PLCC +ROM protocol: LPC +ROM socketed: variable +Flashrom support: y diff --git a/src/mainboard/msi/ms_7135/cmos.layout b/src/mainboard/msi/ms_7135/cmos.layout new file mode 100644 index 0000000..694554d --- /dev/null +++ b/src/mainboard/msi/ms_7135/cmos.layout @@ -0,0 +1,108 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +448 4 e 10 ram_voltage +452 4 e 11 nf4_voltage +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +#7 3 ROM +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +10 0 2.55 +10 1 2.50 +10 2 2.60 +10 3 2.65 +10 4 2.70 + +11 0 1.50 +11 1 1.55 +11 2 1.60 + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/msi/ms_7135/devicetree.cb b/src/mainboard/msi/ms_7135/devicetree.cb new file mode 100644 index 0000000..e3f0c8c --- /dev/null +++ b/src/mainboard/msi/ms_7135/devicetree.cb @@ -0,0 +1,75 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_754 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + + device domain 0 on # PCI domain + subsystemid 0x1462 0x7135 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627thg # Super I/O + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 4e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5 + device pnp 4e.8 off end # GPIO 2 + device pnp 4e.9 off end # GPIO 3, GPIO 4 + device pnp 4e.a off end # ACPI + device pnp 4e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end # SMbus + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI), N/A + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 (N/A) + device pci c.0 off end # PCI E 2 (N/A) + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/msi/ms_7135/dsdt.asl b/src/mainboard/msi/ms_7135/dsdt.asl new file mode 100644 index 0000000..9410d2f --- /dev/null +++ b/src/mainboard/msi/ms_7135/dsdt.asl @@ -0,0 +1,269 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) +{ + #include "northbridge/amd/amdk8/util.asl" + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) + + Name (PICM, 0x00) + Method (_PIC, 1, Serialized) { + Store (Arg0, PICM) + } + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device (CK804) */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + _SB.GXXX(node, link) + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + +#include "southbridge/nvidia/ck804/acpi/ck804.asl" + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x00, _SB.PCI0.LLAS, 0x00 }, + Package (0x04) { 0x0001FFFF, 0x01, _SB.PCI0.LLAS, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x00, _SB.PCI0.LUOH, 0x00 }, + Package (0x04) { 0x0002FFFF, 0x01, _SB.PCI0.LUEH, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x00, _SB.PCI0.LAUD, 0x00 }, + Package (0x04) { 0x0004FFFF, 0x01, _SB.PCI0.LMOD, 0x00 }, + Package (0x04) { 0x0006FFFF, 0x00, _SB.PCI0.LPA0, 0x00 }, + Package (0x04) { 0x0007FFFF, 0x00, _SB.PCI0.LSA0, 0x00 }, + Package (0x04) { 0x0008FFFF, 0x00, _SB.PCI0.LSA1, 0x00 }, + + Package (0x04) { 0x0009FFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x0009FFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x0009FFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x0009FFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x000AFFFF, 0x00, _SB.PCI0.LEMA, 0x00 }, + + Package (0x04) { 0x000BFFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x000BFFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x000BFFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x000BFFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x000CFFFF, 0x00, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x000CFFFF, 0x01, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x000CFFFF, 0x02, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x000CFFFF, 0x03, _SB.PCI0.LNKD, 0x00 }, + + Package (0x04) { 0x000DFFFF, 0x00, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x000DFFFF, 0x01, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x000DFFFF, 0x02, _SB.PCI0.LNKB, 0x00 }, + Package (0x04) { 0x000DFFFF, 0x03, _SB.PCI0.LNKC, 0x00 }, + + Package (0x04) { 0x000EFFFF, 0x00, _SB.PCI0.LNKC, 0x00 }, + Package (0x04) { 0x000EFFFF, 0x01, _SB.PCI0.LNKD, 0x00 }, + Package (0x04) { 0x000EFFFF, 0x02, _SB.PCI0.LNKA, 0x00 }, + Package (0x04) { 0x000EFFFF, 0x03, _SB.PCI0.LNKB, 0x00 }, + }) + + Device (PCIC) + { + Name (_ADR, 0x00090000) + Name (_UID, 0x00) + Name (_PRT, Package () { + /* AGR slot */ + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + /* 2:00 PCIe x1 */ + Device (PEX1) + { + Name (_ADR, 0x000d0000) + Name (_UID, 0x00) + } + + /* 3:00 PCIe x16 */ + Device (PEX0) + { + Name (_ADR, 0x000e0000) + Name (_UID, 0x00) + } + + Device (LPC) { + Name (_HID, EisaId ("PNP0A05")) + Name (_ADR, 0x00010000) + + OperationRegion (CF44, PCI_Config, 0x44, 0x04) + Field (CF44, ByteAcc, NoLock, Preserve) + { + ETBA, 32, + } + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* Parallel port */ + Device (LP0) + { + Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + FixedIO (0x0378, 0x10) + IRQNoFlags () {7} + }) + Return (TMP) + } + } + + /* Floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + FixedIO (0x03F0, 0x08) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } +#if 0 + Device (HPET) + { + Name (_HID, EisaId ("PNP0103")) + Name (CRS, ResourceTemplate () + { + Memory32Fixed (ReadOnly, + 0x00000000, + 0x00001000, + _Y02) + }) + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + Method (_CRS, 0, NotSerialized) + { + CreateDWordField (CRS, _SB.PCI0.LPC.HPET._Y02._BAS, HPT) + Store (ETBA, HPT) + Return (CRS) + } + + } +#endif + } + } + } +} diff --git a/src/mainboard/msi/ms_7135/get_bus_conf.c b/src/mainboard/msi/ms_7135/get_bus_conf.c new file mode 100644 index 0000000..e364892 --- /dev/null +++ b/src/mainboard/msi/ms_7135/get_bus_conf.c @@ -0,0 +1,107 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +/* Global variables for MB layouts and these will be shared by irqtable, + * mptable and acpi_tables. + */ +/* busnum is default */ +unsigned char bus_ck804[6]; +unsigned apicid_ck804; + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, //no HTIO for ms7135 +}; +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, //ms7135 has only one ht-chain +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned apicid_base; + + device_t dev; + unsigned sbdn; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + for (i = 0; i < 6; i++) { + bus_ck804[i] = 0; + } + + bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* CK804 */ + int dn = -1; + for (i = 1; i < 4; i++) { + switch (i) { + case 1: dn = 9; break; + case 2: dn = 13; break; + case 3: dn = 14; break; + default: dn = -1; break; + } + dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0)); + if (dev) { + bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base + 0; +} diff --git a/src/mainboard/msi/ms_7135/irq_tables.c b/src/mainboard/msi/ms_7135/irq_tables.c new file mode 100644 index 0000000..f3d1c00 --- /dev/null +++ b/src/mainboard/msi/ms_7135/irq_tables.c @@ -0,0 +1,262 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ + +/* This is probably not right, feel free to fix this if you don't want + * to use the mptable. + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_ck804[6]; + + +/** + * Add one line to IRQ table. + */ +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, + uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, + uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +/** + * Create the IRQ routing table. + * Values are derived from getpir generated code. + */ +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum = 0; + int i; + unsigned sbdn; + + /* get_bus_conf() will find out all bus num and apic that share with + * mptable.c and mptable.c + */ + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804[0]; + pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; + + pirq->exclusive_irqs = 0x828; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + +//Slot1 PCIE 16x + write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, + 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); + pirq_info++; + slot_num++; + +//Slot2 PCIE 1x + write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); + pirq_info++; + slot_num++; + +//Slot3 PCIE 1x + write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, + 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); + pirq_info++; + slot_num++; + +//Slot4 PCIE 4x + write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, + 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, + 7, 0); + pirq_info++; + slot_num++; + +//Slot5 - 7 PCI + for (i = 0; i < 3; i++) { + write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, + ((i + 0) % 4) + 1, 0xdeb8, + ((i + 1) % 4) + 1, 0xdeb8, + ((i + 2) % 4) + 1, 0xdeb8, + ((i + 3) % 4) + 1, 0xdeb8, i, 0); + pirq_info++; + slot_num++; + } + +//pci bridge + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); + pirq_info++; + slot_num++; + +//smbus + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + +#if 0 + unsigned char irq[4]; + irq[0] = 0; + irq[1] = 0; + irq[2] = 0; + irq[3] = 0; + + /* Bus, device, slots IRQs for {A,B,C,D}. */ + + irq[0] = 10; /* SMBus */ /* test me */ + pci_assign_irqs(bus_ck804[0], 1, irq); + + irq[0] = 10; /* USB */ + irq[1] = 10; + pci_assign_irqs(bus_ck804[0], 2, irq); + + irq[0] = 10; /* AC97 */ + irq[1] = 0; + pci_assign_irqs(bus_ck804[0], 4, irq); + + irq[0] = 11; /* SATA */ + pci_assign_irqs(bus_ck804[0], 7, irq); + + irq[0] = 5; /* SATA */ + pci_assign_irqs(bus_ck804[0], 8, irq); + + irq[0] = 10; /* Ethernet */ + pci_assign_irqs(bus_ck804[0], 10, irq); + + + /* physical slots */ + + irq[0] = 5; /* PCI E1 - x1 */ + pci_assign_irqs(bus_ck804[2], 0, irq); + + irq[0] = 11; /* PCI E2 - x16 */ + pci_assign_irqs(bus_ck804[3], 0, irq); + + /* AGP-on-PCI "AGR" ignored */ + + irq[0] = 10; /* PCI1 */ + irq[1] = 11; + irq[2] = 5; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 7, irq); + + irq[0] = 11; /* PCI2 */ + irq[1] = 10; + irq[2] = 5; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 8, irq); + + irq[0] = 5; /* PCI3 */ + irq[1] = 10; + irq[2] = 11; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 9, irq); +#endif + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/msi/ms_7135/mptable.c b/src/mainboard/msi/ms_7135/mptable.c new file mode 100644 index 0000000..b43a516 --- /dev/null +++ b/src/mainboard/msi/ms_7135/mptable.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_ck804[6]; +extern unsigned apicid_ck804; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + unsigned sbdn; + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + mptable_write_buses(mc, NULL, &bus_isa); + +/* I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + u32 dword; + + dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804, 0x11, + res->base); + } + + /* Initialize interrupt mapping */ + + /* copied from stock bios */ + /*0x01800500,0x1800d509,0x00520d08*/ + + dword = 0x08d0d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x8d001509; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00010271; + pci_write_config32(dev, 0x84, dword); + + } + } + + /* Now, assemble the table. */ + mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); + +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \ + bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin)) + +#if 0 + // Onboard ck804 smbus + PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */ + +#endif + // Onboard ck804 USB + PCI_INT(0, sbdn+2, 0, 23); + PCI_INT(0, sbdn+2, 1, 23); + + // Onboard ck804 AC-97 + PCI_INT(0, sbdn+4, 0, 23); + + // Onboard ck804 SATA 0 + PCI_INT(0, sbdn+7, 0, 20); + + // Onboard ck804 SATA 1 + PCI_INT(0, sbdn+8, 0, 21); + + // Onboard ck804 NIC + PCI_INT(0, sbdn+10, 0, 22); + + + /* "AGR" slot */ + PCI_INT(1, 0, 0, 16); + PCI_INT(1, 0, 1, 17); + + /* legacy PCI */ + PCI_INT(1, 7, 0, 17); + PCI_INT(1, 7, 1, 18); + PCI_INT(1, 7, 2, 19); + PCI_INT(1, 7, 3, 16); + + PCI_INT(1, 8, 0, 18); + PCI_INT(1, 8, 1, 19); + PCI_INT(1, 8, 2, 16); + PCI_INT(1, 8, 3, 17); + + PCI_INT(1, 9, 0, 19); + PCI_INT(1, 9, 1, 16); + PCI_INT(1, 9, 2, 17); + PCI_INT(1, 9, 3, 18); + + + /* PCI-E x1 port */ + PCI_INT(2, 0, 0, 19); + /* XXX guesses */ + PCI_INT(2, 0, 1, 16); + PCI_INT(2, 0, 2, 17); + PCI_INT(2, 0, 3, 18); + + /* PCI-E x16 port */ /* XXX fix me ? */ + PCI_INT(3, 0, 0, 18); + /* XXX guesses */ + PCI_INT(3, 0, 1, 19); + PCI_INT(3, 0, 2, 16); + PCI_INT(3, 0, 3, 17); + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_ck804[0]); + + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms_7135/romstage.c b/src/mainboard/msi/ms_7135/romstage.c new file mode 100644 index 0000000..15c02f5 --- /dev/null +++ b/src/mainboard/msi/ms_7135/romstage.c @@ -0,0 +1,172 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2007 Philipp Degler pdegler@rumms.uni-mannheim.de + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch jakllsch@kollasch.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627thg/w83627thg.h> +#include <cpu/amd/model_fxx_rev.h> +#include <console/console.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/early_smbus.h" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "cpu/amd/dualcore/dualcore.c" +#include <spd.h> + +#if CONFIG_HAVE_OPTION_TABLE +#include "option_table.h" +#endif + +#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "lib/generic_sdram.c" +#include "southbridge/nvidia/ck804/early_setup_ss.h" +#include "southbridge/nvidia/ck804/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void ms7135_set_ram_voltage(void) +{ + u8 b; + b = read_option(ram_voltage, 0); + if (b > 4) /* default if above 2.70v */ + b = 0; + printk(BIOS_INFO, "setting RAM voltage %08x\n", b); + ck804_smbus_write_byte(1, 0x2f, 0x00, b); +} + +static void ms7135_set_nf4_voltage(void) +{ + u8 b; + b = read_option(nf4_voltage, 0); + if (b > 2) /* default if above 1.60v */ + b = 0; + b |= 0x10; + printk(BIOS_INFO, "setting NF4 voltage %08x\n", b); + ck804_smbus_write_byte(1, 0x2f, 0x02, b); +} + +static void sio_setup(void) +{ + u32 dword; + u8 byte; + + /* Subject decoding */ + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); + + /* LPC Positive Decode 0 */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); + /* Serial 0, Serial 1 */ + dword |= (1 << 0) | (1 << 1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { + DIMM0, DIMM1, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + }; + + int needs_reset; + unsigned bsp_apicid = 0, nodes; + struct mem_controller ctrl[8]; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + needs_reset = setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + needs_reset |= ht_setup_chains_x(); + needs_reset |= ck804_early_setup_x(); + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); + + ms7135_set_nf4_voltage(); + ms7135_set_ram_voltage(); + +#if CONFIG_DEBUG_SMBUS + dump_spd_registers(&ctrl[0]); + dump_smbus_registers(); +#endif + + sdram_initialize(nodes, ctrl); + + post_cache_as_ram(); +} diff --git a/src/mainboard/msi/ms_7260/Kconfig b/src/mainboard/msi/ms_7260/Kconfig new file mode 100644 index 0000000..35a249e --- /dev/null +++ b/src/mainboard/msi/ms_7260/Kconfig @@ -0,0 +1,78 @@ +if BOARD_MSI_MS_7260 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_AM2 + select DIMM_DDR2 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627EHG + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + select SET_FIDVID + +config MAINBOARD_DIR + string + default msi/ms_7260 + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 2 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "MS-7260" + +config PCI_64BIT_PREF_MEM + bool + default n + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config IRQ_SLOT_COUNT + int + default 11 + +config MCP55_PCI_E_X_0 + int + default 0 + +endif # BOARD_MSI_MS_7260 diff --git a/src/mainboard/msi/ms_7260/board_info.txt b/src/mainboard/msi/ms_7260/board_info.txt new file mode 100644 index 0000000..431899a --- /dev/null +++ b/src/mainboard/msi/ms_7260/board_info.txt @@ -0,0 +1,6 @@ +Board name: MS-7260 (K9N Neo) +Category: desktop +Board URL: http://no.msi.com/product/mb/K9N-Neo--PCB-1-0-.html +ROM package: PLCC +ROM socketed: y +Flashrom support: coreboot-only diff --git a/src/mainboard/msi/ms_7260/cmos.layout b/src/mainboard/msi/ms_7260/cmos.layout new file mode 100644 index 0000000..dd56268 --- /dev/null +++ b/src/mainboard/msi/ms_7260/cmos.layout @@ -0,0 +1,118 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# TODO: Check and fix up the values as needed. + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/msi/ms_7260/devicetree.cb b/src/mainboard/msi/ms_7260/devicetree.cb new file mode 100644 index 0000000..717ad00 --- /dev/null +++ b/src/mainboard/msi/ms_7260/devicetree.cb @@ -0,0 +1,143 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_AM2 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x7260 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 4e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # Com2 / IrDA + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard IRQ + irq 0x72 = 12 # PS/2 mouse IRQ + end + device pnp 4e.106 off # Serial flash interface (SFI) + # io 0x62 = 0x100 + end + device pnp 4e.007 off # GPIO 1 + end + device pnp 4e.107 off # Game port + # io 0x60 = 0x220 # Datasheet: 0x201 + end + device pnp 4e.207 off # MIDI + # io 0x62 = 0x300 # Datasheet: 0x330 + # irq 0x70 = 9 + end + device pnp 4e.307 off # GPIO 6 + end + device pnp 4e.8 off # WDTO#, PLED + end + device pnp 4e.009 off # GPIO 2 + end + device pnp 4e.109 off # GPIO 3 + end + device pnp 4e.209 off # GPIO 4 + end + device pnp 4e.309 off # GPIO 5 + end + device pnp 4e.a off # ACPI + end + device pnp 4e.b on # Hardware monitor + io 0x60 = 0xa10 + # TODO: IRQ? + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + end + # TODO: Check if the stuff below is correct / needed. + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 off end # SATA 2 (N/A on this board) + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A on this board) + device pci a.0 off end # PCI E 5 (N/A on this board?) + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # TODO: Check the two lines below. + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/msi/ms_7260/get_bus_conf.c b/src/mainboard/msi/ms_7260/get_bus_conf.c new file mode 100644 index 0000000..34d3834 --- /dev/null +++ b/src/mainboard/msi/ms_7260/get_bus_conf.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ +// busnum is default. +unsigned char bus_mcp55[8]; // 1 +unsigned apicid_mcp55; + +unsigned pci1234x[] = { + /* Here you only need to set value in pci1234 for HT-IO that could + * be installed or not. You may need to preset pci1234 for HTIO board, + * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. + */ + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { + /* HT Chain device num, actually it is unit id base of every ht + * device in chain, assume every chain only have 4 ht device at most. + */ + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned int apicid_base, sbdn; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* Do it only once. */ + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ + sbdn = sysconf.sbdn; + + for (i = 0; i < 8; i++) + bus_mcp55[i] = 0; + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk + (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); + + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + +/* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; +} diff --git a/src/mainboard/msi/ms_7260/irq_tables.c b/src/mainboard/msi/ms_7260/irq_tables.c new file mode 100644 index 0000000..15ac432 --- /dev/null +++ b/src/mainboard/msi/ms_7260/irq_tables.c @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, + uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, + uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_mcp55[8]; // 1 + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned int slot_num, sbdn; + uint8_t *v; + uint8_t sum = 0; + int i; + + /* Will find out all bus num and apic that share with mptable.c + * and mptable.c and acpi_tables.c. + */ + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 and 0x100000. */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + pirq->rtr_bus = bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; + pirq->exclusive_irqs = 0; + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */ + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* PCI bridge (00:06.0) */ + write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, + 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) + pirq->checksum = sum; + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/msi/ms_7260/mainboard.c b/src/mainboard/msi/ms_7260/mainboard.c new file mode 100644 index 0000000..492693a --- /dev/null +++ b/src/mainboard/msi/ms_7260/mainboard.c @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> + +#if 0 + + +static void mainboard_enable(device_t dev) +{ +} +#endif + +struct chip_operations mainboard_ops = { + // .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/msi/ms_7260/mptable.c b/src/mainboard/msi/ms_7260/mptable.c new file mode 100644 index 0000000..ea003a8 --- /dev/null +++ b/src/mainboard/msi/ms_7260/mptable.c @@ -0,0 +1,110 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_mcp55[8]; // 1 +extern unsigned apicid_mcp55; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned int sbdn; + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd0001202; + pci_write_config32(dev, 0x84, dword); + } + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); + + /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22 + + for (j = 7; j >= 2; j--) { + if (!bus_mcp55[j]) + continue; + for (i = 0; i < 4; i++) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); + } + + for (j = 0; j < 2; j++) { + for (i = 0; i < 4; i++) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4); + } + + /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, bus_isa); + + /* There is no extension information... */ + + /* Compute the checksums. */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms_7260/resourcemap.c b/src/mainboard/msi/ms_7260/resourcemap.c new file mode 100644 index 0000000..6a9329a --- /dev/null +++ b/src/mainboard/msi/ms_7260/resourcemap.c @@ -0,0 +1,283 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/msi/ms_7260/romstage.c b/src/mainboard/msi/ms_7260/romstage.c new file mode 100644 index 0000000..fd8fbfb --- /dev/null +++ b/src/mainboard/msi/ms_7260/romstage.c @@ -0,0 +1,202 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <lib.h> +#include <spd.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) + +static void memreset(int controllers, const struct mem_controller *ctrl) {} +static inline void activate_spd_rom(const struct mem_controller *ctrl) {} + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); + dword |= (1 << 0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); + dword |= (1 << 16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* FIXME: This should be part of the Super I/O code/config. */ + pnp_enter_ext_func_mode(SERIAL_DEV); + /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ + pnp_write_config(SERIAL_DEV, 0x24, 0); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + pnp_exit_ext_func_mode(SERIAL_DEV); + + setup_mb_resource_map(); + console_init(); + report_bist_failure(bist); /* Halt upon BIST failure. */ + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + print_debug("bsp_apicid="); + print_debug_hex8(bsp_apicid); + print_debug("\n"); + + /* In BSP so could hold all AP until sysinfo is in RAM. */ + set_sysinfo_in_ram(0); + + setup_coherent_ht_domain(); /* Routing table and start other core0. */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched + * becase optimize_link_coherent_ht is moved out from + * setup_coherent_ht_domain, so here need to make sure last core0 is + * started, esp for two way system (there may be APIC ID conflicts in + * that case). + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* Set up chains and store link pair for optimization later. */ + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + +#if CONFIG_SET_FIDVID + { + msr_t msr = rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\n"); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + { + msr_t msr = rdmsr(0xc0010042); + print_debug("end msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\n"); + } +#endif + + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */ + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl in sysinfo now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + /* All AP stopped? */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + /* bsp switch stack to RAM and copy sysinfo RAM now. */ + post_cache_as_ram(); +} diff --git a/src/mainboard/msi/ms_9185/Kconfig b/src/mainboard/msi/ms_9185/Kconfig new file mode 100644 index 0000000..2562fe6 --- /dev/null +++ b/src/mainboard/msi/ms_9185/Kconfig @@ -0,0 +1,65 @@ +if BOARD_MSI_MS_9185 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_BROADCOM_BCM5780 + select SOUTHBRIDGE_BROADCOM_BCM5785 + select SUPERIO_NSC_PC87417 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_512 + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default msi/ms_9185 + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x04000 + +config APIC_ID_OFFSET + hex + default 0x8 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "MS-9185" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x6 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_MSI_MS_9185 diff --git a/src/mainboard/msi/ms_9185/board_info.txt b/src/mainboard/msi/ms_9185/board_info.txt new file mode 100644 index 0000000..8ffecdb --- /dev/null +++ b/src/mainboard/msi/ms_9185/board_info.txt @@ -0,0 +1,3 @@ +Board name: K9SD Master-S2R (MS-9185) +Category: server +Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_918... diff --git a/src/mainboard/msi/ms_9185/cmos.layout b/src/mainboard/msi/ms_9185/cmos.layout new file mode 100644 index 0000000..c5e27fe --- /dev/null +++ b/src/mainboard/msi/ms_9185/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/msi/ms_9185/devicetree.cb b/src/mainboard/msi/ms_9185/devicetree.cb new file mode 100644 index 0000000..013bba3 --- /dev/null +++ b/src/mainboard/msi/ms_9185/devicetree.cb @@ -0,0 +1,87 @@ +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_F + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x2b80 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # northbridge + # devices on link 0 + chip southbridge/broadcom/bcm5780 # HT2000 + device pci 0.0 on end # PXB 1 0x0130 + device pci 1.0 on # PXB 2 0x0130 + device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 + device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 + end + device pci 2.0 on end # PCI E 1 #0x0132 + device pci 3.0 on end # PCI E 2 + device pci 4.0 on end # PCI E 3 + device pci 5.0 on end # PCI E 4 + end + chip southbridge/broadcom/bcm5785 # HT1000 + device pci 0.0 on # HT PXB 0x0036 + device pci d.0 on end # PPBX 0x0104 + device pci e.0 on end # SATA 0x024a + device pci e.1 on end # SATA 0x024a bx_a001 + device pci e.2 on end # SATA 0x024a bx_a001 + device pci e.3 on end # SATA 0x024a bx_a001 + end + device pci 1.0 on # Legacy pci main 0x0205 + end + device pci 1.1 on end # IDE 0x0214 + device pci 1.2 on # LPC 0x0234 + chip superio/nsc/pc87417 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.f off end # XBUS + device pnp 2e.10 on #RTC + io 0x60 = 0x70 + io 0x62 = 0x72 + end + end + end + device pci 1.3 on end # WDTimer 0x0238 + device pci 1.4 on end # XIOAPIC0 0x0235 + device pci 1.5 on end # XIOAPIC1 + device pci 1.6 on end # XIOAPIC2 + device pci 2.0 on end # USB 0x0223 + device pci 2.1 on end # USB + device pci 2.2 on end # USB + device pci 3.0 on end # it is in bcm5785_0 bus + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # amdk8 + end #domain +end + + diff --git a/src/mainboard/msi/ms_9185/get_bus_conf.c b/src/mainboard/msi/ms_9185/get_bus_conf.c new file mode 100644 index 0000000..3a70d83 --- /dev/null +++ b/src/mainboard/msi/ms_9185/get_bus_conf.c @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + int i; + struct mb_sysconf_t *m; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + + m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_bcm5780[0] = m->bus_bcm5785_0; + + /* bcm5785 */ + dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); + if (dev) { + m->bus_bcm5785_1_1 = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_bcm5785_0, sysconf.sbdn); + } + + /* bcm5780 */ + for (i = 1; i < 7; i++) { + dev = + dev_find_slot(m->bus_bcm5780[0], + PCI_DEVFN(m->sbdn2 + i - 1, 0)); + if (dev) { + m->bus_bcm5780[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_bcm5780[0], m->sbdn2 + i - 1); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + for (i = 0; i < 3; i++) + m->apicid_bcm5785[i] = apicid_base + i; +} diff --git a/src/mainboard/msi/ms_9185/irq_tables.c b/src/mainboard/msi/ms_9185/irq_tables.c new file mode 100644 index 0000000..963f5d2 --- /dev/null +++ b/src/mainboard/msi/ms_9185/irq_tables.c @@ -0,0 +1,126 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +#include "mb_sysconf.h" + + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + struct mb_sysconf_t *m; + + get_bus_conf(); + + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_bcm5785_0; + pirq->rtr_devfn = (sysconf.sbdn<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1166; + pirq->rtr_device = 0x0036; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/msi/ms_9185/mb_sysconf.h b/src/mainboard/msi/ms_9185/mb_sysconf.h new file mode 100644 index 0000000..4b27fc3 --- /dev/null +++ b/src/mainboard/msi/ms_9185/mb_sysconf.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_bcm5780[7]; + unsigned char bus_bcm5785_0; + unsigned char bus_bcm5785_1; + unsigned char bus_bcm5785_1_1; + unsigned apicid_bcm5785[3]; + + unsigned sbdn2; +}; + +#endif diff --git a/src/mainboard/msi/ms_9185/mptable.c b/src/mainboard/msi/ms_9185/mptable.c new file mode 100644 index 0000000..b30ab73 --- /dev/null +++ b/src/mainboard/msi/ms_9185/mptable.c @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2001 Eric W.Biedermanebiderman@lnxi.com + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/io.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + + int i, bus_isa; + struct mb_sysconf_t *m; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev = 0; + struct resource *res; + for(i=0; i<3; i++) { + dev = dev_find_device(0x1166, 0x0235, dev); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, res->base); + } + } + } + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); + +//IDE + outb(0x02, 0xc00); outb(0x0e, 0xc01); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE + +//SATA + outb(0x07, 0xc00); outb(0x0f, 0xc01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1, (0x0e<<2)|0, m->apicid_bcm5785[0], 0xf); + +//USB + outb(0x01, 0xc00); outb(0x0a, 0xc01); + for(i=0;i<3;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // + } + + + + /* enable int */ + /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ + { + device_t dev; + dev = dev_find_device(0x1166, 0x0205, 0); + if(dev) { + uint32_t dword; + dword = pci_read_config32(dev, 0x6c); + dword |= (1<<4); // enable interrupts + pci_write_config32(dev, 0x6c, dword); + } + } + +//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 + // AIC 8130 Galileo Technology... + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_1_1, (6<<2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // + } + + +//pci slot (on bcm5785) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (5<<2)|i, m->apicid_bcm5785[1], 8+i%4); // + } + + +//onboard ati + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5785_0, (4<<2)|0, m->apicid_bcm5785[1], 0x1); + +//PCI-X on bcm5780 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[1], (4<<2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // + } + +//onboard Broadcom + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[2], (4<<2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // + } + + +// First PCI-E x8 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[5], (0<<2)|i, m->apicid_bcm5785[1], 0xe); // + } + + +// Second PCI-E x8 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[3], (0<<2)|i, m->apicid_bcm5785[1], 0xc); // + } + +// Third PCI-E x1 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_bcm5780[4], (0<<2)|i, m->apicid_bcm5785[1], 0xd); // + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms_9185/resourcemap.c b/src/mainboard/msi/ms_9185/resourcemap.c new file mode 100644 index 0000000..7d051bf --- /dev/null +++ b/src/mainboard/msi/ms_9185/resourcemap.c @@ -0,0 +1,290 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Stefan Reinauer stepan@coresystems.de + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ms9185 needs a different resource map + * + */ + +static void setup_ms9185_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/msi/ms_9185/romstage.c b/src/mainboard/msi/ms_9185/romstage.c new file mode 100644 index 0000000..aabc826 --- /dev/null +++ b/src/mainboard/msi/ms_9185/romstage.c @@ -0,0 +1,211 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 Tyan + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for Tyan and AMD. + * + * Copyright (C) 2006 MSI + * Written by bxshi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/broadcom/bcm5785/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <reset.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/nsc/pc87417/early_serial.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/broadcom/bcm5785/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) +#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_SWITCH1 0x70 +#define SMBUS_SWITCH2 0x72 + unsigned device = (ctrl->channel0[0]) >> 8; + smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include <spd.h> +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +#define RC0 (0x10<<8) +#define RC1 (0x01<<8) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + //first node + RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, + RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, + //second node + RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, + RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, + }; + + struct sys_info *sysinfo = &sysinfo_car; + + int needs_reset; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + bcm5785_enable_lpc(); + //enable RTC + pc87417_enable_dev(RTC_DEV); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + setup_ms9185_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); + + setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); +//bx_a010- wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + + bcm5785_early_setup(); + +#if 0 + //it your CPU min fid is 1G, you can change HT to 1G and FID to max one time. + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); +#endif + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); + } +#endif + +#if 1 + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } +#endif + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + +#if 0 + int i; + for(i=0;i<2;i++) { + activate_spd_rom(sysinfo->ctrl+i); + dump_smbus_registers(); + } +#endif + + //do we need apci timer, tsc...., only debug need it for better output + /* all ap stopped? */ +// init_timer(); // Need to use TMICT to synconize FID/VID + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + +#if 0 + print_pci_devices(); +#endif + +#if 0 +// dump_pci_devices(); + dump_pci_device_index_wait(PCI_DEV(0, 0x18, 2), 0x98); + dump_pci_device_index_wait(PCI_DEV(0, 0x19, 2), 0x98); +#endif + + post_cache_as_ram(); +} diff --git a/src/mainboard/msi/ms_9282/Kconfig b/src/mainboard/msi/ms_9282/Kconfig new file mode 100644 index 0000000..22de087 --- /dev/null +++ b/src/mainboard/msi/ms_9282/Kconfig @@ -0,0 +1,68 @@ +if BOARD_MSI_MS_9282 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_WINBOND_W83627EHG + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select DRIVERS_I2C_ADM1027 + select DRIVERS_I2C_I2CMUX2 + +config MAINBOARD_DIR + string + default msi/ms_9282 + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x04000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "MS-9282" + +config PCI_64BIT_PREF_MEM + bool + default n + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_MSI_MS_9282 diff --git a/src/mainboard/msi/ms_9282/board_info.txt b/src/mainboard/msi/ms_9282/board_info.txt new file mode 100644 index 0000000..2f8e688 --- /dev/null +++ b/src/mainboard/msi/ms_9282/board_info.txt @@ -0,0 +1,3 @@ +Board name: K9SD Master (MS-9282) +Category: server +Board URL: http://cweb.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=63... diff --git a/src/mainboard/msi/ms_9282/cmos.layout b/src/mainboard/msi/ms_9282/cmos.layout new file mode 100644 index 0000000..f50c53e --- /dev/null +++ b/src/mainboard/msi/ms_9282/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/msi/ms_9282/devicetree.cb b/src/mainboard/msi/ms_9282/devicetree.cb new file mode 100644 index 0000000..747347e --- /dev/null +++ b/src/mainboard/msi/ms_9282/devicetree.cb @@ -0,0 +1,182 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x9282 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 off # MIDI + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off end # WDTO#, PLED + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux + device i2c 70 on # 0 pca9554 1 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 57 on end + end + end + device i2c 70 on # 0 pca9554 2 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 57 on end + end + end + end + end + device pci 1.1 on # SM 1 + chip drivers/i2c/i2cmux2 # pca9554 SMBus mux + device i2c 72 on # PCA9554 channel 1 + chip drivers/i2c/adm1027 # HWM ADT7476 1 + device i2c 2e on end + end + end + device i2c 72 on # PCA9545 channel 2 + chip drivers/i2c/adm1027 # HWM ADT7463 + device i2c 2e on end + end + end + device i2c 72 on end # PCA9545 channel 3 + device i2c 72 on # PCA9545 channel 4 + chip drivers/i2c/adm1027 # HWM ADT7476 2 + device i2c 2e on end + end + end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # P2P + device pci 4.0 on end + end + device pci 7.0 on end # reserve + device pci 8.0 on end # MAC0 + device pci 9.0 on end # MAC1 + device pci a.0 on + device pci 0.0 on + device pci 4.0 on end # PCI-E LAN1 + device pci 4.1 on end # PCI-E LAN2 + end + end # 0x376 + device pci b.0 on end # PCI E 0x374 + device pci c.0 on end + device pci d.0 on # SAS + device pci 0.0 on end + end # PCI E 1 0x378 + device pci e.0 on end # PCI E 0 0x375 + device pci f.0 on end # PCI E 0x377, PCI-E slot + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/msi/ms_9282/get_bus_conf.c b/src/mainboard/msi/ms_9282/get_bus_conf.c new file mode 100644 index 0000000..195ddc4 --- /dev/null +++ b/src/mainboard/msi/ms_9282/get_bus_conf.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sysconf.sbdn + 0x06); + } + + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(m->bus_mcp55[0], + PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); + if (dev) { + m->bus_mcp55[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_mcp55 = apicid_base + 0; + +} diff --git a/src/mainboard/msi/ms_9282/irq_tables.c b/src/mainboard/msi/ms_9282/irq_tables.c new file mode 100644 index 0000000..b41ca95 --- /dev/null +++ b/src/mainboard/msi/ms_9282/irq_tables.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/msi/ms_9282/mainboard.c b/src/mainboard/msi/ms_9282/mainboard.c new file mode 100644 index 0000000..c7e459a --- /dev/null +++ b/src/mainboard/msi/ms_9282/mainboard.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/msi/ms_9282/mb_sysconf.h b/src/mainboard/msi/ms_9282/mb_sysconf.h new file mode 100644 index 0000000..4b15168 --- /dev/null +++ b/src/mainboard/msi/ms_9282/mb_sysconf.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H + +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; +}; + +#endif diff --git a/src/mainboard/msi/ms_9282/mptable.c b/src/mainboard/msi/ms_9282/mptable.c new file mode 100644 index 0000000..1764cf3 --- /dev/null +++ b/src/mainboard/msi/ms_9282/mptable.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00002d2; + pci_write_config32(dev, 0x84, dword); + + } + + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); + +//SMBUS + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + +//USB1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + +//USB2.0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + +//SATA1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + +//SATA2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + +//SATA3 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + +//NIC1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 +//NIC2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms_9282/resourcemap.c b/src/mainboard/msi/ms_9282/resourcemap.c new file mode 100644 index 0000000..76b7dc8 --- /dev/null +++ b/src/mainboard/msi/ms_9282/resourcemap.c @@ -0,0 +1,298 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Stefan Reinauer stepan@coresystems.de + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@gmail.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * MSI ms9282 needs a different resource map + * + */ + +static void setup_ms9282_resource_map(void) +{ + static const unsigned int register_values[] = { +#if 1 + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, +#endif +#if 1 + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, +#endif +#if 1 + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, +#endif + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +#if 1 +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, +#endif + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/msi/ms_9282/romstage.c b/src/mainboard/msi/ms_9282/romstage.c new file mode 100644 index 0000000..9a6e21f --- /dev/null +++ b/src/mainboard/msi/ms_9282/romstage.c @@ -0,0 +1,170 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * Copyright (C) 2006 MSI + * Written by Bingxun Shi bingxunshi@gmail.com for MSI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include "cpu/x86/bist.h" +#include <spd.h> +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include <device/pci_ids.h> +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_SWITCH1 0x70 +#define SMBUS_SWITCH2 0x72 + unsigned device=(ctrl->channel0[0])>>8; + smbus_send_byte(SMBUS_SWITCH1, device); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" + +//set GPIO to input mode +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +// Disabled until it's actually used: +// #include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); +} + +//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. +#define RC0 (2<<8) +#define RC1 (1<<8) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, + RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, + // node 1 + RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, + RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, + }; + + unsigned bsp_apicid = 0; + int needs_reset; + struct sys_info *sysinfo = &sysinfo_car; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) { + //init_cpus(cpu_init_detectedx); + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_ms9282_resource_map(); + + setup_coherent_ht_domain(); + + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); + //wait_all_other_cores_started(bsp_apicid); +#endif + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + //It's the time to set ctrl now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); +} diff --git a/src/mainboard/msi/ms_9652/Kconfig b/src/mainboard/msi/ms_9652/Kconfig new file mode 100644 index 0000000..a0a9231 --- /dev/null +++ b/src/mainboard/msi/ms_9652/Kconfig @@ -0,0 +1,116 @@ +if BOARD_MSI_MS_9652 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F_1207 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627EHG + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select BOARD_ROMSIZE_KB_512 + select ENABLE_APIC_EXT_ID + select AMDMCT + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select QRANK_DIMM_SUPPORT + select LIFT_BSP_APIC_ID + select IOAPIC + select SMP + +config MAINBOARD_DIR + string + default msi/ms_9652 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + +# Define to 0 because the IRQ slot count is +# determined dynamically for this board. +config IRQ_SLOT_COUNT + int + default 0 + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HEAP_SIZE + hex + default 0x20000 + +config USE_OPTION_TABLE + bool + default n + +config MAINBOARD_PART_NUMBER + string + default "MS-9652" + +config RAMBASE + hex + default 0x200000 + +config DEFAULT_CONSOLE_LOGLEVEL + int + default 9 + +config MAINBOARD_POWER_ON_AFTER_POWER_FAIL + bool + default y + +config USBDEBUG + bool + default n + +config HT_CHAIN_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x00 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config VAR_MTRR_HOLE + bool + default n + +config APIC_ID_OFFSET + hex + default 0x00 + +config RAMTOP + hex + default 0x1000000 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_01000096.h" + +config HT3_SUPPORT + bool + default y + +config MCP55_PCI_E_X_0 + int + default 1 + +endif # BOARD_MSI_MS_9652 diff --git a/src/mainboard/msi/ms_9652/acpi_tables.c b/src/mainboard/msi/ms_9652/acpi_tables.c new file mode 100644 index 0000000..148ac1a --- /dev/null +++ b/src/mainboard/msi/ms_9652/acpi_tables.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci_ids.h> +//#include "northbridge/amd/amdfam10/amdfam10_acpi.h" +#include <cpu/amd/powernow.h> +#include <device/pci.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + struct mb_sysconf_t *m; + //extern unsigned char bus_mcp55[8]; + //extern unsigned apicid_mcp55; + + unsigned sbdn; + struct resource *res; + device_t dev; + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + m->apicid_mcp55, res->base, 0); + } + } + + /* Write NB IOAPIC. */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x12,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + m->apicid_mcp55++, res->base, gsi_base); + } + } + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) +{ + //k8acpi_write_vars(); + //amd_generate_powernow(0, 0, 0); + //return (unsigned long) (acpigen_get_current()); + return 0; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_srat_t *srat; + acpi_rsdt_t *rsdt; + acpi_mcfg_t *mcfg; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_slit_t *slit; + acpi_header_t *ssdt; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16 byte. */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT table. */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* Clear all table memory. */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* We explicitly add these tables later on: */ + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + + /* we should align FACS to 64B as per ACPI specs */ + current = ALIGN(current, 64); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + dsdt = (acpi_header_t *) current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + dsdt->checksum = 0; /* Don't trust iasl to get this right. */ + dsdt->checksum = acpi_checksum((u8 *)dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + printk(BIOS_DEBUG, "ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdp, hpet); + + /* If we want to use HPET timers Linux wants an MADT. */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + acpi_add_table(rsdp, mcfg); + + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + /* SLIT */ + printk(BIOS_DEBUG, "ACPI: * SLIT\n"); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current+=slit->header.length; + acpi_add_table(rsdp, slit); + + /* SSDT */ + printk(BIOS_DEBUG, "ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR); + current += ssdt->length; + acpi_add_table(rsdp, ssdt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/msi/ms_9652/board_info.txt b/src/mainboard/msi/ms_9652/board_info.txt new file mode 100644 index 0000000..31cf750 --- /dev/null +++ b/src/mainboard/msi/ms_9652/board_info.txt @@ -0,0 +1 @@ +Category: desktop diff --git a/src/mainboard/msi/ms_9652/cmos.layout b/src/mainboard/msi/ms_9652/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/msi/ms_9652/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/msi/ms_9652/devicetree.cb b/src/mainboard/msi/ms_9652/devicetree.cb new file mode 100644 index 0000000..a6d5206 --- /dev/null +++ b/src/mainboard/msi/ms_9652/devicetree.cb @@ -0,0 +1,169 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## Copyright (C) 2010 Raptor Engineering +## Written by Timothy Pearson tpearson@raptorengineeringinc.com for Raptor Engineering. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/amd/amdfam10/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x9652 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on # Link 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 on # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 on # MIDI + io 0x62 = 0x330 + irq 0x70 = 0xa + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + # chip drivers/generic/generic # MAC EEPROM + # device i2c 51 on end + # end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # HT 1.0 + device pci 18.0 on end # HT 2.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + end + end +end diff --git a/src/mainboard/msi/ms_9652/dsdt.asl b/src/mainboard/msi/ms_9652/dsdt.asl new file mode 100644 index 0000000..8717f19 --- /dev/null +++ b/src/mainboard/msi/ms_9652/dsdt.asl @@ -0,0 +1,302 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007, 2008 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 Harald Gutmann harald.gutmann@gmx.net + * + * ISA portions taken from QEMU acpi-dsdt.dsl. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + #include <northbridge/amd/amdk8/util.asl> + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + External (BUSN) + External (MMIO) + External (PCIO) + External (SBLK) + External (TOM1) + External (HCLK) + External (SBDN) + External (HCDN) + + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () + { + IO (Decode16, + 0x0CF8, // Address Range Minimum + 0x0CF8, // Address Range Maximum + 0x01, // Address Alignment + 0x08, // Address Length + ) + WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, // Address Space Granularity + 0x0000, // Address Range Minimum + 0x0CF7, // Address Range Maximum + 0x0000, // Address Translation Offset + 0x0CF8, // Address Length + ,, , TypeStatic) + }) + /* Methods bellow use SSDT to get actual MMIO regs + The IO ports are from 0xd00, optionally an VGA, + otherwise the info from MMIO is used. + */ + Concatenate (_SB.GMEM (0x00, _SB.PCI0.SBLK), BUF0, Local1) + Concatenate (_SB.GIOR (0x00, _SB.PCI0.SBLK), Local1, Local2) + Concatenate (_SB.GWBN (0x00, _SB.PCI0.SBLK), Local2, Local3) + Return (Local3) + } + + /* PCI Routing Table */ + Name (_PRT, Package () { + Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x0A }, /* 0x1 - 00:01.1 - IRQ 10 - SMBus */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x16 }, /* 0x2 - 00:02.0 - IRQ 22 - USB */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x17 }, /* 0x2 - 00:01.1 - IRQ 23 - USB */ + Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x15 }, /* 0x4 - 00:04.0 - IRQ 21 - IDE */ + Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x14 }, /* 0x5 - 00:05.0 - IRQ 20 - SATA */ + Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x15 }, /* 0x5 - 00:05.1 - IRQ 21 - SATA */ + Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x16 }, /* 0x5 - 00:05.2 - IRQ 22 - SATA */ + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x17 }, /* 0x6 - 00:06.1 - IRQ 23 - HD Audio */ + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x14 }, /* 0x8 - 00:08.0 - IRQ 20 - GBit Ethernet */ + }) + + Device (PEBF) /* PCI-E Bridge F */ + { + Name (_ADR, 0x000F0000) + Name (_UID, 0x00) + Name (_BBN, 0x07) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBE) /* PCI-E Bridge E */ + { + Name (_ADR, 0x000E0000) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PEBD) /* PCI-E Bridge D */ + { + Name (_ADR, 0x000D0000) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x12 }, + }) + } + + Device (PEBC) /* PCI-E Bridge C */ + { + Name (_ADR, 0x000C0000) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 }, + }) + } + + Device (PEBB) /* PCI-E Bridge B */ + { + Name (_ADR, 0x000B0000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x10 }, + }) + } + + Device (PEBA) /* PCI-E Bridge A */ + { + Name (_ADR, 0x000A0000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x11 }, + }) + } + + Device (PCID) /* PCI Device */ + { + Name (_ADR, 0x00060000) + Name (_UID, 0x00) + Name (_BBN, 0x01) + Name (_PRT, Package () { + Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, + Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x13 }, /* PCI slot 1 */ + Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x10 }, + Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x11 }, + Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x00, 0x00, 0x10 }, /* PCI slot 2 */ + Package (0x04) { 0x0008FFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x0008FFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x0008FFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x11 }, + Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x00, 0x00, 0x12 }, /* FireWire */ + Package (0x04) { 0x000AFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000AFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000AFFFF, 0x03, 0x00, 0x11 }, + }) + } + } + + Device (ISA) { + Name (_ADR, 0x000010000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP0, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP0) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP1, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {12} + }) + Return (TMP1) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06) + IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + /* Parallel Port */ + Device (LPT1) + { + Name (_HID, EisaId ("PNP0400")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x08) + IRQNoFlags () {7} + }) + Return (BUF1) + } + } + /* Parallel Port ECP */ + Device (ECP1) + { + Name (_HID, EisaId ("PNP0401")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () { + IO (Decode16, 0x0378, 0x0378, 0x01, 0x04) + IO (Decode16, 0x0778, 0x0778, 0x01, 0x04) + IRQNoFlags() {7} + DMA (Compatibility, NotBusMaster, Transfer8) {0,1,3} + }) + Return (BUF1) + } + } + } + } +} diff --git a/src/mainboard/msi/ms_9652/get_bus_conf.c b/src/mainboard/msi/ms_9652/get_bus_conf.c new file mode 100644 index 0000000..36ae12c --- /dev/null +++ b/src/mainboard/msi/ms_9652/get_bus_conf.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i; + + printk(BIOS_SPEW, "get_bus_conf()\n"); + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); + printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==1: apicid_base: %08x\n", apicid_base); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + printk(BIOS_SPEW, "CONFIG_LOGICAL_CPUS==0: apicid_base: %08x\n", apicid_base); +#endif + m->apicid_mcp55 = apicid_base+0; +} diff --git a/src/mainboard/msi/ms_9652/irq_tables.c b/src/mainboard/msi/ms_9652/irq_tables.c new file mode 100644 index 0000000..54a4e54 --- /dev/null +++ b/src/mainboard/msi/ms_9652/irq_tables.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/msi/ms_9652/mainboard.c b/src/mainboard/msi/ms_9652/mainboard.c new file mode 100644 index 0000000..96760d6 --- /dev/null +++ b/src/mainboard/msi/ms_9652/mainboard.c @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> + + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/msi/ms_9652/mb_sysconf.h b/src/mainboard/msi/ms_9652/mb_sysconf.h new file mode 100644 index 0000000..ad78ef6 --- /dev/null +++ b/src/mainboard/msi/ms_9652/mb_sysconf.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; +}; + +#endif diff --git a/src/mainboard/msi/ms_9652/mptable.c b/src/mainboard/msi/ms_9652/mptable.c new file mode 100644 index 0000000..09a25f2 --- /dev/null +++ b/src/mainboard/msi/ms_9652/mptable.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/msi/ms_9652/resourcemap.c b/src/mainboard/msi/ms_9652/resourcemap.c new file mode 100644 index 0000000..3751183 --- /dev/null +++ b/src/mainboard/msi/ms_9652/resourcemap.c @@ -0,0 +1,286 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00004000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + /* Verified against board configuration registers after normal proprietary BIOS boot */ + //PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00001033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + /* Verified against board configuration registers after normal proprietary BIOS boot */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/msi/ms_9652/romstage.c b/src/mainboard/msi/ms_9652/romstage.c new file mode 100644 index 0000000..3993bae --- /dev/null +++ b/src/mainboard/msi/ms_9652/romstage.c @@ -0,0 +1,272 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627ehg/w83627ehg.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdfam10/debug.c" +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" + +static void sio_setup(void) +{ + u32 dword; + u8 byte; + + byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); +} + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +}; + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + u32 bsp_apicid = 0, val, wants_reset; + u8 reg; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sio_setup(); + } + + post_code(0x30); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + post_code(0x32); + + pnp_enter_ext_func_mode(SERIAL_DEV); + /* We have 24MHz input. */ + reg = pnp_read_config(SERIAL_DEV, 0x24); + pnp_write_config(SERIAL_DEV, 0x24, (reg & 0xbf)); + pnp_exit_ext_func_mode(SERIAL_DEV); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + printk(BIOS_DEBUG, "finalize_node_setup done\n"); + + /* Setup any mainboard PCI settings etc. */ + printk(BIOS_DEBUG, "setup_mb_resource_map begin\n"); + setup_mb_resource_map(); + printk(BIOS_DEBUG, "setup_mb_resource_map end\n"); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + printk(BIOS_DEBUG, "wait_all_other_cores_started()\n"); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + post_code(0x3D); + + printk(BIOS_DEBUG, "enable_smbus()\n"); + enable_smbus(); + + post_code(0x40); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x43); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/nec/Kconfig b/src/mainboard/nec/Kconfig index 525121f..68e68d2 100644 --- a/src/mainboard/nec/Kconfig +++ b/src/mainboard/nec/Kconfig @@ -26,7 +26,7 @@ config BOARD_NEC_POWERMATE_2000
endchoice
-source "src/mainboard/nec/powermate2000/Kconfig" +source "src/mainboard/nec/powermate_2000/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/nec/powermate2000/Kconfig b/src/mainboard/nec/powermate2000/Kconfig deleted file mode 100644 index d69aa46..0000000 --- a/src/mainboard/nec/powermate2000/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_NEC_POWERMATE_2000 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_PGA370 - select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801AX - select SUPERIO_SMSC_SMSCSUPERIO - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default nec/powermate2000 - -config MAINBOARD_PART_NUMBER - string - default "PowerMate 2000" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_NEC_POWERMATE_2000 diff --git a/src/mainboard/nec/powermate2000/board_info.txt b/src/mainboard/nec/powermate2000/board_info.txt deleted file mode 100644 index 50a4b2a..0000000 --- a/src/mainboard/nec/powermate2000/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: desktop -Board URL: http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/ -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/nec/powermate2000/devicetree.cb b/src/mainboard/nec/powermate2000/devicetree.cb deleted file mode 100644 index cd4aefe..0000000 --- a/src/mainboard/nec/powermate2000/devicetree.cb +++ /dev/null @@ -1,54 +0,0 @@ -chip northbridge/intel/i82810 # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_PGA370 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 off end # Onboard video - chip southbridge/intel/i82801ax # Southbridge - register "ide0_enable" = "1" - register "ide1_enable" = "1" - - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # ISA/LPC bridge - chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x) - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off end # Com2 (N/A) - device pnp 2e.7 on # PS/2 keyboard - irq 0x70 = 1 - irq 0x72 = 0 - end - device pnp 2e.9 off end # Game port (N/A) - device pnp 2e.a on # Power-management events (PME) - io 0x60 = 0x800 - end - device pnp 2e.b on # MIDI port - io 0x60 = 0x330 - irq 0x70 = 5 - end - end - end - device pci 1f.1 on end # IDE - device pci 1f.2 on end # USB - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # AC'97 audio - device pci 1f.6 off end # AC'97 modem (N/A) - end - end -end - diff --git a/src/mainboard/nec/powermate2000/irq_tables.c b/src/mainboard/nec/powermate2000/irq_tables.c deleted file mode 100644 index f209786..0000000 --- a/src/mainboard/nec/powermate2000/irq_tables.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router device */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x6e, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0}, - {0x01, (0x03 << 3) | 0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, - {0x01, (0x04 << 3) | 0x0, {{0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, - {0x00, (0x1f << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/nec/powermate2000/romstage.c b/src/mainboard/nec/powermate2000/romstage.c deleted file mode 100644 index d4a2d8f..0000000 --- a/src/mainboard/nec/powermate2000/romstage.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include <superio/smsc/smscsuperio/smscsuperio.h> -#include "northbridge/intel/i82810/raminit.h" -#include "cpu/x86/bist.h" -#include "southbridge/intel/i82801ax/i82801ax.h" -#include "drivers/pc80/udelay_io.c" -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_smbus(); - report_bist_failure(bist); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/nec/powermate_2000/Kconfig b/src/mainboard/nec/powermate_2000/Kconfig new file mode 100644 index 0000000..005c2d2 --- /dev/null +++ b/src/mainboard/nec/powermate_2000/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_NEC_POWERMATE_2000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801AX + select SUPERIO_SMSC_SMSCSUPERIO + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default nec/powermate_2000 + +config MAINBOARD_PART_NUMBER + string + default "PowerMate 2000" + +config IRQ_SLOT_COUNT + int + default 5 + +endif # BOARD_NEC_POWERMATE_2000 diff --git a/src/mainboard/nec/powermate_2000/board_info.txt b/src/mainboard/nec/powermate_2000/board_info.txt new file mode 100644 index 0000000..50a4b2a --- /dev/null +++ b/src/mainboard/nec/powermate_2000/board_info.txt @@ -0,0 +1,4 @@ +Category: desktop +Board URL: http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/ +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/nec/powermate_2000/devicetree.cb b/src/mainboard/nec/powermate_2000/devicetree.cb new file mode 100644 index 0000000..cd4aefe --- /dev/null +++ b/src/mainboard/nec/powermate_2000/devicetree.cb @@ -0,0 +1,54 @@ +chip northbridge/intel/i82810 # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 off end # Onboard video + chip southbridge/intel/i82801ax # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + chip superio/smsc/smscsuperio # Super I/O (SMSC LPC47B27x) + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off end # Com2 (N/A) + device pnp 2e.7 on # PS/2 keyboard + irq 0x70 = 1 + irq 0x72 = 0 + end + device pnp 2e.9 off end # Game port (N/A) + device pnp 2e.a on # Power-management events (PME) + io 0x60 = 0x800 + end + device pnp 2e.b on # MIDI port + io 0x60 = 0x330 + irq 0x70 = 5 + end + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem (N/A) + end + end +end + diff --git a/src/mainboard/nec/powermate_2000/irq_tables.c b/src/mainboard/nec/powermate_2000/irq_tables.c new file mode 100644 index 0000000..f209786 --- /dev/null +++ b/src/mainboard/nec/powermate_2000/irq_tables.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router device */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x6e, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0}, + {0x01, (0x03 << 3) | 0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, + {0x01, (0x04 << 3) | 0x0, {{0x62, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, + {0x00, (0x1f << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/nec/powermate_2000/romstage.c b/src/mainboard/nec/powermate_2000/romstage.c new file mode 100644 index 0000000..d4a2d8f --- /dev/null +++ b/src/mainboard/nec/powermate_2000/romstage.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include <superio/smsc/smscsuperio/smscsuperio.h> +#include "northbridge/intel/i82810/raminit.h" +#include "cpu/x86/bist.h" +#include "southbridge/intel/i82801ax/i82801ax.h" +#include "drivers/pc80/udelay_io.c" +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + enable_smbus(); + report_bist_failure(bist); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/packard_bell/Kconfig b/src/mainboard/packard_bell/Kconfig index 168ebd9..ed7f890 100644 --- a/src/mainboard/packard_bell/Kconfig +++ b/src/mainboard/packard_bell/Kconfig @@ -3,14 +3,14 @@ if VENDOR_PACKARD_BELL choice prompt "Mainboard model"
-config BOARD_PACKARD_BELL_MS2290 +config BOARD_PACKARD_BELL_EASYNOTE_LM85 bool "EasyNote LM85 (MS2290)" help EasyNote LM85 laptop
endchoice
-source "src/mainboard/packard_bell/ms2290/Kconfig" +source "src/mainboard/packard_bell/easynote_lm85/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/packard_bell/easynote_lm85/Kconfig b/src/mainboard/packard_bell/easynote_lm85/Kconfig new file mode 100644 index 0000000..c91ddf3 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/Kconfig @@ -0,0 +1,61 @@ +if BOARD_PACKARD_BELL_EASYNOTE_LM85 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select SYSTEM_TYPE_LAPTOP + select ARCH_BOOTBLOCK_X86_32 + select ARCH_ROMSTAGE_X86_32 + select ARCH_RAMSTAGE_X86_32 + select NORTHBRIDGE_INTEL_NEHALEM + select SOUTHBRIDGE_INTEL_IBEXPEAK + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select BOARD_ROMSIZE_KB_4096 + select HAVE_ACPI_TABLES + select HAVE_ACPI_RESUME + select MAINBOARD_HAS_NATIVE_VGA_INIT + select INTEL_INT15 + select EC_ACPI + select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG + +config MAINBOARD_DIR + string + default packard_bell/easynote_lm85 + +config MAINBOARD_PART_NUMBER + string + default "EasyNote LM85" + +config MAINBOARD_VERSION + string + default "V1.20" + +config MAINBOARD_VENDOR + string + default "Packard Bell" + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 18 + +config USBDEBUG_HCD_INDEX + int + default 2 + +config DRAM_RESET_GATE_GPIO + int + default 60 + +config MAX_CPUS + int + default 4 + +config CPU_ADDR_BITS + int + default 36 + +endif diff --git a/src/mainboard/packard_bell/easynote_lm85/Makefile.inc b/src/mainboard/packard_bell/easynote_lm85/Makefile.inc new file mode 100644 index 0000000..b47ace2 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/Makefile.inc @@ -0,0 +1,20 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/ac.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/ac.asl new file mode 100644 index 0000000..f9f0a3a --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/ac.asl @@ -0,0 +1,49 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device(AC) +{ + Name(_HID, "ACPI0003") + Name(_UID, 0x00) + Name(_PCL, Package() { _SB } ) + + Method(_PSR, 0, NotSerialized) + { + return (HPAC) + } + + Method(_STA, 0, NotSerialized) + { + Return (0x0f) + } +} + +/* AC status change */ +Method(_Q50, 0, NotSerialized) +{ + Notify (AC, 0x80) +} + +/* AC status change */ +Method(_Q51, 0, NotSerialized) +{ + Notify (AC, 0x80) +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/battery.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/battery.asl new file mode 100644 index 0000000..1ca2cf1 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/battery.asl @@ -0,0 +1,155 @@ +/* Arg0: Battery + * Arg1: Battery Status Package + * Arg2: charging + * Arg3: discharging + */ +Method(BSTA, 4, NotSerialized) +{ + Acquire(ECLK, 0xffff) + Store(0, Local0) + + Store(0, PAGE) + + Store(BAPR, Local2) + + if (Arg2) // charging + { + Or(2, Local0, Local0) + + If (LGreaterEqual (Local2, 0x8000)) { + Store(0, Local2) + } + } + + if (Arg3) // discharging + { + Or(1, Local0, Local0) + Subtract(0x10000, Local2, Local2) + } + + Store(Local0, Index(Arg1, 0x00)) + + Store(0, PAGE) + Store(BARC, Index(Arg1, 2)) + Store(Local2, Index(Arg1, 1)) + + Store(0, PAGE) + Store(BAVO, Index(Arg1, 3)) + Release(ECLK) + Return (Arg1) +} + +Method(BINF, 2, NotSerialized) +{ + Acquire(ECLK, 0xffff) + Store(0, PAGE) + Store(BAFC, Local2) + Store(1, PAGE) + Store(BADC, Local1) + + Store(Local1, Index(Arg0, 1)) // Design Capacity + Store(Local2, Index(Arg0, 2)) // Last full charge capacity + Store(1, PAGE) + Store(BADV, Index(Arg0, 4)) // Design Voltage + Divide (Local2, 20, Local0, Index(Arg0, 5)) // Warning capacity + + Store(1, PAGE) + Store (BASN, Local0) + Name (SERN, Buffer (0x06) { " " }) + Store (4, Local1) + While (Local0) + { + Divide (Local0, 0x0A, Local2, Local0) + Add (Local2, 48, Index (SERN, Local1)) + Decrement (Local1) + } + Store (SERN, Index (Arg0, 10)) // Serial Number + + Name (TYPE, Buffer() { 0, 0, 0, 0, 0 }) + Store(4, PAGE) + Store(BATY, TYPE) + Store(TYPE, Index (Arg0, 11)) // Battery type + Store(5, PAGE) + Store(BAOE, Index (Arg0, 12)) // OEM information + Store(2, PAGE) + Store(BANA, Index (Arg0, 9)) // Model number + Release(ECLK) + Return (Arg0) +} + +Device (BAT0) +{ + Name (_HID, EisaId ("PNP0C0A")) + Name (_UID, 0x00) + Name (_PCL, Package () { _SB }) + + Name (BATS, Package () + { + 0x00, // 0: PowerUnit: Report in mWh + 0xFFFFFFFF, // 1: Design cap + 0xFFFFFFFF, // 2: Last full charge cap + 0x01, // 3: Battery Technology + 10800, // 4: Design Voltage (mV) + 0x00, // 5: Warning design capacity + 200, // 6: Low design capacity + 1, // 7: granularity1 + 1, // 8: granularity2 + "", // 9: Model number + "", // A: Serial number + "", // B: Battery Type + "" // C: OEM information + }) + + Method (_BIF, 0, NotSerialized) + { + Return (BINF(BATS, 0)) + } + + Name (BATI, Package () + { + 0, // Battery State + // Bit 0 - discharge + // Bit 1 - charge + // Bit 2 - critical state + 0, // Battery present Rate + 0, // Battery remaining capacity + 0 // Battery present voltage + }) + + Method (_BST, 0, NotSerialized) + { + if (B0PR) { + Return (BSTA(0, BATI, B0CH, B0DI)) + } else { + Return (BATS) + } + } + + Method (_STA, 0, NotSerialized) + { + if (B0PR) { + Return (0x1f) + } else { + Return (0x0f) + } + } +} + +/* Battery attach/detach */ +Method(_Q40, 0, NotSerialized) +{ + Notify(BAT0, 0x81) +} +Method(_Q41, 0, NotSerialized) +{ + Notify(BAT0, 0x81) +} + +Method(_Q48, 0, NotSerialized) +{ + Notify(BAT0, 0x80) +} +Method(_Q4C, 0, NotSerialized) +{ + Notify(BAT0, 0x80) +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/ec.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/ec.asl new file mode 100644 index 0000000..3735f20 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/ec.asl @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Device(EC) +{ + Name (_HID, EISAID("PNP0C09")) + Name (_UID, 0) + + Name (_GPE, 0x17) + Mutex (ECLK, 0) + + OperationRegion(ERAM, EmbeddedControl, 0x00, 0x100) + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0x8), + PAGE, 8, /* Information Page Selector */ + Offset (0x70), + , 1, + LIDS, 1, + , 3, + HPAC, 1, + Offset (0x88), + B0PR, 1, /* Battery 0 present */ + B0CH, 1, /* Battery 0 charging */ + B0DI, 1, /* Battery 0 discharging */ + Offset (0xA8), + TMP0, 8, + TMP1, 8, + } + + Device(LID) + { + Name(_HID, "PNP0C0D") + Method(_LID, 0, NotSerialized) + { + return (LIDS) + } + } + + Method(_Q52, 0, NotSerialized) + { + Notify(LID, 0x80) + } + + Method(_Q53, 0, NotSerialized) + { + Notify(^LID, 0x80) + } + + /* PAGE = 0 */ + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0xe0), + BARC, 16, /* Battery remaining capacity */ + BAFC, 16, /* Battery full charge capacity */ + , 16, + BAPR, 16, /* Battery present rate */ + BAVO, 16, /* Battery Voltage */ + } + + /* PAGE = 1 */ + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0xe0), + BADC, 16, /* Design Capacity */ + BADV, 16, /* Design voltage */ + BASN, 16 + } + + /* PAGE = 2 */ + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0xe0), + BANA, 128, /* Battery name */ + } + + /* PAGE = 4 */ + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0xe0), + BATY, 128, /* Battery type */ + } + + /* PAGE = 5 */ + Field (ERAM, ByteAcc, NoLock, Preserve) + { + Offset (0xe0), + BAOE, 128, /* Battery OEM info */ + } + + Method (_CRS, 0) + { + Name (ECMD, ResourceTemplate() + { + IO (Decode16, 0x62, 0x62, 1, 1) + IO (Decode16, 0x66, 0x66, 1, 1) + }) + Return (ECMD) + } + Method (_INI, 0, NotSerialized) + { + } + + /* Decrease brightness. */ + Method(_Q1D, 0, NotSerialized) + { + _SB.PCI0.GFX0.LCD0.DECB() + } + /* Increase brightness. */ + Method(_Q1C, 0, NotSerialized) + { + _SB.PCI0.GFX0.LCD0.INCB() + } + +#include "battery.asl" +#include "ac.asl" +#include "thermal.asl" +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/gpe.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/gpe.asl new file mode 100644 index 0000000..cd9d784 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/gpe.asl @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (c) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +Scope (_GPE) +{ +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/nehalem_pci_irqs.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/nehalem_pci_irqs.asl new file mode 100644 index 0000000..1f782c8 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/nehalem_pci_irqs.asl @@ -0,0 +1,86 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Vladimir Serbinenko + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* This is board specific information: IRQ routing. + */ + + +// PCI Interrupt Routing +Method(_PRT) +{ + If (PICM) { + Return (Package() { + Package() { 0x0001ffff, 0, 0, 0x10 }, + Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA + Package() { 0x0003ffff, 0, 0, 0x10 }, + Package() { 0x0016ffff, 0, 0, 0x10 }, // ME + Package() { 0x0016ffff, 1, 0, 0x11 }, // ME + Package() { 0x0016ffff, 2, 0, 0x12 }, // ME + Package() { 0x0016ffff, 3, 0, 0x13 }, // ME + Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet + Package() { 0x001affff, 0, 0, 0x14 }, // USB + Package() { 0x001affff, 1, 0, 0x15 }, // USB + Package() { 0x001affff, 2, 0, 0x16 }, // USB + Package() { 0x001affff, 3, 0, 0x17 }, // USB + Package() { 0x001bffff, 1, 0, 0x11 }, // Audio + Package() { 0x001cffff, 0, 0, 0x10 }, // PCI bridge + Package() { 0x001cffff, 1, 0, 0x11 }, // PCI bridge + Package() { 0x001cffff, 2, 0, 0x12 }, // PCI bridge + Package() { 0x001cffff, 3, 0, 0x13 }, // PCI bridge + Package() { 0x001dffff, 0, 0, 0x10 }, // USB + Package() { 0x001dffff, 1, 0, 0x11 }, // USB + Package() { 0x001dffff, 2, 0, 0x12 }, // USB + Package() { 0x001dffff, 3, 0, 0x13 }, // USB + Package() { 0x001fffff, 0, 0, 0x17 }, // LPC + Package() { 0x001fffff, 1, 0, 0x10 }, // IDE + Package() { 0x001fffff, 2, 0, 0x11 }, // SATA + Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS + }) + } Else { + Return (Package() { + Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA + Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, + Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME + Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME + Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME + Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME + Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet + Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB + Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB + Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB + Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB + Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio + Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // PCI + Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // PCI + Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // PCI + Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // PCI + Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB + Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB + Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB + Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB + Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC + Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE + Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA + Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus + }) + } +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/platform.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/platform.asl new file mode 100644 index 0000000..a254a9e --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/platform.asl @@ -0,0 +1,146 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* These come from the dynamically created CPU SSDT */ +External(PDC0) +External(PDC1) + +/* The APM port can be used for generating software SMIs */ + +OperationRegion (APMP, SystemIO, 0xb2, 2) +Field (APMP, ByteAcc, NoLock, Preserve) +{ + APMC, 8, /* APM command */ + APMS, 8 /* APM status */ +} + +/* SMI I/O Trap */ +Method(TRAP, 1, Serialized) +{ + Store (Arg0, SMIF) /* SMI Function */ + Store (0, TRP0) /* Generate trap */ + Return (SMIF) /* Return value of SMI handler */ +} + +/* The _PIC method is called by the OS to choose between interrupt + * routing via the i8259 interrupt controller or the APIC. + * + * _PIC is called with a parameter of 0 for i8259 configuration and + * with a parameter of 1 for Local Apic/IOAPIC configuration. + */ + +Method(_PIC, 1) +{ + /* Remember the OS' IRQ routing choice. */ + Store(Arg0, PICM) +} + +/* The _PTS method (Prepare To Sleep) is called before the OS is + * entering a sleep state. The sleep state number is passed in Arg0 + */ + +Method(_PTS,1) +{ +} + +/* The _WAK method is called on system wakeup */ + +Method(_WAK,1) +{ + /* Not implemented. */ + Return(Package(){0,0}) +} + +/* System Bus */ + +Scope(_SB) +{ + /* This method is placed on the top level, so we can make sure it's the + * first executed _INI method. + */ + Method(_INI, 0) + { + /* The DTS data in NVS is probably not up to date. + * Update temperature values and make sure AP thermal + * interrupts can happen + */ + + /* TRAP(71) */ /* TODO */ + + /* Determine the Operating System and save the value in OSYS. + * We have to do this in order to be able to work around + * certain windows bugs. + * + * OSYS value | Operating System + * -----------+------------------ + * 2000 | Windows 2000 + * 2001 | Windows XP(+SP1) + * 2002 | Windows XP SP2 + * 2006 | Windows Vista + * ???? | Windows 7 + */ + + /* Let's assume we're running at least Windows 2000 */ + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2001.1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001.1 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006.1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2006 SP1")) { + Store (2006, OSYS) + } + + If (_OSI("Windows 2009")) { + Store (2009, OSYS) + } + + If (_OSI("Windows 2012")) { + Store (2012, OSYS) + } + } + } +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/superio.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/superio.asl new file mode 100644 index 0000000..a2657f1 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/superio.asl @@ -0,0 +1 @@ +#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi/thermal.asl b/src/mainboard/packard_bell/easynote_lm85/acpi/thermal.asl new file mode 100644 index 0000000..735171b --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi/thermal.asl @@ -0,0 +1,48 @@ +Scope(_TZ) +{ + Name (MEBT, 0) + + Method(C2K, 1, NotSerialized) + { + Multiply(Arg0, 10, Local0) + Add (Local0, 2732, Local0) + if (LLessEqual(Local0, 2732)) { + Return (3000) + } + + if (LGreater(Local0, 4012)) { + Return (3000) + } + Return (Local0) + } + + ThermalZone(THM0) + { + Method(_CRT, 0, NotSerialized) { + Return (C2K(127)) + } + Method(_TMP) { + /* Avoid tripping alarm if ME isn't booted at all yet */ + If (LAnd (LNot (MEBT), LEqual (_SB.PCI0.LPCB.EC.TMP0, 128))) { + Return (C2K(40)) + } + Store (1, MEBT) + Return (C2K(_SB.PCI0.LPCB.EC.TMP0)) + } + } + + ThermalZone(THM1) + { + Method(_CRT, 0, NotSerialized) { + Return (C2K(99)) + } + + Method(_PSV, 0, NotSerialized) { + Return (C2K(94)) + } + + Method(_TMP) { + Return (C2K(_SB.PCI0.LPCB.EC.TMP1)) + } + } +} diff --git a/src/mainboard/packard_bell/easynote_lm85/acpi_tables.c b/src/mainboard/packard_bell/easynote_lm85/acpi_tables.c new file mode 100644 index 0000000..b8979f4 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/acpi_tables.c @@ -0,0 +1,97 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <console/console.h> +#include <arch/io.h> +#include <arch/ioapic.h> +#include <arch/acpi.h> +#include <arch/acpigen.h> +#include <arch/smp/mpspec.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "southbridge/intel/ibexpeak/nvs.h" + +void acpi_create_gnvs(global_nvs_t * gnvs) +{ + memset((void *)gnvs, 0, sizeof(*gnvs)); + gnvs->apic = 1; + gnvs->mpen = 1; /* Enable Multi Processing */ + gnvs->pcnt = dev_count_cpu(); + + /* IGD Displays */ + gnvs->ndid = 3; + gnvs->did[0] = 0x80000100; + gnvs->did[1] = 0x80000240; + gnvs->did[2] = 0x80000410; + gnvs->did[3] = 0x80000410; + gnvs->did[4] = 0x00000005; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Local APICs */ + current = acpi_create_madt_lapics(current); + + /* IOAPIC */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + 1, IO_APIC_ADDR, 0); + + /* INT_SRC_OVR */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, + MP_IRQ_POLARITY_DEFAULT | + MP_IRQ_TRIGGER_DEFAULT); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_LEVEL); + + /* LAPIC_NMI */ + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 0, + MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 1, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 2, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, 3, MP_IRQ_POLARITY_HIGH | + MP_IRQ_TRIGGER_EDGE, 0x01); + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/packard_bell/easynote_lm85/board_info.txt b/src/mainboard/packard_bell/easynote_lm85/board_info.txt new file mode 100644 index 0000000..7df53c3 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/board_info.txt @@ -0,0 +1,6 @@ +Board name: EasyNote LM85 (MS2290) +Category: laptop +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: n diff --git a/src/mainboard/packard_bell/easynote_lm85/cmos.default b/src/mainboard/packard_bell/easynote_lm85/cmos.default new file mode 100644 index 0000000..5820bfa --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/cmos.default @@ -0,0 +1,7 @@ +boot_option=Fallback +last_boot=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +sata_mode=AHCI diff --git a/src/mainboard/packard_bell/easynote_lm85/cmos.layout b/src/mainboard/packard_bell/easynote_lm85/cmos.layout new file mode 100644 index 0000000..7f73e5f --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/cmos.layout @@ -0,0 +1,138 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2013 Vladimir Serbinenko +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +409 2 e 7 power_on_after_fail +411 1 e 9 sata_mode + +# coreboot config options: northbridge +424 3 e 10 gfx_uma_size + +# coreboot config options: check sums +984 16 h 0 check_sum +#1000 24 r 0 amd_reserved + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 Secondary +8 1 Primary +9 0 AHCI +9 1 Compatible +10 0 32M +10 1 48M +10 2 64M +10 3 128M +10 5 96M +10 6 160M +# ----------------------------------------------------------------- +checksums + +checksum 392 415 984 diff --git a/src/mainboard/packard_bell/easynote_lm85/devicetree.cb b/src/mainboard/packard_bell/easynote_lm85/devicetree.cb new file mode 100644 index 0000000..19f6c9c --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/devicetree.cb @@ -0,0 +1,104 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/nehalem + + register "gpu_dp_b_hotplug" = "0x04" + register "gpu_dp_c_hotplug" = "0x04" + register "gpu_dp_d_hotplug" = "0x04" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_up_delay" = "300" + register "gpu_panel_power_down_delay" = "300" + register "gpu_panel_power_backlight_on_delay" = "3000" + register "gpu_panel_power_backlight_off_delay" = "3000" + register "gpu_cpu_backlight" = "0x58d" + register "gpu_pch_backlight" = "0x061a061a" + register "gfx.use_spread_spectrum_clock" = "0" + register "gfx.lvds_dual_channel" = "1" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.lvds_num_lanes" = "4" + + device cpu_cluster 0 on + chip cpu/intel/model_2065x + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x1025 0x0379 + end + device pci 02.0 on # VGA controller + subsystemid 0x1025 0x0379 + end + chip southbridge/intel/ibexpeak + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi7_routing" = "2" + register "gpi8_routing" = "2" + + register "sata_port_map" = "0x11" + + register "gpe0_en" = "0x01800046" + register "alt_gp_smi_en" = "0x0000" + register "gen1_dec" = "0x040069" + + device pci 1a.0 on # USB2 EHCI + subsystemid 0x1025 0x0379 + end + + device pci 1b.0 on # Audio Controller + subsystemid 0x1025 0x0379 + end + + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #1 + + device pci 1d.0 on # USB2 EHCI + subsystemid 0x1025 0x0379 + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x1025 0x0379 + end + device pci 1f.2 on # IDE/SATA + subsystemid 0x1025 0x0379 + end + device pci 1f.3 on # SMBUS + subsystemid 0x1025 0x0379 + end + end + end +end diff --git a/src/mainboard/packard_bell/easynote_lm85/dsdt.asl b/src/mainboard/packard_bell/easynote_lm85/dsdt.asl new file mode 100644 index 0000000..f0eb8ec --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/dsdt.asl @@ -0,0 +1,88 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#define HAVE_LCD_SCREEN 1 + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x03, /* DSDT revision: ACPI v3.0 */ + "COREv4", /* OEM id */ + "COREBOOT", /* OEM table id */ + 0x20140108 /* OEM revision */ +) +{ + /* Some generic macros */ + #include "acpi/platform.asl" + + /* global NVS and variables */ + #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> + + /* General Purpose Events */ + #include "acpi/gpe.asl" + + #include <cpu/intel/model_206ax/acpi/cpu.asl> + + Scope (_SB) { + Device (PCI0) + { + #include <northbridge/intel/nehalem/acpi/nehalem.asl> + #include <southbridge/intel/bd82x6x/acpi/pch.asl> + } + Device (UNCR) + { + Name (_BBN, 0xFF) + Name (_ADR, 0x00) + Name (RID, 0x00) + Name (_HID, EisaId ("PNP0A03")) + Name (_CRS, ResourceTemplate () + { + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* Granularity */ + 0x00FF, /* Range Minimum */ + 0x00FF, /* Range Maximum */ + 0x0000, /* Translation Offset */ + 0x0001, /* Length */ + ,, ) + }) + Device (SAD) + { + Name (_ADR, 0x01) + Name (RID, 0x00) + OperationRegion (SADC, PCI_Config, 0x00, 0x0100) + Field (SADC, DWordAcc, NoLock, Preserve) + { + Offset (0x40), + PAM0, 8, + PAM1, 8, + PAM2, 8, + PAM3, 8, + PAM4, 8, + PAM5, 8, + PAM6, 8 + } + } + } + } + + /* Chipset specific sleep states */ + #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> +} diff --git a/src/mainboard/packard_bell/easynote_lm85/fadt.c b/src/mainboard/packard_bell/easynote_lm85/fadt.c new file mode 100644 index 0000000..0639026 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/fadt.c @@ -0,0 +1,160 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <string.h> +#include <device/pci.h> +#include <arch/acpi.h> +#include <cpu/x86/smm.h> + +/* FIXME: This needs to go into a separate .h file + * to be included by the ich7 smi handler, ich7 smi init + * code and the mainboard fadt. + */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + u16 pmbase = + pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + 0x40) & 0xfffe; + + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = sizeof(acpi_fadt_t); + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (unsigned long)facs; + fadt->dsdt = (unsigned long)dsdt; + fadt->model = 0x00; + fadt->preferred_pm_profile = PM_MOBILE; + fadt->sci_int = 0x9; + fadt->smi_cmd = APM_CNT; + fadt->acpi_enable = APM_CNT_ACPI_ENABLE; + fadt->acpi_disable = APM_CNT_ACPI_DISABLE; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = APM_CNT_PST_CONTROL; + + fadt->pm1a_evt_blk = pmbase; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = pmbase + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = pmbase + 0x50; + fadt->pm_tmr_blk = pmbase + 0x8; + fadt->gpe0_blk = pmbase + 0x20; + fadt->gpe1_blk = 0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 0x10; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = APM_CNT_CST_CONTROL; + fadt->p_lvl2_lat = 1; + fadt->p_lvl3_lat = 0x23; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0xd; + fadt->mon_alrm = 0x00; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x00; + fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | + ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | + ACPI_FADT_DOCKING_SUPPORTED; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (unsigned long)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (unsigned long)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = pmbase; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 0; + fadt->x_pm1b_evt_blk.bit_width = 0; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 32; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 0; + fadt->x_pm1b_cnt_blk.bit_width = 0; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 8; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 128; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = pmbase + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 0; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, header->length); +} diff --git a/src/mainboard/packard_bell/easynote_lm85/hda_verb.c b/src/mainboard/packard_bell/easynote_lm85/hda_verb.c new file mode 100644 index 0000000..4ec3b36 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/hda_verb.c @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Vladimir Serbinenko. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License, + * or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/azalia_device.h> + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0272, /* Codec Vendor / Device ID: Realtek ALC272X */ + 0x10250379, /* Subsystem ID */ + 0x00000006, /* Number of 4 dword sets */ + + /* NID 0x01: Subsystem ID. */ + AZALIA_SUBVENDOR(0x0, 0x10250379), + + /* NID 0x14. */ + AZALIA_PIN_CFG(0x0, 0x14, 0x99130110), + + /* NID 0x18. */ + AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), + + /* NID 0x19. */ + AZALIA_PIN_CFG(0x0, 0x19, 0x99A30920), + + /* NID 0x1D. */ + AZALIA_PIN_CFG(0x0, 0x1D, 0x4017992D), + + /* NID 0x21. */ + AZALIA_PIN_CFG(0x0, 0x21, 0x0321101F), + + 0x80862804, /* Codec Vendor / Device ID: Intel Ibexpeak HDMI. */ + 0x80860101, /* Subsystem ID */ + 0x00000004, /* Number of 4 dword sets */ + + /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x17aa21b5 */ + AZALIA_SUBVENDOR(0x3, 0x80860101), + + /* NID 0x04. */ + AZALIA_PIN_CFG(0x3, 0x04, 0x18560010), + + /* NID 0x05. */ + AZALIA_PIN_CFG(0x3, 0x05, 0x58560020), + + /* NID 0x06. */ + AZALIA_PIN_CFG(0x3, 0x06, 0x58560030), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/packard_bell/easynote_lm85/mainboard.c b/src/mainboard/packard_bell/easynote_lm85/mainboard.c new file mode 100644 index 0000000..c14e9b7 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/mainboard.c @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <northbridge/intel/nehalem/nehalem.h> +#include <southbridge/intel/bd82x6x/pch.h> +#include <ec/acpi/ec.h> + +#include <pc80/mc146818rtc.h> +#include <arch/x86/include/arch/acpigen.h> +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE +#include <drivers/intel/gma/int15.h> +#include <arch/interrupt.h> +#endif +#include <pc80/keyboard.h> +#include <cpu/x86/lapic.h> +#include <device/pci.h> +#include <smbios.h> + +static acpi_cstate_t cst_entries[] = { + {1, 1, 1000, {0x7f, 1, 2, {0}, 1, 0}}, + {2, 1, 500, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV2, 0}}, + {2, 17, 250, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV3, 0}}, +}; + +int get_cst_entries(acpi_cstate_t ** entries) +{ + *entries = cst_entries; + return ARRAY_SIZE(cst_entries); +} + + + +static void mainboard_enable(device_t dev) +{ + u16 pmbase; + + printk(BIOS_SPEW, "starting SPI configuration\n"); + + /* Configure SPI. */ + RCBA32(0x3800) = 0x07ff0500; + RCBA32(0x3804) = 0x3f046008; + RCBA32(0x3808) = 0x0058efc0; + RCBA32(0x384c) = 0x92000000; + RCBA32(0x3850) = 0x00000a0b; + RCBA32(0x3858) = 0x07ff0500; + RCBA32(0x385c) = 0x04ff0003; + RCBA32(0x3860) = 0x00020001; + RCBA32(0x3864) = 0x00000fff; + RCBA32(0x3874) = 0; + RCBA32(0x3890) = 0xf8400000; + RCBA32(0x3894) = 0x143b5006; + RCBA32(0x3898) = 0x05200302; + RCBA32(0x389c) = 0x0601209f; + RCBA32(0x38b0) = 0x00000004; + RCBA32(0x38b4) = 0x03040002; + RCBA32(0x38c0) = 0x00000007; + RCBA32(0x38c8) = 0x00002005; + RCBA32(0x38c4) = 0x00802005; + RCBA32(0x3804) = 0x3f04e008; + + printk(BIOS_SPEW, "SPI configured\n"); + + int i; + const u8 dmp[256] = { + 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x89, 0xe4, 0x30, 0x00, 0x40, 0x14, 0x00, 0x00, 0x00, 0x11, + 0x03, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00, 0xf4, 0x01, 0x00, 0x00, 0x01, + 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x62, 0x01, 0x04, 0x00, 0x08, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, + 0x42, 0x07, 0x09, 0x09, 0xf0, 0x00, 0x00, 0xf0, 0xa9, 0x00, 0x00, 0x06, 0x00, 0x00, 0xff, 0x00, + 0x00, 0x01, 0x00, 0x04, 0xff, 0xff, 0x00, 0x00, 0x00, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x04, 0x0b, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x28, 0x1b, 0x21, 0x00, 0x2c, 0x3b, 0x13, 0x00, + 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x55, 0x5a, 0x57, 0x5c, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x45, 0x00, 0x00, 0x00, + 0x52, 0x10, 0x52, 0x10, 0x64, 0x00, 0x00, 0x00, 0x74, 0x30, 0x00, 0x60, 0x00, 0x00, 0xaf, 0x0b, + 0x30, 0x45, 0x2e, 0x30, 0x38, 0x41, 0x43, 0x2e, 0x30, 0x31, 0x2e, 0x31, 0x36, 0x20, 0x00, 0x00, + }; + + for (i = 0; i < 256; i++) + ec_write (i, dmp[i]); + + pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), + PMBASE) & 0xff80; + + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); + + outl(0, pmbase + SMI_EN); + + enable_lapic(); + pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE, + DEFAULT_GPIOBASE | 1); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL, + 0x10); + + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_LFP, 2); + + /* This sneaked in here, because EasyNote has no SuperIO chip. + */ + pc_keyboard_init(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/packard_bell/easynote_lm85/romstage.c b/src/mainboard/packard_bell/easynote_lm85/romstage.c new file mode 100644 index 0000000..c4a278e --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/romstage.c @@ -0,0 +1,330 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <ec/acpi/ec.h> +#include <delay.h> +#include <timestamp.h> +#include <arch/acpi.h> +#include <cbmem.h> + +#include "arch/early_variables.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "northbridge/intel/nehalem/nehalem.h" + +#include "northbridge/intel/nehalem/raminit.h" +#include "southbridge/intel/ibexpeak/me.h" + +static void pch_enable_lpc(void) +{ + /* Enable EC, PS/2 Keyboard/Mouse */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, + CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | + COMA_LPC_EN); + + pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, (0x68 & ~3) | 0x00040001); + + pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); + + pci_write_config32(PCH_LPC_DEV, 0xd0, 0x0); + pci_write_config32(PCH_LPC_DEV, 0xdc, 0x8); + + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + (pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) & ~2) | 1); + + pci_write_config32(PCH_LPC_DEV, ETR3, + pci_read_config32(PCH_LPC_DEV, ETR3) & ~ETR3_CF9GR); +} + +static void rcba_config(void) +{ + static const u32 rcba_dump3[] = { + /* 30fc */ 0x00000000, + /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, + /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, + /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, + /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, + /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, + /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, + /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, + /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, + /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3340 */ 0x000fffff, 0x00000000, 0x00000000, 0x00000000, + /* 3350 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3360 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3370 */ 0x00000000, 0x00000000, 0x7f8fdfff, 0x00000000, + /* 3380 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3390 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33a0 */ 0x00003900, 0x00000000, 0x00000000, 0x00000000, + /* 33b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33c0 */ 0x00010000, 0x00000000, 0x00000000, 0x0001004b, + /* 33d0 */ 0x06000008, 0x00010000, 0x00000000, 0x00000000, + /* 33e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 33f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3400 */ 0x0000001c, 0x00000080, 0x00000000, 0x00000000, + /* 3410 */ 0x00000c61, 0x00000000, 0x16fc1fe1, 0xbf4f001f, + /* 3420 */ 0x00000000, 0x00060010, 0x0000001d, 0x00000000, + /* 3430 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3440 */ 0xdeaddeed, 0x00000000, 0x00000000, 0x00000000, + /* 3450 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3460 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3470 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3480 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3490 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 34f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3500 */ 0x20000557, 0x2000055f, 0x2000074b, 0x2000074b, + /* 3510 */ 0x20000557, 0x2000014b, 0x2000074b, 0x2000074b, + /* 3520 */ 0x2000074b, 0x2000074b, 0x2000055f, 0x2000055f, + /* 3530 */ 0x20000557, 0x2000055f, 0x00000000, 0x00000000, + /* 3540 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3550 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3560 */ 0x00000001, 0x000026a3, 0x00040002, 0x01000052, + /* 3570 */ 0x02000772, 0x16000f8f, 0x1800ff4f, 0x0001d630, + /* 3580 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3590 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35a0 */ 0xfc000201, 0x3c000201, 0x00000000, 0x00000000, + /* 35b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 35f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x0a001f00, 0x00000000, 0x00000000, 0x00000001, + /* 3610 */ 0x00010000, 0x00000000, 0x00000000, 0x00000000, + /* 3600 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3610 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3620 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3630 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3640 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3650 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3660 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3670 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3680 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3690 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36b0 */ 0x00000000, 0x089c0018, 0x00000000, 0x00000000, + /* 36c0 */ 0x11111111, 0x00000000, 0x00000000, 0x00000000, + /* 36d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 36f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, + }; + unsigned i; + for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { + RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; + (void)RCBA32(4 * i + 0x30fc); + } +} + +static inline void write_acpi32(u32 addr, u32 val) +{ + outl(val, DEFAULT_PMBASE | addr); +} + +static inline void write_acpi16(u32 addr, u16 val) +{ + outw(val, DEFAULT_PMBASE | addr); +} + +static inline u32 read_acpi32(u32 addr) +{ + return inl(DEFAULT_PMBASE | addr); +} + +static inline u16 read_acpi16(u32 addr) +{ + return inw(DEFAULT_PMBASE | addr); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 reg32; + int s3resume = 0; + const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 }; + + timestamp_init(rdtsc ()); + + /* SERR pin is confused on reset. Clear NMI. */ + outb(4, 0x61); + outb(0, 0x61); + + timestamp_add_now(TS_START_ROMSTAGE); + + if (bist == 0) + enable_lapic(); + + nehalem_early_initialization(NEHALEM_MOBILE); + + pch_enable_lpc(); + + /* Enable GPIOs */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); + pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); + outl (0x796bd9c3, DEFAULT_GPIOBASE); + outl (0x86fec7c2, DEFAULT_GPIOBASE + 4); + outl (0xe4e8d7fe, DEFAULT_GPIOBASE + 0xc); + outl (0, DEFAULT_GPIOBASE + 0x18); + outl (0x00004182, DEFAULT_GPIOBASE + 0x2c); + outl (0x123360f8, DEFAULT_GPIOBASE + 0x30); + outl (0x1f47bfa8, DEFAULT_GPIOBASE + 0x34); + outl (0xfffe7fb6, DEFAULT_GPIOBASE + 0x38); + + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + /* Read PM1_CNT */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); + if (((reg32 >> 10) & 7) == 5) { + u8 reg8; + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); + printk(BIOS_DEBUG, "a2: %02x\n", reg8); + if (!(reg8 & 0x20)) { + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + printk(BIOS_DEBUG, "Bad resume from S3 detected.\n"); + } else { + if (acpi_s3_resume_allowed()) { + printk(BIOS_DEBUG, "Resume from S3 detected.\n"); + s3resume = 1; + } else { + printk(BIOS_DEBUG, + "Resume from S3 detected, but disabled.\n"); + } + } + } + + /* Enable SMBUS. */ + enable_smbus(); + + write_acpi16(0x2, 0x0); + write_acpi32(0x28, 0x0); + write_acpi32(0x2c, 0x0); + if (!s3resume) { + read_acpi32(0x4); + read_acpi32(0x20); + read_acpi32(0x34); + write_acpi16(0x0, 0x900); + write_acpi32(0x20, 0xffff7ffe); + write_acpi32(0x34, 0x56974); + pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, + pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) | 2); + } + + early_thermal_init(); + + timestamp_add_now(TS_BEFORE_INITRAM); + + chipset_init(s3resume); + raminit(s3resume, spd_addrmap); + + timestamp_add_now(TS_AFTER_INITRAM); + + intel_early_me_status(); + + if (s3resume) { + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + reg32 = inl(DEFAULT_PMBASE + 0x04); + outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); + } + +#if CONFIG_HAVE_ACPI_RESUME + /* If there is no high memory area, we didn't boot before, so + * this is not a resume. In that case we just create the cbmem toc. + */ + if (s3resume) { + void *resume_backup_memory; + + resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); + + /* copy 1MB - 64K to high tables ram_base to prevent memory corruption + * through stage 2. We could keep stuff like stack and heap in high tables + * memory completely, but that's a wonderful clean up task for another + * day. + */ + if (resume_backup_memory) + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); + + /* Magic for S3 resume */ + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); + } else { + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); + quick_ram_check(); + } +#endif + + timestamp_add_now(TS_END_ROMSTAGE); +} diff --git a/src/mainboard/packard_bell/easynote_lm85/smihandler.c b/src/mainboard/packard_bell/easynote_lm85/smihandler.c new file mode 100644 index 0000000..f04ff90 --- /dev/null +++ b/src/mainboard/packard_bell/easynote_lm85/smihandler.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <arch/io.h> +#include <console/console.h> +#include <cpu/x86/smm.h> +#include "southbridge/intel/ibexpeak/nvs.h" +#include "southbridge/intel/ibexpeak/pch.h" +#include "southbridge/intel/ibexpeak/me.h" +#include <northbridge/intel/sandybridge/sandybridge.h> +#include <cpu/intel/model_2065x/model_2065x.h> +#include <ec/acpi/ec.h> +#include <pc80/mc146818rtc.h> +#include <delay.h> + +/* The southbridge SMI handler checks whether gnvs has a + * valid pointer before calling the trap handler + */ +extern global_nvs_t *gnvs; + +static void mainboard_smm_init(void) +{ + printk(BIOS_DEBUG, "initializing SMI\n"); +} + +int mainboard_io_trap_handler(int smif) +{ + static int smm_initialized; + + if (!smm_initialized) { + mainboard_smm_init(); + smm_initialized = 1; + } + + switch (smif) { + + default: + return 0; + } + + /* On success, the IO Trap Handler returns 1 + * On failure, the IO Trap Handler returns a value != 1 */ + return 1; +} + +void mainboard_smi_gpi(u32 gpi_sts) +{ +} + +static int mainboard_finalized = 0; + +int mainboard_smi_apmc(u8 data) +{ + u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; + u8 tmp; + + printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, + data); + + if (!pmbase) + return 0; + + switch (data) { + case APM_CNT_FINALIZE: + printk(BIOS_DEBUG, "APMC: FINALIZE\n"); + if (mainboard_finalized) { + printk(BIOS_DEBUG, "APMC#: Already finalized\n"); + return 0; + } + + intel_me_finalize_smm(); + intel_pch_finalize_smm(); + intel_sandybridge_finalize_smm(); + intel_model_2065x_finalize_smm(); + + mainboard_finalized = 1; + break; + case APM_CNT_ACPI_ENABLE: + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x02; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + case APM_CNT_ACPI_DISABLE: + tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); + tmp &= ~0x03; + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); + break; + default: + break; + } + return 0; +} diff --git a/src/mainboard/packard_bell/ms2290/Kconfig b/src/mainboard/packard_bell/ms2290/Kconfig deleted file mode 100644 index 1209ada..0000000 --- a/src/mainboard/packard_bell/ms2290/Kconfig +++ /dev/null @@ -1,61 +0,0 @@ -if BOARD_PACKARD_BELL_MS2290 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select SYSTEM_TYPE_LAPTOP - select ARCH_BOOTBLOCK_X86_32 - select ARCH_ROMSTAGE_X86_32 - select ARCH_RAMSTAGE_X86_32 - select NORTHBRIDGE_INTEL_NEHALEM - select SOUTHBRIDGE_INTEL_IBEXPEAK - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select BOARD_ROMSIZE_KB_4096 - select HAVE_ACPI_TABLES - select HAVE_ACPI_RESUME - select MAINBOARD_HAS_NATIVE_VGA_INIT - select INTEL_INT15 - select EC_ACPI - select MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG - -config MAINBOARD_DIR - string - default packard_bell/ms2290 - -config MAINBOARD_PART_NUMBER - string - default "EasyNote LM85" - -config MAINBOARD_VERSION - string - default "V1.20" - -config MAINBOARD_VENDOR - string - default "Packard Bell" - -config MMCONF_BASE_ADDRESS - hex - default 0xe0000000 - -config IRQ_SLOT_COUNT - int - default 18 - -config USBDEBUG_HCD_INDEX - int - default 2 - -config DRAM_RESET_GATE_GPIO - int - default 60 - -config MAX_CPUS - int - default 4 - -config CPU_ADDR_BITS - int - default 36 - -endif diff --git a/src/mainboard/packard_bell/ms2290/Makefile.inc b/src/mainboard/packard_bell/ms2290/Makefile.inc deleted file mode 100644 index b47ace2..0000000 --- a/src/mainboard/packard_bell/ms2290/Makefile.inc +++ /dev/null @@ -1,20 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c diff --git a/src/mainboard/packard_bell/ms2290/acpi/ac.asl b/src/mainboard/packard_bell/ms2290/acpi/ac.asl deleted file mode 100644 index f9f0a3a..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/ac.asl +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device(AC) -{ - Name(_HID, "ACPI0003") - Name(_UID, 0x00) - Name(_PCL, Package() { _SB } ) - - Method(_PSR, 0, NotSerialized) - { - return (HPAC) - } - - Method(_STA, 0, NotSerialized) - { - Return (0x0f) - } -} - -/* AC status change */ -Method(_Q50, 0, NotSerialized) -{ - Notify (AC, 0x80) -} - -/* AC status change */ -Method(_Q51, 0, NotSerialized) -{ - Notify (AC, 0x80) -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/battery.asl b/src/mainboard/packard_bell/ms2290/acpi/battery.asl deleted file mode 100644 index 1ca2cf1..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/battery.asl +++ /dev/null @@ -1,155 +0,0 @@ -/* Arg0: Battery - * Arg1: Battery Status Package - * Arg2: charging - * Arg3: discharging - */ -Method(BSTA, 4, NotSerialized) -{ - Acquire(ECLK, 0xffff) - Store(0, Local0) - - Store(0, PAGE) - - Store(BAPR, Local2) - - if (Arg2) // charging - { - Or(2, Local0, Local0) - - If (LGreaterEqual (Local2, 0x8000)) { - Store(0, Local2) - } - } - - if (Arg3) // discharging - { - Or(1, Local0, Local0) - Subtract(0x10000, Local2, Local2) - } - - Store(Local0, Index(Arg1, 0x00)) - - Store(0, PAGE) - Store(BARC, Index(Arg1, 2)) - Store(Local2, Index(Arg1, 1)) - - Store(0, PAGE) - Store(BAVO, Index(Arg1, 3)) - Release(ECLK) - Return (Arg1) -} - -Method(BINF, 2, NotSerialized) -{ - Acquire(ECLK, 0xffff) - Store(0, PAGE) - Store(BAFC, Local2) - Store(1, PAGE) - Store(BADC, Local1) - - Store(Local1, Index(Arg0, 1)) // Design Capacity - Store(Local2, Index(Arg0, 2)) // Last full charge capacity - Store(1, PAGE) - Store(BADV, Index(Arg0, 4)) // Design Voltage - Divide (Local2, 20, Local0, Index(Arg0, 5)) // Warning capacity - - Store(1, PAGE) - Store (BASN, Local0) - Name (SERN, Buffer (0x06) { " " }) - Store (4, Local1) - While (Local0) - { - Divide (Local0, 0x0A, Local2, Local0) - Add (Local2, 48, Index (SERN, Local1)) - Decrement (Local1) - } - Store (SERN, Index (Arg0, 10)) // Serial Number - - Name (TYPE, Buffer() { 0, 0, 0, 0, 0 }) - Store(4, PAGE) - Store(BATY, TYPE) - Store(TYPE, Index (Arg0, 11)) // Battery type - Store(5, PAGE) - Store(BAOE, Index (Arg0, 12)) // OEM information - Store(2, PAGE) - Store(BANA, Index (Arg0, 9)) // Model number - Release(ECLK) - Return (Arg0) -} - -Device (BAT0) -{ - Name (_HID, EisaId ("PNP0C0A")) - Name (_UID, 0x00) - Name (_PCL, Package () { _SB }) - - Name (BATS, Package () - { - 0x00, // 0: PowerUnit: Report in mWh - 0xFFFFFFFF, // 1: Design cap - 0xFFFFFFFF, // 2: Last full charge cap - 0x01, // 3: Battery Technology - 10800, // 4: Design Voltage (mV) - 0x00, // 5: Warning design capacity - 200, // 6: Low design capacity - 1, // 7: granularity1 - 1, // 8: granularity2 - "", // 9: Model number - "", // A: Serial number - "", // B: Battery Type - "" // C: OEM information - }) - - Method (_BIF, 0, NotSerialized) - { - Return (BINF(BATS, 0)) - } - - Name (BATI, Package () - { - 0, // Battery State - // Bit 0 - discharge - // Bit 1 - charge - // Bit 2 - critical state - 0, // Battery present Rate - 0, // Battery remaining capacity - 0 // Battery present voltage - }) - - Method (_BST, 0, NotSerialized) - { - if (B0PR) { - Return (BSTA(0, BATI, B0CH, B0DI)) - } else { - Return (BATS) - } - } - - Method (_STA, 0, NotSerialized) - { - if (B0PR) { - Return (0x1f) - } else { - Return (0x0f) - } - } -} - -/* Battery attach/detach */ -Method(_Q40, 0, NotSerialized) -{ - Notify(BAT0, 0x81) -} -Method(_Q41, 0, NotSerialized) -{ - Notify(BAT0, 0x81) -} - -Method(_Q48, 0, NotSerialized) -{ - Notify(BAT0, 0x80) -} -Method(_Q4C, 0, NotSerialized) -{ - Notify(BAT0, 0x80) -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/ec.asl b/src/mainboard/packard_bell/ms2290/acpi/ec.asl deleted file mode 100644 index 3735f20..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/ec.asl +++ /dev/null @@ -1,136 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Device(EC) -{ - Name (_HID, EISAID("PNP0C09")) - Name (_UID, 0) - - Name (_GPE, 0x17) - Mutex (ECLK, 0) - - OperationRegion(ERAM, EmbeddedControl, 0x00, 0x100) - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0x8), - PAGE, 8, /* Information Page Selector */ - Offset (0x70), - , 1, - LIDS, 1, - , 3, - HPAC, 1, - Offset (0x88), - B0PR, 1, /* Battery 0 present */ - B0CH, 1, /* Battery 0 charging */ - B0DI, 1, /* Battery 0 discharging */ - Offset (0xA8), - TMP0, 8, - TMP1, 8, - } - - Device(LID) - { - Name(_HID, "PNP0C0D") - Method(_LID, 0, NotSerialized) - { - return (LIDS) - } - } - - Method(_Q52, 0, NotSerialized) - { - Notify(LID, 0x80) - } - - Method(_Q53, 0, NotSerialized) - { - Notify(^LID, 0x80) - } - - /* PAGE = 0 */ - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0xe0), - BARC, 16, /* Battery remaining capacity */ - BAFC, 16, /* Battery full charge capacity */ - , 16, - BAPR, 16, /* Battery present rate */ - BAVO, 16, /* Battery Voltage */ - } - - /* PAGE = 1 */ - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0xe0), - BADC, 16, /* Design Capacity */ - BADV, 16, /* Design voltage */ - BASN, 16 - } - - /* PAGE = 2 */ - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0xe0), - BANA, 128, /* Battery name */ - } - - /* PAGE = 4 */ - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0xe0), - BATY, 128, /* Battery type */ - } - - /* PAGE = 5 */ - Field (ERAM, ByteAcc, NoLock, Preserve) - { - Offset (0xe0), - BAOE, 128, /* Battery OEM info */ - } - - Method (_CRS, 0) - { - Name (ECMD, ResourceTemplate() - { - IO (Decode16, 0x62, 0x62, 1, 1) - IO (Decode16, 0x66, 0x66, 1, 1) - }) - Return (ECMD) - } - Method (_INI, 0, NotSerialized) - { - } - - /* Decrease brightness. */ - Method(_Q1D, 0, NotSerialized) - { - _SB.PCI0.GFX0.LCD0.DECB() - } - /* Increase brightness. */ - Method(_Q1C, 0, NotSerialized) - { - _SB.PCI0.GFX0.LCD0.INCB() - } - -#include "battery.asl" -#include "ac.asl" -#include "thermal.asl" -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/gpe.asl b/src/mainboard/packard_bell/ms2290/acpi/gpe.asl deleted file mode 100644 index cd9d784..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/gpe.asl +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (c) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -Scope (_GPE) -{ -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/nehalem_pci_irqs.asl b/src/mainboard/packard_bell/ms2290/acpi/nehalem_pci_irqs.asl deleted file mode 100644 index 1f782c8..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/nehalem_pci_irqs.asl +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Vladimir Serbinenko - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* This is board specific information: IRQ routing. - */ - - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - Package() { 0x0001ffff, 0, 0, 0x10 }, - Package() { 0x0002ffff, 0, 0, 0x10 }, // VGA - Package() { 0x0003ffff, 0, 0, 0x10 }, - Package() { 0x0016ffff, 0, 0, 0x10 }, // ME - Package() { 0x0016ffff, 1, 0, 0x11 }, // ME - Package() { 0x0016ffff, 2, 0, 0x12 }, // ME - Package() { 0x0016ffff, 3, 0, 0x13 }, // ME - Package() { 0x0019ffff, 0, 0, 0x14 }, // Ethernet - Package() { 0x001affff, 0, 0, 0x14 }, // USB - Package() { 0x001affff, 1, 0, 0x15 }, // USB - Package() { 0x001affff, 2, 0, 0x16 }, // USB - Package() { 0x001affff, 3, 0, 0x17 }, // USB - Package() { 0x001bffff, 1, 0, 0x11 }, // Audio - Package() { 0x001cffff, 0, 0, 0x10 }, // PCI bridge - Package() { 0x001cffff, 1, 0, 0x11 }, // PCI bridge - Package() { 0x001cffff, 2, 0, 0x12 }, // PCI bridge - Package() { 0x001cffff, 3, 0, 0x13 }, // PCI bridge - Package() { 0x001dffff, 0, 0, 0x10 }, // USB - Package() { 0x001dffff, 1, 0, 0x11 }, // USB - Package() { 0x001dffff, 2, 0, 0x12 }, // USB - Package() { 0x001dffff, 3, 0, 0x13 }, // USB - Package() { 0x001fffff, 0, 0, 0x17 }, // LPC - Package() { 0x001fffff, 1, 0, 0x10 }, // IDE - Package() { 0x001fffff, 2, 0, 0x11 }, // SATA - Package() { 0x001fffff, 3, 0, 0x13 } // SMBUS - }) - } Else { - Return (Package() { - Package() { 0x0001ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0002ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // VGA - Package() { 0x0003ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // ME - Package() { 0x0016ffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // ME - Package() { 0x0016ffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // ME - Package() { 0x0016ffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // ME - Package() { 0x0019ffff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // Ethernet - Package() { 0x001affff, 0, _SB.PCI0.LPCB.LNKE, 0 }, // USB - Package() { 0x001affff, 1, _SB.PCI0.LPCB.LNKF, 0 }, // USB - Package() { 0x001affff, 2, _SB.PCI0.LPCB.LNKG, 0 }, // USB - Package() { 0x001affff, 3, _SB.PCI0.LPCB.LNKH, 0 }, // USB - Package() { 0x001bffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // Audio - Package() { 0x001cffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // PCI - Package() { 0x001cffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // PCI - Package() { 0x001cffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // PCI - Package() { 0x001cffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // PCI - Package() { 0x001dffff, 0, _SB.PCI0.LPCB.LNKA, 0 }, // USB - Package() { 0x001dffff, 1, _SB.PCI0.LPCB.LNKB, 0 }, // USB - Package() { 0x001dffff, 2, _SB.PCI0.LPCB.LNKC, 0 }, // USB - Package() { 0x001dffff, 3, _SB.PCI0.LPCB.LNKD, 0 }, // USB - Package() { 0x001fffff, 0, _SB.PCI0.LPCB.LNKH, 0 }, // LPC - Package() { 0x001fffff, 1, _SB.PCI0.LPCB.LNKA, 0 }, // IDE - Package() { 0x001fffff, 2, _SB.PCI0.LPCB.LNKB, 0 }, // SATA - Package() { 0x001fffff, 3, _SB.PCI0.LPCB.LNKD, 0 } // SMBus - }) - } -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/platform.asl b/src/mainboard/packard_bell/ms2290/acpi/platform.asl deleted file mode 100644 index a254a9e..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/platform.asl +++ /dev/null @@ -1,146 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* These come from the dynamically created CPU SSDT */ -External(PDC0) -External(PDC1) - -/* The APM port can be used for generating software SMIs */ - -OperationRegion (APMP, SystemIO, 0xb2, 2) -Field (APMP, ByteAcc, NoLock, Preserve) -{ - APMC, 8, /* APM command */ - APMS, 8 /* APM status */ -} - -/* SMI I/O Trap */ -Method(TRAP, 1, Serialized) -{ - Store (Arg0, SMIF) /* SMI Function */ - Store (0, TRP0) /* Generate trap */ - Return (SMIF) /* Return value of SMI handler */ -} - -/* The _PIC method is called by the OS to choose between interrupt - * routing via the i8259 interrupt controller or the APIC. - * - * _PIC is called with a parameter of 0 for i8259 configuration and - * with a parameter of 1 for Local Apic/IOAPIC configuration. - */ - -Method(_PIC, 1) -{ - /* Remember the OS' IRQ routing choice. */ - Store(Arg0, PICM) -} - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - /* Not implemented. */ - Return(Package(){0,0}) -} - -/* System Bus */ - -Scope(_SB) -{ - /* This method is placed on the top level, so we can make sure it's the - * first executed _INI method. - */ - Method(_INI, 0) - { - /* The DTS data in NVS is probably not up to date. - * Update temperature values and make sure AP thermal - * interrupts can happen - */ - - /* TRAP(71) */ /* TODO */ - - /* Determine the Operating System and save the value in OSYS. - * We have to do this in order to be able to work around - * certain windows bugs. - * - * OSYS value | Operating System - * -----------+------------------ - * 2000 | Windows 2000 - * 2001 | Windows XP(+SP1) - * 2002 | Windows XP SP2 - * 2006 | Windows Vista - * ???? | Windows 7 - */ - - /* Let's assume we're running at least Windows 2000 */ - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2001.1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001.1 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2006.1")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2006 SP1")) { - Store (2006, OSYS) - } - - If (_OSI("Windows 2009")) { - Store (2009, OSYS) - } - - If (_OSI("Windows 2012")) { - Store (2012, OSYS) - } - } - } -} diff --git a/src/mainboard/packard_bell/ms2290/acpi/superio.asl b/src/mainboard/packard_bell/ms2290/acpi/superio.asl deleted file mode 100644 index a2657f1..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -#include "../../../../drivers/pc80/ps2_controller.asl" diff --git a/src/mainboard/packard_bell/ms2290/acpi/thermal.asl b/src/mainboard/packard_bell/ms2290/acpi/thermal.asl deleted file mode 100644 index 735171b..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi/thermal.asl +++ /dev/null @@ -1,48 +0,0 @@ -Scope(_TZ) -{ - Name (MEBT, 0) - - Method(C2K, 1, NotSerialized) - { - Multiply(Arg0, 10, Local0) - Add (Local0, 2732, Local0) - if (LLessEqual(Local0, 2732)) { - Return (3000) - } - - if (LGreater(Local0, 4012)) { - Return (3000) - } - Return (Local0) - } - - ThermalZone(THM0) - { - Method(_CRT, 0, NotSerialized) { - Return (C2K(127)) - } - Method(_TMP) { - /* Avoid tripping alarm if ME isn't booted at all yet */ - If (LAnd (LNot (MEBT), LEqual (_SB.PCI0.LPCB.EC.TMP0, 128))) { - Return (C2K(40)) - } - Store (1, MEBT) - Return (C2K(_SB.PCI0.LPCB.EC.TMP0)) - } - } - - ThermalZone(THM1) - { - Method(_CRT, 0, NotSerialized) { - Return (C2K(99)) - } - - Method(_PSV, 0, NotSerialized) { - Return (C2K(94)) - } - - Method(_TMP) { - Return (C2K(_SB.PCI0.LPCB.EC.TMP1)) - } - } -} diff --git a/src/mainboard/packard_bell/ms2290/acpi_tables.c b/src/mainboard/packard_bell/ms2290/acpi_tables.c deleted file mode 100644 index b8979f4..0000000 --- a/src/mainboard/packard_bell/ms2290/acpi_tables.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/smp/mpspec.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/intel/ibexpeak/nvs.h" - -void acpi_create_gnvs(global_nvs_t * gnvs) -{ - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - gnvs->pcnt = dev_count_cpu(); - - /* IGD Displays */ - gnvs->ndid = 3; - gnvs->did[0] = 0x80000100; - gnvs->did[1] = 0x80000240; - gnvs->did[2] = 0x80000410; - gnvs->did[3] = 0x80000410; - gnvs->did[4] = 0x00000005; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 1, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, - MP_IRQ_POLARITY_DEFAULT | - MP_IRQ_TRIGGER_DEFAULT); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_LEVEL); - - /* LAPIC_NMI */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 0, - MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 1, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 2, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, 3, MP_IRQ_POLARITY_HIGH | - MP_IRQ_TRIGGER_EDGE, 0x01); - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/packard_bell/ms2290/board_info.txt b/src/mainboard/packard_bell/ms2290/board_info.txt deleted file mode 100644 index 7df53c3..0000000 --- a/src/mainboard/packard_bell/ms2290/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Board name: EasyNote LM85 (MS2290) -Category: laptop -ROM package: SOIC-8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: n diff --git a/src/mainboard/packard_bell/ms2290/cmos.default b/src/mainboard/packard_bell/ms2290/cmos.default deleted file mode 100644 index 5820bfa..0000000 --- a/src/mainboard/packard_bell/ms2290/cmos.default +++ /dev/null @@ -1,7 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -sata_mode=AHCI diff --git a/src/mainboard/packard_bell/ms2290/cmos.layout b/src/mainboard/packard_bell/ms2290/cmos.layout deleted file mode 100644 index 7f73e5f..0000000 --- a/src/mainboard/packard_bell/ms2290/cmos.layout +++ /dev/null @@ -1,138 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2013 Vladimir Serbinenko -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -411 1 e 9 sata_mode - -# coreboot config options: northbridge -424 3 e 10 gfx_uma_size - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 Secondary -8 1 Primary -9 0 AHCI -9 1 Compatible -10 0 32M -10 1 48M -10 2 64M -10 3 128M -10 5 96M -10 6 160M -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/packard_bell/ms2290/devicetree.cb b/src/mainboard/packard_bell/ms2290/devicetree.cb deleted file mode 100644 index 19f6c9c..0000000 --- a/src/mainboard/packard_bell/ms2290/devicetree.cb +++ /dev/null @@ -1,104 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/nehalem - - register "gpu_dp_b_hotplug" = "0x04" - register "gpu_dp_c_hotplug" = "0x04" - register "gpu_dp_d_hotplug" = "0x04" - - # Enable Panel as LVDS and configure power delays - register "gpu_panel_port_select" = "0" # LVDS - register "gpu_panel_power_cycle_delay" = "6" - register "gpu_panel_power_up_delay" = "300" - register "gpu_panel_power_down_delay" = "300" - register "gpu_panel_power_backlight_on_delay" = "3000" - register "gpu_panel_power_backlight_off_delay" = "3000" - register "gpu_cpu_backlight" = "0x58d" - register "gpu_pch_backlight" = "0x061a061a" - register "gfx.use_spread_spectrum_clock" = "0" - register "gfx.lvds_dual_channel" = "1" - register "gfx.link_frequency_270_mhz" = "1" - register "gfx.lvds_num_lanes" = "4" - - device cpu_cluster 0 on - chip cpu/intel/model_2065x - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x1025 0x0379 - end - device pci 02.0 on # VGA controller - subsystemid 0x1025 0x0379 - end - chip southbridge/intel/ibexpeak - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - - # GPI routing - # 0 No effect (default) - # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - # 2 SCI (if corresponding GPIO_EN bit is also set) - register "gpi7_routing" = "2" - register "gpi8_routing" = "2" - - register "sata_port_map" = "0x11" - - register "gpe0_en" = "0x01800046" - register "alt_gp_smi_en" = "0x0000" - register "gen1_dec" = "0x040069" - - device pci 1a.0 on # USB2 EHCI - subsystemid 0x1025 0x0379 - end - - device pci 1b.0 on # Audio Controller - subsystemid 0x1025 0x0379 - end - - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #1 - - device pci 1d.0 on # USB2 EHCI - subsystemid 0x1025 0x0379 - end - device pci 1f.0 on # PCI-LPC bridge - subsystemid 0x1025 0x0379 - end - device pci 1f.2 on # IDE/SATA - subsystemid 0x1025 0x0379 - end - device pci 1f.3 on # SMBUS - subsystemid 0x1025 0x0379 - end - end - end -end diff --git a/src/mainboard/packard_bell/ms2290/dsdt.asl b/src/mainboard/packard_bell/ms2290/dsdt.asl deleted file mode 100644 index f0eb8ec..0000000 --- a/src/mainboard/packard_bell/ms2290/dsdt.asl +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#define HAVE_LCD_SCREEN 1 - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x03, /* DSDT revision: ACPI v3.0 */ - "COREv4", /* OEM id */ - "COREBOOT", /* OEM table id */ - 0x20140108 /* OEM revision */ -) -{ - /* Some generic macros */ - #include "acpi/platform.asl" - - /* global NVS and variables */ - #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl> - - /* General Purpose Events */ - #include "acpi/gpe.asl" - - #include <cpu/intel/model_206ax/acpi/cpu.asl> - - Scope (_SB) { - Device (PCI0) - { - #include <northbridge/intel/nehalem/acpi/nehalem.asl> - #include <southbridge/intel/bd82x6x/acpi/pch.asl> - } - Device (UNCR) - { - Name (_BBN, 0xFF) - Name (_ADR, 0x00) - Name (RID, 0x00) - Name (_HID, EisaId ("PNP0A03")) - Name (_CRS, ResourceTemplate () - { - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, /* Granularity */ - 0x00FF, /* Range Minimum */ - 0x00FF, /* Range Maximum */ - 0x0000, /* Translation Offset */ - 0x0001, /* Length */ - ,, ) - }) - Device (SAD) - { - Name (_ADR, 0x01) - Name (RID, 0x00) - OperationRegion (SADC, PCI_Config, 0x00, 0x0100) - Field (SADC, DWordAcc, NoLock, Preserve) - { - Offset (0x40), - PAM0, 8, - PAM1, 8, - PAM2, 8, - PAM3, 8, - PAM4, 8, - PAM5, 8, - PAM6, 8 - } - } - } - } - - /* Chipset specific sleep states */ - #include <southbridge/intel/i82801gx/acpi/sleepstates.asl> -} diff --git a/src/mainboard/packard_bell/ms2290/fadt.c b/src/mainboard/packard_bell/ms2290/fadt.c deleted file mode 100644 index 0639026..0000000 --- a/src/mainboard/packard_bell/ms2290/fadt.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <string.h> -#include <device/pci.h> -#include <arch/acpi.h> -#include <cpu/x86/smm.h> - -/* FIXME: This needs to go into a separate .h file - * to be included by the ich7 smi handler, ich7 smi init - * code and the mainboard fadt. - */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - u16 pmbase = - pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - 0x40) & 0xfffe; - - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = sizeof(acpi_fadt_t); - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (unsigned long)facs; - fadt->dsdt = (unsigned long)dsdt; - fadt->model = 0x00; - fadt->preferred_pm_profile = PM_MOBILE; - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = APM_CNT_PST_CONTROL; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 0x10; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = APM_CNT_CST_CONTROL; - fadt->p_lvl2_lat = 1; - fadt->p_lvl3_lat = 0x23; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x32; - fadt->iapc_boot_arch = 0x00; - fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_DOCKING_SUPPORTED; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (unsigned long)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (unsigned long)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 0; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 32; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 0; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 0; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, header->length); -} diff --git a/src/mainboard/packard_bell/ms2290/hda_verb.c b/src/mainboard/packard_bell/ms2290/hda_verb.c deleted file mode 100644 index 4ec3b36..0000000 --- a/src/mainboard/packard_bell/ms2290/hda_verb.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Vladimir Serbinenko. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License, - * or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0272, /* Codec Vendor / Device ID: Realtek ALC272X */ - 0x10250379, /* Subsystem ID */ - 0x00000006, /* Number of 4 dword sets */ - - /* NID 0x01: Subsystem ID. */ - AZALIA_SUBVENDOR(0x0, 0x10250379), - - /* NID 0x14. */ - AZALIA_PIN_CFG(0x0, 0x14, 0x99130110), - - /* NID 0x18. */ - AZALIA_PIN_CFG(0x0, 0x18, 0x03A11830), - - /* NID 0x19. */ - AZALIA_PIN_CFG(0x0, 0x19, 0x99A30920), - - /* NID 0x1D. */ - AZALIA_PIN_CFG(0x0, 0x1D, 0x4017992D), - - /* NID 0x21. */ - AZALIA_PIN_CFG(0x0, 0x21, 0x0321101F), - - 0x80862804, /* Codec Vendor / Device ID: Intel Ibexpeak HDMI. */ - 0x80860101, /* Subsystem ID */ - 0x00000004, /* Number of 4 dword sets */ - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x17aa21b5 */ - AZALIA_SUBVENDOR(0x3, 0x80860101), - - /* NID 0x04. */ - AZALIA_PIN_CFG(0x3, 0x04, 0x18560010), - - /* NID 0x05. */ - AZALIA_PIN_CFG(0x3, 0x05, 0x58560020), - - /* NID 0x06. */ - AZALIA_PIN_CFG(0x3, 0x06, 0x58560030), -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/packard_bell/ms2290/mainboard.c b/src/mainboard/packard_bell/ms2290/mainboard.c deleted file mode 100644 index c14e9b7..0000000 --- a/src/mainboard/packard_bell/ms2290/mainboard.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <northbridge/intel/nehalem/nehalem.h> -#include <southbridge/intel/bd82x6x/pch.h> -#include <ec/acpi/ec.h> - -#include <pc80/mc146818rtc.h> -#include <arch/x86/include/arch/acpigen.h> -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE -#include <drivers/intel/gma/int15.h> -#include <arch/interrupt.h> -#endif -#include <pc80/keyboard.h> -#include <cpu/x86/lapic.h> -#include <device/pci.h> -#include <smbios.h> - -static acpi_cstate_t cst_entries[] = { - {1, 1, 1000, {0x7f, 1, 2, {0}, 1, 0}}, - {2, 1, 500, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV2, 0}}, - {2, 17, 250, {0x01, 8, 0, {0}, DEFAULT_PMBASE + LV3, 0}}, -}; - -int get_cst_entries(acpi_cstate_t ** entries) -{ - *entries = cst_entries; - return ARRAY_SIZE(cst_entries); -} - - - -static void mainboard_enable(device_t dev) -{ - u16 pmbase; - - printk(BIOS_SPEW, "starting SPI configuration\n"); - - /* Configure SPI. */ - RCBA32(0x3800) = 0x07ff0500; - RCBA32(0x3804) = 0x3f046008; - RCBA32(0x3808) = 0x0058efc0; - RCBA32(0x384c) = 0x92000000; - RCBA32(0x3850) = 0x00000a0b; - RCBA32(0x3858) = 0x07ff0500; - RCBA32(0x385c) = 0x04ff0003; - RCBA32(0x3860) = 0x00020001; - RCBA32(0x3864) = 0x00000fff; - RCBA32(0x3874) = 0; - RCBA32(0x3890) = 0xf8400000; - RCBA32(0x3894) = 0x143b5006; - RCBA32(0x3898) = 0x05200302; - RCBA32(0x389c) = 0x0601209f; - RCBA32(0x38b0) = 0x00000004; - RCBA32(0x38b4) = 0x03040002; - RCBA32(0x38c0) = 0x00000007; - RCBA32(0x38c8) = 0x00002005; - RCBA32(0x38c4) = 0x00802005; - RCBA32(0x3804) = 0x3f04e008; - - printk(BIOS_SPEW, "SPI configured\n"); - - int i; - const u8 dmp[256] = { - 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x89, 0xe4, 0x30, 0x00, 0x40, 0x14, 0x00, 0x00, 0x00, 0x11, - 0x03, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a, 0x00, 0xf4, 0x01, 0x00, 0x00, 0x01, - 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x62, 0x01, 0x04, 0x00, 0x08, 0x73, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, - 0x42, 0x07, 0x09, 0x09, 0xf0, 0x00, 0x00, 0xf0, 0xa9, 0x00, 0x00, 0x06, 0x00, 0x00, 0xff, 0x00, - 0x00, 0x01, 0x00, 0x04, 0xff, 0xff, 0x00, 0x00, 0x00, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x04, 0x0b, - 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x28, 0x1b, 0x21, 0x00, 0x2c, 0x3b, 0x13, 0x00, - 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x55, 0x5a, 0x57, 0x5c, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x45, 0x00, 0x00, 0x00, - 0x52, 0x10, 0x52, 0x10, 0x64, 0x00, 0x00, 0x00, 0x74, 0x30, 0x00, 0x60, 0x00, 0x00, 0xaf, 0x0b, - 0x30, 0x45, 0x2e, 0x30, 0x38, 0x41, 0x43, 0x2e, 0x30, 0x31, 0x2e, 0x31, 0x36, 0x20, 0x00, 0x00, - }; - - for (i = 0; i < 256; i++) - ec_write (i, dmp[i]); - - pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - outl(0, pmbase + SMI_EN); - - enable_lapic(); - pci_write_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_BASE, - DEFAULT_GPIOBASE | 1); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), GPIO_CNTL, - 0x10); - - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_LFP, 2); - - /* This sneaked in here, because EasyNote has no SuperIO chip. - */ - pc_keyboard_init(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/packard_bell/ms2290/romstage.c b/src/mainboard/packard_bell/ms2290/romstage.c deleted file mode 100644 index c4a278e..0000000 --- a/src/mainboard/packard_bell/ms2290/romstage.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * Copyright (C) 2013 Vladimir Serbinenko phcoder@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* __PRE_RAM__ means: use "unsigned" for device, not a struct. */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <ec/acpi/ec.h> -#include <delay.h> -#include <timestamp.h> -#include <arch/acpi.h> -#include <cbmem.h> - -#include "arch/early_variables.h" -#include "southbridge/intel/ibexpeak/pch.h" -#include "northbridge/intel/nehalem/nehalem.h" - -#include "northbridge/intel/nehalem/raminit.h" -#include "southbridge/intel/ibexpeak/me.h" - -static void pch_enable_lpc(void) -{ - /* Enable EC, PS/2 Keyboard/Mouse */ - pci_write_config16(PCH_LPC_DEV, LPC_EN, - CNF2_LPC_EN | CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN | - COMA_LPC_EN); - - pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, (0x68 & ~3) | 0x00040001); - - pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10); - - pci_write_config32(PCH_LPC_DEV, 0xd0, 0x0); - pci_write_config32(PCH_LPC_DEV, 0xdc, 0x8); - - pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, - (pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) & ~2) | 1); - - pci_write_config32(PCH_LPC_DEV, ETR3, - pci_read_config32(PCH_LPC_DEV, ETR3) & ~ETR3_CF9GR); -} - -static void rcba_config(void) -{ - static const u32 rcba_dump3[] = { - /* 30fc */ 0x00000000, - /* 3100 */ 0x04341200, 0x00000000, 0x40043214, 0x00014321, - /* 3110 */ 0x00000002, 0x30003214, 0x00000001, 0x00000002, - /* 3120 */ 0x00000000, 0x00002321, 0x00000000, 0x00000000, - /* 3130 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3140 */ 0x00003107, 0x76543210, 0x00000010, 0x00007654, - /* 3150 */ 0x00000004, 0x00000000, 0x00000000, 0x00003210, - /* 3160 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3170 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3180 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3190 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 31f0 */ 0x00000000, 0x00000000, 0x00000000, 0x03000000, - /* 3200 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3210 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3220 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3230 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3240 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3250 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3260 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3270 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3280 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3290 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 32f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3300 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3310 */ 0x02060100, 0x0000000f, 0x01020000, 0x80000000, - /* 3320 */ 0x00000000, 0x04000000, 0x00000000, 0x00000000, - /* 3330 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3340 */ 0x000fffff, 0x00000000, 0x00000000, 0x00000000, - /* 3350 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3360 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3370 */ 0x00000000, 0x00000000, 0x7f8fdfff, 0x00000000, - /* 3380 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3390 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33a0 */ 0x00003900, 0x00000000, 0x00000000, 0x00000000, - /* 33b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33c0 */ 0x00010000, 0x00000000, 0x00000000, 0x0001004b, - /* 33d0 */ 0x06000008, 0x00010000, 0x00000000, 0x00000000, - /* 33e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 33f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3400 */ 0x0000001c, 0x00000080, 0x00000000, 0x00000000, - /* 3410 */ 0x00000c61, 0x00000000, 0x16fc1fe1, 0xbf4f001f, - /* 3420 */ 0x00000000, 0x00060010, 0x0000001d, 0x00000000, - /* 3430 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3440 */ 0xdeaddeed, 0x00000000, 0x00000000, 0x00000000, - /* 3450 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3460 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3470 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3480 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3490 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 34f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3500 */ 0x20000557, 0x2000055f, 0x2000074b, 0x2000074b, - /* 3510 */ 0x20000557, 0x2000014b, 0x2000074b, 0x2000074b, - /* 3520 */ 0x2000074b, 0x2000074b, 0x2000055f, 0x2000055f, - /* 3530 */ 0x20000557, 0x2000055f, 0x00000000, 0x00000000, - /* 3540 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3550 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3560 */ 0x00000001, 0x000026a3, 0x00040002, 0x01000052, - /* 3570 */ 0x02000772, 0x16000f8f, 0x1800ff4f, 0x0001d630, - /* 3580 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3590 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35a0 */ 0xfc000201, 0x3c000201, 0x00000000, 0x00000000, - /* 35b0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35c0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 35f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3600 */ 0x0a001f00, 0x00000000, 0x00000000, 0x00000001, - /* 3610 */ 0x00010000, 0x00000000, 0x00000000, 0x00000000, - /* 3600 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3610 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3620 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3630 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3640 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3650 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3660 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3670 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3680 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3690 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36a0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36b0 */ 0x00000000, 0x089c0018, 0x00000000, 0x00000000, - /* 36c0 */ 0x11111111, 0x00000000, 0x00000000, 0x00000000, - /* 36d0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36e0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 36f0 */ 0x00000000, 0x00000000, 0x00000000, 0x00000000, - /* 3710 */ 0x00000000, 0x4e564d49, 0x00000000, 0x00000000, - }; - unsigned i; - for (i = 0; i < sizeof(rcba_dump3) / 4; i++) { - RCBA32(4 * i + 0x30fc) = rcba_dump3[i]; - (void)RCBA32(4 * i + 0x30fc); - } -} - -static inline void write_acpi32(u32 addr, u32 val) -{ - outl(val, DEFAULT_PMBASE | addr); -} - -static inline void write_acpi16(u32 addr, u16 val) -{ - outw(val, DEFAULT_PMBASE | addr); -} - -static inline u32 read_acpi32(u32 addr) -{ - return inl(DEFAULT_PMBASE | addr); -} - -static inline u16 read_acpi16(u32 addr) -{ - return inw(DEFAULT_PMBASE | addr); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 reg32; - int s3resume = 0; - const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 }; - - timestamp_init(rdtsc ()); - - /* SERR pin is confused on reset. Clear NMI. */ - outb(4, 0x61); - outb(0, 0x61); - - timestamp_add_now(TS_START_ROMSTAGE); - - if (bist == 0) - enable_lapic(); - - nehalem_early_initialization(NEHALEM_MOBILE); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - outl (0x796bd9c3, DEFAULT_GPIOBASE); - outl (0x86fec7c2, DEFAULT_GPIOBASE + 4); - outl (0xe4e8d7fe, DEFAULT_GPIOBASE + 0xc); - outl (0, DEFAULT_GPIOBASE + 0x18); - outl (0x00004182, DEFAULT_GPIOBASE + 0x2c); - outl (0x123360f8, DEFAULT_GPIOBASE + 0x30); - outl (0x1f47bfa8, DEFAULT_GPIOBASE + 0x34); - outl (0xfffe7fb6, DEFAULT_GPIOBASE + 0x38); - - - /* This should probably go away. Until now it is required - * and mainboard specific - */ - rcba_config(); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - /* Read PM1_CNT */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32); - if (((reg32 >> 10) & 7) == 5) { - u8 reg8; - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa2); - printk(BIOS_DEBUG, "a2: %02x\n", reg8); - if (!(reg8 & 0x20)) { - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - printk(BIOS_DEBUG, "Bad resume from S3 detected.\n"); - } else { - if (acpi_s3_resume_allowed()) { - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - s3resume = 1; - } else { - printk(BIOS_DEBUG, - "Resume from S3 detected, but disabled.\n"); - } - } - } - - /* Enable SMBUS. */ - enable_smbus(); - - write_acpi16(0x2, 0x0); - write_acpi32(0x28, 0x0); - write_acpi32(0x2c, 0x0); - if (!s3resume) { - read_acpi32(0x4); - read_acpi32(0x20); - read_acpi32(0x34); - write_acpi16(0x0, 0x900); - write_acpi32(0x20, 0xffff7ffe); - write_acpi32(0x34, 0x56974); - pci_write_config8(PCH_LPC_DEV, GEN_PMCON_3, - pci_read_config8(PCH_LPC_DEV, GEN_PMCON_3) | 2); - } - - early_thermal_init(); - - timestamp_add_now(TS_BEFORE_INITRAM); - - chipset_init(s3resume); - raminit(s3resume, spd_addrmap); - - timestamp_add_now(TS_AFTER_INITRAM); - - intel_early_me_status(); - - if (s3resume) { - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - reg32 = inl(DEFAULT_PMBASE + 0x04); - outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04); - } - -#if CONFIG_HAVE_ACPI_RESUME - /* If there is no high memory area, we didn't boot before, so - * this is not a resume. In that case we just create the cbmem toc. - */ - if (s3resume) { - void *resume_backup_memory; - - resume_backup_memory = cbmem_find(CBMEM_ID_RESUME); - - /* copy 1MB - 64K to high tables ram_base to prevent memory corruption - * through stage 2. We could keep stuff like stack and heap in high tables - * memory completely, but that's a wonderful clean up task for another - * day. - */ - if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, - HIGH_MEMORY_SAVE); - - /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d); - } else { - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); - quick_ram_check(); - } -#endif - - timestamp_add_now(TS_END_ROMSTAGE); -} diff --git a/src/mainboard/packard_bell/ms2290/smihandler.c b/src/mainboard/packard_bell/ms2290/smihandler.c deleted file mode 100644 index f04ff90..0000000 --- a/src/mainboard/packard_bell/ms2290/smihandler.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <console/console.h> -#include <cpu/x86/smm.h> -#include "southbridge/intel/ibexpeak/nvs.h" -#include "southbridge/intel/ibexpeak/pch.h" -#include "southbridge/intel/ibexpeak/me.h" -#include <northbridge/intel/sandybridge/sandybridge.h> -#include <cpu/intel/model_2065x/model_2065x.h> -#include <ec/acpi/ec.h> -#include <pc80/mc146818rtc.h> -#include <delay.h> - -/* The southbridge SMI handler checks whether gnvs has a - * valid pointer before calling the trap handler - */ -extern global_nvs_t *gnvs; - -static void mainboard_smm_init(void) -{ - printk(BIOS_DEBUG, "initializing SMI\n"); -} - -int mainboard_io_trap_handler(int smif) -{ - static int smm_initialized; - - if (!smm_initialized) { - mainboard_smm_init(); - smm_initialized = 1; - } - - switch (smif) { - - default: - return 0; - } - - /* On success, the IO Trap Handler returns 1 - * On failure, the IO Trap Handler returns a value != 1 */ - return 1; -} - -void mainboard_smi_gpi(u32 gpi_sts) -{ -} - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 data) -{ - u16 pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - u8 tmp; - - printk(BIOS_DEBUG, "%s: pmbase %04X, data %02X\n", __func__, pmbase, - data); - - if (!pmbase) - return 0; - - switch (data) { - case APM_CNT_FINALIZE: - printk(BIOS_DEBUG, "APMC: FINALIZE\n"); - if (mainboard_finalized) { - printk(BIOS_DEBUG, "APMC#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_2065x_finalize_smm(); - - mainboard_finalized = 1; - break; - case APM_CNT_ACPI_ENABLE: - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x02; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - case APM_CNT_ACPI_DISABLE: - tmp = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xbb); - tmp &= ~0x03; - tmp |= 0x01; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xbb, tmp); - break; - default: - break; - } - return 0; -} diff --git a/src/mainboard/pc_engines/Kconfig b/src/mainboard/pc_engines/Kconfig index 1a38add..e10a993 100644 --- a/src/mainboard/pc_engines/Kconfig +++ b/src/mainboard/pc_engines/Kconfig @@ -3,21 +3,21 @@ if VENDOR_PC_ENGINES choice prompt "Mainboard model"
-config BOARD_PC_ENGINES_ALIX1C +config BOARD_PC_ENGINES_ALIX_1C bool "ALIX.1C" -config BOARD_PC_ENGINES_ALIX2C +config BOARD_PC_ENGINES_ALIX_2C bool "ALIX.2C2 or 2C3" -config BOARD_PC_ENGINES_ALIX2D +config BOARD_PC_ENGINES_ALIX_2D bool "ALIX.2D2 or 2D3" -config BOARD_PC_ENGINES_ALIX6 +config BOARD_PC_ENGINES_ALIX_6 bool "ALIX.6"
endchoice
-source "src/mainboard/pc_engines/alix1c/Kconfig" -source "src/mainboard/pc_engines/alix2c/Kconfig" -source "src/mainboard/pc_engines/alix2d/Kconfig" -source "src/mainboard/pc_engines/alix6/Kconfig" +source "src/mainboard/pc_engines/alix_1c/Kconfig" +source "src/mainboard/pc_engines/alix_2c/Kconfig" +source "src/mainboard/pc_engines/alix_2d/Kconfig" +source "src/mainboard/pc_engines/alix_6/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/pc_engines/alix1c/Kconfig b/src/mainboard/pc_engines/alix1c/Kconfig deleted file mode 100644 index 8d80746..0000000 --- a/src/mainboard/pc_engines/alix1c/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -if BOARD_PC_ENGINES_ALIX1C - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select SUPERIO_WINBOND_W83627HF - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_DEFAULT_DISABLE - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - -config MAINBOARD_DIR - string - default pc_engines/alix1c - -config MAINBOARD_PART_NUMBER - string - default "ALIX.1C" - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_PC_ENGINES_ALIX1C diff --git a/src/mainboard/pc_engines/alix1c/board_info.txt b/src/mainboard/pc_engines/alix1c/board_info.txt deleted file mode 100644 index 2cbb76e..0000000 --- a/src/mainboard/pc_engines/alix1c/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: half -Board URL: http://pc_engines.ch/alix1c.htm -Flashrom support: y -Vendor cooperation score: 4 -Vendor cooperation page: PC Engines ALIX.1C Vendor Cooperation Score diff --git a/src/mainboard/pc_engines/alix1c/cmos.default b/src/mainboard/pc_engines/alix1c/cmos.default deleted file mode 100644 index 189c691..0000000 --- a/src/mainboard/pc_engines/alix1c/cmos.default +++ /dev/null @@ -1,11 +0,0 @@ -boot_option=Fallback -last_boot=Fallback -ECC_memory=Disable -baud_rate=115200 -power_on_after_fail=Disable -debug_level=Spew -boot_first=HDD -boot_second=Fallback_Floppy -boot_third=Fallback_Network -boot_index=0xf -boot_countdown=0x7f diff --git a/src/mainboard/pc_engines/alix1c/cmos.layout b/src/mainboard/pc_engines/alix1c/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/pc_engines/alix1c/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/pc_engines/alix1c/devicetree.cb b/src/mainboard/pc_engines/alix1c/devicetree.cb deleted file mode 100644 index 85e967a..0000000 --- a/src/mainboard/pc_engines/alix1c/devicetree.cb +++ /dev/null @@ -1,86 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - # How to get these? Boot linux and do this: - # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x0000105a" - # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EFA5" - # mode is high 10 bits (determined from code) - register "lpc_serirq_mode" = "1" - # Don't yet know how to find this. - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "0" - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci f.0 on # ISA Bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 on end # GPIO2 - device pnp 2e.9 on end # GPIO3 - device pnp 2e.a on end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci f.1 on end # Flash controller - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end - -end - diff --git a/src/mainboard/pc_engines/alix1c/irq_tables.c b/src/mainboard/pc_engines/alix1c/irq_tables.c deleted file mode 100644 index 9ee8a07..0000000 --- a/src/mainboard/pc_engines/alix1c/irq_tables.c +++ /dev/null @@ -1,110 +0,0 @@ -/* -* This file is part of the coreboot project. -* -* Copyright (C) 2007 Advanced Micro Devices, Inc. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -/* - * ALIX1.C interrupt wiring. - * - * Devices are: - * - * 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31) - * 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block - * 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) - * 00:0e.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01) - * 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03) - * 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) - * 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01) - * 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) - * 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) - * - * The only devices that interrupt are: - * - * What Device IRQ PIN PIN WIRED TO - * ------------------------------------------------- - * AES 00:01.2 0a 01 A A - * 3VPCI 00:0c.0 0a 01 A A - * eth0 00:0d.0 0b 01 A B - * mpci 00:0e.0 0a 01 A A - * usb 00:0f.3 0b 02 B B - * usb 00:0f.4 0b 04 D D - * usb 00:0f.5 0b 04 D D - * - * The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B. - */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* Checksum */ - { - /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ - - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - - /* CPU */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* PCI (slot 1) */ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x4, 0x0}, - - /* On-board ethernet */ - {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Mini PCI (slot 2) */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, - - /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/pc_engines/alix1c/mainboard.c b/src/mainboard/pc_engines/alix1c/mainboard.c deleted file mode 100644 index 8f2031d..0000000 --- a/src/mainboard/pc_engines/alix1c/mainboard.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> - -static void init(struct device *dev) -{ - printk(BIOS_DEBUG, "ALIX1.C ENTER %s\n", __func__); - printk(BIOS_DEBUG, "ALIX1.C EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/pc_engines/alix1c/romstage.c b/src/mainboard/pc_engines/alix1c/romstage.c deleted file mode 100644 index 4f80550..0000000 --- a/src/mainboard/pc_engines/alix1c/romstage.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <lib.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include <cpu/amd/car.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* The ALIX1.C has no SMBus; the setup is hard-wired. */ -static void cs5536_enable_smbus(void) { } - -#include "southbridge/amd/cs5536/early_setup.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> - -/* The part is a Hynix hy5du121622ctp-d43. - * - * HY 5D U 12 16 2 2 C <blank> T <blank> P D43 - * Hynix - * DDR SDRAM (5D) - * VDD 2.5 VDDQ 2.5 (U) - * 512M 8K REFRESH (12) - * x16 (16) - * 4banks (2) - * SSTL_2 (2) - * 4th GEN die (C) - * Normal Power Consumption (<blank> ) - * TSOP (T) - * Single Die (<blank>) - * Lead Free (P) - * DDR400 3-3-3 (D43) - */ -/* SPD array */ -static const u8 spdbytes[] = { - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, - [SPD_BANK_DENSITY] = 0x40, - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, - [SPD_MEMORY_TYPE] = 7, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ - [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ - [SPD_NUM_BANKS_PER_SDRAM] = 4, - [SPD_PRIMARY_SDRAM_WIDTH] = 8, - [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ - [SPD_NUM_COLUMNS] = 0xa, - [SPD_NUM_ROWS] = 3, - [SPD_REFRESH] = 0x3a, - [SPD_SDRAM_CYCLE_TIME_2ND] = 60, - [SPD_SDRAM_CYCLE_TIME_3RD] = 75, - [SPD_tRAS] = 40, - [SPD_tRCD] = 15, - [SPD_tRFC] = 70, - [SPD_tRP] = 15, - [SPD_tRRD] = 10, -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - print_debug("spd_read_byte dev "); - print_debug_hex8(device); - - if (device != DIMM0) { - print_debug(" returns 0xff\n"); - return 0xff; - } - - print_debug(" addr "); - print_debug_hex8(address); - print_debug(" returns "); - print_debug_hex8(spdbytes[address]); - print_debug("\n"); - - return spdbytes[address]; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0}}, - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: Must do this AFTER cs5536_early_setup()! - * It is counting on some early MSR setup for the CS5536. - */ - cs5536_disable_internal_uart(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Switch from Cache as RAM to real RAM. - * - * There are two ways we could think about this. - * - * 1. If we are using the romstage.inc ROMCC way, the stack is - * going to be re-setup in the code following this code. Just - * wbinvd the stack to clear the cache tags. We don't care - * where the stack used to be. - * - * 2. This file is built as a normal .c -> .o and linked in - * etc. The stack might be used to return etc. That means we - * care about what is in the stack. If we are smart we set - * the CAR stack to the same location as the rest of - * coreboot. If that is the case we can just do a wbinvd. - * The stack will be written into real RAM that is now setup - * and we continue like nothing happened. If the stack is - * located somewhere other than where LB would like it, you - * need to write some code to do a copy from cache to RAM - * - * We use method 1 on Norwich and on this board too. - */ - post_code(0x02); - print_err("POST 02\n"); - __asm__("wbinvd\n"); - print_err("Past wbinvd\n"); - - /* We are finding the return does not work on this board. Explicitly - * call the label that is after the call to us. This is gross, but - * sometimes at this level it is the only way out. - */ - done_cache_as_ram_main(); -} diff --git a/src/mainboard/pc_engines/alix2c/Kconfig b/src/mainboard/pc_engines/alix2c/Kconfig deleted file mode 100644 index 24a9772..0000000 --- a/src/mainboard/pc_engines/alix2c/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_PC_ENGINES_ALIX2C - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "ALIX.2C" - -endif diff --git a/src/mainboard/pc_engines/alix2c/board_info.txt b/src/mainboard/pc_engines/alix2c/board_info.txt deleted file mode 100644 index 429c1e5..0000000 --- a/src/mainboard/pc_engines/alix2c/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: half -Board URL: http://pc_engines.ch/alix2c3.htm -Flashrom support: y -Clone of: pc_engines/alix2d diff --git a/src/mainboard/pc_engines/alix2d/Kconfig b/src/mainboard/pc_engines/alix2d/Kconfig deleted file mode 100644 index f9cfec2..0000000 --- a/src/mainboard/pc_engines/alix2d/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -if BOARD_PC_ENGINES_ALIX2C || BOARD_PC_ENGINES_ALIX2D || BOARD_PC_ENGINES_ALIX6 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_LX - select NORTHBRIDGE_AMD_LX - select SOUTHBRIDGE_AMD_CS5536 - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_512 - select POWER_BUTTON_FORCE_DISABLE - -config MAINBOARD_DIR - string - default pc_engines/alix2d - -if BOARD_PC_ENGINES_ALIX2D - -config MAINBOARD_PART_NUMBER - string - default "ALIX.2D" - -endif - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_PC_ENGINES_ALIX2C || BOARD_PC_ENGINES_ALIX2D || BOARD_PC_ENGINES_ALIX6 diff --git a/src/mainboard/pc_engines/alix2d/board_info.txt b/src/mainboard/pc_engines/alix2d/board_info.txt deleted file mode 100644 index f52967f..0000000 --- a/src/mainboard/pc_engines/alix2d/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: half -Board URL: http://pc_engines.ch/alix2d0.htm -Flashrom support: y diff --git a/src/mainboard/pc_engines/alix2d/cmos.layout b/src/mainboard/pc_engines/alix2d/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/pc_engines/alix2d/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/pc_engines/alix2d/devicetree.cb b/src/mainboard/pc_engines/alix2d/devicetree.cb deleted file mode 100644 index d8aa3bc..0000000 --- a/src/mainboard/pc_engines/alix2d/devicetree.cb +++ /dev/null @@ -1,46 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - # How to get these? Boot linux and do this: - # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x00001002" - # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EFFD" - # mode is high 10 bits (determined from code) - register "lpc_serirq_mode" = "1" - # Don't yet know how to find this. - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "1" # Wired on Alix.2D13 only - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0x80000900" # Disable VGA controller (not wired) - register "unwanted_vpci[1]" = "0x80007B00" # Disable AC97 controller (not wired) - register "unwanted_vpci[2]" = "0" # End of list has a zero - device pci f.0 on end # ISA Bridge - device pci f.1 on end # Flash controller - device pci f.2 on end # IDE controller - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end - -end - diff --git a/src/mainboard/pc_engines/alix2d/irq_tables.c b/src/mainboard/pc_engines/alix2d/irq_tables.c deleted file mode 100644 index cdfaa88..0000000 --- a/src/mainboard/pc_engines/alix2d/irq_tables.c +++ /dev/null @@ -1,117 +0,0 @@ -/* -* This file is part of the coreboot project. -* -* Copyright (C) 2007 Advanced Micro Devices, Inc. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <arch/io.h> -#include "southbridge/amd/cs5536/cs5536.h" - -/* Platform IRQs */ -#define PIRQA 11 -#define PIRQB 10 -#define PIRQC 11 -#define PIRQD 9 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -/* - * ALIX.2D3 interrupt wiring. - * - * Devices are: - * 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) - * 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] - * 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) - * 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) - * 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) - * 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) - * 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) - - * The only devices that interrupt are: - * - * What Device IRQ PIN PIN WIRED TO - * ------------------------------------------------- - * AES 00:01.2 0a 01 A A - * eth0 00:09.0 0b 01 A B - * eth1 00:0a.0 0b 01 A C - * eth2 00:0b.0 0b 01 A D - * mpci 00:0c.0 0a 01 A A - * mpci 00:0c.0 0b 02 B B - * usb 00:0f.4 0b 04 D D - * usb 00:0f.5 0b 04 D D - * - * The only swizzled interrupts are the ethernet controllers, where INTA is wired to - * interrupt controller lines B, C and D. - */ - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - 0x100B, /* Vendor */ - 0x002B, /* Device */ - 0, /* Miniport data */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0x00, /* Checksum */ - { - /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ - - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - - /* CPU */ - {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Left) */ - {0x00, (0x09 << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Middle, ALIX.2D3 only) */ - {0x00, (0x0A << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* On-board ethernet (Right) */ - {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Mini PCI (slot 1) */ - {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Mini PCI (slot 2, ALIX.2D2 only) */ - {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, - - /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ - {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/pc_engines/alix2d/mainboard.c b/src/mainboard/pc_engines/alix2d/mainboard.c deleted file mode 100644 index 3cd08c8..0000000 --- a/src/mainboard/pc_engines/alix2d/mainboard.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> - -static void init(struct device *dev) -{ - printk(BIOS_DEBUG, "ALIX.2D ENTER %s\n", __func__); - printk(BIOS_DEBUG, "ALIX.2D EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/pc_engines/alix2d/romstage.c b/src/mainboard/pc_engines/alix2d/romstage.c deleted file mode 100644 index 52c5310..0000000 --- a/src/mainboard/pc_engines/alix2d/romstage.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <spd.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <lib.h> -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include <cpu/amd/lxdef.h> -#include <cpu/amd/car.h> -#include "southbridge/amd/cs5536/cs5536.h" -#include "northbridge/amd/lx/raminit.h" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -/* The ALIX.2D has no SMBus; the setup is hard-wired. */ -static void cs5536_enable_smbus(void) { } - -#include "southbridge/amd/cs5536/early_setup.c" - -/* The part is a Hynix hy5du121622ctp-d43. - * - * HY 5D U 12 16 2 2 C <blank> T <blank> P D43 - * Hynix - * DDR SDRAM (5D) - * VDD 2.5 VDDQ 2.5 (U) - * 512M 8K REFRESH (12) - * x16 (16) - * 4banks (2) - * SSTL_2 (2) - * 4th GEN die (C) - * Normal Power Consumption (<blank> ) - * TSOP (T) - * Single Die (<blank>) - * Lead Free (P) - * DDR400 3-3-3 (D43) - */ -/* SPD array */ -static const u8 spdbytes[] = { - [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, - [SPD_BANK_DENSITY] = 0x40, - [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, - [SPD_MEMORY_TYPE] = 7, - [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ - [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ - [SPD_NUM_BANKS_PER_SDRAM] = 4, - [SPD_PRIMARY_SDRAM_WIDTH] = 8, - [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ - [SPD_NUM_COLUMNS] = 0xa, - [SPD_NUM_ROWS] = 3, - [SPD_REFRESH] = 0x3a, - [SPD_SDRAM_CYCLE_TIME_2ND] = 60, - [SPD_SDRAM_CYCLE_TIME_3RD] = 75, - [SPD_tRAS] = 40, - [SPD_tRCD] = 15, - [SPD_tRFC] = 70, - [SPD_tRP] = 15, - [SPD_tRRD] = 10, -}; - -int spd_read_byte(unsigned int device, unsigned int address) -{ - print_debug("spd_read_byte dev "); - print_debug_hex8(device); - - if (device != DIMM0) { - print_debug(" returns 0xff\n"); - return 0xff; - } - - print_debug(" addr "); - print_debug_hex8(address); - print_debug(" returns "); - print_debug_hex8(spdbytes[address]); - print_debug("\n"); - - return spdbytes[address]; -} - -#include "northbridge/amd/lx/pll_reset.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/geode_lx/cpureginit.c" -#include "cpu/amd/geode_lx/syspreinit.c" -#include "cpu/amd/geode_lx/msrinit.c" - -/** Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - /* - * Enable LEDs GPIO outputs to light up the leds - * This is how the original tinyBIOS sets them after boot. - * Info: GPIO_IO_BASE, 0x6100, is only valid before PCI init, so it - * may be used here, but not after PCI Init. - * Note: Prior to a certain release, Linux used a hardwired 0x6100 in the - * leds-alix2.c driver. Coreboot dynamically assigns this space, - * so the driver does not work anymore. - * Good workaround: use the newer driver - * Ugly workaround: $ wrmsr 0x5140000C 0xf00100006100 - * This resets the GPIO I/O space to 0x6100. - * This may break other things, though. - */ - outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); - outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); - outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); - - /* outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_VALUE); */ /* Led 1 enabled */ - outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */ - outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 3 disabled */ -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - static const struct mem_controller memctrl[] = { - {.channel0 = {DIMM0}}, - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* NOTE: Must do this AFTER cs5536_early_setup()! - * It is counting on some early MSR setup for the CS5536. - */ - cs5536_setup_onchipuart(1); - mb_gpio_init(); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pll_reset(); - - cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); - - sdram_initialize(1, memctrl); - - /* Switch from Cache as RAM to real RAM. - * - * There are two ways we could think about this. - * - * 1. If we are using the romstage.inc ROMCC way, the stack is - * going to be re-setup in the code following this code. Just - * wbinvd the stack to clear the cache tags. We don't care - * where the stack used to be. - * - * 2. This file is built as a normal .c -> .o and linked in - * etc. The stack might be used to return etc. That means we - * care about what is in the stack. If we are smart we set - * the CAR stack to the same location as the rest of - * coreboot. If that is the case we can just do a wbinvd. - * The stack will be written into real RAM that is now setup - * and we continue like nothing happened. If the stack is - * located somewhere other than where LB would like it, you - * need to write some code to do a copy from cache to RAM - * - * We use method 1 on Norwich and on this board too. - */ - post_code(0x02); - print_err("POST 02\n"); - __asm__("wbinvd\n"); - print_err("Past wbinvd\n"); - - /* We are finding the return does not work on this board. Explicitly - * call the label that is after the call to us. This is gross, but - * sometimes at this level it is the only way out. - */ - done_cache_as_ram_main(); -} diff --git a/src/mainboard/pc_engines/alix6/Kconfig b/src/mainboard/pc_engines/alix6/Kconfig deleted file mode 100644 index 7432a42..0000000 --- a/src/mainboard/pc_engines/alix6/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_PC_ENGINES_ALIX6 - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "ALIX.6" - -endif diff --git a/src/mainboard/pc_engines/alix6/board_info.txt b/src/mainboard/pc_engines/alix6/board_info.txt deleted file mode 100644 index 32acd41..0000000 --- a/src/mainboard/pc_engines/alix6/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: half -Board URL: http://pc_engines.ch/alix6f2.htm -Flashrom support: y -Clone of: pc_engines/alix2d - diff --git a/src/mainboard/pc_engines/alix_1c/Kconfig b/src/mainboard/pc_engines/alix_1c/Kconfig new file mode 100644 index 0000000..ba355f9 --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/Kconfig @@ -0,0 +1,29 @@ +if BOARD_PC_ENGINES_ALIX_1C + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select SUPERIO_WINBOND_W83627HF + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_DEFAULT_DISABLE + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + +config MAINBOARD_DIR + string + default pc_engines/alix_1c + +config MAINBOARD_PART_NUMBER + string + default "ALIX.1C" + +config IRQ_SLOT_COUNT + int + default 5 + +endif # BOARD_PC_ENGINES_ALIX_1C diff --git a/src/mainboard/pc_engines/alix_1c/board_info.txt b/src/mainboard/pc_engines/alix_1c/board_info.txt new file mode 100644 index 0000000..2cbb76e --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/board_info.txt @@ -0,0 +1,5 @@ +Category: half +Board URL: http://pc_engines.ch/alix1c.htm +Flashrom support: y +Vendor cooperation score: 4 +Vendor cooperation page: PC Engines ALIX.1C Vendor Cooperation Score diff --git a/src/mainboard/pc_engines/alix_1c/cmos.default b/src/mainboard/pc_engines/alix_1c/cmos.default new file mode 100644 index 0000000..189c691 --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/cmos.default @@ -0,0 +1,11 @@ +boot_option=Fallback +last_boot=Fallback +ECC_memory=Disable +baud_rate=115200 +power_on_after_fail=Disable +debug_level=Spew +boot_first=HDD +boot_second=Fallback_Floppy +boot_third=Fallback_Network +boot_index=0xf +boot_countdown=0x7f diff --git a/src/mainboard/pc_engines/alix_1c/cmos.layout b/src/mainboard/pc_engines/alix_1c/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/pc_engines/alix_1c/devicetree.cb b/src/mainboard/pc_engines/alix_1c/devicetree.cb new file mode 100644 index 0000000..85e967a --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/devicetree.cb @@ -0,0 +1,86 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x0000105a" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFA5" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "0" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "0" + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0" # End of list has a zero + device pci f.0 on # ISA Bridge + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 on end # GPIO2 + device pnp 2e.9 on end # GPIO3 + device pnp 2e.a on end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.3 on end # Audio + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end + +end + diff --git a/src/mainboard/pc_engines/alix_1c/irq_tables.c b/src/mainboard/pc_engines/alix_1c/irq_tables.c new file mode 100644 index 0000000..9ee8a07 --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/irq_tables.c @@ -0,0 +1,110 @@ +/* +* This file is part of the coreboot project. +* +* Copyright (C) 2007 Advanced Micro Devices, Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 9 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +/* + * ALIX1.C interrupt wiring. + * + * Devices are: + * + * 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31) + * 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block + * 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96) + * 00:0e.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01) + * 00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03) + * 00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) + * 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01) + * 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) + * 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) + * + * The only devices that interrupt are: + * + * What Device IRQ PIN PIN WIRED TO + * ------------------------------------------------- + * AES 00:01.2 0a 01 A A + * 3VPCI 00:0c.0 0a 01 A A + * eth0 00:0d.0 0b 01 A B + * mpci 00:0e.0 0a 01 A A + * usb 00:0f.3 0b 02 B B + * usb 00:0f.4 0b 04 D D + * usb 00:0f.5 0b 04 D D + * + * The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B. + */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x00, /* Checksum */ + { + /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ + + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + + /* CPU */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* PCI (slot 1) */ + {0x00, (0x0C << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x4, 0x0}, + + /* On-board ethernet */ + {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Mini PCI (slot 2) */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, + + /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/pc_engines/alix_1c/mainboard.c b/src/mainboard/pc_engines/alix_1c/mainboard.c new file mode 100644 index 0000000..8f2031d --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/mainboard.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> + +static void init(struct device *dev) +{ + printk(BIOS_DEBUG, "ALIX1.C ENTER %s\n", __func__); + printk(BIOS_DEBUG, "ALIX1.C EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/pc_engines/alix_1c/romstage.c b/src/mainboard/pc_engines/alix_1c/romstage.c new file mode 100644 index 0000000..4f80550 --- /dev/null +++ b/src/mainboard/pc_engines/alix_1c/romstage.c @@ -0,0 +1,169 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <spd.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <lib.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include <cpu/amd/car.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* The ALIX1.C has no SMBus; the setup is hard-wired. */ +static void cs5536_enable_smbus(void) { } + +#include "southbridge/amd/cs5536/early_setup.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> + +/* The part is a Hynix hy5du121622ctp-d43. + * + * HY 5D U 12 16 2 2 C <blank> T <blank> P D43 + * Hynix + * DDR SDRAM (5D) + * VDD 2.5 VDDQ 2.5 (U) + * 512M 8K REFRESH (12) + * x16 (16) + * 4banks (2) + * SSTL_2 (2) + * 4th GEN die (C) + * Normal Power Consumption (<blank> ) + * TSOP (T) + * Single Die (<blank>) + * Lead Free (P) + * DDR400 3-3-3 (D43) + */ +/* SPD array */ +static const u8 spdbytes[] = { + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, + [SPD_BANK_DENSITY] = 0x40, + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, + [SPD_MEMORY_TYPE] = 7, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ + [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ + [SPD_NUM_BANKS_PER_SDRAM] = 4, + [SPD_PRIMARY_SDRAM_WIDTH] = 8, + [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ + [SPD_NUM_COLUMNS] = 0xa, + [SPD_NUM_ROWS] = 3, + [SPD_REFRESH] = 0x3a, + [SPD_SDRAM_CYCLE_TIME_2ND] = 60, + [SPD_SDRAM_CYCLE_TIME_3RD] = 75, + [SPD_tRAS] = 40, + [SPD_tRCD] = 15, + [SPD_tRFC] = 70, + [SPD_tRP] = 15, + [SPD_tRRD] = 10, +}; + +int spd_read_byte(unsigned int device, unsigned int address) +{ + print_debug("spd_read_byte dev "); + print_debug_hex8(device); + + if (device != DIMM0) { + print_debug(" returns 0xff\n"); + return 0xff; + } + + print_debug(" addr "); + print_debug_hex8(address); + print_debug(" returns "); + print_debug_hex8(spdbytes[address]); + print_debug("\n"); + + return spdbytes[address]; +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0}}, + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* NOTE: Must do this AFTER cs5536_early_setup()! + * It is counting on some early MSR setup for the CS5536. + */ + cs5536_disable_internal_uart(); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Switch from Cache as RAM to real RAM. + * + * There are two ways we could think about this. + * + * 1. If we are using the romstage.inc ROMCC way, the stack is + * going to be re-setup in the code following this code. Just + * wbinvd the stack to clear the cache tags. We don't care + * where the stack used to be. + * + * 2. This file is built as a normal .c -> .o and linked in + * etc. The stack might be used to return etc. That means we + * care about what is in the stack. If we are smart we set + * the CAR stack to the same location as the rest of + * coreboot. If that is the case we can just do a wbinvd. + * The stack will be written into real RAM that is now setup + * and we continue like nothing happened. If the stack is + * located somewhere other than where LB would like it, you + * need to write some code to do a copy from cache to RAM + * + * We use method 1 on Norwich and on this board too. + */ + post_code(0x02); + print_err("POST 02\n"); + __asm__("wbinvd\n"); + print_err("Past wbinvd\n"); + + /* We are finding the return does not work on this board. Explicitly + * call the label that is after the call to us. This is gross, but + * sometimes at this level it is the only way out. + */ + done_cache_as_ram_main(); +} diff --git a/src/mainboard/pc_engines/alix_2c/Kconfig b/src/mainboard/pc_engines/alix_2c/Kconfig new file mode 100644 index 0000000..b0971a7 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2c/Kconfig @@ -0,0 +1,9 @@ +if BOARD_PC_ENGINES_ALIX_2C + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "ALIX.2C" + +endif diff --git a/src/mainboard/pc_engines/alix_2c/board_info.txt b/src/mainboard/pc_engines/alix_2c/board_info.txt new file mode 100644 index 0000000..bccb3f6 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2c/board_info.txt @@ -0,0 +1,4 @@ +Category: half +Board URL: http://pc_engines.ch/alix2c3.htm +Flashrom support: y +Clone of: pc_engines/alix_2d diff --git a/src/mainboard/pc_engines/alix_2d/Kconfig b/src/mainboard/pc_engines/alix_2d/Kconfig new file mode 100644 index 0000000..2469b95 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/Kconfig @@ -0,0 +1,30 @@ +if BOARD_PC_ENGINES_ALIX_2C || BOARD_PC_ENGINES_ALIX_2D || BOARD_PC_ENGINES_ALIX_6 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_GEODE_LX + select NORTHBRIDGE_AMD_LX + select SOUTHBRIDGE_AMD_CS5536 + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_512 + select POWER_BUTTON_FORCE_DISABLE + +config MAINBOARD_DIR + string + default pc_engines/alix_2d + +if BOARD_PC_ENGINES_ALIX_2D + +config MAINBOARD_PART_NUMBER + string + default "ALIX.2D" + +endif + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_PC_ENGINES_ALIX_2C || BOARD_PC_ENGINES_ALIX_2D || BOARD_PC_ENGINES_ALIX_6 diff --git a/src/mainboard/pc_engines/alix_2d/board_info.txt b/src/mainboard/pc_engines/alix_2d/board_info.txt new file mode 100644 index 0000000..f52967f --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/board_info.txt @@ -0,0 +1,3 @@ +Category: half +Board URL: http://pc_engines.ch/alix2d0.htm +Flashrom support: y diff --git a/src/mainboard/pc_engines/alix_2d/cmos.layout b/src/mainboard/pc_engines/alix_2d/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/pc_engines/alix_2d/devicetree.cb b/src/mainboard/pc_engines/alix_2d/devicetree.cb new file mode 100644 index 0000000..d8aa3bc --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/devicetree.cb @@ -0,0 +1,46 @@ +chip northbridge/amd/lx + device domain 0 on + device pci 1.0 on end + device pci 1.1 on end + chip southbridge/amd/cs5536 + # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK + # SIRQ Mode = Active(Quiet) mode. Save power.... + # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK + # How to get these? Boot linux and do this: + # rdmsr 0x51400025 + register "lpc_serirq_enable" = "0x00001002" + # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits + register "lpc_serirq_polarity" = "0x0000EFFD" + # mode is high 10 bits (determined from code) + register "lpc_serirq_mode" = "1" + # Don't yet know how to find this. + register "enable_gpio_int_route" = "0x0D0C0700" + register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash + register "enable_USBP4_device" = "0" #0: host, 1:device + register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) + register "com1_enable" = "1" + register "com1_address" = "0x3F8" + register "com1_irq" = "4" + register "com2_enable" = "1" # Wired on Alix.2D13 only + register "com2_address" = "0x2F8" + register "com2_irq" = "3" + register "unwanted_vpci[0]" = "0x80000900" # Disable VGA controller (not wired) + register "unwanted_vpci[1]" = "0x80007B00" # Disable AC97 controller (not wired) + register "unwanted_vpci[2]" = "0" # End of list has a zero + device pci f.0 on end # ISA Bridge + device pci f.1 on end # Flash controller + device pci f.2 on end # IDE controller + device pci f.4 on end # OHCI + device pci f.5 on end # EHCI + end + end + + # APIC cluster is late CPU init. + device cpu_cluster 0 on + chip cpu/amd/geode_lx + device lapic 0 on end + end + end + +end + diff --git a/src/mainboard/pc_engines/alix_2d/irq_tables.c b/src/mainboard/pc_engines/alix_2d/irq_tables.c new file mode 100644 index 0000000..cdfaa88 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/irq_tables.c @@ -0,0 +1,117 @@ +/* +* This file is part of the coreboot project. +* +* Copyright (C) 2007 Advanced Micro Devices, Inc. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <arch/io.h> +#include "southbridge/amd/cs5536/cs5536.h" + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 10 +#define PIRQC 11 +#define PIRQD 9 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +/* + * ALIX.2D3 interrupt wiring. + * + * Devices are: + * 00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 33) + * 00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD] Geode LX AES Security Block [1022:2082] + * 00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0b.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96) + * 00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) + * 00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) + * 00:0f.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) + * 00:0f.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) + + * The only devices that interrupt are: + * + * What Device IRQ PIN PIN WIRED TO + * ------------------------------------------------- + * AES 00:01.2 0a 01 A A + * eth0 00:09.0 0b 01 A B + * eth1 00:0a.0 0b 01 A C + * eth2 00:0b.0 0b 01 A D + * mpci 00:0c.0 0a 01 A A + * mpci 00:0c.0 0b 02 B B + * usb 00:0f.4 0b 04 D D + * usb 00:0f.5 0b 04 D D + * + * The only swizzled interrupts are the ethernet controllers, where INTA is wired to + * interrupt controller lines B, C and D. + */ + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x100B, /* Vendor */ + 0x002B, /* Device */ + 0, /* Miniport data */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0x00, /* Checksum */ + { + /* If you change the number of entries, change CONFIG_IRQ_SLOT_COUNT above! */ + + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + + /* CPU */ + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Left) */ + {0x00, (0x09 << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Middle, ALIX.2D3 only) */ + {0x00, (0x0A << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* On-board ethernet (Right) */ + {0x00, (0x0B << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Mini PCI (slot 1) */ + {0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Mini PCI (slot 2, ALIX.2D2 only) */ + {0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + + /* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */ + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/pc_engines/alix_2d/mainboard.c b/src/mainboard/pc_engines/alix_2d/mainboard.c new file mode 100644 index 0000000..3cd08c8 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/mainboard.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> + +static void init(struct device *dev) +{ + printk(BIOS_DEBUG, "ALIX.2D ENTER %s\n", __func__); + printk(BIOS_DEBUG, "ALIX.2D EXIT %s\n", __func__); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = init; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/pc_engines/alix_2d/romstage.c b/src/mainboard/pc_engines/alix_2d/romstage.c new file mode 100644 index 0000000..52c5310 --- /dev/null +++ b/src/mainboard/pc_engines/alix_2d/romstage.c @@ -0,0 +1,192 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <spd.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <lib.h> +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include <cpu/amd/lxdef.h> +#include <cpu/amd/car.h> +#include "southbridge/amd/cs5536/cs5536.h" +#include "northbridge/amd/lx/raminit.h" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* The ALIX.2D has no SMBus; the setup is hard-wired. */ +static void cs5536_enable_smbus(void) { } + +#include "southbridge/amd/cs5536/early_setup.c" + +/* The part is a Hynix hy5du121622ctp-d43. + * + * HY 5D U 12 16 2 2 C <blank> T <blank> P D43 + * Hynix + * DDR SDRAM (5D) + * VDD 2.5 VDDQ 2.5 (U) + * 512M 8K REFRESH (12) + * x16 (16) + * 4banks (2) + * SSTL_2 (2) + * 4th GEN die (C) + * Normal Power Consumption (<blank> ) + * TSOP (T) + * Single Die (<blank>) + * Lead Free (P) + * DDR400 3-3-3 (D43) + */ +/* SPD array */ +static const u8 spdbytes[] = { + [SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10, + [SPD_BANK_DENSITY] = 0x40, + [SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff, + [SPD_MEMORY_TYPE] = 7, + [SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */ + [SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */ + [SPD_NUM_BANKS_PER_SDRAM] = 4, + [SPD_PRIMARY_SDRAM_WIDTH] = 8, + [SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */ + [SPD_NUM_COLUMNS] = 0xa, + [SPD_NUM_ROWS] = 3, + [SPD_REFRESH] = 0x3a, + [SPD_SDRAM_CYCLE_TIME_2ND] = 60, + [SPD_SDRAM_CYCLE_TIME_3RD] = 75, + [SPD_tRAS] = 40, + [SPD_tRCD] = 15, + [SPD_tRFC] = 70, + [SPD_tRP] = 15, + [SPD_tRRD] = 10, +}; + +int spd_read_byte(unsigned int device, unsigned int address) +{ + print_debug("spd_read_byte dev "); + print_debug_hex8(device); + + if (device != DIMM0) { + print_debug(" returns 0xff\n"); + return 0xff; + } + + print_debug(" addr "); + print_debug_hex8(address); + print_debug(" returns "); + print_debug_hex8(spdbytes[address]); + print_debug("\n"); + + return spdbytes[address]; +} + +#include "northbridge/amd/lx/pll_reset.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/geode_lx/cpureginit.c" +#include "cpu/amd/geode_lx/syspreinit.c" +#include "cpu/amd/geode_lx/msrinit.c" + +/** Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + /* + * Enable LEDs GPIO outputs to light up the leds + * This is how the original tinyBIOS sets them after boot. + * Info: GPIO_IO_BASE, 0x6100, is only valid before PCI init, so it + * may be used here, but not after PCI Init. + * Note: Prior to a certain release, Linux used a hardwired 0x6100 in the + * leds-alix2.c driver. Coreboot dynamically assigns this space, + * so the driver does not work anymore. + * Good workaround: use the newer driver + * Ugly workaround: $ wrmsr 0x5140000C 0xf00100006100 + * This resets the GPIO I/O space to 0x6100. + * This may break other things, though. + */ + outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); + outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); + outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); + + /* outl(1 << 6, GPIO_IO_BASE + GPIOL_OUTPUT_VALUE); */ /* Led 1 enabled */ + outl(1 << 9, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 2 disabled */ + outl(1 << 11, GPIO_IO_BASE + GPIOH_OUTPUT_VALUE); /* Led 3 disabled */ +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + static const struct mem_controller memctrl[] = { + {.channel0 = {DIMM0}}, + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* NOTE: Must do this AFTER cs5536_early_setup()! + * It is counting on some early MSR setup for the CS5536. + */ + cs5536_setup_onchipuart(1); + mb_gpio_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + pll_reset(); + + cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED); + + sdram_initialize(1, memctrl); + + /* Switch from Cache as RAM to real RAM. + * + * There are two ways we could think about this. + * + * 1. If we are using the romstage.inc ROMCC way, the stack is + * going to be re-setup in the code following this code. Just + * wbinvd the stack to clear the cache tags. We don't care + * where the stack used to be. + * + * 2. This file is built as a normal .c -> .o and linked in + * etc. The stack might be used to return etc. That means we + * care about what is in the stack. If we are smart we set + * the CAR stack to the same location as the rest of + * coreboot. If that is the case we can just do a wbinvd. + * The stack will be written into real RAM that is now setup + * and we continue like nothing happened. If the stack is + * located somewhere other than where LB would like it, you + * need to write some code to do a copy from cache to RAM + * + * We use method 1 on Norwich and on this board too. + */ + post_code(0x02); + print_err("POST 02\n"); + __asm__("wbinvd\n"); + print_err("Past wbinvd\n"); + + /* We are finding the return does not work on this board. Explicitly + * call the label that is after the call to us. This is gross, but + * sometimes at this level it is the only way out. + */ + done_cache_as_ram_main(); +} diff --git a/src/mainboard/pc_engines/alix_6/Kconfig b/src/mainboard/pc_engines/alix_6/Kconfig new file mode 100644 index 0000000..5b29c9e --- /dev/null +++ b/src/mainboard/pc_engines/alix_6/Kconfig @@ -0,0 +1,9 @@ +if BOARD_PC_ENGINES_ALIX_6 + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "ALIX.6" + +endif diff --git a/src/mainboard/pc_engines/alix_6/board_info.txt b/src/mainboard/pc_engines/alix_6/board_info.txt new file mode 100644 index 0000000..321b637 --- /dev/null +++ b/src/mainboard/pc_engines/alix_6/board_info.txt @@ -0,0 +1,5 @@ +Category: half +Board URL: http://pc_engines.ch/alix6f2.htm +Flashrom support: y +Clone of: pc_engines/alix_2d + diff --git a/src/mainboard/siemens/Kconfig b/src/mainboard/siemens/Kconfig index f03f822..8e5c3d4 100644 --- a/src/mainboard/siemens/Kconfig +++ b/src/mainboard/siemens/Kconfig @@ -3,12 +3,12 @@ if VENDOR_SIEMENS choice prompt "Mainboard model"
-config BOARD_SIEMENS_SITEMP_G1P1 +config BOARD_SIEMENS_MB_SITEMP_G1_U1P0_U1P1 bool "MB SITEMP-G1 (U1P0/U1P1)"
endchoice
-source "src/mainboard/siemens/sitemp_g1p1/Kconfig" +source "src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Kconfig b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Kconfig new file mode 100644 index 0000000..18a6c9e --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Kconfig @@ -0,0 +1,74 @@ +if BOARD_SIEMENS_MB_SITEMP_G1_U1P0_U1P1 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_S1G1 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_RS690 + select SOUTHBRIDGE_AMD_SB600 + select SUPERIO_ITE_IT8712F + select HAVE_ACPI_TABLES + select HAVE_MP_TABLE + select HAVE_PIRQ_TABLE + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select BOARD_ROMSIZE_KB_1024 + select QRANK_DIMM_SUPPORT + select SET_FIDVID + select GFXUMA + select EXT_CONF_SUPPORT + +config MAINBOARD_DIR + string + default siemens/mb_sitemp_g1_u1p0_u1p1 + +config LINT01_CONVERSION + bool + default y + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "MB SITEMP-G1 (U1P0/U1P1)" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config IOMMU + bool + default n + +config HW_SCRUBBER + bool + default n + +config ECC_MEMORY + bool + default n + +endif # BOARD_SIEMENS_MB_SITEMP_G1_U1P0_U1P1 diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Makefile.inc b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Makefile.inc new file mode 100644 index 0000000..c6e9706 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## Copyright (C) 2010 Siemens AG, Inc. +## (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +ramstage-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += int15_func.c diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/debug.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/debug.asl new file mode 100644 index 0000000..00e10b8 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/debug.asl @@ -0,0 +1,198 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + DefinitionBlock ( + "DSDT.AML", + "DSDT", + 0x01, + "XXXXXX", + "XXXXXXXX", + 0x00010001 + ) + { + #include "debug.asl" + } +*/ + +/* +* 0x80: POST_BASE +* 0x3F8: DEBCOM_BASE +* X80: POST_REGION +* P80: PORT80 +* +* CREG: DEBCOM_REGION +* CUAR: DEBCOM_UART +* CDAT: DEBCOM_DATA +* CDLM: DEBCOM_DLM +* DLCR: DEBCOM_LCR +* CMCR: DEBCOM_MCR +* CLSR: DEBCOM_LSR +* +* DEBUG_INIT DINI +*/ + +OperationRegion(X80, SystemIO, 0x80, 1) + Field(X80, ByteAcc, NoLock, Preserve) +{ + P80, 8 +} + +OperationRegion(CREG, SystemIO, 0x3F8, 8) + Field(CREG, ByteAcc, NoLock, Preserve) +{ + CDAT, 8, + CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8 +} + +/* +* DINI +* Initialize the COM port to 115,200 8-N-1 +*/ +Method(DINI) +{ + store(0x83, DLCR) + store(0x01, CDAT) /* 115200 baud (low) */ + store(0x00, CDLM) /* 115200 baud (high) */ + store(0x03, DLCR) /* word=8 stop=1 parity=none */ + store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */ + store(0x00, CDLM) /* turn off interrupts */ +} + +/* +* THRE +* Wait for COM port transmitter holding register to go empty +*/ +Method(THRE) +{ + and(CLSR, 0x20, local0) + while (Lequal(local0, Zero)) { + and(CLSR, 0x20, local0) + } +} + +/* +* OUTX +* Send a single raw character +*/ +Method(OUTX, 1) +{ + THRE() + store(Arg0, CDAT) +} + +/* +* OUTC +* Send a single character, expanding LF into CR/LF +*/ +Method(OUTC, 1) +{ + if (LEqual(Arg0, 0x0a)) { + OUTX(0x0d) + } + OUTX(Arg0) +} + +/* +* DBGN +* Send a single hex nibble +*/ +Method(DBGN, 1) +{ + and(Arg0, 0x0f, Local0) + if (LLess(Local0, 10)) { + add(Local0, 0x30, Local0) + } else { + add(Local0, 0x37, Local0) + } + OUTC(Local0) +} + +/* +* DBGB +* Send a hex byte +*/ +Method(DBGB, 1) +{ + ShiftRight(Arg0, 4, Local0) + DBGN(Local0) + DBGN(Arg0) +} + +/* +* DBGW +* Send a hex word +*/ +Method(DBGW, 1) +{ + ShiftRight(Arg0, 8, Local0) + DBGB(Local0) + DBGB(Arg0) +} + +/* +* DBGD +* Send a hex Dword +*/ +Method(DBGD, 1) +{ + ShiftRight(Arg0, 16, Local0) + DBGW(Local0) + DBGW(Arg0) +} + +/* +* DBGO +* Send either a string or an integer +*/ +Method(DBGO, 1) +{ + /* DINI() */ + if (LEqual(ObjectType(Arg0), 1)) { + if (LGreater(Arg0, 0xffff)) { + DBGD(Arg0) + } else { + if (LGreater(Arg0, 0xff)) { + DBGW(Arg0) + } else { + DBGB(Arg0) + } + } + } else { + Name(BDBG, Buffer(80) {}) + store(Arg0, BDBG) + store(0, Local1) + while (One) { + store(GETC(BDBG, Local1), Local0) + if (LEqual(Local0, 0)) { + return (0) + } + OUTC(Local0) + Increment(Local1) + } + } + return (0) +} + +/* Get a char from a string */ +Method(GETC, 2) +{ + CreateByteField(Arg0, Arg1, DBGC) + return (DBGC) +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/event.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/event.asl new file mode 100644 index 0000000..c09392e --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/event.asl @@ -0,0 +1,316 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Supported sleep states: */ +Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ +Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ +Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ +Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ +Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ +Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + +Name(_SB.CSPS ,0) /* Current Sleep State (S0, ... , S5) */ +Name(CSMS, 0) /* Current System State */ + +/* Wake status package */ +Name(WKST,Package(){Zero, Zero}) + +/* +* _PTS - Prepare to Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2, etc +* +* Exit: +* -none- +* +* The _PTS control method is executed at the beginning of the sleep process +* for S1-S5. The sleeping value is passed to the _PTS control method. This +* control method may be executed a relatively long time before entering the +* sleep state and the OS may abort the operation without notification to +* the ACPI driver. This method cannot modify the configuration or power +* state of any device in the system. +*/ +Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) +} /* End Method(_PTS) */ + +/* +* The following method results in a "not a valid reserved NameSeg" +* warning so I have commented it out for the duration. It isn't +* used, so it could be removed. +* +* +* _GTS OEM Going To Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +* +* Method(_GTS, 1) { +* DBGO("\_GTS\n") +* DBGO("From S0 to S") +* DBGO(Arg0) +* DBGO("\n") +* } +*/ + +/* +* _BFS OEM Back From Sleep method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* -none- +*/ +Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ +} + +/* +* _WAK System Wake method +* +* Entry: +* Arg0=The value of the sleeping state S1=1, S2=2 +* +* Exit: +* Return package of 2 DWords +* Dword 1 - Status +* 0x00000000 wake succeeded +* 0x00000001 Wake was signaled but failed due to lack of power +* 0x00000002 Wake was signaled but failed due to thermal condition +* Dword 2 - Power Supply state +* if non-zero the effective S-state the power supply entered +*/ +Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) +} /* End Method(_WAK) */ + +Scope(_GPE) { /* Start Scope GPE */ + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event */ + /* SATA Hot Plug Support -> acpi/sata.asl */ +} /* End Scope GPE */ diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/globutil.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/globutil.asl new file mode 100644 index 0000000..5923bff --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/globutil.asl @@ -0,0 +1,218 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope(_SB) { + #include "globutil.asl" +} +*/ + +/* string compare functions */ +Method(MIN, 2) +{ + if (LLess(Arg0, Arg1)) { + Return(Arg0) + } else { + Return(Arg1) + } +} + +Method(SLEN, 1) +{ + Store(Arg0, Local0) + Return(Sizeof(Local0)) +} + +Method(S2BF, 1) +{ + Add(SLEN(Arg0), One, Local0) + Name(BUFF, Buffer(Local0) {}) + Store(Arg0, BUFF) + Return(BUFF) +} + +/* Strong string compare. Checks both length and content */ +Method(SCMP, 2) +{ + Store(S2BF(Arg0), Local0) + Store(S2BF(Arg1), Local1) + Store(Zero, Local4) + Store(SLEN(Arg0), Local5) + Store(SLEN(Arg1), Local6) + Store(MIN(Local5, Local6), Local7) + + While(LLess(Local4, Local7)) { + Store(Derefof(Index(Local0, Local4)), Local2) + Store(Derefof(Index(Local1, Local4)), Local3) + if (LGreater(Local2, Local3)) { + Return(One) + } else { + if (LLess(Local2, Local3)) { + Return(Ones) + } + } + Increment(Local4) + } + if (LLess(Local4, Local5)) { + Return(One) + } else { + if (LLess(Local4, Local6)) { + Return(Ones) + } else { + Return(Zero) + } + } +} + +/* Weak string compare. Checks to find Arg1 at beginning of Arg0. +* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on +* Pass. +*/ +Method(WCMP, 2) +{ + Store(S2BF(Arg0), Local0) + Store(S2BF(Arg1), Local1) + if (LLess(SLEN(Arg0), SLEN(Arg1))) { + Return(0) + } + Store(Zero, Local2) + Store(SLEN(Arg1), Local3) + + While(LLess(Local2, Local3)) { + if (LNotEqual(Derefof(Index(Local0, Local2)), + Derefof(Index(Local1, Local2)))) { + Return(0) + } + Increment(Local2) + } + Return(One) +} + +/* ARG0 = IRQ Number(0-15) +* Returns Bit Map +*/ +Method(I2BM, 1) +{ + Store(0, Local0) + if (LNotEqual(ARG0, 0)) { + Store(1, Local1) + ShiftLeft(Local1, ARG0, Local0) + } + Return(Local0) +} +Method (SEQL, 2, Serialized) +{ + Store (SizeOf (Arg0), Local0) + Store (SizeOf (Arg1), Local1) + If (LNot (LEqual (Local0, Local1))) { Return (Zero) } + + Name (BUF0, Buffer (Local0) {}) + Store (Arg0, BUF0) + Name (BUF1, Buffer (Local0) {}) + Store (Arg1, BUF1) + Store (Zero, Local2) + While (LLess (Local2, Local0)) + { + Store (DerefOf (Index (BUF0, Local2)), Local3) + Store (DerefOf (Index (BUF1, Local2)), Local4) + If (LNot (LEqual (Local3, Local4))) { Return (Zero) } + + Increment (Local2) + } + + Return (One) +} + +/* GetMemoryResources(Node, Link) */ +Method (GMEM, 2, NotSerialized) +{ + Name (BUF0, ResourceTemplate () + { + DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, + 0x00000000, // Address Space Granularity + 0x00000000, // Address Range Minimum + 0x00000000, // Address Range Maximum + 0x00000000, // Address Translation Offset + 0x00000001,,, + , AddressRangeMemory, TypeStatic) + }) + CreateDWordField (BUF0, 0x0A, MMIN) + CreateDWordField (BUF0, 0x0E, MMAX) + CreateDWordField (BUF0, 0x16, MLEN) + Store (0x00, Local0) + Store (0x00, Local4) + Store (0x00, Local3) + While (LLess (Local0, 0x10)) + { + /* Get value of the first register */ + Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local1) + Increment (Local0) + Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local2) + If (LEqual (And (Local1, 0x03), 0x03)) /* Pair enabled? */ + { + If (LEqual (Arg0, And (Local2, 0x07))) /* Node matches? */ + { + /* If Link Matches (or we got passed 0xFF) */ + If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) + { + /* Extract the Base and Limit values */ + Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) + Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) + Or (MMAX, 0xFFFF, MMAX) + Subtract (MMAX, MMIN, MLEN) + Increment (MLEN) + + If (Local4) /* I've already done this once */ + { + Concatenate (RTAG (BUF0), Local3, Local5) + Store (Local5, Local3) + } + Else + { + Store (RTAG (BUF0), Local3) + } + + Increment (Local4) + } + } + } + + Increment (Local0) + } + + If (LNot (Local4)) /* No resources for this node and link. */ + { + Store (RTAG (BUF0), Local3) + } + + Return (Local3) +} + +Method (RTAG, 1, NotSerialized) +{ + Store (Arg0, Local0) + Store (SizeOf (Local0), Local1) + Subtract (Local1, 0x02, Local1) + Multiply (Local1, 0x08, Local1) + CreateField (Local0, 0x00, Local1, RETB) + Store (RETB, Local2) + Return (Local2) +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/ide.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/ide.asl new file mode 100644 index 0000000..7b8c3bb --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/ide.asl @@ -0,0 +1,249 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(IDEC, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(IDEC, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* 0x40: 0:7 Primary PIO Slave Timing */ + PPTM, 8, /* 0x40: 8:15 Primary PIO Master Timing */ + OFFSET(0x04), + PMTS, 8, /* 0x44: 0:7 Primary MWDMA Slave Timing */ + PMTM, 8, /* 0x44: 7:15 Primary MWDMA Master Timing */ + OFFSET(0x08), + PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), + PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), + PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), + PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRIM) +{ + Name (_ADR, 0) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/platform.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/platform.asl new file mode 100644 index 0000000..8af607d --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/platform.asl @@ -0,0 +1,66 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +Name(PCIF, 0) + +Method(_PIC, 1, NotSerialized) +{ + Store(Arg0, PCIF) + If (Arg0) + { + _SB.PCI0.LPC0.CIRQ() + } +} + +External (_PR.CPU0, DeviceObj) +External (_PR.CPU1, DeviceObj) + +Scope(_SB) +{ + + Method(_INI, 0) + { + Store (2000, OSYS) + + If (CondRefOf(_OSI, Local0)) { + + If (_OSI("Linux")) { + Store (1, LINX) + } + + If (_OSI("Windows 2001")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP1")) { + Store (2001, OSYS) + } + + If (_OSI("Windows 2001 SP2")) { + Store (2002, OSYS) + } + + If (_OSI("Windows 2006")) { + Store (2006, OSYS) + } + } + } +} \ No newline at end of file diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/routing.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/routing.asl new file mode 100644 index 0000000..c7be29e --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/routing.asl @@ -0,0 +1,178 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Routing is in System Bus scope */ +Scope(_SB) +{ + Name(PR0, Package(){ + /* NB devices */ + /* SB devices */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 1, _SB.PCI0.LPC0.INTG, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0013FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0013FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0013FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0014FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0014FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0014FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* SB devices in APIC mode */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, 0, 16 }, + Package(){0x0013FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 2, 0, 18 }, + Package(){0x0013FFFF, 3, 0, 19 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + }) + + Name(PR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0005FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0005FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0005FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTD, 0 }, + Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTD, 0 }, + Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTC, 0 }, + Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTD, 0 }, + Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* PCIe slot - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTD, 0 }, + Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTA, 0 }, + Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTB, 0 }, + Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTC, 0 }, + }) + + Name(APS7, Package(){ + /* PCIe slot - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 1 behind Dev14, Fun4. */ + Package(){0x005FFFF, 0, _SB.PCI0.LPC0.INTF, 0 }, // Phoenix does it + Package(){0x005FFFF, 1, _SB.PCI0.LPC0.INTG, 0 }, // Phoenix does it + Package(){0x004FFFF, 0, _SB.PCI0.LPC0.INTE, 0 }, + Package(){0x004FFFF, 1, _SB.PCI0.LPC0.INTF, 0 }, + Package(){0x004FFFF, 2, _SB.PCI0.LPC0.INTG, 0 }, + Package(){0x004FFFF, 3, _SB.PCI0.LPC0.INTH, 0 }, + }) + + Name(AP2P, Package(){ + /* PCI slots: slot 0 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 21 }, // Phoenix does it + Package(){0x0005FFFF, 1, 0, 22 }, // Phoenix does it + Package(){0x0004FFFF, 0, 0, 20 }, + Package(){0x0004FFFF, 1, 0, 21 }, + Package(){0x0004FFFF, 2, 0, 22 }, + Package(){0x0004FFFF, 3, 0, 23 }, + }) + +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/sata.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/sata.asl new file mode 100644 index 0000000..3208830 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.SATA.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.SATA.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.SATA.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.SATA.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/statdef.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/statdef.asl new file mode 100644 index 0000000..bdee1b2 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/statdef.asl @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* Status and notification definitions */ + +#define STA_MISSING 0x00 +#define STA_PRESENT 0x01 +#define STA_ENABLED 0x03 +#define STA_DISABLED 0x09 +#define STA_INVISIBLE 0x0B +#define STA_UNAVAILABLE 0x0D +#define STA_VISIBLE 0x0F + +/* SMBus status codes */ +#define SMB_OK 0x00 +#define SMB_UnknownFail 0x07 +#define SMB_DevAddrNAK 0x10 +#define SMB_DeviceError 0x11 +#define SMB_DevCmdDenied 0x12 +#define SMB_UnknownErr 0x13 +#define SMB_DevAccDenied 0x17 +#define SMB_Timeout 0x18 +#define SMB_HstUnsuppProtocol 0x19 +#define SMB_Busy 0x1A +#define SMB_PktChkError 0x1F + +/* Device Object Notification Values */ +#define NOTIFY_BUS_CHECK 0x00 +#define NOTIFY_DEVICE_CHECK 0x01 +#define NOTIFY_DEVICE_WAKE 0x02 +#define NOTIFY_EJECT_REQUEST 0x03 +#define NOTIFY_DEVICE_CHECK_JR 0x04 +#define NOTIFY_FREQUENCY_ERROR 0x05 +#define NOTIFY_BUS_MODE 0x06 +#define NOTIFY_POWER_FAULT 0x07 +#define NOTIFY_CAPABILITIES 0x08 +#define NOTIFY_PLD_CHECK 0x09 +#define NOTIFY_SLIT_UPDATE 0x0B + +/* Battery Device Notification Values */ +#define NOTIFY_BAT_STATUSCHG 0x80 +#define NOTIFY_BAT_INFOCHG 0x81 +#define NOTIFY_BAT_MAINTDATA 0x82 + +/* Power Source Object Notification Values */ +#define NOTIFY_PWR_STATUSCHG 0x80 + +/* Thermal Zone Object Notification Values */ +#define NOTIFY_TZ_STATUSCHG 0x80 +#define NOTIFY_TZ_TRIPPTCHG 0x81 +#define NOTIFY_TZ_DEVLISTCHG 0x82 +#define NOTIFY_TZ_RELTBLCHG 0x83 + +/* Power Button Notification Values */ +#define NOTIFY_POWER_BUTTON 0x80 + +/* Sleep Button Notification Values */ +#define NOTIFY_SLEEP_BUTTON 0x80 + +/* Lid Notification Values */ +#define NOTIFY_LID_STATUSCHG 0x80 + +/* Processor Device Notification Values */ +#define NOTIFY_CPU_PPCCHG 0x80 +#define NOTIFY_CPU_CSTATECHG 0x81 +#define NOTIFY_CPU_THROTLCHG 0x82 + +/* User Presence Device Notification Values */ +#define NOTIFY_USR_PRESNCECHG 0x80 + +/* Battery Device Notification Values */ +#define NOTIFY_ALS_ILLUMCHG 0x80 +#define NOTIFY_ALS_COLORTMPCHG 0x81 +#define NOTIFY_ALS_RESPCHG 0x82 diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/thermal.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/thermal.asl new file mode 100644 index 0000000..02b1df1 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/thermal.asl @@ -0,0 +1,99 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +/* THERMAL */ +Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + // Processors used for active cooling + Method (_PSL, 0, Serialized) + { + If (MPEN) { + Return (Package() {_PR.CPU0, _PR.CPU1}) + } + Return (Package() {_PR.CPU0}) + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/usb.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/usb.asl new file mode 100644 index 0000000..ba2fe76 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi/usb.asl @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB_.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB_.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB_.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB_.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB_.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB_.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB_.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB_.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB_.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB_.PT9D) + } + } + } +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi_tables.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi_tables.c new file mode 100644 index 0000000..a982883 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/acpi_tables.c @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include <../../../northbridge/amd/amdk8/acpi.h> +#include <arch/cpu.h> +#include <cpu/amd/powernow.h> +#include <southbridge/amd/rs690/rs690.h> +#include "mainboard.h" +#include <cbmem.h> + +#define GLOBAL_VARS_SIZE 0x100 + +typedef struct { + /* Miscellaneous */ + u16 osys; + u16 linx; + u32 pcba; + u8 mpen; + u8 reserv[247]; +} __attribute__((packed)) global_vars_t; + +static void acpi_write_gvars(global_vars_t *gvars) +{ + device_t dev; + struct resource *res; + + memset((void *)gvars, 0, GLOBAL_VARS_SIZE); + + gvars->pcba = EXT_CONF_BASE_ADDRESS; + dev = dev_find_slot(0, PCI_DEVFN(0,0)); + res = probe_resource(dev, 0x1C); + if( res ) + gvars->pcba = res->base; + + gvars->mpen = 1; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB600 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); +#if !CONFIG_LINT01_CONVERSION + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); +#else + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + current = acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + /* 1: LINT1 connect to NMI */ + set_nbcfg_enable_bits(dev_find_slot(0, PCI_DEVFN(0x18, 0)), 0x68, 1 << 16, 1 << 16); // Local Interrupt Conversion Enable +#endif + return current; +} + +void mainboard_inject_dsdt(void) +{ + global_vars_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, GLOBAL_VARS_SIZE); + + if (gnvs) { + int scopelen; + memset(gnvs, 0, sizeof(*gnvs)); + acpi_write_gvars(gnvs); + + /* Add it to SSDT. */ + scopelen = acpigen_write_scope("\"); + scopelen += acpigen_write_name_dword("NVSA", (u32) gnvs); + acpigen_patch_len(scopelen - 1); + } +} + diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/board_info.txt b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/board_info.txt new file mode 100644 index 0000000..7680e6f --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/board_info.txt @@ -0,0 +1 @@ +Category: half diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.default b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.default new file mode 100644 index 0000000..5e47a19 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.default @@ -0,0 +1,24 @@ +last_boot=Fallback +boot_option=Fallback +baud_rate=115200 +debug_level=Spew +power_on_after_fail=Enable +nmi=Enable +sata_mode=AHCI +boot_devices='' +multi_core=Enable +cpu_fan_control=Disable +chassis_fan_control=Disable +cpu_fan_polarity=Active_high +chassis_fan_polarity=Active_high +cpu_t_min=45 +cpu_t_max=65 +cpu_dutycycle_min=30% +cpu_dutycycle_max=90% +chassis_t_min=40 +chassis_t_max=70 +chassis_dutycycle_min=25% +chassis_dutycycle_max=90% +lcd_panel_id=no_panel +boot_delay=off +boot_default=0 diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.layout b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.layout new file mode 100644 index 0000000..c5a99af --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/cmos.layout @@ -0,0 +1,206 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## Copyright (C) 2010 Siemens AG, Inc. +## (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ======================================================= +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ======================================================= +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ======================================================== +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +# ======================================================== +#384 1 r 0 unused +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +#386 2 r 1 unused +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +#395 1 r 1 unused +#396 1 r 1 unused +#397 2 r 8 unused +399 1 e 2 multi_core +#400 8 r 18 reserved +408 4 e 6 debug_level +412 1 e 1 power_on_after_fail +#413 1 r 1 unused +414 1 e 17 sata_mode +415 1 e 1 nmi +416 1 e 1 cpu_fan_control +417 1 e 1 chassis_fan_control +418 1 e 13 cpu_fan_polarity +419 1 e 13 chassis_fan_polarity +420 4 e 14 cpu_t_min +424 4 e 14 cpu_t_max +428 4 e 15 cpu_dutycycle_min +432 4 e 15 cpu_dutycycle_max +436 4 e 14 chassis_t_min +440 4 e 14 chassis_t_max +444 4 e 15 chassis_dutycycle_min +448 4 e 15 chassis_dutycycle_max +#452 4 r 9 unused +456 4 e 10 boot_delay +460 4 e 11 lcd_panel_id +#=========================================================== +464 512 s 0 boot_devices +976 8 h 0 boot_default +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 4 Warning +6 5 Notice +6 6 Info +6 7 Debug +6 8 Spew +#7 0 Network +#7 1 HDD +#7 2 Floppy +#7 8 Fallback_Network +#7 9 Fallback_HDD +#7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +# boot delay +10 0 off +10 1 1s +10 2 2s +10 3 3s +10 4 4s +10 5 5s +10 6 6s +10 7 7s +10 8 8s +10 9 9s +10 10 10s +# LCD Panel ID +11 0 no_panel +11 1 1024x768_65MHz_Dual +11 2 1920x1200_162MHz +11 3 1600x1200_162MHz +11 4 1024x768_65MHz +11 5 1400x1050_108MHz +11 6 1680x1050_119MHz +11 7 2048x1536_164MHz +11 8 1280x1024_108MHz +11 9 1366x768_86MHz_chimei_V32B1L01 +# TV Standard +#12 0 NTSC +#12 1 PAL +#12 2 PALM +#12 3 PAL60 +#12 4 NTSCJ +#12 5 PALCN +#12 6 PALN +#12 9 SCART-RGB +#12 15 no_tv +# CPU/Chassis FAN Control: polarity +13 0 Active_high +13 1 Active_low +# Temperature �C +14 0 30 +14 1 35 +14 2 40 +14 3 45 +14 4 50 +14 5 55 +14 6 60 +14 7 65 +14 8 70 +14 9 75 +14 10 80 +14 11 85 +14 12 90 +14 13 95 +14 14 100 +# Dutycycle % +15 0 25% +15 1 30% +15 2 35% +15 3 40% +15 4 45% +15 5 50% +15 6 55% +15 7 60% +15 8 65% +15 9 70% +15 10 75% +15 11 80% +15 12 85% +15 13 90% +15 14 95% +15 15 100% +# sata_mode +17 0 AHCI +17 1 IDE +# reserved +18 32 2000 +# ============================== +checksums + +checksum 392 983 984 diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/devicetree.cb b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/devicetree.cb new file mode 100644 index 0000000..1d83f10 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/devicetree.cb @@ -0,0 +1,135 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_S1G1 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x110a 0x4076 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on # Northbridge configuration space (0x7910) + end + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 5.0 on # Internal Graphics 0x791F + end + device pci 5.2 on # + end + end + device pci 2.0 on # PCIE P2P bridge 0x7913 (external GFX-port0) + end + device pci 3.0 off # PCIE P2P bridge 0x791b (external GFX-port1) + end + device pci 4.0 on # PCIE P2P bridge port 0 (0x7914) + end + device pci 5.0 on # PCIE P2P bridge port 1 (0x7915) + end + device pci 6.0 on # PCIE P2P bridge port 2 (0x7916) + end + device pci 7.0 on # PCIE P2P bridge port 3 (0x7917) + end + device pci 8.0 off # NB/SB Link P2P bridge + end + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "1" # needed for DVI output, but this results in a conflict if PLX installed ! + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" # 4 (0x8) if PLX installed + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e +# register "ide0_enable" = "1" +# register "sata0_enable" = "1" + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/dsdt.asl b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/dsdt.asl new file mode 100644 index 0000000..e106561 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/dsdt.asl @@ -0,0 +1,1313 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <arch/ioapic.h> +#include <cpu/x86/lapic_def.h> + +DefinitionBlock ("DSDT.aml", "DSDT", 2, "SIEMENS", "SITEMP ", 0x20101005) +{ + /* Data to be patched by the BIOS during POST */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + Name(DSEN, 1) // Display Output Switching Enable + // Power notification + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + SINT, 0x00000008, /* Index 4 */ + Offset(0x09), + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + External(\NVSA) + + OperationRegion (GVAR, SystemMemory, \NVSA, 0x100) + Field (GVAR, ByteAcc, NoLock, Preserve) + { + Offset (0x00), + OSYS, 16, + LINX, 16, + PCBA, 32, + MPEN, 8 + } + + Name (IOLM,0xe0000000) + +#include "acpi/platform.asl" + + Scope(_SB) { + + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x2000000) /* PCIe reserved space for 31 busses */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + Offset(0x00090024), /* Byte offset to SATA BAR5 register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(BAR5, SystemMemory, STB5, 0x1000) + Field(BAR5, AnyAcc, NoLock, Preserve) + { + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } +#include "acpi/event.asl" +#include "acpi/routing.asl" +#include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) + { + /* Start _SB scope */ + +#include "acpi/globutil.asl" + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) + { + External (MMIO) + External (TOM1) + External (TOM2) + + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Device (MEMR) + { + Name (_HID, EisaId ("PNP0C02")) + Name (MEM1, ResourceTemplate () + { + Memory32Fixed (ReadWrite, + 0x00000000, // Address Base + 0x00000000, // Address Length + _Y1A) + Memory32Fixed (ReadWrite, + 0x00000000, // Address Base + 0x00000000, // Address Length + _Y1B) + }) + Method (_CRS, 0, NotSerialized) + { + CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1A._BAS, MB01) + CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1A._LEN, ML01) + CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1B._BAS, MB02) + CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1B._LEN, ML02) + If (PCIF) + { + Store (IO_APIC_ADDR, MB01) + Store (LOCAL_APIC_ADDR, MB02) + Store (0x1000, ML01) + Store (0x1000, ML02) + } + + Return (MEM1) + } + } + + Method(_PRT,0) { + If(PCIF){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + OperationRegion (BAR1, PCI_Config, 0x14, 0x04) + Field (BAR1, ByteAcc, NoLock, Preserve) + { + Z009, 32 + } + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { Return (APR1) } + + Device (VGA) + { + Name (_ADR, 0x00050000) + Method (_DOS, 1) + { + /* Windows 2000 and Windows XP call _DOS to enable/disable + * Display Output Switching during init and while a switch + * is already active + */ + Store (And(Arg0, 7), DSEN) + } + Method (_STA, 0, NotSerialized) + { + Return (0x0F) + } + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PCIF){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PCIF){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PCIF){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PCIF){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PCIF){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + /* PCI slot 1 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {4, 5}) // Phoenix doeas it so + Method(_PRT, 0) { + If(PCIF){ Return(AP2P) } /* APIC Mode */ + Return (PCIB) /* PIC Mode */ + } + } + + /* Describe the Southbridge devices */ + Device(SATA) { + Name(_ADR, 0x00120000) +#include "acpi/sata.asl" + } /* end SATA */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(LINX,1)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LPC0) + { + Name (_ADR, 0x00140003) + Mutex (PSMX, 0x00) + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + SINT, 0x00000008, /* Index 4 */ + Offset(0x09), + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + Method(CIRQ, 0x00, NotSerialized) + { + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, SINT) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){10,11} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINA, IRQ0) + Return(Local0) + } /* Method(_SB.INTA._CRS) */ + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement (Local0) + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINB, IRQ0) + Return(Local0) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINC, IRQ0) + Return(Local0) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PIND, IRQ0) + Return(Local0) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINE, IRQ0) + Return(Local0) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINF, IRQ0) + Return(Local0) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PING, IRQ0) + Return(Local0) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + Return(IRQB) // Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + Store (IRQB, Local0) // {10,11} + CreateWordField(Local0, 0x1, IRQ0) + ShiftLeft(1, PINH, IRQ0) + Return(Local0) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + CreateWordField(ARG0, 1, IRQ0) + /* Use lowest available IRQ */ + FindSetRightBit(IRQ0, Local0) + Decrement(Local0) + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible)*/ + Name(_CRS, ResourceTemplate() { + IRQ (Edge, ActiveHigh, Exclusive, ) {8} + IO(Decode16,0x0070, 0x0070, 1, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQ (Edge, ActiveHigh, Exclusive, ) {0} + IO(Decode16, 0x0040, 0x0040, 1, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 1, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQ (Edge, ActiveHigh, Exclusive, ) {2} + IO(Decode16,0x0020, 0x0020, 1, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,NotBusMaster,Transfer8_16){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 1, 0x10) + IRQ (Edge, ActiveHigh, Exclusive, ) {13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPET) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } + + Device (KBC0) + { + Name (_HID, EisaId ("PNP0303")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0060, // Range Minimum + 0x0060, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IO (Decode16, + 0x0064, // Range Minimum + 0x0064, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IRQ (Edge, ActiveHigh, Exclusive, ) {1} + }) + } + + Device (MSE0) + { + Name (_HID, EisaId ("PNP0F13")) + Name (_CRS, ResourceTemplate () + { + IRQ (Edge, ActiveHigh, Exclusive, ) {12} + }) + } + } /* end LPC0 */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + Name (_PRW, Package (0x02) + { + 0x0C, + 0x04 + }) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + Name (_PRW, Package (0x02) + { + 0x0C, + 0x04 + }) + } /* end Ac97modem */ + + /* ITE IT8712F Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the IT8712F MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* IT8712F magic number */ + } + /* Exit the IT8712F MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + + /* + * Keyboard PME is routed to SB600 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("IT8712F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + +/* ############################################################################################### */ + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + DWORDMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0, 0, 0, 0x00, 1, ,, EMM2) + WORDIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x00, 0x0D00, 0xffff, 0x00, 0xf300) + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + + CreateDWordField(CRES, ^EMM2._MIN, EM2B) + CreateDWordField(CRES, ^EMM2._MAX, EM2E) + CreateDWordField(CRES, ^EMM2._LEN, EM2L) + + Store(TOM1, EM2B) + Subtract(IOLM, 1, EM2E) + Subtract(IOLM, TOM1, EM2L) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + Return(CRES) /* note to change the Name buffer */ + } +/* ########################################################################################## */ + } /* End Device(PCI0) */ + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x10) // 0x0C replace by 0x10 + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8, /* SMBUS slave data */ + SMK1, 8, + SLMC, 8, + RADD, 8, + SADD, 8 + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } +#include "acpi/thermal.asl" +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/fadt.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/fadt.c new file mode 100644 index 0000000..f9acfe4 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/fadt.c @@ -0,0 +1,202 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include <../southbridge/amd/sb600/sb600.h> + +/*extern*/ u16 pm_base = 0x800; +/* pm_base should be set in sb acpi */ +/* pm_base should be got from bar2 of rs690. Here I compact ACPI + * registers into 32 bytes limit. + * */ + +#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + pm_base &= 0xFFFF; + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->oem_revision = 0x20101005; + header->asl_compiler_revision = 3; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); + pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); + pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); + pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in _PR.CPU0, 6 bytes */ + pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); + pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); + + pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ + pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ + + pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); + pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 20-2B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ + pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/get_bus_conf.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/get_bus_conf.c new file mode 100644 index 0000000..084e2b1 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs690[8]; +u8 bus_sb600[2]; +u32 apicid_sb600; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs690; +u32 sbdn_sb600; + + + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs690 = sysconf.sbdn; + sbdn_sb600 = 0; + + for (i = 0; i < 2; i++) { + bus_sb600[i] = 0; + } + for (i = 0; i < 8; i++) { + bus_rs690[i] = 0; + } + + bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb600[0] = bus_rs690[0]; + + /* sb600 */ + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); + if (dev) { + bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs690 */ + for (i = 1; i < 8; i++) { + dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); + if (dev) { + bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb600 = apicid_base + 0; +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.c new file mode 100644 index 0000000..31dd6e2 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.c @@ -0,0 +1,112 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/interrupt.h> +#include <x86emu/regs.h> +#include "int15_func.h" + +int sbios_INT15_handler(void); +/*extern*/ unsigned long vgainfo_addr; + +static INT15_function_extensions __int15_func; + +/* System BIOS int15 function */ +int sbios_INT15_handler(void) +{ + int res = -1; + + printk(BIOS_DEBUG, "System BIOS INT 15h\n"); + + switch (X86_EAX & 0xffff) { +#define BOOT_DISPLAY_DEFAULT 0 +#define BOOT_DISPLAY_CRT (1 << 0) +#define BOOT_DISPLAY_TV (1 << 1) +#define BOOT_DISPLAY_EFP (1 << 2) +#define BOOT_DISPLAY_LCD (1 << 3) +#define BOOT_DISPLAY_CRT2 (1 << 4) +#define BOOT_DISPLAY_TV2 (1 << 5) +#define BOOT_DISPLAY_EFP2 (1 << 6) +#define BOOT_DISPLAY_LCD2 (1 << 7) + case 0x5f35: + X86_EAX = 0x5f; + X86_ECX = BOOT_DISPLAY_DEFAULT; + res = 0; + break; + case 0x5f40: + X86_EAX = 0x5f; + X86_ECX = 3; // This is mainboard specific + printk(BIOS_DEBUG, "DISPLAY=%x\n", X86_ECX); + res = 0; + break; + case 0x4e08: + switch (X86_EBX & 0xff) { + case 0x00: + X86_EAX &= ~(0xff); + X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func00_LCD_panel_id; + printk(BIOS_DEBUG, "DISPLAY = %x\n", X86_EBX & 0xff); + res = 0; + break; + case 0x02: + break; + case 0x05: + X86_EAX &= ~(0xff); + X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func05_TV_standard; + printk(BIOS_DEBUG, "TV = %x\n", X86_EBX & 0xff); + res = 0; + break; + case 0x80: + X86_EAX &= ~(0xff); + X86_EBX &= ~(0xff); + printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", X86_EDX, X86_EDI); + vgainfo_addr = (X86_EDX * 16) + X86_EDI; + res = 0; + break; + case 0x89: + X86_EAX &= ~(0xff); + X86_EBX &= ~(0xff); + printk(BIOS_DEBUG, "Get supported display device information\n"); + res = 0; + break; + default: + break; + } + break; + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", X86_EAX & 0xffff); + break; + } + + return res; +} + +/* Initialization VBIOS function extensions */ +void install_INT15_function_extensions(INT15_function_extensions *int15_func) +{ + printk(BIOS_DEBUG, "Initialize function extensions for Callback function number 04E08h ..\n"); + __int15_func.regs.func00_LCD_panel_id = int15_func->regs.func00_LCD_panel_id; + __int15_func.regs.func05_TV_standard = int15_func->regs.func05_TV_standard; + mainboard_interrupt_handlers(0x15, &sbios_INT15_handler); +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.h b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.h new file mode 100644 index 0000000..26f679e --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/int15_func.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +typedef struct { + u8 func00_LCD_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID + u8 func02_set_expansion; + u8 func05_TV_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard + u16 func80_sysinfo_table; +}INT15_regs; + +typedef struct { + INT15_regs regs; +}INT15_function_extensions; + +extern void install_INT15_function_extensions(INT15_function_extensions *); diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/irq_tables.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/irq_tables.c new file mode 100644 index 0000000..ad00da6 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/irq_tables.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +/* Platform IRQs */ +#define PIRQA 10 +#define PIRQB 11 +#define PIRQC 5 +#define PIRQD 15 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; +extern unsigned long sbdn_sb600; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb600[0]; + pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, 0); + pirq_info++; + slot_num++; + + /* ide */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 1, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.c new file mode 100644 index 0000000..77be0af --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.c @@ -0,0 +1,855 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <arch/interrupt.h> +#include <delay.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <pc80/mc146818rtc.h> +#include <cpu/x86/lapic.h> +#include <southbridge/amd/sb600/sb600.h> +#include <southbridge/amd/rs690/chip.h> +#include <southbridge/amd/rs690/rs690.h> +#include <superio/ite/it8712f/it8712f.h> +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL +#include <x86emu/x86emu.h> +#endif +#include "int15_func.h" +#include "mainboard.h" + +// ****LCD panel ID support: ***** +// Callback Sub-Function 00h - Get LCD Panel ID +#define PANEL_TABLE_ID_NO 0 // no LCD +#define PANEL_TABLE_ID1 1 // 1024x768_65MHz_Dual +#define PANEL_TABLE_ID2 2 // 920x1200_162MHz +#define PANEL_TABLE_ID3 3 // 600x1200_162MHz +#define PANEL_TABLE_ID4 4 // 1024x768_65MHz +#define PANEL_TABLE_ID5 5 // 1400x1050_108MHz +#define PANEL_TABLE_ID6 6 // 1680x1050_119MHz +#define PANEL_TABLE_ID7 7 // 2048x1536_164MHz +#define PANEL_TABLE_ID8 8 // 1280x1024_108MHz +#define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01 + +// Callback Sub-Function 05h � Select Boot-up TV Standard +#define TV_MODE_00 0x00 /* NTSC */ +#define TV_MODE_01 0x01 /* PAL */ +#define TV_MODE_02 0x02 /* PALM */ +#define TV_MODE_03 0x03 /* PAL60 */ +#define TV_MODE_04 0x04 /* NTSCJ */ +#define TV_MODE_05 0x05 /* PALCN */ +#define TV_MODE_06 0x06 /* PALN */ +#define TV_MODE_09 0x09 /* SCART-RGB */ +#define TV_MODE_NO 0xff /* No TV Support */ + +#define PLX_VIDDID 0x861610b5 + +/* 7475 Common Registers */ +#define REG_DEVREV2 0x12 /* ADT7490 only */ +#define REG_VTT 0x1E /* ADT7490 only */ +#define REG_EXTEND3 0x1F /* ADT7490 only */ +#define REG_VOLTAGE_BASE 0x20 +#define REG_TEMP_BASE 0x25 +#define REG_TACH_BASE 0x28 +#define REG_PWM_BASE 0x30 +#define REG_PWM_MAX_BASE 0x38 +#define REG_DEVID 0x3D +#define REG_VENDID 0x3E +#define REG_DEVID2 0x3F +#define REG_STATUS1 0x41 +#define REG_STATUS2 0x42 +#define REG_VID 0x43 /* ADT7476 only */ +#define REG_VOLTAGE_MIN_BASE 0x44 +#define REG_VOLTAGE_MAX_BASE 0x45 +#define REG_TEMP_MIN_BASE 0x4E +#define REG_TEMP_MAX_BASE 0x4F +#define REG_TACH_MIN_BASE 0x54 +#define REG_PWM_CONFIG_BASE 0x5C +#define REG_TEMP_TRANGE_BASE 0x5F +#define REG_PWM_MIN_BASE 0x64 +#define REG_TEMP_TMIN_BASE 0x67 +#define REG_TEMP_THERM_BASE 0x6A +#define REG_REMOTE1_HYSTERSIS 0x6D +#define REG_REMOTE2_HYSTERSIS 0x6E +#define REG_TEMP_OFFSET_BASE 0x70 +#define REG_CONFIG2 0x73 +#define REG_EXTEND1 0x76 +#define REG_EXTEND2 0x77 +#define REG_CONFIG1 0x40 // ADT7475 +#define REG_CONFIG3 0x78 +#define REG_CONFIG5 0x7C +#define REG_CONFIG6 0x10 // ADT7475 +#define REG_CONFIG7 0x11 // ADT7475 +#define REG_CONFIG4 0x7D +#define REG_STATUS4 0x81 /* ADT7490 only */ +#define REG_VTT_MIN 0x84 /* ADT7490 only */ +#define REG_VTT_MAX 0x86 /* ADT7490 only */ + +#define VID_VIDSEL 0x80 /* ADT7476 only */ + +#define CONFIG2_ATTN 0x20 +#define CONFIG3_SMBALERT 0x01 +#define CONFIG3_THERM 0x02 +#define CONFIG4_PINFUNC 0x03 +#define CONFIG4_MAXDUTY 0x08 +#define CONFIG4_ATTN_IN10 0x30 +#define CONFIG4_ATTN_IN43 0xC0 +#define CONFIG5_TWOSCOMP 0x01 +#define CONFIG5_TEMPOFFSET 0x02 +#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ +#define REMOTE1 0 +#define LOCAL 1 +#define REMOTE2 2 + +/* ADT7475 Settings */ +#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ +#define ADT7475_TEMP_COUNT 3 +#define ADT7475_TACH_COUNT 4 +#define ADT7475_PWM_COUNT 3 + +/* Macros to easily index the registers */ +#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) +#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) + +#define PWM_REG(idx) (REG_PWM_BASE + (idx)) +#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) +#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) +#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) + +#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) +#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) +#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) + +#define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) +#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) +#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) +#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) +#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) +#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) +#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) + +#define SMBUS_IO_BASE 0x1000 +#define ADT7475_ADDRESS 0x2E + +#define D_OPEN (1 << 6) +#define D_CLS (1 << 5) +#define D_LCK (1 << 4) +#define G_SMRAME (1 << 3) +#define A_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB + +extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); + +static u32 smbus_io_base = SMBUS_IO_BASE; +static u32 adt7475_address = ADT7475_ADDRESS; + +/* Macro to read the registers */ +#define adt7475_read_byte(reg) \ + do_smbus_read_byte(smbus_io_base, adt7475_address, reg) + +#define adt7475_write_byte(reg, val) \ + do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) + +#define TWOS_COMPL 1 + +struct __table__{ + const char *info; + u8 val; +}; + +struct __table__ dutycycles[] = { + {"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73}, + {"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4}, + {"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5}, + {"100%", 0xff} +}; +#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__) +#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix +#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range" +#if TWOS_COMPL == 0 +struct __table__ temperatures[] = { + {"30�C", 0x5e},{"35�C", 0x63},{"40�C", 0x68},{"45�C", 0x6d},{"50�C", 0x72}, + {"55�C", 0x77},{"60�C", 0x7c},{"65�C", 0x81},{"70�C", 0x86},{"75�C", 0x8b}, + {"80�C", 0x90} +}; +#else +struct __table__ temperatures[] = { + {"30�C", 30},{"35�C", 35},{"40�C", 40},{"45�C", 45},{"50�C", 50}, + {"55�C", 55},{"60�C", 60},{"65�C", 65},{"70�C", 70},{"75�C", 75}, + {"80�C", 80} +}; +#endif +int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0}; + +#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__) +#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix +#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range" + +struct fan_control { + unsigned int enable : 1; + u8 polarity; + u8 t_min; + u8 t_max; + u8 pwm_min; + u8 pwm_max; + u8 t_range; +}; +/* ############################################################################################# */ +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL +static int int15_handler(void) +{ +#define BOOT_DISPLAY_DEFAULT 0 +#define BOOT_DISPLAY_CRT (1 << 0) +#define BOOT_DISPLAY_TV (1 << 1) +#define BOOT_DISPLAY_EFP (1 << 2) +#define BOOT_DISPLAY_LCD (1 << 3) +#define BOOT_DISPLAY_CRT2 (1 << 4) +#define BOOT_DISPLAY_TV2 (1 << 5) +#define BOOT_DISPLAY_EFP2 (1 << 6) +#define BOOT_DISPLAY_LCD2 (1 << 7) + + printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, X86_AX, X86_BX, X86_CX, X86_DX); + + switch (X86_AX) { + case 0x4e08: /* Boot Display */ + switch (X86_BX) { + case 0x80: + X86_AX &= ~(0xff); // Success + X86_BX &= ~(0xff); + printk(BIOS_DEBUG, "Integrated System Information\n"); + break; + case 0x00: + X86_AX &= ~(0xff); + X86_BX = 0x00; + printk(BIOS_DEBUG, "Panel ID = 0\n"); + break; + case 0x05: + X86_AX &= ~(0xff); + X86_BX = 0xff; + printk(BIOS_DEBUG, "TV = off\n"); + break; + default: + return 0; + } + break; + case 0x5f35: /* Boot Display */ + X86_AX = 0x005f; // Success + X86_CL = BOOT_DISPLAY_DEFAULT; + break; + case 0x5f40: /* Boot Panel Type */ + // M.x86.R_AX = 0x015f; // Supported but failed + X86_AX = 0x005f; // Success + X86_CL = 3; // Display ID + break; + default: + /* Interrupt was not handled */ + return 0; + } + + /* Interrupt handled */ + return 1; +} +#endif +/* ############################################################################################# */ + + /** + * @brief + * + * @param + */ + +static u8 calc_trange(u8 t_min, u8 t_max) { + + u8 prev; + int i; + int diff = t_max - t_min; + + // walk through the trange table + for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { + if( trange[i] < diff ) { + prev = i; // save last val + continue; + } + if( diff == trange[i] ) return i; + if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index + return i; + } + return prev; +} + +/******************************************************** +* sina uses SB600 GPIO9 to detect IDE_DMA66. +* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to +* get the cable type, 40 pin or 80 pin? +********************************************************/ +static void cable_detect(void) +{ + + u8 byte; + struct device *sm_dev; + struct device *ide_dev; + + /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ + printk(BIOS_DEBUG, "%s.\n", __func__); + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + byte = pci_read_config8(sm_dev, 0xA9); + byte |= (1 << 5); /* Set Gpio9 as input */ + pci_write_config8(sm_dev, 0xA9, byte); + + /* IDE Controller (Device 20, Function 1) on SB600 */ + ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); + + byte = pci_read_config8(ide_dev, 9); + printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility"); + + byte = pci_read_config8(ide_dev, 0x56); + byte &= ~(7 << 0); + if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) ) + byte |= 2 << 0; /* mode 2 */ + else + byte |= 5 << 0; /* mode 5 */ + printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0)); + pci_write_config8(ide_dev, 0x56, byte); +} + +/** + * @brief Detect the ADT7475 device + * + * @param + */ + +static const char * adt7475_detect( void ) { + + int vendid, devid, devid2; + const char *name = NULL; + + vendid = adt7475_read_byte(REG_VENDID); + devid2 = adt7475_read_byte(REG_DEVID2); + if (vendid != 0x41 || /* Analog Devices */ + (devid2 & 0xf8) != 0x68) { + return name; + } + + devid = adt7475_read_byte(REG_DEVID); + if (devid == 0x73) + name = "adt7473"; + else if (devid == 0x75 && adt7475_address == 0x2e) + name = "adt7475"; + else if (devid == 0x76) + name = "adt7476"; + else if ((devid2 & 0xfc) == 0x6c) + name = "adt7490"; + + return name; +} + +// thermal control defaults +const struct fan_control cpu_fan_control_defaults = { + .enable = 0, // disable by default + .polarity = 0, // high by default + .t_min = 3, // default = 45�C + .t_max = 7, // 65�C + .pwm_min = 1, // default dutycycle = 30% + .pwm_max = 13, // 90% +}; +const struct fan_control case_fan_control_defaults = { + .enable = 0, // disable by default + .polarity = 0, // high by default + .t_min = 2, // default = 40�C + .t_max = 8, // 70�C + .pwm_min = 0, // default dutycycle = 25% + .pwm_max = 13, // 90% +}; + +static void pm_init( void ) +{ + u16 word; + u8 byte; + device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* set SB600 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to tristate */ + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* set GPM5 to not wake from s5 */ + byte = pm_ioread(0x77); + byte &= ~(1 << 5); + pm_iowrite(0x77, byte); +} + + /** + * @brief Setup thermal config on SINA Mainboard + * + * @param + */ + +static void set_thermal_config(void) +{ + u8 byte, byte2; + u8 cpu_pwm_conf, case_pwm_conf; + device_t sm_dev; + struct fan_control cpu_fan_control, case_fan_control; + const char *name = NULL; + + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE + + if( (name = adt7475_detect()) == NULL ) { + printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); + return; + } + printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); + + cpu_fan_control = cpu_fan_control_defaults; + case_fan_control = case_fan_control_defaults; + + if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) { + printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__); + } else { + // get all the options needed + if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS ) + cpu_fan_control.enable = byte ? 1 : 0; + + get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); + get_option(&cpu_fan_control.t_min, "cpu_t_min"); + get_option(&cpu_fan_control.t_max, "cpu_t_max"); + get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min"); + get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); + + if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS) + case_fan_control.enable = byte ? 1 : 0; + get_option(&case_fan_control.polarity, "chassis_fan_polarity"); + get_option(&case_fan_control.t_min, "chassis_t_min"); + get_option(&case_fan_control.t_max, "chassis_t_max"); + get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); + get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); + + } + + printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); + printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high"); + + printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); + cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); + + printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); + cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); + + printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); + cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); + + printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); + cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); + + cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); + printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); + cpu_fan_control.t_range <<= 4; + cpu_fan_control.t_range |= (4 << 0); // 35.3Hz + + printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); + printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high"); + + printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); + case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); + + printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); + case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); + + printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); + case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); + + printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); + case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); + + case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); + printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); + case_fan_control.t_range <<= 4; + case_fan_control.t_range |= (4 << 0); // 35.3Hz + + cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output + case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output + cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control + case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp + + /* set adt7475 */ + + adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only + + /* Config Register 6: */ + adt7475_write_byte(REG_CONFIG6, 0x00); + /* Config Register 7 */ + adt7475_write_byte(REG_CONFIG7, 0x00); + + /* Config Register 5: */ + /* set Offset 64 format, enable THERM on Remote 1& Local */ + adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); + /* No offset for remote 1 */ + adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); + /* No offset for local */ + adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); + /* No offset for remote 2 */ + adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); + + /* remote 1 low temp limit */ + adt7475_write_byte(TEMP_MIN_REG(0), 0x00); + /* remote 1 High temp limit (90C) */ + adt7475_write_byte(TEMP_MAX_REG(0), 0x9a); + + /* local Low Temp Limit */ + adt7475_write_byte(TEMP_MIN_REG(1), 0x00); + /* local High Limit (90C) */ + adt7475_write_byte(TEMP_MAX_REG(1), 0x9a); + + /* remote 1 therm temp limit (95C) */ + adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); + /* local therm temp limit (95C) */ + adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); + + /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ + adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); + /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ + adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf); + + if( cpu_fan_control.enable ) { + /* PWM 1 minimum duty cycle (37%) */ + adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min); + /* PWM 1 Maximum duty cycle (100%) */ + adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max); + /* Remote 1 temperature Tmin (32C) */ + adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min); + /* remote 1 Trange (53C ramp range) */ + adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range); + } else { + adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); + } + + if( case_fan_control.enable ) { + /* PWM 2 minimum duty cycle (37%) */ + adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); + /* PWM 2 Maximum Duty Cycle (100%) */ + adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max); + /* local temperature Tmin (32C) */ + adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min); + /* local Trange (53C ramp range) */ + adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange + adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq + } else { + adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max); + } + + /* Config Register 3 - enable smbalert & therm */ + adt7475_write_byte(0x78, 0x03); + /* Config Register 4 - enable therm output */ + adt7475_write_byte(0x7d, 0x09); + /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ + adt7475_write_byte(0x75, 0x2e); + + /* Config Register 1 Set Start bit */ + adt7475_write_byte(0x40, 0x05); + + /* Read status register to clear any old errors */ + byte2 = adt7475_read_byte(0x42); + byte = adt7475_read_byte(0x41); + + printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n", + byte2, byte); + +} + + /** + * @brief + * + * @param + */ + +static void patch_mmio_nonposted( void ) +{ + unsigned reg, index; + resource_t rbase, rend; + u32 base, limit; + struct resource *resource; + device_t dev; + device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); + + printk(BIOS_DEBUG,"%s ...\n", __func__); + + dev = dev_find_slot(1, PCI_DEVFN(5,0)); + // the uma frame buffer + index = 0x10; + resource = probe_resource(dev, index); + if( resource ) { + // fixup resource nonposted in k8 mmio + /* Get the base address */ + rbase = (resource->base >> 8) & ~(0xff); + /* Get the limit (rounded up) */ + rend = (resource_end(resource) >> 8) & ~(0xff); + + printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend); + + for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { + base = pci_read_config32(k8_f1,reg); + limit = pci_read_config32(k8_f1,reg+4); + printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); + if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { + limit |= (1 << 7); + printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); + pci_write_config32(k8_f1, reg+4, limit); + break; + } + } + printk(BIOS_DEBUG, "\n"); + } +} + + /** + * @brief + * + * @param + */ + +struct { + unsigned int bus; + unsigned int devfn; +} slot[] = { + {0, PCI_DEVFN(0,0)}, + {0, PCI_DEVFN(18,0)}, + {0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)}, + {0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)}, + {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, + {255,0}, +}; + + +unsigned int plx_present = 0; + +static void update_subsystemid( device_t dev ) +{ + int i; + + dev->subsystem_vendor = 0x110a; + if( plx_present ){ + dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 + } else { + dev->subsystem_device = 0x4077; // U1P0 = 0x4077 + } + printk(BIOS_INFO, "%s [%x/%x]\n", dev_name(dev), dev->subsystem_vendor, dev->subsystem_device ); + for( i=0; slot[i].bus < 255; i++) { + device_t d; + d = dev_find_slot(slot[i].bus,slot[i].devfn); + if( d ) { + printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device); + d->subsystem_device = dev->subsystem_device; + } + } +} + + /** + * @brief + * + * @param + */ + +static void detect_hw_variant( device_t dev ) +{ + + device_t nb_dev =0, dev2 = 0; + struct southbridge_amd_rs690_config *cfg; + u32 lc_state, id = 0; + + printk(BIOS_INFO, "Scan for PLX device ...\n"); + nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + if (!nb_dev) { + die("CAN NOT FIND RS690 DEVICE, HALT!\n"); + /* NOT REACHED */ + } + + dev2 = dev_find_slot(0, PCI_DEVFN(2, 0)); + if (!dev2) { + die("CAN NOT FIND GFX DEVICE 2, HALT!\n"); + /* NOT REACHED */ + } + PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2 + + mdelay(40); + lc_state = nbpcie_p_read_index(dev2, 0xa5); /* lc_state */ + printk(BIOS_DEBUG, "lc current state=%x\n", lc_state); + /* LC_CURRENT_STATE = bit0-5 */ + switch( lc_state & 0x3f ){ + case 0x00: + case 0x01: + case 0x02: + case 0x03: + case 0x04: + printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n"); + break; + case 0x07: + case 0x10: + { + struct device dummy; + u32 pci_primary_bus, buses; + u16 secondary, subordinate; + + printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); + // save the existing primary/secondary/subordinate bus number configuration. + secondary = dev2->bus->secondary; + subordinate = dev2->bus->subordinate; + buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS); + + // Configure the bus numbers for this bridge + // bus number 1 is for internal gfx device, so we start with busnumber 2 + + buses &= 0xff000000; + buses |= ((2 << 8) | (0xff << 16)); + // setup the buses in device 2 + pci_write_config32(dev2,PCI_PRIMARY_BUS, buses); + + // fake a device descriptor for a device behind device 2 + dummy.bus = dev2->bus; + dummy.bus->secondary = (buses >> 8) & 0xff; + dummy.bus->subordinate = (buses >> 16) & 0xff; + dummy.path.type = DEVICE_PATH_PCI; + dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0 + + id = pci_read_config32(&dummy, PCI_VENDOR_ID); + /* Have we found something? + * Some broken boards return 0 if a slot is empty, but + * the expected answer is 0xffffffff + */ + if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { + printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); + } else { + printk(BIOS_DEBUG, "found device [%x]\n", id); + } + // restore changes made for device 2 + dev2->bus->secondary = secondary; + dev2->bus->secondary = subordinate; + pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus); + } + break; + default: + break; + } + + plx_present = 0; + if( id == PLX_VIDDID ){ + printk(BIOS_INFO, "found PLX device\n"); + plx_present = 1; + cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info; + if( cfg->gfx_tmds ) { + printk(BIOS_INFO, "Disable 'gfx_tmds' support\n"); + cfg->gfx_tmds = 0; + cfg->gfx_link_width = 4; + } + return; + } +} + +static void smm_lock( void ) +{ + /* LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69, + D_LCK | G_SMRAME | A_BASE_SEG); +} + + /** + * @brief Init + * + * @param the root device + */ + +static void mainboard_init(device_t dev) +{ +#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE + INT15_function_extensions int15_func; +#endif + + printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", + dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); + +#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE + if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS) + int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; + int15_func.regs.func05_TV_standard = TV_MODE_NO; + install_INT15_function_extensions(&int15_func); +#endif + set_thermal_config(); + pm_init(); + cable_detect(); + patch_mmio_nonposted(); + smm_lock(); +} + +/************************************************* +* enable the dedicated function in sina board. +* This function called early than rs690_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + + printk(BIOS_INFO, "%s %s[%x/%x] %s\n", + dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL + /* Install custom int15 handler for VGA OPROM */ + mainboard_interrupt_handlers(0x15, &int15_handler); +#endif + + detect_hw_variant(dev); + update_subsystemid(dev); + + dev->ops->init = mainboard_init; // rest of mainboard init later + dev->ops->acpi_inject_dsdt_generator = mainboard_inject_dsdt; +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.h b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.h new file mode 100644 index 0000000..7f80ca8 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mainboard.h @@ -0,0 +1 @@ +void mainboard_inject_dsdt(void); diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mptable.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mptable.c new file mode 100644 index 0000000..de5151d --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/mptable.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdk8_sysconf.h> + +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; + +extern u32 apicid_sb600; + +extern u32 sbdn_rs690; +extern u32 sbdn_sb600; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + mptable_init(mc, LOCAL_APIC_ADDR); + smp_write_processors(mc); + + get_bus_conf(); + printk(BIOS_DEBUG, "%s: apic_id=0x%x\n", __func__, apicid_sb600); + + mptable_write_buses(mc, NULL, &isa_bus); + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 0)); + if (dev) { + struct resource *res; + res = find_resource(dev, 0x74); + smp_write_ioapic(mc, apicid_sb600, 0x20, res->base); + } + } + mptable_add_isa_interrupts(mc, isa_bus, apicid_sb600, 0); + +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) + + /* usb */ + PCI_INT(0x0, 0x13, 0x0, 0x10); + PCI_INT(0x0, 0x13, 0x1, 0x11); + PCI_INT(0x0, 0x13, 0x2, 0x12); + PCI_INT(0x0, 0x13, 0x3, 0x13); + + /* sata */ + PCI_INT(0x0, 0x12, 0x1, 0x16); + + /* SMBus/ACPI */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + /* IDE */ + PCI_INT(0x0, 0x14, 0x1, 0x11); + /* HDA */ + PCI_INT(0x0, 0x14, 0x2, 0x12); + /* LPC */ + PCI_INT(0x0, 0x14, 0x3, 0x13); + + /* GFX ? */ + PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12); + PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13); + + /* PCIe slots */ + PCI_INT(0x2, 0x00, 0x00, 0x10); + PCI_INT(0x2, 0x00, 0x01, 0x11); + PCI_INT(0x2, 0x00, 0x02, 0x12); + PCI_INT(0x2, 0x00, 0x03, 0x13); + + /* PCIe slots */ + PCI_INT(0x3, 0x00, 0x00, 0x11); + PCI_INT(0x3, 0x00, 0x01, 0x12); + PCI_INT(0x3, 0x00, 0x02, 0x13); + PCI_INT(0x3, 0x00, 0x03, 0x10); + + /* PCIe slots */ + PCI_INT(0x4, 0x00, 0x00, 0x12); + PCI_INT(0x4, 0x00, 0x01, 0x13); + PCI_INT(0x4, 0x00, 0x02, 0x10); + PCI_INT(0x4, 0x00, 0x03, 0x11); + + /* PCIe slots */ + PCI_INT(0x5, 0x00, 0x00, 0x13); + PCI_INT(0x5, 0x00, 0x01, 0x10); + PCI_INT(0x5, 0x00, 0x02, 0x11); + PCI_INT(0x5, 0x00, 0x03, 0x12); + + /* onboard NIC ? */ + PCI_INT(bus_sb600[1], 0x7, 0x0, 0x13); + PCI_INT(bus_sb600[1], 0x7, 0x1, 0x10); + PCI_INT(bus_sb600[1], 0x7, 0x2, 0x11); + PCI_INT(bus_sb600[1], 0x7, 0x3, 0x12); + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + mptable_lintsrc(mc, isa_bus); + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/resourcemap.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/resourcemap.c new file mode 100644 index 0000000..d9ce85c --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_sitemp_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/romstage.c b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/romstage.c new file mode 100644 index 0000000..4beb8c9 --- /dev/null +++ b/src/mainboard/siemens/mb_sitemp_g1_u1p0_u1p1/romstage.c @@ -0,0 +1,194 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2010 Siemens AG, Inc. + * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <spd.h> + +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" + +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> + +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#include "southbridge/amd/rs690/early_setup.c" +#include "southbridge/amd/sb600/early_setup.c" +#include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */ + +#define SERIAL_DEV PNP_DEV(0x2e, CONFIG_UART_FOR_CONSOLE == 1 ? IT8712F_SP2 : IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/ +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +/* called in raminit_f.c */ +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +/*called in raminit_f.c */ +static inline int spd_read_byte(u32 device, u32 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +#define __WARNING__(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) +#define __DEBUG__(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) +#define __INFO__(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; + int needs_reset = 0; + u32 bsp_apicid = 0; + msr_t msr; + struct cpuid_result cpuid1; + struct sys_info *sysinfo = &sysinfo_car; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* sb600_lpc_port80(); */ + sb600_pci_port80(); + } + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge + sb600_lpc_init(); +#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) + check_cmos(); // rebooting in case of corrupted cmos !!!!! +#endif + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + console_init(); +#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) + check_cmos(); // rebooting in case of corrupted cmos !!!!! +#endif + post_code(0x03); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); + + setup_sitemp_resource_map(); + + setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched */ + wait_all_core0_started(); + start_other_cores(); +#endif + wait_all_aps_started(bsp_apicid); + + ht_setup_chains_x(sysinfo); + + /* run _early_setup before soft-reset. */ + rs690_early_setup(); + sb600_early_setup(); + + post_code(0x04); + + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + cpuid1 = cpuid(0x80000007); + if( (cpuid1.edx & 0x6) == 0x6 ) { + + /* Read FIDVID_STATUS */ + msr=rdmsr(0xc0010042); + __DEBUG__("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + /* show final fid and vid */ + msr=rdmsr(0xc0010042); + __DEBUG__("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + } else { + __DEBUG__("Changing FIDVID not supported\n"); + } + + post_code(0x05); + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + rs690_htinit(); + __DEBUG__("needs_reset=0x%x\n", needs_reset); + + post_code(0x06); + + if (needs_reset) { + __INFO__("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now; */ + __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", + sysinfo->nodes, sysinfo->ctrl, spd_addr); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x07); + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_code(0x08); + + rs690_before_pci_init(); // does nothing + sb600_before_pci_init(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig b/src/mainboard/siemens/sitemp_g1p1/Kconfig deleted file mode 100644 index dff329f..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig +++ /dev/null @@ -1,74 +0,0 @@ -if BOARD_SIEMENS_SITEMP_G1P1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - select GFXUMA - select EXT_CONF_SUPPORT - -config MAINBOARD_DIR - string - default siemens/sitemp_g1p1 - -config LINT01_CONVERSION - bool - default y - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MB SITEMP-G1 (U1P0/U1P1)" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config IOMMU - bool - default n - -config HW_SCRUBBER - bool - default n - -config ECC_MEMORY - bool - default n - -endif # BOARD_SIEMENS_SITEMP_G1P1 diff --git a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc b/src/mainboard/siemens/sitemp_g1p1/Makefile.inc deleted file mode 100644 index c6e9706..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc +++ /dev/null @@ -1,22 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -ramstage-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += int15_func.c diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl deleted file mode 100644 index 00e10b8..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - DefinitionBlock ( - "DSDT.AML", - "DSDT", - 0x01, - "XXXXXX", - "XXXXXXXX", - 0x00010001 - ) - { - #include "debug.asl" - } -*/ - -/* -* 0x80: POST_BASE -* 0x3F8: DEBCOM_BASE -* X80: POST_REGION -* P80: PORT80 -* -* CREG: DEBCOM_REGION -* CUAR: DEBCOM_UART -* CDAT: DEBCOM_DATA -* CDLM: DEBCOM_DLM -* DLCR: DEBCOM_LCR -* CMCR: DEBCOM_MCR -* CLSR: DEBCOM_LSR -* -* DEBUG_INIT DINI -*/ - -OperationRegion(X80, SystemIO, 0x80, 1) - Field(X80, ByteAcc, NoLock, Preserve) -{ - P80, 8 -} - -OperationRegion(CREG, SystemIO, 0x3F8, 8) - Field(CREG, ByteAcc, NoLock, Preserve) -{ - CDAT, 8, - CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8 -} - -/* -* DINI -* Initialize the COM port to 115,200 8-N-1 -*/ -Method(DINI) -{ - store(0x83, DLCR) - store(0x01, CDAT) /* 115200 baud (low) */ - store(0x00, CDLM) /* 115200 baud (high) */ - store(0x03, DLCR) /* word=8 stop=1 parity=none */ - store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */ - store(0x00, CDLM) /* turn off interrupts */ -} - -/* -* THRE -* Wait for COM port transmitter holding register to go empty -*/ -Method(THRE) -{ - and(CLSR, 0x20, local0) - while (Lequal(local0, Zero)) { - and(CLSR, 0x20, local0) - } -} - -/* -* OUTX -* Send a single raw character -*/ -Method(OUTX, 1) -{ - THRE() - store(Arg0, CDAT) -} - -/* -* OUTC -* Send a single character, expanding LF into CR/LF -*/ -Method(OUTC, 1) -{ - if (LEqual(Arg0, 0x0a)) { - OUTX(0x0d) - } - OUTX(Arg0) -} - -/* -* DBGN -* Send a single hex nibble -*/ -Method(DBGN, 1) -{ - and(Arg0, 0x0f, Local0) - if (LLess(Local0, 10)) { - add(Local0, 0x30, Local0) - } else { - add(Local0, 0x37, Local0) - } - OUTC(Local0) -} - -/* -* DBGB -* Send a hex byte -*/ -Method(DBGB, 1) -{ - ShiftRight(Arg0, 4, Local0) - DBGN(Local0) - DBGN(Arg0) -} - -/* -* DBGW -* Send a hex word -*/ -Method(DBGW, 1) -{ - ShiftRight(Arg0, 8, Local0) - DBGB(Local0) - DBGB(Arg0) -} - -/* -* DBGD -* Send a hex Dword -*/ -Method(DBGD, 1) -{ - ShiftRight(Arg0, 16, Local0) - DBGW(Local0) - DBGW(Arg0) -} - -/* -* DBGO -* Send either a string or an integer -*/ -Method(DBGO, 1) -{ - /* DINI() */ - if (LEqual(ObjectType(Arg0), 1)) { - if (LGreater(Arg0, 0xffff)) { - DBGD(Arg0) - } else { - if (LGreater(Arg0, 0xff)) { - DBGW(Arg0) - } else { - DBGB(Arg0) - } - } - } else { - Name(BDBG, Buffer(80) {}) - store(Arg0, BDBG) - store(0, Local1) - while (One) { - store(GETC(BDBG, Local1), Local0) - if (LEqual(Local0, 0)) { - return (0) - } - OUTC(Local0) - Increment(Local1) - } - } - return (0) -} - -/* Get a char from a string */ -Method(GETC, 2) -{ - CreateByteField(Arg0, Arg1, DBGC) - return (DBGC) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl deleted file mode 100644 index c09392e..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl +++ /dev/null @@ -1,316 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Supported sleep states: */ -Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ -Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ -Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ -Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ -Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ -Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - -Name(_SB.CSPS ,0) /* Current Sleep State (S0, ... , S5) */ -Name(CSMS, 0) /* Current System State */ - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* _PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) -} /* End Method(_PTS) */ - -/* -* The following method results in a "not a valid reserved NameSeg" -* warning so I have commented it out for the duration. It isn't -* used, so it could be removed. -* -* -* _GTS OEM Going To Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -* -* Method(_GTS, 1) { -* DBGO("\_GTS\n") -* DBGO("From S0 to S") -* DBGO(Arg0) -* DBGO("\n") -* } -*/ - -/* -* _BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* _WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) -} /* End Method(_WAK) */ - -Scope(_GPE) { /* Start Scope GPE */ - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event */ - /* SATA Hot Plug Support -> acpi/sata.asl */ -} /* End Scope GPE */ diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl deleted file mode 100644 index 5923bff..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl +++ /dev/null @@ -1,218 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope(_SB) { - #include "globutil.asl" -} -*/ - -/* string compare functions */ -Method(MIN, 2) -{ - if (LLess(Arg0, Arg1)) { - Return(Arg0) - } else { - Return(Arg1) - } -} - -Method(SLEN, 1) -{ - Store(Arg0, Local0) - Return(Sizeof(Local0)) -} - -Method(S2BF, 1) -{ - Add(SLEN(Arg0), One, Local0) - Name(BUFF, Buffer(Local0) {}) - Store(Arg0, BUFF) - Return(BUFF) -} - -/* Strong string compare. Checks both length and content */ -Method(SCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - Store(Zero, Local4) - Store(SLEN(Arg0), Local5) - Store(SLEN(Arg1), Local6) - Store(MIN(Local5, Local6), Local7) - - While(LLess(Local4, Local7)) { - Store(Derefof(Index(Local0, Local4)), Local2) - Store(Derefof(Index(Local1, Local4)), Local3) - if (LGreater(Local2, Local3)) { - Return(One) - } else { - if (LLess(Local2, Local3)) { - Return(Ones) - } - } - Increment(Local4) - } - if (LLess(Local4, Local5)) { - Return(One) - } else { - if (LLess(Local4, Local6)) { - Return(Ones) - } else { - Return(Zero) - } - } -} - -/* Weak string compare. Checks to find Arg1 at beginning of Arg0. -* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on -* Pass. -*/ -Method(WCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - if (LLess(SLEN(Arg0), SLEN(Arg1))) { - Return(0) - } - Store(Zero, Local2) - Store(SLEN(Arg1), Local3) - - While(LLess(Local2, Local3)) { - if (LNotEqual(Derefof(Index(Local0, Local2)), - Derefof(Index(Local1, Local2)))) { - Return(0) - } - Increment(Local2) - } - Return(One) -} - -/* ARG0 = IRQ Number(0-15) -* Returns Bit Map -*/ -Method(I2BM, 1) -{ - Store(0, Local0) - if (LNotEqual(ARG0, 0)) { - Store(1, Local1) - ShiftLeft(Local1, ARG0, Local0) - } - Return(Local0) -} -Method (SEQL, 2, Serialized) -{ - Store (SizeOf (Arg0), Local0) - Store (SizeOf (Arg1), Local1) - If (LNot (LEqual (Local0, Local1))) { Return (Zero) } - - Name (BUF0, Buffer (Local0) {}) - Store (Arg0, BUF0) - Name (BUF1, Buffer (Local0) {}) - Store (Arg1, BUF1) - Store (Zero, Local2) - While (LLess (Local2, Local0)) - { - Store (DerefOf (Index (BUF0, Local2)), Local3) - Store (DerefOf (Index (BUF1, Local2)), Local4) - If (LNot (LEqual (Local3, Local4))) { Return (Zero) } - - Increment (Local2) - } - - Return (One) -} - -/* GetMemoryResources(Node, Link) */ -Method (GMEM, 2, NotSerialized) -{ - Name (BUF0, ResourceTemplate () - { - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x00000000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000001,,, - , AddressRangeMemory, TypeStatic) - }) - CreateDWordField (BUF0, 0x0A, MMIN) - CreateDWordField (BUF0, 0x0E, MMAX) - CreateDWordField (BUF0, 0x16, MLEN) - Store (0x00, Local0) - Store (0x00, Local4) - Store (0x00, Local3) - While (LLess (Local0, 0x10)) - { - /* Get value of the first register */ - Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local1) - Increment (Local0) - Store (DerefOf (Index (_SB.PCI0.MMIO, Local0)), Local2) - If (LEqual (And (Local1, 0x03), 0x03)) /* Pair enabled? */ - { - If (LEqual (Arg0, And (Local2, 0x07))) /* Node matches? */ - { - /* If Link Matches (or we got passed 0xFF) */ - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) - { - /* Extract the Base and Limit values */ - Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) - Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) - Or (MMAX, 0xFFFF, MMAX) - Subtract (MMAX, MMIN, MLEN) - Increment (MLEN) - - If (Local4) /* I've already done this once */ - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - Store (RTAG (BUF0), Local3) - } - - Increment (Local4) - } - } - } - - Increment (Local0) - } - - If (LNot (Local4)) /* No resources for this node and link. */ - { - Store (RTAG (BUF0), Local3) - } - - Return (Local3) -} - -Method (RTAG, 1, NotSerialized) -{ - Store (Arg0, Local0) - Store (SizeOf (Local0), Local1) - Subtract (Local1, 0x02, Local1) - Multiply (Local1, 0x08, Local1) - CreateField (Local0, 0x00, Local1, RETB) - Store (RETB, Local2) - Return (Local2) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl deleted file mode 100644 index 7b8c3bb..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl +++ /dev/null @@ -1,249 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(IDEC, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(IDEC, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* 0x40: 0:7 Primary PIO Slave Timing */ - PPTM, 8, /* 0x40: 8:15 Primary PIO Master Timing */ - OFFSET(0x04), - PMTS, 8, /* 0x44: 0:7 Primary MWDMA Slave Timing */ - PMTM, 8, /* 0x44: 7:15 Primary MWDMA Master Timing */ - OFFSET(0x08), - PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), - PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), - PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), - PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRIM) -{ - Name (_ADR, 0) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl deleted file mode 100644 index 8af607d..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -Name(PCIF, 0) - -Method(_PIC, 1, NotSerialized) -{ - Store(Arg0, PCIF) - If (Arg0) - { - _SB.PCI0.LPC0.CIRQ() - } -} - -External (_PR.CPU0, DeviceObj) -External (_PR.CPU1, DeviceObj) - -Scope(_SB) -{ - - Method(_INI, 0) - { - Store (2000, OSYS) - - If (CondRefOf(_OSI, Local0)) { - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - } -} \ No newline at end of file diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl deleted file mode 100644 index c7be29e..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Routing is in System Bus scope */ -Scope(_SB) -{ - Name(PR0, Package(){ - /* NB devices */ - /* SB devices */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, _SB.PCI0.LPC0.INTG, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0013FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0013FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0013FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0014FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0014FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0014FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* SB devices in APIC mode */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0005FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0005FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0005FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, _SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 1, _SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 2, _SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 3, _SB.PCI0.LPC0.INTC, 0 }, - }) - - Name(APS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 1 behind Dev14, Fun4. */ - Package(){0x005FFFF, 0, _SB.PCI0.LPC0.INTF, 0 }, // Phoenix does it - Package(){0x005FFFF, 1, _SB.PCI0.LPC0.INTG, 0 }, // Phoenix does it - Package(){0x004FFFF, 0, _SB.PCI0.LPC0.INTE, 0 }, - Package(){0x004FFFF, 1, _SB.PCI0.LPC0.INTF, 0 }, - Package(){0x004FFFF, 2, _SB.PCI0.LPC0.INTG, 0 }, - Package(){0x004FFFF, 3, _SB.PCI0.LPC0.INTH, 0 }, - }) - - Name(AP2P, Package(){ - /* PCI slots: slot 0 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 21 }, // Phoenix does it - Package(){0x0005FFFF, 1, 0, 22 }, // Phoenix does it - Package(){0x0004FFFF, 0, 0, 20 }, - Package(){0x0004FFFF, 1, 0, 21 }, - Package(){0x0004FFFF, 2, 0, 22 }, - Package(){0x0004FFFF, 3, 0, 23 }, - }) - -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl deleted file mode 100644 index 3208830..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.SATA.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.SATA.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.SATA.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.SATA.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl deleted file mode 100644 index bdee1b2..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -/* Status and notification definitions */ - -#define STA_MISSING 0x00 -#define STA_PRESENT 0x01 -#define STA_ENABLED 0x03 -#define STA_DISABLED 0x09 -#define STA_INVISIBLE 0x0B -#define STA_UNAVAILABLE 0x0D -#define STA_VISIBLE 0x0F - -/* SMBus status codes */ -#define SMB_OK 0x00 -#define SMB_UnknownFail 0x07 -#define SMB_DevAddrNAK 0x10 -#define SMB_DeviceError 0x11 -#define SMB_DevCmdDenied 0x12 -#define SMB_UnknownErr 0x13 -#define SMB_DevAccDenied 0x17 -#define SMB_Timeout 0x18 -#define SMB_HstUnsuppProtocol 0x19 -#define SMB_Busy 0x1A -#define SMB_PktChkError 0x1F - -/* Device Object Notification Values */ -#define NOTIFY_BUS_CHECK 0x00 -#define NOTIFY_DEVICE_CHECK 0x01 -#define NOTIFY_DEVICE_WAKE 0x02 -#define NOTIFY_EJECT_REQUEST 0x03 -#define NOTIFY_DEVICE_CHECK_JR 0x04 -#define NOTIFY_FREQUENCY_ERROR 0x05 -#define NOTIFY_BUS_MODE 0x06 -#define NOTIFY_POWER_FAULT 0x07 -#define NOTIFY_CAPABILITIES 0x08 -#define NOTIFY_PLD_CHECK 0x09 -#define NOTIFY_SLIT_UPDATE 0x0B - -/* Battery Device Notification Values */ -#define NOTIFY_BAT_STATUSCHG 0x80 -#define NOTIFY_BAT_INFOCHG 0x81 -#define NOTIFY_BAT_MAINTDATA 0x82 - -/* Power Source Object Notification Values */ -#define NOTIFY_PWR_STATUSCHG 0x80 - -/* Thermal Zone Object Notification Values */ -#define NOTIFY_TZ_STATUSCHG 0x80 -#define NOTIFY_TZ_TRIPPTCHG 0x81 -#define NOTIFY_TZ_DEVLISTCHG 0x82 -#define NOTIFY_TZ_RELTBLCHG 0x83 - -/* Power Button Notification Values */ -#define NOTIFY_POWER_BUTTON 0x80 - -/* Sleep Button Notification Values */ -#define NOTIFY_SLEEP_BUTTON 0x80 - -/* Lid Notification Values */ -#define NOTIFY_LID_STATUSCHG 0x80 - -/* Processor Device Notification Values */ -#define NOTIFY_CPU_PPCCHG 0x80 -#define NOTIFY_CPU_CSTATECHG 0x81 -#define NOTIFY_CPU_THROTLCHG 0x82 - -/* User Presence Device Notification Values */ -#define NOTIFY_USR_PRESNCECHG 0x80 - -/* Battery Device Notification Values */ -#define NOTIFY_ALS_ILLUMCHG 0x80 -#define NOTIFY_ALS_COLORTMPCHG 0x81 -#define NOTIFY_ALS_RESPCHG 0x82 diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl deleted file mode 100644 index 02b1df1..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - */ - -/* THERMAL */ -Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - // Processors used for active cooling - Method (_PSL, 0, Serialized) - { - If (MPEN) { - Return (Package() {_PR.CPU0, _PR.CPU1}) - } - Return (Package() {_PR.CPU0}) - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl deleted file mode 100644 index ba2fe76..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB_.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB_.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB_.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB_.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB_.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB_.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB_.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB_.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB_.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB_.PT9D) - } - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c deleted file mode 100644 index a982883..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <../../../northbridge/amd/amdk8/acpi.h> -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> -#include <southbridge/amd/rs690/rs690.h> -#include "mainboard.h" -#include <cbmem.h> - -#define GLOBAL_VARS_SIZE 0x100 - -typedef struct { - /* Miscellaneous */ - u16 osys; - u16 linx; - u32 pcba; - u8 mpen; - u8 reserv[247]; -} __attribute__((packed)) global_vars_t; - -static void acpi_write_gvars(global_vars_t *gvars) -{ - device_t dev; - struct resource *res; - - memset((void *)gvars, 0, GLOBAL_VARS_SIZE); - - gvars->pcba = EXT_CONF_BASE_ADDRESS; - dev = dev_find_slot(0, PCI_DEVFN(0,0)); - res = probe_resource(dev, 0x1C); - if( res ) - gvars->pcba = res->base; - - gvars->mpen = 1; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); -#if !CONFIG_LINT01_CONVERSION - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); -#else - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - /* 1: LINT1 connect to NMI */ - set_nbcfg_enable_bits(dev_find_slot(0, PCI_DEVFN(0x18, 0)), 0x68, 1 << 16, 1 << 16); // Local Interrupt Conversion Enable -#endif - return current; -} - -void mainboard_inject_dsdt(void) -{ - global_vars_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, GLOBAL_VARS_SIZE); - - if (gnvs) { - int scopelen; - memset(gnvs, 0, sizeof(*gnvs)); - acpi_write_gvars(gnvs); - - /* Add it to SSDT. */ - scopelen = acpigen_write_scope("\"); - scopelen += acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_patch_len(scopelen - 1); - } -} - diff --git a/src/mainboard/siemens/sitemp_g1p1/board_info.txt b/src/mainboard/siemens/sitemp_g1p1/board_info.txt deleted file mode 100644 index 7680e6f..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.default b/src/mainboard/siemens/sitemp_g1p1/cmos.default deleted file mode 100644 index 5e47a19..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.default +++ /dev/null @@ -1,24 +0,0 @@ -last_boot=Fallback -boot_option=Fallback -baud_rate=115200 -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -sata_mode=AHCI -boot_devices='' -multi_core=Enable -cpu_fan_control=Disable -chassis_fan_control=Disable -cpu_fan_polarity=Active_high -chassis_fan_polarity=Active_high -cpu_t_min=45 -cpu_t_max=65 -cpu_dutycycle_min=30% -cpu_dutycycle_max=90% -chassis_t_min=40 -chassis_t_max=70 -chassis_dutycycle_min=25% -chassis_dutycycle_max=90% -lcd_panel_id=no_panel -boot_delay=off -boot_default=0 diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.layout b/src/mainboard/siemens/sitemp_g1p1/cmos.layout deleted file mode 100644 index c5a99af..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.layout +++ /dev/null @@ -1,206 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -## -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ======================================================= -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ======================================================= -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ======================================================== -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -# ======================================================== -#384 1 r 0 unused -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -#386 2 r 1 unused -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -#395 1 r 1 unused -#396 1 r 1 unused -#397 2 r 8 unused -399 1 e 2 multi_core -#400 8 r 18 reserved -408 4 e 6 debug_level -412 1 e 1 power_on_after_fail -#413 1 r 1 unused -414 1 e 17 sata_mode -415 1 e 1 nmi -416 1 e 1 cpu_fan_control -417 1 e 1 chassis_fan_control -418 1 e 13 cpu_fan_polarity -419 1 e 13 chassis_fan_polarity -420 4 e 14 cpu_t_min -424 4 e 14 cpu_t_max -428 4 e 15 cpu_dutycycle_min -432 4 e 15 cpu_dutycycle_max -436 4 e 14 chassis_t_min -440 4 e 14 chassis_t_max -444 4 e 15 chassis_dutycycle_min -448 4 e 15 chassis_dutycycle_max -#452 4 r 9 unused -456 4 e 10 boot_delay -460 4 e 11 lcd_panel_id -#=========================================================== -464 512 s 0 boot_devices -976 8 h 0 boot_default -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 4 Warning -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -#7 0 Network -#7 1 HDD -#7 2 Floppy -#7 8 Fallback_Network -#7 9 Fallback_HDD -#7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -# boot delay -10 0 off -10 1 1s -10 2 2s -10 3 3s -10 4 4s -10 5 5s -10 6 6s -10 7 7s -10 8 8s -10 9 9s -10 10 10s -# LCD Panel ID -11 0 no_panel -11 1 1024x768_65MHz_Dual -11 2 1920x1200_162MHz -11 3 1600x1200_162MHz -11 4 1024x768_65MHz -11 5 1400x1050_108MHz -11 6 1680x1050_119MHz -11 7 2048x1536_164MHz -11 8 1280x1024_108MHz -11 9 1366x768_86MHz_chimei_V32B1L01 -# TV Standard -#12 0 NTSC -#12 1 PAL -#12 2 PALM -#12 3 PAL60 -#12 4 NTSCJ -#12 5 PALCN -#12 6 PALN -#12 9 SCART-RGB -#12 15 no_tv -# CPU/Chassis FAN Control: polarity -13 0 Active_high -13 1 Active_low -# Temperature �C -14 0 30 -14 1 35 -14 2 40 -14 3 45 -14 4 50 -14 5 55 -14 6 60 -14 7 65 -14 8 70 -14 9 75 -14 10 80 -14 11 85 -14 12 90 -14 13 95 -14 14 100 -# Dutycycle % -15 0 25% -15 1 30% -15 2 35% -15 3 40% -15 4 45% -15 5 50% -15 6 55% -15 7 60% -15 8 65% -15 9 70% -15 10 75% -15 11 80% -15 12 85% -15 13 90% -15 14 95% -15 15 100% -# sata_mode -17 0 AHCI -17 1 IDE -# reserved -18 32 2000 -# ============================== -checksums - -checksum 392 983 984 diff --git a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb b/src/mainboard/siemens/sitemp_g1p1/devicetree.cb deleted file mode 100644 index 1d83f10..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb +++ /dev/null @@ -1,135 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x110a 0x4076 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on # Northbridge configuration space (0x7910) - end - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on # Internal Graphics 0x791F - end - device pci 5.2 on # - end - end - device pci 2.0 on # PCIE P2P bridge 0x7913 (external GFX-port0) - end - device pci 3.0 off # PCIE P2P bridge 0x791b (external GFX-port1) - end - device pci 4.0 on # PCIE P2P bridge port 0 (0x7914) - end - device pci 5.0 on # PCIE P2P bridge port 1 (0x7915) - end - device pci 6.0 on # PCIE P2P bridge port 2 (0x7916) - end - device pci 7.0 on # PCIE P2P bridge port 3 (0x7917) - end - device pci 8.0 off # NB/SB Link P2P bridge - end - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "1" # needed for DVI output, but this results in a conflict if PLX installed ! - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" # 4 (0x8) if PLX installed - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e -# register "ide0_enable" = "1" -# register "sata0_enable" = "1" - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex - diff --git a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl b/src/mainboard/siemens/sitemp_g1p1/dsdt.asl deleted file mode 100644 index e106561..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl +++ /dev/null @@ -1,1313 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <arch/ioapic.h> -#include <cpu/x86/lapic_def.h> - -DefinitionBlock ("DSDT.aml", "DSDT", 2, "SIEMENS", "SITEMP ", 0x20101005) -{ - /* Data to be patched by the BIOS during POST */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - Name(DSEN, 1) // Display Output Switching Enable - // Power notification - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - External(\NVSA) - - OperationRegion (GVAR, SystemMemory, \NVSA, 0x100) - Field (GVAR, ByteAcc, NoLock, Preserve) - { - Offset (0x00), - OSYS, 16, - LINX, 16, - PCBA, 32, - MPEN, 8 - } - - Name (IOLM,0xe0000000) - -#include "acpi/platform.asl" - - Scope(_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x2000000) /* PCIe reserved space for 31 busses */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - Offset(0x00090024), /* Byte offset to SATA BAR5 register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(BAR5, SystemMemory, STB5, 0x1000) - Field(BAR5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } -#include "acpi/event.asl" -#include "acpi/routing.asl" -#include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) - { - /* Start _SB scope */ - -#include "acpi/globutil.asl" - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) - { - External (MMIO) - External (TOM1) - External (TOM2) - - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Device (MEMR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (MEM1, ResourceTemplate () - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1A) - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1B) - }) - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1A._BAS, MB01) - CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1A._LEN, ML01) - CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1B._BAS, MB02) - CreateDWordField (MEM1, _SB.PCI0.MEMR._Y1B._LEN, ML02) - If (PCIF) - { - Store (IO_APIC_ADDR, MB01) - Store (LOCAL_APIC_ADDR, MB02) - Store (0x1000, ML01) - Store (0x1000, ML02) - } - - Return (MEM1) - } - } - - Method(_PRT,0) { - If(PCIF){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - OperationRegion (BAR1, PCI_Config, 0x14, 0x04) - Field (BAR1, ByteAcc, NoLock, Preserve) - { - Z009, 32 - } - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { Return (APR1) } - - Device (VGA) - { - Name (_ADR, 0x00050000) - Method (_DOS, 1) - { - /* Windows 2000 and Windows XP call _DOS to enable/disable - * Display Output Switching during init and while a switch - * is already active - */ - Store (And(Arg0, 7), DSEN) - } - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* PCI slot 1 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {4, 5}) // Phoenix doeas it so - Method(_PRT, 0) { - If(PCIF){ Return(AP2P) } /* APIC Mode */ - Return (PCIB) /* PIC Mode */ - } - } - - /* Describe the Southbridge devices */ - Device(SATA) { - Name(_ADR, 0x00120000) -#include "acpi/sata.asl" - } /* end SATA */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(LINX,1)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LPC0) - { - Name (_ADR, 0x00140003) - Mutex (PSMX, 0x00) - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, SINT) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){10,11} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINA, IRQ0) - Return(Local0) - } /* Method(_SB.INTA._CRS) */ - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement (Local0) - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINB, IRQ0) - Return(Local0) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINC, IRQ0) - Return(Local0) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PIND, IRQ0) - Return(Local0) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINE, IRQ0) - Return(Local0) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINF, IRQ0) - Return(Local0) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PING, IRQ0) - Return(Local0) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINH, IRQ0) - Return(Local0) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible)*/ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {8} - IO(Decode16,0x0070, 0x0070, 1, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {0} - IO(Decode16, 0x0040, 0x0040, 1, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 1, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {2} - IO(Decode16,0x0020, 0x0020, 1, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,NotBusMaster,Transfer8_16){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 1, 0x10) - IRQ (Edge, ActiveHigh, Exclusive, ) {13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPET) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } - - Device (KBC0) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0060, // Range Minimum - 0x0060, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IO (Decode16, - 0x0064, // Range Minimum - 0x0064, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IRQ (Edge, ActiveHigh, Exclusive, ) {1} - }) - } - - Device (MSE0) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQ (Edge, ActiveHigh, Exclusive, ) {12} - }) - } - } /* end LPC0 */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - -/* ############################################################################################### */ - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - DWORDMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0, 0, 0, 0x00, 1, ,, EMM2) - WORDIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x00, 0x0D00, 0xffff, 0x00, 0xf300) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - - CreateDWordField(CRES, ^EMM2._MIN, EM2B) - CreateDWordField(CRES, ^EMM2._MAX, EM2E) - CreateDWordField(CRES, ^EMM2._LEN, EM2L) - - Store(TOM1, EM2B) - Subtract(IOLM, 1, EM2E) - Subtract(IOLM, TOM1, EM2L) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - Return(CRES) /* note to change the Name buffer */ - } -/* ########################################################################################## */ - } /* End Device(PCI0) */ - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x10) // 0x0C replace by 0x10 - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8, /* SMBUS slave data */ - SMK1, 8, - SLMC, 8, - RADD, 8, - SADD, 8 - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } -#include "acpi/thermal.asl" -} diff --git a/src/mainboard/siemens/sitemp_g1p1/fadt.c b/src/mainboard/siemens/sitemp_g1p1/fadt.c deleted file mode 100644 index f9acfe4..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/fadt.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include <../southbridge/amd/sb600/sb600.h> - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb acpi */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->oem_revision = 0x20101005; - header->asl_compiler_revision = 3; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in _PR.CPU0, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c b/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c deleted file mode 100644 index 084e2b1..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.c b/src/mainboard/siemens/sitemp_g1p1/int15_func.c deleted file mode 100644 index 31dd6e2..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/interrupt.h> -#include <x86emu/regs.h> -#include "int15_func.h" - -int sbios_INT15_handler(void); -/*extern*/ unsigned long vgainfo_addr; - -static INT15_function_extensions __int15_func; - -/* System BIOS int15 function */ -int sbios_INT15_handler(void) -{ - int res = -1; - - printk(BIOS_DEBUG, "System BIOS INT 15h\n"); - - switch (X86_EAX & 0xffff) { -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - case 0x5f35: - X86_EAX = 0x5f; - X86_ECX = BOOT_DISPLAY_DEFAULT; - res = 0; - break; - case 0x5f40: - X86_EAX = 0x5f; - X86_ECX = 3; // This is mainboard specific - printk(BIOS_DEBUG, "DISPLAY=%x\n", X86_ECX); - res = 0; - break; - case 0x4e08: - switch (X86_EBX & 0xff) { - case 0x00: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func00_LCD_panel_id; - printk(BIOS_DEBUG, "DISPLAY = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x02: - break; - case 0x05: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func05_TV_standard; - printk(BIOS_DEBUG, "TV = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x80: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", X86_EDX, X86_EDI); - vgainfo_addr = (X86_EDX * 16) + X86_EDI; - res = 0; - break; - case 0x89: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Get supported display device information\n"); - res = 0; - break; - default: - break; - } - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", X86_EAX & 0xffff); - break; - } - - return res; -} - -/* Initialization VBIOS function extensions */ -void install_INT15_function_extensions(INT15_function_extensions *int15_func) -{ - printk(BIOS_DEBUG, "Initialize function extensions for Callback function number 04E08h ..\n"); - __int15_func.regs.func00_LCD_panel_id = int15_func->regs.func00_LCD_panel_id; - __int15_func.regs.func05_TV_standard = int15_func->regs.func05_TV_standard; - mainboard_interrupt_handlers(0x15, &sbios_INT15_handler); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.h b/src/mainboard/siemens/sitemp_g1p1/int15_func.h deleted file mode 100644 index 26f679e..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -typedef struct { - u8 func00_LCD_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID - u8 func02_set_expansion; - u8 func05_TV_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard - u16 func80_sysinfo_table; -}INT15_regs; - -typedef struct { - INT15_regs regs; -}INT15_function_extensions; - -extern void install_INT15_function_extensions(INT15_function_extensions *); diff --git a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c b/src/mainboard/siemens/sitemp_g1p1/irq_tables.c deleted file mode 100644 index ad00da6..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, 0); - pirq_info++; - slot_num++; - - /* ide */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 1, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c deleted file mode 100644 index 77be0af..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ /dev/null @@ -1,855 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <delay.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/sb600/sb600.h> -#include <southbridge/amd/rs690/chip.h> -#include <southbridge/amd/rs690/rs690.h> -#include <superio/ite/it8712f/it8712f.h> -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL -#include <x86emu/x86emu.h> -#endif -#include "int15_func.h" -#include "mainboard.h" - -// ****LCD panel ID support: ***** -// Callback Sub-Function 00h - Get LCD Panel ID -#define PANEL_TABLE_ID_NO 0 // no LCD -#define PANEL_TABLE_ID1 1 // 1024x768_65MHz_Dual -#define PANEL_TABLE_ID2 2 // 920x1200_162MHz -#define PANEL_TABLE_ID3 3 // 600x1200_162MHz -#define PANEL_TABLE_ID4 4 // 1024x768_65MHz -#define PANEL_TABLE_ID5 5 // 1400x1050_108MHz -#define PANEL_TABLE_ID6 6 // 1680x1050_119MHz -#define PANEL_TABLE_ID7 7 // 2048x1536_164MHz -#define PANEL_TABLE_ID8 8 // 1280x1024_108MHz -#define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01 - -// Callback Sub-Function 05h � Select Boot-up TV Standard -#define TV_MODE_00 0x00 /* NTSC */ -#define TV_MODE_01 0x01 /* PAL */ -#define TV_MODE_02 0x02 /* PALM */ -#define TV_MODE_03 0x03 /* PAL60 */ -#define TV_MODE_04 0x04 /* NTSCJ */ -#define TV_MODE_05 0x05 /* PALCN */ -#define TV_MODE_06 0x06 /* PALN */ -#define TV_MODE_09 0x09 /* SCART-RGB */ -#define TV_MODE_NO 0xff /* No TV Support */ - -#define PLX_VIDDID 0x861610b5 - -/* 7475 Common Registers */ -#define REG_DEVREV2 0x12 /* ADT7490 only */ -#define REG_VTT 0x1E /* ADT7490 only */ -#define REG_EXTEND3 0x1F /* ADT7490 only */ -#define REG_VOLTAGE_BASE 0x20 -#define REG_TEMP_BASE 0x25 -#define REG_TACH_BASE 0x28 -#define REG_PWM_BASE 0x30 -#define REG_PWM_MAX_BASE 0x38 -#define REG_DEVID 0x3D -#define REG_VENDID 0x3E -#define REG_DEVID2 0x3F -#define REG_STATUS1 0x41 -#define REG_STATUS2 0x42 -#define REG_VID 0x43 /* ADT7476 only */ -#define REG_VOLTAGE_MIN_BASE 0x44 -#define REG_VOLTAGE_MAX_BASE 0x45 -#define REG_TEMP_MIN_BASE 0x4E -#define REG_TEMP_MAX_BASE 0x4F -#define REG_TACH_MIN_BASE 0x54 -#define REG_PWM_CONFIG_BASE 0x5C -#define REG_TEMP_TRANGE_BASE 0x5F -#define REG_PWM_MIN_BASE 0x64 -#define REG_TEMP_TMIN_BASE 0x67 -#define REG_TEMP_THERM_BASE 0x6A -#define REG_REMOTE1_HYSTERSIS 0x6D -#define REG_REMOTE2_HYSTERSIS 0x6E -#define REG_TEMP_OFFSET_BASE 0x70 -#define REG_CONFIG2 0x73 -#define REG_EXTEND1 0x76 -#define REG_EXTEND2 0x77 -#define REG_CONFIG1 0x40 // ADT7475 -#define REG_CONFIG3 0x78 -#define REG_CONFIG5 0x7C -#define REG_CONFIG6 0x10 // ADT7475 -#define REG_CONFIG7 0x11 // ADT7475 -#define REG_CONFIG4 0x7D -#define REG_STATUS4 0x81 /* ADT7490 only */ -#define REG_VTT_MIN 0x84 /* ADT7490 only */ -#define REG_VTT_MAX 0x86 /* ADT7490 only */ - -#define VID_VIDSEL 0x80 /* ADT7476 only */ - -#define CONFIG2_ATTN 0x20 -#define CONFIG3_SMBALERT 0x01 -#define CONFIG3_THERM 0x02 -#define CONFIG4_PINFUNC 0x03 -#define CONFIG4_MAXDUTY 0x08 -#define CONFIG4_ATTN_IN10 0x30 -#define CONFIG4_ATTN_IN43 0xC0 -#define CONFIG5_TWOSCOMP 0x01 -#define CONFIG5_TEMPOFFSET 0x02 -#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ -#define REMOTE1 0 -#define LOCAL 1 -#define REMOTE2 2 - -/* ADT7475 Settings */ -#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ -#define ADT7475_TEMP_COUNT 3 -#define ADT7475_TACH_COUNT 4 -#define ADT7475_PWM_COUNT 3 - -/* Macros to easily index the registers */ -#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) -#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) - -#define PWM_REG(idx) (REG_PWM_BASE + (idx)) -#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) -#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) -#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) - -#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) -#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) -#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) - -#define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) -#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) -#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) -#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) -#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) -#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) -#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) - -#define SMBUS_IO_BASE 0x1000 -#define ADT7475_ADDRESS 0x2E - -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRAME (1 << 3) -#define A_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); - -static u32 smbus_io_base = SMBUS_IO_BASE; -static u32 adt7475_address = ADT7475_ADDRESS; - -/* Macro to read the registers */ -#define adt7475_read_byte(reg) \ - do_smbus_read_byte(smbus_io_base, adt7475_address, reg) - -#define adt7475_write_byte(reg, val) \ - do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) - -#define TWOS_COMPL 1 - -struct __table__{ - const char *info; - u8 val; -}; - -struct __table__ dutycycles[] = { - {"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73}, - {"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4}, - {"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5}, - {"100%", 0xff} -}; -#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__) -#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix -#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range" -#if TWOS_COMPL == 0 -struct __table__ temperatures[] = { - {"30�C", 0x5e},{"35�C", 0x63},{"40�C", 0x68},{"45�C", 0x6d},{"50�C", 0x72}, - {"55�C", 0x77},{"60�C", 0x7c},{"65�C", 0x81},{"70�C", 0x86},{"75�C", 0x8b}, - {"80�C", 0x90} -}; -#else -struct __table__ temperatures[] = { - {"30�C", 30},{"35�C", 35},{"40�C", 40},{"45�C", 45},{"50�C", 50}, - {"55�C", 55},{"60�C", 60},{"65�C", 65},{"70�C", 70},{"75�C", 75}, - {"80�C", 80} -}; -#endif -int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0}; - -#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__) -#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix -#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range" - -struct fan_control { - unsigned int enable : 1; - u8 polarity; - u8 t_min; - u8 t_max; - u8 pwm_min; - u8 pwm_max; - u8 t_range; -}; -/* ############################################################################################# */ -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL -static int int15_handler(void) -{ -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - - printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", - __func__, X86_AX, X86_BX, X86_CX, X86_DX); - - switch (X86_AX) { - case 0x4e08: /* Boot Display */ - switch (X86_BX) { - case 0x80: - X86_AX &= ~(0xff); // Success - X86_BX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information\n"); - break; - case 0x00: - X86_AX &= ~(0xff); - X86_BX = 0x00; - printk(BIOS_DEBUG, "Panel ID = 0\n"); - break; - case 0x05: - X86_AX &= ~(0xff); - X86_BX = 0xff; - printk(BIOS_DEBUG, "TV = off\n"); - break; - default: - return 0; - } - break; - case 0x5f35: /* Boot Display */ - X86_AX = 0x005f; // Success - X86_CL = BOOT_DISPLAY_DEFAULT; - break; - case 0x5f40: /* Boot Panel Type */ - // M.x86.R_AX = 0x015f; // Supported but failed - X86_AX = 0x005f; // Success - X86_CL = 3; // Display ID - break; - default: - /* Interrupt was not handled */ - return 0; - } - - /* Interrupt handled */ - return 1; -} -#endif -/* ############################################################################################# */ - - /** - * @brief - * - * @param - */ - -static u8 calc_trange(u8 t_min, u8 t_max) { - - u8 prev; - int i; - int diff = t_max - t_min; - - // walk through the trange table - for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { - if( trange[i] < diff ) { - prev = i; // save last val - continue; - } - if( diff == trange[i] ) return i; - if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index - return i; - } - return prev; -} - -/******************************************************** -* sina uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void cable_detect(void) -{ - - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ - printk(BIOS_DEBUG, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - /* IDE Controller (Device 20, Function 1) on SB600 */ - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - - byte = pci_read_config8(ide_dev, 9); - printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility"); - - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) ) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0)); - pci_write_config8(ide_dev, 0x56, byte); -} - -/** - * @brief Detect the ADT7475 device - * - * @param - */ - -static const char * adt7475_detect( void ) { - - int vendid, devid, devid2; - const char *name = NULL; - - vendid = adt7475_read_byte(REG_VENDID); - devid2 = adt7475_read_byte(REG_DEVID2); - if (vendid != 0x41 || /* Analog Devices */ - (devid2 & 0xf8) != 0x68) { - return name; - } - - devid = adt7475_read_byte(REG_DEVID); - if (devid == 0x73) - name = "adt7473"; - else if (devid == 0x75 && adt7475_address == 0x2e) - name = "adt7475"; - else if (devid == 0x76) - name = "adt7476"; - else if ((devid2 & 0xfc) == 0x6c) - name = "adt7490"; - - return name; -} - -// thermal control defaults -const struct fan_control cpu_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 3, // default = 45�C - .t_max = 7, // 65�C - .pwm_min = 1, // default dutycycle = 30% - .pwm_max = 13, // 90% -}; -const struct fan_control case_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 2, // default = 40�C - .t_max = 8, // 70�C - .pwm_min = 0, // default dutycycle = 25% - .pwm_max = 13, // 90% -}; - -static void pm_init( void ) -{ - u16 word; - u8 byte; - device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to tristate */ - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* set GPM5 to not wake from s5 */ - byte = pm_ioread(0x77); - byte &= ~(1 << 5); - pm_iowrite(0x77, byte); -} - - /** - * @brief Setup thermal config on SINA Mainboard - * - * @param - */ - -static void set_thermal_config(void) -{ - u8 byte, byte2; - u8 cpu_pwm_conf, case_pwm_conf; - device_t sm_dev; - struct fan_control cpu_fan_control, case_fan_control; - const char *name = NULL; - - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE - - if( (name = adt7475_detect()) == NULL ) { - printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); - return; - } - printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); - - cpu_fan_control = cpu_fan_control_defaults; - case_fan_control = case_fan_control_defaults; - - if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) { - printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__); - } else { - // get all the options needed - if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS ) - cpu_fan_control.enable = byte ? 1 : 0; - - get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); - get_option(&cpu_fan_control.t_min, "cpu_t_min"); - get_option(&cpu_fan_control.t_max, "cpu_t_max"); - get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min"); - get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); - - if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS) - case_fan_control.enable = byte ? 1 : 0; - get_option(&case_fan_control.polarity, "chassis_fan_polarity"); - get_option(&case_fan_control.t_min, "chassis_t_min"); - get_option(&case_fan_control.t_max, "chassis_t_max"); - get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); - get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); - - } - - printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); - cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); - cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); - cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); - cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); - - cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); - printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); - cpu_fan_control.t_range <<= 4; - cpu_fan_control.t_range |= (4 << 0); // 35.3Hz - - printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); - case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); - case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); - case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); - case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); - - case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); - printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); - case_fan_control.t_range <<= 4; - case_fan_control.t_range |= (4 << 0); // 35.3Hz - - cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control - case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp - - /* set adt7475 */ - - adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only - - /* Config Register 6: */ - adt7475_write_byte(REG_CONFIG6, 0x00); - /* Config Register 7 */ - adt7475_write_byte(REG_CONFIG7, 0x00); - - /* Config Register 5: */ - /* set Offset 64 format, enable THERM on Remote 1& Local */ - adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); - /* No offset for remote 1 */ - adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); - /* No offset for local */ - adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); - /* No offset for remote 2 */ - adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); - - /* remote 1 low temp limit */ - adt7475_write_byte(TEMP_MIN_REG(0), 0x00); - /* remote 1 High temp limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(0), 0x9a); - - /* local Low Temp Limit */ - adt7475_write_byte(TEMP_MIN_REG(1), 0x00); - /* local High Limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(1), 0x9a); - - /* remote 1 therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); - /* local therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); - - /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ - adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); - /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ - adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf); - - if( cpu_fan_control.enable ) { - /* PWM 1 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min); - /* PWM 1 Maximum duty cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max); - /* Remote 1 temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min); - /* remote 1 Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range); - } else { - adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); - } - - if( case_fan_control.enable ) { - /* PWM 2 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); - /* PWM 2 Maximum Duty Cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max); - /* local temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min); - /* local Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange - adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq - } else { - adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max); - } - - /* Config Register 3 - enable smbalert & therm */ - adt7475_write_byte(0x78, 0x03); - /* Config Register 4 - enable therm output */ - adt7475_write_byte(0x7d, 0x09); - /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ - adt7475_write_byte(0x75, 0x2e); - - /* Config Register 1 Set Start bit */ - adt7475_write_byte(0x40, 0x05); - - /* Read status register to clear any old errors */ - byte2 = adt7475_read_byte(0x42); - byte = adt7475_read_byte(0x41); - - printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n", - byte2, byte); - -} - - /** - * @brief - * - * @param - */ - -static void patch_mmio_nonposted( void ) -{ - unsigned reg, index; - resource_t rbase, rend; - u32 base, limit; - struct resource *resource; - device_t dev; - device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); - - printk(BIOS_DEBUG,"%s ...\n", __func__); - - dev = dev_find_slot(1, PCI_DEVFN(5,0)); - // the uma frame buffer - index = 0x10; - resource = probe_resource(dev, index); - if( resource ) { - // fixup resource nonposted in k8 mmio - /* Get the base address */ - rbase = (resource->base >> 8) & ~(0xff); - /* Get the limit (rounded up) */ - rend = (resource_end(resource) >> 8) & ~(0xff); - - printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend); - - for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { - base = pci_read_config32(k8_f1,reg); - limit = pci_read_config32(k8_f1,reg+4); - printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); - if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { - limit |= (1 << 7); - printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); - pci_write_config32(k8_f1, reg+4, limit); - break; - } - } - printk(BIOS_DEBUG, "\n"); - } -} - - /** - * @brief - * - * @param - */ - -struct { - unsigned int bus; - unsigned int devfn; -} slot[] = { - {0, PCI_DEVFN(0,0)}, - {0, PCI_DEVFN(18,0)}, - {0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)}, - {0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)}, - {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, - {255,0}, -}; - - -unsigned int plx_present = 0; - -static void update_subsystemid( device_t dev ) -{ - int i; - - dev->subsystem_vendor = 0x110a; - if( plx_present ){ - dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 - } else { - dev->subsystem_device = 0x4077; // U1P0 = 0x4077 - } - printk(BIOS_INFO, "%s [%x/%x]\n", dev_name(dev), dev->subsystem_vendor, dev->subsystem_device ); - for( i=0; slot[i].bus < 255; i++) { - device_t d; - d = dev_find_slot(slot[i].bus,slot[i].devfn); - if( d ) { - printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device); - d->subsystem_device = dev->subsystem_device; - } - } -} - - /** - * @brief - * - * @param - */ - -static void detect_hw_variant( device_t dev ) -{ - - device_t nb_dev =0, dev2 = 0; - struct southbridge_amd_rs690_config *cfg; - u32 lc_state, id = 0; - - printk(BIOS_INFO, "Scan for PLX device ...\n"); - nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (!nb_dev) { - die("CAN NOT FIND RS690 DEVICE, HALT!\n"); - /* NOT REACHED */ - } - - dev2 = dev_find_slot(0, PCI_DEVFN(2, 0)); - if (!dev2) { - die("CAN NOT FIND GFX DEVICE 2, HALT!\n"); - /* NOT REACHED */ - } - PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2 - - mdelay(40); - lc_state = nbpcie_p_read_index(dev2, 0xa5); /* lc_state */ - printk(BIOS_DEBUG, "lc current state=%x\n", lc_state); - /* LC_CURRENT_STATE = bit0-5 */ - switch( lc_state & 0x3f ){ - case 0x00: - case 0x01: - case 0x02: - case 0x03: - case 0x04: - printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n"); - break; - case 0x07: - case 0x10: - { - struct device dummy; - u32 pci_primary_bus, buses; - u16 secondary, subordinate; - - printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); - // save the existing primary/secondary/subordinate bus number configuration. - secondary = dev2->bus->secondary; - subordinate = dev2->bus->subordinate; - buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS); - - // Configure the bus numbers for this bridge - // bus number 1 is for internal gfx device, so we start with busnumber 2 - - buses &= 0xff000000; - buses |= ((2 << 8) | (0xff << 16)); - // setup the buses in device 2 - pci_write_config32(dev2,PCI_PRIMARY_BUS, buses); - - // fake a device descriptor for a device behind device 2 - dummy.bus = dev2->bus; - dummy.bus->secondary = (buses >> 8) & 0xff; - dummy.bus->subordinate = (buses >> 16) & 0xff; - dummy.path.type = DEVICE_PATH_PCI; - dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0 - - id = pci_read_config32(&dummy, PCI_VENDOR_ID); - /* Have we found something? - * Some broken boards return 0 if a slot is empty, but - * the expected answer is 0xffffffff - */ - if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { - printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); - } else { - printk(BIOS_DEBUG, "found device [%x]\n", id); - } - // restore changes made for device 2 - dev2->bus->secondary = secondary; - dev2->bus->secondary = subordinate; - pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus); - } - break; - default: - break; - } - - plx_present = 0; - if( id == PLX_VIDDID ){ - printk(BIOS_INFO, "found PLX device\n"); - plx_present = 1; - cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info; - if( cfg->gfx_tmds ) { - printk(BIOS_INFO, "Disable 'gfx_tmds' support\n"); - cfg->gfx_tmds = 0; - cfg->gfx_link_width = 4; - } - return; - } -} - -static void smm_lock( void ) -{ - /* LOCK the SMM memory window and enable normal SMM. - * After running this function, only a full reset can - * make the SMM registers writable again. - */ - printk(BIOS_DEBUG, "Locking SMM.\n"); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69, - D_LCK | G_SMRAME | A_BASE_SEG); -} - - /** - * @brief Init - * - * @param the root device - */ - -static void mainboard_init(device_t dev) -{ -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE - INT15_function_extensions int15_func; -#endif - - printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); - -#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE - if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS) - int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; - int15_func.regs.func05_TV_standard = TV_MODE_NO; - install_INT15_function_extensions(&int15_func); -#endif - set_thermal_config(); - pm_init(); - cable_detect(); - patch_mmio_nonposted(); - smm_lock(); -} - -/************************************************* -* enable the dedicated function in sina board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - - printk(BIOS_INFO, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); -#if CONFIG_PCI_OPTION_ROM_RUN_YABEL - /* Install custom int15 handler for VGA OPROM */ - mainboard_interrupt_handlers(0x15, &int15_handler); -#endif - - detect_hw_variant(dev); - update_subsystemid(dev); - - dev->ops->init = mainboard_init; // rest of mainboard init later - dev->ops->acpi_inject_dsdt_generator = mainboard_inject_dsdt; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.h b/src/mainboard/siemens/sitemp_g1p1/mainboard.h deleted file mode 100644 index 7f80ca8..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.h +++ /dev/null @@ -1 +0,0 @@ -void mainboard_inject_dsdt(void); diff --git a/src/mainboard/siemens/sitemp_g1p1/mptable.c b/src/mainboard/siemens/sitemp_g1p1/mptable.c deleted file mode 100644 index de5151d..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/mptable.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> - -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - mptable_init(mc, LOCAL_APIC_ADDR); - smp_write_processors(mc); - - get_bus_conf(); - printk(BIOS_DEBUG, "%s: apic_id=0x%x\n", __func__, apicid_sb600); - - mptable_write_buses(mc, NULL, &isa_bus); - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - struct resource *res; - res = find_resource(dev, 0x74); - smp_write_ioapic(mc, apicid_sb600, 0x20, res->base); - } - } - mptable_add_isa_interrupts(mc, isa_bus, apicid_sb600, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) - - /* usb */ - PCI_INT(0x0, 0x13, 0x0, 0x10); - PCI_INT(0x0, 0x13, 0x1, 0x11); - PCI_INT(0x0, 0x13, 0x2, 0x12); - PCI_INT(0x0, 0x13, 0x3, 0x13); - - /* sata */ - PCI_INT(0x0, 0x12, 0x1, 0x16); - - /* SMBus/ACPI */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* IDE */ - PCI_INT(0x0, 0x14, 0x1, 0x11); - /* HDA */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - /* LPC */ - PCI_INT(0x0, 0x14, 0x3, 0x13); - - /* GFX ? */ - PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12); - PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13); - - /* PCIe slots */ - PCI_INT(0x2, 0x00, 0x00, 0x10); - PCI_INT(0x2, 0x00, 0x01, 0x11); - PCI_INT(0x2, 0x00, 0x02, 0x12); - PCI_INT(0x2, 0x00, 0x03, 0x13); - - /* PCIe slots */ - PCI_INT(0x3, 0x00, 0x00, 0x11); - PCI_INT(0x3, 0x00, 0x01, 0x12); - PCI_INT(0x3, 0x00, 0x02, 0x13); - PCI_INT(0x3, 0x00, 0x03, 0x10); - - /* PCIe slots */ - PCI_INT(0x4, 0x00, 0x00, 0x12); - PCI_INT(0x4, 0x00, 0x01, 0x13); - PCI_INT(0x4, 0x00, 0x02, 0x10); - PCI_INT(0x4, 0x00, 0x03, 0x11); - - /* PCIe slots */ - PCI_INT(0x5, 0x00, 0x00, 0x13); - PCI_INT(0x5, 0x00, 0x01, 0x10); - PCI_INT(0x5, 0x00, 0x02, 0x11); - PCI_INT(0x5, 0x00, 0x03, 0x12); - - /* onboard NIC ? */ - PCI_INT(bus_sb600[1], 0x7, 0x0, 0x13); - PCI_INT(bus_sb600[1], 0x7, 0x1, 0x10); - PCI_INT(bus_sb600[1], 0x7, 0x2, 0x11); - PCI_INT(bus_sb600[1], 0x7, 0x3, 0x12); - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c b/src/mainboard/siemens/sitemp_g1p1/resourcemap.c deleted file mode 100644 index d9ce85c..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_sitemp_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c deleted file mode 100644 index 4beb8c9..0000000 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann joseph.kellermann@heitec.de for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> - -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" - -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> - -#include "cpu/x86/bist.h" - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */ - -#define SERIAL_DEV PNP_DEV(0x2e, CONFIG_UART_FOR_CONSOLE == 1 ? IT8712F_SP2 : IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/ -static void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -/* called in raminit_f.c */ -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -/*called in raminit_f.c */ -static inline int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define __WARNING__(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) -#define __DEBUG__(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) -#define __INFO__(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge - sb600_lpc_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - post_code(0x03); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); - - setup_sitemp_resource_map(); - - setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - post_code(0x04); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if( (cpuid1.edx & 0x6) == 0x6 ) { - - /* Read FIDVID_STATUS */ - msr=rdmsr(0xc0010042); - __DEBUG__("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr=rdmsr(0xc0010042); - __DEBUG__("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - } else { - __DEBUG__("Changing FIDVID not supported\n"); - } - - post_code(0x05); - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - __DEBUG__("needs_reset=0x%x\n", needs_reset); - - post_code(0x06); - - if (needs_reset) { - __INFO__("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x07); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_code(0x08); - - rs690_before_pci_init(); // does nothing - sb600_before_pci_init(); - - post_cache_as_ram(); -} diff --git a/src/mainboard/soyo/Kconfig b/src/mainboard/soyo/Kconfig index 4487b81..2caa2ad 100644 --- a/src/mainboard/soyo/Kconfig +++ b/src/mainboard/soyo/Kconfig @@ -26,7 +26,7 @@ config BOARD_SOYO_SY_6BA_PLUS_III
endchoice
-source "src/mainboard/soyo/sy-6ba-plus-iii/Kconfig" +source "src/mainboard/soyo/sy_6ba_plus_iii/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/Kconfig b/src/mainboard/soyo/sy-6ba-plus-iii/Kconfig deleted file mode 100644 index a268bad..0000000 --- a/src/mainboard/soyo/sy-6ba-plus-iii/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_SOYO_SY_6BA_PLUS_III - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SLOT_1 - select NORTHBRIDGE_INTEL_I440BX - select SOUTHBRIDGE_INTEL_I82371EB - select SUPERIO_ITE_IT8671F - select HAVE_PIRQ_TABLE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default soyo/sy-6ba-plus-iii - -config MAINBOARD_PART_NUMBER - string - default "SY-6BA+ III" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_SOYO_SY_6BA_PLUS_III diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/board_info.txt b/src/mainboard/soyo/sy-6ba-plus-iii/board_info.txt deleted file mode 100644 index 25ff698..0000000 --- a/src/mainboard/soyo/sy-6ba-plus-iii/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: desktop -ROM package: DIP32 -ROM protocol: Parallel -ROM socketed: y -Flashrom support: y diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb b/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb deleted file mode 100644 index c7c9ec3..0000000 --- a/src/mainboard/soyo/sy-6ba-plus-iii/devicetree.cb +++ /dev/null @@ -1,73 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/intel/i440bx # Northbridge - device cpu_cluster 0 on # APIC cluster - chip cpu/intel/slot_1 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - device pci 1.0 on end # PCI/AGP bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge - chip superio/ite/it8671f # Super I/O - device pnp 370.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 370.1 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 370.2 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 370.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 370.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 370.6 on # PS/2 mouse - irq 0x70 = 12 - end - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "ide_legacy_enable" = "1" - # Enable UDMA/33 for higher speed if your IDE device(s) support it. - register "ide0_drive0_udma33_enable" = "0" - register "ide0_drive1_udma33_enable" = "0" - register "ide1_drive0_udma33_enable" = "0" - register "ide1_drive1_udma33_enable" = "0" - end - end -end diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c b/src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c deleted file mode 100644 index 55a46b3..0000000 --- a/src/mainboard/soyo/sy-6ba-plus-iii/irq_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x07 << 3) | 0x0, /* Interrupt router dev */ - 0xc00, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x7000, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x9c, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x0f << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, - {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, - {0x00, (0x11 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, - {0x00, (0x12 << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, - {0x00, (0x13 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x5, 0x0}, - {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/soyo/sy-6ba-plus-iii/romstage.c b/src/mainboard/soyo/sy-6ba-plus-iii/romstage.c deleted file mode 100644 index 82ac56f..0000000 --- a/src/mainboard/soyo/sy-6ba-plus-iii/romstage.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82371eb/i82371eb.h" -#include "northbridge/intel/i440bx/raminit.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/bist.h" -#include <superio/ite/it8671f/it8671f.h> -#include <lib.h> - -#define SERIAL_DEV PNP_DEV(0x370, IT8671F_SP1) - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - - enable_smbus(); - dump_spd_registers(); - sdram_set_registers(); - sdram_set_spd_registers(); - sdram_enable(); -} diff --git a/src/mainboard/soyo/sy_6ba_plus_iii/Kconfig b/src/mainboard/soyo/sy_6ba_plus_iii/Kconfig new file mode 100644 index 0000000..4156e17 --- /dev/null +++ b/src/mainboard/soyo/sy_6ba_plus_iii/Kconfig @@ -0,0 +1,43 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +if BOARD_SOYO_SY_6BA_PLUS_III + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SLOT_1 + select NORTHBRIDGE_INTEL_I440BX + select SOUTHBRIDGE_INTEL_I82371EB + select SUPERIO_ITE_IT8671F + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select BOARD_ROMSIZE_KB_256 + +config MAINBOARD_DIR + string + default soyo/sy_6ba_plus_iii + +config MAINBOARD_PART_NUMBER + string + default "SY-6BA+ III" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_SOYO_SY_6BA_PLUS_III diff --git a/src/mainboard/soyo/sy_6ba_plus_iii/board_info.txt b/src/mainboard/soyo/sy_6ba_plus_iii/board_info.txt new file mode 100644 index 0000000..25ff698 --- /dev/null +++ b/src/mainboard/soyo/sy_6ba_plus_iii/board_info.txt @@ -0,0 +1,5 @@ +Category: desktop +ROM package: DIP32 +ROM protocol: Parallel +ROM socketed: y +Flashrom support: y diff --git a/src/mainboard/soyo/sy_6ba_plus_iii/devicetree.cb b/src/mainboard/soyo/sy_6ba_plus_iii/devicetree.cb new file mode 100644 index 0000000..c7c9ec3 --- /dev/null +++ b/src/mainboard/soyo/sy_6ba_plus_iii/devicetree.cb @@ -0,0 +1,73 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/intel/i440bx # Northbridge + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/slot_1 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # PCI/AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/ite/it8671f # Super I/O + device pnp 370.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 370.1 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 370.2 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 370.3 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 370.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 370.6 on # PS/2 mouse + irq 0x70 = 12 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "ide_legacy_enable" = "1" + # Enable UDMA/33 for higher speed if your IDE device(s) support it. + register "ide0_drive0_udma33_enable" = "0" + register "ide0_drive1_udma33_enable" = "0" + register "ide1_drive0_udma33_enable" = "0" + register "ide1_drive1_udma33_enable" = "0" + end + end +end diff --git a/src/mainboard/soyo/sy_6ba_plus_iii/irq_tables.c b/src/mainboard/soyo/sy_6ba_plus_iii/irq_tables.c new file mode 100644 index 0000000..55a46b3 --- /dev/null +++ b/src/mainboard/soyo/sy_6ba_plus_iii/irq_tables.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x07 << 3) | 0x0, /* Interrupt router dev */ + 0xc00, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x7000, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x9c, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x0f << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}}, 0x2, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x62, 0xdeb8}, {0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}}, 0x3, 0x0}, + {0x00, (0x12 << 3) | 0x0, {{0x63, 0xdeb8}, {0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}}, 0x4, 0x0}, + {0x00, (0x13 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x5, 0x0}, + {0x00, (0x07 << 3) | 0x1, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/soyo/sy_6ba_plus_iii/romstage.c b/src/mainboard/soyo/sy_6ba_plus_iii/romstage.c new file mode 100644 index 0000000..82ac56f --- /dev/null +++ b/src/mainboard/soyo/sy_6ba_plus_iii/romstage.c @@ -0,0 +1,55 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "southbridge/intel/i82371eb/i82371eb.h" +#include "northbridge/intel/i440bx/raminit.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/bist.h" +#include <superio/ite/it8671f/it8671f.h> +#include <lib.h> + +#define SERIAL_DEV PNP_DEV(0x370, IT8671F_SP1) + +int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + it8671f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + report_bist_failure(bist); + + enable_smbus(); + dump_spd_registers(); + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); +} diff --git a/src/mainboard/sun/Kconfig b/src/mainboard/sun/Kconfig index 6356717..1ed702e 100644 --- a/src/mainboard/sun/Kconfig +++ b/src/mainboard/sun/Kconfig @@ -3,12 +3,12 @@ if VENDOR_SUN choice prompt "Mainboard model"
-config BOARD_SUN_ULTRA40 +config BOARD_SUN_ULTRA_40 bool "Ultra 40"
endchoice
-source "src/mainboard/sun/ultra40/Kconfig" +source "src/mainboard/sun/ultra_40/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/sun/ultra40/Kconfig b/src/mainboard/sun/ultra40/Kconfig deleted file mode 100644 index 5d390d7..0000000 --- a/src/mainboard/sun/ultra40/Kconfig +++ /dev/null @@ -1,66 +0,0 @@ -if BOARD_SUN_ULTRA40 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_940 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select SUPERIO_SMSC_LPC47M10X - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_1024 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - -config MAINBOARD_DIR - string - default sun/ultra40 - -config DCACHE_RAM_BASE - hex - default 0xcf000 - -config DCACHE_RAM_SIZE - hex - default 0x01000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config CK804_NUM - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "Ultra 40" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUN_ULTRA40 diff --git a/src/mainboard/sun/ultra40/board_info.txt b/src/mainboard/sun/ultra40/board_info.txt deleted file mode 100644 index 76b41dc..0000000 --- a/src/mainboard/sun/ultra40/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: desktop -Board URL: http://docs.oracle.com/cd/E19127-01/ultra40.ws/820-0123-13/intro.html diff --git a/src/mainboard/sun/ultra40/cmos.layout b/src/mainboard/sun/ultra40/cmos.layout deleted file mode 100644 index d8e2eee..0000000 --- a/src/mainboard/sun/ultra40/cmos.layout +++ /dev/null @@ -1,96 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/sun/ultra40/devicetree.cb b/src/mainboard/sun/ultra40/devicetree.cb deleted file mode 100644 index 9f9bb67..0000000 --- a/src/mainboard/sun/ultra40/devicetree.cb +++ /dev/null @@ -1,151 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_940 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x108e 0x0040 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/smsc/lpc47m10x # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 off # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master CK804 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave CK804 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 2 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 19.0 on end # Link 0 - device pci 19.0 on # Link 1 == LDT 1 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 off end # SM - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 off end # IDE - device pci 7.0 off end # SATA 1 - device pci 8.0 off end # SATA 0 - device pci 9.0 off end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - end - end -end diff --git a/src/mainboard/sun/ultra40/get_bus_conf.c b/src/mainboard/sun/ultra40/get_bus_conf.c deleted file mode 100644 index f57719a..0000000 --- a/src/mainboard/sun/ultra40/get_bus_conf.c +++ /dev/null @@ -1,279 +0,0 @@ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif -#include <stdlib.h> -#include <cpu/amd/amdk8_sysconf.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_ck804_0; //1 -unsigned char bus_ck804_1; //2 -unsigned char bus_ck804_2; //3 -unsigned char bus_ck804_3; //4 -unsigned char bus_ck804_4; //5 -unsigned char bus_ck804_5; //6 -unsigned char bus_8131_0; //7 -unsigned char bus_8131_1; //8 -unsigned char bus_8131_2; //9 -unsigned char bus_ck804b_0; //a -unsigned char bus_ck804b_1; //b -unsigned char bus_ck804b_2; //c -unsigned char bus_ck804b_3; //d -unsigned char bus_ck804b_4; //e -unsigned char bus_ck804b_5; //f -unsigned apicid_ck804; -unsigned apicid_8131_1; -unsigned apicid_8131_2; -unsigned apicid_ck804b; - -unsigned sblk; -unsigned pci1234[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdn3; -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - device_t dev; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - hc_possible_num = ARRAY_SIZE(pci1234); - - get_sblk_pci1234(); - - sbdn = (hcdn[0] & 0xff); // first byte of first chain - - sbdn3 = (hcdn[1] & 0xff); - - sbdnb = (hcdn[2] & 0xff); // first byte of second chain - -// bus_ck804_0 = node_link_to_bus(0, sblk); - bus_ck804_0 = (pci1234[0] >> 16) & 0xff; - - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; -#endif - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_5 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b, 0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0b); - - bus_ck804_3 = bus_ck804_2 + 1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c, 0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3 + 1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0d); - - bus_ck804_5 = bus_ck804_4 + 1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x0e); - } - - bus_8131_0 = (pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:01.0, using defaults\n", - bus_8131_0); - - bus_8131_1 = bus_8131_0 + 1; - bus_8131_2 = bus_8131_0 + 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:02.0, using defaults\n", - bus_8131_0); - - bus_8131_2 = bus_8131_1 + 1; - } - - /* CK804b */ - - if (pci1234[2] & 0xf) { //if the second cpu is installed - bus_ck804b_0 = (pci1234[2] >> 16) & 0xff; -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09, 0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x09); - - bus_ck804b_1 = bus_ck804b_0 + 1; - bus_ck804b_2 = bus_ck804b_0 + 2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b, 0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0b); - - bus_ck804b_2 = bus_ck804b_0 + 1; - bus_ck804b_3 = bus_ck804b_0 + 2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c, 0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0c); - - bus_ck804b_4 = bus_ck804b_3 + 1; - } - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d, 0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = - pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0d); - - bus_ck804b_5 = bus_ck804b_4 + 1; - } -#endif - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e, 0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_ck804b_0, sbdnb + 0x0e); -#if 1 - bus_ck804b_5 = bus_ck804b_4 + 1; -#endif - - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(4); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_ck804 = apicid_base + 0; - apicid_8131_1 = apicid_base + 1; - apicid_8131_2 = apicid_base + 2; - apicid_ck804b = apicid_base + 3; - -} diff --git a/src/mainboard/sun/ultra40/irq_tables.c b/src/mainboard/sun/ultra40/irq_tables.c deleted file mode 100644 index a0e21e4..0000000 --- a/src/mainboard/sun/ultra40/irq_tables.c +++ /dev/null @@ -1,181 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0; //7 -extern unsigned char bus_8131_1; //8 -extern unsigned char bus_8131_2; //9 -extern unsigned char bus_ck804b_0;//a -extern unsigned char bus_ck804b_1;//b -extern unsigned char bus_ck804b_2;//c -extern unsigned char bus_ck804b_3;//d -extern unsigned char bus_ck804b_4;//e -extern unsigned char bus_ck804b_5;//f - -extern unsigned pci1234[]; - -extern unsigned sbdn; -extern unsigned hcdn[]; -extern unsigned sbdn3; -extern unsigned sbdnb; - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804_0; - pirq->rtr_devfn = ((sbdn+9)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; -//pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - if(pci1234[2] & 0xf) { - //second pci beidge - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); - pirq_info++; slot_num++; - } -#if 0 -//smbus - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - -//Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; slot_num++; - -//firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - -//Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -//Slot3 PCIE x16 - write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); - pirq_info++; slot_num++; - -//Slot4 PCIX - write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); - pirq_info++; slot_num++; - -//Slot5 PCIX - write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); - pirq_info++; slot_num++; - -//onboard scsi - write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - -//Slot6 PCIX - write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); - pirq_info++; slot_num++; -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/sun/ultra40/mptable.c b/src/mainboard/sun/ultra40/mptable.c deleted file mode 100644 index 1ba1dcf..0000000 --- a/src/mainboard/sun/ultra40/mptable.c +++ /dev/null @@ -1,197 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804_0; //1 -extern unsigned char bus_ck804_1; //2 -extern unsigned char bus_ck804_2; //3 -extern unsigned char bus_ck804_3; //4 -extern unsigned char bus_ck804_4; //5 -extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0; //7 -extern unsigned char bus_8131_1; //8 -extern unsigned char bus_8131_2; //9 -extern unsigned char bus_ck804b_0;//a -extern unsigned char bus_ck804b_1;//b -extern unsigned char bus_ck804b_2;//c -extern unsigned char bus_ck804b_3;//d -extern unsigned char bus_ck804b_4;//e -extern unsigned char bus_ck804b_5;//f -extern unsigned apicid_ck804; -extern unsigned apicid_8131_1; -extern unsigned apicid_8131_2; -extern unsigned apicid_ck804b; - -extern unsigned pci1234[]; - -extern unsigned sbdn; -extern unsigned hcdn[]; -extern unsigned sbdn3; -extern unsigned sbdnb; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int i, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); - } - - /* Initialize interrupt mapping*/ - - dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00080d7d; - pci_write_config32(dev, 0x84, dword); - - } - - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); - } - } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); - } - } - - if(pci1234[2] & 0xf) { - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base); - } - - dword = 0x0000d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x00000000; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00000d00; - pci_write_config32(dev, 0x84, dword); - - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 1); - -// Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); -// 10 - -// Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 - -// Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 - -// Onboard ck804 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 - -// Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 - -// Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 - -// Onboard ck804 NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 - -//Slot 1 PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); - } - -//Onboard Firewire - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 - -//Slot 2 PCI 32 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); - } - - if(pci1234[2] & 0xf) { -//Onboard ck804b NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 - -//Slot 3 PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); - } - } - -//Channel B of 8131 - -//Slot 4 PCI-X 100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); - } - -//Slot 5 PCIX 100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 - } - -//OnBoard LSI SCSI - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 - } - -//Channel A of 8131 - -//Slot 6 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/sun/ultra40/resourcemap.c b/src/mainboard/sun/ultra40/resourcemap.c deleted file mode 100644 index 964be50..0000000 --- a/src/mainboard/sun/ultra40/resourcemap.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * needs a different resource map - * - */ - -static void setup_ultra40_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000, 0x7f000103, - PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000, 0xff800113, - PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xec), 0x0000, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/sun/ultra40/romstage.c b/src/mainboard/sun/ultra40/romstage.c deleted file mode 100644 index 7c112da..0000000 --- a/src/mainboard/sun/ultra40/romstage.c +++ /dev/null @@ -1,152 +0,0 @@ -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "southbridge/nvidia/ck804/early_smbus.h" -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include "superio/smsc/lpc47b397/early_serial.c" -#include "cpu/x86/bist.h" -#include "superio/smsc/lpc47b397/early_gpio.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) -#define SUPERIO_GPIO_IO_BASE 0x400 - -static void memreset(int controllers, const struct mem_controller *ctrl) { } - -#ifdef ENABLE_ONBOARD_SCSI -static void sio_gpio_setup(void) -{ - unsigned value; - - /*Enable onboard scsi*/ - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); -} -#endif - -static inline void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "southbridge/nvidia/ck804/early_setup_ss.h" - -//set GPIO to input mode -#define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ - -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - unsigned value; - uint32_t dword; - uint8_t byte; - - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<29)|(1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ultra40_resource_map(); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(nodes, ctrl); - - post_cache_as_ram(); -} diff --git a/src/mainboard/sun/ultra_40/Kconfig b/src/mainboard/sun/ultra_40/Kconfig new file mode 100644 index 0000000..a1a3617 --- /dev/null +++ b/src/mainboard/sun/ultra_40/Kconfig @@ -0,0 +1,66 @@ +if BOARD_SUN_ULTRA_40 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_940 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_CK804 + select SUPERIO_SMSC_LPC47M10X + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_1024 + select CK804_USE_NIC + select CK804_USE_ACI + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + +config MAINBOARD_DIR + string + default sun/ultra_40 + +config DCACHE_RAM_BASE + hex + default 0xcf000 + +config DCACHE_RAM_SIZE + hex + default 0x01000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config CK804_NUM + int + default 2 + +config MAINBOARD_PART_NUMBER + string + default "Ultra 40" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_SUN_ULTRA_40 diff --git a/src/mainboard/sun/ultra_40/board_info.txt b/src/mainboard/sun/ultra_40/board_info.txt new file mode 100644 index 0000000..76b41dc --- /dev/null +++ b/src/mainboard/sun/ultra_40/board_info.txt @@ -0,0 +1,2 @@ +Category: desktop +Board URL: http://docs.oracle.com/cd/E19127-01/ultra40.ws/820-0123-13/intro.html diff --git a/src/mainboard/sun/ultra_40/cmos.layout b/src/mainboard/sun/ultra_40/cmos.layout new file mode 100644 index 0000000..d8e2eee --- /dev/null +++ b/src/mainboard/sun/ultra_40/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/sun/ultra_40/devicetree.cb b/src/mainboard/sun/ultra_40/devicetree.cb new file mode 100644 index 0000000..9f9bb67 --- /dev/null +++ b/src/mainboard/sun/ultra_40/devicetree.cb @@ -0,0 +1,151 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_940 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x108e 0x0040 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/smsc/lpc47m10x # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 off # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master CK804 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave CK804 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 19.0 on end # Link 0 + device pci 19.0 on # Link 1 == LDT 1 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end +end diff --git a/src/mainboard/sun/ultra_40/get_bus_conf.c b/src/mainboard/sun/ultra_40/get_bus_conf.c new file mode 100644 index 0000000..f57719a --- /dev/null +++ b/src/mainboard/sun/ultra_40/get_bus_conf.c @@ -0,0 +1,279 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif +#include <stdlib.h> +#include <cpu/amd/amdk8_sysconf.h> + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned char bus_ck804b_0; //a +unsigned char bus_ck804b_1; //b +unsigned char bus_ck804b_2; //c +unsigned char bus_ck804b_3; //d +unsigned char bus_ck804b_4; //e +unsigned char bus_ck804b_5; //f +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; +unsigned apicid_ck804b; + +unsigned sblk; +unsigned pci1234[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdn3; +unsigned sbdnb; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = ARRAY_SIZE(pci1234); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] & 0xff); // first byte of first chain + + sbdn3 = (hcdn[1] & 0xff); + + sbdnb = (hcdn[2] & 0xff); // first byte of second chain + +// bus_ck804_0 = node_link_to_bus(0, sblk); + bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; +#endif + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_5 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b, 0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0b); + + bus_ck804_3 = bus_ck804_2 + 1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c, 0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3 + 1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4 + 1; + } +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } + + bus_8131_0 = (pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + + bus_8131_2 = bus_8131_1 + 1; + } + + /* CK804b */ + + if (pci1234[2] & 0xf) { //if the second cpu is installed + bus_ck804b_0 = (pci1234[2] >> 16) & 0xff; +#if 0 + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09, 0)); + if (dev) { + bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_2 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x09); + + bus_ck804b_1 = bus_ck804b_0 + 1; + bus_ck804b_2 = bus_ck804b_0 + 2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b, 0)); + if (dev) { + bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_3 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_3++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0b); + + bus_ck804b_2 = bus_ck804b_0 + 1; + bus_ck804b_3 = bus_ck804b_0 + 2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c, 0)); + if (dev) { + bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_4 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0c); + + bus_ck804b_4 = bus_ck804b_3 + 1; + } + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d, 0)); + if (dev) { + bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_5 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0d); + + bus_ck804b_5 = bus_ck804b_4 + 1; + } +#endif + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e, 0)); + if (dev) { + bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0e); +#if 1 + bus_ck804b_5 = bus_ck804b_4 + 1; +#endif + + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(4); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; + apicid_ck804b = apicid_base + 3; + +} diff --git a/src/mainboard/sun/ultra_40/irq_tables.c b/src/mainboard/sun/ultra_40/irq_tables.c new file mode 100644 index 0000000..a0e21e4 --- /dev/null +++ b/src/mainboard/sun/ultra_40/irq_tables.c @@ -0,0 +1,181 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804_0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + if(pci1234[2] & 0xf) { + //second pci beidge + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); + pirq_info++; slot_num++; + } +#if 0 +//smbus + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot1 PCIE x16 + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; + +//firewire + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot2 pci + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; + +//Slot4 PCIX + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; + +//Slot5 PCIX + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; + +//onboard scsi + write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot6 PCIX + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/sun/ultra_40/mptable.c b/src/mainboard/sun/ultra_40/mptable.c new file mode 100644 index 0000000..1ba1dcf --- /dev/null +++ b/src/mainboard/sun/ultra_40/mptable.c @@ -0,0 +1,197 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; +extern unsigned apicid_ck804b; + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int i, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); + } + + /* Initialize interrupt mapping*/ + + dword = 0x0120d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00080d7d; + pci_write_config32(dev, 0x84, dword); + + } + + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); + } + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); + } + } + + if(pci1234[2] & 0xf) { + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base); + } + + dword = 0x0000d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x00000000; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00000d00; + pci_write_config32(dev, 0x84, dword); + + } + } + + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 1); + +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); +// 10 + +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + +// Onboard ck804 Audio + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 + +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + +// Onboard ck804 NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 + +//Slot 1 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } + +//Onboard Firewire + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 + +//Slot 2 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); + } + + if(pci1234[2] & 0xf) { +//Onboard ck804b NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 + +//Slot 3 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); + } + } + +//Channel B of 8131 + +//Slot 4 PCI-X 100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); + } + +//Slot 5 PCIX 100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 + } + +//OnBoard LSI SCSI + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 + } + +//Channel A of 8131 + +//Slot 6 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/sun/ultra_40/resourcemap.c b/src/mainboard/sun/ultra_40/resourcemap.c new file mode 100644 index 0000000..964be50 --- /dev/null +++ b/src/mainboard/sun/ultra_40/resourcemap.c @@ -0,0 +1,265 @@ +/* + * needs a different resource map + * + */ + +static void setup_ultra40_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000, 0x7f000103, + PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000, 0xff800113, + PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xec), 0x0000, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/sun/ultra_40/romstage.c b/src/mainboard/sun/ultra_40/romstage.c new file mode 100644 index 0000000..7c112da --- /dev/null +++ b/src/mainboard/sun/ultra_40/romstage.c @@ -0,0 +1,152 @@ +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/early_smbus.h" +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/smsc/lpc47b397/early_serial.c" +#include "cpu/x86/bist.h" +#include "superio/smsc/lpc47b397/early_gpio.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void memreset(int controllers, const struct mem_controller *ctrl) { } + +#ifdef ENABLE_ONBOARD_SCSI +static void sio_gpio_setup(void) +{ + unsigned value; + + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); +} +#endif + +static inline void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/ck804/early_setup_ss.h" + +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + +#include "southbridge/nvidia/ck804/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + unsigned value; + uint32_t dword; + uint8_t byte; + + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + int needs_reset; + unsigned bsp_apicid = 0, nodes; + struct mem_controller ctrl[8]; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx); + + lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_ultra40_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + needs_reset |= ht_setup_chains_x(); + needs_reset |= ck804_early_setup_x(); + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); + + sdram_initialize(nodes, ctrl); + + post_cache_as_ram(); +} diff --git a/src/mainboard/supermicro/Kconfig b/src/mainboard/supermicro/Kconfig index ef4d3bc..1cf8d66 100644 --- a/src/mainboard/supermicro/Kconfig +++ b/src/mainboard/supermicro/Kconfig @@ -3,13 +3,13 @@ if VENDOR_SUPERMICRO choice prompt "Mainboard model"
-config BOARD_SUPERMICRO_H8DME +config BOARD_SUPERMICRO_H8DME_2 bool "H8DME-2" -config BOARD_SUPERMICRO_H8DMR +config BOARD_SUPERMICRO_H8DMR_I2 bool "H8DMR-i2" -config BOARD_SUPERMICRO_H8DMR_FAM10 +config BOARD_SUPERMICRO_H8DMR_I2_FAM10 bool "H8DMR-i2 (Fam10)" -config BOARD_SUPERMICRO_H8QME_FAM10 +config BOARD_SUPERMICRO_H8QME_2_PLUS_FAM10 bool "H8QME-2+ (Fam10)" config BOARD_SUPERMICRO_H8SCM_FAM10 bool "H8SCM (Fam10)" @@ -27,15 +27,15 @@ config BOARD_SUPERMICRO_X6DHR_IG2 bool "X6DHR-iG2" config BOARD_SUPERMICRO_X6DHR_IG bool "X6DHR-iG" -config BOARD_SUPERMICRO_X7DB8 +config BOARD_SUPERMICRO_X7DB8___X7DB8_PLUS bool "X7DB8 / X7DB8+"
endchoice
-source "src/mainboard/supermicro/h8dme/Kconfig" -source "src/mainboard/supermicro/h8dmr/Kconfig" -source "src/mainboard/supermicro/h8dmr_fam10/Kconfig" -source "src/mainboard/supermicro/h8qme_fam10/Kconfig" +source "src/mainboard/supermicro/h8dme_2/Kconfig" +source "src/mainboard/supermicro/h8dmr_i2/Kconfig" +source "src/mainboard/supermicro/h8dmr_i2_fam10/Kconfig" +source "src/mainboard/supermicro/h8qme_2_plus_fam10/Kconfig" source "src/mainboard/supermicro/h8scm_fam10/Kconfig" source "src/mainboard/supermicro/h8scm/Kconfig" source "src/mainboard/supermicro/h8qgi/Kconfig" @@ -44,7 +44,7 @@ source "src/mainboard/supermicro/x6dhe_g2/Kconfig" source "src/mainboard/supermicro/x6dhe_g/Kconfig" source "src/mainboard/supermicro/x6dhr_ig2/Kconfig" source "src/mainboard/supermicro/x6dhr_ig/Kconfig" -source "src/mainboard/supermicro/x7db8/Kconfig" +source "src/mainboard/supermicro/x7db8___x7db8_plus/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig deleted file mode 100644 index 52d5581..0000000 --- a/src/mainboard/supermicro/h8dme/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if BOARD_SUPERMICRO_H8DME - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default supermicro/h8dme - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "H8DME-2" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUPERMICRO_H8DME diff --git a/src/mainboard/supermicro/h8dme/board_info.txt b/src/mainboard/supermicro/h8dme/board_info.txt deleted file mode 100644 index bd2a32b..0000000 --- a/src/mainboard/supermicro/h8dme/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm diff --git a/src/mainboard/supermicro/h8dme/cmos.layout b/src/mainboard/supermicro/h8dme/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/supermicro/h8dme/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dme/devicetree.cb b/src/mainboard/supermicro/h8dme/devicetree.cb deleted file mode 100644 index 754e316..0000000 --- a/src/mainboard/supermicro/h8dme/devicetree.cb +++ /dev/null @@ -1,126 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 - device i2c 48 off end - device i2c 49 off end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dme/get_bus_conf.c b/src/mainboard/supermicro/h8dme/get_bus_conf.c deleted file mode 100644 index 0279f8f..0000000 --- a/src/mainboard/supermicro/h8dme/get_bus_conf.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned char bus_pcix[3]; // under bus_mcp55_2 - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - for (i = 0; i < 3; i++) { - bus_pcix[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_mcp55[0], sbdn + 0x0a + i - 2); - } - } - - if (bus_mcp55[2]) { - for (i = 0; i < 2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if (dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i + 1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/supermicro/h8dme/irq_tables.c b/src/mainboard/supermicro/h8dme/irq_tables.c deleted file mode 100644 index 31a9377..0000000 --- a/src/mainboard/supermicro/h8dme/irq_tables.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern unsigned char bus_isa; -extern unsigned char bus_mcp55[8]; //1 - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dme/mptable.c b/src/mainboard/supermicro/h8dme/mptable.c deleted file mode 100644 index 17067ed..0000000 --- a/src/mainboard/supermicro/h8dme/mptable.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -extern unsigned char bus_pcix[3]; // under bus_mcp55_2 - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 - - for(j=7; j>=2; j--) { - if(!bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00<<2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04<<2)|i, apicid_mcp55, 0x10 + (0+i)%4); - } - - - if(bus_pcix[0]) { - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4<<2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 - } - - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4<<2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dme/resourcemap.c b/src/mainboard/supermicro/h8dme/resourcemap.c deleted file mode 100644 index 3d12cda..0000000 --- a/src/mainboard/supermicro/h8dme/resourcemap.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c deleted file mode 100644 index e3e7386..0000000 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#if 0 -/* We don't do any switching yet. */ -#define SMBUS_SWITCH1 0x48 -#define SMBUS_SWITCH2 0x49 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); -#endif -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); -// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -/* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ -#define RC0 (2<<8) -#define RC1 (1<<8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -/* The SPD is being read from the CPU1 (marked CPU2 on the board) and we - don't know how to switch the SMBus to decode the CPU0 SPDs. So, The - memory on each CPU must be an exact match. - */ - static const uint16_t spd_addr[] = { - // Node 0 - RC0 | DIMM0, RC0 | DIMM2, - RC0 | DIMM4, RC0 | DIMM6, - RC0 | DIMM1, RC0 | DIMM3, - RC0 | DIMM5, RC0 | DIMM7, - // Node 1 - RC1 | DIMM0, RC1 | DIMM2, - RC1 | DIMM4, RC1 | DIMM6, - RC1 | DIMM1, RC1 | DIMM3, - RC1 | DIMM5, RC1 | DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - w83627hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - print_debug("bsp_apicid="); - print_debug_hex8(bsp_apicid); - print_debug("\n"); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram -#if CONFIG_DEBUG_SMBUS - dump_smbus_registers(); -#endif - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr = rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\n"); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - print_debug("end msr fid, vid "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\n"); - } -#endif - - init_timer(); /* Need to use TMICT to synconize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); /* enable in sio_setup */ - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now -} diff --git a/src/mainboard/supermicro/h8dme_2/Kconfig b/src/mainboard/supermicro/h8dme_2/Kconfig new file mode 100644 index 0000000..f93d914 --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/Kconfig @@ -0,0 +1,71 @@ +if BOARD_SUPERMICRO_H8DME_2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_1024 + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + select SET_FIDVID + select DRIVERS_I2C_I2CMUX2 + +config MAINBOARD_DIR + string + default supermicro/h8dme_2 + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "H8DME-2" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_SUPERMICRO_H8DME_2 diff --git a/src/mainboard/supermicro/h8dme_2/board_info.txt b/src/mainboard/supermicro/h8dme_2/board_info.txt new file mode 100644 index 0000000..bd2a32b --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm diff --git a/src/mainboard/supermicro/h8dme_2/cmos.layout b/src/mainboard/supermicro/h8dme_2/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dme_2/devicetree.cb b/src/mainboard/supermicro/h8dme_2/devicetree.cb new file mode 100644 index 0000000..754e316 --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/devicetree.cb @@ -0,0 +1,126 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 + device i2c 48 off end + device i2c 49 off end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/supermicro/h8dme_2/get_bus_conf.c b/src/mainboard/supermicro/h8dme_2/get_bus_conf.c new file mode 100644 index 0000000..0279f8f --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/get_bus_conf.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; + +unsigned char bus_pcix[3]; // under bus_mcp55_2 + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdnb; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + unsigned sbdn; + + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain + + for (i = 0; i < 8; i++) { + bus_mcp55[i] = 0; + } + + for (i = 0; i < 3; i++) { + bus_pcix[i] = 0; + } + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); + + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_mcp55[0], sbdn + 0x0a + i - 2); + } + } + + if (bus_mcp55[2]) { + for (i = 0; i < 2; i++) { + dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); + if (dev) { + bus_pcix[0] = bus_mcp55[2]; + bus_pcix[i + 1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; + +} diff --git a/src/mainboard/supermicro/h8dme_2/irq_tables.c b/src/mainboard/supermicro/h8dme_2/irq_tables.c new file mode 100644 index 0000000..31a9377 --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/irq_tables.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern unsigned char bus_isa; +extern unsigned char bus_mcp55[8]; //1 + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/supermicro/h8dme_2/mptable.c b/src/mainboard/supermicro/h8dme_2/mptable.c new file mode 100644 index 0000000..17067ed --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/mptable.c @@ -0,0 +1,132 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_mcp55[8]; //1 + +extern unsigned apicid_mcp55; + +extern unsigned char bus_pcix[3]; // under bus_mcp55_2 + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned sbdn; + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + + + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00<<2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04<<2)|i, apicid_mcp55, 0x10 + (0+i)%4); + } + + + if(bus_pcix[0]) { + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4<<2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 + } + + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4<<2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 + } + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/supermicro/h8dme_2/resourcemap.c b/src/mainboard/supermicro/h8dme_2/resourcemap.c new file mode 100644 index 0000000..3d12cda --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/resourcemap.c @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/supermicro/h8dme_2/romstage.c b/src/mainboard/supermicro/h8dme_2/romstage.c new file mode 100644 index 0000000..e3e7386 --- /dev/null +++ b/src/mainboard/supermicro/h8dme_2/romstage.c @@ -0,0 +1,220 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#if 0 +/* We don't do any switching yet. */ +#define SMBUS_SWITCH1 0x48 +#define SMBUS_SWITCH2 0x49 + unsigned device=(ctrl->channel0[0])>>8; + smbus_send_byte(SMBUS_SWITCH1, device); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); +#endif +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + enable_smbus(); +// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); + dword |= (1 << 0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); + dword |= (1 << 16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); +} + +/* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ +#define RC0 (2<<8) +#define RC1 (1<<8) + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +/* The SPD is being read from the CPU1 (marked CPU2 on the board) and we + don't know how to switch the SMBus to decode the CPU0 SPDs. So, The + memory on each CPU must be an exact match. + */ + static const uint16_t spd_addr[] = { + // Node 0 + RC0 | DIMM0, RC0 | DIMM2, + RC0 | DIMM4, RC0 | DIMM6, + RC0 | DIMM1, RC0 | DIMM3, + RC0 | DIMM5, RC0 | DIMM7, + // Node 1 + RC1 | DIMM0, RC1 | DIMM2, + RC1 | DIMM4, RC1 | DIMM6, + RC1 | DIMM1, RC1 | DIMM3, + RC1 | DIMM5, RC1 | DIMM7, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + w83627hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + setup_mb_resource_map(); + + print_debug("bsp_apicid="); + print_debug_hex8(bsp_apicid); + print_debug("\n"); + + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram +#if CONFIG_DEBUG_SMBUS + dump_smbus_registers(); +#endif + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr = rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\n"); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr = rdmsr(0xc0010042); + print_debug("end msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\n"); + } +#endif + + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); /* enable in sio_setup */ + + /* all ap stopped? */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now +} diff --git a/src/mainboard/supermicro/h8dmr/Kconfig b/src/mainboard/supermicro/h8dmr/Kconfig deleted file mode 100644 index f85460b..0000000 --- a/src/mainboard/supermicro/h8dmr/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -if BOARD_SUPERMICRO_H8DMR - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default supermicro/h8dmr - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 1 - -config MAINBOARD_PART_NUMBER - string - default "H8DMR-i2" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUPERMICRO_H8DMR diff --git a/src/mainboard/supermicro/h8dmr/board_info.txt b/src/mainboard/supermicro/h8dmr/board_info.txt deleted file mode 100644 index b4f8f0b..0000000 --- a/src/mainboard/supermicro/h8dmr/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DMR-i2.cfm diff --git a/src/mainboard/supermicro/h8dmr/cmos.layout b/src/mainboard/supermicro/h8dmr/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/supermicro/h8dmr/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr/devicetree.cb b/src/mainboard/supermicro/h8dmr/devicetree.cb deleted file mode 100644 index b363674..0000000 --- a/src/mainboard/supermicro/h8dmr/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dmr/get_bus_conf.c b/src/mainboard/supermicro/h8dmr/get_bus_conf.c deleted file mode 100644 index 0279f8f..0000000 --- a/src/mainboard/supermicro/h8dmr/get_bus_conf.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_mcp55[8]; //1 -unsigned apicid_mcp55; - -unsigned char bus_pcix[3]; // under bus_mcp55_2 - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -unsigned sbdnb; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - unsigned sbdn; - - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - for (i = 0; i < 8; i++) { - bus_mcp55[i] = 0; - } - - for (i = 0; i < 3; i++) { - bus_pcix[i] = 0; - } - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - bus_mcp55[0], sbdn + 0x0a + i - 2); - } - } - - if (bus_mcp55[2]) { - for (i = 0; i < 2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if (dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i + 1] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/supermicro/h8dmr/irq_tables.c b/src/mainboard/supermicro/h8dmr/irq_tables.c deleted file mode 100644 index 31a9377..0000000 --- a/src/mainboard/supermicro/h8dmr/irq_tables.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern unsigned char bus_isa; -extern unsigned char bus_mcp55[8]; //1 - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dmr/mptable.c b/src/mainboard/supermicro/h8dmr/mptable.c deleted file mode 100644 index 11db23f..0000000 --- a/src/mainboard/supermicro/h8dmr/mptable.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; //1 - -extern unsigned apicid_mcp55; - -extern unsigned char bus_pcix[3]; // under bus_mcp55_2 - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 - - for(j=7; j>=2; j--) { - if(!bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00<<2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04<<2)|i, apicid_mcp55, 0x10 + (0+i)%4); - } - - - if(bus_pcix[0]) { - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4<<2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 - } - - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4<<2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 - } - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dmr/resourcemap.c b/src/mainboard/supermicro/h8dmr/resourcemap.c deleted file mode 100644 index 3d12cda..0000000 --- a/src/mainboard/supermicro/h8dmr/resourcemap.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c deleted file mode 100644 index 7d1f834..0000000 --- a/src/mainboard/supermicro/h8dmr/romstage.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/f.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); -// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr [] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - w83627hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_mb_resource_map(); - - print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); - - set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram - setup_coherent_ht_domain(); // routing table and start other core0 - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - -#if CONFIG_SET_FIDVID - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); // Need to use TMICT to synconize FID/VID - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - -// enable_smbus(); /* enable in sio_setup */ - - /* all ap stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig deleted file mode 100644 index 02c4691..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ /dev/null @@ -1,83 +0,0 @@ -if BOARD_SUPERMICRO_H8DMR_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F_1207 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_NVIDIA_MCP55 - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select AMDMCT - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default supermicro/h8dmr_fam10 - -config DCACHE_RAM_BASE - hex - default 0xc4000 - -config DCACHE_RAM_SIZE - hex - default 0x0c000 - -config RAMBASE - hex - default 0x200000 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xc0000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "H8DMR-i2 (Fam10)" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_0100009f.h" - -endif # BOARD_SUPERMICRO_H8DMR_FAM10 diff --git a/src/mainboard/supermicro/h8dmr_fam10/README b/src/mainboard/supermicro/h8dmr_fam10/README deleted file mode 100644 index 485e7c8..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/README +++ /dev/null @@ -1,23 +0,0 @@ - - -There are a number of outstanding issues: - -* I'm seeing toolchain issues. I can't get this tree to compile correctly with -gcc 4.3 (32 bit) - there is an optimization issue where certain parts of the -CBFS code execute very slowly. With gcc 3.4 (32 bit) that slowness -disappears. This is probably not a problem related to this port specifically. - -* setting CONFIG_DEFAULT_CONSOLE_LOGLEVEL lower than 8 simply hangs the boot -shortly after the warm reset triggered by the MCP55 code. I think this too -might be a toolchain problem (but I see it on gcc 3.4 as well as 4.3). - -* during startup, the CPU cores talk through each other on serial for a -while. Again, not an issue specific to this port. - -* to avoid very slow LZMA decompression I use this port with LZMA compression -disabled in CBFS. I'm not sure what's causing this particular slowness. - -See also this thread: http://www.coreboot.org/pipermail/coreboot/2009-September/052107.html - -Ward, 2009-09-22 - diff --git a/src/mainboard/supermicro/h8dmr_fam10/board_info.txt b/src/mainboard/supermicro/h8dmr_fam10/board_info.txt deleted file mode 100644 index 3d902b6..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: server diff --git a/src/mainboard/supermicro/h8dmr_fam10/cmos.layout b/src/mainboard/supermicro/h8dmr_fam10/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb b/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb deleted file mode 100644 index 9e52d07..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb +++ /dev/null @@ -1,152 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2.0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c deleted file mode 100644 index a1de06c..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -/* Here you only need to set value in pci1234 for HT-IO that could be -installed or not You may need to preset pci1234 for HTIO board, please -refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ -static u32 pci1234x[] = { - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, - }; - - -/* HT Chain device num, actually it is unit id base of every ht device -in chain, assume every chain only have 4 ht device at most */ - -static unsigned hcdnx[] = { - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, -}; - -extern void get_pci1234(void); - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - struct mb_sysconf_t *m; - - device_t dev; - int i; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } - - for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } - } - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - m->apicid_mcp55 = apicid_base+0; - -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c b/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c deleted file mode 100644 index 54a4e54..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } - -#if CONFIG_CBB - write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - if(sysconf.nodes>32) { - write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h b/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h deleted file mode 100644 index ad78ef6..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/supermicro/h8dmr_fam10/mptable.c b/src/mainboard/supermicro/h8dmr_fam10/mptable.c deleted file mode 100644 index 4e2d48c..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/mptable.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for(j=7; j>=2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c b/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c deleted file mode 100644 index eef1811..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - // WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - // WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c deleted file mode 100644 index b393c34..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 1 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdfam10/debug.c" -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); - // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ - /* set FAN ctrl to DC mode */ - smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -static const u8 spd_addr[] = { - //first node - RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, -#endif -}; - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - u32 bsp_apicid = 0, val, wants_reset; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sio_setup(); - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - post_code(0x32); - - w83627hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo + 1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", - msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", - msr.hi, msr.lo); -#endif - - init_timer(); // Need to use TMICT to synconize FID/VID - - wants_reset = mcp55_early_setup_x(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wants additional reset!\n"); - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x3D); - - // printk(BIOS_DEBUG, "enable_smbus()\n"); - // enable_smbus(); /* enable in sio_setup */ - - post_code(0x40); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - - post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2 - post_code(0x42); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/supermicro/h8dmr_i2/Kconfig b/src/mainboard/supermicro/h8dmr_i2/Kconfig new file mode 100644 index 0000000..cd2431c --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/Kconfig @@ -0,0 +1,70 @@ +if BOARD_SUPERMICRO_H8DMR_I2 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select BOARD_ROMSIZE_KB_1024 + select QRANK_DIMM_SUPPORT + select K8_ALLOCATE_IO_RANGE + select SET_FIDVID + +config MAINBOARD_DIR + string + default supermicro/h8dmr_i2 + +config DCACHE_RAM_BASE + hex + default 0xc8000 + +config DCACHE_RAM_SIZE + hex + default 0x08000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config MEM_TRAIN_SEQ + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "H8DMR-i2" + +config MAX_CPUS + int + default 4 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_SUPERMICRO_H8DMR_I2 diff --git a/src/mainboard/supermicro/h8dmr_i2/board_info.txt b/src/mainboard/supermicro/h8dmr_i2/board_info.txt new file mode 100644 index 0000000..b4f8f0b --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DMR-i2.cfm diff --git a/src/mainboard/supermicro/h8dmr_i2/cmos.layout b/src/mainboard/supermicro/h8dmr_i2/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr_i2/devicetree.cb b/src/mainboard/supermicro/h8dmr_i2/devicetree.cb new file mode 100644 index 0000000..b363674 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/devicetree.cb @@ -0,0 +1,146 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/supermicro/h8dmr_i2/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_i2/get_bus_conf.c new file mode 100644 index 0000000..0279f8f --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/get_bus_conf.c @@ -0,0 +1,152 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> +#include <stdlib.h> + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; + +unsigned char bus_pcix[3]; // under bus_mcp55_2 + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdnb; + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + unsigned sbdn; + + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + sbdnb = (sysconf.hcdn[1] & 0xff); // first byte of second chain + + for (i = 0; i < 8; i++) { + bus_mcp55[i] = 0; + } + + for (i = 0; i < 3; i++) { + bus_pcix[i] = 0; + } + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); + + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_mcp55[0], sbdn + 0x0a + i - 2); + } + } + + if (bus_mcp55[2]) { + for (i = 0; i < 2; i++) { + dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); + if (dev) { + bus_pcix[0] = bus_mcp55[2]; + bus_pcix[i + 1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; + +} diff --git a/src/mainboard/supermicro/h8dmr_i2/irq_tables.c b/src/mainboard/supermicro/h8dmr_i2/irq_tables.c new file mode 100644 index 0000000..31a9377 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/irq_tables.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern unsigned char bus_isa; +extern unsigned char bus_mcp55[8]; //1 + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/supermicro/h8dmr_i2/mptable.c b/src/mainboard/supermicro/h8dmr_i2/mptable.c new file mode 100644 index 0000000..11db23f --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/mptable.c @@ -0,0 +1,133 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_mcp55[8]; //1 + +extern unsigned apicid_mcp55; + +extern unsigned char bus_pcix[3]; // under bus_mcp55_2 + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + unsigned sbdn; + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + + + } + + mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+1)<<2)|1, apicid_mcp55, 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|0, apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+2)<<2)|1, apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+6)<<2)|1, apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|0, apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+5)<<2)|2, apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+8)<<2)|0, apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn+9)<<2)|0, apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00<<2)|i, apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_mcp55[1], (0x04<<2)|i, apicid_mcp55, 0x10 + (0+i)%4); + } + + + if(bus_pcix[0]) { + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[2], (4<<2)|i, apicid_mcp55, 0x10 + (0+i+4-sbdn%4)%4); //16, 17 + } + + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_pcix[1], (4<<2)|i, apicid_mcp55, 0x10 + (2+i+4-sbdn%4)%4); // 18, 19, 16, 17 + } + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/supermicro/h8dmr_i2/resourcemap.c b/src/mainboard/supermicro/h8dmr_i2/resourcemap.c new file mode 100644 index 0000000..3d12cda --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/resourcemap.c @@ -0,0 +1,282 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/supermicro/h8dmr_i2/romstage.c b/src/mainboard/supermicro/h8dmr_i2/romstage.c new file mode 100644 index 0000000..7d1f834 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2/romstage.c @@ -0,0 +1,189 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/f.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + enable_smbus(); +// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + // Node 0 + DIMM0, DIMM2, 0, 0, + DIMM1, DIMM3, 0, 0, + // Node 1 + DIMM4, DIMM6, 0, 0, + DIMM5, DIMM7, 0, 0, + }; + + struct sys_info *sysinfo = &sysinfo_car; + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + sio_setup(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + w83627hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + + setup_mb_resource_map(); + + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\n"); + + set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram + setup_coherent_ht_domain(); // routing table and start other core0 + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + // It is said that we should start core1 after all core0 launched + /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, + * So here need to make sure last core0 is started, esp for two way system, + * (there may be apic id conflicts in that case) + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* it will set up chains and store link pair for optimization later */ + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + +#if CONFIG_SET_FIDVID + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo); + } + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + // show final fid and vid + { + msr_t msr; + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo); + } +#endif + + init_timer(); // Need to use TMICT to synconize FID/VID + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + // fidvid change will issue one LDTSTOP and the HT change will be effective too + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + //It's the time to set ctrl in sysinfo now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + +// enable_smbus(); /* enable in sio_setup */ + + /* all ap stopped? */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now +} diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_i2_fam10/Kconfig new file mode 100644 index 0000000..bb5a639 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/Kconfig @@ -0,0 +1,83 @@ +if BOARD_SUPERMICRO_H8DMR_I2_FAM10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F_1207 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_NVIDIA_MCP55 + select MCP55_USE_NIC + select MCP55_USE_AZA + select SUPERIO_WINBOND_W83627HF + select PARALLEL_CPU_INIT + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select AMDMCT + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default supermicro/h8dmr_i2_fam10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + +config RAMBASE + hex + default 0x200000 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xc0000 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "H8DMR-i2 (Fam10)" + +config MAX_CPUS + int + default 8 + +config MAX_PHYSICAL_CPUS + int + default 2 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_0100009f.h" + +endif # BOARD_SUPERMICRO_H8DMR_I2_FAM10 diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/README b/src/mainboard/supermicro/h8dmr_i2_fam10/README new file mode 100644 index 0000000..485e7c8 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/README @@ -0,0 +1,23 @@ + + +There are a number of outstanding issues: + +* I'm seeing toolchain issues. I can't get this tree to compile correctly with +gcc 4.3 (32 bit) - there is an optimization issue where certain parts of the +CBFS code execute very slowly. With gcc 3.4 (32 bit) that slowness +disappears. This is probably not a problem related to this port specifically. + +* setting CONFIG_DEFAULT_CONSOLE_LOGLEVEL lower than 8 simply hangs the boot +shortly after the warm reset triggered by the MCP55 code. I think this too +might be a toolchain problem (but I see it on gcc 3.4 as well as 4.3). + +* during startup, the CPU cores talk through each other on serial for a +while. Again, not an issue specific to this port. + +* to avoid very slow LZMA decompression I use this port with LZMA compression +disabled in CBFS. I'm not sure what's causing this particular slowness. + +See also this thread: http://www.coreboot.org/pipermail/coreboot/2009-September/052107.html + +Ward, 2009-09-22 + diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/board_info.txt b/src/mainboard/supermicro/h8dmr_i2_fam10/board_info.txt new file mode 100644 index 0000000..3d902b6 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/board_info.txt @@ -0,0 +1 @@ +Category: server diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/cmos.layout b/src/mainboard/supermicro/h8dmr_i2_fam10/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/devicetree.cb b/src/mainboard/supermicro/h8dmr_i2_fam10/devicetree.cb new file mode 100644 index 0000000..9e52d07 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/devicetree.cb @@ -0,0 +1,152 @@ +chip northbridge/amd/amdfam10/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # SB on link 2.0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 1-1-1 + device i2c 57 on end + end + end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + # chip drivers/generic/generic # PCIXA slot 1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB slot 1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB slot 2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI slot 1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # PCI + device pci 6.0 on end + end + device pci 6.1 on end # AZA + device pci 8.0 on end # NIC + device pci 9.0 on end # NIC + device pci a.0 on # PCI E 5 + device pci 0.0 on end # NEC PCI-X + device pci 0.1 on # NEC PCI-X + device pci 4.0 on end # SCSI + device pci 4.1 on end # SCSI + end + end + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end + end +end diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_i2_fam10/get_bus_conf.c new file mode 100644 index 0000000..a1de06c --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/get_bus_conf.c @@ -0,0 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_mcp55 = apicid_base+0; + +} diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/irq_tables.c b/src/mainboard/supermicro/h8dmr_i2_fam10/irq_tables.c new file mode 100644 index 0000000..54a4e54 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/irq_tables.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/mb_sysconf.h b/src/mainboard/supermicro/h8dmr_i2_fam10/mb_sysconf.h new file mode 100644 index 0000000..ad78ef6 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/mb_sysconf.h @@ -0,0 +1,30 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; +}; + +#endif diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/mptable.c b/src/mainboard/supermicro/h8dmr_i2_fam10/mptable.c new file mode 100644 index 0000000..4e2d48c --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/mptable.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd00012d2; + pci_write_config32(dev, 0x84, dword); + + } + + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0x17); // 23 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + + for(j=7; j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/resourcemap.c b/src/mainboard/supermicro/h8dmr_i2_fam10/resourcemap.c new file mode 100644 index 0000000..eef1811 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/resourcemap.c @@ -0,0 +1,285 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/supermicro/h8dmr_i2_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_i2_fam10/romstage.c new file mode 100644 index 0000000..b393c34 --- /dev/null +++ b/src/mainboard/supermicro/h8dmr_i2_fam10/romstage.c @@ -0,0 +1,269 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdfam10/debug.c" +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + enable_smbus(); + // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + /* set FAN ctrl to DC mode */ + smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); + dword |= (1 << 0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); + dword |= (1 << 16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); +} + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +}; + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + u32 bsp_apicid = 0, val, wants_reset; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sio_setup(); + } + + post_code(0x30); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + post_code(0x32); + + w83627hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo + 1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", + msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", + msr.hi, msr.lo); +#endif + + init_timer(); // Need to use TMICT to synconize FID/VID + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk(BIOS_DEBUG, "mcp55_early_setup_x wants additional reset!\n"); + + post_code(0x3B); + + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + post_code(0x3D); + + // printk(BIOS_DEBUG, "enable_smbus()\n"); + // enable_smbus(); /* enable in sio_setup */ + + post_code(0x40); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + + post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2 + post_code(0x42); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/Kconfig b/src/mainboard/supermicro/h8qme_2_plus_fam10/Kconfig new file mode 100644 index 0000000..dd543de --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/Kconfig @@ -0,0 +1,81 @@ +if BOARD_SUPERMICRO_H8QME_2_PLUS_FAM10 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_F_1207 + select DIMM_DDR2 + select DIMM_REGISTERED + select NORTHBRIDGE_AMD_AMDFAM10 + select SOUTHBRIDGE_AMD_AMD8132 + select SOUTHBRIDGE_NVIDIA_MCP55 + select SUPERIO_WINBOND_W83627HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select LIFT_BSP_APIC_ID + select AMDMCT + select BOARD_ROMSIZE_KB_1024 + select ENABLE_APIC_EXT_ID + select QRANK_DIMM_SUPPORT + +config MAINBOARD_DIR + string + default supermicro/h8qme_2_plus_fam10 + +config DCACHE_RAM_BASE + hex + default 0xc4000 + +config DCACHE_RAM_SIZE + hex + default 0x0c000 + +config RAMBASE + hex + default 0x200000 + +config RAMTOP + hex + default 0x1000000 + +config HEAP_SIZE + hex + default 0xff000 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "H8QME-2+ (Fam10)" + +config MAX_CPUS + int + default 16 + +config MAX_PHYSICAL_CPUS + int + default 4 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 2 + +config IRQ_SLOT_COUNT + int + default 11 + +config AMD_UCODE_PATCH_FILE + string + default "mc_patch_0100009f.h" + +endif # BOARD_SUPERMICRO_H8QME_2_PLUS_FAM10 diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/board_info.txt b/src/mainboard/supermicro/h8qme_2_plus_fam10/board_info.txt new file mode 100644 index 0000000..cb3000f --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/board_info.txt @@ -0,0 +1,2 @@ +Category: server +Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/cmos.layout b/src/mainboard/supermicro/h8qme_2_plus_fam10/cmos.layout new file mode 100644 index 0000000..1f1cab0 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## Written by Yinghai Lu yinghailu@amd.com for AMD. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/devicetree.cb b/src/mainboard/supermicro/h8qme_2_plus_fam10/devicetree.cb new file mode 100644 index 0000000..6956b45 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/devicetree.cb @@ -0,0 +1,115 @@ +chip northbridge/amd/amdfam10/root_complex # Root complex + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F_1207 # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x15d9 0x1511 inherit + chip northbridge/amd/amdfam10 # Northbridge / RAM controller + device pci 18.0 on end + device pci 18.0 on end + device pci 18.0 on # SB on link 2 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # SFI + io 0x62 = 0x100 + end + device pnp 2e.7 off # GPIO, game port, MIDI + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # WDTO PLED + device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on end + device pci 1.1 on # SM 1 + # PCI device SMBus address will + # depend on addon PCI device, do + # we need to scan_smbus_bus? + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.1 off end # AZA + device pci 7.0 on + device pci 1.0 on end + end + device pci 8.0 off end + device pci 9.0 off end + device pci a.0 on end # PCI E 5 + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on + chip southbridge/amd/amd8132 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + device pci 3.0 on end + device pci 3.1 on end + end + device pci 1.1 on end + end + end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + device pci 19.4 on end + end + end +end diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8qme_2_plus_fam10/get_bus_conf.c new file mode 100644 index 0000000..50e2b44 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/get_bus_conf.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdfam10_sysconf.h> + +#include <stdlib.h> +#include "mb_sysconf.h" + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +struct mb_sysconf_t mb_sysconf; + +/* Here you only need to set value in pci1234 for HT-IO that could be +installed or not You may need to preset pci1234 for HTIO board, please +refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ +static u32 pci1234x[] = { + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, + 0x0000ffc, 0x0000ffc, + }; + + +/* HT Chain device num, actually it is unit id base of every ht device +in chain, assume every chain only have 4 ht device at most */ + +static unsigned hcdnx[] = { + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, + 0x20202020, 0x20202020, +}; + +unsigned sbdn3; + +extern void get_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + struct mb_sysconf_t *m; + + device_t dev; + int i; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + sysconf.mb = &mb_sysconf; + + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; + + m->bus_8132_0 = (sysconf.pci1234[1] >> 12) & 0xff; + sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain + + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); + + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + } + + for(i=2; i<8;i++) { + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); + if (dev) { + m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + } + } + + /* 8132_1 */ + + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3, 0)); + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + m->bus_8132_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + m->bus_8132_2++; + + /* 8132_2 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3 + 1, 0)); + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + m->apicid_mcp55 = apicid_base+0; + m->apicid_8132_1 = apicid_base+1; + m->apicid_8132_2 = apicid_base+2; +} diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/irq_tables.c b/src/mainboard/supermicro/h8qme_2_plus_fam10/irq_tables.c new file mode 100644 index 0000000..0b58879 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/irq_tables.c @@ -0,0 +1,138 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + + + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0364; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; + + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } + +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + if(sysconf.nodes>32) { + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); + pirq_info++; slot_num++; + } +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/mb_sysconf.h b/src/mainboard/supermicro/h8qme_2_plus_fam10/mb_sysconf.h new file mode 100644 index 0000000..5a75677 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/mb_sysconf.h @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MB_SYSCONF_H +#define MB_SYSCONF_H + +struct mb_sysconf_t { + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; + + unsigned char bus_8132_0; //7 + unsigned char bus_8132_1; //8 + unsigned char bus_8132_2; //9 + unsigned apicid_8132_1; + unsigned apicid_8132_2; +}; + +#endif diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/mptable.c b/src/mainboard/supermicro/h8qme_2_plus_fam10/mptable.c new file mode 100644 index 0000000..4fbb4c8 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/mptable.c @@ -0,0 +1,117 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdfam10_sysconf.h> +#include "mb_sysconf.h" + +extern unsigned sbdn3; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + struct mb_sysconf_t *m; + unsigned sbdn; + int i, j, bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + m = sysconf.mb; + + mptable_write_buses(mc, NULL, &bus_isa); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } + + dword = 0x00000ab5; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x5ab0a500; + pci_write_config32(dev, 0x80, dword); + + dword = 0xa000000b; + pci_write_config32(dev, 0x84, dword); + + } + + + } + + mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); + + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0x5); /* 5 SMBus, OK */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0xb); /* 11 USB, OK */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0xa); /* 10 USB, OK */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x5); /* 5 IDE, OK*/ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0xa); /* 10 VGA, OK*/ + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|0, m->apicid_mcp55, 0x5); /* 5 eth0, OK*/ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|1, m->apicid_mcp55, 0xb); /* 11 eth1, OK*/ + + for(j=7;j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } + + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/resourcemap.c b/src/mainboard/supermicro/h8qme_2_plus_fam10/resourcemap.c new file mode 100644 index 0000000..eef1811 --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/resourcemap.c @@ -0,0 +1,285 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + // WARD CHANGED + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/supermicro/h8qme_2_plus_fam10/romstage.c b/src/mainboard/supermicro/h8qme_2_plus_fam10/romstage.c new file mode 100644 index 0000000..24ecb5d --- /dev/null +++ b/src/mainboard/supermicro/h8qme_2_plus_fam10/romstage.c @@ -0,0 +1,333 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define FAM10_SCAN_PCI_BUS 0 +#define FAM10_ALLOCATE_IO_RANGE 1 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <console/console.h> +#include <lib.h> +#include <spd.h> +#include <cpu/amd/model_10xxx_rev.h> +#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN +#include "northbridge/amd/amdfam10/raminit.h" +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "lib/delay.c" +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdfam10/reset_test.c" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdfam10/debug.c" +#include "northbridge/amd/amdfam10/setup_resource_map.c" +#include "southbridge/nvidia/mcp55/early_ctrl.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +#define SMBUS_SWITCH1 0x70 +#define SMBUS_SWITCH2 0x72 + smbus_send_byte(SMBUS_SWITCH1, 5 & 0x0f); + smbus_send_byte(SMBUS_SWITCH2, (5 >> 4) & 0x0f); +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdfam10/amdfam10.h" +#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" +#include "northbridge/amd/amdfam10/pci.c" +#include "resourcemap.c" +#include "cpu/amd/quadcore/quadcore.c" +#include "southbridge/nvidia/mcp55/early_setup_ss.h" +#include "southbridge/nvidia/mcp55/early_setup_car.c" +#include "cpu/amd/microcode.h" + +#include "cpu/amd/model_10xxx/init_cpus.c" +#include "northbridge/amd/amdfam10/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + enable_smbus(); +// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); +} + +static const u8 spd_addr[] = { + //first node + RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + //second node + RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, +#endif +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + //third node + RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, + //forth node + RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, +#endif +}; + +#define GPIO1_DEV PNP_DEV(0x2e, W83627HF_GAME_MIDI_GPIO1) +#define GPIO2_DEV PNP_DEV(0x2e, W83627HF_GPIO2) +#define GPIO3_DEV PNP_DEV(0x2e, W83627HF_GPIO3) + +/* TODO: superio code should really not be in mainboard */ +static void pnp_enter_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0x87, port); + outb(0x87, port); +} + +static void pnp_exit_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0xaa, port); +} + +static void write_GPIO(void) +{ + pnp_enter_ext_func_mode(GPIO1_DEV); + pnp_set_logical_device(GPIO1_DEV); + pnp_write_config(GPIO1_DEV, 0x30, 0x01); + pnp_write_config(GPIO1_DEV, 0x60, 0x00); + pnp_write_config(GPIO1_DEV, 0x61, 0x00); + pnp_write_config(GPIO1_DEV, 0x62, 0x00); + pnp_write_config(GPIO1_DEV, 0x63, 0x00); + pnp_write_config(GPIO1_DEV, 0x70, 0x00); + pnp_write_config(GPIO1_DEV, 0xf0, 0xff); + pnp_write_config(GPIO1_DEV, 0xf1, 0xff); + pnp_write_config(GPIO1_DEV, 0xf2, 0x00); + pnp_exit_ext_func_mode(GPIO1_DEV); + + pnp_enter_ext_func_mode(GPIO2_DEV); + pnp_set_logical_device(GPIO2_DEV); + pnp_write_config(GPIO2_DEV, 0x30, 0x01); + pnp_write_config(GPIO2_DEV, 0xf0, 0xef); + pnp_write_config(GPIO2_DEV, 0xf1, 0xff); + pnp_write_config(GPIO2_DEV, 0xf2, 0x00); + pnp_write_config(GPIO2_DEV, 0xf3, 0x00); + pnp_write_config(GPIO2_DEV, 0xf5, 0x48); + pnp_write_config(GPIO2_DEV, 0xf6, 0x00); + pnp_write_config(GPIO2_DEV, 0xf7, 0xc0); + pnp_exit_ext_func_mode(GPIO2_DEV); + + pnp_enter_ext_func_mode(GPIO3_DEV); + pnp_set_logical_device(GPIO3_DEV); + pnp_write_config(GPIO3_DEV, 0x30, 0x00); + pnp_write_config(GPIO3_DEV, 0xf0, 0xff); + pnp_write_config(GPIO3_DEV, 0xf1, 0xff); + pnp_write_config(GPIO3_DEV, 0xf2, 0xff); + pnp_write_config(GPIO3_DEV, 0xf3, 0x40); + pnp_exit_ext_func_mode(GPIO3_DEV); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + struct sys_info *sysinfo = &sysinfo_car; + u32 bsp_apicid = 0, val, wants_reset; + msr_t msr; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + sio_setup(); + } + + post_code(0x30); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + post_code(0x32); + + w83627hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + console_init(); + write_GPIO(); + printk(BIOS_DEBUG, "\n"); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); + + update_microcode(val); + + post_code(0x33); + + cpuSetAMDMSR(); + post_code(0x34); + + amd_ht_init(sysinfo); + post_code(0x35); + + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); + + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + + /* wait for all the APs core0 started by finalize_node_setup. */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); +#endif + + post_code(0x38); + +#if CONFIG_SET_FIDVID + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ + + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); + + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } + + post_code(0x3A); + + /* show final fid and vid */ + msr=rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); +#endif + + init_timer(); // Need to use TMICT to synconize FID/VID + + wants_reset = mcp55_early_setup_x(); + + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } + + if (wants_reset) + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); + + post_code(0x3B); + +/* It's the time to set ctrl in sysinfo now; */ +printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); +fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + +post_code(0x3D); + +//printk(BIOS_DEBUG, "enable_smbus()\n"); +// enable_smbus(); /* enable in sio_setup */ + +post_code(0x40); + + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + + post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. + post_code(0x42); // Should never see this post code. +} + +/** + * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) + * Description: + * This routine is called every time a non-coherent chain is processed. + * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a + * swap list. The first part of the list controls the BUID assignment and the + * second part of the list provides the device to device linking. Device orientation + * can be detected automatically, or explicitly. See documentation for more details. + * + * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + * based on each device's unit count. + * + * Parameters: + * @param[in] u8 node = The node on which this chain is located + * @param[in] u8 link = The link on the host for this chain + * @param[out] u8** list = supply a pointer to a list + * @param[out] BOOL result = true to use a manual list + * false to initialize the link automatically + */ +BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) +{ + static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; + /* If the BUID was adjusted in early_ht we need to do the manual override */ + if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { + printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); + if ((node == 0) && (link == 0)) { /* BSP SB link */ + *List = swaplist; + return 1; + } + } + + return 0; +} diff --git a/src/mainboard/supermicro/h8qme_fam10/Kconfig b/src/mainboard/supermicro/h8qme_fam10/Kconfig deleted file mode 100644 index 28d408e..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/Kconfig +++ /dev/null @@ -1,81 +0,0 @@ -if BOARD_SUPERMICRO_H8QME_FAM10 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F_1207 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_AMD_AMD8132 - select SOUTHBRIDGE_NVIDIA_MCP55 - select SUPERIO_WINBOND_W83627HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select AMDMCT - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - select QRANK_DIMM_SUPPORT - -config MAINBOARD_DIR - string - default supermicro/h8qme_fam10 - -config DCACHE_RAM_BASE - hex - default 0xc4000 - -config DCACHE_RAM_SIZE - hex - default 0x0c000 - -config RAMBASE - hex - default 0x200000 - -config RAMTOP - hex - default 0x1000000 - -config HEAP_SIZE - hex - default 0xff000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "H8QME-2+ (Fam10)" - -config MAX_CPUS - int - default 16 - -config MAX_PHYSICAL_CPUS - int - default 4 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 2 - -config IRQ_SLOT_COUNT - int - default 11 - -config AMD_UCODE_PATCH_FILE - string - default "mc_patch_0100009f.h" - -endif # BOARD_SUPERMICRO_H8QME_FAM10 diff --git a/src/mainboard/supermicro/h8qme_fam10/board_info.txt b/src/mainboard/supermicro/h8qme_fam10/board_info.txt deleted file mode 100644 index cb3000f..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm diff --git a/src/mainboard/supermicro/h8qme_fam10/cmos.layout b/src/mainboard/supermicro/h8qme_fam10/cmos.layout deleted file mode 100644 index 1f1cab0..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu yinghailu@amd.com for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8qme_fam10/devicetree.cb b/src/mainboard/supermicro/h8qme_fam10/devicetree.cb deleted file mode 100644 index 6956b45..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/devicetree.cb +++ /dev/null @@ -1,115 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.1 off end # AZA - device pci 7.0 on - device pci 1.0 on end - end - device pci 8.0 off end - device pci 9.0 off end - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.0 on end - device pci 19.0 on - chip southbridge/amd/amd8132 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 3.0 on end - device pci 3.1 on end - end - device pci 1.1 on end - end - end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end -end diff --git a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c deleted file mode 100644 index 50e2b44..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/get_bus_conf.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdfam10_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -/* Here you only need to set value in pci1234 for HT-IO that could be -installed or not You may need to preset pci1234 for HTIO board, please -refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */ -static u32 pci1234x[] = { - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, - 0x0000ffc, 0x0000ffc, - }; - - -/* HT Chain device num, actually it is unit id base of every ht device -in chain, assume every chain only have 4 ht device at most */ - -static unsigned hcdnx[] = { - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, - 0x20202020, 0x20202020, -}; - -unsigned sbdn3; - -extern void get_pci1234(void); - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - struct mb_sysconf_t *m; - - device_t dev; - int i; - - if(get_bus_conf_done==1) return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i<sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; - - m->bus_8132_0 = (sysconf.pci1234[1] >> 12) & 0xff; - sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } - - for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } - } - - /* 8132_1 */ - - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3, 0)); - m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - m->bus_8132_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - m->bus_8132_2++; - - /* 8132_2 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(sbdn3 + 1, 0)); - m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - -/*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - m->apicid_mcp55 = apicid_base+0; - m->apicid_8132_1 = apicid_base+1; - m->apicid_8132_2 = apicid_base+2; -} diff --git a/src/mainboard/supermicro/h8qme_fam10/irq_tables.c b/src/mainboard/supermicro/h8qme_fam10/irq_tables.c deleted file mode 100644 index 0b58879..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/irq_tables.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - - - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum=0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0364; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); - pirq_info++; slot_num++; - - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); - pirq_info++; slot_num++; - } - -#if CONFIG_CBB - write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); - pirq_info++; slot_num++; - if(sysconf.nodes>32) { - write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0x4ca0, 0x2, 0x4ca0, 0x3, 0x4ca0, 0x4, 0x4ca0, 0, 0); - pirq_info++; slot_num++; - } -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long) pirq_info; - -} diff --git a/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h b/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h deleted file mode 100644 index 5a75677..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/mb_sysconf.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; - - unsigned char bus_8132_0; //7 - unsigned char bus_8132_1; //8 - unsigned char bus_8132_2; //9 - unsigned apicid_8132_1; - unsigned apicid_8132_2; -}; - -#endif diff --git a/src/mainboard/supermicro/h8qme_fam10/mptable.c b/src/mainboard/supermicro/h8qme_fam10/mptable.c deleted file mode 100644 index 4fbb4c8..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/mptable.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -extern unsigned sbdn3; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); - } - - dword = 0x00000ab5; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x5ab0a500; - pci_write_config32(dev, 0x80, dword); - - dword = 0xa000000b; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0x5); /* 5 SMBus, OK */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0xb); /* 11 USB, OK */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0xa); /* 10 USB, OK */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x5); /* 5 IDE, OK*/ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+6)<<2)|1, m->apicid_mcp55, 0xa); /* 10 VGA, OK*/ - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|0, m->apicid_mcp55, 0x5); /* 5 eth0, OK*/ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_8132_2, ((3)<<2)|1, m->apicid_mcp55, 0xb); /* 11 eth1, OK*/ - - for(j=7;j>=2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8qme_fam10/resourcemap.c b/src/mainboard/supermicro/h8qme_fam10/resourcemap.c deleted file mode 100644 index eef1811..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/resourcemap.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - // WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - // WARD CHANGED - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000203, /* link 2 of cpu 0 --> Nvidia MCP55 Pro */ - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c deleted file mode 100644 index 24ecb5d..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghailu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define FAM10_SCAN_PCI_BUS 0 -#define FAM10_ALLOCATE_IO_RANGE 1 - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <lib.h> -#include <spd.h> -#include <cpu/amd/model_10xxx_rev.h> -#include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN -#include "northbridge/amd/amdfam10/raminit.h" -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "lib/delay.c" -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdfam10/reset_test.c" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdfam10/debug.c" -#include "northbridge/amd/amdfam10/setup_resource_map.c" -#include "southbridge/nvidia/mcp55/early_ctrl.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -static inline void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - smbus_send_byte(SMBUS_SWITCH1, 5 & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (5 >> 4) & 0x0f); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdfam10/amdfam10.h" -#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" -#include "northbridge/amd/amdfam10/pci.c" -#include "resourcemap.c" -#include "cpu/amd/quadcore/quadcore.c" -#include "southbridge/nvidia/mcp55/early_setup_ss.h" -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/microcode.h" - -#include "cpu/amd/model_10xxx/init_cpus.c" -#include "northbridge/amd/amdfam10/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - enable_smbus(); -// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); -} - -static const u8 spd_addr[] = { - //first node - RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, -#endif -#if CONFIG_MAX_PHYSICAL_CPUS > 2 - //third node - RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, - //forth node - RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, -#endif -}; - -#define GPIO1_DEV PNP_DEV(0x2e, W83627HF_GAME_MIDI_GPIO1) -#define GPIO2_DEV PNP_DEV(0x2e, W83627HF_GPIO2) -#define GPIO3_DEV PNP_DEV(0x2e, W83627HF_GPIO3) - -/* TODO: superio code should really not be in mainboard */ -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void write_GPIO(void) -{ - pnp_enter_ext_func_mode(GPIO1_DEV); - pnp_set_logical_device(GPIO1_DEV); - pnp_write_config(GPIO1_DEV, 0x30, 0x01); - pnp_write_config(GPIO1_DEV, 0x60, 0x00); - pnp_write_config(GPIO1_DEV, 0x61, 0x00); - pnp_write_config(GPIO1_DEV, 0x62, 0x00); - pnp_write_config(GPIO1_DEV, 0x63, 0x00); - pnp_write_config(GPIO1_DEV, 0x70, 0x00); - pnp_write_config(GPIO1_DEV, 0xf0, 0xff); - pnp_write_config(GPIO1_DEV, 0xf1, 0xff); - pnp_write_config(GPIO1_DEV, 0xf2, 0x00); - pnp_exit_ext_func_mode(GPIO1_DEV); - - pnp_enter_ext_func_mode(GPIO2_DEV); - pnp_set_logical_device(GPIO2_DEV); - pnp_write_config(GPIO2_DEV, 0x30, 0x01); - pnp_write_config(GPIO2_DEV, 0xf0, 0xef); - pnp_write_config(GPIO2_DEV, 0xf1, 0xff); - pnp_write_config(GPIO2_DEV, 0xf2, 0x00); - pnp_write_config(GPIO2_DEV, 0xf3, 0x00); - pnp_write_config(GPIO2_DEV, 0xf5, 0x48); - pnp_write_config(GPIO2_DEV, 0xf6, 0x00); - pnp_write_config(GPIO2_DEV, 0xf7, 0xc0); - pnp_exit_ext_func_mode(GPIO2_DEV); - - pnp_enter_ext_func_mode(GPIO3_DEV); - pnp_set_logical_device(GPIO3_DEV); - pnp_write_config(GPIO3_DEV, 0x30, 0x00); - pnp_write_config(GPIO3_DEV, 0xf0, 0xff); - pnp_write_config(GPIO3_DEV, 0xf1, 0xff); - pnp_write_config(GPIO3_DEV, 0xf2, 0xff); - pnp_write_config(GPIO3_DEV, 0xf3, 0x40); - pnp_exit_ext_func_mode(GPIO3_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = &sysinfo_car; - u32 bsp_apicid = 0, val, wants_reset; - msr_t msr; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sio_setup(); - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - post_code(0x32); - - w83627hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - write_GPIO(); - printk(BIOS_DEBUG, "\n"); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ - - wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - -#if CONFIG_SET_FIDVID - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); -#endif - - init_timer(); // Need to use TMICT to synconize FID/VID - - wants_reset = mcp55_early_setup_x(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } - - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); - - post_code(0x3B); - -/* It's the time to set ctrl in sysinfo now; */ -printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); -fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - -post_code(0x3D); - -//printk(BIOS_DEBUG, "enable_smbus()\n"); -// enable_smbus(); /* enable in sio_setup */ - -post_code(0x40); - - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); - - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x42); // Should never see this post code. -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] u8 node = The node on which this chain is located - * @param[in] u8 link = The link on the host for this chain - * @param[out] u8** list = supply a pointer to a list - * @param[out] BOOL result = true to use a manual list - * false to initialize the link automatically - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} diff --git a/src/mainboard/supermicro/x7db8/Kconfig b/src/mainboard/supermicro/x7db8/Kconfig deleted file mode 100644 index f5b0e11..0000000 --- a/src/mainboard/supermicro/x7db8/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -if BOARD_SUPERMICRO_X7DB8 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_LGA771 - select SOUTHBRIDGE_INTEL_I3100 - select NORTHBRIDGE_INTEL_I5000 - select SUPERIO_WINBOND_W83627HF - select BOARD_ROMSIZE_KB_512 - select HAVE_PIRQ_TABLE - select DRIVERS_I2C_W83793 - select DRIVERS_GENERIC_IOAPIC - select BROKEN_CAR_MIGRATE - -config MAINBOARD_DIR - string - default supermicro/x7db8 - -config DCACHE_RAM_BASE - hex - default 0xffdf8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config MAINBOARD_PART_NUMBER - string - default "X7DB8 / X7DB8+" - -config MMCONF_BASE_ADDRESS - hex - default 0xe0000000 - -config IRQ_SLOT_COUNT - int - default 48 - -config MAX_CPUS - int - default 8 - -endif diff --git a/src/mainboard/supermicro/x7db8/board_info.txt b/src/mainboard/supermicro/x7db8/board_info.txt deleted file mode 100644 index fee61ac..0000000 --- a/src/mainboard/supermicro/x7db8/board_info.txt +++ /dev/null @@ -1,5 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/products/motherboard/xeon1333/5000p/x7db8_.cfm -ROM package: PLCC32 -ROM protocol: FWH -ROM socketed: y diff --git a/src/mainboard/supermicro/x7db8/cmos.layout b/src/mainboard/supermicro/x7db8/cmos.layout deleted file mode 100644 index f8444e3..0000000 --- a/src/mainboard/supermicro/x7db8/cmos.layout +++ /dev/null @@ -1,140 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2007-2008 coresystems GmbH -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; version 2 of -# the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -# ----------------------------------------------------------------- -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -# ----------------------------------------------------------------- -# Status Register A -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -# ----------------------------------------------------------------- -# Status Register B -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -#409 2 e 7 power_on_after_fail -#411 5 r 0 unused - -# coreboot config options: bootloader -416 512 s 0 boot_devices -928 8 h 0 boot_default -936 1 e 8 cmos_defaults_loaded -937 1 e 1 lpt -#938 46 r 0 unused - -# coreboot config options: check sums -984 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 No -8 1 Yes -9 0 Secondary -9 1 Primary -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/x7db8/devicetree.cb b/src/mainboard/supermicro/x7db8/devicetree.cb deleted file mode 100644 index e09619f..0000000 --- a/src/mainboard/supermicro/x7db8/devicetree.cb +++ /dev/null @@ -1,182 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2009 coresystems GmbH -## Copyright (C) 2011 Sven Schnelle svens@stackframe.org -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -chip northbridge/intel/i5000 - - device cpu_cluster 0 on - chip cpu/intel/socket_LGA771 - device lapic 0 on end - end - end - - device domain 0 on - device pci 00.0 on # Host bridge - subsystemid 0x15d9 0x2017 - end - - device pci 02.0 on # PCI Express x8 Port 2-3 - ioapic_irq 8 INTA 0x10 - ioapic_irq 8 INTB 0x11 - ioapic_irq 8 INTC 0x12 - ioapic_irq 8 INTD 0x13 - device pci 00.0 on # PCI Express Upstream Port - device pci 00.0 on # PCI Express Downstream Port E1 - device pci 00.0 on # 6700PXH PCI Express-to-PCI Bridge A - ioapic_irq 8 INTA 0x11 - ioapic_irq 8 INTB 0x10 - ioapic_irq 8 INTC 0x11 - ioapic_irq 8 INTD 0x10 - # PCI slot - device pci 00.2 on # 6700PXH PCI Express-to-PCI Bridge B - # PCI slot - end - device pci 02.0 on # Adaptec U320 #1 - ioapic_irq 8 INTA 0x10 - end - device pci 02.1 on # Adaptec U320 #2 - ioapic_irq 8 INTB 0x11 - end - end - end - device pci 00.1 on end - device pci 00.3 on end - end - - device pci 03.0 on end - device pci 04.0 on end - device pci 05.0 on end - device pci 06.0 on end - device pci 07.0 on end - device pci 00.3 on # PCI Express to PCI-X Bridge - ioapic_irq 9 INTA 3 - ioapic_irq 9 INTB 0 - ioapic_irq 9 INTC 1 - ioapic_irq 9 INTD 2 - # PCI-X Slot - end - end - - device pci 03.0 on - ioapic_irq 8 INTA 0x10 - end - device pci 04.0 on - ioapic_irq 8 INTA 0x10 - end - device pci 05.0 on - ioapic_irq 8 INTA 0x10 - end - device pci 06.0 on - ioapic_irq 8 INTA 0x10 - end - device pci 07.0 on - ioapic_irq 8 INTA 0x10 - end - - device pci 10.0 on end # FBD - device pci 10.1 on end # FBD - device pci 10.2 on end # FBD - device pci 11.0 on end # FBD reserved - device pci 13.0 on end # FBD reserved - device pci 15.0 on end # FBD - device pci 16.0 on end # FBD - - chip southbridge/intel/i3100 - register "pirq_a_d" = "0x0b0b0b0b" - register "pirq_e_h" = "0x80808080" - register "sata_ports_implemented" = "0x3f" - - device pci 1c.0 on - ioapic_irq 8 INTA 0x14 - ioapic_irq 8 INTB 0x15 - ioapic_irq 8 INTC 0x16 - ioapic_irq 8 INTD 0x17 - end # PCIe bridge - device pci 1d.0 on - ioapic_irq 8 INTA 0x10 - end # USB UHCI - device pci 1d.1 on - ioapic_irq 8 INTB 0x11 - end # USB UHCI - device pci 1d.2 on - ioapic_irq 8 INTC 0x12 - end # USB UHCI - device pci 1d.3 on - ioapic_irq 8 INTD 0x13 - end # USB UHCI - device pci 1d.7 on end # USB2 EHCI - device pci 1e.0 on - device pci 01.0 on end - end - - device pci 1f.0 on # PCI-LPC bridge - ioapic_irq 8 INTA 0x11 - subsystemid 0x15d9 0x2009 - chip superio/winbond/w83627hf - device pnp 2e.0 off end # FDC - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Serial Port 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - - device pnp 2e.3 off end - device pnp 2e.5 on # KBC - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # Game port / MIDI - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 on end # GPIO3 - device pnp 2e.a on end # ACPI - device pnp 2e.b off end # HWMON - end - end - device pci 1f.1 off end # IDE - device pci 1f.2 on end # SATA - device pci 1f.3 on - chip drivers/i2c/w83793 - register "mfc" = "0x28" - register "fanin" = "0x1f" - register "peci_agent_conf" = "0x33" - register "tcase0" = "0x5e" - register "tcase1" = "0x5e" - register "tcase2" = "0x5e" - register "tcase3" = "0x5e" - register "tr_enable" = "0x01" - register "critical_temperature" = "0x7f" - register "td1_fan_select" = "0x01" - register "td2_fan_select" = "0x01" - register "td3_fan_select" = "0x01" - register "td4_fan_select" = "0x01" - device i2c 0x2f on end - end - end # SMBUS - end - end -end diff --git a/src/mainboard/supermicro/x7db8/irq_tables.c b/src/mainboard/supermicro/x7db8/irq_tables.c deleted file mode 100644 index 65c1822..0000000 --- a/src/mainboard/supermicro/x7db8/irq_tables.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Thomas Jourdan thomas.jourdan@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x1f << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x2670, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). - */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x1c << 3) | 0x0, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1c << 3) | 0x1, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1c << 3) | 0x2, {{0x00, 0x0000}, {0x00, 0x0000}, {0x62, 0x1ef8}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1c << 3) | 0x3, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x63, 0x1ef8}}, 0, 0}, - {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1d << 3) | 0x1, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1d << 3) | 0x2, {{0x00, 0x0000}, {0x00, 0x0000}, {0x62, 0x1ef8}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1d << 3) | 0x3, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x63, 0x1ef8}}, 0, 0}, - {0x00, (0x1d << 3) | 0x7, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1f << 3) | 0x1, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - {0x00, (0x1f << 3) | 0x2, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/supermicro/x7db8/mainboard.c b/src/mainboard/supermicro/x7db8/mainboard.c deleted file mode 100644 index 1d666c9..0000000 --- a/src/mainboard/supermicro/x7db8/mainboard.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <delay.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <arch/io.h> - -static void mainboard_enable(device_t dev) -{ -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/supermicro/x7db8/romstage.c b/src/mainboard/supermicro/x7db8/romstage.c deleted file mode 100644 index 83e34b5..0000000 --- a/src/mainboard/supermicro/x7db8/romstage.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <device/pci_def.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <lib.h> -#include <console/console.h> -#include <cpu/x86/bist.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <northbridge/intel/i5000/raminit.h> -#include "northbridge/intel/i3100/i3100.h" -#include "southbridge/intel/i3100/i3100.h" -#include <southbridge/intel/i3100/early_smbus.c> - -#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D3F0) -#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) - -#define RCBA_RPC 0x0224 /* 32 bit */ -#define RCBA_HPTC 0x3404 /* 32 bit */ -#define RCBA_GCS 0x3410 /* 32 bit */ -#define RCBA_FD 0x3418 /* 32 bit */ - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - -static void early_config(void) -{ - u32 gcs, rpc, fd; - - /* Enable RCBA */ - pci_write_config32(PCI_DEV(0, 0x1F, 0), RCBA, DEFAULT_RCBA | 1); - - /* Disable watchdog */ - gcs = read32(DEFAULT_RCBA + RCBA_GCS); - gcs |= (1 << 5); /* No reset */ - write32(DEFAULT_RCBA + RCBA_GCS, gcs); - - /* Configure PCIe port B as 4x */ - rpc = read32(DEFAULT_RCBA + RCBA_RPC); - rpc |= (3 << 0); - write32(DEFAULT_RCBA + RCBA_RPC, rpc); - - /* Disable Modem, Audio, PCIe ports 2/3/4 */ - fd = read32(DEFAULT_RCBA + RCBA_FD); - fd |= (1 << 19) | (1 << 18) | (1 << 17) | (1 << 6) | (1 << 5); - write32(DEFAULT_RCBA + RCBA_FD, fd); - - /* Enable HPET */ - write32(DEFAULT_RCBA + RCBA_HPTC, (1 << 7)); - - /* Setup sata mode */ - pci_write_config8(PCI_DEV(0, 0x1F, 2), SATA_MAP, 0x40); -} - -#define DEFAULT_GPIOBASE 0x1180 -static void setup_gpio(void) -{ - pci_write_config32(PCI_DEV(0, 31, 0), 0x48, DEFAULT_GPIOBASE | 1); - pci_write_config8(PCI_DEV(0, 31, 0), 0x4c, (1 << 4)); - - outl(0xff0c79cf, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xe700ffff, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0x65b70000, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - outl(0x0000718a, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x00000106, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000301, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x00030301, DEFAULT_GPIOBASE + 0x38); /* GPIO_LVL2 */ -} - -static void i5000_lpc_config(void) -{ - pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); -} - -int mainboard_set_fbd_clock(int speed) -{ - switch(speed) { - case 533: - smbus_write_byte(0x6f, 0x80, 0x21); - return 0; - case 667: - smbus_write_byte(0x6f, 0x80, 0x23); - return 0; - default: - printk(BIOS_ERR, "Invalid clock: %dMHz\n", speed); - die(""); - return -1; - } -} - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - if (bist == 0) - enable_lapic(); - - i5000_lpc_config(); - - winbond_enable_serial(SERIAL_DEV, 0x3f8); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - early_config(); - - setup_gpio(); - - enable_smbus(); - - outb(0x07, 0x11b8); - - /* These are smbus write captured with serialice. They - seem to setup the clock generator */ - - smbus_write_byte(0x6f, 0x88, 0x1f); - smbus_write_byte(0x6f, 0x81, 0xff); - smbus_write_byte(0x6f, 0x82, 0xff); - smbus_write_byte(0x6f, 0x80, 0x23); - - outb(0x03, 0x11b8); - outb(0x01, 0x11b8); - - pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1); - i5000_fbdimm_init(); - smbus_write_byte(0x69, 0x01, 0x01); -} diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/Kconfig b/src/mainboard/supermicro/x7db8___x7db8_plus/Kconfig new file mode 100644 index 0000000..88f1e55 --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/Kconfig @@ -0,0 +1,43 @@ +if BOARD_SUPERMICRO_X7DB8___X7DB8_PLUS + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_INTEL_SOCKET_LGA771 + select SOUTHBRIDGE_INTEL_I3100 + select NORTHBRIDGE_INTEL_I5000 + select SUPERIO_WINBOND_W83627HF + select BOARD_ROMSIZE_KB_512 + select HAVE_PIRQ_TABLE + select DRIVERS_I2C_W83793 + select DRIVERS_GENERIC_IOAPIC + select BROKEN_CAR_MIGRATE + +config MAINBOARD_DIR + string + default supermicro/x7db8___x7db8_plus + +config DCACHE_RAM_BASE + hex + default 0xffdf8000 + +config DCACHE_RAM_SIZE + hex + default 0x8000 + +config MAINBOARD_PART_NUMBER + string + default "X7DB8 / X7DB8+" + +config MMCONF_BASE_ADDRESS + hex + default 0xe0000000 + +config IRQ_SLOT_COUNT + int + default 48 + +config MAX_CPUS + int + default 8 + +endif diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/board_info.txt b/src/mainboard/supermicro/x7db8___x7db8_plus/board_info.txt new file mode 100644 index 0000000..fee61ac --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/board_info.txt @@ -0,0 +1,5 @@ +Category: server +Board URL: http://www.supermicro.com/products/motherboard/xeon1333/5000p/x7db8_.cfm +ROM package: PLCC32 +ROM protocol: FWH +ROM socketed: y diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/cmos.layout b/src/mainboard/supermicro/x7db8___x7db8_plus/cmos.layout new file mode 100644 index 0000000..f8444e3 --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/cmos.layout @@ -0,0 +1,140 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2007-2008 coresystems GmbH +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; version 2 of +# the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +# ----------------------------------------------------------------- +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +# ----------------------------------------------------------------- +# Status Register A +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +# ----------------------------------------------------------------- +# Status Register B +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +# ----------------------------------------------------------------- +# Status Register C +#96 4 r 0 status_c_rsvd +#100 1 r 0 uf_flag +#101 1 r 0 af_flag +#102 1 r 0 pf_flag +#103 1 r 0 irqf_flag +# ----------------------------------------------------------------- +# Status Register D +#104 7 r 0 status_d_rsvd +#111 1 r 0 valid_cmos_ram +# ----------------------------------------------------------------- +# Diagnostic Status Register +#112 8 r 0 diag_rsvd1 + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory +#120 264 r 0 unused + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +385 1 e 4 last_boot +388 4 r 0 reboot_bits +#390 2 r 0 unused? + +# ----------------------------------------------------------------- +# coreboot config options: console +392 3 e 5 baud_rate +395 4 e 6 debug_level +#399 1 r 0 unused + +# coreboot config options: cpu +400 1 e 2 hyper_threading +#401 7 r 0 unused + +# coreboot config options: southbridge +408 1 e 1 nmi +#409 2 e 7 power_on_after_fail +#411 5 r 0 unused + +# coreboot config options: bootloader +416 512 s 0 boot_devices +928 8 h 0 boot_default +936 1 e 8 cmos_defaults_loaded +937 1 e 1 lpt +#938 46 r 0 unused + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 1 Emergency +6 2 Alert +6 3 Critical +6 4 Error +6 5 Warning +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Disable +7 1 Enable +7 2 Keep +8 0 No +8 1 Yes +9 0 Secondary +9 1 Primary +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/devicetree.cb b/src/mainboard/supermicro/x7db8___x7db8_plus/devicetree.cb new file mode 100644 index 0000000..e09619f --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/devicetree.cb @@ -0,0 +1,182 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle svens@stackframe.org +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/i5000 + + device cpu_cluster 0 on + chip cpu/intel/socket_LGA771 + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x15d9 0x2017 + end + + device pci 02.0 on # PCI Express x8 Port 2-3 + ioapic_irq 8 INTA 0x10 + ioapic_irq 8 INTB 0x11 + ioapic_irq 8 INTC 0x12 + ioapic_irq 8 INTD 0x13 + device pci 00.0 on # PCI Express Upstream Port + device pci 00.0 on # PCI Express Downstream Port E1 + device pci 00.0 on # 6700PXH PCI Express-to-PCI Bridge A + ioapic_irq 8 INTA 0x11 + ioapic_irq 8 INTB 0x10 + ioapic_irq 8 INTC 0x11 + ioapic_irq 8 INTD 0x10 + # PCI slot + device pci 00.2 on # 6700PXH PCI Express-to-PCI Bridge B + # PCI slot + end + device pci 02.0 on # Adaptec U320 #1 + ioapic_irq 8 INTA 0x10 + end + device pci 02.1 on # Adaptec U320 #2 + ioapic_irq 8 INTB 0x11 + end + end + end + device pci 00.1 on end + device pci 00.3 on end + end + + device pci 03.0 on end + device pci 04.0 on end + device pci 05.0 on end + device pci 06.0 on end + device pci 07.0 on end + device pci 00.3 on # PCI Express to PCI-X Bridge + ioapic_irq 9 INTA 3 + ioapic_irq 9 INTB 0 + ioapic_irq 9 INTC 1 + ioapic_irq 9 INTD 2 + # PCI-X Slot + end + end + + device pci 03.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 04.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 05.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 06.0 on + ioapic_irq 8 INTA 0x10 + end + device pci 07.0 on + ioapic_irq 8 INTA 0x10 + end + + device pci 10.0 on end # FBD + device pci 10.1 on end # FBD + device pci 10.2 on end # FBD + device pci 11.0 on end # FBD reserved + device pci 13.0 on end # FBD reserved + device pci 15.0 on end # FBD + device pci 16.0 on end # FBD + + chip southbridge/intel/i3100 + register "pirq_a_d" = "0x0b0b0b0b" + register "pirq_e_h" = "0x80808080" + register "sata_ports_implemented" = "0x3f" + + device pci 1c.0 on + ioapic_irq 8 INTA 0x14 + ioapic_irq 8 INTB 0x15 + ioapic_irq 8 INTC 0x16 + ioapic_irq 8 INTD 0x17 + end # PCIe bridge + device pci 1d.0 on + ioapic_irq 8 INTA 0x10 + end # USB UHCI + device pci 1d.1 on + ioapic_irq 8 INTB 0x11 + end # USB UHCI + device pci 1d.2 on + ioapic_irq 8 INTC 0x12 + end # USB UHCI + device pci 1d.3 on + ioapic_irq 8 INTD 0x13 + end # USB UHCI + device pci 1d.7 on end # USB2 EHCI + device pci 1e.0 on + device pci 01.0 on end + end + + device pci 1f.0 on # PCI-LPC bridge + ioapic_irq 8 INTA 0x11 + subsystemid 0x15d9 0x2009 + chip superio/winbond/w83627hf + device pnp 2e.0 off end # FDC + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Serial Port 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + + device pnp 2e.3 off end + device pnp 2e.5 on # KBC + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + + device pnp 2e.6 off end # CIR + device pnp 2e.7 off end # Game port / MIDI + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 on end # GPIO3 + device pnp 2e.a on end # ACPI + device pnp 2e.b off end # HWMON + end + end + device pci 1f.1 off end # IDE + device pci 1f.2 on end # SATA + device pci 1f.3 on + chip drivers/i2c/w83793 + register "mfc" = "0x28" + register "fanin" = "0x1f" + register "peci_agent_conf" = "0x33" + register "tcase0" = "0x5e" + register "tcase1" = "0x5e" + register "tcase2" = "0x5e" + register "tcase3" = "0x5e" + register "tr_enable" = "0x01" + register "critical_temperature" = "0x7f" + register "td1_fan_select" = "0x01" + register "td2_fan_select" = "0x01" + register "td3_fan_select" = "0x01" + register "td4_fan_select" = "0x01" + device i2c 0x2f on end + end + end # SMBUS + end + end +end diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/irq_tables.c b/src/mainboard/supermicro/x7db8___x7db8_plus/irq_tables.c new file mode 100644 index 0000000..65c1822 --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/irq_tables.c @@ -0,0 +1,57 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Thomas Jourdan thomas.jourdan@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x2670, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). + */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x1c << 3) | 0x0, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1c << 3) | 0x1, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1c << 3) | 0x2, {{0x00, 0x0000}, {0x00, 0x0000}, {0x62, 0x1ef8}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1c << 3) | 0x3, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x63, 0x1ef8}}, 0, 0}, + {0x00, (0x1d << 3) | 0x0, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1d << 3) | 0x1, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1d << 3) | 0x2, {{0x00, 0x0000}, {0x00, 0x0000}, {0x62, 0x1ef8}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1d << 3) | 0x3, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x63, 0x1ef8}}, 0, 0}, + {0x00, (0x1d << 3) | 0x7, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1f << 3) | 0x1, {{0x60, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + {0x00, (0x1f << 3) | 0x2, {{0x00, 0x0000}, {0x61, 0x1ef8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0, 0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/mainboard.c b/src/mainboard/supermicro/x7db8___x7db8_plus/mainboard.c new file mode 100644 index 0000000..1d666c9 --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/mainboard.c @@ -0,0 +1,36 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <arch/io.h> +#include <delay.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <arch/io.h> + +static void mainboard_enable(device_t dev) +{ +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/supermicro/x7db8___x7db8_plus/romstage.c b/src/mainboard/supermicro/x7db8___x7db8_plus/romstage.c new file mode 100644 index 0000000..83e34b5 --- /dev/null +++ b/src/mainboard/supermicro/x7db8___x7db8_plus/romstage.c @@ -0,0 +1,150 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * Copyright (C) 2011 Sven Schnelle svens@stackframe.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627hf/w83627hf.h> +#include <northbridge/intel/i5000/raminit.h> +#include "northbridge/intel/i3100/i3100.h" +#include "southbridge/intel/i3100/i3100.h" +#include <southbridge/intel/i3100/early_smbus.c> + +#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D3F0) +#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) + +#define RCBA_RPC 0x0224 /* 32 bit */ +#define RCBA_HPTC 0x3404 /* 32 bit */ +#define RCBA_GCS 0x3410 /* 32 bit */ +#define RCBA_FD 0x3418 /* 32 bit */ + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void early_config(void) +{ + u32 gcs, rpc, fd; + + /* Enable RCBA */ + pci_write_config32(PCI_DEV(0, 0x1F, 0), RCBA, DEFAULT_RCBA | 1); + + /* Disable watchdog */ + gcs = read32(DEFAULT_RCBA + RCBA_GCS); + gcs |= (1 << 5); /* No reset */ + write32(DEFAULT_RCBA + RCBA_GCS, gcs); + + /* Configure PCIe port B as 4x */ + rpc = read32(DEFAULT_RCBA + RCBA_RPC); + rpc |= (3 << 0); + write32(DEFAULT_RCBA + RCBA_RPC, rpc); + + /* Disable Modem, Audio, PCIe ports 2/3/4 */ + fd = read32(DEFAULT_RCBA + RCBA_FD); + fd |= (1 << 19) | (1 << 18) | (1 << 17) | (1 << 6) | (1 << 5); + write32(DEFAULT_RCBA + RCBA_FD, fd); + + /* Enable HPET */ + write32(DEFAULT_RCBA + RCBA_HPTC, (1 << 7)); + + /* Setup sata mode */ + pci_write_config8(PCI_DEV(0, 0x1F, 2), SATA_MAP, 0x40); +} + +#define DEFAULT_GPIOBASE 0x1180 +static void setup_gpio(void) +{ + pci_write_config32(PCI_DEV(0, 31, 0), 0x48, DEFAULT_GPIOBASE | 1); + pci_write_config8(PCI_DEV(0, 31, 0), 0x4c, (1 << 4)); + + outl(0xff0c79cf, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe700ffff, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0x65b70000, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + outl(0x0000718a, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x00000106, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x00000301, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x00030301, DEFAULT_GPIOBASE + 0x38); /* GPIO_LVL2 */ +} + +static void i5000_lpc_config(void) +{ + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f); +} + +int mainboard_set_fbd_clock(int speed) +{ + switch(speed) { + case 533: + smbus_write_byte(0x6f, 0x80, 0x21); + return 0; + case 667: + smbus_write_byte(0x6f, 0x80, 0x23); + return 0; + default: + printk(BIOS_ERR, "Invalid clock: %dMHz\n", speed); + die(""); + return -1; + } +} + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + if (bist == 0) + enable_lapic(); + + i5000_lpc_config(); + + winbond_enable_serial(SERIAL_DEV, 0x3f8); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + early_config(); + + setup_gpio(); + + enable_smbus(); + + outb(0x07, 0x11b8); + + /* These are smbus write captured with serialice. They + seem to setup the clock generator */ + + smbus_write_byte(0x6f, 0x88, 0x1f); + smbus_write_byte(0x6f, 0x81, 0xff); + smbus_write_byte(0x6f, 0x82, 0xff); + smbus_write_byte(0x6f, 0x80, 0x23); + + outb(0x03, 0x11b8); + outb(0x01, 0x11b8); + + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xf0, DEFAULT_RCBA | 1); + i5000_fbdimm_init(); + smbus_write_byte(0x69, 0x01, 0x01); +} diff --git a/src/mainboard/technexion/Kconfig b/src/mainboard/technexion/Kconfig index c85266f..e6767ae 100644 --- a/src/mainboard/technexion/Kconfig +++ b/src/mainboard/technexion/Kconfig @@ -3,15 +3,15 @@ if VENDOR_TECHNEXION choice prompt "Mainboard model"
-config BOARD_TECHNEXION_TIM5690 +config BOARD_TECHNEXION_TIM_5690 bool "TIM-5690" -config BOARD_TECHNEXION_TIM8690 +config BOARD_TECHNEXION_TIM_8690 bool "TIM-8690"
endchoice
-source "src/mainboard/technexion/tim5690/Kconfig" -source "src/mainboard/technexion/tim8690/Kconfig" +source "src/mainboard/technexion/tim_5690/Kconfig" +source "src/mainboard/technexion/tim_8690/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/technexion/tim5690/Kconfig b/src/mainboard/technexion/tim5690/Kconfig deleted file mode 100644 index 072919d..0000000 --- a/src/mainboard/technexion/tim5690/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_TECHNEXION_TIM5690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select GFXUMA - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default technexion/tim5690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "TIM-5690" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config HEAP_SIZE - hex - default 0x4000 - -endif # BOARD_TECHNEXION_TIM5690 diff --git a/src/mainboard/technexion/tim5690/Makefile.inc b/src/mainboard/technexion/tim5690/Makefile.inc deleted file mode 100644 index 878dbab..0000000 --- a/src/mainboard/technexion/tim5690/Makefile.inc +++ /dev/null @@ -1,26 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# Needed by irq_tables and mptable and acpi_tables. - -# This is debug message for products of Technexion. -ramstage-y += tn_post_code.c - -ramstage-y += speaker.c -ramstage-$(CONFIG_VGA_ROM_RUN) += vgabios.c diff --git a/src/mainboard/technexion/tim5690/acpi/ide.asl b/src/mainboard/technexion/tim5690/acpi/ide.asl deleted file mode 100644 index 7cee00d..0000000 --- a/src/mainboard/technexion/tim5690/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/technexion/tim5690/acpi/routing.asl b/src/mainboard/technexion/tim5690/acpi/routing.asl deleted file mode 100644 index 8f7419a..0000000 --- a/src/mainboard/technexion/tim5690/acpi/routing.asl +++ /dev/null @@ -1,258 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/technexion/tim5690/acpi/sata.asl b/src/mainboard/technexion/tim5690/acpi/sata.asl deleted file mode 100644 index 1fadf40..0000000 --- a/src/mainboard/technexion/tim5690/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/technexion/tim5690/acpi/usb.asl b/src/mainboard/technexion/tim5690/acpi/usb.asl deleted file mode 100644 index dea57cf..0000000 --- a/src/mainboard/technexion/tim5690/acpi/usb.asl +++ /dev/null @@ -1,162 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -/* If (LLessEqual(UOM5,9)) { -* Scope (_GPE) { -* Method (_L1A) { -* UCOC() -* if (LEqual(GPB5,PLC5)) { -* Not(PLC5,PLC5) -* Store(PLC5, _SB.PT5D) -* } -* } -* } -* } -*/ - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/technexion/tim5690/acpi_tables.c b/src/mainboard/technexion/tim5690/acpi_tables.c deleted file mode 100644 index a3b35d5..0000000 --- a/src/mainboard/technexion/tim5690/acpi_tables.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/technexion/tim5690/board_info.txt b/src/mainboard/technexion/tim5690/board_info.txt deleted file mode 100644 index c63907a..0000000 --- a/src/mainboard/technexion/tim5690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.technexion.com/index.php/embedded-mainboards/amd/tim-5690 diff --git a/src/mainboard/technexion/tim5690/cmos.layout b/src/mainboard/technexion/tim5690/cmos.layout deleted file mode 100644 index d118897..0000000 --- a/src/mainboard/technexion/tim5690/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -## -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/technexion/tim5690/devicetree.cb b/src/mainboard/technexion/tim5690/devicetree.cb deleted file mode 100644 index 23b9741..0000000 --- a/src/mainboard/technexion/tim5690/devicetree.cb +++ /dev/null @@ -1,113 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "1" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "0" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex - diff --git a/src/mainboard/technexion/tim5690/dsdt.asl b/src/mainboard/technexion/tim5690/dsdt.asl deleted file mode 100644 index 7cc37da..0000000 --- a/src/mainboard/technexion/tim5690/dsdt.asl +++ /dev/null @@ -1,1792 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "TECHNEXION", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - //Method(_L03) { - // /* DBGO("\_GPE\_L00\n") */ - // Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - //} - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - //Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/technexion/tim5690/fadt.c b/src/mainboard/technexion/tim5690/fadt.c deleted file mode 100644 index c238cbe..0000000 --- a/src/mainboard/technexion/tim5690/fadt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb acpi */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in _PR.CPU0, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/technexion/tim5690/get_bus_conf.c b/src/mainboard/technexion/tim5690/get_bus_conf.c deleted file mode 100644 index 084e2b1..0000000 --- a/src/mainboard/technexion/tim5690/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/technexion/tim5690/irq_tables.c b/src/mainboard/technexion/tim5690/irq_tables.c deleted file mode 100644 index d1342ee..0000000 --- a/src/mainboard/technexion/tim5690/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c deleted file mode 100644 index 3423e51..0000000 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> -#include <superio/ite/it8712f/it8712f.h> -#include "tn_post_code.h" -#include "vgabios.h" - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - - -/* Video BIOS Function Extensions Specification - */ -//Callback Sub-Function 00h - Get LCD Panel ID -#define LCD_PANEL_ID_NO 0x00 /* No LCD */ -#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */ -#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */ -#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */ -#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */ -#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */ -#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */ -//Callback Sub-Function 05h – Select Boot-up TV Standard -#define TV_MODE_00 0x00 /* NTSC */ -#define TV_MODE_01 0x01 /* PAL */ -#define TV_MODE_02 0x02 /* PALM */ -#define TV_MODE_03 0x03 /* PAL60 */ -#define TV_MODE_04 0x04 /* NTSCJ */ -#define TV_MODE_05 0x05 /* PALCN */ -#define TV_MODE_06 0x06 /* PALN */ -#define TV_MODE_09 0x09 /* SCART-RGB */ -#define TV_MODE_NO 0xff /* No TV Support */ - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA SIO_BASE+1 - -/* Global configuration registers. */ -#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ -#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ -#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */ -#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ - -#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */ -#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */ - -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - -/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the - LDN the register belongs to, before you can access the register. */ -static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) -{ - outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8712f_enter_conf(void) -{ - /* Enter the configuration state (MB PnP mode). */ - - /* Perform MB PnP setup to put the SIO chip at 0x2e. */ - /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ - /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ - outb(0x87, IT8712F_CONFIGURATION_PORT); - outb(0x01, IT8712F_CONFIGURATION_PORT); - outb(0x55, IT8712F_CONFIGURATION_PORT); - outb(0x55, IT8712F_CONFIGURATION_PORT); -} - -static void it8712f_exit_conf(void) -{ - /* Exit the configuration state (MB PnP mode). */ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); -} - -/* set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/* Mainboard specific GPIO setup. */ -static void mb_gpio_init(u16 *iobase) -{ - /* Init Super I/O GPIOs. */ - it8712f_enter_conf(); - outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX); - outb(IT8712F_GPIO, SIO_DATA); - outb(0x62, SIO_INDEX); - outb((*iobase >> 8), SIO_DATA); - outb(0x63, SIO_INDEX); - outb((*iobase & 0xff), SIO_DATA); - it8712f_exit_conf(); -} - -#if CONFIG_VGA_ROM_RUN -/* The LCD's panel id seletion. */ -static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) -{ - switch (num_id) { - case 0x1: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01; - break; - case 0x2: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02; - break; - case 0x3: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03; - break; - case 0x4: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04; - break; - case 0x5: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05; - break; - case 0x6: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06; - break; - default: - vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO; - break; - } -} -#endif - -/************************************************* -* enable the dedicated function in tim5690 board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - u16 gpio_base = IT8712F_SIMPLE_IO_BASE; -#if CONFIG_VGA_ROM_RUN - rs690_vbios_regs vbios_regs; - u8 port2; -#endif - - printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev); - - mb_gpio_init(&gpio_base); - -#if CONFIG_VGA_ROM_RUN - /* The LCD's panel id seletion by switch. */ - port2 = inb(gpio_base+1); - lcd_panel_id(&vbios_regs, ((~port2) & 0xf)); - - /* No support TV */ - vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; - vgabios_init(&vbios_regs); -#endif - - set_thermal_config(); -} - -void mainboard_post(u8 value) -{ - switch (value) { - case POST_ENTER_ELF_BOOT: - technexion_post_code(LED_MESSAGE_FINISH); - break; - } -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c deleted file mode 100644 index 8b86b02..0000000 --- a/src/mainboard/technexion/tim5690/mptable.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/technexion/tim5690/resourcemap.c b/src/mainboard/technexion/tim5690/resourcemap.c deleted file mode 100644 index 0b80b70..0000000 --- a/src/mainboard/technexion/tim5690/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_tim5690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c deleted file mode 100644 index 68373b9..0000000 --- a/src/mainboard/technexion/tim5690/romstage.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <spd.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "tn_post_code.c" -#include "speaker.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - technexion_post_code_init(); - technexion_post_code(LED_MESSAGE_START); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_tim5690_resource_map(); - - setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - speaker_init(255); - speaker_on_nodelay(); - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - technexion_post_code(LED_MESSAGE_RAM); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - speaker_off_nodelay(); - - rs690_before_pci_init(); - sb600_before_pci_init(); - - post_cache_as_ram(); -} diff --git a/src/mainboard/technexion/tim5690/speaker.c b/src/mainboard/technexion/tim5690/speaker.c deleted file mode 100644 index e4d2a87..0000000 --- a/src/mainboard/technexion/tim5690/speaker.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifdef __PRE_RAM__ - -#include <arch/cpu.h> -#include "southbridge/amd/sb600/sb600.h" - -#else - -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/amd/sb600/sb600.h" -#include <delay.h> - -#endif /* __PRE_RAM__ */ - -#include "speaker.h" - -void speaker_init(uint8_t time) { - /* SB600 RRG. - * Options_0 - RW - 8 bits - [PM_Reg: 60h]. - * SpkrEn, bit[5]=1b, Setting this bit will configure GPIO2 to be speaker output. - */ -#ifdef __PRE_RAM__ - pmio_write(0x60, (pmio_read(0x60) | (1<<5))); -#else - pm_iowrite(0x60, (pm_ioread(0x60) | (1<<5))); -#endif /* __PRE_RAM__ */ - - /* SB600 RRG. - * Tmr1CntrlWord - RW - 8 bits - [IO_Reg: 43h]. - * ModeSelect, bit[3:1]=011b, Square wave output. - * CmmandSelect, bit[5:4]=11b, Read/write least, and then most significant byte. - * CounterSelect, bit[7:6]=10b, Select counter 2. - */ - outb(0xb6, 0x43); - - - /* SB600 RRG. - * TimerCh2- RW - 8 bits - [IO_Reg: 42h]. - */ - outb(time, 0x42); -} - -void speaker_on_nodelay(void) { - /* SB600 RRG. - * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. - * SpkrEnable, bit[0]=1b, Enable counter 2 - * SpkrTmrEnable, bit[1]=1b, Speaker timer on - */ - outb(inb(0x61) | 0x03, 0x61); -} - -void speaker_on_delay(void) { - speaker_on_nodelay(); - mdelay(100); -} - -void speaker_off_nodelay(void) { - /* SB600 RRG. - * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. - * SpkrEnable, bit[0]=0b, Disable counter 2 - * SpkrTmrEnable, bit[1]=0b, Speaker timer off - */ - outb(inb(0x61) & ~0x03, 0x61); -} - -void speaker_off_delay(void) { - speaker_off_nodelay(); - mdelay(100); -} diff --git a/src/mainboard/technexion/tim5690/speaker.h b/src/mainboard/technexion/tim5690/speaker.h deleted file mode 100644 index e4a5fd0..0000000 --- a/src/mainboard/technexion/tim5690/speaker.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -void speaker_init(uint8_t time); -void speaker_on_nodelay(void); -void speaker_off_nodelay(void); -void speaker_on_delay(void); -void speaker_off_delay(void); diff --git a/src/mainboard/technexion/tim5690/tn_post_code.c b/src/mainboard/technexion/tim5690/tn_post_code.c deleted file mode 100644 index 422627e..0000000 --- a/src/mainboard/technexion/tim5690/tn_post_code.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifdef __PRE_RAM__ - -#include <arch/cpu.h> -#include "southbridge/amd/sb600/sb600.h" - -#else - -#include <device/pci.h> -#include <device/pci_ids.h> - -#endif - -#include "tn_post_code.h" - - -#ifdef __PRE_RAM__ - -// TechNexion's Post Code Initially. -void technexion_post_code_init(void) -{ - uint8_t reg8_data; - device_t dev=0; - - // SMBus Module and ACPI Block (Device 20, Function 0) - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); - - // LED[bit0]:GPIO0 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x60); - reg8_data |= (1<<7); // 1: GPIO if not used by SATA - pmio_write(0x60, reg8_data); - - reg8_data = pci_read_config8(dev, 0x80); - reg8_data = ((reg8_data | (1<<0)) & ~(1<<4)); - pci_write_config8(dev, 0x80, reg8_data); - - // LED[bit1]:GPIO1 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0x80); - reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); - pci_write_config8(dev, 0x80, reg8_data); - - // LED[bit2]:GPIO4 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x5e); - reg8_data &= ~(1<<7); // 0: GPIO if not used by SATA - pmio_write(0x5e, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1<<0); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1<<0); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit3]:GPIO6 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x60); - reg8_data |= (1<<7); // 1: GPIO if not used by SATA - pmio_write(0x60, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1<<2); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1<<2); - pci_write_config8(dev, 0xa9, reg8_data); - // LED[bit4]:GPIO7 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1<<3); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1<<3); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit5]:GPIO8 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xa8); - reg8_data |= (1<<4); - pci_write_config8(dev, 0xa8, reg8_data); - - reg8_data = pci_read_config8(dev, 0xa9); - reg8_data &= ~(1<<4); - pci_write_config8(dev, 0xa9, reg8_data); - - // LED[bit6]:GPIO10 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pci_read_config8(dev, 0xab); - reg8_data = ((reg8_data | (1<<0)) & ~(1<<1)); - pci_write_config8(dev, 0xab, reg8_data); - - // LED[bit7]:GPIO66 - // This is reference SB600 RRG 4.1.1 GPIO - reg8_data = pmio_read(0x68); - reg8_data &= ~(1<<5); // 0: GPIO - pmio_write(0x68, reg8_data); - - reg8_data = pci_read_config8(dev, 0x7e); - reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); - pci_write_config8(dev, 0x7e, reg8_data); - -} - -#endif - -/* TechNexion's Post Code. - */ -void technexion_post_code(uint8_t udata8) -{ - uint8_t u8_data; - device_t dev=0; - - // SMBus Module and ACPI Block (Device 20, Function 0) -#ifdef __PRE_RAM__ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); -#else - dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); -#endif - - udata8 = ~(udata8); - - // LED[bit0]:GPIO0 - u8_data = pci_read_config8(dev, 0x80); - if (udata8 & 0x1) { - u8_data |= (1<<0); - } - else { - u8_data &= ~(1<<0); - } - pci_write_config8(dev, 0x80, u8_data); - - // LED[bit1]:GPIO1 - u8_data = pci_read_config8(dev, 0x80); - if (udata8 & 0x2) { - u8_data |= (1<<1); - } - else { - u8_data &= ~(1<<1); - } - pci_write_config8(dev, 0x80, u8_data); - - // LED[bit2]:GPIO4 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x4) { - u8_data |= (1<<0); - } - else { - u8_data &= ~(1<<0); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit3]:GPIO6 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x8) { - u8_data |= (1<<2); - } - else { - u8_data &= ~(1<<2); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit4]:GPIO7 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x10) { - u8_data |= (1<<3); - } - else { - u8_data &= ~(1<<3); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit5]:GPIO8 - u8_data = pci_read_config8(dev, 0xa8); - if (udata8 & 0x20) { - u8_data |= (1<<4); - } - else { - u8_data &= ~(1<<4); - } - pci_write_config8(dev, 0xa8, u8_data); - - // LED[bit6]:GPIO10 - u8_data = pci_read_config8(dev, 0xab); - if (udata8 & 0x40) { - u8_data |= (1<<0); - } - else { - u8_data &= ~(1<<0); - } - pci_write_config8(dev, 0xab, u8_data); - - // LED[bit7]:GPIO66 - u8_data = pci_read_config8(dev, 0x7e); - if (udata8 & 0x80) { - u8_data |= (1<<1); - } - else { - u8_data &= ~(1<<1); - } - pci_write_config8(dev, 0x7e, u8_data); - -} diff --git a/src/mainboard/technexion/tim5690/tn_post_code.h b/src/mainboard/technexion/tim5690/tn_post_code.h deleted file mode 100644 index 46d7382..0000000 --- a/src/mainboard/technexion/tim5690/tn_post_code.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define LED_MESSAGE_START 0xFF -#define LED_MESSAGE_FINISH 0x99 -#define LED_MESSAGE_RAM 0x01 - - -#ifdef __PRE_RAM__ - -// TechNexion's Post Code Initially. -void technexion_post_code_init(void); - -#endif - -void technexion_post_code(uint8_t udata8); diff --git a/src/mainboard/technexion/tim5690/vgabios.c b/src/mainboard/technexion/tim5690/vgabios.c deleted file mode 100644 index 3d09a86..0000000 --- a/src/mainboard/technexion/tim5690/vgabios.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/interrupt.h> -#include "vgabios.h" -#include <x86emu/regs.h> - - -int tim5690_int15_handler(void); - -static rs690_vbios_regs vbios_regs_local; - -/* Initialization interrupt function */ -static void vbios_fun_init(rs690_vbios_regs *vbios_regs) -{ - vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id; - vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard; -} - -/* BIOS int15 function */ -int tim5690_int15_handler(void) -{ - int res = 0; - - printk(BIOS_DEBUG, "tim5690_int15_handler\n"); - - switch (X86_EAX & 0xffff) { - case AMD_RS690_INT15: - switch (X86_EBX & 0xff) { - case 0x00: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id; - res = 1; - break; - case 0x05: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard; - res = 1; - break; - } - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", - X86_EAX & 0xffff); - break; - } - - return res; -} - -/* Initialization VBIOS function */ -void vgabios_init(rs690_vbios_regs *vbios_regs) -{ - printk(BIOS_DEBUG, "vgabios_init\n"); - - mainboard_interrupt_handlers(0x15, &tim5690_int15_handler); - vbios_fun_init(vbios_regs); -} diff --git a/src/mainboard/technexion/tim5690/vgabios.h b/src/mainboard/technexion/tim5690/vgabios.h deleted file mode 100644 index a353011..0000000 --- a/src/mainboard/technexion/tim5690/vgabios.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li libra.li@technexion.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* AMD Chipset */ -#define AMD_RS690_INT15 0x4E08 - -typedef struct __rs690_int15_regs__ -{ - u8 fun00_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID - u8 fun05_tv_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard -}rs690_int15_regs; - -typedef struct __rs690_vbios_regs__ -{ - rs690_int15_regs int15_regs; -}rs690_vbios_regs; - -/* Initialization VBIOS function */ -extern void vgabios_init(rs690_vbios_regs *vbios_regs); diff --git a/src/mainboard/technexion/tim8690/Kconfig b/src/mainboard/technexion/tim8690/Kconfig deleted file mode 100644 index 4e0b25a..0000000 --- a/src/mainboard/technexion/tim8690/Kconfig +++ /dev/null @@ -1,55 +0,0 @@ -if BOARD_TECHNEXION_TIM8690 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default technexion/tim8690 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "TIM-8690" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config SB_HT_CHAIN_ON_BUS0 - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_TECHNEXION_TIM8690 diff --git a/src/mainboard/technexion/tim8690/acpi/ide.asl b/src/mainboard/technexion/tim8690/acpi/ide.asl deleted file mode 100644 index 7cee00d..0000000 --- a/src/mainboard/technexion/tim8690/acpi/ide.asl +++ /dev/null @@ -1,244 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(ICRG, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* Primary PIO Slave Timing */ - PPTM, 8, /* Primary PIO Master Timing */ - OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ - PMTM, 8, /* Primary MWDMA Master Timing */ - OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRID) -{ - Name (_ADR, Zero) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLAV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/technexion/tim8690/acpi/routing.asl b/src/mainboard/technexion/tim8690/acpi/routing.asl deleted file mode 100644 index 8f7419a..0000000 --- a/src/mainboard/technexion/tim8690/acpi/routing.asl +++ /dev/null @@ -1,258 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, INTC, 0 }, - Package(){0x0002FFFF, 1, INTD, 0 }, - Package(){0x0002FFFF, 2, INTA, 0 }, - Package(){0x0002FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, INTA, 0 }, - Package(){0x0004FFFF, 1, INTB, 0 }, - Package(){0x0004FFFF, 2, INTC, 0 }, - Package(){0x0004FFFF, 3, INTD, 0 }, - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - /* Package(){0x0005FFFF, 0, INTB, 0 }, */ - /* Package(){0x0005FFFF, 1, INTC, 0 }, */ - /* Package(){0x0005FFFF, 2, INTD, 0 }, */ - /* Package(){0x0005FFFF, 3, INTA, 0 }, */ - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - Package(){0x0006FFFF, 0, INTC, 0 }, - Package(){0x0006FFFF, 1, INTD, 0 }, - Package(){0x0006FFFF, 2, INTA, 0 }, - Package(){0x0006FFFF, 3, INTB, 0 }, - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - Package(){0x0007FFFF, 0, INTD, 0 }, - Package(){0x0007FFFF, 1, INTA, 0 }, - Package(){0x0007FFFF, 2, INTB, 0 }, - Package(){0x0007FFFF, 3, INTC, 0 }, - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, INTA, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, INTA, 0 }, - Package(){0x0013FFFF, 1, INTB, 0 }, - Package(){0x0013FFFF, 2, INTC, 0 }, - Package(){0x0013FFFF, 3, INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - - /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ - /* Package(){0x0001FFFF, 0, 0, 18 }, */ - /* Package(){0x0001FFFF, 1, 0, 19 }, */ - - /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ - Package(){0x0002FFFF, 0, 0, 18 }, - /* Package(){0x0002FFFF, 1, 0, 19 }, */ - /* Package(){0x0002FFFF, 2, 0, 16 }, */ - /* Package(){0x0002FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - Package(){0x0003FFFF, 0, 0, 19 }, - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package(){0x0004FFFF, 0, 0, 16 }, - /* Package(){0x0004FFFF, 1, 0, 17 }, */ - /* Package(){0x0004FFFF, 2, 0, 18 }, */ - /* Package(){0x0004FFFF, 3, 0, 19 }, */ - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - Package(){0x0005FFFF, 0, 0, 17 }, - /* Package(){0x0005FFFF, 1, 0, 18 }, */ - /* Package(){0x0005FFFF, 2, 0, 19 }, */ - /* Package(){0x0005FFFF, 3, 0, 16 }, */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - Package(){0x0006FFFF, 0, 0, 18 }, - /* Package(){0x0006FFFF, 1, 0, 19 }, */ - /* Package(){0x0006FFFF, 2, 0, 16 }, */ - /* Package(){0x0006FFFF, 3, 0, 17 }, */ - - /* Bus 0, Dev 7 - PCIe Bridge for network card */ - Package(){0x0007FFFF, 0, 0, 19 }, - /* Package(){0x0007FFFF, 1, 0, 16 }, */ - /* Package(){0x0007FFFF, 2, 0, 17 }, */ - /* Package(){0x0007FFFF, 3, 0, 18 }, */ - - /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller #2 */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - /* Package(){0x00130004, 2, 0, 18 }, */ - /* Package(){0x00130005, 3, 0, 19 }, */ - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - /* Package(){0x00140004, 2, 0, 18 }, */ - /* Package(){0x00140004, 3, 0, 19 }, */ - /* Package(){0x00140005, 1, 0, 17 }, */ - /* Package(){0x00140006, 1, 0, 17 }, */ - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, INTA, 0 }, - Package(){0x0005FFFF, 1, INTB, 0 }, - Package(){0x0005FFFF, 2, INTC, 0 }, - Package(){0x0005FFFF, 3, INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - /* Package(){0x0005FFFF, 2, 0, 20 }, */ - /* Package(){0x0005FFFF, 3, 0, 17 }, */ - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, INTC, 0 }, - Package(){0x0000FFFF, 1, INTD, 0 }, - Package(){0x0000FFFF, 2, INTA, 0 }, - Package(){0x0000FFFF, 3, INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - - Name(APS7, Package(){ - /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 0x14 }, - Package(){0x0005FFFF, 1, 0, 0x15 }, - Package(){0x0005FFFF, 2, 0, 0x16 }, - Package(){0x0005FFFF, 3, 0, 0x17 }, - Package(){0x0006FFFF, 0, 0, 0x15 }, - Package(){0x0006FFFF, 1, 0, 0x16 }, - Package(){0x0006FFFF, 2, 0, 0x17 }, - Package(){0x0006FFFF, 3, 0, 0x14 }, - Package(){0x0007FFFF, 0, 0, 0x16 }, - Package(){0x0007FFFF, 1, 0, 0x17 }, - Package(){0x0007FFFF, 2, 0, 0x14 }, - Package(){0x0007FFFF, 3, 0, 0x15 }, - }) -} diff --git a/src/mainboard/technexion/tim8690/acpi/sata.asl b/src/mainboard/technexion/tim8690/acpi/sata.asl deleted file mode 100644 index 1fadf40..0000000 --- a/src/mainboard/technexion/tim8690/acpi/sata.asl +++ /dev/null @@ -1,149 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - _GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (_SB.P0PR) { - if (LGreater(_SB.P0IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P0PR) - } - - if (_SB.P1PR) { - if (LGreater(_SB.P1IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P1PR) - } - - if (_SB.P2PR) { - if (LGreater(_SB.P2IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P2PR) - } - - if (_SB.P3PR) { - if (LGreater(_SB.P3IS,0)) { - sleep(32) - } - Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, _SB.P3PR) - } - } -} diff --git a/src/mainboard/technexion/tim8690/acpi/usb.asl b/src/mainboard/technexion/tim8690/acpi/usb.asl deleted file mode 100644 index 8425002..0000000 --- a/src/mainboard/technexion/tim8690/acpi/usb.asl +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, _SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, _SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, _SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, _SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, _SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, _SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, _SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, _SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, _SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/technexion/tim8690/acpi_tables.c b/src/mainboard/technexion/tim8690/acpi_tables.c deleted file mode 100644 index a3b35d5..0000000 --- a/src/mainboard/technexion/tim8690/acpi_tables.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "northbridge/amd/amdk8/acpi.h" -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - get_bus_conf(); - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, 0xF); - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/technexion/tim8690/board_info.txt b/src/mainboard/technexion/tim8690/board_info.txt deleted file mode 100644 index dbda07e..0000000 --- a/src/mainboard/technexion/tim8690/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.technexion.com/index.php/tim-8690 diff --git a/src/mainboard/technexion/tim8690/cmos.layout b/src/mainboard/technexion/tim8690/cmos.layout deleted file mode 100644 index d118897..0000000 --- a/src/mainboard/technexion/tim8690/cmos.layout +++ /dev/null @@ -1,117 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -## -## - -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/technexion/tim8690/devicetree.cb b/src/mainboard/technexion/tim8690/devicetree.cb deleted file mode 100644 index ff14075..0000000 --- a/src/mainboard/technexion/tim8690/devicetree.cb +++ /dev/null @@ -1,116 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x3050 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on end # Internal Graphics 0x791F - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex - diff --git a/src/mainboard/technexion/tim8690/dsdt.asl b/src/mainboard/technexion/tim8690/dsdt.asl deleted file mode 100644 index 0968a83..0000000 --- a/src/mainboard/technexion/tim8690/dsdt.asl +++ /dev/null @@ -1,1792 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "TECHNEXION", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - - Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - Scope(_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(_SB) { - - Method(OSFL, 0){ - - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - - if(CondRefOf(_OSI,Local1)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - _SB.CIRQ() - } - Store(Arg0, PMOD) - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKA\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKA\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKA\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKB\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKB\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKB\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKC\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKC\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKC\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKD\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKD\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKD\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKE\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKE\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKE\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKF\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKF\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKF\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKG\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKG\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKG\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\_SB\LNKH\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\_SB\LNKH\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\_SB\LNKH\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - - /* Supported sleep states: */ - Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ - - If (LAnd(SSFG, 0x01)) { - Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ - } - If (LAnd(SSFG, 0x02)) { - Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ - } - If (LAnd(SSFG, 0x04)) { - Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ - } - If (LAnd(SSFG, 0x08)) { - Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ - } - - Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ - - Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ - Name(CSMS, 0) /* Current System State */ - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * _PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(_PTS, 1) { - /* DBGO("\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(_SB.SBRI, 0x13)) { - * Store(0,_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - _SB.PCI0.SIOS (Arg0) - } /* End Method(_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * _GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(_GTS, 1) { - * DBGO("\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * _BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(_BFS, 1) { - /* DBGO("\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * _WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(_WAK, 1) { - /* DBGO("\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - _SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(_WAK) */ - - Scope(_GPE) { /* Start Scope GPE */ - /* General event 0 */ - /* Method(_L00) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 1 */ - /* Method(_L01) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 2 */ - /* Method(_L02) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 3 */ - Method(_L03) { - /* DBGO("\_GPE\_L00\n") */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - /* Method(_L04) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 5 */ - /* Method(_L05) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 6 - Used for GPM6, moved to USB.asl */ - /* Method(_L06) { - * DBGO("\_GPE\_L00\n") - * } - */ - - /* General event 7 - Used for GPM7, moved to USB.asl */ - /* Method(_L07) { - * DBGO("\_GPE\_L07\n") - * } - */ - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\_GPE\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\_GPE\_L09\n") */ - Notify (_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\_GPE\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\_GPE\_L0B\n") */ - Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\_GPE\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\_GPE\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\_GPE\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\_GPE\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\_GPE\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\_GPE\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\_GPE\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\_GPE\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\_GPE\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\_GPE\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\_GPE\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\_GPE\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\_GPE\_L18\n") */ - Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\_GPE\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\_GPE\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\_GPE\_L1B\n") */ - Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\_GPE\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\_GPE\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\_GPE\_L1E\n") - * } - */ - - /* SATA SCI event - Moved to sata.asl */ - /* Method(_L1F) { - * DBGO("\_GPE\_L1F\n") - * } - */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* South Bridge */ - Scope(_SB) { /* Start _SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\_SB\PCI0\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - Return (APR1) - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge, not used in Herring */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - - /* PCI slot 1, 2, 3 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {0x18, 4}) - - Method(_PRT, 0) { - Return (PCIB) - } - } - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00120000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPTM) { - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0) { - CreateDwordField(CRS, ^HPT._BAS, HPBA) - Store(HPBA, HPBA) - Return(CRS) - } - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ - - /* BIOS space just below 4GB */ - DWORDMemory( - ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PCBM - ) - - /* DRAM memory from 4GB to TopMem2 */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - DMHI - ) - - /* BIOS space just below 16EB */ - QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, /* Granularity */ - 0x00000000, /* Min */ - 0x00000000, /* Max */ - 0x00000000, /* Translation */ - 0x00000001, /* Max-Min, RLEN */ - ,, - PEBM - ) - - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - /* DBGO("\_SB\PCI0\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - CreateDWordField(CRES, ^DMLO._BAS, DMLB) - CreateDWordField(CRES, ^DMLO._LEN, DMLL) - CreateDWordField(CRES, ^PCBM._MIN, PBMB) - CreateDWordField(CRES, ^PCBM._LEN, PBML) - - CreateQWordField(CRES, ^DMHI._MIN, DMHB) - CreateQWordField(CRES, ^DMHI._LEN, DMHL) - CreateQWordField(CRES, ^PEBM._MIN, EBMB) - CreateQWordField(CRES, ^PEBM._LEN, EBML) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - /* Set size of memory from 1MB to TopMem */ - Subtract(TOM1, 0x100000, DMLL) - - /* - * If(LNotEqual(TOM2, 0x00000000)){ - * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 - * ShiftLeft(TOM2, 20, Local0) - * Subtract(Local0, 0x100000000, DMHL) - * } - */ - - /* If there is no memory above 4GB, put the BIOS just below 4GB */ - If(LEqual(TOM2, 0x00000000)){ - Store(PBAD,PBMB) /* Reserve the "BIOS" space */ - Store(PBLN,PBML) - } - Else { /* Otherwise, put the BIOS just below 16EB */ - ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ - Store(PBLN,EBML) - } - - Return(CRES) /* note to change the Name buffer */ - } /* end of Method(_SB.PCI0._CRS) */ - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\_SB\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \_OS=") */ - /* DBGO(_OS) */ - /* DBGO("\n \_REV=") */ - /* DBGO(_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - * } - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End _SB scope */ - - Scope(_SI) { - Method(_SST, 1) { - /* DBGO("\_SI\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - Mutex (SBX0, 0x00) - OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) - Field (SMB0, ByteAcc, NoLock, Preserve) { - HSTS, 8, /* SMBUS status */ - SSTS, 8, /* SMBUS slave status */ - HCNT, 8, /* SMBUS control */ - HCMD, 8, /* SMBUS host cmd */ - HADD, 8, /* SMBUS address */ - DAT0, 8, /* SMBUS data0 */ - DAT1, 8, /* SMBUS data1 */ - BLKD, 8, /* SMBUS block data */ - SCNT, 8, /* SMBUS slave control */ - SCMD, 8, /* SMBUS shadow cmd */ - SEVT, 8, /* SMBUS slave event */ - SDAT, 8 /* SMBUS slave data */ - } - - Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ - Store (0x1E, HSTS) - Store (0xFA, Local0) - While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { - Stall (0x64) - Decrement (Local0) - } - - Return (Local0) - } - - Method (SWTC, 1, NotSerialized) { - Store (Arg0, Local0) - Store (0x07, Local2) - Store (One, Local1) - While (LEqual (Local1, One)) { - Store (And (HSTS, 0x1E), Local3) - If (LNotEqual (Local3, Zero)) { /* read sucess */ - If (LEqual (Local3, 0x02)) { - Store (Zero, Local2) - } - - Store (Zero, Local1) - } - Else { - If (LLess (Local0, 0x0A)) { /* read failure */ - Store (0x10, Local2) - Store (Zero, Local1) - } - Else { - Sleep (0x0A) /* 10 ms, try again */ - Subtract (Local0, 0x0A, Local0) - } - } - } - - Return (Local2) - } - - Method (SMBR, 3, NotSerialized) { - Store (0x07, Local0) - If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { - Store (WCLR (), Local0) /* clear SMBUS status register before read data */ - If (LEqual (Local0, Zero)) { - Release (SBX0) - Return (0x0) - } - - Store (0x1F, HSTS) - Store (Or (ShiftLeft (Arg1, One), One), HADD) - Store (Arg2, HCMD) - If (LEqual (Arg0, 0x07)) { - Store (0x48, HCNT) /* read byte */ - } - - Store (SWTC (0x03E8), Local1) /* 1000 ms */ - If (LEqual (Local1, Zero)) { - If (LEqual (Arg0, 0x07)) { - Store (DAT0, Local0) - } - } - Else { - Store (Local1, Local0) - } - - Release (SBX0) - } - - /* DBGO("the value of SMBusData0 register ") */ - /* DBGO(Arg2) */ - /* DBGO(" is ") */ - /* DBGO(Local0) */ - /* DBGO("\n") */ - - Return (Local0) - } - - /* THERMAL */ - Scope(_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\_TZ\TZ00\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\_TZ\TZ00\_AL0\n") */ - Return(Package() {_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\_TZ\TZ00\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/technexion/tim8690/fadt.c b/src/mainboard/technexion/tim8690/fadt.c deleted file mode 100644 index c238cbe..0000000 --- a/src/mainboard/technexion/tim8690/fadt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "southbridge/amd/sb600/sb600.h" - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb acpi */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in _PR.CPU0, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/technexion/tim8690/get_bus_conf.c b/src/mainboard/technexion/tim8690/get_bus_conf.c deleted file mode 100644 index 084e2b1..0000000 --- a/src/mainboard/technexion/tim8690/get_bus_conf.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#if CONFIG_LOGICAL_CPUS -#include <cpu/amd/multicore.h> -#endif - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - device_t dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/technexion/tim8690/irq_tables.c b/src/mainboard/technexion/tim8690/irq_tables.c deleted file mode 100644 index d1342ee..0000000 --- a/src/mainboard/technexion/tim8690/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - - - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c deleted file mode 100644 index 6010eb1..0000000 --- a/src/mainboard/technexion/tim8690/mainboard.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <southbridge/amd/sb600/sb600.h> - -#define ADT7461_ADDRESS 0x4C -#define ARA_ADDRESS 0x0C /* Alert Response Address */ -#define SMBUS_IO_BASE 0x1000 - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, - u8 val); -#define ADT7461_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) -#define ARA_read_byte(address) \ - do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) -#define ADT7461_write_byte(address, val) \ - do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) - - - - -/*************************************************** -* This board, the TIM-8690 has two Marvel 88e5056 PCI-E -* 10/100/1000 chips on board. -* Both of their pin PERSTn pins are connected to GPIO 5 of the -* SB600 southbridge. -****************************************************/ -static void enable_onboard_nic(void) -{ - - u8 byte; - device_t sm_dev; - - printk(BIOS_INFO, "enable_onboard_nic.\n"); - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0x9a); - byte |= ( 1 << 7); - pci_write_config8(sm_dev, 0x9a, byte); - - byte=pm_ioread(0x59); - byte &= ~( 1<< 5); - pm_iowrite(0x59,byte); - - byte = pci_read_config8(sm_dev, 0xA8); - - byte |= (1 << 1); //set bit 1 to high - pci_write_config8(sm_dev, 0xA8, byte); -} - -/* set thermal config - */ -static void set_thermal_config(void) -{ - u8 byte; - u16 word; - device_t sm_dev; - - /* set ADT 7461 */ - ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ - ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ - ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ - ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ - - ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ - ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ - - byte = ADT7461_read_byte(0x02); /* read status register to clear it */ - ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); - - /* sb600 settings for thermal config */ - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to input */ - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* THERMTRIP pin */ - /* byte = pm_ioread(0x68); - * byte |= 1 << 3; - * pm_iowrite(0x68, byte); - * - * byte = pm_ioread(0x55); - * byte |= 1 << 0; - * pm_iowrite(0x55, byte); - * - * byte = pm_ioread(0x67); - * byte &= ~( 1 << 6); - * pm_iowrite(0x67, byte); - */ -} - -/************************************************* -* enable the dedicated function in tim8690 board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); - - enable_onboard_nic(); - set_thermal_config(); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c deleted file mode 100644 index 8b86b02..0000000 --- a/src/mainboard/technexion/tim8690/mptable.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - device_t dev; - u32 dword; - u8 byte; - - dev = - dev_find_slot(bus_sb600[0], - PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - dword = pci_read_config32(dev, 0x74) & 0xfffffff0; - smp_write_ioapic(mc, apicid_sb600, 0x11, dword); - - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - - /* SATA */ - dword = pci_read_config32(dev, 0xac); - dword &= ~(7 << 26); - dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ - /* dword |= 1<<22; PIC and APIC co exists */ - pci_write_config32(dev, 0xac, dword); - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - } - } - -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/technexion/tim8690/resourcemap.c b/src/mainboard/technexion/tim8690/resourcemap.c deleted file mode 100644 index 05cbd63..0000000 --- a/src/mainboard/technexion/tim8690/resourcemap.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -static void setup_tim8690_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c deleted file mode 100644 index 0ba0fce..0000000 --- a/src/mainboard/technexion/tim8690/romstage.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "northbridge/amd/amdk8/raminit.h" -#include "lib/delay.c" -#include <spd.h> -#include "cpu/x86/lapic.h" -#include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include "cpu/x86/bist.h" -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -static void memreset(int controllers, const struct mem_controller *ctrl) { } -static void activate_spd_rom(const struct mem_controller *ctrl) { } - -static inline int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/amdk8.h" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit_f.c" -#include "northbridge/amd/amdk8/coherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs690_dev8(); - sb600_lpc_init(); - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_tim8690_resource_map(); - - setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6 ) { - /* Read FIDVID_STATUS */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr=rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - rs690_before_pci_init(); - sb600_before_pci_init(); - - post_cache_as_ram(); -} diff --git a/src/mainboard/technexion/tim_5690/Kconfig b/src/mainboard/technexion/tim_5690/Kconfig new file mode 100644 index 0000000..544836d --- /dev/null +++ b/src/mainboard/technexion/tim_5690/Kconfig @@ -0,0 +1,60 @@ +if BOARD_TECHNEXION_TIM_5690 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_S1G1 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_RS690 + select SOUTHBRIDGE_AMD_SB600 + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select HAVE_ACPI_TABLES + select GFXUMA + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default technexion/tim_5690 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "TIM-5690" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +config HEAP_SIZE + hex + default 0x4000 + +endif # BOARD_TECHNEXION_TIM_5690 diff --git a/src/mainboard/technexion/tim_5690/Makefile.inc b/src/mainboard/technexion/tim_5690/Makefile.inc new file mode 100644 index 0000000..878dbab --- /dev/null +++ b/src/mainboard/technexion/tim_5690/Makefile.inc @@ -0,0 +1,26 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# Needed by irq_tables and mptable and acpi_tables. + +# This is debug message for products of Technexion. +ramstage-y += tn_post_code.c + +ramstage-y += speaker.c +ramstage-$(CONFIG_VGA_ROM_RUN) += vgabios.c diff --git a/src/mainboard/technexion/tim_5690/acpi/ide.asl b/src/mainboard/technexion/tim_5690/acpi/ide.asl new file mode 100644 index 0000000..7cee00d --- /dev/null +++ b/src/mainboard/technexion/tim_5690/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/technexion/tim_5690/acpi/routing.asl b/src/mainboard/technexion/tim_5690/acpi/routing.asl new file mode 100644 index 0000000..8f7419a --- /dev/null +++ b/src/mainboard/technexion/tim_5690/acpi/routing.asl @@ -0,0 +1,258 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 2, INTC, 0 }, + Package(){0x0013FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, 0, 16 }, + Package(){0x0013FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 2, 0, 18 }, + Package(){0x0013FFFF, 3, 0, 19 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/technexion/tim_5690/acpi/sata.asl b/src/mainboard/technexion/tim_5690/acpi/sata.asl new file mode 100644 index 0000000..1fadf40 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/technexion/tim_5690/acpi/usb.asl b/src/mainboard/technexion/tim_5690/acpi/usb.asl new file mode 100644 index 0000000..dea57cf --- /dev/null +++ b/src/mainboard/technexion/tim_5690/acpi/usb.asl @@ -0,0 +1,162 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +/* If (LLessEqual(UOM5,9)) { +* Scope (_GPE) { +* Method (_L1A) { +* UCOC() +* if (LEqual(GPB5,PLC5)) { +* Not(PLC5,PLC5) +* Store(PLC5, _SB.PT5D) +* } +* } +* } +* } +*/ + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/technexion/tim_5690/acpi_tables.c b/src/mainboard/technexion/tim_5690/acpi_tables.c new file mode 100644 index 0000000..a3b35d5 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/acpi_tables.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "northbridge/amd/amdk8/acpi.h" +#include <arch/cpu.h> +#include <cpu/amd/powernow.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + get_bus_conf(); + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB600 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/technexion/tim_5690/board_info.txt b/src/mainboard/technexion/tim_5690/board_info.txt new file mode 100644 index 0000000..c63907a --- /dev/null +++ b/src/mainboard/technexion/tim_5690/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.technexion.com/index.php/embedded-mainboards/amd/tim-5690 diff --git a/src/mainboard/technexion/tim_5690/cmos.layout b/src/mainboard/technexion/tim_5690/cmos.layout new file mode 100644 index 0000000..d118897 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/technexion/tim_5690/devicetree.cb b/src/mainboard/technexion/tim_5690/devicetree.cb new file mode 100644 index 0000000..23b9741 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/devicetree.cb @@ -0,0 +1,113 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_S1G1 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3050 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 5.0 on end # Internal Graphics 0x791F + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "1" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "0" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/technexion/tim_5690/dsdt.asl b/src/mainboard/technexion/tim_5690/dsdt.asl new file mode 100644 index 0000000..7cc37da --- /dev/null +++ b/src/mainboard/technexion/tim_5690/dsdt.asl @@ -0,0 +1,1792 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "TECHNEXION", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve) + { + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + + Method(CIRQ, 0x00, NotSerialized) + { + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + //Method(_L03) { + // /* DBGO("\_GPE\_L00\n") */ + // Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + //} + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00120000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE IT8712F Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the IT8712F MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* IT8712F magic number */ + } + /* Exit the IT8712F MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + + /* + * Keyboard PME is routed to SB600 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("IT8712F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + //Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/technexion/tim_5690/fadt.c b/src/mainboard/technexion/tim_5690/fadt.c new file mode 100644 index 0000000..c238cbe --- /dev/null +++ b/src/mainboard/technexion/tim_5690/fadt.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "southbridge/amd/sb600/sb600.h" + +/*extern*/ u16 pm_base = 0x800; +/* pm_base should be set in sb acpi */ +/* pm_base should be got from bar2 of rs690. Here I compact ACPI + * registers into 32 bytes limit. + * */ + +#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + pm_base &= 0xFFFF; + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); + pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); + pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); + pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in _PR.CPU0, 6 bytes */ + pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); + pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); + + pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ + pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ + + pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); + pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 20-2B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ + pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/technexion/tim_5690/get_bus_conf.c b/src/mainboard/technexion/tim_5690/get_bus_conf.c new file mode 100644 index 0000000..084e2b1 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs690[8]; +u8 bus_sb600[2]; +u32 apicid_sb600; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs690; +u32 sbdn_sb600; + + + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs690 = sysconf.sbdn; + sbdn_sb600 = 0; + + for (i = 0; i < 2; i++) { + bus_sb600[i] = 0; + } + for (i = 0; i < 8; i++) { + bus_rs690[i] = 0; + } + + bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb600[0] = bus_rs690[0]; + + /* sb600 */ + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); + if (dev) { + bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs690 */ + for (i = 1; i < 8; i++) { + dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); + if (dev) { + bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb600 = apicid_base + 0; +} diff --git a/src/mainboard/technexion/tim_5690/irq_tables.c b/src/mainboard/technexion/tim_5690/irq_tables.c new file mode 100644 index 0000000..d1342ee --- /dev/null +++ b/src/mainboard/technexion/tim_5690/irq_tables.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; +extern unsigned long sbdn_sb600; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb600[0]; + pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/technexion/tim_5690/mainboard.c b/src/mainboard/technexion/tim_5690/mainboard.c new file mode 100644 index 0000000..3423e51 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/mainboard.c @@ -0,0 +1,261 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb600/sb600.h> +#include <superio/ite/it8712f/it8712f.h> +#include "tn_post_code.h" +#include "vgabios.h" + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ +#define SMBUS_IO_BASE 0x1000 + + +/* Video BIOS Function Extensions Specification + */ +//Callback Sub-Function 00h - Get LCD Panel ID +#define LCD_PANEL_ID_NO 0x00 /* No LCD */ +#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */ +#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */ +#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */ +#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */ +#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */ +#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */ +//Callback Sub-Function 05h – Select Boot-up TV Standard +#define TV_MODE_00 0x00 /* NTSC */ +#define TV_MODE_01 0x01 /* PAL */ +#define TV_MODE_02 0x02 /* PALM */ +#define TV_MODE_03 0x03 /* PAL60 */ +#define TV_MODE_04 0x04 /* NTSCJ */ +#define TV_MODE_05 0x05 /* PALCN */ +#define TV_MODE_06 0x06 /* PALN */ +#define TV_MODE_09 0x09 /* SCART-RGB */ +#define TV_MODE_NO 0xff /* No TV Support */ + +/* The base address is 0x2e or 0x4e, depending on config bytes. */ +#define SIO_BASE 0x2e +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global configuration registers. */ +#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ +#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ +#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ +#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ +#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */ +#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ + +#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */ +#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */ + +int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + + +/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the + LDN the register belongs to, before you can access the register. */ +static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +static void it8712f_enter_conf(void) +{ + /* Enter the configuration state (MB PnP mode). */ + + /* Perform MB PnP setup to put the SIO chip at 0x2e. */ + /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ + /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ + outb(0x87, IT8712F_CONFIGURATION_PORT); + outb(0x01, IT8712F_CONFIGURATION_PORT); + outb(0x55, IT8712F_CONFIGURATION_PORT); + outb(0x55, IT8712F_CONFIGURATION_PORT); +} + +static void it8712f_exit_conf(void) +{ + /* Exit the configuration state (MB PnP mode). */ + it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); +} + +/* set thermal config + */ +static void set_thermal_config(void) +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb600 settings for thermal config */ + /* set SB600 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/* Mainboard specific GPIO setup. */ +static void mb_gpio_init(u16 *iobase) +{ + /* Init Super I/O GPIOs. */ + it8712f_enter_conf(); + outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX); + outb(IT8712F_GPIO, SIO_DATA); + outb(0x62, SIO_INDEX); + outb((*iobase >> 8), SIO_DATA); + outb(0x63, SIO_INDEX); + outb((*iobase & 0xff), SIO_DATA); + it8712f_exit_conf(); +} + +#if CONFIG_VGA_ROM_RUN +/* The LCD's panel id seletion. */ +static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id) +{ + switch (num_id) { + case 0x1: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01; + break; + case 0x2: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02; + break; + case 0x3: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03; + break; + case 0x4: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04; + break; + case 0x5: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05; + break; + case 0x6: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06; + break; + default: + vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO; + break; + } +} +#endif + +/************************************************* +* enable the dedicated function in tim5690 board. +* This function called early than rs690_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + u16 gpio_base = IT8712F_SIMPLE_IO_BASE; +#if CONFIG_VGA_ROM_RUN + rs690_vbios_regs vbios_regs; + u8 port2; +#endif + + printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev); + + mb_gpio_init(&gpio_base); + +#if CONFIG_VGA_ROM_RUN + /* The LCD's panel id seletion by switch. */ + port2 = inb(gpio_base+1); + lcd_panel_id(&vbios_regs, ((~port2) & 0xf)); + + /* No support TV */ + vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO; + vgabios_init(&vbios_regs); +#endif + + set_thermal_config(); +} + +void mainboard_post(u8 value) +{ + switch (value) { + case POST_ENTER_ELF_BOOT: + technexion_post_code(LED_MESSAGE_FINISH); + break; + } +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/technexion/tim_5690/mptable.c b/src/mainboard/technexion/tim_5690/mptable.c new file mode 100644 index 0000000..8b86b02 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/mptable.c @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; + +extern u32 apicid_sb600; + +extern u32 sbdn_rs690; +extern u32 sbdn_sb600; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb600[0], + PCI_DEVFN(sbdn_sb600 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb600, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/technexion/tim_5690/resourcemap.c b/src/mainboard/technexion/tim_5690/resourcemap.c new file mode 100644 index 0000000..0b80b70 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_tim5690_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/technexion/tim_5690/romstage.c b/src/mainboard/technexion/tim_5690/romstage.c new file mode 100644 index 0000000..68373b9 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/romstage.c @@ -0,0 +1,168 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <spd.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/amd/rs690/early_setup.c" +#include "southbridge/amd/sb600/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(u32 device, u32 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "tn_post_code.c" +#include "speaker.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; + int needs_reset = 0; + u32 bsp_apicid = 0; + msr_t msr; + struct cpuid_result cpuid1; + struct sys_info *sysinfo = &sysinfo_car; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + /* sb600_lpc_port80(); */ + sb600_pci_port80(); + } + + technexion_post_code_init(); + technexion_post_code(LED_MESSAGE_START); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + enable_rs690_dev8(); + sb600_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); + + setup_tim5690_resource_map(); + + setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched */ + wait_all_core0_started(); + start_other_cores(); +#endif + wait_all_aps_started(bsp_apicid); + + ht_setup_chains_x(sysinfo); + + /* run _early_setup before soft-reset. */ + rs690_early_setup(); + sb600_early_setup(); + + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + cpuid1 = cpuid(0x80000007); + if ((cpuid1.edx & 0x6) == 0x6) { + /* Read FIDVID_STATUS */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + /* show final fid and vid */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + } else { + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); + } + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + rs690_htinit(); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + speaker_init(255); + speaker_on_nodelay(); + + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now; */ + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", + sysinfo->nodes, sysinfo->ctrl, spd_addr); + + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + technexion_post_code(LED_MESSAGE_RAM); + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + speaker_off_nodelay(); + + rs690_before_pci_init(); + sb600_before_pci_init(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/technexion/tim_5690/speaker.c b/src/mainboard/technexion/tim_5690/speaker.c new file mode 100644 index 0000000..e4d2a87 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/speaker.c @@ -0,0 +1,91 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifdef __PRE_RAM__ + +#include <arch/cpu.h> +#include "southbridge/amd/sb600/sb600.h" + +#else + +#include <arch/io.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "southbridge/amd/sb600/sb600.h" +#include <delay.h> + +#endif /* __PRE_RAM__ */ + +#include "speaker.h" + +void speaker_init(uint8_t time) { + /* SB600 RRG. + * Options_0 - RW - 8 bits - [PM_Reg: 60h]. + * SpkrEn, bit[5]=1b, Setting this bit will configure GPIO2 to be speaker output. + */ +#ifdef __PRE_RAM__ + pmio_write(0x60, (pmio_read(0x60) | (1<<5))); +#else + pm_iowrite(0x60, (pm_ioread(0x60) | (1<<5))); +#endif /* __PRE_RAM__ */ + + /* SB600 RRG. + * Tmr1CntrlWord - RW - 8 bits - [IO_Reg: 43h]. + * ModeSelect, bit[3:1]=011b, Square wave output. + * CmmandSelect, bit[5:4]=11b, Read/write least, and then most significant byte. + * CounterSelect, bit[7:6]=10b, Select counter 2. + */ + outb(0xb6, 0x43); + + + /* SB600 RRG. + * TimerCh2- RW - 8 bits - [IO_Reg: 42h]. + */ + outb(time, 0x42); +} + +void speaker_on_nodelay(void) { + /* SB600 RRG. + * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. + * SpkrEnable, bit[0]=1b, Enable counter 2 + * SpkrTmrEnable, bit[1]=1b, Speaker timer on + */ + outb(inb(0x61) | 0x03, 0x61); +} + +void speaker_on_delay(void) { + speaker_on_nodelay(); + mdelay(100); +} + +void speaker_off_nodelay(void) { + /* SB600 RRG. + * Nmi_Status - RW - 8 bits - [IO_Reg: 61h]. + * SpkrEnable, bit[0]=0b, Disable counter 2 + * SpkrTmrEnable, bit[1]=0b, Speaker timer off + */ + outb(inb(0x61) & ~0x03, 0x61); +} + +void speaker_off_delay(void) { + speaker_off_nodelay(); + mdelay(100); +} diff --git a/src/mainboard/technexion/tim_5690/speaker.h b/src/mainboard/technexion/tim_5690/speaker.h new file mode 100644 index 0000000..e4a5fd0 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/speaker.h @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +void speaker_init(uint8_t time); +void speaker_on_nodelay(void); +void speaker_off_nodelay(void); +void speaker_on_delay(void); +void speaker_off_delay(void); diff --git a/src/mainboard/technexion/tim_5690/tn_post_code.c b/src/mainboard/technexion/tim_5690/tn_post_code.c new file mode 100644 index 0000000..422627e --- /dev/null +++ b/src/mainboard/technexion/tim_5690/tn_post_code.c @@ -0,0 +1,227 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifdef __PRE_RAM__ + +#include <arch/cpu.h> +#include "southbridge/amd/sb600/sb600.h" + +#else + +#include <device/pci.h> +#include <device/pci_ids.h> + +#endif + +#include "tn_post_code.h" + + +#ifdef __PRE_RAM__ + +// TechNexion's Post Code Initially. +void technexion_post_code_init(void) +{ + uint8_t reg8_data; + device_t dev=0; + + // SMBus Module and ACPI Block (Device 20, Function 0) + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); + + // LED[bit0]:GPIO0 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x60); + reg8_data |= (1<<7); // 1: GPIO if not used by SATA + pmio_write(0x60, reg8_data); + + reg8_data = pci_read_config8(dev, 0x80); + reg8_data = ((reg8_data | (1<<0)) & ~(1<<4)); + pci_write_config8(dev, 0x80, reg8_data); + + // LED[bit1]:GPIO1 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0x80); + reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); + pci_write_config8(dev, 0x80, reg8_data); + + // LED[bit2]:GPIO4 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x5e); + reg8_data &= ~(1<<7); // 0: GPIO if not used by SATA + pmio_write(0x5e, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<0); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<0); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit3]:GPIO6 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x60); + reg8_data |= (1<<7); // 1: GPIO if not used by SATA + pmio_write(0x60, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<2); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<2); + pci_write_config8(dev, 0xa9, reg8_data); + // LED[bit4]:GPIO7 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<3); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<3); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit5]:GPIO8 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xa8); + reg8_data |= (1<<4); + pci_write_config8(dev, 0xa8, reg8_data); + + reg8_data = pci_read_config8(dev, 0xa9); + reg8_data &= ~(1<<4); + pci_write_config8(dev, 0xa9, reg8_data); + + // LED[bit6]:GPIO10 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pci_read_config8(dev, 0xab); + reg8_data = ((reg8_data | (1<<0)) & ~(1<<1)); + pci_write_config8(dev, 0xab, reg8_data); + + // LED[bit7]:GPIO66 + // This is reference SB600 RRG 4.1.1 GPIO + reg8_data = pmio_read(0x68); + reg8_data &= ~(1<<5); // 0: GPIO + pmio_write(0x68, reg8_data); + + reg8_data = pci_read_config8(dev, 0x7e); + reg8_data = ((reg8_data | (1<<1)) & ~(1<<5)); + pci_write_config8(dev, 0x7e, reg8_data); + +} + +#endif + +/* TechNexion's Post Code. + */ +void technexion_post_code(uint8_t udata8) +{ + uint8_t u8_data; + device_t dev=0; + + // SMBus Module and ACPI Block (Device 20, Function 0) +#ifdef __PRE_RAM__ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM), 0); +#else + dev = dev_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB600_SM, 0); +#endif + + udata8 = ~(udata8); + + // LED[bit0]:GPIO0 + u8_data = pci_read_config8(dev, 0x80); + if (udata8 & 0x1) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0x80, u8_data); + + // LED[bit1]:GPIO1 + u8_data = pci_read_config8(dev, 0x80); + if (udata8 & 0x2) { + u8_data |= (1<<1); + } + else { + u8_data &= ~(1<<1); + } + pci_write_config8(dev, 0x80, u8_data); + + // LED[bit2]:GPIO4 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x4) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit3]:GPIO6 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x8) { + u8_data |= (1<<2); + } + else { + u8_data &= ~(1<<2); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit4]:GPIO7 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x10) { + u8_data |= (1<<3); + } + else { + u8_data &= ~(1<<3); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit5]:GPIO8 + u8_data = pci_read_config8(dev, 0xa8); + if (udata8 & 0x20) { + u8_data |= (1<<4); + } + else { + u8_data &= ~(1<<4); + } + pci_write_config8(dev, 0xa8, u8_data); + + // LED[bit6]:GPIO10 + u8_data = pci_read_config8(dev, 0xab); + if (udata8 & 0x40) { + u8_data |= (1<<0); + } + else { + u8_data &= ~(1<<0); + } + pci_write_config8(dev, 0xab, u8_data); + + // LED[bit7]:GPIO66 + u8_data = pci_read_config8(dev, 0x7e); + if (udata8 & 0x80) { + u8_data |= (1<<1); + } + else { + u8_data &= ~(1<<1); + } + pci_write_config8(dev, 0x7e, u8_data); + +} diff --git a/src/mainboard/technexion/tim_5690/tn_post_code.h b/src/mainboard/technexion/tim_5690/tn_post_code.h new file mode 100644 index 0000000..46d7382 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/tn_post_code.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define LED_MESSAGE_START 0xFF +#define LED_MESSAGE_FINISH 0x99 +#define LED_MESSAGE_RAM 0x01 + + +#ifdef __PRE_RAM__ + +// TechNexion's Post Code Initially. +void technexion_post_code_init(void); + +#endif + +void technexion_post_code(uint8_t udata8); diff --git a/src/mainboard/technexion/tim_5690/vgabios.c b/src/mainboard/technexion/tim_5690/vgabios.c new file mode 100644 index 0000000..3d09a86 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/vgabios.c @@ -0,0 +1,79 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <stdlib.h> +#include <console/console.h> +#include <arch/interrupt.h> +#include "vgabios.h" +#include <x86emu/regs.h> + + +int tim5690_int15_handler(void); + +static rs690_vbios_regs vbios_regs_local; + +/* Initialization interrupt function */ +static void vbios_fun_init(rs690_vbios_regs *vbios_regs) +{ + vbios_regs_local.int15_regs.fun00_panel_id = vbios_regs->int15_regs.fun00_panel_id; + vbios_regs_local.int15_regs.fun05_tv_standard = vbios_regs->int15_regs.fun05_tv_standard; +} + +/* BIOS int15 function */ +int tim5690_int15_handler(void) +{ + int res = 0; + + printk(BIOS_DEBUG, "tim5690_int15_handler\n"); + + switch (X86_EAX & 0xffff) { + case AMD_RS690_INT15: + switch (X86_EBX & 0xff) { + case 0x00: + X86_EAX &= ~(0xff); + X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun00_panel_id; + res = 1; + break; + case 0x05: + X86_EAX &= ~(0xff); + X86_EBX = (X86_EBX & ~(0xff)) | vbios_regs_local.int15_regs.fun05_tv_standard; + res = 1; + break; + } + break; + default: + printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", + X86_EAX & 0xffff); + break; + } + + return res; +} + +/* Initialization VBIOS function */ +void vgabios_init(rs690_vbios_regs *vbios_regs) +{ + printk(BIOS_DEBUG, "vgabios_init\n"); + + mainboard_interrupt_handlers(0x15, &tim5690_int15_handler); + vbios_fun_init(vbios_regs); +} diff --git a/src/mainboard/technexion/tim_5690/vgabios.h b/src/mainboard/technexion/tim_5690/vgabios.h new file mode 100644 index 0000000..a353011 --- /dev/null +++ b/src/mainboard/technexion/tim_5690/vgabios.h @@ -0,0 +1,37 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 coresystems GmbH + * Copyright (C) 2009 Libra Li libra.li@technexion.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* AMD Chipset */ +#define AMD_RS690_INT15 0x4E08 + +typedef struct __rs690_int15_regs__ +{ + u8 fun00_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID + u8 fun05_tv_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard +}rs690_int15_regs; + +typedef struct __rs690_vbios_regs__ +{ + rs690_int15_regs int15_regs; +}rs690_vbios_regs; + +/* Initialization VBIOS function */ +extern void vgabios_init(rs690_vbios_regs *vbios_regs); diff --git a/src/mainboard/technexion/tim_8690/Kconfig b/src/mainboard/technexion/tim_8690/Kconfig new file mode 100644 index 0000000..7f9ac4f --- /dev/null +++ b/src/mainboard/technexion/tim_8690/Kconfig @@ -0,0 +1,55 @@ +if BOARD_TECHNEXION_TIM_8690 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SOCKET_S1G1 + select NORTHBRIDGE_AMD_AMDK8 + select SOUTHBRIDGE_AMD_RS690 + select SOUTHBRIDGE_AMD_SB600 + select SUPERIO_ITE_IT8712F + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select SB_HT_CHAIN_UNITID_OFFSET_ONLY + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select QRANK_DIMM_SUPPORT + select SET_FIDVID + +config MAINBOARD_DIR + string + default technexion/tim_8690 + +config APIC_ID_OFFSET + hex + default 0x0 + +config MAINBOARD_PART_NUMBER + string + default "TIM-8690" + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x1 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config IRQ_SLOT_COUNT + int + default 11 + +endif # BOARD_TECHNEXION_TIM_8690 diff --git a/src/mainboard/technexion/tim_8690/acpi/ide.asl b/src/mainboard/technexion/tim_8690/acpi/ide.asl new file mode 100644 index 0000000..7cee00d --- /dev/null +++ b/src/mainboard/technexion/tim_8690/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "ide.asl" + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/technexion/tim_8690/acpi/routing.asl b/src/mainboard/technexion/tim_8690/acpi/routing.asl new file mode 100644 index 0000000..8f7419a --- /dev/null +++ b/src/mainboard/technexion/tim_8690/acpi/routing.asl @@ -0,0 +1,258 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "routing.asl" + } +*/ + +/* Routing is in System Bus scope */ +Scope(_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 2, INTC, 0 }, + Package(){0x0013FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* Package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, 0, 16 }, + Package(){0x0013FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 2, 0, 18 }, + Package(){0x0013FFFF, 3, 0, 19 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/technexion/tim_8690/acpi/sata.asl b/src/mainboard/technexion/tim_8690/acpi/sata.asl new file mode 100644 index 0000000..1fadf40 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + #include "sata.asl" + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + _GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (_SB.P0PR) { + if (LGreater(_SB.P0IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P0PR) + } + + if (_SB.P1PR) { + if (LGreater(_SB.P1IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P1PR) + } + + if (_SB.P2PR) { + if (LGreater(_SB.P2IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P2PR) + } + + if (_SB.P3PR) { + if (LGreater(_SB.P3IS,0)) { + sleep(32) + } + Notify(_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, _SB.P3PR) + } + } +} diff --git a/src/mainboard/technexion/tim_8690/acpi/usb.asl b/src/mainboard/technexion/tim_8690/acpi/usb.asl new file mode 100644 index 0000000..8425002 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + #include "usb.asl" + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, _SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, _SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, _SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, _SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, _SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, _SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, _SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, _SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, _SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/technexion/tim_8690/acpi_tables.c b/src/mainboard/technexion/tim_8690/acpi_tables.c new file mode 100644 index 0000000..a3b35d5 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/acpi_tables.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include "northbridge/amd/amdk8/acpi.h" +#include <arch/cpu.h> +#include <cpu/amd/powernow.h> + +unsigned long acpi_fill_madt(unsigned long current) +{ + get_bus_conf(); + + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB600 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edge-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} diff --git a/src/mainboard/technexion/tim_8690/board_info.txt b/src/mainboard/technexion/tim_8690/board_info.txt new file mode 100644 index 0000000..dbda07e --- /dev/null +++ b/src/mainboard/technexion/tim_8690/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.technexion.com/index.php/tim-8690 diff --git a/src/mainboard/technexion/tim_8690/cmos.layout b/src/mainboard/technexion/tim_8690/cmos.layout new file mode 100644 index 0000000..d118897 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/cmos.layout @@ -0,0 +1,117 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 diff --git a/src/mainboard/technexion/tim_8690/devicetree.cb b/src/mainboard/technexion/tim_8690/devicetree.cb new file mode 100644 index 0000000..ff14075 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/devicetree.cb @@ -0,0 +1,116 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device cpu_cluster 0 on + chip cpu/amd/socket_S1G1 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x3050 inherit + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + device pci 5.0 on end # Internal Graphics 0x791F + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/technexion/tim_8690/dsdt.asl b/src/mainboard/technexion/tim_8690/dsdt.asl new file mode 100644 index 0000000..0968a83 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/dsdt.asl @@ -0,0 +1,1792 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "TECHNEXION", /* OEMID */ + "COREBOOT", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(_SB) { + + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve) + { + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + #include "acpi/routing.asl" + + Scope(_SB) { + + Method(OSFL, 0){ + + if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ + + if(CondRefOf(_OSI,Local1)) + { + Store(1, OSVR) /* Assume some form of XP */ + if (_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSVR) + } + } else { + If(WCMP(_OS,"Linux")) { + Store(3, OSVR) /* Linux */ + } Else { + Store(4, OSVR) /* Gotta be WinCE */ + } + } + Return(OSVR) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + _SB.CIRQ() + } + Store(Arg0, PMOD) + } + + Method(CIRQ, 0x00, NotSerialized) + { + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKA\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKA\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKA\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKB\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKB\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKB\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKC\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKC\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKC\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKD\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKD\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKD\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKE\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKE\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKE\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKF\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKF\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKF\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKG\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKG\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKG\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\_SB\LNKH\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\_SB\LNKH\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\_SB\LNKH\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * _PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(_PTS, 1) { + /* DBGO("\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(_SB.SBRI, 0x13)) { + * Store(0,_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + _SB.PCI0.SIOS (Arg0) + } /* End Method(_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * _GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(_GTS, 1) { + * DBGO("\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * _BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(_BFS, 1) { + /* DBGO("\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * _WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(_WAK, 1) { + /* DBGO("\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + _SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(_WAK) */ + + Scope(_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\_GPE\_L00\n") */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\_GPE\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\_GPE\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\_GPE\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\_GPE\_L09\n") */ + Notify (_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\_GPE\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\_GPE\_L0B\n") */ + Notify(_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\_GPE\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\_GPE\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\_GPE\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\_GPE\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\_GPE\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\_GPE\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\_GPE\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\_GPE\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\_GPE\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\_GPE\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\_GPE\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\_GPE\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\_GPE\_L18\n") */ + Notify(_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\_GPE\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\_GPE\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\_GPE\_L1B\n") */ + Notify(_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\_GPE\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\_GPE\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\_GPE\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\_GPE\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + #include "acpi/usb.asl" + + /* South Bridge */ + Scope(_SB) { /* Start _SB scope */ + #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the _SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\_SB\PCI0\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00120000) + #include "acpi/sata.asl" + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + #include "acpi/ide.asl" + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSVR,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\_SB\PCI0\LpcIsaBr\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE IT8712F Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the IT8712F MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* IT8712F magic number */ + } + /* Exit the IT8712F MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + + /* + * Keyboard PME is routed to SB600 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("IT8712F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00000000, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000001, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\_SB\PCI0\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * ShiftLeft(TOM2, 20, Local0) + * Subtract(Local0, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\_SB\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \_OS=") */ + /* DBGO(_OS) */ + /* DBGO("\n \_REV=") */ + /* DBGO(_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + OSFL() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End _SB scope */ + + Scope(_SI) { + Method(_SST, 1) { + /* DBGO("\_SI\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shadow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\_TZ\TZ00\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\_TZ\TZ00\_AL0\n") */ + Return(Package() {_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\_TZ\TZ00\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\_TZ\TZ00\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\_TZ\TZ00\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/technexion/tim_8690/fadt.c b/src/mainboard/technexion/tim_8690/fadt.c new file mode 100644 index 0000000..c238cbe --- /dev/null +++ b/src/mainboard/technexion/tim_8690/fadt.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include "southbridge/amd/sb600/sb600.h" + +/*extern*/ u16 pm_base = 0x800; +/* pm_base should be set in sb acpi */ +/* pm_base should be got from bar2 of rs690. Here I compact ACPI + * registers into 32 bytes limit. + * */ + +#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + pm_base &= 0xFFFF; + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); + pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); + pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); + pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in _PR.CPU0, 6 bytes */ + pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); + pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); + + pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ + pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ + + pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); + pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 20-2B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ + pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/technexion/tim_8690/get_bus_conf.c b/src/mainboard/technexion/tim_8690/get_bus_conf.c new file mode 100644 index 0000000..084e2b1 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/get_bus_conf.c @@ -0,0 +1,116 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS +#include <cpu/amd/multicore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_rs690[8]; +u8 bus_sb600[2]; +u32 apicid_sb600; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 sbdn_rs690; +u32 sbdn_sb600; + + + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs690 = sysconf.sbdn; + sbdn_sb600 = 0; + + for (i = 0; i < 2; i++) { + bus_sb600[i] = 0; + } + for (i = 0; i < 8; i++) { + bus_rs690[i] = 0; + } + + bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb600[0] = bus_rs690[0]; + + /* sb600 */ + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); + if (dev) { + bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + + /* rs690 */ + for (i = 1; i < 8; i++) { + dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); + if (dev) { + bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } + + /* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb600 = apicid_base + 0; +} diff --git a/src/mainboard/technexion/tim_8690/irq_tables.c b/src/mainboard/technexion/tim_8690/irq_tables.c new file mode 100644 index 0000000..d1342ee --- /dev/null +++ b/src/mainboard/technexion/tim_8690/irq_tables.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + + + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; +extern unsigned long sbdn_sb600; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb600[0]; + pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk(BIOS_INFO, "write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/technexion/tim_8690/mainboard.c b/src/mainboard/technexion/tim_8690/mainboard.c new file mode 100644 index 0000000..6010eb1 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/mainboard.c @@ -0,0 +1,153 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <southbridge/amd/sb600/sb600.h> + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ +#define SMBUS_IO_BASE 0x1000 + +extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, + u8 val); +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + + + + +/*************************************************** +* This board, the TIM-8690 has two Marvel 88e5056 PCI-E +* 10/100/1000 chips on board. +* Both of their pin PERSTn pins are connected to GPIO 5 of the +* SB600 southbridge. +****************************************************/ +static void enable_onboard_nic(void) +{ + + u8 byte; + device_t sm_dev; + + printk(BIOS_INFO, "enable_onboard_nic.\n"); + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + byte = pci_read_config8(sm_dev, 0x9a); + byte |= ( 1 << 7); + pci_write_config8(sm_dev, 0x9a, byte); + + byte=pm_ioread(0x59); + byte &= ~( 1<< 5); + pm_iowrite(0x59,byte); + + byte = pci_read_config8(sm_dev, 0xA8); + + byte |= (1 << 1); //set bit 1 to high + pci_write_config8(sm_dev, 0xA8, byte); +} + +/* set thermal config + */ +static void set_thermal_config(void) +{ + u8 byte; + u16 word; + device_t sm_dev; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb600 settings for thermal config */ + /* set SB600 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = pci_read_config16(sm_dev, 0x56); + word |= 1 << 7; + pci_write_config16(sm_dev, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/************************************************* +* enable the dedicated function in tim8690 board. +* This function called early than rs690_enable. +*************************************************/ +static void mainboard_enable(device_t dev) +{ + printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); + + enable_onboard_nic(); + set_thermal_config(); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/technexion/tim_8690/mptable.c b/src/mainboard/technexion/tim_8690/mptable.c new file mode 100644 index 0000000..8b86b02 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/mptable.c @@ -0,0 +1,113 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; + +extern u32 apicid_sb600; + +extern u32 sbdn_rs690; +extern u32 sbdn_sb600; + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int bus_isa; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + + get_bus_conf(); + + mptable_write_buses(mc, NULL, &bus_isa); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb600[0], + PCI_DEVFN(sbdn_sb600 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb600, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/technexion/tim_8690/resourcemap.c b/src/mainboard/technexion/tim_8690/resourcemap.c new file mode 100644 index 0000000..05cbd63 --- /dev/null +++ b/src/mainboard/technexion/tim_8690/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_tim8690_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} diff --git a/src/mainboard/technexion/tim_8690/romstage.c b/src/mainboard/technexion/tim_8690/romstage.c new file mode 100644 index 0000000..0ba0fce --- /dev/null +++ b/src/mainboard/technexion/tim_8690/romstage.c @@ -0,0 +1,154 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "lib/delay.c" +#include <spd.h> +#include "cpu/x86/lapic.h" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <superio/ite/common/ite.h> +#include <superio/ite/it8712f/it8712f.h> +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "southbridge/amd/rs690/early_setup.c" +#include "southbridge/amd/sb600/early_setup.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) { } +static void activate_spd_rom(const struct mem_controller *ctrl) { } + +static inline int spd_read_byte(u32 device, u32 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "lib/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/early_ht.c" + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; + int needs_reset = 0; + u32 bsp_apicid = 0; + msr_t msr; + struct cpuid_result cpuid1; + struct sys_info *sysinfo = &sysinfo_car; + + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + /* sb600_lpc_port80(); */ + sb600_pci_port80(); + } + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + enable_rs690_dev8(); + sb600_lpc_init(); + + ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + ite_kill_watchdog(GPIO_DEV); + + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); + + setup_tim8690_resource_map(); + + setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS + /* It is said that we should start core1 after all core0 launched */ + wait_all_core0_started(); + start_other_cores(); +#endif + wait_all_aps_started(bsp_apicid); + + ht_setup_chains_x(sysinfo); + + /* run _early_setup before soft-reset. */ + rs690_early_setup(); + sb600_early_setup(); + + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + cpuid1 = cpuid(0x80000007); + if ((cpuid1.edx & 0x6) == 0x6 ) { + /* Read FIDVID_STATUS */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + /* show final fid and vid */ + msr=rdmsr(0xc0010042); + printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + } else { + printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); + } + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + rs690_htinit(); + printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); + + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now; */ + printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", + sysinfo->nodes, sysinfo->ctrl, spd_addr); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + rs690_before_pci_init(); + sb600_before_pci_init(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/technologic/Kconfig b/src/mainboard/technologic/Kconfig index 792dc5e..a0a2e4e 100644 --- a/src/mainboard/technologic/Kconfig +++ b/src/mainboard/technologic/Kconfig @@ -3,12 +3,12 @@ if VENDOR_TECHNOLOGIC choice prompt "Mainboard model"
-config BOARD_TECHNOLOGIC_TS5300 +config BOARD_TECHNOLOGIC_TS_5300 bool "TS-5300"
endchoice
-source "src/mainboard/technologic/ts5300/Kconfig" +source "src/mainboard/technologic/ts_5300/Kconfig"
config MAINBOARD_VENDOR string diff --git a/src/mainboard/technologic/ts5300/Kconfig b/src/mainboard/technologic/ts5300/Kconfig deleted file mode 100644 index 0006fd7..0000000 --- a/src/mainboard/technologic/ts5300/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if BOARD_TECHNOLOGIC_TS5300 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SC520 - select ROMCC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_1024 - -config MAINBOARD_DIR - string - default technologic/ts5300 - -config MAINBOARD_PART_NUMBER - string - default "TS-5300" - -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_TECHNOLOGIC_TS5300 diff --git a/src/mainboard/technologic/ts5300/board_info.txt b/src/mainboard/technologic/ts5300/board_info.txt deleted file mode 100644 index ef8a731..0000000 --- a/src/mainboard/technologic/ts5300/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: half -Board URL: http://www.embeddedarm.com/epc/ts5300-spec-h.html diff --git a/src/mainboard/technologic/ts5300/cmos.layout b/src/mainboard/technologic/ts5300/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/technologic/ts5300/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb deleted file mode 100644 index 6c83e20..0000000 --- a/src/mainboard/technologic/ts5300/devicetree.cb +++ /dev/null @@ -1,6 +0,0 @@ -chip cpu/amd/sc520 - device domain 0 on - device pci 0.0 on end - end - -end diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c deleted file mode 100644 index 15dcddd..0000000 --- a/src/mainboard/technologic/ts5300/irq_tables.c +++ /dev/null @@ -1,31 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x8086, /* Vendor */ - 0x122e, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0}, - {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c deleted file mode 100644 index 20b893e..0000000 --- a/src/mainboard/technologic/ts5300/mainboard.c +++ /dev/null @@ -1,147 +0,0 @@ -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <cpu/amd/sc520.h> - - -#if 0 -static void irqdump(void) -{ - volatile unsigned char *irq; - void *mmcr; - - - int i; - int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a, - 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c, - 0xd20, 0xd21, 0xd22, 0xd28, 0xd29, - 0xd30, 0xd31, 0xd32, 0xd33, - 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, - 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, - -1}; - mmcr = (void *) 0xfffef000; - - printk(BIOS_ERR, "mmcr is %p\n", mmcr); - for(i = 0; irqlist[i] >= 0; i++) { - irq = mmcr + irqlist[i]; - printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq); - } - -} -#endif - -/* TODO: finish up mmcr struct in sc520.h, and; - - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 -*/ -static void mainboard_enable(struct device *dev) -{ - volatile struct mmcr *mmcr = MMCRDEFAULT; - - /* currently, nothing in the device to use, so ignore it. */ - printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__); - - /* from fuctory bios */ - /* NOTE: the following interrupt settings made interrupts work - * for hard drive, and serial, but not for ethernet - */ - - printk(BIOS_ERR, "Setting up PIC\n"); - /* just do what they say and nobody gets hurt. */ - mmcr->pic.pcicr = 0 ; - /* all ints to level */ - mmcr->pic.mpicmode = 0; - mmcr->pic.sl1picmode = 0; - mmcr->pic.sl2picmode = 0; - - mmcr->pic.intpinpol = 0x100; - - mmcr->pic.pit0map = 1; - mmcr->pic.uart1map = 0x0c; - mmcr->pic.uart2map = 0x0b; - mmcr->pic.rtcmap = 0x03; - mmcr->pic.ferrmap = 0x00; - mmcr->pic.intpinpol = 0x100; - - mmcr->pic.gp0imap = 0x00; - mmcr->pic.gp1imap = 0x02; - mmcr->pic.gp2imap = 0x07; - mmcr->pic.gp3imap = 0x05; - mmcr->pic.gp4imap = 0x06; - mmcr->pic.gp5imap = 0x0d; - mmcr->pic.gp6imap = 0x15; - mmcr->pic.gp7imap = 0x16; - mmcr->pic.gp8imap = 0x3; - mmcr->pic.gp9imap = 0x4; - mmcr->pic.gp10imap = 0x9; - - // irqdump(); - - printk(BIOS_ERR, "Setting up sysarb\n"); - mmcr->dbctl.dbctl = 0x01; - mmcr->sysarb.ctl = 0x00; - mmcr->sysarb.menb = 0x1f; - mmcr->sysarb.prictl = 0x40000f0f; - - /* this is bios setting, depends on sysarb above */ - mmcr->hostbridge.ctl = 0x0; - mmcr->hostbridge.tgtirqctl = 0x0; - mmcr->hostbridge.tgtirqsta = 0xf00; - mmcr->hostbridge.mstirqctl = 0x0; - mmcr->hostbridge.mstirqsta = 0x708; - - printk(BIOS_ERR, "Setting up pio\n"); - /* pio */ - mmcr->pio.pfs15_0 = 0xffff; - mmcr->pio.pfs31_16 = 0xffff; - mmcr->pio.cspfs = 0xfe; - mmcr->pio.clksel = 0x13; - mmcr->pio.dsctl = 0x200; - mmcr->pio.data15_0 = 0xde04; - mmcr->pio.data31_16 = 0xef9f; - - printk(BIOS_ERR, "Setting up sysmap\n"); - /* system memory map */ - mmcr->sysmap.adddecctl = 0x04; - mmcr->sysmap.wpvsta = 0x8006; - mmcr->sysmap.par[1] = 0x340f0070; - mmcr->sysmap.par[2] = 0x380701f0; - mmcr->sysmap.par[3] = 0x3c0103f6; - mmcr->sysmap.par[4] = 0x2c0f0300; - mmcr->sysmap.par[5] = 0x447c00a0; - mmcr->sysmap.par[6] = 0xe600000c; - mmcr->sysmap.par[7] = 0x300046e8; - mmcr->sysmap.par[8] = 0x500400d0; - mmcr->sysmap.par[9] = 0x281f0140; - mmcr->sysmap.par[13] = 0x8a07c940; - mmcr->sysmap.par[15] = 0xee00400e; - - printk(BIOS_ERR, "Setting up gpctl\n"); - mmcr->gpctl.gpcsrt = 0x01; - mmcr->gpctl.gpcspw = 0x09; - mmcr->gpctl.gpcsoff = 0x01; - mmcr->gpctl.gprdw = 0x07; - mmcr->gpctl.gprdoff = 0x02; - mmcr->gpctl.gpwrw = 0x07; - mmcr->gpctl.gpwroff = 0x02; - - //mmcr->reset.sysinfo = 0xdf; - //mmcr->reset.rescfg = 0x5; - /* their IRQ table is wrong. Just hardwire it */ - //{ - // char pciints[4] = {15, 15, 15, 15}; - // pci_assign_irqs(0, 12, pciints); - //} - /* the assigned failed but we just noticed -- there is no - * dma mapping, and selftest on e100 requires that dma work - */ - mmcr->dmacontrol.extchanmapa = 0xf210; - mmcr->dmacontrol.extchanmapb = 0xffff; - - printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/technologic/ts5300/romstage.c b/src/mainboard/technologic/ts5300/romstage.c deleted file mode 100644 index 5d33bae..0000000 --- a/src/mainboard/technologic/ts5300/romstage.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * TS5300 specific initialization code. - * written by Stefan Reinauer stepan@coresystems.de - * (c) 2006 coresystems GmbH - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include "cpu/x86/bist.h" - -#define TS5300_LED_OFF outb((inb(0x77)&0xfe), 0x77) -#define TS5300_LED_ON outb((inb(0x77)|1), 0x77) - -#define TS9500_LED_OFF outb((inb(0x19a)&0xfe), 0x19a) -#define TS9500_LED_ON outb((inb(0x19a)|1), 0x19a) - -/* PAR register setup */ -void setup_pars(void) -{ - volatile unsigned long *par; - par = (unsigned long *) 0xfffef088; - - /* NOTE: Ron says, move this to mainboard.c */ - *par++ = 0x00000000; - *par++ = 0x340f0070; - *par++ = 0x380701f0; - *par++ = 0x3c0103f6; - *par++ = 0x2c0f0300; - *par++ = 0x447c00a0; - *par++ = 0xe600000c; - *par++ = 0x300046e8; - *par++ = 0x500400d0; - *par++ = 0x281f0140; - *par++ = 0x00000000; - *par++ = 0x00000000; - *par++ = 0x00000000; - *par++ = 0x8a07c940; /* Flash setup */ - *par++ = 0x00000000; - *par++ = 0xee00400e; -} - -#include "cpu/amd/sc520/raminit.c" - -static void identify_ts9500(void) -{ - unsigned i, val; - - TS9500_LED_ON; - - print_err("TS-9500 add-on found:\n"); - val=inb(0x19b); - for (i=0; i<8; i++) { - print_err(" DIP"); - print_err_char(i+0x31); - print_err(": "); - if((val&(1<<i))!=0) - print_err("on\n"); - else - print_err("off\n"); - } - print_err("\n"); - - val=inb(0x19a); - - for (i=6; i<8; i++) { - print_err(" JP"); - print_err_char(i+0x30-5); - print_err(": "); - if((val&(1<<i))!=0) - print_err("on\n"); - else - print_err("off\n"); - } - print_err("\n"); - - TS9500_LED_OFF; -} - -static void identify_system(void) -{ - unsigned i,val; - - print_err("Mainboard: "); - val=inb(0x74); - switch(val) { - case 0x50: print_err("TS-5300\n"); break; - case 0x40: print_err("TS-5400\n"); break; - case 0x60: print_err("TS-5500\n"); break; - case 0x20: print_err("TS-5600\n"); break; - case 0x70: print_err("TS-5700\n"); break; - default: print_err("unknown\n"); break; - } - - val=inb(0x75); - print_err(" SRAM option: "); - if((val&1)==0) print_err("not "); - print_err("installed\n"); - - print_err(" RS-485 option: "); - if((val&2)==0) print_err("not "); - print_err("installed\n"); - - val=inb(0x76); - print_err(" Temp. range: "); - if((val&2)==0) print_err("commercial\n"); - else print_err("industrial\n"); - - print_err("\n"); - - val=inb(0x77); - for (i=1; i<8; i++) { - print_err(" JP"); - print_err_char(i+0x30); - print_err(": "); - if((val&(1<<i))!=0) - print_err("on\n"); - else - print_err("off\n"); - } - print_err("\n"); - - /* Detect TS-9500 */ - val=inb(0x19d); - if(val==0x5f) - identify_ts9500(); -} - -static void hard_reset(void) -{ - print_err("Hard reset called.\n"); - while (1) ; -} - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - volatile int i; - unsigned val; - - TS5300_LED_ON; - - // Let the hardware settle a bit. - for(i = 0; i < 100; i++) - ; - - setupsc520(); - console_init(); - - - print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/%5Cn"); - staticmem(); - -/* Void warranty when label is removed. */ -dummy_romcc_workaround_label: - do { } while (0); - - print_err("Memory initialized: 32MB\n"); - -#if 1 - identify_system(); -#endif - - TS5300_LED_OFF; -} diff --git a/src/mainboard/technologic/ts_5300/Kconfig b/src/mainboard/technologic/ts_5300/Kconfig new file mode 100644 index 0000000..7bd8aaf --- /dev/null +++ b/src/mainboard/technologic/ts_5300/Kconfig @@ -0,0 +1,23 @@ +if BOARD_TECHNOLOGIC_TS_5300 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_AMD_SC520 + select ROMCC + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_1024 + +config MAINBOARD_DIR + string + default technologic/ts_5300 + +config MAINBOARD_PART_NUMBER + string + default "TS-5300" + +config IRQ_SLOT_COUNT + int + default 2 + +endif # BOARD_TECHNOLOGIC_TS_5300 diff --git a/src/mainboard/technologic/ts_5300/board_info.txt b/src/mainboard/technologic/ts_5300/board_info.txt new file mode 100644 index 0000000..ef8a731 --- /dev/null +++ b/src/mainboard/technologic/ts_5300/board_info.txt @@ -0,0 +1,2 @@ +Category: half +Board URL: http://www.embeddedarm.com/epc/ts5300-spec-h.html diff --git a/src/mainboard/technologic/ts_5300/cmos.layout b/src/mainboard/technologic/ts_5300/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/technologic/ts_5300/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/technologic/ts_5300/devicetree.cb b/src/mainboard/technologic/ts_5300/devicetree.cb new file mode 100644 index 0000000..6c83e20 --- /dev/null +++ b/src/mainboard/technologic/ts_5300/devicetree.cb @@ -0,0 +1,6 @@ +chip cpu/amd/sc520 + device domain 0 on + device pci 0.0 on end + end + +end diff --git a/src/mainboard/technologic/ts_5300/irq_tables.c b/src/mainboard/technologic/ts_5300/irq_tables.c new file mode 100644 index 0000000..15dcddd --- /dev/null +++ b/src/mainboard/technologic/ts_5300/irq_tables.c @@ -0,0 +1,31 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0}, + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/technologic/ts_5300/mainboard.c b/src/mainboard/technologic/ts_5300/mainboard.c new file mode 100644 index 0000000..20b893e --- /dev/null +++ b/src/mainboard/technologic/ts_5300/mainboard.c @@ -0,0 +1,147 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <cpu/amd/sc520.h> + + +#if 0 +static void irqdump(void) +{ + volatile unsigned char *irq; + void *mmcr; + + + int i; + int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a, + 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c, + 0xd20, 0xd21, 0xd22, 0xd28, 0xd29, + 0xd30, 0xd31, 0xd32, 0xd33, + 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, + 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, + -1}; + mmcr = (void *) 0xfffef000; + + printk(BIOS_ERR, "mmcr is %p\n", mmcr); + for(i = 0; irqlist[i] >= 0; i++) { + irq = mmcr + irqlist[i]; + printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq); + } + +} +#endif + +/* TODO: finish up mmcr struct in sc520.h, and; + - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 +*/ +static void mainboard_enable(struct device *dev) +{ + volatile struct mmcr *mmcr = MMCRDEFAULT; + + /* currently, nothing in the device to use, so ignore it. */ + printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__); + + /* from fuctory bios */ + /* NOTE: the following interrupt settings made interrupts work + * for hard drive, and serial, but not for ethernet + */ + + printk(BIOS_ERR, "Setting up PIC\n"); + /* just do what they say and nobody gets hurt. */ + mmcr->pic.pcicr = 0 ; + /* all ints to level */ + mmcr->pic.mpicmode = 0; + mmcr->pic.sl1picmode = 0; + mmcr->pic.sl2picmode = 0; + + mmcr->pic.intpinpol = 0x100; + + mmcr->pic.pit0map = 1; + mmcr->pic.uart1map = 0x0c; + mmcr->pic.uart2map = 0x0b; + mmcr->pic.rtcmap = 0x03; + mmcr->pic.ferrmap = 0x00; + mmcr->pic.intpinpol = 0x100; + + mmcr->pic.gp0imap = 0x00; + mmcr->pic.gp1imap = 0x02; + mmcr->pic.gp2imap = 0x07; + mmcr->pic.gp3imap = 0x05; + mmcr->pic.gp4imap = 0x06; + mmcr->pic.gp5imap = 0x0d; + mmcr->pic.gp6imap = 0x15; + mmcr->pic.gp7imap = 0x16; + mmcr->pic.gp8imap = 0x3; + mmcr->pic.gp9imap = 0x4; + mmcr->pic.gp10imap = 0x9; + + // irqdump(); + + printk(BIOS_ERR, "Setting up sysarb\n"); + mmcr->dbctl.dbctl = 0x01; + mmcr->sysarb.ctl = 0x00; + mmcr->sysarb.menb = 0x1f; + mmcr->sysarb.prictl = 0x40000f0f; + + /* this is bios setting, depends on sysarb above */ + mmcr->hostbridge.ctl = 0x0; + mmcr->hostbridge.tgtirqctl = 0x0; + mmcr->hostbridge.tgtirqsta = 0xf00; + mmcr->hostbridge.mstirqctl = 0x0; + mmcr->hostbridge.mstirqsta = 0x708; + + printk(BIOS_ERR, "Setting up pio\n"); + /* pio */ + mmcr->pio.pfs15_0 = 0xffff; + mmcr->pio.pfs31_16 = 0xffff; + mmcr->pio.cspfs = 0xfe; + mmcr->pio.clksel = 0x13; + mmcr->pio.dsctl = 0x200; + mmcr->pio.data15_0 = 0xde04; + mmcr->pio.data31_16 = 0xef9f; + + printk(BIOS_ERR, "Setting up sysmap\n"); + /* system memory map */ + mmcr->sysmap.adddecctl = 0x04; + mmcr->sysmap.wpvsta = 0x8006; + mmcr->sysmap.par[1] = 0x340f0070; + mmcr->sysmap.par[2] = 0x380701f0; + mmcr->sysmap.par[3] = 0x3c0103f6; + mmcr->sysmap.par[4] = 0x2c0f0300; + mmcr->sysmap.par[5] = 0x447c00a0; + mmcr->sysmap.par[6] = 0xe600000c; + mmcr->sysmap.par[7] = 0x300046e8; + mmcr->sysmap.par[8] = 0x500400d0; + mmcr->sysmap.par[9] = 0x281f0140; + mmcr->sysmap.par[13] = 0x8a07c940; + mmcr->sysmap.par[15] = 0xee00400e; + + printk(BIOS_ERR, "Setting up gpctl\n"); + mmcr->gpctl.gpcsrt = 0x01; + mmcr->gpctl.gpcspw = 0x09; + mmcr->gpctl.gpcsoff = 0x01; + mmcr->gpctl.gprdw = 0x07; + mmcr->gpctl.gprdoff = 0x02; + mmcr->gpctl.gpwrw = 0x07; + mmcr->gpctl.gpwroff = 0x02; + + //mmcr->reset.sysinfo = 0xdf; + //mmcr->reset.rescfg = 0x5; + /* their IRQ table is wrong. Just hardwire it */ + //{ + // char pciints[4] = {15, 15, 15, 15}; + // pci_assign_irqs(0, 12, pciints); + //} + /* the assigned failed but we just noticed -- there is no + * dma mapping, and selftest on e100 requires that dma work + */ + mmcr->dmacontrol.extchanmapa = 0xf210; + mmcr->dmacontrol.extchanmapb = 0xffff; + + printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/technologic/ts_5300/romstage.c b/src/mainboard/technologic/ts_5300/romstage.c new file mode 100644 index 0000000..5d33bae --- /dev/null +++ b/src/mainboard/technologic/ts_5300/romstage.c @@ -0,0 +1,169 @@ +/* + * TS5300 specific initialization code. + * written by Stefan Reinauer stepan@coresystems.de + * (c) 2006 coresystems GmbH + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include "cpu/x86/bist.h" + +#define TS5300_LED_OFF outb((inb(0x77)&0xfe), 0x77) +#define TS5300_LED_ON outb((inb(0x77)|1), 0x77) + +#define TS9500_LED_OFF outb((inb(0x19a)&0xfe), 0x19a) +#define TS9500_LED_ON outb((inb(0x19a)|1), 0x19a) + +/* PAR register setup */ +void setup_pars(void) +{ + volatile unsigned long *par; + par = (unsigned long *) 0xfffef088; + + /* NOTE: Ron says, move this to mainboard.c */ + *par++ = 0x00000000; + *par++ = 0x340f0070; + *par++ = 0x380701f0; + *par++ = 0x3c0103f6; + *par++ = 0x2c0f0300; + *par++ = 0x447c00a0; + *par++ = 0xe600000c; + *par++ = 0x300046e8; + *par++ = 0x500400d0; + *par++ = 0x281f0140; + *par++ = 0x00000000; + *par++ = 0x00000000; + *par++ = 0x00000000; + *par++ = 0x8a07c940; /* Flash setup */ + *par++ = 0x00000000; + *par++ = 0xee00400e; +} + +#include "cpu/amd/sc520/raminit.c" + +static void identify_ts9500(void) +{ + unsigned i, val; + + TS9500_LED_ON; + + print_err("TS-9500 add-on found:\n"); + val=inb(0x19b); + for (i=0; i<8; i++) { + print_err(" DIP"); + print_err_char(i+0x31); + print_err(": "); + if((val&(1<<i))!=0) + print_err("on\n"); + else + print_err("off\n"); + } + print_err("\n"); + + val=inb(0x19a); + + for (i=6; i<8; i++) { + print_err(" JP"); + print_err_char(i+0x30-5); + print_err(": "); + if((val&(1<<i))!=0) + print_err("on\n"); + else + print_err("off\n"); + } + print_err("\n"); + + TS9500_LED_OFF; +} + +static void identify_system(void) +{ + unsigned i,val; + + print_err("Mainboard: "); + val=inb(0x74); + switch(val) { + case 0x50: print_err("TS-5300\n"); break; + case 0x40: print_err("TS-5400\n"); break; + case 0x60: print_err("TS-5500\n"); break; + case 0x20: print_err("TS-5600\n"); break; + case 0x70: print_err("TS-5700\n"); break; + default: print_err("unknown\n"); break; + } + + val=inb(0x75); + print_err(" SRAM option: "); + if((val&1)==0) print_err("not "); + print_err("installed\n"); + + print_err(" RS-485 option: "); + if((val&2)==0) print_err("not "); + print_err("installed\n"); + + val=inb(0x76); + print_err(" Temp. range: "); + if((val&2)==0) print_err("commercial\n"); + else print_err("industrial\n"); + + print_err("\n"); + + val=inb(0x77); + for (i=1; i<8; i++) { + print_err(" JP"); + print_err_char(i+0x30); + print_err(": "); + if((val&(1<<i))!=0) + print_err("on\n"); + else + print_err("off\n"); + } + print_err("\n"); + + /* Detect TS-9500 */ + val=inb(0x19d); + if(val==0x5f) + identify_ts9500(); +} + +static void hard_reset(void) +{ + print_err("Hard reset called.\n"); + while (1) ; +} + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + volatile int i; + unsigned val; + + TS5300_LED_ON; + + // Let the hardware settle a bit. + for(i = 0; i < 100; i++) + ; + + setupsc520(); + console_init(); + + + print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/%5Cn"); + staticmem(); + +/* Void warranty when label is removed. */ +dummy_romcc_workaround_label: + do { } while (0); + + print_err("Memory initialized: 32MB\n"); + +#if 1 + identify_system(); +#endif + + TS5300_LED_OFF; +} diff --git a/src/mainboard/via/Kconfig b/src/mainboard/via/Kconfig index b1d9c54..5acb630 100644 --- a/src/mainboard/via/Kconfig +++ b/src/mainboard/via/Kconfig @@ -30,13 +30,13 @@ config BOARD_VIA_VT8454C endchoice
source "src/mainboard/via/epia/Kconfig" -source "src/mainboard/via/epia-cn/Kconfig" -source "src/mainboard/via/epia-m700/Kconfig" -source "src/mainboard/via/epia-m850/Kconfig" -source "src/mainboard/via/epia-m/Kconfig" -source "src/mainboard/via/epia-mii/Kconfig" -source "src/mainboard/via/epia-ml/Kconfig" -source "src/mainboard/via/epia-n/Kconfig" +source "src/mainboard/via/epia_cn/Kconfig" +source "src/mainboard/via/epia_m700/Kconfig" +source "src/mainboard/via/epia_m850/Kconfig" +source "src/mainboard/via/epia_m/Kconfig" +source "src/mainboard/via/epia_mii/Kconfig" +source "src/mainboard/via/epia_ml/Kconfig" +source "src/mainboard/via/epia_n/Kconfig" source "src/mainboard/via/pc2500e/Kconfig" source "src/mainboard/via/vt8454c/Kconfig"
diff --git a/src/mainboard/via/epia-cn/Kconfig b/src/mainboard/via/epia-cn/Kconfig deleted file mode 100644 index 266e7e9..0000000 --- a/src/mainboard/via/epia-cn/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if BOARD_VIA_EPIA_CN - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C7 - select NORTHBRIDGE_VIA_CN700 - select SOUTHBRIDGE_VIA_VT8237R - select SUPERIO_VIA_VT1211 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default via/epia-cn - -config MAINBOARD_PART_NUMBER - string - default "EPIA-CN" - -config IRQ_SLOT_COUNT - int - default 9 - -endif # BOARD_VIA_EPIA_CN diff --git a/src/mainboard/via/epia-cn/board_info.txt b/src/mainboard/via/epia-cn/board_info.txt deleted file mode 100644 index fbf0866..0000000 --- a/src/mainboard/via/epia-cn/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: mini -Board name: EPIA-CN10000EG / EPIA-CN13000G -Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... diff --git a/src/mainboard/via/epia-cn/cmos.layout b/src/mainboard/via/epia-cn/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/via/epia-cn/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/via/epia-cn/devicetree.cb b/src/mainboard/via/epia-cn/devicetree.cb deleted file mode 100644 index 028cb88..0000000 --- a/src/mainboard/via/epia-cn/devicetree.cb +++ /dev/null @@ -1,61 +0,0 @@ -chip northbridge/via/cn700 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - device pci f.0 on end # IDE - register "fn_ctrl_lo" = "0x80" - register "fn_ctrl_hi" = "0x1d" - device pci 10.0 on end # OHCI - device pci 10.1 on end # OHCI - device pci 10.2 on end # OHCI - device pci 10.3 on end # OHCI - device pci 10.4 on end # EHCI - device pci 10.5 on end # UDCI - device pci 11.0 on # Southbridge LPC - chip superio/via/vt1211 # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.b on # HWM - io 0x60 = 0xec00 - end - end - end - device pci 11.5 on end # AC'97 audio - # device pci 11.6 off end # AC'97 Modem - device pci 12.0 on end # Ethernet - end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end -end diff --git a/src/mainboard/via/epia-cn/irq_tables.c b/src/mainboard/via/epia-cn/irq_tables.c deleted file mode 100644 index 8b137ab..0000000 --- a/src/mainboard/via/epia-cn/irq_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 VIA Technologies, Inc. - * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, - PIRQ_VERSION, - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x11 << 3) | 0x0, /* Interrupt router device */ - 0xc20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x596, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x66, /* Checksum */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0e<<3)|0x0, {{0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/via/epia-cn/romstage.c b/src/mainboard/via/epia-cn/romstage.c deleted file mode 100644 index 20f99cb..0000000 --- a/src/mainboard/via/epia-cn/romstage.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 VIA Technologies, Inc. - * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <lib.h> -#include "northbridge/via/cn700/raminit.h" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "southbridge/via/vt8237r/early_smbus.c" -#include "southbridge/via/vt8235/early_serial.c" -#include <spd.h> - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/via/cn700/raminit.c" - -static void enable_mainboard_devices(void) -{ - device_t dev; - - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); - if (dev == PCI_DEV_INVALID) - die("Southbridge not found!!!\n"); - - /* bit=0 means enable function (per CX700 datasheet) - * 5 16.1 USB 2 - * 4 16.0 USB 1 - * 3 15.0 SATA and PATA - * 2 16.2 USB 3 - * 1 16.4 USB EHCI - */ - pci_write_config8(dev, 0x50, 0x80); - - /* bit=1 means enable internal function (per CX700 datasheet) - * 3 Internal RTC - * 2 Internal PS2 Mouse - * 1 Internal KBC Configuration - * 0 Internal Keyboard Controller - */ - pci_write_config8(dev, 0x51, 0x1d); -} - -static const struct mem_controller ctrl = { - .d0f0 = 0x0000, - .d0f2 = 0x2000, - .d0f3 = 0x3000, - .d0f4 = 0x4000, - .d0f7 = 0x7000, - .d1f0 = 0x8000, - .channel0 = { DIMM0 }, -}; - -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - /* Enable multifunction for northbridge. */ - pci_write_config8(ctrl.d0f0, 0x4f, 0x01); - - enable_vt8235_serial(); - console_init(); - enable_smbus(); - smbus_fixup(&ctrl); - report_bist_failure(bist); - enable_mainboard_devices(); - ddr_ram_setup(&ctrl); -} diff --git a/src/mainboard/via/epia-m/Kconfig b/src/mainboard/via/epia-m/Kconfig deleted file mode 100644 index 843b7f4..0000000 --- a/src/mainboard/via/epia-m/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -if BOARD_VIA_EPIA_M || BOARD_VIA_EPIA_MII || BOARD_VIA_EPIA_ML - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C3 - select NORTHBRIDGE_VIA_VT8623 - select SOUTHBRIDGE_VIA_VT8235 - select SOUTHBRIDGE_RICOH_RL5C476 - select SUPERIO_VIA_VT1211 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_256 - select ROMCC - select PER_DEVICE_ACPI_TABLES - -config MAINBOARD_DIR - string - default via/epia-m - -if BOARD_VIA_EPIA_M - -config MAINBOARD_PART_NUMBER - string - default "EPIA-M" - -endif # BOARD_VIA_EPIA_M - -config IRQ_SLOT_COUNT - int - default 5 - -endif # BOARD_VIA_EPIA_M || BOARD_VIA_EPIA_MII || BOARD_VIA_EPIA_ML diff --git a/src/mainboard/via/epia-m/acpi_tables.c b/src/mainboard/via/epia-m/acpi_tables.c deleted file mode 100644 index d02bac2..0000000 --- a/src/mainboard/via/epia-m/acpi_tables.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * coreboot ACPI Table support - * written by Stefan Reinauer stepan@openbios.org - * ACPI FADT, FACS, and DSDT table support added by - * Nick Barker nick.barker9@btinternet.com, and those portions - * (C) Copyright 2004 Nick Barker - * (C) Copyright 2005 Stefan Reinauer - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Nothing to do */ - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Nothing to do */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} diff --git a/src/mainboard/via/epia-m/board_info.txt b/src/mainboard/via/epia-m/board_info.txt deleted file mode 100644 index 3d084e0..0000000 --- a/src/mainboard/via/epia-m/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Category: mini -Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... -Flashrom support: y diff --git a/src/mainboard/via/epia-m/cmos.layout b/src/mainboard/via/epia-m/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/via/epia-m/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/via/epia-m/devicetree.cb b/src/mainboard/via/epia-m/devicetree.cb deleted file mode 100644 index 98f6b4f..0000000 --- a/src/mainboard/via/epia-m/devicetree.cb +++ /dev/null @@ -1,61 +0,0 @@ -chip northbridge/via/vt8623 - - device cpu_cluster 0 on - chip cpu/via/c3 - device lapic 0 on end - end - end - - device domain 0 on - - device pci 0.0 on end - device pci 1.0 on end - - chip southbridge/via/vt8235 - - device pci 10.0 on end # USB 1.1 - device pci 10.1 on end # USB 1.1 - device pci 10.2 on end # USB 1.1 - device pci 10.3 on end # USB 2 - - device pci 11.0 on # Southbridge - chip superio/via/vt1211 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.b on # HWM - io 0x60 = 0xec00 - end - - end - end - - device pci 11.1 on end # IDE - # 2-4 non existant? - device pci 11.5 on end # AC97 Audio - device pci 11.6 off end # AC97 Modem - device pci 12.0 on end # Ethernet - end -# This is on the EPIA MII, not the M. - chip southbridge/ricoh/rl5c476 - register "enable_cf" = "1" - device pci 0a.0 on end - device pci 0a.1 on end - end - end -end diff --git a/src/mainboard/via/epia-m/dsdt.asl b/src/mainboard/via/epia-m/dsdt.asl deleted file mode 100644 index d8553a2..0000000 --- a/src/mainboard/via/epia-m/dsdt.asl +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-M / MII - * (C) Copyright 2004 Nick Barker Nick.Barker9@btinternet.com - * - * - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) -{ - /* - * Define the main processor - */ - Scope (_PR) - { - Processor (_PR.CPU0, 0x00, 0x00000410, 0x06) {} - } - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * any others would involve declaring the wake up methods - */ - Name (_S0, Package () {0x00, 0x00, 0x00, 0x00 }) - Name (_S5, Package () {0x02, 0x02, 0x00, 0x00 }) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - /* Define how interrupt Link A is plumbed in */ - Device (LNKA) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - /* Status - always return ready */ - Method (_STA, 0, NotSerialized) - { - Return (0x0B) - } - /* Current Resources - return irq set up in BIOS */ - Method (_CRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5} - }) - Return (BUFF) - } - /* Possible Resources - return the range of irqs - * we are using for PCI - only here to keep Linux ACPI - * happy - */ - Method (_PRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5,9,10} - }) - Return (BUFF) - } - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized ) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - - } // End of LNKA - - /* Define how interrupt Link B is plumbed in */ - Device (LNKB) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - /* Status - always return ready */ - Method (_STA, 0, NotSerialized) - { - Return (0x0B) - } - /* Current Resources - return irq set up in BIOS */ - Method (_CRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {9} - }) - Return (BUFF) - } - /* Possible Resources - return the range of irqs - * we are using for PCI - only here to keep Linux ACPI - * happy - */ - Method (_PRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5,9,10} - }) - Return (BUFF) - } - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized ) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - - } // End of LNKB - - /* Define how interrupt Link C is plumbed in */ - Device (LNKC) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - /* Status - always return ready */ - Method (_STA, 0, NotSerialized) - { - Return (0x0B) - } - /* Current Resources - return irq set up in BIOS */ - Method (_CRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {9} - }) - Return (BUFF) - } - /* Possible Resources - return the range of irqs - * we are using for PCI - only here to keep Linux ACPI - * happy - */ - Method (_PRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5,9,10} - }) - Return (BUFF) - } - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized ) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - - } // End of LNKC - - /* Define how interrupt Link D is plumbed in */ - Device (LNKD) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - /* Status - always return ready */ - Method (_STA, 0, NotSerialized) - { - Return (0x0B) - } - /* Current Resources - return irq set up in BIOS */ - Method (_CRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5} - }) - Return (BUFF) - } - /* Possible Resources - return the range of irqs - * we are using for PCI - only here to keep Linux ACPI - * happy - */ - Method (_PRS, 0, NotSerialized) - { - Name (BUFF, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared) {5,9,10} - }) - Return (BUFF) - } - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized ) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - - } // End of LNKD - - - /* top PCI device */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - /* PCI Routing Table */ - Name (_PRT, Package () { - /* Epia-MII 6000e cardbus: */ - Package () {0x000AFFFF, 0x00, LNKA, 0x00}, // Cardbus Link A - Package () {0x000AFFFF, 0x01, LNKB, 0x00}, // Cardbus Link B - Package () {0x000AFFFF, 0x02, LNKC, 0x00}, // Cardbus Link C - Package () {0x000AFFFF, 0x03, LNKD, 0x00}, // Cardbus Link D - - Package () {0x000DFFFF, 0x00, LNKB, 0x00}, // Firewire Link B - Package () {0x000DFFFF, 0x01, LNKC, 0x00}, // Firewire Link C - Package () {0x000DFFFF, 0x02, LNKD, 0x00}, // Firewire Linc D - Package () {0x000DFFFF, 0x03, LNKA, 0x00}, // Firewire Link A - - Package () {0x0010FFFF, 0x00, LNKA, 0x00}, // USB Link A - Package () {0x0010FFFF, 0x01, LNKB, 0x00}, // USB Link B - Package () {0x0010FFFF, 0x02, LNKC, 0x00}, // USB Link C - Package () {0x0010FFFF, 0x03, LNKD, 0x00}, // USB Link D - - Package () {0x0011FFFF, 0x00, LNKA, 0x00}, // vt8623 Link A - Package () {0x0011FFFF, 0x01, LNKB, 0x00}, // vt8623 Link B - Package () {0x0011FFFF, 0x02, LNKC, 0x00}, // vt8623 Link C - Package () {0x0011FFFF, 0x03, LNKD, 0x00}, // vt8623 Link D - - Package () {0x0012FFFF, 0x00, LNKA, 0x00}, // LAN Link A - Package () {0x0012FFFF, 0x01, LNKB, 0x00}, // LAN Link B - Package () {0x0012FFFF, 0x02, LNKC, 0x00}, // LAN Link C - Package () {0x0012FFFF, 0x03, LNKD, 0x00}, // LAN Link D - - Package () {0x0013FFFF, 0x00, LNKA, 0x00}, // Riser slot LinkA - Package () {0x0013FFFF, 0x01, LNKB, 0x00}, // Riser slot LinkB - Package () {0x0013FFFF, 0x02, LNKC, 0x00}, // Riser slot LinkC - Package () {0x0013FFFF, 0x03, LNKD, 0x00}, // Riser slot LinkD - - Package () {0x0014FFFF, 0x00, LNKB, 0x00}, // Slot 1, Link B - Package () {0x0014FFFF, 0x01, LNKC, 0x00}, // Slot 1, Link C - Package () {0x0014FFFF, 0x02, LNKD, 0x00}, // Slot 1, Link D - Package () {0x0014FFFF, 0x03, LNKA, 0x00}, // Slot 1, Link A - - Package () {0x0001FFFF, 0x00, LNKA, 0x00}, // VGA Link A - Package () {0x0001FFFF, 0x01, LNKB, 0x00}, // VGA Link B - Package () {0x0001FFFF, 0x02, LNKC, 0x00}, // VGA Link C - Package () {0x0001FFFF, 0x03, LNKD, 0x00} // VGA Link D - - }) - - - } // End of PCI0 - - } // End of _SB - -} // End of Definition Block diff --git a/src/mainboard/via/epia-m/fadt.c b/src/mainboard/via/epia-m/fadt.c deleted file mode 100644 index 101ff19..0000000 --- a/src/mainboard/via/epia-m/fadt.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * (C) Copyright 2004 Nick Barker nick.barker9@btinternet.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <arch/acpi.h> - -void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ - acpi_header_t *header=&(fadt->header); - - memset((void *)fadt,0,sizeof(acpi_fadt_t)); - memcpy(header->signature,"FACP",4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id,OEM_ID,6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id,ASLC,4); - header->asl_compiler_revision=0; - - fadt->firmware_ctrl=(u32)facs; - fadt->dsdt=(u32)dsdt; - fadt->preferred_pm_profile=0; - fadt->sci_int=5; - fadt->smi_cmd = 0; - fadt->acpi_enable = 0; - fadt->acpi_disable = 0; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0x0; - - fadt->pm1a_evt_blk = 0x400; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = 0x404; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = 0x0; - fadt->pm_tmr_blk = 0x408; - fadt->gpe0_blk = 0x420; - fadt->gpe1_blk = 0x0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 0; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - fadt->p_lvl2_lat = 90; - fadt->p_lvl3_lat = 900; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 0; - fadt->duty_width = 1; - fadt->day_alrm = 125; - fadt->mon_alrm = 126; - fadt->century = 50; - fadt->iapc_boot_arch = 0x1; - fadt->flags = 0x4a5; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 4; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = 0x400; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 2; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = 0x404; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 4; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = 0x408; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 0; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = 0x420; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); - -} diff --git a/src/mainboard/via/epia-m/irq_tables.c b/src/mainboard/via/epia-m/irq_tables.c deleted file mode 100644 index 1f2634e..0000000 --- a/src/mainboard/via/epia-m/irq_tables.c +++ /dev/null @@ -1,34 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0xc20, /* IRQs devoted exclusively to PCI usage */ - 0, /* Vendor */ - 0, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x68, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x2, 0x0}, - {0x00,(0x0a<<3)|0x0, {{0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0x0deb8}}, 0x3, 0x0}, - {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x4, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/via/epia-m/romstage.c b/src/mainboard/via/epia-m/romstage.c deleted file mode 100644 index 3f2a0c4..0000000 --- a/src/mainboard/via/epia-m/romstage.c +++ /dev/null @@ -1,110 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <stdlib.h> -#include <console/console.h> -#include "northbridge/via/vt8623/raminit.h" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "lib/debug.c" -#include "southbridge/via/vt8235/early_smbus.c" -#include "southbridge/via/vt8235/early_serial.c" - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/via/vt8623/raminit.c" - -static void enable_mainboard_devices(void) -{ - device_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8235), 0); - - if (dev == PCI_DEV_INVALID) { - die("Southbridge not found!!!\n"); - } - pci_write_config8(dev, 0x50, 0x80); - pci_write_config8(dev, 0x51, 0x1f); -#if 0 - // This early setup switches IDE into compatibility mode before PCI gets - // a chance to assign I/Os - // movl $CONFIG_ADDR(0, 0x89, 0x42), %eax - // // movb $0x09, %dl - // movb $0x00, %dl - // PCI_WRITE_CONFIG_BYTE -#endif - /* we do this here as in V2, we can not yet do raw operations - * to pci! - */ - dev += 0x100; /* ICKY */ - - pci_write_config8(dev, 0x04, 7); - pci_write_config8(dev, 0x40, 3); - pci_write_config8(dev, 0x42, 0); - pci_write_config8(dev, 0x3c, 0xe); - pci_write_config8(dev, 0x3d, 0); -} - -static void enable_shadow_ram(void) -{ - device_t dev = 0; /* no need to look up 0:0.0 */ - unsigned char shadowreg; - /* dev 0 for southbridge */ - shadowreg = pci_read_config8(dev, 0x63); - /* 0xf0000-0xfffff */ - shadowreg |= 0x30; - pci_write_config8(dev, 0x63, shadowreg); -} - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - device_t dev; - - /* Enable VGA; 32MB buffer. */ - pci_write_config8(0, 0xe1, 0xdd); - - /* - * Disable the firewire stuff, which apparently steps on IO 0+ on - * reset. Doh! - */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_6305), 0); - if (dev != PCI_DEV_INVALID) - pci_write_config8(dev, 0x15, 0x1c); - - enable_vt8235_serial(); - console_init(); - - enable_smbus(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - // init_timer(); - - post_code(0x05); - - print_debug(" Enabling mainboard devices\n"); - enable_mainboard_devices(); - - print_debug(" Enabling shadow ram\n"); - enable_shadow_ram(); - - ddr_ram_setup((const struct mem_controller *)0); - - if (bist == 0) - early_mtrr_init(); - - //dump_pci_devices(); -} diff --git a/src/mainboard/via/epia-m700/Kconfig b/src/mainboard/via/epia-m700/Kconfig deleted file mode 100644 index 7d21038..0000000 --- a/src/mainboard/via/epia-m700/Kconfig +++ /dev/null @@ -1,28 +0,0 @@ -if BOARD_VIA_EPIA_M700 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C7 - select NORTHBRIDGE_VIA_VX800 - select SUPERIO_WINBOND_W83697HF - select HAVE_PIRQ_TABLE - # Note: For ACPI, you need to use the 'get_dsdt' script and uncomment - # the "select HAVE_ACPI_TABLES" line below. - # select HAVE_ACPI_TABLES - # select PER_DEVICE_ACPI_TABLES - select HAVE_OPTION_TABLE - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default via/epia-m700 - -config MAINBOARD_PART_NUMBER - string - default "EPIA-M700" - -config IRQ_SLOT_COUNT - int - default 13 - -endif # BOARD_VIA_EPIA_M700 diff --git a/src/mainboard/via/epia-m700/acpi_tables.c b/src/mainboard/via/epia-m700/acpi_tables.c deleted file mode 100644 index c841f2c..0000000 --- a/src/mainboard/via/epia-m700/acpi_tables.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * LinuxBIOS ACPI Table support - * written by Stefan Reinauer stepan@openbios.org - * ACPI FADT, FACS, and DSDT table support added by - * Nick Barker nick.barker9@btinternet.com, and those portions - * (C) Copyright 2004 Nick Barker - * (C) Copyright 2005 Stefan Reinauer - * (C) Copyright 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * Most parts of this file copied from asus\a8v-e_se\acpi_tables.c, - * acpi_is_wakeup() is from Rudolf's S3 patch and SSDT was added. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <device/device.h> -#include <device/pci_ids.h> -#include "northbridge/via/vx800/vx800.h" - -extern const unsigned char AmlCode_dsdt[]; -extern const unsigned char AmlCode_ssdt[]; - -extern u32 wake_vec; - -/* - * These four macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since - * mainboard/via/... have no mptable.c (so that I can not set - * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. - * So I have to copy these four to here. acpi_fill_madt() needs this. - */ -#define MP_IRQ_POLARITY_HIGH 0x1 -#define MP_IRQ_POLARITY_LOW 0x3 -#define MP_IRQ_TRIGGER_EDGE 0x4 -#define MP_IRQ_TRIGGER_LEVEL 0xc - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* NO MCFG in VX855, no PCI-E. */ - return current; -} - -unsigned long acpi_create_madt_lapic_nmis(unsigned long current, u16 flags, - u8 lint) -{ - device_t cpu; - int cpu_index = 0; - - for (cpu = all_devices; cpu; cpu = cpu->next) { - if ((cpu->path.type != DEVICE_PATH_APIC) || - (cpu->bus->dev->path.type != DEVICE_PATH_CPU_CLUSTER)) { - continue; - } - if (!cpu->enabled) - continue; - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, cpu_index, flags, lint); - cpu_index++; - } - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VX800SB_APIC_ID, VX800SB_APIC_BASE, 0); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - /* Not implemented. */ - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT. */ - return current; -} diff --git a/src/mainboard/via/epia-m700/board_info.txt b/src/mainboard/via/epia-m700/board_info.txt deleted file mode 100644 index 9204d80..0000000 --- a/src/mainboard/via/epia-m700/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: mini -Board URL: http://www.viaembedded.com/en/products/boards/670/1/EPIA-M700_%28EOL%29.html -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/via/epia-m700/cmos.layout b/src/mainboard/via/epia-m700/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/via/epia-m700/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb deleted file mode 100644 index 2f971c2..0000000 --- a/src/mainboard/via/epia-m700/devicetree.cb +++ /dev/null @@ -1,24 +0,0 @@ -chip northbridge/via/vx800 # Northbridge - device domain 0 on - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - # device pci f.0 on end # IDE/SATA - # device pci f.1 on end # IDE - # device pci 10.0 on end # USB 1.1 - # device pci 10.1 on end # USB 1.1 - # device pci 10.2 on end # USB 1.1 - # device pci 10.4 on end # USB 2.0 - # device pci 11.0 on # Southbridge LPC - # end - end - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c7 # VIA C7 - device lapic 0 on end # APIC - end - end -end diff --git a/src/mainboard/via/epia-m700/driving_clk_phase_data.c b/src/mainboard/via/epia-m700/driving_clk_phase_data.c deleted file mode 100644 index 6b0afa4..0000000 --- a/src/mainboard/via/epia-m700/driving_clk_phase_data.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "northbridge/via/vx800/driving_clk_phase_data.h" - -// DQS Driving -// Reg0xE0, 0xE1 -// According to #Bank to set DRAM DQS Driving -// #Bank 1 2 3 4 5 6 7 8 -static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE }; -static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE }; - -// DQ Driving -// Reg0xE2, 0xE3 -// For DDR2: According to bank to set DRAM DQ Driving -static const u8 DDR2_DQA_Driving_Table[4] = { 0xAC, 0xAC, 0xAC, 0xAC }; -static const u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA }; - -// CS Driving -// Reg0xE4, 0xE5 -// According to #Bank to set DRAM CS Driving -// DDR1 #Bank 1 2 3 4 5 6 7 8 -static const u8 DDR2_CSA_Driving_Table_x8[4] = { 0x44, 0x44, 0x44, 0x44 }; -static const u8 DDR2_CSB_Driving_Table_x8[2] = { 0x44, 0x44 }; -static const u8 DDR2_CSA_Driving_Table_x16[4] = { 0x44, 0x44, 0x44, 0x44 }; -static const u8 DDR2_CSB_Driving_Table_x16[2] = { 0x44, 0x44 }; - -// MAA Driving -// Reg0xE8, Reg0xE9 -static const u8 DDR2_MAA_Driving_Table[MA_Table][5] = { - // Chip number, 400, 533, 667 800 ;(SRAS, SCAS, SWE)RxE8 - {6, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 00 ~ 06 - {18, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 06 ~ 18 - {255, 0xDB, 0xDB, 0xDB, 0xDB}, // total MAA chips = 18 ~ -}; - -static const u8 DDR2_MAB_Driving_Table[MA_Table][2] = { - // Chip number, Value ;(SRAS, SCAS, SWE)RxE9 - {6, 0x86}, // total MAB chips = 00 ~ 06 - {18, 0x86}, // total MAB chips = 06 ~ 18 - {255, 0xDB}, // total MAB chips = 18 ~ -}; - -// DCLK Driving -// Reg0xE6, 0xE7 -// For DDR2: According to #Freq to set DRAM DCLK Driving -// freq 400M, 533M, 667M, 800M -static const u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; -static const u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; - -/* - * Duty cycle - * Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB - * D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF - * According to DRAM frequency to control Duty Cycle - */ -static const u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0xEC, 0x00, 0x30, 0x30, 0x30, 0x30}, // 1Rank - {0xEE, 0x0F, 0x40, 0x40, 0x00, 0x00}, - {0xEF, 0xCF, 0x00, 0x30, 0x30, 0x30}, -}; - -static const u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0xED, 0x00, 0x88, 0x88, 0x84, 0x88}, // 1Rank - {0xEE, 0xF0, 0x00, 0x00, 0x00, 0x00}, - {0xEF, 0xFC, 0x00, 0x00, 0x00, 0x00}, -}; - -/* - * DRAM Clock Phase Control for FeedBack Mode - * Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94 - * Processing: - * 1. Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode. - * 2. Program clock phase value with ChA/B DCLK enable, - * VIA_NB3DRAM_REG91[7:3]=00b - * 3. Check ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO - * ChA DCLKO can't be disabled, so always program VIA_NB3DRAM_REG91[3]=0b. - */ -static const u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank - {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02}, - {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03}, -}; - -static const u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x91, 0x0F, 0x20, 0x10, 0x00, 0x70}, // 1Rank - {0x92, 0x0F, 0x40, 0x30, 0x30, 0x20}, - {0x93, 0x0F, 0x60, 0x50, 0x40, 0x30}, -}; - -/* vt6413c */ -#if 0 -static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x91, 0xF8, 0x04, 0x03, 0x04, 0x01 }, // 1Rank - {0x92, 0xF8, 0x03, 0x06, 0x05, 0x04 }, - {0x93, 0xF8, 0x03, 0x07, 0x06, 0x05 }, -}; -#endif - -/* vt6413d */ -static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank - {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02}, - {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03}, -}; - -/* - * DRAM Write Data phase control - * Modify NB Reg: Rx74/Rx75/Rx76 - */ -/* vt6413c */ -#if 0 -static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x74, 0xF8, 0x03, 0x04, 0x05, 0x02 }, // 1Rank - {0x75, 0xF8, 0x03, 0x04, 0x05, 0x02 }, - {0x76, 0x00, 0x10, 0x80, 0x00, 0x07 }, -}; -#endif - -/* vt6413D */ -static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM][WrtData_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x74, 0xF8, 0x01, 0x00, 0x00, 0x07}, // 1Rank - {0x75, 0xF8, 0x01, 0x00, 0x00, 0x07}, - {0x76, 0x10, 0x80, 0x87, 0x07, 0x06}, - {0x8C, 0xFC, 0x03, 0x03, 0x03, 0x03}, -}; - -#if 0 -static const u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 }, // 1Rank - {0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 }, - {0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 }, -}; -#endif - -/* - * DQ/DQS Output Delay Control - * Modify NB D0F3: RxF0/RxF1/RxF2/RxF3 - */ -static const u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = { - //RxF0 RxF1 RxF2 RxF3 - {0x00, 0x00, 0x00, 0x00}, /* DDR400 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR533 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR667 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR800 */ -}; - -static const u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = { - //RxF4 RxF5 RxF6 RxF7 - {0x00, 0x00, 0x00, 0x00}, /* DDR400 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR533 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR667 */ - {0x00, 0x00, 0x00, 0x00}, /* DDR800 */ -}; - -/* - * DQ/DQS input Capture Control - * modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B - */ -/* vt6413C */ -#if 0 -static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x78, 0x00, 0x83, 0x8D, 0x87, 0x83 }, // 1Rank - {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 }, - {0x7B, 0x00, 0x10, 0x30, 0x20, 0x10 } -}; -#endif - -/* vt6413D */ -static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x78, 0xC0, 0x0D, 0x07, 0x03, 0x01}, // 1Rank - {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00}, - {0x7B, 0x00, 0x34, 0x34, 0x20, 0x10} -}; - -static const u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = { - // (And NOT) DDR800 DDR667 DDR533 DDR400 - //Reg Mask Value Value Value Value - {0x79, 0x00, 0x89, 0x89, 0x87, 0x83}, // 1Rank - {0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00}, - {0x8B, 0x00, 0x34, 0x34, 0x20, 0x10} -}; - -static const u8 Fixed_DQSA_1_2_Rank_Table[4][2] = { - //Rx70 Rx71 - {0x00, 0x05}, /* DDR800 */ - {0x00, 0x06}, /* DDR667 */ - {0x00, 0x04}, /* DDR533 */ - {0x00, 0x05}, /* DDR400 */ -}; - -static const u8 Fixed_DQSA_3_4_Rank_Table[4][2] = { - //Rx70 Rx71 - {0x00, 0x04}, /* DDR800 */ - {0x00, 0x04}, /* DDR667 */ - {0x00, 0x03}, /* DDR533 */ - {0x00, 0x04}, /* DDR400 */ -}; diff --git a/src/mainboard/via/epia-m700/fadt.c b/src/mainboard/via/epia-m700/fadt.c deleted file mode 100644 index 7a1d944..0000000 --- a/src/mainboard/via/epia-m700/fadt.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - * - * Copyright (C) 2004 Nick Barker nick.barker9@btinternet.com - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <string.h> -#include <arch/acpi.h> -#include "northbridge/via/vx800/vx800.h" - -void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - fadt->firmware_ctrl = (u32)facs; - fadt->dsdt = (u32)dsdt; - fadt->preferred_pm_profile = 0; - fadt->sci_int = 0x9; - - fadt->smi_cmd = VX800_ACPI_IO_BASE + 0x2F; - fadt->acpi_enable = 0xA1; - fadt->acpi_disable = 0xA0; - - /* - * Value 42F,A1,A0, if we don't want SMI, then set them to zero. - * fadt->smi_cmd = 0x0; - * fadt->acpi_enable = 0x0; - * fadt->acpi_disable = 0x0; - */ - - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0x0; - - fadt->pm1a_evt_blk = VX800_ACPI_IO_BASE; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = VX800_ACPI_IO_BASE + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = 0x22; /* To support cpu-c3. */ - /* fadt->pm2_cnt_blk = 0x0; */ - fadt->pm_tmr_blk = VX800_ACPI_IO_BASE + 0x8; - fadt->gpe0_blk = VX800_ACPI_IO_BASE + 0x20; - fadt->gpe1_blk = VX800_ACPI_IO_BASE + 0x50; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; /* To support cpu-c3. */ - /* fadt->pm2_cnt_len = 0; */ - - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 4; - fadt->gpe1_blk_len = 4; - fadt->gpe1_base = 0x10; - fadt->cst_cnt = 0; - - fadt->p_lvl2_lat = 0x50; /* This is the coreboot source. */ - fadt->p_lvl3_lat = 0x320; - /* fadt->p_lvl2_lat = 0x80; */ - /* fadt->p_lvl3_lat = 0x800; */ - /* fadt->p_lvl2_lat = 0x1; */ - /* fadt->p_lvl3_lat = 0x23; */ - - /* fadt->p_lvl2_lat = 0x200; */ /* Disable. */ - /* fadt->p_lvl3_lat = 0x2000; */ - - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 0; - /* fadt->duty_width = 1; */ - fadt->duty_width = 4; - fadt->day_alrm = 0x7d; - fadt->mon_alrm = 0x7e; - fadt->century = 0x32; - fadt->iapc_boot_arch = 0x0; - fadt->flags = 0xa5; - - fadt->reset_reg.space_id = 0; - fadt->reset_reg.bit_width = 0; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0x0; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 0; - fadt->x_firmware_ctl_l = (u32)facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32)dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 4; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = VX800_ACPI_IO_BASE; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 2; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = VX800_ACPI_IO_BASE + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - /* fadt->x_pm2_cnt_blk.space_id = 1; */ - fadt->x_pm2_cnt_blk.space_id = 0; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = 0x0; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 4; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = VX800_ACPI_IO_BASE + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 0; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = VX800_ACPI_IO_BASE + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/via/epia-m700/get_dsdt b/src/mainboard/via/epia-m700/get_dsdt deleted file mode 100755 index bd077c2..0000000 --- a/src/mainboard/via/epia-m700/get_dsdt +++ /dev/null @@ -1,43 +0,0 @@ -#!/bin/bash -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 One Laptop per Child, Association, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# Simple script to dump the factory ACPI DSDT and convert it to C. -# Must be run as root on some systems, and always run on the target machine. - -if [ ! iasl ]; then - echo "Intel ASL Compiler required to recompile DSDT table." -fi - -if [ ! -f /proc/acpi/dsdt ]; then - echo "Cannot find DSDT table, check that your kernel supports and uses ACPI." -fi - -cat /proc/acpi/dsdt > dsdt -if [ ! -f dsdt ]; then - echo "Failed copying DSDT, please check your permissions." -fi - -iasl -d -vr -vs dsdt -iasl -tc -vr -vs dsdt.dsl -mv dsdt.hex dsdt.c -echo "Done, cleaning up." -rm -f dsdt dsdt.dsl dsdt.aml dsdt.hex -exit diff --git a/src/mainboard/via/epia-m700/irq_tables.c b/src/mainboard/via/epia-m700/irq_tables.c deleted file mode 100644 index 7cb4623..0000000 --- a/src/mainboard/via/epia-m700/irq_tables.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x11 << 3) | 0x0, /* Where the interrupt router lies (dev) */ - 0xca0, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x596, /* Device */ - 0, /* Miniport */ - {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ - 0xdb, /* Checksum. 0xa0? */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x1, 0x0}, - {0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x2, 0x0}, - {0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x3, 0x0}, - {0x04, (0x04 << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}}, 0x4, 0x0}, - {0x04, (0x0e << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x5, 0x0}, - {0x00, (0x11 << 3) | 0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x0f << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x01 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x10 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, - {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - } -}; - -inline unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c deleted file mode 100644 index b00ece1..0000000 --- a/src/mainboard/via/epia-m700/romstage.c +++ /dev/null @@ -1,666 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * Part of this file is from cx700 port, part of is from cn700 port, - * and acpi_is_wakeup_early_via_VX800() is part of Rudolf's S3 patch. - */ - -#define PAYLOAD_IS_SEABIOS 0 - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <lib.h> -#include "northbridge/via/vx800/vx800.h" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include <string.h> -/* This file contains the board-special SI value for raminit.c. */ -#include "driving_clk_phase_data.c" -#include "northbridge/via/vx800/raminit.h" -#include "northbridge/via/vx800/raminit.c" -#include "wakeup.h" -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83697hf/w83697hf.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -/* - * This acpi_is_wakeup_early_via_VX800 is from Rudolf's patch on the list: - * http://www.coreboot.org/pipermail/coreboot/2008-January/028787.html. - */ -static int acpi_is_wakeup_early_via_vx800(void) -{ - device_t dev; - u16 tmp, result; - - print_debug("In acpi_is_wakeup_early_via_vx800\n"); - /* Power management controller */ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VX855_LPC), 0); - - if (dev == PCI_DEV_INVALID) - die("Power management controller not found\n"); - - /* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1); - - /* Enable ACPI access RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); - - tmp = inw(VX800_ACPI_IO_BASE + 0x04); - result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; - print_debug(" boot_mode="); - print_debug_hex16(result); - print_debug("\n"); - return result; -} - -/* All content of this function came from the cx700 port of coreboot. */ -static void enable_mainboard_devices(void) -{ - device_t dev; -#if 0 - /* - * Add and close this switch, since some line cause error, some - * written at elsewhere (stage1 stage2). - */ - u8 regdata; - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VX855_LPC), 0); - - /* Disable GP3. */ - pci_write_config8(dev, 0x98, 0x00); - - pci_write_config8(dev, 0x50, 0x80); /* Disable mc97. */ - - /* - * Martin: Disable internal KBC configuration. - * - * Internal Config is needed to decide which key can be pressed to - * resume from s3. - */ - pci_write_config8(dev, 0x51, 0x2d); - - /* This causes irq0 can not be triggerd, since bit 5 was set to 0. */ - /* pci_write_config8(dev, 0x58, 0x42); */ - - /* These writing may... TODO */ - regdata = pci_read_config8(dev, 0x58); - regdata |= 0x41; - pci_write_config8(dev, 0x58, regdata); - pci_write_config8(dev, 0x59, 0x80); - pci_write_config8(dev, 0x5b, 0x01); -#endif - - print_debug("In enable_mainboard_devices\n"); - - /* Enable P2P Bridge Header for external PCI bus. */ - dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0); - pci_write_config8(dev, 0x4f, 0x41); - - /* - * "5324" already is the default value of the PCI IDE device, cancel - * this PCI write. - * - * [william 20080124]: Fix bug that can not boot Ubuntu at the - * beginning time. - */ -#if 0 - dev = 0; - dev = pci_locate_device(PCI_ID(0x1106, PCI_DEVICE_ID_VIA_VX855_IDE), 0); - - uint16_t values; - values = pci_read_config16(dev, 0xBA); - values &= ~0xffff; - values |= 0x5324; - pci_write_config16(dev, 0xBA, values); -#endif -} - -/* - * Most content of this function came from the cx700 port of coreboot. - * Turn on the shadow of E-seg. - */ -static void enable_shadow_ram(void) -{ - uint8_t shadowreg; - - /* - * Changed the value from 0x2a to 0x3f. "read only" may block "write"? - * and maybe in C-seg "write" will be needed? - */ - pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff); - - /* 0xf0000-0xfffff - ACPI tables */ - shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83); - shadowreg |= 0x30; - pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg); - - /* 0xe0000-0xeffff - elfload? */ - /* - * In s3 resume process, wakeup.c, I use E-seg to hold the code - * (which can not locate in the area to be covered) that will copy - * 0-A-seg and F-seg from TOP-mem back to their normal location. - */ - pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff); - -#if 0 - /* Enable shadow RAM as normal DRAM */ - /* 0xc0000-0xcffff - VGA BIOS */ - pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0x2a); - pci_write_config8(PCI_DEV(0, 0, 7), 0x61, 0x00); - /* 0xd0000-0xdffff - ?? */ - /* pci_write_config8(PCI_DEV(0, 0, 3), 0x81, 0xff); */ - /* pci_write_config8(PCI_DEV(0, 0, 7), 0x62, 0xff); */ - - /* Do it again for the vlink controller. */ - shadowreg = pci_read_config8(PCI_DEV(0, 0, 7), 0x63); - shadowreg |= 0x30; - pci_write_config8(PCI_DEV(0, 0, 7), 0x63, shadowreg); -#endif -} - -/* - * Added this table 2008-11-28. - * This table contains the value needed to be set before begin to init DRAM. - * Note: REV_Bx should be checked for changes when porting a new board! - */ -static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = { - /* VT3409 no PCI-E */ - { 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E }, // Set Exxxxxxx as pcie mmio config range - { 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B }, // Support extended cfg address of pcie - // {Â 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control - // Set ROMSIP value by software - - /* - { 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pullup Driving = 3 - { 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pulldown Driving = 3 - { 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pullup Driving = 3 - { 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pulldown Driving = 3 - { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21 }, // Memory I/F timing ctrl - { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1 }, // Memory I/F timing ctrl - { 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18 }, // AGTL+ I/O Circuit - { 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C }, // AGTL+ Compensation Status - { 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33 }, // 2X AGTL+ Auto Compensation Offset - { 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33 }, // 4X AGTL+ Auto Compensation Offset - { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72 }, // AGTL Compensation Status - { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77 }, // AGTL Compensation Status - { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44 }, // Input Host Address / Host Strobe Delay Control for HA Group - { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22 }, // Input Host Address / Host Strobe Delay Control for HA Group - { 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00 }, // Output Delay Control of PAD for HA Group - { 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA }, // Host Address / Address Clock Output Delay Control (Only for P4 Bus) - { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - { 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 1 - { 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 2 - { 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00 }, // Output Delay of PAD for HDSTB - { 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00 }, // Output Delay of PAD for HD - { 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 0) - { 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 1) - { 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 2) - { 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 3) - */ - - // CPU Host Bus Control - { 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08 }, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8 - // { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW - { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW - { 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB }, // CPU I/F Ctrl-2: Enable all for performance - // { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88 }, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK - { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44 }, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK - { 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C }, // Misc Ctrl: Enable 8QW burst Mem Access - // { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06 }, // Miscellaneous Control 2 - { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04 }, // Miscellaneous Control 2 - { 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63 }, // Write Policy 1 - // { 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01 }, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL - // { 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00 }, // CPU Miscellaneous Control 2 - { 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2 }, // Write Policy - { 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88 }, // Bandwidth Timer - { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46 }, // CPU Misc Ctrl - // { 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B }, // CPU Miscellaneous Control 3 - // { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B }, // CPU Miscellaneous Control 2 - { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A }, // CPU Miscellaneous Control 2 - { 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41 }, // CPU Miscellaneous Control 3 - { 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06 }, // CPU Miscellaneous Control 4 - - // Set APIC and SMRAM - { 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00 }, // APIC Related Control - { 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29 }, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg - { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } // End of the table -}; - -#define USE_VCP 1 /* 0 means "use DVP". */ -#define USE_COM1 1 -#define USE_COM2 0 - -#define gCom1Base 0x3f8 -#define gCom2Base 0x2f8 - -#if 0 -static void EmbedComInit(void) -{ - u8 ByteVal; - u16 ComBase; - - /* Enable NB multiple function control. */ - ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f); - ByteVal = ByteVal | 0x01; - pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal); - - /* VGA enable. */ - ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1); - ByteVal = ByteVal | 0x80; - pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal); - - ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7); - ByteVal = ByteVal | 0x08; - pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal); - - /* Enable P2P IO/mem. */ - ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4); - ByteVal = ByteVal | 0x07; - pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal); - - /* Turn on graphic chip I/O port port access. */ - ByteVal = inb(0x3C3); - ByteVal = ByteVal | 0x01; - outb(ByteVal, 0x3C3); - - /* Turn off graphic chip register protection. */ - outb(0x10, 0x3C4); - ByteVal = inb(0x3C5); - ByteVal = ByteVal | 0x01; - outb(ByteVal, 0x3C5); - - /* South module pad share enable 0x3C5.78[7]. */ - outb(0x78, 0x3C4); - ByteVal = inb(0x3C5); - ByteVal = ByteVal | 0x80; - outb(ByteVal, 0x3C5); - - /* Enable UART function multiplex with DVP or VCP pad D17F0Rx46[7,6]. */ - ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46); - if (USE_VCP == 1) - ByteVal = (ByteVal & 0x3F) | 0x40; /* Multiplex with VCP. */ - else - ByteVal = (ByteVal & 0x3F) | 0xC0; /* Multiplex with DVP. */ - pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal); - - /* Enable embedded COM1 and COM2 D17F0RxB0[5,4]. */ - ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0); - ByteVal = ByteVal & 0xcf; - /* Multiplex with VCP. */ - if (USE_COM1 == 1) - ByteVal = ByteVal | 0x10; - if (USE_COM2 == 1) - ByteVal = ByteVal | 0x20; - pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal); - - if (USE_COM1 == 1) - ComBase = gCom1Base; - else - ComBase = gCom2Base; - -//noharddrive - - /* Set embedded COM1 I/O base = 0x3E8 (D17F0RB4, ByteVal = 0xFD) */ - if (USE_COM1 == 1) { - ByteVal = (u8) ((gCom1Base >> 3) | 0x80); - pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal); - ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); - ByteVal = (ByteVal & 0xf0) | 0x04; - pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); - } - - /* Set embedded COM2 I/O base = 0x2E8 (D17F0RB5, ByteVal = 0xDD). */ - if (USE_COM2 == 1) { - ByteVal = (u8) ((gCom2Base >> 3) | 0x80); - pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal); - ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); - ByteVal = (ByteVal & 0x0f) | 0x30; - pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); - } - /* No port 80 biger then 0x10. */ - - /* Disable interrupt. */ - ByteVal = inb(ComBase + 3); - outb(ByteVal & 0x7F, ComBase + 3); - outb(0x00, ComBase + 1); - - /* Set BAUD rate. */ - ByteVal = inb(ComBase + 3); - outb(ByteVal | 0x80, ComBase + 3); - outb(0x01, ComBase); - outb(0x00, ComBase + 1); - - /* Set frame format. */ - ByteVal = inb(ComBase + 3); - outb(ByteVal & 0x3F, ComBase + 3); - outb(0x03, ComBase + 3); - outb(0x00, ComBase + 2); - outb(0x00, ComBase + 4); - - /* SOutput("Embedded COM output\n"); */ - /* while(1); */ -} -#endif - -/* cache_as_ram.inc jumps to here. */ -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u16 boot_mode; - u8 rambits, Data8, Data; - device_t device; - /* device_t dev; */ - - /* - * Enable multifunction for northbridge. These 4 lines (until - * console_init()) are the same with epia-cn port. - */ - pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01); - /* EmbedComInit(); */ - w83697hf_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - /* enable_vx800_serial(); */ - - /* - * 1. D15F0 - * a) RxBAh = 71h - * b) RxBBh = 05h - * c) RxBEh = 71h - * d) RxBFh = 05h - * - * 2. D17F0 - * a) RxA0h = 06h - * b) RxA1h = 11h - * c) RxA2h = 27h - * d) RxA3h = 32h - * e) Rx79h = 40h - * f) Rx72h = 27h - * g) Rx73h = 32h - */ - - pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA, - PCI_DEVICE_ID_VIA_VX855_IDE); - pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE, - PCI_DEVICE_ID_VIA_VX855_IDE); - pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA); - pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2, - PCI_DEVICE_ID_VIA_VX855_LPC); - Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79); - Data8 &= ~0x40; - Data8 |= 0x40; - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8); - pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72, - PCI_DEVICE_ID_VIA_VX855_LPC); - - /* - * There are two function definitions of console_init(), while the - * src/arch/x86/lib is the right one. - */ - console_init(); - - /* Decide if this is a s3 wakeup or a normal boot. */ - boot_mode = acpi_is_wakeup_early_via_vx800(); - - /* - * 2008-11-27 Add this, to transfer "cpu restart" to "cold boot". - * When this boot is not a S3 resume, and PCI registers had been - * written, then this must be a CPU restart (result of OS reboot cmd), - * so we need a real "cold boot". - */ - if ((boot_mode != 3) - && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) { - outb(6, 0xcf9); - } - - /* x86 cold boot I/O cmd. */ - /* These 2 lines are the same with epia-cn port. */ - enable_smbus(); - - /* This fix does help vx800!, but vx855 doesn't need this. */ - /* smbus_fixup(&ctrl); */ - - /* Halt if there was a built-in self test failure. */ - report_bist_failure(bist); - - print_debug("Enabling mainboard devices\n"); - enable_mainboard_devices(); - - /* - * Get NB chip revision from D0F4RxF6, revision will be used in - * via_pci_inittable. - */ - device = PCI_DEV(0, 0, 4); - Data = pci_read_config8(device, 0xf6); - print_debug("NB chip revision ="); - print_debug_hex8(Data); - print_debug("\n"); - - /* Make NB ready before DRAM init. */ - via_pci_inittable(Data, mNbStage1InitTbl); - - /* - * When resume from s3, DRAM init is skipped, so need to recovery - * any PCI register related to DRAM init. d0f3 didn't lose its power - * during whole s3 time, so any register not belonging to d0f3 needs - * to be recovered. - */ -#if 1 - if (boot_mode == 3) { - u8 i; - u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; - DRAM_SYS_ATTR DramAttr; - - print_debug("This is an S3 wakeup\n"); - - memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); - /* - * Step 1: DRAM detection; DDR1 or DDR2; Get SPD Data; - * Rank Presence; 64 or 128bit; Unbuffered or registered; - * 1T or 2T. - */ - DRAMDetect(&DramAttr); - - /* - * Begin to get RAM size, 43,42 41 40 contains the end - * address of last rank in DDR2 slot. - */ - device = PCI_DEV(0, 0, 3); - for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { - rambits = pci_read_config8(device, ramregs[i]); - if (rambits != 0) - break; - } - - DRAMDRDYSetting(&DramAttr); - - Data = 0x80; /* This value is same with DevInit.c. */ - pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data); - pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2); - Data = pci_read_config8(MEMCTRL, 0x88); - pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data); - - /* Just copy this function from draminit to here! */ - DRAMRegFinalValue(&DramAttr); - - /* Just copy this function from draminit to here! */ - SetUMARam(); - - print_debug("Resume from S3, RAM init was ignored\n"); - } else { - ddr2_ram_setup(); - ram_check(0, 640 * 1024); - } -#endif - - /* ddr2_ram_setup(); */ - /* This line is the same with cx700 port. */ - enable_shadow_ram(); - - /* - * For coreboot most time of S3 resume is the same as normal boot, - * so some memory area under 1M become dirty, so before this happen, - * I need to backup the content of mem to top-mem. - * - * I will reserve the 1M top-men in LBIO table in coreboot_table.c - * and recovery the content of 1M-mem in wakeup.c. - */ -#if PAYLOAD_IS_SEABIOS == 1 - if (boot_mode == 3) { - /* An idea of Libo.Feng at amd.com in http://www.coreboot.org/pipermail/coreboot/2008-December/043111.html - * - * I want move the 1M data, I have to set some MTRRs myself. - * Setting MTRR before back memory save s3 resume time about - * 0.14 seconds. - * - * !!! Since CAR stack uses cache, and we are using cache - * here, we must be careful: - * - * 1. during this MTRR code, must no function call (after - * this MTRR, I think it should be OK to use function). - * 2. Before stack switch, no use variable that have value - * set before this. - * 3. Due to 2, take care of "cpu_reset", I directlly set it - * to ZERO. - */ - u32 memtop = *(u32 *) WAKE_MEM_INFO; - u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000; - u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000; - u32 memtop3 = *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000; - u32 memtop4 = - *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 + 0xe0000; -#if 0 - __asm__ volatile ( - "movl $0x204, %%ecx\n\t" - "xorl %%edx, %%edx\n\t" - "movl %0,%%eax\n\t" - "orl $(0 | 6), %%eax\n\t" - "wrmsr\n\t" - - "movl $0x205, %%ecx\n\t" - "xorl %%edx, %%edx\n\t" - "movl $0x100000,%%eax\n\t" - "decl %%eax\n\t" - "notl %%eax\n\t" - "orl $(0 | 0x800), %%eax\n\t" - "wrmsr\n\t" - ::"g"(memtop2) - ); - - __asm__ volatile ( - "movl $0x206, %%ecx\n\t" - "xorl %%edx, %%edx\n\t" - "movl %0,%%eax\n\t" - "orl $(0 | 6), %%eax\n\t" - "wrmsr\n\t" - - "movl $0x207, %%ecx\n\t" - "xorl %%edx, %%edx\n\t" - "movl $0x100000,%%eax\n\t" - "decl %%eax\n\t" - "notl %%eax\n\t" - "orl $(0 | 0x800), %%eax\n\t" - "wrmsr\n\t" - ::"g"(memtop1) - ); - - __asm__ volatile ( - "movl $0x208, %ecx\n\t" - "xorl %edx, %edx\n\t" - "movl $0,%eax\n\t" - "orl $(0 | 6), %eax\n\t" - "wrmsr\n\t" - - "movl $0x209, %ecx\n\t" - "xorl %edx, %edx\n\t" - "movl $0x100000,%eax\n\t" - "decl %eax\n\t" - "notl %eax\n\t" - "orl $(0 | 0x800), %eax\n\t" - "wrmsr\n\t" - ); -#endif - - /* - * WAKE_MEM_INFO is inited in get_set_top_available_mem() - * in tables.c these two memcpy() not not be enabled if set - * the MTRR around this two lines. - */ -#if 0 - __asm__ volatile ( - "movl $0, %%esi\n\t" - "movl %0, %%edi\n\t" - "movl $0xa0000, %%ecx\n\t" - "shrl $2, %%ecx\n\t" - "rep movsd\n\t" - ::"g"(memtop3) - ); - - __asm__ volatile ( - "movl $0xe0000, %%esi\n\t" - "movl %0, %%edi\n\t" - "movl $0x20000, %%ecx\n\t" - "shrl $2, %%ecx\n\t" - "rep movsd\n\t" - ::"g"(memtop4) - ); -#endif - /* This can have function call, because no variable used before this. */ - print_debug("Copy memory to high memory to protect s3 wakeup vector code\n"); - memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - - 0x100000), (unsigned char *)0, 0xa0000); - memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - - 0x100000 + 0xe0000), (unsigned char *)0xe0000, 0x20000); - - /* Restore the MTRR previously modified. */ -#if 0 - __asm__ volatile ( - "wbinvd\n\t" - "xorl %edx, %edx\n\t" - "xorl %eax, %eax\n\t" - "movl $0x204, %ecx\n\t" - "wrmsr\n\t" - "movl $0x205, %ecx\n\t" - "wrmsr\n\t" - "movl $0x206, %ecx\n\t" - "wrmsr\n\t" - "movl $0x207, %ecx\n\t" - "wrmsr\n\t" - "movl $0x208, %ecx\n\t" - "wrmsr\n\t" - "movl $0x209, %ecx\n\t" - "wrmsr\n\t" - ); -#endif - } -#endif -} diff --git a/src/mainboard/via/epia-m700/wakeup.c b/src/mainboard/via/epia-m700/wakeup.c deleted file mode 100644 index 28b8911..0000000 --- a/src/mainboard/via/epia-m700/wakeup.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* FIXME This code should be dropped and instead the generic resume code - * should be used. - */ - -/* Parts of this code is taken from reboot.c from Linux. */ - -/* - * This file mostly copied from Rudolf's S3 patch, some changes in - * acpi_jump_wake(). - */ - -#include <stdint.h> -#include <string.h> -#include <arch/io.h> -#include <console/console.h> -#include <delay.h> -#include "wakeup.h" - -int enable_a20(void); - -/* - * The following code and data reboots the machine by switching to real - * mode and jumping to the BIOS reset entry point, as if the CPU has - * really been reset. The previous version asked the keyboard - * controller to pulse the CPU reset line, which is more thorough, but - * doesn't work with at least one type of 486 motherboard. It is easy - * to stop this code working; hence the copious comments. - */ - -static unsigned long long real_mode_gdt_entries[3] = { - 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ -}; - -struct Xgt_desc_struct { - unsigned short size; - unsigned long address __attribute__ ((packed)); - unsigned short pad; -} __attribute__ ((packed)); - -static struct Xgt_desc_struct real_mode_gdt = { - sizeof(real_mode_gdt_entries) - 1, - (long)real_mode_gdt_entries -}, -real_mode_idt = {0x3ff, 0}, -no_idt = { 0, 0 }; - -/* - * This is 16-bit protected mode code to disable paging and the cache, - * switch to real mode and jump to the BIOS reset code. - * - * The instruction that switches to real mode by writing to CR0 must be - * followed immediately by a far jump instruction, which set CS to a - * valid value for real mode, and flushes the prefetch queue to avoid - * running instructions that have already been decoded in protected - * mode. - * - * Clears all the flags except ET, especially PG (paging), PE - * (protected-mode enable) and TS (task switch for coprocessor state - * save). Flushes the TLB after paging has been disabled. Sets CD and - * NW, to disable the cache on a 486, and invalidates the cache. This - * is more like the state of a 486 after reset. I don't know if - * something else should be done for other chips. - * - * More could be done here to set up the registers as if a CPU reset had - * occurred; hopefully real BIOSs don't assume much. - */ - -// 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000, %eax */ - -static unsigned char real_mode_switch[] = { - 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ - 0x24, 0xfe, /* andb $0xfe,al */ - 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ -}; - -static unsigned char jump_to_wakeup[] = { - 0xea, 0x00, 0x00, 0x00, 0xe0 /* ljmp $0xffff, $0x0000 */ -}; - -void acpi_jump_wake(u32 vector) -{ - u32 dwEip; - struct Xgt_desc_struct *wake_thunk16_Xgt_desc; - - printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO %x\n", vector); - if (enable_a20()) - die("failed to enable A20\n"); - printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO 3 %x\n", vector); - - *((u16 *) (jump_to_wakeup + 3)) = (u16) (vector >> 4); - printk(BIOS_DEBUG, "%x %x %x %x %x\n", jump_to_wakeup[0], jump_to_wakeup[1], - jump_to_wakeup[2], jump_to_wakeup[3], jump_to_wakeup[4]); - - memcpy((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100), - real_mode_switch, sizeof(real_mode_switch)); - memcpy((void *)(WAKE_THUNK16_ADDR - 100), jump_to_wakeup, - sizeof(jump_to_wakeup)); - - //jason_tsc_count(); - printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); - //jason_tsc_count_end(); - - unsigned long long *real_mode_gdt_entries_at_eseg; - real_mode_gdt_entries_at_eseg = (void *)WAKE_THUNK16_GDT; /* Copy from real_mode_gdt_entries and change limition to 1M and data base to 0; */ - real_mode_gdt_entries_at_eseg[0] = 0x0000000000000000ULL; /* Null descriptor */ - real_mode_gdt_entries_at_eseg[1] = 0x000f9a000000ffffULL; /* 16-bit real-mode 1M code at 0x00000000 */ - real_mode_gdt_entries_at_eseg[2] = 0x000f93000000ffffULL; /* 16-bit real-mode 1M data at 0x00000000 */ - - wake_thunk16_Xgt_desc = (void *)WAKE_THUNK16_XDTR; - wake_thunk16_Xgt_desc[0].size = sizeof(real_mode_gdt_entries) - 1; - wake_thunk16_Xgt_desc[0].address = (long)real_mode_gdt_entries_at_eseg; - wake_thunk16_Xgt_desc[1].size = 0x3ff; - wake_thunk16_Xgt_desc[1].address = 0; - wake_thunk16_Xgt_desc[2].size = 0; - wake_thunk16_Xgt_desc[2].address = 0; - - /* Added this code to get current value of EIP. */ - __asm__ volatile ( - "calll geip\n\t" - "geip: \n\t" - "popl %0\n\t" - : "=a" (dwEip) - ); - - unsigned char *dest, *src; - src = (unsigned char *)dwEip; - dest = (void *)WAKE_RECOVER1M_CODE; - u32 i; - for (i = 0; i < 0x200; i++) - dest[i] = src[i]; - - __asm__ __volatile__("ljmp $0x0010,%0" /* 08 error */ - ::"i"((void *)(WAKE_RECOVER1M_CODE + 0x20))); - - /* Added 0x20 "nop" to make sure the ljmp will not jump then halt. */ - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - asm volatile ("nop"); - - __asm__ volatile ( - /* - * Set new esp, maybe ebp should not equal to esp?, due to the - * variable in acpi_jump_wake?, anyway, this may be not a big - * problem. and I didn't clear the area (ef000+-0x200) to zero. - */ - "movl %0, %%ebp\n\t" - "movl %0, %%esp\n\t"::"a" (WAKE_THUNK16_STACK) - ); - - /* - * Only "src" and "dest" use the new stack, and the esp maybe also - * used in resumevector. - */ -#if PAYLOAD_IS_SEABIOS == 1 - /* WAKE_MEM_INFO inited in get_set_top_available_mem in tables.c. */ - src = - (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - 0x100000); - dest = 0; - - /* - * If recovered 0-e0000, then when resume, before WinXP turn on the - * desktop screen, there is gray background which last 1sec. - */ - for (i = 0; i < 0xa0000; i++) - dest[i] = src[i]; - -#if 0 - __asm__ volatile ( - "movl %0, %%esi\n\t" - "movl $0, %%edi\n\t" - "movl $0xa0000, %%ecx\n\t" - "shrl $2, %%ecx\n\t" - "rep movsd\n\t" - ::"a"(src) - ); -#endif - src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - - 0x100000 + 0xc0000); - -#if 0 - dest = 0xc0000; - for (i = 0; i < 0x20000; i++) - dest[i] = src[i]; - - __asm__ volatile ( - "movl %0, %%esi\n\t" - "movl $0xc0000, %%edi\n\t" - "movl $0x20000, %%ecx\n\t" - "shrl $2, %%ecx\n\t" - "rep movsd\n\t" - ::"a"(src) - ); -#endif - - src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - - 0x100000 + 0xe0000 + WAKE_SPECIAL_SIZE); - - /* dest = 0xf0000; */ - /* for (i = 0; i < 0x10000; i++) */ - /* dest[i] = src[i]; */ - __asm__ volatile ( - "movl %0, %%esi\n\t" - "movl %1, %%edi\n\t" - "movl %2, %%ecx\n\t" - "shrl $2, %%ecx\n\t" - "rep movsd\n\t"::"r" (src), - "r"(0xe0000 + WAKE_SPECIAL_SIZE), - "r"(0x10000 - WAKE_SPECIAL_SIZE) - ); - - src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - - 0x100000 + 0xf0000); - /* dest = 0xf0000; */ - /* for (i = 0; i < 0x10000; i++) */ - /* dest[i] = src[i]; */ - __asm__ volatile ( - "movl %0, %%esi\n\t" - "movl $0xf0000, %%edi\n\t" - "movl $0x10000, %%ecx\n\t" - "shrl $2, %%ecx\n\t" "rep movsd\n\t"::"a" (src) - ); - - asm volatile ("wbinvd"); -#endif - /* Set up the IDT for real mode. */ - asm volatile ("lidt %0"::"m" (wake_thunk16_Xgt_desc[1])); - - /* - * Set up a GDT from which we can load segment descriptors for real - * mode. The GDT is not used in real mode; it is just needed here to - * prepare the descriptors. - */ - asm volatile ("lgdt %0"::"m" (wake_thunk16_Xgt_desc[0])); - - /* - * Load the data segment registers, and thus the descriptors ready for - * real mode. The base address of each segment is 0x100, 16 times the - * selector value being loaded here. This is so that the segment - * registers don't have to be reloaded after switching to real mode: - * the values are consistent for real mode operation already. - */ - __asm__ __volatile__( - "movl $0x0010,%%eax\n" - "\tmovl %%eax,%%ds\n" - "\tmovl %%eax,%%es\n" - "\tmovl %%eax,%%fs\n" - "\tmovl %%eax,%%gs\n" - "\tmovl %%eax,%%ss":::"eax" - ); - - /* - * Jump to the 16-bit code that we copied earlier. It disables paging - * and the cache, switches to real mode, and jumps to the BIOS reset - * entry point. - */ - - __asm__ __volatile__( - "ljmp $0x0008,%0"::"i" - ((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100)) - ); -} - -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright 2007 rPath, Inc. - All Rights Reserved - * - * This file is part of the Linux kernel, and is made available under - * the terms of the GNU General Public License version 2. - * - * ----------------------------------------------------------------------- */ - -/* - * arch/x86/boot/a20.c - * - * Enable A20 gate (return -1 on failure) - */ - -#define MAX_8042_LOOPS 100000 - -static int empty_8042(void) -{ - u8 status; - int loops = MAX_8042_LOOPS; - - while (loops--) { - udelay(1); - - status = inb(0x64); - if (status & 1) { - /* Read and discard input data */ - udelay(1); - (void)inb(0x60); - } else if (!(status & 2)) { - /* Buffers empty, finished! */ - return 0; - } - } - - return -1; -} - -/* Returns nonzero if the A20 line is enabled. The memory address - used as a test is the int $0x80 vector, which should be safe. */ - -#define A20_TEST_ADDR (4*0x80) -#define A20_TEST_SHORT 32 -#define A20_TEST_LONG 2097152 /* 2^21 */ - -static int a20_test(int loops) -{ - int ok = 0; - int saved, ctr; - - saved = ctr = *((u32 *) A20_TEST_ADDR); - - while (loops--) { - - *((u32 *) A20_TEST_ADDR) = ++ctr; - - udelay(1); /* Serialize and make delay constant */ - - ok = *((u32 *) A20_TEST_ADDR + 0xffff0 + 0x10) ^ ctr; - if (ok) - break; - } - - *((u32 *) A20_TEST_ADDR) = saved; - return ok; -} - -/* Quick test to see if A20 is already enabled */ -static int a20_test_short(void) -{ - return a20_test(A20_TEST_SHORT); -} - -/* Longer test that actually waits for A20 to come on line; this - is useful when dealing with the KBC or other slow external circuitry. */ -static int a20_test_long(void) -{ - return a20_test(A20_TEST_LONG); -} - -static void enable_a20_kbc(void) -{ - empty_8042(); - - outb(0xd1, 0x64); /* Command write */ - empty_8042(); - - outb(0xdf, 0x60); /* A20 on */ - empty_8042(); -} - -static void enable_a20_fast(void) -{ - u8 port_a; - - port_a = inb(0x92); /* Configuration port A */ - port_a |= 0x02; /* Enable A20 */ - port_a &= ~0x01; /* Do not reset machine */ - outb(port_a, 0x92); -} - -/* - * Actual routine to enable A20; return 0 on ok, -1 on failure - */ - -#define A20_ENABLE_LOOPS 255 /* Number of times to try */ - -int enable_a20(void) -{ - int loops = A20_ENABLE_LOOPS; - - while (loops--) { - /* First, check to see if A20 is already enabled - (legacy free, etc.) */ - if (a20_test_short()) - return 0; - - /* Try enabling A20 through the keyboard controller */ - empty_8042(); - - // if (a20_test_short()) - // return 0; /* BIOS worked, but with delayed reaction */ - - enable_a20_kbc(); - if (a20_test_long()) - return 0; - - /* Finally, try enabling the "fast A20 gate" */ - enable_a20_fast(); - if (a20_test_long()) - return 0; - } - - return -1; -} diff --git a/src/mainboard/via/epia-m700/wakeup.h b/src/mainboard/via/epia-m700/wakeup.h deleted file mode 100644 index 93d5a7f..0000000 --- a/src/mainboard/via/epia-m700/wakeup.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 One Laptop per Child, Association, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef WAKEUP_H -#define WAKEUP_H - -#define WAKE_SPECIAL_AREA 0xE0000 -#define WAKE_SPECIAL_SIZE 0x1000 -#define WAKE_THUNK16_ADDR (WAKE_SPECIAL_AREA + 0x200) -#define WAKE_THUNK16_GDT (WAKE_SPECIAL_AREA + 0x300) -#define WAKE_THUNK16_XDTR (WAKE_SPECIAL_AREA + 0x350) -#define WAKE_MEM_INFO (WAKE_SPECIAL_AREA + 0x400) -#define WAKE_RECOVER1M_CODE (WAKE_SPECIAL_AREA + 0x500) -#define WAKE_THUNK16_STACK (WAKE_SPECIAL_AREA + 0xf00) - -#endif diff --git a/src/mainboard/via/epia-m850/Kconfig b/src/mainboard/via/epia-m850/Kconfig deleted file mode 100644 index 65fd478..0000000 --- a/src/mainboard/via/epia-m850/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011-2012 Alexandru Gagniuc mr.nuke.me@gmail.com -## -## This program is free software: you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation, either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program. If not, see http://www.gnu.org/licenses/. -## - -if BOARD_VIA_EPIA_M850 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_NANO - select NORTHBRIDGE_VIA_VX900 - select SUPERIO_FINTEK_F81865F - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select HAVE_MP_TABLE - #select HAVE_OPTION_TABLE - #select HAVE_ACPI_TABLES - #select HAVE_ACPI_RESUME - #select BOARD_HAS_FADT - select BOARD_ROMSIZE_KB_512 - -config MAINBOARD_DIR - string - default via/epia-m850 - -config MAINBOARD_PART_NUMBER - string - default "EPIA-M850" - -config IRQ_SLOT_COUNT - int - default 13 - -endif # BOARD_VIA_EPIA_M850 diff --git a/src/mainboard/via/epia-m850/board_info.txt b/src/mainboard/via/epia-m850/board_info.txt deleted file mode 100644 index 1e673ab..0000000 --- a/src/mainboard/via/epia-m850/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Category: mini -Board URL: http://www.viaembedded.com/en/products/boards/1290/1/EPIA-M850.html -ROM package: SOIC8 -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/via/epia-m850/devicetree.cb b/src/mainboard/via/epia-m850/devicetree.cb deleted file mode 100644 index 0c21cc8..0000000 --- a/src/mainboard/via/epia-m850/devicetree.cb +++ /dev/null @@ -1,111 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011-2013 Alexandru Gagniuc mr.nuke.me@gmail.com -## -## This program is free software: you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation, either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program. If not, see http://www.gnu.org/licenses/. -## - -chip northbridge/via/vx900 # Northbridge - register "assign_pex_to_dp" = "0" - register "pcie_port1_2_lane_wide" = "1" - register "ext_int_route_to_pirq" = "'H'" - - device cpu_cluster 0 on # APIC cluster - chip cpu/via/nano # VIA NANO - device lapic 0 on end # APIC - end - end - device domain 0 on - device pci 0.0 on end # [0410] Host controller - device pci 0.1 on end # [1410] Error Reporting - device pci 0.2 on end # [2410] CPU Bus Control - device pci 0.3 on end # [3410] DRAM Bus Control - device pci 0.4 on end # [4410] Power Management - device pci 0.5 on # [5410] APIC+Traffic Control - chip drivers/generic/ioapic - register "have_isa_interrupts" = "0" - register "irq_on_fsb" = "1" - register "enable_virtual_wire" = "1" - register "base" = "0xfecc0000" - device ioapic 2 on end - end - end - device pci 0.6 off end # [6410] Scratch Registers - device pci 0.7 on end # [7410] V4 Link Control - device pci 1.0 on # [7122] VGA Chrome9 HD - ioapic_irq 2 INTA 0x28 - end - device pci 1.1 on # [9170] Audio Device - ioapic_irq 2 INTA 0x29 - end - device pci 3.0 on end # [a410] PEX1 - device pci 3.1 on end # [b410] PEX2 - device pci 3.2 on end # [c410] PEX3 - device pci 3.3 on end # [d410] PEX4 - device pci 3.4 on end # [e410] PCIE bridge - device pci b.0 on end # [a409] USB Device - device pci c.0 off end # [95d0] SDIO Host Controller - device pci d.0 off end # [9530] Memory Card controller - device pci f.0 on # [9001] SATA Controller - ioapic_irq 1 INTA 0x15 - end - device pci 10.0 on end # [3038] USB 1.1 - device pci 10.1 on end # [3038] USB 1.1 - device pci 10.2 on end # [3038] USB 1.1 - device pci 10.3 on end # [3038] USB 1.1 - device pci 10.4 on end # [3104] USB 2.0 - device pci 11.0 on # [8410] LPC Bus Control - chip drivers/generic/ioapic - register "have_isa_interrupts" = "1" - register "irq_on_fsb" = "1" - register "enable_virtual_wire" = "1" - register "base" = "0xfec00000" - device ioapic 1 on end - end - #chip drivers/generic/generic # DIMM 0 channel 1 - # device i2c 50 on end - #end - #chip drivers/generic/generic # DIMM 1 channel 1 - # device i2c 51 on end - #end - chip superio/fintek/f81865f # Super duper IO - device pnp 4e.0 off end # Floppy - device pnp 4e.3 off end # Parallel Port - device pnp 4e.4 off end # Hardware Monitor - device pnp 4e.5 off end # Keyboard not here - device pnp 4e.6 off end # GPIO - device pnp 4e.a off end # PME - device pnp 4e.10 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.11 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.12 on # COM3 - io 0x60 = 0x3e8 - irq 0x70 = 10 - end - device pnp 4e.13 on # COM4 - io 0x60 = 0x2e8 - irq 0x70 = 11 - end - end # superio/fintek/f81865f - end # LPC - device pci 11.7 on end # [a353] North-South control - device pci 14.0 on end # [3288] Azalia HDAC - end -end diff --git a/src/mainboard/via/epia-m850/irq_tables.c b/src/mainboard/via/epia-m850/irq_tables.c deleted file mode 100644 index 28fbb4f..0000000 --- a/src/mainboard/via/epia-m850/irq_tables.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see http://www.gnu.org/licenses/. - */ - -#include <arch/pirq_routing.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <string.h> /* <- For memset */ - -#define _OFF 0x00 -#define ___OFF 0x0000 -#define LNKA 1 -#define LNKB 2 -#define LNKC 3 -#define LNKD 4 -#define LNKE 5 -#define LNKF 6 -#define LNKG 7 -#define LNKH 8 -#define BITMAP 0xdce0 -/* The link that carries the SATA interrupt has its own mask, just in case - * we want to make sure our SATA controller gets mapped to IRQ 14 */ -#define B_SATA BITMAP - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32 + 16 * 13, /* Max. number of devices on the bus */ - 0x00, /* Interrupt router bus */ - (0x11 << 3) | 0x0, /* Interrupt router dev */ - 0, /* IRQs devoted exclusively for PCI */ - PCI_VENDOR_ID_VIA, /* Vendor */ - PCI_DEVICE_ID_VIA_VX900_LPC, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x19, /* Checksum (has to be set to some value that - * would give 0 after the sum of all bytes - * for this structure (including checksum). */ - { - /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, (0x01 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x00, (0x03 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, - {0x00, (0x0a << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0}, - {0x00, (0x0b << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x00, (0x0c << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x00, (0x0d << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x00, (0x0f << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x00, (0x10 << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0}, - {0x00, (0x14 << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, - {0x01, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x1, 0x0}, - {0x02, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x2, 0x0}, - {0x03, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, - {0x04, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/via/epia-m850/mainboard.c b/src/mainboard/via/epia-m850/mainboard.c deleted file mode 100644 index dbe682c..0000000 --- a/src/mainboard/via/epia-m850/mainboard.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Alexandru Gagniuc mr.nuke.me@gmail.com - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see http://www.gnu.org/licenses/. - */ - -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci_ops.h> -#include <console/console.h> - -#if CONFIG_VGA_ROM_RUN - -#include <arch/interrupt.h> -#include <x86emu/x86emu.h> - -#include <northbridge/via/vx900/vx900.h> - -static int vx900_int15_handler(void) -{ - int res; - - printk(BIOS_DEBUG, "%s %0x\n", __func__, X86_AX & 0xffff); - /* Set AX return value here so we don't set it every time. Just set it - * to something else if the callback is unsupported */ - res = -1; - switch (X86_AX & 0xffff) { -#if 0 - case 0x5f01: - /* VGA POST - panel type */ - /* FIXME: Don't hardcode panel type */ - /* Panel Type Number */ - X86_CX = 0; - res = 0; - break; - case 0x5f02: - { - /* Boot device selection */ - X86_BL = INT15_5F02_BL_HWOPT_CRTCONN; - /* FIXME: or 0 ? */ - X86_BH = 0; // INT15_5F02_BH_TV_CONN_DEFAULT; - X86_EBX = 0; // INT15_5F02_EBX_HDTV_RGB; - X86_ECX = INT15_5F02_ECX_DISPLAY_CRT; - //X86_ECX |= INT15_5F02_ECX_TV_MODE_RGB; - //X86_ECX |= INT15_5F02_ECX_HDTV_1080P; - X86_DL = INT15_5F02_DL_TV_LAYOUT_DEFAULT; - res = 0; - break; - } -#endif - case 0x5f18: - X86_BL = vx900_int15_get_5f18_bl(); - res = 0; - break; -#if 0 - case 0x5f2a: - /* Get SSC Control Settings */ - /* FIXME: No idea what this does. Just disable this feature - * for now */ - X86_CX = INT15_5F2A_CX_SSC_ENABLE; - res = 0; - break; - case 0x5f2b: - /* Engine clock setting */ - /* FIXME: ECLK fixed 250MHz ? */ - X86_EBX = INT15_5F2B_EBX_ECLK_250MHZ; - break; -#endif - default: - printk(BIOS_DEBUG, "Unsupported INT15 call %04x!\n", - X86_AX & 0xffff); - X86_AX = 0; - res = -1; - break; - } - - if (res == 0) - X86_AX = 0x5f; - else - X86_AX = 0; - return X86_AX; -} -#endif - -static void mainboard_enable(device_t dev) -{ - (void)dev; - -#if CONFIG_VGA_ROM_RUN - print_debug("Installing INT15 handler...\n"); - mainboard_interrupt_handlers(0x15, &vx900_int15_handler); -#endif -} - -struct chip_operations mainboard_ops = { - CHIP_NAME("VIA EPIA-M850 Mainboard") - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/via/epia-m850/romstage.c b/src/mainboard/via/epia-m850/romstage.c deleted file mode 100644 index 7b62d86..0000000 --- a/src/mainboard/via/epia-m850/romstage.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011-2012 Alexandru Gagniuc mr.nuke.me@gmail.com - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see http://www.gnu.org/licenses/. - */ - -/* - * Inspired from the EPIA-M700 - */ -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/io.h> -#include <arch/hlt.h> -#include <console/console.h> -#include <lib.h> -#include <cpu/x86/bist.h> -#include <string.h> -#include <timestamp.h> -#include <console/cbmem_console.h> - -#include "northbridge/via/vx900/early_vx900.h" -#include "northbridge/via/vx900/raminit.h" -#include <superio/fintek/common/fintek.h> -#include <superio/fintek/f81865f/f81865f.h> - -#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) - -/* cache_as_ram.inc jumps to here. */ -#include <cpu/intel/romstage.h> -void main(unsigned long bist) -{ - u32 tolm; - - timestamp_init(rdtsc()); - timestamp_add_now(TS_START_ROMSTAGE); - - /* First thing we need to do on the VX900, before anything else */ - vx900_enable_pci_config_space(); - - /* Serial console is easy to take care of */ - fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - print_debug("Console initialized.\n"); - - vx900_cpu_bus_interface_setup(); - - /* Be smart. Get this info */ - vx900_print_strapping_info(); - /* DEVEL helper */ - vx900_disable_auto_reboot(); - /* Halt if there was a built-in self test failure. */ - report_bist_failure(bist); - - /* Oh, almighty, give us the SMBUS */ - enable_smbus(); - - timestamp_add_now(TS_BEFORE_INITRAM); - /* Now we can worry about raminit. - * This board only has DDR3, so no need to worry about which DRAM type - * to use */ - dimm_layout dimms = { {0x50, 0x51, SPD_END_LIST} }; - vx900_init_dram_ddr3(&dimms); - timestamp_add_now(TS_AFTER_INITRAM); - - /* TODO: All these ram_checks are here to ensure we test most of the RAM - * below 4G. They should not be needed once VX900 raminit is stable */ - ram_check(0, 0x80); - ram_check(512 << 10, 0x80); - ram_check((1 << 20) - (1 << 10), 0x80); - ram_check((1 << 24), 0x80); - ram_check((512 + 256 - 1) << 20, 0x80); - ram_check(0x80c0000, 0x80); - tolm = ((pci_read_config16(MCU, 0x84) & 0xfff0) >> 4) << 20; - if (tolm > (1 * (u32) GiB)) - ram_check(1024 << 10, 0x80); - if (tolm > (2 * (u32) GiB)) - ram_check(2048 << 20, 0x80); - - print_debug("We passed RAM verify\n"); - - /* We got RAM working, now we can write the timestamps to RAM */ -#if CONFIG_EARLY_CBMEM_INIT - cbmem_recovery(0); -#endif - timestamp_add_now(TS_END_ROMSTAGE); - /* FIXME: See if this is needed or take this out please */ - /* Disable Memcard and SDIO */ - pci_mod_config8(LPC, 0x51, 0, (1 << 7) | (1 << 4)); -} diff --git a/src/mainboard/via/epia-mii/Kconfig b/src/mainboard/via/epia-mii/Kconfig deleted file mode 100644 index ff31b93..0000000 --- a/src/mainboard/via/epia-mii/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_VIA_EPIA_MII - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "EPIA-MII" - -endif diff --git a/src/mainboard/via/epia-mii/board_info.txt b/src/mainboard/via/epia-mii/board_info.txt deleted file mode 100644 index 78b956d..0000000 --- a/src/mainboard/via/epia-mii/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... -Flashrom support: y -Category: mini -Clone of: via/epia-m diff --git a/src/mainboard/via/epia-ml/Kconfig b/src/mainboard/via/epia-ml/Kconfig deleted file mode 100644 index 5e7b6ab..0000000 --- a/src/mainboard/via/epia-ml/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if BOARD_VIA_EPIA_ML - -# Dummy for abuild - -config MAINBOARD_PART_NUMBER - string - default "EPIA-ML" - -endif diff --git a/src/mainboard/via/epia-ml/board_info.txt b/src/mainboard/via/epia-ml/board_info.txt deleted file mode 100644 index cbea112..0000000 --- a/src/mainboard/via/epia-ml/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... -Flashrom support: y -Category: mini -Clone of: via/epia-m diff --git a/src/mainboard/via/epia-n/Kconfig b/src/mainboard/via/epia-n/Kconfig deleted file mode 100644 index 3ea6878..0000000 --- a/src/mainboard/via/epia-n/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -if BOARD_VIA_EPIA_N - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_VIA_C3 - select NORTHBRIDGE_VIA_CN400 - select SOUTHBRIDGE_VIA_VT8237R - select SUPERIO_WINBOND_W83697HF - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select EPIA_VT8237R_INIT - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_512 - select ROMCC - -config MAINBOARD_DIR - string - default via/epia-n - -config MAINBOARD_PART_NUMBER - string - default "EPIA-N" - -config IRQ_SLOT_COUNT - int - default 7 - -endif # BOARD_VIA_EPIA_N diff --git a/src/mainboard/via/epia-n/acpi/irq_links.asl b/src/mainboard/via/epia-n/acpi/irq_links.asl deleted file mode 100644 index 29b2a1b..0000000 --- a/src/mainboard/via/epia-n/acpi/irq_links.asl +++ /dev/null @@ -1,571 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-N / NL - * Basic description of PCI Interrupt Assignments. - * This is expected to be included into _SB.PCI0 namespace - * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk - * - */ - - /* PCI PnP Routing Links */ - - /* Define how interrupt Link A is plumbed in */ - Device (LNKA) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x01) - /* Status - always return ready */ - Method (_STA, 0, NotSerialized) - { - /* See if coreboot has allocated INTA# */ - And (PIRA, 0xF0, Local0) - If (LEqual (Local0, 0x00)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, ) - {3,4,6,7,10,11,12} - }) - Return (BUFA) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFA, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, _Y07) - {} - }) - /* Read the Binary Encoded Field and Map this */ - /* onto the bitwise _INT field in the IRQ descriptor */ - /* See ACPI Spec for detail of _IRQ Descriptor */ - CreateByteField (BUFA, _SB.PCI0.LNKA._CRS._Y07._INT, IRA1) - CreateByteField (BUFA, 0x02, IRA2) - Store (0x00, Local3) - Store (0x00, Local4) - And (PIRA, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNotEqual (Local1, 0x00)) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRA1) - Store (Local4, IRA2) - } - Return (BUFA) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - Set PnP Routing Reg to 0 */ - Method (_DIS, 0, NotSerialized ) - { - And (PIRA, 0x0F, PIRA) - } - } // End of LNKA - - Device (LNKB) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x02) - Method (_STA, 0, NotSerialized) - { - /* See if coreboot has allocated INTB# */ - And (PIBC, 0x0F, Local0) - If (LEqual (Local0, 0x00)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, ) - {3,4,6,7,10,11,12} - }) - Return (BUFB) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFB, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, _Y08) - {} - }) - /* Read the Binary Encoded Field and Map this */ - /* onto the bitwise _INT field in the IRQ descriptor */ - /* See ACPI Spec for detail of _IRQ Descriptor */ - CreateByteField (BUFB, _SB.PCI0.LNKB._CRS._Y08._INT, IRB1) - CreateByteField (BUFB, 0x02, IRB2) - Store (0x00, Local3) - Store (0x00, Local4) - And (PIBC, 0x0F, Local1) - If (LNotEqual (Local1, 0x00)) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRB1) - Store (Local4, IRB2) - } - Return (BUFB) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - Set PnP Routing Reg to 0 */ - Method (_DIS, 0, NotSerialized ) - { - And (PIBC, 0xF0, PIBC) - } - - } // End of LNKB - - Device (LNKC) - { - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x03) - Method (_STA, 0, NotSerialized) - { - /* See if coreboot has allocated INTC# */ - And (PIBC, 0xF0, Local0) - If (LEqual (Local0, 0x00)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFC, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, ) - {3,4,6,7,10,11,12} - }) - Return (BUFC) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFC, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, _Y09) - {} - }) - /* Read the Binary Encoded Field and Map this */ - /* onto the bitwise _INT field in the IRQ descriptor */ - /* See ACPI Spec for detail of _IRQ Descriptor */ - CreateByteField (BUFC, _SB.PCI0.LNKC._CRS._Y09._INT, IRC1) - CreateByteField (BUFC, 0x02, IRC2) - Store (0x00, Local3) - Store (0x00, Local4) - And (PIBC, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNotEqual (Local1, 0x00)) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRC1) - Store (Local4, IRC2) - } - Return (BUFC) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - Set PnP Routing Reg to 0 */ - Method (_DIS, 0, NotSerialized ) - { - And (PIBC, 0x0F, PIBC) - } - -} // End of LNKC - -Device (LNKD) -{ - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x04) - Method (_STA, 0, NotSerialized) - { - /* See if coreboot has allocated INTD# */ - And (PIRD, 0xF0, Local0) - If (LEqual (Local0, 0x00)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (BUFD, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, ) - {3,4,6,7,10,11,12} - }) - Return (BUFD) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUFD, ResourceTemplate () - { - IRQ (Level, ActiveLow, Shared, _Y0A) - {} - }) - /* Read the Binary Encoded Field and Map this */ - /* onto the bitwise _INT field in the IRQ descriptor */ - /* See ACPI Spec for detail of _IRQ Descriptor */ - CreateByteField (BUFD, _SB.PCI0.LNKD._CRS._Y0A._INT, IRD1) - CreateByteField (BUFD, 0x02, IRD2) - Store (0x00, Local3) - Store (0x00, Local4) - And (PIRD, 0xF0, Local1) - ShiftRight (Local1, 0x04, Local1) - If (LNotEqual (Local1, 0x00)) - { - If (LGreater (Local1, 0x07)) - { - Subtract (Local1, 0x08, Local2) - ShiftLeft (One, Local2, Local4) - } - Else - { - If (LGreater (Local1, 0x00)) - { - ShiftLeft (One, Local1, Local3) - } - } - - Store (Local3, IRD1) - Store (Local4, IRD2) - } - Return (BUFD) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - Set PnP Routing Reg to 0 */ - Method (_DIS, 0, NotSerialized ) - { - And (PIRD, 0x0F, PIRD) - } - -} // End of LNKD - - -/* APIC IRQ Links */ - -Device (ATAI) -{ - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x05) - Method (_STA, 0, NotSerialized) - { - /* ATFL == 0x02 if SATA Enabled */ - If (LNotEqual (ATFL, 0x02)) - { - /* Double Check By Reading SATA VID */ - /* Otherwise Compatibility Mode */ - If (LNotEqual (_SB.PCI0.SATA.VID, 0x1106)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - Else - { - /* Serial ATA Enabled Check if PATA is in */ - /* Compatibility Mode */ - If (LEqual (_SB.PCI0.PATA.ENAT, 0x0A)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (ATAN, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) - { - 0x00000014, - } - }) - Return (ATAN) - } - - Method (_CRS, 0, NotSerialized) - { - Name (ATAB, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y10) - { - 0x00000000, - } - }) - CreateByteField (ATAB, _SB.PCI0.ATAI._CRS._Y10._INT, IRAI) - Store (0x14, IRAI) - Return (ATAB) - - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - -} // End of ATA Interface Link - - -Device (USBI) -{ - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x0A) - Method (_STA, 0, NotSerialized) - { - /* Check that at least one of the USB */ - /* functions is enabled */ - And (IDEB, 0x37, Local0) - If (LEqual (Local0, 0x37)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (USBB, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) - { - 0x00000015, - } - }) - - Return(USBB) - } - - Method (_CRS, 0, NotSerialized) - { - Name (USBB, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y12) - { - 0x00000000, - } - }) - CreateByteField (USBB, _SB.PCI0.USBI._CRS._Y12._INT, IRBI) - Store (0x15, IRBI) - Return (USBB) - } - - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} -} - -Device (VT8I) -{ - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x0B) - Method (_STA, 0, NotSerialized) - { - /* Check Whether Sound and/or Modem are Activated */ - If (LEqual (EAMC, 0x03)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (A97C, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) - { - 0x00000016, - } - }) - Return (A97C) - } - - Method (_CRS, 0, NotSerialized) - { - Name (A97B, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y14) - { - 0x00000000, - } - }) - CreateByteField (A97B, _SB.PCI0.VT8I._CRS._Y14._INT, IRCI) - Store (0x16, IRCI) - Return (A97B) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - -} - - -Device (NICI) -{ - Name (_HID, EisaId ("PNP0C0F")) - Name (_UID, 0x0C) - Method (_STA, 0, NotSerialized) - { - /* Check if LAN Function is Enabled */ - /* Note that LAN Enable Polarity is different */ - /* from other functions in VT8237R !? */ - If (LEqual (ELAN, 0x00)) - { - Return (0x09) - } - Else - { - Return (0x0B) - } - } - - Method (_PRS, 0, NotSerialized) - { - Name (NICB, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) - { - 0x00000017, - } - }) - Return (NICB) - } - - Method (_CRS, 0, NotSerialized) - { - Name (NICD, ResourceTemplate () - { - Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y16) - { - 0x00000000, - } - }) - CreateByteField (NICD, _SB.PCI0.NICI._CRS._Y16._INT, IRDI) - Store (0x17, IRDI) - Return (NICD) - } - - /* Set Resources - dummy function to keep Linux ACPI happy - * Linux is more than happy not to tinker with irq - * assignments as long as the CRS and STA functions - * return good values - */ - Method (_SRS, 1, NotSerialized) {} - /* Disable - dummy function to keep Linux ACPI happy */ - Method (_DIS, 0, NotSerialized ) {} - - -} diff --git a/src/mainboard/via/epia-n/acpi/pata_methods.asl b/src/mainboard/via/epia-n/acpi/pata_methods.asl deleted file mode 100644 index 1f3e137..0000000 --- a/src/mainboard/via/epia-n/acpi/pata_methods.asl +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-N / NL - * Basic description of some hardware resources to allow - * interrupt assignments to be done. This is expected to be included - * into the PATA Device definition in ab_physical.asl - * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk - * - */ - -Name (TIM0, Package (0x07) -{ - Package (0x05) - { - 0x78, 0xB4, 0xF0, 0x017F, 0x0258 - }, - - Package (0x05) - { - 0x20, 0x22, 0x33, 0x47, 0x5D - }, - - Package (0x05) - { - 0x04, 0x03, 0x02, 0x01, 0x00 - }, - - Package (0x04) - { - 0x02, 0x01, 0x00, 0x00 - }, - - Package (0x07) - { - 0x78, 0x50, 0x3C, 0x2D, 0x1E, 0x14, 0x0F - }, - - Package (0x0F) - { - 0x06, 0x05, 0x04, 0x04, 0x03, 0x03, 0x02, 0x02, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,0x00 - }, - - Package (0x07) - { - 0x0E, 0x08, 0x06, 0x04, 0x02, 0x01, 0x00 - } -}) - - -/* This method sets up the PATA Timing Control. - * Note that a lot of this is done in the - * coreboot VT8237R init code, but this is - * already getting very cluttered with board - * specific code. Using ACPI will allow this - * to be de-cluttered a bit (so long as we're - * running a ACPI capable OS!) - */ - -Method (PMEX, 0, Serialized) -{ - If (REGF) - { - /* Check if these regs are still at defaults */ - /* Board specific timing improvement if not */ - /* Already changed */ - If (LEqual (PMPT, 0xA8)) - { - Store (0x5D, PMPT) - } - - If (LEqual (PSPT, 0xA8)) - { - Store (0x5D, PSPT) - } - - If (LEqual (SMPT, 0xA8)) - { - Store (0x5D, SMPT) - } - - If (LEqual (SSPT, 0xA8)) - { - Store (0x5D, SSPT) - } - - } -} - -/* This Method Provides the method that is used to */ -/* Reset ATA Drives to POST reset condition */ -Method (GTF, 4, Serialized) -{ - Store (Buffer (0x07) - { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF - }, Local1) - Store (Buffer (0x07) - { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF - }, Local2) - CreateByteField (Local1, 0x01, MODE) - CreateByteField (Local2, 0x01, UMOD) - CreateByteField (Local1, 0x05, PCHA) - CreateByteField (Local2, 0x05, UCHA) - And (Arg0, 0x03, Local3) - If (LEqual (And (Local3, 0x01), 0x01)) - { - Store (0xB0, PCHA) - Store (0xB0, UCHA) - } - - If (Arg1) - { - Store (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Arg2)), - UMOD) - Or (UMOD, 0x40, UMOD) - } - Else - { - Store (Match (DerefOf (Index (TIM0, 0x01)), MEQ, Arg3, MTR, - 0x00, 0x00), Local0) - Or (0x20, DerefOf (Index (DerefOf (Index (TIM0, 0x03)), Local0 - )), UMOD) - } - - Store (Match (DerefOf (Index (TIM0, 0x01)), MEQ, Arg3, MTR, - 0x00, 0x00), Local0) - Or (0x08, DerefOf (Index (DerefOf (Index (TIM0, 0x02)), Local0 - )), MODE) - Concatenate (Local1, Local2, Local6) - Return (Local6) -} diff --git a/src/mainboard/via/epia-n/acpi/pci_init.asl b/src/mainboard/via/epia-n/acpi/pci_init.asl deleted file mode 100644 index 3169a03..0000000 --- a/src/mainboard/via/epia-n/acpi/pci_init.asl +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-N / NL - * Basic description of PCI Interrupt Assignments. - * This is expected to be included into _SB.PCI0 namespace - * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk - * - */ - -/* This file provides a PCI Bus Initialisation Method that sets - * some flags for use in the interrupt link assignment - */ - -Method (_SB.PCI0._INI, 0, NotSerialized) -{ - - /* Checking for ATA Interface Enabled */ - Store (0x00, ATFL) - If (LEqual (EIDE, 0x01)) - { - Store (0x02, ATFL) - } - Else - { - If (LNotEqual (_SB.PCI0.PATA.VID, 0x1106)) - { - Store (0x01, ATFL) - } - } - -} diff --git a/src/mainboard/via/epia-n/acpi/sb_physical.asl b/src/mainboard/via/epia-n/acpi/sb_physical.asl deleted file mode 100644 index 7dd7b1d..0000000 --- a/src/mainboard/via/epia-n/acpi/sb_physical.asl +++ /dev/null @@ -1,548 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-N / NL - * Basic description of some hardware resources to allow - * interrupt assignments to be done. This is expected to be included - * into _SB.PCI0 namespace - * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk - * - */ - - -/* Basic description of the VT8237R LPC Interface - * PCI Configuration Space - */ - -Device (VT8R) -{ - Name (_ADR, 0x00110000) - OperationRegion (USBC, PCI_Config, 0x50, 0x02) - Scope () - { - Field (_SB.PCI0.VT8R.USBC, ByteAcc, NoLock, Preserve) - { - IDEB, 8 - } - } - - OperationRegion (VTSB, PCI_Config, 0x00, 0xE8) - Scope () - { - Field (_SB.PCI0.VT8R.VTSB, ByteAcc, NoLock, Preserve) - { - Offset (0x02), - DEID, 16, - Offset (0x2C), - ID2C, 8, - ID2D, 8, - ID2E, 8, - ID2F, 8, - Offset (0x44), - PIRE, 4, - PIRF, 4, - PIRG, 4, - PIRH, 4, - POLE, 1, - POLF, 1, - POLG, 1, - POLH, 1, - ENR8, 1, - Offset (0x50), - ESB4, 1, - ESB3, 1, - ESB2, 1, - EIDE, 1, - EUSB, 1, - ESB1, 1, - EAMC, 2, - EKBC, 1, - KBCC, 1, - EPS2, 1, - ERTC, 1, - ELAN, 1, - , 2, - USBD, 1, - SIRQ, 8, - Offset (0x55), - PIRA, 8, - PIBC, 8, - PIRD, 8, - Offset (0x75), - BSAT, 1, - Offset (0x94), - PWC1, 2, - GPO1, 1, - GPO2, 1, - GPO3, 1, - PLLD, 1 - } - } -} - -/* Basic Description of Serial ATA Interface */ -Device (SATA) -{ - Name (_ADR, 0x000F0000) - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.SATA.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.SATA.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } - - OperationRegion (SAPR, PCI_Config, 0x00, 0xC2) - Field (SAPR, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - IDEI, 8, - Offset (0x49), - , 6, - EPHY, 1 - } -} - -/* Basic Description of Parallel ATA Interface */ -/* An some initialisation of the interface */ -Device (PATA) -{ - Name (_ADR, 0x000F0001) - Name (REGF, 0x01) - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.PATA.VID, 0x1106)) - { - Return (0x00) - } - Else - { - PMEX () - /* Check if the Interface is Enabled */ - If (LEqual (_SB.PCI0.PATA.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } - - /* ACPI Spec says to check that regions are accessible */ - /* before trying to access them */ - Method (_REG, 2, NotSerialized) - { - /* Arg0 = Operating Region (0x02 == PCI_Config) */ - If (LEqual (Arg0, 0x02)) - { - /* Arg1 = Handler Connection Mode (0x01 == Connect) */ - Store (Arg1, REGF) - } - } - - #include "pata_methods.asl" - - - OperationRegion (PAPR, PCI_Config, 0x00, 0xC2) - Field (PAPR, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x09), - ENAT, 4, - Offset (0x3C), - IDEI, 8, - Offset (0x40), - ESCH, 1, - EPCH, 1, - Offset (0x48), - SSPT, 8, - SMPT, 8, - PSPT, 8, - PMPT, 8, - Offset (0x50), - SSUT, 4, - SSCT, 1, - SSUE, 3, - SMUT, 4, - SMCT, 1, - SMUE, 3, - PSUT, 4, - PSCT, 1, - PSUE, 3, - PMUT, 4, - PMCT, 1, - PMUE, 3 - } - - - Device (CHN0) - { - Name (_ADR, 0x00) - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.PATA.EPCH, 0x01)) - { - Return (0x00) - } - Else - { - Return (0x0F) - } - } - - Device (DRV0) - { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) - { - Return (GTF (0x00, PMUE, PMUT, PMPT)) - } - } - - Device (DRV1) - { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) - { - Return (GTF (0x01, PSUE, PSUT, PSPT)) - } - } - } - - Device (CHN1) - { - Name (_ADR, 0x01) - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (ATFL, 0x02)) - { - If (LEqual (_SB.PCI0.SATA.EPHY, 0x01)) - { - Return (0x00) - } - Else - { - If (LNotEqual (_SB.PCI0.PATA.ESCH, 0x01)) - { - Return (0x00) - } - Else - { - Return (0x0F) - } - } - } - Else - { - If (LEqual (ATFL, 0x02)) - { - If (LNotEqual (_SB.PCI0.PATA.ESCH, 0x01)) - { - Return (0x00) - } - Else - { - Return (0x0F) - } - } - Else - { - Return(0x00) - } - } - } - - Device (DRV0) - { - Name (_ADR, 0x00) - Method (_GTF, 0, NotSerialized) - { - Return (GTF (0x02, SMUE, SMUT, SMPT)) - } - } - - Device (DRV1) - { - Name (_ADR, 0x01) - Method (_GTF, 0, NotSerialized) - { - Return (GTF (0x03, SSUE, SSUT, SSPT)) - } - } - } -} // End of PATA Device - - -/* Implement Basic USB Presence detect and */ -/* Power Management Event mask */ -Device (USB0) -{ - Name (_ADR, 0x00100000) - Name (_PRW, Package (0x02) - { - 0x0E, - 0x03 - }) - - OperationRegion (U2F0, PCI_Config, 0x00, 0xC2) - Field (U2F0, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - U0IR, 4, - Offset (0x84), - ECDX, 2 - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.USB0.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.USB0.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -Device (USB1) -{ - Name (_ADR, 0x00100001) - Name (_PRW, Package (0x02) - { - 0x0E, - 0x03 - }) - - OperationRegion (U2F1, PCI_Config, 0x00, 0xC2) - Field (U2F1, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - U1IR, 4, - Offset (0x84), - ECDX, 2 - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.USB1.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.USB1.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -Device (USB2) -{ - Name (_ADR, 0x00100002) - Name (_PRW, Package (0x02) - { - 0x0E, - 0x03 - }) - - OperationRegion (U2F2, PCI_Config, 0x00, 0xC2) - Field (U2F2, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - U2IR, 4, - Offset (0x84), - ECDX, 2 - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.USB2.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.USB2.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -Device (USB3) -{ - Name (_ADR, 0x00100003) - Name (_PRW, Package (0x02) - { - 0x0E, - 0x03 - }) - - OperationRegion (U2F3, PCI_Config, 0x00, 0xC2) - Field (U2F3, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - U3IR, 4, - Offset (0x84), - ECDX, 2 - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.USB3.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.USB3.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -Device (USB4) -{ - Name (_ADR, 0x00100004) - Name (_PRW, Package (0x02) - { - 0x0E, - 0x03 - }) - - OperationRegion (U2F4, PCI_Config, 0x00, 0xC2) - Field (U2F4, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - U4IR, 4, - Offset (0x84), - ECDX, 2 - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.USB4.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.USB4.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -/* Basic Definition of Ethernet Interface */ -Device (NIC0) -{ - Name (_ADR, 0x00120000) - Name (_PRW, Package (0x02) - { - 0x03, - 0x05 - }) - - OperationRegion (NIC0, PCI_Config, 0x00, 0xC2) - Field (NIC0, ByteAcc, NoLock, Preserve) - { - VID, 16, - Offset (0x04), - CMDR, 3, - Offset (0x3C), - NIIR, 4, - } - - Method (_STA, 0, NotSerialized) - { - If (LNotEqual (_SB.PCI0.NIC0.VID, 0x1106)) - { - Return (0x00) - } - Else - { - If (LEqual (_SB.PCI0.NIC0.CMDR, 0x00)) - { - Return (0x0D) - } - Else - { - Return (0x0F) - } - } - } -} - -/* Very Basic Definition of Sound Controller */ -Device (AC97) -{ - Name (_ADR, 0x00110005) - Name (_PRW, Package (0x02) - { - 0x0D, - 0x05 - }) -} diff --git a/src/mainboard/via/epia-n/acpi_tables.c b/src/mainboard/via/epia-n/acpi_tables.c deleted file mode 100644 index 82dac53..0000000 --- a/src/mainboard/via/epia-n/acpi_tables.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * coreboot ACPI Table support - * written by Stefan Reinauer stepan@openbios.org - * ACPI FADT, FACS, and DSDT table support added by - * Nick Barker nick.barker9@btinternet.com, and those portions - * (C) Copyright 2004 Nick Barker - * (C) Copyright 2005 Stefan Reinauer - * (C) Copyright 2009 Jon Harrison bothlyn@blueyonder.co.uk - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -/* - * Most parts of this file copied from via\epia-m\acpi_tables.c, - * and via\epia-m700\acpi_tables.c - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include "southbridge/via/vt8237r/vt8237r.h" - -extern const unsigned char AmlCode[]; - -/* - * These 8 macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since - * mainboard/via/... have no mptable.c (so that I can not set - * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. - * So I have to copy these four to here. acpi_fill_madt() needs this. - */ -#define MP_IRQ_POLARITY_DEFAULT 0x0 -#define MP_IRQ_POLARITY_HIGH 0x1 -#define MP_IRQ_POLARITY_LOW 0x3 -#define MP_IRQ_POLARITY_MASK 0x3 -#define MP_IRQ_TRIGGER_DEFAULT 0x0 -#define MP_IRQ_TRIGGER_EDGE 0x4 -#define MP_IRQ_TRIGGER_LEVEL 0xc -#define MP_IRQ_TRIGGER_MASK 0xc - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - /* Nothing to do */ - return current; -} - -unsigned long acpi_fill_slit(unsigned long current) -{ - // Not implemented - return current; -} - -unsigned long acpi_create_madt_lapic_nmis(unsigned long current, u16 flags, - u8 lint) -{ - device_t cpu; - int cpu_index = 0; - - for (cpu = all_devices; cpu; cpu = cpu->next) { - if ((cpu->path.type != DEVICE_PATH_APIC) || - (cpu->bus->dev->path.type != DEVICE_PATH_CPU_CLUSTER)) { - continue; - } - if (!cpu->enabled) - continue; - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) - current, cpu_index, flags, lint); - cpu_index++; - } - return current; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - unsigned int gsi_base = 0x00; - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapics(current); - - /* Write SB IOAPIC. */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - VT8237R_APIC_ID, IO_APIC_ADDR, gsi_base); - - /* IRQ0 -> APIC IRQ2. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0x0); - - /* IRQ9 ACPI active low. */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* Create all subtables for processors. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} - -unsigned long acpi_fill_srat(unsigned long current) -{ - /* No NUMA, no SRAT */ - return current; -} - -unsigned long write_acpi_tables(unsigned long start) -{ - unsigned long current; - acpi_rsdp_t *rsdp; - acpi_rsdt_t *rsdt; - acpi_madt_t *madt; - acpi_fadt_t *fadt; - acpi_facs_t *facs; - acpi_header_t *dsdt; - - /* Align ACPI tables to 16byte */ - start = ALIGN(start, 16); - current = start; - - printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); - - /* We need at least an RSDP and an RSDT Table */ - rsdp = (acpi_rsdp_t *) current; - current += sizeof(acpi_rsdp_t); - rsdt = (acpi_rsdt_t *) current; - current += sizeof(acpi_rsdt_t); - - /* clear all table memory */ - memset((void *)start, 0, current - start); - - acpi_write_rsdp(rsdp, rsdt, NULL); - acpi_write_rsdt(rsdt); - - /* - * We explicitly add these tables later on: - */ - printk(BIOS_DEBUG, "ACPI: * FACS\n"); - current = ALIGN(current, 64); - facs = (acpi_facs_t *) current; - current += sizeof(acpi_facs_t); - acpi_create_facs(facs); - - printk(BIOS_DEBUG, "ACPI: * DSDT\n"); - dsdt = (acpi_header_t *)current; - memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); - current += dsdt->length; - memcpy(dsdt, &AmlCode, dsdt->length); -#if 0 - dsdt->checksum = 0; // don't trust intel iasl compiler to get this right - dsdt->checksum = acpi_checksum(dsdt,dsdt->length); -#endif - printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); - printk(BIOS_DEBUG, "ACPI: * FADT\n"); - - fadt = (acpi_fadt_t *) current; - current += sizeof(acpi_fadt_t); - - acpi_create_fadt(fadt,facs,dsdt); - acpi_add_table(rsdp,fadt); - - /* If we want IOAPIC Support Linux wants it in MADT. */ - printk(BIOS_DEBUG, "ACPI: * MADT\n"); - madt = (acpi_madt_t *) current; - acpi_create_madt(madt); - current += madt->header.length; - acpi_add_table(rsdp, madt); - - printk(BIOS_INFO, "ACPI: done.\n"); - return current; -} diff --git a/src/mainboard/via/epia-n/board_info.txt b/src/mainboard/via/epia-n/board_info.txt deleted file mode 100644 index d7bb1d9..0000000 --- a/src/mainboard/via/epia-n/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: mini -Board URL: http://www.idotpc.com/TheStore/pc/viewCategories.asp?idCategory=56 diff --git a/src/mainboard/via/epia-n/cmos.layout b/src/mainboard/via/epia-n/cmos.layout deleted file mode 100644 index 9050c3d..0000000 --- a/src/mainboard/via/epia-n/cmos.layout +++ /dev/null @@ -1,72 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 diff --git a/src/mainboard/via/epia-n/devicetree.cb b/src/mainboard/via/epia-n/devicetree.cb deleted file mode 100644 index d17b96d..0000000 --- a/src/mainboard/via/epia-n/devicetree.cb +++ /dev/null @@ -1,101 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 VIA Technologies, Inc. -## (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -chip northbridge/via/cn400 # Northbridge - - device cpu_cluster 0 on # APIC cluster - chip cpu/via/c3 # VIA C3 - device lapic 0 on end # APIC - end - end - - device domain 0 on # PCI domain - device pci 0.0 on end # AGP Bridge - device pci 0.1 on end # Error Reporting - device pci 0.2 on end # Host Bus Control - device pci 0.3 on end # Memory Controller - device pci 0.4 on end # Power Management - device pci 0.7 on end # V-Link Controller - device pci 1.0 on end # PCI Bridge - chip southbridge/via/vt8237r # Southbridge - # Enable both IDE channels. - register "ide0_enable" = "1" - register "ide1_enable" = "1" - # Both cables are 40pin. - register "ide0_80pin_cable" = "0" - register "ide1_80pin_cable" = "0" - device pci f.0 on end # IDE/SATA - device pci f.1 on end # IDE - register "fn_ctrl_lo" = "0xC0" # Disable AC/MC97 - register "fn_ctrl_hi" = "0x9d" # Disable USB Direct & LAN Gating - device pci 10.0 on end # OHCI - device pci 10.1 on end # OHCI - device pci 10.2 on end # OHCI - device pci 10.3 on end # OHCI - device pci 10.4 on end # EHCI - device pci 10.5 off end # USB Direct - device pci 11.0 on # Southbridge LPC - chip superio/winbond/w83697hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 off # IR Port - io 0x60 = 0x000 - end - device pnp 2e.7 off # GPIO 1 - io 0x60 = 0x201 # 0x201 - end - device pnp 2e.8 off # GPIO 5 - io 0x60 = 0x330 # 0x330 - end - device pnp 2e.9 off # GPIO 2, 3,and 4 - io 0x60 = 0x000 # - end - device pnp 2e.a off # ACPI - io 0x60 = 0x000 # - end - device pnp 2e.b on # HWM - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 11.5 off end # AC'97 audio - device pci 11.6 off end # AC'97 Modem - device pci 12.0 on end # Ethernet - end - end -end diff --git a/src/mainboard/via/epia-n/dsdt.asl b/src/mainboard/via/epia-n/dsdt.asl deleted file mode 100644 index f8d47ce..0000000 --- a/src/mainboard/via/epia-n/dsdt.asl +++ /dev/null @@ -1,353 +0,0 @@ -/* - * Minimalist ACPI DSDT table for EPIA-N / NL - * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk - * Heavily based on EPIA-M dstd.asl - * (C) Copyright 2004 Nick Barker Nick.Barker9@btinternet.com - * - */ -DefinitionBlock ("dsdt.aml", "DSDT", 1, "CBT-V2", "CBT-DSDT", 1) -{ - Scope (_PR) - { - Processor (_PR.CPU0, 0x00, 0x00000000, 0x00) {} - } - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * any others would involve declaring the wake up methods - */ - Name (_S0, Package (0x04) - { - 0x00, - 0x00, - 0x00, - 0x00 - }) - Name (_S5, Package (0x04) - { - 0x02, - 0x02, - 0x02, - 0x02 - }) - - /* Global Flag Used to Indicate State of */ - /* ATA Interface */ - Name (ATFL, 0x00) - - /* Root of the bus hierarchy */ - Scope (_SB) - { - - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x01) - Name (_BBN, 0x00) - - /* PCI Routing Table */ - Name (_PRT, Package () { - - Package (0x04) {0x000FFFFF, 0x00, ATAI, 0x00}, // SATA Link A - Package (0x04) {0x000FFFFF, 0x01, ATAI, 0x00}, // SATA Link B - Package (0x04) {0x000FFFFF, 0x02, ATAI, 0x00}, // SATA Link C - Package (0x04) {0x000FFFFF, 0x03, ATAI, 0x00}, // SATA Link D - - Package (0x04) {0x0010FFFF, 0x00, USBI, 0x00}, // USB Link A - Package (0x04) {0x0010FFFF, 0x01, USBI, 0x00}, // USB Link B - Package (0x04) {0x0010FFFF, 0x02, USBI, 0x00}, // USB Link C - Package (0x04) {0x0010FFFF, 0x03, USBI, 0x00}, // USB Link D - - Package (0x04) {0x0011FFFF, 0x00, VT8I, 0x00}, // VT8237 Link A - Package (0x04) {0x0011FFFF, 0x01, VT8I, 0x00}, // VT8237 Link B - Package (0x04) {0x0011FFFF, 0x02, VT8I, 0x00}, // VT8237 Link C - Package (0x04) {0x0011FFFF, 0x03, VT8I, 0x00}, // VT8237 Link D - - Package (0x04) {0x0012FFFF, 0x00, NICI, 0x00}, // LAN Link A - Package (0x04) {0x0012FFFF, 0x01, NICI, 0x00}, // LAN Link B - Package (0x04) {0x0012FFFF, 0x02, NICI, 0x00}, // LAN Link C - Package (0x04) {0x0012FFFF, 0x03, NICI, 0x00}, // LAN Link D - - Package (0x04) {0x0001FFFF, 0x00, 0, 0x10}, // VGA Link A (GSI) - Package (0x04) {0x0001FFFF, 0x01, 0, 0x11}, // VGA Link B (GSI) - Package (0x04) {0x0001FFFF, 0x02, 0, 0x12}, // VGA Link C (GSI) - Package (0x04) {0x0001FFFF, 0x03, 0, 0x13}, // VGA Link D (GSI) - - Package (0x04) {0x0014FFFF, 0x00, 0, 0x12}, // Slot 1 Link C (GSI) - Package (0x04) {0x0014FFFF, 0x01, 0, 0x13}, // Slot 1 Link D (GSI) - Package (0x04) {0x0014FFFF, 0x02, 0, 0x10}, // Slot 1 Link A (GSI) - Package (0x04) {0x0014FFFF, 0x03, 0, 0x11}, // Slot 1 Link B (GSI) - - Package (0x04) {0x0013FFFF, 0x00, 0, 0x13}, // Riser Slot Link D (GSI) - Package (0x04) {0x0013FFFF, 0x01, 0, 0x12}, // Riser Slot Link C (GSI) - Package (0x04) {0x0013FFFF, 0x02, 0, 0x11}, // Riser Slot Link B (GSI) - Package (0x04) {0x0013FFFF, 0x03, 0, 0x10} // Riser Slot Link A (GSI) - - }) - - /* PCI Devices Included Here */ - #include "acpi/sb_physical.asl" - - /* Legacy PNP Devices Defined Here */ - - /* Disable PS2 Mouse Support */ - Device (PS2M) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x09) - } - - Method (_CRS, 0, NotSerialized) - { - Name (BUF1, ResourceTemplate () - { - IRQNoFlags () - {12} - }) - Return (BUF1) - } - } - - /* Disable Legacy PS2 Keyboard Support */ - Device (PS2K) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CID, 0x0B03D041) - Method (_STA, 0, NotSerialized) - { - Return (0x09) - } - - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0060, // Range Minimum - 0x0060, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IO (Decode16, - 0x0064, // Range Minimum - 0x0064, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IRQNoFlags () - {1} - }) - } - - /* Legacy PIC Description */ - Device (PIC) - { - Name (_HID, EisaId ("PNP0000")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0020, // Range Minimum - 0x0020, // Range Maximum - 0x01, // Alignment - 0x02, // Length - ) - IO (Decode16, - 0x00A0, // Range Minimum - 0x00A0, // Range Maximum - 0x01, // Alignment - 0x02, // Length - ) - IRQNoFlags () - {2} - }) - } - - /* Legacy DMA Description */ - Device (DMA1) - { - Name (_HID, EisaId ("PNP0200")) - Name (_CRS, ResourceTemplate () - { - DMA (Compatibility, BusMaster, Transfer8, ) - {4} - IO (Decode16, - 0x0000, // Range Minimum - 0x0000, // Range Maximum - 0x01, // Alignment - 0x10, // Length - ) - IO (Decode16, - 0x0080, // Range Minimum - 0x0080, // Range Maximum - 0x01, // Alignment - 0x11, // Length - ) - IO (Decode16, - 0x0094, // Range Minimum - 0x0094, // Range Maximum - 0x01, // Alignment - 0x0C, // Length - ) - IO (Decode16, - 0x00C0, // Range Minimum - 0x00C0, // Range Maximum - 0x01, // Alignment - 0x20, // Length - ) - }) - } - - /* Legacy Timer Description */ - Device (TMR) - { - Name (_HID, EisaId ("PNP0100")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0040, // Range Minimum - 0x0040, // Range Maximum - 0x01, // Alignment - 0x04, // Length - ) - IRQNoFlags () - {0} - }) - } - - /* Legacy RTC Description */ - Device (RTC) - { - Name (_HID, EisaId ("PNP0B00")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0070, // Range Minimum - 0x0070, // Range Maximum - 0x04, // Alignment - 0x04, // Length - ) - IRQNoFlags () - {8} - }) - } - - /* Legacy Speaker Description */ - Device (SPKR) - { - Name (_HID, EisaId ("PNP0800")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0061, // Range Minimum - 0x0061, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - }) - } - - /* Legacy Math Co-Processor Description */ - Device (COPR) - { - Name (_HID, EisaId ("PNP0C04")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x00F0, // Range Minimum - 0x00F0, // Range Maximum - 0x01, // Alignment - 0x10, // Length - ) - IRQNoFlags () - {13} - }) - } - - /* General Legacy IO Reservations */ - /* Covering items that are not explicitly reserved */ - /* from coreboot. */ - Device (SYSR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (_UID, 0x01) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0010, // Range Minimum - 0x0010, // Range Maximum - 0x01, // Alignment - 0x10, // Length - ) - IO (Decode16, - 0x0022, // Range Minimum - 0x0022, // Range Maximum - 0x01, // Alignment - 0x1E, // Length - ) - IO (Decode16, - 0x0044, // Range Minimum - 0x0044, // Range Maximum - 0x01, // Alignment - 0x1C, // Length - ) - IO (Decode16, - 0x0062, // Range Minimum - 0x0062, // Range Maximum - 0x01, // Alignment - 0x02, // Length - ) - IO (Decode16, - 0x0065, // Range Minimum - 0x0065, // Range Maximum - 0x01, // Alignment - 0x0B, // Length - ) - IO (Decode16, - 0x0074, // Range Minimum - 0x0074, // Range Maximum - 0x01, // Alignment - 0x0C, // Length - ) - IO (Decode16, - 0x0091, // Range Minimum - 0x0091, // Range Maximum - 0x01, // Alignment - 0x03, // Length - ) - IO (Decode16, - 0x00A2, // Range Minimum - 0x00A2, // Range Maximum - 0x01, // Alignment - 0x1E, // Length - ) - IO (Decode16, - 0x00E0, // Range Minimum - 0x00E0, // Range Maximum - 0x01, // Alignment - 0x10, // Length - ) - IO (Decode16, - 0x04D0, // Range Minimum - 0x04D0, // Range Maximum - 0x01, // Alignment - 0x02, // Length - ) - IO (Decode16, - 0x0294, // Range Minimum - 0x0294, // Range Maximum - 0x01, // Alignment - 0x04, // Length - ) - }) - } - - #include "acpi/irq_links.asl" - #include "acpi/pci_init.asl" - - } //End of PCI0 - - } // End of _SB - -} // End of Definition Block diff --git a/src/mainboard/via/epia-n/irq_tables.c b/src/mainboard/via/epia-n/irq_tables.c deleted file mode 100644 index 9c1ee4e..0000000 --- a/src/mainboard/via/epia-n/irq_tables.c +++ /dev/null @@ -1,47 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - * (but if you do, please run checkpir on it to verify) - * - * Contains the IRQ Routing Table dumped directly from your - * memory, which BIOS sets up. - * - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ - -#ifdef GETPIR -#include "pirq_routing.h" -#else -#include <arch/pirq_routing.h> -#endif - -static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0x1c00, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x3227, /* Device */ - 0, /* Miniport */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xf, /* u8 checksum. This has to be set to some - value that would give 0 after the sum of all - bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x14<<3)|0x0, {{0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}}, 0x1, 0x0}, - {0x00,(0x13<<3)|0x0, {{0x05, 0xdeb8}, {0x03, 0xdeb8}, {0x02, 0xdeb8}, {0x01, 0xdeb8}}, 0x2, 0x0}, - {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, - {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, - } -}; -#ifndef GETPIR - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} -#endif diff --git a/src/mainboard/via/epia-n/mptable.c b/src/mainboard/via/epia-n/mptable.c deleted file mode 100644 index de25d0e..0000000 --- a/src/mainboard/via/epia-n/mptable.c +++ /dev/null @@ -1,50 +0,0 @@ -/* generated by MPTable, version 2.0.15*/ -/* as modified by RGM for coreboot */ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &isa_bus); - -/*I/O APICs: APIC ID Version State Address*/ - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - - mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); - -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x42, 0x2, 0x15); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x46, 0x2, 0x16); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x48, 0x2, 0x17); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x3d, 0x2, 0x14); -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, 0x0); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/via/epia-n/romstage.c b/src/mainboard/via/epia-n/romstage.c deleted file mode 100644 index 2ede8d8..0000000 --- a/src/mainboard/via/epia-n/romstage.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 VIA Technologies, Inc. - * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <arch/hlt.h> -#include <console/console.h> -#include "northbridge/via/cn400/raminit.h" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "cpu/x86/bist.h" -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "cpu/x86/lapic/boot_cpu.c" -#include "southbridge/via/vt8237r/early_smbus.c" -#include "superio/winbond/w83697hf/early_serial.c" -#include <spd.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -static const struct mem_controller ctrl = { - .d0f0 = 0x0000, - .d0f2 = 0x2000, - .d0f3 = 0x3000, - .d0f4 = 0x4000, - .d0f7 = 0x7000, - .d1f0 = 0x8000, - .channel0 = { DIMM0 }, -}; - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/via/cn400/raminit.c" - -static void enable_mainboard_devices(void) -{ - device_t dev; - u8 reg; - - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); - if (dev == PCI_DEV_INVALID) - die("Southbridge not found!!!\n"); - - /* bit=0 means enable function (per VT8237R datasheet) - * 7 17.6 MC97 - * 6 17.5 AC97 - * 5 16.1 USB 2 - * 4 16.0 USB 1 - * 3 15.0 SATA and PATA - * 2 16.2 USB 3 - * 1 16.4 USB EHCI - */ - pci_write_config8(dev, 0x50, 0xC0); - - /*bit=0 means enable internal function (per VT8237R datasheet) - * 7 USB Device Mode - *bit=1 means enable internal function (per VT8237R datasheet) - * 6 Reserved - * 5 LAN Controller Clock Gating - * 4 LAN Controller - * 3 Internal RTC - * 2 Internal PS2 Mouse - * 1 Internal KBC Configuration - * 0 Internal Keyboard Controller - */ - pci_write_config8(dev, 0x51, 0x9d); -} - -static void enable_shadow_ram(void) -{ - unsigned char shadowreg; - - shadowreg = pci_read_config8(ctrl.d0f3, 0x82); - /* 0xf0000-0xfffff Read/Write*/ - shadowreg |= 0x30; - pci_write_config8(ctrl.d0f3, 0x82, shadowreg); -} - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - unsigned long x; - device_t dev; - - /* Enable multifunction for northbridge. */ - pci_write_config8(ctrl.d0f0, 0x4f, 0x01); - - w83697hf_set_clksel_48(DUMMY_DEV); - w83697hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - enable_smbus(); - smbus_fixup(&ctrl); - - /* Halt if there was a built-in self test failure. */ - report_bist_failure(bist); - - print_debug("Enabling mainboard devices\n"); - enable_mainboard_devices(); - - print_debug("Enable F-ROM Shadow RAM\n"); - enable_shadow_ram(); - - print_debug("Setup CPU Interface\n"); - c3_cpu_setup(ctrl.d0f2); - - ddr_ram_setup(); - - if (bist == 0) - early_mtrr_init(); -} diff --git a/src/mainboard/via/epia_cn/Kconfig b/src/mainboard/via/epia_cn/Kconfig new file mode 100644 index 0000000..5cba961 --- /dev/null +++ b/src/mainboard/via/epia_cn/Kconfig @@ -0,0 +1,25 @@ +if BOARD_VIA_EPIA_CN + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_C7 + select NORTHBRIDGE_VIA_CN700 + select SOUTHBRIDGE_VIA_VT8237R + select SUPERIO_VIA_VT1211 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default via/epia_cn + +config MAINBOARD_PART_NUMBER + string + default "EPIA-CN" + +config IRQ_SLOT_COUNT + int + default 9 + +endif # BOARD_VIA_EPIA_CN diff --git a/src/mainboard/via/epia_cn/board_info.txt b/src/mainboard/via/epia_cn/board_info.txt new file mode 100644 index 0000000..fbf0866 --- /dev/null +++ b/src/mainboard/via/epia_cn/board_info.txt @@ -0,0 +1,3 @@ +Category: mini +Board name: EPIA-CN10000EG / EPIA-CN13000G +Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... diff --git a/src/mainboard/via/epia_cn/cmos.layout b/src/mainboard/via/epia_cn/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/via/epia_cn/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/via/epia_cn/devicetree.cb b/src/mainboard/via/epia_cn/devicetree.cb new file mode 100644 index 0000000..028cb88 --- /dev/null +++ b/src/mainboard/via/epia_cn/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/via/cn700 # Northbridge + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI + device pci 11.0 on # Southbridge LPC + chip superio/via/vt1211 # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + end + end + device pci 11.5 on end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia_cn/irq_tables.c b/src/mainboard/via/epia_cn/irq_tables.c new file mode 100644 index 0000000..8b137ab --- /dev/null +++ b/src/mainboard/via/epia_cn/irq_tables.c @@ -0,0 +1,53 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x11 << 3) | 0x0, /* Interrupt router device */ + 0xc20, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x596, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x66, /* Checksum */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0e<<3)|0x0, {{0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0x0deb8}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/via/epia_cn/romstage.c b/src/mainboard/via/epia_cn/romstage.c new file mode 100644 index 0000000..20f99cb --- /dev/null +++ b/src/mainboard/via/epia_cn/romstage.c @@ -0,0 +1,95 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <lib.h> +#include "northbridge/via/cn700/raminit.h" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "southbridge/via/vt8237r/early_smbus.c" +#include "southbridge/via/vt8235/early_serial.c" +#include <spd.h> + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/via/cn700/raminit.c" + +static void enable_mainboard_devices(void) +{ + device_t dev; + + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Southbridge not found!!!\n"); + + /* bit=0 means enable function (per CX700 datasheet) + * 5 16.1 USB 2 + * 4 16.0 USB 1 + * 3 15.0 SATA and PATA + * 2 16.2 USB 3 + * 1 16.4 USB EHCI + */ + pci_write_config8(dev, 0x50, 0x80); + + /* bit=1 means enable internal function (per CX700 datasheet) + * 3 Internal RTC + * 2 Internal PS2 Mouse + * 1 Internal KBC Configuration + * 0 Internal Keyboard Controller + */ + pci_write_config8(dev, 0x51, 0x1d); +} + +static const struct mem_controller ctrl = { + .d0f0 = 0x0000, + .d0f2 = 0x2000, + .d0f3 = 0x3000, + .d0f4 = 0x4000, + .d0f7 = 0x7000, + .d1f0 = 0x8000, + .channel0 = { DIMM0 }, +}; + +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + /* Enable multifunction for northbridge. */ + pci_write_config8(ctrl.d0f0, 0x4f, 0x01); + + enable_vt8235_serial(); + console_init(); + enable_smbus(); + smbus_fixup(&ctrl); + report_bist_failure(bist); + enable_mainboard_devices(); + ddr_ram_setup(&ctrl); +} diff --git a/src/mainboard/via/epia_m/Kconfig b/src/mainboard/via/epia_m/Kconfig new file mode 100644 index 0000000..5513975 --- /dev/null +++ b/src/mainboard/via/epia_m/Kconfig @@ -0,0 +1,33 @@ +if BOARD_VIA_EPIA_M || BOARD_VIA_EPIA_MII || BOARD_VIA_EPIA_ML + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_C3 + select NORTHBRIDGE_VIA_VT8623 + select SOUTHBRIDGE_VIA_VT8235 + select SOUTHBRIDGE_RICOH_RL5C476 + select SUPERIO_VIA_VT1211 + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_256 + select ROMCC + select PER_DEVICE_ACPI_TABLES + +config MAINBOARD_DIR + string + default via/epia_m + +if BOARD_VIA_EPIA_M + +config MAINBOARD_PART_NUMBER + string + default "EPIA-M" + +endif # BOARD_VIA_EPIA_M + +config IRQ_SLOT_COUNT + int + default 5 + +endif # BOARD_VIA_EPIA_M || BOARD_VIA_EPIA_MII || BOARD_VIA_EPIA_ML diff --git a/src/mainboard/via/epia_m/acpi_tables.c b/src/mainboard/via/epia_m/acpi_tables.c new file mode 100644 index 0000000..d02bac2 --- /dev/null +++ b/src/mainboard/via/epia_m/acpi_tables.c @@ -0,0 +1,36 @@ +/* + * coreboot ACPI Table support + * written by Stefan Reinauer stepan@openbios.org + * ACPI FADT, FACS, and DSDT table support added by + * Nick Barker nick.barker9@btinternet.com, and those portions + * (C) Copyright 2004 Nick Barker + * (C) Copyright 2005 Stefan Reinauer + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Nothing to do */ + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Nothing to do */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} diff --git a/src/mainboard/via/epia_m/board_info.txt b/src/mainboard/via/epia_m/board_info.txt new file mode 100644 index 0000000..3d084e0 --- /dev/null +++ b/src/mainboard/via/epia_m/board_info.txt @@ -0,0 +1,3 @@ +Category: mini +Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... +Flashrom support: y diff --git a/src/mainboard/via/epia_m/cmos.layout b/src/mainboard/via/epia_m/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/via/epia_m/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/via/epia_m/devicetree.cb b/src/mainboard/via/epia_m/devicetree.cb new file mode 100644 index 0000000..98f6b4f --- /dev/null +++ b/src/mainboard/via/epia_m/devicetree.cb @@ -0,0 +1,61 @@ +chip northbridge/via/vt8623 + + device cpu_cluster 0 on + chip cpu/via/c3 + device lapic 0 on end + end + end + + device domain 0 on + + device pci 0.0 on end + device pci 1.0 on end + + chip southbridge/via/vt8235 + + device pci 10.0 on end # USB 1.1 + device pci 10.1 on end # USB 1.1 + device pci 10.2 on end # USB 1.1 + device pci 10.3 on end # USB 2 + + device pci 11.0 on # Southbridge + chip superio/via/vt1211 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.b on # HWM + io 0x60 = 0xec00 + end + + end + end + + device pci 11.1 on end # IDE + # 2-4 non existant? + device pci 11.5 on end # AC97 Audio + device pci 11.6 off end # AC97 Modem + device pci 12.0 on end # Ethernet + end +# This is on the EPIA MII, not the M. + chip southbridge/ricoh/rl5c476 + register "enable_cf" = "1" + device pci 0a.0 on end + device pci 0a.1 on end + end + end +end diff --git a/src/mainboard/via/epia_m/dsdt.asl b/src/mainboard/via/epia_m/dsdt.asl new file mode 100644 index 0000000..d8553a2 --- /dev/null +++ b/src/mainboard/via/epia_m/dsdt.asl @@ -0,0 +1,256 @@ +/* + * Minimalist ACPI DSDT table for EPIA-M / MII + * (C) Copyright 2004 Nick Barker Nick.Barker9@btinternet.com + * + * + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "COREBOOT", 1) +{ + /* + * Define the main processor + */ + Scope (_PR) + { + Processor (_PR.CPU0, 0x00, 0x00000410, 0x06) {} + } + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * any others would involve declaring the wake up methods + */ + Name (_S0, Package () {0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () {0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Define how interrupt Link A is plumbed in */ + Device (LNKA) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKA + + /* Define how interrupt Link B is plumbed in */ + Device (LNKB) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {9} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKB + + /* Define how interrupt Link C is plumbed in */ + Device (LNKC) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {9} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKC + + /* Define how interrupt Link D is plumbed in */ + Device (LNKD) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + Return (0x0B) + } + /* Current Resources - return irq set up in BIOS */ + Method (_CRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5} + }) + Return (BUFF) + } + /* Possible Resources - return the range of irqs + * we are using for PCI - only here to keep Linux ACPI + * happy + */ + Method (_PRS, 0, NotSerialized) + { + Name (BUFF, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared) {5,9,10} + }) + Return (BUFF) + } + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized ) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + } // End of LNKD + + + /* top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + Name (_PRT, Package () { + /* Epia-MII 6000e cardbus: */ + Package () {0x000AFFFF, 0x00, LNKA, 0x00}, // Cardbus Link A + Package () {0x000AFFFF, 0x01, LNKB, 0x00}, // Cardbus Link B + Package () {0x000AFFFF, 0x02, LNKC, 0x00}, // Cardbus Link C + Package () {0x000AFFFF, 0x03, LNKD, 0x00}, // Cardbus Link D + + Package () {0x000DFFFF, 0x00, LNKB, 0x00}, // Firewire Link B + Package () {0x000DFFFF, 0x01, LNKC, 0x00}, // Firewire Link C + Package () {0x000DFFFF, 0x02, LNKD, 0x00}, // Firewire Linc D + Package () {0x000DFFFF, 0x03, LNKA, 0x00}, // Firewire Link A + + Package () {0x0010FFFF, 0x00, LNKA, 0x00}, // USB Link A + Package () {0x0010FFFF, 0x01, LNKB, 0x00}, // USB Link B + Package () {0x0010FFFF, 0x02, LNKC, 0x00}, // USB Link C + Package () {0x0010FFFF, 0x03, LNKD, 0x00}, // USB Link D + + Package () {0x0011FFFF, 0x00, LNKA, 0x00}, // vt8623 Link A + Package () {0x0011FFFF, 0x01, LNKB, 0x00}, // vt8623 Link B + Package () {0x0011FFFF, 0x02, LNKC, 0x00}, // vt8623 Link C + Package () {0x0011FFFF, 0x03, LNKD, 0x00}, // vt8623 Link D + + Package () {0x0012FFFF, 0x00, LNKA, 0x00}, // LAN Link A + Package () {0x0012FFFF, 0x01, LNKB, 0x00}, // LAN Link B + Package () {0x0012FFFF, 0x02, LNKC, 0x00}, // LAN Link C + Package () {0x0012FFFF, 0x03, LNKD, 0x00}, // LAN Link D + + Package () {0x0013FFFF, 0x00, LNKA, 0x00}, // Riser slot LinkA + Package () {0x0013FFFF, 0x01, LNKB, 0x00}, // Riser slot LinkB + Package () {0x0013FFFF, 0x02, LNKC, 0x00}, // Riser slot LinkC + Package () {0x0013FFFF, 0x03, LNKD, 0x00}, // Riser slot LinkD + + Package () {0x0014FFFF, 0x00, LNKB, 0x00}, // Slot 1, Link B + Package () {0x0014FFFF, 0x01, LNKC, 0x00}, // Slot 1, Link C + Package () {0x0014FFFF, 0x02, LNKD, 0x00}, // Slot 1, Link D + Package () {0x0014FFFF, 0x03, LNKA, 0x00}, // Slot 1, Link A + + Package () {0x0001FFFF, 0x00, LNKA, 0x00}, // VGA Link A + Package () {0x0001FFFF, 0x01, LNKB, 0x00}, // VGA Link B + Package () {0x0001FFFF, 0x02, LNKC, 0x00}, // VGA Link C + Package () {0x0001FFFF, 0x03, LNKD, 0x00} // VGA Link D + + }) + + + } // End of PCI0 + + } // End of _SB + +} // End of Definition Block diff --git a/src/mainboard/via/epia_m/fadt.c b/src/mainboard/via/epia_m/fadt.c new file mode 100644 index 0000000..101ff19 --- /dev/null +++ b/src/mainboard/via/epia_m/fadt.c @@ -0,0 +1,157 @@ +/* + * This file is part of the coreboot project. + * + * (C) Copyright 2004 Nick Barker nick.barker9@btinternet.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <arch/acpi.h> + +void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){ + acpi_header_t *header=&(fadt->header); + + memset((void *)fadt,0,sizeof(acpi_fadt_t)); + memcpy(header->signature,"FACP",4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id,OEM_ID,6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id,ASLC,4); + header->asl_compiler_revision=0; + + fadt->firmware_ctrl=(u32)facs; + fadt->dsdt=(u32)dsdt; + fadt->preferred_pm_profile=0; + fadt->sci_int=5; + fadt->smi_cmd = 0; + fadt->acpi_enable = 0; + fadt->acpi_disable = 0; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0x0; + + fadt->pm1a_evt_blk = 0x400; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = 0x404; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = 0x0; + fadt->pm_tmr_blk = 0x408; + fadt->gpe0_blk = 0x420; + fadt->gpe1_blk = 0x0; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 0; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + fadt->cst_cnt = 0; + fadt->p_lvl2_lat = 90; + fadt->p_lvl3_lat = 900; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 0; + fadt->duty_width = 1; + fadt->day_alrm = 125; + fadt->mon_alrm = 126; + fadt->century = 50; + fadt->iapc_boot_arch = 0x1; + fadt->flags = 0x4a5; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (u32)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 4; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = 0x400; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 2; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = 0x404; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 4; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = 0x408; + fadt->x_pm_tmr_blk.addrh = 0x0; + + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = 0x420; + fadt->x_gpe0_blk.addrh = 0x0; + + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); + +} diff --git a/src/mainboard/via/epia_m/irq_tables.c b/src/mainboard/via/epia_m/irq_tables.c new file mode 100644 index 0000000..1f2634e --- /dev/null +++ b/src/mainboard/via/epia_m/irq_tables.c @@ -0,0 +1,34 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0xc20, /* IRQs devoted exclusively to PCI usage */ + 0, /* Vendor */ + 0, /* Device */ + 0, /* Miniport data */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x68, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, + {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0x0deb8}}, 0x3, 0x0}, + {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x4, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0}, + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/via/epia_m/romstage.c b/src/mainboard/via/epia_m/romstage.c new file mode 100644 index 0000000..3f2a0c4 --- /dev/null +++ b/src/mainboard/via/epia_m/romstage.c @@ -0,0 +1,110 @@ +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include <console/console.h> +#include "northbridge/via/vt8623/raminit.h" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "lib/debug.c" +#include "southbridge/via/vt8235/early_smbus.c" +#include "southbridge/via/vt8235/early_serial.c" + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/via/vt8623/raminit.c" + +static void enable_mainboard_devices(void) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8235), 0); + + if (dev == PCI_DEV_INVALID) { + die("Southbridge not found!!!\n"); + } + pci_write_config8(dev, 0x50, 0x80); + pci_write_config8(dev, 0x51, 0x1f); +#if 0 + // This early setup switches IDE into compatibility mode before PCI gets + // a chance to assign I/Os + // movl $CONFIG_ADDR(0, 0x89, 0x42), %eax + // // movb $0x09, %dl + // movb $0x00, %dl + // PCI_WRITE_CONFIG_BYTE +#endif + /* we do this here as in V2, we can not yet do raw operations + * to pci! + */ + dev += 0x100; /* ICKY */ + + pci_write_config8(dev, 0x04, 7); + pci_write_config8(dev, 0x40, 3); + pci_write_config8(dev, 0x42, 0); + pci_write_config8(dev, 0x3c, 0xe); + pci_write_config8(dev, 0x3d, 0); +} + +static void enable_shadow_ram(void) +{ + device_t dev = 0; /* no need to look up 0:0.0 */ + unsigned char shadowreg; + /* dev 0 for southbridge */ + shadowreg = pci_read_config8(dev, 0x63); + /* 0xf0000-0xfffff */ + shadowreg |= 0x30; + pci_write_config8(dev, 0x63, shadowreg); +} + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + device_t dev; + + /* Enable VGA; 32MB buffer. */ + pci_write_config8(0, 0xe1, 0xdd); + + /* + * Disable the firewire stuff, which apparently steps on IO 0+ on + * reset. Doh! + */ + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_6305), 0); + if (dev != PCI_DEV_INVALID) + pci_write_config8(dev, 0x15, 0x1c); + + enable_vt8235_serial(); + console_init(); + + enable_smbus(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + // init_timer(); + + post_code(0x05); + + print_debug(" Enabling mainboard devices\n"); + enable_mainboard_devices(); + + print_debug(" Enabling shadow ram\n"); + enable_shadow_ram(); + + ddr_ram_setup((const struct mem_controller *)0); + + if (bist == 0) + early_mtrr_init(); + + //dump_pci_devices(); +} diff --git a/src/mainboard/via/epia_m700/Kconfig b/src/mainboard/via/epia_m700/Kconfig new file mode 100644 index 0000000..96984da --- /dev/null +++ b/src/mainboard/via/epia_m700/Kconfig @@ -0,0 +1,28 @@ +if BOARD_VIA_EPIA_M700 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_C7 + select NORTHBRIDGE_VIA_VX800 + select SUPERIO_WINBOND_W83697HF + select HAVE_PIRQ_TABLE + # Note: For ACPI, you need to use the 'get_dsdt' script and uncomment + # the "select HAVE_ACPI_TABLES" line below. + # select HAVE_ACPI_TABLES + # select PER_DEVICE_ACPI_TABLES + select HAVE_OPTION_TABLE + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default via/epia_m700 + +config MAINBOARD_PART_NUMBER + string + default "EPIA-M700" + +config IRQ_SLOT_COUNT + int + default 13 + +endif # BOARD_VIA_EPIA_M700 diff --git a/src/mainboard/via/epia_m700/acpi_tables.c b/src/mainboard/via/epia_m700/acpi_tables.c new file mode 100644 index 0000000..c841f2c --- /dev/null +++ b/src/mainboard/via/epia_m700/acpi_tables.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * LinuxBIOS ACPI Table support + * written by Stefan Reinauer stepan@openbios.org + * ACPI FADT, FACS, and DSDT table support added by + * Nick Barker nick.barker9@btinternet.com, and those portions + * (C) Copyright 2004 Nick Barker + * (C) Copyright 2005 Stefan Reinauer + * (C) Copyright 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Most parts of this file copied from asus\a8v-e_se\acpi_tables.c, + * acpi_is_wakeup() is from Rudolf's S3 patch and SSDT was added. + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "northbridge/via/vx800/vx800.h" + +extern const unsigned char AmlCode_dsdt[]; +extern const unsigned char AmlCode_ssdt[]; + +extern u32 wake_vec; + +/* + * These four macros are copied from <arch/smp/mpspec.h>, I have to do this + * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since + * mainboard/via/... have no mptable.c (so that I can not set + * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. + * So I have to copy these four to here. acpi_fill_madt() needs this. + */ +#define MP_IRQ_POLARITY_HIGH 0x1 +#define MP_IRQ_POLARITY_LOW 0x3 +#define MP_IRQ_TRIGGER_EDGE 0x4 +#define MP_IRQ_TRIGGER_LEVEL 0xc + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* NO MCFG in VX855, no PCI-E. */ + return current; +} + +unsigned long acpi_create_madt_lapic_nmis(unsigned long current, u16 flags, + u8 lint) +{ + device_t cpu; + int cpu_index = 0; + + for (cpu = all_devices; cpu; cpu = cpu->next) { + if ((cpu->path.type != DEVICE_PATH_APIC) || + (cpu->bus->dev->path.type != DEVICE_PATH_CPU_CLUSTER)) { + continue; + } + if (!cpu->enabled) + continue; + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, cpu_index, flags, lint); + cpu_index++; + } + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VX800SB_APIC_ID, VX800SB_APIC_BASE, 0); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + /* Not implemented. */ + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT. */ + return current; +} diff --git a/src/mainboard/via/epia_m700/board_info.txt b/src/mainboard/via/epia_m700/board_info.txt new file mode 100644 index 0000000..9204d80 --- /dev/null +++ b/src/mainboard/via/epia_m700/board_info.txt @@ -0,0 +1,6 @@ +Category: mini +Board URL: http://www.viaembedded.com/en/products/boards/670/1/EPIA-M700_%28EOL%29.html +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/via/epia_m700/cmos.layout b/src/mainboard/via/epia_m700/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/via/epia_m700/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/via/epia_m700/devicetree.cb b/src/mainboard/via/epia_m700/devicetree.cb new file mode 100644 index 0000000..2f971c2 --- /dev/null +++ b/src/mainboard/via/epia_m700/devicetree.cb @@ -0,0 +1,24 @@ +chip northbridge/via/vx800 # Northbridge + device domain 0 on + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + # device pci f.0 on end # IDE/SATA + # device pci f.1 on end # IDE + # device pci 10.0 on end # USB 1.1 + # device pci 10.1 on end # USB 1.1 + # device pci 10.2 on end # USB 1.1 + # device pci 10.4 on end # USB 2.0 + # device pci 11.0 on # Southbridge LPC + # end + end + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c7 # VIA C7 + device lapic 0 on end # APIC + end + end +end diff --git a/src/mainboard/via/epia_m700/driving_clk_phase_data.c b/src/mainboard/via/epia_m700/driving_clk_phase_data.c new file mode 100644 index 0000000..6b0afa4 --- /dev/null +++ b/src/mainboard/via/epia_m700/driving_clk_phase_data.c @@ -0,0 +1,237 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "northbridge/via/vx800/driving_clk_phase_data.h" + +// DQS Driving +// Reg0xE0, 0xE1 +// According to #Bank to set DRAM DQS Driving +// #Bank 1 2 3 4 5 6 7 8 +static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE }; +static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE }; + +// DQ Driving +// Reg0xE2, 0xE3 +// For DDR2: According to bank to set DRAM DQ Driving +static const u8 DDR2_DQA_Driving_Table[4] = { 0xAC, 0xAC, 0xAC, 0xAC }; +static const u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA }; + +// CS Driving +// Reg0xE4, 0xE5 +// According to #Bank to set DRAM CS Driving +// DDR1 #Bank 1 2 3 4 5 6 7 8 +static const u8 DDR2_CSA_Driving_Table_x8[4] = { 0x44, 0x44, 0x44, 0x44 }; +static const u8 DDR2_CSB_Driving_Table_x8[2] = { 0x44, 0x44 }; +static const u8 DDR2_CSA_Driving_Table_x16[4] = { 0x44, 0x44, 0x44, 0x44 }; +static const u8 DDR2_CSB_Driving_Table_x16[2] = { 0x44, 0x44 }; + +// MAA Driving +// Reg0xE8, Reg0xE9 +static const u8 DDR2_MAA_Driving_Table[MA_Table][5] = { + // Chip number, 400, 533, 667 800 ;(SRAS, SCAS, SWE)RxE8 + {6, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 00 ~ 06 + {18, 0x86, 0x86, 0x86, 0x86}, // total MAA chips = 06 ~ 18 + {255, 0xDB, 0xDB, 0xDB, 0xDB}, // total MAA chips = 18 ~ +}; + +static const u8 DDR2_MAB_Driving_Table[MA_Table][2] = { + // Chip number, Value ;(SRAS, SCAS, SWE)RxE9 + {6, 0x86}, // total MAB chips = 00 ~ 06 + {18, 0x86}, // total MAB chips = 06 ~ 18 + {255, 0xDB}, // total MAB chips = 18 ~ +}; + +// DCLK Driving +// Reg0xE6, 0xE7 +// For DDR2: According to #Freq to set DRAM DCLK Driving +// freq 400M, 533M, 667M, 800M +static const u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; +static const u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; + +/* + * Duty cycle + * Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB + * D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF + * According to DRAM frequency to control Duty Cycle + */ +static const u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0xEC, 0x00, 0x30, 0x30, 0x30, 0x30}, // 1Rank + {0xEE, 0x0F, 0x40, 0x40, 0x00, 0x00}, + {0xEF, 0xCF, 0x00, 0x30, 0x30, 0x30}, +}; + +static const u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0xED, 0x00, 0x88, 0x88, 0x84, 0x88}, // 1Rank + {0xEE, 0xF0, 0x00, 0x00, 0x00, 0x00}, + {0xEF, 0xFC, 0x00, 0x00, 0x00, 0x00}, +}; + +/* + * DRAM Clock Phase Control for FeedBack Mode + * Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94 + * Processing: + * 1. Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode. + * 2. Program clock phase value with ChA/B DCLK enable, + * VIA_NB3DRAM_REG91[7:3]=00b + * 3. Check ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO + * ChA DCLKO can't be disabled, so always program VIA_NB3DRAM_REG91[3]=0b. + */ +static const u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank + {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02}, + {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03}, +}; + +static const u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0x0F, 0x20, 0x10, 0x00, 0x70}, // 1Rank + {0x92, 0x0F, 0x40, 0x30, 0x30, 0x20}, + {0x93, 0x0F, 0x60, 0x50, 0x40, 0x30}, +}; + +/* vt6413c */ +#if 0 +static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x04, 0x03, 0x04, 0x01 }, // 1Rank + {0x92, 0xF8, 0x03, 0x06, 0x05, 0x04 }, + {0x93, 0xF8, 0x03, 0x07, 0x06, 0x05 }, +}; +#endif + +/* vt6413d */ +static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x91, 0xF8, 0x02, 0x01, 0x00, 0x07}, // 1Rank + {0x92, 0xF8, 0x04, 0x03, 0x03, 0x02}, + {0x93, 0xF8, 0x06, 0x05, 0x04, 0x03}, +}; + +/* + * DRAM Write Data phase control + * Modify NB Reg: Rx74/Rx75/Rx76 + */ +/* vt6413c */ +#if 0 +static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0xF8, 0x03, 0x04, 0x05, 0x02 }, // 1Rank + {0x75, 0xF8, 0x03, 0x04, 0x05, 0x02 }, + {0x76, 0x00, 0x10, 0x80, 0x00, 0x07 }, +}; +#endif + +/* vt6413D */ +static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM][WrtData_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0xF8, 0x01, 0x00, 0x00, 0x07}, // 1Rank + {0x75, 0xF8, 0x01, 0x00, 0x00, 0x07}, + {0x76, 0x10, 0x80, 0x87, 0x07, 0x06}, + {0x8C, 0xFC, 0x03, 0x03, 0x03, 0x03}, +}; + +#if 0 +static const u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 }, // 1Rank + {0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 }, + {0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 }, +}; +#endif + +/* + * DQ/DQS Output Delay Control + * Modify NB D0F3: RxF0/RxF1/RxF2/RxF3 + */ +static const u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = { + //RxF0 RxF1 RxF2 RxF3 + {0x00, 0x00, 0x00, 0x00}, /* DDR400 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR533 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR667 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR800 */ +}; + +static const u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = { + //RxF4 RxF5 RxF6 RxF7 + {0x00, 0x00, 0x00, 0x00}, /* DDR400 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR533 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR667 */ + {0x00, 0x00, 0x00, 0x00}, /* DDR800 */ +}; + +/* + * DQ/DQS input Capture Control + * modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B + */ +/* vt6413C */ +#if 0 +static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x78, 0x00, 0x83, 0x8D, 0x87, 0x83 }, // 1Rank + {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 }, + {0x7B, 0x00, 0x10, 0x30, 0x20, 0x10 } +}; +#endif + +/* vt6413D */ +static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x78, 0xC0, 0x0D, 0x07, 0x03, 0x01}, // 1Rank + {0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00}, + {0x7B, 0x00, 0x34, 0x34, 0x20, 0x10} +}; + +static const u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = { + // (And NOT) DDR800 DDR667 DDR533 DDR400 + //Reg Mask Value Value Value Value + {0x79, 0x00, 0x89, 0x89, 0x87, 0x83}, // 1Rank + {0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00}, + {0x8B, 0x00, 0x34, 0x34, 0x20, 0x10} +}; + +static const u8 Fixed_DQSA_1_2_Rank_Table[4][2] = { + //Rx70 Rx71 + {0x00, 0x05}, /* DDR800 */ + {0x00, 0x06}, /* DDR667 */ + {0x00, 0x04}, /* DDR533 */ + {0x00, 0x05}, /* DDR400 */ +}; + +static const u8 Fixed_DQSA_3_4_Rank_Table[4][2] = { + //Rx70 Rx71 + {0x00, 0x04}, /* DDR800 */ + {0x00, 0x04}, /* DDR667 */ + {0x00, 0x03}, /* DDR533 */ + {0x00, 0x04}, /* DDR400 */ +}; diff --git a/src/mainboard/via/epia_m700/fadt.c b/src/mainboard/via/epia_m700/fadt.c new file mode 100644 index 0000000..7a1d944 --- /dev/null +++ b/src/mainboard/via/epia_m700/fadt.c @@ -0,0 +1,171 @@ +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + * + * Copyright (C) 2004 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <arch/acpi.h> +#include "northbridge/via/vx800/vx800.h" + +void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 3; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32)facs; + fadt->dsdt = (u32)dsdt; + fadt->preferred_pm_profile = 0; + fadt->sci_int = 0x9; + + fadt->smi_cmd = VX800_ACPI_IO_BASE + 0x2F; + fadt->acpi_enable = 0xA1; + fadt->acpi_disable = 0xA0; + + /* + * Value 42F,A1,A0, if we don't want SMI, then set them to zero. + * fadt->smi_cmd = 0x0; + * fadt->acpi_enable = 0x0; + * fadt->acpi_disable = 0x0; + */ + + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0x0; + + fadt->pm1a_evt_blk = VX800_ACPI_IO_BASE; + fadt->pm1b_evt_blk = 0x0; + fadt->pm1a_cnt_blk = VX800_ACPI_IO_BASE + 0x4; + fadt->pm1b_cnt_blk = 0x0; + fadt->pm2_cnt_blk = 0x22; /* To support cpu-c3. */ + /* fadt->pm2_cnt_blk = 0x0; */ + fadt->pm_tmr_blk = VX800_ACPI_IO_BASE + 0x8; + fadt->gpe0_blk = VX800_ACPI_IO_BASE + 0x20; + fadt->gpe1_blk = VX800_ACPI_IO_BASE + 0x50; + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; /* To support cpu-c3. */ + /* fadt->pm2_cnt_len = 0; */ + + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 4; + fadt->gpe1_blk_len = 4; + fadt->gpe1_base = 0x10; + fadt->cst_cnt = 0; + + fadt->p_lvl2_lat = 0x50; /* This is the coreboot source. */ + fadt->p_lvl3_lat = 0x320; + /* fadt->p_lvl2_lat = 0x80; */ + /* fadt->p_lvl3_lat = 0x800; */ + /* fadt->p_lvl2_lat = 0x1; */ + /* fadt->p_lvl3_lat = 0x23; */ + + /* fadt->p_lvl2_lat = 0x200; */ /* Disable. */ + /* fadt->p_lvl3_lat = 0x2000; */ + + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 0; + /* fadt->duty_width = 1; */ + fadt->duty_width = 4; + fadt->day_alrm = 0x7d; + fadt->mon_alrm = 0x7e; + fadt->century = 0x32; + fadt->iapc_boot_arch = 0x0; + fadt->flags = 0xa5; + + fadt->reset_reg.space_id = 0; + fadt->reset_reg.bit_width = 0; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0x0; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 0; + fadt->x_firmware_ctl_l = (u32)facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32)dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 4; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = VX800_ACPI_IO_BASE; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 2; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = VX800_ACPI_IO_BASE + 0x4; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + /* fadt->x_pm2_cnt_blk.space_id = 1; */ + fadt->x_pm2_cnt_blk.space_id = 0; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = 0x0; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 4; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = VX800_ACPI_IO_BASE + 0x8; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 0; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = VX800_ACPI_IO_BASE + 0x20; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0x0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/via/epia_m700/get_dsdt b/src/mainboard/via/epia_m700/get_dsdt new file mode 100755 index 0000000..bd077c2 --- /dev/null +++ b/src/mainboard/via/epia_m700/get_dsdt @@ -0,0 +1,43 @@ +#!/bin/bash +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 One Laptop per Child, Association, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# Simple script to dump the factory ACPI DSDT and convert it to C. +# Must be run as root on some systems, and always run on the target machine. + +if [ ! iasl ]; then + echo "Intel ASL Compiler required to recompile DSDT table." +fi + +if [ ! -f /proc/acpi/dsdt ]; then + echo "Cannot find DSDT table, check that your kernel supports and uses ACPI." +fi + +cat /proc/acpi/dsdt > dsdt +if [ ! -f dsdt ]; then + echo "Failed copying DSDT, please check your permissions." +fi + +iasl -d -vr -vs dsdt +iasl -tc -vr -vs dsdt.dsl +mv dsdt.hex dsdt.c +echo "Done, cleaning up." +rm -f dsdt dsdt.dsl dsdt.aml dsdt.hex +exit diff --git a/src/mainboard/via/epia_m700/irq_tables.c b/src/mainboard/via/epia_m700/irq_tables.c new file mode 100644 index 0000000..7cb4623 --- /dev/null +++ b/src/mainboard/via/epia_m700/irq_tables.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x11 << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0xca0, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x596, /* Device */ + 0, /* Miniport */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0xdb, /* Checksum. 0xa0? */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x1, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x2, 0x0}, + {0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x3, 0x0}, + {0x04, (0x04 << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}}, 0x4, 0x0}, + {0x04, (0x0e << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x5, 0x0}, + {0x00, (0x11 << 3) | 0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x0f << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x01 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + } +}; + +inline unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/via/epia_m700/romstage.c b/src/mainboard/via/epia_m700/romstage.c new file mode 100644 index 0000000..b00ece1 --- /dev/null +++ b/src/mainboard/via/epia_m700/romstage.c @@ -0,0 +1,666 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Part of this file is from cx700 port, part of is from cn700 port, + * and acpi_is_wakeup_early_via_VX800() is part of Rudolf's S3 patch. + */ + +#define PAYLOAD_IS_SEABIOS 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <lib.h> +#include "northbridge/via/vx800/vx800.h" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include <string.h> +/* This file contains the board-special SI value for raminit.c. */ +#include "driving_clk_phase_data.c" +#include "northbridge/via/vx800/raminit.h" +#include "northbridge/via/vx800/raminit.c" +#include "wakeup.h" +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83697hf/w83697hf.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +/* + * This acpi_is_wakeup_early_via_VX800 is from Rudolf's patch on the list: + * http://www.coreboot.org/pipermail/coreboot/2008-January/028787.html. + */ +static int acpi_is_wakeup_early_via_vx800(void) +{ + device_t dev; + u16 tmp, result; + + print_debug("In acpi_is_wakeup_early_via_vx800\n"); + /* Power management controller */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX855_LPC), 0); + + if (dev == PCI_DEV_INVALID) + die("Power management controller not found\n"); + + /* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */ + pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1); + + /* Enable ACPI access RTC signal gated with PSON. */ + pci_write_config8(dev, 0x81, 0x84); + + tmp = inw(VX800_ACPI_IO_BASE + 0x04); + result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; + print_debug(" boot_mode="); + print_debug_hex16(result); + print_debug("\n"); + return result; +} + +/* All content of this function came from the cx700 port of coreboot. */ +static void enable_mainboard_devices(void) +{ + device_t dev; +#if 0 + /* + * Add and close this switch, since some line cause error, some + * written at elsewhere (stage1 stage2). + */ + u8 regdata; + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX855_LPC), 0); + + /* Disable GP3. */ + pci_write_config8(dev, 0x98, 0x00); + + pci_write_config8(dev, 0x50, 0x80); /* Disable mc97. */ + + /* + * Martin: Disable internal KBC configuration. + * + * Internal Config is needed to decide which key can be pressed to + * resume from s3. + */ + pci_write_config8(dev, 0x51, 0x2d); + + /* This causes irq0 can not be triggerd, since bit 5 was set to 0. */ + /* pci_write_config8(dev, 0x58, 0x42); */ + + /* These writing may... TODO */ + regdata = pci_read_config8(dev, 0x58); + regdata |= 0x41; + pci_write_config8(dev, 0x58, regdata); + pci_write_config8(dev, 0x59, 0x80); + pci_write_config8(dev, 0x5b, 0x01); +#endif + + print_debug("In enable_mainboard_devices\n"); + + /* Enable P2P Bridge Header for external PCI bus. */ + dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0); + pci_write_config8(dev, 0x4f, 0x41); + + /* + * "5324" already is the default value of the PCI IDE device, cancel + * this PCI write. + * + * [william 20080124]: Fix bug that can not boot Ubuntu at the + * beginning time. + */ +#if 0 + dev = 0; + dev = pci_locate_device(PCI_ID(0x1106, PCI_DEVICE_ID_VIA_VX855_IDE), 0); + + uint16_t values; + values = pci_read_config16(dev, 0xBA); + values &= ~0xffff; + values |= 0x5324; + pci_write_config16(dev, 0xBA, values); +#endif +} + +/* + * Most content of this function came from the cx700 port of coreboot. + * Turn on the shadow of E-seg. + */ +static void enable_shadow_ram(void) +{ + uint8_t shadowreg; + + /* + * Changed the value from 0x2a to 0x3f. "read only" may block "write"? + * and maybe in C-seg "write" will be needed? + */ + pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff); + + /* 0xf0000-0xfffff - ACPI tables */ + shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83); + shadowreg |= 0x30; + pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg); + + /* 0xe0000-0xeffff - elfload? */ + /* + * In s3 resume process, wakeup.c, I use E-seg to hold the code + * (which can not locate in the area to be covered) that will copy + * 0-A-seg and F-seg from TOP-mem back to their normal location. + */ + pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff); + +#if 0 + /* Enable shadow RAM as normal DRAM */ + /* 0xc0000-0xcffff - VGA BIOS */ + pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0x2a); + pci_write_config8(PCI_DEV(0, 0, 7), 0x61, 0x00); + /* 0xd0000-0xdffff - ?? */ + /* pci_write_config8(PCI_DEV(0, 0, 3), 0x81, 0xff); */ + /* pci_write_config8(PCI_DEV(0, 0, 7), 0x62, 0xff); */ + + /* Do it again for the vlink controller. */ + shadowreg = pci_read_config8(PCI_DEV(0, 0, 7), 0x63); + shadowreg |= 0x30; + pci_write_config8(PCI_DEV(0, 0, 7), 0x63, shadowreg); +#endif +} + +/* + * Added this table 2008-11-28. + * This table contains the value needed to be set before begin to init DRAM. + * Note: REV_Bx should be checked for changes when porting a new board! + */ +static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = { + /* VT3409 no PCI-E */ + { 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E }, // Set Exxxxxxx as pcie mmio config range + { 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B }, // Support extended cfg address of pcie + // {Â 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control + // Set ROMSIP value by software + + /* + { 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pullup Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pulldown Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pullup Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pulldown Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21 }, // Memory I/F timing ctrl + { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1 }, // Memory I/F timing ctrl + { 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18 }, // AGTL+ I/O Circuit + { 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C }, // AGTL+ Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33 }, // 2X AGTL+ Auto Compensation Offset + { 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33 }, // 4X AGTL+ Auto Compensation Offset + { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72 }, // AGTL Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77 }, // AGTL Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44 }, // Input Host Address / Host Strobe Delay Control for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22 }, // Input Host Address / Host Strobe Delay Control for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00 }, // Output Delay Control of PAD for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA }, // Host Address / Address Clock Output Delay Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 1 + { 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 2 + { 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00 }, // Output Delay of PAD for HDSTB + { 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00 }, // Output Delay of PAD for HD + { 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 0) + { 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 1) + { 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 2) + { 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 3) + */ + + // CPU Host Bus Control + { 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08 }, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8 + // { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + { 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB }, // CPU I/F Ctrl-2: Enable all for performance + // { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88 }, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK + { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44 }, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK + { 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C }, // Misc Ctrl: Enable 8QW burst Mem Access + // { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06 }, // Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04 }, // Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63 }, // Write Policy 1 + // { 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01 }, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL + // { 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00 }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2 }, // Write Policy + { 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88 }, // Bandwidth Timer + { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46 }, // CPU Misc Ctrl + // { 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B }, // CPU Miscellaneous Control 3 + // { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41 }, // CPU Miscellaneous Control 3 + { 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06 }, // CPU Miscellaneous Control 4 + + // Set APIC and SMRAM + { 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00 }, // APIC Related Control + { 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29 }, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg + { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } // End of the table +}; + +#define USE_VCP 1 /* 0 means "use DVP". */ +#define USE_COM1 1 +#define USE_COM2 0 + +#define gCom1Base 0x3f8 +#define gCom2Base 0x2f8 + +#if 0 +static void EmbedComInit(void) +{ + u8 ByteVal; + u16 ComBase; + + /* Enable NB multiple function control. */ + ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f); + ByteVal = ByteVal | 0x01; + pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal); + + /* VGA enable. */ + ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1); + ByteVal = ByteVal | 0x80; + pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal); + + ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7); + ByteVal = ByteVal | 0x08; + pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal); + + /* Enable P2P IO/mem. */ + ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4); + ByteVal = ByteVal | 0x07; + pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal); + + /* Turn on graphic chip I/O port port access. */ + ByteVal = inb(0x3C3); + ByteVal = ByteVal | 0x01; + outb(ByteVal, 0x3C3); + + /* Turn off graphic chip register protection. */ + outb(0x10, 0x3C4); + ByteVal = inb(0x3C5); + ByteVal = ByteVal | 0x01; + outb(ByteVal, 0x3C5); + + /* South module pad share enable 0x3C5.78[7]. */ + outb(0x78, 0x3C4); + ByteVal = inb(0x3C5); + ByteVal = ByteVal | 0x80; + outb(ByteVal, 0x3C5); + + /* Enable UART function multiplex with DVP or VCP pad D17F0Rx46[7,6]. */ + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46); + if (USE_VCP == 1) + ByteVal = (ByteVal & 0x3F) | 0x40; /* Multiplex with VCP. */ + else + ByteVal = (ByteVal & 0x3F) | 0xC0; /* Multiplex with DVP. */ + pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal); + + /* Enable embedded COM1 and COM2 D17F0RxB0[5,4]. */ + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0); + ByteVal = ByteVal & 0xcf; + /* Multiplex with VCP. */ + if (USE_COM1 == 1) + ByteVal = ByteVal | 0x10; + if (USE_COM2 == 1) + ByteVal = ByteVal | 0x20; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal); + + if (USE_COM1 == 1) + ComBase = gCom1Base; + else + ComBase = gCom2Base; + +//noharddrive + + /* Set embedded COM1 I/O base = 0x3E8 (D17F0RB4, ByteVal = 0xFD) */ + if (USE_COM1 == 1) { + ByteVal = (u8) ((gCom1Base >> 3) | 0x80); + pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal); + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); + ByteVal = (ByteVal & 0xf0) | 0x04; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); + } + + /* Set embedded COM2 I/O base = 0x2E8 (D17F0RB5, ByteVal = 0xDD). */ + if (USE_COM2 == 1) { + ByteVal = (u8) ((gCom2Base >> 3) | 0x80); + pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal); + ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2); + ByteVal = (ByteVal & 0x0f) | 0x30; + pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal); + } + /* No port 80 biger then 0x10. */ + + /* Disable interrupt. */ + ByteVal = inb(ComBase + 3); + outb(ByteVal & 0x7F, ComBase + 3); + outb(0x00, ComBase + 1); + + /* Set BAUD rate. */ + ByteVal = inb(ComBase + 3); + outb(ByteVal | 0x80, ComBase + 3); + outb(0x01, ComBase); + outb(0x00, ComBase + 1); + + /* Set frame format. */ + ByteVal = inb(ComBase + 3); + outb(ByteVal & 0x3F, ComBase + 3); + outb(0x03, ComBase + 3); + outb(0x00, ComBase + 2); + outb(0x00, ComBase + 4); + + /* SOutput("Embedded COM output\n"); */ + /* while(1); */ +} +#endif + +/* cache_as_ram.inc jumps to here. */ +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u16 boot_mode; + u8 rambits, Data8, Data; + device_t device; + /* device_t dev; */ + + /* + * Enable multifunction for northbridge. These 4 lines (until + * console_init()) are the same with epia-cn port. + */ + pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01); + /* EmbedComInit(); */ + w83697hf_set_clksel_48(DUMMY_DEV); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + /* enable_vx800_serial(); */ + + /* + * 1. D15F0 + * a) RxBAh = 71h + * b) RxBBh = 05h + * c) RxBEh = 71h + * d) RxBFh = 05h + * + * 2. D17F0 + * a) RxA0h = 06h + * b) RxA1h = 11h + * c) RxA2h = 27h + * d) RxA3h = 32h + * e) Rx79h = 40h + * f) Rx72h = 27h + * g) Rx73h = 32h + */ + + pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA, + PCI_DEVICE_ID_VIA_VX855_IDE); + pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE, + PCI_DEVICE_ID_VIA_VX855_IDE); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2, + PCI_DEVICE_ID_VIA_VX855_LPC); + Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79); + Data8 &= ~0x40; + Data8 |= 0x40; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8); + pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72, + PCI_DEVICE_ID_VIA_VX855_LPC); + + /* + * There are two function definitions of console_init(), while the + * src/arch/x86/lib is the right one. + */ + console_init(); + + /* Decide if this is a s3 wakeup or a normal boot. */ + boot_mode = acpi_is_wakeup_early_via_vx800(); + + /* + * 2008-11-27 Add this, to transfer "cpu restart" to "cold boot". + * When this boot is not a S3 resume, and PCI registers had been + * written, then this must be a CPU restart (result of OS reboot cmd), + * so we need a real "cold boot". + */ + if ((boot_mode != 3) + && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) { + outb(6, 0xcf9); + } + + /* x86 cold boot I/O cmd. */ + /* These 2 lines are the same with epia-cn port. */ + enable_smbus(); + + /* This fix does help vx800!, but vx855 doesn't need this. */ + /* smbus_fixup(&ctrl); */ + + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + print_debug("Enabling mainboard devices\n"); + enable_mainboard_devices(); + + /* + * Get NB chip revision from D0F4RxF6, revision will be used in + * via_pci_inittable. + */ + device = PCI_DEV(0, 0, 4); + Data = pci_read_config8(device, 0xf6); + print_debug("NB chip revision ="); + print_debug_hex8(Data); + print_debug("\n"); + + /* Make NB ready before DRAM init. */ + via_pci_inittable(Data, mNbStage1InitTbl); + + /* + * When resume from s3, DRAM init is skipped, so need to recovery + * any PCI register related to DRAM init. d0f3 didn't lose its power + * during whole s3 time, so any register not belonging to d0f3 needs + * to be recovered. + */ +#if 1 + if (boot_mode == 3) { + u8 i; + u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; + DRAM_SYS_ATTR DramAttr; + + print_debug("This is an S3 wakeup\n"); + + memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); + /* + * Step 1: DRAM detection; DDR1 or DDR2; Get SPD Data; + * Rank Presence; 64 or 128bit; Unbuffered or registered; + * 1T or 2T. + */ + DRAMDetect(&DramAttr); + + /* + * Begin to get RAM size, 43,42 41 40 contains the end + * address of last rank in DDR2 slot. + */ + device = PCI_DEV(0, 0, 3); + for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) { + rambits = pci_read_config8(device, ramregs[i]); + if (rambits != 0) + break; + } + + DRAMDRDYSetting(&DramAttr); + + Data = 0x80; /* This value is same with DevInit.c. */ + pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data); + pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2); + Data = pci_read_config8(MEMCTRL, 0x88); + pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data); + + /* Just copy this function from draminit to here! */ + DRAMRegFinalValue(&DramAttr); + + /* Just copy this function from draminit to here! */ + SetUMARam(); + + print_debug("Resume from S3, RAM init was ignored\n"); + } else { + ddr2_ram_setup(); + ram_check(0, 640 * 1024); + } +#endif + + /* ddr2_ram_setup(); */ + /* This line is the same with cx700 port. */ + enable_shadow_ram(); + + /* + * For coreboot most time of S3 resume is the same as normal boot, + * so some memory area under 1M become dirty, so before this happen, + * I need to backup the content of mem to top-mem. + * + * I will reserve the 1M top-men in LBIO table in coreboot_table.c + * and recovery the content of 1M-mem in wakeup.c. + */ +#if PAYLOAD_IS_SEABIOS == 1 + if (boot_mode == 3) { + /* An idea of Libo.Feng at amd.com in http://www.coreboot.org/pipermail/coreboot/2008-December/043111.html + * + * I want move the 1M data, I have to set some MTRRs myself. + * Setting MTRR before back memory save s3 resume time about + * 0.14 seconds. + * + * !!! Since CAR stack uses cache, and we are using cache + * here, we must be careful: + * + * 1. during this MTRR code, must no function call (after + * this MTRR, I think it should be OK to use function). + * 2. Before stack switch, no use variable that have value + * set before this. + * 3. Due to 2, take care of "cpu_reset", I directlly set it + * to ZERO. + */ + u32 memtop = *(u32 *) WAKE_MEM_INFO; + u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000; + u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000; + u32 memtop3 = *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000; + u32 memtop4 = + *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 + 0xe0000; +#if 0 + __asm__ volatile ( + "movl $0x204, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl %0,%%eax\n\t" + "orl $(0 | 6), %%eax\n\t" + "wrmsr\n\t" + + "movl $0x205, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl $0x100000,%%eax\n\t" + "decl %%eax\n\t" + "notl %%eax\n\t" + "orl $(0 | 0x800), %%eax\n\t" + "wrmsr\n\t" + ::"g"(memtop2) + ); + + __asm__ volatile ( + "movl $0x206, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl %0,%%eax\n\t" + "orl $(0 | 6), %%eax\n\t" + "wrmsr\n\t" + + "movl $0x207, %%ecx\n\t" + "xorl %%edx, %%edx\n\t" + "movl $0x100000,%%eax\n\t" + "decl %%eax\n\t" + "notl %%eax\n\t" + "orl $(0 | 0x800), %%eax\n\t" + "wrmsr\n\t" + ::"g"(memtop1) + ); + + __asm__ volatile ( + "movl $0x208, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $0,%eax\n\t" + "orl $(0 | 6), %eax\n\t" + "wrmsr\n\t" + + "movl $0x209, %ecx\n\t" + "xorl %edx, %edx\n\t" + "movl $0x100000,%eax\n\t" + "decl %eax\n\t" + "notl %eax\n\t" + "orl $(0 | 0x800), %eax\n\t" + "wrmsr\n\t" + ); +#endif + + /* + * WAKE_MEM_INFO is inited in get_set_top_available_mem() + * in tables.c these two memcpy() not not be enabled if set + * the MTRR around this two lines. + */ +#if 0 + __asm__ volatile ( + "movl $0, %%esi\n\t" + "movl %0, %%edi\n\t" + "movl $0xa0000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"g"(memtop3) + ); + + __asm__ volatile ( + "movl $0xe0000, %%esi\n\t" + "movl %0, %%edi\n\t" + "movl $0x20000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"g"(memtop4) + ); +#endif + /* This can have function call, because no variable used before this. */ + print_debug("Copy memory to high memory to protect s3 wakeup vector code\n"); + memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - + 0x100000), (unsigned char *)0, 0xa0000); + memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - + 0x100000 + 0xe0000), (unsigned char *)0xe0000, 0x20000); + + /* Restore the MTRR previously modified. */ +#if 0 + __asm__ volatile ( + "wbinvd\n\t" + "xorl %edx, %edx\n\t" + "xorl %eax, %eax\n\t" + "movl $0x204, %ecx\n\t" + "wrmsr\n\t" + "movl $0x205, %ecx\n\t" + "wrmsr\n\t" + "movl $0x206, %ecx\n\t" + "wrmsr\n\t" + "movl $0x207, %ecx\n\t" + "wrmsr\n\t" + "movl $0x208, %ecx\n\t" + "wrmsr\n\t" + "movl $0x209, %ecx\n\t" + "wrmsr\n\t" + ); +#endif + } +#endif +} diff --git a/src/mainboard/via/epia_m700/wakeup.c b/src/mainboard/via/epia_m700/wakeup.c new file mode 100644 index 0000000..28b8911 --- /dev/null +++ b/src/mainboard/via/epia_m700/wakeup.c @@ -0,0 +1,451 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* FIXME This code should be dropped and instead the generic resume code + * should be used. + */ + +/* Parts of this code is taken from reboot.c from Linux. */ + +/* + * This file mostly copied from Rudolf's S3 patch, some changes in + * acpi_jump_wake(). + */ + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <console/console.h> +#include <delay.h> +#include "wakeup.h" + +int enable_a20(void); + +/* + * The following code and data reboots the machine by switching to real + * mode and jumping to the BIOS reset entry point, as if the CPU has + * really been reset. The previous version asked the keyboard + * controller to pulse the CPU reset line, which is more thorough, but + * doesn't work with at least one type of 486 motherboard. It is easy + * to stop this code working; hence the copious comments. + */ + +static unsigned long long real_mode_gdt_entries[3] = { + 0x0000000000000000ULL, /* Null descriptor */ + 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ +}; + +struct Xgt_desc_struct { + unsigned short size; + unsigned long address __attribute__ ((packed)); + unsigned short pad; +} __attribute__ ((packed)); + +static struct Xgt_desc_struct real_mode_gdt = { + sizeof(real_mode_gdt_entries) - 1, + (long)real_mode_gdt_entries +}, +real_mode_idt = {0x3ff, 0}, +no_idt = { 0, 0 }; + +/* + * This is 16-bit protected mode code to disable paging and the cache, + * switch to real mode and jump to the BIOS reset code. + * + * The instruction that switches to real mode by writing to CR0 must be + * followed immediately by a far jump instruction, which set CS to a + * valid value for real mode, and flushes the prefetch queue to avoid + * running instructions that have already been decoded in protected + * mode. + * + * Clears all the flags except ET, especially PG (paging), PE + * (protected-mode enable) and TS (task switch for coprocessor state + * save). Flushes the TLB after paging has been disabled. Sets CD and + * NW, to disable the cache on a 486, and invalidates the cache. This + * is more like the state of a 486 after reset. I don't know if + * something else should be done for other chips. + * + * More could be done here to set up the registers as if a CPU reset had + * occurred; hopefully real BIOSs don't assume much. + */ + +// 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000, %eax */ + +static unsigned char real_mode_switch[] = { + 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ + 0x24, 0xfe, /* andb $0xfe,al */ + 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ +}; + +static unsigned char jump_to_wakeup[] = { + 0xea, 0x00, 0x00, 0x00, 0xe0 /* ljmp $0xffff, $0x0000 */ +}; + +void acpi_jump_wake(u32 vector) +{ + u32 dwEip; + struct Xgt_desc_struct *wake_thunk16_Xgt_desc; + + printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO %x\n", vector); + if (enable_a20()) + die("failed to enable A20\n"); + printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO 3 %x\n", vector); + + *((u16 *) (jump_to_wakeup + 3)) = (u16) (vector >> 4); + printk(BIOS_DEBUG, "%x %x %x %x %x\n", jump_to_wakeup[0], jump_to_wakeup[1], + jump_to_wakeup[2], jump_to_wakeup[3], jump_to_wakeup[4]); + + memcpy((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100), + real_mode_switch, sizeof(real_mode_switch)); + memcpy((void *)(WAKE_THUNK16_ADDR - 100), jump_to_wakeup, + sizeof(jump_to_wakeup)); + + //jason_tsc_count(); + printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); + //jason_tsc_count_end(); + + unsigned long long *real_mode_gdt_entries_at_eseg; + real_mode_gdt_entries_at_eseg = (void *)WAKE_THUNK16_GDT; /* Copy from real_mode_gdt_entries and change limition to 1M and data base to 0; */ + real_mode_gdt_entries_at_eseg[0] = 0x0000000000000000ULL; /* Null descriptor */ + real_mode_gdt_entries_at_eseg[1] = 0x000f9a000000ffffULL; /* 16-bit real-mode 1M code at 0x00000000 */ + real_mode_gdt_entries_at_eseg[2] = 0x000f93000000ffffULL; /* 16-bit real-mode 1M data at 0x00000000 */ + + wake_thunk16_Xgt_desc = (void *)WAKE_THUNK16_XDTR; + wake_thunk16_Xgt_desc[0].size = sizeof(real_mode_gdt_entries) - 1; + wake_thunk16_Xgt_desc[0].address = (long)real_mode_gdt_entries_at_eseg; + wake_thunk16_Xgt_desc[1].size = 0x3ff; + wake_thunk16_Xgt_desc[1].address = 0; + wake_thunk16_Xgt_desc[2].size = 0; + wake_thunk16_Xgt_desc[2].address = 0; + + /* Added this code to get current value of EIP. */ + __asm__ volatile ( + "calll geip\n\t" + "geip: \n\t" + "popl %0\n\t" + : "=a" (dwEip) + ); + + unsigned char *dest, *src; + src = (unsigned char *)dwEip; + dest = (void *)WAKE_RECOVER1M_CODE; + u32 i; + for (i = 0; i < 0x200; i++) + dest[i] = src[i]; + + __asm__ __volatile__("ljmp $0x0010,%0" /* 08 error */ + ::"i"((void *)(WAKE_RECOVER1M_CODE + 0x20))); + + /* Added 0x20 "nop" to make sure the ljmp will not jump then halt. */ + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + asm volatile ("nop"); + + __asm__ volatile ( + /* + * Set new esp, maybe ebp should not equal to esp?, due to the + * variable in acpi_jump_wake?, anyway, this may be not a big + * problem. and I didn't clear the area (ef000+-0x200) to zero. + */ + "movl %0, %%ebp\n\t" + "movl %0, %%esp\n\t"::"a" (WAKE_THUNK16_STACK) + ); + + /* + * Only "src" and "dest" use the new stack, and the esp maybe also + * used in resumevector. + */ +#if PAYLOAD_IS_SEABIOS == 1 + /* WAKE_MEM_INFO inited in get_set_top_available_mem in tables.c. */ + src = + (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - 0x100000); + dest = 0; + + /* + * If recovered 0-e0000, then when resume, before WinXP turn on the + * desktop screen, there is gray background which last 1sec. + */ + for (i = 0; i < 0xa0000; i++) + dest[i] = src[i]; + +#if 0 + __asm__ volatile ( + "movl %0, %%esi\n\t" + "movl $0, %%edi\n\t" + "movl $0xa0000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"a"(src) + ); +#endif + src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 + - 0x100000 + 0xc0000); + +#if 0 + dest = 0xc0000; + for (i = 0; i < 0x20000; i++) + dest[i] = src[i]; + + __asm__ volatile ( + "movl %0, %%esi\n\t" + "movl $0xc0000, %%edi\n\t" + "movl $0x20000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t" + ::"a"(src) + ); +#endif + + src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 + - 0x100000 + 0xe0000 + WAKE_SPECIAL_SIZE); + + /* dest = 0xf0000; */ + /* for (i = 0; i < 0x10000; i++) */ + /* dest[i] = src[i]; */ + __asm__ volatile ( + "movl %0, %%esi\n\t" + "movl %1, %%edi\n\t" + "movl %2, %%ecx\n\t" + "shrl $2, %%ecx\n\t" + "rep movsd\n\t"::"r" (src), + "r"(0xe0000 + WAKE_SPECIAL_SIZE), + "r"(0x10000 - WAKE_SPECIAL_SIZE) + ); + + src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 + - 0x100000 + 0xf0000); + /* dest = 0xf0000; */ + /* for (i = 0; i < 0x10000; i++) */ + /* dest[i] = src[i]; */ + __asm__ volatile ( + "movl %0, %%esi\n\t" + "movl $0xf0000, %%edi\n\t" + "movl $0x10000, %%ecx\n\t" + "shrl $2, %%ecx\n\t" "rep movsd\n\t"::"a" (src) + ); + + asm volatile ("wbinvd"); +#endif + /* Set up the IDT for real mode. */ + asm volatile ("lidt %0"::"m" (wake_thunk16_Xgt_desc[1])); + + /* + * Set up a GDT from which we can load segment descriptors for real + * mode. The GDT is not used in real mode; it is just needed here to + * prepare the descriptors. + */ + asm volatile ("lgdt %0"::"m" (wake_thunk16_Xgt_desc[0])); + + /* + * Load the data segment registers, and thus the descriptors ready for + * real mode. The base address of each segment is 0x100, 16 times the + * selector value being loaded here. This is so that the segment + * registers don't have to be reloaded after switching to real mode: + * the values are consistent for real mode operation already. + */ + __asm__ __volatile__( + "movl $0x0010,%%eax\n" + "\tmovl %%eax,%%ds\n" + "\tmovl %%eax,%%es\n" + "\tmovl %%eax,%%fs\n" + "\tmovl %%eax,%%gs\n" + "\tmovl %%eax,%%ss":::"eax" + ); + + /* + * Jump to the 16-bit code that we copied earlier. It disables paging + * and the cache, switches to real mode, and jumps to the BIOS reset + * entry point. + */ + + __asm__ __volatile__( + "ljmp $0x0008,%0"::"i" + ((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100)) + ); +} + +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/x86/boot/a20.c + * + * Enable A20 gate (return -1 on failure) + */ + +#define MAX_8042_LOOPS 100000 + +static int empty_8042(void) +{ + u8 status; + int loops = MAX_8042_LOOPS; + + while (loops--) { + udelay(1); + + status = inb(0x64); + if (status & 1) { + /* Read and discard input data */ + udelay(1); + (void)inb(0x60); + } else if (!(status & 2)) { + /* Buffers empty, finished! */ + return 0; + } + } + + return -1; +} + +/* Returns nonzero if the A20 line is enabled. The memory address + used as a test is the int $0x80 vector, which should be safe. */ + +#define A20_TEST_ADDR (4*0x80) +#define A20_TEST_SHORT 32 +#define A20_TEST_LONG 2097152 /* 2^21 */ + +static int a20_test(int loops) +{ + int ok = 0; + int saved, ctr; + + saved = ctr = *((u32 *) A20_TEST_ADDR); + + while (loops--) { + + *((u32 *) A20_TEST_ADDR) = ++ctr; + + udelay(1); /* Serialize and make delay constant */ + + ok = *((u32 *) A20_TEST_ADDR + 0xffff0 + 0x10) ^ ctr; + if (ok) + break; + } + + *((u32 *) A20_TEST_ADDR) = saved; + return ok; +} + +/* Quick test to see if A20 is already enabled */ +static int a20_test_short(void) +{ + return a20_test(A20_TEST_SHORT); +} + +/* Longer test that actually waits for A20 to come on line; this + is useful when dealing with the KBC or other slow external circuitry. */ +static int a20_test_long(void) +{ + return a20_test(A20_TEST_LONG); +} + +static void enable_a20_kbc(void) +{ + empty_8042(); + + outb(0xd1, 0x64); /* Command write */ + empty_8042(); + + outb(0xdf, 0x60); /* A20 on */ + empty_8042(); +} + +static void enable_a20_fast(void) +{ + u8 port_a; + + port_a = inb(0x92); /* Configuration port A */ + port_a |= 0x02; /* Enable A20 */ + port_a &= ~0x01; /* Do not reset machine */ + outb(port_a, 0x92); +} + +/* + * Actual routine to enable A20; return 0 on ok, -1 on failure + */ + +#define A20_ENABLE_LOOPS 255 /* Number of times to try */ + +int enable_a20(void) +{ + int loops = A20_ENABLE_LOOPS; + + while (loops--) { + /* First, check to see if A20 is already enabled + (legacy free, etc.) */ + if (a20_test_short()) + return 0; + + /* Try enabling A20 through the keyboard controller */ + empty_8042(); + + // if (a20_test_short()) + // return 0; /* BIOS worked, but with delayed reaction */ + + enable_a20_kbc(); + if (a20_test_long()) + return 0; + + /* Finally, try enabling the "fast A20 gate" */ + enable_a20_fast(); + if (a20_test_long()) + return 0; + } + + return -1; +} diff --git a/src/mainboard/via/epia_m700/wakeup.h b/src/mainboard/via/epia_m700/wakeup.h new file mode 100644 index 0000000..93d5a7f --- /dev/null +++ b/src/mainboard/via/epia_m700/wakeup.h @@ -0,0 +1,33 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 One Laptop per Child, Association, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef WAKEUP_H +#define WAKEUP_H + +#define WAKE_SPECIAL_AREA 0xE0000 +#define WAKE_SPECIAL_SIZE 0x1000 +#define WAKE_THUNK16_ADDR (WAKE_SPECIAL_AREA + 0x200) +#define WAKE_THUNK16_GDT (WAKE_SPECIAL_AREA + 0x300) +#define WAKE_THUNK16_XDTR (WAKE_SPECIAL_AREA + 0x350) +#define WAKE_MEM_INFO (WAKE_SPECIAL_AREA + 0x400) +#define WAKE_RECOVER1M_CODE (WAKE_SPECIAL_AREA + 0x500) +#define WAKE_THUNK16_STACK (WAKE_SPECIAL_AREA + 0xf00) + +#endif diff --git a/src/mainboard/via/epia_m850/Kconfig b/src/mainboard/via/epia_m850/Kconfig new file mode 100644 index 0000000..3f1bd34 --- /dev/null +++ b/src/mainboard/via/epia_m850/Kconfig @@ -0,0 +1,48 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011-2012 Alexandru Gagniuc mr.nuke.me@gmail.com +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see http://www.gnu.org/licenses/. +## + +if BOARD_VIA_EPIA_M850 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_NANO + select NORTHBRIDGE_VIA_VX900 + select SUPERIO_FINTEK_F81865F + select HAVE_PIRQ_TABLE + select PIRQ_ROUTE + select HAVE_MP_TABLE + #select HAVE_OPTION_TABLE + #select HAVE_ACPI_TABLES + #select HAVE_ACPI_RESUME + #select BOARD_HAS_FADT + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default via/epia_m850 + +config MAINBOARD_PART_NUMBER + string + default "EPIA-M850" + +config IRQ_SLOT_COUNT + int + default 13 + +endif # BOARD_VIA_EPIA_M850 diff --git a/src/mainboard/via/epia_m850/board_info.txt b/src/mainboard/via/epia_m850/board_info.txt new file mode 100644 index 0000000..1e673ab --- /dev/null +++ b/src/mainboard/via/epia_m850/board_info.txt @@ -0,0 +1,6 @@ +Category: mini +Board URL: http://www.viaembedded.com/en/products/boards/1290/1/EPIA-M850.html +ROM package: SOIC8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/via/epia_m850/devicetree.cb b/src/mainboard/via/epia_m850/devicetree.cb new file mode 100644 index 0000000..0c21cc8 --- /dev/null +++ b/src/mainboard/via/epia_m850/devicetree.cb @@ -0,0 +1,111 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2011-2013 Alexandru Gagniuc mr.nuke.me@gmail.com +## +## This program is free software: you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation, either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see http://www.gnu.org/licenses/. +## + +chip northbridge/via/vx900 # Northbridge + register "assign_pex_to_dp" = "0" + register "pcie_port1_2_lane_wide" = "1" + register "ext_int_route_to_pirq" = "'H'" + + device cpu_cluster 0 on # APIC cluster + chip cpu/via/nano # VIA NANO + device lapic 0 on end # APIC + end + end + device domain 0 on + device pci 0.0 on end # [0410] Host controller + device pci 0.1 on end # [1410] Error Reporting + device pci 0.2 on end # [2410] CPU Bus Control + device pci 0.3 on end # [3410] DRAM Bus Control + device pci 0.4 on end # [4410] Power Management + device pci 0.5 on # [5410] APIC+Traffic Control + chip drivers/generic/ioapic + register "have_isa_interrupts" = "0" + register "irq_on_fsb" = "1" + register "enable_virtual_wire" = "1" + register "base" = "0xfecc0000" + device ioapic 2 on end + end + end + device pci 0.6 off end # [6410] Scratch Registers + device pci 0.7 on end # [7410] V4 Link Control + device pci 1.0 on # [7122] VGA Chrome9 HD + ioapic_irq 2 INTA 0x28 + end + device pci 1.1 on # [9170] Audio Device + ioapic_irq 2 INTA 0x29 + end + device pci 3.0 on end # [a410] PEX1 + device pci 3.1 on end # [b410] PEX2 + device pci 3.2 on end # [c410] PEX3 + device pci 3.3 on end # [d410] PEX4 + device pci 3.4 on end # [e410] PCIE bridge + device pci b.0 on end # [a409] USB Device + device pci c.0 off end # [95d0] SDIO Host Controller + device pci d.0 off end # [9530] Memory Card controller + device pci f.0 on # [9001] SATA Controller + ioapic_irq 1 INTA 0x15 + end + device pci 10.0 on end # [3038] USB 1.1 + device pci 10.1 on end # [3038] USB 1.1 + device pci 10.2 on end # [3038] USB 1.1 + device pci 10.3 on end # [3038] USB 1.1 + device pci 10.4 on end # [3104] USB 2.0 + device pci 11.0 on # [8410] LPC Bus Control + chip drivers/generic/ioapic + register "have_isa_interrupts" = "1" + register "irq_on_fsb" = "1" + register "enable_virtual_wire" = "1" + register "base" = "0xfec00000" + device ioapic 1 on end + end + #chip drivers/generic/generic # DIMM 0 channel 1 + # device i2c 50 on end + #end + #chip drivers/generic/generic # DIMM 1 channel 1 + # device i2c 51 on end + #end + chip superio/fintek/f81865f # Super duper IO + device pnp 4e.0 off end # Floppy + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 off end # Hardware Monitor + device pnp 4e.5 off end # Keyboard not here + device pnp 4e.6 off end # GPIO + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.12 on # COM3 + io 0x60 = 0x3e8 + irq 0x70 = 10 + end + device pnp 4e.13 on # COM4 + io 0x60 = 0x2e8 + irq 0x70 = 11 + end + end # superio/fintek/f81865f + end # LPC + device pci 11.7 on end # [a353] North-South control + device pci 14.0 on end # [3288] Azalia HDAC + end +end diff --git a/src/mainboard/via/epia_m850/irq_tables.c b/src/mainboard/via/epia_m850/irq_tables.c new file mode 100644 index 0000000..28fbb4f --- /dev/null +++ b/src/mainboard/via/epia_m850/irq_tables.c @@ -0,0 +1,75 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <device/pci_ids.h> +#include <string.h> /* <- For memset */ + +#define _OFF 0x00 +#define ___OFF 0x0000 +#define LNKA 1 +#define LNKB 2 +#define LNKC 3 +#define LNKD 4 +#define LNKE 5 +#define LNKF 6 +#define LNKG 7 +#define LNKH 8 +#define BITMAP 0xdce0 +/* The link that carries the SATA interrupt has its own mask, just in case + * we want to make sure our SATA controller gets mapped to IRQ 14 */ +#define B_SATA BITMAP + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * 13, /* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x11 << 3) | 0x0, /* Interrupt router dev */ + 0, /* IRQs devoted exclusively for PCI */ + PCI_VENDOR_ID_VIA, /* Vendor */ + PCI_DEVICE_ID_VIA_VX900_LPC, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x19, /* Checksum (has to be set to some value that + * would give 0 after the sum of all bytes + * for this structure (including checksum). */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x00, (0x03 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, + {0x00, (0x0a << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0}, + {0x00, (0x0b << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x00, (0x0c << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x00, (0x0d << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x00, (0x0f << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x00, (0x10 << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0}, + {0x00, (0x14 << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0}, + {0x01, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x1, 0x0}, + {0x02, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x2, 0x0}, + {0x03, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, + {0x04, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} diff --git a/src/mainboard/via/epia_m850/mainboard.c b/src/mainboard/via/epia_m850/mainboard.c new file mode 100644 index 0000000..dbe682c --- /dev/null +++ b/src/mainboard/via/epia_m850/mainboard.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <console/console.h> + +#if CONFIG_VGA_ROM_RUN + +#include <arch/interrupt.h> +#include <x86emu/x86emu.h> + +#include <northbridge/via/vx900/vx900.h> + +static int vx900_int15_handler(void) +{ + int res; + + printk(BIOS_DEBUG, "%s %0x\n", __func__, X86_AX & 0xffff); + /* Set AX return value here so we don't set it every time. Just set it + * to something else if the callback is unsupported */ + res = -1; + switch (X86_AX & 0xffff) { +#if 0 + case 0x5f01: + /* VGA POST - panel type */ + /* FIXME: Don't hardcode panel type */ + /* Panel Type Number */ + X86_CX = 0; + res = 0; + break; + case 0x5f02: + { + /* Boot device selection */ + X86_BL = INT15_5F02_BL_HWOPT_CRTCONN; + /* FIXME: or 0 ? */ + X86_BH = 0; // INT15_5F02_BH_TV_CONN_DEFAULT; + X86_EBX = 0; // INT15_5F02_EBX_HDTV_RGB; + X86_ECX = INT15_5F02_ECX_DISPLAY_CRT; + //X86_ECX |= INT15_5F02_ECX_TV_MODE_RGB; + //X86_ECX |= INT15_5F02_ECX_HDTV_1080P; + X86_DL = INT15_5F02_DL_TV_LAYOUT_DEFAULT; + res = 0; + break; + } +#endif + case 0x5f18: + X86_BL = vx900_int15_get_5f18_bl(); + res = 0; + break; +#if 0 + case 0x5f2a: + /* Get SSC Control Settings */ + /* FIXME: No idea what this does. Just disable this feature + * for now */ + X86_CX = INT15_5F2A_CX_SSC_ENABLE; + res = 0; + break; + case 0x5f2b: + /* Engine clock setting */ + /* FIXME: ECLK fixed 250MHz ? */ + X86_EBX = INT15_5F2B_EBX_ECLK_250MHZ; + break; +#endif + default: + printk(BIOS_DEBUG, "Unsupported INT15 call %04x!\n", + X86_AX & 0xffff); + X86_AX = 0; + res = -1; + break; + } + + if (res == 0) + X86_AX = 0x5f; + else + X86_AX = 0; + return X86_AX; +} +#endif + +static void mainboard_enable(device_t dev) +{ + (void)dev; + +#if CONFIG_VGA_ROM_RUN + print_debug("Installing INT15 handler...\n"); + mainboard_interrupt_handlers(0x15, &vx900_int15_handler); +#endif +} + +struct chip_operations mainboard_ops = { + CHIP_NAME("VIA EPIA-M850 Mainboard") + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/via/epia_m850/romstage.c b/src/mainboard/via/epia_m850/romstage.c new file mode 100644 index 0000000..7b62d86 --- /dev/null +++ b/src/mainboard/via/epia_m850/romstage.c @@ -0,0 +1,105 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011-2012 Alexandru Gagniuc mr.nuke.me@gmail.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + */ + +/* + * Inspired from the EPIA-M700 + */ +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/io.h> +#include <arch/hlt.h> +#include <console/console.h> +#include <lib.h> +#include <cpu/x86/bist.h> +#include <string.h> +#include <timestamp.h> +#include <console/cbmem_console.h> + +#include "northbridge/via/vx900/early_vx900.h" +#include "northbridge/via/vx900/raminit.h" +#include <superio/fintek/common/fintek.h> +#include <superio/fintek/f81865f/f81865f.h> + +#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1) + +/* cache_as_ram.inc jumps to here. */ +#include <cpu/intel/romstage.h> +void main(unsigned long bist) +{ + u32 tolm; + + timestamp_init(rdtsc()); + timestamp_add_now(TS_START_ROMSTAGE); + + /* First thing we need to do on the VX900, before anything else */ + vx900_enable_pci_config_space(); + + /* Serial console is easy to take care of */ + fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + print_debug("Console initialized.\n"); + + vx900_cpu_bus_interface_setup(); + + /* Be smart. Get this info */ + vx900_print_strapping_info(); + /* DEVEL helper */ + vx900_disable_auto_reboot(); + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + /* Oh, almighty, give us the SMBUS */ + enable_smbus(); + + timestamp_add_now(TS_BEFORE_INITRAM); + /* Now we can worry about raminit. + * This board only has DDR3, so no need to worry about which DRAM type + * to use */ + dimm_layout dimms = { {0x50, 0x51, SPD_END_LIST} }; + vx900_init_dram_ddr3(&dimms); + timestamp_add_now(TS_AFTER_INITRAM); + + /* TODO: All these ram_checks are here to ensure we test most of the RAM + * below 4G. They should not be needed once VX900 raminit is stable */ + ram_check(0, 0x80); + ram_check(512 << 10, 0x80); + ram_check((1 << 20) - (1 << 10), 0x80); + ram_check((1 << 24), 0x80); + ram_check((512 + 256 - 1) << 20, 0x80); + ram_check(0x80c0000, 0x80); + tolm = ((pci_read_config16(MCU, 0x84) & 0xfff0) >> 4) << 20; + if (tolm > (1 * (u32) GiB)) + ram_check(1024 << 10, 0x80); + if (tolm > (2 * (u32) GiB)) + ram_check(2048 << 20, 0x80); + + print_debug("We passed RAM verify\n"); + + /* We got RAM working, now we can write the timestamps to RAM */ +#if CONFIG_EARLY_CBMEM_INIT + cbmem_recovery(0); +#endif + timestamp_add_now(TS_END_ROMSTAGE); + /* FIXME: See if this is needed or take this out please */ + /* Disable Memcard and SDIO */ + pci_mod_config8(LPC, 0x51, 0, (1 << 7) | (1 << 4)); +} diff --git a/src/mainboard/via/epia_mii/Kconfig b/src/mainboard/via/epia_mii/Kconfig new file mode 100644 index 0000000..ff31b93 --- /dev/null +++ b/src/mainboard/via/epia_mii/Kconfig @@ -0,0 +1,9 @@ +if BOARD_VIA_EPIA_MII + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "EPIA-MII" + +endif diff --git a/src/mainboard/via/epia_mii/board_info.txt b/src/mainboard/via/epia_mii/board_info.txt new file mode 100644 index 0000000..7efeeb2 --- /dev/null +++ b/src/mainboard/via/epia_mii/board_info.txt @@ -0,0 +1,4 @@ +Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... +Flashrom support: y +Category: mini +Clone of: via/epia_m diff --git a/src/mainboard/via/epia_ml/Kconfig b/src/mainboard/via/epia_ml/Kconfig new file mode 100644 index 0000000..5e7b6ab --- /dev/null +++ b/src/mainboard/via/epia_ml/Kconfig @@ -0,0 +1,9 @@ +if BOARD_VIA_EPIA_ML + +# Dummy for abuild + +config MAINBOARD_PART_NUMBER + string + default "EPIA-ML" + +endif diff --git a/src/mainboard/via/epia_ml/board_info.txt b/src/mainboard/via/epia_ml/board_info.txt new file mode 100644 index 0000000..8e569dc --- /dev/null +++ b/src/mainboard/via/epia_ml/board_info.txt @@ -0,0 +1,4 @@ +Board URL: http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id... +Flashrom support: y +Category: mini +Clone of: via/epia_m diff --git a/src/mainboard/via/epia_n/Kconfig b/src/mainboard/via/epia_n/Kconfig new file mode 100644 index 0000000..97a0553 --- /dev/null +++ b/src/mainboard/via/epia_n/Kconfig @@ -0,0 +1,29 @@ +if BOARD_VIA_EPIA_N + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select CPU_VIA_C3 + select NORTHBRIDGE_VIA_CN400 + select SOUTHBRIDGE_VIA_VT8237R + select SUPERIO_WINBOND_W83697HF + select HAVE_OPTION_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE + select EPIA_VT8237R_INIT + select HAVE_ACPI_TABLES + select BOARD_ROMSIZE_KB_512 + select ROMCC + +config MAINBOARD_DIR + string + default via/epia_n + +config MAINBOARD_PART_NUMBER + string + default "EPIA-N" + +config IRQ_SLOT_COUNT + int + default 7 + +endif # BOARD_VIA_EPIA_N diff --git a/src/mainboard/via/epia_n/acpi/irq_links.asl b/src/mainboard/via/epia_n/acpi/irq_links.asl new file mode 100644 index 0000000..29b2a1b --- /dev/null +++ b/src/mainboard/via/epia_n/acpi/irq_links.asl @@ -0,0 +1,571 @@ +/* + * Minimalist ACPI DSDT table for EPIA-N / NL + * Basic description of PCI Interrupt Assignments. + * This is expected to be included into _SB.PCI0 namespace + * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk + * + */ + + /* PCI PnP Routing Links */ + + /* Define how interrupt Link A is plumbed in */ + Device (LNKA) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x01) + /* Status - always return ready */ + Method (_STA, 0, NotSerialized) + { + /* See if coreboot has allocated INTA# */ + And (PIRA, 0xF0, Local0) + If (LEqual (Local0, 0x00)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, ) + {3,4,6,7,10,11,12} + }) + Return (BUFA) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFA, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, _Y07) + {} + }) + /* Read the Binary Encoded Field and Map this */ + /* onto the bitwise _INT field in the IRQ descriptor */ + /* See ACPI Spec for detail of _IRQ Descriptor */ + CreateByteField (BUFA, _SB.PCI0.LNKA._CRS._Y07._INT, IRA1) + CreateByteField (BUFA, 0x02, IRA2) + Store (0x00, Local3) + Store (0x00, Local4) + And (PIRA, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNotEqual (Local1, 0x00)) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRA1) + Store (Local4, IRA2) + } + Return (BUFA) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - Set PnP Routing Reg to 0 */ + Method (_DIS, 0, NotSerialized ) + { + And (PIRA, 0x0F, PIRA) + } + } // End of LNKA + + Device (LNKB) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x02) + Method (_STA, 0, NotSerialized) + { + /* See if coreboot has allocated INTB# */ + And (PIBC, 0x0F, Local0) + If (LEqual (Local0, 0x00)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, ) + {3,4,6,7,10,11,12} + }) + Return (BUFB) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFB, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, _Y08) + {} + }) + /* Read the Binary Encoded Field and Map this */ + /* onto the bitwise _INT field in the IRQ descriptor */ + /* See ACPI Spec for detail of _IRQ Descriptor */ + CreateByteField (BUFB, _SB.PCI0.LNKB._CRS._Y08._INT, IRB1) + CreateByteField (BUFB, 0x02, IRB2) + Store (0x00, Local3) + Store (0x00, Local4) + And (PIBC, 0x0F, Local1) + If (LNotEqual (Local1, 0x00)) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRB1) + Store (Local4, IRB2) + } + Return (BUFB) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - Set PnP Routing Reg to 0 */ + Method (_DIS, 0, NotSerialized ) + { + And (PIBC, 0xF0, PIBC) + } + + } // End of LNKB + + Device (LNKC) + { + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x03) + Method (_STA, 0, NotSerialized) + { + /* See if coreboot has allocated INTC# */ + And (PIBC, 0xF0, Local0) + If (LEqual (Local0, 0x00)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFC, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, ) + {3,4,6,7,10,11,12} + }) + Return (BUFC) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFC, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, _Y09) + {} + }) + /* Read the Binary Encoded Field and Map this */ + /* onto the bitwise _INT field in the IRQ descriptor */ + /* See ACPI Spec for detail of _IRQ Descriptor */ + CreateByteField (BUFC, _SB.PCI0.LNKC._CRS._Y09._INT, IRC1) + CreateByteField (BUFC, 0x02, IRC2) + Store (0x00, Local3) + Store (0x00, Local4) + And (PIBC, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNotEqual (Local1, 0x00)) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRC1) + Store (Local4, IRC2) + } + Return (BUFC) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - Set PnP Routing Reg to 0 */ + Method (_DIS, 0, NotSerialized ) + { + And (PIBC, 0x0F, PIBC) + } + +} // End of LNKC + +Device (LNKD) +{ + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x04) + Method (_STA, 0, NotSerialized) + { + /* See if coreboot has allocated INTD# */ + And (PIRD, 0xF0, Local0) + If (LEqual (Local0, 0x00)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (BUFD, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, ) + {3,4,6,7,10,11,12} + }) + Return (BUFD) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUFD, ResourceTemplate () + { + IRQ (Level, ActiveLow, Shared, _Y0A) + {} + }) + /* Read the Binary Encoded Field and Map this */ + /* onto the bitwise _INT field in the IRQ descriptor */ + /* See ACPI Spec for detail of _IRQ Descriptor */ + CreateByteField (BUFD, _SB.PCI0.LNKD._CRS._Y0A._INT, IRD1) + CreateByteField (BUFD, 0x02, IRD2) + Store (0x00, Local3) + Store (0x00, Local4) + And (PIRD, 0xF0, Local1) + ShiftRight (Local1, 0x04, Local1) + If (LNotEqual (Local1, 0x00)) + { + If (LGreater (Local1, 0x07)) + { + Subtract (Local1, 0x08, Local2) + ShiftLeft (One, Local2, Local4) + } + Else + { + If (LGreater (Local1, 0x00)) + { + ShiftLeft (One, Local1, Local3) + } + } + + Store (Local3, IRD1) + Store (Local4, IRD2) + } + Return (BUFD) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - Set PnP Routing Reg to 0 */ + Method (_DIS, 0, NotSerialized ) + { + And (PIRD, 0x0F, PIRD) + } + +} // End of LNKD + + +/* APIC IRQ Links */ + +Device (ATAI) +{ + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x05) + Method (_STA, 0, NotSerialized) + { + /* ATFL == 0x02 if SATA Enabled */ + If (LNotEqual (ATFL, 0x02)) + { + /* Double Check By Reading SATA VID */ + /* Otherwise Compatibility Mode */ + If (LNotEqual (_SB.PCI0.SATA.VID, 0x1106)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + Else + { + /* Serial ATA Enabled Check if PATA is in */ + /* Compatibility Mode */ + If (LEqual (_SB.PCI0.PATA.ENAT, 0x0A)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (ATAN, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) + { + 0x00000014, + } + }) + Return (ATAN) + } + + Method (_CRS, 0, NotSerialized) + { + Name (ATAB, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y10) + { + 0x00000000, + } + }) + CreateByteField (ATAB, _SB.PCI0.ATAI._CRS._Y10._INT, IRAI) + Store (0x14, IRAI) + Return (ATAB) + + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + +} // End of ATA Interface Link + + +Device (USBI) +{ + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x0A) + Method (_STA, 0, NotSerialized) + { + /* Check that at least one of the USB */ + /* functions is enabled */ + And (IDEB, 0x37, Local0) + If (LEqual (Local0, 0x37)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (USBB, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) + { + 0x00000015, + } + }) + + Return(USBB) + } + + Method (_CRS, 0, NotSerialized) + { + Name (USBB, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y12) + { + 0x00000000, + } + }) + CreateByteField (USBB, _SB.PCI0.USBI._CRS._Y12._INT, IRBI) + Store (0x15, IRBI) + Return (USBB) + } + + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} +} + +Device (VT8I) +{ + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x0B) + Method (_STA, 0, NotSerialized) + { + /* Check Whether Sound and/or Modem are Activated */ + If (LEqual (EAMC, 0x03)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (A97C, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) + { + 0x00000016, + } + }) + Return (A97C) + } + + Method (_CRS, 0, NotSerialized) + { + Name (A97B, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y14) + { + 0x00000000, + } + }) + CreateByteField (A97B, _SB.PCI0.VT8I._CRS._Y14._INT, IRCI) + Store (0x16, IRCI) + Return (A97B) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + +} + + +Device (NICI) +{ + Name (_HID, EisaId ("PNP0C0F")) + Name (_UID, 0x0C) + Method (_STA, 0, NotSerialized) + { + /* Check if LAN Function is Enabled */ + /* Note that LAN Enable Polarity is different */ + /* from other functions in VT8237R !? */ + If (LEqual (ELAN, 0x00)) + { + Return (0x09) + } + Else + { + Return (0x0B) + } + } + + Method (_PRS, 0, NotSerialized) + { + Name (NICB, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) + { + 0x00000017, + } + }) + Return (NICB) + } + + Method (_CRS, 0, NotSerialized) + { + Name (NICD, ResourceTemplate () + { + Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, _Y16) + { + 0x00000000, + } + }) + CreateByteField (NICD, _SB.PCI0.NICI._CRS._Y16._INT, IRDI) + Store (0x17, IRDI) + Return (NICD) + } + + /* Set Resources - dummy function to keep Linux ACPI happy + * Linux is more than happy not to tinker with irq + * assignments as long as the CRS and STA functions + * return good values + */ + Method (_SRS, 1, NotSerialized) {} + /* Disable - dummy function to keep Linux ACPI happy */ + Method (_DIS, 0, NotSerialized ) {} + + +} diff --git a/src/mainboard/via/epia_n/acpi/pata_methods.asl b/src/mainboard/via/epia_n/acpi/pata_methods.asl new file mode 100644 index 0000000..1f3e137 --- /dev/null +++ b/src/mainboard/via/epia_n/acpi/pata_methods.asl @@ -0,0 +1,132 @@ +/* + * Minimalist ACPI DSDT table for EPIA-N / NL + * Basic description of some hardware resources to allow + * interrupt assignments to be done. This is expected to be included + * into the PATA Device definition in ab_physical.asl + * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk + * + */ + +Name (TIM0, Package (0x07) +{ + Package (0x05) + { + 0x78, 0xB4, 0xF0, 0x017F, 0x0258 + }, + + Package (0x05) + { + 0x20, 0x22, 0x33, 0x47, 0x5D + }, + + Package (0x05) + { + 0x04, 0x03, 0x02, 0x01, 0x00 + }, + + Package (0x04) + { + 0x02, 0x01, 0x00, 0x00 + }, + + Package (0x07) + { + 0x78, 0x50, 0x3C, 0x2D, 0x1E, 0x14, 0x0F + }, + + Package (0x0F) + { + 0x06, 0x05, 0x04, 0x04, 0x03, 0x03, 0x02, 0x02, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,0x00 + }, + + Package (0x07) + { + 0x0E, 0x08, 0x06, 0x04, 0x02, 0x01, 0x00 + } +}) + + +/* This method sets up the PATA Timing Control. + * Note that a lot of this is done in the + * coreboot VT8237R init code, but this is + * already getting very cluttered with board + * specific code. Using ACPI will allow this + * to be de-cluttered a bit (so long as we're + * running a ACPI capable OS!) + */ + +Method (PMEX, 0, Serialized) +{ + If (REGF) + { + /* Check if these regs are still at defaults */ + /* Board specific timing improvement if not */ + /* Already changed */ + If (LEqual (PMPT, 0xA8)) + { + Store (0x5D, PMPT) + } + + If (LEqual (PSPT, 0xA8)) + { + Store (0x5D, PSPT) + } + + If (LEqual (SMPT, 0xA8)) + { + Store (0x5D, SMPT) + } + + If (LEqual (SSPT, 0xA8)) + { + Store (0x5D, SSPT) + } + + } +} + +/* This Method Provides the method that is used to */ +/* Reset ATA Drives to POST reset condition */ +Method (GTF, 4, Serialized) +{ + Store (Buffer (0x07) + { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF + }, Local1) + Store (Buffer (0x07) + { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xA0, 0xEF + }, Local2) + CreateByteField (Local1, 0x01, MODE) + CreateByteField (Local2, 0x01, UMOD) + CreateByteField (Local1, 0x05, PCHA) + CreateByteField (Local2, 0x05, UCHA) + And (Arg0, 0x03, Local3) + If (LEqual (And (Local3, 0x01), 0x01)) + { + Store (0xB0, PCHA) + Store (0xB0, UCHA) + } + + If (Arg1) + { + Store (DerefOf (Index (DerefOf (Index (TIM0, 0x05)), Arg2)), + UMOD) + Or (UMOD, 0x40, UMOD) + } + Else + { + Store (Match (DerefOf (Index (TIM0, 0x01)), MEQ, Arg3, MTR, + 0x00, 0x00), Local0) + Or (0x20, DerefOf (Index (DerefOf (Index (TIM0, 0x03)), Local0 + )), UMOD) + } + + Store (Match (DerefOf (Index (TIM0, 0x01)), MEQ, Arg3, MTR, + 0x00, 0x00), Local0) + Or (0x08, DerefOf (Index (DerefOf (Index (TIM0, 0x02)), Local0 + )), MODE) + Concatenate (Local1, Local2, Local6) + Return (Local6) +} diff --git a/src/mainboard/via/epia_n/acpi/pci_init.asl b/src/mainboard/via/epia_n/acpi/pci_init.asl new file mode 100644 index 0000000..3169a03 --- /dev/null +++ b/src/mainboard/via/epia_n/acpi/pci_init.asl @@ -0,0 +1,30 @@ +/* + * Minimalist ACPI DSDT table for EPIA-N / NL + * Basic description of PCI Interrupt Assignments. + * This is expected to be included into _SB.PCI0 namespace + * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk + * + */ + +/* This file provides a PCI Bus Initialisation Method that sets + * some flags for use in the interrupt link assignment + */ + +Method (_SB.PCI0._INI, 0, NotSerialized) +{ + + /* Checking for ATA Interface Enabled */ + Store (0x00, ATFL) + If (LEqual (EIDE, 0x01)) + { + Store (0x02, ATFL) + } + Else + { + If (LNotEqual (_SB.PCI0.PATA.VID, 0x1106)) + { + Store (0x01, ATFL) + } + } + +} diff --git a/src/mainboard/via/epia_n/acpi/sb_physical.asl b/src/mainboard/via/epia_n/acpi/sb_physical.asl new file mode 100644 index 0000000..7dd7b1d --- /dev/null +++ b/src/mainboard/via/epia_n/acpi/sb_physical.asl @@ -0,0 +1,548 @@ +/* + * Minimalist ACPI DSDT table for EPIA-N / NL + * Basic description of some hardware resources to allow + * interrupt assignments to be done. This is expected to be included + * into _SB.PCI0 namespace + * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk + * + */ + + +/* Basic description of the VT8237R LPC Interface + * PCI Configuration Space + */ + +Device (VT8R) +{ + Name (_ADR, 0x00110000) + OperationRegion (USBC, PCI_Config, 0x50, 0x02) + Scope () + { + Field (_SB.PCI0.VT8R.USBC, ByteAcc, NoLock, Preserve) + { + IDEB, 8 + } + } + + OperationRegion (VTSB, PCI_Config, 0x00, 0xE8) + Scope () + { + Field (_SB.PCI0.VT8R.VTSB, ByteAcc, NoLock, Preserve) + { + Offset (0x02), + DEID, 16, + Offset (0x2C), + ID2C, 8, + ID2D, 8, + ID2E, 8, + ID2F, 8, + Offset (0x44), + PIRE, 4, + PIRF, 4, + PIRG, 4, + PIRH, 4, + POLE, 1, + POLF, 1, + POLG, 1, + POLH, 1, + ENR8, 1, + Offset (0x50), + ESB4, 1, + ESB3, 1, + ESB2, 1, + EIDE, 1, + EUSB, 1, + ESB1, 1, + EAMC, 2, + EKBC, 1, + KBCC, 1, + EPS2, 1, + ERTC, 1, + ELAN, 1, + , 2, + USBD, 1, + SIRQ, 8, + Offset (0x55), + PIRA, 8, + PIBC, 8, + PIRD, 8, + Offset (0x75), + BSAT, 1, + Offset (0x94), + PWC1, 2, + GPO1, 1, + GPO2, 1, + GPO3, 1, + PLLD, 1 + } + } +} + +/* Basic Description of Serial ATA Interface */ +Device (SATA) +{ + Name (_ADR, 0x000F0000) + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.SATA.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.SATA.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } + + OperationRegion (SAPR, PCI_Config, 0x00, 0xC2) + Field (SAPR, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + IDEI, 8, + Offset (0x49), + , 6, + EPHY, 1 + } +} + +/* Basic Description of Parallel ATA Interface */ +/* An some initialisation of the interface */ +Device (PATA) +{ + Name (_ADR, 0x000F0001) + Name (REGF, 0x01) + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.PATA.VID, 0x1106)) + { + Return (0x00) + } + Else + { + PMEX () + /* Check if the Interface is Enabled */ + If (LEqual (_SB.PCI0.PATA.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } + + /* ACPI Spec says to check that regions are accessible */ + /* before trying to access them */ + Method (_REG, 2, NotSerialized) + { + /* Arg0 = Operating Region (0x02 == PCI_Config) */ + If (LEqual (Arg0, 0x02)) + { + /* Arg1 = Handler Connection Mode (0x01 == Connect) */ + Store (Arg1, REGF) + } + } + + #include "pata_methods.asl" + + + OperationRegion (PAPR, PCI_Config, 0x00, 0xC2) + Field (PAPR, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x09), + ENAT, 4, + Offset (0x3C), + IDEI, 8, + Offset (0x40), + ESCH, 1, + EPCH, 1, + Offset (0x48), + SSPT, 8, + SMPT, 8, + PSPT, 8, + PMPT, 8, + Offset (0x50), + SSUT, 4, + SSCT, 1, + SSUE, 3, + SMUT, 4, + SMCT, 1, + SMUE, 3, + PSUT, 4, + PSCT, 1, + PSUE, 3, + PMUT, 4, + PMCT, 1, + PMUE, 3 + } + + + Device (CHN0) + { + Name (_ADR, 0x00) + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.PATA.EPCH, 0x01)) + { + Return (0x00) + } + Else + { + Return (0x0F) + } + } + + Device (DRV0) + { + Name (_ADR, 0x00) + Method (_GTF, 0, NotSerialized) + { + Return (GTF (0x00, PMUE, PMUT, PMPT)) + } + } + + Device (DRV1) + { + Name (_ADR, 0x01) + Method (_GTF, 0, NotSerialized) + { + Return (GTF (0x01, PSUE, PSUT, PSPT)) + } + } + } + + Device (CHN1) + { + Name (_ADR, 0x01) + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (ATFL, 0x02)) + { + If (LEqual (_SB.PCI0.SATA.EPHY, 0x01)) + { + Return (0x00) + } + Else + { + If (LNotEqual (_SB.PCI0.PATA.ESCH, 0x01)) + { + Return (0x00) + } + Else + { + Return (0x0F) + } + } + } + Else + { + If (LEqual (ATFL, 0x02)) + { + If (LNotEqual (_SB.PCI0.PATA.ESCH, 0x01)) + { + Return (0x00) + } + Else + { + Return (0x0F) + } + } + Else + { + Return(0x00) + } + } + } + + Device (DRV0) + { + Name (_ADR, 0x00) + Method (_GTF, 0, NotSerialized) + { + Return (GTF (0x02, SMUE, SMUT, SMPT)) + } + } + + Device (DRV1) + { + Name (_ADR, 0x01) + Method (_GTF, 0, NotSerialized) + { + Return (GTF (0x03, SSUE, SSUT, SSPT)) + } + } + } +} // End of PATA Device + + +/* Implement Basic USB Presence detect and */ +/* Power Management Event mask */ +Device (USB0) +{ + Name (_ADR, 0x00100000) + Name (_PRW, Package (0x02) + { + 0x0E, + 0x03 + }) + + OperationRegion (U2F0, PCI_Config, 0x00, 0xC2) + Field (U2F0, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + U0IR, 4, + Offset (0x84), + ECDX, 2 + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.USB0.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.USB0.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +Device (USB1) +{ + Name (_ADR, 0x00100001) + Name (_PRW, Package (0x02) + { + 0x0E, + 0x03 + }) + + OperationRegion (U2F1, PCI_Config, 0x00, 0xC2) + Field (U2F1, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + U1IR, 4, + Offset (0x84), + ECDX, 2 + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.USB1.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.USB1.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +Device (USB2) +{ + Name (_ADR, 0x00100002) + Name (_PRW, Package (0x02) + { + 0x0E, + 0x03 + }) + + OperationRegion (U2F2, PCI_Config, 0x00, 0xC2) + Field (U2F2, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + U2IR, 4, + Offset (0x84), + ECDX, 2 + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.USB2.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.USB2.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +Device (USB3) +{ + Name (_ADR, 0x00100003) + Name (_PRW, Package (0x02) + { + 0x0E, + 0x03 + }) + + OperationRegion (U2F3, PCI_Config, 0x00, 0xC2) + Field (U2F3, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + U3IR, 4, + Offset (0x84), + ECDX, 2 + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.USB3.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.USB3.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +Device (USB4) +{ + Name (_ADR, 0x00100004) + Name (_PRW, Package (0x02) + { + 0x0E, + 0x03 + }) + + OperationRegion (U2F4, PCI_Config, 0x00, 0xC2) + Field (U2F4, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + U4IR, 4, + Offset (0x84), + ECDX, 2 + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.USB4.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.USB4.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +/* Basic Definition of Ethernet Interface */ +Device (NIC0) +{ + Name (_ADR, 0x00120000) + Name (_PRW, Package (0x02) + { + 0x03, + 0x05 + }) + + OperationRegion (NIC0, PCI_Config, 0x00, 0xC2) + Field (NIC0, ByteAcc, NoLock, Preserve) + { + VID, 16, + Offset (0x04), + CMDR, 3, + Offset (0x3C), + NIIR, 4, + } + + Method (_STA, 0, NotSerialized) + { + If (LNotEqual (_SB.PCI0.NIC0.VID, 0x1106)) + { + Return (0x00) + } + Else + { + If (LEqual (_SB.PCI0.NIC0.CMDR, 0x00)) + { + Return (0x0D) + } + Else + { + Return (0x0F) + } + } + } +} + +/* Very Basic Definition of Sound Controller */ +Device (AC97) +{ + Name (_ADR, 0x00110005) + Name (_PRW, Package (0x02) + { + 0x0D, + 0x05 + }) +} diff --git a/src/mainboard/via/epia_n/acpi_tables.c b/src/mainboard/via/epia_n/acpi_tables.c new file mode 100644 index 0000000..82dac53 --- /dev/null +++ b/src/mainboard/via/epia_n/acpi_tables.c @@ -0,0 +1,185 @@ +/* + * coreboot ACPI Table support + * written by Stefan Reinauer stepan@openbios.org + * ACPI FADT, FACS, and DSDT table support added by + * Nick Barker nick.barker9@btinternet.com, and those portions + * (C) Copyright 2004 Nick Barker + * (C) Copyright 2005 Stefan Reinauer + * (C) Copyright 2009 Jon Harrison bothlyn@blueyonder.co.uk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* + * Most parts of this file copied from via\epia-m\acpi_tables.c, + * and via\epia-m700\acpi_tables.c + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" + +extern const unsigned char AmlCode[]; + +/* + * These 8 macros are copied from <arch/smp/mpspec.h>, I have to do this + * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since + * mainboard/via/... have no mptable.c (so that I can not set + * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. + * So I have to copy these four to here. acpi_fill_madt() needs this. + */ +#define MP_IRQ_POLARITY_DEFAULT 0x0 +#define MP_IRQ_POLARITY_HIGH 0x1 +#define MP_IRQ_POLARITY_LOW 0x3 +#define MP_IRQ_POLARITY_MASK 0x3 +#define MP_IRQ_TRIGGER_DEFAULT 0x0 +#define MP_IRQ_TRIGGER_EDGE 0x4 +#define MP_IRQ_TRIGGER_LEVEL 0xc +#define MP_IRQ_TRIGGER_MASK 0xc + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Nothing to do */ + return current; +} + +unsigned long acpi_fill_slit(unsigned long current) +{ + // Not implemented + return current; +} + +unsigned long acpi_create_madt_lapic_nmis(unsigned long current, u16 flags, + u8 lint) +{ + device_t cpu; + int cpu_index = 0; + + for (cpu = all_devices; cpu; cpu = cpu->next) { + if ((cpu->path.type != DEVICE_PATH_APIC) || + (cpu->bus->dev->path.type != DEVICE_PATH_CPU_CLUSTER)) { + continue; + } + if (!cpu->enabled) + continue; + current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *) + current, cpu_index, flags, lint); + cpu_index++; + } + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x00; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, gsi_base); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long acpi_fill_srat(unsigned long current) +{ + /* No NUMA, no SRAT */ + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16byte */ + start = ALIGN(start, 16); + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + current = ALIGN(current, 64); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + printk(BIOS_DEBUG, "ACPI: * DSDT\n"); + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); +#if 0 + dsdt->checksum = 0; // don't trust intel iasl compiler to get this right + dsdt->checksum = acpi_checksum(dsdt,dsdt->length); +#endif + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt,facs,dsdt); + acpi_add_table(rsdp,fadt); + + /* If we want IOAPIC Support Linux wants it in MADT. */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/via/epia_n/board_info.txt b/src/mainboard/via/epia_n/board_info.txt new file mode 100644 index 0000000..d7bb1d9 --- /dev/null +++ b/src/mainboard/via/epia_n/board_info.txt @@ -0,0 +1,2 @@ +Category: mini +Board URL: http://www.idotpc.com/TheStore/pc/viewCategories.asp?idCategory=56 diff --git a/src/mainboard/via/epia_n/cmos.layout b/src/mainboard/via/epia_n/cmos.layout new file mode 100644 index 0000000..9050c3d --- /dev/null +++ b/src/mainboard/via/epia_n/cmos.layout @@ -0,0 +1,72 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 diff --git a/src/mainboard/via/epia_n/devicetree.cb b/src/mainboard/via/epia_n/devicetree.cb new file mode 100644 index 0000000..d17b96d --- /dev/null +++ b/src/mainboard/via/epia_n/devicetree.cb @@ -0,0 +1,101 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 VIA Technologies, Inc. +## (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip northbridge/via/cn400 # Northbridge + + device cpu_cluster 0 on # APIC cluster + chip cpu/via/c3 # VIA C3 + device lapic 0 on end # APIC + end + end + + device domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE/SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0xC0" # Disable AC/MC97 + register "fn_ctrl_hi" = "0x9d" # Disable USB Direct & LAN Gating + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 off end # USB Direct + device pci 11.0 on # Southbridge LPC + chip superio/winbond/w83697hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 off # IR Port + io 0x60 = 0x000 + end + device pnp 2e.7 off # GPIO 1 + io 0x60 = 0x201 # 0x201 + end + device pnp 2e.8 off # GPIO 5 + io 0x60 = 0x330 # 0x330 + end + device pnp 2e.9 off # GPIO 2, 3,and 4 + io 0x60 = 0x000 # + end + device pnp 2e.a off # ACPI + io 0x60 = 0x000 # + end + device pnp 2e.b on # HWM + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 11.5 off end # AC'97 audio + device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end +end diff --git a/src/mainboard/via/epia_n/dsdt.asl b/src/mainboard/via/epia_n/dsdt.asl new file mode 100644 index 0000000..f8d47ce --- /dev/null +++ b/src/mainboard/via/epia_n/dsdt.asl @@ -0,0 +1,353 @@ +/* + * Minimalist ACPI DSDT table for EPIA-N / NL + * (C) Copyright 2009 Jon Harrison jon.harrison@blueyonder.co.uk + * Heavily based on EPIA-M dstd.asl + * (C) Copyright 2004 Nick Barker Nick.Barker9@btinternet.com + * + */ +DefinitionBlock ("dsdt.aml", "DSDT", 1, "CBT-V2", "CBT-DSDT", 1) +{ + Scope (_PR) + { + Processor (_PR.CPU0, 0x00, 0x00000000, 0x00) {} + } + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * any others would involve declaring the wake up methods + */ + Name (_S0, Package (0x04) + { + 0x00, + 0x00, + 0x00, + 0x00 + }) + Name (_S5, Package (0x04) + { + 0x02, + 0x02, + 0x02, + 0x02 + }) + + /* Global Flag Used to Indicate State of */ + /* ATA Interface */ + Name (ATFL, 0x00) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x01) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + Name (_PRT, Package () { + + Package (0x04) {0x000FFFFF, 0x00, ATAI, 0x00}, // SATA Link A + Package (0x04) {0x000FFFFF, 0x01, ATAI, 0x00}, // SATA Link B + Package (0x04) {0x000FFFFF, 0x02, ATAI, 0x00}, // SATA Link C + Package (0x04) {0x000FFFFF, 0x03, ATAI, 0x00}, // SATA Link D + + Package (0x04) {0x0010FFFF, 0x00, USBI, 0x00}, // USB Link A + Package (0x04) {0x0010FFFF, 0x01, USBI, 0x00}, // USB Link B + Package (0x04) {0x0010FFFF, 0x02, USBI, 0x00}, // USB Link C + Package (0x04) {0x0010FFFF, 0x03, USBI, 0x00}, // USB Link D + + Package (0x04) {0x0011FFFF, 0x00, VT8I, 0x00}, // VT8237 Link A + Package (0x04) {0x0011FFFF, 0x01, VT8I, 0x00}, // VT8237 Link B + Package (0x04) {0x0011FFFF, 0x02, VT8I, 0x00}, // VT8237 Link C + Package (0x04) {0x0011FFFF, 0x03, VT8I, 0x00}, // VT8237 Link D + + Package (0x04) {0x0012FFFF, 0x00, NICI, 0x00}, // LAN Link A + Package (0x04) {0x0012FFFF, 0x01, NICI, 0x00}, // LAN Link B + Package (0x04) {0x0012FFFF, 0x02, NICI, 0x00}, // LAN Link C + Package (0x04) {0x0012FFFF, 0x03, NICI, 0x00}, // LAN Link D + + Package (0x04) {0x0001FFFF, 0x00, 0, 0x10}, // VGA Link A (GSI) + Package (0x04) {0x0001FFFF, 0x01, 0, 0x11}, // VGA Link B (GSI) + Package (0x04) {0x0001FFFF, 0x02, 0, 0x12}, // VGA Link C (GSI) + Package (0x04) {0x0001FFFF, 0x03, 0, 0x13}, // VGA Link D (GSI) + + Package (0x04) {0x0014FFFF, 0x00, 0, 0x12}, // Slot 1 Link C (GSI) + Package (0x04) {0x0014FFFF, 0x01, 0, 0x13}, // Slot 1 Link D (GSI) + Package (0x04) {0x0014FFFF, 0x02, 0, 0x10}, // Slot 1 Link A (GSI) + Package (0x04) {0x0014FFFF, 0x03, 0, 0x11}, // Slot 1 Link B (GSI) + + Package (0x04) {0x0013FFFF, 0x00, 0, 0x13}, // Riser Slot Link D (GSI) + Package (0x04) {0x0013FFFF, 0x01, 0, 0x12}, // Riser Slot Link C (GSI) + Package (0x04) {0x0013FFFF, 0x02, 0, 0x11}, // Riser Slot Link B (GSI) + Package (0x04) {0x0013FFFF, 0x03, 0, 0x10} // Riser Slot Link A (GSI) + + }) + + /* PCI Devices Included Here */ + #include "acpi/sb_physical.asl" + + /* Legacy PNP Devices Defined Here */ + + /* Disable PS2 Mouse Support */ + Device (PS2M) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x09) + } + + Method (_CRS, 0, NotSerialized) + { + Name (BUF1, ResourceTemplate () + { + IRQNoFlags () + {12} + }) + Return (BUF1) + } + } + + /* Disable Legacy PS2 Keyboard Support */ + Device (PS2K) + { + Name (_HID, EisaId ("PNP0303")) + Name (_CID, 0x0B03D041) + Method (_STA, 0, NotSerialized) + { + Return (0x09) + } + + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0060, // Range Minimum + 0x0060, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IO (Decode16, + 0x0064, // Range Minimum + 0x0064, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + IRQNoFlags () + {1} + }) + } + + /* Legacy PIC Description */ + Device (PIC) + { + Name (_HID, EisaId ("PNP0000")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0020, // Range Minimum + 0x0020, // Range Maximum + 0x01, // Alignment + 0x02, // Length + ) + IO (Decode16, + 0x00A0, // Range Minimum + 0x00A0, // Range Maximum + 0x01, // Alignment + 0x02, // Length + ) + IRQNoFlags () + {2} + }) + } + + /* Legacy DMA Description */ + Device (DMA1) + { + Name (_HID, EisaId ("PNP0200")) + Name (_CRS, ResourceTemplate () + { + DMA (Compatibility, BusMaster, Transfer8, ) + {4} + IO (Decode16, + 0x0000, // Range Minimum + 0x0000, // Range Maximum + 0x01, // Alignment + 0x10, // Length + ) + IO (Decode16, + 0x0080, // Range Minimum + 0x0080, // Range Maximum + 0x01, // Alignment + 0x11, // Length + ) + IO (Decode16, + 0x0094, // Range Minimum + 0x0094, // Range Maximum + 0x01, // Alignment + 0x0C, // Length + ) + IO (Decode16, + 0x00C0, // Range Minimum + 0x00C0, // Range Maximum + 0x01, // Alignment + 0x20, // Length + ) + }) + } + + /* Legacy Timer Description */ + Device (TMR) + { + Name (_HID, EisaId ("PNP0100")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0040, // Range Minimum + 0x0040, // Range Maximum + 0x01, // Alignment + 0x04, // Length + ) + IRQNoFlags () + {0} + }) + } + + /* Legacy RTC Description */ + Device (RTC) + { + Name (_HID, EisaId ("PNP0B00")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0070, // Range Minimum + 0x0070, // Range Maximum + 0x04, // Alignment + 0x04, // Length + ) + IRQNoFlags () + {8} + }) + } + + /* Legacy Speaker Description */ + Device (SPKR) + { + Name (_HID, EisaId ("PNP0800")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0061, // Range Minimum + 0x0061, // Range Maximum + 0x01, // Alignment + 0x01, // Length + ) + }) + } + + /* Legacy Math Co-Processor Description */ + Device (COPR) + { + Name (_HID, EisaId ("PNP0C04")) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x00F0, // Range Minimum + 0x00F0, // Range Maximum + 0x01, // Alignment + 0x10, // Length + ) + IRQNoFlags () + {13} + }) + } + + /* General Legacy IO Reservations */ + /* Covering items that are not explicitly reserved */ + /* from coreboot. */ + Device (SYSR) + { + Name (_HID, EisaId ("PNP0C02")) + Name (_UID, 0x01) + Name (_CRS, ResourceTemplate () + { + IO (Decode16, + 0x0010, // Range Minimum + 0x0010, // Range Maximum + 0x01, // Alignment + 0x10, // Length + ) + IO (Decode16, + 0x0022, // Range Minimum + 0x0022, // Range Maximum + 0x01, // Alignment + 0x1E, // Length + ) + IO (Decode16, + 0x0044, // Range Minimum + 0x0044, // Range Maximum + 0x01, // Alignment + 0x1C, // Length + ) + IO (Decode16, + 0x0062, // Range Minimum + 0x0062, // Range Maximum + 0x01, // Alignment + 0x02, // Length + ) + IO (Decode16, + 0x0065, // Range Minimum + 0x0065, // Range Maximum + 0x01, // Alignment + 0x0B, // Length + ) + IO (Decode16, + 0x0074, // Range Minimum + 0x0074, // Range Maximum + 0x01, // Alignment + 0x0C, // Length + ) + IO (Decode16, + 0x0091, // Range Minimum + 0x0091, // Range Maximum + 0x01, // Alignment + 0x03, // Length + ) + IO (Decode16, + 0x00A2, // Range Minimum + 0x00A2, // Range Maximum + 0x01, // Alignment + 0x1E, // Length + ) + IO (Decode16, + 0x00E0, // Range Minimum + 0x00E0, // Range Maximum + 0x01, // Alignment + 0x10, // Length + ) + IO (Decode16, + 0x04D0, // Range Minimum + 0x04D0, // Range Maximum + 0x01, // Alignment + 0x02, // Length + ) + IO (Decode16, + 0x0294, // Range Minimum + 0x0294, // Range Maximum + 0x01, // Alignment + 0x04, // Length + ) + }) + } + + #include "acpi/irq_links.asl" + #include "acpi/pci_init.asl" + + } //End of PCI0 + + } // End of _SB + +} // End of Definition Block diff --git a/src/mainboard/via/epia_n/irq_tables.c b/src/mainboard/via/epia_n/irq_tables.c new file mode 100644 index 0000000..9c1ee4e --- /dev/null +++ b/src/mainboard/via/epia_n/irq_tables.c @@ -0,0 +1,47 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * + * Contains the IRQ Routing Table dumped directly from your + * memory, which BIOS sets up. + * + * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx + */ + +#ifdef GETPIR +#include "pirq_routing.h" +#else +#include <arch/pirq_routing.h> +#endif + +static const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0x1c00, /* IRQs devoted exclusively to PCI usage */ + 0x1106, /* Vendor */ + 0x3227, /* Device */ + 0, /* Miniport */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xf, /* u8 checksum. This has to be set to some + value that would give 0 after the sum of all + bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x14<<3)|0x0, {{0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}}, 0x1, 0x0}, + {0x00,(0x13<<3)|0x0, {{0x05, 0xdeb8}, {0x03, 0xdeb8}, {0x02, 0xdeb8}, {0x01, 0xdeb8}}, 0x2, 0x0}, + {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, + } +}; +#ifndef GETPIR + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr, &intel_irq_routing_table); +} +#endif diff --git a/src/mainboard/via/epia_n/mptable.c b/src/mainboard/via/epia_n/mptable.c new file mode 100644 index 0000000..de25d0e --- /dev/null +++ b/src/mainboard/via/epia_n/mptable.c @@ -0,0 +1,50 @@ +/* generated by MPTable, version 2.0.15*/ +/* as modified by RGM for coreboot */ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +static void *smp_write_config_table(void *v) +{ + struct mp_config_table *mc; + int isa_bus; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + + mptable_init(mc, LOCAL_APIC_ADDR); + + smp_write_processors(mc); + mptable_write_buses(mc, NULL, &isa_bus); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); + + mptable_add_isa_interrupts(mc, isa_bus, 0x2, 0); + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x40, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x41, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x42, 0x2, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x46, 0x2, 0x16); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x48, 0x2, 0x17); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x3d, 0x2, 0x14); +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + mptable_lintsrc(mc, 0x0); + /* There is no extension information... */ + + /* Compute the checksums */ + return mptable_finalize(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/via/epia_n/romstage.c b/src/mainboard/via/epia_n/romstage.c new file mode 100644 index 0000000..2ede8d8 --- /dev/null +++ b/src/mainboard/via/epia_n/romstage.c @@ -0,0 +1,136 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 VIA Technologies, Inc. + * (Written by Aaron Lwe aaron.lwe@gmail.com for VIA) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/hlt.h> +#include <console/console.h> +#include "northbridge/via/cn400/raminit.h" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "drivers/pc80/udelay_io.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "southbridge/via/vt8237r/early_smbus.c" +#include "superio/winbond/w83697hf/early_serial.c" +#include <spd.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1) +#define DUMMY_DEV PNP_DEV(0x2e, 0) + +static const struct mem_controller ctrl = { + .d0f0 = 0x0000, + .d0f2 = 0x2000, + .d0f3 = 0x3000, + .d0f4 = 0x4000, + .d0f7 = 0x7000, + .d1f0 = 0x8000, + .channel0 = { DIMM0 }, +}; + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/via/cn400/raminit.c" + +static void enable_mainboard_devices(void) +{ + device_t dev; + u8 reg; + + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Southbridge not found!!!\n"); + + /* bit=0 means enable function (per VT8237R datasheet) + * 7 17.6 MC97 + * 6 17.5 AC97 + * 5 16.1 USB 2 + * 4 16.0 USB 1 + * 3 15.0 SATA and PATA + * 2 16.2 USB 3 + * 1 16.4 USB EHCI + */ + pci_write_config8(dev, 0x50, 0xC0); + + /*bit=0 means enable internal function (per VT8237R datasheet) + * 7 USB Device Mode + *bit=1 means enable internal function (per VT8237R datasheet) + * 6 Reserved + * 5 LAN Controller Clock Gating + * 4 LAN Controller + * 3 Internal RTC + * 2 Internal PS2 Mouse + * 1 Internal KBC Configuration + * 0 Internal Keyboard Controller + */ + pci_write_config8(dev, 0x51, 0x9d); +} + +static void enable_shadow_ram(void) +{ + unsigned char shadowreg; + + shadowreg = pci_read_config8(ctrl.d0f3, 0x82); + /* 0xf0000-0xfffff Read/Write*/ + shadowreg |= 0x30; + pci_write_config8(ctrl.d0f3, 0x82, shadowreg); +} + +#include <cpu/intel/romstage.h> +static void main(unsigned long bist) +{ + unsigned long x; + device_t dev; + + /* Enable multifunction for northbridge. */ + pci_write_config8(ctrl.d0f0, 0x4f, 0x01); + + w83697hf_set_clksel_48(DUMMY_DEV); + w83697hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + console_init(); + + enable_smbus(); + smbus_fixup(&ctrl); + + /* Halt if there was a built-in self test failure. */ + report_bist_failure(bist); + + print_debug("Enabling mainboard devices\n"); + enable_mainboard_devices(); + + print_debug("Enable F-ROM Shadow RAM\n"); + enable_shadow_ram(); + + print_debug("Setup CPU Interface\n"); + c3_cpu_setup(ctrl.d0f2); + + ddr_ram_setup(); + + if (bist == 0) + early_mtrr_init(); +}